Thank you for choosing the Pantech Breeze C520,
our latest mobile phone.
Breeze C520
User Manual
The Pantech Breeze C520 has many features
designed to enhance your mobile experience. From
its EZ to read menus, to its sleek, stylish design,
we know you will enjoy the entire Breeze C520
experience.
This User Guide contains important and useful
information that will maximize your familiarity with all
that the Pantech Breeze C520 has to offer.
Phone overview
External
display
Camera
Speaker
Earpiece
Internal display
1 Address Book
2
3
4
5
6
Messaging
My Stuff
Tools
Settings
Phone Status
Navigation key
One-touch
Quick Call
Scroll through the menu options
Side
key
Left/Right Soft key
Perform the functions shown
at the bottom line of the display
OK key or access MEdia Net
Press to enter menu system
Internal antenna
Camera key
Speaker Mode
Send key
Power on&off/Menu exit
key/End key
note: Holding device at internal antenna
area might affect call quality reception.
Turns phone on/off, ends calls,
exits menus
Voicemail
Menu features (Breeze Mode)
Clear key and Calendar
Returns to previous screen or
deletes characters in text mode.
Access Calendar menu
Vibrate mode
Microphone
Address Book Messaging
Tools Settings
My Stuff
Phone Status
3
Menu overview
Using Shortcuts
Numbered menu
Example: Accessing the
Breeze mode menu
items, such as menus,
sub-menus, and
options can be quickly
accessed by using
their shortcut numbers.
In Menu mode,
Main Menus can be
accessed by pressing
the number keys
(1 to 0) corresponding
to their location on the
screen.
Phone Mode menu.
IM
Settings
¦P43
¦P41
Address Book
1. Press the Menu.
Contact List
¦P28
2. Press the
Settings.
3. Press the
5
for
New Contact ¦P28
My Stuff
1
for
Speed Dial
¦P27
Photo Album ¦P51
Video Album ¦P52
Phone Mode.
4. Press the
scroll key to select
the mode.
My Phone Number
U
/D
Audio
Graphics
Games & Apps ¦P54
¦P72
¦P51
Messaging
Write New
Inbox
Sent
Voice Mail
Email
¦P38
¦P36
¦P38
¦P42
¦P43
NOTE: The steps vary by mode and that throughout
the manual it will be notated by [EZ] for EZ Mode or
[ADV] for Advanced Mode.
4
Advanced mode menu
Tools
Phone Status
Phone Status ¦P62 My Phone Number
Camera
Alarm
Calendar
Notepad
¦P46 Signal Strength
¦P58 Battery Remaining
¦P58 Sound & Alerts
¦P60 Alarm
Email & IM
Messaging
Mobile Email ¦P43 Write New
¦P37
¦P36
¦P38
Voice Memo ¦P60 New Messages
IM
¦P43 Inbox
Sent
Calculator
¦P59
Outbox
Voice Mail
Settings
Settings
¦P42
¦P41
Phone Mode ¦P18
Sounds & Alerts ¦P72
Ring Volume ¦P72
Memory Info ¦P53
Wallpaper
¦P72
Backlight Timer ¦P73
Answer Type ¦P25
S
N
SIM dependent
Network dependent
5
Recent Calls
Missed Calls ¦P26 MEdia Net
Received Calls ¦P26 Home
Dialed Calls ¦P26 Bookmarks
Delete Call
Logs
MEdia Net
AT&T Mall
Games & Apps
¦P68 Shop Tones
¦
Shop Games
¦P68 Shop Graphics
¦P68 Shop Multimedia
¦P68 Shop Applications
MEdia Net Home
¦P26 Go to URL
¦
Profiles
Call Time
GPRS Info
¦P26 Options
¦P27 Security
Version
¦P68
6
My Stuff
Audio
Graphics
Address Book
Settings
Phone Mode ¦P18
Sounds & Alerts ¦P72
¦P72
¦P51
Contact List
¦P28
New Contact ¦P28
Photo Album ¦P51
Video Album ¦P52
Speed Dial
Groups
¦P27
¦P29
Display
Call
¦P72
Other Files
Tools
Memory Info ¦P53
¦P53
My Business Card ¦P61
My Phone Number¦P62
Memory Info ¦P36
Service NumbersS
Phone
Flight Mode
¦P81
Connectivity ¦P66
SecurityS
Software
Reset
¦P30
¦P74
¦P75
TTY
S
N
SIM dependent
Network dependent
7
Quick & easy
Keys
Functions
Perform the functions shown at the bottom line of the display by using these Soft keys.
< >
Scroll through the menu options in Menu mode. In standby mode,
Left Scroll: Access My Stuff menu
Right Scroll: Access Alarm menu
Up Scroll: Access Write New menu
Down Scroll: Access Contact List menu
Select a menu function or store user-input information, such as names. Also use this key for
confirmation (as the [OK] key).
@
Launch the MEdia Net directly if pressed in standby mode.
Delete characters from the display, or return to previous menu.
Open Calendar view if pressed quickly in standby mode.
C
S
Make or receive a call. Show the recent call list in standby mode.
Re-dial the last call number if pressed and held in standby mode.
8
Keys
Functions
Complete the current call. Turn on/off the phone if pressed and held.
Cancel user input and return to standby mode while in Menu mode.
E
Quickly connect to the voice mail server if pressed and held in standby mode.
1
Enters numbers, letters or special characters. Go to the dial screen if pressed in standby mode.
0~9
Enter or exit from vibrate mode if pressed and held in standby mode.
Show the symbol input screen if pressed and held in text input mode.
Work in Word search mode if pressed in the Predictive text input mode.
*
Enter the + sign prefix for international dialing if pressed and held.
Enter the space character in text input mode.
0
#
Change various text input modes if pressed and held at the text-editing screen.
Adjust the earpiece volume while making a call.
Control the Ringtone volume, vibrate mode and silent all mode in standby.
Mute the ringtone of an incoming call.
Reject the incoming call if pressed and held when you receive an incoming call.
Turn camera capture mode on. Work as a camera shutter in capture mode.
Turn the speaker mode on.
Q
N
9
Contents
Specifications.............................2
Phone overview..........................3
Using Shortcuts .........................4
Menu overview ...........................4
Quick & easy...............................8
Messaging ............................35
Receiving messages ............36
Creating and sending
text message........................37
Creating a multimedia
message............................... 38
Message template................41
Message settings ................41
Setting voice message .........42
Email.....................................43
Using instant messenger......43
2. Calls & address book
Making, receiving and
ending a call .........................22
Options during a call.............23
Call setting............................25
Checking all calls..................26
Speed dialing........................27
Using address book..............28
Caller identification...............29
Using your headset ..............29
Service number and
1. Getting started
Package contents.................14
SIM card and battery............15
Turn on/off the phone...........16
Keypad lock..........................16
Essential display indications..17
Setting theme .......................18
EZ quick call keys.................19
Updating software ................19
fixed dialing...........................30
4. Multimedia
Camera.................................46
Photo album .........................51
3. Messaging
Entering text .........................34
Video album..........................52
Other files .............................53
Managing the memory .........53
Playing games .....................54
6. Connectivity
8. Appendix
Bluetooth ..............................66
Using the browser ................68
Profiles setting......................69
Alert message.......................78
Troubleshooting checklist.....79
Safety information ................80
Safety precautions................80
About the battery usage .......82
Hearing aid compatibility
with mobile phones ..............83
FCC regulatory compliance ....84
Warranty...............................86
5. Useful features
7. Settings
Calendar...............................58
Alarm ....................................58
Calculator, converter and
stopwatch .............................59
Notepad and voice memo ....60
Business card.......................61
Phone status.........................62
Language..............................72
Time and date.......................72
Ringtones ............................72
Decorating the display..........72
Locks ....................................73
To enable fixed dialing ........74
Reset ....................................74
TTY.......................................75
Contents
Breeze
C520
1
01
02
03
04
05
06
07
08
Getting started
Calls & address book
Messaging
Multimedia
Useful features
Connectivity
Settings
Appendix
Getting started
Package contents
SIM card and battery
Turn on/off the phone
Keypad lock
Essential display indications
Setting theme
EZ quick call keys
Updating software
Package contents
Phone
Battery
Travel charger
User Manual
14
01
02
03
04
05
06
07
08
other forms of battery technology, you can
recharge your battery while some charge remains
without reducing your phone’s autonomy due
to the “battery memory effect” inherent in those
technologies.
SIM card and battery
About your SIM card
When you subscribe to your network operator,
you receive a SIM (Subscriber Identity Module)
card containing your registration information,
PIN code, etc.
