57 cm (22.5") Color Calibration LCD Monitor for Video
Specifications
Panel Size and Type
3D LUT and 10-bit Simultaneous
Display
57 cm (22.5") TFTcolor LCD panel
Viewing Angles (H, V) 170°, 170° (at contrast ratio of 10:1)
A 3D LUT (look-up table) allows for
Brightness
380 cd/m2 (maximum)
100 cd/m2 (recommended1)
720:1 (typical)
previewing how colors will be reproduced
on the final film print. 10-bit simultaneous
display means more than 1 billion colors
can be shown on the screen at once. This is
64 times the numbers of colors supported
by standard 8-bit display, and virtually
eliminates color and grayscale banding.
Contrast
On/Off Response Time 12 ms (typical)
Native Resolution
1920 × 1200
Active Display Size (H × V) 483.8 × 302.4 mm
Viewable Image Size
Pixel Pitch
Gamut Coverage
Diagonal: 570 mm
0.252 × 0.252 mm
sRGB: 97%
Rec709: 97%
EBU: 97%
SMPTE-C: 98%
16-Bit Internal Processing
Adobe RGB: 97%
DCI: 88%
With most LCD monitors, the black level
is usually too bright which leads to
banding and washing out of dark grays.
16-bit internal processing allows the
ColorEdge CG232W to reproduce a high
level of detail in dark areas.
Display Colors
1.07 billion from a palette of 68
billion
12-bits per color
Look-Up Table
Internal Processing
Sceen Uniformity2
Cabinet Color
Dot Clock
16-bits per color
Entire Screen: ΔE≤3
Black
Analog: 162 MHz, Digital: 162 MHz
Analog: 26 – 92 kHz, 23.8 – 86
Hz (non-interlace), Digital: 26 –
78 kH, 23.8 – 61.0 Hz (VGA
Text: 68 – 71 Hz) (non-interlace)
RGB Analog, DVI Standard 1.0,
SD / HD-SDI (Dual Link)
DVI-D × 1, D-sub × 1, BNC × 2
(Single Link × 2 or Dual Link × 1)
SDI : SD / HD-SDI (Loop-through)
BNC × 2 (Single Link × 2 or
Dual Link × 1)
Post-Production and Broadcasting
Monitor for Reference and Editing
Error Rate (%)
Error Rate (%)
Scanning Frequency
(H, V)
2
1
2
1
Internal 16-Bit Processing
Internal 10-Bit Processing
0
0
With the ColorEdge CG232W, studio
professionals can now conduct all of their
work on one monitor, whereas they
previously needed both a master monitor
for reference (playback) and a desktop
monitor for editing. This offers significant
cost savings, while solving the problem of
trying to match color between different
monitors.
-1
-2
-3
-1
-2
-3
Input Signals
Input Terminals
0
128 256 384 512 640 768 896 1,023
0
128 256 384 512 640 768 896 1,023
Tones (0 – 1,023)
Tones (0 – 1,023)
Output Signal
Output Terminals
Hardware Calibration
USB Port / Standard
HDCP Support
Power Requirements
1 up, 2 down / USB 2.0
DVI-D3
The bundled ColorNavigator calibration
software lets you set the target values for
brightness, white point, and gamma.
ColorNavigator works with a measure-
ment device to directly utilize the monitor’s
3D LUT for accurate calibration in less
than five minutes.
AC 100 – 120 V, 200 – 240 V:
50 / 60 Hz
110 W (maximum)
Multiple Input Support
Power Consumption
Power Save Mode
Less than 7 W
Input support
Height Adjustment Range 118 mm
Tilt / Swivel / Pivot
40° Up, 0° Down / 35° Right,
35° Left
includes BNC × 2
D-Sub mini input
(SD-SDI/HD-SDI
× 2 or dual-link
Dimensions
(W × H × D)
Net Weight
With Stand: 567 × 481 – 599 × 255 mm
Without Stand: 567 × 389 × 113 mm
With Stand: 13.4 kg
DVI-D input
Brightness and Color Uniformity
SDI × 1), DVI-D,
and D-Sub for
SDI-2 input
SDI-2 output
Without Stand: 8.8 kg
Auto Brightness Functions Auto Brightness Stabilization
EIZO’s Digital Uniformity Equalizer
function corrects brightness and chroma
uniformity errors to ensure the entire
screen will be practically uniform at each
gray level from 0 to 1,023.
direct connection
Color Modes
Custom, sRGB, EBU, Rec709,
SMPTE-C, DCI, Calibration
SDI-1 input
to broadcast and
SDI-1 output
studio sources as
Supplied Accessories AC power cord, signal cables
(DVI-D – DVI-D, DVI-I – D-Sub
mini 15 pin), USB cable, setup
guide, EIZO LCD Utility Disk
well as desktop
USB upstream
PCs.
USB downstream
(ColorNavigator software, PDF
user's manual), adjustment
certificate, screen cleaner,
Additional Features
Preset Color Modes
• High-quality IPS (in-plane switching)
quick reference, warranty card
Five Years1
panel with 1920 × 1200 native resolu-
The panel’s wide gamut reproduces
broadcast-standard color spaces such as
PAL/SECAM and HDTV. In addition,
preset color modes for Rec. 709, EBU,
SMPTE-C, DCI, and sRGB are available at
the touch of a button.
Warranty
0
tion and 170 viewing angles.
1
The usage time is limited to 30,000 hours or less, and the
warranty period of the LCD panel and backlight is limited to
three years from the date of purchase. The warranty period of
the backlight is warranted only if the monitor is used within the
• A panel display frame rate of 120 Hz
virtually eliminates motion artifacts or
“judder” for smooth video playback.
2
recommended brightness of up to and including 100 cd/m with
a color temperature between 5,000 K – 6,500 K and limited to
three years from the date of purchase subject to the usage time
being less than or equal to 10,000 hours.
Measured at gray level 128 and color temperature of 5000 K.
Display with audio/video devices is not supported.
• Backed by a five-year limited manufacturer’s
1
warranty .
2
3
With current LCD technology, a panel may contain a limited
number of missing or flickering pixels.
|