AT T 1145 User Manual

User Manual (Part 2)  
2.4 GHz Cordless  
Telephone 1445/1145  
with Caller ID & CallWaiting  
Getting Started  
Getting Started  
Quick reference guide  
Quick reference guide  
Telephone Base  
Incoming calls (see page 20)  
Handset  
NEW 00  
OLD 27  
ANTENNA  
Swivel fully upright for  
best results.  
AM  
8/12 10:06  
Low battery  
(see page 7)  
Date and time  
(see page 10)  
Select  
Hold  
Press to store a programming option  
(see page 10), or to store a directory  
entry in memory (see page 17).  
Press to place a call on hold. Press  
again to resume your call.  
PAGE/  
HANDSET  
LOCATOR  
Press to locate handset  
if lost (see page 14).  
^V Volume/Function  
Phone/Flash  
During a call, press  
listening volume.  
^V  
to adjust  
Press to begin a call, then dial a number.  
During a call, press to receive an incoming  
call, if Call Waiting is activated (see page 13).  
While programming, press to change  
menu item or value (see page 10).  
Press DIR when phone is not in use to  
display phone book entries (see page 18).  
While entering or modifying names, press  
to advance cursor.  
Off  
Press CID when phone is not in use to  
display Caller ID information (see page  
21). While entering numbers or letters,  
press to delete last character entered.  
During a call, press to hang up.  
During programming, press to stop  
without making changes.  
IN USE/CHARGING  
Steady: Handset battery is charging.  
Flashing: Phone is in use, or call is  
on hold.  
MESSAGE  
Chan/Delete  
Prog  
Redial/Pause  
Flashes when you have new voice  
mail (requires voice mail service  
from your local telephone company).  
If call is noisy or unclear, press  
to switch to a clearer channel.  
Press to customize the telephone’s  
operation (see page 10).  
Press to redial last number  
called.  
NEW CALL  
Press and hold to delete all  
Caller ID entries.  
While dialing or entering num-  
bers into your phone directory,  
press to insert a 4-second  
If you have Caller ID service: On  
when new calls have been received;  
off when all new Caller ID records  
have been reviewed (see page 20).  
dialing pause (see page 17).  
Using the dial pad to enter letters (see page 17)  
Press once to enter “A”  
Press twice to enter “B”  
Press 3 times to enter “C”  
Press 4 times to enter “2”  
2
2
3
Getting Started  
Getting Started  
Parts checklist  
Before you begin  
Remember to save your sales receipt and original packaging in case you ever need to  
ship your telephone for warranty service. Check to make sure the telephone package  
includes the following:  
About Caller Identification  
Telephone operating range  
Caller ID with Call Waiting features in  
this telephone let you see who’s calling  
before you answer the phone, even  
when you’re on another call. These  
features require services provided by  
your local telephone company.  
This cordless telephone operates with  
the maximum power allowed by the  
Federal Communications Commission  
(FCC). Even so, this handset and base  
can communicate over only a certain  
distance — which can vary with the  
locations of the base and handset, the  
weather, and the construction of your  
home or office. For best performance,  
keep the base antenna fully upright.  
Contact your telephone service  
provider if:  
• You have both Caller ID and Call  
Waiting, but as separate services  
(you may need combined service)  
If you receive a call while you are  
out of range, the handset might not  
ring — or if it does ring, the call might  
not connect when you press PHONE.  
Move closer to the base, then press  
PHONE to answer the call.  
• You have only Caller ID service, or  
only Call Waiting service  
Telephone base  
Telephone handset  
• You don’t subscribe to any Caller  
ID or Call Waiting services.  
If you move out of range during a  
phone conversation, you might hear  
noise or interference. To improve  
reception, move closer to the base.  
You can use this phone with regular  
Caller ID service, and you can use its  
other features without subscribing to  
either Caller ID or combined Caller ID  
with Call Waiting service. There may  
be fees for these services, and they  
may not be available in all areas.  
Power  
adapter  
If you move out of range without  
pressing OFF, your phone will be left  
“off the hook.” To hang up properly,  
walk back toward the telephone base,  
periodically pressing OFF until the call  
is disconnected.  
