Wasp Bar Code Scanner CCD Scanner User Manual

Barcode Scanning Made Easy

Programming Guide

Download from Www.Somanuals.com. All Manuals Search And Download.

CCD Scanner Programming Guide

Please Read

Note: The Wasp^®WCS3900 Series Scanners

are ready to scan the most popular barcodes out of the box.

This manual should only be used to make changes in the

configuration of the scanner for specific applications. These

scanners do not require software or drivers to operate. The

scanner enters data as keyboard data. Please review this manual

before scanning any of the programming barcodes in this manual.

Tech Tip

If you are unsure of the scanner configuration or have scanned

the incorrect codes, please scan the default barcode on page 7.

This will reset the scanner to its factory settings.

Check Version

No part of this publication may be reproduced or transmitted in any form or by any

means without the written permission of Wasp Barcode Technologies. The information

contained in this document is subject to change without notice.

Wasp and the Wasp logo are registered trademarks of Wasp Barcode Technologies. All other

trademarks or registered trademarks are the property of their respective owners.

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

Chapter 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Chapter 2. Barcode Symbologies . . . . . . . . . . . . . . . . . . . . .3

Chapter 3. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Chapter 4. Quick Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Chapter 5. Setup & Configuration . . . . . . . . . . . . . . . . .6-28

1. Factory Default & Keyboard Connection . . . .7

2. Autosense Stand Mode . . . . . . . . . . . . . . . . .7

3. Beep and Delay . . . . . . . . . . . . . . . . . . . . . .8-9

4. Upper/Lower Case . . . . . . . . . . . . . . . . . . . .10

5. Keyboard Language . . . . . . . . . . . . . . . . . . .11

6. Preamble/Postamble Configuration . . . . . . .12

7. Terminator/Code ID . . . . . . . . . . . . . . . . . . .13

8. Enable/Disable Barcode Symbologies . . .14-15

9. Barcode Symbology Settings . . . . . . . . .16-28

Code 39 . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Interleaved 2 of 5 and Code 93 . . . . . . . . . .17

Code 128 and UCC/EAN 128 . . . . . . . . . . . .18

MSI/Plessey . . . . . . . . . . . . . . . . . . . . . . . . .19

Codabar . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

UPC-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

UPC-A Supplemental / UPC-A to EAN-13 . .22

UPC-E . . . . . . . . . . . . . . . . . . . . . . . . . . .23-24

EAN-8 . . . . . . . . . . . . . . . . . . . . . . . . . . .25-26

EAN-13 . . . . . . . . . . . . . . . . . . . . . . . . . .27-28

Appendix A Barcode Test Symbols . . . . . . . . . . . . . . . .29-31

Appendix B ASCII Table . . . . . . . . . . . . . . . . . . . . . . . . .32-35

Appendix C Codes for PC . . . . . . . . . . . . . . . . . . . . . . . . . .36

Appendix D Technical Specifications . . . . . . . . . . . . . . . . . .37

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . .39

Product Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 1

Introduction

Barcoding is the most common Automated Data Collection (ADC)

technology providing timely, error-free information that can be used to

increase productivity, accuracy, and efficiency in the workplace. Virtually

every type of industry is using barcodes to replace keyboard data entry.

Studies have shown that a proficient data entry operator will make one

error for every 300 characters that are manually entered. The error rate

using barcodes is almost negligible and can be error-free using barcode

symbologies with the check digit enabled.

The Wasp Charged Coupled Device (CCD) technology is a technique

whereby a barcode is photographed, digitized, and electronically sampled

by built-in photodetectors. The detectors process the measurement of

every bar and space using the number of adjacent photodetectors which

contrast a black mark and a white space. Wasp WCS3900 Series Scanners

are extremely rugged since they have no moving parts. WCS3900 Series

Scanners plug into your PC’s USB or PS/2 port. As you scan a barcode,

the barcode value is automatically displayed in your application (eg. an

Excel cell, inventory application, etc.) where the blinking curser is, just as

if it had been typed on the keyboard.

