Version 1.0
November 2008
SquareFold® Trimmer Module
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Identifying the components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Main components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Paper path . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Square Fold Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Trimmer Mode Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Follow these tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Jam clearance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Fault Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Physical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
SquareFold Trimmer User Guide
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
ii
SquareFold Trimmer User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Introduction
The SquareFold Trimmer Module is an optional finishing
device that is used in conjunction with another optional
finishing device that contains a booklet maker.
The SquareFold Trimmer Module:
•
•
Receives the booklet from the booklet maker area of the
finisher,
Flattens the booklet spine, thereby reducing the
booklet’s thickness and giving it the appearance of a
perfect-bound book, and
•
Trims/cuts away the face (edge) of the booklet,
resulting in a neat finished edge.
SquareFold Trimmer Module
Tip: Always refer to the Hints and Tips section of this manual
before using the SquareFold Trimmer Module. The Hints and
Tips section provides valuable information about setting up
your jobs, which in turn ensures the best possible output for
your print/copy jobs.
Note 1: The booklet is assembled and stapled in the booklet
area of the finisher; therefore, the booklet enters the
SquareFold Trimmer Module already assembled. Any
adjustments to the image of the original and its
placement on the booklet page must be done either from
the machine’s UI or from your print driver.
Note 2: You may want to run one or more test prints/copies
before running larger jobs.
SquareFold Trimmer User Guide
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Identifying the components
Main components
The main components consist of the following:
1.
2.
Top Left Cover: Open this cover to remove paper jams. The
square fold mechanism is found in this area.
1.
2.
3.
Top Right Cover: Open this cover to remove paper jams. The
trimming mechanism is found in this area.
4.
Important!: The top covers cannot be opened during normal
operation or when the machine is idle. The covers can be
opened only when an indicator is lit (refer to page 4) and a
jam/fault occurs within the SquareFold Trimmer Module.
5.
Control Panel: The Control Panel consists of a mimic display,
buttons, and various indicator lights. The control panel is
discussed in more detail on page 4.
3.
Booklet Output Tray: This tray receives square-fold booklet
output from the finisher.
4.
5.
Trimmer Waste Container: Collects scrap/waste from the
trimmer. Pull open to remove and dispose of trimmer waste
scraps.
2
SquareFold Trimmer User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Paper path
The booklet leaves the booklet area of the finisher and enters
SquareFold Trimmer Module.
1.
2.
3.
5.
6.
2.
2.
1.
1.
The Booklet Exit sensor (in the SquareFold Trimmer Module)
detects the lead edge (spine) of booklet and moves the
booklet to square fold area.
4.
4.
3.
5.
Once the booklet spine reaches the square fold area, the
booklet is clamped and the square-folding operation begins.
6.
3.
4.
The booklet is flattened and the spine squared according to
the square-fold setting indicated on the control panel.
For detailed information on each of Square Fold settings,
refer to page 6.
After the booklet is flattened and the spine squared, it is
moved to the trimmer area.
5.
Based on the finished booklet size, the booklet is moved
until the trail edge reaches the trimmer cutter.
a.
b.
The trail edge is trimmed/cut (based on the finished
booklet size entered for the Trimmer Mode Setting).
The booklet then moves to the exit area where it is
transported to the Booklet Output Tray.
6.
Tip: Booklets exiting/leaving the SquareFold Trimmer
Module may contain trim remnants/scraps from the
previously trimmed booklet. This is due to static electricity
build-up and is normal. If booklets contain trim
remnants/scraps, simply remove and discard them.
SquareFold Trimmer User Guide
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Control panel
1.
3.
2.
2a.
3a.
1b.
2b.
1c.
3b.
3c.
1a.
2d.
2c.
1d.
3d.
The Control Panel consists of the following:
Fault indicators: These indicators light when a fault or jam
occurs in either a particular area of the SquareFold Trimmer
Module or in the finisher:
1.
This indicator lights when a jam occurs as the booklet is
leaving the exit area of the finisher.
1a.
This indicator lights when a jam occurs in the square
fold area.
1b.
1c.
This indicator lights when a jam occurs in the trimmer
area.
Tip: If one of these indicators (1a, 1b, 1c) is lit, the top
covers can be opened, and the jam/fault cleared; otherwise,
during normal operation or when the machine is idle, the top
covers cannot be opened. For information on jam/fault
clearance, refer to page 12.
This indicator lights when the Trimmer Waste Container
is pulled out or when it is full.
1d.
Trimmer functions: This area of the control panel contains
the following:
2.
Trimmer power indicator: This lights when the Trimmer
2a.
Mode is on.
Trimmer on/off button: Press this button to switch
on/off the Trimmer Mode.
2b.
4
SquareFold Trimmer User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Up/down buttons: Press the up or down button to
2c.
2d.
adjust the Trimmer Mode setting; refer to 2d.
