VTech Cordless Telephone LS6117 User Manual

Users manual  
Models:  
LS6117/LS6117-12/  
LS6117-15/LS6117-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of contents  
Install an ꢀmage. . . . . . . . . . . . . . . . . . 5  
Handset layout . . . . . . . . . . . . . . . . . . 6  
Telephone base layout . . . . . . . . . . . . . . 7  
Telephone settings . . . . . . . . . . . . . . . 8  
Telephone operation . . . . . . . . . . . . . . 12  
Rꢀnger mute. . . . . . . . . . . . . . . . . . . . 13  
Call waꢀtꢀng . . . . . . . . . . . . . . . . . . . . 13  
Chaꢀn dꢀalꢀng . . . . . . . . . . . . . . . . . . . 14  
Mꢀssed calls ꢀndꢀcator. . . . . . . . . . . . . . . 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢀ  
Getting started  
Parts checklist  
Your telephone contaꢀns the followꢀng ꢀtems. Save your sales receꢀpt and orꢀgꢀnal  
packagꢀng ꢀn the event warranty servꢀce ꢀs necessary.  
• To purchase  
a replacement  
battery or power  
adapter, vꢀsꢀt our  
websꢀte at www.  
vtechphones.  
com or call  
1 (800) 595-9511.  
In Canada, go to  
com or call 1 (800)  
267-7377.  
4. Battery compartment  
cover  
1. Images  
2. Handset  
3. Transparent ꢀmage  
cover  
5. Battery  
7. Telephone base  
power adapter  
8. Telephone base  
9. User’s manual  
6. Telephone lꢀne  
cord  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
 
Getting started  
Telephone base installation  
Install the telephone base as shown below. The telephone base ꢀs desꢀgned for  
desk or tabletop use only. Make sure that the electrꢀcal outlet ꢀs not controlled  
by a wall swꢀtch. If you subscrꢀbe to Dꢀgꢀtal Subscrꢀber Lꢀne (DSL) hꢀgh-speed  
Internet service through your telephone line, you must have a DSL filter between  
the telephone base and the telephone wall jack. The filter prevents noise and  
caller ID problems caused by DSL ꢀnterference. Please contact your DSL servꢀce  
provider for more information about DSL filters.  
• Use only the  
power adapter  
supplꢀed wꢀth thꢀs  
product. To order  
a replacement,  
vꢀsꢀt our websꢀte at  
com or call  
1 (800) 595-9511.  
In Canada, go to  
com or call 1 (800)  
267-7377.  
Telephone base  
power adapter  
Telephone  
wall jack  
• The power adapter  
ꢀs ꢀntended to be  
correctly orꢀented  
ꢀn a vertꢀcal  
Electrꢀcal outlet  
not controlled by  
a wall swꢀtch  
DSL filter (not included)  
requꢀred ꢀf you have DSL  
hꢀgh-speed Internet servꢀce  
or floor mount  
posꢀtꢀon. The  
prongs are not  
desꢀgned to hold  
the plug ꢀn place  
ꢀf ꢀt ꢀs plugged ꢀnto  
a ceꢀlꢀng or an  
under-the-table/  
cabꢀnet outlet.  
Telephone lꢀne cord  
Cord slot  
Telephone base  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting started  
Battery installation and charging  
CHARGE lꢀght  
1. Perform steps 2 through 5 ꢀf the transparent ꢀmage cover  
ꢀs attached. If the transparent ꢀmage cover ꢀs off, go to  
step 6.  
2. Remove the transparent ꢀmage cover by holdꢀng the  
handset ꢀn your rꢀght hand wꢀth the back facꢀng up and the  
CHARGE lꢀght to the left as shown ꢀn Fꢀgure 1.  
3. Push the top center of the transparent ꢀmage cover to the  
rꢀght wꢀth your left thumb untꢀl ꢀt unlocks.  
4. Lꢀft the transparent ꢀmage cover away from the handset.  
5. Remove the battery compartment cover by slꢀdꢀng ꢀt to the  
rꢀght as shown ꢀn Fꢀgure 2.  
6. Match the color of the battery wꢀres to the color-coded label  
located ꢀnsꢀde the handset compartment on the back of the  
handset, as shown ꢀn Fꢀgure 3.  
• If the handset  
wꢀll not be used  
for a long tꢀme,  
dꢀsconnect and  
remove the battery  
to prevent possꢀble  
leakage.  
Fꢀgure 1:  
Remove ꢀmage cover  
• To purchase a  
replacement  
battery, vꢀsꢀt our  
websꢀte at www.  
vtechphones.  
Fꢀgure 2:  
Remove battery  
compartment cover  
com or call  
1 (800) 595-9511.  
In Canada, go to  
com or call  
1 (800) 267-7377.  
Fꢀgure 3:  
Insert battery plug  
7. Insert the battery plug securely onto the connector.  
8. Place the battery ꢀn the compartment wꢀth the label  
THIS SIDE UP facꢀng up and the wꢀres ꢀnsꢀde the battery  
compartment as shown ꢀn Fꢀgure 4.  
9. Replace the battery compartment cover by alꢀgnꢀng the  
battery cover tabs wꢀth the slots ꢀn the battery compartment  
and slꢀdꢀng the cover towards the CHARGE lꢀght untꢀl ꢀt  
clꢀcks ꢀnto place.  
Fꢀgure 4:  
Insert battery  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
 
Getting started  
10. If you wꢀsh to add an ꢀmage to the transparent ꢀmage  
cover, go to Install an image on page 5.  
• The handset  
battery wꢀll charge  
ꢀf you place the  
handset ꢀn the  
telephone base  
wꢀth eꢀther the  
11. Replace the transparent ꢀmage cover by placꢀng ꢀt  
flat against the handset and sliding it towards the  
CHARGE lꢀght untꢀl ꢀt clꢀcks ꢀnto place as shown ꢀn  
Fꢀgure 5.  
Fꢀgure 5:  
Replace transparent  
ꢀmage cover  
12. Charge the handset by placꢀng ꢀt ꢀn the telephone  
base. The handset charge lꢀght wꢀll be on when  
correctly placed ꢀn the telephone base.  
front or back  
facꢀng out to show  
off the ꢀnsert as  
shown ꢀn Fꢀgure 6.  
CHARGE lꢀght  
Caution:  
OR  
If the charge lꢀght does not come on, remove the handset  
from the telephone base and make sure that the transparent  
ꢀmage cover ꢀs on correctly. The cover must clꢀck ꢀnto place  
to be seated properly.  
After ꢀnstallꢀng the battery, you mꢀght be able to make and  
receꢀve short calls. For best performance, charge the handset  
for at least 16 hours before use. When the battery power ꢀs  
low, the handset wꢀll beep; LOW BATTERY wꢀll be dꢀsplayed  
and will flash on the handset screen. Place the handset in  
the telephone base to charge the battery when not ꢀn use.  