Of all the hand held barcode scanning devices on the market, the CCD

reader is the easiest to use and most cost effective for the typical business

user. To activate the scanner, the user simply points the scanning aperture

towards the barcode, pulls the trigger, and aims the red LED beam across

the barcode. This scanner will work at a range of contact up to 1.5” away

from the barcode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 2

Barcode Symbologies

Barcodes are symbols consisting of a series of bars and spaces which can

be applied to packages, cartons, bottles, and other commercial products.

The bars and spaces in each symbol are grouped in such a way to

represent a specific ASCII character or function. The interpretation of

these groups is based on a particular set of rules called symbologies.

Various symbologies have been developed for particular applications.

Some examples are shipping and receiving, manufacturing, retail,

healthcare, transportation, document processing and tracking, and

libraries.

The resolution of a barcode is dependent on the narrowest element of a

barcode (X dimension), and can vary from high density (nominally less

than 0.009 in./0.23 mm), medium density (between 0.009 in./0.23 mm and

0.020 in./0.50 mm), and low density (greater than 0.020 in./0.50 mm).

Medium and low densities are the most common since these are the

easiest to read (scan) with nearly all scanning devices. The scanner can

read barcodes with X-dimensions as low as 5 mils (0.005 in/0.13mm).

WCS3900 Series Scanners can read the most popular barcode

symbologies including Code 39, Code 93, Code 128, Interleaved 2 of 5,

UPC-A, UPC-E, EAN/JAN-8, EAN/JAN-13, Codabar, and MSI/Plessey.

Please see test chart on pages 29-31.

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 3

Installation

WCS3900 USB Scanner

Trigger

Scanning Aperture

USB Port

1. Insert the USB cable directly into your PC’s USB port.

WCS3900 PS2 Scanner

Trigger

Scanning Aperture

Din-6M

Din-6F

1. Turn off your computer.

2. Unplug your PC keyboard cable and plug the male end (Din 6)

of the WCS3900 Scanner directly into your PC keyboard port.

Plug your keyboard cable into the other end (female Din 6) of the

the scanner.

3. Turn your computer on.

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 4

Quick Start

Your Wasp WCS3900 Series Scanners are ready for use. The default

settings of the scanners have been pre-programmed for the most common

barcode configurations. Use the “Setup & Configuration” sections only to

customize the scanners settings. Please review the “Enable Barcode

Symbologies” configuration beginning on page 14 to see the list of

barcodes symbologies which are enabled by default.

Tip:

• Use the pre-printed "Barcode Test Symbols" in Appendix A on pages

29-31 as a test chart to practice scanning.

PS2 Connection

USB Connection

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 5

Setup & Configuration

In order to configure Wasp WCS3900 Series Scanners, you must

familiarize yourself with the setup procedures on the following pages. The

default settings of the scanners are identified on each page and clearly

marked using an asterisk (*). The default settings have been

programmed for the most common barcode configurations. Use

the setup & configuration barcodes only to customize the

WCS3900 Series Scanner settings. If you need to configure the

Scanner, the default settings will be overwritten. All the programmed

settings are stored permanently in non-volatile memory; therefore, your

configuration will be maintained even if the keyboard power to the

WCS3900 Series Scanners are removed by turning off your PC.

In order to configure Wasp WCS3900 Series Scanners,

two basic steps need to be followed:

(1) Locate the group that contains the options to be changed.

(2) Scan the barcode representing the option to be changed.

The scanner will sound two beeps.

To change Minimum/Maximum Length:

(1) Scan the Minimum or Maximum Length barcode on page 15.

(2) Scan a 2 digit value from the ASCII table on pages 31-34

(3) Scan the Minimum or Maximum Length barcode again.

Example: To have a minimum length barcode of 1, you must scan a

0 then 1, then scan the minimum barcode again. To have a maximum

length barcode of 10, you must scan a 1 then 0, then scan the

maximum barcode again.

Download from Www.Somanuals.com. All Manuals Search And Download.

FACTORY DEFAULT & KEYBOARD CONNECTION

Chapter 5

Factory Default

Use the Factory Default barcode to reset the scanner to the Default settings.

Factory Default

Continuous Mode

Scan this continuous scan mode barcode to enable continuous scanning.

This feature allows the scanner to be used with a stand for hands free

scanning. The trigger is functionless in this mode. To turn this mode off

scan the default barcode above.

