A7V600-X
User Guide
Contents
Notices ............................................................................................ v
Safety information .......................................................................... vi
About this guide............................................................................. vii
ASUS contact information ............................................................ viii
A7V600-X specifications summary................................................. ix
Chapter 1: Product introduction
1.1 Welcome! ........................................................................... 1-2
1.2 Package contents ............................................................... 1-2
1.3 Special Features ................................................................ 1-3
1.3.1 Product highlights ................................................... 1-3
1.3.2 Value-added solutions ............................................ 1-5
1.4 Motherboard components .................................................. 1-6
1.4.1 Core specifications ................................................. 1-7
1.5 Motherboard layout ............................................................ 1-9
1.6 Before you proceed .......................................................... 1-10
1.7 Motherboard installation ....................................................1-11
1.7.1 Placement direction ..............................................1-11
1.7.2 Screw holes ..........................................................1-11
1.8 Central Processing Unit (CPU)......................................... 1-12
1.8.1 Installing the CPU ................................................ 1-12
1.9 System memory ............................................................... 1-13
1.9.1 DDR400 Qualified Vendor List ............................. 1-13
1.10 Expansion slots ................................................................ 1-14
1.10.1 Configuring an expansion card........................... 1-14
1.10.2 Standard interrupt assignments ......................... 1-14
IRQ assignments for this motherboard ....................... 1-15
1.10.3 AGP slot ............................................................. 1-15
1.11 Jumpers............................................................................ 1-16
1.12 Connectors ....................................................................... 1-18
Chapter 2: BIOS information
2.1 Managing and updating your BIOS .................................... 2-2
2.1.1 Using ASUS EZ Flash to update the BIOS ............ 2-2
iii
Contents
2.1.2 Using AFLASH to update the BIOS ....................... 2-4
2.1.3 Recovering the BIOS with CrashFree BIOS 2 ....... 2-7
2.2 BIOS Setup program .......................................................... 2-9
2.2.1 BIOS menu bar ...................................................... 2-9
2.2.2 Legend bar........................................................... 2-10
2.3 Main Menu.........................................................................2-11
2.3.1 Primary and Secondary Master/Slave ................. 2-13
2.3.2 Keyboard Features .............................................. 2-15
2.4 Advanced Menu ............................................................... 2-16
2.4.1 Chip Configuration ............................................... 2-18
2.4.2 I/O Device Configuration...................................... 2-20
2.4.3 PCI Configuration ................................................ 2-22
2.5 Power Menu ..................................................................... 2-23
2.5.1 Power Up Control ................................................ 2-25
2.5.2 Hardware Monitor ................................................ 2-26
2.6 Boot Menu ........................................................................ 2-27
2.7 Exit Menu ......................................................................... 2-29
Chapter 3: Software support
3.1 Install an operating system................................................. 3-2
3.2 Support CD information ...................................................... 3-2
3.2.1 Running the support CD ........................................ 3-2
3.2.2 Drivers menu ......................................................... 3-3
3.2.3 Utilities menu ......................................................... 3-3
3.2.4 ASUS Contact Information ..................................... 3-4
3.3 ASUS Instant Music Lite..................................................... 3-5
3.4 RAID 0 / RAID 1 / RAID 0 + 1 Configurations .................... 3-7
3.4.1 Install the Serial ATA (SATA) hard disks................. 3-8
3.4.2 Enter VIA® Tech RAID BIOS Utility ........................ 3-9
3.4.3 Create Array......................................................... 3-10
3.4.4 Delete Array ......................................................... 3-13
3.4.5 Select Boot Array ................................................. 3-13
3.4.6 Serial Number View ............................................. 3-14
iv
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the
graphics card is required to assure compliance with FCC regulations.
Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to
operate this equipment.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
v
Safety information
Electrical safety
• To prevent electrical shock hazard, disconnect the power cable from
the electrical outlet before relocating the system.
• When adding or removing devices to or from the system, ensure that
the power cables for the devices are unplugged before the signal
cables are connected. If possible, disconnect all power cables from the
existing system before you add a device.
• Before connecting or removing signal cables from the motherboard,
ensure that all power cables are unplugged.
• Seek professional assistance before using an adpater or extension
cord. These devices could interrupt the grounding circuit.
• Make sure that your power supply is set to the correct voltage in your
area. If you are not sure about the voltage of the electrical outlet you
are using, contact your local power company.
• If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
Operation safety
• Before installing the motherboard and adding devices on it, carefully
read all the manuals that came with the package.
• Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
• To avoid short circuits, keep paper clips, screws, and staples away from
connectors, slots, sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Do not place the
product in any area where it may become wet.
• Place the product on a stable surface.
• If you encounter technical problems with the product, contact a
qualified service technician or your retailer.
vi
About this guide
Conventions used in this guide
To make sure that you perform certain tasks properly, take note of the
following symbols used throughout this manual.
WARNING/DANGER: Information to prevent injury to yourself
when trying to complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a task.
Where to find more information
Refer to the following sources for additional information and for product
and software updates.
1. ASUS Websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. The ASUS websites are listed in the
ASUS Contact Information on page viii.
2. Optional Documentation
Your product package may include optional documentation, such as
warranty flyers, that may have been added by your dealer. These
documents are not part of the standard package.
vii
ASUS contact information
ASUSTeK COMPUTER INC. (Asia-Pacific)
Address
15 Li-Te Road, Peitou, Taipei, Taiwan 112
Telephone
Web site
+886-2-2894-3447
Technical Support
Telephone(MB/Component)
(Notebook)
(Server/PC)
(Networking)
Support fax
+886-2-2890-7121 (English)
+886-2-2890-7122 (English)
+886-2-2890-7123 (English)
+886-2-2890-7902 (English)
+886-2-2890-7698
ASUS COMPUTER INTERNATIONAL (America)
Address
44370 Nobel Drive, Fremont, CA 94538, USA
Fax
E-mail
Web site
+1-510-608-4555
usa.asus.com
Technical Support
Telephone (General)
(Notebook)
Support fax
Support e-mail
+1-502-995-0883
+1-510-739-3777
+1-502-933-8713
ASUS COMPUTER GmbH (Germany and Austria)
Address
Harkort Str. 25, D-40880 Ratingen, Germany
Telephone
Fax
Online contact
Technical Support
Telephone
Fax
+49-2102-95990
+49-2102-959911
+49-2102-95990
+49-2102-959911
Online support
Web site
viii
A7V600-X specifications summary
CPU
Socket A for AMD Athlon XP/Athlon/Duron with
Thoroughbred/Barton Core support
Chipset
Northbridge: VIA KT600
Southbridge: VIA VT8237
Front Side Bus (FSB)
Memory
400/333/266/200Mhz
3 x 184-pin DDR DIMM Sockets support a maximum of 3GB
unbuffered non-ECC PC3200/2700/2100 DDR SDRAM
memory
Expansion slots
Storage
1 x AGP 8X
6 x PCI
2 x UltraDMA 133/100/66
2 x Serial ATA with RAID 0, RAID 1 and JBOD support
Audio
ADI AD1888 6-channel CODEC
S/PDIF out interface
LAN
Integrated 10/100 Mbps LAN controller
Special Features
ASUS EZ Flash
Power Loss Restart
ASUS C.O.P. (CPU Overheating Protection)
ASUS CrashFree BIOS 2
ASUS Instant Music Lite
Overclocking
Features
ASUS JumperFree
ASUS C.P.R. (CPU Parameter Recall)
CPU Voltage adjustable
SFS (Stepless Frequency Selection) from 100Mhz up to
250MHz at 1MHz increment
Back Panel I/O
1 x Parallel
1 x Serial
1 x PS/2 Keyboard
1 x PS/2 Mouse
1 x Audio I/O
4 x USB 2.0
1 x RJ-45 Port
1 x S/PDIF out port
Internal I/O
Connectors
CPU/Chassis FAN connectors
20-pin ATX power connector
Chassis Intrusion
GAME/MIDI connector
CD/AUX audio in
Front panel audio connector
2 x USB 2.0 connector supports additional 4 USB 2.0 ports
2 x Serial ATA port
(continued on the next page)
ix
A7V600-X specifications summary
BIOS features
2Mb Flash ROM, ASUS Jumperfree, Award BIOS, PnP,
DMI2.0, WfM2.0, SM BIOS2.3, ASUS EZ Flash, ASUS
CrashFree BIOS 2, ASUS C.P.R.
Industry standard
Manageability
PCI 2.2, USB 2.0
WfM 2.0. DMI 2.0, WOR, WOL, chassis intrusion
ATX form factor: 12 in x 9.6 in (30.5 cm x 24.5 cm)
Form Factor
Support CD contents
Device drivers
ASUS PC Probe
Anti-virus utility
ASUS LiveUpdate Utility
* Specifications are subject to change without notice.
x
Chapter 1
This chapter gives information about the ASUS
A7V600-X motherboard that came with the
system.This chapter includes the motherboard
layout, jumper settings, and connector locations.
ASUS A7V600-X motherboard
1-1
1.1 Welcome!
Thank you for buying the ASUS® A7V600-X motherboard!
The ASUS A7V600-X motherboard is loaded with the most advanced technologies
to deliver the maximum performance for socket A processors. Based on the
advanced VIA KT600 chipset with FSB 400 and DDR 400 support, the ASUS
A7V600-X also features AGP 8X, Serial ATA, USB 2.0 as well as 6-channel audio,
Fast Ethernet LAN and S/PDIF out features. Unique ASUS features such as ASUS
C.O.P., C.P.R. , CrashFree BIOS2, and more are included to ensure the best user
experience and value in a motherboard.
Before you start installing the motherboard, and hardware devices on it, check the
items in your package with the list below.
1.2 Package contents
Check your ASUS A7V600-X package for the following items.
ASUS A7V600-X motherboard
ATX form factor: 12 in x 9.6 in (30.5 cm x 24.5 cm)
ASUS A7V600-X series support CD
1 pc. 80-conductor ribbon cable for UltraDMA/66/100/133 IDE drives
Ribbon cable for a 3.5-inch floppy drive
I/O shield
Bag of extra jumper caps
User Guide
1-2
1.3 Special features
1.3.1 Product highlights
400 FSB K7 Platform
The ASUS A7V600-X motherboard is loaded with the most advanced technologies
to deliver the maximum performance for socket A processors. Based on the
advanced VIA KT600 chipset with FSB 400 and DDR 400 support, the ASUS
A7V600-X features AGP8X, Serial ATA, USB 2.0 as well as a 6-channel audio
CODEC and Fast Ethernet LAN. Unique ASUS features such as ASUS C.O.P.,
C.P.R. and more are included to ensure the best user experience and value in a
motherboard.
400MHz FSB Athlon XP CPU support
AMD’s Athlon XP 3200+ and all follow-up CPUs now support 400MHz Front Side
Bus (FSB) for increased office productivity and enhanced digital media experience.
DDR400 (PC3200) support
DDR400 (PC3200), the latest and fastest DDR memory standard, supports
bandwidth up to 3.2 GB/s to provide enhanced system performance.
(Note: PC3200 maximum to 2 DIMMs only. Visit the ASUS website for the latest
qualified DDR400 module list.)
AGP 8X support
AGP 8X (AGP 3.0) is the next generation VGA interface specification that enables
enhanced graphics performance with high bandwidth speeds up to 2.12 GB/s. With
a bus of 533Mhz, AGP 8X is twice as fast as AGP 4X.
Serial ATA technology
Serial ATA is the next generation ATA specification that provides scalable
performance for today and tomorrow. With up to 150MB/s data transfer rate, SATA
is faster than current Parallel ATA, while providing 100% software compatibility.
8 USB 2.0 ports
USB 2.0 is the latest connectivity standard for next generation components and
peripherals. USB 2.0 delivers fast transfer speeds up to 40 times faster at 480 MB/
s, for easy connectivity and ultra-fast data transfers. The higher bandwidth of USB
2.0 allows connection of devices such as high resolution video conferencing
cameras, next generation scanners, printers, and fast storage units. USB 2.0 is
backward compatible with USB 1.1.
ASUS A7V600-X motherboard
1-3
S/PDIF out port on Back I/O
The A7V600-X provides convenient connectivity to external home theater audio
systems via an S/PDIF out interface. Experience 5.1-channel surround sound and
enhanced 3D audio while playing your favorite DVDs or games.
