BT 5310 User Manual

BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
User Guide  
BT DIVERSE 5310  
This equipment is not designed for making  
emergency telephone calls when the power fails.  
Alternative arrangements should be made for  
access to emergency services.  
This product is intended for connection to analogue  
public switched telephone networks and private  
switchboards in the UK.  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Please open this page for an ‘At a glance’ guide  
to your BT Diverse 5310.  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
At a glance  
Display  
Left hand side  
Displays the status  
of your handset.  
Lets you set the  
alarm clock.  
Right hand side  
Right hand side  
Takes you into the  
redial list.  
Takes you into the  
menu options.  
1
Left hand side  
Green phone  
INT  
MENU  
Allows you to  
make an internal call.  
For making and  
answering calls.  
Calls list  
Red phone  
Lets you access your  
lists – calls and SMS.  
Press to end a call, return  
the display to idle or turn  
the power on and off.  
Directory  
3 def  
6 mno  
9wxyz  
1
4
7
abc  
2
5
8
0
Used to store numbers  
and names in the  
directory.  
Handsfree  
Use to answer  
calls or make a call  
in handsfree mode.  
ghi  
jkl  
pqrs  
One button  
tuv  
As well as being the  
number one button hold  
down to access your  
Voice Mail service.  
Keypad  
+
Hash/Keyguard  
R
Hold down to switch the  
keypad guard on and off.  
Star/bell  
Switches the handset  
ringer on and off.  
Extra Directory  
Used to store an  
additional 10 names and  
numbers.  
Microphone  
Recall  
Press for use with switchboards  
and certain Network Services or  
press and hold to enter a pause.  
1
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
In this guide  
Handset settings  
Alarm clock  
33  
35  
36  
40  
41  
Please refer to the separate Using  
SMS User Guide for instructions on  
using the SMS functionality.  
Appointment call  
Walk and talk  
Room monitor  
At a glance  
1
Base station settings  
44  
44  
Base station PIN  
Main menu structure  
4
5
Messages  
Using additional handsets  
and bases  
46  
46  
Quick guide  
6
Registering additional handsets  
Quick guide to handset  
display icons  
Help  
49  
7
General information  
Guarantee  
51  
Introduction  
8
8
8
51  
Unpacking your BT Diverse 5310  
For your records  
BT Accessories and  
Replacement Items  
Technical information  
Switchboard compatibility  
Setting pauses  
51  
52  
52  
54  
Safety information  
9
Setting up  
10  
Using the telephone  
Making and ending calls  
Handsfree  
14  
14  
15  
16  
17  
18  
21  
22  
22  
Index  
55  
Using the directory  
Character map  
VIP ringing  
Redial  
Secrecy  
Hints and tips boxes  
In this user guide, we’ve included  
helpful tips and important notes.  
They are shown in boxes like this.  
Paging and internal calls  
Caller Display and other  
BT Calling Features  
25  
25  
Helpline  
Caller Display  
Calls  
Call Waiting  
Other BT Calling Features  
list25  
28  
If you experience any difficulties  
with your BT Diverse 5310, please  
call the BT Diverse Helpline on  
08457 908 070.  
28  
Additional features  
31  
31  
Voice Mail  
BT Diverse Helpline – 08457 908 070  
3
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Menu structure  
SMS  
Write message  
Incoming  
Outgoing  
Settings  
-
>
Service Centres  
Service Centre 1  
Service Centre 5  
SMS > 1-3  
SMS Mailboxes  
Notify Number  
Notify Type  
Missed Calls  
Select Services  
Withhold Number  
For All Calls  
Call Divert  
All Calls  
No Answer  
When Busy  
On  
Call Waiting  
Off  
Cancel Ringback  
Room Monitor  
Additional Features  
Call Internal  
Call External  
Level  
Walk and Talk  
Calender/Clock  
Set Appointment  
Enter Date  
Enter Time  
Enter Text  
Alarm Clock  
Date/Time  
Time Mode  
Enter Alarm Time  
12 Hour  
24 Hour  
Audio Settings  
Earpiece Volume  
Handsfree Volume  
Ringer Volume  
Ringer Melody  
External Calls  
Internal Calls  
Appointment  
Alarm Clock  
All Ringer Tones  
Key Tones  
Advisory Tones  
Battery Low  
Off  
On  
During Call  
Confirmation Tone  
BT Diverse Helpline – 08457 908 070  
4
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Handset Settings  
Auto Answer  
Language  
Register Handset  
Select base  
Reset Handset  
Base Settings  
System-PIN  
Base Reset  
Additional Features  
Dialling mode  
Recall  
Tone  
Pulse  
Tone-Earth  
80 ms  
to  
800 ms  
Repeater Mode  
Listening in  
System – PIN  
Voice Mail  
Set Key 1  
Network Mailbox  
Note  
If your handset is registered to a BT Diverse 5350 answering machine base, you  
will have additional menus in Voice Mail. Please refer to your BT Diverse 5350  
guide to see what further menus are now available.  
Messages  
Press  
to get to your Mailbox and access your text messages, voicemail and  
Calls list.  
The following functions are available:  
SMS  
Network Mailbox  
Calls List  
Delete entry  
Copy to directory  
Date and time  
Status  
Delete list  
BT Diverse Helpline – 08457 908 070  
5
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Quick guide to  
handset settings  
Page  
no  
Switch the handset  
OFF/ON:  
Hold down.  
14  
(default is ON)  
Switch Keyguard  
on/off  
39  
33  
Hold down.  
Switch handset  
ringer off  
Hold down.  
or  
Make a call  
.
14  
21  
Redial a number  
to scroll through the list  
to dial.  
Copy a displayed  
number in the redial  
list to the directory  
Menu  
OK OK  
add name  
to display Copy to directory  
21  
display shows Save entry  
.
Menu  
OK  
Dial from the  
directory  
to name or number you want to dial  
.
18  
26  
Dial from Calls list  
to display CallsList  
to display the number you want  
.
OK  
Adjust handsfree  
volume whilst in  
handsfree mode  
Display shows Volume  
to decrease/increase volume  
.
15  
33  
Menu  
Menu  
OK  
OK  
Adjust earpiece  
volume  
display shows Volume OK  
to decrease/increase volume OK  
.
Make internal call  
Call all handsets  
then  
select handset and click on  
.
22  
22  
Int  
Int  
to CallAll  
.
Transfer call to  
another handset  
23  
23  
13  
then  
select handset and click on  
. When user answers press  
.
Int  
Put caller on hold  
while you make  
an internal call  
Int then  
Backwill be selected press  
select handset and click on  
. When finished press  
.
Menu  
OK  
.
OK  
Set date and time  
to display Calendar/Clock  
to display Date/Time  
Menu  
OK  
. Select am/pm  
OK  
enter date  
enter time  
.
OK  
OK  
BT Diverse Helpline – 08457 908 070  
6
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Quick guide to handset  
display icons  
Redial, lists up to the last 10 dialled number.  
Flashes to indicate new messages (e.g Calls or SMS).  
For calling other handsets.  
INT  
Opens the menu.  
MENU  
Shows the status of the handset battery.  
Scroll through the menu.  
Confirms the function displayed.  
OK  
Scroll left and right when entering numbers or messages.  
Deletes numbers/characters (from left to right).  
C
Ringer off.  
Handset locked.  
eg.  
1
Shows the number of the handset and is displayed in top left hand corner.  
Appears when the time and date is set, allows access to Calendar/Clock  
functionality.  
BT Diverse Helpline – 08457 908 070  
7
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Introduction  
Unpacking your  
BT Diverse 5310  
For your records  
Date of purchase:  
Place of purchase:  
If anything is missing, please contact  
your place of purchase immediately.  
BT Diverse 5310  
One BT Diverse 5310  
base station  
For guarantee purposes proof of  
purchase is required so please keep  
your receipt.  
One BT Diverse 5300  
handset  
Enter your system PIN code here:  
One power supply  
for the base station  
For more information on your system  
PIN, see page 44.  
One telephone  
line cord  
Two AAA rechargeable  
batteries  
One belt clip  
Battery compartment  
cover  
BT Diverse Helpline – 08457 908 070  
8
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Safety information  
Safety information  
General  
Cleaning  
Only use the power supply included  
with the product. Using an  
unauthorised power supply will  
invalidate your guarantee and may  
damage the telephone. Power supply  
number is M-GA35-095130F.  
Simply clean the handset and base  
station with a damp (not wet) cloth, or  
an anti-static wipe. Never use household  
polish as this will damage the product.  
Never use a dry cloth as this may cause  
a static shock.  
For the handset use only AAA 1.2V  
Nickel Metal Hydride (NiMH)  
Environmental  
Do not expose to direct sunlight.  
rechargeable batteries with a minimum  
capacity of 700 mAh. Never use other  
batteries or conventional alkaline  
batteries. They could lead to a short  
circuit or destroy the battery casing.  
Batteries and accessories are available  
or call 0870 240 5522.  
The product may heat up when the  
batteries are being recharged. This is  
normal. However, we recommend that  
you do not place the product on  
antique/veneered wood to avoid damage.  
Do not stand your product on carpets or  
other surfaces which generate fibres, or  
place it in locations preventing the free  
flow of air over its surfaces.  
If the Keyguard is switched on, it is  
NOT possible to make calls, including  
emergency numbers (999/112).  
Do not submerge any part of your  
product in water and do not use it in  
damp or humid conditions, such as  
bathrooms.  
