MT276 Series
LCD Monitor
User’s Manual
Contents
Notices................................................................................................iv
1.3.1 Front view.......................................................................................... 12
1.3.2 Top view ............................................................................................ 13
1.3.3 Rear view........................................................................................... 15
3.1.1 How to reconfigure........................................................................... 22
ASUS MT276 Series LCD Monitor
iii
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
▪
▪
This device may not cause harmful interference, and
This device must accept any interference received including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with manufacturer’ s instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
▪
▪
▪
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
▪
Consult the dealer or an experienced radio/TV technician for help.
The use of shielding cables for connection of the monitor to the graphics
card is required to assure compliance with FCC regulations. Changes or
modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
As an Energy Star® Partner, our company has determined that this product meets
the Energy Star® guidelines for energy efficiency.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
iv
ASUS MT276 Series LCD Monitor
Safety Information
▪
Before setting up the monitor, carefully read all the documentation that came with
the package.
▪
▪
To prevent fire or shock hazard, never expose the monitor to rain or moisture.
Never try to open the monitor cabinet. The dangerous high voltages inside the
monitor may result in serious physical injury.
▪
▪
If the power supply is broken, do not try to fix it by yourself. Contact a qualified
service technician or your retailer.
Before using the product, make sure all cables are correctly connected and the
power cables are not damaged. If you detect any damage, contact your dealer
immediately.
▪
▪
Slots and openings on the back or top of the cabinet are provided for ventilation.
Do not block these slots. Never place this product near or over a radiator or heat
source unless proper ventilation is provided.
The monitor should be operated only from the type of power source indicated on
the label. If you are not sure of the type of power supply to your home, consult
your dealer or local power company.
▪
▪
Use the appropriate power plug which complies with your local power standard.
Do not overload power strips and extension cords. Overloading can result in fire
or electric shock.
▪
▪
Avoid dust, humidity, and temperature extremes. Do not place the monitor in any
area where it may become wet. Place the monitor on a stable surface.
Unplug the unit during a lightning storm or if it will not be used for a long period of
time. This will protect the monitor from damage due to power surges.
▪
▪
Never push objects or spill liquid of any kind into the slots on the monitor cabinet.
To ensure satisfactory operation, use the monitor only with UL listed computers
which have appropriate configured receptacles marked between 100-240V AC.
▪
If you encounter technical problems with the monitor, contact a qualified service
technician or your retailer.
This symbol of the crossed out wheeled bin indicates that the product
(electrical, electronic equipment, and mercury-containing button cell battery)
should not be placed in municipal waste. Please check regulations for
disposal of electronic products.
ASUS MT276 Series LCD Monitor
v
Care and Cleaning
▪
Before you lift or reposition your monitor, it is better to disconnect the cables and
power cord. Follow the correct lifting techniques when positioning the monitor.
When lifting or carrying the monitor, grasp the edges of the monitor.
Do not lift the monitor by the stand or the cord.
▪
▪
Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with
a cloth dampened with mild cleaner.
Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for
use with the LCD. Never spray cleaner directly on the screen, as it may drip
inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
▪
The screen may flicker during the initial use due to the nature of the fluorescent
light. Turn off the Power Switch and turn it on again to make sure that the flicker
disappears.
▪
▪
You may find slightly uneven brightness on the screen depending on the desktop
pattern you use.
When the same image is displayed for hours, an afterimage of the previous
screen may remain after switching the image. The screen will recover slowly or
you can turn off the Power Switch for hours.
▪
When the screen becomes black or flashes, or cannot work anymore, contact
your dealer or service centre to fix it. Do not repair the screen by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying
to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
vi
ASUS MT276 Series LCD Monitor
Where to find more information
Refer to the following sources for additional information and for product and software
updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS hardware
2. Optional documentation
Your product package may include optional documentation that may have been
added by your dealer. These documents are not part of the standard package.
