User’s manual
TL7601
DECT 6.0 remote dial pad
for use with AT&T models
TL7610/TL7611/
TL7650/TL7651
Parts checklist
Check to make sure the remote dial pad package includes the
following items:
User’s manual
TL7601
DECT 6.0 remote dial pad
for use with AT&T models
TL7610/TL7611/
TL7650/TL7651
Dial pad
User's manual
Charger for dial pad with
power adapter installed
Belt clip for dial pad
Battery for dial pad
Battery compartment cover
User’s manual
TL7601
DECT 6.0 remote dial pad
for use with AT&T models
TL7610/TL7611/
TL7650/TL7651
Table of contents
Getting started
Quick reference guide.................................................................................1
Installation preparation..............................................................................2
Charger installation......................................................................................3
Battery installation & charging...............................................................4
Remote dial pad registration and de-registration........................................6
Register the remote dial pad to the headset
base (with a single headset)........................................................6
Register the remote dial pad to the headset
base (with two headsets)..............................................................7
De-register the remote dial pad......................................................8
Belt clip.........................................................................................................................9
Remote dial pad operation
Remote dial pad settings........................................................................10
Language..................................................................................................10
Basic operation...........................................................................................................11
Make a call..............................................................................................................11
On-hook dialing (predialing)........................................................................11
Answer a call..........................................................................................12
Using the remote dial pad.........................................................12
Using the headset........................................................................12
Last number redial............................................................................12
Options while on calls..........................................................................14
Call waiting...........................................................................................14
Last number redial............................................................................14
Screen icons & display screen messages....................................15
Troubleshooting
Troubleshooting........................................................................................17
Maintenance and safety
Maintenance...............................................................................................25
Important safety information.............................................................26
Appendix
FCC Part 68 and ACTA..........................................................................30
FCC Part 15................................................................................................33
Limited warranty......................................................................................35
Technical specifications........................................................................39
Index
Index...............................................................................................................40
Getting started
Quick reference guide
DELETE
Loop
While reviewing the
redial memory, press to
delete an individual entry,
or press to clear the
redial history (page 13).
While predialing, press to
delete digits (page 11).
You can string a neck or
wrist cord (not provided)
through this loop.
LANG/SEL
up/ down
Press to review and change
language options (page 10).
Press again to save the
setting.
While reviewing redial
memory, press to select a
phone number (page 12).
When you are not using
the dial pad, press to
view the redial memory.
Then press or to
scroll through the redial
memory (page 12).
While in the LANG feature,
press to display the
language options.
CHARGE light
While entering digits,
press and hold PAUSE
to insert a dialing pause
(page 13).
On when the remote dial
pad is charging (page 5).
OFF/CLEAR
CALL/FLASH
During a call, press to
hang up.
While in menus, press to
cancel the operation and
exit the menu display.
While predialing, press to
delete digits (page 11).
Press to make or answer a
call. During a call, press to
receive call waiting
(page 14).
For complete instructions on using the headset, please refer to
the manual provided with your TL7610/TL7611/TL7650/TL7651
product. If you are unable to find your manual, visit
www.telephones.att.com to view or download the manual.
1
Getting started
Installation preparation
You must install and
charge the battery before
using the remote dial pad.
See pages 4-5
for easy instructions.
STOP!
Your product may be shipped with a protective sticker covering the
remote dial pad display - remove it before use.
For customer service or product information, visit our website at
In Canada, dial 1 (866) 288-4268.
Avoid placing the remote dial pad too close to:
• Communication devices such as: television sets, VCRs, or other
cordless telephones.
• Excessive heat sources.
• Noise sources such as a window with traffic outside, motors,
microwave ovens, refrigerators, or fluorescent lighting.
• Excessive dust sources such as a workshop or garage.
• Excessive moisture.
• Extremely low temperature.
• Mechanical vibration or shock such as on top of the washing
machine or work bench.
2
Getting started
Charger installation
1. Make sure the small
end of the power
2. Plug the power
adapter into a power
outlet not controlled
by a wall switch.
adapter is plugged into
the jack on the back of
the charger, and then
make sure that the
cord is routed behind
the tab as shown.
IMPORTANT INFORMATION
1. Use only the power adapter supplied with this product. To
order a replacement power adapter, visit our website at
In Canada dial 1 (866) 288-4268.
2. The power adapter is intended to be correctly oriented in a
vertical or floor mount position. The prongs are not designed
to hold the plug in place if it is plugged into a ceiling, under-
the-table or cabinet outlet.
3
Getting started
Battery installation & charging
Install the battery as shown below. After installing the battery,
place the remote dial pad in the charger. For optimal performance,
charge the remote dial pad battery for at least six hours before
use.
Step 2
Step 1
Step 3
Insert the battery
plug securely into
the jack located
inside the remote
dial pad battery
compartment,
Align the cover
flat against
the battery
compartment,
then slide it
upwards until it
clicks into place.
Place the
battery in the
compartment with
the label THIS
SIDE UP facing up
as indicated.
matching the
color-coded label.
4
Getting started
Battery installation & charging
Step 4
CHARGE light
Charge the remote dial
pad by placing it face
up in the charger. The
CHARGE light is on when
the dial pad battery is
charging.