Trimmer Mode Setting: This displays the trimmer
setting in millimeters. The trimmer setting is based on
the final output booklet size and is adjustable. This is
discussed in more detail on page 8.
Square Fold functions: This area of the control panel
contains the following:
3.
Square Fold power indicator: This lights when the
3a.
Square Fold Mode is on.
Square Fold on/off button: Press this button to switch
on or off the Square Fold Mode.
3b.
3c.
3d.
Settings button: Press this button to adjust the Square
Fold setting; refer to 3d.
Square Fold Setting: Select the desired setting; these
settings are discussed in more detail on page 6.
SquareFold Trimmer User Guide
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Square Fold Settings
Note: You may want to run one or more test prints/copies
before running larger jobs.
1.
The Square Fold Settings are found on the SquareFold
Trimmer Module control panel. The settings can be switched
on or off based on user preference. When the settings are
switched on, you can select one of five options depending on
your requirements for the finished booklet job:
2.
3.
4.
+2: Use this setting when you want the most amount of
pressure applied to the spine of the booklet. The more
pressure applied to the booklet, the more square the booklet
spine will be. +2 is the greatest amount of pressure that can
be applied to the booklet.
5.
1.
Additionally, you may want to select this setting when your
finished booklet is five pages or less and on heavier weight
paper (200 g/m² or greater).
+1: Use this setting when you want a greater amount of
pressure applied to the spine of the booklet, but not as much
pressure as the +2 setting uses.
2.
Auto: This is the machine default setting and is used for
3.
4.
most jobs.
-1: Use this setting when you want less pressure applied to
the spine of the booklet. The less pressure applied to the
booklet, the more rounded the booklet spine will be.
-2: Select this setting when your finished booklet is five pages
or less and on lighter weight paper (100 g/m² or lower). -2 is
the least amount of pressure that can be applied to the
booklet.
5.
Choose the setting that best fits your needs for the booklet
output.
6
SquareFold Trimmer User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
The following illustration shows two different booklets: one
booklet which was square-folded and one booklet that was
not square-folded.
This booklet was square-folded. The booklet spine
is flattened and squared, giving it the appearance
of a perfect-bound book.
This booklet was not square-folded. It has a
more rounded, thicker appearance to the
spine of the booklet.
7
SquareFold Trimmer User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Trimmer Mode Settings
Tip: Booklets exiting/leaving the SquareFold Trimmer
Module may contain trim remnants/scraps from the
previously trimmed booklet. This is due to static electricity
build-up and is normal. If booklets contain trim
remnants/scraps, simply remove and discard them.
The Trimmer Mode Settings are found on the SquareFold
Trimmer Module control panel. The settings can be switched
on or off based on user preference. When the settings are
switched on, you can enter a desired setting by pressing the
up/down buttons.
1.
2.
Trimmer setting up/down buttons
1.
2.
Adjustments can be made in 0.1 mm increments by pressing
the up/down buttons on the Control Panel.
Trimmer setting
The trimmer setting is based on:
•
•
The number of sheets in the finished booklet,
The finished bookletwidth size (such as 8.5 in./210 mm
or 5.5 in/149 mm),
•
•
The media type (coated/uncoated, glossy, etc.), and
The media weight
Note: Trim settings are always entered using millimeters
(mm).
Important!:You may have to experiment with various
settings in order to determine the best settings for your
particular job. Also, you may want to run one or more test
prints/copies before running larger jobs in order to ensure the
best possible booklet output.
Note: Trim settings cannot be adjusted to remove less than
2 mm (0.078 in.) or more than 20 mm (0.787 in.) of edge
material from the booklet. Adjustments less than 2 mm
(0.078 in.) may produce poor trim quality, and adjustments
greater 20 mm (0.078 in.) will result in no trimming to the
booklet edge.
8
SquareFold Trimmer User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Tip: The following table shows various scenarios using
different paper weights, media types, and trim setting
selections. Use this table as a guideline when selecting a
trim setting for your specific job. The settings shown in the
following table are provided as examples and are not
meant to represent every possible job scenario; again, use
this table as a guideline only.