C.O.P. (CPU Overheating Protection):
With AMD® Athlon XP™ installed, the motherboard offers automatic CPU
Overheating Protection to prolong the life of the entire system. If the CPU
temperature exceeds the set criteria, the PC shuts down automatically.
ASUS C.P.R. (CPU Parameter Recall)
The C.P.R. feature of the ASUS motherboard BIOS allows automatic resetting to
the BIOS previous settings in case the system hands due to overclocking. When
the system hangs due to overclocking, C.P.R. eliminates the need to open the
system chassis and clear the RTC data. Simply reboot the system, and the BIOS
automatically restores the previous value of the CPU parameters.
CrashFree BIOS 2
The CrashFree BIOS 2 feature allows you to restore the original BIOS data from
the ASUS support CD in case when the BIOS codes and data are corrupted. This
protection feature eliminates the need to buy a replacement ROM chip.
ASUS EZ Flash BIOS
With the ASUS EZ Flash, you can easily update the system BIOS even before
loading the operating system. No need to use a DOS-based utility or boot from a
floppy disk.
ASUS Instant Music Lite
Through this unique feature, the motherboard is conveniently designed to allow
users to enjoy their favorite music, without the need to enter Windows. (The
stickers on keyboard are separately purchased.)
1-4
1.3.2 Value-added solutions
Overclocking
•
adjustable CPU frequency multiple in BIOS using the ASUS JumperFree™
solution
•
•
•
C.P.R. (CPU Parameter Recall)
adjustable CPU VCORE voltages
Stepless Frequency Selection (SFS) for fine-tuning system bus frequency from
100MHz up to 250MHz at 1MHz increments
Temperature, fan, and voltage monitoring
The CPU temperature is monitored by the ASUS ASIC to prevent overheating and
damage. The system fan rotations per minute (RPM) is monitored for timely failure
detection. The system voltage levels are monitored to ensure stable supply of
current for critical components.
Chassis intrusion detection
The motherboard supports chassis intrusion monitoring. A chassis intrusion event
is retained in CMOS for more protection.
ASUS update
This utility allows you to update the motherboard BIOS through a user-friendly
interface. Connect to the Internet then to the ASUS FTP site nearest you to obtain
the latest BIOS version for your motherboard.
ASUS A7V600-X motherboard
1-5
1.4 Motherboard components
Before you install the motherboard, learn about its major components and available
features to facilitate the installation and future upgrades. Refer to the succeeding
pages for the component descriptions.
1 2
3
4
5
6
7
16
8
9
15
14
10
13
12 11
17
18
19
20
21
22
27
26
25
23
24
1-6
Chapter 1: Motherboard Information
1.4.1 Core specifications
CPU socket. Socket 462 (Socket A) surface mount, Zero Insertion Force
(ZIF) socket for the AMD Athlon XP/Athlon/Duron Processors.
(Note: When using CPUs with FSB 100, the maximum DDR data transfer
rate allowed is only at 266Mhz.)
1
North bridge controller. The VIA® KT600 supports AGP 8X mode, 400/
333/266/200MHz Front Side Bus, and the latest 400/333/266MHz 64-bit
memory bus.
2
3
DDR DIMM sockets. These three 184-pin DIMM sockets support up to 3GB
system memory using unbuffered non-ECC PC2700/2100 DDR DIMMs.
(Note: PC3200 maximum to 2 DIMMs support only. Visit the ASUS website
IDE connectors. These dual-channel bus master IDE connectors support
up to four Ultra DMA133/100/66, PIO Modes 3 & 4 IDE devices. Both the
primary (blue) and secondary (black) connectors are slotted to prevent
incorrect insertion of the IDE ribbon cable.
4
ATX power connector. This 20-pin connector connects to an ATX +12V
power supply. The power supply must have at least 1A on the +5V standby
lead (+5VSB).
5
6
Floppy disk connector. This connector accommodates the provided
ribbon cable for the floppy disk drive. One side of the connector is slotted
to prevent incorrect insertion of the floppy disk cable.
AGP slot. This Accelerated Graphics Port (AGP) slot supports 1.5V
AGP8X mode graphics cards for 3D graphical applications.
7
8
9
Serial ATA connectors. These two 7-pin connectors accommodate the thin
cables for Serial ATA devices.
South bridge controller. The VIA® VT8237 integrated peripheral controller
supports various I/O functions including two Serial ATA ports, 2-channel
ATA/133 bus master IDE controller, up to eight USB 2.0 ports, LPC Super
I/O interface, AC’97 interface and PCI 2.2 interface.
Flash ROM. This 2Mb firmware contains the programmable BIOS
program.
10
11
Standby power LED. This LED lights up if there is a standby power on the
motherboard. This LED acts as a reminder to turn off the system power
before plugging or unplugging devices.
USB connectors. These two 10-1 pin connectors accomodates a USB 2.0
module.
12
13
Super I/O controller. This Low Pin Count (LPC) interface provides the
commonly used Super I/O functionality. The chipset supports a high-
performance floppy disk controller for a 360K/720K/1.44M/2.88M floppy
disk drive, a multi-mode parallel port, two standard compatible UARTs, and
a Flash ROM interface.
ASUS A7V600-X Motherboard
1-7
PCI slots. These six 32-bit PCI 2.2 expansion slots support bus master
PCI cards like SCSI or LAN cards with 133MB/s maximum throughput.
14
15
Audio CODEC . The ADI 1888 is an AC’97 compliant audio CODEC for
PC multimedia systems.
LAN controller. The Realtek 8201BL Fast Ethernet LAN controller delivers
transfer rates of up to 10/100Mbps Ethernet connections. Ideal for handling
large amounts of data such as video, audio and voice.
16
PS/2 mouse port. This green 6-pin connector is for a PS/2 mouse.
17
18
Parallel port. This 25-pin port connects a parallel printer, a scanner, or
other devices.
RJ-45 port. This port allows connection to a Local Area Network (LAN)
through a network hub.
19
20
Line In jack. This Line In (light blue) jack connects a tape player or other
audio sources. In 6-channel mode, the function of this jack becomes Bass/
Center speaker.
Line Out jack. This Line Out (lime) jack connects a headphone or a
speaker. In 6-channel mode, the function of this jack becomes Front
Speaker Out.
21
22
Microphone. This Mic (pink) jack connects a microphone. In a 6-channel
mode, the function of this jack becomes Rear Speaker Out.
Audio 2, 4 and 6-channel configuration
Connector
Headphone/2-Speaker
4-Speaker
Line In
6-Speaker
Bass/Center
Light Blue
Lime
Line In
Line Out
Mic In
Front Speaker Out
Rear Speaker Out
Front Speaker Out
Rear Speaker Out
Pink
USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports
are available for connecting USB 2.0 devices.
23
24
USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports
are available for connecting USB 2.0 devices.
Serial port (COM1). This 9-pin serial port is for an additional serial device.
S/PDIF out jack. This jack connects to external audio output devices.
PS/2 keyboard port. This purple 6-pin connector is for a PS/2 keyboard.
25
26
27
1-8
Chapter 1: Motherboard Information
1.5 Motherboard layout
24.5cm (9.6in)
PS/2KBMS
T: Mouse
B: Keyboard
OVER_VOLT1
CPU_FAN
KBPWR
SPDIF_O
COM1
USBPW12
USBPW34
USB1
USB2
VIA
KT600
Chipset
USB2.0
T: USB4
B: USB3
Top:
RJ-45
Top:Line In
Center:Line Out
Below:Mic In
AUX
CD
Accelerated Graphics Port (AGP)
10/100
LAN
PCI1
SATA2
SATA1
A7V600-X
VIA
VT8237
South
PCI2
FP_AUDIO
Bridge
PCI3
CR2032 3V
Lithium Cell
CMOS Power
AD1980
CODEC
PCI4
PCI5
PCI6
CLRTC
Super
I/O
4Mbit
®
Low Pin
Count
GAME
USBPW78
USBPW56
SB_PWR
CHASSIS
CHA_FAN
USB56 USB78
PANEL
ASUS A7V600-X Motherboard
1-9
1.6 Before you proceed
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
1. Unplug the power cord from the wall socket before touching any
component.
2. Use a grounded wrist strap or touch a safely grounded object or to a metal
object, such as the power supply case, before handling components to
avoid damaging them due to static electricity.
3. Hold components by the edges to avoid touching the ICs on them.
4. Whenever you uninstall any component, place it on a grounded antistatic
pad or in the bag that came with the component.
5. Before you install or remove any component, ensure that the ATX
power supply is switched off or the power cord is detached from the
power supply. Failure to do so may cause severe damage to the
motherboard, peripherals, and/or components.
When lit, the green LED (SB_PWR) indicates that the system is ON, in
sleep mode, or in soft-off mode, a reminder that you should shut down
the system and unplug the power cable before removing or plugging in
any motherboard component.
A7V600-X
SB_PWR
®
ON
OFF
Standby
Power
Powered
Off
A7V600-X Onboard LED
Install only 1.5V AGP cards on this motherboard to prevent damage to
your AGP card or motherboard.
1-10
Chapter 1: Motherboard Information
1.7 Motherboard installation
Before you install the motherboard, study the configuration of your chassis to
ensure that the motherboard fits into it. The motherboard uses the ATX form factor
that measures 12 inches x 9.6 inches (30.5 cm x 24.5 cm).
Make sure to unplug the power cord before installing or removing the
motherboard. Failure to do so may cause you physical injury and damage
motherboard components.
1.7.1 Placement direction
When installing the motherboard, make sure that you place it into the chassis in
the correct orientation. The edge with external ports goes to the rear part of the
chassis as indicated in the image below.
1.7.2 Screw holes
Place nine (9) screws into the holes indicated by circles to secure the motherboard
to the chassis.
Do not overtighten the screws! Doing so may damage the motherboard.
Place this side towards
the rear of the chassis
ASUS A7V600-X Motherboard
1-11
1.8 Central Processing Unit (CPU)
The motherboard provides a Socket A (462) for CPU installation. AMD processors
offer gigahertz speeds to support all the latest computing platforms and applications.
TheA7V600-X supportsAthlonTM XP,AMDAthlonTM, AMD Barton™ andAMD DuronTM
processors.
CPU NOTCH
TO INNER
CORNER
AMD™ CPU
A7V600-X
®
CPU NOTCH
A7V600-X Socket A
LEVER
LOCK
1.8.1 Installing the CPU
Follow these steps to install a CPU:
1. Locate the Socket 462 and open it by pulling
the lever gently sideways away from the
socket. Then lift the lever upwards. The
socket lever must be fully opened (90 to 100
degrees).
2. Insert the CPU with the correct orientation.
The notched or golden corner of the CPU
must be oriented toward the inner corner of
the socket base nearest to the lever hinge.
The CPU should drop easily into place. Do not force the CPU into the
socket to avoid bending the pins. If the CPU does not fit, check its
alignment and look for bent pins.
4. Once completely inserted, press the CPU firmly and close the socket lever until it
snaps shut.
5. Place the CPU fan and heatsink on the CPU. The heatsink should entirely cover
the CPU. Carefully attach the heatsink locking brace to the plastic clips on the
socket base. With the added weight of the CPU fan and heatsink locking brace,
no extra force is required to keep the CPU in place
1-12
Chapter 1: Motherboard Information
1.9 System memory
The motherboard has three Double Data Rate (DDR) DIMM sockets that supports
up to 3GB unbuffered non-ECC PC3200/2700/2100 DDR DIMMs.
A DDR DIMM has the same physical dimensions as an SDR DIMM, but it has a
184-pin footprint compared to the 168-pin of the SDR DIMM. Also, a DDR DIMM is
single notched while an SDR DIMM is double notched.
A7V600-X
®
A7V600-X 184-Pin DDR DIMM Sockets
A DDR DIMM is keyed with a notch so that it fits in only one direction. DO NOT
force a DIMM into a socket to avoid damaging the DIMM.
PC3200 maximum to 2 banks only.
1.9.1 DDR400 Qualified Vendor List
The following table lists the PC3200-DDR400 memory modules that have been
tested and qualified for use with this motherboard. Make sure to use only the
tested and qualified DDR400 DIMMs listed below.
