DVR 410
Digital Video Camera
User’s Manual
© 2009 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.
Introduction
Thank you for purchasing the DVR 410 Digital Video Camera. With this camera you can shoot quality Videos
(AVI) and Photos (JPG).
This camera requires an SD card (up to 16GB) for normal use. You will not be able to capture videos and
photos without the SD card inserted.
Please read this manual carefully before using.
Key Features
Digital Video resolution - 640x480pixels (VGA), 320x240pixels (QVGA).
Digital Photo resolution - 1280 x 1024 pixels (1.3M), 640x480pixels (VGA)
1.8‟‟ LCD screen
4 X Digital Zoom
Built-in microphone and speaker
NTSC TV out function
SD memory card up to 16GB is needed in order to capture videos and photos
Vivitar Experience Image Manager software for uploading and managing photos and videos to or from
the most popular photo sharing and social network websites
2
Camera Maintenance and Care
Do not wrap the camera in cloth or other materials when operating the camera. Doing so will raise
the internal temperature and cause overheating hazards.
Do not attempt to disassemble or alter any part of the equipment not expressly described in this
manual.
Avoid using and storing your camera in extremely hot and cold places, as well as humid and dusty
environments.
Protect the equipment from strong shocks and impacts.
Be careful to prevent metal objects or others from contact with any plug/slot of the device.
Do not try to use the camera during driving.
When not using the camera for extended periods of time, remove the batteries from the camera.
What your Camera Includes
Digital Video Camera
TV cable
Strap
Built-in USB connector
Vivitar Experience Image Manager software Installation CD
User`s Manual
3
Computer System Requirement for Windows XP
To be able to download photos and videos to your PC, you will need the following minimum configuration:
Pentium 4 processor or above with Windows XP service pack 2
512 MB RAM, with 100MB of free disk space
1024 x 768 Recommended screen resolution
16-bit color or higher display adaptor
CD-ROM Drive
QuickTime 6 or higher
Microsoft Internet Explorer 7 or higher
Windows Media Player 10 or higher
Internet connection
Computer System Requirement for Windows Vista
To be able to download photos and videos to your PC you will need the following minimum configuration:
Windows Vista
800MHz processor and 512 MB of system memory
20GB hard drive with at least 15GB of available space
Support for Super VGA graphics
Available USB Interface
CD-ROM drive
QuickTime 6 or higher
Microsoft Internet Explorer 7 or higher
Internet connection
4
6
Prepare Your Digital Video Camera for Use
Battery Installation
Your Digital Video Camera requires 3 AAA batteries (alkaline batteries are recommended).
Insert the batteries into your Digital Video Camera as directed below:
1. Slide the battery cover on the front of the camera in a downward direction to open the cover.
2. Insert the batteries with the correct polarity (positive pole/negative pole) as appears in the battery
compartment.
3. Replace and slide the battery cover up to close.
Note:
1. Do not mix old and new batteries.
2. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium metal hydride) batteries.
3. If the camera locks or freezes and does not respond to any button, remove and reinstall the batteries.
7
Insert SD/MMC Memory Card
Important: A compatible SD/MMC memory card up to 16GB needs to be inserted into the SD card slot on the
side of the camera in order to capture videos and photos. After you insert the memory card, all the videos and
photos you shoot will automatically be stored on the memory card.
(SD cards are not included and need to be purchased separately).
Note: Power off the camera before inserting or removing the memory card.
Please follow these steps to insert the memory card:
1. Locate the memory card slot on the side of your Digital Video Camera.
2. Insert the memory card correctly as directed on the side of the camera at the opening of the slot.
3. Press the memory card until you hear a “Click” sound. The memory card when properly inserted will be
flush with the surface of your camera.
Note: After you insert the memory card, the card icon will appear on the LCD, indicating that your memory card
has been installed successfully, and the videos and photos you shoot will be stored on the card.
8
Starting Your Digital Video Camera
Power on
Press the Power button on the side of the camera to power on the camera.
The LCD will light up and the Video mode will appear by default indicating that you camera is ready to use to
capture videos.
If you have not inserted a compatible SD memory card, a “NO CARD” message will appear in the center of the
LCD screen. Please insert an SD card in order to continue using the camera.
Power off
Press the Power button to power off your camera.
Auto Power off
Your camera will automatically power off if idle for 60 seconds or if there is insufficient battery power.
