Uniden BT110 User Manual

BT110 Bluetooth®  
Headset  
What the LED colors mean  
QUICKSTART  
GUIDE  
Charge the battery.  
1. Plug the power adapter  
into the top of the  
headset.  
Color  
State  
Meaning  
The headset is currently charging.  
When the battery is fully charged, the  
LED turns off.  
Steady  
Red  
Flashing  
Flashing  
The battery is low.  
The headset is turned on.  
Slow flash  
(every 3  
2. Charge battery for 8  
hours or until the red LED  
turns off.  
Blue  
The headset is paired to a Bluetooth  
device.  
seconds)  
The headset is in Pairing mode (refer  
to Pair the headset to your Bluetooth  
phone).  
Red &  
blue  
Alternating  
flash  
Pair the headset.  
1. Power off the headset.  
2. Press and hold Power until  
the LED flashes red and  
blue.  
3. Search for Bluetooth  
headsets or handsfree  
devices from your phone.  
Setting Up Your Headset  
Charge the battery  
Before using your headset, charge the battery for at least  
8 hours. Charging the battery completely (and keeping it  
charged) will help you get the longest possible talk and  
standby time out of the battery.  
USER’S  
GUIDE  
4. If prompted for a PIN/  
Also in this package:  
password, enter 0000.  
2 extra ear cushions  
Use ONLY the power adapter supplied with the headset! Using any  
other adapter could damage your headset, create a fire hazard, or  
cause a risk of electric shock.  
Use your headset.  
To answer a call - press Power.  
To hang up - press Power.  
AC (indoor)  
Connect the adapter to the power connector on the top of  
the headset, then plug it into a standard 120 volt AC (regular  
indoor) power outlet.  
power adapter  
To make a call - make the  
call from your mobile phone;  
your phone should send  
the call to the headset. If it  
doesn’t, press Power on the  
headset.  
Questions? Problems?  
Get help on the web at  
Pair the headset to your Bluetooth phone  
Pairing is like “introducingtwo Bluetooth devices and giving  
them permission to connect to each other. If you want to use  
the headset with more than one phone, you need to pair it  
with each phone separately. Once a phone and the headset  
are paired, they can connect automatically whenever they  
detect each other.  
or call our Customer Service line at  
800-292-2294.  
1. Make sure the headset is powered off and the power  
adapter is not connected (you can’t use the headset while  
it’s charging).  
2. Press and hold Power until the LED flashes alternating red  
and blue. The headset is in pairing mode and should be  
visible to other Bluetooth devices.  
3. On your phone, start a search for Bluetooth headsets or  
handsfree devices. (This process may take several seconds,  
and it will be different for each phone; see your phone’s  
manual for detailed instructions.)  
Getting to Know the Headset  
CAUTION! Using the headset at high volume can cause  
permanent hearing loss. To reduce the risk of hearing  
damage, use the minimum volume level necessary (see  
Avoid Hearing Damage section).  
Power  
button  
Power  
connecter  
4. Your phone should discover a device called a BT110.  
When your phone asks if you want to pair with this device,  
answer yes.  
LED  
Ear  
Ear hook  
cushion  
Speake  
Volume  
Down  
button  
5. If your phone prompts you for a PIN code or password to  
pair with the BT110, enter 0000.  
6. When the headset is paired, the LED turns blue and flashes  
every 2 seconds. Your phone might display a confirmation  
message, also.  
Volume Up  
button  
Microphone  
7. Your phone might ask if you want to change the headset’s  
name; generally, you should only change the name if you  
have more than one BT110 headset that you use with this  
phone.  
What the buttons do  
Release the button to activate the function.  
Press and hold it for two  
seconds to  
In standby: Turn the headset on  
or off.  
During an incoming call: Reject  
the call.  
Button  
Power  
Press it to  
Connecting to your phone  
Most phones connect to the headset as soon as you pair it; if  
yours won’t, turn the headset off and back on. If the headset  
still won’t connect, check your phone’s owner’s manual for  
additional Bluetooth information.  
Once the headset is paired:  
Whenever you turn the headset on, it will automatically try  
to connect to whatever device it was connected to last.  
During an incoming  
call: Answers call.  
During a call: Hangs up.  
During a call: Increase  
the call volume.  
Volume Up  
NA  
During a call: Decrease Redial the most recently dialed  
the call volume. number.  
Volume Down  
If the headset loses the connection (e.g., if your phone is  
out of range), it reconnects automatically. To manually  
reconnect, press Power.  
If the headset goes more than 1 hour with no connection,  
it automatically turns off.  
criteria. For body worn operation, the FCC RF exposure guidelines were also met  
when used with the Uniden accessories supplied or designed for this product. Use  
of other accessories may not ensure compliance with FCC RF exposure guidelines  
and should be avoided.  
Safety and Handling Information  
For maximum product life, do not drop, throw, or crush the  
headset. Do not expose it to humidity, dust, or temperatures  
above 125˚ F.  
Industry Canada Statement  
Cleaning the headset  
This device complies with RSS-210 of the Industry Canada Rules. Operation is  
subject to the following two conditions: (1) This device may not cause harmful  
interference, and (2) this device must accept any interference received, including  
interference that may cause undesired operation.  
If necessary, remove the ear cushion and earhook.  
Dampen a lint-free cloth with water or a cleaner  
specifically designed for electronics, and gently wipe the  
headset clean.  
Do not expose this product to liquid (water, alcohol, etc.)  
or submerse in liquid for any reason.  