1.9.1.1 DDR400 One DIMM support only
Vendor
Size
Type
P/N
Chip
Samsung
KingMax
Micron
512MB
512MB
256MB
512MB
512MB
512MB
DS
DS
SS
DS
DS
DS
M368L6432ETM-CCC
MPXC22D-38KT3R
K4H560838E-TCCC
KDL388P4EA-50
MT8VDDT3264AG-40BC4
MT16VDDT6464AG-40BC4
NT512D64S8HB1G-5T
HYS64D64320GU-5-B
MT46V32MTG-5BC
MT46V32M8TG-5BC
NT5DS32M8BT-5T
HYB25D256800BT-5
Micron
NANYA
Infineon
1.9.1.2 DDR400 Two DIMM support only
Vendor
Size
Type
P/N
Chip
GEIL
512MB
512MB
256MB
256
DS
DS
SS
SS
MAG16UL3264D1TG5A-KC
MT16VDDT6464AG-40BC4
NT256D64S88B1G-5T
GL3LC32G88TG-5A
MT46V32M8TG-5BC
NT5DS32M8BT-5T
K4H560838D-TCC4
Micron
Nanya
ADATA
MDOSS6F3G31JB1EAE
ASUS A7V600-X Motherboard
1-13
1.10 Expansion slots
The A7V600-X motherboard has six (6) expansion PCI slots and one (1) AGP 8X
slot. The following sub-sections describe the slots and the expansion cards that
they support.
1.10.1 Configuring an expansion card
After physically installing the expansion card, configure the card by adjusting the
software settings.
1.
2.
3.
Turn on the system and change the necessary BIOS settings, if any.
Assign an IRQ to the card. Refer to the tables below.
Install the software drivers for the expansion card.
1.10.2 Standard Interrupt Assignments
IRQ
0
Priority
Standard Function
System Timer
1
1
2
Keyboard Controller
2
4*
5*
6
7*
8
9*
10*
11*
12*
13
14*
15*
N/A
12
13
14
15
3
4
5
6
7
Programmable Interrupt
Communications Port (COM1)
Sound Card (sometimes LPT2)
Floppy Disk Controller
Printer Port (LPT1)
System CMOS/Real Time Clock
ACPI Mode when used
IRQ Holder for PCI Steering
IRQ Holder for PCI Steering
PS/2 Compatible Mouse Port
Numeric Data Processor
Primary IDE Channel
8
9
10
Secondary IDE Channel
*These IRQs are usually available for ISA or PCI devices.
1-14
Chapter 1: Motherboard Information
IRQ assignments for this motherboard
A
—
shared
—
—
—
shared
shared
—
B
—
—
shared
—
—
—
—
—
—
—
—
—
—
—
—
—
—
C
—
—
D
shared
—
—
—
shared
—
—
—
—
—
—
—
—
—
—
—
—
E
—
—
—
—
—
—
—
shared
shared
—
—
—
—
—
—
shared
shared
F
—
—
—
—
—
—
—
—
G
—
—
—
—
—
—
—
—
H
—
—
—
—
—
—
—
—
—
—
—
—
PCI slot
PCI slot 2
PCI slot 3
PCI slot 4
PCI slot 5
PCI slot 6
AGP slot
USB 1.1 UHCI 1
USB 1.1 UHCI 2
USB 1.1 UHCI 3
USB 1.1 UHCI 4
USB 2.0 EHCI
USB Device
AC97 Codec
Onboard LAN
Onboard SATA
Onboard IDE
—
shared
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
shared
shared
—
—
—
—
—
—
shared
—
shared
—
shared
—
—
shared
—
—
—
—
—
—
—
—
1.10.3 AGP slot
This motherboard has an Accelerated Graphics Port (AGP) slot that supports
+1.5V AGP cards only. When you buy an AGP card, make sure that you ask for
one with +1.5V specification. Note the notches on the card golden fingers to
ensure that they fit the AGP slot on your motherboard.
A7V600-X
Keyed for 1.5v
®
A7V600-X Accelerated Graphics Port (AGP)
ASUS A7V600-X Motherboard
1-15
1.11 Jumpers
1. USB device wake-up (3-pin USBPW12, USBPW34, USBPW56, USBPW78)
Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU
stopped, DRAM refreshed, system running in low power mode) using the
connected USB devices. Set to +5VSB to wake up from S3 sleep mode (no
power to CPU, DRAM in slow refresh, power supply in reduced power mode).
All jumpers are set to pins 1-2 (+5V) by default because not all computers have
the appropriate power supply to support this feature.
The USBPW12 and USBPW34 jumpers are for the rear USB ports. The
USBPW56 and USBPW78 jumpers are for the internal USB header that you
can connect to the front USB ports.
1. This feature requires a power supply that can provide at least 2A
on the +5VSB lead when these jumpers are set to +5VSB.
Otherwise, the system does not power up.
2. The total current consumed must NOT exceed the power supply
capability (+5VSB) whether under normal or in sleep mode.
USBPW12
USBPW34
2
1 2
3
+5V
(Default)
+5VSB
A7V600-X
USBPW78
USBPW56
2
1 2
3
®
+5V
(Default)
+5VSB
A7V600-X USB Device Wake Up
2. Keyboard power (3-pin KBPWR)
This jumper allows you to enable or disable the keyboard wake-up feature. Set
this jumper to pins 2-3 (+5VSB) if you wish to wake up the computer when you
press a key on the keyboard (the default value is [Disabled]). This feature
requires an ATX power supply that can supply at least 1A on the +5VSB lead,
and a corresponding setting in the BIOS (see section 4.5.1 Power Up Control).
KBPWR
1 2
2 3
+5V
(Default)
+5VSB
A7V600-X
®
A7V600-X Keyboard Power Setting
1-16
Chapter 1: Motherboard Information
3. Clear RTC RAM (CLRTC)
These jumpers allow you to clear the Real Time Clock (RTC) RAM in CMOS.
You can clear the CMOS memory of date, time, and system setup parameters
by erasing the CMOS RTC RAM data. The RAM data in CMOS is powered by
the onboard button cell battery.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Remove the battery.
3. Move the jumper cap to pin [1-2] to clear CMOS then replace the jumper
cap back to pin [2-3] after 3 seconds.
4. Re-install the battery.
5. Plug the power cord and turn ON the computer.
6. Hold down the <Del> key during the boot process and enter BIOS setup
to re-enter data.
CLRTC
A7V600-X
3
2
2
1
Clear CMOS
Normal
®
(Default)
A7V600-X Clear RTC RAM
4. VCORE over-voltage (3-pin OVER_VOLT1)
When enabled, this jumper allows CPU VCORE ranges of 1.7V to 2.05V.
When this jumper is disabled, VCORE setting has a range of +1.5V to +1.85V.
You may adjust the CPU VCORE through the BIOS Setup.
Setting to a very high core voltage may cause permanent damage to the CPU.
It is recommended that you keep the default setting (Disable).
OVER_VOLT1
1 2
2 3
Enable
Disable
(Default)
A7V600-X
®
A7V600-X OVER_VOLT Setting
ASUS A7V600-X Motherboard
1-17
1.12 Connectors
This section describes and illustrates the connectors on the motherboard.
1. IDE connectors (40-1 pin PRI_IDE, SEC_IDE)
This connector supports the provided UltraDMA/133/100/66 IDE hard disk
ribbon cable. Connect the cable’s blue connector to the primary
(recommended) or secondary IDE connector, then connect the gray connector
to the UltraDMA/133/100/66 slave device (hard disk drive) and the black
connector to the UltraDMA/133/100/66 master device. It is recommended that
you connect non-UltraDMA/133/100/66 devices to the secondary IDE
connector. If you install two hard disks, you must configure the second drive as
a slave device by setting its jumper accordingly. Refer to the hard disk
documentation for the jumper settings. BIOS supports specific device bootup.
If you have more than two UltraDMA/133/100/66 devices, purchase another
UltraDMA/133/100/66 cable. You may configure two hard disks to be both
master devices with two ribbon cables – one for the primary IDE connector and
another for the secondary IDE connector.
1. Pin 20 on each IDE connector is removed to match the covered hole on the
UltraDMA cable connector. This prevents incorrect orientation when you
connect the cables.
2. The hole near the blue connector on the UltraDMA/133/100/66 cable is
intentional.
NOTE: Orient the red markings
(usually zigzag) on the IDE
ribbon cable to PIN 1.
A7V600-X
®
PIN 1
PIN 1
A7V600-X IDE Connectors
For UltraDMA/133/100/66 IDE devices, use an 80-conductor IDE cable. The
UltraDMA/66 cable included in the motherboard package also supports
UltraDMA/133/100.
1-18
Chapter 1: Motherboard Information
2. Floppy disk drive connector (34-1 pin FLOPPY)
This connector supports the provided floppy drive ribbon cable. After
connecting one end to the motherboard, connect the other end to the floppy
drive. (Pin 5 is removed to prevent incorrect insertion when using ribbon cables
with pin 5 plug).
FLOPPY
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
A7V600-X
PIN 1
®
A7V600-X Floppy Disk Drive Connector
3. Chassis intrusion connector (4-1 pin CHASSIS)
This lead is for a chassis designed with intrusion detection feature. This
requires an external detection mechanism such as a chassis intrusion sensor
or microswitch. When you remove any chassis component, the sensor
triggers and sends a high-level signal to this lead to record a chassis
intrusion event.
By default, the pins labeled “Chassis Signal” and “Ground” are shorted with a
jumper cap. If you wish to use the chassis intrusion detection feature, remove
the jumper cap from the pins.
CHASSIS
A7V600-X
®
(Default)
A7V600-X Chassis Alarm Lead
ASUS A7V600-X Motherboard
1-19
4. CPU and Chassis Fan Connectors (3-pin CPU_FAN, CHA_FAN)
The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or a
total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan
connectors on the motherboard, making sure that the black wire of each cable
matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Lack of sufficient
air flow within the system may damage the motherboard components. These
are not jumpers! DO NOT place jumper caps on the fan connectors!
CPU_FAN
A7V600-X
CHA_FAN
®
A7V600-X 12-Volt Fan Connectors
5. ATX power connectors (20-pin ATXPWR1)
These connectors connect to an ATX 12V power supply. The plugs from the
power supply are designed to fit these connectors in only one orientation. Find
the proper orientation and push down firmly until the connectors completely fit.
Make sure that your ATX 12V power supply can provide 8A on the +12V lead
and at least 1A on the +5-volt standby lead (+5VSB). The minimum
recommended wattage is 230W, or 300W for a fully configured system. The
system may become unstable and may experience difficulty powering up if the
power supply is inadequate.
ATXPWR1
+3.3VDC
-12.0VDC
GND
+3.3VDC
+3.3VDC
GND
PS_ON#
GND
+5.0VDC
GND
A7V600-X
GND
GND
+5.0VDC
GND
-5.0VDC
+5.0VDC
+5.0VDC
PWR_OK
+5VSB
+12.0VDC
®
A7V600-X ATX Power Connector
1-20
Chapter 1: Motherboard Information
6. USB header (4-1 pin USB56, USB78)
If the USB ports on the rear panel are inadequate, a USB header is available
for additional USB ports. The USB header complies with USB 2.0 specification
that supports up to 480 Mbps connection speed. This speed advantage over
the conventional 12 Mbps on USB 1.1. Connect a USB 2.0 module to this
connector.
A7V600-X
USB56
USB78
®
1
1
A7V600-X USB 2.0 Header
The USB 2.0 module is purchased separately.
7. Internal audio connectors (4-pin CD, AUX)
These connectors allow you to receive stereo audio input from sound sources
such as a CD-ROM, TV tuner, or MPEG card.
A7V600-X
AUX(White)
CD(Black)
®
A7V600-X Internal Audio Connectors
ASUS A7V600-X Motherboard
1-21
8. GAME/MIDI connector (16-1 pin GAME)
This connector supports a GAME/MIDI module. Connect the GAME/MIDI cable
with yellow connector to the yellow header onboard. The GAME/MIDI port on
the module connects a joystick or a game pad for playing games, and MIDI
devices for playing or editing audio files.
A7V600-X
GAME
®
A7V600-X Game Connector
The GAME/MIDI module is purchased separately.