Change Camera Mode
Press the Mode button to change between the 3 camera options - Video, Camera and Playback.
The icon of the selected mode will appear on the LCD.
9
Function Buttons on the camera
Button
Power
Function
Button
Function
Power on/off camera
Up and Down Go to previous or the next
button
photos/videos when in playback mode.
In the Menu mode to select the
submenu option.
Menu
Open
menus
of Right and left Zoom in and out in the camera mode
Camera mode, Video button
mode and Playback
mode
and of the photos in playback mode.
OK/Shutter Take Photo/ Start or Mode
stop to record video
clips. Play and pause
videos in Playback
mode
Shift between Camera, Video and
Playback modes.
10
Video Mode
Shooting Videos
1. Turn on your Digital Video Camera.
2. The first mode to appear is the Video mode.
3. The amount of recording time available for the resolution selected will appear on the LCD screen.
4. Compose your object with the LCD screen.
5. Press the OK/Shutter button to start shooting your video. The built-in microphone enables you to
record your video with sound.
6. The elapsed time will begin to appear on the bottom right corner of the LCD screen.
7. Press the OK/Shutter button again to stop shooting and save your video as an AVI video file on the
memory card.
8. The amount of time that you can capture videos depends on the size of the SD memory card
inserted and the video resolution selected.
Note: The lower the resolution setting the more recording time is available. However videos
recorded at lower resolution are of less quality than videos recorded at the higher quality.
Changing the Video settings
1. Press the Menu button in the Video mode.
2. The “AVI Option” menu will appear on the LCD with the following options:
EXIT, RESOLUTION, FREQUENCY, SPEAKER and LANGUAGE
11
Resolution settings
Your Digital Video Camera supports 2 video resolutions – VGA and QVGA.
1. Press the Menu button in the Video mode.
2. Press the Up or Down button to select the RESOLUTION option
3. Press the OK/Shutter button to open the submenu options.
VGA (640x480), QVGA (320x240)
4. Press the Up or Down button to select the option you wish to choose.
5. Press the OK button to confirm and save the resolution.
Note: Videos captured in VGA are of a better quality than QVGA videos and therefore take up more of the
camera`s memory.
Frequency setting
Generally speaking, 60HZ is for the countries such as U.S. and 50HZ for countries such as Japan.
The default setting is 60HZ. Select the frequency setting that best suits your present location
1. Press the Menu button in the Video mode.
2. Press the Up or Down button to select the FREQUENCY option
3. Press the OK/Shutter button to open the submenu options.
50 Hz, 60 Hz
4. Press the Up or Down button to select the option you wish to choose.
5. Press the OK button to confirm and save the frequency.
12
Speaker setting
You can choose to turn the camera`s speaker on or off.
1. Press the Menu button in the Video mode.
2. Press the Up or Down button to select the SPEAKER option.
3. Press the OK/Shutter button to open the submenu options.
ON, OFF
4. Press the Up or Down button to select the option you wish to choose.
5. Press the OK button to confirm and save the speaker status on or off.
Language
You can select the language in which the camera menus will display.
1. Press the Menu button in the Video mode.
2. Press the Up or Down button to select the LANGUAGE option
3. Press the OK/Shutter button to open the language submenu options.
English, French, Portuguese, Spanish, German and Italian
4. Press the Up or Down button to select the option you wish to choose.
5. Press the OK button to confirm and save the language selected.
6. All the camera messages and menus will not be displayed in the language selected.
13
Camera Mode
Taking Photos:
1. Turn on your digital video camera.
2. Press the Mode button to select and enter the Camera mode.
3. The camera icon will appear on the LCD.
4. The amount of photos that can be captured with the available memory and as per the selected
resolution will appear on the bottom right corner of the LCD screen.
5. Compose your object with the LCD screen.
6. Press the Right button to Zoom in and the Left button to Zoom out of the object.
7. Press the OK/Shutter button to capture and save your photo to the memory card.
Note: The lower the resolution setting the more photos can be taken. However lower resolution
photos are of less quality than photos taken at higher quality.
Changing the Camera settings
1. Press the Menu button in the Camera mode.
2. The “DSC Option” menu will appear on the LCD with the following options:
EXIT, CAPTURE, RESOLUTION, FREQUENCY, SPEAKER and LANGUAGE
14
Capture settings
Your Digital Video Camera has 3 photo capture options.
