Dell™ 2007FP Flat Panel Monitor
About Your Monitor
Rotating Your Monitor
Solving Problems
Using Your Adjustable Monitor Stand
Appendix
Setting Up Your Monitor
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make better use of your computer.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.
Information in this document is subject to change without notice.
© 2006 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, Inspiron, Dell Precision, Dimension, OptiPlex, Latitude, PowerEdge, PowerVault, PowerApp, and Dell OpenManage are trademarks of
DellInc; Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation; Adobe is a trademark of Adobe Systems Incorporated, which may be registered in
certain jurisdictions. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product
meets the ENERGY STAR guidelines for energy efficiency.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
Model 2007FP
March 2006
Rev. A03
VESA mounting holes (100mm)
(Behind attached base plate)
Use to mount the monitor.
1
2
3
Connectors label
Indicate the positions and types of connectors.
Refer to this label if you need to contact Dell for
technical support.
Barcode serial number label
Use a security lock with the slot to help secure your
monitor.
4
Security lock slot
5
6
7
Monitor Lock/Release Button
Regulatory rating label
Press to release the stand from the monitor.
List the regulatory approvals.
Dell Soundbar mounting brackets
Attach the optional Dell Soundbar.
Push the monitor down, press the button to unlock
the monitor, and then lift the monitor to the desired
height.
Lock down/release button
8
9
Help organize cables by placing them through the
hole.
Cable management hole
Side View
Right side
Left side
1
USB downstream ports
Bottom View
1
2
3
4
5
6
7
8
AC power cord connector
DVI connector
VGA connector
Composite video connector
S-Video connector
USB upstream port
USB downstream ports
DC power connector for Dell™ Soundbar
Monitor Specifications
General
Model number
2007FP
Flat Panel
Screen type
Active matrix - TFT LCD
Screen dimensions
Preset display area:
Horizontal
20.1 inches (20.1-inch viewable image size)
408 mm (16.1 inches)
306 mm (12.1 inches)
Vertical
Pixel pitch
0.255 mm
Viewing angle
Luminance output
Contrast ratio
Faceplate coating
Backlight
+/- 89° (vertical) typ, +/- 89° (horizontal) typ
300 cd/m ²(typ)
800:1 (typ)
Antiglare with hard-coating 3H
CCFL (6) edgelight system
16ms typical
Response Time
Resolution
Horizontal scan range
30 kHz to 81 kHz (automatic)
Vertical scan range
56 Hz to 76 Hz, exception 1600 x 1200 at 60 Hz only
1600 x 1200 at 60 Hz
Optimal preset resolution
Highest preset resolution
1600 x 1200 at 60 Hz
Video Supported Modes
Video display capabilities (DVI playback)
Video display capabilities (Composite playback)
Video display capabilities (S-Video playback)
480p/576p/720p
NTSC/PAL
NTSC/PAL
Preset Display Modes
Dell™ guarantees image size and centering for all preset modes listed in the following table.
Display Mode
Horizontal Frequency
(kHz)
Vertical Frequency (Hz) Pixel Clock (MHz)
Sync Polarity
(Horizontal/Vertical)
VGA, 720 x 400
31.5
31.5
37.5
37.9
46.9
48.4
60.0
67.5
64.0
80.0
75.0
70.1
59.9
75.0
60.3
75.0
60.0
75.0
75.0
60.0
75.0
60.0
28.3
25.2
-/+
-/-
VGA, 640 x 480
VESA, 640 x 480
VESA, 800 x 600
VESA, 800 x 600
VESA, 1024 x 768
VESA, 1024 x 768
VESA, 1152 x 864
VESA, 1280 x 1024
VESA, 1280 x 1024
VESA, 1600 x 1200
31.5
-/-
40.0
+/+
+/+
-/-
49.5
65.0
78.8
+/+
+/+
+/+
+/+
+/+
108.0
108.0
135.0
162.0
Electrical
Video input signals
Analog RGB, 0.7 Volts +/-5%, 75 ohm input impedance
Digital DVI-D TMDS, 600mV for each differential line, 50 ohm input
impedance
S-video, Y input 1 volt(p-p), C input 0.286 volt(p-p), 75 ohm input
impedance
Composite, 1 volt(p-p), 75 ohm input impedance
Synchronization input signals
separate horizontal and vertical,
3.3V CMOS or 5V TTL level, positive or negative sync.
SOG (Sync on green)
AC input voltage / frequency / current
Inrush current
100 to 240 VAC / 50 or 60 Hz + 3 Hz / 2.0A (Max.)
120V: 40A (Max.)
240V: 80A (Max.)
Physical Characteristics
Signal cable type
D-sub: Detachable, Analog, 15pin, shipped attached to the monitor
DVI-D: Detachable, Digital, 24pin, shipped detached from the
monitor
S-video: Not included with display
Composite: Not included with display
Dimensions (with stand):
Height (fully extended in portrait mode)
547.6 mm (21.6 inches)
367 mm (14.5 inches)
445.3 mm (17.5 inches)
193.50 mm ( 7.6 inches)
Height (compressed/locked in landscape mode)
Width
Depth
Weight
Monitor (Stand and Head)
Monitor Flat panel only (VESA Mode)
Weight with packaging
6.9 Kg (15.2 lb)
5.2 Kg (11.5 lb)
9.6 Kg (21.2 lb)
Environmental
Temperature:
Operating
5° to 35°C (41° to 95°F)
Non-operating
Storage: 0° to 60°C (32° to 140°F)
Shipping: -20° to 60°C(-4° to 140°F)
Humidity:
Operating
10% to 80% (non-condensing)
Non-operating
Storage: 5% to 90% (non-condensing)
Shipping: 5% to 90%(non-condensing)
Altitude:
Operating
3,657.6 m (12,000 ft) max
12,192 m (40,000 ft) max
Non-operating
Thermal dissipation
256.0 BTU/hour (maximum)
187.66 BTU/hour (typical)
Power Management Modes
If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in
use. This is referred to as 'Power Save Mode'*. If activity from keyboard, mouse or other input devices is detected by the computer, the monitor will
automatically "wake up". The following table shows the power consumption and signaling of this automatic power saving feature:
VESA Modes
Horizontal Sync
Active
Vertical Sync
Video
Active
Power Indicator
Green
Power Consumption
75W (maximum)*
Normal
Active
operation
55W (normal)**
Active-off mode Inactive
Switch off
Inactive
-
Blanked
-
Amber
Off
Less than 2 W
-
Less than 1 W (at 230 V)
* With Audio + USB
** Without Audio + USB
This monitor is ENERGY STAR®-compliant as well as TCO '99/ TCO '03 power management compatible.
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
Pin Assignments
VGA Connector
Pin Number
15-pin Side of the Connected Signal Cable
1
2
3
Video-Red
Video-Green
Video-Blue
4
5
6
7
GND
Self-test
GND-R
GND-G
8
GND-B
9
Computer 5V/3.3V
GND-sync
GND
10
11
12
13
14
15
DDC data
H-sync
V-sync
DDC clock
DVI Connector
Pin Number
24-pin Side of the Connected Signal Cable
1
TMDS RX2-
TMDS RX2+
TMDS Ground
Floating
2
3
4
5
Floating
6
DDC Clock
DDC Data
Floating
7
8
9
TMDS RX1-
TMDS RX1+
TMDS Ground
Floating
10
11
12
13
Floating
14
15
16
17
18
19
20
21
22
23
24
+5V / +3.3V power
Self test
Hot Plug Detect
TMDS RX0-
TMDS RX0+
TMDS Ground
Floating
Floating
TMDS Ground
TMDS Clock+
TMDS Clock-
S-video Connector
Pin Number
5-pin Side of the Connected Signal
Cable (Cable not included)
1
2
3
4
5
GND
GND
LUMA
CHROMA
GND
Composite Video Connector
Pin Number
1-pin Side of the Connected Signal Cable (cable not included)
LUMA COMPOSITE CHROMA
1
Universal Serial Bus (USB) Interface
This monitor supports High-Speed Certified USB 2.0 interface.
