Intel D845WN User Manual

Intel® Desktop Boards  
D845HV and D845WN  
Product Guide  
Order Number: A61038-001  
Contents  
1 Desktop Board Features  
Components......................................................................................................................... 9  
Processor............................................................................................................................11  
Main Memory ......................................................................................................................11  
Intel® 845 Chipset ...............................................................................................................12  
Intel® 82845 Memory Controller Hub (MCH)...............................................................12  
Intel® 82801BA I/O Controller Hub (ICH2)..................................................................13  
Firmware Hub (FWH) .................................................................................................13  
Input/Output (I/O) Controller................................................................................................13  
Real-Time Clock..................................................................................................................13  
USB Support .......................................................................................................................14  
PCI Enhanced IDE Interface ...............................................................................................14  
Expansion Slots...................................................................................................................14  
Accelerated Graphics Port (AGP)...............................................................................15  
Communication and Networking Riser (CNR) (Optional) ............................................15  
Audio Subsystem ................................................................................................................15  
BIOS ...................................................................................................................................15  
PCI Auto Configuration...............................................................................................15  
IDE Auto Configuration...............................................................................................16  
Security Passwords....................................................................................................16  
LAN Subsystem (Optional)..................................................................................................16  
LAN Subsystem Software...........................................................................................16  
RJ-45 LAN Connector LEDs.......................................................................................17  
Speaker...............................................................................................................................17  
Battery.................................................................................................................................17  
Power Management Features .............................................................................................17  
Resume on Ring.........................................................................................................18  
Instantly Available Technology ...................................................................................18  
2 Installing and Replacing Desktop Board Components  
Before You Begin ................................................................................................................21  
Installing the I/O Shield .......................................................................................................22  
Installing and Removing the Desktop Board........................................................................23  
Installing and Removing a Processor ..................................................................................25  
Installing the Processor Fan Heatsink Retention Mechanism Base ............................25  
Installing a Processor .................................................................................................27  
Installing the Processor Fan Heatsink ........................................................................27  
Connecting the Processor Fan Heatsink Cable ..........................................................28  
Removing a Processor ...............................................................................................28  
iii  
Intel Desktop Boards D845HV and D845WN Product Guide  
Installing and Removing Memory ........................................................................................29  
DIMM Installation Guidelines......................................................................................29  
Installing DIMMs.........................................................................................................29  
Removing DIMMs.......................................................................................................31  
Installing and Removing the AGP Retention Mechanism and Card.....................................32  
Installing the AGP Card Retention Mechanism...........................................................32  
Installing an AGP Card...............................................................................................34  
Removing the AGP Card from the Retention Mechanism...........................................34  
Removing the AGP Card Retention Mechanism.........................................................35  
Connecting the IDE Cable...................................................................................................36  
Setting the BIOS Configuration Jumper Block.....................................................................37  
Clearing Passwords ............................................................................................................38  
Replacing the Battery..........................................................................................................39  
3 Updating the BIOS  
Updating the BIOS with the Intel® Express BIOS Update Utility ..........................................43  
Updating the BIOS with the Intel® Flash Memory Update Utility ..........................................44  
Obtaining the BIOS Update File..................................................................................44  
Updating the BIOS......................................................................................................44  
Recovering the BIOS..................................................................................................45  
4 Using the Setup Program  
Maintenance Menu..............................................................................................................48  
Extended Configuration Submenu..............................................................................49  
Main Menu ..........................................................................................................................50  
Advanced Menu ..................................................................................................................51  
PCI Configuration Submenu.......................................................................................52  
Boot Configuration Submenu......................................................................................53  
Peripheral Configuration Submenu.............................................................................54  
IDE Configuration Submenu.......................................................................................56  
Primary/Secondary IDE Master/Slave Submenus.......................................................57  
Diskette Configuration Submenu ................................................................................58  
Event Log Configuration Submenu.............................................................................59  
Video Configuration Submenu....................................................................................60  
Security Menu .....................................................................................................................61  
Power Menu........................................................................................................................62  
ACPI Submenu...........................................................................................................62  
Boot Menu...........................................................................................................................63  
Boot Device Priority Submenu....................................................................................64  
Hard Disk Drives Submenu ........................................................................................65  
Removable Devices Submenu....................................................................................65  
ATAPI CD-ROM Drives ..............................................................................................66  
Exit Menu............................................................................................................................66  
iv  
Contents  
5 Technical Reference  
Board Connectors ...............................................................................................................67  
Back Panel Connectors ..............................................................................................68  
Midboard Connectors .................................................................................................69  
Front Panel Connectors..............................................................................................73  
Desktop Board Resources...................................................................................................74  
Memory Map ..............................................................................................................74  
DMA Channels ...........................................................................................................74  
I/O Map ......................................................................................................................75  
Interrupts....................................................................................................................77  
A Error Messages and Indicators  
BIOS Beep Codes...............................................................................................................79  
BIOS Error Messages .........................................................................................................80  
B Regulatory Compliance  
Safety Regulations ..............................................................................................................83  
EMC Regulations ................................................................................................................83  
Product Certification Markings.............................................................................................84  
Installation Precautions .......................................................................................................85  
Installation Instructions........................................................................................................85  
Ensure Electromagnetic Compatibility (EMC) Compliance .........................................86  
Chassis and Component Certifications.......................................................................86  
Prevent Power Supply Overload.................................................................................86  
Place Battery Marking ................................................................................................87  
Use Only for Intended Applications.............................................................................87  
Figures  
1. D845HV Board Components.......................................................................................... 9  
2. D845WN Board Components........................................................................................10  
3. Location of Standby Power Indicator.............................................................................18  
4. Installing the I/O Shield.................................................................................................22  
5. D845HV Board Mounting Holes....................................................................................23  
6. D845WN Board Mounting Holes...................................................................................24  
7. Processor Fan Heatsink RM Mounting Holes................................................................25  
8. Installing the Processor Fan Heatsink RM Base to the Board.......................................26  
9. Installing a Processor....................................................................................................27  
10. Connecting the Processor Fan Heatsink Cable to the Processor Fan Connector .........28  
11. Installing a Memory Module..........................................................................................30  
12. AGP Card with Retention Notch....................................................................................32  
13. Installing the AGP Card Retention Mechanism .............................................................33  
14. Removing the AGP Card ..............................................................................................34  
15. Removing the AGP Card Retention Mechanism ...........................................................35  
16. Connecting the IDE Cable.............................................................................................36  
17. Location of the BIOS Configuration Jumper Block ........................................................37  
18. Removing the Battery ...................................................................................................41  
19. Back Panel Connectors ................................................................................................68  
20. Audio Connectors .........................................................................................................69  
v
Intel Desktop Boards D845HV and D845WN Product Guide  
21. Power and Hardware Control Connectors.....................................................................70  
22. D845HV Board Add-in Card and Peripheral Interface Connectors................................71  
23. D845WN Board Add-in Card and Peripheral Interface Connectors...............................72  
24. Front Panel Connectors................................................................................................73  
Tables  
1. Feature Summary.......................................................................................................... 7  
2. Processors Supported by the Desktop Board ...............................................................11  
3. RJ-45 LAN Connector LEDs .........................................................................................17  
4. Standby Current Requirements.....................................................................................19  
5. Jumper Settings for the BIOS Setup Program Modes (J9G1).......................................37  
6. BIOS Setup Program Menu Bar....................................................................................47  
7. BIOS Setup Program Function Keys.............................................................................48  
8. Maintenance Menu .......................................................................................................48  
9. Extended Configuration Submenu ................................................................................49  
10. Main Menu....................................................................................................................50  
11. Advanced Menu............................................................................................................51  
12. PCI Configuration Submenu .........................................................................................52  
13. Boot Configuration Submenu........................................................................................53  
14. Peripheral Configuration Submenu ...............................................................................54  
15. IDE Configuration Submenu .........................................................................................56  
16. Primary/Secondary IDE Master/Slave Submenus.........................................................57  
17. Diskette Configuration Submenu ..................................................................................58  
18. Event Log Configuration Submenu ...............................................................................59  
19. Video Configuration Submenu ......................................................................................60  
20. Security Menu...............................................................................................................61  
21. Power Menu..................................................................................................................62  
23. Boot Menu ....................................................................................................................63  
24. Boot Device Priority Submenu ......................................................................................64  
25. Hard Disk Drives Submenu...........................................................................................65  
26. Removable Devices Submenu......................................................................................65  
27. ATAPI CD-ROM Drives Submenu.................................................................................66  
28. Exit Menu......................................................................................................................66  
29. System Memory Map....................................................................................................74  
30. DMA Channels..............................................................................................................74  
31. I/O Map.........................................................................................................................75  
32. Interrupts ......................................................................................................................77  
33. Beep Codes..................................................................................................................79  
34. BIOS Error Messages...................................................................................................80  
35. Safety Regulations........................................................................................................83  
36. EMC Regulations..........................................................................................................83  
vi  
Desktop Board Features  
1 Desktop Board Features  
NOTE  
The D845HV board layout was used for illustrations unless otherwise noted.  
Table 1 describes the major features of the boards.  
Table 1.  
Feature Summary  
Form Factors  
microATX at 9.6 inches by 9.6 inches (D845HV board)  
ATX at 12 inches by 9.6 inches (D845WN board)  
Support for an Intel® Pentium® 4 processor in an mPGA-478 socket  
Three SDRAM DIMM sockets.  
Processor  
Memory  
Designed to support up to 3.0 GB of system memory  
NOTE  
The D845HV and D845WN desktop boards have been designed to  
support DIMMs based on 512 Mbit technology up to 3 GB, but this  
technology has not been validated on these boards. For more  
information about the latest list of tested memory, refer to the Intel  
World Wide Web site at:  
Chipset  
Intel® 845 chipset, consisting of:  
Intel® 82845 Memory Controller Hub (MCH) with Accelerated Hub  
Architecture (AHA) bus  
Intel® 82801BA I/O Controller Hub (ICH2) with AHA bus  
4 Mbit Firmware Hub (FWH)  
I/O Control  
SMSC LPC47M142 low pin count (LPC) interface I/O controller  
LAN (optional)  
Intel® 82562ET 10/100 Mbit/sec Platform LAN Connect (PLC) device and  
RJ-45 connector  
Graphics  
Audio  
AGP connector supporting 1.5 V 4X and 2X AGP cards  
Analog Devices Inc. AD1885 analog CODEC (AC 97) featuring SoundMAX†  
with SPXsoftware support  
Peripheral Interfaces  
Up to seven Universal Serial Bus (USB) ports  
Four ports routed to the back panel  
Two ports routed to the front panel USB connector  
One port routed to the optional CNR  
Two IDE interfaces with Ultra DMA-33 and ATA-66/100 support  
One diskette drive interface  
One parallel port  
Two serial ports (one via a board connector)  
PS/2keyboard and mouse ports  
continued  
7
Intel Desktop Boards D845HV and D845WN Product Guide  
Table 1.  
Feature Summary (continued)  
D845HV board:  
Three PCI bus add-in card connectors  
Expansion Capabilities  
One AGP connector  
One optional CNR connector (slot shared with PCI bus connector 3)  
D845WN board:  
Six PCI bus add-in card connectors  
One AGP connector  
One optional CNR connector (slot shared with PCI bus connector 6)  
BIOS  
Intel/AMI BIOS.  
4 Mbit symmetrical flash memory  
Support for SMBIOS  
Power Management  
Management Features  
Support for Advanced Configuration and Power Interface (ACPI)  
Support for Instantly Available PC (IAPC)  
Support for Plug & Play  
Hardware monitor with:  
Two fan sensing inputs used to monitor fan activity  
Remote diode temperature sensing  
Voltage sensing to detect out of range values  
Support for PCI Local Bus Specification Revision 2.2  
Suspend to RAM (STR) support  
Wake on USB, PCI, CNR, RS-232, PS/2, LAN, and front panel  
SCSI hard drive activity LED connector for the front panel  
Speaker  
Instantly Available PC  
Other Features  
NOTE  
For information about Intel® desktop boards, including technical product specifications, BIOS  
updates, and device drivers, go to the Intel World Wide Web site at:  
8
Desktop Board Features  
Components  
Figure 1 shows the location of the major components on the D845HV board.  
A
B C  
D
E
BB  
AA  
F
G
Z
H
Y
X
I
J
K
W
V
U
T
S
Q
N
M
L
R
P
O
OM11978  
A
B
C
D
E
F
G
H
I
CD-ROM connector (ATAPI)  
O
P
Secondary IDE connector  
Speaker  
Auxiliary line-in connector (ATAPI)  
AGP connector  
Q
R
S
Intel 82801BA I/O Controller Hub (ICH2)  
SCSI hard drive activity LED connector  
Chassis intrusion connector  
Front chassis fan connector  
Alternate power/sleep LED connector  
Front panel connector  
Back panel connectors  
12 V processor core voltage connector  
Rear chassis fan connector (tachometer input)  
Intel 82845 Memory Controller Hub (MCH)  
Processor socket  
T
U
V
Processor fan connector (tachometer input)  
DIMM sockets  
W
X
Front panel USB connector  
BIOS configuration jumper  
Battery  
J
K
L
Serial port B connector  
Y
Power connector  
Z
PCI bus add-in card connectors  
M
Diskette drive connector  
AA  
Communication and Networking Riser (CNR)  
(optional)  
N
Primary IDE connector  
BB  
Front panel audio connector  
Figure 1. D845HV Board Components  
9
Intel Desktop Boards D845HV and D845WN Product Guide  
Figure 2 shows the location of the major components on the D845WN board.  
