Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM
REQUIREMENTS
Store’n’Go Professional
Host Interface
Universal Serial Bus
(USB 2.0 High Speed and Full Speed)
Hardware:
Store ‘n’ Go Professional plugs into any PC
or Apple Macintosh with a USB port.
Power Supply
USB bus powered
No external power required
(high power device)
Power consumption
Transfer Rate
Standby:
790uA (typical), 1.0mA (max)
Read/write:
Software:
High Speed: 105mA (typical), 125mA (max)
Full Speed: 75mA (typical), 105mA (max)
No special software is required for systems running on
Windows 2000, Windows Millennium Edition, Windows XP,
Linux 2.6.0, and Macintosh OS 9.x, 10.x. For systems running
Windows 98 driver files must be installed before using
Store ‘n’ Go Professional for the first time.
High Speed: Read upto 23MB/sec,
write upto 14MB/sec
Full Speed: Read upto 1MB/sec,
write upto 1MB/sec
A Windows 98 driver is available at our web site
Supported Operating
Systems
Windows 98SE, 2000, Me, XP
Macintosh 9.x, 10.x
Note that earlier versions of windows including Windows 95
do not support USB Mass Storage Class Devices and
consequently are not compatible with Store ‘n’ Go Professional.
Linux kernel version 2.6.x (tested with
RedHat, Suse and Turbo Linux)
LED Indicators
LED flashing slowly –
connected and inactive
LED flashing rapidly –
transmitting/receiving data
LED Colours –
PRECAUTIONS
• When the indicator light is blinking rapidly, Store ‘n’ Go
Professional is transferring data between itself and
the host computer. Do not remove Store ‘n’ Go
Blue USB High Speed Mode
– Red USB Full Speed Mode
Professional until the light slows to a slow, regular pulse.
• Deactivate Store ‘n’ Go Professional before removing it
from the USB port.
Operating Temperature
Storage Temperature
0° C to 60° C
-40°C to 70°C
• Keep your Store ‘n’ Go Professional away from water,
extreme moisture or heat.
Environment
Altitude
Relative humidity 5% to 90%
Operating 6,096m (20,000ft)
Storage 12,192m (40,000ft)
• Keep your Store ‘n’ Go Professional away from
electrostatic sources and magnetic fields.
• Store your Store ‘n’ Go Professional with its cap in place.
Vibration
5G RMS, 10 to 2,000Hz,
0.5 Oct/min sweep rate
• Do not force Store ‘n’ Go Professional into the USB port.
If the port resists smooth insertion of Store ‘n’ Go
Professional, check that the device is positioned
with the USB icon on top and that the port is
free of obstructions.
Shock
Non operating 55G, 11ms, half-sine
FCC, CD, VCCI, CE, TUV, WHQL
Certification
VERBATIM LIMITED LIFETIME WARRANTY
Verbatim Corporation warrants this product to be free from defects in material and workmanship If this product is found to be
defective, it will be replaced at no cost to you. You may return it with your original cash register receipt to the place of purchase
or contact Verbatim.
In the following European countries, Austria, Belgium, Denmark, Finland, France, Germany, Greece, Hungary, Italy, Luxembourg,
Monaco, Netherlands, Norway, Poland, Portugal, Republic of Ireland, Spain, Sweden, Switzerland, call 00 800 3883 2222.
All other European countries call +353 61 226586.
You can email drivesupport@verbatim-europe.com.
In the U.S. and Canada, call 800-538-8589 or email techsupport@verbatim.com.
Product replacement is your sole remedy under this warranty, and this warranty does not apply to normal wear or to damage
resulting from abnormal use, misuse, abuse, neglect or accident, or to any incompatibility or poor performance due to the specific
computer software or hardware used. VERBATIM WILL NOT BE LIABLE FOR DATA LOSS OR ANY INCIDENTAL, CONSEQUENTIAL
OR SPECIAL DAMAGES, HOWEVER CAUSED, FOR BREACH OF WARRANTIES OR OTHERWISE. This warranty gives you specific
legal rights and you may also have other rights which vary from state to state or country to country.
