VX229 Series
LCD Monitor
User Guide
Table of contents
Notices......................................................................................................... iv
Safety information ....................................................................................... v
Care & Cleaning.......................................................................................... vi
Takeback Services..................................................................................... vii
1.1
1.2
1.3
Welcome! ...................................................................................... 1-1
Package contents......................................................................... 1-1
Monitor introduction.................................................................... 1-2
1.3.1
1.3.2
1.3.3
1.3.4
Front view ....................................................................... 1-2
Back view........................................................................ 1-4
QuickFit Function............................................................ 1-5
GamePlus Function ........................................................ 1-6
2.1
Assembling the monitor base..................................................... 2-1
2.1.1
2.1.2
Assembling the base....................................................... 2-1
Detaching the base......................................................... 2-2
2.2
2.3
2.4
3.1
Adjusting the monitor.................................................................. 2-3
Connecting the cables................................................................. 2-3
Turning on the monitor................................................................ 2-5
OSD (On-Screen Display) menu ................................................. 3-1
3.1.1
How to reconfigure.......................................................... 3-1
3.1.2
OSD Function Introduction.............................................. 3-1
3.2
3.3
3.4
Specifications Summary ............................................................. 3-5
Troubleshooting (FAQ)................................................................ 3-7
Supported operating modes ....................................................... 3-8
iii
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
This product implements power management functionality. In case of no
signal input after 10 seconds, the product automatically goes to sleep/
standby mode.
As an Energy Star® Partner, our company has determined
that this product meets the Energy Star® guidelines for
energy efficiency.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
iv
Safety information
•
•
•
•
•
Before setting up the monitor, carefully read all the documentation that
came with the package.
To prevent fire or shock hazard, never expose the monitor to rain or
moisture.
Never try to open the monitor cabinet. The dangerous high voltages
inside the monitor may result in serious physical injury.
If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
•
•
Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or
over a radiator or heat source unless proper ventilation is provided.
The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
•
•
•
Use the appropriate power plug which complies with your local power
standard.
Do not overload power strips and extention cords. Overloading can
result in fire or electric shock.
Avoid dust, humidity, and temperature extremes. Do not place the
monitor in any area where it may become wet. Place the monitor on a
stable surface.
•
Unplug the unit during a lightning storm or if it will not be used for a
long period of time. This will protect the monitor from damage due to
power surges.
•
•
Never push objects or spill liquid of any kind into the slots on the
monitor cabinet.
To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100-240V AC.
•
•
If you encounter technical problems with the monitor, contact a
qualified service technician or your retailer.
This product contains chemicals, including lead, known to the State of
California to cause birth defects or other reproductive harm.
Wash hands after handling.
v
Care & Cleaning
•
Before you lift or reposition your monitor, it is better to disconnect the
cables and power cord. Follow the correct lifting techniques when
positioning the monitor. When lifting or carrying the monitor, grasp the
edges of the monitor. Do not lift the display by the stand or the cord.
•
•
Cleaning. Turn your monitor off and unplug the power cord. Clean the
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.
Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the LCD. Never spray cleaner directly on the
screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
•
The screen may flicker during the initial use due to the nature of the
fluorescent light. Turn off the Power Switch and turn it on again to
make sure that the flicker disappears.
•
•
You may find slightly uneven brightness on the screen depending on
the desktop pattern you use.
When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the Power Switch for hours.
•
When the screen becomes black or flashes, or cannot work anymore,
contact your dealer or service center to fix it. Do not repair the screen
by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying
to complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a task.
vi
Where to find more information
Refer to the following sources for additional information and for product
and software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Your product package may include optional documentation that may
have been added by your dealer. These documents are not part of
the standard package.
Takeback Services
ASUS recycling and takeback programs come from our commitment to the
highest standards for protecting our environment. We believe in providing
solutions for our customers to be able to responsibly recycle our products,
batteries and other components as well as the packaging materials.
information in different region.
vii
1.1
Welcome!
Thank you for purchasing the ASUS® LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper,
broader, and brighter display, plus a host of features that enhance your
viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings to you!
1.2
Package contents
Check your package for the following items:
LCD monitor
1 x Adapter
1 x Power cable
1 x VGA cable
1 x DVI cable (*depends on regions)
1 x DVI-HDMI cable (*depends on regions)
1 x Audio cable (*only available for VX229H)
1 x Quick start guide
1 x Warranty card
If any of the above items is damaged or missing, contact your retailer
immediately.
