Radio CD
Kiel CD36
Malaga CD36
7 646 050 510
7 646 065 510
Operating instructions
CONTROLS
1
2
Button to switch the device on/
off and operate the volume
mute function.
;
BND•TS button
Short press: Select the FM
memory banks and the MW
and LW wavebands (MW/LW
only on the Malaga CD36).
Long press: Start the Travel-
store function.
SRC
button
Short press: Switch sources be-
tween CD, CD changer (if con-
nected) and AUX.
Long press: Briefly display the
clock time.
3
button to eject a CD from the
device.
4
5
6
Volume control
CD compartment
TRAF RDS button
Short press: Switch traffic-infor-
mation standby on/off.
Long press: Switch the RDS
function on/off.
7
8
Arrow buttons
MENU button
Short press: Open the settings
menu.
Long press: Start the scan func-
tion.
9
:
AUDIO button to adjust the
bass, treble, balance and fader.
To select an equalizer preset.
To activate, deactivate and ad-
just the X-BASS function.
Keys 1 - 6
25
CONTENTS
Traffic announcements in
CD mode ..................................... 38
Ejecting a CD .............................. 39
Notes and accessories ......... 27
Switching on/off ................... 28
Adjusting the volume............ 29
Setting the power-on volume........ 29
Quick volume reduction (mute) .... 30
Switching the confirmation beep
on/off ........................................... 30
Mute while telephoning ................ 30
CD-changer mode ................ 39
Switching to CD-changer mode ... 39
Selecting CDs ............................. 39
Selecting tracks ........................... 39
Fast searching (audible)............... 39
Configuring the display ................ 40
Repeating individual tracks or
whole CDs (REPEAT) .................. 40
Random track play (MIX).............. 40
Scanning all the tracks on all the
Radio mode........................... 31
Adjusting the tuner settings.......... 31
Switching to radio mode .............. 31
RDS functions.............................. 31
Selecting the waveband /
memory bank ............................... 32
Tuning into a station ..................... 32
Setting the sensitivity of station
seek tuning .................................. 32
Storing stations ............................ 33
Storing stations automatically
(Travelstore) ................................. 33
Listening to stored stations .......... 33
Scanning receivable stations
CDs (SCAN) ............................... 40
Pausing playback (PAUSE) .......... 41
CLOCK time .......................... 41
Displaying the clock time ............. 41
Setting the clock time .................. 41
Selecting 12/24-hour clock mode .. 41
Displaying the time continuously
when the device is off and the
ignition is on................................. 42
Briefly displaying the time when
the device is switched off............. 42
(SCAN)........................................ 33
Setting the scanning time............. 34
Programme type (PTY) ................ 34
Optimising radio reception ........... 35
Configuring the display ................ 35
Sound.................................... 42
Adjusting the bass ....................... 42
Adjusting the treble ...................... 42
Setting the left/right volume
distribution (balance).................... 43
Adjusting the front/rear volume
Traffic information ................ 36
CD mode ............................... 37
Switching to CD mode................. 37
Selecting tracks ........................... 37
Fast track selection...................... 37
Fast searching (audible)............... 37
Random track play (MIX).............. 37
Scanning tracks (SCAN) ............. 38
Repeating tracks (REPEAT) ......... 38
Pausing playback (PAUSE) .......... 38
Configuring the display ................ 38
distribution (fader)........................ 43
Equalizer presets ......................... 43
X-BASS ................................. 44
Configuring the level display .. 44
External audio sources ......... 45
Specifications ....................... 45
26
NOTES AND ACCESSORIES
Road safety
Notes and accessories
Road safety has absolute pri-
ority. Only operate your car sound
system if the road and traffic condi-
tions allow you to do so. Familiar-
ise yourself with the device before
setting off on your journey.
You must always be able to hear
police, fire service and ambulance
sirens in good time from inside your
vehicle. For this reason, listen to
your car sound system at a moder-
ate volume level during your jour-
ney.
Thank you for choosing a Blaupunkt
product. We hope you enjoy using this
new piece of equipment.
Please read these operating instruc-
tions before using the equipment for
the first time.
The Blaupunkt editors are constantly
working on making the operating in-
structions clearer and easier to under-
stand. However, if you still have any
questions on how to operate the de-
vice, please contact your dealer or the
telephone hotline for your country. You
will find the telephone number printed
at the back of this booklet.
Installation
If you want to install your car sound
system yourself, please read the instal-
lation and connection instructions that
follow these operating instructions.
We provide a manufacturer guarantee
on our products bought within the Eu-
ropean Union. You can view the guar-
or ask for them directly at:
Optional equipment
(not part of the scope of delivery)
Blaupunkt GmbH
Hotline
Robert Bosch Str. 200
Use only accessories approved by
Blaupunkt.
