R
COLOR TELEVISION
OWNER'S MANUAL
TC14FS68
Part No: IES031110
C
2003. Hisense Electric Corp. All rights reserved
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELEC-
TRIC SHOCK, DO NOT REMOVE
COVER(OR BACK).NO USER-
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance( servicing ) instructions in
the literature accompanying the set.
CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BYTHE PARTY
RESPONSIBLE FOR COMPLIANCE WITH THE FCC RULES COULD VOID THE
USERS AUTHORITYTO OPERATE THIS EQUIPMENT.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOTEXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Important safety instructions
1. READ THESE INSTRUCTIONS
All the safety and operating instructions should be read before the product is operated.
2. KEEP THESE INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED ALL WARNINGS
All warnings on the product and in the operating instructions should be adhered to.
4. FOLLOW ALL INSTRUCTIONS
All operating and use instructions should be followed.
5. DO NOT USE THIS APPARATUS NEAR WATER
Do not use the product near water. For example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool, and the like.
6. CLEAN ONLY WITH DRY CLOTH
Unplug the TV from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
7. DO NOT BLOCK ANY VENTILATION OPENINGS
Slots and openings in the cabinet back or bottom are provided for ventilation, to ensure reliable operation of the
TV and to protect it from overheating. These openings must not be blocked or covered. The openings should never
be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed
near or over a radiator or heat resource. This product should not be placed in a built-in installation such as a bookcase
or rack unless proper ventilation is provided or the manufacture's instructions have been adhere to.
8. DO NOT INSTALL NEAR ANY HEAT SOURCES
This product should be situated away from heat sources such as radiators, stoves, or other products (including amplifiers)
that produce heat.
9. DO NOT DEFEAT THE SAFETY PURPOSE OF THE POLARIZED OR GROUNDING-TYPE PLUG
A polarized plug has two blades with one wider than the other. A grounding- type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. PROTECT THE POWER CORD FROM BEING WALKED ON OR PINCHED PARTICULARLY AT PLUGS, CONVENIENCE
RECEPTACLES, AND THE POINT WHERE THEYEXIT FROM THE APPARATUS.
11. ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED BYTHE MANUFACTURE.
-1-
Important safety instructions
12. USE ONLY WITH CART, STAND, TRIPOD, BRACKET, OR TABLE SPECIFIED BY
THE MANUFACTURER, OR SOLD WITH THE APPARATUS. WHEN ACART IS USED,
USE CAUTION WHEN MOVING THE CART/APPARATUS COMBINATION TO AVOID
INJURY FROM TIP-OVER.
Do not place this TV on an unstable cart, stand, tripod, bracket ,or table. The TV may
fall, causing serious injury to someone, and serious damage to the appliance. An TV
and cart combination should be moved with care. Quick stops, excessive force, and
uneven surfaces may cause the product and cart combination to overturn.
13. UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED
FOR LONG PERIODS OF TIME.
For added Protection for this TV receiver during a lightning storm, or when it is left
unattended and unused for long period of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent damage to the TV due to
lightning and power line surges.
S3126A
14. REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL. SERVICING IS REQUIRED WHEN THE APPARATUS
HAS BEEN DAMAGEDIN ANY WAY, SUCH AS POWER-SUPPLY CORD OR PLUG IS DAMAGED, LIQUID HAS BEEN
SPILLED OR OBJECTS HAVE FALLEN INTO THE APPARATUS, THE APPARATUS HAS BEENEXPOSED TO RAIN OR
MOISTURE, DOES NOT OPERATE NORMALLY, OR HAS BEEN DROPPED.
15. POWER SOURCE
This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of the type
of power supply to your home, consult your appliance dealer or local power company . For TVs intended to operate from
battery power, or other sources, refer to the operating instructions.
16. POWER CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against
them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
17. OUTDOOR ANTENNA GROUNDING
FIGURE A
If an outside antenna or cable system is connected to
the TV, be sure the antenna or cable system is grounded
EXAMPLE OF ANTENNA GROUNDINGAS PER
NATIONAL ELECTRICAL CODE
ANTENNA LEAD
IN WIRE
to provide some protection against voltage surges
and built-up static charges. Section 810 of the National
Electrical Code, ANSI/NFPANO.70,provides
information with respect to proper grounding
of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit ,
size of grounding conductors, location of
antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding
electrode.(Fig.A)
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING WIRES
GROUND CLAMPS
18. LIGHTNING
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
S2898A
For added protection for this TV receiver during
a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent
damage to the TV due to lightning and power line surges.
19. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines, or other electric light or power
circuits, or where it can fall into such power lines or circuits. When installing an outside atenna system, extreme care should
be taken to keep from touching such power lines or circuits as contact with them might be fatal.
20. OVERLOADING
Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
21. OBJECT AND LIQUID ENTRY
Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short out parts
that could result in fire or electric shock. Never spill liquid of any kind into the TV.
22. SERVICING
Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
23. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer
that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to
persons or other hazards.
24. SAFETY CHECK
Upon completion of any service or repairs to this TV, ask the service technician to perform routine safety checks to determine
that the TV is in proper operating condition.
-2-
Brief Operating Instructions
1. Connection
Connect the antenna lead or CATV cable or external equipments ( such as Antenna, Cable TV ,VCD,DVD,
VTR,Set top box,etc .) to the corresponding terminals or interface on the TV rear ( please refer to the
owner s manual of the equipment to be connected as well ) and confirm that the signal source is avaliable
and works normally.
VIDEO
VIDEO
VIDEO INPUT
VIDEO OUTPUT
L(MONO) L(MONO)
AUDIO INPUT(LEFT)
AUDIO INPUT(RIGHT)
AUDIO OUTPUT(LEFT)
AUDIO OUTPUT(RIGHT)
R
R
S-VIDEO
INPUT OUTPUT
2. The remote control
Open the battery cover of the remote control and install two AA size batteries and then close
the battery cover .
POWER: Power on / off
MUTE
POWER
MUTE: Mute the sound
2
5
3
6
1
4
7
0
CHANNEL NUMBER : Direct Channel
selection
8
RECALL
9
DISPLY
DISPLAY: Display the current channel
number
V.CHIP SLEEP
TV/AV
LOCK
MENU
RECALL: Return to previous channel
+
+
SAP
P.P
V-CHIP:Block certain TV channels
according to the FCC requirements
_
_
CH
VOL
TV/AV: TV / AV selection
LOCK: Child lock
P.P : Personal preset
SAP: SAP/stereo/Mono selection
CH+/-:Channel selection
V0L+/-:Increase or decrease sound
-3-
3.Switching on/off
1) Connect the TV to power outlet. The power indicator will glow in red color. Press the power switch or the POWER
button on the remote control to turn on the TV.
2) Press the power switch or the POWER button on the remote control to turn off the TV.
4.Signal source selection
Press the TV/AV button to select TV or AV mode.
5.Air/Cable selection
You can select the signal receiving method according to the following steps:
1) Press the MENU button repeatedly until the PRESET menu appears as
shown in the right .
PRESET
Position
Add/Delete
Antenna
Auto-search
17
Add
Air
2) Press the CH+ or CH- button to select the item Antenna.
3) Press the VOL+ or VOL- to change the item between Air and Cable.
:
: Adjust
Select
PRESET
Position
Add/Delete
Antenna
Auto-search
17
Add
Air
6.Channel search
1) Press the MENU button repeatedly until the PRESET menu appears as
shown in the right.
:
: Adjust
Select
2) Press the CH+ or CH- button to select the item Auto-search.
3) Press the VOL+ or VOL- to start to auto-search programs.
PICTURE
7.Picture adjustment
1) Press the MENU button, and the PICTURE menu appears as shown in the right.
2) Press the CH+ or CH- to select the item you want to adjust.
3) Press the VOL+ or VOL- to adjust the level .
Bright
Contrast
Color
Sharp
Tint
80
80
80
80
00
:
: Adjust
Select
AUDIO
Volume
Balance
8.Sound adjustment
1) Press the MENU button repeatedly until AUDIO menu appears as shown right .
2) Press the CH+ or CH- to select the item you want to adjust.
3) Press the VOL+ or VOL- to adjust the item.
50
00
:
: Adjust
Select
9.Timer setting
1) Press the MENU button repeatedly until the CLOCK menu appears as
shown in the right.