ASUS MT276 Series LCD Monitor
vii
Recycling Place
EUROPE
When disposing of ASUS products in Europe, please contact one of the following
locations to make arrangements for recycling.
▪
ASUS France S.A.R.L.
10 allee bienvenue, 93160, noisy le grand, France
Tel:
+33 1 49 32 96 50
▪
ASUS COMPUTER GmbH (Germany)
Harkortstr. 21 – 23, 40880 Ratingen, Deutschland
Hotline: +49 01805 / 010920 ( Mo – Fr / 9 – 17h)
Fax:+49 2102 9599-11 (24h)
▪
▪
ASUSTeK Italy srl
Via Piero Gobetti 2/B Centro direzionale Villa Fiorita 20063 Cernusco sul
Naviglio (MI), Italy
Tel:
+39 199400089
Fax:
+39 02 20240555
ASUSTek UK Ltd.
1st Floor, Focus 31, West Wing, Mark Road, Hemel Hempstead, HP2 7BW, UK
Tel:
Fax:
+44 1442 202 700
+44 1442 245 882
▪
▪
ASUS IBERICA S.L.
C/ Plomo 5-7, 08038 Barcelona, Spain
Tel:
+34 902 889688
ASUS Nordic AB
Finlandsgatan 16, 4 Tr., 16474 Kista, Sweden
Tel:
Fax:
+46 8 5889 8900
+46 8 5889 8999
▪
ASUS Computer Benelux B.V.
Fultonbaan 12 3439 NE Nieuwegein The Netherlands
Tel:
Hotline: +31 (0)591-668190
Fax: +31 (0)591-666853
+31.30.60.22.452
▪
▪
▪
ASUS Computer Czech Republic S.R.O.
V Olsinach 2300/75, 10000 Prague, Czech Republic
Tel:
Fax:
+420 274 774 872
+420 274 774 889
ASUS Polska SP. Z.O.O.
Al. Jerozolimskie 200, 02-222 Warsaw 4 floor, Poland
Tel:
Fax:
+48 22 571 80 00
+48 22 571 80 01
ASUS Hungary Kft.
Tel:
Fax:
+36 1 505 45 61
+36 1 505 45 63
viii
ASUS MT276 Series LCD Monitor
NORTH AMERICA
When disposing of ASUS products in North America, please contact the following
locations to make arrangements for recycling.
ASUS COMPUTER INTERNATIONAL (America)
▪
US Headquarters:
800 Corporate Way, Fremont, CA 94539, USA
Tel:
Fax:
+1 510-739-3777
+1 510-608-4555
▪
Canada Branch Office:
802 Cochrane Dr., Unit 2, Markham ON, L3R 8C9, Canada
Tel:
Fax:
(905) 370-2787
(905) 489-2718
ASIA PACIFIC
When disposing of ASUS products in Asia Pacific, please contact the following
location to make arrangements for recycling.
▪
ASUSTeK COMPUTER INC.
No. 15, Li-Te Rd., Peitou, Taipei, Taiwan
Tel:
Hotline: +886-(0)800-093-456
Fax: +886-2-2895-9254
+886-2-2894-3447
“THIS UNIT IS AN ELECTRIC DEVICE WHICH MAY CONTAIN HAZARDOUS MATERIALS AND
COMPONENTS, AND WHICH MUST BE DISPOSED OF AT END OF LIFE ACCORDING TO THE
PROPER PROCEDURE”
ASUS MT276 Series LCD Monitor
ix
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
x
ASUS MT276 Series LCD Monitor
1.1 Welcome!
Thank you for purchasing the ASUS® MT Series Multifunction LCD Monitor!
The latest LCD monitor from ASUS provides a host of features that enhance your
viewing experience. It integrates a number of various media input interfaces to meet
your needs on a monitor for working as well as entertainment.
With these features, you can enjoy the convenience and delightful visual experience
that the MT Series brings you!
