PLD175TBT
WWW. PYLEAUDIO.COM
Instruction Manual
CAR VIDEO SYSTEM
DVD/VCD/MP4/MP3/CD/CD-R
/CD-RW Compatible
Anti-Shock Mechanism
AM/FM 2 Band Radio
Analogue TV Receiver
Bluetooth Function
PAL/NTSC Color System
Flip Down Detachable Front Panel
A/V Output & A/V Input
Sub-woofer Function
CONTENTS
Safety Information
1
2
Installation
1. DIN FRONT-MOUNT (Method A)
2
2. DIN REAR-MOUNT (Method B)
Wiring Diagram
3
4
Operation
5
Location and Function of Keys
Preparing The Remote Control
Using The Detachable Front Panel
General Operation
5
6
7
7
Radio Operation
9
CD/MP3 Operation
9
DVD/VCD Operation
11
15
15
15
16
16
16
17
17
18
19
19
20
Data Disc Play Operation
Operation of USB device
Operation of Memory Card
AV In Operation
TV Operation
Attachment
Setup
System Setup
Language Setup
Audio Setup
Digital Setup
Bluetooth Function Tipwizard
Trouble Shooting
22
23
Specification
Safety Information
Discs you can play
You can playback the following discs-
12CM on the receiver:
DVD VIDEO/DVD AUDIO
VIDEO CD/AUDIO CD
MP3/WMA/JPEG/MPEG4
CAUTION:
Automotive DVD player is a class 1 laser
product. However this car DVD player
uses a visible/invisible laser beam which
could cause hazardous radiation
exposure if directed. Be sure to operate
the car DVD player correctly as
instructed.
Use of controls or adjustments or
performance of procedures other than
those specified herein may result in
hazardous radiation exposure.
Do not open covers and do not repair
yourself. Refer servicing to qualified
personnel.
Handling and Cleaning
- Dirt, dust, scratches and warping discs
will cause disoperation.
- Do not place stickers or make scratches
on discs.
- Do not warp discs.
- A disc should always be kept in its case
when not in use to prevent from damage.
- Do not place discs in the following
places:
WARNING:
- To reduce the risk of fire or electric
shock, do not expose this equipment to
rain or moisture.
- To reduce the risk of fire or electric
shock, and annoying interference, use
only the recommended accessories.
- This device is intended for continuous
operation.
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by macro vision Corporation and
other rights owners. Use of this
copyright protection technology must be
authorized by Macro vision Corporation,
and is intended for home and other
limited viewing uses only unless
otherwise authorized by Macro vision
Corporation. Reverse engineering or
disassembly is prohibited.
1. Direct sunlight.
2. Dirty, dusty and damp areas.
3.Near car heaters.
4.On the seats or dashboard.
Disc Cleaning
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, Use a soft cloth
slightly moistures with isopropyl
(rubbing) alcohol. Never use solvents
such as benzene, thinner or conventional
record cleaners as they may mar the
surface of the disc.
Note:
A disc may become somewhat
scratched (although not enough to make
it unusable) depending on the way it is
handled and conditions in the usage
environment. Note these scratches are
not an indication of any problem with the
player.
Region Management Information
Region Management Information: This
automotive DVD Player is designed and
manufactured to respond to the Region
Management Information that is
recorded on a DVD disc. If the Region
number described on the DVD disc does
not correspond to the Region number of
this car DVD Player, this car DVD Player
cannot play this disc.
1
Installation
Label side up
Notes:
- Choose the mounting location where the unit
will not interfere with the normal driving
function of the driver.
- Before finally installing the unit, connect the
wiring temporarily and make sure it is all
connected up properly and the unit and the
system work properly.
Do not touch
the underside
of the disc
- Use only the parts included with the unit to
ensure proper installation. The use of
unauthorized parts can cause malfunctions.
- Consult with your nearest dealer if
installation requires the drilling of holes or
other modifications of the vehicle.
- Install the unit where it does not get in the
driver's way and cannot injure the passenger if
there is a sudden stop, like an emergency
stop.
Do not bend
Wipe the disc from center
toward the outside edge
- If installation angel exceeds 30°from
horizontal, the unit might not give its optimum
performance
Preparing New Discs with Rough Spots
A new disc may have rough edges on its
inside and outside edges. If a disc with
rough edges is used, the proper setting
will not be performed and the player will
not play the disc. Therefore, remove the
rough edges in advance by using a
- Avoid installing the unit where it would
be subject to high temperature, such as
from direct sunlight, or from hot air, from
the heater, or where it would be subject to
dust, dirt or excessive vibration.
Din Front/Rear-Mount
ballpoint pen or pencil as shown on the
below. To remove the rough edges, press
the side of the pen or pencil against the
inside and outside edges of the disc.
This unit can be properly installed
either from 'Front' (conventional DIN
Front-mount) or 'Rear' (DIN Rear-mount
installation, utilizing threaded screw
holes at the sides of the unit chassis). For
details, refer to the following illustrated
installation methods.
Rough spots on
outside edge
Take Out Screw Before Installation
Before install the unit, please remove
the two screws.
Ball point pen
or pencil
Take out screws
before installation
Rough spots on
inside edge
1. DIN Front-Mount(Method A)
Installing the unit
2
1
1. Frame
2. Release Frame Key
2
Insert the release frame key into the
groove at the right side of the frame,
then prize out to remove the frame (You
can also use the key to remove the
frame from the left side.)