CAUTION
ASUS LCD Monitor VX229H, VX229N
1-1
1.3
Monitor introduction
1.3.1
Front view
VX229H
4
6
7
VX229N
4
2
7
1.
Button:
•
2.
/
/
Button:
•
Press this hotkey to switch from six video preset modes
(Scenery Mode, Standard Mode, Theater Mode, Game Mode,
Night View Mode, and sRGB Mode) with SPLENDID™ Video
Intelligence Technology.
•
•
Exit the OSD menu or go back to the previous menu as the OSD
menu is active.
Automatically adjusts the image to its optimized position, clock,
and phase by pressing this button for 2~4 seconds.
3.
•
/
Button:
Decreases values or moves your selection left/down.
Volume hotkey (only available in VX229H models)
Contrast hotkey (only available in VX229N models)
•
•
Chapter 1: Product Introduction
1-2
4. MENU Button:
•
•
•
Turns on the OSD menu.
Enacts the selected OSD menu item.
Press this button for 5 seconds to activate the Key Lock function.
Press it again for 5 seconds to disactivate the function.
5.
6.
Button:
•
•
Increases values or moves your selection right/up.
Brightness hotkey
Input Select Button:
•
Selects an available input source (only available in VX229H
models).
Press
(Input Select button) to display VGA/HDMI/DVI signals after you
connect a VGA, HDMI, or DVI cable with the monitor.
7.
Power Button/Power Indicator:
•
•
Press this button to turn the monitor on/off.
The color definition of the power indicator is as the table below.
Status
White
Orange
OFF
Description
ON
Standby / Power saving
OFF
ASUS LCD Monitor VX229H, VX229N
1-3
1.3.2
Back view
VX229H
HDMI
HDMI
VGA
1
2
HDMI
HDMI
VGA
1
2
4
6
VX229N
DVI
VGA
DVI
VGA
7
2
5
6
1. HDMI port: This port is for connection with an HDMI compatible
device.
2. VGA port: This 15-pin port is for PC VGA connection.
3. Audio-in port: This port connects PC audio source by the bundled
audio cable.
4. Earphone jack: This port connects to an earphone.
5. DC-in port: This port connects the adapter.
6. Kensington Lock: This port connects a lock-and-cable apparatus for
security purposes.
7. DVI port: This 24-pin port is for PC (Personal Computer) DVI-D
digital signal connection.
Chapter 1: Product Introduction
1-4
1.3.3
QuickFit Function
The QuickFit function allows users to have a preview of the document or
photo layout directly on screen without printing test copies.
QuickFit has two patterns:
a. Grid pattern: Facilitates designers and users to organize content
and layout on one page and achieve a consistent look and feel.
Alignment Grid
EXIT
QuickFit
b. Photo size: Provides photographers and other users to
accurately view and edit their photos in real size on the screen.
4x6
3x5
2x2
8x10
5x7
EXIT
QuickFit
EXIT
QuickFit
To activate QuickFit, press the QuickFit hotkey repeatedly to switch
between different pattern sizes.
When QuickFit is activated, press the control buttons to make adjustments.
The QuickFit OSD displayed in the lower right corner of the screen will
guide users to make selections.
EXIT
QuickFit
ASUS LCD Monitor VX229H, VX229N
1-5
1.3.4
GamePlus Function
The GamePlus Function provides a toolkit and creates a better gaming
environment for users when playing different types of games. In addition,
Aimpoint function is specially designed for new gamers or beginners who
are interested in First Person Shooter (FPS) games.
To activate GamePlus:
1. Press the MENU button to activate the OSD menu.
2. Press
and
to select System Setup and press the MENU
button to enter the System Setup sub-menu.
VX229
3. Press
and
to select
Splendid
Color
GamePlus
ON
GamePlus and press the MENU
button to enter its sub-menu.
Image
OFF
Input Select
System Setup
4. Press
and
to select
ON and press the MENU button
to enter its sub-menu.
Move
Menu
Exit
5. Press
to select Aimpoint or Timer and press the MENU button
to confirm the selection.
6. To exit the OSD menu, press the
button.
