GE Monogram ZDWC240 User Manual

Owner’s  
Manual  
Wine Chiller  
ZDWC240  
monogram.com  
Consumer Information  
Wine Chiller  
The warranty does not cover damage  
caused after delivery.  
Immediately contact the dealer (or builder)  
that sold you the wine chiller.  
If you  
received a  
damaged  
appliance  
Before using, be sure all packing materials  
and tape have been removed.  
new appliances is an application of  
household liquid detergent. Apply with a soft  
cloth and allow to soak. Wipe dry and then  
apply an appliance polish to thoroughly  
clean and protect the surface.  
Remove  
packaging  
To assure no damage is done to the finish  
of the product, the safest way to remove  
the adhesive left from packaging tape on  
To obtain service, see the Consumer Services For customers in Canada:  
If you need  
service  
page in the back of this manual.  
FIRST, contact the people who serviced your  
appliance. Explain why you are not pleased.  
We are proud of our service and want you  
to be pleased. If for some reason you are not In most cases, this will solve the problem.  
happy with the service you receive, here are  
NEXT, if you are still not pleased, write all the  
steps to follow for further help.  
details—including your phone number to:  
For customers in the USA:  
Manager, Consumer Relations  
Mabe Canada Inc.  
1 Factory Lane, Suite 310  
Moncton, N.B. E1C 9M3  
FIRST, contact the people who serviced your  
appliance. Explain why you are not pleased.  
In most cases, this will solve the problem.  
NEXT, if you are still not pleased, write  
all the details—including your phone  
number—to:  
Manager, Customer Relations  
GE Appliances  
Appliance Park  
Louisville, KY 40225  
• Promptly inspect your new Monogram  
Wine Chiller. If it has been damaged,  
• Test the door swing. Carefully open and  
close the door. The door should not rub  
or catch on adjacent cabinetry. Notify  
the installer if the door makes contact  
with cabinetry.  
After  
installation  
is completed  
contact the Installer or Dealer immediately.  
• This Wine Chiller must be properly leveled  
to ensure correct door alignment and door  
closure. Contact the Installer if the unit is  
not level.  
Please Contact the Installer or Dealer  
if you experience any of these problems.  
• The unit should be centered in the opening. Your Wine Chiller is shipped with a black  
The front face of the door should be 1  
forward of adjacent cabinetry. Contact  
the installer if clearance is not correct.  
toekick on the front of the unit. For shipping  
purposes, an optional stainless steel toekick  
is secured to the back of the unit. That  
toekick should have been removed and  
installed, or given to you. Keep the unused  
toekick and other unused or removed parts  
for possible future use.  
3
IMPORTANT SAFETY INSTRUCTIONS  
READ AND SAVE THESE INSTRUCTIONS  
BEFORE IT IS USED, THE APPLIANCE MUST BE PROPERLY INSTALLED  
AND LOCATED AS DESCRIBED IN THIS MANUAL.  
wDANGER: RISK OF CHILD ENTRAPMENT  
Child entrapment and suffocation are  
Before You Throw Away Your Old  
not problems of the past. Junked or  
abandoned refrigeration products are  
still dangerous…even if they will sit for  
“just a few days.” If you are getting rid of  
your old appliance, please follow these  
instructions to help prevent accidents.  
Refrigeration Product:  
• Take off the doors.  
• Leave the shelves in place so that children  
may not easily climb inside.  
REFRIGERANTS  
All refrigeration products contain  
If you are getting rid of an old refrigeration  
product, check with the company handling  
the disposal about what to do.  
refrigerants, which under federal law must  
be removed prior to product disposal.  
USE OF EXTENSION CORDS  
Because of potential safety hazards under  
However, if you must use an extension  
certain conditions, we strongly recommend cord, it is absolutely necessary that it be a  
against the use of an extension cord.  
UL-listed, 3-wire grounding type appliance  
extension cord having a grounding type plug  
and outlet and that the electrical rating of the  
cord be 15 amperes (minimum) and 120 volts.  