Scenario
number
Paper Size
Finished booklet
size
Paper weight
(lbs./g/m²)
Approximate Trim
setting (mm)
Number of
pages in finished
booklet
8.5 x 11 in./A4 (210 x
297 mm)
5.5 x 8.5 in./149 x 210
mm
20 lbs./75g/m²
24 lbs./90 g/m²
32 lbs./120 g/m²
130
125
135
20
14
10
1
2
3
5.5 x 8.5 in./149 x 210
mm
8.5 x 11 in./A4 (210 x
297 mm)
8.5 x 11 in./A4 (210 x
297 mm)
5.5 x 8.5 in./149 x 210
mm
8.5 x 11 in./A4 (210 x
297 mm)
5.5 x 8.5 in./149 x 210
mm
20 lbs./75g/m²
80 lbs./120 g/m²
20 lbs./75g/m²
24 lbs./90 g/m²
24 lbs./90 g/m²
80 lbs./216 g/m²
20 lbs./80 g/m²
24 lbs./90 g/m²
125
135
172
170
200
205
210
210
10
12
6
4
5
8.5 x 11 in./A4 (210 x
297 mm)
5.5 x 8.5 in./149 x 210
mm
8.5 x 14 in./B4 (250 x
353 mm)
8.5 x 7 in./250 x 176.5
mm
6
8.5 x 14 in./B4 (250 x
353 mm)
8.5 x 7 in./250 x 176.5
mm
6
7
11 x 17 in./A3 (297 x
420 mm)
8.5 x 11 in./A4 (210 x
297 mm)
14
5
8
11 x 17 in./A3 (297 x
420 mm)
8.5 x 11 in./A4 (210 x
297 mm)
9
11 x 17 in./A3 (297 x
420 mm)
8.5 x 11 in./A4 (210 x
297 mm)
22
8
10
11
11 x 17 in./A3 (297 x
420 mm)
8.5 x 11 in./A4 (210 x
297 mm)
11 x 17 in./A3 (297 x
420 mm)
8.5 x 11 in./A4 (210 x
297 mm)
80 lbs./120 g/m²
80 lbs./120 g/m²
80 lbs./216 g/m²
80 lbs./210 g/m²
28 lbs./ 105 g/m²
80 lbs./120 g/m²
205
220
215
210
220
210
10
6
12
13
14
15
16
17
12 x 18 in./305 x 458 6 x 9 in./152 x 229 mm
mm
12 x 18 in./305 x 458 6 x 9 in./152 x 229 mm
mm
5
12 x 18 in./305 x 458 6 x 9 in./152 x 229 mm
mm
4
12 x 18 in./305 x 458 6 x 9 in./152 x 229 mm
mm
16
14
12 x 18 in./305 x 458 6 x 9 in./152 x 229 mm
mm
9
SquareFold Trimmer User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Hints and tips
Printing full-page images on booklets
When using full-page images, ensure that the finished
booklet size accommodates any full-page images, and that
when the booklet is trimmed, these images are not
truncated. Refer to the illustration.
1.
2.
This booklet has preprinted front and back covers with
1.
a full-page image. It was printed on 8.5 x 14 in./B4
paper. The front cover, which was trimmed, displays the
entire image.
This same booklet was printed on 8.5 x 11 in./A4 paper.
2.
The image on the front cover is truncated after
trimming it.
Before you print/copy any booklet job, you should consider
your whole job, including the following:
•
•
•
•
•
What is the desired size of the finished booklet?
Does the booklet contain full-page images?
Are you using preprinted covers with full-page images?
Are you trimming the booklet?
Do you need to shift any full-page images in order to
ensure they fit on the finished booklet?
10
SquareFold Trimmer User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Hints and tips
These are important questions which can affect the output
of your booklet jobs, especially if you are using full-page
images and trimming the booklet edges.
Follow these tips
Follow these tips to ensure you get your desired output
•
Always run one or more test prints of your job before
running a larger output quantity.
•
•
Review your test prints for truncated images/text.
If any images/text need shifting:
•
•
Use the various selections from your application’s
print driver; refer to your print driver’s Help
information, and/or
Use the various selections from the machine’s UI for
the booklet creation and image shift features; refer
to your machine’s user guide for more information
•
Remember: it may take one or more test prints/copies
before you achieve your desired output.
11
SquareFold Trimmer User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving
Jam clearance
Important!: The top covers cannot be opened during normal
operation or when the machine is idle. The covers can be
opened only when an indicator is lit (refer to page 4) and a
jam/fault occurs within the SquareFold Trimmer Module.
If a jam occurs, the machine stops printing a fault code
appears on the SquareFold Trimmer Module Control Panel,
and a message may be displayed on the User Interface (UI).
Note: If a message is displayed on the machine's UI, it will
always indicate a jam/fault within the finisher.
Clear any paper jams that may occur
along the paper path
Tip: To determine if the jam/fault is within the finisher or
with the SquareFold Trimmer Module, always begin your
troubleshooting with the SquareFold Trimmer Module.
Use the following procedure to clear the jam or fault and
resume printing:
The Control Panel on the SquareFold Trimmer Module is
displaying a fault code and/or a fault indicator is lit:
1.
•
•
Yes: Continue to the next step of this procedure
No: Refer to the machine’s UI and clear any possible
finisher jam/fault.
Open the Top Left Cover and the Top Right Cover.
2.
12
SquareFold Trimmer User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving
Look for any jammed booklets within the SquareFold
Trimmer Module paper path and remove them.