GamePlus Main Menu
GamePlus - Aimpoint
GamePlus
Aimpoint
Timer
(Practice Mode)
:
Exit / Off
:
Select
MENU
:
OK
:
Exit / Off
:
Select
MENU
:
OK
GamePlus - Timer
GamePlus - Timer - Position
Position
:
Exit / Off
:
Select
MENU
:
OK
:
Exit / Off
:
Select
MENU
:
OK
To exit the GamePlus function, do one of the following:
- Press the button.
- Press the MENU button and select System Setup >
GamePlus > OFF.
Chapter 1: Product Introduction
1-6
2.1
Assembling the monitor base
2.1.1
Assembling the base
1. Have the front of the monitor face down on a table.
2. Attach the base to the arm and fix with the screw to join them tightly.
You can easily tighten the screw by fingers.
3. Adjust the monitor to the angle that is most comfortable for you.
We recommend that you cover the table surface with soft cloth to
prevent damage to the monitor.
ASUS LCD Monitor VX229H, VX229N
2-1
2.1.2
Detaching the base
1. Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2. Use your fingers to loosen the screw located at the bottom of the
base, and remove the base from the stand.
3. Or, you may directly use a screwdriver to remove the screw that
secures the base to the stand, and detach the base from the stand.
•
•
We recommend that you cover the table surface with soft cloth to
prevent damage to the monitor.
Hold the base while removing the screw.
Chapter 2: Setup
2-2
2.2
Adjusting the monitor
•
For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable
for you.
•
•
Hold the stand to prevent the monitor from falling while changing its
angle.
You can adjust the monitor’s angle from -5˚ to 20˚.
-5 to +20
It is normal that the monitor slightly shakes while you adjust the viewing angle.
2.3
Connecting the cables
Connect the cables according to the following instructions:
VX229H
HDMI
HDMI
VGA
1
2
HDMI
HDMI
VGA
1
2
Audio-in
DC-IN
HDMI
VGA Earphone jack
ASUS LCD Monitor VX229H, VX229N
2-3
VX229N
DVI
VGA
DVI
VGA
DC-IN
DVI
VGA
•
•
To connect the power cord:
a. Connect the adapter to the monitor's DC input.
b. Connect one end of the power cable to the adapter, and the other
end to a power outlet.
To connect the VGA, HDMI, or DVI cable:
a. Plug one end of the VGA, HDMI, or DVI cable to the monitor's
VGA, HDMI, or DVI port.
b. Connect the other end of the VGA, HDMI, or DVI cable to your
computer's VGA, HDMI, or DVI port.
c. Tighten the two screws to secure the VGA or DVI connector.
•
•
To connect the audio cable: connect one end of the audio cable to
the monitor’s Audio-in port, the other end to the computer’s audio-out
port.
To use the earphone:
a. When an HDMI cable is connected, connect the end with plug
type to the monitor’s earphone jack.
b. When VGA and Audio-in-line is connected, connect the end with
plug type to the monitor's earphone jack.
When multiple video cable signals are connected, you can choose the desired
input by pressing the
in the OSD menu.
Input Select key or select from the Input Select item
Chapter 2: Setup
2-4
2.4
Turning on the monitor
power button. The power indicator
monitor is ON.
lights up in white to show that the
ASUS LCD Monitor VX229H, VX229N
2-5
3.1
OSD (On-Screen Display) menu
3.1.1
How to reconfigure
VX229
1. Press the MENU button
to activate the OSD menu.
Splendid
Color
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Image
2. Press
and
to navigate
Input Select
System Setup
Night View Mode
sRGB Mode
through the functions. Highlight
and activate the desired function
by pressing the MENU button. If
the function selected has a
Move
Menu
Exit
sub-menu, press
and
again to navigate through the
sub-menu functions. Highlight and activate the desired sub-menu
function by pressing the MENU button.
3. Press
and
to change the settings of the selected function.
4. To exit the OSD menu, press the
to adjust any other function.
button. Repeat step 2 and step 3
3.1.2
OSD Function Introduction
1. Splendid
VX229
Splendid
Color
Scenery Mode
Standard Mode
Theater Mode
Game Mode
This function contains six sub-
functions that you can select for
your preference. Each mode has
the Reset selection, allowing you
to maintain your setting or return
to the preset mode.