A B C  
D
E
BB  
AA  
F
G
Z
H
Y
X
I
J
K
W
V
U
T
S
R
Q
P
N
M
L
O
OM12039  
A
B
C
D
E
F
G
H
I
CD-ROM connector (ATAPI)  
O
P
Secondary IDE connector  
Speaker  
Auxiliary line-in connector (ATAPI)  
AGP connector  
Q
R
S
Intel 82801BA I/O Controller Hub (ICH2)  
SCSI hard drive activity LED connector  
Chassis intrusion connector  
Front chassis fan connector  
Alternate power/sleep LED connector  
Front panel connector  
Back panel connectors  
12 V processor core voltage connector  
Rear chassis fan connector (tachometer input)  
Intel 82845 Memory Controller Hub (MCH)  
Processor socket  
T
U
V
Processor fan connector (tachometer input)  
DIMM sockets  
W
X
Front panel USB connector  
BIOS configuration jumper  
Battery  
J
K
L
Serial port B connector  
Y
Power connector  
Z
PCI bus add-in card connectors  
M
Diskette drive connector  
AA  
Communication and Networking Riser (CNR)  
(optional)  
N
Primary IDE connector  
BB  
Front panel audio connector  
Figure 2. D845WN Board Components  
10  
Desktop Board Features  
Processor  
CAUTION  
Failure to use an ATX12V power supply, or not connecting the additional power supply lead to the  
D845HV or D845WN boards may result in damage to the desktop board and/or power supply.  
The boards support a single Intel Pentium 4 processor. Processors are not included with the board  
and must be purchased separately.  
The processor connects to the board through the mPGA 478-pin socket. The Intel Pentium 4  
processor may be removed and replaced to accommodate supported higher speed processors.  
The board supports the processors listed in Table 2.  
Table 2.  
Type  
Processors Supported by the Desktop Board  
Designation  
System Bus Frequency L2 Cache Size  
400 MHz 256 KB  
Intel Pentium 4 processor 1.4, 1.5, 1.6, 1.7, and  
in an mPGA-478 package 1.8 GHz  
For the latest information on processor support for the D845HV and D845WN boards, refer to the  
Intel World Wide Web site at:  
For instructions on installing or upgrading the processor, see Chapter 2 on page 21.  
The D845HV and D845WN boards require an ATX12V compliant power supply to function  
according to desktop board specifications. Both boards have two ATX12V compliant power  
supply connectors that are needed to provide extra power to the Intel 845 chipset and Intel  
Pentium 4 processor.  
Items A and E in Figure 21 on page 70 show the two power connector locations.  
Main Memory  
NOTE  
To be fully compliant with all applicable Intel® SDRAM memory specifications, the board should  
be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your  
memory modules do not support SPD, you will see a notification to this effect on the screen at  
power up. The BIOS will attempt to configure the memory controller for normal operation.  
The boards supports system memory as defined below:  
Up to three 168-pin SDRAM Dual Inline Memory Modules (DIMMs) with gold-plated  
contacts  
PC133 SDRAM only  
11  
Intel Desktop Boards D845HV and D845WN Product Guide  
64 Mbit, 128 Mbit, and 256 Mbit technologies for the following memory configurations:  
32 MB to 384 MB (64 Mbit technology)  
Up to 768 MB (128 Mbit technology)  
Up to 1.5 GB (256 Mbit technology)  
NOTE  
The D845HV and D845WN desktop boards have been designed to support DIMMs based on  
512 Mbit technology up to 3 GB, but this technology has not been validated on these boards. For  
more information about the latest list of tested memory, refer to the Intel World Wide Web site at:  
Unbuffered and non-registered single or double-sided DIMMs  
Serial Presence Detect (SPD) memory  
Non-ECC and ECC DIMMs  
3.3 V memory only  
NOTE  
For information about vendors that support these memory requirements, refer to the D845HV or  
D845WN link on this Intel World Wide Web site:  
For information about installing memory, see Chapter 2 starting on page 21.  
Intel® 845 Chipset  
The Intel 845 chipset consists of the following devices:  
Intel 82845 Memory Controller Hub (MCH) with AHA bus  
Intel 82801BA I/O Controller Hub (ICH2) with AHA bus  
Firmware Hub (FWH)  
Intel® 82845 Memory Controller Hub (MCH)  
The MCH provides the processor, system memory, AGP, and hub interfaces in the  
Intel 845 chipset platform. Features on D845HV and D845WN boards includes:  
Single processor support with 400 MHz data transfer rate  
Support for up to 1.5 GB (with 256 Mbit technology) SDR-SDRAM at 133 MHz operation  
1.5 V AGP interface with 4X Side Band Addressing (SBA)/data transfer and 2X and 4X  
fast write  
12  
Desktop Board Features  
Intel® 82801BA I/O Controller Hub (ICH2)  
The Intel 82801BA I/O Controller Hub integrates many I/O functions and provides the I/O  
subsystem with access to the rest of the platform. ICH2 features on D845HV and D845WN  
boards includes:  
Integrated IDE controller supports two Ultra DMA-33 and ATA-66/100 channels, BMIDE  
and PIO modes  
SMBus interface  
FWH interface  
Low Pin Count (LPC) interface  
AC’97 2.1 compliant link for audio and telephony CODECs  
Integrated Intel 82562ET 10/100 Mbit/sec Platform LAN Connect (PLC) device for interfacing  
the ICH2 LAN connect interface to LAN connect component  
Two UHCI USB 1.1 compliant host controllers with four ports (additional ports are provided  
by the I/O controller)  
Firmware Hub (FWH)  
The 4 Mbit Firmware Hub has these features:  
System BIOS  
System security and management logic  
Input/Output (I/O) Controller  
The SMSC LPC47M142 ultra I/O controller features the following:  
Low pin count (LPC) interface  
3.3 V operation  
Two serial ports (one via a board connector)  
One parallel port with Extended Capabilities Port (ECP) and Enhanced Parallel Port  
(EPP) support  
Serial IRQ interface compatible with serialized IRQ support for PCI systems  
PS/2-style mouse and keyboard interfaces  
Interface for one 1.2 MB, 1.44 MB, or 2.88 MB diskette drive  
Intelligent power management, including a programmable wake up event interface  
PCI power management support  
Two fan tachometer inputs  
Real-Time Clock  
The desktop boards have a time-of-day clock and 100-year calendar. A battery on the desktop  
board keeps the clock current when the computer is turned off.  
13  
Intel Desktop Boards D845HV and D845WN Product Guide  
USB Support  
NOTE  
Computer systems that have an unshielded cable attached to a USB port might not meet FCC  
Class B requirements, even if no device or a low-speed USB device is attached to the cable. Use a  
shielded cable that meets the requirements for a full-speed USB device.  
The boards support up to seven USB 1.1 ports via the ICH2 and I/O controller; four ports routed to  
the back panel, two to the front panel connector, and one to the optional CNR. To attach additional  
devices, connect an external hub to either of the built-in ports. The board supports the standard  
universal host controller interface (UHCI) and takes advantage of standard software drivers written  
to be compatible with UHCI.  
PCI Enhanced IDE Interface  
The ICH2s IDE interface handles the exchange of information between the processor and  
peripheral devices like hard disks, CD-ROM drives, and Iomega Zipdrives inside the computer.  
The interface supports:  
Up to four IDE devices (such as hard drives)  
ATAPI devices (such as CD-ROM drives)  
PIO Mode 3 and PIO Mode 4 devices  
Ultra DMA-33 and ATA-66/100 protocols  
Laser servo (LS-120) drives  
Expansion Slots  
The D845HV and D845WN boards have the following add-in card connectors:  
The D845HV board has:  
Three PCI bus add-in card connectors (PCI bus connector 3 slot shared with CNR)  
One AGP connector  
One optional CNR connector (slot shared with PCI bus connector 3)  
The D845WN board has:  
Six PCI bus add-in card connectors (PCI bus connector 6 slot shared with CNR)  
One AGP connector  
One optional CNR connector (slot shared with PCI bus connector 6)  
14  
Desktop Board Features  
Accelerated Graphics Port (AGP)  
NOTE  
The D845HV and D845WN boards are only compatible with 1.5 V AGP cards.  
AGP is a high-performance interface for graphics-intensive applications, such as 3D graphics.  
AGP is independent of the PCI bus and is intended for exclusive use with graphical  
display devices.  
The AGP connector supports 1.5 V AGP 4X and 2X add-in cards. The AGP card retention  
mechanism is used only with cards with retention notches (see Figure 12 on page 32). For  
information about installing the AGP card retention mechanism and an AGP card,  
see Chapter 2 on page 21.  
Communication and Networking Riser (CNR) (Optional)  
The optional CNR provides an interface that supports various features such as audio, modem,  
USB, and LAN.  
Audio Subsystem  
The audio subsystem features the following:  
Intel 82801BA ICH2  
Analog Devices AD1885 analog codec (AC 97)  
NOTE  
The line out connector, located on the back panel, is designed to power either headphones or  
amplified speakers only. Poor audio quality may occur if passive (non-amplified) speakers are  
connected to this output.  
Audio drivers and utilities are available from Intels World Wide Web site:  
BIOS  
The BIOS provides the Power-On Self-Test (POST), the BIOS Setup program, the PCI and IDE  
auto-configuration utilities, and the video BIOS. The BIOS is stored in the Firmware Hub.  
The BIOS can be updated by following the instructions in Chapter 3 on page 43.  
PCI Auto Configuration  
If you install a PCI add-in card in your computer, the PCI auto-configuration utility in the BIOS  
automatically detects and configures the resources (IRQs, DMA channels, and I/O space) for that  
add-in card. You do not need to run the BIOS Setup program after you install a PCI add-in card.  
15  
Intel Desktop Boards D845HV and D845WN Product Guide  
IDE Auto Configuration  
If you install an IDE device (such as a hard drive) in your computer, the IDE auto-configuration  
utility in the BIOS automatically detects and configures the device for your computer. You do not  
need to run the BIOS Setup program after installing an IDE device. You can override the auto-  
configuration options by specifying manual configuration in the BIOS Setup program.  
To use ATA-66/100 features, the following items are required:  
An ATA-66/100 peripheral device  
An ATA-66/100 compatible cable  
ATA-66/100 operating system device drivers  
Security Passwords  
The BIOS includes security features that restrict whether the BIOS Setup program can be accessed  
and who can boot the computer. A supervisor password and a user password can be set for the  
Setup and for booting the computer, with the following restrictions:  
The supervisor password gives unrestricted access to view and change all Setup options. If  
only the supervisor password is set, pressing <Enter> at the password prompt of Setup gives  
the user restricted access to Setup.  
If both the supervisor and user passwords are set, you must enter either the supervisor  
password or the user password to access Setup. Setup options are then available for viewing  
and changing depending on whether the supervisor or user password was entered.  
Setting a user password restricts who can boot the computer. The password prompt is  
displayed before the computer is booted. If only the supervisor password is set, the computer  
boots without asking for a password. If both passwords are set, you can enter either password  
to boot the computer.  
LAN Subsystem (Optional)  
The optional Intel 82562ET (with the Intel 82801BA ICH2) provides a Fast PCI LAN subsystem  
providing both 10Base-T and 100Base-TX connectivity. The Intel 82562ET provides the  
following functions:  
Basic 10/100 Ethernet LAN connectivity  
Supports RJ-45 connector with status indicator LEDs  
Programmable transit threshold  
Configurable EEPROM that contains the MAC address  
LAN Subsystem Software  
For LAN software and drivers, refer to the D845HV or D845WN link on Intels World Wide Web  
site at:  
16  
Desktop Board Features  
RJ-45 LAN Connector LEDs  
Two LEDs are built into the RJ-45 LAN connector. Table 3 describes the LED states when the  
board is powered up and the LAN subsystem is operating.  
Table 3.  
RJ-45 LAN Connector LEDs  
LED Color  
LED State  
Indicates  
Green  
Off  
10 Mbit/sec data rate is selected.  
100 Mbit/sec data rate is selected.  
LAN link is not established.  
LAN link is established.  
On  
Yellow  
Off  
On (steady state)  
On (brighter and pulsing)  
The computer is communicating with another computer on  
the LAN.  
Speaker  
A 47 inductive speaker is mounted on the desktop board. The speaker provides audible error  
code (beep code) information during the Power-On Self-Test (POST).  
Battery  
A battery on the board keeps the values in CMOS RAM and the clock current when the computer  
is turned off. See Chapter 2 starting on page 21 for instructions on how to replace the battery.  
Power Management Features  
Power management is implemented at several levels, including:  
Software support:  
Advanced Configuration and Power Interface (ACPI)  
Instantly Available PC (IAPC)  
Hardware support:  
Resume on Ring  
Instantly Available technology  
Wake from USB  
Wake from PS/2 keyboard  
PCI card wake up support  
17  
Intel Desktop Boards D845HV and D845WN Product Guide  
Resume on Ring  
The operation of Resume on Ring can be summarized as follows:  
Resumes operation from the ACPI S1 state  
Requires only one call to access the computer  
Detects incoming call similarly for external and internal modems  
Requires modem interrupt be unmasked for correct operation  
Instantly Available Technology  
CAUTION  
For Instantly Available technology, the 5 V standby line for the power supply must be capable of  
delivering adequate +5 V standby current. Failure to provide adequate standby current when  
using this feature can damage the power supply and/or effect ACPI S3 sleep state functionality.  