Like a credit card, it should be kept secure and
handled carefully. Do not bend, scratch or expose
it to moisture. Avoid static electricity. To avoid
corrupting your SIM card’s memory, always switch
your phone off before removing or inserting your
SIM card.
Installing/removing SIM card
and battery
1. Remove the battery cover
from the unit. To fit the battery
cover, put it on the guide rail
and push up.
2. Insert the SIM card into the
slot. The gold contacts of the
SIM card should go against
the metal contacts of the
phone. Put the contacts of the
battery into the hole located at
About your battery
Your phone uses a Li-Ion battery. Make sure to
use an authorized battery and charger only. For
more details, please inquire at your nearest dealer.
note: Your phone is powered by a Lithium
Ion (Li-Ion) battery. This means that, unlike
Getting Started 15
2. To remove the adapter
connection press the
adapter’s side buttons (1)
and pulling the adapter
away (2).
the upper side of the unit, then
insert and press the bottom
side of the battery until you
hear the “click”.
3. To remove the battery push
the bottom of the battery to
upwards (1) and remove (2)
the battery. Push the SIM card
in the arrow direction as shown.
Turn on/off the phone
To turn on
1. Press and hold
E
.
To turn off
1. Press and hold
E
.
To charge your battery
1. To charge, open the protective
cover on the top left side and
connect the charger adapter.
The arrow on the charger have
to face the top of the phone.
Keypad lock
Locking the keypad
1. Press Menu >
*
to lock.
Unlocking the keypad
1. Press Unlock >
*
within 3 seconds to
unlock.
16
01
02
03
04
05
06
07
08
Received one or more FAX messages
Received one or more other messages
Received one or more voice messages
A message is being sent
A message is being received
An alarm is set
Bluetooth is active
Headset is connected
TTY is active
An EDGE signal is available. It is displayed
when there is an active EDGE session
Essential display indications
Signal strength. The greater the number of
bars, the stronger the signal. When network is
in searching mode is displayed.
Flight mode is active.
A call is being made. When you are in no
service area is displayed
Call forwardingN is active
FAX modeN is active
DataN folder
Incoming calls set to ring only (Normal)
Incoming calls set to Vibrate then Ring
Incoming calls set to Vibrate Only
Incoming calls set to Silent
Received one or more text messages
Received one or more multimedia messages
Received one or more WAP push messages
A GPRS signal where only 2G is available. It is
displayed when there is an active GPRS session.
WAP is connected. When the security is set
is displayed.
Battery strength. When the battery charge is
low,
is displayed
N Network dependent
Getting Started 17
< Breeze Mode>
<Advanced Mode>
Available, Away, Invisible Status of AIM
Online, Away, Busy, Offline Status of MSN
Available, Busy, Invisible Status of YAHOO
You have received one or more IM messages
To change the theme
Setting theme
1. Press Menu > Settings > Phone Mode.
2. Select Breeze Mode or Advanced Mode.
Your phone has two customized themes, Breeze
and Advanced. The default is set to Breeze mode
which provides EZ access to the functions used
most frequently. In the Breeze mode, you view an
abbreviated menu: Address Book, Messaging,
My Stuff, Tools, Settings and Phone Status.
The Advanced mode allows access to all menu
items.
Assigning the menu
In Breeze Mode, you can set the most commonly
used menu in Options in standby mode.
1. Press Options in standby mode > select
Unassigned.
2. Press Options > Edit.
3. Select the menu and sub menu.
18
01
02
03
04
05
06
07
08
EZ quick call keys
Updating software
You can update your software without visiting your
nearest dealer.
To update the software ADV
1. Press Menu > Settings > Software >
Software Update.
2. Press Phone Information to check software
version of your phone.
3. After checking your software version, press
Getting in touch with those you
call most is now as EZ as 1-2-3.
note: The following direction is an example with
using
x
key. The usage of
y
and
z
key will
be same as the following.
To assign a contact
1. Press
x.
2. Press Option > Assign Contact.
3. Select a contact > Options >
@
.
@
.
4. Press Check for Update > Yes.
To use call using one touch key
1. Press and hold to call.
To view the version of software ADV
1. Press Menu > Settings > Software >
Software Version.
x
To send a message using one touch key
1. Press
2. Press Option > Send Message.
x
.
Getting Started 19
Breeze
C520
2
01
02
03
04
05
06
07
08
Getting started
Calls & address book
Messaging
Multimedia
Useful features
Connectivity
Settings
Appendix
Calls & address book
Making, receiving and ending a call
Options during a call
Call setting
Checking all calls
Speed dialing
Using address book
Caller identification
Using your headset
Service number and fixed dialing
Making a call using call list
Your phone logs up to 30 dialed, received and
missed call numbers.
Making, receiving and
ending a call
1. Press
S
to display the Recent Calls list.
2. Select All Calls, Missed Calls, Received
Calls, or Dialed Calls by pressing the L/R
key.
Making a call
1. Enter the area code and phone number.
2. Press
S.
3. Select a number.
4. Press
S
to dial the selected number.
Answering a call
note: To redial the last number in the Recent Calls
list, press
1. Press
S.
S
.
Ending a call
Making a call during a call
1. Enter the phone number or press Options >
Contact Search.
1. Press
E.
Once the call is completed, a call summary is
displayed.
2. Press
S
to dial the second call. The first call
Rejecting a call
is automatically put on hold.
1. Press
E
or Ignore.
22
01
02
03
04
05
06
07
08
2. Select a number to call by pressing the U/D
Switching between two calls
key.
3. Press
1. Press Swap.
S.
Making an international call
Answering a second callN
1. Press and hold
0
key for the international
1. Press
S. The first call is automatically put
prefix until the ‘+’ character appears.
2. Type the country code, area code, and phone
number.
on hold.
2. Press
E
to end the second call.
The call on hold is automatically reconnected.
3. Press
S.
Making an emergency call
Options during a call
You can make emergency calls even if your phone
does not have a SIM card.
Microphone off and on
1. Press Emergency Number, or press SOS if
your phone does not have a SIM card.
Switching your phone’s microphone off
1. Press Mute [ ].
2. Press
S.
Switching your phone’s microphone back
Replying to a missed callN
1. Press View to display the list of missed calls.
on
1. Press Unmute.
Calls & address book 23
Adding a caller to a multi-party call
Talking on speaker
1. Press the key above the send key.
1. Press Options > Join All.
N
Having a private conversation with one
participant
1. Press Options > Split.
Putting a call on hold and returnN
Putting a call on hold
2. Press
@.
1. Press Options > Hold or press
S.
3. Select the participant and press
@.
Returning to a held call
1. Press Retrieve or press
All of the multi-party call participants can now hear
each other.
S
again.
Multi-party callsN
Removing one participant from a multi-
party call
You can talk with more than one person or
conference call.
1. Press Options > End Call.
2. Select the participant and press
@.
Making a multi-party call
1. Call the first participant.
2. Call the second participant. The first call is
automatically put on hold.
The call ends with that participant, but you can
continue to talk with other participants.
3. Press Options > Join.
24
01
02
03
04
05
06
07
08
Searching a number in address book
during a call
Reading a message during a call
1. Press Options > Messaging.
2. Press Inbox > select a message.
1. Press
D
or press Options > Contact Search.
2. Select a number >
S
.
Writing a message during a call
1. Press Options > Messaging.
2. Press Write New.
For details on creating a text message, see
page 37.
note: During the call, you can only send text
messages. Multimedia messages cannot be sent,
but can be saved.
Searching for a name or group in address
book
Enter the first letters of the name for Name
Search. The entries are displayed starting with the
first entry matching your input.
Finding a name manually in address book
1. Press the U/D key.
Call setting
Answering with any key press
1. [EZ] Press Menu > Settings > Answer Type.
[ADV] Press Menu > Settings > Call > Answer
Type.
Viewing the details of highlighted entry in
address book
1. Press
@.
For details on address book, see page 28.
Calls & address book 25
Calls.
2. Select Any Key.
Viewing dialed calls ADV
note: You can answer with any key except
and Reject.
E
1. Press Menu > Recent Calls > Dialed Calls.
Deleting call logs ADV
1. Press Menu > Recent Calls > Delete Call
Logs.
Setting auto redial ADV
1. Press Menu > Settings > Call > Auto Redial.
2. Select All Calls > Yes.
note: If no logs exist, the message “List Empty”
appears.
Viewing call time ADV
1. Press Menu > Recent Calls > Call Time.
2. Press U/D to view Last Call, Received
Calls, Dialed Calls, and Total Calls.