Data Rate Power Consumption
High speed 480 Mbps
Full speed 12 Mbps
Low speed 1.5 Mbps
2.5W (Max., each port)
2.5W (Max., each port)
2.5W (Max., each port)
USB Upstream Connector
Pin Number
4-pin Side of the connector
1
2
3
4
DMU
VCC
DPU
GND
USB Downstream Connector
Pin Number
4-Pin Side of the Signal Cable
1
2
3
4
VCC
DMD
DPD
GND
USB Ports
l
l
1 upstream - rear
4 downstream - 2 on rear; 2 on left side
NOTE: USB 2.0 capability requires 2.0 capable computer
NOTE: The monitor's USB interface works only when the monitor is on or in power save mode, If you switch the monitor off and then on,
attached peripherals may take a few seconds to resume normal functionality.
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display
Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. If desired, the user
can select different settings, but in most cases monitor installation is automatic.
Caring for Your Monitor
CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.
l
To clean your antistatic screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the
antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.
l
l
l
l
Use a lightly-dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.
If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor.
Handle your monitor with care as darker-colored plastics may scratch and show white scuff marks more than lighter-colored monitor.
To help maintain the best image quality on your monitor, use a dynamically changing screen saver and power off your monitor when not in use.
Appendix
Dell™ 2007FP Flat Panel Monitor
FCC Identification Information
FCC Class B
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer's instruction
manual, may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital
device pursuant to Part 15 of the FCC Rules.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
NOTICE: The FCC regulations provide that changes or modifications not expressly approved by Dell™ Inc. could void your authority to operate this
equipment.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference with radio or television reception, which can be
determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:
l
l
l
l
Reorient the receiving antenna.
Relocate the system with respect to the receiver.
Move the system away from the receiver.
Plug the system into a different outlet so that the system and the receiver are on different branch circuits.
If necessary, consult a representative of Dell™ Inc. or an experienced radio/television technician for additional suggestions.
The following information is provided on the device or devices covered in this document in compliance with the FCC regulations:
l
l
l
Product name: Dell™ 2007FP
Model number: Dell™ 2007FPb
Company name:
Dell Inc.
Worldwide Regulatory Compliance & Environmental Affairs
One Dell Way
Round Rock, Texas 78682 USA
512-338-4400
NOTE: For Further regulatory information, see your Product Information Guide.
CAUTION: Safety Instructions
CAUTION: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock,
electrical hazards, and/or mechanical hazards.
Read and follow these instructions when connecting and using your computer monitor:
l
To help avoid damaging your computer, be sure that the voltage selection switch on the power supply for the computer is set to match the alternating
current (AC) power available at your location:
¡
115 volts (V)/60 hertz (Hz) in most of North and South America and some Far Eastern countries such as Japan, South Korea (also 220 volts (V)/60
hertz (Hz)), and Taiwan.
¡
230 volts (V)/50 hertz (Hz) in most of Europe, the Middle East, and the Far East.
l
Always be sure that your monitor is electrically rated to operate with the AC power available in your location.
NOTE: This monitor does not need or have a voltage selection switch for setting the AC voltage input. It will automatically accept any AC input voltage
according to the ranges defined in the "Electrical Specifications" section in the User's Guide.
l
l
l
l
l
l
Do not store or use the monitor in locations that are exposed to heat, direct sunlight, or extreme cold.
Avoid moving the monitor between locations with large temperature differences.
Do not subject the monitor to severe vibration or high impact conditions. For example, do not place the monitor inside a car trunk.
Do not store or use the monitor in locations exposed to high humidity or dusty environment.
Do not allow water or other liquids to spill on or into the monitor.
Keep flat panel monitor in room temperature conditions. Excessive cold or hot conditions can have an adverse effect on the liquid crystal of the display.
l
l
l
Never insert anything metallic into the monitor openings. Doing so may create the danger of electric shock.
To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should open the monitor case.
Never use your monitor if the power cable has been damaged. Ensure that nothing rests on your computer's cables and that the cables are not located
where they can be stepped on or tripped over.
l
l
Be sure to grasp the plug, not the cable, when disconnecting the monitor from an electric socket.
Openings in the monitor cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Avoid using the
monitor on a bed, sofa, rug, or other soft surface, as doing so may block the ventilation openings in the bottom of the cabinet. If you place the monitor
in a bookcase or an enclosed space, be sure to provide adequate ventilation and air flow.
l
l
Place your monitor in a location with low humidity and minimum dust. Avoid places similar to a damp basement or dusty hallway.
Do not expose the monitor to rain or use it near water (in kitchens, next to swimming pools, etc.). If the monitor accidentally gets wet, unplug it and
contact an authorized dealer immediately. You can clean the monitor with a damp cloth when necessary, being sure to unplug the monitor first.
l
l
l
Place the monitor on a solid surface and treat it carefully. The screen is made of glass and can be damaged if dropped or hit sharply.
Locate your monitor near an easily accessible electric outlet.
If your monitor does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an
authorized dealer or service center.
l
l
Do not attempt to remove the back cover, as you will be exposed to an electrical shock hazard. The back cover should only be removed by qualified
service personnel.
High temperatures can cause problems. Don't use your monitor in direct sunlight, and keep it away from heaters, stoves, fireplaces, and other sources
of heat.
l
l
Unplug the monitor when it is going to be left unused for an extended period of time.
Unplug your monitor from the electric outlet before any service is performed.
l
LAMP(S) INSIDE THIS PRODUCT CONTAIN(S) MERCURY AND MUST BE RECYCLED OR DISPOSED OFF ACCORDING TO LOCAL, STATE OR
FEDERAL LAWS. FOR MORE INFORMATION, GO TO WWW.DELL.COM/HG OR CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT
Contacting Dell
To contact Dell electronically, you can access the following websites:
l
l
support.dell.com (technical support)
For specific web addresses for your country, find the appropriate country section in the table below.
NOTE: Toll-free numbers are for use within the country for which they are listed.
TM
NOTE: In certain countries, support specific to Dell
XPST computers is available at a separate telephone number listed for participating countries.
If you do not see a telephone number listed that is specific for XPS computers, you may contact Dell through the support number listed and your call
will be routed appropriately.
When you need to contact Dell, use the electronic addresses, telephone numbers, and codes provided in the following table. If you need assistance in
determining which codes to use, contact a local or an international operator.
NOTE: The contact information provided was deemed correct at the time that this document went to print and is subject to change.
