EMERSON HOME ENTERTAINMENT WARRANTY
COLOR TELEVISION
ET1333E (13 inch)
ET1933E (19 inch)
We appreciate your purchase of a Emerson Home Entertainment product. We take pride in the quality of our products and
have manufactured your new Home Entertainment unit to exacting quality standards. We feel confident that in normal use, it
will provide you with satisfactory performance. However, should you experience difficulty, you are protected under the
provisions of this warranty.
Emerson Home Entertainment products are warranted against manufacturing defects in materials and workmanship in normal
use for the following periods from the date of purchase by the original user, and is conditional upon the unit being installed
and used as directed in the instruction manual.
Owner’s
Manual
“EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS
OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A.”
Product
Labour
Parts
Picture Tube
Colour Televisions
Remote Control
B/W Televisions
1 Year
90 Days
90 Days
1 Year
90 Days
1 Year
3 Years
—
1 Year
FEATURES
Emerson’s obligation under this warranty shall be limited to the repair, including all necessary parts and the cost of the labour
connected therewith, or at our option the exchange of any Home Entertainment product which shows evidence of a
manufacturing defect within the warranty period.
● Tinted, Bright Black Matrix Picture Tube
Replacement parts, furnished in connection with this warranty shall be warranted for a period equal to the unexpired portion
of the original equipment warranty.
● 181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.
● PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic tun-
ing system provides free and easy channel selection, and lets you tune directly to any channel
using the channel number buttons (0~9 and +100-key) on the remote control.
● On-Screen Function Display
CUSTOMER OBLIGATIONS
This warranty applies to the product from the original date of purchase at retail. Therefore, the owner must provide a copy of
the original, dated bill of sale. No warranty service will be performed without a bill of sale. Transportation to and from the
service depot is the responsibility of the owner.
● Full-Function Remote Control
● Sleep Timer
WARRANTY EXCLUSIONS
This warranty is extended to Emerson Home Entertainment products purchased and used in Canada. This warranty shall not
apply to appearance or accessory items including but not limited to: antenna, cabinet, cabinet parts, knobs, batteries,
connecting cables. This warranty shall, in addition, not apply to damages due to handling, transportation, unpacking, set-up,
installation, customer adjustments that are covered in the instruction book, repair or replacement of parts supplied by other
than the Emerson authorized service depot, any malfunction or failure caused by or resulting from abnormal environmental
conditions, improper unauthorized service, improper maintenance, modifications or repair by the consumer, abuse, misuse,
neglect, accident, fire, flood, or other Acts of God, and incorrect line voltage. This Home Entertainment product is only
warranted to the original retail purchaser. This warranty becomes void in the event of commercial or rental use. This
warranty becomes void in the event serial numbers are altered, defaced or removed. Emerson reserves the right to make
changes in design or to make additions to or improvements upon this product without incurring any obligation to install the
same on products previously manufactured. The foregoing is in lieu of all other warranties expressed or implied and
Emerson neither assumes nor authorizes any person to assume for it any other obligation or liability in connection with the
sale or service of this product. In no event shall Emerson or its Emerson dealers be liable for special or consequential
damage arising from the use of this product, or for any delay in the performance of this warranty due to cause beyond our
control.
● Closed Caption Decoder- You may view specially labeled (cc) TV programs, movies, news,
prerecorded tapes, etc. with either a dialogue caption or text display added to the program.
● Auto Shut Off Function- If there is no air signal input from the antenna terminal and no
operation for 15 minutes, the TV will turn itself off automatically.
● V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.
PRECAUTION
● Place your TV in a room with adequate ventilation.
● Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.
● Do not place your TV on soft surfaces, such as rugs or blankets.
The purchaser may have other rights under existing provincial or federal laws, and where any terms of this warranty are
prohibited by such laws, they are deemed null and void, but the remainder of the warranty shall remain in effect.
● Leave enough room for air to circulate around the bottom, top and back of the set.