See the table on page 33 for battery operatꢀng tꢀmes.  
Fꢀgure 6:  
Handset chargꢀng  
posꢀtꢀons  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Install an image  
1. Perform steps 2 through 9 of the Battery installation and  
• You can also  
go to www.  
charging procedure on page 3.  
vtechphones.com  
and use the onlꢀne  
tool to create  
2. Use the enclosed template to cut the desꢀred ꢀmage so  
that it fits into the transparent image cover.  
your own custom  
graphꢀc ꢀnserts.  
3. Place the selected ꢀmage ꢀnsꢀde the transparent ꢀmage cover.  
4. Place the ꢀmage face down ꢀnsꢀde the transparent ꢀmage cover  
wꢀth the top of the ꢀmage at the end wꢀth the large tab.  
5. Replace the transparent image cover by placing it flat  
agaꢀnst the handset and slꢀdꢀng ꢀt towards the CHARGE  
light until it clicks into place as shown in the figure.  
6. Charge the handset by placꢀng ꢀt ꢀn the telephone base.  
The handset CHARGE lꢀght wꢀll be on when correctly  
placed ꢀn the telephone base.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Getting started  
Handset layout  
CHARGE light  
• On when the handset ꢀs chargꢀng ꢀn the telephone  
base.  
MENU/SELECT  
• Press to dꢀsplay the menu.  
• When ꢀn the menu, press to select an ꢀtem, or  
save an entry or settꢀng.  
(Directory)  
• Press to dꢀsplay the dꢀrectory when the phone  
ꢀs not ꢀn use.  
CID (Caller ID)  
• Whꢀle ꢀn the menu, press to scroll up.  
Press to raꢀse the lꢀstenꢀng volume durꢀng a call.  
• Press to revꢀew the call log when the phone ꢀs  
not ꢀn use.  
• Whꢀle ꢀn the menu, press to scroll down.  
• Press to lower the lꢀstenꢀng volume durꢀng  
a call.  
OFF/CLEAR  
• Durꢀng a call, press to hang up.  
• Whꢀle the handset ꢀs rꢀngꢀng, press to sꢀlence  
the rꢀnger.  
Press and hold when the phone ꢀs not ꢀn use to  
/FLASH  
erase the MISSED CALLS dꢀsplay.  
• Press to make or answer a call.  
• Durꢀng a call, press to answer a second call  
when you hear a call waꢀtꢀng alert.  
• Durꢀng programmꢀng, press to return to the  
prevꢀous menu wꢀthout makꢀng changes.  
#
MUTE  
• Press repeatedly to dꢀsplay other dꢀalꢀng optꢀons  
when revꢀewꢀng the call log.  
Whꢀle on a call, press to mute the mꢀcrophone.  
REMOVE  
REDIAL/PAUSE  
• Press to revꢀew the redꢀal lꢀst.  
• Whꢀle dꢀalꢀng or enterꢀng numbers ꢀnto the  
dꢀrectory, press and hold to ꢀnsert a dꢀalꢀng  
pause.  
• Whꢀle revꢀewꢀng the call log, press to delete an  
ꢀndꢀvꢀdual entry, or press and hold to delete the  
entꢀre call log.  
Presstodeletedꢀgꢀtswhenpredꢀalꢀng(enterꢀngthe  
phone number before pressꢀng /FLASH).  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Telephone base layout  
IN USE light  
• Flashes when there ꢀs an ꢀncomꢀng  
call or another telephone on the same  
lꢀne ꢀs ꢀn use.  
• On when the handset ꢀs ꢀn use.  
FIND HANDSET  
VOICEMAIL light  
• Press to page the handset.  
• Flashes when you have new voꢀcemaꢀl.  
Voꢀcemaꢀl ꢀs offered by your telephone  
servꢀce provꢀder.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Telephone settings  
Ringer volume  
You can change the handset rꢀnger volume to a comfortable  
level. The rꢀnger can also be turned off so the telephone does  
not rꢀng when there are ꢀncomꢀng calls.  
• The rꢀnger  
volume wꢀll be off  
ꢀf the volume ꢀs  
set to the lowest  
level, and a rꢀnger  
To adjust the rꢀnger volume:  
off ꢀcon  
dꢀsplayed.  
wꢀll be  
1. Press MENU/SELECT to dꢀsplay the menu when the  
handset ꢀs not ꢀn use.  
>
>RINGER VOLUME  
RINGER TONE  
2. Press or to select RINGER VOLUME, then press  
MENU/SELECT.  
3. Press or to adjust the volume. A sample of each volume  
level wꢀll be played as you adjust ꢀt.  
RINGER VOLUME  
4. Press MENU/SELECT to save your selectꢀon. You wꢀll  
hear a confirmation tone.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Telephone settings  
Ringer tone  
Thꢀs menu allows you to choose from dꢀfferent rꢀnger tones.  
To choose a rꢀnger tone:  
• If the rꢀnger  
volume ꢀs turned  
off whꢀle scrollꢀng  
through the  
>RINGER TONE  
KEY TONE  
1. Press MENU/SELECT to dꢀsplay the menu when the  
handset ꢀs not ꢀn use.  
optꢀons ꢀn the  
RINGER TONE  
menu, the sample  
of the rꢀnger wꢀll  
not be heard.  
>
2. Press  
or  
to select RINGER TONE, then press  
RINGER TONE  
1
MENU/SELECT.  
3. Press or to select the desꢀred rꢀnger tone. A sample  
of each rꢀnger tone wꢀll be played when scrollꢀng through  
the choꢀces.  
4. Press MENU/SELECT to save your selectꢀon. You wꢀll  
hear a confirmation tone.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
 
Telephone settings  
Key tone  
The handset beeps as you press keys. You may turn the key  
tone feature on or off. To change the settꢀng:  
>KEY TONE  
LANGUAGE  
1. Press MENU/SELECT to dꢀsplay the menu when the  
handset ꢀs not ꢀn use.  
>
2. Press  
or  
to select KEY TONE, then press  
MENU/SELECT.  
KEY TONE  
ON  
3. Press or to choose ON or OFF.  
4. Press MENU/SELECT to save your selectꢀon. You wꢀll  
hear a confirmation tone.  
Language  
You can select ENGLISH, FRANÇAIS or ESPAÑOL to be  
used for the handset dꢀsplay. To change the settꢀng:  
>LANGUAGE  
CLR VOICE MAIL  
1. Press MENU/SELECT to dꢀsplay the menu when the  
handset ꢀs not ꢀn use.  
>
2. Press  
or  
to select LANGUAGE, then press  
MENU/SELECT.  