Instantly Available technology enables the board to enter the ACPI S3 (Suspend-to-RAM) sleep  
state. While in the S3 sleep state, the computer will appear to be off. When signaled by a wake-up  
device or event, the system quickly returns to its last known awake state.  
The boards standby power indicator, shown in Figure 3, is lit when there is standby power to the  
system. This includes the memory modules and PCI bus connectors, even when the computer  
appears to be off.  
If the system has a dual-colored power LED on the front panel, the sleep state is indicated by the  
LED turning amber.  
CR3H1  
OM11979  
Figure 3. Location of Standby Power Indicator  
18  
Desktop Board Features  
CAUTION  
If the standby current necessary to support multiple wake events from the PCI and/or USB buses  
exceeds power supply capacity, the desktop board may lose register settings stored in memory.  
Power supplies used with this board must be able to provide enough standby current to support the  
standard Instantly Available (ACPI S3 sleep state) configuration as outlined in Table 4. Values are  
determined by specifications such as PCI 2.2. Actual measurements may vary.  
To estimate the total amount of standby current required for a particular system configuration,  
standby current requirements of all installed components must be added. Refer to the descriptions  
in and follow the steps outlined below:  
1. Note the total D845HV or D845WN board standby current requirement.  
2. Add to that the total PS/2 port standby current requirement if a wake-enabled device is  
connected.  
3. Add, from the PCI 2.2 slots (wake-enabled) row, the total of the number of wake-enabled  
devices installed (PCI and AGP) multiplied by the standby current requirement.  
4. Add, from the PCI 2.2 slots (nonwake-enabled) row, the total of the number of wake-enabled  
devices installed (PCI and AGP) multiplied by the standby current requirement.  
5. Add all additional wake-enabled devicesand nonwake-enabled devicesstandby current  
requirements as applicable.  
6. Add all the required current totals from steps 1 through 5 to determine the total estimated  
standby current power supply requirement.  
Table 4.  
Standby Current Requirements  
Instantly Available Current  
Support  
Standby Current  
Requirements (mA)  
Description  
Estimate for integrated board  
components  
Total for the D845HV/D845WN  
board  
770*  
Estimate for add-on components  
(Add to integrated board  
components shown above)  
PS/2 ports**  
345  
375  
100  
875  
40  
PCI 2.2 slots (wake-enabled)  
PCI 2.2 slots (nonwake-enabled)  
CNR** (wake enabled)  
CNR** (non-wake enabled)  
USB ports**  
700  
*
Refer to the Intel Desktop Board D845HV/D845WN Technical Product Specification for the exact standby current  
requirements  
** Dependent upon system configuration  
19  
Intel Desktop Boards D845HV and D845WN Product Guide  
NOTE  
PCI requirements are calculated by totaling the following:  
One wake-enabled device @ 375 mA.  
Five non wake-enabled devices @ 20 mA each.  
PS/2 Ports requirements per the IBM PS/2 Port Specification (Sept 1991):  
Keyboard @ 275 mA.  
Mouse @ 70 mA.  
USB requirements are calculated by totaling the following:  
One wake-enabled device @ 500 mA.  
USB hub @ 100 mA.  
Three USB non-wake-enabled devices @ 2.5 mA each.  
The USB ports are limited to a combined total of 700 mA.  
20  
2 Installing and Replacing Desktop Board  
Components  
This chapter tells you how to:  
Install the I/O shield  
Install and remove the desktop board  
Install and remove a processor  
Install and remove memory  
Install and remove an AGP retention mechanism and card  
Connect the IDE cable  
Set the BIOS jumper  
Clear passwords  
Replace the battery  
Before You Begin  
CAUTION  
Before you install this board in a chassis, see Appendix B for regulatory requirements and  
precautions.  
Always follow the steps in each procedure in the correct order.  
Set up a log to record information about your computer, such as model, serial numbers,  
installed options, and configuration information.  
Electrostatic discharge (ESD) can damage components. Perform the procedures described in  
this chapter only at an ESD workstation using an antistatic wrist strap and a conductive foam  
pad. If such a station is not available, you can provide some ESD protection by wearing an  
antistatic wrist strap and attaching it to a metal part of the computer chassis.  
WARNINGS  
The procedures in this chapter assume familiarity with the general terminology associated with  
personal computers and with the safety practices and regulatory compliance required for using  
and modifying electronic equipment.  
Disconnect the computer from its power source and from any telecommunications links,  
networks, or modems before performing any of the procedures described in this chapter.  
Failure to disconnect power, telecommunications links, networks, or modems before you open  
the computer or perform any procedures can result in personal injury or equipment damage.  
Some circuitry on the board can continue to operate even though the front panel power  
button is off.  
21  
Intel Desktop Boards D845HV and D845WN Product Guide  
Installing the I/O Shield  
The board comes with an I/O shield. When installed in the chassis, the shield blocks radio  
frequency transmissions, protects internal components from dust and foreign objects, and promotes  
correct airflow within the chassis.  
Install the I/O shield before installing the board in the chassis. Place the shield inside the chassis  
as shown in Figure 4. Press the shield into place so that it fits tightly and securely. If the shield  
doesnt fit, obtain a properly-sized shield from the chassis supplier.  
OM11543  
Figure 4. Installing the I/O Shield  
22  
Installing and Replacing Desktop Board Components  
Installing and Removing the Desktop Board  
Refer to your chassis manual for instructions on installing and removing the board. The D845HV  
board is secured to the chassis by eight screws and the D845WN board by 11 screws. See Figure 5  
and Figure 6 for the locations of the mounting holes of each board.  
WARNING  
This procedure should be done only by qualified technical personnel. Disconnect the computer  
from its power source before performing the procedures described here. Failure to disconnect  
the power before you open the computer can result in personal injury or equipment damage.  
NOTES  
You will need a Phillips(#2 bit) screwdriver.  
Refer to Appendix B for regulatory requirements and installation instructions and precautions.  
Figure 5 shows the location of the mounting holes for the D845HV board.  
OM11982  
Figure 5. D845HV Board Mounting Holes  
23  
Intel Desktop Boards D845HV and D845WN Product Guide  
Figure 6 shows the location of the mounting holes for the D850WN board.  
OM12080  
Figure 6. D845WN Board Mounting Holes  
24  
Installing and Replacing Desktop Board Components  
Installing and Removing a Processor  
Instructions on how to install the processor fan heatsink retention mechanism (RM) base and  
processor to the desktop board are given below. For instruction on how to install the processor fan  
heatsink, refer to the processor installation manual or the Intel World Wide Web site:  
Installing the Processor Fan Heatsink Retention Mechanism Base  
NOTE  
The following assembly operation should be performed after the desktop board is secured in the  
chassis.  
To install the processor fan heatsink RM base, follow these instructions:  
1. Observe the precautions in Before You Beginon page 21.  
2. Locate the processor fan heatsink RM holes on the desktop board (see Figure 7).  
OM11983  
Figure 7. Processor Fan Heatsink RM Mounting Holes  
25  
Intel Desktop Boards D845HV and D845WN Product Guide  
3. Align the four fasteners (B) of the processor fan heatsink RM base with the corresponding  
holes in the desktop board (C). Gently press the base down until all four corners snap into  
place. Verify that all four fasteners are fully engaged, then press down each of the four  
locking pushpins (A) to fully secure the base to the desktop board (see Figure 8).  
A
B
C
OM12096  
Figure 8. Installing the Processor Fan Heatsink RM Base to the Board  
26  
Installing and Replacing Desktop Board Components  
Installing a Processor  
CAUTION  
Before installing or removing the processor, make sure that ac power has been removed by  
unplugging the power cord from the computer; the standby power LED should not be lit (see  
Figure 3 on page 18). Failure to do so could damage the processor and the board.  
To install a processor, follow these instructions:  
1. Observe the precautions in Before You Beginon page 21.  
2. Locate the processor socket and raise the socket lever completely.  
3. Install the processor so that the corner with the triangle marking (A) is aligned with the corner  
where the lever is attached to the socket (see Figure 9).  
4. Lower the lever to its original position.  
mPGA478B  
A478B  
mPGA478B  
A
OM12078  
Figure 9. Installing a Processor  
Installing the Processor Fan Heatsink  
For instructions on how to install the processor fan heatsink, refer to the boxed processor manual  
or the Intel World Wide Web site at:  
27  
Intel Desktop Boards D845HV and D845WN Product Guide  
Connecting the Processor Fan Heatsink Cable  
Connect the processor fan heatsink cable to the processor fan connector (see Figure 10).  
OM12083  
Figure 10. Connecting the Processor Fan Heatsink Cable to the Processor Fan Connector  
Removing a Processor  
For instruction on how to remove the processor fan heatsink, refer to the processor installation  
manual or the Intel World Wide Web site at:  
NOTE  
Once removed, the processor fan heatsink base push pins cannot be reused.  
28  
Installing and Replacing Desktop Board Components  
Installing and Removing Memory  
CAUTION  
To be fully compliant with all applicable Intel® SDRAM memory specifications, the boards require  
DIMMs that support the Serial Presence Detect (SPD) data structure.  
You can access the PC Serial Presence Detect Specification at:  
The boards have three 168-pin DIMM sockets arranged as banks 0, 1, and 2 as shown in Figure 11.  
DIMM Installation Guidelines  
All memory components and DIMMs used with the boards must comply with the PC SDRAM  
specifications. These include the following:  
PC133 SDRAM Specification (memory component specific)  
PC Unbuffered DIMM Specification  
You can access these documents through the Internet at:  
Installing DIMMs  
CAUTION  
Install memory in the DIMM sockets prior to installing the AGP video card to avoid interference  
with the memory retention mechanism.  
To install DIMMs, follow these steps:  
1. Observe the precautions in Before You Beginon page 21.  
2. Turn off all peripheral devices connected to the computer. Turn off the computer and  
disconnect the ac power cord.  
3. Remove the computers cover and locate the DIMM sockets (see Figure 11).  
4. Remove the AGP video card (if it interferes with the DIMM clips from being easily opened  
and closed).  
29  
Intel Desktop Boards D845HV and D845WN Product Guide  
0
1
2
OM11986  
Figure 11. Installing a Memory Module  
5. Make sure the clips at either end of the DIMM socket(s) are pushed outward to the  
open position.  
6. Holding the DIMM by the edges, remove it from its anti-static package.  
7. Position the DIMM above the socket. Align the two small notches in the bottom edge of the  
DIMM with the keys in the socket (see inset in Figure 11).  
8. Insert the bottom edge of the DIMM into the socket.  
9. When the DIMM is inserted, push down on the top edge of the DIMM until the retaining clips  
snap into place. Make sure the clips are firmly in place.  
10. Reinstall the AGP card if it was removed prior to installing the DIMMs.  
11. Replace the computers cover and reconnect the ac power cord.  
30  
Installing and Replacing Desktop Board Components  
Removing DIMMs  
To remove a memory module, follow these steps:  
1. Observe the precautions in "Before You Begin" on page 21.  
2. Turn off all peripheral devices connected to the computer. Turn off the computer.  
3. Remove the ac power cord from the computer.  
4. Remove the computers cover.  
5. Remove the AGP card (if it interferes with the DIMM clips from being easily opened  
and closed).  
6. Gently spread the retaining clips at each end of the DIMM socket. The DIMM pops out of  
the socket.  
7. Hold the DIMM by the edges, lift it away from the socket, and store it in an  
anti-static package.  
8. Reinstall the AGP card (if you removed it before installing the DIMMs).  
9. Reinstall and reconnect any parts you removed or disconnected to reach the DIMM sockets.  
10. Replace the computers cover and reconnect the ac power cord.  
31  
Intel Desktop Boards D845HV and D845WN Product Guide  
Installing and Removing the AGP Retention Mechanism  
and Card  
The AGP connector supports 1.5 V 4X and 2X AGP cards. Newer cards have a retention notch as  
shown in Figure 12. When using notched cards, install the AGP card retention mechanism (RM)  
before installing a card. The AGP card RM is not used with unnotched cards.  
Pages 2235 describe:  
Installing the AGP card RM  
Installing an AGP card  
Removing an AGP card from the AGP card RM  
Removing the AGP card RM  
Installing the AGP Card Retention Mechanism  
CAUTION  
Install the AGP card RM only when using an AGP card with a retention notch (A) as shown in  
Figure 12. Use of the AGP card RM with an unnotched card may impair video operation. If you  
need to remove the AGP card RM, follow the instructions on page 35.  
NOTE  
All D845HV and D845WN boxed desktop boards may not include an AGP RM. See “Installing an  
AGP Card” on page 34 if your boxed desktop board does not include an AGP RM.  
A
OM10592  
Figure 12. AGP Card with Retention Notch  
32  
Installing and Replacing Desktop Board Components  
The AGP card RM (see Figure 13) encloses the boards AGP connector and stabilizes the AGP  
card. Place the board (component side up) on a flat, supportive surface, preferably on the  
anti-static bag in which the board was shipped. Follow the steps outlined below to attach the  
RM (A) to the AGP connector (B):  
1. Locate the AGP connector (J5E1) on the board as shown below. Note that the boards  
silkscreen (C) indicates the correct final position of the lever (D) on the RM.  