NOTE:
1. When the battery is charging, you will see the cycling
fully charged, you will see
. When the battery is
.
2. If the display on the remote dial pad is blank, try unplugging the power adapter,
and firmly plugging it in again.
IMPORTANT INFORMATION
Use only the supplied rechargeable battery or replacement battery (AT&T
model BT190545). To obtain your replacement battery, visit our website
In Canada, dial 1 (866) 288-4268.
5
Getting started
Remote dial pad registration and de-registration
The TL7601 remote dial pad allows you to place phone calls with
an AT&T DECT 6.0 cordless headset system. You must register it to
the TL7610/TL7611/TL7650/TL7651 headset base before use. The
remote dial pad should be charged for a minimum of five minutes
before attempting registration to the headset base. You cannot
register the dial pad to the headset base before a headset is
registered to the headset base.
The remote dial pad does not work with an AT&T DECT 6.0 cordless
headset system that is connected to a telephone that is part of a
digital business system unless there is an analog adapter on the
line. Please contact your IT department, telephone administrator,
or your telephone service provider to determine if this remote dial
pad is compatible with your telephone system.
Register the remote dial pad to the
headset base (with a single headset)
1. The new remote dial pad should be
NOT REGISTERED
charged for at least five minutes before
registering to the headset base. When
the remote dial pad is removed from the
charger, it shows NOT REGISTERED on
the screen.
PRESS PAIR
2. Place the unregistered remote dial
pad into the charger. If PRESS PAIR
4 SEC ON BASE does not appear on
the remote dial pad screen after a few
seconds, remove the remote dial pad
and place it in the charger again.
4 SEC ON BASE
On
3. On the headset base, press and hold
the PAIR button for about four seconds
6
Getting started
Remote dial pad registration and de-registration
(until the red MUTE light on the headset
PLEASE WAIT...
base turns on) and then release the
button. The remote dial pad shows PLEASE
WAIT..., then DIAL PAD REGISTERED. It
takes about 30 seconds to complete the
registration.
DIAL PAD
REGISTERED
1
4. The MUTE light turns off and you see
the DIAL PAD screen (shown on the left)
indicating successful registration.
DIAL PAD
1
Register the remote dial pad to the headset
base (with two headsets)
• The dial pad can only be paired with one
headset, even if there are two headsets
in your system. The dial pad pairs with
the most recently registered headset. The
display indicates the paired dial pad by
2
DIAL PAD
1
DIAL PAD
showing either 1or
.
2
NOTES:
1. You cannot register a remote dial pad if a system headset is in use.
2. If the registration is not successful, the display shows NOT REGISTERED. Reset
the remote dial pad by lifting it out of the charger and then placing it back in the
charger. Now try the registration process again.
3. If you have one registered headset, the remote dial pad automatically connects to
the headset after registering on the headset base.
4. If you have two headsets, and you want the other headset to work with the
remote dial pad, you have to de-register all the headsets and the remote dial
pad first. Refer to the de-registration information on page 8. Then re-register the
headsets and dial pad.
5. Registration time depends on environmental conditions and varies.
7
Getting started
Remote dial pad registration and de-registration
De-register the remote dial pad
Please read carefully through all the
instructions on this page before beginning
the de-registration process.
This de-registration de-registers all the items
registered to the headset base, including all
headsets and the remote dial pad.
1. Press and hold the PAIR button on the headset
base until the MUTE light starts to flash, then
release the PAIR button.
Flashes
2. Immediately press and release the PAIR
button again. You must press the PAIR
button while the MUTE light is still flashing.
(If the light stops flashing before the dial
pad is de-registered, pick up the remote dial
pad and place it back into the charger, then
start again with step one above.)
ON/OFF
button
3. If the de-registration was successful, the
CONNECTING...
MUTE light on the headset base turns off.
The headset(s) ON/OFF light flashes twice
every five seconds. The dial pad displays
CONNECTING..., then NOT REGISTERED.
NOT REGISTERED
NOTE: De-registering the remote dial pad from the headset base also de-
registers all the headsets. To use the remote dial pad or the headset again,
refer to the registration information on pages 6-7.
8
Getting started
Belt clip
To attach the
belt clip:
To remove the
belt clip:
Gently lift either of
the belt clip retaining
tabs, shown in the
figure, to remove the
belt clip from the dial
pad.
Snap the belt clip
into the retaining
tabs on both sides
of the dial pad as
shown in the figure.
9
Remote dial pad operation
Remote dial pad settings
Language
You can select the language used for all
screen displays.
To select a language:
1. Press LANG/SEL when in idle mode.
LANGUAGE
2. Use
/
to scroll to ENGLISH, FRANCAIS
ENGLISH
1
or ESPANOL.
3. Press LANG/SEL again to save your
DIAL PAD
preference and return to the idle mode.
1
10
Remote dial pad operation
Basic operation
Make a call
To make a call:
Elapsed
time
• Press ON/OFF on the headset to turn on the
headset, then enter the telephone number on
the dial pad, and press CALL/FLASH on the
remote dial pad.
