Colour Television
Instruction Manual
MODEL NO. : DWP-28W2D, DWP-28W2KD, DWP-28W2GBD
DWP-28W2FD, DWP-28W2SD
DWP-28W2, DWP-28W2K, DWP-28W2GB
DWP-28W2F, DWP-28W2S
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
CONTENT
Important safeguards...............................................3
Before Powering up..................................................4
Identity of features on local and remote control.......5
Connecting external equipment...............................7
Daily use..................................................................9
Menu........................................................................11
Teletext....................................................................19
2
IMPORTANT SAFEGUARDS
WATER AND MOISTURE
Never install the set in the following places: In a wet basement,
bathroom. Do not place any container with liquid on the set.
HEAT
Never place the set near heat sources.
VENTILATION
Do not cover the air vents in the cabinet and never place
the set in a confined space such as bookcase or built-in furniture
unless proper ventilation is provided.
Leave a minimum 10 cm gap all around the unit.
OBJECT ENTRY
Do not insert foreign objects, such as needles
and coins, in the air vents.
LIGHTNING STRIKING
You should disconnect the set from the mains
and the aerial system during thunderstorms.
CLEANING
Unplug the set from the mains during cleaning.
AFTER MOVING THE SET
If the set is moved in a different direction, the MAIN POWER button must
be switched off for at least 15 minutes in order to take out colour patches
on the screen.
3
BEFORE POWERING UP
INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT
Insert the batteries (two 1,5V, type AAA)
MADE IN KOREA
Batteries
MAINS CONNECTION
Plug the mains cable into the power socket
with 240v / 50Hz AC.
AERIAL CONNECTION
When using an outdoor aerial, it is usually
connected to the set by means of 75 ohm
lead, terminated with a coaxial plug.
SWITCHING ON AND OFF
Switching on
Switch the set on with the MAIN POWER button, ( ON/OFF ),
and then PR UP or DOWN button on the front of the set.
Or POWER button or the UP/DOWN button
or one of the NUMBER buttons on the remote control unit.
Switching off
Press POWER button, ( ), on the remote control unit
to return the set to its stand by mode.
If you don’t use the set for an extended period of time,
turn it off with the MAIN POWER button on the set.
1
4
7
2
5
8
0
3
6
NORM
PR
4
DENTITY OF FEATURES ON LOCAL AND REMOTE CONTROL
LOCAL CONTROL
Front
PR
PROGRAMME
DOWN/UP
BUTTONS
VOLUME
DOWN/UP
BUTTONS
TV / AV
BUTTON
ON/OFF
VIDEO
L AUDIO R
VIDEO
INPUT
AUDIO
INPUT
HEAD
PHONE
MAIN
POWER
BUTTON
REMOTE
SENSOR
STAND-BY
INDICATOR
Back
AERIAL TERMINAL
AV1
AV2
SCART SOCKET1
SCART SOCKET2
5
REMOTE CONTROL UNIT
TV mode
TELETEXT mode
1
2
1
2
3
POWER
1
2
3
4
5
6
7
8
9
POWER
NUMBER 0-9
INDEX
1
4
2
5
3
6
NUMBER 0-9
NORMAL / OK
4 TV / AV
MIX
9
7
8
0
5 PR UP (CURSOR UP)
PAGE UP
SUBPAGE
MENU
NORMAL/OK
3
5
4
6
7
8
9
VOLUME UP (CURSOR RIGHT)
MENU
PR
PR DOWN (CURSOR DOWN)
VOLUME DOWN (CURSOR LEFT)
PAGE DOWN
HOLD
MENU
6
10 MUTE
10 MUTE
9
8
11 RECALL
11 REVEAL
12 SIZE
7
12 SLEEP
10
13 not used
13 CANCEL
14 GREEN KEY
15 RED KEY
16 TEXT / TV
17 YELLOW KEY
18 CYAN KEY
PR
SLEEP
RECALL
?
14 MOVE (Edit mode only)
11
13
12
15
/
(Smart Sound Change)
SKIP
R
MOVE/
G
15 SKIP (Edit mode only)
16 TV / TEXT
DELETE/ZOOM MODE
16
18
17
14
C
Y
R-40A13
17 DELETE (Edit mode only)/ZOOM
18 MODE (Sound Mode Change)
6
CONNECTING THE EXTERNAL EQUIPMENT
TV and AV
Use the TV / AV button (
) on the remote control unit or on the front of the set to select one of the
three options. Whenever the TV / AV button (
) is pressed, the on-screen display will be
TV
changed as shown: AV1
AV2
S-VHS
SCART JACK 2 (AV2) :
This is used to connect a VCR,
a Camcoder or a S-VHS VCR .