1.2 Package Contents
Check the package of your MT series Multifunction LCD monitor for the following
items:
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
LCD monitor
Monitor base and screw
Warranty card
Quick start guide
User’s manual CD
Power cord
HDMI-to-DVI cable
VGA cable
Audio cable
Remote controller and battery
▪
▪
If any of the above items is damaged or missing, contact your retailer
immediately.
Remove the tab before using the remote control.
1
2
ASUS MT276 Series LCD Monitor
11
1.3
Monitor Introduction
1.3.1 Front view
1
2
1.
Power button and power indicator
▪
▪
Press this button to turn the monitor on, off, or stand-by.
The colour of the power indicator is as the below table.
Status
Blue
Description
On
Red
No signal
(Power saving)
Off (dark)
Off/Standby
2. Remote receiver
The monitor receives the signal from the remote controller here.
▪
12
ASUS MT276 Series LCD Monitor
1.3.2 Top view
1
2
3
4
5
1.
/
/ Splendid / Auto Adjust / Exit button
▪
Use this hotkey to switch from six video preset modes (Standard mode,
Theatre mode, Game mode, Scenery mode, Night view mode and sRGB
mode) with SPLENDID™ Video Enhancement Technology
▪
▪
Exits the OSD menu or goes back to the previous menu when the OSD
menu is active.
Automatically adjust the image to its optimized position, clock, and phase by
pressing this button for 2 – 3 seconds (VGA input only)
2. MENU / Enter button
▪
▪
To turn on the OSD menu
To enter/select the icon (function) highlighted while the OSD is active
3.
/
Brightness hotkey / Right & Left button
▪
▪
To move the left/right to adjust the value of the function selected or move
right to the next function.
When OSD is not on the screen, this is also a hotkey for Brightness
adjustment.
ASUS MT276 Series LCD Monitor
13
4.
5.
/
Volume hotkey / up & Down button
▪
▪
To move the down/up to choose the function
When OSD is not on the screen, this is also a hotkey for sound volume
adjustment.
Source button
▪
To switch among the input signal sources of Component, VGA, HDMI1, and
HDMI2.
Press
(Input Select Button) to display HDMI signals after you connect
HDMI cables with the monitor.
14
ASUS MT276 Series LCD Monitor
1.3.3 Rear view
9
10
MT276H
3
3
4
5
6
1
2
2
7
8
MT276HE
1
4
5
7
1. Power socket and switch to connect power cord and to switch the monitor on
and off
2. Kensington lock
3. HDMI connection for High-Definition Multimedia Interface (HDMI) signal
connection
4. S/PDIF audio-out to output digital audio signal over S/PDIF cable
5. Audio-in for PC stereo sound to connect PC audio source
6. Audio-in connection to input audio signal over an RCA cable (only for the
MT276H)
7. VGA connection for PC VGA analogue signal connection
8. Component connection to connect Component (YPbPr) video signal source
(only for the MT276H)
9. Remote control storage
10. Headphone jack to output audio signal to headphone
ASUS MT276 Series LCD Monitor
15
1.4 Remote Controller Introduction
Replacing the battery
1. Open the battery compartment cover on the
back side.
2. Remove the old battery
3. Insert a lithium battery in correct polarity (+ to
+, - to -).
4. Close the cover.
▪
▪
Use the remote controller in front
of the remote receiver with a
distance shorter than 7 meters
and within 22.5 degree to the left
and to the right.
Dispose of used batteries in a
recycle bin to prevent from
environment pollution.
22.5 22.5
16
ASUS MT276 Series LCD Monitor
1
2
1. Increases, decreases, and mutes the
sound.
2. To switch among the input signal
sources of Component, VGA, HDMI1,
and HDMI2
3
4
5
6
7
3. Press this button to turn the monitor
on, off, or stand-by.
4. Use this hotkey to switch from six
video preset modes (Standard mode,
Theatre mode, Game mode, Scenery
mode, Night view mode and sRGB
mode) with SPLENDID™ Video
Enhancement Technology
8
5. Adjusts the aspect ration to “Full”,
“4:3”, or “Overscan”.