NOTE: Verbatim Corporation may at any time revise the content of this user guide without further notice.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Store 'n' Go PROFESSIONAL
Business Uses
INSTALLATION
• Otez le capuchon.
• Save documents
and presentations
• Branchez le Store ‘n’ Go Professional au port de série universal (USB).
1 Une impulsion lumineuse lente indique que le Store ‘n’ Go
Professional est en attente d'utilisation.
• Back up
important files
2 Une impulsion lumineuse rapide indique que la transmission
des données est en cours..
• Transfer files
between computers
No retirez pas le Store ‘n’ Go Professional tant que
la lumiere clignote.
• Take your important
files with you
wherever you go
WINDOWS
Pour Lancer le Système
• Cliquez sur <<Poste de travail>> et cliquez sur <<Disque amovible>>.
Personal Uses
Pour Retirer le Store ‘n’ Go Professional
• Pour retirer le Store ‘n’ Go Professional, cliquez deux fois
sur l’icône d <<Arrêt du périphérique USB à disques
magnétiques>> situé sur le côté droit de la barre d’outils.
• Download books
and music from
the internet
• Retirez le Store ‘n’ Go Professional.
• Transfer files
between PCs
and Apple
Macintosh
machines
APPLE MAC
Pour Lancer le Système
• Cliquez sur l’icône <<sans titre>>.
• Collect email and
keep passwords and
account numbers
Pour Retirer le Store ‘n’ Go Professional
• Pour retirer le Store ‘n’ Go Professional, faites glisser l’icone
• Save mp3 and
picture files
du Store ‘n’ Go Professional vers la corbeille.
• Retirez le Store ‘n’ Go Professional.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM
REQUIREMENTS
Store’n’Go Professional
Host Interface
Universal Serial Bus
(USB 2.0 High Speed and Full Speed)
Hardware:
Store ‘n’ Go Professional plugs into any PC
or Apple Macintosh with a USB port.
Power Supply
USB bus powered
No external power required
(high power device)
Power consumption
Transfer Rate
Standby:
790uA (typical), 1.0mA (max)
Read/write:
Software:
High Speed: 105mA (typical), 125mA (max)
Full Speed: 75mA (typical), 105mA (max)
No special software is required for systems running on
Windows 2000, Windows Millennium Edition, Windows XP,
Linux 2.6.0, and Macintosh OS 9.x, 10.x. For systems running
Windows 98 driver files must be installed before using
Store ‘n’ Go Professional for the first time.
High Speed: Read upto 23MB/sec,
write upto 14MB/sec
Full Speed: Read upto 1MB/sec,
write upto 1MB/sec
A Windows 98 driver is available at our web site
Supported Operating
Systems
Windows 98SE, 2000, Me, XP
Macintosh 9.x, 10.x
Note that earlier versions of windows including Windows 95
do not support USB Mass Storage Class Devices and
consequently are not compatible with Store ‘n’ Go Professional.
Linux kernel version 2.6.x (tested with
RedHat, Suse and Turbo Linux)
LED Indicators
LED flashing slowly –
connected and inactive
LED flashing rapidly –
transmitting/receiving data
LED Colours –
PRECAUTIONS
• When the indicator light is blinking rapidly, Store ‘n’ Go
Professional is transferring data between itself and
the host computer. Do not remove Store ‘n’ Go
Blue USB High Speed Mode
– Red USB Full Speed Mode
Professional until the light slows to a slow, regular pulse.
• Deactivate Store ‘n’ Go Professional before removing it
from the USB port.
Operating Temperature
Storage Temperature
0° C to 60° C
-40°C to 70°C
• Keep your Store ‘n’ Go Professional away from water,
extreme moisture or heat.