9. Front panel audio connector (10-1 pin FP_AUDIO)
This is an interface for the Intel front panel audio cable that allow convenient
connection and control of audio devices.
Remove the caps from the Line out_R, BLINE_OUT_R, Line out_L and
BLINE_OUT_L jumpers if you want to install an Intel front panel audio cable.
A7V600-X
FP_AUDIO
®
A7V600-X Front Panel Audio Connector
1-22
Chapter 1: Motherboard Information
10. Serial ATA connector (7-pin SATA1, SATA2)
These connectors accommodate the primary serial ATA (SATA1) and a
secondary serial ATA (SATA2) cables. Connect the serial ATA cable to this
connector then install to a serial ATA ready hard disk.
A7V600-X
SATA2
SATA1
®
A7V600-X SATA Connectors
The SATA cable is purchased separately.
11. System panel connector (20-pin PANEL1)
This connector accommodates several system front panel functions.
Speaker
Connector
Power LED
A7V600-X
Reset SW
IDE_LED
ATX Power
Switch*
®
SMI Lead
*
Requires an ATX power supply.
A7V600-X System Panel Connectors
•
•
System Power LED Lead (3-1 pin PLED)
This 3-1 pin connector connects to the system power LED. The LED lights up
when you turn on the system power, and blinks when the system is in sleep
mode.
System Warning Speaker Lead (4-pin SPKR)
This 4-pin connector connects to the case-mounted speaker and allows you to
hear system beeps and warnings.
ASUS A7V600-X Motherboard
1-23
•
•
Reset Switch Lead (2-pin RESET)
This 2-pin connector connects to the case-mounted reset switch for rebooting
the system without turning off the system power.
ATX Power Switch/Soft-off Switch Lead (2-pin PWR)
This connector connects a switch that controls the system power. Pressing the
power switch turns the system between ON and SLEEP, or ON and SOFT
OFF, depending on the BIOS or OS settings. Pressing the power switch while
in the ON mode for more than 4 seconds turns the system OFF.
•
•
System Management Interrupt Lead (2-pin SMI)
This 2-pin connector allows you to manually place the system into a suspend
mode, or “green” mode, where system activity is instantly decreased to save
power and to expand the life of certain system components. Attach the case-
mounted suspend switch to this 2-pin connector.
Hard Disk Activity Lead (2-pin IDE_LED)
This connector supplies power to the hard disk activity LED. The read or write
activities of any device connected to the primary or secondary IDE connector
cause this LED to light up.
1-24
Chapter 1: Motherboard Information
Chapter 2
This chapter tells how to change the system
settings through the BIOS setup menus. Detailed
descriptions of the BIOS parameters are also
provided.
ASUS A7V600-X motherboard
2-1
2.1 Managing and Updating your BIOS
It is recommended that you save a copy of the motherboard’s original BIOS to
a bootable floppy disk in case you need to reinstall the original BIOS later.
2.1.1 Using ASUS EZ Flash to update the BIOS
The ASUS EZ Flash feature allows you to easily update the BIOS without having to
go through the long process of booting from a diskette and using a DOS-based
utility. The EZ Flash is built-in the BIOS firmware so it is accessible by simply
pressing <Alt> + <F2> during the Power-On Self Tests (POST).
Follow these steps to update the BIOS using ASUS EZ Flash.
1. Download the latest BIOS file from the ASUS website (see ASUS contact
information on page x). Save the file to a floppy disk.
Write down the BIOS file name on a piece of paper. You need to type the exact
BIOS file name at the EZ Flash screen.
2. Reboot the computer.
3. To use EZ Flash, press <Alt> + <F2> during POST to display the following
screen.
ASUS EZ Flash V1.00
Copyright (C) 2002, ASUSTeK COMPUTER INC.
[Onboard BIOS Information]
BIOS Version
BIOS Model
: ASUS A7V600-X BIOS Revision 1001 Beta 003
: A7V600-X
BIOS Built Date : 06/03/03
Please Enter File Name for NEW BIOS: _
*Note: EZ Flash will copy file from A:\, Press [ESC] to reboot
The BIOS information in the above screen is for reference only. What you see
on your screen may not be exactly the same as shown.
4. Insert the disk that contains the new BIOS file into the floppy drive. You will
receive the error message, “WARNING! Device not ready.” if you proceed to
step 5 without the disk in the drive.
2-2
Chapter 2: BIOS Information
5. At the prompt, “Please Enter File Name for NEW BIOS: _”, type in the BIOS file
name that you downloaded from the ASUS website, then press <Enter>.
EZ Flash will automatically access drive A to look for the file name that you
typed. When found, the following message appears on screen.
If you accidentally typed in a wrong BIOS file name, the error message,
“WARNING! File not found.” appears. Press <Enter> to remove the message,
then type in the correct file name. Press <Enter>.
6. At the query prompt, type
Y
to continue with the update process. Pressing
N
exits the EZ Flash screen and reboots the system without updating the BIOS.
The following prompts appear if you typed
Y.
[BIOS Information in File]
BIOS Version: A7V600-X Boot Block
WARNING! Continue to update the BIOS (Y/N)? _
7. Press
Y
for both items to completely update the main BIOS area and the boot
block area.
Flash Memory: SST 49LF004
1. Update Main BIOS area
2. Update Boot Block area
(Y/N)? _
(Y/N)? _
DO NOT shutdown or reset the system while updating the BIOS boot block
area! Doing so may cause system boot failure.
8. When the update process is done, the message, “Press a key to reboot”
appears. Press any key to reboot the system with the new BIOS.
ASUS A7V600-X motherboard
2-3
The BIOS information in the above screen is for reference only. What you see
on your screen may not be exactly the same as shown.
2.1.2 Using AFLASH to update the BIOS
Creating a bootable disk
AFLASH.EXE is a Flash Memory Writer utility that updates the BIOS by uploading
a new BIOS file to the programmable flash ROM on the motherboard. This file
works only in DOS mode. To determine the BIOS version of your motherboard,
check the last four numbers of the code displayed on the upper left-hand corner of
your screen during bootup. Larger numbers represent a newer BIOS file.
1. Type FORMAT A:/S at the DOS prompt to create a bootable system disk. DO
NOT copy AUTOEXEC.BAT and CONFIG.SYS to the disk.
2. Type COPY D:\AFLASH\AFLASH.EXE A:\ (assuming D is your CD-ROM drive)
to copy AFLASH.EXE to the boot disk you created.
AFLASH works only in DOS mode. It does not work with certain memory drivers
that may be loaded when you boot from the hard drive. It is recommended that
you reboot using a floppy disk.
3. Reboot the computer from the floppy disk.
BIOS setup must specify “Floppy” as the first item in the boot sequence.
4. In DOS mode, type A:\AFLASH <Enter> to run AFLASH.
If the word “unknown” appears after Flash Memory:, the memory chip is either
not programmable or is not supported by the ACPI BIOS and therefore, cannot
be programmed by the Flash Memory Writer utility.
2-4
Chapter 2: BIOS Information
5. Select 1. Save Current BIOS to File from the Main menu and press <Enter>.
The Save Current BIOS To File screen appears.
6. Type a filename and the path, for example, A:\XXX-XX.XXX, then press
<Enter>.
Updating the BIOS
Update the BIOS only if you are sure that the new BIOS revision will solve your
problems. Careless updating may result to more problems with the
motherboard!
1. Download an updated ASUS BIOS file from the Internet (WWW or FTP) (see
ASUS CONTACT INFORMATION on page x for details) and save to the boot
floppy disk you created earlier.
2. Boot from the floppy disk.
3. At the “A:\” prompt, type AFLASH and then press <Enter>.
4. At the Main Menu, type 2 then press <Enter>. The Update BIOS Including Boot
Block and ESCD screen appears.
5. Type the filename of your new BIOS and the path, for example, A:\XXX-
XX.XXX, then press <Enter>.
To cancel this operation, press <Enter>.
ASUS A7V600-X motherboard
2-5
6. When prompted to confirm the BIOS update, press Y to start the update.
7. The utility starts to program the new BIOS information into the Flash ROM. The
boot block is updated automatically only when necessary. When the
programming is done, the message “Flashed Successfully” appears.
8. Follow the onscreen instructions to continue.
DO NOT turn off the system while updating the BIOS. This may cause boot
problems. Just repeat the process, and if the problem persists, load the original
BIOS file you saved to the boot disk. If the Flash Memory Writer utility is not
able to successfully update a complete BIOS file, call the ASUS service center
for support.
2-6
Chapter 2: BIOS Information
2.1.3 Recovering the BIOS with CrashFree BIOS 2
The CrashFree BIOS 2 auto recovery tool allows you to restore BIOS from the
motherboard support CD, or from a floppy disk that contains the BIOS file, in case
the current BIOS on the motherboard fails or gets corrupted.
1. Prepare the support CD that came with the motherboard or a floppy disk
that contains the motherboard BIOS before proceeding with the BIOS
update process.
2. If you have saved a copy of the original motherboard BIOS to a bootable
floppy disk, you may also use this disk to restore the BIOS. See section
“4.1.1 Creating a bootable floppy disk.”
To recover the BIOS from a floppy disk:
1. Boot the system.
2. When a corrupted BIOS is detected, the following screen message appears.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
3. Insert a floppy disk that contains the original or the latest BIOS file for this
motherboard. If all the necessary files are found in the floppy disk, the BIOS
update process continues.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
Floppy found!
Reading file “A7V600-X.rom”. Completed.
Start flashing...
DO NOT shutdown or reset the system while updating the BIOS! Doing so may
cause system boot failure!
4. When the BIOS update process is complete, reboot the system.
ASUS A7V600-X motherboard
2-7
To recover the BIOS from the support CD:
1. Boot the system.
2. When a corrupted BIOS is detected, the following screen message appears.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
If there is no floppy disk found in the drive, the system automatically checks the
CD-ROM.
3. Place the support CD in the CD-ROM. The support CD contains the original
BIOS for this motherboard.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
Floppy not found!
Checking for CD-ROM...
CD-ROM found.
Reading file “A7V600-X.rom”. Completed.
Start flashing...
DO NOT shutdown or reset the system while updating the BIOS! Doing so may
cause system boot failure!
4. When the BIOS update process is complete, reboot the system.
The recovered BIOS may not be the latest BIOS version for this motherboard.
2-8
Chapter 2: BIOS Information
2.2 BIOS Setup program
Use the BIOS Setup program when you are installing a motherboard, reconfiguring
your system, or prompted to “Run Setup”. This section explains how to configure
your system using this utility.
Even if you are not prompted to use the Setup program, you may want to change the
configuration of your computer in the future. For example, you may want to enable
the security password feature or make changes to the power management settings.
This requires you to reconfigure your system using the BIOS Setup program so that
the computer can recognize these changes and record them in the CMOS RAM of
the EEPROM.
The EEPROM on the motherboard stores the Setup utility. When you start up the
computer, the system provides you with the opportunity to run this program. Press
<Delete> during the Power-On Self Test (POST) to enter the Setup utility, otherwise,
POST continues with its test routines.
The Setup program is designed to make it as easy to use as possible. It is a menu-
driven program, which means you can scroll through the various sub-menus and
make your selections among the predetermined choices.
Because the BIOS software is constantly being updated, the following BIOS
setup screens and descriptions are for reference purposes only, and may not
exactly match what you see on your screen.
2.2.1 BIOS menu bar
The top of the screen has a menu bar with the following selections:
MAIN
Use this menu to make changes to the basic system
configuration.
ADVANCED
POWER
BOOT
Use this menu to enable and make changes to the advanced
features.
Use this menu to configure and enable Power Management
features.
Use this menu to configure the default system device used to
locate and load the Operating System.
EXIT
Use this menu to exit the current menu or to exit the Setup
program.
To access the menu bar items, press the right or left arrow key on the keyboard
until the desired item is highlighted.
ASUS A7V600-X motherboard
2-9
2.2.2 Legend bar
At the bottom of the Setup screen is a legend bar. The keys in the legend bar allow
you to navigate through the various setup menus. The following table lists the keys
found in the legend bar with their corresponding functions.