2) Press the CH+ or CH- to select the item you want to set.
3) Press VOL+ to set hour and press VOL- to set minute.
CLOCK
Time
On-time
Off-time
Attention
Exchange
Position
:
:
:
:
:
:
: Adjust
Select
Note1: All keys mentioned above are on the remote control unless indicated otherwise..
Note2: For more detailed information, please refer to the owner's manual.
-4-
Learning about your new TV
You can operate your TV by using the buttons on the front panel or the remote control. All the terminals on
the front and the back panel provide the connections you will need to connect other equipment to your TV.
Front Controls
Back Connections
S-VIDEO
RIGHT
LEFT
VIDEO
POWER SWITCH
INFRARED SENSOR
POWER INDICATOR
Aerial socket
S-Video
AC CORD AND PLUG
VIDEO
VIDEO
Front panel
VOLUME DOWN
VOLUME UP
Video input
Video output
CHANNEL DOWN
CHANNEL UP
MENU
TV/AV
L(MONO) L(MONO)
Audio output(left)
Audio output(right)
CH
Audio input(left)
Audio input(right)
TV/AV
MENU
VOL
AUDIO
R
R
INPUT OUTPUT
Note: The above figures are for reference only, please refer to the actual units to determine their appearance.
Caution:
The TV power plug has one prong wider than the other and will fit only one way into a standard
electrical outlet(120VAC,60Hz).If the plug does not fit into the outlet, try turning it around. If the
plug still does not fit, the outlet is probably non-standard and must be replaced by a qualified
electrician.
Do not tamper with the plug or try to force it into a non-standard outlet.
Selecting a location for the TV
1) Place the TV on the floor or on a sturdy platform in a location where light does not directly hit the screen.
2) Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause
overheating, which may damage the TV.
Connecting your TV
If you haven't connected electronic equipment before, or you have been frustrated in the past, you may wish
to read this section.(Cables are not supplied.)
Caution: Do not plug the TV in until you have finished connecting all of your equipment.
-5-
Connecting your TV
Connecting the audiovisual equipments
To enjoy the programs coming from your audiovisual equipments such as VCR, DVD, Satellite receiver, Camcorder,
Audio amplifier and etc, the signal must be received by the set via the AV input terminals at rear. You can also record
the TV programs to a video tape by VCR. Connect the devices as the following figure.
Note:
1.The program coming through AV input terminals can't be re-recorded via AV output terminals.
2.When the TV is in AV mode, there is no signal output on the OUTPUT terminals.
3.When connecting S-VIDEO, Audio Left and Right cables should be connected to AUDIO INPUT terminals.
Also the S-VIDEO and VIDEO INPUT terminals can't be connected simultaneously. When you want to watch
TV program, please shut the S-VIDEO signal.
RECORD THE TV PROGRAM
TV
From the output terminals
VCR/DVD
VIDEO
VIDEO
L(MONO) L(MONO)
INPUT
VIDEO
VIDEO
RIGHT
RIGHT
LEFT(MONO)
LEFT(MONO)
AUDIO
S-VIDEO
R
R
OUTPUT
INPUT OUTPUT
PLAY VIDEO TAPE, DVD etc.
To the input terminals
Connecting the aerial
To enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor aerial (not supplied).
Perfect picture quality requires a good signal and generally means that an outdoor aerial must be implemented. The
exact type and location of the aerial will depend on your particular area. Consult your local dealer or service
personnel for best advice. If you are a subscriber of your local CATV net, the outdoor or indoor aerial is not needed.
Connect the equipments as the following figure.
Plug(not supplied)
COAXIAL CABLE(75
)
REAR VIEW
AERIAL SOCKET
The signal comes from:
! An outdoor aerial
! An indoor aerial
TWIN-LEAD FEEDER(300
)
Adaptor (not supplied)
Loosen the screw
Insert the feeder in
Tighten the screw
S-VIDEO
-6-
Connecting your TV
Connecting a cable converter box
This television has an extended tuning range and can tune most cable channels without using a cable
company supplied converter box. Some cable companies offer [premium pay channels] in which signal is
scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which
is generally provided by the cable company.
For subscribers to Basic Cable TV Service
For basic cable service not requiring a Converter/Descrambler box, connect the CATV 75 ohm Coaxial
Cable directly to the Antenna Jack on the back of the television.