PHONE
0:00:30
1-234-5678
1
-OR-
• Press ON/OFF on the headset to turn on the
headset, then press CALL/FLASH on the
remote dial pad, and enter the telephone
number on the dial pad.
To end a call:
• Press
OFF/CLEAR on the remote dial pad.
ENDED
0:00:30
1-234-5678
-OR-
1
• Press ON/OFF on the headset.
NOTE: The screen displays the elapsed time of your
telephone conversation (in hours, minutes and seconds).
On-hook dialing (predialing)
1. Enter the telephone number. Press
OFF/CLEAR or DELETE to delete any
unwanted digits.
2. Press CALL/FLASH to dial the displayed
number.
UNABLE TO CALL
NOTES:
TRY AGAIN
1
1. If it cannot complete the call, the dial pad screen displays
UNABLE TO CALL TRY AGAIN.
ENTER TEL#
2. If you press CALL/FLASH before entering numbers, the dial
THEN PRESS CALL
pad screen displays ENTER TEL# THEN PRESS CALL.
1
11
Remote dial pad operation
Basic operation
Answer a call
Using the remote dial pad:
INCOMING
CALL
• Press
CALL/FLASH
1
-OR-
• Press any key (0-9, * or #) on the remote dial
pad.
To end a call:
• Press
OFF/CLEAR.
Using the headset:
• Press ON/OFF on the headset.
To end a call:
• Press ON/OFF on the headset.
DIAL PAD
NOTE: When another headset or telephone is using the
telephone line, LINE IN USE appears on the screen. Press
CALL/Flash during a call to see the elapsed call time.
LINE IN USE
1
Last number redial
To view the five most recently dialed numbers:
• Press one of the
number display mode.
• Press repeatedly to view the last five
/
to enter the redial
/
recently called numbers (up to 30 digits).
Press LANG/SEL to select a phone number, or press
OFF/CLEAR to exit.
To redial a number:
PHONE
0:00:30
• Press CALL/FLASH to dial the displayed
1-234-5678
1
number.
12
Remote dial pad operation
Basic operation
Last number redial (continued)
To remove a number:
• While the desired number is displayed, press
DELETE to delete the displayed number from
the redial memory.
To edit a number:
• While the desired number is displayed, press
LANG/SEL to enter the editing mode, then press
OFF/CLEAR or DELETE to make corrections.
• While entering digits, press PAUSE to insert a
dialing pause.
1-234-567p
1
13
Remote dial pad operation
Options while on calls
Call waiting
If you subscribe to call waiting service with
your local telephone service provider, you
will hear a beep in the headset if there is an
incoming call while you are already on a call.
Press CALL/FLASH on the remote dial pad
or press and hold the MUTE/FLASH key on
the headset to put your current call on hold
and take the new call. Press CALL/FLASH
on the remote dial pad or press and hold the
MUTE/FLASH key on the headset at any time
to switch back and forth between calls.
PHONE
0:00:30
1-234-5678
1
MUTE/FLASH button
To end call waiting call, press ON/OFF on the
headset.
NOTES:
1
.
Pressing
When you connect the headset with a corded
phone using LIFTER MODE, press the flash but-
ton on the corded phone to switch back and
forth between calls.
CALL/FLASH to
access services
from your local
telephone service
provider will not
affect the elapsed
time, which will
continue to record
the total talk time.
Last number redial
2. You cannot press
• While on a call, pressing
or on the
OFF/CLEAR to exit
call waiting without
ending the call.
remote dial pad only displays the number
last dialed.
• The displayed number is dialed if you
press CALL/FLASH.
Press OFF/CLEAR on the dial pad or press
ON/OFF on the headset to exit the call.
14
Remote dial pad operation
Screen icons & display screen messages
Screen icons
PHONE
0:00:30
1
1-234-5678
The remote dial pad works with headset 1.
The remote dial pad works with headset 2.
The telephone line is in use.
1
2
Battery charging (animated display).
Display screen messages
The remote dial pad with a low
battery has been placed in the
remote dial pad charger.
CHARGING
The remote dial pad is
CONNECTING ...
registering to the headset base,
or has lost communication with
the headset base.
The remote dial pad is in idle
mode.
DIAL PAD
The dial pad has been
successfully registered to the
headset base.
DIAL PAD
REGISTERED
You have just ended a call.
ENDED
15
Remote dial pad operation
Screen icons & display screen messages
Display screen messages
Enter the telephone number,
then press
ENTER TEL#
CALL/FLASH.
THEN PRESS CALL
There is a call coming in.
INCOMING
CALL
You can select a language
for the dial pad display.
LANGUAGE
An extension phone or one
of the headsets is in use.
LINE IN USE
The remote dial pad has not
yet been registered to the
headset base.
NOT REGISTERED
The remote dial pad is in use.
PHONE
The battery is very low.
The dial pad should be
placed in the remote dial
pad charger for recharging.
PLACE IN CHARGER
Press the PAIR button on
the headset base for four
seconds to register the dial
pad.
PRESS PAIR
4 SEC ON BASE
The dial pad is in the redial
memory.
REDIAL
An attempt to make a call
has failed.
