Curtis LCD1911 User Manual

Model: LCD1911  
Please read this User Manual carefully to ensure the proper use of this product and  
keep this manual for future reference  
SAFETY AND WARNINGS  
IMPORTANT SAFETY INSTRUCTION  
1.Read these safety instructions.  
2.Keep these safety instructions.  
3.Heed all warnings.  
4.Follow all safety instructions.  
5.Do not use this apparatus near water.  
6.Clean only with dry cloth.  
7.Do not block any ventilation openings. Install in accordance with the manufacturers  
instructions.  
8.Do not install near any heat sources such as radiators,stoves, or other apparatus  
(including amplifiers)that produce heat.  
9.Protect the power cord from being walked on or pinched particularly at power outlets, and the  
point where they exit from the apparatus.  
10.Only use attachments/accessories specified by the manufacturer.  
11.Unplug this apparatus during lightning storms or when unused for long periods of time.  
12.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has  
been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been  
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture ,  
does not operate normally, or has been dropped.  
13.Apparatus must not be exposed to dripping or splashing and no objects filled with liquids, such  
as vases, should be placed on the apparatus.  
-2-  
SAFETY AND WARNINGS  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN!  
CAUTION  
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT  
REMOVE COVER (OR BACK).NO USER SERVICEABLE  
PARTS INSIDE. REFER SERVICING TO QUALIFIED  
SERVICE PERSONNEL.  
The symbol indicates that dangerous voltages constituting a risk of electric  
shock are present within this unit.  
The symbol indicates that there are important operating and maintenance  
instructions in the literature accompanying this unit.  
WARNING:  
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.  
-3-  
SAFETY AND WARNINGS  
Warning  
High voltages are used in the operation of this television receiver.  
Do not remove the cabinet back from your set. Refer servicing to  
qualified service personnel.  
Warning  
To prevent fire or electrical shock hazard, do not expose the  
television receiver to rain or moisture.  
Warning  
Do not drop or push objects into the television cabinet slots or  
openings. Never spill any kind of liquid on the television receiver.  
Caution  
Do not block the ventilation holes in the back cover. Adequate  
ventilation is essential to prevent failure of electrical components.  
Caution  
Do not trap the power supply cord under the television receiver.  
-4-  
SAFETY AND WARNINGS  
Caution  
Never stand on, lean on, or suddenly push the television or its stand.  
You should pay special attention to children. Serious injury may result  
if it falls.  
Caution  
Do not place your television on an unstable cart, stand, shelf or table.  
Serious injury to an individual , and damage to the television, may  
result if it falls.  
Caution  
When the television receiver is not used for an extended period of  
time, it is advisable to disconnect the AC power cord from the AC  
outlet.  
Caution  
Avoid exposing the television receiver to direct sunlight and other  
sources of heat. Do not stand the television receiver directly on other  
products which give off heat, e.g. video cassette players and audio  
amplifiers. Do not place naked flame sources, such as lighted candles  
on the television.  
Caution  
If the television is to be built into a compartment or similar enclosure,  
the minimum distances must be maintained. Heat build-up can reduce  
the service life of your television, and can also be dangerous.  
Dim:515*320mm(  
-5-  
SAFETY AND WARNINGS  
Thank you very much for purchasing this TV. To enjoy your product from the very beginning, read this  
manual carefully and keep it handy for easy reference.  
INSTALLATION  
Locate the TV in the room where light does not strike the screen directly.  
Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is  
recommended for comfortable viewing.  
Allow enough space between the TV and the wall to permit ventilation.  
Avoid extremely warm locations to prevent possible damage to the cabinet or premature component  
failure.  
This TV can be connected to AC 100-240 Volts. 50/60 Hz. Never connect to a DC supply or any other  
power supply.  
Do not cover the ventilation openings when using theTV.  
CAUTION  
Never tamper with any components inside the TV, or any other adjustment controls not mentioned in this  
manual. All LCD-TVs are high voltage instruments. When you clean up dust or water drops on the LCD  
PANEL or CABINET, the power cord should be pulled out from the receptacle, then wipe the TV with  
a dry soft cloth. During thunder and lighting, unplug the power cord and antenna cord to prevent damage  
to your TV.  
All repairs to this TV should only be performed by qualified TV service personnel.  
Earthing connection--- The apparatus shall be connected to MAINS socket outlet with a protective  
earthing connection  
MAINS plug or appliance coupler of the apparatus is used as disconnect device, it should remains  
readily operable  
Warning: Change or modifications to this unit not expressly by the part responsible for  
compliance could void the user's authority to operate the Equipment.  