D-31139 Hildesheim
Gerrmany
Remote control
The steering wheel and/or handheld re-
mote control allows you to access the
most important functions of your car
sound system safely and convenient-
ly.
Disposal of old unit
(EU countries only)
Do not dispose of your old device
in the household trash!
You cannot switch the device on/off us-
ing the remote control.
Use the return and collection systems
available to dispose of the old device.
You can find out from your Blaupunkt
dealer or on the Internet at www.
blaupunkt.com which remote controls
can be used with your car sound sys-
tem.
27
ACCESSORIES
SWITCHING ON/OFF
Amplifiers
Switching on/off
You can use all Blaupunkt and Veloci-
ty amplifiers.
You can switch the device on/off in the
following ways:
CD changers
Switching on/off using the vehicle
ignition
You can connect the following Blau-
punkt CD changers:
CDC A 08, IDC A 09 and CDC A 03.
If the device is correctly connected to
the vehicle’s ignition and it was not
switched off using button 1, it will
switch on/off simultaneously with the
ignition.
Switching on/off using button 1
➮ To switch on the device, press
button 1.
➮ To switch off the device, press and
hold down button 1 for longer
than two seconds.
The device switches off.
Note:
G
To protect the vehicle battery, the
device will switch off automatically
after one hour if the ignition is off.
Switching on by inserting a CD
If the device is switched off and there
is no CD present in the drive,
➮ gently push the CD with its printed
side uppermost into the drive 5
until you feel some resistance.
The drive draws in the CD automati-
cally.
You must not hinder or assist the drive
as it draws in the CD.
The device switches on and starts play-
ing the CD.
28
SWITCHING ON/OFF
ADJUSTING THE VOLUME
Adjusting the volume
You can adjust the volume in steps
from 0 (off) to 66 (maximum).
Note:
G
If the vehicle ignition was switched
off before you inserted the CD,
you will first have to switch on the
device by pressing button 1 in
order to start playing the CD.
To increase the volume,
➮ turn the volume control 4 clock-
wise.
To decrease the volume,
➮ turn the volume control 4 anti-
clockwise.
Setting the power-on volume
Note:
G The device is equipped with a
timeout function. If, for instance,
you press the MENU button 8
and select a menu item, the de-
vice will switch back approx. 8
seconds after the last button was
pressed. Any changes to the set-
tings that you have made will be
saved.
You can set the power-on volume.
➮ Press the MENU button 8.
➮ Press the or button 7 re-
peatedly until “ON VOLUME” ap-
pears in the display.
➮ Adjust the power-on volume using
the
buttons 7.
To help you adjust the setting more
easily, the device will increase or de-
crease the volume as you make your
changes.
If you change the setting to “LAST
VOL”, the volume level that was set the
last time you switched off the device
will be activated again.
29
ADJUSTING THE VOLUME
Note:
Switching the confirmation
beep on/off
G
To protect your hearing, the pow-
er-on volume is limited to a value
of “38”. If the volume level was
higher than this when the device
was last switched off and the
“LAST VOL” setting is activated,
the system will reset the volume to
“38” when you switch the device
on again.
The system will play a confirmation
beep for some functions if you keep a
button pressed down for longer than
two seconds, for instance, when you
assign a radio station to a station but-
ton. You can switch the beep on/off.
➮ Press the MENU button 8.
When you have finished adjusting the
setting,
➮ Press the or button 7 re-
peatedly until “BEEP ON” or
“BEEP OFF” appears in the dis-
play.
➮ press the MENU button 8 twice.
Quick volume reduction (mute)
You can quickly decrease the volume
(mute) to a level preset by you.
➮ Adjust the beep setting using the
buttons 7. “OFF” means the
beep is switched off and “ON”
means the beep is switched on.
➮ Briefly press button 1.
When you have finished adjusting the
setting,
“MUTE” appears in the display.
Cancelling mute
➮ press the MENU button 8.
To return to your previously set volume
level,
Mute while telephoning
If your device is connected to a mobile
telephone, the car radio’s volume will
be muted as soon as you “pick up” the
telephone. This requires that the mo-
bile telephone be connected to the de-
vice as described in the installation in-
structions.
➮ briefly press button 1 again.
Setting the mute level
You can adjust the mute level.
➮ Press the MENU button 8.
➮ Press the or button 7 re-
peatedly until “MUTE LVL” ap-
pears in the display.
“PHONE” appears in the display.
➮ Adjust the mute level using the
buttons 7.
When you have finished adjusting the
setting,
➮ press the MENU button 8 twice.