4
IMPORTANTES INSTRUCTIONS DE SÉCURITÉ  
LIRE ET CONSERVER CES INSTRUCTIONS  
AVANT D’ETRE UTILISÉ, L’APPAREIL MÉNAGER DOIT ETRE BIEN INSTALLÉ ET SE  
TROUVER À L’ENDROIT DÉCRIT DANS CETTE MANUEL.  
wDANGER! RISQUES POUR LES ENFANTS  
Les enfants pris au piège ou morts  
Avant de vous débarasser de votre vieux  
d’asphyxie sont toujours d’actualité.  
Les appareils de réfrigération abandonés  
sont toujours aussi dangereux, même  
si on n’attend que “quelque jours” pour  
s’en débarasser. Si vous ne gardez pas  
votre ancien appareil, veuillez suivre les  
directives ci-dessous afin de prévenir  
les accidents.  
appareil de réfrigération :  
• Démontez les portes.  
• Laissez les clayettes en place afin  
d’empêcher les enfants de grimper  
à l’intérieur.  
RÉFRIGÉRANTS  
Tous les appareils de réfrigération  
contiennent des refrigerants qui,  
conformément aux lois fédérales, doivent  
être enlevés avant toute élimination de  
l’appareil.  
Si vous vous débarrassez de vieux appareils  
de réfrigération, vérifiez, auprès de la société  
qui s’occupe de leur élimination, ce que vous  
devez faire.  
CORDONS PROLONGATEURS  
Nous vous recommandons fortement de  
ne pas utíliser de cordons prolongateurs  
à cause des risques potentiels qu’ils  
présentent dans certaines conditions.  
Toutefois si vous décidez d’utiliser tout  
de même un cordon prolongateur, il est  
absolument nécessaire qu’il s’agisse d’un  
cordon à 3 fils avec mise à la terre pour  
appareils électroménagers homologué  
UL (aux États-Unis) ou homologué CSA  
(au Canada), pourvu d’une fiche et d’une  
prise mises à la terre de 15 ampères  
(minimum) et de 120 volts.  
5
IMPORTANT SAFETY INSTRUCTIONS  
HOW TO CONNECT ELECTRICITY  
Do not, under any circumstances, cut  
or remove the third (ground) prong from  
the power cord. For personal safety, this  
appliance must be properly grounded.  
The appliance should always be plugged  
into its own individual electrical outlet which  
has a voltage rating that matches the rating  
plate. This provides the best performance  
and also prevents overloading house wiring  
circuits which could cause a fire hazard from  
overheated wires.  
The power cord of this appliance is equipped  
with a 3-prong (grounding) plug which mates  
with a standard 3-prong (grounding) wall  
outlet to minimize the possibility of electric  
shock hazard from this appliance.  
Never unplug an appliance by pulling on the  
power cord. Always grip the plug firmly and  
pull straight out from the outlet.  
Have the wall outlet and circuit checked  
by a qualified electrician to make sure  
the outlet is properly grounded.  
Repair or replace immediately all power  
cords that have become frayed or otherwise  
damaged. Do not use a cord that shows  
cracks or abrasion damage along its length  
or at either end.  
Where a standard 2-prong wall outlet  
is encountered, it is your personal  
responsibility and obligation to have  
it replaced with a properly grounded  
3-prong wall outlet.  
When moving the appliance, be careful not  
to roll over or damage the power cord.  
SAVE THESE INSTRUCTIONS  
6
IMPORTANTES INSTRUCTIONS DE SÉCURITÉ  
RACCORDEMENT ÉLECTRIQUE  
Ne coupez ni retirez en aucun cas la  
dont la tension nominale est identique à celle  
indiquée sur la plaque signalétique.  
troisième broche (mise à la terre) de la  
fiche du cordon d’alimentation. Pour  
votre sécurité, cet appareil doit être  
correctement mis à la terre.  
Cette précaution est recommandée pour  
garantir un rendement optimum et éviter  
une surcharge des circuits électriques de  
la résidence, ce qui pourrait créer un risque  
Le cordon d’alimentation de cet appareil est  
muni d’une fiche à 3 broches (mise à la terre) d’incendie par surschauffe des fils.  
qui se branche dans une prise mural  
Ne débranchez jamais l’appareil en  
ordinaire à 3 alvéoles (mise à la terre) pour  
tirant le cordon d’alimentation. Saisissez  
réduire au minimum les risques du chocs  
fermement la fiche du cordon et tirez  
électriques.  
droit pour la retirer de la prise.  