You can also receive the S-VHS
signal with SCART JACK2 by selecting
SCART JACK 1 (AV1) :
This is used to connect a VCR,
a PERI-TV decoder,a Camcorder or a video
game console . In most cases, the set changes
automatically to AV when the VCR connected is
in display mode . If not, press the TV AV button (
on the remote control unit or on the front of the set .
You must turn the external equipment off or press
the TV / AV button to return to the TV mode .
S-VHS mode with AV button (
) .
)
AV1
VCR
7
HEADPHONE JACK
Insert the headphone plug (3,5 mm)
into the headphone socket.
The sound from the speaker will be cut off.
VIDEO GAME
OR
CAMCORDER
FRONT AV JACK
Connect the AV (Audio/Video) socket with an appropriate
cable to the corresponding socket of the external equipment .
Select AV mode by pressing the TV / AV button.
Press the TV / AV button to return to the TV mode .
NOTE : If two pieces of equipment are connected, one to the front AV JACK and
a second to the SCART JACK 2, you can play only one apparatus, the
second one must be switched off.
8
DAILY USE
1
2
Direct selection
Up/Down moves
Use PR UP/DOWN buttons on the
remote control unit or on the front of the set.
Use remote control NUMBER buttons.
For two digit programme numbers,
press the button for the second digit
within 2.5 seconds.
PR
MENU
PR
3
Mono forcing
If you are unable to get good sound on a channel due to a poor stereo broadcasting signal,
you can change from stereo to mono transmission by pressing the remote control MODE button.
Then the programme status concerning this programme indicates "Mono" (in red colour)
12
For other adjustments (bass, treble, balance and sound effect) see sound menu page
.
You can choose between three picture settings,
using repeatedly the remote control NORMAL button :
The sleep function will switch
the television to stand-by
after a set period of time.
- Normal I (standard hard picture)
- Normal II (standard soft picture)
- Favourite (you can adjust picture setting to your own
Preference, using the Picture menu)
Pressing the remote control SLEEP
button repeatedely, you can enter
one of the following settings :
OFF >30 min > 60 min >
For other adjustments : Brightness, contrast, colour,
sharpness, see Picture menu. (page
)
11
90 min >120 min >OFF
Whenever the "ZOOM" button is pressed, the screen will be changed as shown;
Auto->16:9->Zoom->Panorama->Auto...
9
1
2
Volume adjustment
Mute
Turn the sound off by pressing the remote control
Use VOLUME UP/DOWN buttons
on the remote control unit
MUTE (
Then the logo (
) button.
) is displayed on the screen.
or on the front of the set.
PR
Sound returns by pressing
the same button once more.
MENU
PR
Programme number
Channel name
01 BBC 1
Sound transmission mode :
Displayed in red color
only if forced to mono
by MODE button
NICAM STEREO
The remaining time before
TV turn-off is displayed on
programme status.
Clock
11:11
SLEEP 60
Remaining time (minutes)
before Tv set turns off.
Only when sleep function is activated
Note that.
Language selection, Child lock, Clock setting and wake time setting
are available in features menu. (see page
,
)
13 14
10
MENUS
All menus are removed within 25 seconds if you don’t press any button.
1
Direct selection
- Press remote control MENU button
to display main menu.
Then, you have the choice
between several sub-menus .
PI CTURE
SOUND
PR
FEATURES
I NSTALL
MENU
PR
1
2
- Select the function you want
to change using
- Adjust the function using :
Remote control CURSORS LEFT or RIGHT button.
remote control CURSORS UP
or DOWN buttons.
PR
PR
MENU
MENU
PR
PR
NORMAL/OK
- Press the OK button to enter
the appropriate sub menu.
PI CTURE
BRI GHT.
CONTRAST
COLOUR
SHARP.
- Select and adjust the level of each function :
"bright", "contrast", "colour" and "sharpness".
- Selected values are automatically
stored in favourite mode.
11
2
PR
If you want to cancel immediately the main menu,
press MENU button once more.
MENU
NORMAL / OK
PR
- To select one of the sub-menus,
PR
use remote control CURSORS buttons UP, DOWN, LEFT, RIGHT.
