ESN E5 6.5" Wide TFT Touch-Panel Display CD / DVD Multi-Source Receiver with DVD Navigation
MODEL
INSTALLATION MANUAL
Be sure to read this installation manual thoroughly before carrying out installation and making
connections. If installation methods or non-standard parts that are not specified in this installation
manual are used, accidents or injury may result.
Professional installation is recommended, contact the place of purchase to schedule an appointment.
After reading the owner's manual and the installation manual thoroughly, keep them in a safe place for
later reference.
To dealers:
Give this installation manual to the customer after installation and connections have been completed.
Contents
Components
2
Before
installation
For your safety in using the AVN5435
Installation Diagram
3
5
Names and functions of terminals
6
10
13
Connections
Installation
Connecting the vehicle speed pulse signal, parking brake signal cable and reverse cable
System connection example
Installing the GPS antenna
Installing the main unit
14
17
For your safety in using the AVN5435
Warnings and caution signs, illustrated bellow, are posted throughout this manual as well as on the
AVN5435. They show safe and correct ways to handle the product so as to prevent personal injury to you
and others and avoid damage to property.
Before reading through the manual, take time to read through and learn the important information listed in
this section.
This sign indicates a situation in which incorrect handling through disregard
of a sign might result in death or serious personal injury.
This sign indicates a situation in which incorrect handling through disregard of a sign
might result in personal injury or may result solely in damage to property.
This section contains information that can help to prevent problems and
Tip
damage to the unit, and also contain other useful information.
• Do not install this product in locations where it may
• Never supply power to another electrical appliance
obstruct the driver's view, or where it may endanger
passengers in the vehicle. Otherwise, an accident or
injury may result.
by splicing or tapping into this product's power lead
(wire). Otherwise, the current capacity of the wire will
be exceeded, resulting in a fire or electric shock.
• Do not install this product in locations where it may
• Never attempt to disassemble or modify the product.
interfere with the operation of the steering wheel,
shift lever, brake pedal, etc. Otherwise, an accident
or injury may result.
Otherwise, an accident, fire or electric shock may
result.
• When replacing fuses, be sure to use fuses of the
• To prevent damage to the vehicle, confirm the
specified capacity (amperage). Otherwise, damage
to the unit, fire or an electric shock may result.
locations of hoses, electrical wiring, and the fuel tank
prior to drilling holes to install this product. Also, take
care so that the product does not interfere, nor come
in contact with them. Otherwise, a fire may result.
• When installing the product into a vehicle with a
passenger side air bag, do not secure it to the air
bag's cover or in places where it may impede air bag
deployment. Otherwise, proper air bag operation may
not be ensured in the event of an accident, causing
injury or death.
• When installing this product, never use the existing
nuts or bolts that secure parts of the fuel tank, or the
steering or braking systems. Otherwise, improper
steering or braking or a fire may result.
• When making holes using drill or similar tool, be sure
• To prevent a short circuit from occurring, disconnect
to wear protective eyewear. Otherwise, an injury
such as loss of eyesight may result.
the battery's negative terminal before installing this
product. Otherwise, an electric shock or injury may
result.
• Exposed wires must be insulated with electrical tape.
Otherwise, a short circuit, fire, or electric shock may
result.
• When using an existing nut and/or bolt from the
vehicle to ground this product, do not use any that
secure parts of the steering or braking systems.
Otherwise, an accident may result.
• Do not modify this system for use other than that
specified herein. Also, do not deviate from the
installation procedures described herein; Eclipse will
not be held liable for damages including, but not
limited to serious injury, death or property damage
resulting from installations that enable unintended
operation.
• Bundle cables and harnesses with electrical tape or
wire ties to prevent them from interfering with moving
parts. If they should entangle with the steering wheel,
shift lever or brake pedal, an accident may result.
- -
3
• This unit is intended for operation in DC 12volt,
• Do not operate the product in a malfunctioning
negative-grounded vehicles only. Never use it in 24-
volt vehicles such as heavy trucks or diesel cars with
cold-region specifications.
condition, for instance, when the audio does not play.
Doing so may result in an accident, fire or electrical
shock.
