ENGLISH
Video Camcorder
8mm
COLOR LCD
SCL700/L710/L750/L770
SCL700/L710/L750/L770
Hi
ELECTRONICS
US
Owner’s Instruction Book
Before operating the unit, please read
this instruction book thoroughly, and retain it for
future reference.
ENGLISH
Contents (continued )
Program AE (Automatic Exposure) ................................................................................................................................................42
DSE (Digital Special Effects) in CAMERA mode ...........................................................................................................................44
Setting and Recording DATE/TIME................................................................................................................................................46
Selecting and Recording a Title .....................................................................................................................................................48
Fade In and Out .............................................................................................................................................................................50
PIP (SCL750/L770 only).................................................................................................................................................................51
Snap Shot (SCL750/L770 only) .....................................................................................................................................................52
White Balance ................................................................................................................................................................................53
Demonstration ................................................................................................................................................................................54
Setting the Date/Title color.............................................................................................................................................................55
Lighting Techniques........................................................................................................................................................................56
Playing back a Tape
To watch with LCD ........................................................................................................................................................................57
To watch with TV monitor...............................................................................................................................................................57
Various Functions in PLAYER mode..............................................................................................................................................59
Adjusting the LCD ..........................................................................................................................................................................60
Setting the Speaker ON/OFF.........................................................................................................................................................60
DSE in PLAYER mode ...................................................................................................................................................................60
Multi Playback (Using the PAL60 System).....................................................................................................................................61
USB interface (SCL770 only)...........................................................................................................................................62
Installing USB Media 2.0 Program.................................................................................................................................................63
Maintenance
Cleaning and Taking care of the Camcorder..................................................................................................................................66
■ Cleaning the Viewfinder ......................................................................................................................................................66
■ Cleaning the LCD Panel ......................................................................................................................................................66
■ Cleaning the Video Heads ..................................................................................................................................................66
■ Storing the Camcorder.........................................................................................................................................................66
Using Your Camcorder Abroad......................................................................................................................................67
Troubleshooting
Self Diagnosis Display ..................................................................................................................................................................68
Checking.........................................................................................................................................................................................69
Moisture Condensation ..................................................................................................................................................................71
Specifications ............................................................................................................................................................................72
Index...............................................................................................................................................................................................73
Warranty......................................................................................................................................................................................75
3
ENGLISH
Notices a nd Sa fety Instructions
Notices regarding rotation of LCD screen
Please rotate the LCD screen carefully as illustrated.
Unintended rotation may cause damage to the inside of the
hinge that connects the LCD screen to the Camcorder.
1)
2)
1) LCD screen closed.
➔
➔
➔
2) Standard recording by using the LCD screen.
90°
3)
3) Making a recording by looking at the LCD screen from the top.
90°
4)
5)
4) Making a recording by looking at the LCD screen from the front.
5) Making a recording with the LCD screen closed.
90°
➔
90°
Notices regarding the LENS
✤
Do not let the LENS point toward the sun.
Direct sunlight can damage the CCD
(Charge Coupled Device).
4
ENGLISH
Notices a nd Sa fety Instructions
Notices regarding electronic viewfinder
1) Do not place the camcorder so that the
viewfinder is pointing towards the sun.
Direct sunlight can damage the inside of the
viewfinder. Be careful when placing the
camcorder under sunlight or by a window.
2) Do not pick up the camcorder by the viewfinder.
3) Unintended rotation may cause damage to the
viewfinder.
2
3
1
Notices regarding moisture condensation
1) A sudden rise in atmospheric temperature may cause condensation to
form inside the camcorder.
for example:
■
When you take the camcorder from cold temperature outside to
warm temperature inside during the winter.
■
When you take the camcorder from cool temperature inside to
hot temperature outside during the summer.
2) If the “DEW” protection feature is activated, leave the camcorder in a
dry, warm room with the cassette compartment opened and the battery
removed.
3) If the “DEW” protection feature is activated unexpectedly,
and you want to override it, detach, then reinstall the battery pack
and lithium battery.