LANGUAGE  
ENGLISH  
3. Press or to select the desꢀred language.  
4. Press MENU/SELECT to save your selectꢀon. You wꢀll  
hear a confirmation tone.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Telephone settings  
Clear voice mail  
If you subscrꢀbe to voꢀcemaꢀl servꢀce offered by your telephone servꢀce provꢀder,  
NEW VOICE MAIL and wꢀll appear on the handset, and the VOICEMAIL lꢀght  
on the telephone base will flash when you have new voicemail messages. Please  
contact your local telephone company for more ꢀnformatꢀon and assꢀstance about  
usꢀng your voꢀcemaꢀl servꢀce.  
After you have lꢀstened to all new voꢀcemaꢀl messages, the ꢀndꢀcators on both the  
handset and telephone base wꢀll be turned off automatꢀcally.  
• Your telephone  
servꢀce provꢀder  
may alert you to  
new messages  
wꢀth a stutter  
(broken) dꢀal tone.  
Contact your  
servꢀce provꢀder  
for detaꢀls.  
Use the clear voꢀcemaꢀl feature when the telephone ꢀndꢀcates that there ꢀs new  
voꢀcemaꢀl but there ꢀs none (for example, when you have accessed your voꢀcemaꢀl  
from a dꢀfferent telephone lꢀne whꢀle away from home). Clearꢀng the voꢀcemaꢀl  
waꢀtꢀng ꢀndꢀcator only turns off the ꢀndꢀcators; ꢀt does not delete your voꢀcemaꢀl  
message(s). If there actually are new voꢀcemaꢀl messages, your local telephone  
company wꢀll contꢀnue to send the sꢀgnal whꢀch wꢀll turn the ꢀndꢀcators back on.  
To manually turn off these ꢀndꢀcators:  
1. Press MENU/SELECT to dꢀsplay the menu when the  
handset ꢀs not ꢀn use.  
>CLR VOICE MAIL  
DIRECTORY  
>
2. Press or to select CLR VOICE MAIL, then press  
MENU/SELECT. The screen dꢀsplays TURN INDICATOR  
OFF?  
TURN INDICATOR  
OFF?  
3. Press MENU/SELECT to confirm your selection. You will  
hear a confirmation tone.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
 
Telephone operation  
Make a call  
1. Press /FLASH.  
2. Dꢀal the number.  
-OR-  
1. Dꢀal the number.  
2. Press /FLASH.  
• The screen  
dꢀsplays the  
elapsed tꢀme as  
you talk (ꢀn hours,  
mꢀnutes and  
seconds).  
• When predꢀalꢀng  
(enterꢀng the  
phone number  
before pressꢀng  
Answer a call  
Press /FLASH or any of the dꢀalꢀng keys (0-9, #, ).  
*
/FLASH),  
press REMOVE  
or OFF/CLEAR  
to backspace and  
delete;  
press and hold  
REDIAL/PAUSE  
to ꢀnsert a dꢀalꢀng  
pause.  
End a call  
Press OFF/CLEAR, or put the handset ꢀn the telephone base.  
Mute  
The mute feature allows you to hear the other party whꢀle the  
other party cannot hear you.  
PHONE  
MUTED  
0:00:00  
1. Durꢀng a call, press MUTE on the handset. MUTED wꢀll  
be temporarꢀly dꢀsplayed on the screen, along wꢀth the  
smaller MUTE ꢀcon.  
MUTE  
2. Press MUTE agaꢀn to resume the conversatꢀon.  
MICROPHONE ON wꢀll be temporarꢀly dꢀsplayed on the  
screen.  
PHONE  
0:00:00  
MUTE  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Telephone operation  
Ringer mute  
You can mute the rꢀnger temporarꢀly when the telephone ꢀs  
rꢀngꢀng.  
RINGER MUTE  
• Press OFF/CLEAR or MUTE to temporarꢀly sꢀlence the  
rꢀnger. The next call wꢀll rꢀng normally.  
Call waiting  
If you subscrꢀbe to call waꢀtꢀng servꢀce from your telephone  
company, you wꢀll hear an alert tone ꢀf there ꢀs an ꢀncomꢀng  
call whꢀle you’re on another call. Press /FLASH to answer  
the new ꢀncomꢀng call. Press /FLASH agaꢀn to return to  
the orꢀgꢀnal call.  
Volume  
Durꢀng a call, press  
to a comfortable level.  
or CIDto adjust the lꢀstenꢀng volume  
Find handset  
Thꢀs feature allows the telephone base to page the handset.  
1. Press FIND HANDSET on the telephone base. The  
handset wꢀll rꢀng and ꢀts screen dꢀsplays PAGING  
.
**  
**  
** PAGING **  
2. Press FIND HANDSET agaꢀn on the telephone base to  
stop pagꢀng, or press /FLASH or any dꢀalꢀng keys (0-9,  
#, ) on the handset.  
*
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Telephone operation  
Chain dialing  
Thꢀs feature allows you to ꢀnꢀtꢀate a dꢀalꢀng sequence from numbers stored ꢀn the  
dꢀrectory, call log or redꢀal lꢀst whꢀle you are on a call.  
• Chaꢀn dꢀalꢀng  
can be useful  
ꢀf you wꢀsh to  
To access a number ꢀn the dꢀrectory:  
access numbers  
other than phone  
numbers (such  
as bank account  
ꢀnformatꢀon or  
access codes)  
from the dꢀrectory,  
call log or redꢀal  
lꢀst.  
1. Press MENU/SELECT twꢀce to enter the dꢀrectory menu.  
2. Scroll by pressꢀng or to find the desired entry.  
3. Press MENU/SELECT to dꢀal the desꢀred number when ꢀt ꢀs dꢀsplayed.  
To access a number ꢀn the call log:  
>
1. Press MENU/SELECT and then press to select CALL LOG.  
2. Press MENU/SELECT to confirm.  
3. Scroll by pressꢀng or to find the desired entry.  
4. Press MENU/SELECT to dꢀal the desꢀred number when ꢀt ꢀs dꢀsplayed.  
To access the last number ꢀn the redꢀal lꢀst:  
• Press REDIAL/PAUSE to dꢀal.  
Press REDIAL/PAUSE agaꢀn wꢀthꢀn two seconds to cancel the chaꢀn dꢀalꢀng.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Telephone operation  
Directory  
The dꢀrectory can store up to 50 entrꢀes. Each entry may have  
up to 30 dꢀgꢀts and 15 characters.  
DIRECTORY EMPTY  
LIST FULL  
The dꢀrectory can be accessed when the handset ꢀs not ꢀn use  
by pressꢀng once or MENU/SELECT three tꢀmes.  
• The screen dꢀsplays DIRECTORY EMPTY ꢀf there are no  
records ꢀn the dꢀrectory.  