2. Select On or Off.
Checking all calls
You can view information about all Recent Calls.
For more options for all, missed, received and
dialed calls press Options. In Beeze mode press
S
to view all Recent Calls.
Viewing missed calls ADV
Resetting all call times ADV
1. Press Menu > Recent Calls > Call Time.
2. Press Reset Call Times.
1. Press Menu > Recent Calls > Missed Calls.
Viewing received calls ADV
1. Press Menu > Recent Calls > Received
2. Enter password >
@.
26
01
02
03
04
05
06
07
08
note: The default password is ‘1234’.
Setting speed dial
1. Press Menu > Address Book > Speed Dial.
2. Select an empty entry and press Add.
Viewing data transmitted information ADV
1. Press Menu > Recent Calls > GPRS Info.
• Current Info: You can view transmitted data in
the current session, in Kbytes.
• Last Info: You can view Sent, Received,
and Total transmitted in previous sessions, in
Kbytes.
• Total Info: You can view all Sent, Received,
and Total transmitted data in Kbytes.
• Clear Logs: The default password is ‘0000’.
3. Select a person and press
Select.
@
or Option >
Changing speed dialing person
1. Press Menu > Address Book > Speed Dial.
2. Select a number and press
@
or Options >
Edit.
3. Select a person and press
@
or Option >
Select.
Speed dialing
Removing from speed dial
You can dial quickly using speed dialing. Up to 8
phone numbers can be progrmmed using
numbers 2 to 9.
1. Press Menu > Address Book > Speed Dial.
2. Select a number and press Options >
Remove.
1
0
: Voice mail
: Prefix for international call
Calls & address book 27
Viewing contact list
1. Press
Setting speed dial from address book
1. Press Menu > Address Book > Contact List.
2. Select a person > Options > Add to Speed
Dial.
D
or press Menu > Address Book >
Contact List.
note: In Advanced Mode youou can set speed dial
when you are viewing contact list. Press Options >
Add to Speed Dial.
3. Select an entry and press
@
or Select.
Searching for a phone number
Using address book
You can save names, phone numbers, and
information on the SIM or phone. Entries can
depend on the capacity of the SIM card.
1. Press Menu > Address Book > Contact List.
2. Input the first letter or two of the person’s name
and scroll with U/D
.
3. Press to view detail information.
@
4. To update information press Options > Edit.
Adding a contact
1. Press Menu > Address Book > New Contact.
2. Select SIM Card or Phone.
3. Input the fields.
Calling from contact list
1. Press
Contact List.
2. Select a person to call.
D
or press Menu > Address Book >
4. Press
@
or Options > Save.
3. Press
S.
28
01
02
03
04
05
06
07
08
Forwarding contact details
Caller identification
1. Press Menu > Address Book > Contact List.
2. Select a contact > Options > Forward
Contact Info.
Caller identificationN
ADV
1. Press Menu > Settings > Call > Caller ID.
2. Select Send My No. or Hide my No. > Select.
3. You can send the information Send as
Multimedia Message or Send via Bluetooth.
Using your headset
You can send or receive a call using your headset.
When you connect your headset to the jack the
button on the headset works as follows.
note: You need to use the headset designed for
this device and it is optional item. Also not every
headset has a button.
Deleting a contact
1. Press Menu > Address Book > Contact List.
2. Select a contact > Options > Delete.
Making a groups ADV
1. Press Menu > Address Book > Groups.
2. There will be defaulted groups.
3. To add new group press Options > New.
4. To edit group press Rename.
5. To set a specific ring tone, press Options >
Group Ring tones.
While in standby mode
1. Press the button once to list recent calls.
2. Press the button twice to redial the last call.
Calls & address book 29
service.
1. Press Menu > Settings > Security.
2. Press Fixed Dialing > Fixed Dial List.
note: PIN2 must be correctly entered within 3
attempts. If you input incorrect code three times
in a row the PIN2 code will be blocked. If the
PIN2 code is blocked please contact your service
provider. PIN2 code is supplied with SIM card.
While the phone is closed
1. Press the button once to receive a call.
2. Press the button once to end the call.
Service number and
fixed dialing
Calling your service numbersS
ADV
You can see the service number to reach the
service provider.
1. Press Menu > Address Book > Service
Numbers.
2. Select a number > press
S.
Viewing fixed dialing list ADV
Fixed dialing is a service that limits your access to
specific numbers in the address book list recorded
on the SIM. Input the PIN2 to set up or cancel this
30
01
02
03
04
05
06
07
08
Calls & address book 31
Breeze
C520
3
01
02
03
04
05
06
07
08
Getting started
Calls & address book
Messaging
Multimedia
Useful features
Connectivity
Settings
Appendix
Messaging
Entering text
Messaging
Receiving message
Creating and sending text message
Creating a multimedia message
Message template
Message settings
Setting voice message
Email
Using instant messenger
Key characters by language
Each of the following keys will scroll through these
sequential options listed by language.
Entering text
You can enter text with multi-tap, predictive,
numeric or symbol.
Key
English
Spanish
French
. , - ? ! ' @ : 1
1
2
3
4
5
6
7
8
9
0
Useful keys
a b c 2
d e f 3
á ã ç
ç à â á ä
é è ê ë
î ï í
Display and undisplay symbols
*
0
#
é
í
Adding space
g h i 4
Press to change capital mode.
Quick press to change dbc and long
press to change from multi to predictive to
Number to Symbol
j k l 5
ó ñ
ô ó ö ñ
ß
m n o 6
p q r s 7
t u v 8
ú ü
ù û ú ü
Multi-tap dbc (all small caps / first letter
caps / all caps)
Predictive gef (all small caps /
first letter caps / all caps)
w x y z 9
Space + = < > € £ $ ¥ % & 0
Number a
Symbols h
34
01
02
03
04
05
06
07
08
To write the letter “C”, press
2
3 times. To
Predictive mode (T9)
write number 2 press
2
4 times.
The predictive mode automatically compares your
keystrokes with an internal linguistic dictionary to
determine the correct word. The most commonly
used word will appear first. To save a word not
listed in phone’s dictionary press Options > My
word.
Numeric mode
You can input numbers in this mode.
1. Press and hold
2. Press to
numbers.
#
to change the mode 123.
1
9
and 0 to input
1. Press and hold
T9.
#
to change the mode as
Symbol mode
You can input symbols.
1. Press and hold
symbols.
2. Press
2
to
9
to input text. For example,
to write ‘hello’ press 43556
.
#
to change the mode as
Alphabet input mode
2. Press
1
to
0
input symbol. For more
.
Press the key labeled with the target letter once for
the first letter; press it twice for the second letter,
and so on.
symbols press U/D
Messaging
1. Press and hold
multi-tap.
#
to change the mode as
You can send, receive and save text and
multimedia messages.
2. Press
2
to
9
to input text repeatedly.
Messaging 35
Deleting a message in a mailbox
1. Press Menu > Messaging > Inbox.
2. Select a message > Options > Delete > Yes.
Managing memory
When the message box is full the messages full
icon will appear.
Replying to a message
1. Press Menu > Messaging > Inbox.
2. Select a message > Reply.
When
It means
Text message is full
Multimedia message is full
Viewing memory space information ADV
1. Press Menu > Messaging > Memory Info.
2. Press L/R to view SIM and Phone memory.
Moving a message to SIM ADV
1. Press Menu > Messaging > Inbox.
2. Select a message > Options > Move To SIM.
Receiving messages
Moving a message to phone ADV
1. Press Menu > Messaging > Inbox.
2. Select a message > Options > Move To
Phone.
Viewing a new message
1. Press View or press
@.
Reading a message from the inbox
1. Press Menu > Messaging > Inbox.
2. Select a received message >
@.
36
01
02
03
04
05
06
07
08
3. To reply press Reply.
2. Press Options > Save Objects.
3. Select an object > Save.
Saving number or e-mail from received
message
4. Edit the filename > Options > Save.
It will be saved in one of the categories in the
My Stuff folder.
1. Press Menu > Messaging > Inbox.
2. Select a received message >
@.
For details on photo album, see page 51.
3. Press Options > Save Number & Email.
4. Press Options > Save.
5. Select New Contact or select Update
Existing.
Listening to voice messages
1. Press and hold
Messaging > Voice Mail.
It will automatically call to the voice mail center.
1
or press Menu >
Saving URL address from received message
1. Press Menu > Messaging > Inbox.
2. Select a received message >
3. Press Options > Save URL.
4. Press Options > Save.
Creating and sending
text messages
@.