A
D
E
C
B
OM11980  
Figure 13. Installing the AGP Card Retention Mechanism  
2. Position the RM over the AGP connector as shown below.  
OM10111  
3. Push the lever end of the RM in the direction of the arrow until the two rearmost tabs (E)  
spread over the end of the AGP connector.  
OM10180  
4. Push the free end of the RM over the other end of the AGP connector and press down evenly  
on both ends of the RM until all four tabs click underneath the AGP connector. Do not apply  
unnecessary pressure to avoid damaging the board.  
OM10181  
33  
Intel Desktop Boards D845HV and D845WN Product Guide  
Installing an AGP Card  
Follow these instructions to install an AGP card:  
1. Place the AGP card in the AGP connector.  
2. Press down on the card until it is completely seated in the AGP connector and the card  
retention notch snaps into place around the RM pin.  
3. Secure the cards metal bracket to the chassis back panel with a screw.  
Removing the AGP Card from the Retention Mechanism  
Follow these instructions to remove the AGP card from the RM:  
1. Remove the screw (B) that secures the cards metal bracket (A) to the chassis back panel.  
2. Push back on the RM lever (D), as shown in Figure 14, until the retention pin (C) completely  
clears the notch in the card.  
3. Pull the card straight up (E).  
B
E
A
C
D
OM10595  
Figure 14. Removing the AGP Card  
34  
Installing and Replacing Desktop Board Components  
Removing the AGP Card Retention Mechanism  
Follow these instructions to remove the AGP card retention mechanism:  
1. Using diagonal cutters (A), cut the loop (B) joining the two sides of the retention mechanism  
(see Figure 15).  
2. Spread the sides of the retention mechanism (C) and lift the retention mechanism off of the  
AGP connector.  
NOTE  
Once removed using this method, the AGP RM cannot be reused.  
B
c
A
c
OM10593  
Figure 15. Removing the AGP Card Retention Mechanism  
35  
Intel Desktop Boards D845HV and D845WN Product Guide  
Connecting the IDE Cable  
The Intel® boxed desktop board package includes two IDE cables. Both are capable of connecting  
two drives to the desktop board. The 40-contact cable supports the Ultra DMA-33 transfer  
protocol. The 40-contact, 80-conductor cable supports ATA-66 and ATA-100 transfer protocols  
and is backward compatible with drives using slower IDE transfer protocols. Figure 16 shows the  
correct installation of the cable.  
NOTE  
ATA-66/100 compatible cables are backward compatible with drives using slower IDE transfer  
protocols. If an ATA-66/100 disk drive and a disk drive using any other IDE transfer protocol are  
attached to the same cable, the maximum transfer rate between the drives may be reduced to that  
of the slowest drive.  
NOTE  
Do not connect an ATA device as a slave on the same IDE cable as an ATAPI master device. For  
example, do not connect an ATA hard drive as a slave to an ATAPI CD-ROM drive.  
For correct function of the cable:  
Attach the cable end with the single connector to the board.  
Attach the cable end with the two closely spaced connectors to the drives.  
A
B
OM11988  
Figure 16. Connecting the IDE Cable  
36  
Installing and Replacing Desktop Board Components  
Setting the BIOS Configuration Jumper Block  
CAUTION  
Always turn off the power and unplug the power cord from the computer before changing the  
jumper. Moving the jumper with the power on may result in unreliable computer operation.  
The location of the boards BIOS configuration jumper is shown in Figure 17.  
1
3
J9G1  
OM11996  
Figure 17. Location of the BIOS Configuration Jumper Block  
The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup.  
Table 5 shows the jumper settings for the Setup program modes.  
Table 5.  
Jumper Settings for the BIOS Setup Program Modes (J9G1)  
Function / Mode  
Jumper Setting  
Configuration  
Normal  
1-2  
The BIOS uses current configuration information and passwords  
for booting.  
1
3
1
3
1
3
Configure  
Recovery  
2-3  
After the POST runs, the BIOS displays the maintenance menu.  
Use this menu to clear passwords.  
None  
The BIOS attempts to recover the BIOS configuration. A  
recovery diskette is required.  
37  
Intel Desktop Boards D845HV and D845WN Product Guide  
Clearing Passwords  
This procedure assumes that the board is installed in the computer and the configuration jumper  
block is set to normal mode.  
1. Observe the precautions in Before You Beginon page 21.  
2. Turn off all peripheral devices connected to the computer. Turn off the computer. Disconnect  
the computers power cord from the ac power source (wall outlet or power adapter).  
3. Remove the computer cover.  
4. Find the configuration jumper block (see Figure 17).  
5. Place the jumper on pins 2-3 as shown below.  
1
3
6. Replace the cover, plug in the computer, turn on the computer, and allow it to boot.  
7. The computer starts the Setup program. Setup displays the maintenance menu.  
8. Use the arrow keys to select Clear Passwords. Press <Enter> and Setup displays a pop-up  
screen requesting that you confirm clearing the password. Select Yes and press <Enter>.  
Setup displays the maintenance menu again.  
9. Press <F10> to save the current values and exit Setup.  
10. Turn off the computer. Disconnect the computers power cord from the ac power source.  
11. Remove the computer cover.  
12. To restore normal operation, place the jumper on pins 1-2 as shown below.  
1
3
13. Replace the cover, plug in the computer, and turn on the computer.  
38  
Installing and Replacing Desktop Board Components  
Replacing the Battery  
A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer  
is not plugged into a wall socket, the battery has an estimated life of three years. When the  
computer is plugged in, the standby current from the power supply extends the life of the battery.  
The clock is accurate to ± 13 minutes/year at 25 ºC with 3.3 VSB applied.  
When the voltage drops below a certain level, the BIOS Setup program settings stored in CMOS  
RAM (for example, the date and time) might not be accurate. Replace the battery with an  
equivalent one. Figure 18 on page 41 shows the location of the battery.  
CAUTION  
Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled  
where possible. Disposal of used batteries must be in accordance with local environmental  
regulations.  
PRECAUTION  
Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect. Les piles  
usagées doivent être recyclées dans la mesure du possible. La mise au rebut des piles usagées doit  
respecter les réglementations locales en vigueur en matière de protection de l'environnement.  
(French)  
FORHOLDSREGEL  
Eksplosionsfare, hvis batteriet erstattes med et batteri af en forkert type. Batterier bør om muligt  
genbruges. Bortskaffelse af brugte batterier bør foregå i overensstemmelse med gældende  
miljølovgivning.  
(Danish)  
OBS!  
Det kan oppstå eksplosjonsfare hvis batteriet skiftes ut med feil type. Brukte batterier bør kastes i  
henhold til gjeldende miljølovgivning.  
(Norwegian)  
VIKTIGT!  
Risk för explosion om batteriet ersätts med felaktig batterityp. Batterier ska kasseras enligt de  
lokala miljövårdsbestämmelserna.  
(Swedish)  
VARO  
Räjähdysvaara, jos pariston tyyppi on väärä. Paristot on kierrätettävä, jos se on mahdollista.  
Käytetyt paristot on hävitettävä paikallisten ympäristömääräysten mukaisesti.  
(Finnish)  
39  
Intel Desktop Boards D845HV and D845WN Product Guide  
VORSICHT  
Bei falschem Einsetzen einer neuen Batterie besteht Explosionsgefahr. Die Batterie darf nur durch  
denselben oder einen entsprechenden, vom Hersteller empfohlenen Batterietyp ersetzt werden.  
Entsorgen Sie verbrauchte Batterien den Anweisungen des Herstellers entsprechend.  
(German)  
AVVERTIMENTO  
Esiste il pericolo di un esplosione se la pila non viene sostituita in modo corretto. Utilizzare solo  
pile uguali o di tipo equivalente a quelle consigliate dal produttore. Per disfarsi delle pile usate,  
seguire le istruzioni del produttore.  
(Italian)  
PRECAUCIÓN  
Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas  
iguales o del mismo tipo que las recomendadas por el fabricante del equipo. Para deshacerse de  
las pilas usadas, siga igualmente las instrucciones del fabricante.  
(Spanish)  
WAARSCHUWING  
Er bestaat ontploffingsgevaar als de batterij wordt vervangen door een onjuist type batterij.  
Batterijen moeten zoveel mogelijk worden gerecycled. Houd u bij het weggooien van gebruikte  
batterijen aan de plaatselijke milieuwetgeving.  
(Dutch)  
ATENÇÃO  
Haverá risco de explosão se a bateria for substituída por um tipo de bateria incorreto. As baterias  
devem ser recicladas nos locais apropriados. A eliminação de baterias usadas deve ser feita de  
acordo com as regulamentações ambientais da região.  
(Brazilian Portuguese)  
40  
Installing and Replacing Desktop Board Components  
To replace the battery, follow these steps:  
1. Observe the precautions in Before You Begin(see page 21).  
2. Turn off all peripheral devices connected to the computer. Disconnect the computers power  
cord from the ac power source (wall outlet or power adapter).  
3. Remove the computer cover.  
4. Locate the battery on the board (see Figure 18).  
5. With a medium flat-bladed screwdriver, gently pry the battery free from its connector. Note  
the orientation of the +and -on the battery.  
6. Install the new battery in the connector, orienting the +and -correctly.  
7. Replace the computer cover.  
OM11987  
Figure 18. Removing the Battery  
41  
Intel Desktop Boards D845HV and D845WN Product Guide  
42  
3 Updating the BIOS  
This chapter tells you how to update the BIOS by either using the Intel® Express BIOS Update  
utility or the Intel® Flash Memory Update Utility, and how to recover the BIOS if an update fails.  
®
Updating the BIOS with the Intel Express BIOS Update  
Utility  
With the Intel Express BIOS Update utility you can update the system BIOS while in the Windows  
environment. The BIOS file is included in an automated update utility which combines the  
functionality of the Intel Flash Memory Update Utility and the ease-of use of Windows-based  
installation wizards.  
To update the BIOS with the Intel Express BIOS Update utility:  
1. Go to the Intel World Wide Web site:  
2. Navigate to the D845HV or D845WN page and click the Express BIOS Update utility file for  
the D845HV or D845WN boards BIOS.  
3. Download the file to your hard drive. (You can also save this file to a diskette. This is useful  
if you are updating the BIOS for multiple identical systems.)  
4. Close all other applications. This step is required. Your system will be rebooted at the last  
Express BIOS Update window.  
5. Double-click the executable file from the location on your hard drive where it was saved. This  
runs the update program.  
6. Follow the instructions provided in the dialog boxes to complete the BIOS update.  
43  
Intel Desktop Boards D845HV and D845WN Product Guide  
®
Updating the BIOS with the Intel Flash Memory Update  
Utility  
With the Intel Flash Memory Update Utility you can update the system BIOS from a floppy disk or  
other bootable media. The utility available from the Web provides a simple method for creating a  
bootable flash memory update floppy that will automatically update your BIOS.  
Obtaining the BIOS Update File  
You can update to a new version of the BIOS by using the BIOS update file. The BIOS update file  
is a compressed self-extracting archive that contains all the files you need to update the BIOS. The  
BIOS update file contains:  
New BIOS files  
BIOS recovery files  
Intel Flash Memory Update Utility  
You can obtain the BIOS update file through your computer supplier or by navigating to the  
D845HV or D845WN page on the Intel World Wide Web site:  
NOTE  
Please review the instructions distributed with the update utility before attempting a BIOS update.  
The Intel Flash Memory Update Utility allows you to:  
Update the BIOS in flash memory  
Update the language section of the BIOS  
Updating the BIOS  
CAUTION  
The AUTOEXEC.BAT file provided with the update files updates the BIOS. Do not interrupt the  
process or the system may not function.  
1. Boot the computer with the BIOS update diskette in drive A. During system boot, the  
AUTOEXEC.BAT file provided with the update files will automatically run the BIOS update  
process.  
2. When the update process is complete, the monitor will display a message telling you to remove  
the diskette and to reboot the system.  
3. As the computer boots, check the BIOS identifier (version number) to make sure the update  
was successful. If a logo appears, press <Esc> to view the POST messages.  
44  
Updating the BIOS  
Recovering the BIOS  
It is unlikely that anything will interrupt the BIOS update; however, if an interruption occurs, the  
BIOS could be damaged. The following steps explain how to recover the BIOS if an update fails.  
The following procedure uses recovery mode for the Setup program. See page 37 for more  
information on Setup modes.  
NOTE  
Because of the small amount of code available in the boot block area, there is no video support.  
You will not see anything on the screen during this procedure. Monitor the procedure by listening  
to the speaker and looking at the diskette drive LED.  
1. Turn off the computer, disconnect the computers power cord, and disconnect all external  
peripherals.  
2. Remove the computer cover and locate the configuration jumper block (J9G1) (see Figure 17).  
3. Remove the jumper from all pins as shown below to set recovery mode for Setup.  
1
3
4. Insert the bootable BIOS update diskette into diskette drive A.  
5. Replace the computer cover, connect the power cord, turn on the computer, and allow it to  
boot. The recovery process will take a few minutes.  
6. Listen to the speaker:  
Upon applying power, drive A will begin to show activity. In about a minute, two beeps  
are heard and drive A activity ceases (temporarily) indicating the successful recovery of  
the BIOS core. Drive A activity will begin again followed by two more beeps indicating  
the successful recovery of the boot block. This sequence of events indicates a successful  
BIOS recovery.  
A series of continuous beeps indicates a failed BIOS recovery.  