Do not open the base station or handset  
(other than to change batteries). This  
could expose you to high voltages or  
other risks.  
Do not expose your product to fire,  
Radio signals transmitted between the  
handset and base may cause interference  
to hearing aids.  
explosive or other hazardous conditions.  
There is a slight chance that your phone  
could be damaged by an electrical storm.  
We recommend that you unplug the  
power and telephone line cord during an  
electrical storm.  
This product should not be used near  
emergency/intensive care medical  
equipment and should not be used by  
people with pacemakers.  
Never dispose of batteries in a fire. There  
is a serious risk of explosion and/or the  
release of highly toxic chemicals.  
BT Diverse Helpline – 08457 908 070  
9
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Setting up  
2 Plug the power supply  
unit into the wall socket  
Plan the location  
Situate your product close enough to  
the telephone and mains power sockets  
so that the cables will reach.  
Make sure it is at least 1 metre away  
from other electrical products to avoid  
interference.  
Do not situate the product in the  
bathroom or other humid areas.  
WARNING  
1 Connect the base station  
Do not connect the telephone line cord  
to the phone socket until your handset  
is fully charged. This will prevent the  
risk of the phone being answered before  
the battery is charged. Answering the  
phone before the battery is fully  
Plug the power supply cable into the  
power socket on the underside of your  
base.  
charged may prevent it from reaching  
its optimum capacity.  
BT Diverse Helpline – 08457 908 070  
10  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
3
Registering and charging  
the handset  
WARNING  
Under no circumstances should  
non-rechargeable batteries be used.  
Only use AAA 1.2V Nickel Metal  
Hydride (NiMH) rechargeable  
batteries with a minimum capacity of  
700mAh.Using inappropriate batteries  
will invalidate your guarantee and  
may damage the telephone. Batteries  
and accessories are available from  
or call 0870 240 5522.  
The display is protected by a plastic  
film. Remove the protective plastic film  
from the display.  
INT  
MENU  
To register your handset, place it in the  
base station with the display facing  
upward. After approx. one minute, the  
handset’s internal number is displayed  
(e.g.: 1). Successful registration is  
signalled by a confirmation tone.  
Insert the batteries  
Insert the two batteries supplied, as  
indicated inside the battery  
compartment and slide the battery  
compartment cover shut.  
When the handset is registered the  
display will show:  
1
INT  
MENU  
The battery cover may be found in the  
packaging with the batteries.  
BT Diverse Helpline – 08457 908 070  
11  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Out of range?  
If the icons on the display  
flash continuously...  
If you go out of range of a base station  
for a long time while your handset is  
switched ON, it may take more than  
20 minutes to findthe base station  
again when you come back within  
range. However, by simply switching  
the handset OFF for a moment, then  
ON again, it will find the base station  
within a few seconds.  
It means that the handset is not  
registered with the base station.  
Ensure you have correctly carried out  
step 3 above. If the product has still  
not registered, please see Registering  
manuallyon page 47.  
All additional handsets you purchase  
will need to be individually registered  
with the base station before they will  
work with the BT Diverse 5310.  
Battery performance  
Batteries and case may become warm  
during charging. This is normal.  
Leave the handset for approx. 16 hours  
in the base station to charge the  
batteries, as they are not charged in the  
factory. The battery status icon flashes  
on the handset to indicate that the  
batteries are being charged.  
Under ideal conditions, the handset  
batteries should give about 13 hours  
talktime or 170 hours standby time  
on a single charge. However, new  
NiMH batteries do not reach their full  
capacity until they have been in  
normal use for several days.  
The charge capacity of rechargeable  
batteries will reduce with time as they  
wear out, so reducing the talk/standby  
time of the handset. Eventually they  
will need to be replaced. New batteries  
are available from  
Battery level icons  
When the batteries are almost flat a  
beep sounds and the display shows the  
empty battery icon. You will need to  
recharge your handset before you can  
use it. The various states of charge  
are shown below:  
or call 0870 240 5522.  
Batteries fully charged  
Batteries at 66%  
Batteries at 33%  
Batteries empty  
If you replace the handset batteries  
with ones that have been fully charged,  
the battery indicator will not show full  
until the next charge cycle has been  
completed. Charge the handset until  
the batteries register full again. From  
then on the display will be correct.  
BT Diverse Helpline – 08457 908 070  
12  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
4 Connect the telephone  
Setting the date and time  
line cord to the base and  
plug into the wall socket  
MENU  
Press the Menu options button.  
Press the DOWN navigation  
button until the display shows  
Calender/Clock.  
Ensure that each end of the line cord is  
fitted into the correct socket.  
OK  
Press the OK options button.  
Set Appointmentappears.  
Press the DOWN navigation  
button until the display shows  
Date/Time.  
OK  
OK  
OK  
Press the OK options button.  
Fit the belt clip onto the back of the  
handset.  
Enter the day/month/year, e.g.  
05 10 03 for 5th October 2003.  
Press the OK options button.  
Slot  
Enter the time hours/minutes.  
e.g. 0925 for 9:25am.  
Press the OK options button.  
Use the UP/DOWN navigation  
buttons to select am/pmif in 12  
hour mode.  
OK  
OK  
Press the OK options button.  
Your BT Diverse 5310 is now  
ready for use.  
Press the DOWN navigation  
button to Time Mode.  
Press the OK options button.  
Note  
Use the UP/DOWN navigation  
buttons to select 12 or 24 hour  
display (12hr is the default).  
If you subscribe to a Caller Display  
service the time and date will be set  
with the first incoming call.  
However, the year setting will have to  
be changed manually. See opposite.  
OK  
Press the OK options button.  
Press the RED PHONE button  
until you reach the idle display.  
BT Diverse Helpline – 08457 908 070  
13  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Using the telephone  
Preparatory dialling  
Note  
To exit a menu at any time, press the  
RED PHONE button. This will take  
you back one step. Keep pressing the  
RED PHONE button to return to the  
idle screen.  
Enter the phone number first.  
If you make a mistake press  
the C options button to  
C
remove any incorrect digits.  
Press the GREEN PHONE  
button to dial the number.  
To switch the handset power  
on and off  
To end a call  
Press and hold the RED  
PHONE button to switch the  
handset off.  
Press the RED PHONE button.  
Press and hold the RED  
PHONE button to switch the  
handset on again.  
Call timer  
Your handset automatically times the  
duration of all external calls, showing it  
on the display during your call and for  
a few seconds after it is finished.  
Making and ending calls  
To make an external call  
Ensure the handset is  
switched ON.  
Press the GREEN PHONE  
button. You will hear the dial  
tone.  
Dial the number.  
BT Diverse Helpline – 08457 908 070  
14  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
To receive an external call  
To make a handsfree call  
Press the GREEN PHONE  
Dial the number  
button to answer the call.  
Press the HANDSFREE button.  
The loudspeaker is switched  
on and you hear the number  
being dialled.  
Or  
If the handset is on the base,  
simply lift it up and speak.  
You do not need to press the  
GREEN PHONE button.  
To switch back to using the  
handset at any time, press the  
GREEN PHONE button.  
This is called Autotalk. You  
can switch autotalk off so you  
always have to press the  
GREEN PHONE button to  
answer a call, see page 38.  
To adjust the handsfree  
volume whilst in handsfree  
mode  
Handsfree  
Whilst in handsfree mode and  
you want to increase or  
decrease the handsfree volume.  
Handsfree allows you to talk to your  
caller without holding the handset and  
enables other people in the room to  
listen to the conversation. Your hands  
are left free, for example to take notes.  
MENU  
Press the MENU options  
button.  
OK  
Press the OK options button to  
select volume.  
Note  
Using the LEFT or RIGHT  
navigation buttons you can  
either increase or decrease the  
volume.  
You can test the handsfree function by  
dialling the BT speaking clock on 123.  
OK  
Press the OK options button  
if you want to save the new  
volume setting.  
BT Diverse Helpline – 08457 908 070  
15  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
To answer a call in handsfree  
To store an entry in the  
directory  
When the phone rings:  
Press the DIRECTORY button.  
Press the HANDSFREE button.  
The call is transferred to the  
loudspeaker.  
MENU  
OK  
Press the MENU options button.  
Display shows New Entry.  
Press the OK options button.  
Enter the telephone number.  
To switch to handsfree during  
a call  
OK  
Press the OK options button to  
enter the name.  
Enter the name.  
During a call you can switch to  
handsfree mode:  
Entering names:  
Enter the name using the letters  
on the keypad. For example, to  
enter the name TOM:  
Press the HANDSFREE button.  
The call is transferred to the  
loudspeaker.  
Press the 8 button, Tappears  
on the display.  
tuv  
8
Press the GREEN PHONE  
button to switch back to using  
the handset.  
Press the 6 button three times  
6 mno  
until the display shows O  
Then press the 6 button to  
display m  
.
6 mno  
.
Note  
For the full character map,  
see page 17.  
If you need to replace the handset in  
the base station during a call, for  
example, because the battery is flat,  
hold down the HANDSFREE button.  
MENU  
OK  
Press the MENU options  
button. Display shows Save  
Entry.  
Press the OK options button  
to confirm.  
Using the directory  
Press the RED PHONE button  
until you reach the idle display.  
You can store up to 100 names and  
numbers in the telephone directory.  
You can enter up to 32 digits and up to  
16 characters.  
BT Diverse Helpline – 08457 908 070  
16  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Note  
The first letter of each name, and the  
first letter after a punctuation mark  
are automatically shown as capitals.  
