User Manual
5 SPEED BLENDER
MODEL
6092, 6094
P.N. 123244
• When blending hot liquids, remove filler cap from lid. Do not fill blender container
beyond 3-cup level. Always begin processing at the lowest speed setting. Keep
hands and other exposed skin away from the cover opening to prevent possible
burns. Jar will become hot from hot contents.
• If the jar should turn during operation, the blade assembly is loose. Switch OFF
immediately and tighten blade assembly.
• Do not leave blender unattended while it is operating.
• To disconnect cord, turn the control to “0” (zero), then remove the plug from wall outlet.
• If glass jar is chipped or cracked, do not use. It could break during operation.
• Do not use appliance for other than intended purpose.
special instructions
• This appliance intended for household use only. Use for food or liquids only.
• This appliance is equipped with a polarized plug. This type of plug has one prong
that is wider than the other. The plug will fit in a polarized outlet only one way. This is
a safety feature intended to help reduce the risk of electrical shock. If you are unable
to insert the plug into the outlet, reverse the plug. If it the plug should still fail to fit,
contact a qualified electrician to replace the obsolete outlet. Do not attempt to defeat
this safety purpose of the polarized plug by modifying the plug in any way.
• The length of the cord used on this appliance was selected to reduce the hazards of
becoming tangled in, or tripping over a long cord. If a longer cord is necessary an
approved extension cord may be used. The electrical rating of the extension cord
must be equal to or greater than the electrical rating of the blender (500 watts).
Care must be taken to arrange the extension cord so that it will not drape over
the countertop or tabletop where it can be pulled on by children or accidentally
tripped over.
• If the blender blades lock and do not move, it will damage the motor. Do not use.
Call the toll-free customer service number for information.
• Do not place blender in the freezer filled with food or liquid. This will freeze and
damage the blade assembly, jar and motor.
saVe tHese instructions
ꢁ
WELCOME
Congratulations on your purchase of a SUNBEAM® Blender! Sunbeam has designed your
blender to provide the utmost in quality, ease of use and convenience. Sunbeam offers you a
blender to fit your lifestyle.
Date product received:
Service number: US: 1 800 458-8407
Canada: 1 800 667 8623
TABLE OF CONTENTS
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Learning About your Blender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
How to Assemble and Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5 Speed Rotary Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
For Controlled Cycle Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Pulse Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Hints for Best Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Maintaining Your Blender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Customer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
One-Year Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
How to Obtain Warranty Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
ꢂ
LEArNiNg ABOuT yOur BLENdEr
1.
2.
3.
4.
5.
6.
7.
8.
9.
Filler-Cap
Lid
Glass Jar (48 ounces)
Blade Assembly (also called cutting blades)
Base
Control Panel
Speed Window
Rotary Control Dial
Pulse Button
2
1
3
4
5
6
C
ups
6
5
48 oz.
40
4
32
3
24
16
8
2
7
8
1
9
5
5
PULSE
PULSE
ꢃ
yOur BLENdEr
After unpacking the blender, wash everything except the blender base in warm, soapy
water. Dry thoroughly. Do not place in dishwasher. Wipe the blender base with a damp
cloth or sponge. Do not immerse the base in water. Care should be taken when handling
the blades, as they are very sharp.
How to assemble and use
important: Your blender jar and cutting blades are subject to wear during normal
use. Always inspect cutting blades for broken, cracked or loose blades. If jar or cutting
blades are damaged, do not use. Call our toll-free customer service number to obtain
replacement parts.
• Make sure blender is unplugged. Place blender base on
clean, dry surface to keep foreign particles from being
pulled up into motor during operation.
• Before inserting blade assembly, be sure that the gasket is
seated around blade base.
• In order to insert blade assembly, tilt it slightly and enter
with the blade that curves up. Move as needed to clear the
Figure 1
remaining blades. To remove, just reverse the process;
lower slightly and in the direction of the blade. Tilt up and
the other blades will clear the jar bottom opening.
• Attach collar onto jar by screwing it clockwise onto jar
until secure.
• Plug cord into outlet.
• Put ingredients in jar, place lid with filler cap in place
on jar making sure it is pushed down completely into
position.
Figure 2
• Process food or beverages. Place hand on lid when blending liquids. Push desired
button on control panel to start blender.
• Always turn blender OFF (turn rotary control dial to “0”) and wait until blades have
stopped rotating before removing jar or lid.
• Never place jar onto unit while motor is running.
• Never run empty.
• Never run without jar.
ꢄ
5 SPEEd rOTAry CONTrOL
Your blender has 5 speeds for maximum control. This blender has been designed to
gently process foods when operating on low speeds. If blades do not rotate during
operation, simply choose a higher speed. Use high speeds to Blend, Liquefy or Crush
Ice. To operate your 5 Speed blender, turn the rotary control dial clockwise from “0” to
“1” for the lowest blender setting. To increase speeds continue to turn the dial clockwise
for speeds 2-5. To stop blending return the rotary control dial to “0”. To turn blender OFF,
turn the rotary control dial to “0”. For the lowest Pulse Setting push the “Pulse” button
while the blender is set at “0”. DO NOT PUT HANDS IN JAR WHILE UNIT IS ON. DO NOT
TOUCH BLADES WHILE UNIT IS ON.
FOr CONTrOLLEd CyCLE OPErATiON
Rest one hand on top of blender jar with lid securely in place.
Press “Pulse” button and hold down for about 2 seconds.
Release “Pulse” button and allow blades to coast to a stop.
Repeat cycles until contents reach desired consistency.