Continuous Scan Mode Enable

Keyboard Connection

The Keyboard Connection is used to program the Wasp WCS3900 Series

scanner for the type of host computer.

PC (USB or PS/2) *

Notebook

*Default

Download from Www.Somanuals.com. All Manuals Search And Download.

BEEP AND DELAY

Chapter 5

The 'Beep and Delay' configuration supports the general control options

for the WCS3900 Series Scanners. These options include the volume,

intercharacter delay, and interblock delay.

Interblock delay is the minimum time interval between two adjacent scans.

If the processing speed of your host device is slower than your scanning

speed, a longer interblock delay may ensure the data integrity.

Intercharacter delay is the time period that the scanner will wait before

transmitting the next character. If data sent by the scanner has incorrect or

missing characters, a longer intercharacter delay may solve the problem.

The intercharacter delay should be changed only if the transfer rate cannot

be maintained between the scanner and the keyboard buffer of the

computer.

Note: The default for the intercharacter delay is set to '140us' and is the

most common configuration; however, your PC may be different. When

you scan a barcode, if stray or scrambled characters appear, increase the

intercharacter delay to slow down the transfer rate.

Beep Settings

Beep Off

Beep Hi

Beep Low to High

Beep Low

Beep Medium *

Beep High to Low

*Default

Download from Www.Somanuals.com. All Manuals Search And Download.

BEEP AND DELAY

Chapter 5

Interblock Delay

Intercharacter Delay

0ms *

140us *

10ms

50ms

500us

1ms

100ms

200ms

500ms

4ms

16ms

*Default

Download from Www.Somanuals.com. All Manuals Search And Download.

UPPER/LOWER CASE

Chapter 5

• Caps Lock Auto (For PC XT/AT only):

In Auto mode, the scanner will keep track of the Caps Lock

status automatically. For some PCs, the scanning performance

may be compromised because of the auto tracing. If the

scanning performance is poor (or cannot scan) or the scanner

cannot output the upper/lower case characters correctly, try to

select one of the next two choices instead of auto tracing.

• Caps Lock Off:

When the keyboard is in the unshifted state

(Caps Lock is not pressed), select “Lower Case.”

• Caps Lock On:

When the keyboard is in the shifted state (Caps Lock is on),

select “Upper Case.”

Caps Lock On

Caps Lock Off *

Caps Lock Auto

*Default

_{Download from Www.Somanuals.co}1_m0_{. All Manuals Search And Download.}

KEYBOARD LANGUAGE

Chapter 5

The ‘Keyboard Language’ setting controls the key codes for your

keyboard’s language.

U.S. *

German

French

Spanish

Italian

*Default

Download from Www.Somanuals.com. All Manuals Search And Download.

PREAMBLE/POSTAMBLE CONFIGURATION

Chapter 5

The ‘Preamble/Postamble’ configuration is used to add a prefix or suffix

set of characters to the barcode value. Up to 8 characters may be added

for each option separately. Preamble and postamble characters can

function concurrently, but need to be configured separately.

To add preamble or postamble characters, follow the steps below:

1) Scan the ‘Clear Pre/Postamble’ barcode on this page.

2) Scan the ‘Preamble’ or ‘Postamble’ barcode.

3) Use Appendix B on pages 32-35 to locate the characters you want to

add as preamble or postamble characters. Make sure that you scan

the barcode associated with each letter before preceding to the next

character. For example, to add the letter “A,” scan the barcode

corresponding to the letter “A” on page 34. The letter “A” will always

appear in your data as prefix or suffix to the barcode value.

4) Scan the corresponding 'Pre/Postamble' barcode on this page to exit

this setting.

Clear Pre/Postamble

Preamble

Postamble

_{Download from Www.Somanuals.co}1_m2_{. All Manuals Search And Download.}

TERMINATOR/CODE ID

Chapter 5

Terminator

The ‘Terminator’ option is used to specify the end-of-text message and is

primarily used to denote the end of the barcode value.

CR *

None

Tab

Space

ESC

CR + LF

Code ID

The ‘Code ID’ option sends a specific value when a particular barcode

symbology is scanned. For example, if ‘Code ID’ is enabled and Code 39

is scanned, an “M” will appear in the data stream in front of the

barcode value.