7. If recovery fails, return to step 1 and repeat the recovery process.  
8. If recovery is successful, turn off the computer, and disconnect its power cord.  
9. Remove the computer cover and continue with the following steps.  
10. On the jumper block (J9G1), reinstall the jumper back on pins 1-2 as shown below to set  
normal mode for Setup.  
1
3
11. Leave the update diskette in drive A, replace the computer cover, and connect the computers  
power cord.  
12. Turn on the computer and continue with the BIOS update (see page 44).  
45  
Intel Desktop Boards D845HV and D845WN Product Guide  
46  
4 Using the Setup Program  
The BIOS Setup program can be used to view and change the BIOS settings for the computer. The  
BIOS Setup program is accessed by pressing the <F2> key after the Power-On Self-Test (POST)  
memory test begins and before the operating system boot begins.  
NOTE  
The BIOS Setup menus described in this section may not show the latest settings. For the latest  
BIOS settings, refer to the Intel Desktop Board D845HV/D845WN Technical Product  
Specification or the Intel World Wide Web site:  
NOTE  
For reference purposes, you should write down the current Setup settings. When you make  
changes to the settings, update this record.  
NOTE  
The Setup menus described in this section apply to the desktop boards with BIOS identifier  
HV84510A.86A. Boards with other BIOS identifiers might have differences in some of the  
Setup menu screens.  
The Setup screen menu bar is shown below.  
Maintenance Main  
Advanced Security Power  
Boot  
Exit  
Table 6 shows the BIOS Setup program menu bar.  
Table 6.  
Maintenance  
Clears passwords Allocates  
BIOS Setup Program Menu Bar  
Main  
Advanced  
Security  
Power  
Boot  
Exit  
Configures  
Sets  
passwords  
Configures  
power  
Selects boot Saves or  
options and discards  
and Boot Integrity resources for advanced  
Service (BIS)*  
credentials, and  
configures  
hardware  
components  
features  
available  
through the  
chipset  
and security management power  
changes to  
set program  
options  
features  
features  
supply  
controls  
extended  
configuration  
memory settings  
* For information about the BIS, refer to the Intel Web site at:  
47  
Intel Desktop Boards D845HV and D845WN Product Guide  
Table 7 shows the function keys available for menu screens.  
Table 7.  
BIOS Setup Program Function Keys  
BIOS Setup Program Function Key Description  
<> or <>  
<> or <>  
<Tab>  
Selects a different menu screen  
Moves cursor up or down  
Moves cursor to the next field  
<Enter>  
<F9>  
Executes command or selects the submenu  
Load the default configuration values for the current menu  
Save the current values and exits the BIOS Setup program  
Exits the menu  
<F10>  
<Esc>  
Maintenance Menu  
Main  
Advanced Security  
Power  
Boot  
Exit  
Maintenance  
The menu shown in Table 8 is used to clear the Setup passwords and enable extended  
configuration mode. Setup only displays this menu in configure mode. See page 37 for  
information about setting configure mode.  
Table 8.  
Feature  
Maintenance Menu  
Options  
Description  
Clear All Passwords  
Yes (default)  
Clears the user and administrative passwords.  
No  
Clear BIS Credentials Yes (default)  
Clears the Wired for Management Boot Integrity Service (BIS)  
credentials.  
No  
Extended  
Configuration  
No options  
No options  
No options  
Invokes the Extended Configuration submenu.  
Displays CPUs Microcode Update Revision.  
Displays CPUs Stepping Signature.  
CPU Microcode  
Update Revision  
CPU Stepping  
Signature  
* For information about the BIS, refer to the Intel Web site at:  
48  
Using the Setup Program  
Extended Configuration Submenu  
Main  
Advanced Security  
Power  
Boot  
Exit  
Maintenance  
Extended Configuration  
This submenu shown in Table 9 is used to set system control and video memory cache mode. This  
submenu becomes available when User Defined is selected under Extended Configuration.  
Table 9.  
Feature  
Extended Configuration Submenu  
Options  
Description  
Extended Configuration  
Default (default) User Defined allows setting memory control and video  
memory cache mode. If selected here, will also display  
User-Defined  
in the Advanced Menu as: Extended Menu: Used.”  
Video Memory Cache Mode USWC  
Selects Uncacheable Speculative Write-Combining  
(USWC) video memory cache mode. Full 32 byte  
contents of the Write Combining buffer are written to  
memory as required. Cache lookups are not  
performed. Both the video driver and the application  
must support Write Combining.  
UC (default)  
Selects UnCacheable (UC) video memory cache mode.  
This setting identifies the video memory range as  
uncacheable by the processor. Memory writes are  
performed in program order. Cache lookups are not  
performed. Well suited for applications not supporting  
Write Combining.  
SDRAM Auto-Configuration Auto (default)  
Sets extended memory configuration options to Auto or  
User Defined.  
User Defined  
CAS# Latency  
3  
2  
Selects the number of clock cycles required to address  
a column in memory.  
Auto (default)  
SDRAM RAS# to CAS#  
Delay  
3  
2  
Selects the number of clock cycles between addressing  
a row and addressing a column.  
Auto (default)  
3  
2  
SDRAM RAS# Precharge  
Selects the length of time required before accessing a  
new row.  
Auto (default)  
49  
Intel Desktop Boards D845HV and D845WN Product Guide  
Main Menu  
Maintenance  
Advanced Security  
Power  
Boot  
Exit  
Main  
Table 10 describes the Main Menu. This menu reports processor and memory information and is  
used to configure the system date and system time.  
Table 10. Main Menu  
Feature  
Options  
Description  
BIOS Version  
Processor Type  
Processor Speed  
No options  
No options  
No options  
Displays the version of the BIOS.  
Displays processor type.  
Displays processor speed.  
Displays the system bus frequency.  
System Bus Frequency No options  
Cache RAM  
No options  
Displays the size of second-level cache and whether it is  
ECC-capable.  
Total Memory  
Memory Bank 0  
Memory Bank 1  
Memory Bank 2  
Language  
No options  
No options  
Displays the total amount of RAM.  
Displays the amount and type of RAM in the  
memory banks.  
English (default) Selects the current default language used by the BIOS.  
Espanol  
Processor Serial  
Number  
Disabled (default) Enables and disables the processor serial number.  
Enabled  
System Time  
System Date  
Hour, minute, and  
second  
Specifies the current time.  
Specifies the current date.  
Day of week  
Month/day/year  
50  
Using the Setup Program  
Advanced Menu  
Maintenance  
Main  
Security  
Power  
Boot  
Exit  
Advanced  
PCI Configuration  
Boot Configuration  
Peripheral Configuration  
IDE Configuration  
Diskette Configuration  
Event Log Configuration  
Video Configuration  
Table 11 describes the Advanced Menu. This menu is used to set advanced features that are  
available through the chipset.  
Table 11. Advanced Menu  
Feature  
Options  
Description  
Extended Configuration  
No options  
If Used is displayed, User-Defined has been selected in  
Extended Configuration under the Maintenance Menu.  
PCI Configuration  
Boot Configuration  
No options  
No options  
Configures individual PCI slots IRQ priority. When selected,  
displays the PCI Configuration submenu.  
Configures Plug and Play and the Numlock key, and resets  
configuration data. When selected, displays the Boot  
Configuration submenu.  
Peripheral Configuration  
No options  
Configures peripheral ports and devices. When selected,  
displays the Peripheral Configuration submenu.  
IDE Configuration  
No options  
No options  
Specifies type of connected IDE device.  
Diskette Configuration  
When selected, displays the Diskette Configuration  
submenu.  
Event Log Configuration  
Video Configuration  
No options  
No options  
Configures Event Logging. When selected, displays the  
Event Log Configuration submenu.  
Configures video features. When selected, displays the  
Video Configuration submenu.  
51  
Intel Desktop Boards D845HV and D845WN Product Guide  
PCI Configuration Submenu  
Maintenance  
Main  
Security  
Power  
Boot  
Exit  
Advanced  
PCI Configuration  
Boot Configuration  
Peripheral Configuration  
IDE Configuration  
Diskette Configuration  
Event Log Configuration  
Video Configuration  
The submenu shown in Table 12 is used to configure the IRQ priority of PCI slots individually.  
Table 12. PCI Configuration Submenu  
Feature  
Options  
Auto (default)  
9  
Description  
PCI Slot 1 IRQ Priority  
Allows selection of IRQ priority. IRQ Priority selections for  
PCI slots 1 and 5 are linked. Selections made to PCI  
Slot 1 IRQ Priority are repeated in PCI Slot 5 IRQ Priority.  
10  
11  
PCI Slot 2 IRQ Priority  
PCI Slot 3 IRQ Priority  
Auto (default)  
9  
10  
Allows selection of IRQ priority and S5 wake.  
Allows selection of IRQ priority.  
Allows selection of IRQ priority.  
Allows selection of IRQ priority.  
Always set to Auto.  
11  
Auto (default)  
9  
10  
11  
PCI Slot 4 IRQ Priority  
(Note)  
Auto (default)  
9  
10  
11  
PCI Slot 5 IRQ Priority  
(Note)  
Auto (default)  
9  
10  
11  
PCI Slot 6 IRQ Priority  
(Note)  
No options  
Note: PCI slots 4, 5, and 6 are available only on the D845WN board.  
52  
Using the Setup Program  
Boot Configuration Submenu  
Maintenance  
Main  
Security  
Power  
Boot  
Exit  
Advanced  
PCI Configuration  
Boot Configuration  
Peripheral Configuration  
IDE Configuration  
Diskette Configuration  
Event Log Configuration  
Video Configuration  
The submenu shown in Table 13 is used to set the Plug & Play options, reset configuration data,  
and the power-on state of the Numlock key.  
Table 13. Boot Configuration Submenu  
Feature  
Options  
Description  
Plug & Play O/S  
No (default)  
Yes  
Specifies if manual configuration is desired.  
No lets the BIOS configure all devices. This setting is  
appropriate when using a Plug and Play operating system.  
Yes lets the operating system configure Plug and Play devices  
not required to boot the system. This option is available for use  
during lab testing.  
Reset Config Data  
Numlock  
No (default)  
Yes  
No does not clear the PCI/PnP configuration data stored in  
flash memory on the next boot.  
Yes clears the PCI/PnP configuration data stored in flash  
memory on the next boot.  
Off  
On (default)  
Specifies the power-on state of the Numlock feature on the  
numeric keypad of the keyboard.  
53  
Intel Desktop Boards D845HV and D845WN Product Guide  
Peripheral Configuration Submenu  
Maintenance  
Main  
Security  
Power  
Boot  
Exit  
Advanced  
PCI Configuration  
Boot Configuration  
Peripheral Configuration  
IDE Configuration  
Diskette Configuration  
Event Log Configuration  
Video Configuration  
This submenu shown in Table 14 is used for configuring computer peripherals.  
Table 14. Peripheral Configuration Submenu  
Feature  
Options  
Description  
Serial Port A  
Disabled  
Enabled  
Auto (default)  
Configures serial port A.  
Auto assigns the first free COM port, normally COM1, the  
address 3F8h, and the interrupt IRQ4.  
An * (asterisk) displayed next to an address indicates a  
conflict with another device.  
Base I/O Address  
3F8 (default)  
2F8  
3E8  
Specifies the base I/O address for serial port A, if serial port  
A is Enabled.  
(This feature is present  
only when Serial Port A  
is set to Enabled)  
2E8  
Interrupt  
IRQ 3  
IRQ 4 (default)  
Specifies the interrupt for serial port A, if serial port A is  
Enabled.  
(This feature is present  
only when Serial Port A  
is set to Enabled)  
Serial Port B  
Disabled  
Configures serial port B.  
Enabled  
Auto (default)  
Auto assigns the first free COM port, normally COM2, the  
address 2F8h, and the interrupt IRQ3.  
An * (asterisk) displayed next to an address indicates a  
conflict with another device.  
Base I/O Address  
2F8 (default)  
3E8  
2E8  
Specifies the base I/O address for serial port B.  
(This feature is present  
only when Serial Port B  
is set to Enabled)  
Interrupt  
IRQ 3 (default) Specifies the interrupt for serial port B.  
IRQ 4  
(This feature is present  
only when Serial Port B  
is set to Enabled)  
continued  
54  
Using the Setup Program  
Table 14. Peripheral Configuration Submenu (continued)  
Feature  
Options  
Description  
Parallel Port  
Disabled  
Enabled  
Auto (default)  
Configures the parallel port.  
Auto assigns LPT1 the address 378h and the  
interrupt IRQ7.  
An * (asterisk) displayed next to an address indicates a  
conflict with another device.  
Mode  
Output Only  
Selects the mode for the parallel port. Not available if the  
parallel port is disabled.  
Output Only operates in AT-compatible mode.  
Bi-directional  
(default)  
EPP  
Bi-directional operates in PS/2-compatible mode.  
ECP  
EPP is Extended Parallel Port mode, a high-speed  
bi-directional mode.  
ECP is Enhanced Capabilities Port mode, a high-speed  
bi-directional mode.  
Base I/O Address  
378 (default)  
278  
228  
Specifies the base I/O address for the parallel port.  
Specifies the interrupt for the parallel port.  
Specifies the DMA channel.  
(This feature is present  
only when Parallel Port  
is set to Enabled)  
Interrupt  
IRQ 5  
IRQ 7 (default)  
(This feature is present  
only when Parallel Port  
is set to Enabled)  
DMA Channel  
1  
(This feature is present  
only when Parallel Port  
Mode is set to ECP)  
3 (default)  
Audio Device  
Disabled  
Enabled (default)  
Disabled  
Enables or disables the onboard audio subsystem.  