Sending new text message
Saving the object in the received
multimedia message
1. Open the multimedia message.
1. Press
New.
U
or press Menu > Messaging > Write
Messaging 37
Creating a multimedia
2. Press Text Message.
3. Write the message.
message
4. Press
@.
You can create new multimedia message.
Capacity is 300kb and will alert you once that is
exceeded via error message.
5. Enter the phone number to send or press
Options > Contact List > find a person to
send.
6. To send more then one person press
select. To unselect press
Adding saved picture to the message
1. Press Menu > Messaging > Write New.
2. Select Multimedia Message.
@
to
@
.
7. To view sent message press Menu >
3. Write a message.
Messaging > Sent.
4. Press Options > Add Object > Add Image.
5. Select Photo Album > select a picture >
Options Select.
note: You can send up to 10 person at a time.
note: All successfully sent messages will save in
Sent.
6. To preview press Options > Preview.
7. To edit the text message, press U/D to select
the text box, press Options > Edit Text.
Finding all sent messages
1. Press Menu > Messaging > Sent.
8. Press
@.
38
01
02
03
04
05
06
07
08
6. To listen select the recorded memo > Play.
7. To stop press
8. To select other recorded memo press Back
and select other memo.
Adding new picture to the message
1. Press Menu > Messaging > Write New.
2. Select Multimedia Message.
D.
3. Write a message.
9. Press Options > Send to.
4. Press Options > Add Object > Add Image.
5. Select Take a Photo > focus on the object >
Adding new voice memo to the message
1. Press Menu > Messaging > Write New.
2. Select multimedia message.
@
.
6. Press Insert.
7. Press Options > Send to.
For details on taking a pictures, see page 48.
3. Write a message.
4. Press Options > Add Object > Add Sound.
5. Select New Voice Memo > record the sound.
Adding recorded voice memo to the
message
1. Press Menu > Messaging > Write New.
2. Select multimedia message.
6. To save press
@.
7. Press Options > Send to.
For details on recording voice memo, see page
60.
3. Write a message.
4. Press Options > Add Object > Add Sound.
5. Select Voice Memo > select a voice memo >
Adding saved video to the message
1. Press Menu > Messaging > Write New.
@
.
Messaging 39
5. Select Take a Video > focus on the object >
2. Select multimedia message.
3. Write a message.
@
.
6. To stop recording press
@.
4. Press Options > Add Object > Add Image.
5. To play press Options > Play.
6. Select Video Album > select a video >
Options > Select.
7. To preview with the text press Options >
Preview.
8. To stop press Pause.
7. To preview with the text press Options >
Preview.
8. To stop press Pause.
9. To go back to the message editor press Back.
10.Press Options > Send to.
For details on recording video, see page 49.
Adding other file to the message
1. Press Menu > Messaging > Write New.
2. Select Multimedia Message.
3. Write a message.
4. Press Options > Add Object.
5. Select Add Other files.
9. To go back to the message editor press Back.
10.Press Options > Send to.
Adding new video to the message
1. Press Menu > Messaging > Write New.
2. Select multimedia message.
3. Write a message.
4. Press Options > Add Object > Add Image.
6. Select the file > Options > Select.
7. Press Options > Send.
40
01
02
03
04
05
06
07
08
Setting sent message
Message template
1. Press Menu > Messaging > Settings.
2. [EZ] Press Save Messages.
[ADV] Press Common Settings > Save
Messages.
When you often use the same phrases, you can
save the message under template messages.
Adding to the existing template ADV
1. Press Menu > Messaging > Write New.
2. Select Multimedia Message.
3. Write a message.
4. Press Options > Add Template.
5. Select the template.
3. Select On or Off.
It will save all out going messages.
Setting deleting read message
1. Press Menu > Messaging > Settings.
2. [EZ] Press Auto Delete Read Message.
[ADV] Press Common Settings > Auto
Delete Read Message.
Message settings
3. Select On or Off.
Setting default editing mode
1. Press Menu > Messaging > Settings.
2. [EZ] Press Default Edit Mode.
[ADV] Press Common Settings > Default Edit
Mode.
Setting message center ADV
1. Press Menu > Messaging > Settings.
2. Press Text Massage > Message Center.
3. Enter new Message Center.
3. Select Alphabet or Predictive.
Messaging 41
Setting receiving method for push
message ADV
4. Press Select.
1. Press Menu > Messaging > Settings.
2. Press Push Message > Receive.
3. Select the method.
Setting e-mail gateway ADV
5. Press Menu > Messaging > Settings.
6. Press Text Massage > E-mail Gateway.
7. Enter new gateway for receiving e-mail.
8. Press Select.
note: When you receive push message the [
icon will displays.
]
Setting default save place ADV
1. Press Menu > Messaging > Settings.
2. Press Text Massage > Save to.
3. Select SIM or Phone.
Setting voice message
Setting receiving voice message ADV
1. Press Menu > Messaging > Settings.
2. Press Voice Mail.
ADV
Setting profiles for multimedia message
3. Enter the number of the voice mail center >
1. Press Menu > Messaging > Settings.
@
.
2. Select Multimedia Massage > WAP Profiles.
note: This number may be pre-configured by the
service provider upon activation.
3. Select a profile.
42
01
02
03
04
05
06
07
08
2. Select the IM application > Select.
Email
3. Enter logon and password > Sign On.
You can receive email from your service provider.
Viewing the conversation log
You can view the log of your conversations in the
Instant Messenger Saved History.
Receiving an email
1. [EZ] Press Options > Mobile Email or Menu >
Messaging > Mobile Email.
[ADV] Press Menu > Email & IM > Mobile
Email.
2. Select an email >
@.
Using instant messenger
Use Instant Messenger (IM) to send and receive
short, simple messages that are delivered
immediately.
Starting an instant messenger
1. [EZ] Press Options > IM or Menu >
Messaging > IM.
[ADV] Press Menu > Email & IM > IM.
Messaging 43
Breeze
C520
4
01
02
03
04
05
06
07
08
Getting started
Calls & address book
Messaging
Multimedia
Useful features
Connectivity
Settings
Appendix
Multimedia
Camera
Photo album
Video album
Other files
Managing the memory
Playing games
[ADV] Press
Q
in standby mode or press
Menu > My Stuff > Tools.
Press Menu > My Stuff > Tools.
2. Press Camera > Take a Photo.
3. Press Options to change settings prior to
taking a picture.
Camera
You can take pictures and record movies using the
built-in camera. The photos and video clips can be
saved and sent via multimedia message.
Size
Quality
In options menu for camera
White
balance
Icons Name
Take a Picture ADV
Description
Recording
Type
Duration
Self Timer
Multi-shot
Remain
View Photos ADV
Take a Video ADV
Recording
Zoom
Brightness
Brightness
176x220 ( ), 320x240 ( ),
Image Size ADV
Image Quality ADV
Effects
640x480 (
)
Low ( ), Medium ( ),
High (
)
Setting camera settings
1. [EZ] Press in standby mode or press
Menu > Tools.
Q
Nomal, Sepia, Monochrome,
Nagative, Embossing
46
01
02
03
04
05
06
07
08
note: Zoom tool is disabled when the picture size
set for 640x480.
Auto ( ), Sunlight ( ),
Cloudy ( ),
White Balance
Multi-shot
Fluorescent ( ),
In options menu for video camera
Incandescent (
)
Off, 4EA ( ), 6EA ( ),
9EA (
Icons Name
Description
)
Take a
Video
View
Videos
Take a
Photo
Self Timer
Display Icons
Shutter Sound
Off, 5Sec ( ), 10Sec (
On, Off
On, Off
)
Icons for camera
Icon
Name
Description
Video
Size
Image
Quality
Record
Type
128x96
Low
Unlimitied
(
)
, 176x144
, High
, For Msg
(
)
Remain Picture
(
)
(
)
x1, x2,
x3, x4
Zoom
(
)
(
)
-3, -2, -1
0
+1, +2, +3
Brightness
Nomal, Sepia, Monochrome,
Nagative, Embossing
Effects
Multimedia 47
Menu > My Stuff > Tools.
2. Press Camera > Take a Photo.
Display
Icons
On, Off
3. Focus on the object >
@
or press Options >
Take a Picture.
note: Your photo will be saved automatically to
My Stuff > Photo Album.
Icons for video camera
Icon
Name
Description
-3, -2, -1
0
+1, +2, +3
Changing to video camera mode
Brightness
1. [EZ] Press
Q
in standby mode or press
Menu > Tools > Camera > Take a Photo.