IMPORTANT NOTE: Radiation Exposure Statement  
This equipment complies with IC radiation exposure limits set forth for an  
uncontrolled environment. End users must follow the specific operating  
instructions for satisfying RF exposure compliance. To maintain compliance with  
IC RF exposure compliance requirements, please follow operation instruction as  
documented in this manual.  
Avoiding hearing damage  
Using any headset or earbud at too high a volume can cause  
permanent hearing damage. To reduce the risk of hearing  
damage:  
Set the volume at the minimum level needed to hear in  
the current environment. If possible, use your headset  
in quiet surroundings or try to move to an area with less  
background noise before adjusting the volume.  
Start with the volume at its lowest setting, then gradually  
increase it until you can hear.  
Turn the volume down before powering off the headset  
and readjust the volume each time you turn it on.  
If someone next to you can hear the other end of the call  
through your headset or if your ears hurt or ring when you  
hang up, the volume is too high.  
The longer your ears are exposed to noise, the greater  
the risk of damage. Limit calls at higher volumes (or other  
exposure to loud noise).  
For more information on protecting your hearing, visit the  
consult an audiologist.  
Lithium-polymer battery information  
This device contains a lithium-polymer battery. The headset and battery must be  
recycled or disposed of properly. Contact your local waste management office for  
information on battery recycling or disposal.  
Two-Year Limited Warranty  
Important: Evidence of original purchase is required for warranty service.  
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)  
ELEMENTS OF WARRANTY: Uniden warrants, for two years, to the original retail  
owner, this Uniden Product to be free from defects in materials and craftsmanship  
with only the limitations or exclusions set out below.  
WARRANTY DURATION: This warranty to the original user shall terminate and be  
of no further effect 24 months after the date of original retail sale. The warranty is  
invalid if the Product is a) damaged or not maintained as reasonable or necessary,  
b) modified, altered, or used as part of any conversion kits, subassemblies, or  
any configurations not sold by Uniden, c) improperly installed, d) serviced or  
repaired by someone other than an authorized Uniden service center for a defect or  
malfunction covered by this warranty, e) used in any conjunction with equipment  
or parts or as part of any system not manufactured by Uniden, or f) installed or  
programmed by anyone other than as detailed by the owner’s manual for this  
product.  
STATEMENT OF REMEDY: In the event that the product does not conform to this  
warranty at any time while this warranty is in effect, warrantor will either, at its  
option, repair or replace the defective unit and return it to you without charge  
for parts, service, or any other cost (except shipping and handling) incurred  
by warrantor or its representatives in connection with the performance of this  
warranty. Warrantor, at its option, may replace the unit with a new or refurbished  
unit.  
THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY  
PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER  
WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR  
ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED  
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR  
PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow  
this exclusion or limitation of incidental or consequential damages so the above  
limitation or exclusion may not apply to you.  
Important Safety Instructions  
Uniden America Corporation DOES NOT represent this product to be  
waterproof. To reduce the risk of fire, electrical shock, or damage to  
the product, DO NOT expose this product to rain or moisture.  
When using the headset, always follow basic safety  
precautions to reduce the risk of fire, electric shock and injury  
to persons, including the following:  
Do not use this product near water, for example, near a  
bath tub, wash bowl, kitchen sink or laundry tub, in a wet  
basement or near a swimming pool.  
Use only the power cord and batteries indicated in this  
manual. Do not expose the battery (or the device) to  
flames or dispose of it in a fire: the battery may explode.  
Check with local authorities for possible battery disposal  
instructions.  
Do not disassemble, modify, or attempt to repair any  
component of this product.  
LEGAL REMEDIES: This warranty gives you specific legal rights, and you may also  
have other rights which vary from state to state. This warranty is void outside the  
United States of America and Canada.  
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the  
instructions in the owner’s manual you are certain that the Product is defective,  
pack the Product carefully (preferably in its original packaging). The Product should  
include all parts and accessories originally packaged with the Product. Include  
evidence of original purchase and a note describing the defect that has caused you  
to return it. The Product should be shipped freight prepaid, by traceable means, to  
warrantor at:  
Check the laws and regulations on the use of mobile  
phones and hands-free equipment in the areas where you  
drive. Always give full attention to driving and pull off the  
road and park before making or answering a call if driving  
conditions require.  
Do not allow children to play with your headset since it  
contains small parts that could become detached and  
create a choking hazard.  
Turn off your headset when pumping gas, handling  
flammable materials, or in any area with a risk of explosion.  
In rare occurrences, this product could generate sparks  
which can cause an explosion or fire. Follow all warning  
notices in your immediate area!  
Uniden America Service  
4700 Amon Carter Blvd.  
Fort Worth, TX 76155  
SAVE THESE INSTRUCTIONS!  
FCC Notice  
This device complies with part 15 of the FCC rules. Operation is subject to the  
following two conditions: (1) This device may not cause harmful interference, and  
(2) This device must accept any interference received, including interference that  
may cause undesired operation. Privacy of communications may not be ensured  
when using this product.  
To insure the safety of users, the FCC has established criteria for the amount of  
radio frequency energy various products may produce depending on their intended  
usage. This product has been tested and found to comply with the FCC’s exposure  

Weider Cash Register XE A101 User Manual
Tiffen Digital Pro SLR Kit User Manual
Technicolor Thomson 5400LDK User Manual
Stiga ST1200 User Manual
Sony SVR HDT500 User Manual
Sony CDX C910RDS User Manual
Sharp XE A22S Cash Register TINSZ2601RCZZ User Manual
Sanyo ECD 780 User Manual
Samsung VP DC161WB(i) User Manual
Samsung DuoCam SC D6550 User Manual