Environment
Altitude
Relative humidity 5% to 90%
Operating 6,096m (20,000ft)
Storage 12,192m (40,000ft)
• Keep your Store ‘n’ Go Professional away from
electrostatic sources and magnetic fields.
• Store your Store ‘n’ Go Professional with its cap in place.
Vibration
5G RMS, 10 to 2,000Hz,
0.5 Oct/min sweep rate
• Do not force Store ‘n’ Go Professional into the USB port.
If the port resists smooth insertion of Store ‘n’ Go
Professional, check that the device is positioned
with the USB icon on top and that the port is
free of obstructions.
Shock
Non operating 55G, 11ms, half-sine
FCC, CD, VCCI, CE, TUV, WHQL
Certification
VERBATIM LIMITED LIFETIME WARRANTY
Verbatim Corporation warrants this product to be free from defects in material and workmanship If this product is found to be
defective, it will be replaced at no cost to you. You may return it with your original cash register receipt to the place of purchase
or contact Verbatim.
In the following European countries, Austria, Belgium, Denmark, Finland, France, Germany, Greece, Hungary, Italy, Luxembourg,
Monaco, Netherlands, Norway, Poland, Portugal, Republic of Ireland, Spain, Sweden, Switzerland, call 00 800 3883 2222.
All other European countries call +353 61 226586.
You can email drivesupport@verbatim-europe.com.
In the U.S. and Canada, call 800-538-8589 or email techsupport@verbatim.com.
Product replacement is your sole remedy under this warranty, and this warranty does not apply to normal wear or to damage
resulting from abnormal use, misuse, abuse, neglect or accident, or to any incompatibility or poor performance due to the specific
computer software or hardware used. VERBATIM WILL NOT BE LIABLE FOR DATA LOSS OR ANY INCIDENTAL, CONSEQUENTIAL
OR SPECIAL DAMAGES, HOWEVER CAUSED, FOR BREACH OF WARRANTIES OR OTHERWISE. This warranty gives you specific
legal rights and you may also have other rights which vary from state to state or country to country.
NOTE: Verbatim Corporation may at any time revise the content of this user guide without further notice.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Store 'n' Go PROFESSIONAL
Business Uses
INSTALLATION
• Entfernen Sie die Schutzkappe.
• Save documents
and presentations
• Stecken Sie den Store ‘n’ Go Professional in die USB Schnittstelle.
1 Ein kurzer Lichtimpuls bedeutet, dass Store ‘n’ Go Professional
für lhren Gebrauch bereit ist.
• Back up
important files
2 Schnelle Lichtimpulse bedeuten, dass Daten übertragen werden..
• Transfer files
between computers
Bitte entfernen Sie den Store ‘n’ Go Professional nicht,
solange die Kontrolleuchte aufblinkt.
• Take your important
files with you
wherever you go
WINDOWS
Arbeitsbeginn
• Drücken Sie auf ‘Mein Arbeitsplatz’ und danach auf
‘Externe Festplatte’.
Personal Uses
Entfernen von Store ‘n’ Go Professional
• Um den Store ‘n’ Go Professional zu entfernen, drüken Sie
zweimal auf das Symbol ‘USB Massenspeicher entfernen’
auf der rechten Seite der Taskleiste.
• Download books
and music from
the internet
• Entfernen Sie den Store ‘n’ Go Professional.
• Transfer files
between PCs
and Apple
Macintosh
machines
APPLE MAC
Arbeitsbeginn
• Drücken Sie auf das Symbol ‘unbenanntes Laufwerk’.
• Collect email and
keep passwords and
account numbers
Entfernen von Store ‘n’ Go Professional
• Um den Store ‘n’ Go Professional zu entfernen, ziehen
Sie das Store ‘n’ Go Professional Symbol einfach in
den Abfalleimer.