Faites examiner la prise de courant et  
Réparez ou remplacez immédiatement tout  
le circuit par un électricien qualifié pour vous  
cordon effiloché ou endommagé. N’utilisez  
assurer que la prise est correctement mise  
pas un cordon fendillé ou présentant des  
à la terre.  
signes d’usure.  
Si la prise murale est du type standard  
Lorsque vous déplacez l’appareil du mur,  
à 2 alvéoles, il vous incombe de la faire  
faites attention de ne pas la faire rouler  
remplacer par une prise à 3 alvéoles  
sur le cordon d’alimentation afin de ne pas  
correctement mise à la terre.  
l’endommager.  
La machine à glaçons doit toujours être  
branché dans sa propre prise de courant,  
CONSERVEZ CES DIRECTIVES  
7
Controls and Features  
Wine Chiller  
The temperature range of the wine chiller is  
from the low forties to the mid sixties.  
Temperatures at the bottom of the cabinet  
will be cooler than temperatures at the top  
of the cabinet.  
Temperature  
control  
Do not install the wine chiller where the  
temperature will go below 55°F (13°C) or  
above 90°F (32°C).  
Position your wine inventory accordingly  
(i.e. white wines in the cooler zones and red  
in the warmer zones).  
The RED WINE setting will provide a storage  
temperature of approximately 55ºF (13ºC),  
which is optimum for the storage for red  
wine.  
To set the control, turn it to the RED WINE  
setting. Once the bottles are loaded, allow  
at least 24 hours before making any  
adjustments to the initial setting.  
The WHITE WINE setting will provide a  
storage temperature of approximately 45ºF  
(7ºC), which is optimum for white wine.  
As with any refrigeration product, there is  
a slight temperature variance at different  
locations within the cabinet.  
The interior light makes it easy to view  
your wine labels and enhances the display  
of your collection.  
position, the light remains on continuously  
for your maximum viewing pleasure. For best  
viewing do not store a bottle on the top shelf  
directly under the light. Remember to turn off  
the light when it is no longer needed.  
Interior light  
and switch  
When the switch is in the OFF position,  
the light comes on only when the door is  
opened. When the switch is in the ON  
All of the full extension drawers pull out  
so bottles can be conveniently added or  
removed.  
Removing  
full extension  
drawers  
Tab (push tab down on  
right drawer guide, pull  
tab up on left drawer  
guide)  
Any of the full extension drawers can be  
removed to store larger bottles.  
To remove:  
1. Pull the full extension drawer out to the  
STOP position.  
2. Push the tab on right drawer guide down  
while pulling the tab on left guide up, and  
pull the drawer out.  
Sub-assembly  
Sub-assembly  
To replace:  
To replace, push drawer slide Pull small slide sub-assembly  
arm back into unit completely forward  
1. Push the drawer slide arm back into  
the unit.  
2. Pull the small slide sub-assembly  
NOTE: Make sure the tabs on the full  
extension drawer guides are fully engaged  
before loading any bottles. Pull the drawers  
out all the way to the STOP position and push  
back in several times to make sure locking  
tabs are properly engaged.  
completely forward.  
3. Insert the sides of the drawer back  
into the guides.  
4. Push until the tabs lock into place.  
8
Operating Instructions  
Wine Chiller  
The top five full extension drawers each  
hold eight bottles, two deep with the necks  
alternating front to back or nine bottles,  
alternating with necks pointing inward.  
The bottom two full extension drawers hold  
six bottles each and are loaded with necks  
facing the rear. Tall bottles should not be  
loaded on the bottom drawer because  
they may prevent the door from closing.  
Insert wine  
bottles  
8 bottle arrangement  
9 bottle arrangement  
Bottom drawer  
The bottles on the top full extension  
Do not allow children to climb, stand or  
hang on the wine chiller full extension  
drawers. They could seriously injure  
themselves and possibly cause damage  
to the wine chiller.  