Navigation Key(s)
<F1> or <Alt + H>
Function Description
Displays the General Help screen from anywhere in
the BIOS Setup
<Esc>
Jumps to the Exit menu or returns to the main menu
from a sub-menu
Left or Right arrow
Up or Down arrow
- (minus key)
Selects the menu item to the left or right
Moves the highlight up or down between fields
Scrolls backward through the values for the high-
lighted field
+ (plus key) or spacebar
<Enter>
Scrolls forward through the values for the highlighted
field
Brings up a selection menu for the highlighted field
<Home> or <PgUp>
<End> or <PgDn>
<F5>
Moves the cursor to the first field
Moves the cursor to the last field
Resets the current screen to its Setup Defaults
Saves changes and exits Setup
<F10>
General help
In addition to the Item Specific Help window, the BIOS setup program also provides
a General Help screen. You may launch this screen from any menu by simply pressing
<F1> or the <Alt> + <H> combination. The General Help screen lists the legend keys
and their corresponding functions.
Saving changes and exiting the Setup program
See “2.7 Exit Menu” for detailed information on saving changes and exiting the setup
program.
When a scroll bar appears to the right of a help window, it indicates that there is more
information to be displayed that will not fit in the window. Use <PgUp> and <PgDn>
or the up and down arrow keys to scroll through the entire help document. Press
<Home> to display the first page, press <End> to go to the last page. To exit the help
window, press <Enter> or <Esc>.
2-10
Chapter 2: BIOS Information
Sub-menu
Note that a right pointer symbol (as shown on
the left) appears to the left of certain fields. This pointer
indicates that you can display a sub-menu from this field.
A sub-menu contains additional options for a field
parameter. To display a sub-menu, move the highlight
to the field and press <Enter>. The sub-menu appears.
Use the legend keys to enter values and move from
field to field within a sub-menu as you would within a
menu. Use the <Esc> key to return to the main menu.
Take some time to familiarize yourself with the legend
keys and their corresponding functions. Practice
navigating through the various menus and sub-menus.
If you accidentally make unwanted changes to any of
the fields, use the set default hot key <F5> to load the Setup default values. While
moving around through the Setup program, note that explanations appear in the Item
Specific Help window located to the right of each menu. This window displays the
help text for the currently highlighted field.
2.3 Main Menu
When you enter the Setup program, the following screen appears.
System Time [XX:XX:XX]
Sets the system to the time that you specify (usually the current time). The format
is hour, minute, second. Valid values for hour, minute and second are Hour: (00 to
23), Minute: (00 to 59), Second: (00 to 59). Use the <Tab> or <Shift> + <Tab> keys
to move between the hour, minute, and second fields.
System Date [XX/XX/XXXX]
Sets the system to the date that you specify (usually the current date). The format
is month, day, year. Valid values for month, day, and year are Month: (1 to 12),
Day: (1 to 31), Year: (up to 2099). Use the <Tab> or <Shift> + <Tab> keys to move
between the month, day, and year fields.
ASUS A7V600-X motherboard
2-11
Legacy Diskette A, B [1.44M, 3.5 in.]
Sets the type of floppy drive installed. Configuration options: [None] [360K, 5.25
in.] [1.2M , 5.25 in.] [720K , 3.5 in.] [1.44M, 3.5 in.] [2.88M, 3.5 in.]
Floppy 3 Mode Support [Disabled]
This is required to support older Japanese floppy drives. The Floppy 3 Mode feature
allows reading and writing of 1.2MB (as opposed to 1.44MB) on a 3.5-inch diskette.
Configuration options: [Disabled] [Enabled]
Language [English US]
This field allows you to choose the BIOS language version from the available
options.
Chassis Intrusion Detection [Disabled]
This field allows you to enable or disable the chassis intrusion detection feature.
Supervisor Password [Disabled] / User Password [Disabled]
These fields allow you to set passwords. To set a password, highlight the
appropriate field and press <Enter>. Type in a password then press <Enter>. You
can type up to eight alphanumeric characters. Symbols and other characters are
ignored. To confirm the password, type the password again and press <Enter>.
The password is now set to [Enabled]. This password allows full access to the
BIOS Setup menus. To clear the password, highlight this field and press <Enter>.
The same dialog box as above appears. Press <Enter>. The password is set to
[Disabled].
Make a copy of the original BIOS on a bootable floppy disk before setting
passwords. You will need to upload the BIOS file in case you erase the CMOS
RAM in the future.
A note about passwords
The BIOS Setup program allows you to specify passwords in the Main menu. The passwords
control access to the BIOS during system startup. Passwords are not case sensitive, meaning,
passwords typed in either uppercase or lowercase letters are accepted. The BIOS Setup program
allows you to specify two different passwords: a Supervisor password and a User password. If
you did not set a Supervisor password, anyone can access the BIOS Setup program. If you
did, the Supervisor password is required to enter the BIOS Setup program and to gain full
access to the configuration fields.
Forgot the password?
If you forget your password, you can clear it by erasing the CMOS Real Time Clock (RTC)
RAM. The RAM data containing the password information is powered by the onboard button
cell battery. If you need to erase the CMOS RAM, unplug the all the power cables and remove
the button cell battery. Re-install the battery after about 2 seconds, then power up the system.
Refer to section “2.1 Managing and updating your BIOS” on how to update the BIOS.
2-12
Chapter 2: BIOS Information
Halt On [All Errors]
This field specifies the types of errors that will cause the system to halt.
Configuration options: [All Errors] [No Error] [All but Keyboard] [All but Disk] [All but
Disk/Keyboard]
Installed Memory [XXX MB]
This field automatically displays the amount of conventional memory detected by
the system during the boot process.
2.3.1 Primary and Secondary Master/Slave
Type [Auto]
Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection
is successful, Setup automatically fills in the correct values for the remaining fields
on this sub-menu. If automatic detection fails, select [User Type HDD] to manually
enter the IDE hard disk drive parameters. Refer to the next section for details.
Before attempting to configure a hard disk drive, make sure you have the correct
configuration information supplied by the drive manufacturer.
[User Type HDD]
Manually enter the number of cylinders, heads and sectors per track for the drive.
Refer to the drive documentation or label for this information.
ASUS A7V600-X motherboard
2-13
If no drive is installed or if you are removing a drive and not replacing it, select
[None].
Other options for the Type field are:
[CD-ROM] - for IDE CD-ROM drives
[LS-120] - for LS-120 compatible floppy disk drives
[ZIP] - for ZIP-compatible disk drives
[MO] - for IDE magneto optical disk drives
[Other ATAPI Device] - for IDE devices not listed here
After making your selections on this sub-menu, press the <Esc> key to return to
the Main menu. When the Main menu appears, the hard disk drive field displays
the size for the hard disk drive that you configured.
Translation Method [LBA]
Select the hard disk drive type in this field. When Logical Block Addressing (LBA)
is enabled, the 28-bit addressing of the hard drive is used without regard for
cylinders, heads, or sectors. Note that LBA Mode is necessary for drives with more
than 504MB storage capacity. Configuration options: [LBA] [LARGE] [Normal]
[Match Partition Table] [Manual]
Cylinders
This field configures the number of cylinders. Refer to the drive documentation to
determine the correct value. To make changes to this field, set the Type field to
[User Type HDD] and the Translation Method field to [Manual].
Head
This field configures the number of read/write heads. Refer to the drive
documentation to determine the correct value. To make changes to this field, set
the Type field to [User Type HDD] and the Translation Method field to [Manual].
Sector
This field configures the number of sectors per track. Refer to the drive
documentation to determine the correct value. To make changes to this field, set
the Type field to [User Type HDD] and the Translation Method field to [Manual].
CHS Capacity
This field shows the drive’s maximum CHS capacity as calculated by the BIOS
based on the drive information you entered.
Maximum LBA Capacity
This field shows the drive’s maximum LBA capacity as calculated by the BIOS
based on the drive information you entered.
2-14
Chapter 2: BIOS Information
Multi-Sector Transfers [Maximum]
This option automatically sets the number of sectors per block to the highest
number that the drive supports. Note that when this field is automatically
configured, the set value may not always be the fastest value for the drive. You
may also manually configure this field. Refer to the documentation that came with
the hard drive to determine the optimum value and set it manually. To make
changes to this field, set the Type field to [User Type HDD]. Configuration options:
[Disabled] [2 Sectors] [4 Sectors] [8 Sectors] [16 Sectors] [32 Sectors] [Maximum]
SMART Monitoring [Disabled]
This field allows you to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis
and Reporting Technology) system that utilizes internal hard disk drive monitoring
technology. This parameter is normally disabled because the resources used in the
SMART monitoring feature may decrease system performance. Configuration
options: [Disabled] [Enabled]
PIO Mode [4]
This option lets you set a PIO (Programmed Input/Output) mode for the IDE
device. Modes 0 through 4 provide successive increase in performance.
Configuration options: [0] [1] [2] [3] [4]
Ultra DMA Mode [Disabled]
Ultra DMA capability allows improved transfer speeds and data integrity for
compatible IDE devices. Set to [Disabled] to suppress Ultra DMA capability. To
make changes to this field, set the Type field to [User Type HDD]. Configuration
options: [0] [1] [2] [3] [4] [5] [6] [Disabled]
2.3.2 Keyboard Features
Boot Up NumLock Status [On]
This field enables users to activate the Number Lock function upon system boot.
Configuration options: [Off] [On]
Keyboard Auto-Repeat Rate [12/Sec]
This controls the speed at which the system registers repeated keystrokes.
Options range from 6 to 30 characters per second. Configuration options: [6/Sec]
[8/Sec] [10/Sec] [12/Sec] [15/Sec] [20/Sec] [24/Sec] [30/Sec]
ASUS A7V600-X motherboard
2-15
Keyboard Auto-Repeat Delay [1/4 Sec]
This field sets the time interval for displaying the first and second characters.
Configuration options: [1/4 Sec] [1/2 Sec] [3/4 Sec] [1 Sec]
2.4 Advanced Menu
CPU Speed
This displays the current speed of the CPU installed.
CPU Frequency Multiple
This field displays frequency multiple value between the CPU’s internal frequency
(CPU speed) and external frequency.
CPU External Frequency (MHz)
This feature tells the clock generator what frequency to send to the system bus
and PCI bus. The bus frequency (external frequency) multiplied by the bus multiple
equals the CPU speed.
Memory Frequency (MHz)
This field determines the memory clock frequency. Configuration options: [Auto]
[266] [333] [400].
CPU VCore Setting [Auto]
The [Manual] setting allows you to manually select the core voltage
supplied to the CPU (see next item). It is recommended that you keep the
default setting [Auto] to allow the system to automatically determine the
appropriate CPU core voltage.
CPU VCore
When the CPU VCore Setting parameter above is set to [Manual], the
CPU VCore item allows you to select a specific CPU core voltage. This
field is not accessible when the CPU VCore Setting is set to [Auto].
2-16
Chapter 2: BIOS Information
CPU Level 1 Cache, CPU Level 2 Cache [Enabled]
These fields allow you to choose from the default [Enabled] or choose [Disabled] to
turn on or off the CPU Level 1 and Level 2 built-in cache. Configuration options:
[Disabled] [Enabled]
PS/2 Mouse Function Control [Auto]
The default setting [Auto] allows the system to detect a PS/2 mouse at startup. If a
mouse is detected, the BIOS assigns IRQ12 to the PS/2 mouse. Otherwise, IRQ12
can be used for expansion cards. When you set this field to [Enabled], BIOS
reserves IRQ12, whether or not a PS/2 mouse is detected at startup. Configuration
options: [Enabled] [Auto]
USB Legacy Support [Auto]
This motherboard supports Universal Serial Bus (USB) devices. The default of
[Auto] allows the system to detect a USB device at startup. If detected, the USB
controller legacy mode is enabled. If not detected, the USB controller legacy mode
is disabled.
When you set this field to [Disabled], the USB controller legacy mode is disabled
whether or not you are using a USB device. Configuration options: [Disabled]
[Enabled] [Auto]
OS/2 Onboard Memory > 64M [Disabled]
When using OS/2 operating systems with installed DRAM of greater than 64MB,
you need to set this option to [Enabled]. Otherwise, leave to the default setting
[Disabled]. Configuration options: [Disabled] [Enabled]
Instant Music [Disabled]
Allows you to enable or disable the Instant Music feature in BIOS.