9
10
6. Automatically adjusts the image to its
optimized position, clock, and phase
by pressing this button for 2–3
seconds (for VGA mode only.)
11
7. Brightness hotkey
8. To move the left/right to adjust the
value of the function selected or move
right to the next function.
To move the down/up to choose the
function.
9. To enter/select the icon (function)
highlighted while the OSD is active
10. Exits the OSD menu or goes back to
the previous menu when the OSD
menu is active.
11. Turns on the OSD menu.
ASUS MT276 Series LCD Monitor
17
2.1 Assembling the Monitor
To assemble the monitor base:
1. Have the front of the monitor face down on a table.
2. Align the base on the arm to fit it into the arm groove.
3. Fix the base to the arm by fastening the bundled screw.
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
1
2
2.2 Adjusting the Posture of the Monitor
▪
For optimal viewing, we recommend that you
look at the full face of the monitor, and then
adjust the monitor to the angle that is most
comfortable for you.
-5˚ – 18˚
▪
▪
Hold the stand to prevent the monitor from falling
when you change its angle.
You can adjust the monitor’s angle from -5˚ –
18˚.
It is normal that the monitor slightly shakes while you adjust the viewing
angle.
18
ASUS MT276 Series LCD Monitor
2.3 Detaching the arm/base
(only for the MT276)
(For VESA wall mount)
The detachable am/base of this LCD monitor is specially designed for VESA wall
mount
To detach the arm/base:
1. Have the front of monitor face down on a table.
2. Remove the rubbers in the four screw holes (figure 1.)
3. Remove the base (figure 2.)
4. Using a flat head screwdriver to pry the rear hinge cover (figure 3.)
5. Use a screwdriver to remove 4 screws on the hinge (figure 4), than remove it from
the monitor.
2
1
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
ASUS MT276 Series LCD Monitor
19
2.4 Connecting the Monitor
MT276H
z PC
z External Speakers
z AV device
1
2
5
7
5
3
2
6
4 2
1
3
4
8
7
6
MT276HE
z PC
z External Speakers
z AV device
1
2
3
2
6
4 2
1
3
4
8
6
▪
▪
To connect the power cord: Connect one end of the power cord securely to the
monitor’s AC-IN port, the other end to a power outlet.
1
Before you connect the cables, ensure that the connected devices are
switched off or the power cord is unplugged from the electricity supply.
2
6
7
To connect the signal cables: Connect one end of the HDMI/ VGA/ YPbPr
cable(s) to the monitor, the other end to your computer or any other video
devices.
When more than one signal sources are simultaneously connected, you can
switch the input source by using the
or on the remote controller.
key on the key pad of the monitor
20
ASUS MT276 Series LCD Monitor
▪
▪
▪
To connect the audio cable: Connect the audio cable from the monitor’s
audio-in port to the computer’s and/or video device’s / audio-out port.
4
5
3
To connect to external speakers: Connect an S/PDIF cable from the S/PDIF
audio-out port of the monitor to the audio-in port of external speakers.
8
To use earphones: Connect the end with plug type to the monitor’s earphone
jack.
2.4 Turning the Monitor On
Turn on the main power switch on the rear of the monitor. Press the power button.
See section 1.3 Monitor Introduction for the location of the power button. The power
indicator lights up in blue to show that the monitor is ON.
2.5 Setting the Monitor
Set the PC signal to the optimal resolution and frequency for the best picture quality.
▪
Press
button for 2 – 3 seconds if noise, trembling, or picture offset appears
on the screen while VGA input in use.
ASUS MT276 Series LCD Monitor
21
3.1 On-Screen Display (OSD) Menu
3.1.1
How to reconfigure
1. Press the MENU button either on the key pad of the monitor or on the remote
controller to activate the OSD menu.