DEW
Please make sure that the condensation has disappeared
completely. (see page 71)
5
ENGLISH
Notices a nd Sa fety Instructions
Notices regarding the battery pack
✤
✤
✤
Make sure that the battery pack is charged before recording outdoors.
To preserve battery power, keep your camcorder turned off when you are not operating it.
When your camcorder is in CAMERA mode, if it is left in STANDBY for more than 5 minutes without operation,
it will automatically turn off to protect against unexpected battery discharge.
It is a good idea to use the viewfinder instead of the LCD when recording for a long time because the LCD uses
more battery power.
Make sure that the battery pack is fitted firmly into place.
Dropping the battery pack might damage it.
When the battery reaches the end of its life, please contact your local dealer.
The batteries have to be dealt with as chemical waste.
✤
✤
✤
Notices regarding the Lithium battery
Warning: Keep the LITHIUM BATTERY out of the reach of children. Should the battery be swallowed,
consult a doctor immediately.
✤
The lithium battery maintains the clock function, TITLE, CUSTOM function and preset contents memory;
even if the battery pack or AC power adapter is removed.
✤
✤
The lithium battery for the camcorder lasts about 8~10 months under normal operation from time of installation.
When the lithium battery becomes weak or dead, the date/time indicator flashes about 5 seconds when
you set the power switch to CAMERA. In this case, replace the lithium battery with type CR2025. (see page 21)
* When the lithium battery
becomes weak or dead please
contact your local dealer. The
batteries have to be dealt with
as chemical waste.
WARNING:
LITHIUM BATTERY MUST BE
RECYCLED OR DISPOSED
OF PROPERLY.
6
ENGLISH
Notices a nd Sa fety Instructions
Notices with Recording or Playback by using LCD
1) The LCD monitor is manufactured by using high precision technology.
However, there may be some tiny specks (red, blue or green in color)
that appear on the LCD monitor. These specks are normal and do not
affect the recorded picture in any way.
2) When using the LCD monitor outdoors in direct sunlight,
it may be difficult to view. If this occurs, use the viewfinder.
3) The LCD monitor's OSD is turned off when the LCD is placed in the
forward direction.
Notices regarding the hand strap
✤
It is very important to adjust the hand strap for better recording.
(see page 20)
✤
Do not insert your hand in the hand strap forcibly,
the buckle may be damaged.
Notices regarding video head cleaning
✤
To ensure normal recording and clear picture, clean the video heads. When playing back the pictures,
if they are noisy or hardly visible, the video heads may be dirty. If this happens, clean the video heads with a dry
type cassette cleaner.
✤
Do not use a wet type cassette cleaner. It may damage the video heads. (see page 66)
5 minutes off timer in STANDBY mode
✤
To protect against tape and head-drum wear, your camcorder will automatically turn off if it is left in STANDBY
mode without operation for more than 5 minutes.
7
ENGLISH
Notices a nd Sa fety Instructions
Safety Instructions
This symbol is intended to alert the user to the presence of uninsulated
dangerous voltage within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of fire or electric shock.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER(OR
BACK). NO USER SERVICEABLE PARTS
INSIDE, REFER SERVICING TO
This symbol is intended to alert the user to the presence of important
operating and maintenance instructions in the literature accompanying
this product.
QUALIFIED SERVICE PERSONNEL.
To prevent electric shock, match wide
blade of plug to wide slot and fully
insert.
1. READ INSTRUCTIONS:
7. WATER AND MOISTURE:
All the safety and operating instructions should be read
before the CAMCORDER is operated.
Do not use this CAMCORDER near water;
for example, near a bathtub, wash bowl, kitchen sink, laundry
tub, in a wet basement, near a swimming pool or lake.
2. RETAIN INSTRUCTIONS:
The safety and operating instructions should be retained
for future reference.
8. ACCESSORIES:
Do not place this CAMCORDER on an unstable cart, stand,
tripod, bracket or table.
3. HEED WARNINGS:
All warnings on the CAMCORDER and in the operating
instructions should be adhered to.