For subscribers to Scrambled Cable TV Service
If you subscribe to a cable service which requires the use of a Converter/Descrambler box, connect the
incoming cable to the Converter/Descrambler box and connect the output of the box to the Antenna Jack
on the back of the television. Follow the connections shown below. Set the television to the output of the
Converter/Descrambler box(usually channel 3 or 4)and use the Converter/Descrambler box to select
channels.
For Subscribers to Unscrambled Basic Cable with Scrambled Premium Channels
If you subscribe to a cable service in which basic cable channels are unscrambled and premium channels
require the use of a Converter/Descrambled box, you may wish to use a two-set signal splitter(sometimes
called [two set coupler]) and an A/B Switch box from the cable installer or an electronics supply store.
Follow the connections shown below. With the switch in the B position, you can directly tune any
screwed channels on your TV. With the switch in the A position, tune your TV to the output of the
Converter/Descrambler box(usually channel 3 or 4) and use the box to tune scrambled channels.
Note:
When you use a converter box with your TV, there may be features that you cannot
program using the remote control.
VIDEO
VIDEO
L(MONO) L(MONO)
Converter/Descrambler
Converter/Descrambler
AUDIO
S-VIDEO
R
R
INPUT OUTPUT
A/B Switch
Splitter
-7-
Using the remote control
Preparing the remote control for use
Installing the remote control batteries
1. Open the battery cover of the back of the remote control.
Slide in the direction of the
arrow to remove the
battery cover.
2. Install two AA size(1.5V) batteries. Match the + and - signs on the batteries to the signs on the battery
compartment.
3. Close the battery cover on to the remote control.
Note:
1.Dispose of your batteries in a designated disposal area. Do not throw your batteries into fire.
2.Do not mix battery types or combine used batteries with new ones.
3.Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment.
4.If you do not intend to use the remote control for a long time, remove the batteries.
5.The effective range of remote control is suggested in the figure.
RIGHT
LEFT
VIDEO
30
30
6m
-8-
Using the TV features
Understanding the TV features
Tinted, Bright Black Matrix Picture Tube
181 Channels Selection-All VHF/UHF channels plus up to 125.
PLL Frequency Synthesized Tuning-The latest PLL frequency synthesized electronic tuning system
provides free and easy channel selection, and lets you tune directly to any channel using the channel
number buttons on the remote control.
On-Screen Function Display
Full-Function Remote Control
Sleep Timer
Closed Caption Decoder-You may view specially labelled(cc)TV program, movies, news, prerecorded
tapes, etc. with either a dialogue caption or text display added to the program.
Auto Shut Off Function-If there is no signal input from the antenna terminal and no operation for 15
minutes, the TV will turn itself off .
V-CHIP-Enables parents to prevent their children from watching inappropriate programs on TV.
BTSC/SAP
Watching a TV program
1)Connect the TV to power outlet, the power indicator will display red. Press the power switch or the POWER
button on the remote control to turn on the TV.
2)Select the on-screen display language (See Using the OPTION menu).
3)Auto-search the programs(See Using the PRESET menu).
4)Press CH+ and CH- or the channel number buttons on the remote control to select the channel you wish(See
Changing channels).
5)Adjust the picture quality for a natural looking image(See Adjusting the picture).
6)Press VOL+ and VOL- to adjust the volume. Also, you can adjust it in the AUDIO menu(See Adjusting the
sound).
7)Press the power switch or the POWER button on the remote control to turn off the TV.
Using the OPTION menu
1)Press the MENU button repeatedly until OPTION menu appears as right shown.
2)Press the CH+ or CH- to select the item you want to adjust.
OPTION
Language
Coring
English
Off
C.caption
Game
Off
:
: Adjust
Select
-9-
Using the TV features
Press VOL+ or VOL- to change the on-screen display language among English, French, Spanish and Portuguese.
The item is for decreasing the noise of the background.
Press VOL+ or VOL- to select On or Off.
You have two options with the closed caption feature: captions or text. A caption is a printed version of
the dialogue, narration and/or sound effects of a TV program. Text is information not rated to the
program that appears on half of the TV screen.