• Do not place the vinyl storage bag over a person. It
• If an abnormal situation occurs, such as foreign
may cause a serious accident or death by
suffocation.
matter entering or liquid splashing on the product, or
smoke or a strange odor emitting from the unit, shut
off the product immediately and consult the dealer
from whom you purchased it. Continued operation
may cause an accident, fire or electrical shock.
• Do not disassemble or rebuild this product. Doing so
may cause an accident, fire or electrical shock.
• When it is necessary to replace the fuse, always use
a fuse of the correct rating (number of amperes). Use
of fuses with higher amperage ratings may cause a
fire.
• For best results, this product should be installed by a
professional installer.
• When routing cables, use care so that they do not
contact sharp metal parts such as brackets or screw
tips. Otherwise, a short circuit, electric shock, fire or
accident may result.
Contact the dealer whom you purchased the product
for an appointment.
• When installing this product, be sure to use the
• Play the audio at a moderate volume level that
supplied mounting hardware. If parts other than
those supplied are used, the unit may be damaged
internally, or may not be held in place securely and
become dislodged.
permits you to hear sounds from outside the car.
Driving without being able to hear outside sounds
may result in an accident.
• This product must be operated only as on-board
equipment, or it may cause electrical shock or injury.
• Avoid installing this product in places where it may
get wet, such as near windows, or in places that are
moist or dusty. Presence of liquid, moisture or dust
inside this product can cause short circuiting
resulting in smoke or fire.
• Do not play distorted sounds for long periods of time;
the speakers may overheat and cause a fire.
• If this product is not connected properly, a short
circuit, fire or accident may occur.
- -
4
Installation Diagram
10
GPS antenna
(When installing inside the vehicle)
Tip
10
GPS antenna
(When installing outside the vehicle)
Main unit
1
Tip
• If installing the GPS antenna inside the vehicle, the location and the slope of the vehicle's windshield
will determine the accuracy of the GPS antenna to receive the GPS signal. If this occurs you may want
to install the antenna outside of the vehicle.
• The materials used in front and rear vehicle windows can cause GPS reception sensitivity to drop
significantly. If this happens, install the GPS antenna on the outside of the vehicle.
- -
5
Names and functions of terminals
• Never cut the insulation on the power cable or use it to power any other equipment. If the rated current
capacity of the power cable is exceeded, fire and electric shocks may result.
• The cables should be secured with tape or similar so that they will not cause an obstruction while
driving. If they get wound around components such as the steering wheel, shifting lever or brake pedal,
accidents may result.
GPS ANTENNA
10
H
MAIN UNIT
1
Antenna extension cable
5
Be sure to use when connecting
the radio antenna to the vehicle
if the oem antenna cable is too
short.
ANTENNA PLUG
6P
INTERCONNECTING CABLE
(Video input connector)
4
G
9
F
10
11
12
10P
E
D
C
1
2
B
3
A
4
13P
5
6P
6
8
7
INTERCONNECTING
CABLE
2
(Power and front
speaker connector)
INTERCONNECTING CABLE
(Rear speaker connector)
3
Tip
• Refer to page 7 for details on the wire colors and connection points for interconnecting cables
, and
2
and
.
3
4
• Refer to page 8 for details on connection points
,
,
,
,
, and
A
B
C
D
E
H
for the main unit cables and terminals.
- -
6
Wire colors and connection points for connection cables
and
and
2
3
4
Never connect the power supply to the speaker leads (No.6 and No.7),
otherwise it will cause damage to the main unit.
Caution
1
B+ (Yellow)
Connect where power is constantly available, regardless of the ignition key's position.
2
ACC (Red)
Connect where the power comes on when the ignition is in the ACC position.
3
Illumination power supply (Orange/White)
Connect to where power comes on when the vehicle light switch is turned on.
4
Antenna power supply (Blue)
Connect to the automatic-antenna control terminal of the vehicle.
5
Control power supply (Blue/White)
Connect the control terminal for the external amplifier, etc.
6
Front speaker output leads
Connect to the front speakers.
White: Left +
Gray: Right +
White/black:
Gray/Black:
Left -
Right -
7
Rear speaker output leads
Connect to the rear speakers.
Green: Left +
Green/black:
Purple/Black:
Left -
Purple: Right +
Right -
8
Ground (Black)
Connect where good body grounding is available.