Configuration options: [Disabled] [Enabled]
When Instant Music is enabled, the PS/2 keyboard power up feature is
automatically disabled.
Instant Music CD ROM
Allows you to select the CD-ROM drive that you wish to use for the Instant Music
CD playback. Configuration options depends on the optical drives installed on your
system.
The above item appears only if you enabled the Instant Music item.
ASUS A7V600-X motherboard
2-17
2.4.1 Chip Configuration
SDRAM Configuration [By SPD]
This parameter allows you to set the optimal timings for items 2–5, depending on
the memory modules that you are using. The default setting is [By SPD], which
configures items 2–5 by reading the contents in the SPD (Serial Presence Detect)
device. The EEPROM on the memory module stores critical information about the
module, such as memory type, size, speed, voltage interface, and module banks.
Configuration options: [User Defined] [By SPD]
The SDRAM parameters (items 2~5) become configurable only when you set
the SDRAM Configuration to [User Defined].
SDRAM CAS Latency (value depends on SDRAM SPD)
This item controls the latency between the SDRAM read command and the time
the data actually becomes available. Configuration options: [1.5T] [2T] [2.5T]
SDRAM RAS to CAS Delay (value depends on SDRAM SPD)
This item controls the latency between the DDR SDRAM active command and the
read/write command. Configuration options: [5T] [4T] [3T] [2T].
SDRAM RAS Precharge Delay (value depends on SDRAM SPD)
This item controls the idle clocks after issuing a precharge command to the DDR
SDRAM. Configuration options: [5T] [4T] [3T] [2T]
SDRAM Active Precharge Delay (value depends on SDRAM SPD)
This item controls the number of DDR SDRAM clocks used for DDR SDRAM
parameters. Configuration options: [9T] [8T] [7T] [6T]
SDRAM 1T Command Control
Configuration options: [Disabled] [Enabled] [Auto]
2-18
Chapter 2: BIOS Information
SDRAM Bank Interleave
Configuration options: [Disabled] [2 Bank] [4 Bank] [Auto]
Graphics Aperture Size [64MB]
This feature allows you to select the size of mapped memory for AGP graphic data.
Configuration options: [4MB] [8MB] [16MB] [32MB] [64MB] [128MB] [256MB]
[512MB] [1024MB]
The [1024MB] and [512MB] configuration options are available only
when you use AGP 8X graphics card.
AGP Capability [8X Mode]
This motherboard supports the AGP 8X interface that enables enhanced graphics
performance with high bandwidth speeds up to 2.12GB/s. AGP8X is backward-
compatible. When set to [1X Mode], the AGP interface only provides a peak data
throughput of 266MB/s even if you are using an AGP 8X card.
Configuration options: [Auto] [1X Mode] [2X Mode] [4X Mode] [8X Mode]
AGP Drive Strength [Auto]
Configuration options: [Auto] [Manual]
Configuration options: [0][1][2][3][4][5][6][7][8][9][A][B][C][D][E][F]
AGP performance control [Disabled]
Configuration options: [Disabled] [Enabled]
AGP Fast Write control [Disabled]
Configuration options: [Disabled] [Enabled]
Video Memory Cache Mode [UC]
USWC (uncacheable, speculative write combining) is a new cache technology for
the video memory of the processor. It can greatly improve the display speed by
caching the display data. You must set this to UC (uncacheable) if your display
card does not support this feature, otherwise the system may not boot.
Configuration options: [UC] [USWC]
DRAM Burst Length 8QW [Disabled]
This item enables or disables the DRAM Burst Length 8QW. Configuration options:
[Disabled] [Auto]
Rank Interleave [Disabled]
This item enables or disables the rank interleave item. Configuration options:
[Disabled] [Auto]
ASUS A7V600-X motherboard
2-19
2.4.2 I/O Device Configuration
Onboard FDC Swap A & B
These fields set option to switch drive letter assignments. Configuration Options:
[No Swap] [Swap AB]
Floppy Disk Access Control [R/W]
When set to [Read Only], this item protects files from being copied to floppy disks
by allowing reads from, but not writes to, the floppy disk drive. The default setting
[R/W] allows both reads and writes. Configuration options: [R/W] [Read Only]
Onboard Serial Port 1 [3F8H/IRQ4]
This field allows you to set the address for the onboard serial connector.
Configuration options: [3F8H/IRQ4] [2F8H/IRQ3] [3E8H/IRQ4] [2E8H/IRQ10]
[Disabled]
Onboard Parallel Port [378H/IRQ7]
This field allows you to set the address of the onboard parallel port connector. If
you disable this field, the Parallel Port Mode and ECP DMA Select configurations
are not available. Configuration options: [Disabled] [378H/IRQ7] [278H/IRQ5]
Parallel Port Mode [ECP+EPP]
This field allows you to set the operation mode of the parallel port. [Normal] allows
normal-speed operation but in one direction only; [EPP] allows bidirectional parallel
port operation; [ECP] allows the parallel port to operate in bidirectional DMA mode;
[ECP+EPP] allows normal speed operation in a two-way mode. Configuration
options: [Normal] [EPP] [ECP] [ECP+EPP]
2-20
Chapter 2: BIOS Information
ECP DMA Select [3]
This field allows you to configure the parallel port DMA channel for the selected
ECP mode. This selection is available only if you select [ECP] or [ECP+EPP] in
Parallel Port Mode above. Configuration options: [1] [3]
Onboard Game Port [200H-207H]
These fields allow you to set the addresses for the onboard game connectors.
Game ports must have different addresses.
Configuration options: [200H/207H]
[208H-20FH] [Disabled]
Onboard MIDI I/O [Disabled]
These fields allow you to set the addresses for the onboard MIDI connectors. MIDI
ports must have different addresses. Configuration options: [330H-331H] [300H-
301H] [Disabled]
USB Controller [Enabled]
These fields allow you to enable or disable the onboard USB
controller.Configuration options: [Disabled] [Enabled]
USB Device Mode [Disabled]
These fields allow you to enable or disable the USB device mode Configuration
options: [Disabled] [Enabled]
Onboard PCI IDE [Both]
These fields allow you to select or disable the onboard PCI IDE drive for use.
Configuration options: [Both] [Primary] [Secondary] [Disabled]
Onboard LAN [Enabled]
These fields allow you to enable or disable the onboard LAN controller.
Configuration options: [Disabled] [Enabled]
Onboard LAN Boot ROM [Enabled]
These fields allow you to enable or disable the onboard LAN boot ROM.
Configuration options: [Disabled] [Enabled]
Onboard ATA Boot ROM [Enabled]
These fields allow you to enable or disable the onboard Serial ATA controller boot
ROM. Configuration options: [Disabled] [Enabled]
Onboard AC97 Audio Controller [Auto]
These fields allow you to disable or set to auto detect the onboard AC97 audio
controller.Configuration options: [Auto] [Disabled]
ASUS A7V600-X motherboard
2-21
2.4.3 PCI Configuration
Slot 1/5, Slot 2/6, Slot 3, Slot 4 IRQ [Auto]
These fields automatically assign the IRQ for each PCI slot. The default setting for
each field is [Auto], which utilizes auto-routing to determine IRQ assignments.
Configuration options: [Auto] [NA] [3] [4] [5] [7] [9] [10] [11] [12] [14] [15]
PCI/VGA Palette Snoop [Disabled]
Some non-standard VGA cards, like graphics accelerators or MPEG video cards,
may not show colors properly. Setting this field to [Enabled] corrects this problem.
If you are using standard VGA cards, leave this field to the default setting
[Disabled]. Configuration options: [Disabled] [Enabled]
PCI Latency Timer [32]
Leave this field to the default setting [32] for best performance and stability.
PCI Delayed Transaction [Disabled]
This field enables or disables the PCI delayed transaction function. Configuration
options: [Disabled] [Enabled]
Primary VGA BIOS [PCI VGA Card]
This field allows you to select the primary graphics card. Configuration options:
[PCI VGA Card] [AGP VGA Card]
Onboard ATA device First [No]
This field allows you to select the onboard ATA first.
Configuration options: [No] [Yes]
2-22
Chapter 2: BIOS Information
PCI IRQ Resource Exclusion
IRQ XX Reserved [No/ICU]
These fields indicate whether or not the displayed IRQ for each field is being used
by a legacy (non-PnP) ISA card. The setting [No/ICU] for an IRQ field indicates that
you are using the ISA Configuration Utility (ICU), and that this particular IRQ is
NOT required by a legacy ISA card. Set the IRQ field to [Yes] if you install a legacy
ISA card that requires a unique IRQ and you are NOT using ICU. Configuration
options: [No/ICU] [Yes]
2.5 Power Menu
The Power menu allows you to reduce power consumption. This feature turns off
the video display and shuts down the hard disk after a period of inactivity.
Power Management [User Defined]
This field allows you to activate or deactivate the automatic power saving features.
When set to [Disabled], the power management features do not function
regardless of the other settings on this menu. The [User Defined] option allows you
to set the period of inactivity before the system enters suspend mode. Refer to
“Suspend Mode” later in this section.
When set to [Max Saving], system power is conserved to its greatest amount. This
setting automatically puts the system into suspend mode after a brief period of
system inactivity. [Min Saving] allows the least power saving as the system enters
suspend mode only after a long period of inactivity. Configuration options: [User
Defined] [Disabled] [Min Saving] [Max Saving]
ASUS A7V600-X motherboard
2-23
You should install the Advanced Power Management (APM) utility to keep the
system time updated even when the computer enters suspend mode. In
Windows 3.x and Windows 95, you need to install Windows with the APM
feature. In Windows 98 or later, APM is automatically installed as indicated by a
battery and power cord icon labeled “Power Management” in the Control Panel.
Select the item “Advanced” in the Power Management Properties dialog box.
Video Off Option [Suspend -> Off ]
This field determines when to activate the video off feature for monitor power
management. Configuration options: [Always On] [Suspend -> Off]
Video Off Method [DPMS OFF]
This field defines the video off features. The Display Power Management System
(DPMS) feature allows the BIOS to control the video display card if it supports the
DPMS feature. [Blank Screen] only blanks the screen. Use this for monitors without
power management or “green” features.
Even if installed, your screen saver does not display when you select [Blank
Screen] for the above field.
[V/H SYNC+Blank] blanks the screen and turns off vertical and horizontal
scanning. Configuration options: [Blank Screen] [V/H SYNC+Blank] [DPMS
Standby] [DPMS Suspend] [DPMS OFF] [DPMS Reduce ON]
HDD Power Down [Disabled]
Shuts down any IDE hard disk drives in the system after a period of inactivity as
set in this user-configurable field. This feature does not affect SCSI hard drives.
Configuration options: [Disabled] [1 Min] [2 Min] [3 Min]...[15 Min]
ACPI Suspend To RAM [Disabled]
This field allows you to enable or disable the ACPI Suspend-to-RAM feature. To
support this feature, the +5VSB of the power supply should have the capacity to
provide more than 720mA current. Configuration options: [Disabled] [Enabled]
Suspend Mode [Disabled]
Sets the time period before the system goes into suspend mode. Configuration
options: [Disabled] [1~2 Min] [2~3 Min] [4~5 min] [8~9 Min] [20 Min] [30 Min]
PWR Button < 4 Secs [Soft Off]
When set to [Soft off], the ATX switch can be used as a normal system power-off
button when pressed for less than 4 seconds. [Suspend] allows the button to have
a dual function where pressing less than 4 seconds puts the system in sleep mode.
Regardless of the setting, holding the ATX switch for more than 4 seconds powers
off the system. Configuration options: [Soft off] [Suspend]
2-24
Chapter 2: BIOS Information
2.5.1 Power Up Control
AC Power Loss Restart [Disabled]
This allows you to set whether or not to reboot the system after power
interruptions. [Disabled] leaves your system off while [Enabled] reboots the
system. [Previous State] sets the system back to the state it was before the power
interruption. Configuration options: [Disabled] [Enabled] [Previous State]
Wake/Power Up On External Modem [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the computer
when the external modem receives a call while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
Wake/Power On By PS/2 Keyboard [Disabled]
This parameter allows you to use specific keys on the keyboard to turn on the
system. This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead. Configuration options: [Disabled] [Space Bar] [Ctrl-Esc] [Power Key]
Wake/Power On By PS/2 Mouse [Disabled]
When set to [Double Click], this parameter allows you to use the PS/2 mouse to
turn on the system. This feature requires an ATX power supply that provides at
least 1A on the +5VSB lead. Configuration options: [Disabled] [Double Click]
Power Up On PCI Card [Disabled]
When set to [Enabled], this parameter allows you to turn on the system through a
PCI LAN or modem card. This feature requires an ATX power supply that provides
at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Automatic Power Up [Disabled]
This allows an unattended or automatic system power up. You may configure your
system to power up at a certain time of the day by selecting [Everyday] or at a
certain time and day by selecting [By Date]. Configuration options: [Disabled]
[Everyday] [By Date]
ASUS A7V600-X motherboard
2-25
Date of Month Alarm
This item appears only when you set the Automatic Power Up item to [By Date].