The CAMCORDER may fall, causing serious injury to a child
or adult, and serious damage to the unit.
Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with the
CAMCORDER. Any mounting of the unit should follow the
manufacturer’s instructions and should use a mounting
accessory recommended by the manufacturer.
4. FOLLOW INSTRUCTIONS:
All operating and maintenance instructions should
be followed.
5. CLEANING:
Unplug this CAMCORDER from the wall outlet before
cleaning. Do not use liquid or aerosol cleaners.
Use a dry cloth used for dusting cabinets.
A. An appliance and cart combination
should be moved with care.
Quick stops, excessive force and uneven surfaces may
cause the appliance and cart combination to overturn.
PORTABLE CART WARNING
6. ATTACHMENTS:
Do not use attachments not recommended by the
CAMCORDER product manufacturer as they may be
hazardous.
(Symbol provided by RETAC)
8
ENGLISH
Notices a nd Sa fety Instructions
9. VENTILATION:
13. OUTDOOR ANTENNA GROUNDING:
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of
the CAMCORDER and to protect it from overheating.
These openings must not be blocked or covered.
Never place your CAMCORDER on a bed, sofa, rug, or
other similar surface: on or near a radiator or heat
register.
This CAMCORDER should not be placed in a built-in
installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instructions have been adhered to.
If an outside antenna or cable system is connected to the
CAMCORDER, be sure the antenna or cable system is
grounded to provide some protection against voltage
surges and built-up static charges, Section 810 of the
National Electrical Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper grounding of
the mast and supporting structure, grounding of the
lead-in wire and supporting structure, grounding of the
mast and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of grounding to
conductors, location of antenna-discharge unit, connection
to grounding electrodes and requirements for the
grounding electrode.
10. POWER SOURCES:
The CAMCORDER should be operated only from the type
of power source indicated on the label.
If you are not sure of the type of power supply at your
home, consult your appliance dealer or local power
company.
See figure below.
A CAMCORDER is intended to be operated from battery
power, or other sources, refer to the operating instructions.
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
11.GROUNDING OR POLARIZATION:
ANTENNA
This CAMCORDER may be equipped with either a
polarized 2-wire AC line plug (a plug having one blade
wider than the other) or a 3-wire grounding type plug,
a plug having a third (grounding) pin.
If you are unable to insert the plug fully into the outlet,
try reversing the plug. If the plug still fails to fit,
contact your electrician to replace your outlet.
Do not defeat the safety purpose of the polarized plug.
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
GROUNDING CONDUCTORS
EQUIPMENT
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC NATIONAL ELECTRICAL CODE
12. POWER-CORD PROTECTION:
Power-supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords or plugs,
convenient receptacles, and the point where they exit from
the unit.
9
ENGLISH
Notices a nd Sa fety Instructions
14. LIGHTNING:
19. DAMAGE REQUIRING SERVICE:
For added protection of this CAMCORDER during a
lightning storm or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system.
This will prevent damage to the CAMCORDER due to
lightning and power-line surges.
Unplug this CAMCORDER from the wall outlet and
refer servicing to qualified service personnel under the
following conditions:
a. When the power-supply cord or plug is damaged.
b. If any liquid has been spilled onto, or objects have
fallen into the CAMCORDER.
15. POWER LINES:
c. If the CAMCORDER has been exposed to rain or water.
d. If the CAMCORDER does not operate normally by
following the operating instructions, adjust only those
controls that are covered by the operating instructions.
Improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the CAMCORDER to its
normal operation.
An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or
power circuits where it can fall into such power lines or
circuits.
When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines
or circuits as contact with them might be fatal.
e.If the CAMCORDER has been dropped or the cabinet
has been damaged.
f. When the CAMCORDER exhibits a distinct change in
performance, this indicates a need for service.
16. OVERLOADING:
Do not overload wall outlets and extension cords as this
can result in a risk of fire or electric shock.