F
Genuine steering remote control terminal
Connect to the vehicle steering remote control.
Compatible vehicle models for installation : Vehicles with voltage detection-type steering remote control.
Ask your dealer for details.
※
G
VCR external input terminal (6P)
Connect to the output cable of external video equipment such as a VCR.
- -
7
Main unit connections
9
ACC ON/OFF power supply terminal (blue/white)
If you use this terminal to connect equipment such as an external amplifier, you can still hear the audio guidance
from the navigation system even when audio is turned off. Connect it to the control terminal for the external
amplifier or other equipment.
A popping noise may be heard when the engine is being started or the ignition switch is at the ON position, but
this is normal and is not the sign of a malfunction.
※
10
Vehicle speed pulse signal terminal (Purple/White)
Connect to the vehicle speed pulse signal terminal.
11
Parking brake signal (Red/White)
Connect to the parking brake signal terminal.
12
Reverse signal Wire (Green)
Connect the reverse signal output of the vehicle to this terminal.
E-LAN terminal (13P)
A
Connect to the E-LAN terminal of the CD changer, etc.
VIDEO OUT terminal (Yellow)
Connect to an external monitor with video input.
B
Front line-out terminal
C
Connect to the RCA connector of an external amplifier.
Rear line-out terminal
Connect to the RCA connector of an external amplifier.
D
Line-out terminal (Non fader)
E
This is used for non fader output. It can be used as a sub-woofer terminal if a separate amplifier with
a low bass filter is connected.
Back-eye camera external input terminal (4P)
H
Used with the Eclipse back-eye camera (sold separately).
- -
8
-
Vehicle connections
-
Tip
• You will need to purchase the necessary component adapter cable for the vehicle so that the power
supplies can be utilized. (Contact the dealer for further details.)
• Be sure to wrap the connection cables with plastic tape to insulate them.
-
Example of using vehicle adapter cables
-
Vehicle harness
From main unit
Vehicle component adapter cable
- -
9
Connecting the vehicle speed pulse signal,
parking brake cable and reverse cable
Notes on installation
• Check the vehicle speed pulse signal, parking brake signal and reverse signal carefully before making
the connections. If the cables are incorrectly connected, accidents or problems with correct operation
may result.
• The label on the vehicle speed pulse signal cable contains a protection circuit, so do not cut the cable
or remove the protective circuit, otherwise problems with operation may result.
• Bind the cables together with tape so that they do not cause an obstruction while driving. If they
become wound around parts such as the steering wheel, shifting lever or brake pedal, accidents may
result.
Tip
The locations where the vehicle speed pulse signal cable, parking brake signal cable and reverse cable
come out vary depending on the vehicle model and grade. Ask the place of car dealer or your nearest
Eclipse dealer for details.
-
An example for connecting the vehicle speed pulse signal cable
-
Tip
Always be sure to connect the vehicle speed
pulse, otherwise the measurement precision will
Vehicle speed pulse
signal cable (vehicle harness)
be greatly reduced.
Engine computer
Use a splicing connector to connect the vehicle
speed pulse signal cable (purple/white) coming
from the main unit to the vehicle speed pulse
signal cable of the vehicle.
1
2
Route the vehicle speed pulse signal cable to the
main unit.
Vehicle speed pulse
signal cable
(purple/white) of
connection cable
Splicing connector
8
Contain a protective circuit so
never remove.
- -
10
-
An example for connecting the parking brake signal
-
Use a splicing connector to connect the parking
brake signal cable (red/white) coming from the
main unit to the parking brake signal cable of the
vehicle.
1
Route the parking brake signal cable to the main
unit.
2
Hand-operated
Parking brake
Position to attach
a splicing connector
Parking brake
Signal Cable
Parking brake
signal cable
Foot-operated
Parking brake
-
An example for connecting the reverse signal cable
-
Tip
• Be sure to connect the reverse signal cable. If it is
not connected, the vehicle position may be
incorrect when the vehicle is reversed.
• Use a circuit tester to confirm that a sensing
voltage of 6 V or higher is generated when the
vehicle is reversed.
Use a splicing connector to connect the reverse
signal cable (green) coming from the main unit to
the reverse signal cable of the vehicle.