Loading  
drawer, directly under the light, will be  
exposed to a slightly higher temperature  
when the light is on. Position your wines  
accordingly and remember to turn off  
the light when it is no longer needed.  
tips and  
suggestions  
Keep wines that you plan to use for  
everyday drinking and entertaining on  
the front half of the full extension drawers  
where labels are completely visible. Place  
wines for aging or longer term storage in  
the rear.  
The full extension drawer fronts on the wine  
chiller are unfinished cherry wood. During  
use, oil from hands may accumulate and  
stain the wood.  
Apply the stain and sealer according to  
the manufacturer’s instructions. To avoid  
unpleasant odor, keep the door open to  
ventilate and allow the stain/sealer to dry  
completely before using the product.  
Wood drawer  
fronts  
The drawer fronts may be stained and  
sealed to match adjacent cabinetry. The  
tinted glass will make the stained wood  
appear darker. A true color match can be  
seen only when the door is opened.  
NOTE: Natural wood may vary slightly in  
grain and color.  
9
Care and Cleaning  
Wine Chiller  
Unplug the wine chiller before cleaning.  
Turn the wine chiller unit OFF or unplug  
the unit before cleaning. Use a slightly  
damp cloth or sponge when cleaning  
around switches, lights or controls.  
Other parts of the wine chiller center  
unit—including the door gaskets, and  
full extension drawers—can be cleaned  
the same way.  
Cleaning the  
inside  
Use warm water and baking soda solution—  
about a tablespoon (15 ml) of baking soda  
to a quart (1 liter) of water. This both cleans  
and neutralizes odors. Thoroughly rinse and  
wipe dry.  
Periodically check the drain hole and  
channel for any debris. If the drain is blocked,  
condensation will not drain properly.  
Drain hole  
Drain hole  
To check and clean the drain hole,  
remove the third and fourth drawers  
(see instructions on Removing full extension  
drawers on page 8). Sweep a damp cloth  
along the channel in the back of the wine  
chiller. Use a finger to sweep away any  
debris from the drain hole.  
The exterior surfaces can be washed with  
mild soap and water.  
Cabinet  
Rinse thoroughly with clear water. Never use  
abrasive scouring powders.  
Use a glass cleaner or mild soap and water  
and a soft cloth to clean the glass door.  
Do not use any abrasive powders.  
Avoid cleaning cold glass with hot  
water because the extreme temperature  
difference may cause it to break. Rough  
handling of tempered glass can cause it  
to shatter.  
Glass door  
The vinyl gasket may be cleaned with mild  
soap and water, a baking soda solution or  
a mild scouring powder. Rinse well.  
After cleaning the door gasket, apply a thin  
layer of paraffin wax or petroleum jelly to the  
door gasket at the hinge side. This helps keep  
the gasket from sticking and bending out of  
shape.  
Door gasket  
10  
Care and Cleaning  
Wine Chiller  
Unplug the wine chiller before cleaning.  
Unplug the wine chiller before replacing  
the light bulb.  
Light bulb  
replacement  
To remove the light shield, push in the tab  
on the left side of the shield and lower it.  
Replace with a 15 watt appliance bulb.  
If the power fails, open the door as  
infrequently as possible to maintain  
the temperature. A gradual rise in  
temperature should not have any  
adverse effect on the wine.  
If it is extremely hot, you may want to move  
the wine to the coolest location you can find  
until power is restored.  
In the event  
of a power  
failure  
Do not store or use gasoline or other  
flammable vapors and liquids in the  
vicinity of this or any other appliance.  
11  
Reversing the Door Swing  
Wine Chiller  
Parts included:  
To reverse  
the door  
Install  
3 Hinge  
Screws  
1. Top left case hinge  
2. Bottom left case hinge  
Remove  
Top Hinge  
3. Left and right side decorative  
hinge cover  
4. Decorative hinge screw hole cover  
5. Torx® driver bit  
Hinge  
Pin and  
Bracket  
Door Stop  
and Cam Riser  
Tools required:  
1. Phillips screwdriver  
2. Electric drill  
To remove the door:  
Remove  
Hinge  
1. Flatten the shipping carton to use as  
a pad.  
2. Remove the 2 screws and the toekick.  
Set aside the screws and toekick for final  
installation.  
