VIZIO
QUICK START GUIDE
Download from Www.Somanuals.com. All Manuals Search And DMownlooad.del: SB4020M-B0
PACKAGE CONTENTS
Remote Control
with Battery
High Definition Sound Bar
Wall Mount Brackets (2)
Optical Cable
Power Adapter w/Cable
VIZIO
QUICK START GUIDE
Model: SB4020M
Wall Mount Template
Download from Www.Somanuals.com. All Manuals Search And Download.
Stereo RCA to 3.5mm
Audio Cable
This Quick Start Guide
3
CONTROLS & CONNECTIONS
Input
Info Display
Displays volume, input, and other information.
Press to change input source.
Volume Up/Down
Press to increase or
decrease overall
volume.
Power
Press to turn
on or off.
Power Light
When Sound Bar is
on, this light is on.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Digital Optical In
Digital Coaxial In
Analog 3.5mm In
Wall Mount Posts
USB
1.85
USB
1.85
Power PDoorwtnload from Www.Somanuals.com. All Manuals Search AnUdSDBowPnlooadrt.
5
FIRST-TIME SETUP
1
1.85
CHOOSE ONE CABLE AND
CONNECT IT TO YOUR TV
BETTER
GOOD
GOOD
BETTER
DIGITAL OPTICAL
CABLE
DIGITAL COAXIAL
CABLE*
3.5MM
CABLE
3.5MM TO RCA
CABLE
Connect the Sound Bar to your TV using one of the connection types to
the left. Choose the best possible connection type.
Be sure the TV port is an audio output, not an audio input.
*Not Included
Download from Www.Somanuals.com. All Manuals Search And Download.
6
1.85
3
2
USB
1.85
4
Plug in
Sound Bar
Download from Www.Somanuals.com. All Manuals Search And Download.
7
5
Sound Bar is centered
below the TV, close to ear
level.
For the best surround sound experience, position the Sound Bar as shown.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Gently pull the plastic tab from
the back of the remote control.
(The plastic tab can be thrown away)
6
7
Power
Turn your TV on, then press the Power button
on the remote to turn the Sound Bar on.
Press the Input button to switch between
audio sources. For example, if you
connected your TV to Input 1, set the Sound
Bar to Input 1.
Setup is complete.
Input
Download from Www.Somanuals.com. All Manuals Search And Download.
9
USING THE REMOTE
Power
Press to turn on or off.
Play/Pause
Press to play or pause track.
Volume Up
Press to increase
overall system volume.
Rewind/Previous
Press and hold to rewind.
Press to go to last track.
Fast Forward/Next
Press and hold to fast forward.
Press to advance to next track.
Volume Down
Press to decrease
overall system volume.
Mute
Press to turn the sound on or off.
Menu
Input
Press to output audio from the
selected device port. Press
repeatedly to cycle through
available inputs.
Press to display menu options.
SRS TruVolume
SRS TruSurround HD
When on, SRS TruVolume intelligently normalizes
volume fluctuations due to television commercials
or channel changes.
When on, SRS TruSurround HD delivers enveloping,
immersive surround sound, making every seat in
the room the “sweet spot”.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
EXTENDED FUNCTIONS USING BUTTON COMBINATIONS
Mute/Unmute = Volume Up + Volume Down
Press and hold both buttons for 1 second to
mute/unmute your Sound Bar.
+
Factory Reset = Power + Volume Up + Volume Down
Press and hold all 3 buttons for 10 seconds to return
your Sound Bar to its factory default settings.
+
+
THE SOUND BAR INFO DISPLAY
Volume - Increase or decrease volume
SRS TruVolume - Toggle SRS TruVolume on or off
Volume
15
TruVol
Bass Level - Increase or decrease bass level
SRS TruSurround - Toggle SRS TruSurround on or off
Bass
9
TSHD
Treble Level - Increase or decrease treble level
Brightness Level - Increase or decrease brightness level
Treble
9
Bright
To conserve energy, after displaying a message for several seconds, the Info Display automatically shuts off.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
WALL MOUNTING THE SOUND BAR
1
Use a phillips-head screwdriver to remove the screws from the Sound Bar stands.