Letters are always added to the left of  
the cursor.  
Press to switch between capitals  
and lower case.  
Press to move the cursor.  
C
Press to delete from right to left.  
1
Press 1 to enter a blank space.  
Character map  
These are the characters you can use when storing a directory entry.  
1st  
2nd  
3rd  
4th  
5th  
6th  
7th  
8th  
9th  
10th 11th 12th 13th 14th  
press press press press press press press press press press press press press press  
1
1
b
e
c
f
£
2
3
4
5
6
s
$
ä
ë
ï
¥
á
é
í
abc  
2
a
à
è
ì
â
ê
î
ã
ç
3 def  
d
ghi  
4
g
h
k
n
q
u
x
,
i
jkl  
5
j
m
p
l
6 mno  
o
r
v
y
/
?
\
ö
7
ü
9
)
ñ
ß
ú
ÿ
<
+
ó
ò
ô
õ
pqrs  
7
tuv  
8
t
8
z
ù
y´  
=
-
û
æ
>
:
9wxyz  
w
aA  
.
ø
%
¿
å
¡
(
0
+
!
0
§
;
#
@
&
BT Diverse Helpline – 08457 908 070  
17  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
VIP ringing  
To dial a number in the  
directory  
You can mark directory entries of  
callers who are important to you as VIP  
callers. You can also allocate a  
particular melody to VIP callers so you  
can tell who is calling from the melody.  
The VIP melody will sound after the  
first ring tone.  
Press the DIRECTORY button.  
Press the DOWN navigation  
button to scroll through the  
names which are listed in  
alphabetical order.  
Or  
To mark a directory entry as  
a VIP caller  
Enter the first letter of the  
name you want, e.g. for Emma,  
press 3 twice to search for  
names beginning with E.  
3 def  
Press the DIRECTORY button.  
Press the GREEN PHONE  
button. The number is dialled.  
Use the DOWN navigation  
button to scroll to the entry  
you want.  
MENU  
Press the MENU button.  
To view directory entry  
Press the DOWN navigation  
button until the display shows  
VIP Entry.  
Press the DIRECTORY button.  
OK  
Press the OK options button.  
Press the DOWN navigation  
button to scroll through the  
entries.  
You will hear the current  
melody. Use the DOWN  
navigation button to select a  
melody (1-10). You will hear  
each melody as you scroll  
through.  
Or  
Press the first letter of the  
name you are looking for.  
Press the RED PHONE button  
until you reach the idle display.  
OK  
Press the OK options button.  
Press the RED PHONE button  
to return to the idle screen.  
The entry is now stored in the  
directory with VIPnext to it.  
BT Diverse Helpline – 08457 908 070  
18  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
To edit a directory entry  
To copy an entry to another  
Diverse 5000 handset  
Press the DIRECTORY button.  
You can copy individual  
directory entries from the  
directory or extra directory  
to another Diverse 5000  
handset that is registered to  
the same base.  
Use the keypad to enter the  
first letter of the name you  
wish to edit.  
Then press the DOWN  
navigation button to scroll to  
the exact entry.  
Press the DIRECTORY or  
EXTRA DIRECTORY button to  
open the directory.  
MENU Press the MENU options button.  
Press the DOWN navigation  
button until Edit Entryis  
displayed.  
Press the DOWN navigation  
button to scroll to the entry  
you want to copy.  
OK  
Press the OK button.  
MENU  
Press the MENU button.  
Edit the number, if necessary,  
using the LEFT/RIGHT and  
DELETE buttons.  
Press the DOWN navigation  
button until the display shows  
Send Entry.  
C
OK  
Press the OK button.  
OK  
OK  
Press the OK options button.  
The name will be displayed.  
Edit the name if necessary by  
using the LEFT/RIGHT and  
Use the DOWN navigation  
button to select the handset  
you wish to copy the entry to.  
C
DELETE buttons as above.  
Press the OK options button.  
If the name is correct, press  
the MENU button, Save Entry  
is displayed.  
MENU  
Press the RED PHONE button  
until you reach the idle display.  
OK  
Press the OK button. The  
display will show EntrySaved.  
Press the RED PHONE button  
until you reach the idle display.  
BT Diverse Helpline – 08457 908 070  
19  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
To copy the entire directory  
To delete an entry  
to another Diverse 5000  
handset  
Press the DIRECTORY button  
and open the directory.  
Press the DOWN navigation  
button to scroll to the entry  
you want to delete.  
You can copy the entire  
directory or extra directory to  
another Diverse 5000 handset  
that is registered to the same  
base.  
MENU  
Press the MENU options button.  
Press the DOWN navigation  
button until the display shows  
Delete Entry.  
Press the DIRECTORY or  
EXTRA DIRECTORY button to  
open the directory.  
OK  
Press the OK options button  
to confirm. You hear a  
confirmation beep.  
Press the DOWN navigation  
button to scroll to the entry  
you want to copy.  
Press the RED PHONE button  
MENU  
until you reach the idle display.  
Press the MENU button.  
Press the DOWN navigation  
button until the display shows  
Send List.  
To delete the entire directory  
OK  
OK  
Press the OK options button.  
Press the DIRECTORY button  
and open the directory.  
Use the DOWN navigation  
button to select the handset  
you wish to copy the entire  
directory to.  
MENU  
Press the MENU options button.  
Press the DOWN navigation  
button until the display shows  
Delete List.  
Press the OK options button.  
Press the RED PHONE button  
until you reach the idle display.  
OK  
OK  
Press the OK options button.  
Delete List?is displayed.  
Press the OK options button.  
Press the RED PHONE button  
until you reach the idle display.  
BT Diverse Helpline – 08457 908 070  
20  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Extra directory  
To copy numbers shown in  
the redial list to the directory  
Your BT Diverse 5310 has an  
additional 10 name and number  
directory. It is recommended  
that this is used for special  
numbers i.e. doctor, dentist,  
takeaway numbers.  
Press the REDIAL options  
button.  
Press the DOWN navigation  
button to scroll to the number  
you want to copy.  
Press the EXTRA DIRECTORY  
button.  
MENU  
Press the MENU options  
button.  
The structure of this directory  
is the same as the main  
Press the DOWN navigation  
button until the display shows  
Copy to Directory.  
directory. You can follow the  
instructions starting on page 16  
for storing, dialling, viewing,  
editing and deleting these  
names and numbers.  
OK  
OK  
Press the OK options button.  
Press the OK options button  
again.  
Enter the name (for details,  
see page 16).  
Redial  
MENU  
OK  
Press the MENU options button.  
The display shows Save Entry.  
Your handset automatically saves the  
last 10 telephone numbers dialled into a  
redial list.  
Press the OK options button  
to confirm.  
To dial a number in the  
redial list  
Press the RED PHONE button  
until you reach the idle display.  
Press the REDIAL options  
button. The last number  
dialled will be displayed.  
Note  
To cancel any procedure, press the  
RED PHONE button until the display  
returns to idle.  
Press the DOWN navigation  
button to scroll through the  
redial list.  
Press the GREEN PHONE  
button to dial the number.  
BT Diverse Helpline – 08457 908 070  
21  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Paging and internal calls  
To delete a number from the  
redial list  
You can alert handset users that they  
are wanted, or locate a missing handset.  
Press the REDIAL options  
button.  
If you have multiple handsets  
registered to the base you can make  
internal calls between handsets.  
Press the DOWN navigation  
button to select the number  
for deletion.  
INT  
Press the INT options button.  
A list of all the handsets that  
are registered to the base are  
listed, you can select any of  
them.  
MENU  
Press the MENU options  
button.  
Press the DOWN navigation  
button until the display shows  
Delete Entry.  
Your handset is identified by  
INT 1  
<
.
OK  
Press OK to confirm deletion.  
Press the DOWN navigation  
button to highlight the  
handset you want to call and  
press the GREEN PHONE  
button.  
Press the RED PHONE button  
until you reach the idle display.  
Secrecy  
Or  
When on a call you can talk to someone  
in the same room, without your caller  
hearing.  
Press the handset number you  
want to call on the keypad.  
Or  
To switch secrecy on/off  
Select the Call Alloption  
to page all the handsets  
registered to the base and  
press the GREEN PHONE  
button.  
Call All  
During a call:  
INT  
Press the INT options button.  
The microphone is switched  
off. The caller hears musical  
tones.  
The line will be seized by the  
first handset user to answer  
the call.  
Press the RED PHONE button  
to return to the caller.  
BT Diverse Helpline – 08457 908 070  
22  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
To put an external call on hold  
Note  
while you make an internal call  
You can also page all handsets by  
pressing the PAGE button on the base  
station.  
This enables you to ask another  
handset user a question and  
then get straight back to your  
caller.  
To transfer an external call  
between handsets  
During a call:  
INT  
Press the INT options button  
You can forward an external  
call to another handset  
registered to the base.  
to display the list of handsets.  
Your caller hears musical  
tones.  
During an external call:  
Press the UP or DOWN  
navigation button to select the  
handset you want to call.  
INT  
Press the INT options button  
to display the list of handsets.  
Your caller hears musical  
tones.  
Or  
Press the handset number you  
want to call on the keypad.  
Press the UP or DOWN  
navigation button to select the  
handset you want to call or  
Call all handsets.  
Press the GREEN PHONE  
button to call.  
Press the GREEN PHONE  
options button to call. When the  
other handset answers you can  
tell them you are transferring  
the call.  
You can now speak with the  
other handset user.  