Press VOL+ or VOL- to change the item among Off/CC1/CC2/CC3/CC4/TT1/TT2/TT3/TT4.
This is a game preset by the manufacturer in the TV set.
1)Press VOL+ or VOL- to enter the game, then the screen will display as right shown .
2)Press the RECALL button to start the game, then press RECALL three times
7 7 7
Gifts
:
to pitch on the number. And then the system will reward you according to the number.
RECALL : Play
DISPLAY: Exit
3)Press the DISPLAY button to quit the game.
Note: The rules of the game
1)If one of the three numbers is 8, you will get one coin.
2)If two of the three numbers are same, but they are all not 8, you can get two coins.
3)If two of the three numbers are same and they are all 8, you can get three coins.
4)If the three numbers arrange as 123 or 321, you will get four coins.
5)If the three numbers are all same, you can get five coins.
Using the PRESET menu
PRESET
Position
Add/Delete
Antenna
Auto-search
17
Add
Air
1)Press the MENU button repeatedly until the PRESET menu appears as
right shown.
2)Press the CH+ or CH- button to select the item you want to adjust.
:
: Adjust
Select
The item allows the TV to auto-search programs through the whole channels from Air to Cable.
Press VOL+ or VOL- to start it.
-10-
Using the TV features
Note:
1)When the search is finished, the screen will display as left shown below and the TV will automatically turn to the
first channel that has a program. Otherwise the screen will display as right shown below.
2) The PRESET menu will not appear when the TV is in AV status.
3) Press the VOL+ or VOL- to stop the auto-search if you want.
Search finished
Please watch
Nothing searched
Check antenna
Press VOL+ and VOL- or the channel number buttons to select the channel that you wish.
The item allows you to add or delete a channel. If some channel is set to Delete, the channel will be skipped when
you select a channel by pressing CH+ and CH-.
Press VOL+ or VOL- to select Add or Delete.
The item allows you to select the signal receiving method.
Press VOL+ or VOL- to change the item between Air and Cable.
Changing channels
To change the channel, you can
CH
1.Press CH +or CH- on the remote control or
2.Press the channel number buttons(0-9).
on the TV.
1) To select a one-digit channel : Press the 0 button to display 0- and then press a button from 1-9.
2) To select a two-digit channel : Press a button from 1-9 to select the first number, then press a button
from 0-9 again to select the second number. For example, to select channel 28, press the 2 button first ,
2- will appear on the screen, and then press the 8 button.
3) To select a three-digit channel: Press the 1 button for about one second until 1-- appears on the screen, then
press buttons from 0-9 successively to select the other two numbers. For example, to select channel 120,
press the button 1 for one second , 1-- will appear on the screen, then press the button 2 and the button 0
successively.
-11-
Using the TV features
Adjusting the picture
Adjusting the picture quality
1)Press the MENU button, then the PICTURE menu appears as right shown.
2)Press the CH+ or CH- to select the item you want to adjust.
3)Press the VOL+ or VOL- to adjust the level .
PICTURE
Bright
Contrast
Color
Sharp
Tint
80
80
80
80
00
Note: The items in this menu are explained in details as following.
Adjust
:
:
Select
Pressing
Item
VOL-
Darker
Lower
Paler
VOL+
Lighter
Higher
Brightness
Contrast
Deeper
Sharper
Greenish
Color
Sharpness
Tint
Softer
Purplish
Selecting the picture mode
You can select the picture quality instantly among four preset modes and one user-set mode.
Press the P.P button on the remote control repeatedly to select the desired picture quality.
Personal
Standard
Soft
Vivid
Light
Adjusting the sound
1)Press the MENU button repeatedly until AUDIO menu appears as right shown.
2)Press the CH+ or CH- to select the item you want to adjust.
AUDIO
Volume
Balance
50
00
:
: Adjust
Select
Press the VOL+ or VOL- to increase or decrease the volume.
You can adjust the balance if the volume of the left and right speaker is different.
Press VOL+ to increase the volume of the right speaker
Press VOL- to increase the volume of the left speaker
-12-
Using the TV features
Muting the sound
Press MUTE on the remote control to temporarily turn off the sound. While the
sound is off, the screen will display as right shown.