3
3. Release Unit Key
After releasing the frame, insert the
release unit keys supplied with the
accessory into the grooves at both sides
of the unit as shown in figure until they
click. Pulling the keys makes it possible
to remove the unit from the dashboard.
(Fig.1)
1. Dashboard
2. Hoder
After inserting the holder into the
dashboard, select the appropriate tab
according to the thickness of the
dashboard material and ben them
inwards to secure the holder in place.
2. DIN Rear-Mount(Method B)
3
1
3. Screw
2
1
6
2
4
5
3
7
4
(Fig.2)
6
5
Ta b
1. Dashboard
2. Nut (5mm)
3. Spring washer
4. Screw (5X25mm)
5. Screw
6. Strap
1. Factory-installed radio bracket
2. Car radio mounting bracket
3. Screw
4. After aligning the car radio mounting
bracket with the factory-installed radio
bracket, tighten the screws (M5X4mm)
at 2 places on each side.
Be sure to use the strap to secure the
back of the unit in place. The strap can
be bent by hand to the desired angle.
7. Plain washer
Removing the unit
1
5. When fixing factory-installed radio
bracket with the screws, use a
standard-tipped screwdriver to pry the
tabs of the car radio mounting bracket
to make them fit into holes in the
factory-installed radio bracket.
6. Movable panel frame.
2
3
3
Wiring Diagram
White to Rear Lch RCA output
Red to Rear Rch RCA output
Green to SUB-Woofer output
TV Socket
Violet Rear Right +
Yellow to Battery B+
Violet/Black Rear Right -
Black to GND B-
Grey Front Right +
Red to ACC
Blue to ANT
Grey/Black Front Right -
White Front Left +
Green Rear Left +
Green/Black Rear Left -
White/Black Front Left -
4
Operation
Location and Function of Keys
2
42
6
7
44
9
8
18
3
26
14
17
13
20
24
22 16 23
21
25
12
11
15
19
43
43
AV IN
To connect with mobile audio
or video system by the cable
(included in unit)
When you press button (3) and the front panel flip down:
41
4
5
10
1
5
Remote control:
-
-
Do not put in a trouser pocket.
Keep away from food, moisture and
dirt.
-
DISP
RPT
MODE
SUB-T
2
Do not place in direct sunshine.
MUTE
7
13
Battery replacement
Battery type: a button cell lithium battery
(CR2025 3V)
1. Remove the battery holder by
pressing the locking tab with your thumb
and pulling it out.
A-B
AUDIO
27
39
38
22
ZOOM
28
42
40
ANGLE
MENU
ENTER
29
30
6
VOL
SETUP
31
BT MENU
36
18
35
34
TRK/TUN
19
TITLE
PBC
1
GOTO
AS/PS
PROG
LO/DX
RDM
37
20
17
21
DEL
B
2
5
8
3
33
15
14
A
32
2. Replacing the battery
Replace the battery with the same type
and the (+) side facing up.
4
7
6
9
MO/ST
0
BAND
Preparing The Remote Control
When using the Remote Control
* Before you using the remote control,
please take the transparent insulator
slice off the bottom of remote control.
* Point the remote control at the remote
sensor (9) within 2 meters.
* It may not be possible to operate the
remote control if the remote control
sensor is exposed to direct sunlight.
* Operation angle: about 30°in each the
direction of the front of the remote
sensor.
3. Closing the cover
Gently push in the holder until securely
locked into place.
* The remote control is a small,
lightweight precision device. To avoid
damage, short battery life, operational
errors and poor response, observe the
following.
- Do not subject the remote control to
excessive shock.
6
Using The Detachable Front Panel
General Operation
REMOVING AND PROTECTING
DETACHABLE FRONT PANEL.
Initial System Start-Up
Be sure to press the RESET button (1)
when using the unit for the first time, after
all connections are completed correctly.
1. Turn off the unit power.
2. Press RESET with a ballpoint pen or
similar pointed object.
The front panel of the unit may be removed
as a theft deterrent. After removing the front
panel, use the case provided to keep the front
panel from getting damaged.
1.Press the Open button (3) to flip
down the front panel.
Turning Power On And Off
Turn on the unit by pressing any button
(except button (3) and button (5)) or
inserting a disc to disc slot (4).
When system is on, press
turn off the unit.
button (2) to
open button
Loading/Removing a Disc
1. Press button (3) to flip down the
front panel.
2.Grasp the right side of the front panel,
then gently push the front panel towards
the left side before pulling it out from the
unit.
2. Insert the disc into the disc slot (4) with
the printed side facing up; the player will
play the disc automatically.
front panel
Whenever press
disc.
button (5) to eject the
Adjusting sound quality
3.Store the front panel in the protective
case provided for safe keeping.
PROTECTIVE CASE
- Adjusting the volume level
Rotate the VOL button (6) or press VOL
(+/-) button (6) to adjust the volume level.
- Adjusting Bass /Treble /Balance
/Fader/EQ/Loud/Subwoofer
1. Press VOL button (6) repeatedly to
choose the desired mode.
Remote control operation:
Press Menu button (36) and then press
button (29) to choose the desired
mode.
Each pressing the button changes the
modes as follows:
FRONT PANEL
TO ATTACH THE FRONT PANEL
Hold the right side of the front panel with
the plate facing down.
First attach the left side of the front panel
to the unit by inserting the hole into the left
holder.
Then slightly push it leftwards and attach
the right side hole into the right holder.
Finally push up the front panel.