To return to your  
external caller:  
MENU Press the MENU button and  
Press the RED PHONE button  
to put the call through.  
Backwill be displayed.  
OK  
Select the OK options button  
which will reconnect you to  
the external call.  
Note  
You can also put the call through  
without announcing it by immediately  
pressing the RED PHONE button after  
dialling the other handset.  
BT Diverse Helpline – 08457 908 070  
23  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
To answer a waiting call  
during an internal call  
If you are making an internal  
call and hear the Call Waiting  
tone you can immediately take  
the incoming call.  
MENU  
Press the MENU button.  
To accept Call Waiting, press  
the OK options button.  
OK  
Or  
To reject Call Waiting, press  
the DOWN navigation button.  
The display shows reject  
Call Waiting.  
OK  
Press the OK options button.  
Note  
If you accept Call Waiting you will  
automatically terminate your  
internal call.  
BT Diverse Helpline – 08457 908 070  
24  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Caller Display and other  
BT Calling Features  
IMPORTANT  
Note  
To use Caller Display and Call Waiting  
you must first subscribe to the Services  
from your Network Provider. For more  
information on BTs Calling Features  
call BT free on 0800 800 150.  
Calls that are withheld, unavailable’  
or internationalare not stored in the  
Calls list, as there is no telephone  
number sent via the Network.  
Calls list  
If you subscribe to a Caller Display  
Service you can see who is calling you  
on your handset display, as well as the  
date and time of their call (unless the  
number has been withheld).  
The Calls list contains the telephone  
numbers of your last 10 callers.  
Whether you take a call or not, the  
callers details are stored in the Calls  
list. You can display, scroll through and  
dial numbers in the list and copy them  
into the directory.  
If you have stored a name to go with  
the number in your handset directory,  
the name will be displayed as well.  
Please ensure that you have stored the  
full telephone number, including the area  
code, otherwise the name will not match  
the number stored in the directory.  
If a call is received when the Calls list  
is full then the oldest entry will be  
deleted automatically.  
If the caller has withheld their number,  
the display will show WITHHELD.  
The  
button lets you open:  
If you call from another internal  
handset, the display shows the handset  
number and INT.  
Text messages (SMS).  
Network Mailbox.  
Calls list.  
Note  
If you have a new call in your Calls  
list, the  
icon will flash on the  
handset display.  
BT Diverse Helpline – 08457 908 070  
25  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
To call the number:  
To view the Calls list  
Press the GREEN PHONE  
button. The number displayed  
is dialled.  
When you have new calls, the  
icon flashes in the display.  
Press the ENVELOPE button.  
To display the date and time  
the call was received:  
Press the DOWN navigation  
button until the display shows,  
e.g. Calls List: 03+07.  
MENU  
Press the MENU options  
button.  
In this example, you have  
received 3 new calls and you  
have 7 old calls (calls you have  
already viewed).  
Press the DOWN navigation  
button until the display shows  
Date and Time.  
OK  
OK  
Press the OK options button.  
OK  
Press the OK options button to  
display the most recent number  
that called you.  
The date and time of the call  
are displayed.  
Press the OK options button to  
return to the Calls list.  
Press the UP or DOWN  
navigation button to display  
all your new calls, followed by  
all your old calls.  
To display the status of the call:  
MENU Press the MENU options  
button.  
Note  
Press the DOWN navigation  
button until the display shows  
Status.  
To exit the Calls list at any time,  
press the RED PHONE button until  
you reach the idle display.  
OK  
Press the OK options button.  
WHEN A CALLS LIST ENTRY  
IS DISPLAYED YOU HAVE THE  
FOLLOWING OPTIONS:  
The display shows whether the  
call is a New Callor an Old  
Calland the number of the  
call in the Calls list, e.g. 01/10–  
the first call in a list of ten.  
OK  
Press the OK options button to  
return to the Calls list.  
BT Diverse Helpline – 08457 908 070  
26  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
To copy a number from the  
To delete the whole Calls list:  
Calls list to the directory:  
MENU  
Press the MENU options  
MENU  
Press the MENU options  
button.  
button.  
Press the DOWN navigation  
button until the display shows  
Delete List.  
Press the DOWN navigation  
button until the display shows  
Copy to Directory.  
OK  
Press the OK options button.  
OK  
OK  
Press the OK options button.  
The number is displayed.  
Press the OK options button.  
The display shows Calls list  
empty!  
Press the RED PHONE button  
until you reach the idle display.  
The display shows  
<Enter Name>.  
Enter the name of the person  
using the keypad.  
SMS (text messaging)  
MENU  
OK  
Press the MENU options  
button.  
For instructions on using the SMS  
functionality, please refer to the separate  
Using SMS user guide.  
The display shows Save Entry.  
Press the OK options button.  
Entry Savedis displayed.  
Network Mailbox  
The display automatically  
returns to show the Calls list.  
By pressing the  
button you can  
also access your network mailbox facility  
whether it is behind a switchboard or  
via 1571.  
To delete a call from the  
Calls list:  
MENU  
Press the MENU options  
For instructions on setting up and  
operating this function, please refer to  
page 31, To set one-touch access to your  
messages.  
button.  
The display shows  
Delete Entry.  
OK  
Press the OK options button.  
The display shows Entry has  
been deleted!  
The display then shows the  
next Calls list entry.  
BT Diverse Helpline – 08457 908 070  
27  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Call Waiting  
Other BT Calling Features  
If you also subscribe to a Call Waiting  
Service, when you are on a call and  
another person tries to call you, the  
second callers number will appear on  
the handset display and you will hear  
an intermittent beep through the  
handset. This is to alert you to the  
other caller waiting to speak to you.  
Your BT Diverse 5300 handset helps you  
use your Networks special services. For  
full details ask your Network provider.  
Options before you make a call  
Before making a call you can:  
Withhold your number from being  
sent for one call.  
Switch Call Waiting on/off.  
Switch off Ring Back.  
Divert all calls to another number  
(must be subscribed to).  
To accept a waiting call  
To withhold your number  
from being sent  
During a call when you hear  
the Call Waiting beeps:  
The number (and name if  
stored in the directory) of the  
second caller will appear on  
the display.  
Your number appears on the  
display of the person you call.  
You can withhold it from the  
next call.  
MENU  
Press the MENU options  
button.  
MENU  
Press the MENU options button.  
Press the DOWN navigation  
button until the display shows  
Select Services.  
Display shows Accept Call  
Waiting.  
OK  
OK  
Press the OK options button.  
Press the OK options button.  
The display shows Withhold  
Number.  
Press the UP or DOWN  
navigation buttons to toggle  
between callers.  
OK  
Press the OK options button.  
Enter the telephone number  
you want to call.  
OK  
Press the OK options button  
to dial.  
The number is dialled and your  
number is withheld for this call.  
BT Diverse Helpline – 08457 908 070  
28  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
To switch Call Waiting on/off  
Ring Back Off  
You can choose whether to have  
your Call Waiting service  
If you make a call and the  
number is engaged you can  
set your telephone to ring you  
back once the number is free  
by pressing 5. If you want to  
cancel this request i.e. if you  
have to go out before the call  
rings back.  
switched on or off depending on  
what you are doing i.e. if you  
are using the Internet via your  
PC and do not want Call Waiting  
to interrupt you.  
jkl  
5
MENU  
Press the MENU options button.  
MENU  
OK  
Press the MENU button.  
Press the DOWN navigation  
button until the display shows  
Select Services.  
Display shows Select  
Services.  
OK  
Press the OK options button.  
Press the OK options button.  
Press the DOWN navigation  
button until the display shows  
For All Calls.  
Press the DOWN navigation  
button until Cancel Ringback  
is displayed.  
OK  
Press the OK options button.  
You will hear a Network  
message confirming your  
divert request.  
Press the DOWN navigation  
button until display shows  
Call Waiting.  
OK  
Press the OK options button.  
OK  
Press the OK options button.  
Press the RED PHONE button  
until you reach the idle display.  
Press the DOWN navigation  
button to choose between On  
or Off.  
OK  
Press the OK options button.  
Press the RED PHONE button  
until you reach the idle display.  
BT Diverse Helpline – 08457 908 070  
29  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Press the UP or DOWN  
To set Call Divert  
navigation button to display  
the option you want All Calls,  
NoAnsweror WhenBusy.  
Note  
OK  
OK  
OK  
Press the OK options button  
again.  
Call Divert requires subscription  
from your Network provider. You  
may be charged a subscription fee.  
Select Onor Off.  
Press the OK options button.  
You can divert all incoming  
calls to another number where  
you can be reached.  
Enter the telephone number  
you want your calls diverted to.  
Press the OK options button.  
You can divert calls:  
You will hear a Network  
message confirming your  
divert request.  
All callscalls are put  
straight through to the number  
you have set.  
No answercalls are  
forwarded if your phone is  
not answered.  
Press the RED PHONE button  
until you reach the idle display.  
When busycalls are  
forwarded if your phone is  
engaged.  
MENU  
Press the MENU options button.  
Press the DOWN navigation  
button until the display shows  
Select Serviceshighlighted.  
OK  
Press the OK options button.  
Press the DOWN navigation  
button until the display shows  
For All Calls.  
OK  
OK  
Press the OK options button.  
Display shows Call Divert.  
Press the OK options button  
again.  
BT Diverse Helpline – 08457 908 070  
30  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Additional features  
To set up quick access to  
Voice Mail  
your Voice Mail service when  
behind a switchboard e.g.  