• Save mp3 and
picture files
• Entfernen Sie den Store ‘n’ Go Professional.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM
REQUIREMENTS
Store’n’Go Professional
Host Interface
Universal Serial Bus
(USB 2.0 High Speed and Full Speed)
Hardware:
Store ‘n’ Go Professional plugs into any PC
or Apple Macintosh with a USB port.
Power Supply
USB bus powered
No external power required
(high power device)
Power consumption
Transfer Rate
Standby:
790uA (typical), 1.0mA (max)
Read/write:
Software:
High Speed: 105mA (typical), 125mA (max)
Full Speed: 75mA (typical), 105mA (max)
No special software is required for systems running on
Windows 2000, Windows Millennium Edition, Windows XP,
Linux 2.6.0, and Macintosh OS 9.x, 10.x. For systems running
Windows 98 driver files must be installed before using
Store ‘n’ Go Professional for the first time.
High Speed: Read upto 23MB/sec,
write upto 14MB/sec
Full Speed: Read upto 1MB/sec,
write upto 1MB/sec
A Windows 98 driver is available at our web site
Supported Operating
Systems
Windows 98SE, 2000, Me, XP
Macintosh 9.x, 10.x
Note that earlier versions of windows including Windows 95
do not support USB Mass Storage Class Devices and
consequently are not compatible with Store ‘n’ Go Professional.
Linux kernel version 2.6.x (tested with
RedHat, Suse and Turbo Linux)
LED Indicators
LED flashing slowly –
connected and inactive
LED flashing rapidly –
transmitting/receiving data
LED Colours –
PRECAUTIONS
• When the indicator light is blinking rapidly, Store ‘n’ Go
Professional is transferring data between itself and
the host computer. Do not remove Store ‘n’ Go
Blue USB High Speed Mode
– Red USB Full Speed Mode
Professional until the light slows to a slow, regular pulse.
• Deactivate Store ‘n’ Go Professional before removing it
from the USB port.
Operating Temperature
Storage Temperature
0° C to 60° C
-40°C to 70°C
• Keep your Store ‘n’ Go Professional away from water,
extreme moisture or heat.
Environment
Altitude
Relative humidity 5% to 90%
Operating 6,096m (20,000ft)
Storage 12,192m (40,000ft)
• Keep your Store ‘n’ Go Professional away from
electrostatic sources and magnetic fields.
• Store your Store ‘n’ Go Professional with its cap in place.
Vibration
5G RMS, 10 to 2,000Hz,
0.5 Oct/min sweep rate
• Do not force Store ‘n’ Go Professional into the USB port.
If the port resists smooth insertion of Store ‘n’ Go
Professional, check that the device is positioned
with the USB icon on top and that the port is
free of obstructions.
Shock
Non operating 55G, 11ms, half-sine
FCC, CD, VCCI, CE, TUV, WHQL
Certification
VERBATIM LIMITED LIFETIME WARRANTY
Verbatim Corporation warrants this product to be free from defects in material and workmanship If this product is found to be
defective, it will be replaced at no cost to you. You may return it with your original cash register receipt to the place of purchase
or contact Verbatim.
In the following European countries, Austria, Belgium, Denmark, Finland, France, Germany, Greece, Hungary, Italy, Luxembourg,
Monaco, Netherlands, Norway, Poland, Portugal, Republic of Ireland, Spain, Sweden, Switzerland, call 00 800 3883 2222.
All other European countries call +353 61 226586.
You can email drivesupport@verbatim-europe.com.
In the U.S. and Canada, call 800-538-8589 or email techsupport@verbatim.com.
Product replacement is your sole remedy under this warranty, and this warranty does not apply to normal wear or to damage
resulting from abnormal use, misuse, abuse, neglect or accident, or to any incompatibility or poor performance due to the specific
computer software or hardware used. VERBATIM WILL NOT BE LIABLE FOR DATA LOSS OR ANY INCIDENTAL, CONSEQUENTIAL
OR SPECIAL DAMAGES, HOWEVER CAUSED, FOR BREACH OF WARRANTIES OR OTHERWISE. This warranty gives you specific
legal rights and you may also have other rights which vary from state to state or country to country.