3. Use the supplied Torx® bit and electric drill  
to remove the 3 screws holding the top  
case hinge. Lift off the hinge. (Screws will  
be used to install the new hinge.)  
3. Place the door onto the bottom case  
hinge.  
4. Install the supplied left-hand top case  
hinge with the 3 original screws.  
5. Select the hinge cover marked with  
an “L”.  
6. Peel backing off the tape inside the  
4. Lift the door off the bottom case hinge.  
decorative hinge cover.  
5. Remove the bottom case hinge pin and  
Install Covers  
7. Press and snap the  
bracket.  
hinge cover into place.  
Rotate the door:  
8. Snap the screw hole  
cover into place on  
the opposite side.  
The handle will be on the right side of the  
door; hinges will be installed on the left side  
of the case.  
Important: Check to be sure screws are tight  
1. Remove the door stop and cam riser on the and that the door is straight and does not  
original bottom right side of the door.  
2. Remove the fill plug on the top right side of NOTE: See Installation Instructions to apply  
the door. hinge cover and screw hole cover.  
sag. The door should swing freely.  
3. Turn the door over and reinstall the fill plug Position nameplate:  
on the new left side.  
Apply the Monogram nameplate on  
To reinstall the door:  
the door using the template included  
in the installation instructions.  
1. Install the original door stop and cam riser  
onto the bottom left side of the door.  
2. Install the new supplied bottom case hinge  
pin and bracket onto bottom left side.  
12  
The Problem Solver  
Wine Chiller  
Newer appliances sound different from older appliances. Modern appliances have more  
features and use newer technology.  
Normal  
operating  
sounds  
Do you hear what I hear? These sounds are normal.  
HUMMM...  
WHOOSH...  
The new high efficiency compressor  
may run faster and longer than your  
You may hear the fans spinning at  
old appliance and you may hear a  
high-pitched hum or pulsating sound  
while it is operating.  
high speeds. This happens when the  
appliance is first plugged in, when the  
door is opened frequently or when large  
amounts of beverages are added to  
the appliance. The fans help maintain  
desired temperatures.  
Sometimes the appliance runs for an  
extended period, especially when the  
doors are opened frequently.  
If the door is open for over 3 minutes, you  
may hear a fan come on in order to cool  
the appliance.  
You may hear a whooshing sound when  
the doors close. This is due to pressure  
equalizing within the appliance.  
The fans change speeds in order to  
provide optimal cooling and energy  
savings.  
CLICKS, POPS,  
WATER SOUNDS  
CRACKS and CHIRPS  
You may hear cracking or popping sounds  
when the appliance is first plugged in. This  
happens as the appliance cools to the  
correct temperature.  
The flow of refrigerant through the  
appliance cooling coils may make a  
gurgling noise like boiling water.  
Expansion and contraction of cooling coils  
during and after defrost can cause  
a cracking or popping sound.  
A water dripping noise may occur as  
water from the evaporator flows into  
the drain pan.  
Closing the drawer may cause a gurgling  
sound due to pressure equalization.  
13  
The Problem Solver  
Wine Chiller  
PROBLEM  
POSSIBLE CAUSE  
Questions?  
Use this  
problem  
solver!  
APPLIANCE  
DOES NOT OPERATE  
• Appliance may be in defrost cycle when motor does not operate for  
about 30 minutes.  
• If interior light is not on, appliance may not be plugged in at  
wall outlet. Push the plug completely into the wall outlet.  
• The fuse is blown/circuit breaker is tripped. Replace fuse or reset  
the breaker.  
VIBRATION OR  
• Adjust the leveling legs as shown in the Installation Instructions.  
RATTLING (Slight  
vibration is normal.)  
MOTOR OPERATES  
FOR LONG PERIODS  
OR CYCLES ON AND  
OFF FREQUENTLY  
• Normal when appliance is first plugged in. Wait 24 hours for the  
appliance to completely cool down.  
• Often occurs when large amounts of beverages are placed in appliance.  
This is normal.  
• Door left open or package holding door open.  
• Hot weather or frequent door openings. This is normal.  
• Temperature control set at the coldest setting.  
See Temperature Control. Allow 24 hours for temperature to change.  
COMPARTMENT  
TOO WARM  
• Temperature control not set cold enough.  