VOL
SUBW
BASS
TREB
EQ
BAL
FAD
LOUD
Volume level:00 ~ 63
Bass level: -07 ~ +07
Treble level: -07 ~ +07
Balance: 15L ~ 15R
Fader: 15R ~ 15F
2
EQ: Flat, Classic, Pop, Rock
Loudness: ON/OFF
1
7
Sub-woofer: ON/OFF
equalization function and to select
desired audio mode. There are four kinds
of mode as below:
2. Rotate the VOL button to choose the
desired item.
Remote control operation
Press
desired item.
button (29) to choose the
EQ FLAT
EQ CLAS
EQ POP
EQ ROCK
Display/Adjust Time
1. Displaying time:
Press DISP button (7) to show current
information and time on the LCD, and it
returns to original status after 5 seconds.
2. Adjusting time:
Mute Function
Press MUTE button (2) to silence the
sound instantly, press it again to resume
previous volume level.
1). Press and hold DISP button (7) until
the clock blinking.
Mode Function
Press MODE button (13) to switch to the
desired mode.
The mode will change every time the
button is pressed.
2). Press
between hour area and minute area.
or
button to move to
3). Rotate VOL button (6) or
adjust hour or minute.
to
DISC/USB/SD
TV AV IN
TUNER
LCD Display (8)
Exhibit current information and activated
functions on the LCD display (8).
Last Position Memory
- During disc playback, if you press
button (2) to turn off the unit and then
press the button again to turn on the unit,
the DVD unit will resume playing from the
point that it was interrupted.
- During disc playback, if you press
MODE button (13) to switch to other
mode, and then return to DVD/VCD mode
again, the unit will resume playing from
the point that it was interrupted.
Remote Sensor
Point the remote control handset to the
remote sensor IR (9). Press the function
keys on the handset to control the
system.
Flashing Led (10)
The led display will flash if the front cover
is not inserted into the main unit.
Sub-Woofer Function
This unit is equipped with a sub-woofer
output jack. When a sub-woofer is
connects to this unit. Press VOL button
(6) repeatedly to select SUBW and then
rotate VOL button to turn sub-woofer
output on or off.
ESP function
If the unit has the electronic shockproof
function, it can be shockproof about
several seconds:
CD, VCD: 18 seconds.
MP3: 160 seconds.
DVD: 6 seconds.
MPEG4: 20 seconds.
Loudness on/off
Loudness introduces a special low- and
high-frequency emphasis at low listening
levels. This compensates for the ear's
decreased sensitivity to bass and treble
sound. Press LOUD button (11) to switch
loudness on/off.
Reset Function
RESET button on the housing must be
activated with either a ballpoint pen or
thin metal object. The RESET button (1)
is to be activated for the following
reasons:
-
Initial installation of the unit when all
wiring is completed.
All the function buttons do not
operate.
-
Equalization
Press EQ button (12) to turn on
8
- Error symbol on the display.
Note:
If press RESET button(1), the unit can't
work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
disc socket.
stop level, the radio is holding at that
preset number for several seconds with
release mute, and then searches again.
Station Storing
- Press
seek mode.
button to activate automatic
- In manual mode, press
select a station.
Press preset 1-6 button (16) for several
seconds to store current station into the
number button.
button to
Radio Operation
Selecting The Frequency Band
Press BAND button (14) shortly to select
the desired band. The reception band will
change between FM and AM.
CD/MP3 Operation
Stereo/Mono
Press ST (15) or MO/ST on the remote
control to select mono/stereo mode.
Playback
1. Gently insert a disc with the label side
facing up; the disc will be pulled into the
unit automatically. The disc playback
begins.
Local/Distant
Press ST LOC (15) for several seconds
or LO/DX on the remote control to select
between local and distant stations.
LOCAL setting for reception of strong
signal station, and DISTANT setting for
reception of weaker signal stations.
2. For CD:
Selecting Station
- Press preset 1-6 button (16) to select a
station which had been stored in the
memory.
- Press
“MANUAL” appears on the display, and
then press button to select a station.
for several seconds until
3. For MP3
If both buttons have not been pressed for
several seconds, they will return to
automatic seek mode .
Automatic Memory Storing & Program
Scanning
- Automatic memory storing
Press AS/PS button (17) for several
seconds, the radio searches from the
current frequency and checks the signal
strength until one cycle search is
finished. And then 6 strongest stations
are stored into the corresponding preset
number button.
1). Press
work area A, B and C.
button to move between
- Program scanning
2). Press
button to select the
Press AS/PS button (17) shortly to scan
preset station. When the field strength
level is more than the threshold level of
desired folder or file of this work area.
3). Press ENTER button (30) to confirm
the selected item.
9
Selecting Tracks In Single Step
Press
REP 1 REP ALL REP OFF
For MP3:
button (18) or button (19) to
skip to the previous track or the next
track. Track number shows on display.
REP 1 REP DIR REP ALL REP OFF
Press and Hold
button (18) or
NOTES:
REP 1: Only the current track (file) is
repeatedly playing.
button (19) to fast reverse or fast
forward. It return to normal mode when
you release the button.
REP DIR: Only tracks (files) in the
current folder are repeatedly playing.
REP ALL: Current disc is repeatedly
playing.
REP OFF: The mode returns to normal
playback.
- Paragraph Repeat Play:
Pause Playback
Press
button (20) to pause CD/MP3
playing. Press it again to resume
playback.
Stopping playback
When you want to repeat play a desired
paragraph. A-B repeat allows a passage
to be repeated continuously.
Press A-B button (27) first at the start of
the required passage.
- Briefly press the button (21) to stop
the unit playback. When the button (21)
is pressed and then press button(20),
resume to the normal playback.