Select the SINGLE option to capture single shots,
CONT option to take 3 continuous shots, and
SELF option to set the camera to the 10 second self-timer option to include yourself in the photo. In
all instances, clicking the Shutter button will capture the photo(s).
1. Press the Menu button in the Camera mode.
2. Press the Up or Down button to select the CAPTURE option
3. Press the OK/Shutter button to open the submenu options.
SINGLE, CONT or SELF
4. Press the Up or Down button to select the option you wish to choose.
5. Press the OK button to confirm and save the capture setting.
6. Press the Shutter button to capture the photo(s).
Resolution settings
Your Digital Video Camera supports 2 camera resolutions – 1.3M and VGA.
1. Press the Menu button in the Camera mode.
15
2. Press the Up or Down button to select the RESOLUTION option
3. Press the OK/Shutter button to open the submenu options.
1.3M, VGA
4. Press the Up or Down button to select the option you wish to choose.
5. Press the OK button to confirm and save the resolution.
Note: Photos taken in 1.3M (1280 x 1024) are of a better quality than VGA (640 x 480) photos and therefore
take up more of the memory on the SD memory card.
Frequency setting
Generally speaking, 60HZ is for the countries such as U.S. and 50HZ for countries such as Japan.
The default setting is 60HZ. Select the frequency setting that best suits your present location
1. Press the Menu button in the Camera mode.
2. Press the Up or Down button to select the FREQUENCY option
3. Press the OK/Shutter button to open the submenu options.
50 Hz, 60 Hz
4. Press the Up or Down button to select the option you wish to choose.
5. Press the OK button to confirm and save the frequency.
16
Speaker setting
You can choose to turn the camera`s speaker on or off
1. Press the Menu button in the Camera mode.
2. Press the Up or Down button to select the SPEAKER option.
3. Press the OK/Shutter button to open the submenu options.
ON, OFF
4. Press the Up or Down button to select the option you wish to choose.
5. Press the OK button to confirm and save the speaker status on or off.
Language
You can select the language in which the camera menus will display.
1. Press the Menu button in the Video mode.
2. Press the Up or Down button to select the LANGUAGE option
3. Press the OK/Shutter button to open the language submenu options.
English, French, Portuguese, Spanish, German and Italian
4. Press the Up or Down button to select the option you wish to choose.
5. Press the OK button to confirm and save the language selected.
6. All the camera messages and menus will not be displayed in the language selected.
17
Playback Mode
In this mode you can view, playback, delete and/or format the images that you captured with your camera with
the SD memory card inserted.
1. Press the Mode button to set the camera to the Playback mode.
2. The last picture taken or video captured will appear on the LCD screen.
3. In this mode, you can view all the photos and play the video files taken with the camera and saved to
the memory card.
Note: if there are no photos or videos on the SD Card once inserted in the camera a “NO FILE” message will
appear on the LCD screen on entering this mode.
View Photos
If the
icon and the letters JPG appear on top left of the screen, this means you are viewing a picture.
1. Press the Up button to view the previous file.
2. Press the Down button to view the next file.
3. Press the Right button to zoom into the selected photo.
4. Press the Left button to zoom back out of the selected photo.
18
Playback Videos
If the icon
and the letters AVI appear together on the top left of the screen, this means you are viewing
the image of a video file.
1. Press on the OK/Shutter button to playback the current video file with sound.
2. Press the OK/Shutter button again to pause the video.
3. Press the Up key to view the previous file.
4. Press the Down key to view the next file.
Delete or Format
You can delete unwanted files or format the SD memory card inserted in the camera from the Playback mode.
1. In the Playback mode, search and select the AVI video or JPEG photo file you wish to delete by pressing
the Up or Down buttons.
2. Press the Menu button.
3. The DELETE MENU will appear with 4 options:
EXIT – select Exit to close the menu
FORMAT - Format the SD memory card inserted in your camera
DELETE ALL- delete all files from the SD memory card in your camera.
DELETE ONE - delete the current file you selected.
.
4. Press the Up/Down button to select your choice.
5. Press the OK/Shutter button.
19
6. A Confirmation screen will appear with ‟Yes‟ or „No‟ options.
7. Press the Up/Down button to select the option to wish to perform.
8. Select „Yes‟, to either delete the photo(s) or format the card. Select „No‟ to cancel without deleting.
9. Press the OK/Shutter button to execute the command.
Note:
The Format option will delete all data on your SD memory card. Videos or Photos that you have not
downloaded to your computer will be erased forever. Please be sure of your choice before using this
function.