HOW TO OBTAIN SERVICE
Should this product require service, you may obtain specific information on how to obtain service by contacting the Emerson
Dealer from whom this product was purchased, or by contacting us directly:
The serial number of this product may be found on the back of the TV. No others have the same
serial number as yours. You should record the number and other vital information here and retain
this book as a permanent record of your purchase to aid identification in case of theft.
SONIGEM SERVICE
300 Alden Road
Markham, Ontario
L3R 4C1
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
PHONE: (905) 940-5089
FAX: (905) 940-2303
1-800-287-4871
This Owner’s Manual is made of recycled paper.
IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING
AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE
1-800-287-4871.
0EMN02393
Printed in Malaysia
L2203CD / L2303CD * * * * *
ANTENNA/CABLE CONNECTIONS
Bent pin
FCC WARNING- This equipment may generate
or use radio frequency energy. Changes or modi-
fications to this equipment may cause harmful
interference unless the modifications are express-
ly approved in the instruction manual. The user
could lose the authority to operate this equip-
ment if an unauthorized change or modification
is made.
*Some cable TV systems use
scrambled signals and require a
special converter to receive
these channels. Consult your
local cable company.
UHF/VHF Rod
Antenna
Cable
Plug
(Needs to be straightened)
(Supplied with
13” model only)
(Straight pin)
VHF
Antenna
(Not supplied)
Before plugging the UHF/VHF
Rod Antenna (Supplied with 13”
model only) into the ANT(enna).
IN jack, check that the pin is not
bent. If it is bent, straighten the
pin as illustrated, then plug the
pin into the ANT(enna). IN jack.
CATV Box *
or Satellite Box
(Not supplied)
UHF
Antenna
CAUTION: TO PREVENT ELECTRIC
SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
(Not supplied)
OUT
IN
From Cable System
or Satellite Antenna
75-ohm
ANT.IN
MISE EN GARDE:
Coaxial Cable
75-ohm
Coaxial Cable
POUR ÉVITER LES CHOC ÉLECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE
DE LA FICHE DANS LA BORNE CORRE-
SPONDANTE DE LA PRISE ET POUSSER
JUSQU’AU FOND.
ANT. IN
OR
OR
From Cable System
VHF/UHF Combiner
(Not supplied)
VHF/UHF
Combination Antenna
(Not supplied)
Note to CATV system installer:
This reminder is provided to call the CATV system installer's attention to
Article 820-40 of the NEC that provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be connected to the ground-
ing system of the building as close to the point of cable entry as practical.
CLOSED CAPTION
This TV can receive C1 and C2 of Caption and Text.
Notes:
1) When your TV receives a special effects playback signal (i.e., Search, Slow, Still) from a VCR’s
video output channel (CH3 or CH4), your TV may not display the correct caption or text.
2) Captions and texts may not match the TV voice exactly.
3) Interference may cause the closed caption system not to function properly.
4) The caption or text characters will not be displayed while the menu display or function’s dis-
play is shown.
CAPTION MODE
1) Closed Caption Characters can be displayed on the TV screen only when the received
broadcast signal contains Caption Signals.
2) Paint-on mode: Displays input characters on the screen immediately.
Pop-on mode: Once characters are stored in memory, they are displayed all at once.
Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines)
Note: If the CAPTION C1 or C2 is selected but a Closed Caption signal is not included,
characters will not be displayed.
5) If you see this screen :
TEXT MODE
1) Displays the text on the screen by scrolling (max. 7 lines)
2) If the received broadcast signal does not contain the caption or text signal, no change will
occur.
If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To
clear screen, select CAPTION C1, C2 or CAPTION [OFF].
PREPARATION FOR USE
●
●
The TV distinguishes between standard TV channels and cable channels.
When AUTO PRESET CH action is completed, the lowest memorized channel reappears on the
screen.
When you press the CH(annel) ▲ or ▼ button after selecting "AUTO PRESET CH", the tuner
will stop at the memorized channels only.
The TV may recognize TV channels to be CATV channels by the receiving conditions. In this
case, try AUTO PRESET CH action again in the fine receiving conditions.