O - MSI/Plessey T - EAN 128

S - EAN 8

E - UPC E

A - UPC A

F - EAN 13

L - Code 93

K - Code 128

N - Codabar

D - Full ASCII Code 39

M - Std. Code 39

I - Interleaved 2 of 5

Code ID On

Code ID Off *

*Default

Download from Www.Somanuals.com. All Manuals Search And Download.

ENABLE/DISABLE BARCODE SYMBOLOGIES

Chapter 5

Enable

Disable

Enable All

MSI Plessey

Interleaved 2 of 5 *

Code 128 *

Disable All

MSI Plessey *

Interleaved 2 of 5

Code 128

Codabar *

Codabar

Code 39 *

Code 39

*Default

_{Download from Www.Somanuals.co}1_m4_{. All Manuals Search And Download.}

ENABLE/DISABLE BARCODE SYMBOLOGIES

Chapter 5

Enable

Disable

UPC A *

UPC E *

EAN 8 *

EAN 13 *

Code 93

UPC A

UPC E

EAN 8

EAN 13

Code 93 *

*Default

Download from Www.Somanuals.com. All Manuals Search And Download.

CODE 39 SETTINGS

Chapter 5

Code 39 is variable length and is the most frequently used symbology in

industrial barcode systems today. It is extensively used within the

Department of Defense (DOD). The principal feature is to encode

messages using the full alphanumeric character set. Standard Code 39

contains only 43 characters (0-9, A-Z, $, /, %, +, -, ., SPACE) and can be

extended to a 128 character symbology (full ASCII) by combining one of

the special characters (S, /, %, +) with a letter (A-Z) to form the characters

that are not present in the standard Code 39 symbology.

See page 6 for information on setting the minimum and maximum lengths.

Enable Code 39 *

Disable Code 39

Enable Code 39

Full ASCII *

Disable Code 39

Full ASCII

Check Digit Do

Not Calculate *

Check Digit Calculate

And Send

Check Digit Calculate

But Do Not Send *

Minimum Length (1 *)

Maximum Length (48 *)

*Default

_{Download from Www.Somanuals.co}1_m6_{. All Manuals Search And Download.}

INTERLEAVED 2 OF 5 AND CODE 93 SETTINGS

Chapter 5

Interleaved 2 of 5 is a variable length, even numbered, numeric barcode.

It is typically used in industrial and master carton labeling and also in the

automobile industry. The symbology uses bars to represent the first digit

of a pair and the interleaved (white) spaces to represent the second digit

of a character pair.

See page 6 for information on setting the minimum and maximum lengths.

Enable Interleaved

2 of 5 *

Disable Interleaved

2 of 5

Check Digit Do

Not Calculate *

Check Digit Calculate

And Send

Check Digit Calculate

But Do Not Send

Minimum Length (6 *)

Maximum Length (48 *)

Code 93 encodes the full 128 ASCII character set using 9 modules

arranged into 3 bars with adjacent spaces. Two of the characters are

check characters. Code 93 is similar to Code 39 but encodes more

characters per inch.

Enable Code 93

Disable Code 93 *

Minimum Length (6 *)

Maximum Length (48 *)

*Default

Download from Www.Somanuals.com. All Manuals Search And Download.

CODE 128 AND UCC/EAN 128 SETTINGS

Chapter 5

Code 128 is the most flexible of all the common linear symbologies.

It supports alpha and numeric characters easily, has the highest number

of characters per inch, and is variable length.

See page 6 for information on setting the minimum and maximum lengths.

Enable Code 128 *

Disable Code 128

Minimum Length (5 *)

Maximum Length (48 *)

UCC/EAN 128

Enable *

UCC/EAN 128

Disable

UCC/EAN 128

Code ID Enable

Code ID Disable *

Function 1

Character Send

Character Do Not Send *

To Define UCC/EAN 128 Group Separator:

1. Scan Define UCC/EAN 128 Group Separator

2. Scan ASCII code from pages 31-34

3. Scan Define UCC/EAN 128 Group Separator

Note: Default Group Separator is GS

*Default

Define UCC/EAN 128

Group Separator

_{Download from Www.Somanuals.co}1_m8_{. All Manuals Search And Download.}

MSI PLESSEY SETTINGS

Chapter 5

MSI Plessey is a variable length numeric symbology and is primarily used

in marking retail shelves. Each character consists of four bars with

intervening spaces for each encoded digit, one or two symbol check digits,

and a reverse start code.