Image
Input Select
System Setup
Night View Mode
sRGB Mode
Move
Menu
Exit
•
•
•
•
•
•
Scenery Mode: best choice for scenery photo display with
SPLENDID™ Video Enhancement.
Standard Mode: best choice for document editing with
SPLENDID™ Video Enhancement.
Theater Mode: best choice for movies with SPLENDID™ Video
Enhancement.
Game Mode: best choice for games playing with SPLENDID™
Video Enhancement.
Night View Mode: best choice for dark-scene games or movies
with SPLENDID™ Video Enhancement.
sRGB Mode: best choice for viewing photos and graphics from
PCs.
Chapter 3: General Instruction
3-1
In the Standard Mode, the Saturation, Skin Tone, Sharpness, and
ASCR functions are not user-configurable.
In the sRGB Mode, the Brightness, Contrast, Saturation, Color
Temp., Skin Tone, Sharpness, and ASCR functions are not user-
configurable.
2. Color
VX229
You can adjust Brightness, Contrast,
Saturation, Color Temp., and Skin
Tone from this menu.
Splendid
Color
Brightness
Contrast
100
80
Image
Saturation
Color Temp.
Skin Tone
50
Input Select
System Setup
User Mode
Natural
•
Brightness: the adjusting
range is from 0 to 100.
button is a hotkey to activate
this function.
Move
Menu
Exit
•
•
•
Contrast: the adjusting range is from 0 to 100.
Saturation: the adjusting range is from 0 to 100.
Color Temp.: contains four modes including Cool, Normal,
Warm and User Mode.
•
Skin Tone: contains three color modes including Reddish,
Natural, and Yellowish.
In the User Mode, colors of R (Red), G (Green), and B (Blue) are
user-configurable; the adjusting range is from 0 ~ 100.
3. Image
You can adjust Sharpness, Aspect
VX229
Splendid
Color
Sharpness
Aspect Control
VividPixel
ASCR
60
Full
25
Control, Vividpixel, ASCR, Position
(VGA only), and Focus (VGA only)
from this menu.
Image
Input Select
System Setup
OFF
Position
Focus
•
Sharpness: the adjusting
range is from 0 to 100.
Move
Menu
Exit
Aspect Control: adjust the aspect ratio to full, 4:3, 1:1 or OverScan
•
4:3 is only available when input source is in 4:3 format
OverScan is only available for the HDMI input source
•
•
Vividpixel: ASUS Exclusive Technology that brings lifelike
visuals for crystal-clear and detail-oriented enjoyment. The
adjusting range is from 0 to 100.
ASCR: turns on/off the ASCR (ASUS Smart Contrast Ratio)
function (only available in Scenery Mode, Theater Mode, Game
Mode, and Night View Mode).
ASUS LCD Monitor VX229H, VX229N
3-2
•
•
Position: adjusts the horizontal postition (H-Position) and the
vertical position (V-Position) of the image. The adjusting range is
from 0 to 100 (only available for VGA input).
Focus: reduces the Horizonal-line noise and Vertical-line noise
of the image by adjusting (Phase) and (Clock) separately. The
adjusting range is from 0 to 100.
•
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal distrubances.
•
Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image i not proportional.
Input Select
VX229
VX229
Splendid
Color
VGA
Splendid
Color
VGA
DVI
HDMI-1
HDMI-2
Image
Image
Input Select
System Setup
Input Select
System Setup
Move
Menu
Exit
Move
Menu
Exit
VX229H
VX229N
In this menu, you can select your desired input source:
-
-
VX229H: VGA, HDMI-1 or HDMI-2.
VX229N: VGA or DVI.
4. System Setup
VX229
VX229
Splendid
Color
Splendid Demo Mode
OFF
50
Splendid
Color
Splendid Demo Mode
GamePlus
OFF
OFF
Volume
Image
Image
GamePlus
ECO Mode
OSD Setup
Language
ECO Mode
Input Select
System Setup
Input Select
System Setup
OFF
OSD Setup
Language
English
English
Key Lock
1/2
1/2
Move
Menu
Exit
Move
Menu
Exit
VX229H
Allows you to adjust the system.
VX229N
•
Splendid Demo Mode: splits the screen into two for Splendid
mode comparison (only available in Scenery Mode, Theater
Mode, Game Mode, and Night View Mode).
