Quick Start Guide
1
2
3
First Time Turn ON
and Pairing
The SUPERTOOTH 3 will then
ask you to pair your phone.
BlueAnt
On your phone bluetooth
BlueAnt
Confirm language selection by
pressing the green button as
soon as your language is
menu, search for
devices and select
BlueAnt ST3 then enter
0000 as pincode.
Press the green button until
the LED will blinks red/blue.
spoken on the SUPERTOOTH 3.
4A
4B
In case your phone doesn’t support automatic
transfer (dont press the red key of your
SUPERTOOTH 3), go to your phones
“Contact Menu”, then select:
BlueAnt
1) OPTION
2) Mark all
3) Option
if available
4) Send or Send Business card
5) Via Bluetooth
6) Select BlueAnt ST3
Phonebook transfer will be initiated. Accept any
connection request on your phone if prompted.
Then wait until SUPERTOOTH 3 says:
BlueAnt
Note: Blackberry and Smart phone owners please refer to
“BlueAnt ST3 ready, connected to phone.”
section F of user guide.
5A
5B
Activation of Voice Answer:
Deactivation of Voice Answer:
“Voice Answer
“Voice Answer
Enabled”
Disabled”
Press VOL + for 5 seconds
Press VOL - for 5 seconds
until the SUPERTOOTH 3
until the SUPERTOOTH 3
confirms this mode.
confirms this mode.
BlueAnt
BlueAnt
NOTE: Voice activation or deactivation is possible only if you’re not on call.
6
7
Manual Answer
End / Reject Call
BlueAnt
BlueAnt
Press the green button
to answer incoming call.
Press the red button
to end or reject a call.
8
Voice Answer (if option is activated)
After the BEEP, say clearly
one of the words below:
“Call from John. (BEEP)”
“ACCEPT CALL”
“ACCEPT”
“ANSWER”
“OK”
BlueAnt
“OK”
IMPORTANT: Voice answer will not work if you don’t wait for the BEEP.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by BlueAnt Wireless is under license.
|