30
RADIO MODE
Switching to radio mode
Radio mode
If you are in CD, CD-changer or AUX
mode,
This device is equipped with an RDS
radio receiver. Many of the receivable
FM stations broadcast a signal that not
only carries the programme but also
additional information such as the sta-
tion name and programme type (PTY).
➮ press the BND•TS button ;
or
➮ press the SRC
button 2 re-
peatedly until the memory bank
(e.g. “FM1”) appears in the display.
The station name appears in the dis-
play as soon as the tuner receives it.
RDS functions
Adjusting the tuner settings
The convenient RDS functionsAF (Al-
ternative Frequency) and REGIONAL
extend your radio’s range of functions.
To ensure that the tuner works proper-
ly, the device must be configured for
the region in which you are using it.
You can choose between Europe (EU-
ROPE), United States (USA), South
America (S-AMERICA) and Thailand
(THAI). By default, the tuner is set to
G AF: If the RDS function is activat-
ed, the radio automatically tunes
into the best receivable frequency
for the station that is currently set.
the region in which the device was sold. G REGIONAL: At certain times,
If you encounter problems with radio
reception, please check this setting.
some radio stations divide their
programme into regional pro-
grammes providing different con-
tent. You can use the REG func-
tion to prevent the car radio from
switching to alternative frequen-
cies that are broadcasting different
programme content.
The radio functions described in these
operating instructions refer to the EU-
ROPE tuner setting.
➮ Press and hold down the 1 and 5
buttons : simultaneously and
switch on the device again by
pressing button 1.
Note:
G REGIONAL must be activated/de-
“TUNER” is displayed.
activated separately in the menu.
➮ Select your tuner region using the
or button 7.
Switching the RDS function on/off
To save the setting,
If you want to use the RDS functions
(AF and REGIONAL),
➮ switch the device off and on again
or wait approx. 8 seconds. The
car sound system starts with the
last setting activated (radio, CD,
CD changer or AUX).
➮ press and hold down the TRAF
RDS button 6 for longer than two
seconds.
The RDS function is active when an
RDS symbol lights up in the display.
31
RADIO MODE
Switching REGIONAL on/off
Tuning into stations manually
➮ Press the MENU button 8.
You can also tune into stations manu-
ally.
➮ Press the or button 7 re-
peatedly until “REG” appears in
the display. “OFF” or “ON” is dis-
played alongside “REG”.
Note:
G
You can only tune into stations
manually if the RDS function is
deactivated.
➮ To switch REGIONAL on/off, press
the or button 7.
➮ Press the or button 7.
➮ Press the MENU button 8.
Browsing through broadcasting
networks (only FM)
Selecting the waveband /
memory bank
If radio stations provide several pro-
grammes, you have the option of
browsing through their “broadcasting
networks”.
This device can receive programmes
broadcast over the FM frequency
range as well as the MW and LW (AM)
wavebands (MW and LW only on the
Malaga CD36). There are three mem-
ory banks available for the FM wave-
band (FM1, FM2 and FMT) and one
for each of the MW and LW wave-
bands. Six stations can be stored in
each memory bank.
Note:
G
The RDS function must be activat-
ed before you can use this fea-
ture.
➮ Press the or button 7 to
switch to the next station on the
broadcasting network.
To switch between the FM memory
banks (FM1, FM2 and FMT) and the
MW and LW wavebands,
Note:
G
When using this feature, you will
only be able to switch to stations
that you have received once be-
fore already. To receive the sta-
tions, use the scan function or the
Travelstore function.
➮ briefly press the BND•TS button
;.
Tuning into a station
There are various ways of tuning into
a station.
Setting the sensitivity of station
seek tuning
Automatic station seek tuning
You can choose whether the radio
should only tune into stations provid-
ing good reception or whether it can
also tune into those with a weak re-
ception.
➮ Press the or button 7.
The radio tunes into the next receiva-
ble station.
➮ Press the MENU button 8.
32
RADIO MODE
➮ Press the or button 7 re-
Note:
peatedly until “SENS” and the cur- G Any stations previously stored in
rently set value appear in the dis-
play.
this memory bank are deleted in
the process.
“SENS HI6” means that the tuner is set
to the highest sensitivity setting. “SENS
LO1” means it is set to the lowest sen-
sitivity setting.
➮ Press and hold down the BND•TS
button ; for longer than two sec-
onds.
The storing procedure begins. “FM
TSTORE” appears in the display.After
the process has completed, the radio
will play the station that is stored in
memory location 1 of the FMT memo-
ry bank.
➮ Set the desired sensitivity using
the
buttons 7.
When you have finished adjusting the
setting,
➮ press the MENU button 8.
Listening to stored stations
Note:
G
You can set different sensitivity
levels for FM and MW or LW (AM)
(MW/LW only on the Malaga
CD36).