Country (City)
International Access Code Country Code
City Code
Ar
Department Name or Service Area,
Website and E-Mail Address
Local Num
Toll-Free
Anguilla
E-mail: [email protected]
Technical Support
toll-free: 800-
E-mail: [email protected]
Technical Support
Antigua and Barbuda
Aomen
1-800-
Technical Support (Dell™ DimensionT, Dell InsprionT, Dell
OptiplexT, Dell LatitudeT, and Dell PrecisionT)
Technical Support (servers and storage)
Website: www.dell.com.ar
E-mail: [email protected]
E-mail: [email protected]
Argentina ( Buenos Aires )
E-mail for desktop and portable computers:
International Access Code: 00
E-mail for servers and EMC storage products:
Customer Care
Country Code: 54
toll-free: 0-800-
toll-free: 800-
City Code: 11
Tech Support
Tech Support Services
Sales
toll-free: 0-800-
0-810-
E-mail: [email protected]
Technical Support
Aruba
toll-free:
Australia ( Sydney )
International Access Code: 0011
Country Code: 61
Website: support.ap.dell.com
E-mail:support.ap.dell.com/contactus
General Support
13DEL
City Code: 2
Website: support.euro.dell.com
E-mail: [email protected]
Home/Small Business Sales
0820 24
0820 24
0820 24
0820 24
0820 24
Austria
Home/Small Business Fax
Home/Small Business Customer Care
Preferred Accounts/Corporate Customer Care
Support for XPS
International Access Code: 900
Country Code: 43
City Code: 1
Home/Small Business Support for all other Dell
computers
0820
Preferred Accounts/Corporate Support
Switchboard
0820 24
0820 24
E-mail: [email protected]
Technical Support
Bahamas
Barbados
toll-free: 1-866-
E-mail: [email protected]
Technical Support
1-800-
Website: support.euro.dell.com
Technical Support for XPS
Technical Support for all other Dell computers
Technical Support Fax
02
02
02
Belgium ( Brussels )
International Access Code: 00
Country Code: 32
Customer Care
Corporate Sales
02
02
02
City Code: 2
Fax
Switchboard
E-mail: [email protected]
Technical Support
Bermuda
Bolivia
toll-free 1-877-8
E-mail: [email protected]
General Support
toll-free: 800
Website: www.dell.com/br
Brazil
E-mail: BRmailto:[email protected]
Customer Support and Tech Support
Technical Support Fax
International Access Code: 00
Country Code: 55
City Code: 51
0800
51 2
Customer Care Fax
51 2
0800
Sales
British Virgin Islands
Brunei
General Support
toll-free: 1-866-
604
Technical Support ( Penang , Malaysia )
Customer Care ( Penang , Malaysia )
Transaction Sales ( Penang , Malaysia )
Online Order Status: www.dell.ca/ostatus
AutoTech (automated Hardware and Warranty)
Customer Service (Home Sales/Small Business)
Customer Service (med./large business, government)
Country Code: 673
604
toll-free: 1-800-
toll-free: 1-800-
toll-free: 1-800-
Customer Service (printer, projectors, televisions,
handhelds, digital jukebox, and wireless)
toll-free: 1-800-
toll-free:1-800-
toll-free: 1-800-
1-877-
Canada ( North York , Ontario )
Hardware Warranty Support (Home Sales/Small
Business)
International Access Code: 011
Hardware Warranty Support (med./large bus.,
government)
Hardware Warrantu Support (printers,projectors,
televisions, handhelds,digital jukebox, and wireless)
Sales (Home Sales/Small Business)
Sales (med./large bus., government)
Spare Parts Sales & Extended Service Sales
E-mail: [email protected]
toll-free: 1-800-
toll-free: 1-800-
1 866
Cayman Islands
Technical Support
1-877-261-0242
E-mail: [email protected]
Sales and Customer Support
Technical Support (CTC)
Chile ( Santiago )
Country Code: 56
City Code: 2
toll-free: 1230-
toll-free: 8
Technical Support (ENTEL)
toll-free: 1230-
Technical Support website: support.dell.com.cn
Technical Support E-mail: [email protected]
Customer Care E-mail: [email protected]
Technical Support Fax
592
Technical Support (Dimension and Inspiron)
toll-free: 800
Technical Support (OptiPlexT, LatitudeT, and Dell
PrecisionT)
toll-free: 800
toll-free: 800
toll-free: 800
Technical Support (servers and storage)
Technical Support (projectors, PDAs, switches, routers,
and so on)
Technical Support (printers)
Customer Care
toll-free: 800
toll-free: 800
592
China ( Xiamen )
Country Code: 86
City Code: 592
Customer Care Fax
Home and Small Business
Preferred Accounts Division
toll-free: 800
toll-free: 800
Large Corporate Accounts GCP
toll-free: 800
toll-free: 800
toll-free: 800
Large Corporate Accounts Key Accounts
Large Corporate Accounts North
Large Corporate Accounts North Government and
Education
toll-free: 800
toll-free: 800
toll-free: 800
Large Corporate Accounts East
Large Corporate Accounts East Government and
Education
Large Corporate Accounts Queue Team
Large Corporate Accounts South
Large Corporate Accounts West
Large Corporate Accounts Spare Parts
toll-free: 800
toll-free: 800
toll-free: 800
toll-free: 800
Colombia
E-mail: [email protected]
Technical Support
1-800-9
Costa Rica
E-mail: [email protected]
Technical Support
toll free: 800-
Website: support.euro.dell.com
E-mail: [email protected]
Technical Support
Customer Care
Czech Republic ( Prague )
International Access Code: 00
Country Code: 420
22
22
22
Fax
Technical Fax
22
22
Switchboard
Website: support.euro.dell.com
Technical Support for XPS
Technical Support for all other Dell computers
Customer Care (Relational)
Home/Small Business Customer Care
Switchboard (Relational)
7
7
7
3
3
3
3
3
Denmark ( Copenhagen )
International Access Code: 00
Country Code: 45
Switchboard Fax (Relational)
Switchboard (Home/Small Business)
Switchboard Fax (Home/Small Business)
Dominica
E-mail: [email protected]
General Support
toll-free: 1-866-
E-mail: [email protected]
Dominican Republic
toll free: 1-888-15
toll free: 1-888-
Technical Support
E-mail: [email protected]
Ecuador
General Support (calling from Quito)
General Support (calling from Guayaquil)
toll-free: 999-119 - 877-
toll-free: 1800-999-119 -877-
El Salvador
E-mail: [email protected]
Technical Support (Telephonica)
toll free:
Website: support.euro.dell.com
E-mail: [email protected]
Technical Support
0207
0207
0207
0207
0207
0207
0207
Finland ( Helsinki )
International Access Code: 990
Country Code: 358
City Code: 9
Customer Care
Switchboard
Sales under 500 employees
Fax
Sales over 500 employees
Fax
Website: support.euro.dell.com
Home and Small Business
Technical Support for XPS
Technical Support for all other Dell computers
Customer Care
0825
0825
0825
0825
04 99
0825
0825
04 99
Switchboard
Switchboard (calls from outside of France )
Sales
France ( Paris ) ( Montpellier )
International Access Code: 00
Country Code: 33
Fax
City Codes: (1) (4)
Fax (calls from outside of France )
Corporate
Technical Support
0825
0825
Customer Care
Switchboard
01 55
01 55
01 55
Sales
Fax
Website: support.euro.dell.com
E-mail: [email protected]
Technical Support for XPS
Technical Support for all other Dell computers
Home/Small Business Customer Care
Global Segment Customer Care
Preferred Accounts Customer Care
069 9
069 9
0180-
069 9
069 9
069 9