- To enter the selected sub-menu,
MENU
press remote control OK button .
PR
3
4
- Confirm (if needed) by pressing
remote control OK button .
- Then Return to main menu
pressing MENU button .
NORMAL / OK
PR
MENU
MENU
PR
PR
- Select and adjust the level of each function :
SOUND
"VOLUME",
"BASS",
"TREBLE",
"BALANCE"
and "EFFECT"
VOLUME
BASS
TREBLE
BALANCE
EFFECT
OFF
* You can change the "EFFECT" as the following:
1. Available only for Dolby Virtual models.
OFF -> SPATIAL -> PANORAMA -> DOLBY VIRTUAL -> OFF...
2. Available only for Non-Dolby Virtual models.
OFF -> SPATIAL -> OFF...
12
MENUS
1. Language selection
FEATURES
LANGUAGE
2. Child lock prevents the use of the TV set
without remote control unit.
CHI LD LOCK
CLOCK
WAKE TI ME
WAKE PR
3. TV clock setting
- Note that if you turn off the set with the MAIN POWER button,
the clock setting is lost and must be reset if necessary.
The clock is set automatically if programme NO. 1 is selected
for at least 6 seconds, and programme NO. 1 has teletext data.
4. Wake up function
The TV set turns on at the time and with the programme
chosen by the customer. This function is only available
when clock is set and when TV set is switched to stand -by mode.
Automatic Tuning and Sorting system
I NSTALL
Programme list edition
Country
ATSS
F
TV system selection
Channel number
EDI T
SYSTEM
CHANNEL
FREQ
EURO
C 4 9
7 2 0 ,0 1
BBC 1
0 1
Channel Frequency
Channel name
NAME
PROGRAM
STORE TO
Programme number
Programme storage number
0 1
13
1. Select the menu language.
GB
2. Child lock Select this value ON or OFF:
OFF
0 0 : 0 0
OFF
-
When switched ON: the stand-by indicator will flash red and green, child
lock is operating.
- The set can only be switched ON with the remote control unit.
0 1
3. Set TV clock with remote control 0 9 NUMBER buttons,
then clock starts.
4. Switch "wake up" function ON/OFF with
remote control CURSOR LEFT or RIGHT button
- Enter wake up time with remote control 0...9 NUMBER buttons
NB. This function doesn’t work with CHILD LOCK ON.
5. Select TV programme number that will
appear when set comes on.
EDI T
PR
NAME
CH
SKI P
Programme number
Station name
0 5
0 4
0 3
0 2
0 1
9 9
9 8
CH 5
C2 1
C2 9
C3 2
C4 8
C6 9
C1 0
C0 4
These are examples
and could be any
number between
Ch21 and Ch69.
CH 4
I TV
BBC 2
BBC 1
- - - - -
- - - - -
Channel number
Skip code
: programme skipped.
14
MENUS
Automatic Tuning and Sorting System
- Press remote control "OK" button for
more than 3 seconds to start the automatic
tuning.
- When automatic tuning is finished, recordable
programmes are displayed on screen.
- Select "ATSS" function.
- Select required country.
- Note for satellite receiver users :
Before starting ATSS, connect your
equipment to the TV set, or via the VCR, turn it
ON and tune in SKY NEWS.
This menu shows the programme position assignment, you can change the programme
position according to your personal preference.
- Select the "EDIT" function and confirm
by pressing The remote control "OK" button :
Edit menu appears and shows the existing
programmes already tuned.
- The number a programme is already
Stored/Assigned to can be altered to your
personal preference as follows:
2
1
Channel skipping
Channel deleting
- You can select skip "YES" or "NO" using
the remote control SKIP button .
A programme with skip " " doesn’t appear
on screen when changing programmes with
PR UP/ DOWN buttons.
- Select the programme to delete using
remote control CURSOR UP/ DOWN buttons.
- Press the remote control DELETE button .
The deleted programme is moved to the
programme number 99 with skip " ".
The existing 99 programme is moved to
programme number 98 and so on.
3
Channel order changing
4
- Select the programme you wish to move using
the remote control CURSOR UP( ) / DOWN( )
button.
Station name entering - copying a
programme to another programme number
- Press the remote control MOVE button : the
programme appears in red and can be moved
to another position using remote control
CURSOR UP/ DOWN buttons.
- Use Install menu "Name" and " Store to"
functions as explained in the manual
channel tuning paragraph.