2. Use W, X, S, and T to navigate through the functions. The chosen function will
be highlighted. To activate the chosen function, press ENTER
button. If the
selected function has a sub-menu, still use W, X, S, and T to navigate through
the sub-menu functions. Again, the chosen function will be highlighted and you
may activate it by pressing ENTER
button
3. Use W, X, S, or T to change the settings of the activated function.
4. You can go back to the top level of the OSD menu list whenever you press the
MENU button. Repeat step 2 and 3 to adjust any other function.
5. To exit from the OSD menu, press the
key on the key pad of the monitor
set or EXIT button on the remote controller.
3.1.2 OSD menu introduction
1. Splendid
This function contains five sub-functions you can select for your reference. Each
mode has the Reset selection, allowing you to maintain your setting or return to
the preset mode
-
-
-
-
Standard Mode: best choice for document editing with Splendid™
Video Intelligence Technology
Theatre Mode: best choice for watching films with Splendid™ Video
Intelligence Technology
Game Mode: best choice for game playing with Splendid™ Video
Intelligence Technology
Scenery Mode: best choice for scenery photo display with Splendid™
Video Intelligence Technology
22
ASUS MT276 Series LCD Monitor
-
-
Night View Mode: best choice for dark-scene display with Splendid™
Video Intelligence Technology
sRGB Mode: best choice for viewing photos and graphics from PCs.
In the Standard Mode, the ASCR, Saturation, and Sharpness functions are
not user-configurable.
2. Colour
Select image colour you like from this function
▪
▪
▪
▪
Brightness: to adjust the luminance of the monitor
Contrast: to adjust the contrast of the displayed picture
Saturation: to adjust the saturation of the displayed picture
Colour Temperature: to select the colour temperature among Warm (The
preset correlated colour temperature (CCT) “warm” corresponds to 6500 K.),
Normal, Cool, and User mode. In User mode, you may adjust the level of the
red, green, and blue to define your preferred white colour.
▪
Skin Tone: contains five color modes including Reddish 1, Reddish 2,
Yellowish 1, Yellowish 2, and Natural.
ASUS MT276 Series LCD Monitor
23
3. Image
You can adjust brightness, contrast, sharpness, saturation, position (VGA only),
and focus (VGA only) from this menu
▪
Sharpness: to adjust the sharpness of the displayed picture; this function is
active only in Standard Splendid™ mode
▪
▪
▪
▪
Trace Free: to adjust the response time of the monitor
Aspect Control: adjust the aspect ratio to “Full” or “4:3” or “ Overscan”.
ASCR: to switch on and off the ASUS Smart Contrast Ratio function
Position: adjusts the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100.
▪
Focus: reduces Horizontal line noise and Vertical-line noise of the image by
adjusting (Phase) and (Clock) separately. The adjusting range is from 0 to
100.
▪
▪
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows
vertical stripes and the image is not proportional.
24
ASUS MT276 Series LCD Monitor
4. Sound
▪
▪
▪
▪
Volume: to adjust the volume of either speakers or earphone
Bass: to adjust the bass level
Treble: to adjust the treble level
Balance: to adjust the sound balance of the speakers to your preferred
levels
▪
Mute: to mute the sound
5
Input Source
In this function, you can select your desired input source.
ASUS MT276 Series LCD Monitor
25
6
System Setup
Allow you to adjust the system.
▪
OSD Setup:
Adjusts the horizontal position (H-Position)/the vertical position
(V-Position) of the OSD from 0 to 100.
Adjusts the OSD timeout from 10 to 120 seconds.
Enables or disables the DDC/CI function.
Adjusts the OSD transparency.
▪
▪
Information: shows the monitor information.
Language: there are 11 languages for your selection, including English,
German, Italian, French, Dutch, Spanish, Russian, Traditional Chinese,
Simplified Chinese, Japanese and Korean.
▪
All Reset: “Yes” allows you to restore the default settings.