Battery pack  
Belt clip  
Caller ID features will work only if  
both you and the caller are in areas  
offering Caller ID service, and if both  
telephone companies use compatible  
equipment.  
Long line cord  
Short line cord  
See Caller ID Operation, beginning on  
page 20, for more details about how  
these features work.  
4
5
Getting Started  
Getting Started  
Telephone base installation  
Battery installation & charging  
Install the telephone base as shown below. Choose a location away from electronic  
equipment, such as personal computers, television sets or microwave ovens. Avoid  
excessive heat, cold, dust or moisture.  
After installation, place the handset in the base and allow the battery to charge for 12  
hours before use. You can keep the battery charged by returning the handset to the base  
after each use. When battery power is fully depleted, a full recharge takes about 8 hours.  
NEW 00  
OLD 27  
AM  
8/12 10:06  
NOTE: Use only the power  
cord supplied with this product.  
If you need a replacement, call  
1 800 222–3111.  
Low battery indicator  
Return handset to base to recharge  
when this symbol appears. (Handset  
will beep when battery is low.)  
Be sure to use an electrical outlet  
not controlled by a wall switch.  
Plug in battery here  
Press coin into slot on  
base of handset to  
release latch, then  
remove cover  
Plug power cord  
transformer into  
electrical outlet  
Plug long line cord  
into telephone jack  
Place handset in base to charge for 12 hours  
before first use.  
Charging light will be illuminated  
while battery is charging.  
Rotate antenna  
to fully upright  
position  
To replace cover:  
1
2
Insert tabs at top of  
cover into slots on base  
Align tab at bottom of  
cover with slot in base,  
then press to click in  
place  
6
7
Telephone Operation  
Telephone Operation  
Customizing your telephone  
Customizing your telephone  
Follow the steps below to program the telephone. To  
stop at any time, press OFF. If the phone rings, program-  
ming stops automatically so you may answer the call.  
Choose dial mode  
1 Press PROG to begin programming.  
2 Press ^ until screen displays DIAL MODE & setting.  
3 Press SELECT to change current setting:  
Choose ringer sound  
1 Press PROG to begin programming.  
2 Press ^ until screen displays RINGER & setting.  
3 Press SELECT to change current setting:  
DIAL MODE: TONE  
Default setting: Tone  
4 Press ^ to display TONE or PULSE.  
RINGER: 1  
5 Press SELECT to select displayed dial mode and exit.  
Default setting: 1  
Press PROG  
Choose language  
to begin programming  
4 Press ^ to display 1, 2, 3, 4 or OFF. You will hear a  
sample of each ringing type.  
1 Press PROG to begin programming.  
2 Press ^ until screen displays LANGUAGE & setting.  
3 Press SELECT to change current setting:  
Press  
features one by one  
^
or  
V
to display  
5 Press SELECT to select displayed ringing type and exit.  
Press SELECT to modify a  
displayed feature  
Set handset display date and time  
LANGUAGE: ENGLISH  
1 Press PROG to begin programming.  
Default setting: ENGLISH  
To stop at any time, press OFF  
2 Press ^ until screen displays DATE/TIME  
.
3 Press SELECT to view or change date and time:  
4 Press ^to display ENGLISH, ESPANOL or FRENCH.  
DATE/TIME  
5 Press SELECT to select displayed language and exit.  
Default setting:  
1/01 12:00 AM  
AM  
1/01 12:00  
Clear “Message Waiting” alert  
4 Press ^or Vto change month, then press SELECT.  
5 Repeat Step 4 to set day, hour, minute, and AM/PM.  
6 Press SELECT to save selection and exit.  
1 Press PROG to begin programming.  
2 Press ^ until screen displays LIGHT OFF & setting.  
3 Press SELECT to change current setting:  
LIGHT OFF: YES  
NOTE: You can choose to set the time manually, or you can allow it to  
be set automatically with incoming Caller ID information. The time will be set  
automatically only if you subscribe to Caller ID service provided by your local  
telephone company (see page 5).  
4 Press ^to display YES or NO.  
5 Press SELECT to select desired setting and exit.  
10  
11  
Telephone Operation  
Telephone Operation  
Making and answering calls  
Options while on calls  
PAT JOHNSON  
*
Making and answering calls  
Caller ID  
908-555-0100  
8/12 10:06  
To answer an incoming call, press any key except OFF.  