- When the required position is reached, confirm
this new position by pressing the remote control
MOVE button. Then, the programme appears
again on green.
15
1
2
TV system Selection
Choose starting point
Select the "Program" function and then
the programme which you want to start
manual tuning. Then, the channel number,
the frequency, If you don’t know the frequency
or channel number then refer to channel
searching section. The name and the programme
number of this programme are displayed in
the install menu.
If necessary, you can change the TV system :
- Select "system" function.
- Choose between :
FRANCE (L/L’), GB (I),
EURO (B/G), E / EURO (D/K) system.
Then, the programme displayed on
screen is changed to the system chosen.
This procedure can be applied to any individual
programme selected.
4
3
Channel searching
Fine Tuning
- Select "Freq." function.
- Press the remote control
- If you are unable to get a good picture or
sound because of poor reception, it is possible
to fine tune a signal.
- Select channel frequency ("Freq.") function.
- Press and release the remote control
CURSOR RIGHT/LEFT
CURSOR RIGHT / LEFT buttons for more than
3 seconds to start (up / down) manual tuning.
- After searching, tuning will stop automatically
to the next channel.
(To stop searching press the remote control
MENU button)
buttons to fine tune a signal.
Note: If you know the channel number or the
frequency of the channel you want to
search, you can set these channels,
entering the data directly into "channel"
or "Freq." setting option.
5
6
Enter station name
Store programmes in memory
- Select "name" function.
To store a programme in memory
- Select "store to" function
- Adjust the programme number you want to
store and confirm by pressing the remote control
"OK" button. (Program number will breifly turn red!)
- Use the CURSOR RIGHT/LEFT
buttons to select the character (letter)
you want to insert.
- To modify this letter press the
CURSOR UP/DOWN buttons until the
desired letter is displayed and press
OK button to confirm.
Remarks: this function can be used also if you
want to copy a programme already
memorised to another programme number.
16
TELETEXT
1- SWITCHING TELETEXT ON/OFF
- Select the channel which is broadcasting the teletext programme you want to watch
- Press the remote control TELETEXT (
) button to select teletext mode.
The overview station page or the last page viewed (If you watched teletext on this channel
previously) appears.
- If you need to return to TV mode, press again, the remote control TELETEXT (
) button .
2-PAGE SELECTION
- You can enter directly the desired page number with the remote control NUMBER 0...9 buttons .
- You can sequentially select page numbers by pressing the remote control PAGE UP / DOWN buttons.
- In fast text mode, you can select directly one of the four options at the botton of the screen
using the remote control corresponding coloured buttons.
3- USEFUL FUNCTIONS WHILE WATCHING TELETEXT PAGES
INDEX (
) button : Allows you to return directly to the overview page of the station you are viewing.
SUBPAGE (
) button : Allows you to enter a subpage directly :
- Press SUBPAGE button .
- Enter directly the subpage number you want with the remote control
NUMBER 0...9 buttons :
for example to enter the 2nd page, sequence 0002.
Then wait for it to appear. (Meanwhile you can watch TV by pressing the
cancel button and when the page number appears press the cancel button
again to retrieve this selected sub-page.)
PAGE HOLD (
) button : Any teletext page or subpage can be held on the screen by pressing
the PAGE HOLD ( ) button.
Press the button again to cancel the hold mode.
REVEAL (
) button : Press this button to reveal on certain pages, hidden information such as the
answer to a quiz.
?
Press the button again to hide the information.
17
4-TELETEXT FORMAT, PICTURE, SOUND CONTROL
Doubling character size
Repeatedly pressing the SIZE (
) button doubles the character size in the following order :
Upper half of the page > Lower half of the page > Return to normal size.
Volume and brightness control in teletext mode
Pressing the MENU button in teletext mode, the volume and brightness control menu will be displayed
at the bottom of the screen.
You can adjust volume and brightness using the corresponding colour on the remote control unit.
5-OTHER FUNCTIONS AVAILABLE
Superimpose teletext broadcasting with the current TV program using MIX button
Press MIX (
) button again to return to the normal teletext display.
Watch a TV programme and keep informed at the same time if some teletext pages are updated
- To do this, press CANCEL (
) button . Then, TV programme appears on screen and the teletext symbol
appears at the top of the screen.
When teletext programme is updated, the concerned page number appears on the screen. Note that the
TV programme cannot be changed with CANCEL button activated.
- Pressing the CANCEL button again, the teletext page appears with the updated information.
18
|