3Com Network Router External ISDN Modem User Manual

3COMIMPACT™ IQ  
®
EXTERNAL ISDN MODEM  
QUICK START INSTRUCTIONS  
Part Number 09-0988-000 July 1996  
The following information will help you install and configure  
the 3ComImpact IQ External ISDN Modem. Refer to the  
3ComImpact IQ External ISDN Modem User Guide for additional  
information.  
Site Preparation  
To install and use the 3C882 ISDN modem successfully, you  
must have the following:  
Correct ISDN service installed at your location with an  
available ISDN RJ-11 outlet. If you have not ordered ISDN  
service yet, see Appendix A of the 3ComImpact IQ External  
ISDN Modem User Guide.  
ISDN telephone numbers.  
A computer that meets U standards in the United States or  
is certified to CSA standards in Canada. Refer to the User  
Guide section IBM PC or Compatible Requirements” for an  
IBM or IBM-compatible PC or the section Apple Macintosh  
Requirements” for an Appl Macintosh® computer.  
For Macintosh users, one 25-pin male to mini DIN 8-pin male  
serial cable. Refer to the information enclosed in your 3C882  
ISDN modem package to order a free cable. If you are  
providing your own serial cable, ensure that it meets the pin  
specifications provided in Appendix C of the User Guide.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuring the 3C882 ISDN Modem Using a PC  
3
5 If you are connecting analog equipment, connect one  
end of the RJ-11 connector into the RJ-11 modular jack  
labeled with a telephone icon on the back of the ISDN  
modem.  
6 Connect the other RJ-11 end into the appropriate RJ-11  
port on the analog device.  
7 Connect the 3C882 ISDN modem power cable to the  
9 VDC power connector on the back panel of the ISDN  
modem.  
8 Plug the transformer end of the power cable into a  
surge-protected standard 110 VAC wall outlet.  
Configuring the 3C882 ISDN Modem Using a PC  
To install the 3C882 ISDN modem software:  
1 Insert the 3ComImpact IQ Windows & DOS Installation  
Diagnostic Utilities diskette into an available floppy drive.  
2 If you are using Windows 95, select Run from the Start  
menu. If you are using Windows 3.x, select Run from the File  
menu. In the Run dialog box, type: a:setup.  
3 Click OK.  
4 Double-click the 3ComImpact IQ globe icon to run the  
SPID Wizard configuration program.  
A message box indicates that the SPID Wizard has started.  
The dialog box for the first telephone number appears.  
5 Enter the telephone number for your ISDN line.  
6 Click Next.  
The SPID for telephone number one is automatically  
configured.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
3COMIMPACTIQ EXTERNAL ISDN MODEM QUICK START INSTRUCTIONS  
7 If you have a second telephone number for your ISDN line,  
enter it, and then click Next. If you do not have a second  
telephone number for your ISDN line, leave the field  
incomplete, and then click Done.  
When the automatic configuration process is complete, the  
on-line registration dialog box appears. Enter your  
information and then click Register Now. After your  
information is received, the Configuration dialog box  
appears.  
This completes the basic configuration procedure.  
Refer to the User Guide for instructions regarding advanced  
configuration and placing calls.  
Configuring the 3C882 ISDN Modem Using a  
Macintosh Computer  
To install the 3C882 ISDN modem software in an Apple  
Macintosh computer:  
1 Insert the 3ComImpact IQ Installer Diagnostic Utilities  
software utility diskette into the floppy drive and then  
double-click the diskette icon.  
2 Double-click the 3ComImpact IQ Installer icon.  
A message box appears.  
3 Click Continue.  
A message box asks you to confirm that you would like to  
install the 3C882 software.  
4 Click Continue.  
5 Select the location on your hard drive where you would  
like the 3ComImpact IQ folder. If you do not want to use  
the default folder name, change the name. Click Install.  
6 Click OK.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuring the 3C882 ISDN Modem Using a Macintosh Computer  
5
7 Double-click the 3ComImpact IQ 3.0 icon to run the SPID  
Wizard configuration program.  
The Select Modem Port screen appears.  
8 Select the port to which the 3C882 ISDN modem is  
connected and then click OK.  
The SPID Wizard start screen appears.  
9 Click Next.  
After the SPID Wizard checks the ISDN layer 1 status, and  
configures the switch type, the First Telephone Number  
screen appears.  
10 Enter the first telephone number for your ISDN line and  
then click Next.  
After SPID Wizard configures the SPID for the rst telephone  
number, the Second Telephone Number screen appears.  
If your ISDN line has a second telephone number assigned to  
it, enter it here and then click Next. If it does not have a  
second telephone number assigned to it, leave the field as is  
and then click Done.  
If you entered a second telephone number for your ISDN line,  
the SPID for the second telephone number is configured.  
A message box indicates that the configuration was  
successful.  
11 Click Done.  
When the automatic configuration process is complete, the  
on-line registration dialog box appears. Enter your  
information and then click Register Now. After your  
information is sent, the Configuration dialog box appears.  
This completes the basic configuration procedure.  
Refer to the User Guide for instructions regarding advanced  
configuration and placing calls.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1996, 3Com Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Air Comm Systems Music Mixer ACS 2010 User Manual
Air King Fan 9224 User Manual
AIS Network Router AI2524 User Manual
Aiwa Car Stereo System CT X411YU User Manual
Allied Telesis Network Card AT iMG646MOD User Manual
American Standard Indoor Furnishings 0495221 User Manual
Axor Plumbing Product 13898000 User Manual
Bacharach Carbon Monoxide Alarm 3015 4256 User Manual
Beko Cordless Telephone BD 220 User Manual
Beko Refrigerator CNE63721 DE User Manual