- Press button (21) twice and then
press button (20) to stop the playback
and go back to beginning of the disc.
REPEAT A-
Press A-B button (27) secondly at the
end of the passage.
Fast-Forward / Fast-Reverse
1. Fast-Forward
REPEAT A-B
Press button (35) during playback.
Each time the button is pressed, the
speed of fast-forward changes according
to the disc as follows:
Then the unit will repeat playing the
passage you just set from A to B.
To revert to normal playback, press A-B
button again.
FORWARD 2X 4X 8X 20X
REPEAT CANCEL
In fast-forward state, press button (20)
to recover normal playback.
2. Fast-Reverse
Playing In Random Sequence
Press button (34) during playback.
Each time the button is pressed, the
speed of fast-reverse changes according
to the disc as follows:
Press RDM button to toggle the random
mode on/off. If the random mode is on,
tracks (files) on the disc will be play in
random sequence.
BACKWARD 2X 4X 8X 20X
Previewing All Tracks
In fast-reverse state, press button (20)
to recover normal playback.
Press INT button (24) to play first several
seconds of each track on the current
disc. Press the button again to stop intro
and return to normal mode.
Repeat Play/ Paragraph Repeat Play
- Repeat play:
When you want to repeat play whole disc,
a track or a directory in the disc.
1) Press RPT button (22) repeatedly to
select different repeat modes.
2) For different kinds of discs, pressing
RPT button (22)has different effects.
For CD:
10
In fast-forward state, press button (20)
to recover normal playback.
2. Fast-Reverse
DVD/VCD Operation
Playback with PBC Menu
For some VCD or SVCD discs, there is
menu in order to select the deired
contents. This menu is called PBC
(Playback Control) menu.
Press PBC button (37) to toggle between
PBC ON and PBC OFF.
Press button (34) during playback.
Each time the button is pressed, the
speed of fast-reverse changes according
to the disc as follows:
BACKWARD 2X
4X
8X
20X
In fast-reverse state, press button (20)
to recover normal playback.
In PBC ON mode, REPEAT, RANDOM, A-
B, PROGRAM and GOTO functions are
void.
Repeat Play/ Paragraph Repeat Play
- Repeat play:
Playback With Menu
If the DVD disc or VCD/SVCD discs has a
menu system, and the PBC (Playback
Control) setting is on, you can display the
menu which allow you to select the
program to playback by pressing
TITLE/PBC button (37).
When you want to repeat play whole disc,
a track or a chapter in the disc.
1) Press RPT button (22) repeatedly to
select different repeat modes.
2) For different kinds of discs, pressing
RPT button (22) has different effects.
For DVD:
1. Move the cursor buttons (
highlight the item you wish to select.
) to
REP CHAPTER REP TITLE REP OFF
2. Press ENTER button (30) to select this
item.
For VCD/SVCD:
Some discs offer a series of menus which
with a wide variety of choices. You can
continue to navigate the menu further
using a combination of the cursor buttons
REP 1 REP ALL REP OFF
NOTES:
REP 1: Only current track (file) is
repeatedly play.
(
) and the ENTER button (30).
REP CHAPTER: The current chapter is
repeatedly play.
Pausing playback
1. During playback, Press
button (20),
REP TITLE: The title is repeatedly play.
REP ALL: A disc is repeatedly play.
REP OFF: The mode returns to normal
playback.
the image or sound pauses temporarily.
2. Press the button (20) again to
resume playback.
* Repeat feature does not support VCD
2.0 (PBC is on).
Stopping Playback
Briefly press the
button (21) to stop
the unit playback When the
pressed and then press
resume to the normal playback.
Press button (21) twice and then
press button 20 to stop playback
button is
button 20 ,
- Paragraph Repeat Play:
When you want to repeat play a desired
paragraph. A-B repeat allows a passage
to be repeated continuously.
Press A-B button (27) first at the start of
the required passage.
and go back to the initial track/chapter.
Fast-Forward / Fast-Reverse
1. Fast-Forward
Press the button (35) during playback.
Each time the button is pressed, the
speed of fast-forward changes according
to the disc as follows:
REPEAT A-
Press A-B button secondly at the end of
the passage.
REPEAT A-B
Then the unit will repeat playing the
passage you just set from A to B.
FORWARD 2X 4X 8X 20X
11
To revert to normal playback, press A-B
button again.
console information of the current disc on
the screen.
FOR DVD:
Press SUB-T button (38) for several
seconds continually, you will see the
information as the following order.
REPEAT CANCEL
Finding The Beginning of Chapters or
tracks (Files)
Use this function to easily move to the
beginning of the chapters or tracks (files)
on the disc.
During playback, each time press
button (18) or button (19) to skip and
play the chapter /track.
: Press the button to start playback
from the beginning of the next chapter or
track (file).
1)TT
Display the current title number and total
title number.
2)CH
Display the current chapter number and
total chapter number.
3)
Display the played times of the whole
disc.
4)C-:
: Press the button to start playback
from the beginning of the previous
chapter or track (file).
Note:
1. Some DVDs do not have chapters.
2. For some VCD2.0 discs (PBC control),
,
buttons may be void.
Display the remaining times of the
current chapter.
5)T:
Display the played times of the current
title.
6)T-:
Searching Directly by Chapter or Track
Number
Use this function to easily move to the
beginning of the chapters or tracks (files)
on the disc.
* This operation is performed by the
remote control unit.
Display the remaining times of the
current title.
1. During playback, pre-stop or pause,
input the chapter or track number you
want using the numeric keypad (“0” to
“9”).