3.
4. Check for loose trim scraps along the paper path and remove
them.
5. Close the Top Left and Right Covers.
Empty the Trimmer Waste Container.
6.
7.
8.
9.
Ensure that the Trimmer Waste Container is completely
pushed in/closed.
Ensure that all covers on the SquareFold Trimmer Module are
closed.
If the SquareFold Trimmer Module Control Panel and/or the
machine’s UI indicate there is a still a jam, recheck the
SquareFold Trimmer Module (steps 1-8).
If necessary, open the finisher to look for jams/faults along
the finisher path.
10.
11.
Follow the instructions displayed on the machine’s UI to
resume printing/copying.
SquareFold Trimmer User Guide
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving
Fault Codes
If a jam/fault occurs in the SquareFold Trimmer Module, a
fault code is displayed on the Control Panel. The machine’s
UI may also display a jam/fault message. The following
table provides a list of fault codes for the SquareFold
Trimmer Module and also provides a list of related finisher
fault codes.
Important!: The top covers cannot be opened during normal
operation or when the machine is idle. The covers can be
opened only when an indicator is lit (refer to page 4) and a
jam/fault occurs within the SquareFold Trimmer Module.
Fault code
Possible cause
Recommended solution
E100
E101
E102
E103
E104
E105
E106
E915
E916
E917
E918
E919
Jam/fault with the SquareFold Trimmer
Module
Open the Top Left and Right Covers of the SquareFold
Trimmer Module.
1.
Carefully remove all sheets and paper scraps from jam
clearance areas.
2.
Close the SquareFold Trimmer Module Top Left and Right
Covers.
3.
Check the Trimmer Waste Container:
4.
•
•
If full, empty the container and reinsert it
into the SquareFold Trimmer Module.
If the container is partially pulled out, push
it completely in.
If necessary, follow any remaining instructions on the
machine’s UI.
5.
6.
If fault persists, repeat Steps 1-5; if fault persists after that,
call for service.
14
SquareFold Trimmer User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving
Fault code
Possible cause
Recommended solution
E221
E222
E224
E226
E228
E230
E232
E234
E236
E238
E240
E242
E246
Jam or communication error with
the SquareFold Trimmer Module
Power off/on the copier/printer.
1.
E223
E225
E227
E229
E231
E233
E235
E237
E239
E241
E243
If fault persists, call for service.
2.
Jam/fault with the SquareFold
Trimmer Module
Open the Top Left and Right Covers of the SquareFold
Trimmer Module.
E303
E101
E102
E103
E104
E105
E106
1.
Carefully remove all sheets and paper scraps from jam
clearance areas.
2.
Close the SquareFold Trimmer Module Top Left and Right
Covers.
3.
Check the Trimmer Waste Container:
4.
•
•
If full, empty the container and reinsert it
into the SquareFold Trimmer Module.
If the container is partially pulled out, push it
completely in.
If machine’s UI continues to reflect a fault/jam, open the
finisher and remove any jams.
5.
6.
•
Close the finisher cover(s).
Follow the instructions shown on the machine’s UI to
resume printing/copying.
15
SquareFold Trimmer User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving
Fault code
Possible cause
Recommended solution
E303
E304
A top cover is open.
Open the Top Left and Right Covers of the SquareFold
Trimmer Module.
1.
Close the SquareFold Trimmer Module Top Left and Right
Covers.
2.
If fault persists, power off/on the copier/printer.
If fault persists, call for service.
3.
4.
E308
E940
E941
The Trimmer Waste Container is full or
has a fault.
Pull open the container and empty any trimmer scraps from
it.
1.
Reinsert the container into the SquareFold Trimmer Module.
2.
Ensure that the container is fully pushed in, and that the
indicator light is not lit.
3.
If fault persists, repeat Steps 1-3.
4.
5.
If fault persists, power off/on the copier/printer.
If fault persists, call for service.
6.
E943
Booklet Tray on the SquareFold
Trimmer Module is full.
Remove any booklets from the tray.
If fault persists, power off/on the copier/printer.
If fault persists, call for service.
1.
2.
3.
16
SquareFold Trimmer User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving
Fault code
Possible cause
Recommended solution
If machine’s UI continues to reflect a fault/jam, open the
finisher and remove any jams.
012 115
012 264
012 302
Finisher jam/fault
1.
2.
•
Close the finisher cover(s).
Follow the instructions shown on the machine’s UI to
resume printing/copying.
If necessary, power off/on the copier/printer.
If fault persists, call for service.
3.
4.
17
SquareFold Trimmer User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2008 Xerox Corporation. All rights reserved.
Xerox®, the sphere of connectivity design, and SquareFold® are trademarks of Xerox Corporation in the United States and/or other
countries.
Download from Www.Somanuals.com. All Manuals Search And Download.
|