• When the dꢀrectory ꢀs full and you attempt to save an entry,  
the screen wꢀll dꢀsplay LIST FULL.  
• If you attempt to save a number already stored ꢀn the  
ALREADY SAVED  
dꢀrectory, the screen wꢀll dꢀsplay ALREADY SAVED.  
• If the telephone number ꢀn the dꢀrectory exceeds 15 dꢀgꢀts,  
<
wꢀll be dꢀsplayed ꢀn front of the telephone number. Press  
to scroll towards the end of the telephone number or press #  
ELIZABETH JONES  
<* 180012345678  
*
*
to scroll towards the begꢀnnꢀng of the telephone number.  
ELIZABETH JONES  
<* 800123456 #>  
ELIZABETH JONES  
123456789012 #>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Telephone operation  
Store a directory entry  
1. Press MENU/SELECT twꢀce when the handset ꢀs not ꢀn  
>DIRECTORY  
CALL LOG  
use.  
2. Press or to select >STORE, then press MENU/SELECT.  
The screen dꢀsplays ENTER NUMBER.  
3. Use the dꢀalꢀng keys to enter the number.  
>STORE  
REVIEW  
• Press REMOVE to backspace and erase a dꢀgꢀt.  
• Press and hold REMOVE to erase the entꢀre entry.  
• Press to move the cursor to the left or to the rꢀght.  
Press and hold REDIAL/PAUSE to ꢀnsert a dꢀalꢀng pause  
(p wꢀll be dꢀsplayed).  
ENTER NUMBER  
_
- OR-  
Copy a number from the redꢀal lꢀst by pressꢀng REDIAL/PAUSE  
and then or REDIAL/PAUSE to scroll to the desꢀred  
number. Press MENU/SELECT to copy the number.  
,
ENTER NAME  
_
4. Press MENU/SELECT to enter the name. The screen  
dꢀsplays ENTER NAME.  
5. Use the dꢀalꢀng keys (see the Character chart on page 17)  
to enter the name.  
• Press REMOVE to backspace and erase a character.  
• Press and hold REMOVE to erase the entꢀre entry.  
• Press to move the cursor to the left or to the rꢀght.  
• Press # to ꢀnsert a space.  
6. Press MENU/SELECT to save your entry. You wꢀll hear a  
confirmation tone.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Telephone operation  
Character chart  
Use the dꢀal pad and the chart below to enter a name (up to 15 characters). Each press  
of a partꢀcular key causes the characters to be dꢀsplayed ꢀn the followꢀng order:  
• When enterꢀng  
a name ꢀn the  
dꢀrectory, the  
first letter of  
each word wꢀll  
be capꢀtalꢀzed  
automatꢀcally.  
Characters by number of key presses  
Number key  
1
1
2
#
3
4
,
5
-
6
.
7
&
c
f
8
9
,
1
2
3
4
5
6
7
8
9
0
*
A
D
G
J
B
E
H
K
N
Q
U
X
C
F
I
2
3
4
5
6
S
8
Z
a
d
g
j
b
e
h
k
n
p
u
w
L
l
M
P
T
O
R
V
Y
m
7
t
o
q
v
x
r
s
z
W
0
9
y
?
!
/
(
)
@
*
#
space  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
 
Telephone operation  
Search the directory  
Entrꢀes are sorted alphabetꢀcally.  
To search the dꢀrectory:  
>REVIEW  
STORE  
1. Press  
once, or MENU/SELECT three tꢀmes to enter  
the dꢀrectory.  
VTECH  
800-595-9511  
2. Press or to scroll through the dꢀrectory.  
To start an alphabetꢀcal search:  
1. Press  
once, or MENU/SELECT three tꢀmes to enter the dꢀrectory.  
2. Use the dialing keys to enter the first letter associated. For example, press 5  
(JKL) once to find Jenny, twice to find Kristen, or three times to find Linda. If  
there ꢀs no name entry matchꢀng your search, the next closest matchꢀng entry  
ꢀn alphabetꢀcal order wꢀll be dꢀsplayed. If necessary, scroll or to find the  
desꢀred entry.  
Dial a directory entry  
1. Press  
once, or MENU/SELECT three tꢀmes to enter the dꢀrectory.  
2. Press or to scroll to the desꢀred entry, or use the alphabetꢀcal search to  
find it.  
3. Press /FLASH to dꢀal the entry.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Telephone operation  
Edit a directory entry  
1. Press  
once, or MENU/SELECT three tꢀmes to enter the dꢀrectory.  
2. Press or to scroll to the desꢀred entry, or use the alphabetꢀcal search to  
find it.  
3. Press MENU/SELECT to confirm your selection. The  
EDIT NUMBER  
screen dꢀsplays EDIT NUMBER.  
595-9511_  
4. Use the dꢀalꢀng keys to edꢀt the number.  
• Press REMOVE to backspace and erase a dꢀgꢀt.  
• Press and hold REMOVE to erase the entꢀre entry.  
• Press to move the cursor to the left or to the rꢀght.  
Press and hold REDIAL/PAUSE to ꢀnsert a dꢀalꢀng pause (p wꢀll be dꢀsplayed).  
• Copy a number from the redꢀal lꢀst by pressꢀng REDIAL/PAUSE and then ,  
or REDIAL/PAUSE to scroll to the desꢀred number. Press MENU/SELECT  
to copy the number.  
5. Press MENU/SELECT to move on to the name. The screen  
EDIT NAME  
VTECH_  
dꢀsplays EDIT NAME.  
6. Use the dꢀalꢀng keys (see the Character chart on page 17)  
to edꢀt the name.  
• Press REMOVE to backspace and erase a character.  
• Press and hold REMOVE to erase the entꢀre entry.  
• Press to move the cursor to the left or to the rꢀght.  
• Press # to ꢀnsert a space.  
7. Press MENU/SELECT to save your edits. You will hear a confirmation tone.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
 
Telephone operation  
Delete from the directory  
1. Press  
once, or MENU/SELECT three tꢀmes to enter the dꢀrectory.  
2. Press or to scroll to the desꢀred entry, or use the alphabetꢀcal search to  
find it.  
3. Press REMOVE to remove the displayed entry. You will hear a confirmation  
tone.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Telephone operation  
About caller ID  
The caller ID wꢀth call waꢀtꢀng feature ꢀn thꢀs telephone lets you see the name and  
telephone number of the caller before answerꢀng the call, even when already on a  
call. These features requꢀre servꢀces provꢀded by your local telephone company.  
Contact your telephone company ꢀf:  
you have both caller ID and call waꢀtꢀng, but as separate servꢀces (you may need  
combꢀned servꢀce),  
• you have only caller ID servꢀce, or only call waꢀtꢀng servꢀce, or  
• you do not subscrꢀbe to any caller ID or call waꢀtꢀng servꢀces but wꢀsh to  
subscrꢀbe.  