When AUTO PRESET CH is activated where there is no TV signal input,"NO TV SIGNALS"
will appear on the display after the completion of thechannel scanning.
LANGUAGE SELECTION
If you want to change the language of the on-screen menu, follow the procedure below.
1) Connect the power cord to a standard AC outlet.
●
●
●
2) Press the POWER button to turn on the TV.
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
3) Press the MENU button so that the menu display appears on the TV
screen.
4) Press the CH(annel) ▲ or ▼ button to point to "[ENG]".
[ADD/DELETE FUNCTION]
1) Press the MENU button so that the menu display appears on the TV screen.
5) Select "ENG(lish)", "ESP(añol)" or "FRA(nçais)" by using
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
the VOL(ume) ▲ or ▼ button.
2) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET".
PICTURE
Then, press the VOL(ume) ▲ button.
6) Press the MENU button to exit the menu.
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
3) Press the VOL(ume) ▲ button so that "ADD/DELETE" is selected.
4) Use the CH(annel) ▲ or ▼ button to select the
CHANNEL PRESETTING
channel you wish to put into memory or to erase from memory.
ADD/DELETE
AUTO PRESET CH
Note:You MUST PRESET channels BEFORE using CHANNEL ▲ or▼ button.
Note: The display will return to the screen in about 10 seconds.
Perform "ADD/DELETE" function while this display appears on the
screen.
Press the VOL(ume) ▲ or ▼ button to light up the channel number
in LIGHT BLUE if you wish to add the channel into memory.
Press the VOL(ume) ▲ or ▼ button to light up the channel number
in LIGHT RED if you wish to erase the channel from memory.
To preset a channel or to change a preset channel, follow the procedure below.
1) Press the POWER button to turn on the TV.
●
●
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
2) Press the MENU button so that the menu display appears
on the TV screen.
5) Press the MENU button to exit the menu.
PICTURE
3) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET".
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
Then, press the VOL(ume) ▲ button.
RESUME FUNCTION
If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-
ly when the power resumes.
4) Press the CH(annel) ▲ or ▼ button to point to "AUTO PRESET CH".
Then, press the VOL(ume) ▲ button.
ADD/DELETE
AUTO PRESET CH
The tuner scans and memorizes all active channels in your area.
OPERATIONS
WATCHING A TV PROGRAM
PICTURE ADJUSTMENT
1) Press the POWER button to turn on the TV.
2) Select the desired channel with the CH(annel) ▲ or ▼ button.
3) Adjust the volume to the desired listening level using the VOL(ume) ▲ or ▼ button.
4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the VOL(ume) ▲ button so that "PICTURE" is selected.
3) Select the feature you wish to adjust with the CH(annel) ▲ or ▼ button and adjust it with the
VOL(ume) ▲ or ▼ button.
GAME MODE
Set to the most suitable position for TV
GAME.
●
In the above steps, the picture adjustment
display will disappear from the TV screen
after about 10 seconds unless you press any
buttons, even though you may not be fin-
ished. Press the MENU and VOL(ume) ▲
button so that "PICTURE" is selected. Then,
press the CH(annel) ▲ or ▼ button repeat-
edly until the display returns to the screen.
If you adjust the other Picture control after
you set the Game mode to [ON], the Game
mode is set to [OFF] automatically.
SETTING THE SLEEP TIMER
The sleep timer function enables you to shut off the power without pressing
the POWER button after a desired time period.
1) Press the POWER button to turn on the TV and press the SLEEP button
on the remote control .
2) You may change the sleep time with pressing the SLEEP button on the
remote control repeatedly. The timer is set up to 90 min-
utes, 10 minutes each time the SLEEP button is pushed.
[+] : ON
[-] : OFF
BRIGHT
Adjust until the whitest parts of the picture are
as bright as you prefer.
SLEEP 10
●
[+] : increase brightness
[-] : decrease brightness
To cancel the sleep timer:
Press the SLEEP button repeated-
ly until "SLEEP 0" is displayed.