UNABLE TO CALL
TRY AGAIN
16
Troubleshooting
Troubleshooting
If you have difficulty with your remote dial pad, please try the
suggestions below. For Customer Service, visit our website at
In Canada, dial 1 (866) 288-4268.
My remote dial
pad doesn’t
work at all.
• Make sure the battery is correctly installed
with the plug securely connected.
• Make sure the power cord is securely
plugged into the remote dial pad charger,
and the charger adapter is plugged into
a working electrical power outlet not
controlled by a wall switch.
• Make sure the remote dial pad is registered
to a headset base (AT&T models TL7610/
TL7611/TL7650/TL7651 only).
• The remote dial pad does not work with
any AT&T DECT 6.0 cordless headset system
that is connected to a telephone that is part
of a digital business system unless there
is an analog terminal adapter (ATA) on the
line. Please contact your IT department,
telephone administrator, or your telephone
service provider to determine if this remote
dial pad is compatible with your telephone
system.
• Make sure the telephone line cord and other
necessary cables are firmly connected to the
headset base.
• Make sure the remote dial pad is fully
charged. For optimal daily performance,
return the remote dial pad to its charger
when not in use.
17
Troubleshooting
Troubleshooting
• Reset the headset base. Unplug the
electrical power of the headset base. Wait
for approximately 15 seconds, then plug it
back in. Follow the directions for remote
dial pad registration.
• You may need a new dial pad battery.
Please refer to Battery installation &
charging, pages 4-5, in this user’s manual.
I cannot dial out.
• First try all the suggestions on the
previous page.
• Make sure you have a dial tone in the
headset before dialing. The remote dial
pad may take a second or two to find the
headset base and produce a dial tone. This
is normal. Wait an extra second before
dialing.
• Check the LIFTER MODE selected on the
headset base. Please refer to the manual
provided with your headset base.
• If you have installed a handset lifter, make
sure the installation of the lifter is correct.
Please refer to the manual provided with
you remote handset lifter.
• Eliminate any background noise. Noise
from a television, radio or other appliances
may cause the remote dial pad to not dial
out properly. If you cannot eliminate the
background noise, try dialing from another
room or office with less background noise.
18
Troubleshooting
Troubleshooting
• If the other phones in your home or office
are having the same problem, the problem
is in your wiring or local service. Contact
your local telephone company (charges
may apply).
My remote
dial pad isn’t
performing
normally.
• Make sure the power cord is securely
plugged into the remote dial pad charger,
and the remote dial pad is in the charger.
Plug the charger power adapter into a
different working electrical outlet not
controlled by a wall switch.
• Move the remote dial pad closer to the
headset base. You might have moved out
of range.
• Reset the headset base. Unplug the unit’s
electrical power. Wait for 15 seconds then
plug it back in. Follow the procedures on
pages 6-7 to register the remote dial pad
again.
• Other electronic products can cause
interference to your cordless phone. Try
installing your phone as far away from
these types of electronic devices as
possible: television sets, VCRs, or other
cordless telephones.
• Ensure that the headset base is powered
up.
CONNECTING...
displays on my
remote dial pad.
• Move the remote dial pad closer to the
headset base. You might have moved out
of range.
19
Troubleshooting
Troubleshooting
• Follow the directions for dial pad
registration on pages 6-7. Wait for several
seconds until the screen message changes
to DIAL PAD, confirming that registration
was successful.
• Disconnect and re-install the remote dial
pad battery, then perform the dial pad
registration procedure again.
• Reset the headset base. Unplug the unit’s
electrical power. Wait for 15 seconds and
plug it back in. The remote dial pad needs
to be registered again.
• Other electronic products can cause
interference to your cordless phone. Try
installing your phone as far away from
these types of electronic devices as
possible: television sets, VCRs, or other
cordless telephones.
The battery
does not hold
a charge.
• If the remote dial pad is in its charger and
the CHARGE light does not come on, refer
to The CHARGE light is off on page 22 in
this Troubleshooting section.
• Ensure that the battery is correctly installed
with the plug securely connected.
• Charge the battery in the remote dial pad
for at least six hours. For optimum daily
performance, return the remote dial pad to
its charger when not in use.
• You may need a new battery. Please refer to
20
Troubleshooting
Troubleshooting
the Battery installation & charging section
(pages 4-5) of this user’s manual.
• Your remote dial pad might be
malfunctioning. Please refer to the Limited
warranty section (pages 35-38) of this
user’s manual for further instruction.
My remote dial
pad does not
react when I
receive a call.
• Make sure that the remote dial pad is
registered to the headset base.
• The remote dial pad may be too far from
the headset base. Move it closer to the
headset base within the operating range.
• The layout of your home or office might be
limiting the operating range. Try moving the
headset base to another location, preferably
on an upper floor.
• Charge the battery in the remote dial pad
for at least six hours. For optimum daily
performance, return the remote dial pad to
its charger when not in use.
• Other electronic products can cause
interference to your cordless phone. Try
installing your phone as far away from
these types of electronic devices as
possible: television sets, VCRs, or other
cordless telephones.
• Disconnect, and then re-install the battery.
Place the remote dial pad in the charger. Wait
for the remote dial pad to re-establish its
connection with the headset base. Allow up to
one minute for this to take place.