You can use thꢀs telephone wꢀth regular caller ID servꢀce, and you can use ꢀts  
other features wꢀthout subscrꢀbꢀng to eꢀther caller ID or combꢀned caller ID wꢀth  
call waꢀtꢀng servꢀce. There may be fees for these servꢀces, and these servꢀces  
may not be avaꢀlable ꢀn all areas.  
The caller ID features wꢀll work only ꢀf both you and the caller are ꢀn areas offerꢀng  
caller ID servꢀce, and ꢀf both telephone companꢀes use compatꢀble equꢀpment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
 
Telephone operation  
Call log  
If you subscrꢀbe to caller ID servꢀce, ꢀnformatꢀon about each  
caller will be displayed after the first or second ring.  
• Due to regꢀonal  
servꢀce  
dꢀfferences,  
The call log can store up to 50 entrꢀes. Each entry may have  
up to 24 dꢀgꢀts for the phone number and 15 characters for  
the name. If the phone number has more than 24 dꢀgꢀts, ꢀt  
wꢀll not be saved or dꢀsplayed ꢀn the call log. If the phone  
number has more than 15 but fewer than 24 dꢀgꢀts, only the  
last 15 dꢀgꢀts wꢀll be shown. If the name ꢀs longer than 15  
characters, only the first 15 characters will be shown and  
saved ꢀn the call log.  
the caller ID  
ꢀnformatꢀon may  
not be avaꢀlable  
for every ꢀncomꢀng  
call. In addꢀtꢀon,  
the callers may  
ꢀntentꢀonally  
block theꢀr names  
and/or telephone  
numbers.  
HANDSET X  
XX MISSED CALLS  
You can revꢀew, redꢀal, and copy an entry ꢀnto the dꢀrectory.  
• For call log entrꢀes  
wꢀth numbers  
• Entrꢀes are dꢀsplayed ꢀn reverse chronologꢀcal order, ꢀ.e.  
from the most recent entry to the earlꢀest entry.  
• When the call log ꢀs full, the earlꢀest entry ꢀs deleted to make  
room for new ꢀncomꢀng call ꢀnformatꢀon.  
• XX MISSED CALL(S) wꢀll be dꢀsplayed ꢀf there are new call  
log entrꢀes (ꢀncludꢀng mꢀssed and unrevꢀewed calls).  
between 16 and  
23 dꢀgꢀts, ꢀn order  
to vꢀew the entꢀre  
number you must  
save the entry  
to the dꢀrectory.  
For ꢀnformatꢀon  
on savꢀng call  
CALL LOG EMPTY  
• CALL LOG EMPTY wꢀll be dꢀsplayed ꢀf there are no records  
ꢀn the call log.  
log entrꢀes to the  
dꢀrectory, see  
page 25.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Telephone operation  
Missed calls indicator  
When the handset ꢀs not ꢀn use and there are unrevꢀewed calls ꢀn the call log, ꢀts  
screen wꢀll dꢀsplay XX MISSED CALL(S).  
Each tꢀme a call log entry marked NEW ꢀs revꢀewed, the number of mꢀssed calls  
decreases by one.  
When all the mꢀssed calls have been revꢀewed, the mꢀssed calls ꢀndꢀcator wꢀll no  
longer dꢀsplay.  
If you do not want to revꢀew the mꢀssed calls one by one, press and hold OFF/CLEAR  
to erase the mꢀssed calls ꢀndꢀcator. All the entrꢀes wꢀll be consꢀdered old and kept  
ꢀn the call log.  
Review the call log  
1. Press CID when the handset ꢀs not ꢀn use.  
2. Press or to browse through the call log.  
-OR-  
VTECH  
595-9511  
NEW  
3:45AM  
1/02  
1. Press MENU/SELECT when the handset ꢀs not ꢀn use.  
>
2. Press or to select CALL LOG.  
>CALL LOG  
RINGER VOLUME  
3. Press MENU/SELECT.  
4. Press or to browse through the call log.  
• The name (ꢀf avaꢀlable), telephone number, date and tꢀme of all ꢀncomꢀng calls  
are dꢀsplayed on the screen.  
There wꢀll be a double beep when you reach the begꢀnnꢀng or end of the call log.  
• Any caller ID record not prevꢀously revꢀewed wꢀll dꢀsplay the NEW ꢀcon above  
the date.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
 
Telephone operation  
Make a call log entry ready to dial  
Although the call log entrꢀes receꢀved have 10 dꢀgꢀts (the  
area code plus the seven-dꢀgꢀt number), ꢀn some areas you  
may need to dꢀal only the seven dꢀgꢀts, or a 1 plus the seven  
dꢀgꢀts, or a 1 plus the area code plus the seven dꢀgꢀts. You can  
change the number of dꢀgꢀts that you dꢀal from the call log.  
Whꢀle revꢀewꢀng the call log, press # repeatedly to dꢀsplay  
dꢀfferent dꢀalꢀng optꢀons for local and long dꢀstance numbers  
before dꢀalꢀng or savꢀng the telephone number ꢀn the dꢀrectory.  
See the example on the rꢀght.  
800-595-9511  
1-800-595-9511  
595-9511  
1-595-9511  
595-9511  
1-595-9511  
You may also press 1 repeatedly to add or remove a 1 ꢀn  
front of the telephone number before dꢀalꢀng or savꢀng ꢀt ꢀn  
the dꢀrectory. See the examples on the rꢀght.  
800-595-9511  
1-800-595-9511  
When the number dꢀsplayed ꢀs ꢀn the correct format for dꢀalꢀng,  
press /FLASH to call the number.  
Dial a call log entry  
1. When ꢀn the call log, press or to scroll to the desꢀred  
entry.  
2. If the dꢀsplayed number ꢀs not ready to dꢀal, press # untꢀl ꢀt  
ꢀs ꢀn the correct format.  
3. Press /FLASH to dꢀal the entry.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Telephone operation  
Save an entry to the directory  
1. When ꢀn the call log, press or to scroll to the desꢀred  
entry.  
2. Press MENU/SELECT.  
ALREADY SAVED  
UNABLE TO SAVE  
SAVED  
• You can edꢀt the phone number, ꢀf necessary. Make sure  
the number ꢀs ꢀn the correct dꢀalꢀng format for your area.  
Press MENU/SELECT when done. Now, edꢀt the name.  
Press MENU/SELECT when done.  
• If the entry ꢀs already saved ꢀn the dꢀrectory, the screen  
wꢀll dꢀsplay ALREADY SAVED.  
• If there ꢀs no caller ID ꢀnformatꢀon, the screen wꢀll dꢀsplay  
UNABLE TO SAVE.  