This allows you to key-in the date of current month to power up the system. Make
sure to set the time of alarm after setting this item.
Time (hh:mm:ss) Alarm
This item appears only when you set the Automatic Power Up item to [By Date]
or [Everyday]. This allows you to key-in the hour, minute and second of the day to
power up the system.
2.5.2 Hardware Monitor
MB Temperature [xxxC/xxxF]
CPU Temperature [xxxC/xxxF]
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures.
CPU Fan Speed [xxxxRPM] or [N/A]
Chassis Fan Speed [xxxxRPM] or [N/A]
The onboard hardware monitor automatically detects and displays the CPU and
chassis fan speeds in rotations per minute (RPM). If any of the fans is not
connected to the motherboard, that field shows N/A.
VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators.
If any of the monitored items is out of range, the following error message
appears: “Hardware Monitor found an error. Enter Power setup menu for
details”. You will then be prompted to “Press F1 to continue or DEL to enter
SETUP”.
2-26
Chapter 2: BIOS Information
2.6 Boot Menu
Boot Sequence
The Boot menu allows you to select four types of boot devices using the up and down
arrow keys. By using the <+> or <Space> key, you can promote devices and by using
the <-> key, you can demote devices. Promotion or demotion of devices alters the
priority which the system uses to boot device on system power up. Configuration
fields include Removable Devices, IDE Hard Drive, ATAPI CD-ROM, and Other Boot
Device.
Removable Device [Legacy Floppy]
Configuration options: [Disabled] [Legacy Floppy] [LS-120] [ZIP] [ATAPI MO] [USB
FDD] [USB ZIP/Flash]
IDE Hard Drive
This field allows you to select which IDE hard disk drive to use in the boot
sequence. Pressing [Enter] will show the product IDs of all connected IDE hard
disk drives.
ATAPI CD-ROM
This field allows you to select which ATAPI CD-ROM drive to use in the boot
sequence. Pressing [Enter] will show the product IDs of all your connected ATAPI
CD-ROM drives.
Other Boot Device [INT18 Device (Network)]
Configuration options: [Disabled] [SCSI Boot Device] [INT18 Device (Network)]
Plug & Play O/S [No]
This field allows you to use a Plug-and-Play (PnP) operating system to configure
the PCI bus slots instead of using the BIOS. When [Yes] is selected, interrupts may
be reassigned by the OS. If you installed a non-PnP OS or if you want to prevent
reassigning of interrupt settings, keep the default setting [No]. Configuration
options: [No] [Yes]
ASUS A7V600-X motherboard
2-27
Reset Configuration Data [No]
The Extended System Configuration Data (ESCD) contain information about non-
PnP devices. It also holds the complete record of how the system was configured
the last time it was booted. Select [Yes] if you want to clear these data during the
Power-On-Self-Test (POST). Configuration options: [No] [Yes]
Boot Virus Detection [Enabled]
This field allows you to set boot virus detection, ensuring a virus-free boot sector.
The system halts and displays a warning message when it detects a virus. If this
occurs, you can either allow the operation to continue or use a virus-free bootable
floppy disk to restart and investigate your system. Configuration options: [Disabled]
[Enabled]
Quick Power On Self Test [Enabled]
This field speeds up the Power-On-Self Test (POST) routine by skipping retesting a
second, third, and fourth time. Configuration options: [Disabled] [Enabled]
Boot Up Floppy Seek [Enabled]
When enabled, the BIOS will seek the floppy disk drive to determine whether the
drive has 40 or 80 tracks. Configuration options: [Disabled] [Enabled]
Full Screen Logo [Enabled]
This allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Interrupt Mode [APIC]
The Advanced Programmable Interrupt Controller (APIC) setting allows you to
distribute interrupt routings other than the 16 IRQs. The Programmable Interrupt
Controller (PIC) setting allows you to use the 16 IRQs only. Configuration options:
[PIC] [APIC]
2-28
Chapter 2: BIOS Information
2.7 Exit Menu
When you have made all of your selections from the various menus in the Setup
program, save your changes and exit Setup. Select Exit from the menu bar to
display the following menu.
Pressing <Esc> does not immediately exit this menu. Select one of the options
from this menu or <F10> from the legend bar to exit.
Exit Saving Changes
Once you are finished making your selections, choose this option from the Exit
menu to ensure the values you selected are saved to the CMOS RAM. The CMOS
RAM is sustained by an onboard backup battery and stays on even when the PC is
turned off. When you select this option, a confirmation window appears. Select
[Yes] to save changes and exit.
If you attempt to exit the Setup program without saving your changes, the
program prompts you with a message asking if you want to save your changes
before exiting. Pressing <Enter> saves the changes while exiting.
Exit Discarding Changes
Select this option only if you do not want to save the changes that you made to the
Setup program. If you made changes to fields other than system date, system
time, and password, the BIOS asks for a confirmation before exiting.
Load Setup Defaults
This option allows you to load the default values for each of the parameters on the
Setup menus. When you select this option or if you press <F5>, a confirmation
window appears. Select [Yes] to load default values. Select Exit Saving Changes
or make other changes before saving the values to the non-volatile RAM.
ASUS A7V600-X motherboard
2-29
Discard Changes
This option allows you to discard the selections you made and restore the
previously saved values. After selecting this option, a confirmation appears. Select
[Yes] to discard any changes and load the previously saved values.
Save Changes
This option saves your selections without exiting the Setup program. You can then
return to other menus and make further changes. After you select this option, a
confirmation window appears. Select [Yes] to save any changes to the non-volatile
RAM.
2-30
Chapter 2: BIOS Information
Chapter 3
This chapter helps you power up your system
and install drivers and utilities that came with the
support CD.
ASUS A7V600-X Motherboard
3-1
3.1 Install an operating system
The A7V600-X motherboard supports Windows ME/2000/XP operating systems
(OS). Always install the latest OS version and corresponding updates so you can
maximize the features of your hardware.
Because motherboard settings and hardware options vary, use the setup
procedures presented in this chapter for general reference only. Refer to your
OS documentation for more information.
3.2 Support CD information
The support CD that came with the motherboard contains useful software and
several utility drivers that enhance the motherboard features.
The contents of the support CD are subject to change at any time without
notice. Visit the ASUS website for updates.
3.2.1 Running the support CD
To begin using the support CD, simply insert the CD into your CD-ROM drive. The
CD automatically displays the Drivers menu if Autorun is enabled in your
computer.
Click an item to install
Click an icon to display
more information
If Autorun is NOT enabled in your computer, browse the contents of the
support CD to locate the file ASSETUP.EXE from the BIN folder. Double-click
the ASSETUP.EXE to run the CD.
3-2
Chapter 3: Starting-Up
3.2.2 Drivers menu
VIA 4 in 1 drivers
This item installs the following drivers:
- VIA Registry (INF) driver
- VIAAGP VxD driver
- VIAATAPI vendor support driver
- VIA PCI IRQ Miniport driver.
VIA RAID Controller driver
This item installs the VIA RAID controller drivers.
SoundMAX Audio Driver
This item installs the ADI 1888 AC’97 compliant audio controller and application.
VIA Rhine Family Fast Ethernet Adapter Driver
This item installs the VIA Fast Ethernet LAN drivers for 10/100Mbps LAN solution.
USB 2.0 Driver
This item installs the USB 2.0 driver to upgrade your USB 1.1 ports to USB 2.0.
Some menu items appear only to specific operating system versions.
3.2.3 Utilities menu
The Utilities menu shows the applications and other software that the motherboard
supports.
ASUS PC Probe
Install utility that can monitor Fan, Speed, Voltage, and CPU temperature.
ASUS A7V600-X Motherboard
3-3
ASUS Update
Installs utility to download and update motherboard BIOS & drivers.
Anti-virus Utility
The anti-virus application scans, identifies, and removes computer viruses.
View the online help for detailed information.
ADOBE Acrobat Reader V5.0
This installs software for viewing files in Portable Document Format (PDF).
ASUS Screen Saver
This item installs the ASUS screen saver.
3.2.4 ASUS Contact Information
Clicking the ASUS Contact Information tab displays as stated. You may also find
this information on page viii of this user guide.
3-4
Chapter 3: Starting-Up
3.3 ASUS Instant Music Lite
The motherboard is equipped with a BIOS-based audio playback feature called
Instant Music Lite. This feature is supported by the onboard audio AC’97
CODEC, and requires an optical drive (CD-ROM, DVD-ROM, or CD-RW).
1. Instant Music Lite only supports CDs in audio format.
2. Instant Music Lite does not work if you installed and enabled an add-on
sound card.
3. Instant Music Lite only supports PS/2 keyboard.
To enable ASUS Instant Music Lite:
1. Connect the analog audio cable from the optical drive (CD-ROM, DVD-ROM,
or CD-RW drive) to the 4-pin CD-In connector (labeled CD1) on the
motherboard. See section “1.12 Connectors” for the connector location.
Make sure to connect the CD-ROM audio cable. Otherwise, you cannot control
the audio volume using the Instant Music Lite function keys.
2. Turn on the system and enter BIOS by pressing the Delete key during the
Power On Self-Tests (POST).
3. In the Advanced Configuration menu, select the item Instant Music and set
it to Enabled. See section “2.4 Advanced Menu” in the user guide.
4. Highlight the Instant Music CDROM item and press Enter to display the
CD-ROM options. Select the CD-ROM drive that you wish to use for this
feature. See section “2.4 Advanced Menu” in the user guide.
If you have only one optical drive (either CD-ROM, DVD-ROM, or CD-RW)
installed in the system, you don’t have to set Instant Music CDROM item. BIOS
automatically detects and displays the installed drive type.
5. Save your changes and exit BIOS Setup.
1. The Scroll Lock LED is fixed to ON after enabling Instant Music.
2. The Caps Lock LED is turns ON when you pause the CD playback.
3. When set to Instant Music Lite mode, the system wake-up features (LAN,
keyboard, mouse, USB) are deactivated. In this case, power up the system
using the power switch.
4. If the system lost connection or did not detect any optical drive, the Instant
Music Lite feature turns OFF (disabled) automatically. A “beep” indicates
this condition.
ASUS A7V600-X Motherboard
3-5
To use ASUS Instant Music Lite:
1. Ensure that the power cord is plugged to a grounded power source, so that the
system has a standby power.
2. Use either one of the two sets of special function keys on your keyboard to
play audio CDs. These keys only function as indicated if you enabled the
Instant Music Lite in BIOS.
Instant Music function keys (Set 1)
CD
ON/OFF
PLAY/PAUSE
STOP/EJECT
PREVIOUS
NEXT
VOL. DOWN
VOL. UP
Esc
F1
F2
F3
F4
F5
F6
F7
F8
Instant Music function keys (Set 2)
CAPS
LOCK LOCK
LED LED
SCROLL
CD ON/OFF
STOP/EJECT
PLAY/PAUSE
PREVIOUS
VOL. DOWN
NEXT
VOL. UP
3. Connect speakers or a headphone to the Line Out (lime colored) port on the
rear panel for audio output. You may also connect a headphone to the
headphone jack on the CD-ROM drive front panel.
4. Place an audio CD on the drive.
5. Press Esc to turn ON Instant Music Lite.
6. Press F1 or the Space Bar to play the first track on the CD.
If there is no CD on the drive and you press F1 or Space Bar, the drive tray
ejects.
7. Refer to the Instant Music function key definitions on the previous page to
select other tracks or control the volume.