069 9
069 9
Germany (Frankfurt)
International Access Code: 00
Country Code: 49
City Code: 69
Large Accounts Customer Care
Public Accounts Customer Care
Switchboard
Website: support.euro.dell.com
Technical Support
00800-44
Gold Service Technical Support
Switchboard
00800-44
Greece
International Access Code: 00
Country Code: 30
21
21
21
21
Gold Service Switchboard
Sales
Fax
E-mail: [email protected]
General Support
Grenada
Guatemala
Guyana
toll-free: 1-866-
1-800-
E-mail: [email protected]
General Support
E-mail: [email protected]
General Support
toll-free: 1-877-
Website: support.ap.dell.com
Technical Support E-mail: [email protected]
Technical Support (Dimension and Inspiron)
Technical Support (OptiPlex, Latitude, and Dell Precision)
Technical Support (servers and storage)
00852-2
00852-2
00852-2
Hong Kong
Technical Support (projectors, PDAs, switches, routers,
and so on)
00852-3
International Access Code: 001
Country Code: 852
Customer Care
00852-3
00852-3
00852-3
00852-3
Large Corporate Accounts
Global Customer Programs
Medium Business Division
Home and Small Business Division
00852-2
E-mail: [email protected]
Technical Support
1600 33 8045 and 1600
1600
India
Sales (Large Corporate Accounts)
Sales (Home and Small Business)
Website: support.euro.dell.com
E-mail: [email protected]
Sales
1600
Ireland Sales
01
Dell Outlet
1850
1850
Online Ordering HelpDesk
Customer Care
Home User Customer Care
Small Business Customer Care
Corporate Customer Care
Technical Support
01
01
Ireland (Cherrywood)
International Access Code: 00
Country Code: 353
City Code: 1
1850
Technical Support for XPS
Technical Support for all other Dell computers
General
1850
1850
Fax/Sales Fax
01
01
Switchboard
U.K. Customer Care (dial within U.K. only)
Corporate Customer Care (dail within U.K. only)
U.K. Sales (dial within U.K. only)
Website: support.euro.dell.com
0870
0870
0870
Home and Small Business
Technical Support
Customer Care
Fax
02 5
02 6
02 6
02 6
Italy ( Milan )
International Access Code: 00
Country Code: 39
City Code: 02
Switchboard
Corporate
Technical Support
Customer Care
02 5
02 5
02 5
02
Fax
Switchboard
E-mail: [email protected]
Jamaica
toll free: 1-800-32
toll free: 1-800-
Technical Support (dial from within Jamaica only)
Website: support.jp.dell.com
Technical Support (servers)
toll-free: 0120
81-44-
Technical Support outside of Japan (servers)
Technical Support (Dimension and Inspiron)
toll-free: 0120
Technical Support outside of Japan (Dimension and
Inspiron)
81-44-
toll-free:0120
81-44-
Technical Support (Dell Precision, OptiPlex, and Latitude)
Technical Support outside of Japan (Dell Precision,
OptiPlex, and Latitude)
Technical Support (PDAs, projectors, printers, routers)
toll-free: 0120
81-44-
Japan ( Kawasaki )
International Access Code: 001
Country Code: 81
Technical Support outside of Japan (PDAs, projectors,
printers, routers)
Faxbox Service
044-
044-
044-
044-
044-
City Code: 44
24-Hour Automated Order Status Service
Customer Care
Business Sales Division (up to 400 employees)
Preferred Accounts Division Sales (over 400 employees)
Public Sales (government agencies, educational
institutions, and medical institutions)
044-
Global Segment Japan
Individual User
044-
044-
044-
Switchboard
E-mail: [email protected]
Support
toll-free: 080-
toll-free: 080-
toll-free: 080-
Korea ( Seoul )
International Access Code: 001
Country Code: 82
City Code: 2
Support (Dimension, PDA, Electronics and Accessories)
Sales
Fax
2
2
Switchboard
Customer Technical Support ( Austin , Texas , U.S.A. )
Customer Service ( Austin , Texas , U.S.A. )
512
512
Latin America
Fax (Technical Support and Customer Service) ( Austin ,
Texas , U.S.A. )
512
512
Sales ( Austin , Texas , U.S.A. )
512 728-4600
SalesFax ( Austin , Texas , U.S.A. )
or 512 728-3772
Website: support.euro.dell.com
Support
342
+32 (0)2
26
Luxembourg
Home/Small Business Sales
Corporate Sales
Customer Care
International Access Code: 00
Country Code: 352
+32 (0)2
26
Fax
Macao
Technical Support
toll-free:
34
Customer Service ( Xiamen , China )
29 693 115
Country Code: 853
Transaction Sales ( Xiamen , China )
Website: support.ap.dell.com
Technical Support (Dell Precision, OptiPlex, and Latitude)
toll-free: 1 80
Malaysia ( Penang )
International Access Code: 00
Country Code: 60
Technical Support (Dimension, Inspiron, and Electronics
and Accessories)
toll-free: 1 80
Technical Support (PowerApp, PowerEdge,
PowerConnect, and PowerVault)
toll-free: 180
Customer C are
Transaction Sales
Corporate Sales
toll-free: 1 800 881 306
toll-free: 1 80
City Code: 4
toll-free: 1 80
E-mail: [email protected]
Technical Support (TelMex)
Sales
toll-free: 1-866-
50
Mexico
or 01-800-
International Access Code: 00
001-877-
or 001-877-
50
Country Code: 52
Customer Service
Main
or 01-800-
E-mail: [email protected]
General Support
Montserrat
toll-free: 1-866-
E-mail: [email protected]
General Support
Netherlands Antilles
001-800-
Website: support.euro.dell.com
Technical Support for Inspiron XPS computers only
Technical Support for all other Dell computers
Technical Support Fax
020
020
020
020
020
020
020
020
020
020
020
Netherlands ( Amsterdam )
International Access Code: 00
Country Code: 31
Home/Small Business Customer Care
Relational Customer Care
Home/Small Business Sales
Relational Sales
City Code: 20
Home/Small Business Sales Fax
Relational Sales Fax
Switchboard
Switchboard Fax
New Zealand
Website: support.ap.dell.com
E-mail: support.ap.dell.com/contactus
General Support
International Access Code: 00
0800
Country Code: 64
E-mail: [email protected]
Technical Support
Nicaragua
toll-free: 001-800
Website: support.euro.dell.com
Technical Support for XPS
Technical Support for all other Dell products
Relational Customer Care
Home/Small Business Customer Care
Switchboard
81
6
Norway (Lysaker)
International Access Code: 00
Country Code: 47
6
67
67
Fax Switchboard
E-mail: [email protected]
Technical Support
toll-free: 1-800-
toll-free: 1-800
Panama
Peru
Technical Support (CLARACOM)
E-mail: [email protected]
Technical Support
toll-free: 08
Website: support.euro.dell.com
E-mail: [email protected]
Customer Service Phone
Customer Care
Poland ( Warsaw )
International Access Code: 011
Country Code: 48
5
Sales
Customer Service Fax
Reception Desk Fax
Switchboard
City Code: 22
Website: support.euro.dell.com
Portugal
Technical Support
Customer Care
7
International Access Code: 00
Country Code: 351
800
800 300 410 or 800 300 411 or 800 3
21
Sales
Fax
21
E-mail: [email protected]
Technical Support
Puerto Rico
toll-free: 1-866-
E-mail: [email protected]
Technical Support
St. Kitts and Nevis
toll-free: 1-866-
toll-free: 1-866-
toll-free: 1-866-
E-mail: [email protected]
Technical Support
St. Lucia
E-mail: [email protected]
Technical Support
St. Vincent and the Grenadines
NOTE: The phone numbers in this section should be
called from within Singapore or Malaysia only.