See page 6 for information on setting the minimum and maximum lengths.

Enable

Disable *

Check Digit Verify

And Send *

Check Digit Verify

And Do Not Send

Check Digit Double

MOD 10

Check Digit Double 11

Plus MOD 10

Check Digit Single MOD 10

Minimum Length (6 *)

Maximum Length (48 *)

*Default

Download from Www.Somanuals.com. All Manuals Search And Download.

CODABAR SETTINGS

Chapter 5

Codabar is a variable length symbology capable of encoding six special

alphanumeric characters, capital letters A through D, T, N, *, E, and all

numeric digits. Codabar is one of the oldest barcode symbologies and is

still used in some library applications. It should not be considered for new

applications except under unusual circumstances.

See page 6 for information on setting the minimum and maximum lengths.

Codabar Enable *

Send Start/Stop *

Codabar Disable

Do Not Send

Start/Stop

Check Digit

Do Not Verify *

Check Digit

Verify And Send

Check Digit Verify

And Do Not Send

Minimum Length (6 *)

Maximum Length (48 *)

*Default

_{Download from Www.Somanuals.co}2_m0_{. All Manuals Search And Download.}

UPC-A SETTINGS

Chapter 5

UPC-A (Universal Product Code-A) is fixed length and is the most

common UPC barcode for retail product labeling. It is seen in most

grocery stores across the United States. The symbology encodes a

12-digit number. The first six digits are assigned from the Uniform Code

Council (UCC). The next five digits are assigned by the manufacturer,

and the final digit is a modulo 10 check digit. The nominal height for the

UPC-A barcode is one inch. The reduced size is 80% of the nominal size.

UPC-A Enable *

Send Leading Digit *

Send Check Digit *

UPC-A Disable

Do Not Send

Leading Digit

Do Not Send

Check Digit

*Default

Download from Www.Somanuals.com. All Manuals Search And Download.

UPC-A SUPPLEMENT SETTINGS / UPC-A TO EAN-13

Chapter 5

This option enables the two and five digit supplements for the UPC and

EAN/JAN barcode symbologies.

5 Digit Supplement

Enable

5 Digit Supplement

Disable *

2 Digit Supplement

Enable

2 Digit Supplement

Disable *

Transmit if Present

Must Be Present *

This option expands the UPC-A barcode to EAN-13.

PostScript Picture

(UPCtoEAN13_on.eps)

(UPCtoEAN13_off.eps)

UPC-A to EAN-13

Enable

UPC-A to EAN-13

Disable *

*Default

_{Download from Www.Somanuals.co}2_m2_{. All Manuals Search And Download.}

UPC-E SETTINGS

Chapter 5

UPC-E (Universal Product Code-E) is fixed length and is a compressed

six digit code used for marking small packages, including magazines and

paperback books. UPC-E symbols are UPC-A symbols that have been

zero suppressed (i.e. consecutive zeros are not included in the symbol).

The printed value of the UPC-E code is a twelve digit code. The nominal

height for the UPC-E barcode is one inch. The reduced size is 80% of

the nominal size.

UPC-E Enable *

Send Leading Digit *

Send Check Digit *

UPC-E Disable

Do Not Send

Leading Digit

Do Not Send

Check Digit

Expand to UPC-A

Off *

*Default

Download from Www.Somanuals.com. All Manuals Search And Download.

UPC-E SUPPLEMENT SETTINGS

Chapter 5

This option enables the two and five digit supplements for the UPC and

EAN/JAN barcode symbologies.