7)C:
Display the played times of the current
chapter.
8)
2. Waiting for a little.
Playback starts from the selected
chapter or track.
* This function cannot be used on discs
which no chapter numbers are recorded.
Display the current disc language, audio
type, subtitle language and play angle.
For VCD:
The meaning of the menu is the same
with the DVD menu above.
Playing In Random Sequence
Press RDM button to switch the random
mode on/off.If the random mode is on,
tracks (files) on the disc will be play in
random sequence.
On Screen Display Function
Press the SUB-T button (38) for several
seconds during playback to display the
12
according to the disc.
- Some discs only contain one subtitle
language.
GOTO Function
Press GOTO button, the screen will
display the following message:
FOR DVD:
Switching the Audio Tracks
For some VCD/SVCD discs what with
multiple audio tracks, you can switch the
audio track temporarily during playback.
Each time press AUDIO button (39)
during playback, the sound switches
between the audio tracks recorded on the
disc.
Use the number keys (32) to input the
desired Title, Chapter or Time, and then
press ENTER button (30) to confirm.
FOR VCD:
PBC
Use the number keys (32) to input the
Track and Time then press ENTER button
(30) to confirm.
Notes:
- Some discs only contain one
soundtrack language.
ZOOM Function
Press ZOOM button (28) to enlarge or
reduce the size of image according to the
disc as follows.
Multi-audio Language Function
For DVD discs what with multiple audio
tracks, you can switch the audio track
temporarily during playback.
ZOOM 2 ZOOM 3 ZOOM 4 ZOOM 1/2
ZOOM 1/3 ZOOM 1/4 ZOOM OFF
In zoom in state, press
buttons
Each time press AUDIO button (39)
during playback, the sound switches
between the audio tracks recorded on the
disc.
(29) to move pictures up/down, left/right
direction in order to find the picture that
you want to zoom in.
:
Multi-subtitle Language Function
Some DVD has multiple subtitle
language, the subtitle language can be
switched during playback, or subtitles
can be hidden.
Press SUB-T button (38) during
playback. The following information will
be shown on the screen.
:
Each time the button is pressed, the
audio soundtrack language changes on
sequential order.
Notes:
- The language number is different
according to the disc.
- Some discs only contain one
soundtrack language.
- Not all discs will allow changing the
subtitle during playback. In these cases,
select subtitle from the DVD's menu.
Each time press the button, the subtitle
switches between multiple languages
recorded on the disc.
Notes:
- Not all discs will allow changing the
subtitle during playback. In these cases,
select subtitle from the DVD's menu.
- There may be a delay before the
selected subtitle appears.
Multi-angle Function
For some DVD discs in which scenes
have been filmed from multiple angles,
the angle can be switched during
playback.
- For some discs, the subtitles will be
displayed even when this is set to off.
- The language number is different
Press ANGLE button (40) during
playback. The following information will
be shown on the screen.
13
ANGLE 1
edit interface as follow:
The angle switches between the angles
recorded on the disc each time the button
is pressed.
Notes:
- Some time may be required for the
angle to change.
- Depending on the disc, the angle may
switch in one of two ways.
1. Seamless: The angle switches
smoothly.
2. Non-seamless: When the angle is
switched, a still picture is displayed
first, after which the angle switches.
- The angle number is different
according to the disc.
Use
cursor button to select the
item that you want to program.
1). The item you selected will become
highlight.
- The function only works for discs
having scenes recorded at different
angles.
2). Input the track number that you want
to program by numeric buttons (0-9) on
the remote control.
3). Press
cursor buttons to
Program Play Function
move to "PLAY" operation button and
then press ENTER button (30) to program
playback.
- In VCD/CD playback mode, press
PROG button 33) can activate program
edit interface as follow:
Frequently Asked Questions
When inserting a DVD disc, why it can't
be played, just showing “region error”?
It is because that the DVD player and
the discs all have the “REGION CODE”. If
the region number described on the DVD
disc does not correspond to the region
number of this DVD player, the unit
cannot play the disc.
When inserting a DVD disc, there is a
window shown on the screen that
requires entering 4 characters password,
why?
Use
cursor button to select the
It is because that the current disc has
“Parental Control” level, and the player's
parental level is set below the level of the
disc, you should enter the correct
password to play the disc normally.
NOTE:
For how to set the “Parental Control”
level, please refer to “Parental Control”
on page 17.
item that you want to program.
1). The item you selected will become
highlight.
2). Input the track number that you want
to program by numeric buttons (0-9) on
the remote control.
3). Press
cursor buttons to
move to "PLAY" operation button and
then press ENTER button (30) to
program playback.
- In DVD/MP3 playback mode, press
PROG button (33) to activate program
14
disc. Press
(21) button to enter into
Data Disc Play Operation
PRE-STOP mode, then press GOTO
button to switch to the reading USB
mode.
When you insert a data disc including
audio (MP3), movie (MPEG), picture
(JPG) files into the disc slot, the following
media play window will be shown on the
screen:
Note:
When reading the USB device, please
don't touch or take out the device.
If following the instruction above, the unit
can't still read the device, please check if
the device is in good condition, or take
out the device then insert it into the USB
port (26) once more.
? The main unit can only support the
standard USB-memory disc which is
approved by Microsoft.
? USB MP3 player is not a standard
which means different brand name or
different models have their own standard.
So our product may not support every
MP3 player.
?When connecting an MP3 player and
there has normal battery in the player
(non rechargeable battery), you should
remove the battery from the MP3 player
then connect it to the USB port.