NOTE: Verbatim Corporation may at any time revise the content of this user guide without further notice.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Store 'n' Go PROFESSIONAL
Business Uses
INSTALLAZIONE
• Rimuovete il coperchio.
• Save documents
and presentations
• Inserite Store ‘n’ Go Professional nella porta USB.
1 Il lampeggiamento lento del led indica che Store ‘n’ Go
Professional è stato inserito correttamenteed è pronto
per il funzionamento.
• Back up
important files
2 Il lampeggiamento veloce del led indica che è in corso
il trasferimento dei dati.
Non rimuovete Store ‘n’ Go Professional quando
il led lampeggia.
• Transfer files
between computers
• Take your important
files with you
wherever you go
WINDOWS
Per Iniziare
• Cliccate su ‘Risorse del computer’ e selezionate ‘Disco rimovibile’.
Personal Uses
Come Rimuovere Store ‘n’ Go Professional
• Per rimuovere Store ‘n’ Go Professional, cliccate due volte
sull’icona ‘Disattiva periferiche d’archiviazione di massa’
posto sul lato destro della barra delle applicazioni.
• Download books
and music from
the internet
• Rimuovete Store ‘n’ Go Professional.
• Transfer files
between PCs
and Apple
Macintosh
machines
APPLE MAC
Per Iniziare
• Cliccate sull’icona dell’unità disco ‘Senza titolo’.
• Collect email and
keep passwords and
account numbers
Come Rimuovere Store ‘n’ Go Professional
• Per rimuovere Store ‘n’ Go Professional, trascinate l’icona
Store ‘n’ Go Professional sul cestino.
• Save mp3 and
picture files
• Rimuovete Store ‘n’ Go Professional.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM
REQUIREMENTS
Store’n’Go Professional
Host Interface
Universal Serial Bus
(USB 2.0 High Speed and Full Speed)
Hardware:
Store ‘n’ Go Professional plugs into any PC
or Apple Macintosh with a USB port.
Power Supply
USB bus powered
No external power required
(high power device)
Power consumption
Transfer Rate
Standby:
790uA (typical), 1.0mA (max)
Read/write:
Software:
High Speed: 105mA (typical), 125mA (max)
Full Speed: 75mA (typical), 105mA (max)
No special software is required for systems running on
Windows 2000, Windows Millennium Edition, Windows XP,
Linux 2.6.0, and Macintosh OS 9.x, 10.x. For systems running
Windows 98 driver files must be installed before using
Store ‘n’ Go Professional for the first time.
High Speed: Read upto 23MB/sec,
write upto 14MB/sec
Full Speed: Read upto 1MB/sec,
write upto 1MB/sec
A Windows 98 driver is available at our web site
Supported Operating
Systems
Windows 98SE, 2000, Me, XP
Macintosh 9.x, 10.x
Note that earlier versions of windows including Windows 95
do not support USB Mass Storage Class Devices and
consequently are not compatible with Store ‘n’ Go Professional.
Linux kernel version 2.6.x (tested with
RedHat, Suse and Turbo Linux)
LED Indicators
LED flashing slowly –
connected and inactive
LED flashing rapidly –
transmitting/receiving data
LED Colours –
PRECAUTIONS
• When the indicator light is blinking rapidly, Store ‘n’ Go
Professional is transferring data between itself and
the host computer. Do not remove Store ‘n’ Go
Blue USB High Speed Mode
– Red USB Full Speed Mode
Professional until the light slows to a slow, regular pulse.
• Deactivate Store ‘n’ Go Professional before removing it
from the USB port.
Operating Temperature
Storage Temperature
0° C to 60° C
-40°C to 70°C
• Keep your Store ‘n’ Go Professional away from water,
extreme moisture or heat.