21
Troubleshooting
Troubleshooting
The CHARGE
light is off.
• Make sure the power adapter is plugged
in correctly and securely to a working
electrical power outlet not controlled by a
wall switch.
• Ensure that the battery is correctly installed
with the plug securely connected.
• Clean the remote dial pad charging contacts
each month using a pencil eraser or cloth.
• Your phone might be malfunctioning. Please
refer to the Limited warranty section
(pages 35-38) of this user’s manual for
further instruction.
• Call waiting is a subscription service. You
must subscribe to this service from your
local telephone company for this feature to
work on your telephone.
My call waiting
isn’t working.
• Your caller must be calling from an area
that supports call waiting service.
• Both you and your caller’s telephone
companies must use compatible equipment.
I cannot switch
to the call
waiting call.
• Press and hold MUTE/FLASH at any time to
switch back and forth between calls (see
page 14).
• If the headset is connected to a corded
phone using LIFTER MODE, the flash
function on the headset does not work. To
switch to the call waiting call, press the
flash button on the corded phone.
22
Troubleshooting
Troubleshooting
I cannot register
my dial pad to
my cordless
phone.
• The TL7601 dial pad can only be
registered to the TL7610/7611 headset
base.
• The 7601 dial pad can only be registered
to the TL7610/7611 headset base.
I cannot register
my dial pad
to the TL7600
accessory
headset
charger.
I cannot register
my dial pad to
the TL7610/7611
headset base.
The dial pad can only be registered to the
TL7610/7611 headset base if there is a
headset registered to the base first.
If you have registered the headset to a
AT&T DECT 6.0 cordless telephone, do the
following:
• De-register the headset from the
telephone base (see instructions in the
telephone user’s manual).
• Register the headset to the headset base
(see page 33 of the TL7610/7611 user’s
manual).
• Register the dial pad to the headset base
(see page 6).
Common cure
for electronic
equipment.
If the unit does not seem to be responding
normally, try putting the remote dial pad in
its charger. If it does not seem to respond, do
the following (in the order listed):
23
Troubleshooting
Troubleshooting
• Disconnect the power to the headset base.
• Disconnect the remote dial pad battery.
• Wait a few minutes.
• Connect power to the headset base.
• Re-install the battery, and place the
remote dial pad into the dial pad charger.
• Wait for the remote dial pad to re-
establish its connection with the headset
base. Allow up to one minute for this to
take place.
24
Maintenance and safety
Maintenance
Taking care of your remote dial pad
• Your remote dial pad contains sophisticated electronic parts, so
it must be treated with care.
• Avoid rough treatment.
• Put the remote dial pad down gently. Save the original packing
materials to protect your remote dial pad if you ever need to
return it.
Avoid water
• Your remote dial pad can be damaged if it gets wet. Do not
use the dial pad outdoors in the rain, or handle it with wet
hands. Do not install the remote dial pad near a sink, bathtub
or shower.
Electrical storms
• Electrical storms can sometimes cause power surges harmful to
electronic equipment. For your own safety, take caution when
using electric appliances during storms.
Cleaning your remote dial pad
• Your remote dial pad has a durable plastic casing that should
retain its luster for many years. Clean it only with a soft cloth
slightly dampened with water or a mild soap.
• Do not use excess water or cleaning solvents of any kind.
Remember that electrical appliances can cause serious injury if used when you
are wet or standing in water. If the remote dial pad charger should fall into water,
DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD FROM THE WALL.
Then pull the unit out by the unplugged cord.
25
Maintenance and safety
Important safety information
This symbol is to alert you to important operating or
servicing instructions that may appear in this user’s manual.
Always follow basic safety precautions when using this product to
reduce the risk of injury, fire, or electric shock.
Safety information
• Read and understand all instructions in the user’s manual.
Observe all markings on the product.
• Avoid using a remote dial pad during a thunderstorm. There
may be a slight chance of electric shock from lightning.
• Do not use a remote dial pad in the vicinity of a gas leak. If
you suspect a gas leak, report it immediately, but use a remote
dial pad away from the area where the gas is leaking, and
make sure the remote dial pad charger is also away from the
area.
• Do not use this product near water, or when you are wet.
For example, do not use it in a wet basement or shower, or
next to a swimming pool, bathtub, kitchen sink, or laundry tub.
Do not use liquids or aerosol sprays for cleaning. If the product
comes in contact with any liquids, unplug any line or power
cord immediately. Do not plug the product back in until it has
dried thoroughly.
• Install this product in a protected location where no one can
trip over any line or power cords. Protect cords from damage
or abrasion.
• If this product does not operate normally, see the
Troubleshooting section on pages 17-24 of this user’s
manual. If you cannot solve the problem, or if the product is
damaged, refer to the Limited warranty on pages 35-38. Do
not open this product except as may be directed in your user’s
manual. Opening the product or reassembling it incorrectly
may expose you to hazardous voltage or other risks.
26
Maintenance and safety
Important safety information
• Replace batteries only as described in your user’s manual.
Do not burn or puncture batteries — they contain caustic
chemicals.