Meridian Mail  
If you have Call Minder or a Network  
Messaging Service on your telephone  
line you can set the 1 button to access  
your messages.  
Follow the steps previously  
given, but when you come to  
enter the telephone number of  
your messaging service, you  
will need to follow the example  
below:  
To set one-touch access to  
your messages  
MENU  
Press the MENU options button.  
Enter the access number for  
your messaging service,  
e.g. 7000.  
Press the DOWN navigation  
button until the display shows  
Voice Mail.  
Press and hold the RECALL  
R
OK  
Press the OK options button.  
button until Pis displayed to  
enter a pause in the dialling  
sequence.  
The display shows Set Key 1.  
OK  
Press the OK options button.  
Enter your extension number,  
followed by a hash, e.g. 1234 #.  
The display shows Network  
Mailbox.  
Press and hold the RECALL  
R
OK  
Press the OK options button.  
button until Pis displayed to  
enter another pause in the  
dialling sequence.  
Enter the telephone number  
of your messaging service.  
For example, 1571 to access the  
BT Answervoice mail service.  
Enter your PIN followed by a  
hash, e.g. 000000 #.  
OK  
Press the OK options button.  
Display shows Entry Saved.  
The entire number should  
look like this:  
Press the RED PHONE button  
7000P1234#P000000#  
until you reach the idle display.  
BT Diverse Helpline – 08457 908 070  
31  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
OK  
Press the OK options button.  
Note  
Press the RED PHONE button  
until you reach the idle display.  
If your handset is registered to an  
answering machine base i.e.  
BT Diverse 5350 you will be given the  
choice of accessing your answering  
machine messages or Network  
Messaging Service. See your  
BT Diverse 5350 user guide for further  
information.  
Note  
If you store your security PIN as part  
of the quick access number, anyone  
with access to the handset will be able  
to retrieve your messages.  
To retrieve messages from  
your Voice Mail service  
Press and hold down the  
1 button or access your network  
1
mailbox via the  
button.  
When set up it will take you into  
your message service. If during  
the set up you entered your  
security PIN as well as the  
telephone number you will be  
taken quickly into your  
messages. If the security PIN  
was not included you will have  
to enter this number now,  
followed by a  
.
#
You will then be taken into  
your messages.  
Press the RED PHONE button  
until you reach the idle display.  
BT Diverse Helpline – 08457 908 070  
32  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Handset settings  
You can choose a range of settings to suit your  
personal preferences.  
Press the LEFT or RIGHT  
navigation button to set the  
volume level you want.  
To change the earpiece volume  
and handsfree volume  
OK  
Press the OK options button to  
confirm and save the settings.  
You can choose from:  
3 earpiece volume levels  
5 handsfree loudspeaker  
volume levels.  
Press the RED PHONE button  
until you reach the idle display.  
MENU  
Press the MENU options button.  
To set the ringer volume  
and melody  
Press the DOWN navigation  
button until the display shows  
Audio Settings.  
You can choose from:  
OK  
OK  
Press the OK options button.  
5 ringer volumes (original  
setting = 3)  
Crescendo ring (increasing  
volume)  
Ringer off  
10 ringer melodies  
The display shows Earpiece  
Volume.  
Press the OK options button.  
You hear the current earpiece  
volume.  
MENU  
Press the LEFT or RIGHT  
navigation button to set the  
volume level you want.  
Press the MENU options button.  
Press the DOWN navigation  
button until the display shows  
Audio Settings.  
OK  
OK  
Press the OK options button.  
OK  
OK  
Press the DOWN navigation  
button to select the handsfree  
volume.  
Press the OK options button.  
Press the DOWN navigation  
button until the display shows  
Ringer Volume.  
Press the OK options button.  
You hear the current handsfree  
volume.  
Press the OK options button.  
You hear the current ringer  
volume.  
BT Diverse Helpline – 08457 908 070  
33  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Press the LEFT or RIGHT  
navigation button to set the  
ringer level you want.  
To change the display  
language  
OK  
Press the OK options button.  
MENU  
Press the MENU options button.  
Press the DOWN navigation  
button to select the ringer  
melody.  
Press the DOWN navigation  
button until the display shows  
Handset Settings.  
OK  
OK  
Press the OK options button.  
OK  
OK  
OK  
Press the OK options button.  
Select whether external calls or  
internal calls:  
Press the DOWN navigation  
button until the display shows  
Language.  
Press the OK options button.  
Press the UP or DOWN  
navigation button to set the  
ringer melody you want.  
The melody is played and its  
number shown.  
Press the OK options button.  
Press the DOWN navigation  
button to display the language  
you want.  
Press the OK options button  
to confirm.  
OK  
Press the OK options button to  
confirm and save the settings.  
Press the RED PHONE button  
until you reach the idle display.  
A
is displayed next to the  
Set melody.  
Press the RED PHONE button  
until you reach the idle display.  
Shortcut button  
If you want to switch the handset  
ringer off quickly you can also press  
and hold the  
button. The  
icon is displayed. To turn the handset  
ringer back on press and hold down  
the  
button again and the symbol  
will disappear.  
BT Diverse Helpline – 08457 908 070  
34  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Alarm clock  
Note  
The alarm will only sound if the  
handset is in idle mode. The alarm  
will not sound if the Room Monitor  
function is being used.  
You can use your handset as an alarm  
clock. You must set the date and time  
before the alarm will work. The alarm will  
ring daily until the setting is turned off.  
To set the alarm  
To stop the alarm ringing  
Press the ALARM CLOCK  
options button.  
When the alarm goes off it  
sounds like an incoming call  
and lasts for about 30 seconds.  
The display will also show  
< < < Alarm Clock > > >flashing.  
Display shows Alarm Clock.  
OK  
Press the OK options button.  
Display shows Enter alarm  
timeand the first digit of the  
time will be flashing.  
Press any button to switch the  
alarm off.  
Enter the time you want the  
alarm to go off at.  
To cancel the alarm setting  
OK  
Press the OK options button.  
The alarm will ring daily until  
you cancel the setting.  
Use the UP/DOWN navigation  
button to select am/pmif in 12  
hour mode.  
Press the ALARM CLOCK  
options button.  
OK  
Press the OK options button.  
Display shows Alarm Clock  
Display shows Entry Saved.  
with a  
above the OK  
options button.  
Press the RED PHONE button  
until you reach the idle display.  
OK  
Press the OK options button.  
The  
icon will be displayed  
You will hear a tone and the  
will disappear. Press the  
RED PHONE button until you  
reach the idle display.  
in the top right of the handset  
display to indicate that the  
alarm has been set.  
The  
icon will have  
disappeared from the top of  
the handset display.  
BT Diverse Helpline – 08457 908 070  
35  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
OK  
Press the OK options button.  
Appointment call  
Display shows <Enter Text>.  
You can use your handset to remind  
yourself of an appointment. You can set  
the time and date of the appointment  
and enter a name for it. The alarm will  
ring on the time and date you have set.  
Enter a name for the  
appointment, e.g. Dentist,  
using the keypad letters.  
OK  
Press the OK options button.  
Display shows Entry Saved.  
Press the RED PHONE button  
to return to the idle display.  
To set the appointment call  
The  
icon will be displayed  
MENU  
Press the MENU options  
button.  
in the top right of the handset  
display to indicate that the  
appointment has been set.  
Press the DOWN navigation  
button until the display shows  
Calender/Clock.  
Note  
OK  
Press the OK options button.  
Your handset will only display an  
appointment if the handset is in idle  
mode. An appointment will not be  
displayed if the Room Monitor function  
is being used or if a call is in progress.  
Display shows Set Appointment.  
OK  
Press the OK options button.  
Display shows Enter Date:  
and the first digit is flashing.  
Enter the day and month of  
the appointment, e.g . for 20th  
May enter 20.05.  
OK  
Press the OK options button.  
Display shows Enter Time:  
and the first digit is flashing.  
Enter the hours and minutes  
of the appointment.  
OK  
Press the OK options button.  
Use the UP/DOWN navigation  
button to select am/pmif in 12  
hour mode.  
BT Diverse Helpline – 08457 908 070  
36  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
To stop the appointment call  
alarm ringing  
To switch off your handset’s  
beeps and tones  
When the alarm goes off it  
You can switch off and on:  
sounds like an incoming call  
and lasts for about 30 seconds.  
The display will also flash the  
name of the appointment.  
Key beeps when you press  
each button on your handset  
Confirmation beeps when you  
have finished making a setting  
or action on your handset.  
Battery Low warning beep.  
You can also set this to sound  
only during a call.  
OK  
Press the OK options button to  
switch the alarm off.  
MENU  
Press the MENU options button.  
To cancel a set  
appointment call  
Press the DOWN navigation  
button until the display shows  
Audio Settings.  
MENU  
Press the MENU options  
OK  
Press the OK options button.  
button.  
Press the DOWN navigation  
button until the display shows  
Advisory Tones.  
Press the DOWN navigation  
button until the display shows  
Calender/Clock.  
OK  
OK  
Press the OK options button.  
OK  
OK  
Press the OK options button.  
Press the OK navigation  
button to switch the key tones  
On or Off.  
Display shows Set Appointment  
with a  
underneath it.  
Press the OK options button.  
Press the DOWN navigation  
button to move to the next line.  
You will hear a tone and the  
will disappear to indicate  
that the appointment has been  
cancelled.  
OK  
OK  
Press the OK options button.  