➮ Select the memory bank or wave-
band.
➮ Press the station button 1 - 6 :
that corresponds to the station
that you want to listen to.
Storing stations
Scanning receivable stations
(SCAN)
You can use the scan function to listen
to all the receivable stations briefly. You
can set the scanning time in the menu
to between 5 and 30 seconds (in steps
of 5 seconds).
Storing stations manually
➮ Select the memory bank that you
want (FM1, FM2, FMT) or one of
the wavebands (MW or LW) (MW/
LW only on the Malaga CD36).
➮ Tune into the station that you
want.
➮ Press and hold down one of the
station buttons 1 - 6 : for longer
than two seconds to assign the
station to that button.
Starting SCAN
➮ Press and hold down the MENU
button 8 for longer than two sec-
onds.
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions providing the best reception in the
region (only FM). The stations are
stored in the FMT memory bank.
Scanning begins. “SCAN” appears
briefly in the display followed by a flash-
ing display of the current station name
or frequency.
33
RADIO MODE
Cancelling SCAN and continuing
listening to a station
PTY-EON
If you specify the programme type and
start seek tuning, the radio will switch
from the current station to a station of
the selected programme type.
➮ Press the MENU button 8.
Scanning stops and the radio contin-
ues playing the station that it tuned into
last.
Note:
G
If the tuner does not find a station
that matches the selected pro-
gramme type, you will hear a beep
and “NO PTY” appears briefly in
the display. The radio will then re-
tune to the station that it received
last.
Setting the scanning time
➮ Press the MENU button 8.
➮ Press the or button 7 re-
peatedly until “SCAN TIME” ap-
pears in the display.
➮ Set the desired scanning time us-
G
If the tuned radio station or anoth-
er station on the broadcasting net-
work broadcasts your selected
programme type at a later point in
time, the radio will automatically
switch from the currently tuned
station or from CD mode or CD-
changer mode to the station
ing the
buttons 7.
When you have finished adjusting the
setting,
➮ press the MENU button 8 twice.
Note:
G
The scanning time that you set is
also used when scanning in CD
mode and in CD-changer mode.
whose programme type matches
the one you selected.
G
If you do not want this PTY EON
switching, disable it in the menu
with “PTY OFF”. First, press one
of the SRC 2 or BND•TS but-
tons ;.
Programme type (PTY)
Besides transmitting the station name,
some FM stations also provide infor-
mation on the type of programme they
are broadcasting. Your car radio can
receive and display this information.
Switching PTY on/off
For example, the programme types
can be:
➮ Press the MENU button 8.
➮ Press the or button 7 re-
peatedly until “PTY ON” or “PTY
OFF” appears in the display.
CULTURE
SPORT
ROCK
TRAVEL
NEWS
JAZZ
POP
CLASSICS
➮ Press the or button 7 to
switch PTY ON or OFF.
You can use the PTY function to se-
lect stations of a particular programme
type.
➮ Press the MENU button 8.
34
RADIO MODE
FM). If interference occurs, the inter-
ference level is cut automatically.
Selecting the PTY language
You can select the language in which
the programme types are displayed.
The following are available:
“DEUTSCH”, “ENGLISH” and
“FRANÇAIS”.
Switching HICUT on/off
➮ Press the MENU button 8.
➮ Press the or button 7 re-
peatedly until “HICUT” appears in
the display.
➮ Press the MENU button 8.
➮ Press the or button 7 re-
peatedly until “PTY LANG” ap-
pears in the display.
➮ Press the or button 7 to ad-
just the HICUT setting.
“HICUT 0” means that the interference
level will not be cut automatically. “HI-
CUT 1” means that it will be cut auto-
matically.
➮ Set your preferred language using
the
buttons 7.
When you have finished adjusting the
setting,
➮ Press the MENU button 8.
➮ press the MENU button 8 twice.
Configuring the display
Selecting a programme type and
starting seek tuning
In radio mode you have the option of
displaying the waveband together with
the memory bank / memory location
and the time or the station name / fre-
quency of the current station.
➮ Press the or button 7.
The current programme type appears
in the display.
➮ If you want to select another pro-
gramme type, you can do so by
pressing the or button 7
whilst this display is visible.
Select “FREQUENCY” to display the
station name / frequency or select
“CLOCK” to display the waveband to-
gether with the memory bank / memo-
ry location and the clock time.
The selected programme type appears
briefly in the display.
➮ Press the MENU button 8.
➮ Press the or button 7 to start
➮ Press the or button 7 re-
peatedly until “TUN DISP” ap-
pears in the display.
seek tuning.
The radio will then tune into the next
station it finds that matches your se-
lected programme type.