Enables or disables the LAN device.  
LAN Device  
(This feature is present  
only when there is  
onboard LAN)  
Enabled (default)  
Legacy USB Support  
Disabled  
Enables or disables USB legacy support.  
Enabled (default)  
55  
Intel Desktop Boards D845HV and D845WN Product Guide  
IDE Configuration Submenu  
Maintenance  
Main  
Security  
Power  
Boot  
Exit  
Advanced  
PCI Configuration  
Boot Configuration  
Peripheral Configuration  
IDE Configuration  
Diskette Configuration  
Event Log Configuration  
Video Configuration  
This submenu shown in Table 15 is used to configure IDE device options.  
Table 15. IDE Configuration Submenu  
Feature  
Options  
Description  
IDE Controller  
Disabled  
Primary  
Secondary  
Both (default)  
Specifies the integrated IDE controller.  
Primary enables only the primary IDE controller.  
Secondary enables only the secondary IDE controller.  
Both enables both IDE controllers.  
Hard Disk Pre-Delay Disabled (default) Specifies the hard disk drive pre-delay.  
3 Seconds  
6 Seconds  
9 Seconds  
12 Seconds  
15 Seconds  
21 Seconds  
30 Seconds  
Primary IDE Master  
Primary IDE Slave  
No options  
No options  
No options  
Reports type of connected IDE device. When selected,  
displays the Primary IDE Master submenu.  
Reports type of connected IDE device. When selected,  
displays the Primary IDE Slave submenu.  
Secondary IDE  
Master  
Reports type of connected IDE device. When selected,  
displays the Secondary IDE Master submenu.  
Secondary IDE Slave No options  
Reports type of connected IDE device. When selected,  
displays the Secondary IDE Slave submenu.  
56  
Using the Setup Program  
Primary/Secondary IDE Master/Slave Submenus  
Maintenance  
Main  
Security  
Power  
Boot  
Exit  
Advanced  
Boot Configuration  
Peripheral Configuration  
IDE Configuration  
Primary IDE Master  
Diskette Configuration  
Event Log Configuration  
Primary IDE Slave  
Secondary IDE Master  
Secondary IDE Slave  
Video Configuration  
There are four IDE submenus: Primary master, primary slave, secondary master, and secondary  
slave. Table 16 shows the format of these IDE submenus. For brevity, only one example  
is shown.  
Table 16. Primary/Secondary IDE Master/Slave Submenus  
Feature  
Options  
Description  
Drive Installed  
Type  
None  
Displays the type of drive installed.  
Specifies the IDE configuration mode for IDE devices.  
User allows capabilities to be changed.  
Auto fills-in capabilities from ATA/ATAPI device.  
None  
User  
Auto (default)  
CD-ROM  
ATAPI Removable  
Other ATAPI  
IDE Removable  
None  
Maximum Capacity  
LBA Mode Control  
Displays the capacity of the drive.  
Disabled  
Enabled (default)  
Disabled  
2 Sectors  
4 Sectors  
8 Sectors  
16 Sectors (default)  
Auto (default)  
0  
Enables or disables LBA mode control.  
Multi-Sector Transfers  
Specifies number of sectors per block for transfers from  
the hard disk drive to memory.  
Check the hard disk drives specifications for optimum  
setting.  
PIO Mode  
(Note)  
Specifies the PIO mode.  
1  
2  
3  
4  
Note: These configuration options appear only if an IDE device is installed.  
continued  
57  
Intel Desktop Boards D845HV and D845WN Product Guide  
Table 16. Primary/Secondary IDE Master/Slave Submenus (continued)  
Feature  
Options  
Description  
Ultra DMA  
Disabled (default)  
Mode 0  
Mode 1  
Mode 2  
Mode 3  
Mode 4  
None  
Specifies the Ultra DMA mode for the drive.  
Cable Detected (Note)  
Displays the type of cable connected to the IDE  
interface: 40-conductor or 80-conductor  
(for ATA-66/100 devices).  
Note: These configuration options appear only if an IDE device is installed.  
Diskette Configuration Submenu  
Maintenance  
Main  
Security  
Power  
Boot  
Exit  
Advanced  
PCI Configuration  
Boot Configuration  
Peripheral Configuration  
IDE Configuration  
Diskette Configuration  
Event Log Configuration  
Video Configuration  
This submenu shown in Table 17 is used to configure the diskette drive.  
Table 17. Diskette Configuration Submenu  
Feature  
Options  
Description  
Diskette Controller  
Disabled  
Enabled (default)  
Not Installed  
360 KB  
1.2 MB  
720 KB  
Disables or enables the integrated diskette  
controller.  
Floppy A  
Specifies the capacity and physical size of  
diskette drive A.  
5¼"  
5¼"  
3½"  
1.44/1.25 MB 3½" (default)  
2.88 MB 3½"  
Diskette Write-Protect  
Disabled (default)  
Enabled  
Disables or enables write-protect for the  
diskette drive.  
58  
Using the Setup Program  
Event Log Configuration Submenu  
Maintenance  
Main  
Security  
Power  
Boot  
Exit  
Advanced  
PCI Configuration  
Boot Configuration  
Peripheral Configuration  
IDE Configuration  
Diskette Configuration  
Event Log Configuration  
Video Configuration  
The submenu shown in Table 18 is used to configure the event logging features.  
Table 18. Event Log Configuration Submenu  
Feature  
Options  
Description  
Event Log  
No options  
No options  
[Enter]  
Indicates if there is space available in the event log.  
Indicates if the contents of the event log are valid.  
Displays the event log.  
Event Log Validity  
View Event Log  
Clear All Event Logs  
No (default)  
Yes  
Clears the event log after rebooting.  
Event Logging  
Disabled  
Enabled (default)  
Yes (default)  
No  
Enables logging of events.  
Marks all events as read.  
Mark Events As Read  
59  
Intel Desktop Boards D845HV and D845WN Product Guide  
Video Configuration Submenu  
Maintenance  
Main  
Security  
Power  
Boot  
Exit  
Advanced  
PCI Configuration  
Boot Configuration  
Peripheral Configuration  
IDE Configuration  
Diskette Configuration  
Event Log Configuration  
Video Configuration  
The submenu shown in Table 19 is used to configure video features.  
Table 19. Video Configuration Submenu  
Feature  
Options  
Description  
Primary Video Adapter  
AGP (default)  
PCI  
Selects primary video adapter to be used  
during boot.  
AGP Hardware Detected No Options  
Integrated indicates that the onboard graphics  
subsystem is enabled on the D845HV and D845WN  
boards only.  
2x AGP Card or 4x AGP Card indicates that the  
BIOS has detected a 2x or 4x AGP card. Installing  
an add-in AGP card disables the onboard graphics  
subsystem on the D845HV and D845WN boards.  
60  
Using the Setup Program  
Security Menu  
Maintenance  
Main  
Advanced  
Power  
Boot  
Exit  
Security  
The menu shown in Table 20 is used to set passwords and security features.  
Table 20. Security Menu  
If no password entered previously:  
Feature  
Options  
Description  
Supervisor Password Is  
User Password Is  
Set Supervisor Password  
No options  
No options  
Reports if there is a supervisor password set.  
Reports if there is a user password set.  
Password can be up to seven Specifies the supervisor password.  
alphanumeric characters.  
Set User Password  
Password can be up to seven Specifies the user password.  
alphanumeric characters.  
Clear User Password  
(Note 1)  
Yes (default)  
No  
Clears the user password.  
User Access Level  
Limited  
Sets BIOS Setup Utility access rights for  
user level.  
(Note 2)  
No Access  
View Only  
Full (default)  
Enabled  
Unattended Start  
(Notes 1, 3, and 4)  
Enabled allows system to complete the boot  
process without a password. The keyboard  
remains locked until a password is entered. A  
password is required to boot from a diskette.  
Disabled (default)  
Notes:  
1. This feature appears only if a user password has been set.  
2. This feature appears only if both a user password and a supervisor password have been set.  
3. If both Legacy USB Support (in the Peripheral Configuration submenu) and Unattended Start (in the Security menu)  
are enabled, USB aware operating systems can unlock a PS/2 style keyboard and mouse without requiring the user to  
enter a password.  
4. When Unattended Start is enabled, a USB aware operating system may override user password protection if used in  
conjunction with a USB keyboard and mouse without requiring the user to enter a password.  
61  
Intel Desktop Boards D845HV and D845WN Product Guide  
Power Menu  
Maintenance  
Main  
Advanced Security  
Boot  
Exit  
Power  
The menu shown in Table 21 is used to set power management features.  
Table 21. Power Menu  
Feature  
Options  
Description  
When selected, displays the ACPI submenu.  
ACPI  
No Options  
After Power Failure  
Stays Off  
Last State (default)  
Power On  
Specifies the mode of operation if an ac power loss  
occurs.  
Stays Off keeps the power off until the power button is  
pressed.  
Last State restores the previous power state before  
power loss occurred.  
Power On restores power to the computer.  
Wake on PME  
Stay Off (default)  
Power-On  
Determines how the system responds to a PCI-PME  
wake up event.  
Wake on Modem Ring  
Stay Off (default)  
Power-On  
Specifies how the computer responds to a Modem  
Ring wake up event on an installed modem.  
ACPI Submenu  
Power  
ACPI  
Maintenance  
Main  
Advanced Security  
Boot  
Exit  
The submenu represented in Table 22 is for setting the ACPI features.  
Table 22.  
Feature  
ACPI Submenu  
Options  
Description  
ACPI Suspend State  
S1 State  
Specifies the ACPI sleep state.  
S3 State (default)  
Video Repost  
Disabled (default) Allows the video BIOS to be initialized coming out of the  
(This feature is present  
only when ACPI Suspend  
State is set to S3)  
S3 state. Some video controllers require this option to  
Enabled  
be enabled. This feature is present only if the ACPI  
suspend state is set to S3 state.  
Wake on LAN from S5  
Stay Off (default) In ACPI soft-off mode only, determines how the system  
responds to a LAN wake up event when the system is in  
Power On  
the ACPI soft-off mode.  
62  
Using the Setup Program  
Boot Menu  
Maintenance  
Main  
Advanced Security  
Power  
Exit  
Boot  
The menu shown in Table 24 is used to set the boot features and the boot sequence.  
Table 23. Boot Menu  
Feature  
Options  
Description  
Quiet Boot  
Disabled  
Disabled displays normal POST messages.  
Enabled (default) Enabled displays OEM graphic instead of POST  
messages.  
Intel® Rapid BIOS Boot Disabled  
Enabled (default)  
Enables the computer to boot without running certain  
POST tests.  
Scan User Flash Area  
Disabled (default) Enables the BIOS to scan the flash memory for user binary  
Enabled  
files that are executed at boot time.  
Boot Device Priority  
Hard Disk Drives  
No options  
No options  
No options  
Specifies the boot sequence from the available types of  
boot devices.  
Specifies the boot sequence from the available hard  
disk drives.  
Removable Devices  
Specifies the boot sequence from the available removable  
devices.  
ATAPI CD-ROM Drives No options  
Specifies the boot sequence from the available ATAPI CD-  
ROM drives.  
63  
Intel Desktop Boards D845HV and D845WN Product Guide  
Boot Device Priority Submenu  
Boot  
Maintenance  
Main  
Advanced Security  
Power  
Exit  
Boot Device Priority  
Hard Disk Drives  
Removable Devices  
ATAPI CD-ROM Drives  
The submenu represented in Table 24 is for setting boot devices priority.  
Table 24. Boot Device Priority Submenu  
Feature  
Options  
Description  
1st Boot Device Removable Device Specifies the boot sequence from the available types of boot  
2nd Boot Device Hard Drive  
devices. To specify boot sequence:  
3rd Boot Device ATAPI CD-ROM  
1. Select the boot device with <> or <>.  
2. Press <Enter> to set the selection as the intended boot device.  
4th Boot Device Intel UNDI, PXE  
(Note 1)  
The operating system assigns a drive letter to each boot device in  
Disabled  
the order listed. Changing the order of the devices changes the  
drive lettering. The default settings for the first through final boot  
devices are, respectively listed below. The BIOS supports up to  
sixteen total boot devices in any combination of the boot device  
types below, with respect to these maximums per type.  
Removable Device (maximum of four).  
Hard Drive (maximum of 12).  
ATAPI CD-ROM (maximum of four).  
Intel® UNDI, PXE (maximum of five) (Note 2).  
The boot devices appear in order by type. For example, assume that  
the default boot order is preserved and that seven boot devices of  
the following types are installed on the system: two removable  
devices, two hard drives, two ATAPI CD-ROMs, and an Intel UNDI  
(Universal Network Device Interface), PXE device. Both removable  
devices would appear as the first and second boot devices, the two  
hard drives would appear as the third and fourth, the two ATAPI  
CD-ROM drives would appear as the fifth and sixth, and the Intel  
UNDI, PXE device would appear as the seventh boot device.  
Notes:  
1. After the predefined boot device types (removable devices, hard drives, and ATAPI CD-ROM drives), the entries in this  
list will reflect as many boot entry vector (BEV) boot devices (for example, Intel UNDI, PXE devices) and SCSI  
CD-ROM drives as are installed, up to the five BEV boot devices supported by the BIOS.  