To make a call, press PHONE, then dial a number. Press  
OFF to hang up.  
If you have Caller ID service, the caller’s number will  
appear on the display screen after the first ring (see  
page 20 for additional Caller ID features and options).  
AM  
To preview numbers before dialing, enter numbers first,  
then press PHONE to dial. Press V at any time to  
make corrections as you are entering numbers.  
Call waiting  
If you have Call Waiting service, you will hear a beep if  
someone calls while you are already on a call. Press  
PHONE to put your current call on hold and take the  
new call. You can press this button at any time to  
switch back and forth between calls.  
Speed dialing & directory dialing  
To use speed dialing, press and hold a dial pad button  
(1-9) to display the number stored in that speed-dial  
location, then press PHONE to dial the number.  
Hold  
To use directory dialing, press DIR, scroll or search to  
find the number you want, then press PHONE to dial the  
number. (See pages 15-19 to enter, edit or search for  
listings in your phone directory.)  
Press HOLD to place a call on hold. Press HOLD again to  
resume the call.  
To adjust listening volume  
VOLUME  
During a call you can press ^ to increase or V to  
decrease the listening volume.  
Last number redial  
Press REDIAL on the handset to display the last number  
called. To dial the number displayed, press PHONE. To  
delete this number, press REDIAL again. This will clear  
the redial memory and leave it blank.  
12345678901  
If sound is unclear  
If noise or static disrupts a call, press CHAN to scan for a  
clearer radio channel between handset and base.  
Temporary tone dialing  
Ring silencing  
If you have dial pulse (rotary) service, you can switch to  
touch tone dialing during a call by pressing *. This  
can be useful if you need to send tone signals for access  
to answering systems or long-distance services.  
Press OFF while the phone is ringing to silence the  
ringer without disconnecting the call.  
12  
13  
Telephone Operation  
Directory Dialing  
Handset locator  
PAT JOHNSON  
5550100  
Handset locator  
Directory dialing  
If the handset is misplaced, press the PAGE/HANDSET  
LOCATOR button in the handset cradle on the base. The  
handset will beep for 60 seconds to help you find it.  
When the handset is found, press OFF to stop the  
beeping (or press the PAGE/HANDSET LOCATOR button  
on the base).  
The telephone directory in the handset can store up to  
50 names and telephone numbers. Each entry can  
contain a number up to 24 digits, and a name up to 15  
letters long. A convenient search feature can help you  
find and dial numbers quickly (see pages 16-19).  
Speed dialing  
The first nine memory locations (1 through 9) are  
reserved for numbers you dial frequently. These  
numbers can be dialed with two button presses (see  
next page).  
Error tones  
If all memory locations are in use, an error tone will  
sound when you attempt to enter a number. This  
means the memory is full, and you will not be able to  
store a new number until you delete an existing one.  
14  
15  
Directory Dialing  
Directory Dialing  
PROG  
PROG  
1
2
3
1
2
3
Speed dialing  
Entering names into directory  
DIRECTORY  
DIRECTORY  
Numbers called most frequently can be stored in memory  
locations 1-9 and dialed with only two button presses.  
To enter a name  
SELECT  
Press dial pad buttons once for the first letter, twice for  
the second, three times for the third, as shown in the  
example below. To enter a number, continue pressing  
the button until the number appears.  
^
SPEED DIAL  
You can enter 9 Speed Dial numbers up to 24 digits  
long. Each number is stored in a one-digit memory  
location (1-9).  
ENTER NAME  
Press once to enter “A”  
Press twice to enter “B”  
Press 3 times to enter “C”  
SELECT  
To enter a Speed Dial number  
ENTER 1-9  
1 Press PROG to begin programming.  
2 Press ^ to display SPEED DIAL  
.
Press 4 times to enter “2”  
PAT JOHNSON_  
2
3 Press SELECT.  
ENTER NAME  
The cursor moves to the right when you press another  
dial pad button or the ^ button. Press ^ twice to  
enter a space. When the name is complete, press SELECT.  