To restore the sound, press MUTE again.
x
Mute
25
Selecting BTSC/SAP broadcasts
You can enjoy watching TV while you listen to high-fidelity stereo sound with the BTSC feature. BTSC can
also transmit a second audio program(SAP) containing a second language or other audio information.
Press the SAP button on the remote control, the TV will execute different operations according to
the different broadcasts that it has received.
Note:
1)If the TV receives Mono broadcasts, press the SAP button repeatedly, the word Mono appears
on the screen .
2)When the TV receives Mono SAP broadcasts, press the SAP button repeatedly, the words Mono and
SAP will alternate to appear on the screen.
3)When the TV receives Stereo broadcasts, press the SAP button repeatedly, the words Mono and
Stereo will alternate to appear on the screen.
4)When the TV receives Stereo SAP broadcasts, press the SAP button repeatedly, the words Mono,
Stereo and SAP will alternate to appear on the screen.
Using the CLOCK menu
CLOCK
Time
On-time
Off-time
Attention
Exchange
Position
1)Press the MENU button repeatedly until the CLOCK menu appears as
shown on the right.
2)Press the CH+ or CH- to select the item you want to adjust.
:
:
:
:
:
:
: Adjust
Select
The item allows you to set the local time on the TV.
Press VOL+ to set hour, the clock counts up one hour for each press of VOL+ button.
Press VOL- to set minute, the clock counts up one minute for each press of VOL- button.
Note: The time you set in this menu is for reference only.
The item allows the TV automatically turns on to a preset channel when preset time comes.
Set this item just like the Time setting.
The item allows the TV automatically to switch to standby mode when the preset time comes.
Set this item just like the Time setting.
-13-
Using the TV features
The item is for reminding you when preset time comes. The screen will display
as right shown. It will disappear when you press any button.
Set this item just like the Time setting.
Attention
The item allows the TV automatically to turn to a channel preset in the Position when the preset time comes.
Set this item just like the Time setting.
The item allows the TV automatically turns to the channel when the preset time in On-time or Exchange comes.
Press VOL+ or VOL- to preset a channel.
Using the V-CHIP menu
V-CHIP enables parents to prevent their children from viewing certain programs or channels.
To use the V-CHIP to block programs by rating
1)Press the V-CHIP button, then the V-CHIP menu appears as shown on the right.
2)Press the CH+ or CH- to select the item you want to set.
V-CHIP MENU
Block
TV Rating
MPAA Rating
Change password
On
:
: Adjust
Select
There is a default password(0000) preset by manufacturer on the TV. If you want to change it, please follow
the steps below.
1)Press VOL+ or VOL-, the screen will display as shown below to ask you to enter the old password.
2) Enter the default password, the TV will ask you to enter a new password.
3) Enter a new password you like, the TV will ask you to enter it again for confirmation.
4)Enter the new password again.
Note: 1)If the two new password enters are same, the screen will display that the password has been changed.
Otherwise the password remains unchanged. You have to retry.
2)You can only use the channel number buttons(0-9) for the password enter.
Please input
old password :
Please input
new password :
Input new
password again :
Password changed
Please remember
-14-
Using the TV features
1)Press VOL+ or VOL-, the screen will display as left shown below to ask you to enter a password.
2)Enter the right password, the Block will alternate between On and Off.
If the password is wrong, the screen will display as right shown below.
Please input
password :
Wrong password
1)Press VOL+ or VOL- and the TV will ask you to enter a password.
2)Enter the right password, the screen will display as left shown below.
3)Press the CH+ or CH- to select the ratings.
4)Press MENU button to block(B) or unblock(U) the selected ratings.
1)Press VOL+ or VOL- and the TV will ask you to enter a password.
2)Enter the right password, the screen will display as right shown below.
3)Press the CH+ or CH- to select the rating.
4)Press MENU button to block(B) or unblock(U) the selected rating.
.
TV-Rating
Rating
MPAA-Rating
FV D
U
L
S
V
Movie
G
PG
Rating
TV-Y
TV-Y7
TV-G
U
U
U
U
U
U
U
U
U
PG-13
R
NC-17
X
TV-PG
TV-14
TV-MA
U
U
U
U
U
U
U
U
U
U
U
U
U
U
Age Based Rating
Age Based Rating
Note:
1) As you block ratings, all ratings higher than the ones you select are blocked as well. For example, if you
choose to block the MPAArating R, the higher ratings, NC-17 and X, are automatically blocked too.