Release of the “Pulse” button turns blender off. Note: “Pulse”
button can be held longer than 2 seconds as needed.
PuLSE BuTTON
5
For instant control, the pulse function operates only as long
as the button is held down. The blender motor stops when the
button is released.
PULSE
PULSE
ꢅ
hiNTS FOr BEST uSE
• Processing hot foods or liquids in the blender may cause hot liquid to spurt out when
the cover is removed. Always remove the filler-cap from the cover before blending hot
foods or liquids. Do not exceed 3 cups capacity when blending hot foods or liquids.
Jar will become hot from hot contents. (Please review Important Safeguards section).
• To add foods while the blender is operating remove filler-cap from container cover
and add ingredients through the opening.
• If blending action stops during blending or ingredients stick to the sides of the
jar, turn blender OFF. Remove the cover and use a rubber spatula to push mixture
towards blades.
• If using your blender to make salsa or other recipes using tomatoes, onions and
other vegetables, you may have better results using a slower speed function or the
pulse function.
• Do not try to mash potatoes, mix stiff dough, whip egg whites, grind corn, raw meat,
or extract juices from fruits and vegetables. The blender is not made to
perform these tasks
• Do not store food or liquids in the blender jar.
• Avoid bumping or dropping the blender.
ꢆ
MAiNTAiNiNg yOur 5 SPEEd BLENdEr
hOW TO CLEAN ThE BLENdEr
• Unplug the blender from electrical outlet.
• Wipe blender base, control panel, and cord with a damp cloth or sponge. To remove
stubborn spots, use a mild, non-abrasive cleanser.
• To clean jar, unscrew the blade assembly from jar, keeping jar tilted. Lower blade
assembly in the direction of the blade. Tilt up and the other blades will clear the jar
bottom opening.
• Carefully remove gasket from outer rim of blade assembly.
• Carefully wash blade assembly, gasket, jar and cover in warm, soapy water. Rinse
and dry thoroughly. Do not soak. Do not wash blade assembly, gasket, or cover
in a dishwasher.
• Replace gasket onto blade assembly and re-insert blade assembly into glass jar.
Do so by tilting it slightly and entering jar with the blade that curves up. Move as
needed to clear the remaining blades.
CuSTOMEr SErViCE
If you have a question about your blender, call our toll-free customer service number in
the US:1-800-458-8407 and in Canada:1-800-667-8623. Before calling, please note the
model, type, and serial numbers. These numbers can be found on the bottom of your
blender. This information will help us answer your question much more quickly.
ꢇ
1-yEAr LiMiTEd WArrANTy
Sunbeam Products, Inc., doing business as Jarden Consumer Solutions, or if in Canada, Sunbeam Corporation
(Canada) Limited, doing business as Jarden Consumer Solutions, (collectively “JCS”) warrants that for a period
of one year from the date of purchase, this product will be free from defects in material and workmanship. JCS,
at its option, will repair or replace this product or any component of the product found to be defective during the
warranty period. Replacement will be made with a new or remanufactured product or component. If the product
is no longer available, replacement may be made with a similar product of equal or greater value. This is your
exclusive warranty from JCS.
This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable.
Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. JCS dealers, service
centers, or retail stores selling JCS products do not have the right to alter, modify or any way change the terms
and conditions of this warranty.
This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or
misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly,
repair or alteration by anyone other than JCS or an authorized JCS service center. Further, the warranty does not
cover: Acts of God, such as fire, flood, hurricanes and tornadoes.
WhAT ArE ThE LiMiTS ON JCS’S LiABiLiTy?
JCS shall not be liable for any incidental or consequential damages caused by the breach of any express,
implied or statutory warranty or condition. Except to the extent prohibited by applicable law, any implied
warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration
of the above warranty.
JCS disclaims all other warranties, or conditions or representations, express, implied, statutory or otherwise.
JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability
to use the product including incidental, special, consequential or similar damages or loss of profits, or for
damages arising from any tort, including negligence or gross negligence, or fault committed by JCS, its agents
or employees or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser
by any other party.
Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential
damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not
apply to you.
This warranty gives you specific legal rights, and you may also have other rights that vary from province to
province, state to state or jurisdiction to jurisdiction.
hOW TO OBTAiN WArrANTy SErViCE
In the U.S.A.
If you have any question regarding this warranty or would like to obtain warranty service, please call
1-800-458-8407 and a convenient service center address will be provided to you.
In Canada
If you have any question regarding this warranty or would like to obtain warranty service, please call
1-800-667-8623 and a convenient service center address will be provided to you.
In the U.S.A., this warranty is offered by Sunbeam Products, Inc., doing business as
Jarden Consumer Solutions, located in Boca Raton, Florida 33431.
In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited, doing business as
Jarden Consumer Solutions, located at 20B Hereford Street, Brampton, Ontario L6Y 0M1
PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES
OR TO THE PLACE OF PURCHASE.
10
NOTES
11
©2007 Sunbeam Products Inc. doing business as Jarden Consumer Solutions.
All rights reserved. Distributed by Sunbeam Products Inc. doing business as Jarden Consumer
Solutions, Boca Raton, Florida 33431.
The product you buy may differ slightly from the one shown on this carton due to continuous product
development. One Year Limited Warranty – see inside for details.
Imported and distributed by Sunbeam Corporation (Canada) Limited doing business as
Jarden Consumer Solutions, 20B Hereford Street, Brampton, Ontario L6Y 0M1.
YMI061307
Printed in China
P.N. 123244
|