4 Press dial pad to choose memory location (1-9).  
01  
SELECT  
5 Enter a name (up to 15 characters), then press  
4
5
SELECT.  
(See Steps 3-7 on next  
page.)  
ENTER NUMBER  
Options while entering names:  
6 Enter a telephone number (up to 24 digits), then  
• Press V to erase letters if you make a mistake.  
press SELECT.  
• Press # repeatedly to enter an ampersand (&),  
apostrophe ('), comma (,) hyphen (-), period (.), or  
pound sign (#).  
7 Choose distinctive ringing (yes or no).  
8 Press PROG to store the number. You will hear a  
confirmation tone.  
PAT JOHNSON  
5550100  
To enter a number  
To call a Speed Dial number  
Use the dial pad to enter up to 24 digits. When the  
number is complete, press SELECT.  
To use speed dialing, press and hold a dial pad button  
(1-9) to display the number and name stored in that  
speed-dial location, then press PHONE to dial the  
number.  
SELECT  
6
7
Options while entering numbers:  
• Press V to erase numbers if you make a mistake.  
DISTINCT RING? N  
5550100  
• Press REDIAL/PAUSE to enter a 4-second dialing  
NOTE: To view another Speed Dial number, Press "OFF".  
Follow the instruction "To call a Speed Dial Number"  
to display another Speed Dial number.  
pause.  
SELECT  
To assign a distinctive ring  
NEW 00 OLD 07  
Press ^ to select Y (yes) or N (no). If you choose Yes  
(and if you have Caller ID service), a different ringing  
style will alert you when this person calls.  
To change or delete a Speed Dial number  
AM  
1/01 12:00  
Press and hold a dial pad button (1-9) to display the  
entry you want. Press SELECT, then press ^ until  
the option you want is displayed (see page 19).  
Press SELECT to choose the option displayed (Y or N)  
and store this entry in the directory.  
16  
17  
Directory Dialing  
Directory Dialing  
DIR  
DIR  
1
2
1
2
3
Directory name search  
To move, edit or delete a listing  
DIRECTORY  
DIRECTORY  
Follow the steps at left to browse through the tele-  
phone directory, or search to find a specific entry. You  
can press OFF at any time to exit the directory.  
When any listing is displayed, press SELECT to see options.  
Press ^ or V to highlight the option you want  
(blinking text), then press SELECT again to select it.  
^
^
ADAM  
ADAM  
5551234  
5551234  
To browse through the directory  
To move a listing  
To browse, press ^ or V to scroll through all list-  
ings one by one.  
When SPEED is blinking, press SELECT, then dial a  
memory location (1-9) to transfer this entry to your  
Speed Dial directory.  
To display first listing  
SELECT  
SPEED EDIT ERASE  
5551234  
^ V  
To search alphabetically  
BETH  
To edit a listing  
To shorten your search, use the telephone dial pad to  
enter the first letter of a name, then press ^ to scroll  
forward until you find the name you want.  
5554321  
^
SPEED EDIT ERASE  
Press ^ until EDIT is blinking, then press SELECT.  
You can change the name, number or distinct ring  
setting by following the steps described on page 17.  
To scroll name by name  
5551234  
Press dial pad buttons once for the first letter, twice for  
the second, three times for the third, as shown below.  
5
To delete a listing  
^
SPEED EDIT ERASE  
2........................Find names beginning with “A”  
JOHN  
Press ^ until ERASE is blinking, then press SELECT  
to display a confirmation screen (ERASE NO YES).  
5550123  
22  
222......Find names beginning with “C”  
..............Find names beginning with “B”  
5551234  
To search alphabetically  
To delete the listing, press ^ to highlight YES, then  
Press SELECT to  
choose blinking option  
press SELECT.  
3........................Find names beginning with “D”  
PHONE  
33  
333......Find names beginning with “F”  
..............Find names beginning with “E”  
To abort the procedure and leave the listing intact,  
press V to highlight NO, then press SELECT.  
PHONE ON  
5550123  
To call a displayed number  
To dial this number  
When you find the listing you want, press PHONE to  
dial. Or press SELECT to display other options (see  
next page).  
18  
19  
Caller ID Operation  
CID  
1
2
3
4
Caller ID Operation  
To review your call log  
PAT JOHNSON  
908-555-0100  
AM NEW  
When the phone is not in use, press CID to display  
information about the most recent caller.  