Website: support.ap.dell.com
Technical Support (Dimension, Inspiron, and Electronics
and Accessories)
toll-free: 1800
toll-free: 1800
toll-free: 1800
toll-free: 1800
Singapore ( Singapore )
International Access Code: 005
Country Code: 65
Technical Support (OptiPlex, Latitude, and Dell Precision)
Technical Support (PowerApp, PowerEdge,
PowerConnect, and PowerVault)
Customer Care
Transaction Sales
toll-free: 1 800
Corporate Sales
toll-free: 1 800
Website: support.euro.dell.com
E-mail: [email protected]
Technical Support
Customer Care
Fax
Slovakia ( Prague )
02
5
International Access Code: 00
Country Code: 421
420 22
02
02
02
5
5
5
Tech Fax
Switchboard (Sales)
Website: support.euro.dell.com
E-mail: [email protected]
Gold Queue
South Africa ( Johannesburg )
International Access Code:
09/091
011
Technical Support
Customer Care
Sales
011
011
011
011
011
Country Code: 27
City Code: 11
Fax
Switchboard
Technical Support, Customer Service, and Sales
( Penang , Malaysia )
Southeast Asian and Pacific Countries
604
Website: support.euro.dell.com
Home and Small Business
Technical Support
Customer Care
Sales
902
902
902
902
902
Spain ( Madrid )
International Access Code: 00
Country Code: 34
City Code: 91
Switchboard
Fax
Corporate
Technical Support
Customer Care
Switchboard
902
902
91
Fax
91
Website: support.euro.dell.com
Technical Support for XPS
0771
08 5
08 5
08 5
020
Sweden (Upplands Vasby)
International Access Code: 00
Country Code: 46
Technical Support for all other Dell products
Relational Customer Care
Home/Small Business Customer Care
Employee Purchase Program (EPP) Support
City Code: 8
Technical Support Fax
08 5
08 5
Sales
Website: support.euro.dell.com
E-mail: [email protected]
Technical Support for XPS
0848
Switzerland ( Geneva )
International Access Code: 00
Country Code: 41
Technical Support (Home and Small Business) for all other
Dell products
0844
Technical Support (Corporate)
Customer Care (Home and Small Business)
Customer Care (Corporate)
Fax
0844
0848
0848
022
City Code: 22
Switchboard
022
Website: support.ap.dell.com
E-mail: [email protected]
Technical Support (OptiPlex, Latitude, Inspiron,
Dimension, and Electronics and Accessories)
Taiwan
toll-free: 0080
International Access Code: 002
Country Code: 886
Technical Support (servers and storage)
Customer Care
toll-free: 00801
toll-free: 0080
Transaction Sales
toll-free: 0080
Corporate Sales
toll-free: 0080
Website: support.ap.dell.com
Technical Support (OptiPlex, Latitude, and Dell Precision)
toll-free: 180
toll-free: 180
toll-free: 180
Thailand
Technical Support (PowerApp, PowerEdge,
PowerConnect, and PowerVault)
International Access Code: 001
Country Code: 66
Customer Care
Corporate Sales
Transaction Sales
toll-free: 180
toll-free: 180
E-mail: [email protected]
Technical Support
Trinidad/Tobago
toll-free: 1-888-
E-mail: [email protected]
General Support
Turks and Caicos Islands
toll-free: 1-877-
Website: support.euro.dell.com
E-mail: [email protected]
Customer Care website: support.euro.dell.com/uk/en/ECare/Form/Home.asp
Sales
Home and Small Business Sales
Corporate/Public Sector Sales
Customer Care
0870
01344
Home and Small Business Customer Care
Corporate Customer Care
0870
U.K. ( Bracknell )
01344
International Access Code: 00
Country Code: 44
Preferred Accounts (500-5000 employees) Customer
Care
0870
Global Accounts Customer Care
01344
01344
City Code: 1344
Central Government Customer Care
Local Government & Education Customer Care
Health Customer Care
01344
01344
Technical Support
Technical Support for XPS (Sasi: do we need to change to
XPSTM)
0870
0870
Technical Support (Corporate/Preferred Accounts/PAD
[1000+ employees])
General
Technical Support for all other products
Home and Small Business Fax
0870
0870
E-mail: [email protected]
Technical Support
Uruguay
toll-free: 413-
toll-free: 1-800-
toll-free: 1-800-
Automated Order-Status Service
AutoTech (portable and desktop computers)
Hardware and Warranty Support (Dell TV, Printers, and
Projectors) for Relationship customers
toll-free: 1-800-
Americas Consumer XPS support
toll-free: 1-800-
Consumer (Home and Home office) Support for all other
Dell products
toll-free: 1-800-
Customer Service
toll-free: 1-800-
Employee Purchase Program (EPP) Customers
Financial Services website: www.dellfinancialservices.com
Financial Services (lease/loans)
toll-free: 1-800-
toll-free: 1-877-
Financial Services (Dell Preferred Accounts [DPA])
Business
toll-free: 1-800-
Customer Service and Support
toll-free: 1-800-
toll-free: 1-800-
toll-free: 1-877-
U.S.A. ( Austin , Texas )
International Access Code: 011
Country Code: 1
Employee Purchase Program (EPP) Customers
Support for printers, projectors, PDAs, and MPS players
Public (government, education, and healthcare)
Customer Service and Technical Support
toll-free: 1-800-
toll-free: 1-800-
toll-free: 1-800-
or toll-free: 1-800-
Employee Purchase Program (EPP) Customers
Dell Sales
Dell Outlet Store (Dell refurbished computers)
Software and Peripherals Sales
Spare Parts Sales
toll-free: 1-888-
toll-free: 1-800-
toll-free: 1-800-
toll-free: 1-800-
toll-free: 1-800-
Extended Service and Warranty Sales
Fax
toll-free: 1-87
Dell Services for the Deaf, Hard-of-Hearing, or Speech-
Impaired
(1-877-3
E-mail: [email protected]
Technical Support
U.S. Virgin Islands
Venezuela
toll-free: 1-877-
toll-free: 0800-
E-mail: [email protected]
Technical Support
Rotating Your Monitor
Dell™ 2007FP Flat Panel Monitor
Changing the Rotation of Your Monitor
Before you rotate the monitor, your monitor should be fully vertically extended (Vertical Extension) and fully tilted (Tilt) up to avoid hitting the bottom edge of
the monitor.
NOTE: To take advantage of the "Display Rotation" function (Landscape versus Portrait view) an updated graphics driver is required for your Dell™
Computer not included with this monitor. Please download the graphics driver from support.dell.com and refer to the "download" section for "Video
Drivers" for latest driver updates.
NOTE: When in "Portrait View Mode", you may experience performance degradation in graphic-intensive applications (3D Gaming etc.)
Rotating Your Operating System
After you have rotated your monitor, you need to complete the procedure below to rotate your operating system.
NOTE: If you are using the monitor with a non-Dell computer, you need to go to the graphics driver website or your computer manufacturer website for
information on rotating your operating system.
1. Right-click on the desktop and click Properties.
2. Select the Settings tab and click Advanced.
3. If you have ATI, select the Rotation tab and set the preferred rotation.
If you have nVidia, click the nVidia tab, in the left-hand column select NVRotate, and then select the preferred rotation.
If you have Intel, select the Intel graphics tab, click Graphic Properties, select the Rotation tab, and then set the preferred rotation.
NOTE: If you do not see the rotation option or it is not working correctly, go to support.dell.com and download the latest driver for your graphics card.
1
2
3
4
5
AC power cord connector
DVI connector
VGA connector
Composite video connector
S-Video connector
6
7
8
USB upstream port
USB downstream ports
DC power connector for Dell™ Soundbar
To connect your monitor to the computer perform the following steps/instructions.
l
l
Turn off your computer and disconnect the power cable.
Connect either the white (digital DVI-D) or the blue (analog VGA) display connector cable to the corresponding video port on the back of your
computer. Do not use both cables on the same computer. The only case in which both cables can be used is if they are connected to two different
computers with appropriate video systems. (Graphics are for illustration only. System appearance may vary).
Connect the upstream USB port (cable supplied) to an appropriate USB port on your computer .
Connect USB peripherals to the downstream USB ports (rear or side) on the monitor. (See rear or bottom view for details.)