NOTE:  
This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are designcd to provide reasonable  
protection against harmful interference in a residential installation. This equipment generates,  
uses, and can radiate radio frequency energy and, if not installed and used in accordance with  
the instructions, may cause harmful interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
-Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and receiver.  
- Connect the equipment into an outlet on a circuit different from that to which the receiver  
is connected .  
-Consult the dealer or an experienced radio TV technician for help.  
Shield cables must be used with this unit to ensure compliance with the Class B FCC limits.  
-6-  
INTRODUCTION  
Main features  
Used as Television, display terminal,PC display  
High luminance,wide viewing angle  
Can store AIR 2-69,HRC 1-125,IRC 1-125,CATV 2-125 TV programs  
Dual HDMI interface  
5
BTSC  
Main parameter  
PANEL SIZE  
RESOLUTION  
48.26CM(19inch)diagonal  
1440pixels(horizontal)x900pixels(vertical)  
TV SYSTEM  
NTSC  
Antenna 75Ohm Coaxial Cable  
VGA-in  
CVBS INPUT  
YPbPr  
1
1
1
INPUT  
AV OUTPUT  
S-VIDEO  
AUDIO  
1
1
2
High-Definition Multimedia Interface(HDMI)X1  
4Ohm  
3Wx2  
Speaker  
Audio Output  
Power Consumption  
AC100-240,50/60Hz,50W  
-7-  
INSTALLATION  
Accessories  
AC Power Cord.........................  
Infrared Remote Control......  
User s Manual ........................  
Battery(AAA)..........................  
HDMI cable is no included.  
1
1
1
2
Front panel  
3
4
2
1
30 30  
1: Remote control sensor.  
2: Indicator LED: GREEN  
RED  
POWER ON.  
STAND BY.  
P
O
W
E
R
M
U
C
T
E
N
I
A
M
1
4
7
2
5
8
3
6
9
R
ECALL  
0
T
V
M
E
N
U
INPUT  
3: Control Panel (see next page).  
4: Power: Press this button to turn the unit  
ON from STANDBY mode.  
ENTER  
D
V
B
M
E
N
U
S
O
U
N
D
EXIT  
+
+
VOL  
_
P
I
C
CH  
_
S
L
E
E
P
ASPECT  
S
O
I
U
R
C
E
D
I
S
P
L
AY  
T
E
X
T
N
F
O
FAV  
EPG  
R
E
V
E
A
L
H
O
L
D
L
I
S
T
I
N
B
DEX  
S
U
B
PA  
G
E
S
I
Z
E
A
U
D
I
O
S
U
TITLE  
Press it again to turn the set back to  
STANDBY.  
5: when TV is in standby mode, press CH + or  
CH button in TV control panel will power  
on the TV.  
-8-  
INSTALLATION  
CONTROL PANEL  
SOURCE  
MENU  
CH+  
CH-  
VOL+  
VOL-  
1
2
3
SOURCE  
Display the input source menu.  
MENU  
To display main MENU.  
CH+/CH-  
In TV mode press CH+ or CH- to change the channel up and down.  
In MENU,press CH+ or CH- to select items in MENU.  
when TV is in standby mode, press CH+ or CH- button in TV control panel will power  
on the TV.  
VOL+/VOL-  
4
Adjust sound level.  
In MENU,adjust the item that you selected.  
REAR AV Connection  
AV  
L
Y
Pr  
100-240V~ 50/60Hz  
VGA INPUT  
AUDIO  
VGA INPUT  
HDMI  
AUDIO  
INPUT  
YPbPr  
INPUT  
ANT  
AC-INPUT  
S-VIDEO  
R
Pb  
All the terminals are(from left to right):  
AC POWER SOCKET,HDMI,VGA ,PC AUDIO(HDMI in DVI mode share this audio channel),  
CVBS,S-VIDEO,YPbPr,ANTENNA.  
Note: CVBS,S-VIDEO and YPbPr share one audio channel.  
-9-  
INSTALLATION  
ANTENNA  
Note:  
Aerial connections:IEC(female).  
Input impendance:75 unbalanced.  
-10-  
INSTALLATION  
PC  
STEPS:  
Be sure both the TV and computer are set to Power off.  
1.Connect VGA and audio cable.  
2.Connect the power cord.  
3.Power on the TV, switch to PC mode.  
4.Power on the PC.  
This sequence is very important.  