Press the UP or DOWN  
navigation button to switch the  
battery low beep On or Off or to  
sound only during a call.  
Press the RED PHONE button  
until you reach the idle display.  
Press the OK options button to  
confirm the settings.  
The  
icon will have  
disappeared from the top of  
the handset display.  
Press the RED PHONE button  
until you reach the idle display.  
BT Diverse Helpline – 08457 908 070  
37  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
To switch auto talk on or off  
To reset a handset  
When you receive a call, you  
can answer it simply by lifting  
the handset off the base station.  
This is called auto-talk. When  
you switch auto-talk off, you  
answer all calls by pressing  
the GREEN PHONE button.  
You can restore a handset to  
its factory settings.  
The handsets Registration,  
the Directory and the Calls list  
are not affected.  
MENU  
Press the MENU options button.  
MENU  
Press the MENU options button.  
Press the DOWN navigation  
button until the display shows  
Handset Settings.  
Press the DOWN navigation  
button until the display shows  
Handset Settings.  
OK  
Press the OK options button.  
OK  
OK  
Press the OK options button.  
Press the DOWN navigation  
button until the display shows  
Reset Handset.  
The display shows Auto  
Answer.  
OK  
OK  
Press the OK options button.  
Press the OK options button.  
A
indicates auto talk is  
The display shows reset to  
default?  
switched on. Press the OK  
options button again to switch  
auto-talk off.  
Press the OK options button to  
confirm reset.  
Press the RED PHONE button  
until you reach the idle display.  
The settings after a reset will be:  
Ringer volume  
Ringer melody  
Auto talk  
3
1
On  
Battery low beep  
Room monitor level  
Room monitor level  
Time control  
On  
off  
high  
off  
Display language  
Redial list  
English  
deleted  
Press the RED PHONE button  
until you reach the idle display.  
BT Diverse Helpline – 08457 908 070  
38  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
OK  
Press the OK options button.  
Press the C options button  
To switch keyguard on and off  
C
to delete the old name.  
You can lock the keypad so that  
it cannot be used accidentally  
while carrying it around.  
Enter the name you want (see  
page 16).  
OK  
Press the OK options button to  
confirm.  
Press and hold the button.  
#
When the keyguard is  
Press the RED PHONE button  
switched on, the display will  
until you reach the idle display.  
show the  
icon.  
Press and hold the button to  
#
switch the keyguard off.  
Note  
This name will only appear in the  
internal list of handsets.  
To give a handset a name  
rather than a number  
The handsets when registered  
are assigned numbers e.g. INT1.  
You can give the handset a  
name instead of a number to  
match the user or location,  
e.g. Anneor Office.  
To change the internal number  
of a handset  
Your handsets are automatically  
assigned internal numbers  
between 1-6. You can change  
these numbers.  
The name can be up to 10  
characters long.  
INT  
Press the INT options button  
INT  
Press the INT options button  
to enter the internal call menu.  
to display the list of handsets.  
Press the UP or DOWN  
navigation button to select the  
handset you want.  
Press the UP or DOWN  
navigation button to select the  
handset you want to change  
the name or number of.  
Press the MENU options  
button.  
MENU  
OK  
Press the DOWN navigation  
button to display Change  
Handset Name.  
Edit Handset No. is displayed.  
Press the OK options button.  
BT Diverse Helpline – 08457 908 070  
39  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
The handsets are registered to  
different bases but are both set to  
Best Base.  
Enter an available number.  
If the number is already  
assigned to another handset  
you hear a beep. Select another  
number.  
One of the handsets is not registered  
and the other handset is registered as  
Best Base.  
If required, press the UP or  
DOWN navigation button to  
select another handset and use  
the Keypad to change the  
number.  
Neither handset is registered.  
To switch walk and talk mode  
on and off  
OK  
Press the OK options button  
to confirm.  
To switch walk and talk on:  
Press the RED PHONE button  
until you reach the idle display.  
MENU  
Press the MENU options  
button.  
Press the DOWN navigation  
button until the display shows  
Additional Features.  
Walk and talk  
OK  
Press the OK options button.  
If you have more than one Diverse 5000  
handset then you can use the walk and  
talk mode. This allows two handsets to  
communicate with each other outside  
the range of the base station. When they  
are out of range, however, they cannot  
receive external calls. The maximum  
range between the communicating  
handsets is 300 metres outdoors in  
ideal conditions. Please note that  
batteries are used more quickly in walk  
and talk mode.  
Display shows Room Monitor.  
Press the DOWN navigation  
button until the display shows  
Walk and Talk.  
OK  
Press the OK options button.  
You will hear a tone and the  
display will show Walk and Talk.  
To switch walk and talk off:  
MENU  
Press the MENU options  
button.  
Communication between two handsets is  
possible when:  
Display shows Walk and Talk  
Off.  
Both handsets are registered to the  
same base and have currently  
selected that base.  
OK  
Press the OK options button.  
The display will return to the  
idle screen.  
BT Diverse Helpline – 08457 908 070  
40  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Room monitor  
To use walk and talk  
You can use a handset as a room monitor.  
If a certain noise level is reached, for  
example a baby crying, the handset will  
automatically dial an internal or external  
number which you have set.  
To call a handset:  
When you have switched walk  
and talk mode on for at least  
two handsets as shown on  
page 40:  
The following points should be considered  
when using the room monitor:  
Press the GREEN PHONE  
button.  
If you store an external number that  
has an answering machine connected,  
it should be switched off.  
Display will show Walk and Talk  
Call to all  
All handsets that are in walk  
and talk mode will be called.  
The connection will be made  
with the first handset to  
Make sure Call barring is not set.  
Any incoming calls on the handset  
being used as the room monitor will  
not ring at the handset, however,  
the display will show when you have  
a call.  
answer the walk and talk call.  
To answer a call:  
Press the GREEN PHONE  
button to take the call.  
The battery power is used up more  
quickly. If using for long periods of  
time it may be advisable to place the  
handset in the base to ensure that the  
battery does not run out.  
To end a call:  
Press the RED PHONE button.  
When an external number is called it  
will ring for approximately 90 seconds  
but room monitor calls to an internal  
number are unlimited.  
BT Diverse Helpline – 08457 908 070  
41  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
To enter an external or  
internal number for your  
room monitor call  
To set the room monitor  
sensitivity level  
MENU  
Press the MENU options  
button.  
MENU  
Press the MENU options  
button.  
Press the DOWN navigation  
button until the display shows  
Additional Features.  
Press the DOWN navigation  
button until the display shows  
Additional Features.  
OK  
OK  
OK  
OK  
Press the OK options button.  
Display shows Room Monitor.  
Press the OK options button.  
Press the OK options button.  
Display shows Room Monitor.  
Press the OK options button.  
Display shows Call  
Internal  
Press the DOWN navigation  
button until the display shows  
Level.  
Either:  
To enter an internal number:  
OK  
OK  
Press the OK options button.  
OK  
OK  
Press the OK options button.  
Use the UP/DOWN navigation  
button to select either Lowor  
High.  
Enter the internal handset  
number.  
Press the OK options button.  
Or:  
Press the OK options button.  
A
will be displayed to  
indicate that the level has  
been set.  
To enter an external number:  
Press the DOWN navigation  
button to scroll to Call  
External  
Press the RED PHONE button  
until you reach the idle display.  
OK  
and press the OK options  
button.  
Display shows <Enter Number>  
Enter the telephone number.  
Display shows Entry Saved  
and then Room Monitor set to:  
with the last four digits of the  
telephone number.  
BT Diverse Helpline – 08457 908 070  
42  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
To switch the room  
monitor off  
MENU  
Press the MENU options  
button.  
Display will show  
Room Monitor off.  
OK  
Press the OK options button.  
To switch the room monitor  
off from another phone  
When you are called by the  
room monitor you can switch  
off the room monitor from  
that phone.  
Answer the call.  
Press the 9 and button.  
The room monitor will be  
switched off.  
9wxyz  
#
Note  
The other room monitor functions,  
e.g. no ringer will remain until you  
press the MENU options button and OK  
options button on the handset that is  
set to room monitor.  
BT Diverse Helpline – 08457 908 070  
43  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Base station settings  
OK  
Press the OK options button to  
save the new PIN.  
Base station PIN (Personal  
Identification Number)  
Press the RED PHONE button  
until you reach the idle display.  
Your base station PIN has a default  
setting of 0000 but you may want to  
change this to prevent unauthorised use  
of the handset(s).  
To reset the base  
If you change your PIN keep a record of  
the new number by writing it in the  
space provided on page 8.  
You can restore a base station  
to its factory settings.  
Resetting the base will not affect  
the system PIN or handset  
registration.  
MENU  
Press the MENU options button.  
To change the base station PIN  
Press the DOWN navigation  
button until the display shows  
Base Settings.  
MENU  
Press the MENU options button.  
Press the DOWN navigation  
button until the display shows  
Base Settings.  
OK  
Press the OK options button.  
Press the DOWN navigation  
button until the display shows  
Base Reset.  
OK  
Press the OK options button.  
Select System PIN.  
OK  
OK  
OK  
Press the OK options button.  
OK  
Press the OK options button.  
Enter the current PIN  
(original setting = 0000.)  
Enter the current PIN  
(original setting = 0000).  
Press the OK options button.  
OK  
Press the OK options button.  
Display shows reset to  
default?  
Enter the new PIN.  
OK  
Press the OK options button.  
Press the OK options button to  
confirm reset.  
Repeat the new PIN to confirm.  