Plug the power cables for your computer and monitor into a nearby outlet.
l
l
l
l
Turn on the monitor and computer.
If your monitor displays an image, installation is complete. If it does not display an image, see Solving Problems.
Use the cable holder on the monitor stand to neatly organize the cables.
l
NOTE: If your computer does not support the DVI connector, you can leave the cable unconnected or remove it.
NOTE: For USB peripherals already connected to your computer, changing the USB connection to your monitor is not necessary.
Using the Front Panel Buttons
Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls,
an OSD shows their numeric values as they change.
A
Use Input Source Select button to select between four different video signals that may be connected to your monitor.
1. VGA input
2. DVI-D input
3. S- Video input
4. Composite video input
Input Source Select
As you cycle through the inputs you will see the following messages to indicate currently selected input source. It may tak
seconds for the image to appear.
or
or
If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as shown
appear.
or
If either S-Video or Composite input is selected and both cables are not connected or the video source is turned off, the sc
have an image. If any button is pressed (except power button), the monitor displays the following message:
B
The MENU button is used to launch the on-screen display(OSD) and select the OSD Menu. See Accessing the Menu System
OSD Menu / Select
C
Use these buttons for navigating and adjusting the slider-bar(decrease/increase ranges) controls in the OSD.
,D
Down (-) and Up (+)
E
The green LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode.
The Power button turns the monitor on and off.
Power button
(with power light indicator)
Using the OSD
Accessing the Menu System
NOTE: If you change the settings and then either proceed to another menu, or exit the OSD menu, the monitor automatically saves those changes. The
changes are also saved if you change the settings and then wait for the OSD menu to disappear.
1. Push the MENU button to launch the OSD menu and display the main menu.
Main Menu for Analog (VGA) Input
Or
Main Menu for non Analog (non VGA) Input
NOTE: AUTO ADJUST is only available when you are using the analog (VGA) connector.
2. Push the
and
buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the
table for a complete list of all the options available for the monitor.
3. Push the MENU button once to activate the highlighted option.
4. Push
and
button to select the desired parameter.
5. Push MENU to enter the slide bar and then use the
and
buttons, according to the indicators on the menu, to make your changes.
6. Select the "back" option to return to the main menu or "exit" to exit the OSD menu.
Icon
Menu and Submenus
EXIT
Description
Select to exit the main menu.
BRIGHTNESS
& CONTRAST
This menu is to activate Brightness/Contrast adjustment.
Push
to select Back to go back to the main menu.
Back
Brightness Brightness adjusts the luminance of the backlight.
Push the button to increase brightness and push the
button to decrease brightness (min 0 ~ max 100).
Contrast Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.
Push the button to increase contrast and push the button to decrease contrast (min 0 ~ max 100).
The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.
Exit Menu
Push
to exit the OSD main menu.
NOTE: When using DVI source, the contrast adjustment is not available.
AUTO ADJUST
Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display setting
with your particular setup.
NOTE: In most cases, Auto Adjust produces the best image for your configuration.
NOTE: AUTO ADJUST option is only available when you are using the analog (VGA) connector.
INPUT
The INPUT SOURCE menu is to select between different video signals that may be connected to your monitor.
SOURCE
Back
Push
to select Back to go back to the main menu.
VGA
DVI-D
Select VGA input when you are using the analog (VGA) connector. Push
Select DVI-D input when you are using the Digital (DVI) connector. Push
to select the VGA input source.
to select the DVI input source.
S-Video
Select S-Video input when you are using S-Video connector. Push
to select the S-Video input source.
Composite
Scan for Sources
Exit Menu
Select Composite input when you are using composite video connector. Push
to select the composite input source.
Push
Push
button to scan for available input signals.
to exit the OSD main menu.
COLOR
SETTINGS
Color Settings adjusts the color setting mode and color temperature.
There are different color setting sub-menus for VGA/DVI-D and Video input.
Color setting submenu for VGA/DVI-D input
Color setting submenu for Video input
or
Back
Push
to select Back to go back to the main menu.
Color Settings Mode To achieve the different color mode for PC and Mac.
(VGA/DVI-D)
Color Adjustment PC Blue: PC Blue is selected to obtain a bluish tint. This color setting is typically used for text based applications (Spreadsh
Programming, Text Editors etc.).
PC Red: Red Preset is selected to obtain a redder tint. This color setting is typically used for color intensive applications (Ph
Image Editing, Multimedia, Movies etc.).
PC Custom: Use the plus and minus buttons to increase or decrease each of the three colors (R, G, B) independently, in sin
increments, from '0' to '100'.
NOTE: Color temperature is a measure of the 'warmth' of the image colors (red/green/blue). The two available presets
'Red') favor blue and red accordingly. Select each one to see how each range suits your eye....or utilize the 'Custom Co
to customize the color settings to your exact choice.
Color Reset
Exit Menu
Return your monitor color settings to those that were set at the time of manufacture.
Push
to exit the OSD main menu.
IMAGE
There are 3 image modes for different usage.
MODES
Image mode submenu for VGA/DVI-D input
Image mode submenu for Video input
or
NOTE: Image modes are different between the VGA/DVI-D and Video inputs
Back
Push
to select Back to go back to the main menu.
VGA/DVI-D input
Desktop Mode
Mode suitable for desktop applications.
Multimedia Mode
Gaming Mode
Mode for multimedia applications, eg video playback.
Mode suitable for gaming applications.
Video input
Theater Mode
Sports Mode
Nature Mode
Mode suitable for movie playback.
Mode suitable for sports scenes.
Mode suitable for nature scenes.
Exit Menu
Push
to exit the OSD main menu.
DISPLAY
SETTINGS
Back
Push
to select Back to go back to the main menu.
Wide Mode
Adjust the image ratio as 1:1, aspect or full screen.
NOTE: Wide Mode adjustment is not required at optimal preset resolution 1600 x 1200.
When making changes to either the 'Horizontal' or 'Vertical' settings, no changes will occur to the size of the viewing area:
will simply be shifted in response to your selection/change.
H Position
V Position
Use the
and
buttons to adjust image to left/right and up/down. Minimum is '0' (-). Maximum is '100' (+).
Sharpness
Zoom
This feature can make the image look sharper or softer. Use
Use the Zoom function to zoom in to specific area of interest.
or
to adjust the sharpness from '0' to '100' .
Using the
and
keys to zoom in and out.
Horizontal Pan
Vertical Pan
When using the zoom function.
Use the and buttons to adjust image to left/right and up/down. Minimum is '0' (-). Maximum is '100' (+).
Pixel Clock
Phase
The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. These settings are accessed t
main OSD menu, by selecting 'Image Settings'.
Use the
and
buttons to adjust for best image quality.
If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use
(fine), again.
NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.
To turn on or off Audio Power during Power Save mode.
All the settings related to this monitor.
Audio Option
Display Info
Reset the image to the original factory setting.
Display Reset
Exit Menu
Push
to exit the OSD main menu.
MENU
SETTINGS
Back
Push
to select Back to go back to the main menu.
Language
Language option to set the OSD display to one of five languages (English, Espanol, Francais, Deutsch, Japanese).
Menu Horizontal Position
Menu Vertical Position
and
and
buttons move OSD to the left and right.
buttons move OSD up and down.
OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button.
Use the and buttons to adjust the slider in 5 second increments, from 5 to 60 seconds.
Menu Timer
This function is used to adjust the OSD background from opaque to transparent.
Transparency
Menu Rotation
Menu Lock
Rotates the OSD by 90 degrees counter-clockwise. Your can adjust according to your Display Rotation.