See Temperature Control. Allow 24 hours for temperature to change.  
• Warm weather or frequent door openings.  
• Door left open for long time.  
• Package may be holding door open.  
APPLIANCE  
HAS ODOR  
• Interior needs cleaning. See Care and Cleaning.  
• Keep open box of baking soda in appliance; replace every 3 months.  
DOOR NOT  
CLOSING  
• Door gasket is sticking or folding over. Apply petroleum jelly  
or paraffin wax to the face of the gasket.  
PROPERLY  
• The door is hitting an internal component inside the appliance.  
Adjust interior components to prevent interference.  
MOISTURE FORMS  
ON OUTSIDE OF  
APPLIANCE  
• Not unusual during periods of high humidity. If bothersome,  
wipe surface dry; otherwise, moisture will evaporate in time.  
• Door left open or package holding door open.  
FROST OR MOISTURE  
COLLECTS INSIDE  
• Too frequent or too long door openings.  
• In humid weather, air carries moisture into appliance when door  
is opened. Unit will dissipate moisture in time. If bothersome,  
wipe surface dry.  
• Temperature control set at coldest setting.  
INTERIOR LIGHT  
DOES NOT WORK  
• No power at outlet.  
• Light bulb needs replacing. See Care and Cleaning.  
14  
The Problem Solver  
Wine Chiller  
PROBLEM  
POSSIBLE CAUSE  
Questions?  
Use this  
problem  
solver!  
HOT AIR FROM  
BOTTOM OF  
APPLIANCE  
• Normal air flow cooling motor. In the refrigeration process, it is  
normal that heat be expelled in the area under the appliance.  
Some floor coverings are sensitive and will discolor at these safe  
and normal temperatures.  
APPLIANCE  
• Adaptive defrost keeps compressor running during door openings.  
This is normal. The appliance will cycle off after the door remains  
closed for two hours.  
NEVER SHUTS OFF  
BUT TEMPERATURES  
ARE OK  
• Normal operation in extreme temperatures.  
15  
Wine Storage and Handling Notes  
Wine Chiller  
16  
Wine Storage and Handling Notes  
Wine Chiller  
17  
Appliance Notes  
Wine Chiller  
18  
Consumer Services  
Wine Chiller  
With the purchase of your new Monogram appliance, receive the  
assurance that if you ever need information or assistance from  
GE, we will be there. All you have to do is call—toll-free!  
Whatever your question about any Monogram major appliance, GE Answer Center®  
information service is available to help. Your call—and your question—will be answered  
promptly and courteously. And you can call any time. GE Answer Center® service is open  
24 hours a day, Monday through Saturday.  
GE Answer  
Center®  
In the USA:  
800.626.2000  
OR  
Visit our Website at: monogram.com  
In Canada, call 1.800.561.3344.  
A GE consumer service professional will provide expert repair service, scheduled at a time that’s  
convenient for you. Many GE Consumer Service company-operated locations offer you service  
today or tomorrow, or at your convenience (7:00 a.m. to 10:00 p.m. weekdays, 8:00 a.m. to 6:00 p.m.  
Saturday and Sunday). Our factory-trained technicians know your appliance inside and out—so most  
repairs can be handled in just one visit. In Canada: Monday to Friday, 7:00 a.m. to 8:00 p.m. and  
Saturday, 8:00 a.m. to 5:00 p.m. EDST.  
In-Home  
Repair  
Service  
In the USA:  
800.444.1845  
In Canada:  
1.800.561.3344  
GE offers Braille controls for a variety of GE appliances, and a brochure to  
assist in planning a barrier-free kitchen for persons with limited mobility.  
For  
Customers  
With Special  
Needs…  
Consumers with impaired hearing or speech who have access to a TDD or  
a conventional teletypewriter may call 800.TDD.GEAC (800.833.4322)  
to request information or service.  
In the USA:  
800.626.2000  
You can have the secure feeling that GE Consumer Service will still be there after your warranty  
expires. Purchase a GE contract while your warranty is still in effect and you’ll receive a substantial  
discount. With a multiple-year contract, you are assured of future service at today’s prices.  