8/12 10:06  
03  
PAT JOHNSON  
*
How Caller ID works  
908-555-0100  
8/12 10:06  
If you subscribe to Caller ID service provided by your  
local phone company, information about each caller will  
be displayed after the first ring.  
AM NEW  
V
CHRIS WILLIAMS  
03  
To review your call log  
908-555-1234  
AM NEW  
Press V to scroll backward (display older calls) or ^  
to scroll forward (display newer calls). The highest call  
number is the most recent call received.  
8/12 9:53  
02  
Asterisk means same caller  
has called more than once  
V
MARK CLAYTON  
Caller’s name  
PAT JOHNSON  
*
908-555-5678  
Caller’s phone number  
908-555-0100  
8/12 10:06  
To return a call  
AM NEW  
8/12 9:12  
01  
AM NEW  
03  
Press PHONE to call the person currently displayed (see  
page 22 for important dialing options).  
PHONE  
Date of call Time of call  
Call number  
and designation  
(new or old)  
PHONE ON  
9085555678  
Other options  
Press SELECT at any Caller ID screen to see options  
(Dial or Program; see pages 22-24).  
Information about the last 90 incoming calls is stored in  
your call log. You can review the call log to find out  
who has called, return the call without dialing, or  
transfer the caller’s name and number into your phone  
directory.  
To dial this number  
New and Old calls  
Each screen of information is designated New until you  
have read it by reviewing the Call Log. Each screen you  
display is then designated Old.  
Each incoming call is numbered. The most recent call is  
assigned the highest number. When the call log is full,  
the oldest call information is deleted to make room for  
new incoming call information.  
If you answer a call before the information appears on  
the screen, it will not be saved in your call log.  
Display screen messages  
PRIVATE NAME  
PRIVATE CALLER  
UNKNOWN NAME  
Name of caller is not revealed at caller’s  
request.  
Name and telephone number of caller are not  
revealed at caller’s request.  
Your phone company is unable to determine  
caller’s name.  
UNKNOWN CALLER Your phone company is unable to determine  
caller’s name and telephone number.  
20  
21  
Caller ID Operation  
Caller ID Operation  
CID  
CID  
1
2
1
2
3
To dial a call log entry  
To delete call log entries  
PAT JOHNSON  
PAT JOHNSON  
908-555-0100  
908-555-0100  
AM NEW  
8/12 10:06  
AM NEW  
When any Caller ID screen is displayed, press PHONE  
to dial the number exactly as it appears on the screen.  
8/12 10:06  
03  
03  
To delete a single call log entry  
PHONE  
Press CID, to display the first Caller ID listing. Use the  
up/down arrow keys to find the entry you want to  
delete, then press CHAN/DELETE. When the entry is  
deleted, the next oldest record is displayed.  
V
CHRIS WILLIAMS  
PHONE ON  
Dialing options  
9085550100  
908-555-1234  
AM NEW  
Caller ID numbers may appear with an area code that  
may not be required for local calls.  
8/12 9:53  
02  
CHAN/DELETE  
To delete all call log entries  
If the number displayed is not in the correct format,  
you can change how it is dialed. Press # repeatedly  
to see dialing options. With each button press a new  
option will be displayed. Press PHONE to dial when the  
number appears in the proper format for your area.  
Or  
MARK CLAYTON  
To clear your call log completely, press and hold  
CHAN/DELETE while the phone is idle (not in use). This  
will display a confirmation screen asking if you want to  
erase all entries in the Caller ID log. If you select YES,  
the call log will be cleared and the screen will return to  
normal standby display, showing no old or new calls.  