Environment
Altitude
Relative humidity 5% to 90%
Operating 6,096m (20,000ft)
Storage 12,192m (40,000ft)
• Keep your Store ‘n’ Go Professional away from
electrostatic sources and magnetic fields.
• Store your Store ‘n’ Go Professional with its cap in place.
Vibration
5G RMS, 10 to 2,000Hz,
0.5 Oct/min sweep rate
• Do not force Store ‘n’ Go Professional into the USB port.
If the port resists smooth insertion of Store ‘n’ Go
Professional, check that the device is positioned
with the USB icon on top and that the port is
free of obstructions.
Shock
Non operating 55G, 11ms, half-sine
FCC, CD, VCCI, CE, TUV, WHQL
Certification
VERBATIM LIMITED LIFETIME WARRANTY
Verbatim Corporation warrants this product to be free from defects in material and workmanship If this product is found to be
defective, it will be replaced at no cost to you. You may return it with your original cash register receipt to the place of purchase
or contact Verbatim.
In the following European countries, Austria, Belgium, Denmark, Finland, France, Germany, Greece, Hungary, Italy, Luxembourg,
Monaco, Netherlands, Norway, Poland, Portugal, Republic of Ireland, Spain, Sweden, Switzerland, call 00 800 3883 2222.
All other European countries call +353 61 226586.
You can email drivesupport@verbatim-europe.com.
In the U.S. and Canada, call 800-538-8589 or email techsupport@verbatim.com.
Product replacement is your sole remedy under this warranty, and this warranty does not apply to normal wear or to damage
resulting from abnormal use, misuse, abuse, neglect or accident, or to any incompatibility or poor performance due to the specific
computer software or hardware used. VERBATIM WILL NOT BE LIABLE FOR DATA LOSS OR ANY INCIDENTAL, CONSEQUENTIAL
OR SPECIAL DAMAGES, HOWEVER CAUSED, FOR BREACH OF WARRANTIES OR OTHERWISE. This warranty gives you specific
legal rights and you may also have other rights which vary from state to state or country to country.
NOTE: Verbatim Corporation may at any time revise the content of this user guide without further notice.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Store 'n' Go PROFESSIONAL
Business Uses
INSTALACIÓN
• Retire el capuchón.
• Save documents
and presentations
• Inserte Sore ‘n’ Go Professional en el puerto USB.
1 Un destello luminoso lento significa que Store´n´ Go
Professional está listo para ser utilizado.
• Back up
important files
2 Un destello luminoso rápido significa que se están
transfiriendo los datos.
• Transfer files
between computers
No retire Store´n´ Go Professional cuando la luz parpadee.
• Take your important
files with you
wherever you go
WINDOWS
Para Empezar a Trabajar
• Pulse en ‘Mi PC’ y en ‘Disco extraíble’
Para Retirar Store ‘n’ Go Professional
Personal Uses
• Para retirar Store´n´Go Professional, pulse dos veces en el
icono ‘Detener el dispositivo de almacenamiento de USB’ en
la parte derecha de la barra de tareas. (Aplicable según la
versión del sistema operativo).• Remove Store ‘n’ Go Professional.
• Download books
and music from
the internet
• Retire Store ‘n’ Go Professional.
• Transfer files
between PCs
and Apple
Macintosh
machines
APPLE MAC
Para Empezar a Trabajar
• Pulse en el icono del controlador ‘sin título’.
• Collect email and
keep passwords and
account numbers
Para Retirar Store ‘n’ Go Professional
• Para retirar Store ‘n’ Go Professional arrastre el icono
• Save mp3 and
picture files
Store ‘n’ Go Professional al cesto.
• Retire Store ‘n’ Go Professional.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM
REQUIREMENTS
Store’n’Go Professional
Host Interface
Universal Serial Bus
(USB 2.0 High Speed and Full Speed)
Hardware:
Store ‘n’ Go Professional plugs into any PC
or Apple Macintosh with a USB port.