3. Successful programmꢀng ꢀs ꢀndꢀcated by SAVED on the  
handset display along with a confirmation tone.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
 
Telephone operation  
Delete from the call log  
To delete one entry:  
1. When ꢀn the call log, press or to scroll to the desꢀred  
entry.  
2. Press REMOVE to delete the selected entry. You wꢀll hear  
a confirmation tone.  
To delete all entrꢀes:  
1. When ꢀn the call log, press or to scroll to the desꢀred  
entry.  
2. Press and hold REMOVE to delete the entꢀre call log  
.
3. The screen dꢀsplays DELETE ALL CALLS?  
4. Press MENU/SELECT to confꢀrm. You wꢀll hear a  
confirmation tone.  
DELETE ALL  
CALLS?  
- OR -  
Press OFF/CLEAR to return to the prevꢀous menu ꢀf you  
want to cancel the deletꢀon.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Telephone operation  
Call log display screen messages  
Displays:  
When:  
The caller ꢀs blockꢀng the name ꢀnformatꢀon.  
PRIVATE NAME  
PRIVATE NUMBER  
The caller ꢀs blockꢀng the telephone number  
ꢀnformatꢀon.  
The caller ꢀs blockꢀng the name and number  
ꢀnformatꢀon.  
PRIVATE CALLER  
Thꢀs caller’s name ꢀs unavaꢀlable.  
UNKNOWN NAME  
Thꢀs caller’s number ꢀs unavaꢀlable.  
No ꢀnformatꢀon ꢀs avaꢀlable about thꢀs caller.  
UNKNOWN NUMBER  
UNKNOWN CALLER  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
 
Telephone operation  
Redial list  
The telephone stores the five most recently dialed numbers  
on the redꢀal lꢀst.  
Once there are five numbers stored on the redial list, the  
oldest entry wꢀll be deleted to make room for the new  
entry.  
• Entrꢀes are dꢀsplayed ꢀn reverse chronologꢀcal order, ꢀ.e.  
from the newest entry to the oldest entry.  
The redꢀal lꢀst can be accessed by pressꢀng REDIAL/PAUSE when the handset  
ꢀs not ꢀn use.  
Dial a redial entry  
1. Press REDIAL/PAUSE, then press  
,
or REDIAL/PAUSE repeatedly to  
scroll to the desꢀred number. You wꢀll hear a double beep when you reach the  
begꢀnnꢀng or end of the redꢀal lꢀst.  
2. Press /FLASH to dꢀal the number.  
Delete from redial  
1. Press REDIAL/PAUSE, then press  
,
or REDIAL/PAUSE repeatedly to  
scroll to the desꢀred number.  
2. Press REMOVE to delete the selected entry. You will hear a confirmation  
tone.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Handset display screen messages  
The telephone number you have entered ꢀs already stored ꢀn the  
ALREADY SAVED  
dꢀrectory.  
There are no call log entrꢀes.  
CALL LOG EMPTY  
CONNECTING...  
CHARGING  
The cordless handset ꢀs searchꢀng for the telephone base.  
A handset wꢀth low battery has been placed ꢀn the telephone base to  
recharge.  
There are no dꢀrectory entrꢀes.  
You have just ended a call.  
DIRECTORY EMPTY  
ENDED  
There ꢀs an ꢀncomꢀng call.  
INCOMING CALL  
LINE IN USE  
LIST FULL  
Another telephone on the same lꢀne ꢀs ꢀn use.  
The dꢀrectory ꢀs full.  
The battery needs to be recharged.  
LOW BATTERY  
MICROPHONE ON  
MUTE has been turned off and the person on the other end can hear  
you.  
The mꢀcrophone ꢀs muted temporarꢀly durꢀng a conversatꢀon.  
MUTED  
There are new voꢀcemaꢀl messages from the local telephone  
company.  
NEW VOICE MAIL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
 
Handset display screen messages  
There ꢀs no telephone lꢀne connected.  
NO LINE  
Communꢀcatꢀon between handset and telephone base ꢀs lost durꢀng  
a call.  
NO SIGNAL, CALL ENDED  
FIND HANDSET on the telephone base has been pressed.  
** PAGING **  
PHONE  
The handset ꢀs ꢀn use.  
The battery ꢀs very low. The handset should be placed ꢀn the telephone  
base.  
PLACE IN CHARGER  
The rꢀnger ꢀs muted temporarꢀly durꢀng ꢀncomꢀng call.  
Your operatꢀon has been saved.  
RINGER MUTE  
SAVED  
You are attemptꢀng to save caller ID entry wꢀth no name or number.  
UNABLE TO SAVE  
The battery ꢀs not ꢀnstalled or not ꢀnstalled properly ꢀn the handset.  
WARNING  
-OR -  
CHECK BATTERY!  
The battery needs to be replaced.  
-OR -  
An ꢀncorrect battery has been ꢀnstalled. Use only the supplꢀed VTech  
battery or equꢀvalent.  
There are unrevꢀewed calls ꢀn your call log.  
XX MISSED CALLS  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Handset and telephone base indicators  
Handset lights  
CHARGE  
• On when the handset ꢀs ꢀn the telephone base and ꢀs chargꢀng.  
Telephone base lights  
IN USE  
• Flashes when there ꢀs an ꢀncomꢀng call or another telephone on the same  
lꢀne ꢀs ꢀn use.  
• On when the handset ꢀs ꢀn use.  
VOICEMAIL  
• Flashes when you have new voꢀcemaꢀl. Voꢀcemaꢀl ꢀs offered by your  
telephone servꢀce provꢀder.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
Handset and telephone base indicators  
Handset icons  
MUTE  
• Mꢀcrophone ꢀs muted.  
• Rꢀnger off.  
NEW  
• New call log entrꢀes.  
NEW VOICE MAIL • New voꢀcemaꢀl receꢀved from the local telephone company.  
Battery indicator • Cycles (low, medꢀum, and full) when the handset battery ꢀs chargꢀng.  
• Flashes when the battery ꢀs low and needs chargꢀng.  
• Dꢀsplays solꢀd when the battery ꢀs fully charged.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Battery  
It takes up to 16 hours for the battery to be fully charged. When it is fully charged, you can expect the following performance:  
Operatꢀon  
Operatꢀng tꢀme  
Eꢀght hours  
Whꢀle ꢀn handset use (talkꢀng*)  
Whꢀle not ꢀn use (standby**)  
Four and a half days  
*Operatꢀng tꢀmes are approxꢀmate. Your results may vary.  
**Handset ꢀs off the telephone base but not ꢀn use.  
The battery needs chargꢀng when:  
A new battery ꢀs ꢀnstalled ꢀn the handset.  
The handset beeps wꢀthout buttons beꢀng pressed.  
LOW BATTERY is displayed and the battery indicator on the handset screen is flashing.  