[ADV] Press in standby mode or press
Menu > My Stuff > Tools > Camera > Take a
Photo.
2. Press Options while camera mode is
activated.
Zoom in and out
1. Press U/D
Q
.
Increasing or decreasing the brightness
1. Press L/R
.
Taking a picture
1. [EZ] Press
3. Press Take a Video.
Q
in standby mode or press
4. Focus on the object >
@
or press Options >
Menu > Tools.
Take a Video.
[ADV] Press
Q
in standby mode or press
5. Press
@
to stop.
48
01
02
03
04
05
06
07
08
6. Press
@
to save.
Set as wallpaper Options > Set as > Wallpaper
Options > Set as > Address
Book
Viewing the taken picture
Set as address book
Press
Q
in standby mode or press Menu > My
Go back to
Stuff > Tools > Camera > Take a Photo.
Options > Back to Preview
preview ADV
2. Press Options > View Photos.
Rename ADV
Options > Rename
3. Select the picture >
@.
After taking pictures
Recording a video
1. [EZ] Press
Q
in standby mode or press
To Press
Menu > Tools > Camera > Take a Video.
[ADV] Press in standby mode or press
Send a multimedia Options > Send as Multimedia
message message
Q
Menu > My Stuff > Tools > Camera > Take a
View taken
Options > View Photos
picture ADV
Video.
2. Focus on the object >
@
or press Options >
Delete Options > Delete
Take a Video.
Send using
Options > Send via Bluetooth
Bluetooth ADV
3. Press
@
to stop.
4. Press Play to play the video clip.
5. Press Back to go back to preview mode.
Upload photos Options > Send to HP’s
on the web ADV Snapfish
Multimedia 49
2. Press Options > View Videos.
3. Select the video clip >
6. Press
@
to save.
@
.
Changing to camera mode
After recording video clips
1. [EZ] Press in standby mode or press
Menu > Tools > Camera > Take a Video.
[ADV] Press in standby mode or press
Q
To Press
Send a multimedia Options > Send as Multimedia
message message
Q
Menu > My Stuff > Tools > Camera > Take a
Video.
2. Press Options while video camera mode is
activated.
3. Press Take a Photo.
For details on taking a picture, see page 48.
View recorded
Options > View Videos
video clip ADV
Delete Options > Delete
Send using
Options > Send via Bluetooth
Bluetooth ADV
Go back
Options > Back to Preview
Options > Rename
to preview ADV
Viewing the recorded video clip
1. [EZ] Press
Q
in standby mode or press
Rename ADV
Menu > Tools > Camera > Take a Video.
[ADV] Press in standby mode or press
Menu > My Stuff > Camera > Take a Video.
Q
50
01
02
03
04
05
06
07
08
2. Select a picture >
@.
During recording a video
To Press
Setting as wallpaper in the display
1. Press in standby mode or press Menu >
Q
Receive an incoming call
Stop recording
S
@
My Stuff > Photo Album.
2. Select a picture > Options > Set as >
Wallpaper.
Save the clip
@
Uploading pictures on the web ADV
Photo album
1. Press
Q
in standby mode or press Menu >
You can view, send, save to your phone or an
external memory card and also delete photos.
JPEG format is supported, and other formats are
saved in the Graphics folder.
My Stuff > Photo Album.
2. Select a picture > Options > Send to HP’s
Snapfish.
note: To access Graphics, press Menu > My Stuff
> Graphics.
Deleting multiple pictures
1. Press
Q
in standby mode or press Menu >
My Stuff > Photo Album.
Viewing the saved pictures
2. Press Options > Multi-Select.
1. Press
My Stuff > Photo Album.
Q
in standby mode or press Menu >
3. Press
@
to select more than one picture.
4. Press Back to unselect.
Multimedia 51
Video album
5. Press Delete.
You can view, send, save to your phone and also
delete videos.
Sending pictures using multimedia
message
Playing the saved video clips
1. Press
Q
in standby mode or press Menu >
1. Press
My Stuff > Video Album.
2. Select a video clip >
Q
in standby mode or press Menu >
My Stuff > Photo Album.
2. Select a picture.
@
or press Options >
3. Press Options > Send as Multimedia
Message.
For details on creating a multimedia message,
see page 38.
Play.
Using video controls
To Press
Viewing file information ADV
Pause
@
1. Press
Q
in standby mode or press Menu >
Stop Stop
Rewind Hold
My Stuff > Photo Album.
2. Select a picture.
3. Press Options > File Info.
L
Fast forward Hold
R
52
01
02
03
04
05
06
07
08
3. Press Options > Send as Multimedia
Message.
For details on creating a multimedia message,
see page 38.
Mute Mute
Control volume Side key up or down
Deleting multiple video clips
1. Press
Q
in standby mode or press Menu >
Other files ADV
My Stuff > Video Album.
You can manage files in unsupported formats
saved on your phone. It also lists files received via
Bluetooth from other devices.
2. Press Options > Multi-Select.
3. Press
@
to select more than one video.
4. Press Back to unselect.
5. Press Delete.
Viewing the list of the files
1. Press Menu > My Stuff > Other Files.
Sending video clip using multimedia
message
1. Press
Q
in standby mode or press Menu >
Managing the memory
My Stuff > Video Album.
2. Select a video.
Viewing memory status ADV
1. Press Menu > My Stuff > Memory Info.
2. Use U/D to view the information.
Multimedia 53
Playing games
You can download games to play with. It is easy to
download and you can preview them beforehand.
You will only be able to view games that are
available on your mobile.
Previewing games
1. [EZ] Press Menu > My Stuff > Games &
Apps.
[ADV] Press Menu > Games & Apps.
2. Select a game >
@.
3. Play the demo and press BUY to download the
complete game.
54
01
02
03
04
05
06
07
08
Multimedia 55
Breeze
C520
5
01
02
03
04
05
06
07
08
Getting started
Calls & address book
Messaging
Multimedia
Useful features
Connectivity
Settings
Appendix
Useful features
Calendar
Alarm
Calculator, converter and stopwatch
Notepad and voice memo
Business card
Phone status
Move to another week
U
D
for Previous
for Next
Calendar
View other month Side key up for Previous
Calendar helps you manage your schedule including
your time for calls or special days. You can set a
reminder on any given date with this function.
Side key down for Next
Creating a new event and edit
1. Select a day > Options > New Event.
2. Input the events > Save.
note: You can create up to 50 scheduled events.
note: You can create events for dates from
Viewing calendar
1. [EZ] Press
C
in standby
mode or press Menu > Tools
> Calendar.
[ADV] Press
01/01/2000 to 12/31/2049.
C
in standby
mode or press Menu > My
Stuff > Tools > Calendar.
Alarm
note: Monthly view is displayed as default.
Setting an alarm
In the monthly view
1. [EZ] Press
R
to access alarm or press Menu
> Tools > Alarm.
To Press
[ADV] Press Menu > My Stuff > Tools >
Alarm.
Move to another day
L
R
for Previous
for Next
58
01
02
03
04
05
06
07
08
2. Press Options > New > edit a new alarm >
Save.
note: The alarm will not ring if you set the phone
to Vibrate Only or Silent. To make it ring on
vibrate mode, press Options > Wake-Up Call On.
The alarm will not go off if the phone is turned off.
3. Edit the alarm settings.
4. To delete an alarm > Options > Delete.
note: You cannot delete Simple Alarm.
Calculator, converter
and stopwatch
note: Only the first alarm will be Simple Alarm .
It will only ring once as default alarm tone.
Using the calculator
1. [EZ] Press Menu > Tools >
Calculator.
Viewing the saved alarms
1. [EZ] Press
> Tools > Alarm.
[ADV] Menu > My Stuff > Tools > Alarm.
R
to access alarm or press Menu
[ADV] Press Menu > My Stuff
> Tools > Calculator.
2. Use [L/R/U/D/@] to
calculate.
Editing existing alarms
1. [EZ] Press
> Tools > Alarm.
R
to access alarm or press Menu
3. Press
C
to clear.
4. Press [ . ] to use the decimal point.
[ADV] Menu > My Stuff > Tools > Alarm.
2. Select an alarm > Options > Select.
59
Useful features
Notepad and voice memo
Using the converter ADV
1. Press Menu > My Stuff
>Tools > Converter.
2. Select the categories
3. Select current unit and enter
figure.
Using notepad
1. [EZ] Press Menu >Tools > Notepad.
[ADV] Press Menu > My Stuff >Tools >
Notepad.
2. Press Options > Create New.
(Press New to create memo for the first time.)