Otherwise, it may cause battery burst.
?When in USB play mode, be sure not to
remove the USB device from the USB
port.
Explain as follows:
Work area A: folders list
Work area B: files list
Work area C:
(1): playback audio mode (default)
(2): viewing picture mode
(3): playback movie mode
Work area D: file information display
1. Press
button to move between
work area A, work area B and work area
C.
Operation of Memory Card
2. Press
folder or file of this work area.
3. Press ENTER button (30) to confirm
the selected item.
button to select the desired
This disc player offers you a memory card
slot (41).
4. In viewing picture or playback movie
mode, if you want to return to the
Using the SD/MMC card:
When you insert a SD/MMC card into the
memory card slot (41), the DVD player
will read the SD/MMC card automatically.
The unit gives first priority to the latter. If
insert a disc into the disc slot (4) while
read the SD/MMC card, the unit will play
the disc. Press (21) button to enter into
PRE-STOP mode, then press GOTO
button to switch to the reading card
mode.
previous menu, press
(STOP) button.
Operation of USB device
This disc player offers you an USB port
(26). A USB device can be connected
through this slot.
Using the USB driver:
When you insert an USB device into the
USB port (26), the DVD player will read
the USB automatically.
The unit gives priority to the latter. If
insert a disc into the disc slot (4) while
read the USB device, the unit will play the
Note:
When reading the memory card, please
don't touch or take out the card.
If following the instruction above, the unit
can't still read the card, please check if
15
the card is in good condition, or take out
the card then insert it into the card slot
once more.
Attachment
1. About Parental Control
DVD discs have a parental level assigned to
the disc. The range of parental controls is
from 1 to 8.
AV In Operation
The player can be set in a similar way. If the
player's parental level is set to 8 it will play
all discs. If the player's parental level is set
below 8, only discs with a lower or equal
parental level can be played.
For example if the player is set to 5, only
discs with parental control ratings of 5, 4, 3,
2, & 1 can be played. To play a higher rated
disc you must change the player's rating to
a higher number.
This disc player offers you the option of
using the auxiliary A/V input jack to
connect a video game, digital camera/
camcorder or other units you wish to use
in your automobile audio/video system.
1).To connect with a automobile
audio/video system by AV IN cable.
2).Press the MODE button (13) to toggle
the AV IN mode on or off.
For example, consider a disc that generally
is suitable for most audiences, and is rated
as level 2 for the most part. However in the
middle there are also scenes rated at 5 & 7
that are not fitting for children, it will be
cleared or replaced by the other fitting
scene automatically.
TV Operation
Press MODE button (13) to switch to TV
mode. In TV mode, the function of the
buttons served in DVD mode is locked.
The player plays the highest rated scene
that the parental setting allows.
Searching Channels
Pressing GOTO button will enter into
automatically searching state. Then
press button (19) to start searching TV
channels and press button (18) to stop
searching.
A section of the disc can have several
different sequences that vary in parental
control level. In the above example of a disc
with parental control, the player will show a
different section depending on the parental
control level set in the player's menu.
In this way parents can control the content
of films and there is no indication that any
censorship has occurred.
Selecting Channels
- Press button (19) to choose channel
upward, press button (18) to choose
The meaning of the levels 1 to 8 varies
depending upon the country and the type of
content on the disc.
channel downward.
- Type two digits to select desired
channel by the corresponding numeric
button (32).
The parental control levers are:
Unlock
KID SAFE
G
PG
PG 13
Unlock
PG-R
R
NC-17
ADULT
Volume Adjustment
Press VOL+/VOL- button (6) adjust
volume level.
1
2
3
4
5
6
7
8
Mute
Press MUTE button (2) to mute the
sound, press this button again to resume
previous volume level.
16
2. About MP3
What is MP3?
Setup
MP3, whose official name is “MPEG-1 Audio
Layer 3,” is a compression standard
prescribed by the ISO, the International
standardization organization and MPEG
which is a joint activity institution of the IEC.
MP3 files contain compressed audio data.
MP3 encoding is capable of compressing
audio data at extremely high ratios,
reducing the size of music files to as much
as one-tenth their original size. This is
achieved while still maintaining near CD
quality. The MP3 format realizes such high
compression ratios by eliminating the
sounds that are either inaudible to the
human ear or masked by other sounds.
Method for creating MP3 files
Audio data is compressed by using MP3
specified software. For details on creating
MP3 files, refer to the user's manual for that
software.
MP3 files that can be played back by this
device have the file extension “MP3”. Files
with no extension cannot be played back.
Supported playback sampling rates and bit
rates
In DVD mode, when the disc is playing or
in stop mode, press SETUP button (31) to
enter setup menu.
1. When the cursor is on the topside, use
buttons to move between the
different pages.
2. Press button to move the cursor to
the setup page below and then you can
use buttons to move between the
different setup options.
3. Press or ENTER button to move to
the choice list of each setup option and
then use
buttons and ENTER
button to change your selection.
4. When the setting is complete, press
SETUP button (31) to return to normal
mode.
* When settings are changed, old settings
are overwritten. Make a note of the
current settings before making changes.
If the vehicles battery is disconnected,
the settings will be cleared and will return
to the factory settings.
MP3:
Sampling rates: 32 KHz - 48 KHz
Bit rates: 32 + 320 kbps
Producing MP3 discs
System Setup
When you open the setup menu, you will
see the system setup page at first, see
below:
MP3 files are prepared, and then written to
a CD-R or CD-RW (DVD-R/DVD-RW) using
CD-R writing software. A disc can hold up to
1024 files /256 folders (including root
folders).