17. OBJECTS AND LIQUIDS:
20. REPLACEMENT PARTS:
Never push objects of any kind into this CAMCORDER
through openings as they may touch dangerous voltage
points or short out a part that could result in a fire or
electric shock.
Never spill liquids of any kind onto the CAMCORDER.
Should spillage occur, unplug uni and have it checked by
a technician before use.
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer and having the same characteristics as the
original part.
Unauthorized substitutions may result in fire,
electric shock or other hazards.
21. SAFETY CHECK:
18. SERVICING:
Upon completion of any service or repairs to this
CAMCORDER, ask the service technician to perform
safety checks to determine that the CAMCORDER is
in safe operating order.
Do not attempt to service this CAMCORDER yourself.
Opening or removing covers may expose you to
dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
10
ENGLISH
Notices a nd Sa fety Instructions
NOTE TO CATV SYSTEM INSTALLER:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines
for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of
the building as close to the point of cable entry as practical.
USER INSTALLER CAUTION:
Your authority to operate this FCC certified equipment could
be voided if you make changes or modifications not expressly
approved by this party responsible for compliance to part 15
FCC rules.
11
ENGLISH
Getting to Know Your Ca m cord er
Features
Your camcorder has many features for recording and playing back.
Snap Shot (SCL750/L770 only)
The Snap Shot function lets you record an object at a standstill for a limited time in Camera mode. (see page 52)
PIP (SCL750/L770 only)
The PIP function shows where the center of the image is while recording in Digital Zoom of the Camera mode. (see page 51)
BLC
When you record a subject with the light source behind the subject or a subject with a light background,
use the BLC function. (see page 41)
DSE (Digital Special Effects)
The DSE enables you to give a creative look to your films by adding various special effects. (see page 44)
Program AE (Auto Exposure)
The Program AE enables you to adapt the shutter speed and aperture to the type of scene to be filmed. (see page 42)
DIS (SCL750/L770 only)
The DIS compensates for unstable images caused by hand shake, particularly at high magnification. (see page 39)
22x High ratio zoom lens
Zooming is a recording technique that lets you change the size of the subject in the picture.
For more professional recordings, use the zoom function. (see page 34)
Digital Zoom (880x)
Zooms more than 22x are performed digitally. (see page 35)
Macro
The macro function allows you to record your subject at close range.
You have to adjust the zoom fully wide for macro recording. (see page 34)
EASY
This mode enables even the beginner to easily make a recording. (see page 37)
Multi PLAYBACK (PAL60)
PAL60 is a special output signal format with which a tape recorded on this camcorder (NTSC format) can be viewed
on a PAL TV.
Hi8
Hi8 is an enhanced 8mm format.
When a Hi8 cassette is inserted, the camcorder will automatically select the Hi-8 format for record or playback.
12
ENGLISH
Getting to Know Your Ca m cord er
Front View
3. REC SEARCH
(REW)
4. REC SEARCH
(FF)
2. PLAY/STILL (LIGHT)
5. DATE/TIME (STOP)
7. EVF
6. TAPE EJECT
13. VIDEO LIGHT
1. LENS
9. Remote Sensor
10. LCD
8. MIC
11. CUSTOM
12. EASY
1. Lens (see page 72)
6. TAPE EJECT (see page 26)
Use when ejecting the tape.
2. PLAY/STILL (LIGHT) (see page 58)
PLAY/STILL works in PLAYER mode.
LIGHT works in CAMERA mode.
7. EVF (Electronic Viewfinder)
8. MIC
3. REC SEARCH
(REW)
MIC works in CAMERA mode.
REC SEARCH
works in STANDBY mode. (see page 28)
9. Remote Sensor (SCL710/L750/L770 only)
10. LCD (see page 29)
REW works in PLAYER mode. (see page 59)
4. REC SEARCH
(FF)
REC SEARCH
works in STANDBY mode. (see page 28)
11. CUSTOM
FF works in PLAYER mode. (see page 59)
CUSTOM works in CAMERA mode.
5. DATE/TIME (STOP)
12. EASY
DATE/TIME works in CAMERA mode.