3. To edit memo press Options > Edit.
4. Press Options > Save to save.
4. Select the unit to be changed.
Using stopwatch ADV
1. Press Menu > My Stuff >
Tools > Stopwatch.
Recording voice memo
1. [EZ] Press Menu > Tools >
Voice Memo.
2. Press
3. Press
@
@
to start.
to restart.
[ADV] Press Menu > My Stuff
> Tools > Voice Memo.
2. Press Options > Create New.
(Press New to create memo
for the first time.)
4. To record lap time, press Lap.
5. Press Reset to clear.
60
01
02
03
04
05
06
07
08
3. Press
@
to stop recording.
Business card ADV
You can send your information by sending it as
multimedia message.
4. Press Re-rec to re-record. Press Pause to
pause recording.
5. Press Play to listen.
6. Press
@
[
] to save.
Creating your own business card
1. Press Menu > Address Book > My Business
Card.
Listening the recorded sound
1. [EZ] Press Menu > Tools > Voice Memo.
[ADV] Press Menu > My Stuff > Tools >
Voice Memo.
2. Select a sound > Options > Select.
Using sound controls
2. Edit the fields > Options > Save or press
@.
Forwarding
1. Press Menu > Address Book > My Business
Card.
2. Press Options > Send via Bluetooth or Send
via Multimedia Message.
3. Write a message.
To Press
Pause
Stop
@
D
4. Press Options > Send.
Rewind
L
R
Fast forward
Control volume Side key up or down
61
Useful features
Updating information
1. Press Menu > Address Book > My Business
Card.
2. Press Options > Edit.
3. Update information.
4. Press Options > Save.
Phone status
You can view status of your phone for My Phone
Number, Signal Strength, Battery Remaining,
Sounds & Alerts, Alarm, and New Messages.
Viewing the status
1. [EZ] Press Menu > Phone Status.
[ADV] Press Menu > My Stuff > Tools >
Phone Status.
62
01
02
03
04
05
06
07
08
63
Useful features
Breeze
C520
6
01
02
03
04
05
06
07
08
Getting started
Calls & address book
Messaging
Multimedia
Useful features
Connectivity
Settings
Appendix
Connectivity
Bluetooth
Using the browser
Profiles setting
> Bluetooth > Bluetooth.
2. Select On or Off.
Bluetooth
Bluetooth technology enables free wireless
connections between electronic devices within a
maximum range of 33 feet (10 meters). Bluetooth
connection can be used to send images, text,
business cards, calendar notes, or to connect to
computers using Bluetooth technology.
Adding a device
1. [EZ] Press Options in standby mode >
Bluetooth > Paired Devices.
[ADV] Press Menu > Settings > Connectivity
> Bluetooth > Paired Devices.
2. Press New > Search All.
3. The available device will display.
4. To select the device press Option > Select.
5. Enter password.
Your mobile phone supports:
• Connect to PC to access internet.
• Connect to Hands-Free.
note: The other device must be in pairing mode.
• Connect to electronic devices.
Setting device for outgoing call
1. [EZ] Press Options in standby mode >
Bluetooth > Outgoing Call Device.
[ADV] Press Menu > Settings > Connectivity
> Bluetooth > Outgoing Call Device.
Activating
1. [EZ] Press Options in standby mode >
Bluetooth > Bluetooth.
[ADV] Press Menu > Settings > Connectivity
66
01
02
03
04
05
06
07
08
2. Select Headset, Always Ask or Phone.
Setting the visibility
1. [EZ] Press Options in standby mode >
Bluetooth > Visibility.
Sending an object
1. Select the file from Menu > My Stuff > Photo
Album, Video Album, Audio, Graphics or
Other Files.
[ADV] Press Menu > Connectivity >
Bluetooth > Visibility.
2. Select Hidden or Shown to All.
note: It will allow your phone to be visible to
other’s devices.
2. Press Options > Send via Bluetooth.
3. Select the device > Options > Select.
note: If the other Bluetooth device requests
pairing, the object is sent after pairing is
completed. Locked object or ones containing
original rights may not be forwarded.
Naming the phone
1. [EZ] Press Options in standby mode >
Bluetooth > Name.
[ADV] Menu > Connectivity > Bluetooth >
Name.
2. Enter the name > Options > Save.
note: This is what others will see in their device’s
display for your phone when searching for your
device.
Receiving an object
When you receive the object a pop-up message
will displayed if it is authorized. The file will be
saved to the appropriate folder. For example, if
you receive contacts information it will be saved in
your phone’s memory
Connectivity 67
3. To send via text message, press Send
Message.
Using the browser
Entering address
1. [EZ] Press
[ADV] Press Menu > MEdia Net > Go to URL.
2. Enter the web address >
Accessing browser
@
> Options > Go to URL.
1. [EZ] Press
[ADV] Press
@
@
in standby mode.
in standby mode or press
@.
Menu > MEdia Net > MEdia Net Home.
note: It will access provider’s homepage.
Setting profile ADV
1. Press Menu > MEdia Net > Profiles.
Setting new bookmarks ADV
1. Press Menu > MEdia Net > Bookmarks.
2. Press Options > Add.
2. Select Options.
Viewing certificates ADV
1. Press Menu > MEdia Net > Security >
Certificates.
3. Enter the web address >
@.
Viewing bookmarks
Setting the security warning ADV
1. Press Menu > MEdia Net > Security >
Warning.
1. [EZ] Press
@
> Options > Bookmarks.
[ADV] Press Menu > MEdia Net >
Bookmarks.
2. To open the site, press Select.
2. Select Off or On.
68
01
02
03
04
05
06
07
08
Deleting profile
1. Press Menu > MEdia Net > Profiles.
2. Select a profile > Options > Delete.
ADV
Profiles setting
You can set profile and view Profile Name, Home
URL, Connection Type, Proxy Address, Proxy
Port, Proxy Login ID, Proxy Password and Data
Bearer.
Viewing default profile
1. Press Menu > MEdia Net > Profiles.
2. Select MEdia Net Home > Options > View.
Editing profile
1. Press Menu > MEdia Net > Profiles.
2. Select other profile > Options > Edit.
Adding new profile
1. Press Menu > MEdia Net > Profiles.
2. Select Empty > Options > Add.
3. Enter the profile name > Options > Save.
Connectivity 69
Breeze
C520
7
01
02
03
04
05
06
07
08
Getting started
Calls & address book
Messaging
Multimedia
Useful features
Connectivity
Settings
SettAipnpegndsix
Language
Time and date
Ringtones
Decorating the display
Locks
To enable fixed dialing
Reset
TTY
Setting sound profile
1. Press Menu > Settings > Sounds & Alerts
2. Select Normal, Vibrate and Ring, Vibrate
Only, or Silent.
ADV
Language
Setting up
1. Press Menu > Settings > Phone > Language.
Decorating the display
ADV
Time and date
Setting the display
Setting up
1. [EZ] Press Menu > Settings.
[ADV] Press Menu > Settings > Display >
Main Screen.
2. Press Wallpaper > Graphic or Photo Album.
3. Select the file > Options > Set as.
1. Press Menu > Settings > Phone > Time &
Date.
2. Set each option > Save.
Ringtones
Setting the font ADV
1. Press Menu > Settings > Display > Font.
You can set the style and the size of the font
for your device.
Setting ringtones
1. Press Menu > My Stuff > Audio.
2. Select the ringtone > Options > Set as
Ringtone.
72
01
02
03
04
05
06
07
08
Entering greeting message ADV
Locks
1. Press Menu > Settings > Display > Greeting.
Locking the phone ADV
1. Press Menu > Settings > Security > Phone
Lock.
Setting the brightness ADV
1. Press Menu > Settings > Display >
Brightness.
2. Select On.
note: Modifying brightness may affect battery life.
note: The default password is ‘1234’. To change
the password press Menu > Settings > Security >
Change Password.
Setting time for backlight
1. [EZ] Press Menu > Settings > Backlight
Timer.
[ADV] Press Menu > Settings > Display >
Backlight Timer.
note: Modifying backlight time may affect battery
life.
Locking the PIN ADV
The Personal Identification Number is the security
code that protects the phone or SIM against
unauthorized use.
1. Press Menu > Settings > Security > PIN1
Check.
2. Select On.
Settings 73
Reset
3. Enter PIN code >
@.
note: To change the PIN code press Menu >
Resetting the phone ADV
Settings > Security > Change PIN1.
1. Press Menu > Settings > Reset > Master
Reset.
note: It will return configuration settings to
default. The default password is ‘1234’.