26
ASUS MT276 Series LCD Monitor
3.2 Specifications Summary
(MT276H)
TFT LCD
Panel Type
27” (16:9) wide screen
1920 x 1080
Panel Size
Max Resolution
Pixel Pitch
0.31125 mm
400 cd/m2
Brightness (Typ)
Contrast Ratio (Typ)
Contrast Ratio (Max)
1000:1
50000:1 (with ASCR on)
170 degrees Horizontal (typ.)
160 degrees Vertical (typ.)
Viewing Angle (H/V)
CR > 10
16.7 M
Display Colors
2 ms
Response Time
SPLENDID Selection
Auto Adjustment
6 video preset modes
Yes
4 color temperatures
Color Temperature
Selection
5 skin-tones
Skin-Tone Selection
Digital Input
HDMI x 2 (v1.3)
D-Sub, Component (YPbPr) x 1
Analogue Input
Audio-in Port
Digital Audio Output
Earphone Jack
Colors
RCA (R+L) x 1, 3.5 mm Mini-jack x 1
S/PDIF x 1
Yes
Black
3W x 2
Speaker (Built-in)
Power LED
Blue (On)/Red (Standby)
-5°~18°
Tilt
Yes
Kensington Lock
AC 100 -240V
AC/DC Adaptor Input
Voltage
Power on < 65W; Stand-by <1 W; Power off < 1W
Power Consumption
0°C ~ 40 °C
Temperature (Operating)
-20°C ~ 60 °C
Temperature
(Non-operating)
666.5 mm x 515.2 mm x 229.9 mm (machine)
755 mm x 685 mm x 148 mm (package)
Dimension (W*H*D)
9 Kg (Net); 11.8 Kg (gross)
Weight (Esti)
11 Languages (English, German, Italian, French, Dutch, Spanish,
Russian, Traditional Chinese, Simplified Chinese, Japanese, Korean)
Multilanguage
D-Sub cable, Audio cable, Power cord, HDMI-DVI cable, Warranty card,
Quick Start Guide, User Guide CD
Accessory
Energy Star®, EuP, TCO06, UL/cUL, CB, CE, FCC, CCC, BSMI,
Gost-R, C-Tick, VCCI, PSB, J-MOSS, RoHS, WEEE, ISO 9421-307,
Windows Vista WHQL
Regulation Approvals
* Specifications are subject to change without prior notice.
ASUS MT276 Series LCD Monitor
27
(MT276HE)
TFT LCD
Panel Type
27” (16:9) wide screen
1920 x 1080
Panel Size
Max Resolution
Pixel Pitch
0.31125 mm
400 cd/m2
Brightness (Typ)
Contrast Ratio (Typ)
Contrast Ratio (Max)
1000:1
50000:1 (with ASCR on)
170 degrees Horizontal (typ.)
160 degrees Vertical (typ.)
Viewing Angle (H/V)
CR > 10
16.7 M
Display Colors
2 ms
Response Time
SPLENDID Selection
Auto Adjustment
6 video preset modes
Yes
4 color temperatures
Color Temperature
Selection
5 skin-tones
HDMI x 2 (v1.3)
D-Sub
Skin-Tone Selection
Digital Input
Analogue Input
Audio-in Port
Digital Audio-out Port
Earphone Jack
Colors
3.5 mm Mini-jack x 1
S/PDIF x 1
Yes
Black
3W x 2
Speaker (Built-in)
Power LED
Blue (On)/Red (Standby)
-5°~18°
Tilt
Yes
Kensington Lock
AC 100 -240V
AC/DC Adaptor Input
Voltage
Power on < 65W; Stand-by <1 W; Power off < 1W
Power Consumption
0°C ~ 40 °C
Temperature (Operating)
-20°C ~ 60 °C
Temperature
(Non-operating)
666.5 mm x 515.2 mm x 229.9 mm (machine)
755 mm x 685 mm x 148 mm (package)
Dimension (W*H*D)
9 Kg (Net); 11.8 Kg (gross)
Weight (Esti)
11 Languages (English, German, Italian, French, Dutch, Spanish,
Russian, Traditional Chinese, Simplified Chinese, Japanese, Korean)
Multilanguage
D-Sub cable, Audio cable, Power cord, HDMI-DVI cable, Warranty card,
Quick Start Guide, User Guide CD
Accessory
Energy Star®, EuP, TCO06, UL/cUL, CB, CE, FCC, CCC, BSMI,
Gost-R, C-Tick, VCCI, PSB, J-MOSS, RoHS, WEEE, ISO 9421-307,
Windows Vista WHQL
Regulation Approvals
* Specifications are subject to change without prior notice.