908-555-5678  
AM NEW  
CID  
8/12 9:12  
01  
1
2
3
PAT JOHNSON  
908-555-0100  
Or  
Example:  
AM NEW  
8/12 10:06  
03  
CID ......................Number displayed as 1-800-555-1234  
NEW 00 OLD 27  
#
PAT JOHNSON  
#........................Number changes to 555-1234 (drops “1” + area code)  
PHONE ................Dials 555-1234  
AM  
1/01 12:00  
555-0100  
AM NEW  
8/12 10:06  
03  
CHAN/DELETE  
1
2
3
PHONE  
ERASE ALL NO YES  
PHONE ON  
5550100  
^
ERASE ALL NO YES  
SELECT  
NEW 00 OLD 00  
AM  
1/01 12:00  
Call log cleared  
22  
23  
Caller ID Operation  
Appendix  
CID  
1
2
3
To add entries to phone directory  
Display screen messages, lights and tones  
PAT JOHNSON  
908-555-0100  
AM NEW  
When any Caller ID screen is displayed, follow the  
steps at left to enter it into your phone directory.  
8/12 10:06  
03  
Screen display messages  
SELECT  
^
Both the caller’s name and telephone number will be  
entered as they appear in the call log. At steps 3-4, you  
can make any changes to the name or number by using  
the V button to erase characters, or using the dial pad  
to enter new ones (see page 17 for instructions).  
DIAL  
PROGRAM  
The handset is waiting for a dial tone.  
CONNECTING...  
** RINGING **  
** PAGING **  
NEEDS RECHARGING  
BATTERY LOW  
PHONE ON  
908-555-0100  
AM NEW  
8/12 10:06  
03  
CONNECTING...  
There is a call coming in.  
SELECT  
When the number is stored, the screen returns to the  
call log display. The entry copied to your phone direc-  
tory remains in the call log until deleted.  
The handset locator has been activated  
(handset beeps to help you locate it).  
PAT JOHNSON  
9085550100  
Handset battery is depleted. Place  
handset in base to charge the battery.  
Edit name as desired  
Handset battery is low. Place handset in  
base to charge the battery.  
SELECT  
4
5
6
PAT JOHNSON  
9085550100  
The handset is in use.  
You have new voice mail (requires voice  
mail service from local telephone company)  
MESSAGES WAITING  
RINGER OFF  
HOLD  
Edit number as desired  
SELECT  
The handset ringer is turned off.  
DISTINCT RING? N  
9085550100  
Current call is on hold.  
Handset is scanning for a clear channel  
to improve sound quality.  
SCANNING...  
SELECT  
Telephone is not connected. Check line  
cord and jack.  
NO CONNECT  
PAT JOHNSON  
908-555-0100  
AM NEW  
8/12 10:06  
03  
Entry added to phone  
directory  
24  
25  
Appendix  
Appendix  
Display screen messages, lights and tones  
In case of difficulty  
If you have difficulty with your phone, please try the suggestions below. For Customer  
Service, visit our web site at www.telephones.att.com, or call 1 800 222–3111.  
Alert tones  
Make sure the battery pack is installed and charged correctly (see  
page 7).  
Telephone does  
not work at all  
“Beep-Beep...Beep-Beep...”  
Handset battery is low. Place handset in  
base to charge the battery.  
(Double beep every 5 seconds)  
Make sure the AC adapter is plugged into an outlet not controlled by  
a wall switch.  
“Beep-Beep-Beep”  
(3 quick beeps)  
Error tone (current operation has been  
unsuccessful; try again).  
Make sure the telephone line cord is plugged firmly into the base unit  
and the modular jack.  
“Beeeeeeeeep”  
(1 long beep)  
Confirm tone (current operation has been  
successfully completed).  
Make sure the base antenna is fully upright.  
If you have dial pulse telephone service, make sure the dial mode is  
set to dial pulse (see page 11).  
If these suggestions do not work, unplug the base, remove and re-  
insert the battery, then place the handset in the base to re-initialize.  
Make sure the ringer is on (see page 10).  
Phone does not  
ring  
Make sure the telephone line cord and AC adapter are plugged in  
properly (see page 6).  
Make sure the base antenna is fully upright.  
Move the handset closer to the base.  
You might have too many extension phones on your telephone line to  
allow all of them to ring. Try unplugging some of them.  
Indicator lights  
Make sure the base antenna is fully upright.  
If you hear  
noise or  
interference  
during a call  
NEW CALL  
If you have Caller ID service: On  
when new calls have been received;  
off when all new Caller ID records  
have been reviewed (see page 20).  
You may be out of range. Move closer to the base.  
Press CHAN to select another channel. If noise is exceptionally loud,  
move closer to the base before changing channels.  