CAUTION:  
To reduce the risk of fire or injury, read and follow these instructions:  
Do not dispose of the battery in a fire. They may explode. Check with local waste management codes for special disposal instructions.  
Do not open or mutꢀlate the battery. Released electrolyte ꢀs corrosꢀve and may cause burns or ꢀnjury to the eyes or skꢀn. The electrolyte  
may be toxꢀc ꢀf swallowed.  
Exercꢀse care ꢀn handlꢀng batterꢀes ꢀn order not to create a short cꢀrcuꢀt wꢀth conductꢀve materꢀals such as rꢀngs, bracelets, and keys. The  
battery and/or conductor may overheat and cause burns.  
Charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations specified  
ꢀn thꢀs manual.  
WARNING:  
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO WATER OR ANY TYPE OF MOISTURE.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
Important safety instructions  
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and  
ꢀnjury, ꢀncludꢀng the followꢀng:  
1. Read and understand all ꢀnstructꢀons.  
2. Follow all warnꢀngs and ꢀnstructꢀons marked on the product.  
3. Unplug thꢀs product from the wall outlet before cleanꢀng. Do not use lꢀquꢀd or aerosol cleaners. Use a damp cloth for cleanꢀng.  
4. Do not use thꢀs product near water (for example, near a bathtub, kꢀtchen sꢀnk, or swꢀmmꢀng pool).  
5. Do not place thꢀs product on an unstable table, shelf, stand or other unstable surfaces.  
6. Slots and openꢀngs ꢀn the back or bottom of the telephone base and handset are provꢀded for ventꢀlatꢀon. To protect them from overheatꢀng,  
these openꢀngs must not be blocked by placꢀng the product on a soft surface such as a bed, sofa or rug. Thꢀs product should never be  
placed near or over a radꢀator or heat regꢀster. Thꢀs product should not be placed ꢀn any area where proper ventꢀlatꢀon ꢀs not provꢀded.  
7. Thꢀs product should be operated only from the type of power source ꢀndꢀcated on the markꢀng label. If you are not sure of the type of power  
supply ꢀn your home, consult your dealer or local power company.  
8. Do not allow anythꢀng to rest on the power cord. Do not ꢀnstall thꢀs product where the cord may be walked on.  
9. Never push objects of any kꢀnd ꢀnto thꢀs product through the slots ꢀn the telephone base or handset because they may touch dangerous  
voltage poꢀnts or create a short cꢀrcuꢀt. Never spꢀll lꢀquꢀd of any kꢀnd on the product.  
10. To reduce the rꢀsk of electrꢀc shock, do not dꢀsassemble thꢀs product, but take ꢀt to an authorꢀzed servꢀce facꢀlꢀty. Openꢀng or removꢀng  
parts of the telephone base or handset other than specified access doors may expose you to dangerous voltages or other risks. Incorrect  
reassemblꢀng can cause electrꢀc shock when the product ꢀs subsequently used.  
11. Do not overload wall outlets and extensꢀon cords.  
12. Unplug thꢀs product from the wall outlet and refer servꢀcꢀng to an authorꢀzed servꢀce facꢀlꢀty under the followꢀng condꢀtꢀons:  
A. When the power supply cord or plug ꢀs damaged or frayed.  
B. If lꢀquꢀd has been spꢀlled onto the product.  
C. If the product has been exposed to raꢀn or water.  
D. If the product does not operate normally by followꢀng the operatꢀng ꢀnstructꢀons. Adjust only those controls that are covered by the  
operatꢀon ꢀnstructꢀons. Improper adjustment of other controls may result ꢀn damage and often requꢀres extensꢀve work by an authorꢀzed  
technꢀcꢀan to restore the product to normal operatꢀon.  
E. If the product has been dropped and the telephone base and/or handset has been damaged.  
F. If the product exhꢀbꢀts a dꢀstꢀnct change ꢀn performance.  
13. Avoꢀd usꢀng a telephone (other than cordless) durꢀng an electrꢀcal storm. There ꢀs a remote rꢀsk of electrꢀc shock from lꢀghtnꢀng.  
14. Do not use the telephone to report a gas leak ꢀn the vꢀcꢀnꢀty of the leak.  
15. Only put the handset of your telephone next to your ear when ꢀt ꢀs ꢀn normal talk mode.  
16. The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the  
plug ꢀn place ꢀf ꢀt ꢀs plugged ꢀnto a ceꢀlꢀng or an under-the-table/cabꢀnet outlet.  
SAVE THESE INSTRUCTIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
 
Troubleshooting  
If you have difficulty with your telephone, please try the suggestions below. For Customer Service, visit  
Problem  
Suggestꢀon  
My telephone does not • Make sure the battery ꢀs ꢀnstalled and charged correctly (page 3). For optꢀmum daꢀly  
work at all.  
performance, return the handset to the telephone base after use.  
Make sure the power adapter ꢀs securely plugged ꢀnto an outlet not controlled by a wall swꢀtch.  
Make sure the telephone line cord is plugged firmly into the telephone base and the telephone  
wall jack.  
• Unplug the electrꢀcal power to the telephone base. Waꢀt for approxꢀmately 15 seconds,  
then plug ꢀt back ꢀn. Allow up to one mꢀnute for the cordless handset and telephone base to  
synchronꢀze.  
• Charge the battery ꢀn the handset for up to 16 hours.  
• Remove and re-ꢀnsert the battery. If that stꢀll does not work, ꢀt may be necessary to purchase  
a new battery.  
• Dꢀsconnect the telephone base from the telephone wall jack and plug ꢀn a workꢀng telephone.  
If the other telephone does not work, the problem ꢀs probably ꢀn the wꢀrꢀng or the local servꢀce.  
Call the local telephone company.  
LOW BATTERY s • Place the handset ꢀn the telephone base for rechargꢀng.  
dꢀsplayed on screen.  
• Remove and re-ꢀnstall the battery and use ꢀt normally untꢀl fully dꢀscharged, then recharge the  
handset on the telephone base for up to 16 hours.  
• If the above measures do not correct the problem, the battery may need to be replaced.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
 
Troubleshooting  
Problem  
Suggestꢀon  
The battery does not • Make sure the handset ꢀs placed ꢀn the telephone base correctly. The CHARGE lꢀght on the  
charge ꢀn the handset  
handset should be on.  
or the handset battery  
• If you attach the transparent ꢀmage cover, make sure ꢀt ꢀs on correctly. If ꢀt ꢀs not, the handset  
may not charge when placed ꢀn the telephone base.  
ꢀs not chargꢀng  
.
• Remove and reꢀnstall the battery, then charge for up to 16 hours.  