5 Digit Supplement

Enable

5 Digit Supplement

Disable *

2 Digit Supplement

Enable

2 Digit Supplement

Disable *

Transmit if Present

Must Be Present *

*Default

_{Download from Www.Somanuals.co}2_m4_{. All Manuals Search And Download.}

EAN-8 SETTINGS

Chapter 5

The EAN/JAN-8 is fixed length and is similar to the UPC-E code, but includes

two more digits for the country code. The nominal height for the EAN/JAN-8

barcode is one inch. The reduced size is 80% of the nominal size.

EAN-8 Enable *

Send Leading Digit *

Send Check Digit *

EAN-8 Disable

Do Not Send

Leading Digit

Do Not Send

Check Digit

*Default

Download from Www.Somanuals.com. All Manuals Search And Download.

EAN-8 SUPPLEMENT SETTINGS

Chapter 5

This option enables the two and five digit supplements for the UPC and

EAN/JAN barcode symbologies.

5 Digit Supplement

Enable

5 Digit Supplement

Disable *

2 Digit Supplement

Enable

2 Digit Supplement

Disable *

Transmit if Present

Must Be Present *

*Default

_{Download from Www.Somanuals.co}2_m6_{. All Manuals Search And Download.}

EAN-13 SETTINGS

Chapter 5

The EAN/JAN-13 (European Article Number/Japanese Article Number)

is fixed length and is similar to the UPC-A symbology, but encodes a

13th digit. The nominal height for the EAN/JAN-8 barcode is one inch.

The reduced size is 80% of the nominal size.

EAN-13 Enable *

EAN-13 Disable

Send Leading Digit *

Do Not Send

Leading Digit

Send Check Digit *

Do Not Send

Check Digit

ISBN Enable

ISSN Enable

ISBN Disable *

ISSN Disable *

*Default

Download from Www.Somanuals.com. All Manuals Search And Download.

EAN-13 SUPPLEMENT SETTINGS

Chapter 5

This option enables the two and five digit supplements for the UPC and

EAN/JAN barcode symbologies.

5 Digit Supplement

Enable

5 Digit Supplement

Disable *

2 Digit Supplement

Enable

2 Digit Supplement

Disable *

Transmit if Present

Must Be Present *

*Default

_{Download from Www.Somanuals.co}2_m8_{. All Manuals Search And Download.}

BARCODE TEST SYMBOLS

Appendix A

Note: Make sure that the appropriate barcode symbology is configured

properly and enabled before trying to scan. Use the 'Barcode Symbologies'

configuration beginning on page 14 to enable specific symbologies.

Code 39*

Code 93

Interleaved 2 of 5 *

Codabar *

Code 128*

MSI/Plessey

*Default

Download from Www.Somanuals.com. All Manuals Search And Download.

BARCODE TEST SYMBOLS

Appendix A

UPC-A*

UPC-A

w/5 digit supplement

UPC-A

w/2 digit supplement

UPC-E*

UPC-E

w/5 digit supplement

UPC-E

w/2 digit supplement

*Default

_{Download from Www.Somanuals.co}3_m0_{. All Manuals Search And Download.}

BARCODE TEST SYMBOLS

Appendix A

EAN/JAN-13*

EAN/JAN-13

w/5 digit supplement

EAN/JAN-13

w/2 digit supplement

EAN/JAN-8*

EAN/JAN-8

w/5 digit supplement

EAN/JAN-8

w/2 digit supplement

*Default

Download from Www.Somanuals.com. All Manuals Search And Download.

ASCII TABLE

Appendix B

Use this ASCII Table to add preamble and postamble characters to your

barcode value. Please refer to the appropriate configuration section for the

number of characters that can be configured.

DC4

NAK

SYN

ETB

CAN

NUL

SOH

STX

ETX

EOT

ENQ

ACK

BEL

DLE

DC1

DC2

DC3

SUB

ESC

_{Download from Www.Somanuals.co}3_m2_{. All Manuals Search And Download.}

ASCII TABLE

Appendix B

)

;

(

Download from Www.Somanuals.com. All Manuals Search And Download.

ASCII TABLE

Appendix B

[

Script Pic

(G.eps)

]

_{Download from Www.Somanuals.co}3_m4_{. All Manuals Search And Download.}

ASCII TABLE

Appendix B

{

}

DEL

Download from Www.Somanuals.com. All Manuals Search And Download.