➮ Press the or button 7 to
switch between “CLOCK” and
“FREQUENCY”.
Optimising radio reception
HICUT
➮ Press the MENU button 8 twice.
The HICUT function improves recep-
tion during poor radio reception (only
35
TRAFFIC INFORMATION
Traffic information
Your device is equipped with an RDS-
EON receiver. EON stands for En-
hanced Other Network.
G
if you retune the radio from a traf-
fic information station to a station
that does not broadcast traffic in-
formation.
If you hear the warning beep, you can
either switch off traffic information pri-
ority or tune into a station that broad-
casts traffic information.
Whenever a traffic announcement (TA)
is broadcast, the system switches au-
tomatically from a station that does not
provide traffic reports to the appropri-
ate traffic information station within the
broadcasting network that does.
Setting the volume for traffic
announcements
Once the traffic report has been played,
the system will switch back to the pro-
gramme you were listening to before.
➮ Press the MENU button 8.
➮ Press the or button 7 re-
peatedly until “TA VOLUME” ap-
pears in the display.
Switching traffic information
priority on/off
➮ Adjust the volume using the
➮ Briefly press the TRAF button
buttons 7.
6.
When you have finished adjusting the
setting,
Traffic announcement priority is active
when the traffic-jam symbol lights up
in the display.
➮ press the MENU button 8 twice.
Notes:
G
Note:
You can use the volume control
4 to adjust the volume during a
traffic announcement for the dura-
tion of that announcement.
You will hear a warning beep:
G
if you leave the reception area of
a traffic information station that
you are currently listening to.
G
You can set the volume distribu-
tion for the traffic announcements.
For further details, please read the
“Sound” chapter.
G
if you are receiving a traffic infor-
mation station and the volume is
set to minimum (0) or if, whilst lis-
tening to a CD, a CD in the chang-
er or an AUX source, you leave
the reception area of the tuned
traffic information station and the
subsequent automatic search can-
not find a new traffic information
station.
36
CD MODE
If there is already a CD inserted in the
drive,
CD mode
You can use this device to play stand-
ard audio CDs, CD-Rs and CD-RWs
with a diameter of 12 or 8 cm.
➮ press the SRC
button 2 re-
peatedly until “CD” appears in the
display.
Risk of severe damage to the
CD drive!
Playback begins from the point at
which it was last interrupted.
Contoured CDs (shape CDs) are
not suitable for playback in this unit.
We do not accept responsibility for
any damage to the CD drive that
may occur as a result of the use of
unsuitable CDs.
Selecting tracks
➮ Press one of the arrow buttons 7
to select the next or previous
track.
If you press the or button 7 once,
the current track will be played again
from the beginning.
To ensure the system functions prop-
erly, only use CDs labelled with the
compact disc logo. Problems might be
experienced when playing copy-pro-
tected CDs. Blaupunkt cannot guaran-
tee the proper functioning of copy-pro-
tected CDs!
Fast track selection
For fast track selection (backwards or
forwards),
➮ press and hold down one of the
buttons 7 until fast-reverse /
fast-forward track selection be-
gins.
/
Switching to CD mode
If there is no CD inserted in the drive,
➮ Gently push the CD with its print-
ed side uppermost into the drive
5 until you feel some resistance.
Fast searching (audible)
For fast searching (backwards or for-
wards),
The drive draws in the CD automatic-
ally.
➮ press and hold down one of the
buttons 7 until fast search-
You must not assist or hinder the drive
as it draws in the CD.
ing backwards / forwards begins.
The CD starts playing.
Random track play (MIX)
Note:
➮ Press the 5 MIX button :.
G
If the vehicle ignition was switched
off before you inserted the CD,
you will first have to switch on the
device by pressing button 1 in
order to start playing the CD.
“MIX CD” appears briefly in the display
and the MIX symbol lights up. The next
randomly selected track will then be
played.
37
CD MODE
“RPT OFF” appears briefly in the dis-
play and the RPT symbol disappears.
Normal playback is then resumed.
Cancelling MIX
➮ Press the 5 MIX button : again.
“MIX OFF” appears briefly in the dis-
play and the MIX symbol disappears.
Pausing playback (PAUSE)
➮ Press button 3 :.
Scanning tracks (SCAN)
You can scan (briefly play) all the tracks
on the CD.
“PAUSE” appears in the display.
Cancelling pause
➮ Press and hold down the MENU
button 8 for longer than two sec-
onds.
➮ Press button 3 : whilst pause
is activated.
Playback is resumed.
The next track will then be scanned.
Configuring the display
You can choose between two display
types for CD mode:
Note:
G
You can set the scanning time.
For further details, please read the
section entitled “Setting the scan-
ning time” in the “Radio mode”
chapter.