Service  
Contracts  
In the USA:  
800.626.2224  
In Canada:  
1.800.561.3344  
Individuals qualified to service their own appliances can have parts or accessories sent directly  
to their home. The GE parts system provides access to over 47,000 parts…and all GE Genuine Renewal  
Parts are fully warranted. VISA, MasterCard and Discover cards are accepted.  
Parts and  
Accessories  
User maintenance instructions contained in this manual cover procedures intended to be  
performed by any user. Other servicing generally should be referred to qualified service  
personnel. Caution must be exercised, since improper servicing may cause unsafe operation.  
In the USA:  
800.626.2002  
In Canada:  
1.800.561.3344  
19  
Warranty  
Wine Chiller  
YOUR MONOGRAM REFRIGERATOR WARRANTY  
Staple sales slip or cancelled check here. Proof of original  
purchase date is needed to obtain service under warranty.  
LIMITED ONE-YEAR WARRANTY  
WHAT IS  
For one year from date of original purchase, we will provide, free of charge, parts and service labor in your home  
to repair or replace any part of the unit that fails because of a manufacturing defect.  
COVERED  
LIMITED FIVE-YEAR WARRANTY  
For five years from date of original purchase, we will provide, free of charge, parts and service labor  
in your home to repair or replace any part of the sealed refrigerating system (the compressor, condenser,  
evaporator and all connecting tubing) that fails because of a manufacturing defect.  
From the Date  
of the Original  
Purchase  
This warranty is extended to the original purchaser and any succeeding owner for products purchased for  
ordinary home use in the 48 mainland states, Hawaii, Washington, D.C. or Canada. If the product is located in an  
area where service by a GE Authorized Servicer is not available, you may be responsible for a trip charge or you  
may be required to bring the product to an Authorized GE Service location for service. In Alaska the warranty is  
the same except that it is LIMITED because you must pay to ship the product to the service shop or for the  
service technician’s travel costs to your home.  
All warranty service will be provided by our Factory Service Centers or by our authorized Customer Care®  
servicers during normal working hours.  
Should your appliance need service, during warranty period or beyond, in the USA call 800.444.1845. In Canada:  
800.561.3344. Please have your serial number and model number available when calling for service.  
• Service trips to your home to teach you how  
to use the product.  
• Replacement of house fuses or resetting of circuit  
breakers.  
• Damage to the product caused by accident, fire,  
floods or acts of God.  
• Improper installation, delivery or maintenance.  
WHAT IS NOT  
COVERED  
If you have an installation problem, contact  
your dealer or installer. You are responsible for  
providing adequate electrical, plumbing and  
other connecting facilities.  
• Replacement of the light bulbs, if included.  
• Failure of the product if it is used for other than its • Loss of food due to spoilage (in the USA only).  
intended purpose or used commercially.  
• Damage caused after delivery.  
• Incidental or consequential damage caused  
by possible defects with this appliance.  
• Product not accessible to provide required  
service.  
EXCLUSION OF IMPLIED WARRANTIES—Your sole and exclusive remedy is product repair as provided in  
this Limited Warranty. Any implied warranties, including the implied warranties of merchantability or  
fitness for a particular purpose, are limited to one year or the shortest period allowed by law.  
Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the  
above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may  
also have other rights which vary from state to state/province to province. To know what your legal rights are in  
your state/province, consult your local or state/provincial consumer affairs office or your state’s Attorney General.  
Warrantor in USA: General Electric Company,  
Louisville, KY 40225  
Warrantor in Canada: Mabe Canada Inc.,  
Burlington, Ontario  
GE Consumer & Industrial  
Appliances  
General Electric Company  
Louisville, KY 40225  
ge.com  
197D4615P005  
49-60429-1  
08-07 JR  
Printed in Slovenia  

Alpine Electronics Car Stereo System CDE 110 User Manual
Canon Camcorder PC980 User Manual
Gitzo GT2940LVL User Manual
H2O Audio Oceanic DV Series D2 1C1 User Manual
Hamilton Beach Thermos 840112800 User Manual
Hitachi DZMV270A User Manual
Hypertec N15858NHY User Manual
JVC Car Video System TM A13UCV User Manual
JVC GET0634 010A User Manual
JVC GR SXM347UM User Manual