(The timer display counts up and sleep timer will be dis-
played on the screen when you press the SLEEP button
on the remote control.)
Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the
sleep time will be lost.
CONTRAST
Adjust to increase or decrease contrast.
[+] : increase contrast
[-] : decrease contrast
COLOR
Adjust to be brilliant or pale color.
[+] : be brilliant color
[-] : be pale color
[USING THE GAME BUTTON]
You may also set the Game mode and external
input mode at the same time by pressing the
GAME button on the remote control. “GAME”
appears on the TV screen.
CLOSED CAPTION SELECTION
You may view specially labeled (cc) TV pro-
grams, movies, news, prerecorded tapes, etc.
with either a dialogue caption or text display
added to the program.
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the CH(annel) ▲ or ▼ button to point
to "CAPTION".
3) Press the VOL(ume) ▲ or ▼ button to
select the mode you wish.
●
To exit the Game mode and external input
mode, press the GAME button on the remote
control again.
To cancel the Game mode only, adjust the
picture control. The Game mode will be set to
[OFF] automatically as explained in the pre-
vious section. In this case, “VIDEO”(external
input mode) instead of “GAME” appears on
the TV screen.
TINT
Adjust to obtain natural skin tones.
[+] : greenish tone
[-] : reddish tone
●
4) When done, press the MENU button to exit
the menu.
: Press the VOL(ume) ▲ or ▼ button.
Notes:
●
"+" is achieved by pressing the VOL(ume)
▲ button and "-" by pressing the VOL(ume)
▼ button.
PICTURE
PICTURE
PICTURE
PICTURE
PICTURE
●
When you press the GAME button if the TV is
off, the TV turns on and will be in the Game
mode and external input mode automatically.
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [ C1]
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [ C2]
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [ T1]
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [ T2]
: Press the CH(annel) ▲ or ▼ button.
[-]
OFF
[+]
ON
[-]
[+]
[-]
[+]
[-]
[+]
[-]
[+]
GAME MODE
BRIGHT
CONTRAST
COLOR
TINT
OPERATIONS (Continued)
PICTURE
[TV RATING SET UP]
1) Press the MENU button so that the menu display appears on the TV
V-CHIP SET UP
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
V-CHIP enables parents to prevent their children from watching inappropriate material on TV.
V-CHIP reads the ratings for programming (except for news and sports programs, unedited movies
on premium cable channels, and Emergency Broadcast System signals), then denies access to pro-
gramming if the program's rating meets the limitations you select. In this case, "PROTECTED
PROGRAM by ..." message appears on the TV screen.
screen.
2) Press the CH(annel) ▲ or ▼ button to point to "V-CHIP SET UP".
Then, press the VOL(ume) ▲ button.
3) Press the CH(annel) ▲ or ▼ button to point to "TV RATING".
Then, press the VOL(ume) ▲ button.
4) Press the CH(annel) ▲ or ▼ button to point to your desired item.
Then, press the VOL(ume) ▲ button to select [BLOCK] or [VIEW].
TV RATING
MPAA RATING
To block ratings, follow the steps below.
●
Programming may be rated by the Motion Picture Association of America (MPAA) or according
to the Television Parental Guidelines. In order to block any inappropriate programming, set
your limits in both places (MPAA RATING and TV RATING).
You cannot access the menu when the "PROTECTED PROGRAM by ..." message appears. In
this case, change to the unblocked channel, then press the MENU button.
<Selection>
• TV-Y:
• TV-Y7:
• TV-G:
<Rating Category Explanations>
Appropriate for all children
Appropriate for children seven and older
General Audience
TV-Y
TV-Y7 (
TV-G
[VIEW]
) [VIEW]
[VIEW]
) [VIEW]
) [VIEW]
) [VIEW]
●
TV-PG (
• TV-PG:
• TV-14:
• TV-MA:
Parental Guidance suggested.
Unsuitable for children under 14
Mature audience only
TV-14
(
[MPAA RATING SET UP]
1) Press the MENU button so that the menu display appears on the TV
TV-MA (
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
screen.