(see page 47)
EASY works in CAMERA mode.
STOP works in PLAYER mode. (see page 58)
13. VIDEO LIGHT (SCL700/L750/L770 only)
13
ENGLISH
Getting to Know Your Ca m cord er
Side View
24. BLC
14. MENU ON/OFF
23. FADE
15. ENTER (MF)
16. UP/DOWN Dial (VOLUME)
20. SPEAKER
22. LCD Open
17. S-VIDEO out
18. P.AE
19. DSE
21. Lithium Battery
14. MENU ON/OFF (see page 30)
MENU ON/OFF works in CAMERA and
PLAYER mode.
19. DSE (see page 44)
DSE works in CAMERA and PLAYER mode.
20. SPEAKER (see page 60)
15. ENTER (MF) (see page 30)
ENTER works in MENU mode.
Speaker works in PLAYER mode.
21. Lithium Battery (see page 21)
22. LCD open
MF works in CAMERA mode. (see page 40)
16. UP/DOWN dial (VOLUME)
UP/DOWN dial works in MENU mode. (see page 30)
VOLUME works in PLAYER mode. (see page 60)
23. FADE (see page 50)
FADE works in CAMERA mode.
17. S-VIDEO out
24. BLC (see page 41)
18. PROGRAM AE (see page 42)
PROGRAM AE (Auto Exposure) works in
CAMERA mode.
BLC works in CAMERA mode
14
ENGLISH
Getting to Know Your Ca m cord er
Rear View
25. ZOOM
26. CASSETTE
Compartment
36. BATTERY EJECT
27. Hooks for shoulder strap
37. SNAP SHOT/D.ZOOM
28. AUDIO/VIDEO Out
39. USB JACK (SCL770 only)
MIC
32. START/STOP
33. External MIC
35. Battery Pack Compartment
(SCL750/L770 only)
29. LENS Cap
38. Recharging Indicator
34. DC Jack
30. Hand Strap
31. POWER Switch
25. ZOOM (see page 34)
33. External MIC (SCL750/L770 only) (see page 72)
34. DC Jack (see page 22)
26. Cassette Compartment
27. Hooks for Shoulder Strap (see page 21)
28. AUDIO/VIDEO out (see page 57)
29. LENS Cap
35. Battery Pack Compartment (see page 23)
36. BATTERY EJECT
37. SNAP SHOT/D.ZOOM
SNAP SHOT works in CAMERA mode.
(SCL750/L770 only, see page 52)
D.ZOOM works in CAMERA mode.
(SCL700/L710 only, see page 36)
30. Hand Strap (see page 20)
31. POWER Switch (see page 22)
- CAMERA : Select to record.
- OFF : Select to turn off the camcorder.
- PLAYER : Select to playback.
38. Recharging Indicator (see page 23)
39. USB Jack (SCL770 only) (see page 65)
32. START/STOP (see page 28)
15
START/STOP works in CAMERA mode.
ENGLISH
Getting to Know Your Ca m cord er
OSD (On Screen Display)
✤
✤
✤
You can turn the OSD on/off by setting the Display menu on/off.
The TITLE, DATE/TIME, EASY and CUSTOM functions can be operated even after the OSD is turned off.
The OSD is displayed in the viewfinder and the LCD monitor.
a. Zoom position (see page 34)
OSD in CAMERA mode
Indicates zoom position.
b. DIS (SCL750/L770 only)
(see page 39)
r
b a
t
s q
Indicates DIS is activated.
p
o
x
z
Hi8
x
REC
0:00:00
EASY
c
c. Battery level (see page 25)
880
W
T
CINEMA
m
f
n
XX
Indicates the power left in the battery.
OFF
(
)
TITLE
BLC
e
d
y
g
h
k
d. Manual Focus (see page 40)
Indicates manual focus is on.
Auto Focus is not displayed.
WAIT-10S
SELF-30S
12:00 AM
AUG. 29, 2002
j
i
e. BLC (see page 41)
Indicates BLC is activated.
f. Program AE (see page 42)
OSD in PLAYER mode
Indicates Program AE mode is
activated. (
,
,
,
,
)
r q
g. Self record waiting timer.