G
Track number and clock time
Track number and playing time
G
➮ Press the MENU button 8.
Cancelling SCAN and continuing
listening to a track
➮ Press the or button 7 re-
peatedly until “CD DISP” appears
in the display.
➮ To cancel scanning, press the
MENU button 8.
➮ Press the or button 7 to
switch between “PLAY TIME” and
“CLOCK”.
The currently scanned track will then
continue to be played normally.
➮ Press the MENU button 8 twice.
Repeating tracks (REPEAT)
If you want to repeat a track,
➮ press the 4 RPT button :.
Traffic announcements in CD
mode
“RPTTRCK” appears briefly in the dis- If you wish to receive traffic announce-
play and the RPT symbol lights up. The
track is repeated continuously until you
deactivate RPT.
ments whilst CD mode is activated,
➮ press the TRAF button 6.
Traffic announcement priority is active
when the traffic-jam symbol lights up
in the display. For further details, please
read the “Traffic information reception”
chapter.
Cancelling REPEAT
If you want to cancel the repeat func-
tion,
➮ press the 4 RPT button : again.
38
CD MODE
CD-CHANGER MODE
CD-changer mode
Ejecting a CD
➮ Press the eject button 3 next to
Note:
the CD compartment.
G Information on handling CDs, in-
serting CDs and operating the CD
changer can be found in the oper-
ating instructions supplied with
your CD changer.
The CD is ejected.
➮ Remove the CD.
Note:
G
If a CD is ejected, the drive will
automatically draw it back in again
after approx. 10 seconds.
Switching to CD-changer mode
➮ Press the SRC
button 2 re-
peatedly until “CHANGER” ap-
pears in the display.
G
You can also eject CDs whilst the
device is switched off or whilst an-
other audio source is activated.
The device starts playing the first CD
that the CD changer detects.
Selecting CDs
To move up or down to another CD,
➮ press the or button 7 once
or several times.
Note:
G The device will ignore empty CD
slots in the changer and slots con-
taining invalid CDs.
Selecting tracks
To move up or down to another track
on the current CD,
➮ press the or button 7 once
or several times.
Fast searching (audible)
For fast searching (backwards or for-
wards),
➮ press and hold down one of the
buttons 7 until fast search-
ing backwards / forwards begins.
39
CD-CHANGER MODE
Cancelling REPEAT
Configuring the display
To stop the current track or current CD
from being repeated,
There are five display options availa-
ble for CD-changer mode:
G
G
G
G
G
Track number and playing time
(“TRCK-TIME”)
➮ briefly press the 4 RPT button :.
“RPT OFF” appears and RPT disap-
pears from the display.
Track number and clock time
(“TRCK-CLK”)
Random track play (MIX)
To play the tracks on the current CD in
random order,
CD number and track number
(“CD-TRCK”)
CD number and clock time
(“CD-CLK”)
➮ briefly press the 5 MIX button :.
“MIX CD” appears briefly and MIX
lights up in the display.
CD number and playing time
(“CD-TIME”)
To play the tracks on all the inserted
CDs in random order,
➮ Press the MENU button 8.
➮ Press the or button 7 re-
peatedly until “CDC DISP” ap-
pears in the display.
➮ press and hold down the 5 MIX
button : for longer than two sec-
onds.
➮ Press the or button 7 re-
peatedly until the option that you
want is displayed.
“MIX ALL” appears briefly and MIX
lights up in the display.
Cancelling MIX
➮ Press the MENU button 8 twice.
➮ Briefly press the 5 MIX button :.
Repeating individual tracks or
whole CDs (REPEAT)
To repeat the current track,
“MIX OFF” appears and MIX disap-
pears from the display.
Scanning all the tracks on all
the CDs (SCAN)
To scan (briefly play) all the tracks on
all the inserted CDs in ascending or-
der,
➮ briefly press the 4 RPT button :.
“RPT TRCK” appears briefly and RPT
lights up in the display.
To repeat the current CD,
➮ press and hold down the 4 RPT
button : for longer than two sec-
onds.
➮ press and hold down the MENU
button 8 for longer than two sec-
onds.
“RPT DISC” appears briefly and RPT
lights up in the display.
“TRK SCAN” appears in the display
and the number of the current track
flashes.
40
CD-CHANGER MODE
CLOCK TIME
Cancelling SCAN
CLOCK time
To stop scanning,
Displaying the clock time
To display the clock time briefly,
➮ briefly press the MENU button 8.
The currently scanned track will then
continue to be played normally.
➮ Press and hold down the SRC
button 2 until the clock time ap-
pears in the display.
Note:
G
You can set the scanning time.
For further details, please read the
section entitled “Setting the scan-
ning time” in the “Radio mode”
chapter.