BT Diverse Helpline – 08457 908 070  
44  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
The settings after a reset will be:  
Calls list deleted  
Handset names INT 1- INT 6  
To set repeater mode  
You can extend the range of  
your base station by purchasing  
a BT Diverse repeater. This  
boosts the signal and allows  
you to use your handset  
Dialling mode  
Flash time  
Prefix  
tone  
100ms  
deleted  
3secs  
Pause after prefix  
SMS provider Pre-set number  
further away from the base  
station. If you want to use a  
BT Diverse repeater, you must  
switch this mode on.  
number  
switched on  
SMS incoming  
and outgoing lists  
Voice mail  
deleted  
deleted  
MENU  
Press the MENU options button.  
Press the RED PHONE button  
until you reach the idle display.  
Press the DOWN navigation  
button until the display shows  
Base Settings.  
Note  
Press the OK options button.  
OK  
OK  
The  
icon beside Repeater mode  
shows that it is ON.  
Press the DOWN navigation  
button until the display shows  
Additional Features.  
Press the OK options button.  
Press the DOWN navigation  
button until the display shows  
Repeater Mode.  
OK  
OK  
Press the OK options button.  
Display shows Change  
repeater setting.  
Press the OK options button.  
The message states Please  
wait. The phone will return  
to the main idle screen  
automatically.  
BT Diverse Helpline – 08457 908 070  
45  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Using additional  
handsets and bases  
Up to six handsets can be registered  
Registering additional  
handsets  
and operated from the BT Diverse 5310  
base station. This allows you to make  
an internal call between two handsets  
while a third is making an external call.  
If you purchase new handsets to use  
with your current BT Diverse 5310,  
they will not be pre-registered to a base  
station. You will need to do this before  
you can use them.  
1
1
INT  
MENU  
INT  
MENU  
1
4
3 def  
6 mno  
9wxyz  
abc  
1
4
3 def  
6 mno  
9wxyz  
2
5
8
0
abc  
2
5
8
0
ghi  
jkl  
ghi  
jkl  
7pqrs  
tuv  
7pqrs  
tuv  
+
+
R
R
To register a new BT Diverse  
5300 handset to a 5310 base  
station  
BT Diverse 5310  
1
1
INT  
MENU  
INT  
MENU  
1
4
3 def  
6 mno  
9wxyz  
1
4
3 def  
6 mno  
9wxyz  
abc  
abc  
2
5
8
0
2
5
8
0
ghi  
ghi  
jkl  
jkl  
For this method of registration  
your handset must be a  
BT Diverse 5300.  
7pqrs  
7pqrs  
tuv  
tuv  
+
+
R
R
Place your handset in the base  
station.  
1
1
INT  
MENU  
INT  
MENU  
Ensure that the handset is  
switched on.  
1
4
3 def  
6 mno  
9wxyz  
1
4
3 def  
6 mno  
9wxyz  
abc  
abc  
2
5
8
0
2
5
8
0
ghi  
ghi  
jkl  
jkl  
7pqrs  
7pqrs  
tuv  
tuv  
+
+
R
R
After about 1 minute, the  
handsets internal number will  
be displayed, e.g. INT 2.  
Each handset can only be registered  
with one base at a time.  
The next available internal  
number (2-6) has been  
automatically assigned to the  
handset.  
BT Diverse Helpline – 08457 908 070  
46  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
If the base station is a  
Note  
BT Diverse 5310 or 5350 base  
press the PAGE button for  
approximately three seconds.  
If all internal numbers have been  
assigned then the internal number 6  
will be re-assigned.  
After approximately one minute  
the handset will display its  
internal number. The handset  
is now registered and the  
handset display will return to  
the idle screen.  
You can change the internal handset  
number if you wish, see page 39.  
To manually register a  
BT Diverse 5300 handset to  
another base station  
If the base is not a 5310 or  
5350 you will need to follow  
the user guide for the base  
station you are registering the  
5300 handset to.  
If you want to register your  
handset to another base station  
you will need to manually  
register it.  
Note  
To make internal calls or page  
handsets, see page 22.  
On the handset to be registered:  
MENU  
Press the MENU options button.  
Press the DOWN navigation  
button until the display shows  
Handset Settings.  
OK  
Press the OK options button.  
Press the DOWN navigation  
button until the display shows  
Register Handset.  
OK  
Press the OK options button.  
Enter system PIN.  
OK  
Press the OK options button.  
BT Diverse Helpline – 08457 908 070  
47  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
To register BT Diverse 2000/  
3000/4000 series handsets  
and other makes  
To de-register a handset  
INT  
Press the INT navigation  
button to display the list of  
internal handsets registered  
to the base.  
Providing your handset is  
GAP (Generic Access Profile)  
compliant, you can register it  
to your BT Diverse 5310 base.  
Press the UP or DOWN  
navigation button to select the  
handset you want to de-register.  
Place your handset into  
registration mode according  
to the instructions in its user  
guide.  
MENU  
Press the MENU options button.  
Press the DOWN navigation  
button until the display shows  
De-register Handset.  
When the handset is in  
registration mode, you will  
need to press the PAGE button  
located on the top of your  
BT Diverse 5310 base station,  
for approximately three  
seconds. After a short period  
of time the handset will be  
registered. The BT Diverse  
5310 will allocate the next  
available handset number.  
OK  
OK  
OK  
Press the OK options button.  
Enter the base station PIN  
(original setting = 0000).  
Press the OK options button.  
Display shows de-register  
handset?  
Press the OK options button  
to confirm de-registration.  
Press the RED PHONE button  
Note  
to return to the idle screen.  
To check that the handset has  
registered successfully to the base,  
press the PAGE button, all handsets  
will ring.  
BT Diverse Helpline – 08457 908 070  
48  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Help  
Try these solutions to the most common problems.  
Problem  
Possible cause  
Solution  
Handset not registering.  
The base is not powered.  
There are no batteries in the  
handset.  
Make sure that the power supply  
is plugged in at the base and  
switched on. Make sure that the  
rechargeable batteries (included)  
are fitted in the handset correctly.  
Switch the handset off and then  
back on again, place the handset  
on to the base again and leave  
for approx. 1 minute to try  
registering again.  
If this is still unsuccessful, then try a  
manual registration (see page 47).  
You have forgotten your base  
station PIN number.  
You have changed the PIN.  
Try entering the default PIN (0000).  
If you have changed the PIN and  
cannot remember the number you  
will need to contact the BT Diverse  
Helpline on 08457 908070.  
No display.  
The handset is switched off.  
Keyguard may be switched on.  
Hold down RED PHONE for  
1 second.  
Charge or replace the batteries.  
Nothing happens when you press  
any button.  
Hold down the button for  
#
1 second.  
No connection between handset  
and base station.  
Are you out of range of the base  
station.  
Move closer to the base station.  
Handset is not registered.  
Register the handset.  
Base station is not switched on.  
Check the mains power is connected  
correctly.  
Handset on the base does not  
charge.  
Is the handset placed on the base  
properly?  
Make sure that the handset is placed  
on the base or in the charger correctly.  
You will hear a confirmation tone.  
Are the batteries in correctly?  
Check that you have put the batteries  
in the right way, you will hear a  
confirmation tone.  
BT Diverse Helpline – 08457 908 070  
49  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Handset does not ring.  
The handset ringer may be  
switched off.  
Hold down to switch the ringer  
back on.  
The incoming caller’s number is  
not displayed even though you  
have Caller Display.  
The caller’s number has been  
withheld.  
Caller has to allow their number to  
be sent.  
You keep hearing the error beep  
(a descending tone).  
You have pressed the wrong  
button in a sequence.  
Check the prompts in the display  
or refer to instructions in the  
user guide.  
BT Diverse Helpline – 08457 908 070  
50  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
General information  
Within the 12-month guarantee period:  
Guarantee  
If you experience difficulty using the  
product, prior to returning your  
product, please read the Help section  
beginning on page 49, or contact the  
BT Diverse Helpline on 08457 908070  
for assistance.  
Your BT Diverse 5310 is guaranteed for  
a period of 12 months from the date of  
purchase.  
Subject to the terms listed below the  
guarantee will provide for the repair of,  
or at BTs or its agents discretion the  
option to replace the BT Diverse 5310,  
or any component thereof, (other than  
batteries), which is identified as faulty  
or below standard, or as a result of  
inferior workmanship or materials.  
Products over 28 days old from the  
date of purchase may be replaced with  
a refurbished product.  
In the unlikely event of a defect  
occurring, please follow the Helplines  
instructions for replacement or repair.  
Outside the 12-month guarantee period:  
If your product needs repair after the  
guarantee period has ended, the repair  
must meet the approval requirements  
for connection to the telephone network.  
We recommend that you call the Helpline  
on 08457 908070 and ask for details  
of our recommended repair agents.  
The conditions of this guarantee are:  
The guarantee shall only apply to  
defects that occur within the 12  
month guarantee period.  
BT Accessories and  
Replacement Items  
Proof of purchase is provided.  
The equipment is returned to BT or  
its agent as instructed.  
For a full range of accessories and  
replacement items for BT products  
please call 0870 240 5522,  
or visit:  
This guarantee does not cover any  
faults or defects caused by accidents,  
misuse, fair wear and tear, neglect,  
tampering with the equipment, or  
any attempt at adjustment or repair  
other than through approved agents.  
This guarantee does not affect your  
statutory rights.  
BT Diverse Helpline – 08457 908 070  
51  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Technical information  
Switchboard compatibility  
How many telephones can you have on  
the line?  