2. While the predefined boot device types are individually listed in submenus by type, the BEV devices and SCSI  
CD-ROM drives are all listed at this level.  
64  
Using the Setup Program  
Hard Disk Drives Submenu  
Boot  
Maintenance  
Main  
Advanced Security  
Power  
Exit  
Boot Device Priority  
Hard Disk Drives  
Removable Devices  
ATAPI CD-ROM Drives  
The submenu shown in Table 25 is for setting hard disk drives.  
Table 25. Hard Disk Drives Submenu  
Feature  
Options  
Description  
1st Hard Disk Drive  
(Note)  
Dependent on installed Specifies the boot sequence from the available hard disk  
hard drives  
drives. To specify boot sequence:  
1. Select the boot device with <> or <>.  
2. Press <Enter> to set the selection as the intended  
boot device.  
Note: This boot device submenu appears only if at least one boot device of this type is installed. This list will  
display up to twelve hard disk drives, the maximum number of hard disk drives supported by the BIOS.  
Removable Devices Submenu  
Boot  
Maintenance  
Main  
Advanced Security  
Power  
Exit  
Boot Device Priority  
Hard Disk Drives  
Removable Devices  
ATAPI CD-ROM Drives  
The submenu in shown Table 26 is for setting removable devices.  
Table 26. Removable Devices Submenu  
Feature  
Options  
Description  
1st Removable Device  
(Note)  
Dependent on installed  
removable devices  
Specifies the boot sequence from the available  
removable devices. To specify boot sequence:  
1. Select the boot device with <> or <>.  
2. Press <Enter> to set the selection as the  
intended boot device.  
Note: This boot device submenu appears only if at least one boot device of this type is installed. This list will  
display up to four removable devices, the maximum number of removable devices supported by the BIOS.  
65  
Intel Desktop Boards D845HV and D845WN Product Guide  
ATAPI CD-ROM Drives  
Boot  
Maintenance  
Main  
Advanced Security  
Power  
Exit  
Boot Device Priority  
Hard Disk Drives  
Removable Devices  
ATAPI CD-ROM Drives  
The submenu shown in Table 27 is for setting ATAPI CD-ROM drives.  
Table 27. ATAPI CD-ROM Drives Submenu  
Feature  
Options  
Description  
1st ATAPI CD-ROM Drive Dependent on installed  
Specifies the boot sequence from the available  
ATAPI CD-ROM drives. To specify boot sequence:  
(Note)  
ATAPI CD-ROM drives  
1. Select the boot device with <> or <>.  
2. Press <Enter> to set the selection as the  
intended boot device.  
Note: This boot device submenu appears only if at least one boot device of this type is installed. This list will display  
up to four ATAPI CD-ROM drives, the maximum number of ATAPI CD-ROM drives supported by the BIOS.  
Exit Menu  
Maintenance  
Main  
Advanced Security  
Power  
Boot  
Exit  
The menu shown in Table 28 is used to exit the BIOS Setup program, saving changes, and loading  
and saving defaults.  
Table 28. Exit Menu  
Feature  
Description  
Exit Saving Changes  
Exits and saves the changes in CMOS SRAM.  
Exit Discarding Changes Exits without saving any changes made in the BIOS Setup program.  
Load Setup Defaults  
Load Custom Defaults  
Save Custom Defaults  
Loads the factory default values for all the Setup options.  
Loads the custom defaults for Setup options.  
Saves the current values as custom defaults. Normally, the BIOS reads the  
Setup values from flash memory. If this memory is corrupted, the BIOS reads the  
custom defaults. If no custom defaults are set, the BIOS reads the factory  
defaults.  
Discard Changes  
Discards changes without exiting Setup. The option values present when the  
computer was turned on are used.  
66  
5 Technical Reference  
Board Connectors  
The board connectors can be divided into three groups:  
Back panel connectors  
Midboard connectors  
Audio connectors  
Power and hardware connectors  
Add-in board and peripheral interface connectors  
Front panel connectors  
CAUTION  
Many of the midboard and front panel connectors provide operating voltage (+5 V dc and  
+12 V dc, for example) to devices inside the computer chassis, such as fans and internal  
peripherals. These connectors are not overcurrent protected. Do not use these connectors for  
powering devices external to the computer chassis. A fault in the load presented by the external  
devices could cause damage to the computer, the interconnecting cable, and the external devices  
themselves.  
67  
Intel Desktop Boards D845HV and D845WN Product Guide  
Back Panel Connectors  
Figure 19 shows the back panel connectors on the board.  
A
B
E
G
I
C
D
F
H
J
K L  
OM11990  
Item  
A
Description  
PS/2 mouse port  
PS/2 keyboard port  
USB port 0  
Color  
Green  
Purple  
Black  
B
C
D
E
USB port 1  
Black  
Parallel port  
Serial port A  
RJ-45 (optional)  
USB port 2  
Burgundy  
Teal  
F
G
H
I
Black  
Black  
USB port 3  
Black  
J
Mic in  
Pink  
K
Audio line out  
Lime green  
Light blue  
L
Audio line in  
Figure 19. Back Panel Connectors  
NOTE  
The line out connector, located on the back panel, is designed to power either headphones or  
amplified speakers only. Poor audio quality may occur if passive (non-amplified) speakers are  
connected to this output.  
68  
Technical Reference  
Midboard Connectors  
Audio Connectors  
Figure 20 shows the location of the audio connectors.  
A
B C  
4
1
4
1
1
2
9 10  
OM11991  
Item  
Description  
Color  
A
B
C
Front panel audio  
Black  
Black  
White  
CD-ROM (ATAPI)  
Auxiliary line in (ATAPI)  
Figure 20. Audio Connectors  
69  
Intel Desktop Boards D845HV and D845WN Product Guide  
Power and Hardware Connectors  
CAUTION  
Failure to use an ATX12V power supply, or not connecting the additional power supply lead to the  
D845HV or D845WN board may result in damage to the desktop board.  
The D845HV and D845WN boards require an ATX12V compliant power supply to function  
according to desktop board specifications. Both boards have two ATX12V compliant power supply  
connectors that are needed to provide extra power to the Intel 845 chipset and Pentium 4 processor.  
Figure 21 shows the power and hardware connectors.  
A
B
1
1
2
3
4
1
C
1 2  
D
E
8
11  
9
20  
10  
1
1
1
1
H G F  
OM11992  
Item  
Description  
Item  
Description  
A
B
C
D
ATX12V power  
E
F
G
H
Main power  
SCSI hard drive activity LED  
Chassis intrusion  
Rear chassis fan (tachometer input)  
Processor fan (tachometer input)  
Serial port B  
Front chassis fan  
Figure 21. Power and Hardware Control Connectors  
70  
Technical Reference  
Add-In Card and Peripheral Interface Connectors  
Figure 22 shows the add-in card and peripheral interface connectors for the D845HV board.  
A
B
C
D E  
40  
39  
2
1
39  
40  
2
1
2
1
34  
33  
H
G
F
OM11993  
Item  
A
Description  
Item  
E
Description  
CNR (optional)  
AGP  
B
PCI bus connector 3  
PCI bus connector 2  
PCI bus connector 1  
F
Diskette drive  
Primary IDE  
Secondary IDE  
C
G
D
H
Figure 22. D845HV Board Add-in Card and Peripheral Interface Connectors  
71  
Intel Desktop Boards D845HV and D845WN Product Guide  
Figure 23 shows the add-in card and peripheral interface connectors for the D845WN board.  
A
B
C
D
E
F
G H  
40  
39  
2
1
39  
40  
2
1
2
1
34  
33  
K
J
I
OM12041  
Item  
Description  
Item  
Description  
PCI bus connector 1  
AGP  
A
B
C
D
E
F
CNR (optional)  
G
H
I
PCI bus connector 6  
PCI bus connector 5  
PCI bus connector 4  
PCI bus connector 3  
PCI bus connector 2  
Diskette drive  
Primary IDE  
Secondary IDE  
J
K
Figure 23. D845WN Board Add-in Card and Peripheral Interface Connectors  
72  
Technical Reference  
Front Panel Connectors  
Figure 24 shows the location of the front panel connectors.  
1 2  
9 10  
7
10  
2
1
16  
1
15  
2
1
B
C
D
A
OM11994  
Item  
A
Description  
Front panel  
B
Alternate power/sleep LED  
Front panel USB  
Front panel audio  
C
D
Figure 24. Front Panel Connectors  
73  
Intel Desktop Boards D845HV and D845WN Product Guide  
Desktop Board Resources  
Memory Map  
Table 29. System Memory Map  
Address Range (decimal) Address Range (hex)  
Size  
Description  
1024 K - 3145728 K  
960 K - 1024 K  
896 K - 960 K  
100000 - 1BFFFFFFF  
F0000 - FFFFF  
3071 MB  
64 KB  
64 KB  
96 KB  
Extended Memory  
Runtime BIOS  
Reserved  
E0000 - EFFFF  
800 K - 896 K  
C8000 - DFFFF  
Available high DOS memory (open  
to the PCI bus)  
640 K - 800 K  
639 K - 640 K  
A0000 - C7FFF  
9FC00 - 9FFFF  
160 KB  
1 KB  
Video memory and BIOS  
Extended BIOS data (movable by  
memory manager software)  
512 K - 639 K  
0 K - 512 K  
80000 - 9FBFF  
00000 - 7FFFF  
127 KB  
512 KB  
Extended conventional memory  
Conventional memory  
DMA Channels  
Table 30. DMA Channels  
DMA Channel Number  
Data Width  
8 or 16 bits  
8 or 16 bits  
8 or 16 bits  
8 or 16 bits  
8 or 16 bits  
16 bits  
System Resource  
0
1
2
3
4
5
6
7
Parallel port  
Diskette drive  
Parallel port (for ECP or EPP)  
DMA controller  
Open  
16 bits  
Open  
16 bits  
Open  
74  
Technical Reference  
I/O Map  
Table 31. I/O Map  
Address (hex)  
0000 - 000F  
0020 - 0021  
0040 - 0043  
0060  
Size  
Description  
16 bytes  
2 bytes  
4 bytes  
1 byte  
DMA controller  
Programmable Interrupt Control (PIC)  
System timer  
Keyboard controller bytereset IRQ  
System speaker  
0061  
1 byte  
0064  
1 byte  
Keyboard controller, CMD / STAT byte  
System CMOS / Real Time Clock  
System CMOS  
0070 - 0071  
0072 - 0073  
0080 - 008F  
0092  
2 bytes  
2 bytes  
16 bytes  
1 byte  
DMA controller  
Fast A20 and PIC  
00A0 - 00A1  
00B2 - 00B3  
00C0 - 00DF  
00F0  
2 bytes  
2 bytes  
32 bytes  
1 byte  
PIC  
APM control  
DMA  
Numeric data processor  
Secondary IDE channel  
Primary IDE channel  
LPT3  
0170 - 0177  
01F0 - 01F7  
0228 - 022F*  
0278 - 027F*  
02E8 - 02EF*  
02F8 - 02FF*  
0376  
8 bytes  
8 bytes  
8 bytes  
8 bytes  
8 bytes  
8 bytes  
1 byte  
LPT2  
COM4 / video (8514A)  
COM2  
Secondary IDE channel command port  
Secondary IDE channel status port  
LPT1  
0377, bits 6:0  
0378 - 037F  
03B0 - 03BB  
03C0 - 03DF  
03E8 - 03EF  
03F0 - 03F5  
03F6  
7 bits  
8 bytes  
12 bytes  
32 bytes  
8 bytes  
6 bytes  
1 byte  
Video (VGA)  
Video (VGA)  
COM3  
Diskette channel 1  
Primary IDE channel command port  
COM1  
03F8 - 03FF  
04D0 - 04D1  
LPTn + 400  
0CF8 - 0CFB**  
0CF9***  
8 bytes  
2 bytes  
8 bytes  
4 bytes  
1 byte  
Edge / level triggered PIC  
ECP port, LPTn base address + 400h  
PCI configuration address register  
Turbo and reset control register  
PCI configuration data register  
Primary bus master IDE registers  
Secondary bus master IDE registers  
0CFC - 0CFF  
FFA0 - FFA7  
FFA8 - FFAF  
4 bytes  
8 bytes  
8 bytes  
continued  
75  
Intel Desktop Boards D845HV and D845WN Product Guide  
Table 31. I/O Map (continued)  
Address (hex)  
Description  
96 contiguous bytes starting on a 128-byte  
divisible boundary  
ICH2 (ACPI + TCO)  
64 contiguous bytes starting on a 64-byte  
divisible boundary  
D845HV and D845WN board resources  
ICH2 (USB controller #1)  
ICH2 (SMBus)  
32 contiguous bytes starting on a 32-byte  
divisible boundary  
16 contiguous bytes starting on a 16-byte  
divisible boundary  
4096 contiguous bytes starting on a 4096-byte Intel 82801BA PCI bridge  
divisible boundary  
256 contiguous bytes starting on a 256-byte  
divisible boundary  
ICH2 audio mixer  
64 contiguous bytes starting on a 64-byte  
divisible boundary  
ICH2 audio bus mixer  
ICH2 (USB controller #2)  
ICH2/Intel 82562ET (optional)  
LPC47M142  
32 contiguous bytes starting on a 32-byte  
divisible boundary  
64 contiguous bytes starting on a 64-byte  
divisible boundary  
96 contiguous bytes starting on a 128-byte  
divisible boundary  
*
Default, but can be changed to another address range.  