Appliances plugged into the same circuit as the base can cause  
interference. Try moving the appliance or base to another outlet.  
The layout of your home or office might be limiting the operating  
range. Try moving the base to another location, preferably on an  
upper floor.  
IN USE/CHARGING  
Steady: Handset battery is charging  
Slow Flashing: Phone is in use  
Fast Flashing: Call is on hold  
If the buttons don’t work, try placing the handset in the base for at  
least 15 seconds.  
Disconnect the base from the modular jack and plug in a corded tele-  
phone. If calls are still not clear, the problem is probably in your  
wiring or local service. Call your local telephone service company.  
MESSAGE  
Flashes when you have new voice  
mail (requires voice mail service  
from your local telephone company).  
You were probably almost out of range. Move closer to the base  
before changing channels. Before placing another call, set the hand-  
set in the base for at least 15 seconds.  
If you lose a call  
after changing  
channels  
26  
27  
Appendix  
Appendix  
Technical specifications  
Index  
AC adapter, 6  
Alert tones, 26  
Answering calls, 12  
Antenna, 7  
Hold, 13  
RF Frequency Band  
912.75 MHz — 917.10 MHz  
Incoming call log, 21  
Incoming calls, answering, 12  
Indicator lights, 3, 26  
(Handset to Base)  
RF Frequency Band  
(Base to Handset)  
2410.2 MHz — 2418.9 MHz  
Battery, 7  
Belt clip, 9  
Blocked caller/name, 20  
Last number redial, 12  
Locate handset, 14  
Low battery, 7  
Channels  
30  
Call logs, 21  
Caller ID, 5, 20  
Channel Spacing  
Output Power  
Sensitivity  
300 KHz  
3 dBm  
-108 dBm  
FM  
Making calls, 12  
Missed calls, 20  
add entries to phone directory, 24  
delete entries, 23  
dial entries, 22  
Names,  
Call waiting, 5, 13  
Change channel, 13  
CID, 20-24  
enter into directory, 17  
search for, 18  
Modulation  
Operating range, 5  
Date/time, 10  
Operating Temperature  
32°F — 122°F  
0°C – 50°C  
Delete Call Log entries, 23  
Delete directory entries, 19  
Dialing,  
Pause (while dialing), 17  
Quick reference guide, 2-3  
Base Unit Voltage  
(AC Voltage, 60Hz)  
108 — 132 Vrms  
directory dialing, 15  
manual dialing, 12  
speed dialing, 16  
Receiving calls, 12  
Recharging, 7  
Redial, 12  
Ring silencing, 12  
Ring tone options, 10  
Base Unit Voltage  
(AC Adapter Output)  
9 Vdc @300 mA  
Directory dialing,  
delete entries, 23  
dial number, 16, 19  
display entries, 18  
edit entries, 19  
Handset Voltage  
3.1 — 4.2 Vdc @400 mAh  
Scrolling, 18  
enter dialing pause, 17  
enter names & numbers, 17  
name search, 18  
Search for name, 18  
Speed dialing, 16  
Display screen, 2  
Technical specifications, 28  
Time, 10  
Tones,  
change ringing tone, 10  
send tones during call, 13  
set dial mode, 11  
Troubleshooting, 27  
Distinctive ring, 17  
Ending calls, 12  
Erasing directory entries, 19  
Error tones, 15  
Flash, 13  
Unknown caller, 20  
Volume controls, 2  
Handset locator, 14  
Hands-free use, 9  
Headphone, 9  
28  
29  
Copyright © 2003 Advanced American Telephones. All Rights Reserved.  
AT&T and the Globe Design are trademarks of AT&T Corp.,  
licensed to Advanced American Telephones. Printed in China. Issue 1 AT&T 12/29/03.  

Hotpoint EC6005 User Manual
Hanns G HU171D User Manual
Electrolux E36EC65ESS User Manual
Electrolux 880033 User Manual
Diamond Multimedia Radeon X1050PCIE256 User Manual
Cecilware CCB 1824 User Manual
Caldera SSK305NG C User Manual
Black Decker CTO100 Series User Manual
Airlink101 AEN U25W User Manual
Acer X223W User Manual