Corresponding file systems
This device supports discs formatted with
iso9660 level 1 or level 2.
Under the iso9660 standard, there are
some restrictions to remember.
The maximum nested folder depth is 8
(including the root directory). The number
of characters for a folder/file names are
letters A-Z (all caps), numbers 0-9, and '_'
(underscore).
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
TV SYSTEM
TV SYSTEM is used to select the TV
output mode. This player can play discs
recorded in either PAL or NTSC formats.
Select NTSC format, when the unit is
connected to NTSC TV.
This device also can play back discs in
Joliet, Romeo, etc., and other standards
that conform to iso9660. However,
sometimes the file names, folder names,
etc., are not displayed correctly.
Select PAL format, when the unit is
connected to PAL TV.
17
Select AUTO format, the player TV output
Change the TV mode among NTSC, PAL
and AUTO. The default setting is NTSC
format.
16:9
Select this when connected to a wide
screen TV.
SCREEN SAVER
Change the SCREEN SAVER on or off.
SETTING the TV TYPE
Use the procedure described below to set
the output screen according to the type of
TV monitor being used.
Setting contents: 4:3PS /4:3LB /16:9.
For some discs, the picture may not be
set to the selected screen size. (For
details, refer to the explanation on the
disc's jacket.)
Password
Change the password locking or
unlocking Inputting numbers are
dispalyed as "XXXX" The default
password is “0000”.
SETTING the Rating Level (Parental
Control)
4:3 PS (PAN SCAN)
Select this when connected to a
conventional 4:3size monitor. The picture
will fill the entire TV screen. However,
due to the mismatch in aspect ratio, parts
of the movie at the extreme left and right
sides will not be visible (when playing a
16:9 size movie).
Use this function to restrict the viewing of
movies to children of appropriate age
levels only.
1) Press
or
button to select
“PASSWORD” then press ENTER button.
2) The password input mode is activate.
Use the numeric keypad “0” to “9” to input
the 4-digit password, and then press
ENTER button. The default password is
“0000” upon shipment from the factory.
3) Press or button to select
“RATING” then press ENTER button.
The restriction level parental level
input display appears
This is selected upon shipment from the
factory.
4:3 (LETTER BOX)
4) Press
button to select the
restriction level (1 to 8), and then press
ENTER button.
Select this when connected to a
conventional 4:3 size (normal TV aspect
ratio) monitor. There may be black bands
visible at the top and bottom of the
screen (when playing a 16:9 size movie).
The width of these stripes will depend
upon the original aspect ratio of the
theatre release of the movie.
5) When the setting is complete, press
SETUP button to return to normal mode.
DEFAULT
Restore the system setup to the default
setup.
Language Setup
When you open the language setup
menu, you will see the language setup
page:
18
menu, you will see the DIGITAL SETUP
page:
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
DIGITAL SETUP
SUBTITLE LANG
MENU LANG
DIVX [R] VOD
OP MODE
DYNAMIC RANGE
DUAL MONO
EXIT SETUP
EXIT SETUP
You can change the OSD/ AUDIO/
SUBTITLE/ MENU language:
1). OP MODE: Change among LINE
OUT/RF REMOD.
OSD LANGUAGE:
ENGLISH/GERMAN/SPANISH/FRENCH/PORTU
GUESE/ITALIAN/RUSSIAN/POLISH
- LINE OUT: LINE OUT mode, with
digital dialog normalization.
- RF REMOD: RF REMODULATION
mode, with heavy compression and
digital dialog normalization.
2). DYNAMIC RANGE: Change among
FULL, 6/8, 4/8, 2/8, OFF.
AUDIO LANG:
ENGLISH/GERMAN/SPANISH/FRENCH/PORTU
GUESE/ITALIAN/RUSSIAN/POLISH
3). DUAL MONO: Change among
STEREO, MONO L, MONO R, MIX
MONO.
SUBTITLE LANG:
ENGLISH/GERMAN/SPANISH/FRENCH/PORTU
GUESE/ITALIAN/RUSSIAN/POLISH
MENU LANG:
ENGLISH/GERMAN/SPANISH/FRENCH/PORTU
GUESE/ITALIAN/RUSSIAN/POLISH
Audio Setup
When you open the AUDIO menu, you will
see the following picture:
AUDIO SETUP
AUDIO OUT
KEY
EXIT SETUP
1) AUDIO OUT: Change among
SPDIF/OFF, SPDIF/RAW and
SPDIF/PCM.
2) KEY: Change among b,-4, -2, 0, +2,
+4, #.
Digital Setup
When you open the DIGITAL SETUP
19
6. BT MENU
Bluetooth function Tipwizard
At connect status, press the BT MENU
button (31) on the remote control to enter
bluetooth menu. The structure of the blue
tooth menu as follows:
1. PAIR
During pairing, please input pairing PIN
code “8888” and confirm in your mobile
phone.
PRES
RECV
DIAL
MISS
06: Preset number list.
06: Received call list.
06: Dialed call list.
06: Missd call list.
2. CONNECT
The bluetooth module can auto connect
with your mobile phone so long as you
activate the bluetooth of the mobile
phone. If connecting success, “CON OK”
will be visible on the LCD of this unit,
otherwise, it will appear “NO CONT” on
AUTO ON/OFF: Switch auto answer or
manual answer.
Use
cursor button to select the item.