2) You can press VOL+ or VOL- to alternate between TV-Rating menu and MPAA-Rating menu.
About TV Ratings
The TV ratings are divided into two groups: age-based and content-based.
-15-
Using the TV features
Age
Defined as
Contents
Defined as
TV-Y
All children
Fantasy Violence
Suggestive dialogue
Strong language
FV
D
L
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Directed to older children
General audience
Parental Guidance suggested
Parents Strongly cautioned
S
Sexual situations
Violence
V
Mature Audience only
About MPAA Ratings
The Motion Picture Association of America(MPAA) uses a rating system to qualify motion picture content.
Television broadcasters employ a rating system to qualify the content of televison programs as well.
The MPAAand TV ratings work with the V-CHIP feature and allow you to block out programming above
the rating limits you determine.
Rating
G
Defined as
General audience
PG
Parental Guidance suggested
Parents strongly cautioned
PG-13
R
Restricted
No one 17 and under admitted
NC-17
X
Adult audience only
Setting the sleep timer
You can set the TV so it turns off automatically.
To set the sleep timer:
1) Press the SLEEP button on the remote control. The screen will display
as shown on the right.
Sleep
2) Press the SLEEP button repeatedly and the clock will count up 15 minutes
for each press of the SLEEP button(15,30,45....).
The timer can be set up to 120 minutes.
To confirm the sleep timer setting:
Press the SLEEP button and the remaining time will be momentarily displayed.
To cancel the sleep timer:
Press the SLEEP button repeatedly until the display disappears.
-16-
Using the TV features
Note:
1) If you have set the sleep timer, the Off-time (See Using the CLOCK menu) you set will be cleared
automatically.
2) If you have set the On-time (See Using the CLOCK menu), when the preset time comes to turn on the TV,
the sleep timer will be set to 120 minutes automatically. It will be cancelled automatically when you execute
any operation with the TV(This feature is just for nobody being at home, however the TV turns on
automatically).
Displaying the current channel number on screen
Press the DISPLAY button on the remote control, the current channel number will display on the top-right
corner of the screen. Whenever you want to cancel it, press the DISPLAY button again.
Switching between two channels
Press the RECALL button on the remote control to return to the previous channel that you have just viewed.
Press the RECALL button repeatedly, the screen will alternate between the present and previous channels.
Setting the child lock
Press the LOCK button to lock or unlock the TV.
When the TV is locked, the screen will turn to blue background, and nothing can be viewed unless you press
LOCK again to unlock it.
Selecting the signal source
Press the TV/AV button to select TV or AV mode.
Appendix
Cleaning and care
WARNING: TV sets use high voltage. Do not try to remove the cabinet back. Refer servicing to qualified
service technicians.
To clean the TV screen:
1) Unplug the TV to avoid possible shock hazard.
2) Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm
water to clean the TV screen and trim. Do not use too much water because water spills into the cabinet
can cause damage to the TV.
3) Wipe off any excess moisture with a clean dry cloth.
4)Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet.
Caution: Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet.
These chemicals can damage the finish of the cabinet.
-17-
Appendix
Troubleshooting
Before calling a service technician, please check the following table for a possible cause of the problem and
some solutions.
Solution
Problem
Make sure the power cord is plugged in, then press POWER.
The remote control batteries may be dead. Replace the batteries.
TV will not turn on
No picture, no sound
Check the antenna/cable connections.
The sound may be muted. Press VOL+.
The station may have broadcast difficulties. Try another channel.
No sound, picture OK
Poor sound, picture OK
Poor picture, sound OK
Poor reception of broadcast channels
The station may have broadcast difficulties. Try another channel
Check the antenna connections.
The station may have broadcast difficulties. Try another channel.
Adjust the picture from the menu.
The station may have broadcast difficulties. Try another channel.
Check the antenna connections.
If you are using a VCR, make sure the TV/AV button is set correctly.
The channel may be deleted with the Add/Del feature.
Unable to select a certain channel
Multiple images
The station may have broadcast difficulties. Try another channel.
Use a highly directional outdoor antenna.
The station may have broadcast difficulties. Try another channel.