●
●
●
When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK]
automatically. Also, the lower rating will turn [VIEW] automatically.
When you turn "TV-Y" to [BLOCK] or [VIEW], the all ratings will turn to [BLOCK] or
[VIEW] automatically.
2) Press the CH(annel) ▲ or ▼ button to point to "V-CHIP SET UP".
Then, press the VOL(ume) ▲ button.
3) Press the CH(annel) ▲ or ▼ button to point to "MPAA RATING".
Then, press the VOL(ume) ▲ button.
4) Press the CH(annel) ▲ or ▼ button to point to your desired item.
Then, press the VOL(ume) ▲ button to select [BLOCK] or [VIEW].
TV RATING
MPAA RATING
When you turn "TV-MA" to [VIEW], the all ratings will turn to [VIEW] automatically.
When you select TV-Y7, TV-PG, TV-14, or TV-MA and you press the VOL(ume) ▲ button, the
sub-ratings will appear on the TV screen.
<Selection>
• G:
• PG:
<Rating Category Explanations>
General Audience
Parental Guidance suggested.
If you select the rating category (example: TV-PG) and turn it [BLOCK] or [VIEW], the sub-rat-
ings (example: V for Violence) will turn [BLOCK] or [VIEW] automatically.
You can set the sub-ratings to [BLOCK] or [VIEW] individually when the
rating category is set to [BLOCK]. To set the sub-ratings individually, follow
G
[VIEW]
[VIEW]
[VIEW]
[BLOCK]
[BLOCK]
[BLOCK]
PG
PG-13
R
NC-17
X
• PG-13:
• R:
• NC-17:
• X:
Unsuitable for children under 13
Restricted; under 17 requires accompanying parent or adult guardian
No one under 17 admitted
Mature audience only
TV-Y7
[BLOCK]
the steps below.
FV
[BLOCK]
●
When you select [TV-Y7]:
●
●
●
When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK]
automatically. Also, the lower rating will turn [VIEW] automatically.
When you turn "G" to [BLOCK] or [VIEW], the all ratings will turn to [BLOCK] or [VIEW]
automatically.
Press the CH(annel) ▲ or ▼ button to select "FV" (Fantasy Violence).
Then, press the VOL(ume) ▲ button to select [BLOCK] or [VIEW].
When you select [TV-PG], [TV-14] or [TV-MA]:
Press the CH(annel) ▲ or ▼ button to select "D"(Suggestive Dialog),
"L"(Coarse Language), "S"(Sexual Situation), or "V"(Violence). Then,
press the VOL(ume) ▲ button to select [BLOCK] or [VIEW].
0: When you select [TV-MA], "D" does not appear on the TV screen.
The sub-ratings which set to [BLOCK] appears next to the rating category
in the TV RATING menu.
TV-PG
[BLOCK]
●
D
L
S
V
[BLOCK]
[BLOCK]
[BLOCK]
[BLOCK]
When you turn "X" to [VIEW], the all ratings will turn to [VIEW] automatically.
5) Press the MENU button to exit the menu.
TV-Y
TV-Y7 (
TV-G
TV-PG (DLSV)[BLOCK]
TV-14 (DLSV)[BLOCK]
TV-MA ( LSV)[BLOCK]
[VIEW]
)[VIEW]
[BLOCK]
●
5) Press the MENU button to exit the menu.
MAINTENANCE
TROUBLESHOOTING GUIDE
Sometimes a performance problem can be easily solved by checking seemingly apparent but often over-
looked possibilities. Before arranging for service, check these items. It could save your time and money.
CABINET CLEANING
PICTURE TUBE CLEANING
●
Wipe the front panel and other exterior sur-
faces of the TV with a soft cloth immersed
in lukewarm water and wrung dry.
Wipe the picture tube of the TV with a soft
cloth. Before cleaning the picture tube, discon-
nect the power cord.
●
Never use a solvent or alcohol. Do not spray
insecticide liquid near the TV. Such chemi-
cals may cause damage and discoloration to
the exposed surfaces.