8. Press F2 or Enter once to stop playing the CD.
Press F2 or Enter one more time to eject the CD.
3-6
Chapter 3: Starting-Up
3.4 RAID 0 / RAID 1 / JBOD configurations
The motherboard includes a high performance IDE RAID controller integrated in
the VIA® VT8237 southbridge chipset. It supports RAID 0, RAID 1 and JBOD with
two independent Serial ATA channels.
RAID 0 (called data striping) optimizes two identical hard disk drives to read and
write data in parallel, interleaved stacks. Two hard disks perform the same work as
a single drive but at a sustained data transfer rate, double that of a single disk
alone, thus improving data access and storage.
RAID 1 (called data mirroring) copies and maintains an identical image of data
from one drive to a second drive. If one drive fails, the disk array management
software directs all applications to the surviving drive as it contains a complete
copy of the data in the other drive. This RAID configuration provides data
protection and increases fault tolerance to the entire system.
JBOD (for “just a bunch of disks” or sometimes “just a bunch of drives”) is officially
termed as “spanning”. This is used to refer to a computer’s hard disks that haven’t
been configured according the RAID system to increase fault tolerance and
improved data access performance. This RAID system stores the same data
redundantly on multiple drives by combining the drives into one larger logical drive.
ASUS A7V600-X Motherboard
3-7
3.4.1 Install the Serial ATA (SATA) hard disks
The VIA® VT8237 southbridge chipset supports Serial ATA hard disk drives. For
optimal performance, install identical drives of the same model and capacity when
creating a RAID set.
•
If you are creating a RAID 0 (striping) array for perfomance, use two new
drives.
•
If you are creating a RAID 1 (mirroring) array for protection, you can use two
new drives or use an existing drive and a new drive (the new drive must be of
the same size or larger than the existing drive). If you use two drives of different
sizes, the smaller capacity hard disk will be the base storage size. For example,
one hard disk has an 80GB storage capacity and the other hard disk has 60GB
storage capacity, the maximum storage capacity for the RAID 1 set is 60GB.
Follow these steps to install the SATA hard disks for RAID configuration.
•
•
Before setting up your new RAID array, verify the status of your hard disks.
Make sure the Master/Slave jumpers are configured properly.
Both the data and power SATA cables are new cables. You cannot use
older 40-pin 80-conductor IDE or regular IDE power cables with Serial ATA
drives. Installing Serial ATA (SATA) hard disks require the use of new Serial
ATA cable (4-conductor) which supports the Serial ATA protocol and a
Serial ATA power cable.
•
Either end of the Serial ATA data cable can be connected to the SATA hard
disk or the SATA connector on the motherboard.
1. Install the Serial ATA hard disks into the drive bays.
2. Connect one end of the Serial ATA cable to the motherboard’s primary Serial
ATA connector (SATA1).
3. Connect the other end of Serial ATA cable to the master Serial ATA hard disk.
4. Connect one end of the second Serial ATA cable to the motherboard’s
secondary Serial ATA connector (SATA2).
5. Connect the other end of Serial ATA cable to the secondary Serial ATA hard
disk.
6. Connect the Serial ATA power cable to the power connector on each drive.
7. Proceed to section 5.4.2 “Entering VIA® Tech RAID BIOS Utility” for the next
procedure.
3-8
Chapter 3: Starting-Up
3.4.2 Entering VIA® Tech RAID BIOS Utility
1.
Boot-up your computer.
2.
During POST, press <Tab> to enter VIA RAID configuration utility.
The following menu options will appear.
The RAID BIOS information on the setup screen shown is for reference only.
What you see on your screen may not be exactly the same as shown.
VIA Tech. RAID BIOS Ver 0.96
Create a RAID array with
Create Array
the hard disk attached to
Delete Array
VIA IDE controller
Create/Delete Spare
Select Boot Array
F1ꢀ : View Array/Disk Status
Serial Number View
, ꢀ : Move to next item
Enter: Confirme the selection
ESCꢀ : Exit
Channelꢀꢀꢀ
Drive Nameꢀ
Array Nameꢀ
Modeꢀ Size(GB) Status
Channel0 Masterꢀ
Channel0 Slaveꢀꢀ
Channel1 Masterꢀ
Channel1 Slave ꢀ
XXXXXXXXXXꢀꢀꢀꢀ
XXXXXXXXXXꢀꢀꢀꢀ
No Drive
xxxxx xxx.xxꢀ
xxxxx xxx.xxꢀ
Hdd
Hdd
No Drive
On the upper-right side of the screen is the message and legend box. The keys on
the legend box allows you to navigate through the setup menu options. The
message describes the function of each menu item. The following lists the keys
found in the legend box with their corresponding functions.
F1
↑, ↓
Enter :
ESC :
:
:
View Array/Disk Status
Move to the next item
Confirm the selection
Exit
ASUS A7V600-X Motherboard
3-9
3.4.3 Create Array
1. In the VIA RAID BIOS utility main menu, select Create Array then press the
<Enter> key. The main menu items on the upper-left corner of the screen are
replaced with create array menu options.
VIA Tech. RAID BIOS Ver 0.96
Create a RAID array with
the hard disk attached to
VIA IDE controller
Auto Setup For Data Security
Array Mode RAID 1 (Mirroring)
Select Disk Drives
Start Create Process
F1ꢀ : View Array/Disk Status
, ꢀ : Move to next item
Enter: Confirm the selection
ESCꢀ : Exit
Channelꢀꢀꢀ
Drive Nameꢀ
Array Nameꢀ
Modeꢀ Size(GB) Status
Channel0 Masterꢀ
Channel0 Slaveꢀꢀ
Channel1 Masterꢀ
Channel1 Slave ꢀ
XXXXXXXXXXꢀꢀꢀꢀ
XXXXXXXXXXꢀꢀꢀꢀ
No Drive
xxxxx xxx.xxꢀ
xxxxx xxx.xxꢀ
Hdd
Hdd
No Drive
RAID 0 for performance
1. Select the second option item Array Mode, then press the <Enter> key. The
RAID system setting pop-up menu appears.
RAID 0 for performance
RAID 1 for data protection
RAID 0/1
RAID SPAN for capacity
2. Select RAID 0 for performance from the menu and press <Enter>.
From this point, you may choose to auto-configure the RAID array by selecting
Auto Setup for Performance or manually configure the RAID array for
stripped sets. If you want to manually configure the RAID array continue with
next step, otherwise, proceed to step #5.
3. Select Select Disk Drives, then press <Enter>. Use arrow keys to select disk
drive/s, then press <Enter> to mark selected drive. An asterisk is placed before
the selected drive.
4. Select Block Size, then press <Enter> to set array block size. A list of valid
array block sizes are displayed on a pop-up menu.
3-10
Chapter 3: Starting-Up
TIP: For server systems, it is recommended to use a
lower array block size. For multimedia computer
systems used mainly for audio and video editing, a
higher array block size is recommended for optimum
performance
4K
8K
16K
32K
64K
Use arrow keys to move selection bar on items and press <Enter> to select.
5. Select Start Create Process and press <Enter> to setup hard disk for RAID
system. The following confirmation message appears:
The same confirmation message appears when the Auto Setup for
Performance option is selected.
The data on the selected disks will
be destroyed. Continue? Press Y/N
Press “Y” to confirm or “N” to return to the configuration options.
RAID 1 for data protection
1. Select the second option item Array Mode, then press the <Enter> key. The
RAID system setting pop-up menu appears.
RAID 0 for performance
RAID 1 for data protection
RAID 0/1
RAID SPAN for capacity
2. Select RAID 1 for data protection from the menu and press <Enter>. Select
next task from pop-up menu. The task Create only creates the mirrored set
without creating a backup. Create and duplicate creates both mirrored set
and backup.
Create only
Create only
Create and duplicate
3. Select task and press <Enter>. The screen returns to Create Array menu
items. From this point, you may choose to auto-configure the RAID array by
selecting Auto Setup for Data Security or manually configure the RAID array
for mirrored sets. If you want to manually configure the RAID array continue
with next step, otherwise, proceed to step #5.
ASUS A7V600-X Motherboard
3-11
4. Select Select Disk Drives, then press <Enter>. Use arrow keys to select disk
drive/s, then press <Enter> to mark selected drive. (An asterisk is placed
before a selected drive.)
5. Select Start Create Process and press <Enter> to setup hard disk for RAID
system. The following confirmation message appears:
The same confirmation message appears when the Auto Setup for Data
Security option is selected.
The data on the selected disks will
be destroyed. Continue? Press Y/N
Press “Y” to confirm or “N” to return to the configuration options.
RAID SPAN for capacity
1. Select the second option item Array Mode, then press the <Enter> key. The
RAID system setting pop-up menu appears.
RAID 0 for performance
RAID 1 for data protection
RAID 0/1
RAID SPAN for capacity
2. Select RAID SPAN for capacity from the menu and press <Enter>. From this
point, you may choose to auto-configure the RAID array by selecting Auto
Setup for Capacity or manually configure the RAID array for spanned sets. If
you want to manually configure the RAID array continue with next step. Screen
reference on Auto Setup for Capacity can be found in step #4
3. Select Select Disk Drives, then press <Enter>. Use arrow keys to select disk
drive/s, then press <Enter> to mark selected drive.(An asterisk is placed before
a selected drive.)
3-12
Chapter 3: Starting-Up
4. Select Start Create Process and press <Enter> to setup hard disk for RAID
system. The following confirmation message appears:
The same confirmation message appears when the Auto Setup for Capacity
option is selected.
The data on the selected disks will
be destroyed. Continue? Press Y/N
Press “Y” to confirm or “N” to return to the configuration options.
3.4.4 Delete Array
1. In the VIA RAID BIOS utility main menu, select Delete Array then press the
<Enter> key. The focus is directed to the list of channel used for IDE RAID
arrays.
2. Press the <Enter> key to select a RAID array to delete. The following
confirmation message appears.
The selected array will be destroyed.
Are you sure? Continue? Press Y/N
Press “Y” to confirm or “N” to return to the configuration options.
3.4.5 Select Boot Array
1. In the VIA RAID BIOS utility main menu, select Select Boot Array then press
the <Enter> key. The focus is directed to the list of channel used for IDE RAID
arrays.
2. Press the <Enter> key to select a RAID array for boot. The Status of the
selected array will change to Boot. Press <ESC> key to go return to menu
items. Follow the same procedure to deselect the the boot array.
ESCꢀ : Exit
Channelꢀꢀꢀ
Drive Nameꢀꢀ
Array Nameꢀꢀ
Modeꢀ
Size(GB) Status
[ ]Channel0 Masterꢀ XXXXXXXXXXꢀꢀꢀꢀ
[ ]Channel0 Slaveꢀ XXXXXXXXXXꢀꢀꢀꢀ
Channel1 Masterꢀ No Drive
xxxxxxx xxx.xxꢀ
xxxxxxx xxx.xxꢀ
Hdd
Hdd
Channel1 Slave ꢀ No Drive
ASUS A7V600-X Motherboard
3-13
3.4.6 Serial Number View
1. In the VIA RAID BIOS utility main menu, select Serial Number View then
press the <Enter> key. The focus is directed to the list of channel used for IDE
RAID arrays. Move the selection bar on each item and the serial number is
displayed at the bottom of the screen. This option is useful for identifying same
model disks.
VIA Tech. RAID BIOS Ver 0.96
Create a RAID array with
Create Array
the hard disk attached to
Delete Array
VIA IDE controller
Create/Delete Spare
Select Boot Array
F1ꢀ : View Array/Disk Status
Serial Number View
, ꢀ : Move to next item
Enter: Confirme the selection
ESCꢀ : Exit
Channelꢀꢀꢀ
Drive Nameꢀ
Array Nameꢀ
Modeꢀ Size(GB) Status
Channel0 Masterꢀ
Channel0 Slaveꢀꢀ
Channel1 Masterꢀ
Channel1 Slave ꢀ
XXXXXXXXXXꢀꢀꢀꢀ
XXXXXXXXXXꢀꢀꢀꢀ
No Drive
xxxxx xxx.xxꢀ
xxxxx xxx.xxꢀ
Hdd
Hdd
No Drive
Serial Number:ꢀꢀꢀ
VJF41646
3-14
Chapter 3: Starting-Up
|