** Dword access only.  
*** Byte access only.  
76  
Technical Reference  
Interrupts  
Table 32. Interrupts  
IRQ  
NMI  
0
System Resource  
I/O channel check  
Reserved, interval timer  
1
Reserved, keyboard buffer full  
2
Reserved, cascade interrupt from slave PIC  
3
COM2*  
4
COM1*  
5
LPT2 (Plug and Play option) / **  
6
Diskette drive controller  
7
LPT1*  
8
Real time clock  
9
**  
10  
11  
12  
13  
14  
15  
**  
**  
Onboard mouse port (if present, else user available)  
Reserved, math coprocessor  
Primary IDE (if present, else user available)  
Secondary IDE (if present, else user available)  
* Default, but can be changed to another IRQ.  
** Dynamically allocated for all PCI/AGP devices and slots.  
77  
Intel Desktop Boards D845HV and D845WN Product Guide  
78  
A Error Messages and Indicators  
The D845HV and D845WN boards report POST errors in two ways:  
By sounding a beep code  
By displaying an error message on the monitor  
BIOS Beep Codes  
The BIOS beep codes are listed in Table 33. The BIOS also issues a beep code (one long tone  
followed by two short tones) during POST if the video configuration fails (a faulty video card or  
no card installed) or if an external ROM module does not properly checksum to zero.  
Table 33. Beep Codes  
Number of Beeps Description  
1
Refresh failure  
2
Parity cannot be reset  
3
First 64 K memory failure  
4
Timer not operational  
5
Processor failure (Reserved; not used)  
8042 GateA20 cannot be toggled (memory failure or not present)  
Exception interrupt error  
6
7
8
Display memory R/W error  
9
(Reserved; not used)  
10  
11  
CMOS Shutdown register test error  
Invalid BIOS (such as, POST module not found)  
79  
Intel Desktop Boards D845HV and D845WN Product Guide  
BIOS Error Messages  
When a recoverable error occurs during the POST, the BIOS displays an error message describing  
the problem.  
Table 34. BIOS Error Messages  
Error Message  
Explanation  
GA20 Error  
An error occurred with Gate-A20 when switching to protected  
mode during the memory test.  
Pri Master HDD Error  
Pri Slave HDD Error  
Sec Master HDD Error  
Sec Slave HDD Error  
Could not read sector from corresponding drive.  
Pri Master Drive - ATAPI Incompatible  
Pri Slave Drive - ATAPI Incompatible  
Sec Master Drive - ATAPI Incompatible  
Sec Slave Drive - ATAPI Incompatible  
Corresponding drive is not an ATAPI device. Run Setup to make  
sure device is selected correctly.  
A: Drive Error  
B: Drive Error  
No response from the diskette drive.  
CMOS Battery Low  
The battery may be losing power. Replace the battery soon.  
CMOS Display Type Wrong  
The display type is different than what has been stored in CMOS.  
Check Setup to make sure type is correct.  
CMOS Checksum Bad  
CMOS Settings Wrong  
CMOS Date/Time Not Set  
The CMOS checksum is incorrect. CMOS memory may have been  
corrupted. Run Setup to reset values.  
CMOS values are not the same as the last boot. These values  
have either been corrupted or the battery has failed.  
The time and/or date values stored in CMOS are invalid. Run  
Setup to set correct values.  
DMA Error  
Error during read/write test of DMA controller.  
Error occurred trying to access diskette drive controller.  
Error occurred trying to access hard disk controller.  
NVRAM is being checked to see if it is valid.  
NVRAM was invalid and has been updated.  
FDC Failure  
HDC Failure  
Checking NVRAM.....  
Update OK!  
Updated Failed  
Keyboard Is Locked  
NVRAM was invalid but was unable to be updated.  
The system keyboard lock is engaged. The system must be  
unlocked to continue to boot.  
Keyboard Error  
Error in the keyboard connection. Make sure keyboard is  
connected properly.  
KB/Interface Error  
Keyboard interface test failed.  
continued  
80  
Error Messages and Indicators  
Table 34. BIOS Error Messages (continued)  
Error Message  
Explanation  
Memory Size Decreased  
Memory size has decreased since the last boot. If no memory  
was removed, then memory may be bad.  
Memory Size Increased  
Memory Size Changed  
Memory size has increased since the last boot. If no memory was  
added, there may be a problem with the system.  
Memory size has changed since the last boot. If no memory was  
added or removed, then memory may be bad.  
No Boot Device Available  
Off Board Parity Error  
System did not find a device to boot.  
A parity error occurred on an offboard card. This error is followed  
by an address.  
On Board Parity Error  
Parity Error  
A parity error occurred in onboard memory. This error is followed  
by an address.  
A parity error occurred in onboard memory at an unknown  
address.  
NVRAM / CMOS / PASSWORD  
cleared by Jumper  
NVRAM, CMOS, and passwords have been cleared. The system  
should be powered down and the jumper removed.  
<CTRL_N> Pressed  
CMOS is ignored and NVRAM is cleared. User must enter Setup.  
81  
Intel Desktop Boards D845HV and D845WN Product Guide  
82  
B Regulatory Compliance  
This appendix contains:  
Safety standards, electromagnetic compatibility (EMC) regulations, and product certification  
markings for the D845HV and D845WN desktop boards.  
Instructions and precautions for integrators who are installing this desktop board in a chassis.  
Safety Regulations  
This desktop board complies with the safety regulations stated in Table 35 when correctly installed  
in a compatible host system.  
Table 35. Safety Regulations  
Regulation  
Title  
UL 1950/CSA C22.2 No. 950,  
3rd edition  
Bi-National Standard for Safety of Information Technology Equipment  
including Electrical Business Equipment. (USA and Canada)  
EN 60950, 2nd Edition, 1992  
The Standard for Safety of Information Technology Equipment  
(with Amendments 1, 2, 3, and 4) including Electrical Business Equipment. (European Union)  
IEC 60950, 2nd edition, 1991  
The Standard for Safety of Information Technology Equipment  
(with Amendments 1, 2, 3, and 4) including Electrical Business Equipment. (International)  
EMKO-TSE (74-SEC) 207/94  
Summary of Nordic deviations to EN 60950. (Norway, Sweden,  
Denmark, and Finland)  
EMC Regulations  
The desktop board complies with the EMC regulations stated in Table 36 when correctly installed  
in a compatible host system.  
Table 36. EMC Regulations  
Regulation  
Title  
FCC Class B  
Title 47 of the Code of Federal Regulations, Parts 2 and 15, Subpart B,  
Radiofrequency Devices. (USA)  
ICES-003 (Class B)  
Interference-Causing Equipment Standard, Digital Apparatus. (Canada)  
EN55022: 1998 (Class B)  
Limits and methods of measurement of Radio Interference Characteristics  
of Information Technology Equipment. (European Union)  
EN55024: 1998  
Information Technology Equipment Immunity Characteristics Limits and  
methods of measurement. (European Union)  
AS/NZS 3548 (Class B)  
Australian Communications Authority, Standard for Electromagnetic  
Compatibility. (Australia and New Zealand)  
CISPR 22, 3rd Edition,  
(Class B)  
Limits and methods of measurement of Radio Disturbance Characteristics  
of Information Technology Equipment. (International)  
CISPR 24: 1997  
Information Technology Equipment Immunity Characteristics Limits  
and Methods of Measurement. (International)  
83  
Intel Desktop Boards D845HV and D845WN Product Guide  
Product Certification Markings  
The desktop boards have the following product certification markings:  
UL joint US/Canada Recognized Component mark: consists of small c followed by a stylized  
backward UR and followed by a small US. Includes adjacent UL file number for Intel desktop  
boards: E210882 (component side).  
FCC Declaration of Conformity logo mark for Class B equipment; includes Intel name and  
model designation (solder side).  
CE mark: declaring compliance to European Union (EU) EMC directive (89/336/EEC) and  
Low Voltage directive (73/23/EEC) (component side).  
Australian Communications Authority (ACA) C-Tick mark: consists of a stylized C overlaid  
with a check (tick) mark (component side), followed by Intel supplier code number, N-232.  
Printed wiring board manufacturers recognition mark: consists of a unique UL recognized  
manufacturers logo, along with a flammability rating (94V-0) (solder side).  
PB part number: Intel bare circuit board part number (solder side):  
A63118-002 (for D845HV board)  
A64163-001 (for D845WN board)  
Also includes SKU number starting with AA followed by additional alphanumeric  
characters.  
Battery + Side Upmarking: located on the component side of the board in close proximity  
to the battery holder.  
Korean MIC logo mark: denotes Korean EMC certification (component side). Additional  
certification information is provided below:  
1. Product Name (model)  
2. Certificate ID  
3. Applicant: Intel Korea Ltd.  
4. Date of manufacture as separate marking on product  
5. Manufacturer (country of origin)  
84  
Regulatory Compliance  
Korean MIC logo mark for the D845HV board  
Korean MIC logo mark for the D845WN board  
Installation Precautions  
When you install and test the desktop board, observe all warnings and cautions in the installation  
instructions.  
To avoid injury, be careful of:  
Sharp pins on connectors  
Sharp pins on printed circuit assemblies  
Rough edges and sharp corners on the chassis  
Hot components (like processors, voltage regulators, and heat sinks)  
Damage to wires that could cause a short circuit  
Observe all warnings and cautions that instruct you to refer computer servicing to qualified  
technical personnel.  
Installation Instructions  
CAUTION  
Follow these guidelines to meet safety and regulatory requirements when installing this board  
assembly.  
Read and adhere to all of these instructions and the instructions supplied with the chassis and  
associated modules. If the instructions for the chassis are inconsistent with these instructions or  
the instructions for associated modules, contact the suppliers technical support to find out how  
you can ensure that your computer meets safety and regulatory requirements. If you do not follow  
these instructions and the instructions provided by chassis and module suppliers, you increase  
safety risk and the possibility of noncompliance with regional laws and regulations.  
85  
Intel Desktop Boards D845HV and D845WN Product Guide  
Ensure Electromagnetic Compatibility (EMC) Compliance  
Before computer integration, make sure that the power supply and other modules or peripherals, as  
applicable, have passed Class B EMC testing and are marked accordingly.  
In the installation instructions for the host chassis, power supply, and other modules pay close  
attention to the following:  
Product certifications or lack of certifications  
External I/O cable shielding and filtering  
Mounting, grounding, and bonding requirements  
Keying connectors when mating the wrong connectors could be hazardous  
If the power supply and other modules or peripherals, as applicable, are not Class B EMC  
compliant before integration, then EMC testing is required on a representative sample of the newly  
completed computer.  
Chassis and Component Certifications  
Ensure that the chassis and certain components; such as the power supply, peripheral drives,  
wiring, and cables; are components certified for the country or market where used. Agency  
certification marks on the product are proof of certification. Typical product certifications include:  
In Europe  
The CE marking signifies compliance with all applicable European requirements. If the chassis  
and other components are not properly CE marked, a suppliers Declaration of Conformity  
statement to the European EMC directive and Low Voltage directive (as applicable), should be  
obtained. Additionally, other directives, such as the Radio and Telecommunications Terminal  
Equipment (R&TTE) directive may also apply depending on product features.  
In the United States  
A certification mark by a Nationally Recognized Testing Laboratory (NRTL) such as UL, CSA, or  
ETL signifies compliance with safety requirements. Wiring and cables must also be UL listed or  
recognized and suitable for the intended use. The FCC Class B logo for home or office use  
signifies compliance with electromagnetic interference (EMI) requirements.  
In Canada  
A nationally recognized certification mark such as CSA or cUL signifies compliance with safety  
requirements. The Industry Canada statement at the front of this product guide demonstrates  
compliance with Canadian EMC regulations. Industry Canada recognizes and accepts FCC  
certification as denoting compliance with national electromagnetic interference (emissions)  
requirements.  
Prevent Power Supply Overload  
Do not overload the power supply output. To avoid overloading the power supply, make sure that  
the calculated total current loads of all the modules within the computer is less than the output  
current rating of each of the power supplies output circuits.  
86  
Regulatory Compliance  
Place Battery Marking  
There is insufficient space on this desktop board to provide instructions for replacing and  
disposing of the Lithium ion coin cell battery. For system safety certification, the following  
statement or equivalent statement is required to be permanently and legibly marked on the chassis  
near the battery.  
CAUTION  
Risk of explosion if battery is incorrectly replaced.  
Replace with only the same or equivalent type recommended by the manufacturer. Dispose of used  
batteries according to the manufacturers instructions.  
Use Only for Intended Applications  
All Intel desktop processor boards are evaluated as Information Technology Equipment (I.T.E.) for  
use in personal computers for installation in homes, offices, schools, computer rooms, and similar  
locations. The suitability of this product for other applications or environments, such as medical,  
industrial, alarm systems, test equipment, etc. may require further evaluation.  
87  
Intel Desktop Boards D845HV and D845WN Product Guide  
88  

Intel Computer Hardware SE7210TP1 E User Manual
JVC AV 21YMG7 User Manual
JVC AV 25LXB User Manual
JVC AV 28H50SU User Manual
Keytec KTT 019CAF User Manual
Marantz PMD690 User Manual
Melissa Cooker Hood with Glass Plate 258 014 User Manual
Microsoft Laser Desktop Keyboard 6000 v3 0 User Manual
Miele CS1322 User Manual
Philips HDR3700 User Manual