Reinsert the screws for safekeeping. Save the stands for future use.
2
MARK HERE
MARK HERE
Place the included wall mounting template against the wall under your TV.
Mark the locations of the 4 bracket holes using a pencil.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
3
Recommended screw diameter: 4mm
Recommended screw length: 8mm or greater
The screws and anchors depicted are not included. The
appropriate screws and anchors will depend on the material of
your wall. Be sure that the screws and/or anchors you use are
securely fastened and can support the weight of the Sound Bar.
Attach the brackets to the wall as shown. Gently hang the Sound Bar on the brackets using the
wall mount posts on the back of the Bar.
Use the cable management hooks to route your audio cables to your TV.
4
USB
1.85
Download from Www.Somanuals.com. All Manuals Search And Download.
13
REPLACING THE REMOTE BATTERY
1
2
Insert a flat-head screwdriver into the slot as
When replacing an old battery with a
new CR2032, be sure that the + sign on
the battery is facing up. Push the battery
cover until it clicks back into place.
shown. Gently push down on the tab, then
press and pull downward on the battery
cover to open.
PROGRAMMING YOUR UNIVERSAL REMOTE
Many universal remote controls can be programmed to control your Sound Bar.
As each universal remote works differently, you should refer to your remote’s user manual for
instructions on programming.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
CONNECTING ADDITIONAL DEVICES
Connect up to four different devices to the Sound Bar
(devices shown are examples–you can use any device).
To listen to a device, change the input source on the Sound Bar.
USB
1.85
Optical, Coaxial, and 3.5mm
cables transmit audio only. If
connecting a video device,
you will need a separate
video connection from the
device to your TV.
DIGITAL OPTICAL
CABLE
DIGITAL COAXIAL
CABLE*
3.5mm
CABLE
USB THUMB DRIVE™
Game Console
Network Media Player
Tablet/MP3 Player/Laptop
Download from Www.Somanuals.com. All Manuals Search And Download.
*Not Included
15
HELP & TROUBLESHOOTING
All VIZIO products include FREE lifetime technical support.
The VIZIO support team is highly trained and is based in the United States.
We can help with:
• Product Setup
• Technical Problems
• Warranty Questions
• And More
Hours of operation:
Monday - Friday: 5 AM TO 9 PM (PST)
Saturday - Sunday: 8 AM TO 4 PM (PST)
Phone: (877) 698-4946 (TOLL-FREE)
Email: techsupport@VIZIO.com
Web:
• Press the POWER button on the remote control or on the top of your Sound Bar.
• Ensure the power cord is securely connected.
• Ensure the light on the power adapter is glowing green.
There is no power.
There is no sound.
• Plug a different device into the electrical outlet to verify that the outlet is working correctly.
• Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar.
• Press MUTE on the remote to ensure the Sound Bar is not muted.
• Press INPUT on the remote or on the top of your Sound Bar to select a different input source.
• If you are using a SPDIF/Optical connection, make sure your TV is set to PCM audio output.
• Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or
STANDARD, not VARIABLE. Consult your TV’s user manual for more detailed information.
• If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not
muted.
• If using Bluetooth, ensure that your source device is paired with the Sound Bar.
• Ensure all cables and wires are securely connected.
I hear buzzing or
humming.
• Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the
problem may be with the original device.
Download from Www.Somanuals.com. All Manuals Search And Download.
• Connect your device to a different input on the Sound Bar.
• Make sure the plastic tab has been removed from the battery compartment.
• Replace the remote battery with a new one.
• Point the remote directly at the Sound Bar when pressing a button.
• If using a Bluetooth connection, some of the buttons on the remote may not be supported by the
streaming application. (e.g., a music streaming app may not support the Back/Fast Rewind button.)
The remote
isn’t working.
• To activate SRS TSHD, press the Menu button on the remote and use the arrow keys to scroll to the TSHD
How do I listen to
SRS TruSurround or
Dolby Digital?
screen to toggle between on and off.