•
•
Volume (only available in VX229H models): Adjust the earphone
output volume level. The adjusting range is from 0 to 100.
GamePlus: Activate the GamePlus function.
Chapter 3: General Instruction
3-3
•
•
•
ECO Mode: Activate the ecology mode for power saving. (Some
gray levels may not be distinguished if ECO is ON. Its brightness
is lower than that when setting the Contrast Ratio to 100.)
OSD Setup: Adjust the horizontal postition (H-Position), vertical
position (V-Position), OSD Timeout, DDD/CI, and Transparency
of the OSD screen.
Language: Select OSD language. The selections are English,
French, German, Spanish, Italian, Dutch, Russian, Traditional
Chinese, Simplified Chinese, and Japanese.
•
•
Key Lock: Enable/Disable the Key Lock function.
Information: Display the monitor information of Input Port,
Resolution, H-freq., V-freq, and Model Name.
•
All Reset: Set to “Yes” to revert all settings to the factory default
status.
ASUS LCD Monitor VX229H, VX229N
3-4
3.2
Specifications Summary
Model Name
VX229H
TFT LCD
VX229N
Panel Type
Panel Size
21.5” (16:9, 68.6 cm) wide screen
Max. Resolution
Brightness (Typ.)
Contrast Ratio (Typ.)
1920 x 1080
250 cd/m2 (Center 1 point, type)
1000:1 (Typical)
ASUS Smart Contrast Ration
(ASCR)
≥ 80,000,000:1 (with ASCR on)
Color Saturation (NTSC)
Viewing Angle (H/V) CR>10
Display Colors
72 % (Typ)
178° (H) / 178° (V)
16.7 M colors (6 bits + Advanced-FRC)
5ms GTGσ
Response Time
Pixel Pitch
0.24795(H)mm x 0.24795(V)mm
1080P
Full HD
SPLENDIDTM Video Enhancement Yes
SPLENDIDTM selection
6 video preset modes (by hotkey)
Auto adjustment
Yes (by hotkey)
4 color temperatures
3 skin tones
HDMI (X2)
D-Sub
Color temperature selection
Skin-Tone selection
Digital input
DVI
Analog input
Audio-in port
3.5 mm Mini-jack
Yes
NA
NA
Earphone jack
Kensington Lock Slot
Auto Adjustment Hotkey
Brightness Adjustment Hotkey
Volume Adjustment Hotkey
Input Selection Hotkey
Colors
Yes
Yes
Yes
Yes
Yes
Black
Speaker (Built-in)
Power LED
1 W (x2)
NA
White (On) / Orange (Standby)
-5° ~ +20°
Tilt
Chapter 3: General Instruction
3-5
Model Name
VX229H
VX229N
40W adaptor DC 19V 2.1A, 100~240V at 50/60Hz
AC adaptor: Enertronix, EXA1204YH
AD adaptor: Delta, ADP-40KD BB
Voltage Rating
Power On: 26W (max),
Standby: < 0.5W at
AC110V~ AC220V
Power Off: < 0.5W at
AC110V~ AC220
Power On: 24W (max),
Standby: < 0.5W at
AC110V~ AC220V
Power Off: < 0.5W at
AC110V~ AC220V
Power Consumption
Temperature (Operating)
0 ~ 40° C
Temperature (Non-operating)
-30 ~ 65° C
371.3 x 499.8 x 210.1 mm (monitor)
480 x 562 x 123 mm (package)
Dimensions (W x H x D)
Weight (Esti.)
3.05 ± 1.0 kg (Net), 4.9 ± 1.0 kg (Gross)
21 languages (English, French, German, Spanish,
Italian, Dutch, Russian, Poland, Czech, Croatia,
Hungary, Romania, Portuguese, Turkey, Traditional
Chinese, Simplified Chinese, Japanese, Korean
Persian, Thai, Indonesian)
Multi-languages
Accessories
Adapter, Power cable, VGA cable, DVI cable
(*depends on regions), DVI-HDMI cable (*depends on
regions), Audio cable (*only available for VX229H),
Quick Start Guide, Warranty card
UL/cUL, CB, CE, FCC, CCC, BSMI, c- Tick, VCCI,
HDMI, Win 7 & 8 WHQL, EuP, Energy Star® 6.0,
China Energy Label, RoHS, WEEE, CU
Regulation approvals
*Adaptor has PSE Regulation approvals.