Press the ENTER to enter the current
menu item. Press the ZOOM button (28)
to exit from current menu. Press the BT
MENU button exit bluetooth menu.
the LCD. Meanwhile, the “BT” and “
twinkle continuously on the LCD display.
”
3. DIAL CALL
a) Select preset number list:
You can select the next or prev phone
number that stored on preset number list
3.1 Dial with the mobile phone directly.
3.2 Dial with the remote controller.
3.2.1 At connect status, press the “
button (42) to activate bluetooth mode,
the “CONNTED” will be shown on the
LCD display.
3.2.2 Press “0~9” button on the remote
control to input telephone number.
Simultaneity, the input number will be
appeared on the LCD. If a number is
wrongly input, press the DEL button (21)
to delete the incorrect number.
”
by pressing the
button.
b) Edit preset number list:
Press ENTER to enter preset number list.
You can see NONUMBER(1-6) on the
LCD if you haven’t stored any phone
number. Then press ENTER again to
enter editing status. Press 0~9, # or to
*
edit phone number, (pressing and holding
the + (14) button, when you want to input
“ + ”) . Simultaneity, the inputted number
will be appeared on the LCD. If a number
is wrongly input, press the DEL button
(21) to delete the incorrect number. After
the entire phone number has been input,
press the ZOOM to save the phone
number. Press ZOOM again to exit from
phone editing status.
3.2.3 press the “
dialing.
” button to execute
4. Accept / Reject / End call
4.1 Accept call
When a ring comes, press the “ ” button
to switch on the calling.
4.2 Reject call
When a ring comes, press the “ ” button
(40) to reject the coming call.
4.3 End call
c) Dial phone number of menu list:
When you look around the preset number
or received list or dialed list or missed
list, you can dial any phone number on
When you are talking, press the “
button to hang up the current call.
”
the lists by pressing “
” button.
5. Call Transfer
During talking status, you can transfer
talking to private listening on your phone
d) Switch auto or manual answer
Select auto answer or manual answer the
from your car audio by pressing the “
button; press the “ ” button again to get
back to car audio.
”
coming phone by pressing
enter this preset item.
after
20
7. Voice dialing function
If your mobile phone support voice
dialing function, you can dial a phone
number by voice dialing.
Remark:
Please operate the voice dial function
according to your mobile phone manual.
8. A2DP Function
If your mobile phone support A2DP
function ( Advance Audio Distribution
Profile) that it is special designed for
transmitting stereo music to bluetooth
device. You can listen to the music stored
in your mobile phone by this car audio.
The
,
and button are available
in A2DP playback status.
Press the MODE button to switch to other
mode.
Remark:
Please be sure that the distance between
Your mobile phone and car audio is less
3 meters.
21
?
Aim the remote control directly at
Trouble Shooting
the sensor on the front of the player.
? Avoid all obstacles which may interfere
with the signal path.
? Inspect or replace the remote control
battery.
Distorted or B/W Picture
If it appears that your DVD unit is faulty,
first consult this checklist. It may be that
something simple has been overlooked.
Do not try to repair the player by yourself,
as this will invalidate the warranty. Only
qualified service personnel can remove
the cover or service this player.
?
The disc format is not according to
the TV-set used (PAL/NTSC).
No Audio at Digital Output
?
? Check the Digital Audio menu to make
sure that the digital output is correctly
set.
? Check if the audio format of the
selected audio language matches your
receiver's capabilities.
No Power
?
Check the digital connections
If the power supply is connected to
the car accessory circuits, but the engine
is not moving, switch the ignition key to
“ACC”.
? Check if the fuse is blown. Then
replace the new fuse.
? Check if the on/off button on the front of
the player is set to on.
No Picture
? Check if the monitor or TV is
switched on.
? Check if select proper mode, such as
Disc Play mode and AV mode.
? Check the video connection.
Distorted Picture
Buttons Do Not Work
? Press Reset button on the housing
of the DVD unit.
The Radio Does Not Work
Check if the antenna cable is
?
connected firmly.
The Radio Station Automatic Selection
Does Not Work
? If the signals are too weak, select a
station manually.
?
Check the disc for fingerprints and
clean with soft cloth, wiping from centre
to edge.
? Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
Completely Distorted Picture
?
The disc format is not matching up to
the TV-set used (PAL/NTSC).
No Color in Picture
?
The disc format is not matching up to
the TV-set used (PAL/NTSC).
Disc Does Not Play
? Ensure the disc label is upwards.
? Clean the disc.
? Check if the disc is defective by trying
another disc.
No Sound
?
Check audio connections.
? If using a HIFI amplifier, try another
sound source.
Distorted Sound from HIFI Amplifier
?
Check to make sure that no audio
connections are made to the amplifier
phono input.
The Player Does Not Respond To the
Remote Control
22
Specification
1. GENERAL
Power Supply Requirements
DC 12 Volts, Negative Ground
Chassis Dimensions
178(W)x160(D)x 50(H)
Tone Controls
- Bass (at 100 Hz) 10 dB
- Treble (at 10 KHz) 10 dB
Maximum Output Power
4x60 watts
Current Drain
15 Ampere (max.)
2. DVD PLAYER
Signal to Noise Ratio
> 55 dB
Channel Separation
> 40 dB
Frequency Response
20Hz - 20 KHz
3. RADIO
FM
Frequency Coverage
FM: 87.5 - 107.9 MHz
IF
10.7 MHz
Sensitivity (S/N=30dB)
4µV
Stereo Separation
>25dB
AM
Frequency Coverage
530 - 1710 KHz
IF
450 KHz
23
24
|