1
2
Position to attach
a splicing connector
Reverse lamp
Route the reverse signal cable to the main unit .
Reverse signal cable
Reverse signal cable
- -
11
-
Using the splicing connector
-
Insert the connection cable [vehicle speed pulse
signal cable (purple/white), parking brake signal
cable (red/white) or reverse signal cable (green)]
from the main unit and the vehicle cable into the
splicing connector.
1
Vehicle speed pulse signal cable
(purple/white), parking brake cable
(red/white) or reverse cable (green)
Harness in the car
Push in the terminal (the metal part) of the
splicing connector using a pair of pliers.
2
Splicing connector
8
Press down the cover of the splicing connector
and squeeze it until it locks.
3
Lock
Splicing connector
8
- -
12
System connection example
•
Never cut the insulation on the power cable or use it to power any other equipment. If the rated current
capacity of the power cable is exceeded, fire and electric shocks may result.
•
The cables should be secured with tape or similar item so it will not cause an obstruction while driving.
If they get wound around components such as the steering wheel, shifting lever or brake pedal,
accidents may result.
Tip
• Install and connect all of the peripheral units before connecting them to the main unit.
• Do not remove the caps of pin jacks unless in use.
• Be sure to wrap the connection cables with plastic tape to insulate them.
BEC104
(sold separately)
GPS ANTENNA
10
4
4P
INTERCONNECTING CABLE
(Video input connector)
6P
MAIN UNIT
1
FROM EXTERNAL VIDEO EQUIPMENT
1P
TO STEERING REMOTE
CONTROL
ANTENNA EXTENSION CABLE
Be sure to use when connecting the
radio antenna to the vehicle.
5
ANTENNA
PLUG
10P
FRONT
REAR
NON FADER
(remove covers when using external amplifier)
TO MONITOR
13P
6P
FRONT
SPEAKERS
TO GROUND
INTERCONNECTING
CABLE
(Power and front
speaker connector)
2
REAR
SPEAKERS
INTERCONNECTING CABLE
(Rear speaker connector)
3
CH3083
(sold separately)
POWER CONNECTOR CABLE
(Supplied with CD changer)
13P
TO BATTERY+12V
(Permanent Supply)
2P
DIN CABLE
(Supplied with CD changer)
TO GROUND
- -
13
Installing the GPS antenna
Notes on installation
• The cables should be bound together with tape or similar so that they do not interfere with driving. If it
becomes wound around parts such as the steering wheel, shifting lever or brake pedal, accidents may
result.
• Do not install the GPS antenna where it will obstruct the driver's vision or where it will be an obstacle
while driving, otherwise traffic accidents may result.
Tip
• If installing the GPS antenna inside the vehicle, be
sure it is mounted to the ground plate.
• The GPS antenna should be installed in a level
position where the signals will be as unobscured as
much as possible, such as on the vehicle's roof.
Satellite signals cannot be received if the antenna is
obscured.
• If installing the GPS antenna inside the vehicle, the
location and the slope of the vehicle's windshield will
determine the accuracy of the GPS antenna to
receive the GPS signal. If this occurs you may want
to install the antenna outside of the vehicle.
• If installing the GPS antenna outside the vehicle,
remove the main antenna unit if leaving the vehicle
unattended for long periods in order to prevent theft
or malicious damage to the antenna.
• The materials used in front and rear vehicle windows
can cause GPS reception sensitivity to drop
• Hold the main antenna unit when removing the
significantly. If this happens, install the GPS antenna
on the outside of the vehicle.
antenna. Do not pull on the cable, otherwise it may
become damaged and result in problems with correct
operation.
• If the attachment surface is a non-plastic surface
such as genuine leather, wood panel or cloth,
attaching the antenna may damage the surface
finish. Do not attach the ground plate to such
surfaces.
• If installing the GPS antenna outside the vehicle,
remove the main antenna unit when washing the
vehicle. (If you wash the vehicle with the main
antenna unit still attached, avoid spraying the cable
section directly with water so that no water gets
inside the vehicle.)
• Wipe the installation surface thoroughly so that it is
clear of any dirt, moisture or grease before installing
the antenna.