28
ASUS MT276 Series LCD Monitor
3.3 Troubleshooting (FAQ)
Phenomenon
Recommended Actions
Power indicator off
▪
▪
Press the power button again and check whether
the power is on.
Check whether the power switch on the back side
of the monitor is on.
▪
▪
Check whether the power cord is well connected.
Amber power indicator
and blank screen
Check whether both the monitor and the selected
video device, or the computer, are on.
Check whether the signal cable is well connected.
Check whether the signal cable is undamaged.
When computer is in use, check whether the
computer is waken by clicking any key on the
keyboard or moving the mouse.
▪
▪
▪
▪
Check whether the video device, or the computer,
is working well by connecting it to another monitor,
if available.
Remote controller
malfunctions
▪
▪
▪
Ensure no obstruction between the monitor and
the remote controller.
Check whether the batteries are installed correctly
to the correspondent polarities.
Install a new battery.
Screen too bright, too
dark, or colour error
▪
▪
Check whether the signal cable is undamaged.
Use “All Reset” function in the System Setup
menu.
Screen image bouncing,
rolling, or with
water-flowing pattern
▪
▪
Check whether the signal cable is well connected.
Move away electrical devices that may cause
electromagnetic interference.
Screen image blurry or
fuzzy
▪
Check whether the video signal cable is well
connected.
▪
▪
Use “Auto Adjust” function for VGA input.
No sound or low sound
level
Check whether the audio cable is well connected.
For some video devices and computers, the audio
signal is NOT transmitted over the HDMI interface.
Audio cable MUST be connected in this case.
Adjust the volume level.
▪
▪
For PC sound, check whether the sound card and
its driver are properly installed and activated.
PC screen image not
▪
Use “Auto Adjust” function.
centred or sized properly
ASUS MT276 Series LCD Monitor
29
3.4 Supported Operating Modes
Horizontal
frequency
Resolution
Vertical frequency
Pixel frequency
640 x 480
640 x 480
60Hz
67Hz
73Hz
75Hz
70Hz
56Hz
60Hz
72Hz
75Hz
75Hz
60Hz
70Hz
75Hz
75Hz
60Hz
60Hz
75Hz
60Hz
60Hz
60Hz
60Hz
31.47KHz
35.00KHz
37.86KHz
37.50KHz
31.47KHz
35.16KHz
37.88KHz
48.08KHz
46.88KHz
49.72KHz
48.36KHz
56.48KHz
60.02KHz
67.50KHz
60KHz
25.17MHz
30.24MHz
31.50MHz
31.50MHz
28.32MHz
36.00MHz
40.00MHz
50.00MHz
49.50MHz
57.28MHz
65.00MHz
75.00MHz
78.75MHz
108.00MHz
108MHz
640 x 480
640 x 480
720 x 400
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 960
1280 x 1024
1280 x 1024
1440 x 900
1600 x 1200
1680 x 1050
1920 x 1080
63.98KHz
79.98KHz
55.94KHz
75.00KHz
65.29KHz
67.50KHz
108.00MHz
134.99MHz
106.50MHz
162.00MHz
146.24MHz
148.50MHz
▪
▪
Modes not listed in the table may possibly not be supported. For optimal resolution, we
recommend that you choose a mode listed in the table above.
The monitor supports full HD (480p, 576p, 720p, 1080i/p) video content from game consoles, DVD
players, and other consumer video devices via HDMI & Component (YPbPr).
30
ASUS MT276 Series LCD Monitor
|