Controls user access to adjustments. When 'Yes' (+) is selected, no user adjustments are allowed. All buttons are locked e
menu
button.
NOTE: When the OSD is locked, pressing the menu button will take the user directly to the OSD settings menu, with 'O
pre-selected on entry. Select No(-) to unlock and allow user access to all applicable settings.
Reset all OSD settings to the factory preset values.
Factory Reset
DCC/CI
DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) to be a
via software on your PC. You can disable this feature by selecting "Disable".
Enable this feature for best user experience and optimum performance of your monitor.
Push
to exit the OSD main menu.
Exit Menu
PIP
This function brings up a window displaying image from another input source.
SETTINGS
PIP submenu when PIP OFF (main source is VGA/DVI-D input)
PIP submenu when PIP OFF (main source is
input)
or
PIP submenu when PIP ON (main source is VGA/DVI-D input)
PIP submenu when PIP ON (main source is V
input)
Back
Mode
When selected PIP
PIP Source
PIP Position
PIP Size
or
NOTE: When using DVI source, the contrast adjustment i
available.
PIP Contrast
Push
to select Back to go back to the main menu.
There is one mode: PIP (Picture in Picture)
Use and to browse and to select "Off" or "PIP".
When PIP on, choose "SWAP" to switch the main-screen and sub-screen in PIP mode.
PIP Hue/Tint
Select an input signal for PIP. (VGA/DVI/S-Video/Composite)
Use
and
to browse and
to select.
to select.
to select.
PIP Saturation
Select PIP window position.
Use and to browse and
Select PIP window size.
Use and to browse and
Exit Menu
Adjust the contrast level of the picture in PIP Mode.
reduce the contrast
increases the contrast
This function shifts the color of PIP image to green or purple. This is used to adjust for desired flesh tone color.
shifts image color towards green
shifts image color towards purple
Adjust the color saturation of PIP image.
makes the image look more monochrome
makes the image look more colorful
Push
to exit the OSD main menu.
OSD Warning Messages
When the monitor does not support a particular resolution mode you will see the following
message:
This means that the monitor cannot synchronize with the signal that it is receiving from the
Recommended mode is 1600 X 1200 @ 60Hz.
You will see the following message before the DDC/CI function is disabled.
When monitor get into Power Save mode, one of the following messages will appear
depending upon the selected input.
Activate the computer and wake up the monitor to gain access to the OSD
If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as shown below will appear.
or
When the monitor does not sense the selected video input, one of the following messages will appear depending upon the selected input as long as you press
any button other than power button.
VGA / DVI-D input
Video Input
or
Occasionally, no warning message appears, but the screen is blank: this could also indicate that the monitor is not synchronizing with the computer or the
monitor is in a power save mode.
In PIP mode, when the monitor does not sense the selected second signal input, one of the following messages will appear depending upon the selected
input as long as the OSD screen is closed.
1. VGA
2. DVI-D
3. S-Video
4. Composite
or
or
or
NOTE: When the cable is connected back to the input of the monitor, any active PIP window will disappear. Please enter PIP submenu to bring back the PI
Setting the Optimal Resolution
1. Right-click on the desktop and select Properties.
2. Select the Settings tab.
3. Set the screen resolution to 1600 x 1200.
4. Click OK.
If you do not see 1600 x 1200 as an option, you may need to update your graphics driver. Depending on your computer, complete one of the following
procedures.
If you have a Dell™ desktop or portable computer:
¡
Go to support.dell.com, enter your service tag, and download the latest driver for your graphics card.
If you are using a non-Dell™ computer (portable or desktop):
¡
¡
Go to the support site for your computer and download the latest graphic drivers.
Go to your graphics card website and download the latest graphic drivers.
Using the Dell™ Soundbar (Optional)
1. Attach mechanism
2. Headphone connectors
3. Power indicator
4. Power/Volume control
Soundbar Attachment to the Monitor
NOTE: Soundbar Power Connector - 12V DC output is for optional Dell™ Soundbar only.
NOTICE: DO NOT USE WITH ANY DEVICE OTHER THAN DELL Soundbar.
1. Working from the rear of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom rear of the monitor.
2. Slide the Soundbar to the left until it snaps into place.
3. Connect the Soundbar with the DC power connector.
4. Insert the mini stereo plug from the rear of the Soundbar into the computer's audio output jack.
Solving Problems
Dell™ 2007FP Flat Panel Monitor
Monitor Specific Troubleshooting
Self-Test Feature Check
Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly
connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:
1. Turn off both your computer and the monitor.
2. Unplug the video cable from the back of the computer. To ensure proper Self-Test operation, remove both Digital (white connector) and the Analog (blue
connector) cables from the back of computer.
3. Turn on the monitor.
The floating dialog box should appear on-screen (against a black background) if the monitor cannot sense a video signal and is working correctly.
While in self-test mode, the power LED remains green. Also, depending upon the selected input, one of the dialogs shown below will continuously
scroll through the screen.
or
4. This box also appears during normal system operation if the video cable becomes disconnected or damaged.
5. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.
If your monitor screen remains blank after you use the previous procedure, check your video controller and computer system, because your monitor is
functioning properly.
NOTE: Self test feature check is not available for S-Video and Composite video modes.
Common Problems
The following table contains general information about common monitor problems you might encounter.
COMMON
SYMPTOMS
WHAT YOU
EXPERIENCE
POSSIBLE SOLUTIONS
No Video/ Power LED
off
No picture
l
l
l
Check connection integrity at both ends of the video cable
Electric outlet verification
Ensure power button depressed fully
No Video/ Power LED
on
No picture or no
brightness
l
l
l
Increase brightness & contrast controls via OSD
Perform monitor self-test feature check
Check for bent or broken pins
Poor Focus
Picture is fuzzy,
blurry or
ghosting
l
l
l
l
l
Auto Adjust via OSD
Adjust Phase and Pixel Clock controls via OSD
Eliminate video extension cables
Perform monitor reset
Lower video resolution or increase font size
Shaky/Jittery Video
Wavy picture or
fine movement
l
l
l
l
l
Auto Adjust via OSD
Adjust Phase and Pixel Clock controls via OSD
Perform monitor reset
Check environmental factors
Relocate and test in another room
Missing Pixels
LCD screen has
spots
l
l
Cycle power on-off
These are pixels that are permanently off and is a natural defect that occurs in LCD technology
Stuck-on Pixels
Brightness Problems
LCD screen has
bright spots
l
l
Cycle power on-off
These are pixels that are permanently on and is a natural defect that occurs in LCD technology
Picture too dim
or too bright
l
l
l
Perform monitor reset on "Factory Reset"
Auto Adjust via OSD
Adjust brightness & contrast controls via OSD
NOTE: When using '2: DVI-D', the contrast adjustment is not available.
Geometric Distortion
Screen not
centered
correctly
l
Perform monitor reset on "Display Reset"
Auto Adjust via OSD
Adjust brightness & contrast controls via OSD
Ensure monitor is in proper video mode
l
l
l
NOTE: When using '2: DVI-D', the positioning adjustments are not available.
Horizontal/Vertical
Lines
Screen has one
or more lines
l
Perform monitor reset on "Display Reset"
Auto Adjust via OSD
Adjust Phase and Pixel Clock controls via OSD
Perform monitor self-test feature check and determine if these lines are also in self-test mode
Check for bent or broken pins
l
l
l
l
NOTE: When using '2: DVI-D', the Pixel Clock and Phase adjustments are not available.