Setting the clock time
To set the clock time,
➮ press the MENU button 8.
➮ Press the or button 7 re-
peatedly until “CLOCK SET” ap-
pears in the display.
Pausing playback (PAUSE)
➮ Press button 3 :.
“PAUSE” appears in the display.
➮ Press the button 7.
The clock time appears in the display.
The hours flash and can be adjusted.
Cancelling pause
➮ Press button 3 : whilst pause
➮ Adjust the hours using the
/
is activated.
buttons 7.
Playback is resumed.
Once the hours are set,
➮ press the button 7.
The minutes flash.
➮ Adjust the minutes using the
/
buttons 7.
➮ Press the MENU button 8 twice.
Selecting 12/24-hour clock
mode
➮ Press the MENU button 8.
“MENU” appears in the display.
➮ Press the or button 7 re-
peatedly until “24 H MODE” or “12
H MODE” appears in the display.
➮ Press the or button 7 to
switch between the modes.
41
CLOCK TIME
SOUND
When you have finished adjusting the
setting,
Sound
You can adjust the sound settings
(bass and treble) separately for each
source (radio, CD and CD changer /
AUX).
➮ press the MENU button 8.
Displaying the time
continuously when the device is
off and the ignition is on
To display the time when the device is
off and the vehicle ignition is on,
The volume distribution settings (bal-
ance and fader) apply to all the audio
sources (except for traffic announce-
ments).
➮ press the MENU button 8.
You can only adjust the balance and
fader settings for traffic announce-
ments whilst a traffic announcement
is actually being played.
“MENU” appears in the display.
➮ Press the or button 7 re-
peatedly until “CLOCK OFF” or
“CLOCK ON” appears in the dis-
play.
Adjusting the bass
➮ Press the AUDIO button 9.
“BASS” appears in the display.
➮ Press the or button 7 to
switch between the ON/OFF set-
tings.
➮ Press the or button 7 to ad-
just the bass.
When you have finished adjusting the
setting,
When you have finished adjusting the
setting,
➮ press the MENU button 8.
➮ press the AUDIO button 9.
Briefly displaying the time
when the device is switched off
To display the time briefly when the de-
vice is off,
Adjusting the treble
➮ Press the AUDIO button 9.
“BASS” appears in the display.
➮ Press the button 7 repeatedly
until “TREBLE” appears in the dis-
play.
➮ press the SRC
button 2.
The time is displayed for eight seconds.
➮ Press the or button 7 to ad-
just the treble.
When you have finished adjusting the
setting,
➮ press the AUDIO button 9.
42
SOUND
Setting the left/right volume
distribution (balance)
To adjust the left/right volume distribu-
tion (balance),
Equalizer presets
This device is equipped with an equal-
izer that has been preset with settings
for the “ROCK”, “POP” and “CLASSIC”
music styles.
➮ press the AUDIO button 9.
To select an equalizer preset,
➮ press the AUDIO button 9.
“BASS” appears in the display.
“BASS” appears in the display.
➮ Press the button 7 repeatedly
until “BAL” appears in the display.
➮ Press the button 7 repeatedly
until “POP”, “ROCK”, “CLASSIC”
or “EQ OFF” appears in the dis-
play.
➮ Press the or button 7 to ad-
just the balance (right/left).
When you have finished adjusting the
setting,
➮ Press the or button 7 to se-
lect one of the presets or select
“EQ OFF” to switch off the equal-
izer. If you select one of the pre-
sets, it is shown continuously in
the display.
➮ press the AUDIO button 9.
Adjusting the front/rear volume
distribution (fader)
To adjust the front/rear volume distri-
bution (fader),
When you have finished adjusting the
setting,
➮ press the AUDIO button 9.
“BASS” appears in the display.
➮ press the AUDIO button 9.
➮ Press the button 7 repeatedly
until “FADER” appears in the dis-
play.
➮ Press the or button 7 to ad-
just the fader (front/rear).
When you have finished adjusting the
setting,
➮ press the AUDIO button 9.
43
X-BASS
X-BASS
LEVEL DISPLAY
Configuring the level
display
You can use the X-Bass feature to
boost the bass at low volume levels.
The level display temporarily provides
you with a symbolic representation of
the volume and audio settings whilst
you are adjusting them.
The selected X-Bass setting affects all
the audio sources (radio, CD, CD
changer or AUX).
When you are not changing any set-
tings, the level display depicts the peak
music/speech output. You can switch
the level display on/off.
You can set the X-BASS boost in steps
ranging from 1 to 3.
“XBASS OFF” means that the X-BASS
function is switched off.
➮ Press the MENU button 8.
Adjusting the X-BASS boost
➮ Press the AUDIO button 9.