*Specifications subject to change without notice.
ASUS LCD Monitor VX229H, VX229N
3-6
3.3
Troubleshooting (FAQ)
Problem
Possible Solution
button to check if the monitor is in the
Power LED is not ON
•
•
Press the
ON mode.
Check if the adapter and power cable are properly
connected to the monitor and the power outlet.
The power LED lights amber and
there is no screen image
•
•
•
•
Check if the monitor and the computer are in the
ON mode.
Make sure the signal cable is properly connected
the monitor and the computer.
Inspect the signal cable and make sure none of the
pins are bent.
Connect the computer with another available
monitor to check if the computer is properly working.
Screen image is too light or dark
•
Adjust the Contrast and Brightness settings via
OSD.
Screen image is not centered or
sized properly
•
•
Press the
button for two seconds to
automatically adjust the image.
Adjust the H-Position or V-Position settings via
OSD.
Screen image bounces or a wave
pattern is present in the image
•
•
Make sure the signal cable is properly connected to
the monitor and the computer.
Move electrical devices that may cause electrical
interference.
Screen image has color defects
(white does not look white)
•
Inspect the signal cable and make sure that none of
the pins are bent.
•
•
Perform Reset via OSD.
Adjust the R/G/B color settings or select the Color
Temperature via OSD.
Screen image is blurry or fuzzy
No sound or sound is low
•
Press the
button for two seconds to
automatically adjust the image (for VGA mode only).
Adjust the Phase and Clock settings via OSD.
•
•
Make sure the audio cable is properly connected to
the monitor.
•
•
Adjust the volume settings of both your monitor and
computer.
Make sure the computer sound card driver is
properly installed and activated.
Chapter 3: General Instruction
3-7
3.4
Supported operating modes
Horizontal
Refresh Rate Frequency
(KHz)
Vertical
Frequency
(Hz)
Mode
Resolution
Pixel (MHz)
DOS
VGA
720x400@70Hz
640x480@60Hz
640x480@72Hz
640x480@75Hz
800x600@56Hz
800x600@60Hz
800x600@72Hz
800x600@75Hz
1024x768@60Hz
1024x768@70Hz
1024x768@75Hz
1152x864@75Hz
1280x1024@60Hz
1280x1024@75Hz
1280x960@60Hz
1280x800@60Hz
1280x720@60Hz
1280x768@60Hz
1360x768@60Hz
1366x768@60Hz
1440x900@60Hz
1600x1200@60Hz
900x449
800 x 525
832 x 520
840x500
31.469
31.469
37.861
37.500
35.156
37.879
48.077
46.875
48.363
56.476
60.023
67.5
63.981
79.976
60.000
49.702
45.00
47.776
47.712
47.712
55.935
75.000
65.290
67.500
66.587
35
70.087
59.940
72.809
75.000
56.250
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
60.000
59.810
60.000
59.870
60.015
59.790
59.887
60.000
59.954
60.000
59.934
66.66
28.322
25.175
31.500
31.500
36.000
40.000
50.000
49.500
65.000
75.000
78.750
108.00
108.000
135.00
108.00
83.500
74.25
1024 x 625
1056 x 628
1040 x 666
1056 x 625
1344x806
1328x806
1312x800
1600x900
1688x1066
1688x1066
1800x1000
1680x831
1650x750
1664x798
1792x795
1792x798
1904x934
2160x1250
2240x1089
2200x1125
2080x1111
864x525
SVGA
XGA
VESA
SXGA
WXGA
79.5
85.500
85.500
106.500
162.000
146.250
148.500
138.500
30.24
WXGA+
UXGA
WSXGA+ 1680x1050@60Hz
1920x1080@60Hz
1920x1080@60Hz
832x624@75Hz
WUXGA
MAC
SVGA
1152x667
49.714
74.533
57.27
* Modes not listed in the table may not be supported. For optimal resolution, we recommend that
you choose a mode listed in the table above.
* This monitor supports HD (480p, 576p, 720p, 1080i/p) video content from game consoles, DVD
players and other consumer video devices via HDMI.
ASUS LCD Monitor VX229H, VX229N
3-8
|