• This power adapter is intended to be correctly oriented in a
vertical or floor mount position. The prongs are not designed
to hold the plug in place if it is plugged into a ceiling or an
under-the-table/cabinet outlet.
Caution: Use only the power adapter provided with this product. To
owbwtaiwn .aterelpelapchemoennet,sv.iasittto.ucrowmebosirtecaaltl 1 (800) 222-3111.
In Canada, dial 1 (866) 288-4268.
Especially about cordless telephones:
• Privacy: The same features that make a cordless telephone
convenient create some limitations. Telephone calls are trans-
mitted between the telephone base and the handset by radio
waves, so there is a possibility that your cordless telephone
conversations could be intercepted by radio receiving equip-
ment within range of the cordless handset. For this reason,
you should not think of cordless telephone conversations
as being as private as those on corded telephones.
• Electrical power: The telephone base of this cordless tel-
ephone must be connected to a working electrical outlet that
is not controlled by a wall switch. Calls cannot be made from
the handset if the telephone base is unplugged or switched
off, or if the electrical power is interrupted.
• Potential TV interference: Some cordless telephones operate
at frequencies that may cause interference to TVs and VCRs.
To minimize or prevent such interference, do not place the
telephone base of the cordless telephone near or on top of a
TV or VCR. If interference is experienced, moving the cordless
telephone farther away from the TV or VCR will often reduce
or eliminate the interference.
27
Maintenance and safety
Important safety information
or eliminate the interference.
•
Rechargeable batteries: This product contains nickel-
cadmium, nickel-metal hydride or lithium-ion rechargeable
batteries. Exercise care in handling batteries in order to not
create a short circuit with conductive material such as rings,
bracelets, and keys. The battery or conductor may overheat
and cause harm. Observe proper polarity between the battery
and the battery charger.
•
Lithium-ion rechargeable batteries: Dispose of these
batteries in a safe manner. Do not burn or puncture. Like
other batteries of this type, if burned or punctured, they
could release caustic material that could cause injury.
The RBRC™ Seal means that the manufacturer is voluntarily
participating in an industry program to collect and recycle lithium-
ion rechargeable batteries when taken out of service within the
United States. These batteries may be taken to a participating local
retailer of replacement batteries or recycling center. Or you may call
1-800-8-BATTERY for locations accepting spent Li-ion batteries.
CAUTION
• Use only the batteries provided or their equivalent.
• Change this product’s batteries only in accordance with the
instructions and limitations specified in this manual.
• As with any batteries, do not allow conductive materials such
as rings, bracelets, or keys to come in contact with the metalic
parts of the battery. The battery or conductor may overheat
and cause harm.
• Do not open or damage the batteries. Released electrolyte
is corrosive and may cause injury to the eyes or skin. The
electrolyte may be toxic if swallowed.
• Do not dispose of the batteries in a fire. Check with local
waste management codes for special disposal instructions.
28
Maintenance and safety
Important safety information
• To prevent fire or shock hazard, do not expose this product to
water or any type of moisture.
• Observe proper polarity orientation between the battery and
the metallic contacts.
• Do not disassemble your telephone. There are no user-
serviceable parts inside. Refer to qualified service personnel
for servicing.
Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless telephones):
Wireless Technology Research, LLC (WTR), an independent
research entity, led a multidisciplinary evaluation of the
interference between portable cordless telephones and implanted
cardiac pacemakers. Supported by the U.S. Food and Drug
Administration, WTR recommends to physicians that:
PACEMAKER PATIENTS
• Should keep cordless telephone at least six inches from the
pacemaker.
• Should NOT place cordless telephones directly over the
pacemaker, such as in a breast pocket, when it is turned ON.
• Should use the cordless telephone at the ear opposite the
pacemaker.
WTR’s evaluation did not identify any risk to bystanders with
pacemakers from other persons using cordless telephones.
SAVE THESE INSTRUCTIONS
29
Appendix
FCC Part 68 and ACTA
This equipment complies with Part 68 of the FCC rules and with
technical requirements adopted by the Administrative Council for
Terminal Attachments (ACTA). The label on the back or bottom of this
equipment contains, among other things, a product identifier in the
format US:AAAEQ##TXXXX. This identifier must be provided to your
local telephone company upon request.
The plug and jack used to connect this equipment to premises wiring
and the telephone network must comply with applicable Part 68 rules
and technical requirements adopted by ACTA. A compliant telephone
cord and modular plug is provided with this product. It is designed to
be connected to a compatible modular jack that is also compliant. An
RJ11 jack should normally be used for connecting to a single line and
an RJ14 jack for two lines. See Installation Instructions in the user’s
manual.
The Ringer Equivalence Number (REN) is used to determine how many
devices you may connect to your telephone line and still have them
ring when you are called. The REN for this product is encoded as the
6th and 7th characters following the US: in the product identifier (e.g., if
## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs
should be five (5.0) or less. For more information, please contact your
local telephone company.
This equipment may not be used with Party Lines. If you have specially
wired alarm dialing equipment connected to your telephone line,
ensure the connection of this equipment does not disable your alarm
equipment. If you have questions about what will disable alarm
equipment, consult your telephone company or a qualified installer.