8
AV  
L
Y
Pr  
100-240V~ 50/60Hz  
VGA INPUT  
AUDIO  
VGA INPUT  
HDMI  
AUDIO  
INPUT  
YPbPr  
INPUT  
ANT  
AC-INPUT  
S-VIDEO  
R
Pb  
-11-  
INSTALLATION  
PC  
PRESET MODE(recommended resolution is 1440*900@60Hz)  
V.Freq.(Hz)  
H.Freq.(KHz)  
RESOLUTION  
1
2
3
4
5
720*400  
70  
31.47  
640*480  
640*480  
640*480  
60  
72  
75  
31.47  
37.86  
37.50  
800*600  
800*600  
56  
60  
35.156  
37.88  
6
7
800*600  
800*600  
1024*768  
75  
72  
60  
46.88  
48.08  
48.36  
8
9
10  
1024*768  
1024*768  
70  
75  
56.48  
60.02  
11  
12  
1280*1024  
1280*1024  
60  
75  
63.98  
80.00  
13  
14  
15  
59.88  
74.98  
1440*900  
1440*900  
55.93  
70.63  
-12-  
INSTALLATION  
AV EQUIPMENT  
This TV provides one group of AV ,one S-Video,one group of YPbPr for convenient connection  
to VCR,DVD or other video equipment. Please refer to the owner s manual of the equipment to  
be connected as well.  
You can use the input terminals on TV set rear as follows.  
To audio  
outputs  
with  
terminal  
VIDEO EQUIPMENT with YPbPr  
To video  
output  
VIDEO EQUIPMENT  
G
B
R
Y
W
R
Yellow (video)  
White(audio L)  
Red(audio R or Pr)  
Blue(Pb)  
B
G
Green(Y)  
Y
W
R
G
B
R
AV  
L
Y
Pr  
100-240V~ 50/60Hz  
VGA INPUT  
AUDIO  
VGA INPUT  
HDMI  
AUDIO  
INPUT  
YPbPr  
INPUT  
ANT  
AC-INPUT  
S-VIDEO  
R
Pb  
W
R
with S-video  
terminal  
VIDEO EQUIPMENT  
W
R
To S-VIDEO  
output  
To audio outputs  
It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder,  
video game or stereo system, etc.....  
YPbPr can support these video fomats:480i,576i,480p,576p,720p,1080p,1080i.  
-13-  
INSTALLATION  
Insert Batteries Into the Remote Control  
1. Remove the battery cover.  
2. Place 2 AAA batteries (included) making sure the polarity (+ or -) of the batteries matches the polarity  
marks inside the unit.  
3. Mount the battery cover.  
Replace the batteries when the TV set begins to show the following symptoms:  
Operation is unsteady or erratic. Sometimes the TV set does not function with Remote Control Unit.  
Remark:  
1) Alkaline Battery Recommended.  
2) Remove batteries when they are exhausted or if the remote control is not to be used for long time.  
-14-  
REMOTE CONTROL  
REMOTE CONTROL  
1: POWER  
TV on/off  
2: NUMBER KEY:  
For direct access to program. For a 2 (3) digit  
program number,The second (third) digit must  
be entered before the dash disappears. The  
number, the name (and the sound mode, in  
analogue mode) are displayed for a few  
seconds.  
POWER  
MUTE  
11  
12  
13  
1
2
MTS/SAP  
RECALL  
1
4
2
5
8
3
6
9
3: MENU  
To display TV menu or to return to the previous  
menu.  
4: CURSOR  
To move within the menu.  
5: EXIT  
To exit menu.  
6: VOL+/-  
To adjust sound level.  
7: P.M  
To switch picture mode.  
8: AUTO  
7
0
MENU  
SOURCE  
14  
15  
3
4
ENTER  
16  
17  
5
6
EXIT  
+
TV DISPLAY  
+
S.M  
P.M  
Auto adjust in PC mode.  
9: SLEEP  
18  
VOL  
_
CH  
_
Set time to turn off the TV.  
10:V-CHIP  
Setting the V-chip level .  
11: MUTE  
To disable or enable the sound.  
12: MTS/SAP  
7
8
AUTO  
ASPECT  
19  
20  
SLEEP  
V-CHIP  
CC  
SV  
9
TV  
AV  
10  
Switch the sound stereo, SAP and mono.  
13: RECALL  
YPbPr  
HDMI  
PC  
TT  
21  
22  
To access the previously viewed program.  
14: SOURCE  
Change input source.  
15: ENTER  
Confirms selection.  
AIR  
STD  
HRC  
IRC  
16: TV DISPLAY  
Displays/removes the program Information  
17: S.M  
To switch sound mode.  
18: CH+/CH-  
To access the next or previous Program.  
19: ASPECT  
To change picture aspect .  