Changing PIN 2 ADV
1. Press Menu > Settings > Security > Change
PIN2.
Clearing the phone ADV
To enable fixed dialing
1. Press Menu > Settings > Reset > Master
Clear.
Enabling ADV
note: It will change the setting as default and erase
all personal data. The default password is ‘1234’.
Press Menu > Settings > Security > Fixed
Dialing.
For fixed dialing, see page 30.
74
01
02
03
04
05
06
07
08
•
TTY Hear: User who can hear but cannot
talk send a text message and receive voice
message.
TTY
The teletypewriter (TTY) is a telecommunications
device that allows people who are deaf or hard
of hearing, or who have speech or language
disabilities, to communicate via a telephone.
Setting teletypewriter ADV
1. Press Menu > Settings > TTY.
2. Select Disabled, TTY Full, TTY Talk, or TTY
Hear.
•
•
Disabled: TTY mode is disabled.
TTY Full: User who cannot talk and hear send
and receive a text message.
•
TTY Talk: User who can talk but cannot
receive a text message and send voice
message.
Settings 75
Breeze
C520
8
01
02
03
04
05
06
07
08
Getting started
Calls & address book
Messaging
Multimedia
Useful features
Connectivity
Settings
Appendix
Appendix
Alert message
Troubleshooting checklist
Safety information
Safety precautions
About the battery usage
Hearing aid compatibility with mobile phones
FCC Regulatory Compliance
Warranty
“Multimedia Message Full. Move To Inbox?” You can
move to inbox or delete the message.
Alert message
When the “Password” message appears in Phone
locked state:
Enter the phone password. The default password is
“1234”. If you cannot remember the password, contact
the nearest carrier.
If you experience any problem while using your mobile
phone, please refer to the following checklist. If the
problem still persists, contact your service provider.
When the “Insert SIM Card” message appears:
Make sure the SIM card is correctly installed. Check
to see if the SIM card is working properly. If it does not
work, try to clean the contact points of the card with
a dry cloth. If it is out of order, take it to your service
provider.
When the “Enter PIN1” message appears:
Input PIN1. If you cannot remember it, contact your
service provider. You can still receive calls even if
your mobile phone becomes locked after entering the
incorrect PIN1 on three consecutive attempts.
When the “Text Message Full” message appears:
The received or saved messages are full in your phone
or SIM memory. You need to delete the message.
When the “No Service” or “Network Search”
appears:
If you cannot make/receive a call when you are indoors
or undergrounds where the signal strength is poor,
move toward a window or go out to an open area. If you
still cannot make a connection, contact your service
provider.
When the “Multimedia Message Full” message
appears:
The saved messages are full in your phone memory.
When you receive new message you will see
78
01
02
03
04
05
06
07
08
When you are unable to make a call:
Your phone may be set to “fixed dial.” Cancel the “fixed
dial” function.
Troubleshooting checklist
When audio quality is poor:
End a call and try again.
When you are unable to charge the battery:
This may be the result of one of the following three
cases.
1. Your charger may be out of order. Contact your
nearest dealer.
2. You may be attempting to use the phone in an overly
hot/cold temperature. Try changing the charging
environment.
3. Your battery may have not been connected to the
charger properly. Check the connector.
When the other party cannot hear you speaking:
Your phone may be set to MUTE. Disable the MUTE
function. Or your hand may be covering the microphone
located below the
*
key.
When battery lifetime is shorter than usual:
This may happen when you are in an area with low
signal strength. Turn off your phone when it is not in use.
Change the battery when battery energy is exhausted.
When your mobile phone does not turn on:
Make sure your battery is charged. Check to see if your
phone works while recharging the battery.
When you are unable to input data into your
Address Book:
Your Address Book memory may be full. Try deleting
some entries from your Address Book.
When you are unable to send a message:
Either you are not registered to receive an SMS service,
or you may be in an area where your network service
provider cannot provide such a service.
When you are unable to select a certain function:
You may not have subscribed to that function, or your
Appendix 79
– Do not use chemical products, cleaning solvents or
detergents to clean your mobile phone.
– If your mobile phone does not work properly, contact
your dealer immediately.
– Use only authorized batteries, battery chargers and
accessories. Any malfunction or damage caused by
the use of unauthorized batteries, battery chargers
and accessories will void the limited product warranty.
– Ensure that the battery and battery charger do not
come in contact with conductive objects.
network service provider may be in an area where such
service cannot be provided. Contact your local service
provider.
Safety information
The following list shows how to maintain your mobile
phone, together with precautions to take.
– Keep your mobile phone and its accessories out of the
reach of children.
Safety precautions
– Maintain your mobile phone in dry conditions and keep
it within normal operating temperatures. Temperatures
higher than 55°C (131°F) or lower than -20°C (-4°F)
may damage your phone.
– Do not use or store your mobile phone in dusty, dirty
areas.
– Do not attempt to disassemble your mobile phone.
– Do not drop or cause severe impact to your mobile
phone.
Using a mobile phone while driving may be
prohibited.
Please check local laws and regulations with regard to
the prohibition of mobile phone use while driving, and
comply with them.
Use of your phone while you are driving may disturb
your concentration and may lead to an accident. Always
switch your phone off to drive safely.
80
01
02
03
04
05
06
07
08
Should you use your phone in an emergency, either use
a hands free device built into your car or pull over in a
safe place first.
waves emitted by your phone may affect the electronic
navigation equipment in the aircraft.
Switch off in hospitals and near medical
equipment
Switch off in restricted areas
Always switch your phone off in areas where mobile
phone use is restricted.
Always switch your phone off in hospitals, and obey the
regulations or rules of the hospital.Switch your phone off
when using medical equipment for private purposes, if
possible. Always consult with the medical equipment’s
manufacturer or an expert regarding phone use near the
medical equipment.
Switch off in explosive or dangerous areas
Always switch your phone off in areas with explosive
or dangerous materials (such as fuels, fuel stations
or areas containing chemical goods) and obey any
instructions or signals. Do not remove your mobile
phone’s battery in such areas.
Installing a hands free device in your vehicle
Install vehicle hands free devices away from the steering
wheel and airbag expansion area, otherwise injury may
result.
Switch off in aircraft ADV
When you are in an aircraft, always switch your phone
off or select Flight Mode On (press the Menu > Settings
> Phone > Flight mode in Advanced Mode. In Breeze
Mode you need to assign to options. Press Options in
main screen. Select one of the Unassigned > Options >
Edit. Press Settings > Flight Mode). The electromagnetic
Mobile phones and other electronic devices
Mobile phones emit electromagnetic waves that may
affect nearby electronic devices. When it is switched
on, do not place your phone close to delicate electronic
equipment.
Appendix 81
– Dispose of and recycle used batteries in accordance
with local regulations. Do not dispose of batteries by
burning; they may explode.
About the battery
– Do not use an unauthorized charger.
usage
–
Only use the battery for the device for which it is specified
Your phone is powered by a Lithium Ion (Li-Ion)
battery. This means that, unlike other forms of battery
technology, you can recharge your battery while
some charge remains without reducing your phone’s
autonomy due to the “battery memory effect” inherent in
those technologies.
– Only use the battery with a charging device that has
been qualified with the device per this standard. Use
of an unqualified battery or charger may present a risk
of fire, explosion, leakage, or other hazard.
– Do not short circuit a battery or allow metallic
conductive objects to contact battery terminals.
– Replace the battery only with another battery that
has been qualified with the device per this standard,
IEEE-Std-1725-2006. Use of an unqualified battery
may present a risk of fire, explosion, leakage or other
hazard.
– Do not use a damaged battery or charger.
– Do not disassemble or open crush, bend or deform,
puncture or shred.
– Do not modify or remanufacture, attempt to insert
foreign objects into the battery, immerse or expose
to water or other liquids, expose to fire, explosion or
other hazard.
– Promptly dispose of used batteries in accordance with
local regulations.
– Battery usage by children should be supervised.
– Avoid dropping the phone or battery. If the phone or
battery is dropped, especially on a hard surface, and
– Do not put your battery into contact with conductive
objects.
82
01
02
03
04
05
06
07
08
the user suspects damage, take it to a service center
for inspection.
– Use your battery for the specified purpose only.
– The closer you are to your network’s base station, the
longer your phone usage time because less battery
power is consumed for the connection.
– The battery recharging time varies depending on
the remaining battery capacity and the battery and
charger type you use.
– Battery life inevitably shortens over time.
– Use an authorized battery and charger only.
– Since overcharging may shorten battery life, remove
the phone from its charger once it is fully charged.