(SCL710/L750/L770 only) (see page 19)
Indicates 10 second timer.
c
p
o
u
Hi8
PLAY
0:00:25
Z.RTN
CINEMA
TITLE
TAPE!
h. Self record recording timer.
(SCL710/L750/L770 only) (see page 19)
(30 seconds or END).
v
l
w
VOLUME
i. Date (see page 46)
Indicates the date of the recording.
16
ENGLISH
Getting to Know Your Ca m cord er
OSD (On Screen Display)
j. Time (see page 46)
Indicates the time you are recording.
k. Title (see page 48)
Indicates the recorded title you have set.
It is superimposed on the scene.
l. Self diagnosis (see page 68)
Displays different diagnostic indicators concerning the camcorder’s operation.
m. DSE (Digital Special Effect) (see page 44)
Indicates the DSE mode is activated.
The operation modes are GHOST, STROBE, SEPIA, B&W, NEG., MIRROR, ART, MOSAIC, 16:9(WIDE) and CINEMA.
n. White Balance mode (see page 53)
Indicates the White Balance mode is activated.
The White Balance modes are AUTO, INDOOR(
) and OUTDOOR(
).
o. Tape counter
Indicates amount of the tape used.
p. Operation mode
Indicates the operation mode is activated.
The operation modes are STBY, REC , STOP, PLAY(
), FF(
), REW(
), EJECT.
q. Hi8 (see page 58)
Indicates you are using Hi8 tape when recording or playing back.
r. DEW(
) condensation (see page 71)
Monitors the moisture condensation.
s. Digital zoom (see page 35)
Indicates digital zoom is activated.
t. Snap Shot (see page 52)
Indicates the time left during Snap Shot Recording.
u. Zero return (SCL710/L750/L770 only) (see page 59)
Indicates that the zero return is activated.
v. PB DSE
Shows that the PB DSE mode is active.
w. VOLUME
x. EASY & CUSTOM
Shows when the easy or custom mode is active.
y. LIGHT (SCL700/L750/L770 only)
Shows when the Light is switched on.
z. Remocon (
OFF) (SCL710/L750/L770 only)
Indicates the remocon off mode is activated.
17
ENGLISH
Getting to Know Your Ca m cord er
Accessories Supplied with Camcorder
Make sure that the following basic accessories are
1. AC Power Adapter
2. AC cord
3. Battery Pack
supplied with your camcorder.
Basic Accessories
1. AC Power Adapter. (see page 22)
2. AC cord. (see page 22)
AD44-00038A
AD39-00028A
AD43-00065A
3. Battery Pack. (see page 23)
4. Audio/Video Cable. (see page 57)
5. Shoulder strap. (see page 21)
6. Instruction Book.
6. Instruction Book
4. AUDIO/VIDEO Cable 5. Shoulder Strap
Video Camcorder
8mm
COLOR LCD
7. Remote Control. (see page 19)
(SCL710/L750/L770 only)
AD39-40200A
AD63-00202A
8. Lithium Battery for Remote Control.
(see page 19) (SCL710/L750/L770 only)
Lithium Battery for Clock.
7. Remote Control
8. Lithium Batteries
9. Software CD
(TYPE: CR2025, see page 21)
9. Software CD (SCL770 only)
10. USB Cable (SCL770 only)
11. USB AUDIO Cable (SCL770 only)
AD59-00062A
AD43-10130H
AD46-00033B
10. USB Cable
11. USB AUDIO Cable
AD39-00073A
AD39-00074A
Optional Accessories
12. S-VIDEO cable
12. S-VIDEO cable. (see page 58)
AC39-42001Z
18
ENGLISH
Getting to Know Your Ca m cord er
Remote Control (SCL710/L750/L770 only)
Description of Buttons
1. Start/Stop (see page 27)
2. Self Timer
3. Still (see page 59)
4. WIDE (see page 34)
5. TELE (see page 34)
6. Display (see page 16)
3
6
11
START/
COUNTER
RESET
WIDE
STOP DISPLAY
4
5
12
1
2
8
9
7
SELF
TIMER
ZERO
RETURN
STILL
TELE
7.