20: CC  
Switch the close caption mode (CC1-  
CC4,Text1-Text4)  
NOTE:  
21:TV/AV/SV/HDMI/YPbPr/PC/TT/AIR/STD  
/HRC/IRC  
Hot keys directly go to appointed source.  
22. Color Keys: Optional for other version  
4 coloured knobs on the bottom  
of the remote control is optional for  
other version  
-15-  
OPERATION  
1. PICTURE MENU  
The first item of the MENU is picture menu.  
You can adjust picture effects here, such as contrast, brightness, etc.  
Press  
to move, press  
to adjust.  
60  
CONTRAST  
BR IGHTNESS  
TINT  
47  
50  
50  
26  
COLOR  
SHARPNESS  
COLOR TEMP .  
ASPECT.  
NORMAL  
16:9  
Note:  
There are three colour temperature modes which can be selected : NORMAL, WARM, COOL.  
2.SOUND MENU  
The second item of the MENU is the sound menu.  
You can adjust the sound here.  
Press  
to move, press  
to adjust.  
57  
BASS  
SOUND  
53  
50  
TREBLE  
BALANCE  
OFF  
AUTO VOLUME  
-16-  
OPERATION  
3.FUNCTION MENU  
The third item of the MENU is the function menu.  
You can adjust the settings below:  
1).3D NR: adjust this item , you can see the noise reduction effect in the picture only for TV  
and AV source.  
2).CLOSED CAPTION: switch close caption mode..  
3).PARENT CONTROL: Enter V-chip control.  
4).FACTORY DEFAULT: Reset all the settings to default value.  
FUNCTION  
OFF  
OFF  
3D NR  
CLOSED CAPTION  
PARENT CONTROL  
FACTORY DEFAULT  
1.Parent control: put in the password, it will go into V-chip coutrol menu. Factory default  
password is 6666.  
CHANGE PASSWORD  
FUNCTION  
OFF  
V-CHIP  
TV-RATING  
NONE  
MPAA-RATING  
ENGLISH-RATING  
FRENCH-RATING  
E
E
1).Change password:can change the current parent control password to the new  
password,you need to input the new password twice before it can be changed successfully.  
2).V-chip:switch the V-chip ON or OFF.  
3).TV-rating:it would goto TV-rating control menu as below.  
-17-  
OPERATION  
ALL  
U
FV  
B
V
S
L
D
FUNCTION  
TV-Y  
TV-Y7  
TV-G  
B
B
B
B
B
B
B
B
TV-PG  
B
B
B
B
B
B
B
TV-14  
B
TV-MA  
ENTER KEY : BLOCK OR UNBLOCK  
Content  
S
(Fantasy (Violence) (Sexual (Adult  
FV  
V
L
D
(Sexually  
Rating Content  
violence)  
situation) language)suggestive  
dialog)  
TV-Y (All children)  
TV-Y7(Direct to  
order children)  
X
Suggested  
age  
TV-G(General  
audience)  
TV-PG(Parental  
Guidance suggested)  
X
X
X
X
X
X
X
X
X
X
X
TV-14(Parents strongly  
cautioned)  
TV-MA(Mature  
audience only)  
And use ENTER.key to switch block unblock V-chip teature.  
4).Movie-rating:switch the movie-rating control level; none,G,PG, PG-13,R,NC-17,X.  
Rating  
Description  
G
General audiences, All ages admitted  
Parental guidance suggested. Some material may not be  
suitable for children.  
PG  
Parents strongly cautioned. Some material .may be  
inappropriate for children under 13.  
Age  
PG-13  
R
Restrict. Under 17 requires accompanying parent or adult  
guardian (age varies in some jurisdictions).  
NC-17 No one 17 and under admitted.  
X is an order rating that is unified with NC-17 but may be  
encoded in the data of order movies.  
-18-  
OPERATION  
5).English-rating:switch the english-rating control level:E,C,C8+,G,PG,14+,18+.  
Rating  
E
Description  
Exempt: Includes news, sports, documents and other information  
programming: talk shows, music videos, and variety programming.  
Children: Intended for younger children under the age of 8 years. Pays  
C
could threaten their sense of security  
careful attention to themes that  
and well-being.  
C8+ Children over 8 years old: Contains no portrayal of violence as the  
resolve conflict; nor encourage  
preferred, acceptable, or only way to  
Age  
children to imitate dangerous acts which they may see on the screen .  
General: Considered acceptable for all age groups, Appropriate viewing  
for the entire family, contains very  
G
little violence, physical, verbal or  
emotional.  
PG  
Parental Guidance: Intended for a general audience, but may not be  
suitable for younger children(under the age of 8) because it could contain  
controversial themes or issues.  