Unplug the charger, once charging is complete.
Leaving the battery in hot or cold places, especially
inside a car in summer or winter, may reduce the
capacity and life of the battery. Always keep the
battery within normal temperatures.
Hearing aid compatibility
with mobile phones
When some mobile phones are used near some hearing
devices (hearing aids and cochlear implants), users may
detect a buzzing, humming, or whining noise. Some
hearing devices are more immune than others to this
interference noise, and phones also vary in the amount
of interference they generate.
The wireless telephone industry has developed ratings
for some of their mobile phones, to assist hearing device
users in finding phones that may be compatible with
their hearing devices. Not all phones have been rated.
Phones that are rated have the rating on their box or a
label on the box.
The ratings are not guarantees. Results will vary
depending on the user’s hearing device and hearing
loss. If your hearing device happens to be vulnerable to
interference, you may not be able to use a rated phone
successfully. Trying out the phone with your hearing
– To prevent injury or burns, ensure that no metal
objects come into contact with the + and – terminals
of the battery.
Appendix 83
FCC regulatory compliance
device is the best way to evaluate it for your personal
needs.
FCC Regulatory Compliance
M-Ratings: Phones rated M3 or M4 meet FCC
requirements and are likely to generate less interference
to hearing devices than phones that are not labeled. M4
is the better/higher of the two ratings.
T-Ratings: Phones rated T3 or T4 meet FCC
requirements and are likely to be more usable with
a hearing device’s telecoil (“T Switch” or “Telephone
Switch”) than unrated phones. T4 is the better/higher of
the two ratings. (Note that not all hearing devices have
telecoils in them.)
Hearing devices may also be measured for immunity
to this type of interference. Your hearing device
manufacturer or hearing health professional may help
you find results for your hearing device. The more
immune your hearing aid is, the less likely you are to
experience interference noise from mobile phones.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Your mobile device is a low power radio transmitter
and receiver. When it is ON, it receives and also sends
out radio frequency (RF) signals. In August 1996, the
Federal Communications Commission (FCC) adopted
RF exposure guidelines with safety levels for mobile
devices. Those guidelines are consistent with safety
standards previously set by both U.S. and international
standards bodies: American National Standard Institute
(ANSI), National Council of Radiation Protection and
Measurements (NCRP), and International Commission
on Non-Ionizing Radiation Protection (ICNRP). Those
84
01
02
03
04
05
06
07
08
standards were based on comprehensive and periodic
evaluations of the relevant scientific literature. The
design of your phone complies with the FCC guidelines
and applicable.
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Statement according to FCC part 15.105
Statement according to FCC part 15.21
Modifications not expressly approved by this company
could void the user’s authority to operate the equipment.
note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation. This
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by turn-
ing the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
RF exposure FCC
For body worn operation, to maintain compliance with
FCC RF exposure guidelines, use only accessories
that contain no metallic components and provide a
separation distance of 15mm (0.6 inches) to the body.
Use of other accessories may violate FCC RF exposure
guidelines and should be avoided.
This device and its antenna must not be co-located
or operating in conjunction with any other antenna or
transmitter.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
Appendix 85
additional protection for the public and to account for
any variations in.
Health and Safety Information FCC
This EUT has been shown to be capable of compliance
for localized specific absorption rate (SAR) for
uncontrolled environment/general population exposure
limits specified in ANSI/IEEE Std. C95.1-1992 and
had been tested in accordance with the measurement
procedures specified in FCC/OET Bulletin 65
Supplement C (2001) and IEEE Std. 1528-2003 Ministry
of Health (Canada), Safety Code 6. The standards
include a substantial safety margin designed to assure
the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC
is 1.6W/kg *.
** This device contains 1800 MHz GSM functions that
are not operational in U.S. Territories; this filing is
applicable only for 850 MHz GSM and 1900 MHz
PCS operations.
Warranty
Protect Your Warranty
Read your Warranty carefully, with the special
consideration to paragraph seven of the Limited
Warranty for your unit.
“Warranty does not apply to... or to any product or
part thereof which has suffered through alteration...
mishandling, misuse, neglect or accident”.
Many companies are making look alike accessories and
in some cases, promoting that their product is equal to
or better than the Pantech product. Be careful. Some of
these products may not be compatible to use with your
* In the U.S. and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg)
averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give
86
01
02
03
04
05
06
07
08
Pantech product and may damage the unit or cause it to
malfunction. If service is required on your unit and it is
determined that a non-Pantech accessory has created
the problem with your unit, the Warranty will not apply.
In addition, if the unit has already suffered irreversible
damage by reason of a non-compatible accessory, the
Warranty will be voided. To protect your Warranty, use
only compatible accessories which cannot damage or
interfere with the functioning of your Pantech product.
The antenna, key pad, display, rechargeable battery and
battery charger, if included, are similarly warranted for
twelve (12) months from date of purchase.
This Warranty extends only to consumers who purchase
the product in the United States or Canada and it is not
transferable or assignable.
This Warranty does not apply to:
(a) Product subjected to abnormal use or conditions,
accident, mishandling, neglect, unauthorized
alteration, misuse, improper installation or repair or
improper storage;
(b) Product whose mechanical serial number or
electronic serial number has been removed, altered
or defaced.
(c) Damage from exposure to moisture, humidity,
excessive temperatures or extreme environmental
conditions;
(d) Damage resulting from connection to, or use of
any accessory or other product not approved or
authorized by the Company;
12 Month Limited Warranty
Pantech Wireless, Inc. (the Company) warrants to
the original retail purchaser of this Pantech handheld
portable cellular telephone, that should this product
or any part thereof during normal consumer usage
and conditions, be proven defective in material or
workmanship that results in product failure within the first
twelve (12) months period from the date of purchase,
such defect(s) will be repaired or replaced (with new or
rebuilt parts) at the Company’s option, without charge
for parts or labor directly related to the defect(s).
Appendix 87
In addition, you may telephone us at (800) 962-8622, or
email us at [email protected]
(e) Defects in appearance, cosmetic, decorative or
structural items such as framing and non-operative
parts;
(f) Product damaged from external causes such as
fire, flooding, dirt, sand, weather conditions, battery
leakage, blown fuse, theft or improper usage of any
electrical source.
THE EXTENT OF THE COMPANY’S LIABILITY UNDER
THIS WARRANTY IS LIMITED TO THE REPAIR OR
REPLACEMENT PROVIDED ABOVE AND, IN NO
EVENT, SHALL THE COMPANY’S LIABILITY EXCEED
THE PURCHASE PRICE PAID BY PURCHASER FOR
THE PRODUCT.
The Company disclaims liability for removal or
reinstallation of the product, for geographic coverage,
for inadequate signal reception by the antenna or for
communications range or operation of the cellular
system as a whole.
To obtain repairs or replacement within the terms of
this Warranty, the product should be delivered with
proof of Warranty coverage (e.g. dated bill of sale), the
consumer’s return address, daytime phone number and/
or fax number and complete description of the problem,
transportation prepaid, to the Company by calling the
number listed below or to the place of purchase for
repair or replacement processing.
ANY IMPLIED WARRANTIES, INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, SHALL
BE LIMITED TO THE DURATION OF THIS WRITTEN
WARRANTY. ANY ACTION FOR BREACH OF
ANY WARRANTY MUST BE BROUGHT WITHIN A
PERIOD OF 18 MONTHS FROM DATE OF ORIGINAL
PURCHASE. IN NO CASE SHALL THE COMPANY
BE LIABLE FOR ANY SPECIAL CONSEQUENTIAL
OR INCIDENTAL DAMAGES FOR BREACH OF
THIS OR ANY OTHER WARRANTY, EXPRESS OR
IMPLIED, WHATSOEVER. THE COMPANY SHALL
NOT BE LIABLE FOR THE DELAY IN RENDERING
88
01
02
03
04
05
06
07
08
SERVICE UNDER THIS WARRANTY OR LOSS OF
USE DURING THE TIME THE PRODUCT IS BEING
REPAIRED OR REPLACED.
No person or representative is authorized to assume
for the Company any liability other than expressed
herein in connection with the sale of this product. Some
states or provinces do not allow limitations on how long
an implied warranty lasts or the exclusion or limitation
of incidental or consequential damage so the above
limitation or exclusions may not apply to you. This
Warranty gives you specific legal rights, and you may
also have other rights which vary from state to state or
province to province.
PANTECH WIRELESS, INC.
11240 Warland Drive, Cypress, CA 90630
(800) 962-8622
Appendix 89
90
91
Memo
92
93
Memo
94
|