TV out function
Your Digital Video Camera supports an NTSC TV out function.
This function can only be used on TV sets that support NTSC format.
You can use the TV screen instead of your Digital Video LCD Screen to view your videos or photos.
20
Please follow the below steps:
1. Power on your Digital Video Camera.
2. Turn on your TV.
3. Ensure that your TV is set to NTSC mode.
4. Connect your Digital Video Camera to the TV with the special TV cable supplied.
5. Connect the White cable to the Audio slot and the Yellow cable to the Video slot.
6. The LCD screen of your Digital Video Camera will now turn off and the image will now appear on the
TV screen.
7. To see a video being captured in real time on your TV, point the camera at the object and begin to
record as described in the Shooting Videos section above.
8. The image being recorded appears on your TV screen (instead of the camera`s LCD)
9. You can also use the TV screen instead of your camera screen to playback and view your videos and
photos.
Note: Ensure your Digital Video Camera has sufficient battery power before using this function.
The LCD screen of your Digital Video Camera will be turned off (blank) after you connect it to the TV.
21
Install the Vivitar Experience Image Manager Software
Warning: Do not plug your camera into the computer until the software installation is complete.
1. Insert the installation CD into your CD-ROM drive. The Vivitar Experience Image Manager will begin
to install.
2. Please review the license terms.
On PC and Macintosh: Click the “I accept the terms of this license agreement” and then click “Next”
to continue.
3. On PC only: Let the “Vivitar Experience Image Manager” installer create the folder to where the
program will be installed, and then click “Install”.
4. Please wait while the application continues the installation process on your computer.
5. Follow all instructions.
6. On PC: Click the “Close” button when the installation is complete.
On Macintosh: Click the “Quit” button when the installation is complete.
The application automatically opens.
7. If you closed the application, click on the Vivitar Experience Image Manager desktop icon (PC) or
from the Programs or Applications menu on your computer to open and run the application.
22
Connect your Camera to the Computer
1. Push the built-in USB connector out to connect your camera to the USB port of your computer.
2. Turn the camera on.
3. The first time you connect the device to the computer you will have to wait a few seconds until the
computer recognizes the device.
4. As your camera is a mass storage device “MSDC” will appear on the LCD, indicating that your
camera is in Mass Storage Mode.
Get photos and videos from your camera to your computer
An SD/MMC card needs to be inserted into the camera. Do not disconnect the camera during file transfer.
Doing so will cancel the transfer of any files on their way to your computer.
1. Select the “Get Images” button from the Home window.
23
2. The “Get media from device” window opens.
3. You can select to download photos, videos or both.
4. Select your camera (removable disk) from the device window. If your camera is the only USB device
connected then it will be selected automatically.
5. Select a location on the computer where to place the new photo and video files.
24
6. Add the new photo and video files to albums if desired.
7. Select to remove the media files from the selected device (removable disk) after the import.
8. Click the “Get media” button to transfer the photos and videos from your camcorder to your
computer.
A media download progress bar appears on the bottom left showing the number of media files
downloading to your computer. A message appears when the download is complete.
9. The photo and video files that you selected are now downloaded to your computer to the selected
folder and albums ready for your use.
Get started!
Using the Vivitar Experience Image Manager you can:
Organize your images by creating offline and online albums.
When connected to the internet you can upload and manage photos and videos to and from the
most popular photo sharing and social networking sites - Facebook, Flickr, MySpace, Picasa
YouTube and Photobucket.
Seamlessly transfer photos and videos from one social network to another.
Edit images using automatic and manual tools.
Use automatic “Geotagging” with built in Google Maps.
For more details on how to use the Vivitar Experience Image Manager open the Help file or click
the “Take the Tour” button on the application`s Home page.
25
Transfer media from my camera to my computer manually (Using Windows)
1. Use the USB built-in connector on your camera to connect your camera to the USB port on your
computer.
2. “MSDC” will appear on the LCD, indicating that your camera is in Mass Storage Mode.
3. A window appears with a list of options, select Open folder to view files and click OK.
4. Open the DCIM folder and the folder inside to view the media files.
5. Select the media and copy the files from this folder into your computer. Optionally, select the files
and choose Copy from the Edit menu. Then select a folder and choose Paste from the Edit menu.