Power Supply
USB bus powered
No external power required
(high power device)
Power consumption
Transfer Rate
Standby:
790uA (typical), 1.0mA (max)
Read/write:
Software:
High Speed: 105mA (typical), 125mA (max)
Full Speed: 75mA (typical), 105mA (max)
No special software is required for systems running on
Windows 2000, Windows Millennium Edition, Windows XP,
Linux 2.6.0, and Macintosh OS 9.x, 10.x. For systems running
Windows 98 driver files must be installed before using
Store ‘n’ Go Professional for the first time.
High Speed: Read upto 23MB/sec,
write upto 14MB/sec
Full Speed: Read upto 1MB/sec,
write upto 1MB/sec
A Windows 98 driver is available at our web site
Supported Operating
Systems
Windows 98SE, 2000, Me, XP
Macintosh 9.x, 10.x
Note that earlier versions of windows including Windows 95
do not support USB Mass Storage Class Devices and
consequently are not compatible with Store ‘n’ Go Professional.
Linux kernel version 2.6.x (tested with
RedHat, Suse and Turbo Linux)
LED Indicators
LED flashing slowly –
connected and inactive
LED flashing rapidly –
transmitting/receiving data
LED Colours –
PRECAUTIONS
• When the indicator light is blinking rapidly, Store ‘n’ Go
Professional is transferring data between itself and
the host computer. Do not remove Store ‘n’ Go
Blue USB High Speed Mode
– Red USB Full Speed Mode
Professional until the light slows to a slow, regular pulse.
• Deactivate Store ‘n’ Go Professional before removing it
from the USB port.
Operating Temperature
Storage Temperature
0° C to 60° C
-40°C to 70°C
• Keep your Store ‘n’ Go Professional away from water,
extreme moisture or heat.
Environment
Altitude
Relative humidity 5% to 90%
Operating 6,096m (20,000ft)
Storage 12,192m (40,000ft)
• Keep your Store ‘n’ Go Professional away from
electrostatic sources and magnetic fields.
• Store your Store ‘n’ Go Professional with its cap in place.
Vibration
5G RMS, 10 to 2,000Hz,
0.5 Oct/min sweep rate
• Do not force Store ‘n’ Go Professional into the USB port.
If the port resists smooth insertion of Store ‘n’ Go
Professional, check that the device is positioned
with the USB icon on top and that the port is
free of obstructions.
Shock
Non operating 55G, 11ms, half-sine
FCC, CD, VCCI, CE, TUV, WHQL
Certification
VERBATIM LIMITED LIFETIME WARRANTY
Verbatim Corporation warrants this product to be free from defects in material and workmanship If this product is found to be
defective, it will be replaced at no cost to you. You may return it with your original cash register receipt to the place of purchase
or contact Verbatim.
In the following European countries, Austria, Belgium, Denmark, Finland, France, Germany, Greece, Hungary, Italy, Luxembourg,
Monaco, Netherlands, Norway, Poland, Portugal, Republic of Ireland, Spain, Sweden, Switzerland, call 00 800 3883 2222.
All other European countries call +353 61 226586.
You can email drivesupport@verbatim-europe.com.
In the U.S. and Canada, call 800-538-8589 or email techsupport@verbatim.com.
Product replacement is your sole remedy under this warranty, and this warranty does not apply to normal wear or to damage
resulting from abnormal use, misuse, abuse, neglect or accident, or to any incompatibility or poor performance due to the specific
computer software or hardware used. VERBATIM WILL NOT BE LIABLE FOR DATA LOSS OR ANY INCIDENTAL, CONSEQUENTIAL
OR SPECIAL DAMAGES, HOWEVER CAUSED, FOR BREACH OF WARRANTIES OR OTHERWISE. This warranty gives you specific
legal rights and you may also have other rights which vary from state to state or country to country.
NOTE: Verbatim Corporation may at any time revise the content of this user guide without further notice.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
|