Adjust the TINT and COLOR in the menu.
If you change the direction of the TV while it is turned on, the
picture could suffer from color shading. If so, turn off the TV and
allow it to cool down for several hours before turning it on again.
Poor color or no color
Check to see if the TV/AV mode is properly set.
There may be an obstruction between the remote control and the
remote control sensor.
The remote control does not operate
The remote control batteries may be dead. Replace the batteries.
-18-
Appendix
Specifications
TC14FS68
Model
TYPE 14(370mm diagonal )
NTSC standard
Picture Tube
Television system
Channel coverage
VHF: 2~13
UHF: 14-69
Cable TV: 2~13,A~W, W+1~W+84,
A-5~A-1, 4A
120VAC, 60Hz
Power source
Power consumption
90W
1W+1W
Audio power
Speaker type
1-9/16 4-1/4 inches
2
S-VIDEO INPUT
VIDEO INPUT: RCA connector
AUDIO INPUT: RCA connector
VIDEO OUTPUT: RCA connector
2
4
Video/Audio
terminals
1
2
AUDIO OUTPUT: RCA connector
Width: 15-3/4inches
Height: 14-9/16inches
Depth: 16-1/2inches
Dimensions
Weight
28lbs
Supplied accessories
Remote control
Design and specifications are subject to change without notice.
-19-
Hisense
Color TV
LIMITED WARRANTY
Hisense Corporation warrants this Product(including any accessories)against defects in material or workmanship,
subject to any conditions set fourth below:
1. Limited Warranty
This limited warranty extends to the original consumer purchaser or any person receiving this TV set as a gift from the
original consumer purchaser and to no other purchaser or transferee.
2. Limited(90)Ninety Day Warranty
Labour for a period of 90 days from the date of purchase, if this Product is determined to be defective. Hisense will
repair or replace the Product, at its option, at no charge, or pay the labor charges to any Hisense authorized service
facility. After the Warranty Period, the consumer must pay for all labor charges.
3. Limited(1)Year Warranty
Hisense will supply, at not charge, new or rebuilt replacements in exchange for defective parts for a period one(1)year
(color picture tube is two(2)years). After 90 days from the date of purchase, labor for removal and installation is available
from Hisense authorized service facilities or a Hisense Service Center at your expense.
4. Limited(1)Year Accessories
Parts and labor for all accessories are for one(1)year.
To obtain warranty service you must take the TV or deliver the TV freight prepaid in either its original packaging affording
an equal degree of protection to any authorized Hisense service centre. You are responsible for transportation
charges to and from the Service Center.
The warranty does not cover instruction, installation, set up adjustments or signal reception problems.
The warranty does not cover cosmetic damage due to acts of Nature, accident, misuse, abuse, negligence, commerical
use, or modification of or to any part of the TV. This warranty does not cover the damage due to improper operation or
maintenance, connection to improper voltage supply, or attempted repair by someone other than a facility autorized by
Hisense to service the TV. This warranty does not cover TV's sold AS IS or WITH ALL FAULTS, or consumables. This
warranty is valid only in the United States.
Proof of purchase is the form of a bill or sale or receipted invoice, which is evidence that the unit is within the Warranty
period, must be presented to obtain warranty service.
This warranty is invalid if the factory-applied serial number has been altered or removed from the TV.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER. HISENSE SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPTTO THE EXTENT PROHIBITED
BY APPLICABLELAW. ANY IMPLIED WARRANTY OF MECHANT ABILITY OR FITNESS FOR A PARTICULAR
PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on how
long an implied warranty lasts, so the above limitations or exclusions may not apply to you. In addition, if you enter into
a service contract with the Hisense Corporation within 90 days of the date of sale, the limitation on how long an implied
warranty lasts does not apply. This warranty gives you specific legal rights and you may have other rights which may
vary from state to state.
Hisense has established telephone numbers fro frequently asked questions at your convenience.
To locate the service location or dealer nearest you or for service assistance or resolution of a service problem or for
TV information or operation, call:
Hisense USACorp.
17005 Evergreen Place,Building A
City of Industry,CA91745
1-866-HISENSE(1-866-447-3673)
OR
E-mail to:[email protected]
For an accessory or part not available from your authorized dealer, call:1-866-HISENSE
|