FUNCTION CODE FOR PC

Appendix C

F10

F11

Cursor Right

Cursor Up

Cursor Left

Cursor Down

Page Up

Page Down

Ins

F12

Tab

Back Tab

Esc

End

Home

Enter

Back Space

Del

_{Download from Www.Somanuals.co}3_m6_{. All Manuals Search And Download.}

TECHNICAL SPECIFICATIONS

Appendix D

MODEL

WCS3900

OPTICAL

Scanning Width

Depth of Field

Scan Rate

3.00” (76mm)

contact to 5mm (approx 1.5”)

45 scans / second

Decode Rate

100 scans / second

ELECTRICAL

Light Source

Sensor

Operating Voltage

Current Consumption

660 nm red visible LED

2088 linear imager

+5 VDC ± 5%

Decoded: Standby

<30 mA/ Working <95 mA

USB or PS/2

Output

MECHANICAL

Dimensions

Weight

L7.40” x W3.62” x H1.06”

125 g (without cable)

6 ft

Cable

Housing

ABS

ENVIRONMENTAL

Operating Temperature

Storage Temperature

Relative Humidity

0˚C to 50˚C

-20˚C to 60˚C

20% to 80% non-condensing

Conforms FCC Class A and

CE requirements

Safety Certification

Download from Www.Somanuals.com. All Manuals Search And Download.

Warranty Information

Wasp Barcode Technologies products are warranted against defects in

workmanship and materials for a period of one year from the date of

shipment, provided that the product remains unmodified and is operated

under normal and proper conditions.

This warranty is limited to repair or replacement at Wasp Barcode

Technologies option, with reasonable promptness after being notified.

These provisions do not prolong the original warranty term for any

product which has been repaired or replaced by Wasp Barcode

Technologies.

This warranty applies to the original owner and does not extend

to any product which has been subject to misuse, neglect,

accidental damage, unauthorized repair, or tampering.

No other express warranty is given. The replacement or repair of a

product is your exclusive remedy. Any other implied warranty of mer-

chantability or fitness is limited to the duration of this written warranty.

Some states, provinces, and countries do not allow limits on how long an

implied warranty lasts, so the above limitation may not apply to you.

In no event shall Wasp Barcode Technologies be liable for consequential

damages. Some states, provinces, and countries do not allow the

exclusion or limitation of incidental or consequential damages, so the above

limitations may not apply to you.

_{Download from Www.Somanuals.co}3_m8_{. All Manuals Search And Download.}

FAQ

Q: How do I configure the scanner for a notebook (or laptop) computer?

A: Scan the “Notebook” barcode on page 7.

Q: How do I change the terminator to a Tab?

A: Scan the “Tab” barcode on page 13.

Q: How do I remove the terminator?

A: Scan the “None” barcode on page 13.

Q: How do I enable the Full ASCII character set for the Code 39

barcode symbology?

A: Scan the following “Enable Code 39 Full ASCII” barcode on page 14.

Download from Www.Somanuals.com. All Manuals Search And Download.

Product Support

If you experience any problems with the Wasp WCS3900 Series

Scanners that you are unable to resolve, call for technical assistance at

(214) 547-4100 ext 2, Monday through Friday, 8:00 AM - 5:00 PM Central

Standard Time. Visit www.waspbarcode.com/support anytime.

_{Download from Www.Somanuals.co}4_m0_{. All Manuals Search And Download.}

Wasp Barcode Technologies

1400 10th Street

Plano, TX 75074

Download from Www.Somanuals.com. All Manuals Search And Download.

www.waspbarcode.com

0707US

Tech Craft TV Video Accessories SWBL48 User Manual
Telex Wireless Office Headset PH 3500 User Manual
Timex Heart Rate Monitor NA685 095000 User Manual
TOA Electronics Security Camera C CV854D 3 CE User Manual
Topcom Blood Pressure Monitor BPM WRIST 2301B User Manual
Trane Thermostat XT300C User Manual
Tripp Lite Power Supply 1400 3000 VA User Manual
True Manufacturing Company Refrigerator TGU 2 User Manual
United States Stove Furnace 22AF User Manual
ViewSonic Flat Panel Television VS11620 1M User Manual