6. We recommend that you copy the images into the Pictures/My Pictures folder and the videos into
the Videos/My Videos folder.
7. Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on their way
to your computer.
Transfer media from my camera to my computer manually (Using Macintosh)
1. Use the USB built-in connector on your camera to connect your camera to the USB port on your
computer.
2. “MSDC” will appear on the LCD, indicating that your camera is in Mass Storage Mode.
3. The camera‟s device icon appears on the desktop.
4. Click on the device icon and open the DCIM folder and the folder inside to view the media files.
5. Select the files and drag them into your computer. Optionally, select the files and choose Copy from
26
the Finder‟s Edit menu. Then select a folder and choose Paste from the Edit menu.
6. We recommend that you copy the images into the Pictures folder and the videos into the Movies
folder.
7. Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on their way
to your computer.
Note: After you connect your camera to your computer, the camera will remain on all the while it is plugged
into the USB and it won‟t be switched off. On disconnecting the USB connector the camera will automatically
switch off.
Sakar Warranty Card
This warranty covers for the original consumer purchaser only and is not transferable. Products that fail to
function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be
repaired at no charge for parts or labor for a period of one year.
What Is Not Covered By Warranty:
Damages or malfunctions not resulting from defects in material or workmanship and damages or
malfunctions from other than normal use, including but limited to, repair by unauthorized parties, tampering,
modification or accident.
27
What To Do When Service Is Required:
When returning your defective product (postage pre-paid) for service, your package should include:
1. Copy of original bill of sale
2. A detailed written description of the problem.
3. Your return address and telephone number (Daytime)
MAIL TO ADDRESS BELOW:
In the US:
In the UK:
Sakar International
Attention: Service Department
195 Carter Drive
Sakar / Vivitar
2D, Siskin Parkway East
4020 Middlemarch Business Park
Coventry, CV3 4PE
Edison, NJ 08817
Technical Support
For technical support issues please visit our website at www.vivitar.com. You can find manuals, software and
FAQ‟s at the website. Can‟t find what you are looking for? E-mail us at [email protected] and one of our
technical support team members will answer your questions. For phone support in the US please call
1-800-592-9541, in the UK call 0800 917 4831. If you would like to call from anywhere else, please visit
www.vivitar.com for your local toll free number.
28
Technical Specifications
Product type
Digital Video Camera
Digital Video resolution
Digital Photo resolution
Image Sensor
640*480 pixels ( 30fps) / 320*240 pixels( 30fps )
1280*1024 pixels / 640*480 pixels
CMOS Sensor
LCD Display
1.8” TFT
Color
24 bit RGB
Shutter Speed
1/8 sec to 1/5000 sec
Internal memory
None
SD/MMC card (up to 16GB) needs to be inserted to
External memory
use the camera
F=2.4 f=3.0mm,
50Hz / 60 Hz
10 seconds
4 x
Lens
Frequency
Self Timer
Digital Zoom
White Balance / Exposure
Speaker
Auto
Built-in
File Format
TV out
AVI and JPEG
NTSC
29
Power saving
60 seconds
Battery
3 AAA batteries (1.5V)
Transmission interface
Working temperature
Computer system
USB 1.1
0~40℃
Window XP/Vista/Mac OS X (10.4.6 or higher)
Troubleshooting
The Camera does not Power on.
1. The Batteries are inserted in the wrong direction.
★Reload the batteries in the correct direction.
2. The Batteries have insufficient power to power on.
★Replace the batteries.
The camera does not take pictures.
1. The Memory is full.
★Download the images to your computer and
then delete all the images on the SD Card.
★Insert a new memory card.
2. The Memory card is not formatted correctly.
★Format the memory card again or use a new
card.
30
Image is blurry or out of focus.
1. The camera was moving when the image was
captured.
★Hold the camera steady when shooting.
Images were deleted by mistake. Can I retrieve them
1. Images were deleted by mistake and have
★ All deleted images can be found and retrieved
been removed from where they were located on from the Recycle or Trash Bin.
the computer.
Recorded images are not saved in memory.
1. The camera was turned off before the images
were saved to memory.
★If the battery low indicator appears on the LCD
monitor, replace the batteries immediately.
A00-091016GES
31
|