QUICK SERVICE CHECK LIST
SUPPLIED ACCESSORIES
Remote control unit
POSSIBLE REMEDY
Owner’s Manual
(0EMN02393)
Rod Antenna
Try a new channel, if OK, then possible station trouble.
[13" model only supplied
19" model not supplied]
(0EMN00673 or 0EMN01599)
(N0132UD or N0108UD)
Is TV plugged in?
Power at outlet?
Owner’s
Manual
Batteries ("AA" x 2)
Is TV’s POWER button on?
Is antenna connected to terminal on the back of the set?
If outside antenna is being used, check for broken wire.
Check for local interference.
Turn off with POWER button and then turn it on after about a minute.
Adjust COLOR control.
SPECIFICATIONS
GENERAL SPECIFICATIONS
Adjust CONTRAST & BRIGHT control.
Check batteries in Remote Control.
Move the TV away from the nearby appliances which have Magnetism.
19" model: Turn off using the power button, then turn it on again 30 minutes or so later.
13" model: Unplug the TV power cord, then plug it in again 30 minutes or so later.
OTHER SPECIFICATIONS
Television system:
NTSC-M
TV Standard
Remote control:
Digital encoded
infrared light system
Closed Caption
System:
Operating
temperature:
Closed Caption Problem
Possible Remedy
§15.119/FCC
5°C to 40°C
(41°F~104°F)
Channel coverage
VHF:
My TV is showing captions that are
misspelled.
You are watching a live broadcast and spelling errors made by the
closed captioning production company may pass through uncorrect-
ed. A prerecorded program will not show any misspelled words
because of the normal time available for editing the captions.
2 ~ 13
Power requirements: AC120V, 60Hz
[ 13” model ]
UHF:
14 ~ 69
CATV:
2 ~ 13, A ~ W,
W+1 ~ W+84,
A-5 ~ A-1, 5A
181 channel
frequency synthesized
tuning system
Direct access keyboard,
programmable
scan and up/down
Power consumption
(Maximum):
Picture tube:
Dimensions:
53W
My TV will not show the text in its entirety Captions that are delayed a few seconds behind the actual dialogue
or there is a delay of what is being said.
13”
are common for live broadcasts. Most captioning production compa-
nies can display a dialogue to a maximum of 220 words per minute.
If a dialogue exceeds that rate, selective editing is used to insure that
the captions remain up-to-date with the current TV screen dialogue.
H : 12-3/4"(323mm)
W: 14-1/8"(358mm)
D : 14-4/9"(367mm)
19.0 lbs. (8.5kg)
Tuning System
Channel access:
Weight:
[ 19” model ]
My captions are scrambled with white
boxes on the TV screen.
Interference caused by building, power lines, thunderstorms, etc.
may cause scrambled or incomplete captions to appear.
Power consumption
(Maximum):
72W
Terminals
Antenna input:
Picture tube:
Dimensions:
19”
My program guide listed a TV show as
being closed captioned
but none of the captions were displayed.
Broadcasters may at times use a time compression process to the
actual program so that additional advertising time can be given.
Since the decoder cannot read the compressed information, captions
will be lost.
VHF/UHF/CATV
75 ohm unbalanced
(F-type)
RCA connector x 1
RCA connector x 1
1/8” monaural (3.5mm)
H : 16-3/4"(428mm)
W: 18-3/4"(475mm)
D : 18"
(454mm)
Weight:
37.5 lbs. (17kg)
Video input:
Audio input:
Earphone:
My prerecorded videotape does not show
any captions. The tape box mentions it
being closed captioned.
The videotape was either an illegal copying or the tape duplicating
company accidentally left out the captioning signals during the
copying process.
•Designs and specifications are subject to
change without notice and without our
legal obligation.
•If there is a discrepancy between languages,
the default language will be English.
My TV screen shows a black box on certain You are in the TEXT mode. Select CAPTION mode or CAPTION
channels. [OFF].
ELECTRICAL SPECIFICATIONS
Sound output:
1W, 8 ohm
|