14+  
Over 14 Years: Could contain themes where violence is one of the  
dominant elements of the storyline But it must be integral to the develo  
pment of plot or character. Language usage could be profane and nudity ,  
present within the context of theme.  
18+  
Adults: Intended for viewers 18 years and older and might contain  
depictions of violence,which while related to the development of plot,  
character or themes, are intended for adult viewing.Could contain  
graphic language and portrayals of secretary and nudity.  
6).French-rating:switch the French-rating control level:E, G,8ANS+,13 ANS+,16ANS+  
18ANS+.  
Rating  
Description  
E
Exempt programming  
G
General :All ages and children, contains minimal direct violence, but may  
be integrated into the plot in a humorous or unrealistic manner .  
8ans+ General but inadvisable for young children :May be viewed by a wide  
public audience, but could contain scenes disturbing to children under 8  
who cannot distinguish between imaginary and real situations.  
Recommended for viewing with paren.  
Age  
13ans+ Over 13 years: Could contain scenes of frequent violent scenes and in  
tense violence.  
16ans+ Over 16 years: Could contain frequent violent scenes and violence.  
18ans+ Over 18 years: Only for adult viewing. Could contain frequent violent  
scenes and extreme violence.  
-19-  
OPERATION  
4.OSD MENU  
The fourth item of the menu is the OSD menu  
ENGLISH  
OSD LANGUAGE  
OSD  
50  
OSD H-POSITION  
OSD V-POSITION  
OSD TIMEONT  
50  
26  
26  
OSD TRANSPARENCY  
5.CHANNEL MENU  
The fifth item of the MENU is channel menu(only use in TV source).  
You can complete channel search and setting here.  
MONO  
MTS  
CHANNEL  
AUTO SCAN  
FINE TUNE  
ADD ERASE  
SOURCE  
128  
OFF  
CATV  
1). AUTO SCAN  
Search all the channels automatically.  
2). FINE TUNE  
Fine tune the current program.  
3) .ADD ERASE  
4). SOURCE  
Select the TV source to auto scan the TV program.  
-20-  
OPERATION  
In PC Mode, there are two items that are different with other sources.  
1. PC MENU  
You can adjust picture here, such as contrast, brightness.  
Press  
to move, press  
to adjust.  
60  
47  
CONTRAST  
BR IGHTNESS  
COLOR MODE  
ASPECT  
PC  
NORMAL  
1.colour mode:only four modes could be selected: normal,warm,cool,user.  
to move,press  
2.Press  
user mode.  
to adjust RGB value according to your personal taste under  
USER  
COLOR TEMP.  
PC  
USER-R  
USER-G  
USER-B  
50  
50  
50  
2. FUNCTION MENU  
1).H-POSITION:adjust the horizontal position of the screen.  
2).V-POSITION:adjust the vertical position of the screen.  
3).CLOCK: fine tune the screen width.  
4).PHASE: fine tune the phase of the screen.  
5).AUTO: auto adjust to fit the screen.  
60  
H-POSITION  
FUNCTION  
V-POSITION  
CLOCK  
47  
47  
47  
PHASE  
AUTO  
Rest of the set up , pls refer to previous introductions.  
-21-  
Trouble shooting  
Trouble phenomenon Symptom  
Picture  
Inspection Check  
Audio  
antenna position, direction  
or connection  
Snow  
Ghost  
Noise  
antenna position, direction  
or connection  
Normal audio  
electronic equipment,car/  
motorcycle,fluorescent light  
Interference  
Noise  
Volume(check if mute is  
activated or if the audio system  
connections are not correct)  
Normal Picture  
Mute  
Power cord is not inserted  
Power switch is not ON  
Contrast and brightness/volume  
setup  
Press standby key on the remote  
control for inspecting  
No picture  
No colour  
Mute  
Normal audio  
Colour control  
retune channel  
Picture  
breaking up  
Normal audio  
or weak  
No colour  
TVsystem  
Noise  
The LCDTV panel is built with very high precision technology giving you fine picture details  
in vibrant color. Occasionally, a few non-active pixels may appear on the screen as a fixed  
point of red, green, blue, black or white. Please note this does not affect the performance of  
the product.  
-22-  

Haier HTR21S34 User Manual
Grundig VISION II LXW 68 9620, LXW 82 9620 User Manual
Eizo FlexScan S2202W User Manual
Cypress CY8CTST200 User Manual
Cypress CY7C1545V18 User Manual
Cypress CY7C1034DV33 User Manual
Compaq C360 User Manual
Black Box PC to Printer Cables User Manual
Bertazzoni X906MFE User Manual
BenQ Computer Monitor GL940 User Manual