Sync Problems
LCD Scratched
Screen is
scrambled or
appears torn
l
Perform monitor reset on "Display Reset"
Auto Adjust via OSD
Adjust Phase and Pixel Clock controls via OSD
Perform monitor self-test feature check to determine if scrambled screen appears in self-test mode
Check for bent or broken pins
l
l
l
l
l
Boot up in the "safe mode"
Screen has
scratches or
smudges
l
l
Turn monitor off and clean the screen
Safety Related Issues Visible signs of
smoke or sparks
l
l
Do not perform any troubleshooting steps
Monitor needs to be replaced
Intermittent Problems Monitor
malfunctions on
l
l
l
l
Ensure monitor is in proper video mode
Ensure video cable connection to computer and to the flat panel is secure
Perform monitor reset on "Factory Reset"
& off
Perform monitor self-test feature check to determine if the intermittent problem occurs in self-test mode
Missing Color
Wrong Color
Picture missing
color
l
l
l
Perform monitor self-test feature check
Check connection integrity at both end of the video cable
Check for bent or broken pins
Picture color not
good
l
l
Change the color to "PC Custom Color" or "MAC Custom Color"
Adjust R/G/B value of "PC Custom Color" or "MAC Custom Color"
Image Retention from Faint Shadow
a static image left on from the static
the monitor for a long image displayed
l
l
Use the Power Management feature to turn off the monitor at all times when not in use
Alternatively, use a dynamically changing screensaver
period of time
appears on the
screen
Video Problems
COMMON SYMPTOMS
WHAT YOU EXPERIENCE
POSSIBLE SOLUTIONS
Check Video Input Selection
No Video
No signal indicator is displayed
l
l
¡
Composite: Yellow colored RCA jack
S-Video: Typically a round 4 pin jack
¡
Low Quality DVD
playback
Picture not crisp and some color
distortion
Check DVD connection
¡
Composite gives good picture
S-Video gives better picture
¡
Product Specific Problems
SPECIFIC SYMPTOMS
WHAT YOU EXPERIENCE
POSSIBLE SOLUTIONS
Screen image is too small
Image is centered on screen, but does not fill entire
viewing area
l
Perform monitor reset on "Factory Reset"
Cannot adjust the monitor with
the buttons on the front panel
OSD does not appear on the screen
l
Turn the monitor off and unplug the power
cord and then plug back and power on
The monitor will not go into
power saving mode.
No picture, the LED light is green. When press "+",
"-" or "Menu" key, the message " No S-Video input
signal " or " No Composite input signal " will
appear.
l
l
Move mouse or hit any key on the
keyboard on the computer or activate
video player, then access the OSD to set
Audio to " off " state.
No Input Signal when user
controls pressed
No picture, the LED light is green. When press "+",
"-" or "Menu" key, the message " No S-Video input
signal " or " No Composite input signal " will
appear.
Check the signal source Make sure the
Computer is not in power saving by moving
mouse or pressing any key on the
keyboard.
l
l
l
Check to make sure Video Source to S-
Video, Composite or Component is
powered and playing video media.
Check whether the signal cable is plugged
in and seated properly. Re-plug the signal
cable if necessary.
Re-boot the computer or video player.
The monitor will not fill the entire The picture can't fill the height or width of the
screen. screen.
l
Due to the non-standard formats of DVDs,
the monitor may not show the full screen
pictures.
Universal Serial Bus (USB) Specific Problems
SPECIFIC SYMPTOMS
WHAT YOU EXPERIENCE
POSSIBLE SOLUTIONS
USB interface is not working
USB peripherals are not working
l
l
l
l
l
Check that your monitor is powered ON.
Reconnect the upstream cable to your computer.
Reconnect the USB peripherals (downstream connector).
Switch off and then turn on the monitor again.
Reboot the computer.
High Speed USB 2.0 interface is High Speed USB 2.0 peripherals working slowly or
slow. not at all.
l
l
l
l
l
Check that your computer is USB 2.0 capable.
Verify USB 2.0 source on your computer.
Reconnect the upstream cable to your computer.
Reconnect the USB peripherals (downstream connector).
Reboot the computer.
Dell™ Soundbar (Optional) Troubleshooting
COMMON
WHAT YOU EXPERIENCE
POSSIBLE SOLUTIONS
SYMPTOMS
No Sound
No power to Soundbar - the
power indicator is off.
(built-in DC power supply. i.e.
2007FP )
l
Turn the Power/Volume knob on the Soundbar clockwise to the middle position; check if the
power indicator (green LED) on the front of the Soundbar is illuminated.
Confirm that the power cable from the Soundbar is plugged into the monitor.
Confirm that the monitor has power.
problem.
l
l
l
No Sound
Soundbar has power - power
indicator is on.
l
l
l
l
l
l
Plug the audio line-in cable into the computer's audio out jack.
Set all Windows volume controls to their maximum.
Play some audio content on the computer (i.e. audio CD, or MP3).
Turn the Power/Volume knob on the Soundbar clockwise to a higher volume setting.
Clean and reseat the audio line-in plug.
Test the Soundbar using another audio source (i.e. portable CD player).
Distorted Sound
Computer's sound card is used
as the audio source.
l
l
l
l
Clear any obstructions between the Soundbar and the user.
Confirm that the audio line-in plug is completely inserted into the jack of the sound card.
Set all Windows volume controls to their midpoints.
Decrease the volume of the audio application.
l
l
l
l
Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume setting.
Clean and reseat the audio line-in plug.
Troubleshoot the computer's sound card.
Test the Soundbar using another audio source (i.e. portable CD player).
Distorted Sound
Other audio source is used.
l
l
l
l
l
Clear any obstructions between the Soundbar and the user.
Confirm that the audio line-in plug is completely inserted into the jack of the audio source.
Decrease the volume of the audio source.
Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume setting.
Clean and reseat the audio line-in plug.
Unbalanced Sound
Output
Sound from only one side of
Soundbar
l
l
Clear any obstructions between the Soundbar and the user.
Confirm that the audio line-in plug is completely inserted into the jack of the sound card or
audio source.
l
l
l
l
Set all Windows audio balance controls (L-R) to their midpoints.
Clean and reseat the audio line-in plug.
Troubleshoot the computer's sound card.
Test the Soundbar using another audio source (i.e. portable CD player).
Low Volume
Volume is too low.
l
l
l
l
l
Clear any obstructions between the Soundbar and the user.
Turn the Power/Volume knob on the Soundbar clockwise to the maximum volume setting.
Set all Windows volume controls to their maximum.
Increase the volume of the audio application.
Test the Soundbar using another audio source (i.e. portable CD player).
Using Your Adjustable Monitor Stand
Dell™ 2007FP Flat Panel Monitor
Attaching the Stand
1. Place the stand on a flat surface.
2. Fit the groove on the back of the monitor onto the 2 tabs of upper stand.
3. Lower the monitor so that the monitor mounting area snaps on or locks to stand.
Organizing Your Cables
After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the Cable
management hole to neatly organize all cables as shown above.
Using the Tilt, Swivel and Vertical Extension
Tilt/Swivel
With the built-in pedestal, you can tilt and/or swivel the monitor for the most comfortable viewing angle.
NOTE: Stand is detached and extended when the monitor is shipped from the factory.
Vertical Extension
Stand extends vertically up to 130mm via the Lock down / release button.
NOTE: If locked in the down position, press the Lock down / release button on the bottom rear of stand. Lift the front panel up and extend the stand to
the desired height.
NOTICE: Before relocating or moving the monitor to a different location, make sure that the stand is LOCKED DOWN. To lock it down, lower the height
of the panel until it clicks and is locked into place.
Removing the Stand
After placing the monitor panel on a soft cloth or cushion, press and hold the Monitor Lock / Release Button, and then remove the stand.
NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a clean surface.
|