8.
9.
10.
(Play) (see page 58)
(FF) (see page 59)
(REW) (see page 59)
(Stop) (see page 58)
10
11. Counter Reset (see page 59)
12. Zero Return (see page 59)
Remote Control Battery Installation
✤
You must insert or replace this battery when:
-
-
You purchase the camcorder.
The remote control doesn’t work.
✤
✤
Insert Lithium Battery, following the + and - markings.
Be careful not to reverse the polarity of the battery.
Self Timer Recording
The Self Timer function on the remote control allows you to start and
stop recording automatically.
✤
Example: recording yourself
Two options are available
✤
-
-
WAIT-10S/SELF-30S: wait 10 seconds, followed by 30 seconds of recording.
WAIT-10S/SELF-END: wait 10 seconds, followed by recording until you press the
START/STOP button again.
19
ENGLISH
Prep a ring
1. Set power switch to CAMERA mode.
1
CAMERA
2. Press Self Timer button until the appropriate indicator is
displayed on the LCD:
START/
COUNTER
RESET
WIDE
STOP DISPLAY
2
3
SELF
TIMER
ZERO
RETURN
STILL
TELE
■
■
WAIT-10S/SELF-30S
WAIT-10S/SELF-END
WAIT-10S
SELF-30S
3. Press START/STOP button to start the timer.
: After waiting for 10 seconds, recording starts.
: If you have selected SELF-30S, recording stops automatically
after 30 seconds.
START/
STOP DISPLAY
COUNTER
RESET
WIDE
SELF
TIMER
ZERO
RETURN
STILL
TELE
: If you have selected SELF-END, press START/STOP again
when you wish to stop recording.
Note: When recording with the timer, you can press START/STOP button again to cancel the function.
Adjusting the Hand Strap and Shoulder Strap
Hand Strap
✤
✤
It is very important to adjust the hand strap for better recording.
The hand strap enables you to:
-
-
Hold the camcorder in a stable, comfortable position.
Press the Zoom and the red Record button without
having to change the position of your hand.
1. Pull open the Hand Strap cover and release the Hand Strap,
adjust its length and stick it back onto the Hand Strap cover.
2. Close the Hand Strap cover back up again.
20
ENGLISH
Prep a ring
Shoulder Strap
✤
The Shoulder Strap allows you to carry your camcorder with complete safety.
1. Insert each end of the strap into the hooks on the camcorder.
2. Put the end of each strap through the buckle, adjust the length
of the strap, then pull it tight in the buckle .
Lithium Battery Installation
✤
The lithium battery maintains the clock function, title and preset contents of the memory; even if the battery pack or
AC power adapter is removed.
✤
✤
The lithium battery for the camcorder lasts about 8~10 months under normal operation from the time of installation.
When the lithium battery becomes weak or dead, the date/time indicator flashes for about 5 seconds when you set
the power switch to CAMERA.
When this occurs, replace the lithium battery with type CR2025.
1. Take out the holder from the lithium battery compartment.
2. Insert the side of the lithium battery toward the bottom
of the holder.
3. Reinsert the holder into the lithium battery compartment.
Note: If the holder is inserted in the wrong direction,
it will not fit correctly.
Warning: Keep the LITHIUM BATTERY out of the reach of
the children.
Should the battery be swallowed, consult a doctor
immediately.
21
ENGLISH
Prep a ring
Connecting the Power Source
✤
There are two ways to connect power source.
-
-
Using the AC Power Adapter : used for indoor recording.
Using the Battery Pack: used for outdoor recording.
To use the AC Power Adapter
1
2
CAMERA
3
1. Connect the AC Power Adapter to the AC cord.
2. Connect the AC cord to a wall socket.
Note: The plug and wall socket type may be different depending on regional conditions.