If this equipment is malfunctioning, it must be unplugged from the
modular jack until the problem has been corrected. Repairs to this
telephone equipment can only be made by the manufacturer or
its authorized agents. For repair procedures, follow the instructions
outlined under the Limited Warranty.
30
Appendix
FCC Part 68 and ACTA
If this equipment is causing harm to the telephone network, the
telephone company may temporarily discontinue your telephone
service. The telephone company is required to notify you before
interrupting service. If advance notice is not practical, you will be
notified as soon as possible. You will be given the opportunity to
correct the problem and the telephone company is required to inform
you of your right to file a complaint with the FCC. Your telephone
company may make changes in its facilities, equipment, operation, or
procedures that could affect the proper functioning of this product.
The telephone company is required to notify you if such changes are
planned.
If this product is equipped with a corded or cordless handset, it is
hearing aid compatible.
If this product has memory dialing locations, you may choose to store
emergency telephone numbers (e.g., police, fire, medical) in these
locations. If you do store or test emergency numbers, please:
Remain on the line and briefly explain the reason for the call before
hanging up.
Perform such activities in off-peak hours, such as early morning or late
evening.
31
Appendix
FCC Part 68 and ACTA
Industry Canada
Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept
any interference, including interference that may cause undesired
operation.
The term ‘’IC:‘’ before the certification/registration number only signifies
that the Industry Canada technical specifications were met.
The Ringer Equivalence Number (REN) for this terminal equipment
is 0.1. The REN is an indication of the maximum number of devices
allowed to be connected to a telephone interface. The termination on
an interface may consist of any combination of devices subject only to
the requirement that the sum of the RENs of all the devices does not
exceed five.
This product meets the applicable Industry Canada technical
specifications.
32
Appendix
FCC Part 15
This equipment has been tested and found to comply with the
requirements for a Class B digital device under Part 15 of the
Federal Communications Commission (FCC) rules.
These requirements are intended to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Changes or modifications to this equipment not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation. Privacy of communications may not be
ensured when using this device.
33
Appendix
FCC Part 15
To ensure safety of users, the FCC has established criteria for the
amount of radio frequency energy that can be safely absorbed
by a user or bystander according to the intended usage of the
product. This product has been tested and found to comply with
the FCC criteria. The headset may be safely held against the ear
of the user. The headset base shall be installed and used such
that parts of the user’s body other than the hands are maintained
at a distance of approximately 20 cm (8 inches) or more. If you
choose to use a clipping device, please make sure to only use the
supplied AT&T belt clip.
This Class B digital apparatus complies with Canadian ICES-003.
34
Appendix
Limited warranty
The AT&T brand is used under license - any repair, replacement or
warranty service, and all questions about this product should be
directed to: In the United States of America, visit
In Canada, call 1 (866) 288-4268.
1. What does this limited warranty cover?
The manufacturer of this AT&T-branded product warrants to
the holder of a valid proof of purchase (“CONSUMER” or “you”)
that the product and all accessories provided in the sales package
(“PRODUCT”) are free from defects in material and workmanship,
pursuant to the following terms and conditions, when installed and
used normally and in accordance with the PRODUCT operating
instructions. This limited warranty extends only to the CONSUMER for
products purchased and used in the United States of America and
Canada.
2. What will be done if the PRODUCT is not free from defects in
materials and workmanship during the limited warranty period
(“materially defective PRODUCT”)?
During the limited warranty period, the manufacturer’s authorized
service representative will repair or replace at the manufacturer’s
option, without charge, a materially defective PRODUCT. If the
manufacturer repairs the PRODUCT, they may use new or refurbished
replacement parts. If the manufacturer chooses to replace the
PRODUCT, they may replace it with a new or refurbished PRODUCT
of the same or similar design. The manufacturer will retain defective
parts, modules, or equipment. Repair or replacement of the
PRODUCT, at the manufacturer’s option, is your exclusive remedy. The
manufacturer will return repaired or replacement products to you in
working condition. You should expect the repair or replacement to
take approximately 30 days.
35
Appendix
Limited warranty
3. How long is the limited warranty period?
The limited warranty period for the PRODUCT extends for ONE
(1) YEAR from the date of purchase. If the manufacturer repairs or
replaces a materially defective PRODUCT under the terms of this
limited warranty, this limited warranty also applies to repaired or
replacement PRODUCT for a period of either (a) 90 days from the
date the repaired or replacement PRODUCT is shipped to you or
(b) the time remaining on the original one-year limited warranty;
whichever is longer.
4. What is not covered by this limited warranty?
This limited warranty does not cover:
• PRODUCT that has been subjected to misuse, accident, shipping
or other physical damage, improper installation, abnormal
operation or handling, neglect, inundation, fire, water, or other
liquid intrusion; or
• PRODUCT that has been damaged due to repair, alteration,
or modification by anyone other than an authorized service
representative of the manufacturer; or
• PRODUCT to the extent that the problem experienced is caused
by signal conditions, network reliability or cable or antenna
systems; or
• PRODUCT to the extent that the problem is caused by use with
non-AT&T accessories; or
• PRODUCT whose warranty/quality stickers, PRODUCT serial
number plates or electronic serial numbers have been removed,
altered or rendered illegible; or
• PRODUCT purchased, used, serviced, or shipped for repair from
outside the United States of America or Canada, or used for
commercial or institutional purposes (including but not limited to
products used for rental purposes); or
36
Appendix
Limited warranty
• PRODUCT returned without valid proof of purchase (see item 6
below); -or-
• Charges for installation or setup, adjustment of customer controls,
and installation or repair of systems outside the unit.