“BASS” appears in the display.
“MENU” appears in the display.
➮ Press the or button 7 re-
peatedly until “PEAK LVL” ap-
pears in the display.
➮ Press the button 7 repeatedly
until “XBASS” appears in the dis-
play together with the current set-
ting.
➮ Press the or button 7 to
switch between “PEAK ON” and
“PEAK OFF”.
➮ Press the or button 7 re-
peatedly until the setting that you
want appears in the display.
When you have finished adjusting the
setting,
➮ press the MENU button 8 twice.
When you have finished adjusting the
setting,
➮ press the AUDIO button 9.
44
EXTERNAL AUDIO SOURCES
SPECIFICATIONS
Specifications
External audio sources
Instead of connecting a CD changer,
you can connect another audio source
equipped with a line output. Audio
sources can, for example, be portable
CD players, MiniDisc players or MP3
players.
Amplifier
Output power:
4 x 25 watts sine
in accordance with
DIN 45 324
at 14.4 V
4 x 45 watts max.
If you want to connect an external au-
dio source, you will need an adapter
cable. You can obtain this cable (Blau-
punkt no.: 7 607 897 093) from your
authorised Blaupunkt dealer.
power
Tuner
Wavebands in Europe:
FM : 87.5 - 108 MHz
MW:
Note:
If no CD changer is connected,
531 - 1 602 kHz
153 - 279 kHz
G
LW :
the AUX input must be activated in
the menu.
FM frequency response:
35 - 16,000 Hz
Switching the AUX input on/off
➮ Press the MENU button 8.
“MENU” appears in the display.
CD
Frequency response:
➮ Press the or button 7 re-
peatedly until “AUX OFF” or “AUX
ON” appears in the display.
20 - 20,000 Hz
Pre-amp out
➮ Press the or button 7 to
4 channels:
2 V
switch AUX on/off.
When you have finished adjusting the
setting,
Input sensitivity
AUX input:
2 V / 6 kΩ
➮ press the MENU button 8.
Note:
Weight:
1.33 kg
G
If the AUX input is activated, you
can select it by pressing the SRC
button 2. “AUX INPUT” then ap-
pears in the display.
Subject to changes!
45
Bitte den ausgefüllten Gerätepass sicher aufbewahren!
Please keep the filled-in radio pass in a safe place!
Prière de conserver soigneusement la carte d’autoradio remplie !
Tenete per favore il libretto di apparecchio, debitamente riempito,
in un posto sicuro!
Bewaar de ingevulde apparaatpas op een veilige plaats!
Vänligen förvara ifyllt apparatpass på säker plats!
¡Favor guardar el documento del aparato debidamente llenado en
un lugar seguro!
Por favor, guardar o cartão preenchido do aparelho num lugar
seguro!
Det udfyldte apparatpas opbevares et sikkert sted!
207
Country:
Phone:
Fax:
WWW:
Germany
Austria
Belgium
Denmark
Finland
France
(D)
(A)
(B)
0180-5000225
01-610 39 0
02-525 5444
05121-49 4002
01-610 39 391
02-525 5263
44-898 644
09-435 99236
01-4010 7320
01-89583 8394
210 94 12 711
01-46 66 706
02-369 62464
40 2085
(DK) 44 898 360
(FIN) 09-435 991
(F)
01-4010 7007
Great Britain (GB) 01-89583 8880
Greece
Ireland
Italy
(GR) 210 94 27 337
(IRL) 01-46 66 700
(I)
02-369 62331
40 4078
Luxembourg (L)
Netherlands (NL) 0800 400 1010
0800 400 1040
66-817 157
2185 00165
Norway
Portugal
Spain
(N)
(P)
(E)
(S)
66-817 000
2185 00144
902 52 77 70
08-7501850
91 410 4078
08-7501810
01-8471650
02-6130 0514
76 511 809
022-8771260
0212-346 00 40
708-6817188
Sweden
Switzerland (CH) 01-8471644
Czech. Rep. (CZ) 02-6130 0446
Hungary
Poland
Turkey
USA
Brasil
(H)
76 511 803
(PL) 0800-118922
(TR) 0212-335 06 71
(USA) 800-950-2528
(Mercosur)
Malaysia
(Asia Pacific) (MAL) +604-6382 474
(BR) 0800 7045446
+55-19 3745 2773
+604-6413 640
Gerätepass
Name:
Typ:
..................................................................
7 646 .........................................................
Serien-Nr.: BP .............................................................
Blaupunkt GmbH, Robert-Bosch-Straße 200, D-31139 Hildesheim
02/06 - CM-AS/SCS
(dt, gb, fr, it, nl, sw, es, pt, dk)
8622404871
|