3. Connect the other end of the DC cable to DC jack of the camcorder.
4. To set the camcorder to the CAMERA mode.
a. Hold down the tab of the power switch and push the switch to CAMERA mode.
b. Make sure that the Lens Cap is open.
c. Open the LCD monitor and make sure that the image appears in the LCD monitor.
-
The LCD monitor is turned on automatically when it’s opened more than 30 degrees.
Note: If the adapter is used next to a TV or the camcorder,
it may cause the TV or camcorder to emit noise.
Move the adapter away from the TV, camcorder or the antenna cable.
22
ENGLISH
Prep a ring
To use the Battery Pack
How long will the battery last for recording?
✤
Depends on how often zoom is used in recording. Prepare as many battery packs as possible.
Recharging the Battery Pack
1. Attach the battery pack to the camcorder.
1
2
4
3
2. Connect the AC Power Adapter to the AC cord
and connect the AC cord to a wall socket.
3. Connect the DC cable to the DC jack of the camcorder.
4. Turn off the camcorder power, and the recharging indicator
will start blinking and begin recharging.
-
Blinking once a second : Indicates less than
50% has been charged.
OFF
-
Blinking twice a second : Indicates 50% ~ 75%
has been recharged.
-
-
-
Blinking three times a second : Indicates 75% ~ 100% has been recharged.
Blinking stops and stays on : Recharging has been completed.
On for a second and off for a second: Indicates there is an error. Reset the battery pack and DC cable.
5. If recharging is completed, separate the camcorder, AC power adapter, and battery pack.
Even if the power is turned off, battery will be discharged.
■
Note: Battery pack may be charged a little at the time of purchase.
23
ENGLISH
Prep a ring
Using the Battery Pack
Continuous recording time table based on model and battery type.
SCL750/L770
SCL700/L710
Model
Battery
Type
LCD ON,
EVF OFF
LCD OFF,
EVF ON
LCD ON,
EVF OFF
LCD OFF,
EVF ON
Approximately
90 minutes
Approximately
130 minutes
Approximately
80 minutes
Approximately
120 minutes
SB-L110A
Approximately
130 minutes
Approximately
190 minutes
Approximately
120 minutes
Approximately
160 minutes
SB-L160
SB-L320
Approximately
260 minutes
Approximately
390 minutes
Approximately
240 minutes
Approximately
340 minutes
✤
The continuous recording times given in the table are approximate.
Actual recording time depends on usage.
Notes:
✤
✤
✤
✤
The battery pack should be recharged in a room temperature that is between 0°C(32°F) and 40°C(104°F).
It should never be charged in a room temperature that is below 0°C(32°F).
The life and capacity of the battery pack will be reduced if it is used in temperatures below 0°C,
even when it is fully recharged.
The life and capacity of the battery pack will be reduced if the battery pack is left in temperatures above
40°C(104°F) for a long period, even when it is fully recharged.
Do not put the battery pack near any heat source (fire or flames, for example).
24
ENGLISH
Prep a ring
Battery Level Display
✤
The battery level display indicates the amount of power remaining
in the battery pack.
1
2
3
1. Fully charged
2. 10~40% consumed
3. 40~60% consumed
4. 60~80% consumed
(prepare a charged one)
5. 80~95% consumed
4
5
(change the battery)
6. 100% consumed
6
(camcorder will turn off soon, change the battery as soon as possible)
✤
✤
Please refer to the table on page 24 for approximate continuous recording times.
The recording time is affected by environmental temperature and conditions.
The recording time becomes very short in a cold environment. The continuous recording time in the operating
instructions is measured under the condition of using a fully charged battery pack at 25°C(77°F).
As the environmental temperature and conditions may be different when you actually use the camcorder,
the remaining battery time may not be the same as the approximate continuous recording times given
in these instructions.
Tips for Battery Identification.
A charge mark is provided on the battery pack to help you remember whether it
has been charged or not.
Two colors are provided (red and black)-you may choose which one indicates charged
and which indicates discharged.
Note: The charge mark does not affect the battery’s charge status.
25
|