Generally this telephone may be  
connected to switchboards. In the event  
of any difficulties please consult your  
switchboard Service Provider.  
All items of equipment have a Ringer  
Equivalence Number (REN) which is  
used to calculate the number of items  
that may be connected to any one  
telephone line.  
To set the dialling mode  
The BT Diverse 5310 (with up to 6  
handsets) has a total REN of 1.  
You need only adjust this  
setting if your switchboard does  
not operate with the pre-set  
tone dialling. You can change  
the dial mode to pulse dialling.  
Any other instrument provided by  
BT may be assumed to have a REN of  
1 unless stated otherwise.  
MENU  
Press the MENU options button.  
A total REN of 4 is allowed per telephone  
line. (For example: if the BT Diverse 5310  
is used in conjunction with three  
extension telephones, each with a REN  
of 1, then the total REN = 4)  
Press the DOWN navigation  
button until the display shows  
Base Settings.  
OK  
Press the OK options button.  
Only use approved power supply item  
code M-GA35-095130F.  
Press the DOWN navigation  
button until display shows  
Additional Features.  
R&TTE  
This product is intended for use within  
the UK for connection to the public  
telephone network and compatible  
switchboards.  
OK  
Press the OK options button.  
Display shows Dialling Mode.  
OK  
Press the OK options button.  
Press the DOWN navigation  
button to select:  
– Tone (with TBR)  
– Pulse (with Earth Recall)  
– Tone-Earth (tone with  
Earth loop recall)  
This equipment complies with the  
essential requirements for the Radio  
Equipment and Telecommunications  
Terminal Equipment Directive  
(1999/5/EC). In demonstration with  
the Essential Requirement for efficient  
use of the radio spectrum, the product  
complies with TBR6. For a copy of the  
Declaration of Conformity please  
contact the BT Diverse Helpline on  
08457 908070.  
OK  
Press the OK options button  
to confirm. The display shows  
Entry Saved.  
Press the RED PHONE button  
until you reach the idle display.  
BT Diverse Helpline – 08457 908 070  
52  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
To set the recall time  
To switch temporarily from  
pulse to tone dialling  
You need only adjust this setting  
if your switchboard requires a  
different recall time to the  
If you are using pulse dialling  
with your switchboard but  
need tone dialling to use  
pre-set recall time of 100ms.  
certain functions on your  
BT Diverse 5310 you can switch  
to tone dialling during the call.  
MENU  
Press the MENU options button.  
Press the DOWN navigation  
button until the display shows  
Base Settings.  
During your call:  
MENU  
Press the MENU options button.  
OK  
Press the OK options button.  
Press the DOWN navigation  
button until the display shows  
Tone dialling.  
Press the DOWN navigation  
button until the display shows  
Additional Features.  
OK  
Press the OK options button.  
Tone dialling is now active.  
OK  
Press the OK options button.  
Press the DOWN navigation  
button until the display shows  
Recall.  
Press the RED PHONE button  
until you reach the idle display.  
OK  
Press the OK options button.  
Note  
Press the DOWN navigation  
button to select the recall time  
80, 100, 120, 180, 250,  
300ms or 600ms.  
This setting is only for the duration of  
the call.  
OK  
Press the OK options button to  
confirm. The display shows  
Entry Saved.  
Press the RED PHONE button  
until you reach the idle display.  
Note  
100ms is the standard setting for most  
UK switchboards.  
BT Diverse Helpline – 08457 908 070  
53  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Setting pauses  
To set the duration of a pause  
Note  
You can set the length of a  
pause that is inserted after  
pressing the RECALL button.  
If you want to insert a pause into a  
telephone number you are storing in  
your directory, start storing the  
number (see page 16) and where a  
pause is needed press and hold the  
RECALL button, the pause is added  
and stored with the number.  
R
MENU  
Press the MENU options  
button.  
tuv  
8
Press the 8 button.  
Press the 9 button.  
Press the 1 button.  
Press the 2 button.  
Enter the pause length:  
9wxyz  
1
abc  
2
To set a pause before dialling  
You can insert a pause to allow  
your switchboard time to get  
a line before your BT Diverse  
5310 dials the number.  
1 = 800ms  
2 = 1600ms  
3 = 3200ms  
OK  
Press the OK options button to  
confirm the setting.  
Press the MENU options  
button.  
MENU  
tuv  
8
Press the 8 button.  
9wxyz  
Press the 9 button.  
1
Press the 1 button.  
1
Press the 1 button.  
Enter the number for the  
corresponding pause length  
(e.g. 4 for 6 seconds):  
1 = 1 second  
2 = 2 seconds  
3 = 3 seconds  
4 = 6 seconds.  
OK  
Press the OK options button  
to confirm the setting. Entry  
Savedis displayed.  
BT Diverse Helpline – 08457 908 070  
54  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Index  
dial a number from  
display status of call  
display time of call  
view  
26  
26  
26  
26  
Additional handset and bases  
Alarm clock  
Appointment call  
46  
35  
36  
38  
Auto talk on/off  
Calls  
end  
14  
14  
15  
23  
22  
14  
23  
15  
21  
22  
23  
23  
Base station PIN  
Base station reset  
Batteries  
44  
44  
external  
handsfree  
holding  
internal  
making  
on hold  
receiving  
redial  
charging  
installing  
performance  
replacing  
warning beeps  
12  
11  
12  
12  
12  
37  
13  
secrecy  
three-way  
transferring  
Beeps and tones  
Belt clip  
Character map  
17  
Call timer  
Call Waiting  
Caller Display  
Calling Features  
Call Divert  
14  
28  
25  
25  
30  
25  
25  
28  
29  
28  
31  
26  
26  
27  
27  
27  
Date set  
Delete  
13  
all directory numbers  
Calls list call  
complete Calls list  
directory entry  
redial list  
20  
27  
27  
20  
22  
48  
52  
Caller Display  
Calls list  
Call Waiting  
Ring Back  
withhold your number  
Voice Mail  
De-register handset  
Dialling mode  
Directory  
16  
17  
Calls list  
character map  
copy entry to another  
handset  
copy directory to another  
handset  
call the number  
copy to directory  
delete a call  
19  
20  
delete complete list  
BT Diverse Helpline – 08457 908 070  
55  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
delete all entries  
delete an entry  
dial a number  
20  
20  
18  
19  
21  
16  
18  
18  
Melody  
Music on hold  
33  
22  
On/off  
edit an entry  
auto talk  
38  
37  
14  
39  
22  
40  
extra directory  
store name and number  
view an entry  
beeps and tones  
handset power  
keyguard  
secrecy  
walk and talk  
VIP ringing  
Display icons  
7
Earpiece volume  
Ending calls  
External calls  
Extra directory  
33  
14  
14  
21  
Page a handset  
Pause  
Phone socket  
PIN  
Power connection  
Preparatory dialling  
Pulse dialling  
22  
54  
13  
44  
10  
14  
53  
Guarantee  
51  
Handset  
beeps and tones  
change internal number  
display icons  
melody  
37  
39  
7
33  
39  
14  
38  
33  
6
15  
49  
23  
Quick guide  
display icons  
handset settings  
7
6
naming  
on/off  
reset  
ringer  
Range warning  
Repeater mode set  
Recall time  
Receiving calls  
Redial  
12  
45  
53  
15  
21  
21  
22  
21  
Handset quick guide  
Handsfree  
Help  
copy to directory  
delete  
dial number in redial list  
Holding calls  
Registering  
additional handsets  
manually  
Internal calls  
Internal number change  
22  
39  
46  
47  
11  
your handset  
Keyguard  
39  
34  
REN, how many phones can I have? 52  
Reset  
Language change  
base settings  
handset settings  
44  
38  
Main menu  
4
Making calls  
14  
Room monitor  
41  
BT Diverse Helpline – 08457 908 070  
56  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Safety information  
Secrecy  
Setting up  
Switchboard compatibility  
9
22  
10  
52  
Technical information  
Telephone line cord  
Time set  
Tone dialling  
Transferring calls  
52  
13  
13  
53  
23  
VIP ringing  
18  
31  
32  
31  
Voice Mail  
retrieve messages  
set one-touch access  
set up quick access behind  
switchboard  
31  
Volume  
earpiece  
handset ringer  
handsfree  
33  
33  
15, 33  
Walk and talk  
40  
BT Diverse Helpline – 08457 908 070  
57  
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191  
Offices worldwide  
The telecommunications services described in this publication  
are subject to availability and may be modified from time to time.  
Services and equipment are provided subject to British  
Telecommunications plc’s respective standard conditions of  
contract. Nothing in this publication forms any part of any contract.  
© British Telecommunications plc 2003.  
Registered Office: 81 Newgate Street, London EC1A 7AJ.  
Registered in England No. 1800000.  
BT Diverse 5310 (06/03) 5  
Designed and produced by The Art & Design Partnership Ltd.  
0682  
Siemens number: A31008-C200-P101- -7619  
CE compliant to R&TTE Directive (1999/5/EC)  

Gateway HD1900 User Manual
Frigidaire FFGC3613LB User Manual
Electrolux ZCG5300 User Manual
Electrolux U20452 User Manual
Dell Professional P2010H User Manual
Datavideo TLM 700 User Manual
Daewoo DP SP20 User Manual
ClearOne comm Tabletop Conference Phones User Manual
Antec NINE HUNDRED TWO V3 User Manual
Aiphone TS 6K User Manual