• To listen to Dolby Digtal, your device must be playing content in Dolby Digital format. Dolby Digital is
only available over Digital Coaxial or Digital Optical.
• Night mode reduces bass output of the Sound Bar so that listening to the bar is less likely to disturb
others. SRS TruVolume™ reduces high volume content like commercials and increases low volume
content, like dialog, so that you have a more uniform listening experience. Night Mode and SRS
TruVolume can be turned on independently or together. • To listen to Dolby Digtal, your device must
be playing content in Dolby Digital format. Dolby Digital is only available over Digital Coaxial or Digital
Optical.
When should I use
Night Mode or
SRS TruVolume™?
• Adjust the bass and trebel levels using the remote
• Try enabling/disabling SRS TruSurround.
• Disable Night Mode if bass level is too low by pressing the Menu button on the remote and adjusting
the settings.
I would like to adjust
the sound on the
Sound Bar.
I want to return
my Sound Bar to
factory settings.
• Press and hold the Power, Volume Up, and Volume Down buttons for 10 seconds to return your Sound
Bar to its factory default settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
ONE-YEAR LIMITED WARRANTY
ON PARTS AND LABOR
Covers units purchased as new in United States and Puerto Rico Only
VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90)
days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option
and discretion.
To obtain warranty service, contact VIZIO Technical Support via email: [email protected] or via phone at 877 MY VIZIO (877.698.4946) from 5:00AM to 9:00PM Monday through
CENTER. Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period.
Parts and Labor
There will be no charge for parts or labor during the warranty period. Replacement parts and Products may be new or recertified at VIZIO’s option and sole discretion. Replacement
parts and Products are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service or replacement, whichever is greater.
Type of Service
Defective Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return
shipping to the customer. PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE.
Product returns to VIZIO’s service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection. VIZIO Technical
Support will provide instructions for packing and shipping the covered Product to the VIZIO service center.
Limitations and Exclusions
VIZIO’s one-year limited warranty only covers defects in materials and workmanship. This warranty does not cover, for example: cosmetic damage, normal wear and tear, improper
operation, improper voltage supply or power surges, signal issues, damages from shipping, acts of God, any type of customer misuse, modifications or adjustments, as well as
installation and set-up issues or any repairs attempted by anyone other than by a VIZIO authorized service center. Products with unreadable or removed serial numbers, or requiring
routine maintenance are not covered. This one year limited warranty does not cover Products sold “AS IS”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES
RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR
LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL
LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.
SPECIFICATIONS
Two 3” Drivers
95 dB
Sound Bar:
Inputs:
Sound Pressure Level:
Frequency Response (Sound Bar):
Voltage:
1 x 3.5mm Stereo Audio
1 x RCA Stereo Audio
1 x Optical (Toslink)
90Hz-20kHz
100-240 VAC, 50-60 Hz
FCC, NOM, cULus
1 x USB (for MP3 Playback)
1 x RCA Subwoofer Out
Compliances:
Outputs:
Download from Www.Somanuals.com. All Manuals Search And Download.
18
LEGAL & COMPLIANCE
FCC Class B Radio Interference Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
Notice:
1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct
such interference.
RF Exposure Information
This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to
radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
IC Statement
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired
operation of the device.
and
are trademarks of SRS Labs, Inc.
TruSurround HD and TruVolume technologies are
incorporated under license from SRS Labs, Inc.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
This product qualifies for ENERGY STAR in the
“factory default” setting and this is the setting in
which power savings will be achieved. Changing
the factory default settings or enabling other
features will increase power consumption that
could exceed the limits necessary to qualify for
ENERGY STAR rating.
Disposal and Recycling
You must dispose of this product properly, according to local laws and regulations. Because this
product contains electronic components and a battery, it must be disposed of separately from
household waste. Contact local authorities to learn about disposal and recycling options.
Other:
Image(s) used under license from Shutterstock.com
Download from Www.Somanuals.com. All Manuals Search And Download.
19
© 2013 VIZIO INC. ALL RIGHTS RESERVED.
130205CH-NC
Download from Www.Somanuals.com. All Manuals Search And Download.
|