• The magnet that is attached to the GPS antenna is
• Do not apply any coatings to the GPS antenna,
extremely strong. Be sure to note the following when
installing the antenna.
otherwise it may cause a drop in the reception
sensitivity of the antenna.
•
•
Do not put the antenna down on the ground or on
dirty or dusty surfaces. If iron filings become
attached to the magnet, they may cause damage
to the vehicle's body.
• Route the GPS antenna cable as far away as
possible from TV and radio antennas and cables,
otherwise it may cause interference with video and
audio signals.
Keep the antenna away from watches and
magnetic cards, otherwise they may be damaged
and/or rendered unusable.
• Do not install the antenna in places (such as front
pillars and roof panel) that are shielded from the sky.
- -
14
-
Installation inside the vehicle (example)
-
Choose an installation location on the dashboard
which is flat and has a clear view of the sky.
1
Tip
Ground plate
12
GPS antenna
10
Select a location that is at least 19.68 in. away
from the main unit. If this is not done, the GPS
measurement precision will drop.
Install the ground plate to the dashboard.
Install the GPS antenna to the ground plate.
2
3
Tip
Front of vehicle
Tip
If installing the GPS antenna inside the vehicle, the installation location and the shape of the vehicle's
body determine GPS accuracy. Accuracy is usually lower when the GPS antenna is installed inside
the vehicle.
Secure the GPS antenna cable with clamps.
4
5
Tip
Route the GPS antenna cable along the crevice
Tape
GPS antenna
10
between the front windshield and the dashboard.
Clamp
(metal)
14
Tip
10 GPS antenna cable
If the GPS antenna cable protrudes from the
dashboard, wind tape around it so that it stays
securely fixed in the crevice between the front
windshield and the dashboard.
Front of vehicle
Route the GPS antenna to the main unit
installation position.
6
Clamp
14
Harness fixing tape
16
Tip
Cut the harness fixing tape into usable lengths
with scissors. Do the same for the rest of the
installation.
- -
15
-
Installation outside the vehicle (example)
-
Choose an installation location where the GPS
antenna can be attached securely.
1
GPS antenna
10
Remove the backing paper from the body
protective sheet and attach the sheet to the
vehicle.
2
3
Body protective
sheet (clear)
13
Install the GPS antenna on top of the body
protective sheet.
Front of vehicle
Route the GPS antenna cable inside the vehicle's
trunk and secure it with clamps.
4
5
Clamp
(metal)
14
Waterproof cushion
11
Attach the waterproof cushion so that the GPS
antenna cable is flat against the weatherstrip
when the trunk lid is closed.
Tip
Apply plain water or soapy water to the
Front of vehicle
15
Cable tie
(long)
waterproof cushion when moving it.
Route the GPS antenna cable while securing it
with cable ties.
6
7
Weatherstrip
Route the GPS antenna cable to the main unit
while securing it with harness fixing tape.
Tip
Cut the harness fixing tape into usable lengths
with scissors. Do the same for the rest of the
installation.
Front of vehicle
Harness fixing tape
16
Route to
main unit
- -
16
Installing the main unit
-
Installation angle
-
Tip
Front
To maintain proper function, the unit must be
mounted less than 30 degrees. If the angle is in
excess of 30 degrees, DVD/CD skipping or
ejection may occur.
30˚ or less
Level (reference)
-
Mounting the main unit (example)-
Tip
Connect all cables before installing the main
unit.
Center cluster panel
Pocket, etc
1
2
Remove the pocket and any other accessories
from the center cluster to make room for the main
unit.
Remove the mounting brackets for the pocket.
Mounting bolts
3
4
Attach the brackets to the main unit.
Install the main unit in the vehicle.
Main unit
1
Hex-head bolt
(Red:M5 x 8) x 8
6
Tip
Be sure to use the accessory screws (M5x8) to
Mounting bracket
install.
Hex-head bolt
Flathead
screw
6
7
(Red:M5 x 8) x 8
(Red:M5x8) x 8
Select the screws in accordance with the shapes
of the screw holes in the mounting bracket.
- -
17
- -
18
- -
19
“ECLIPSE” is a registered trademark of
FUJITSU TEN LIMITED in 48 countries
including the U.S. and Japan.
090003-28120700
0412DE (CN)
- -
20
|