5. How do you get warranty service?
To obtain warranty service in the United States of America, visit
Canada, call 1 (866) 288-4268. NOTE: Before calling for service,
please review the user’s manual; a check of the PRODUCT controls
and features may save you a service call.
Except as provided by applicable law, you assume the risk of loss
or damage during transit and transportation and are responsible
for delivery or handling charges incurred in the transport of the
PRODUCT(s) to the service location. The manufacturer will return
repaired or replaced PRODUCT under this limited warranty to
you. Transportation, delivery or handling charges are prepaid. The
manufacturer assumes no risk for damage or loss of the PRODUCT in
transit. If the PRODUCT failure is not covered by this limited warranty,
or proof of purchase does not meet the terms of this limited
warranty, the manufacturer will notify you and will request that you
authorize the cost of repair prior to any further repair activity. You
must pay for the cost of repair and return shipping costs for the
repair of products that are not covered by this limited warranty.
6. What must you return with the PRODUCT to get warranty
service? You must:
a. Return the entire original package and contents including the
PRODUCT to the service location along with a description of
the malfunction or difficulty; and
b. Include “valid proof of purchase” (sales receipt) identifying
the PRODUCT purchased (PRODUCT model) and the date of
purchase or receipt; and
c. Provide your name, complete and correct mailing address, and
telephone number.
37
Appendix
Limited warranty
7. Other limitations
This warranty is the complete and exclusive agreement
between you and the manufacturer of this AT&T branded
PRODUCT. It supersedes all other written or oral communications
related to this PRODUCT. The manufacturer provides no other
warranties for this PRODUCT. The warranty exclusively describes
all of the manufacturer’s responsibilities regarding the PRODUCT.
There are no other express warranties. No one is authorized to
make modifications to this limited warranty and you should not
rely on any such modification.
State/Provincial Law rights: This warranty gives you specific
legal rights, and you may also have other rights that vary from
state to state or province to province.
Limitations: Implied warranties, including those of fitness
for a particular purpose and merchantability (an unwritten
warranty that the PRODUCT is fit for ordinary use) are limited
to one year from date of purchase. Some states/provinces do
not allow limitations on how long an implied warranty lasts,
so the above limitation may not apply to you. In no event shall
the manufacturer be liable for any indirect, special, incidental,
consequential, or similar damages (including, but not limited to
lost profits or revenue, inability to use the PRODUCT or other
associated equipment, the cost of substitute equipment, and
claims by third parties) resulting from the use of this PRODUCT.
Some states/provinces do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
Please retain your original sales receipt as proof of
purchase.
38
Appendix
Technical specifications
RF frequency band
1921.536 MHz — 1928.448 MHz
5
Channels
Operating temperature
32°F — 122°F
0°C — 50°C
Dial pad charger voltage
(AC voltage, 60Hz)
96 — 127 Vrms
3.2 — 4.2 VDC
6VDC @200mA
Dial pad voltage
Dial pad charger voltage
(AC adapter output)
3.7V 170mAH
Replacement battery
Dial pad operating range
This dial pad operates within the maximum power allowed by
the Federal Communications Commission (FCC). Even so, this
dial pad and headset base can communicate over only a certain
distance — which can vary with the locations of the headset
base and dial pad, the weather, and the construction of your
home or office.
39
Index
Index
A
L
AC adapter, 3, 39
Answer calls, 12
Language, 1, 10, 16
Last number redial, 12-14
Limited warranty, 35-38
B
M
Basic operation, 11-13
Battery charging, 5, 15
Battery installation, 4, 5
Belt clip, 9
Maintenance, 25
Making calls, 11
Mute, 7, 8, 14
C
O
Call waiting, 14, 22
On-hook dialing, 11
CHARGE light, 1, 5, 22
P
D
Predialing, 11
Delete digits, 1, 11, 13
Delete redial memory, 13
De-registration, 8
Q
Quick reference guide, 1
Dial pad operating range, 39
Display screen messages, 15
R
Rechargeable battery, 5, 28
Redial, 12-14
E
Remote dial pad
de-registration, 8
registration, 6-7
settings, 10
Elapsed time, 11, 14
Ending calls, 11, 12
F
Flash, 14
S
H
Screen icons, 15
Headset, 6-8, 11, 12, 14-23
T
I
Technical specifications, 39
Troubleshooting, 17-24
Important safety instruc-
tions, 26-29
40
© 2008 Advanced American Telephones. All rights reserved.
AT&T and the AT&T logo are trademarks of AT&T Intellectual Property II, L.P. d/b/a
AT&T Intellectual Property licensed to Advanced American Telephones.
Printed in China. Issue 2 AT&T 10/08.
|