Microsoft Windows (NetBEUI) Peer-to-Peer Networks Quick Install Card
Xerox Document Centre 240/255/265 LP/ST
5.
Assign the Workgroup and Host Names
Before You Start
b) On the keypad enter 1111 or the
current password. Press the Enter
button when finished. If your printer is
an ST model press the Go to Tools
button, otherwise skip to the next step.
a) You will be returned to the previous
screen, press the Workgroup and
Host button.
If your printer is equipped with a Token Ring
interface, use the Token Ring Quick Install
Card supplied in this Quick Install Card set to
set the Ring Speed and Source Routing settings
for your environment.
b) At the next screen, press the
Workgroup Name button. Using the
Touch Screen keys, enter the name of
the workgroup in which you want the
printer to appear then press Save.
c) The Touch Screen will be used for the
.
remainder of the data entry.
Record the following information:
3.
4.
Enable Microsoft Network printing.
Network Interface Type ___________________
Workgroup Name _______________________
SMB Host Name ________________________
Printer Name ___________________________
OPTIONAL INFORMATION:
a) Press the Connectivity and Network
c) You will be returned to the previous
screen. Press the SMB Host Name
button. Using the touch panel keys,
enter the desired text for this item then
press Save.
Setup button.
b) At the next screen, press the Network
Setup button.
Enable the Protocol and Media.
d) OPTIONAL STEP: Press the SMB
Host Description button, enter the
desired text then press Save. You will
be returned to the previous screen.
a) At the next screen, press the
Microsoft Networking button.
b) At the next screen, press the
SMB Host Description ____________________
Printer Description _______________________
Transport and Media button.
e) Press Save again to return to the
c) At the next screen, press the Enable
button to enable the Microsoft Network
protocols.
previous screen.
6.
Assign a Printer Name and Description
Go to the printer and...
a) Press the Printer Description button.
d) Once enabled the Physical Media
portion of the screen will appear. Press
the corresponding button to select one
of the following NetBEUI or Ethernet,
NetBEUI/Token Ring. After making
your selection press Save.
1.
2.
Connect your Document Centre to the net-
work with the appropriate cabling.
b) Press the Printer Name button, using
the touch panel keys, enter the
desired text for this item then press
Save. Press Save again to return to
the previous screen.
Enter the Tools pathway
a) Press the Access ( ) button.
For assistance, contact your local Xerox Customer Support Center:
USA: 1-800-821-2797 Canada: 1-800-939-3769
Page 1
|