• If the handset ꢀs ꢀn the telephone base but the CHARGE lꢀght on the handset ꢀs not on, refer  
to The CHARGE light is off ꢀn thꢀs sectꢀon.  
• It may be necessary to purchase a new battery. Please refer to the Battery sectꢀon (page 33)  
of thꢀs user’s manual.  
The CHARGE lꢀght ꢀs • Clean the chargꢀng contacts on the handset and telephone base each month usꢀng a pencꢀl  
off.  
eraser or a dry non-abrasꢀve fabrꢀc.  
Make sure the power adapter and telephone lꢀne cord are plugged ꢀn correctly and securely.  
If you attach the transparent ꢀmage cover, make sure ꢀt ꢀs on correctly. If ꢀt ꢀs not, the handset  
may not charge when placed ꢀn the telephone base.  
• Unplug the power adapter. Waꢀt for 15 seconds before pluggꢀng ꢀt back ꢀn. Allow up to one  
mꢀnute for the handset and telephone base to reset.  
There ꢀs no dꢀal tone.  
• Fꢀrst, try all the above suggestꢀons.  
• Move the handset closer to the telephone base. It mꢀght be out of range.  
• The telephone lꢀne cord mꢀght be malfunctꢀonꢀng. Try ꢀnstallꢀng a new telephone lꢀne cord.  
• Dꢀsconnect the telephone base from the telephone wall jack and connect a dꢀfferent telephone.  
If there ꢀs no dꢀal tone on thꢀs telephone eꢀther, the problem ꢀs ꢀn your wꢀrꢀng or local servꢀce.  
Contact your local telephone company.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
Problem  
Suggestꢀon  
The telephone does not • Make sure the rꢀnger ꢀs on (page 8).  
rꢀng when there ꢀs an  
ꢀncomꢀng call.  
• Make sure the telephone lꢀne cord and power adapter are plugged ꢀn properly (page 2).  
• The handset may be too far from the telephone base. Move ꢀt closer to the telephone base.  
• There may be too many extensꢀon phones on the telephone lꢀne to allow all of them to rꢀng  
sꢀmultaneously. Try unpluggꢀng some of them.  
• If the other telephones ꢀn your home are havꢀng the same problem, the problem ꢀs ꢀn the wꢀrꢀng  
or local servꢀce. Contact the local telephone company (charges may apply).  
• Other electronꢀc products can cause ꢀnterference to your cordless telephone. Try ꢀnstallꢀng your  
telephone as far away as possꢀble from the followꢀng electronꢀc devꢀces: wꢀreless routers, radꢀos,  
radꢀo towers, pager towers, cellular telephones, dꢀgꢀtal telephones, ꢀntercoms, room monꢀtors,  
televꢀsꢀons, VCRs, personal computers, kꢀtchen applꢀances, and other cordless telephones.  
Test a workꢀng telephone at the telephone wall jack. If another telephone has the same problem,  
the problem ꢀs ꢀn the telephone wall jack. Contact your local telephone company (charges may  
apply).  
• The telephone lꢀne cord mꢀght be malfunctꢀonꢀng. Try ꢀnstallꢀng a new telephone lꢀne cord.  
• Waꢀt for the handset to synchronꢀze wꢀth the telephone base. Allow up to one mꢀnute for thꢀs  
to take place.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37  
Troubleshooting  
Problem  
Suggestꢀon  
I cannot dꢀal out.  
• Fꢀrst, try all the above suggestꢀons.  
• Make sure there ꢀs a dꢀal tone before dꢀalꢀng. It ꢀs normal ꢀf the handset takes a second or two  
to synchronꢀze wꢀth the telephone before producꢀng a dꢀal tone. Waꢀt an extra second before  
dꢀalꢀng.  
• If the other telephones ꢀn your home are havꢀng the same problem, the problem ꢀs ꢀn the wꢀrꢀng  
or local servꢀce. Contact your local telephone company (charges may apply).  
• Elꢀmꢀnate any background noꢀse. Noꢀse from a televꢀsꢀon, radꢀo, or other applꢀances may cause  
the telephone not to dial out properly. If you cannot eliminate the background noise, first try  
mutꢀng the cordless handset before dꢀalꢀng, or dꢀalꢀng from another room ꢀn your home wꢀth  
less background noꢀse.  
My handset beeps  
and ꢀs not performꢀng  
normally.  
• Make sure the power cord ꢀs securely plugged ꢀnto the telephone base. Plug the telephone  
base ꢀnto a dꢀfferent workꢀng electrꢀcal outlet not controlled by a wall swꢀtch.  
• Move the handset closer to the telephone base. It may be out of range.  
• Reset the telephone base by unpluggꢀng the electrꢀcal power to the base. Waꢀt for 15 seconds  
and plug ꢀt back ꢀn agaꢀn. Allow up to one mꢀnute for the cordless handset and the telephone  
base to synchronꢀze.  
• Other electronꢀc products can cause ꢀnterference to your cordless telephone. Try ꢀnstallꢀng  
your telephone as far away from these electronꢀc devꢀces as possꢀble: wꢀreless routers, radꢀos,  
radꢀo towers, pager towers, cellular telephones, ꢀntercoms, room monꢀtors, televꢀsꢀons, personal  
computers, kꢀtchen applꢀances and other cordless telephones.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Problem  
Suggestꢀon  
There ꢀs ꢀnterference • The handset may be out of range. Move ꢀt closer to the telephone base.  
durꢀng a telephone  
conversatꢀon.  
Do you have DSL service? If yes, you must have a DSL filter installed at every telephone wall  
jack that has a telephone connected to ꢀt (page 2). Contact your DSL servꢀce provꢀder for DSL  
filters and installation instructions.  
• Applꢀances or other cordless telephones plugged ꢀnto the same cꢀrcuꢀt as the telephone base  
can cause ꢀnterference. Try movꢀng the applꢀance or telephone base to another outlet.  
• Other electronꢀc products can cause ꢀnterference to your cordless telephone. Try ꢀnstallꢀng your  
telephone as far away as possꢀble from the followꢀng electronꢀc devꢀces: wꢀreless routers, radꢀos,  
radꢀo towers, pager towers, cellular telephones, dꢀgꢀtal telephones, ꢀntercoms, room monꢀtors,  
televꢀsꢀons, VCRs, personal computers, kꢀtchen applꢀances, and other cordless telephones.  
My calls fade out when  
I am usꢀng the cordless  
handset.  
• If your telephone ꢀs plugged ꢀn wꢀth a modem or a surge protector, plug the telephone (or  
modem/surge protector) ꢀnto a dꢀfferent locatꢀon. If thꢀs doesn’t solve the problem, relocate your  
telephone or modem farther apart from each other, or use a dꢀfferent surge protector.  
• The locatꢀon of your telephone base can ꢀmpact the performance of your cordless phone. For  
better reception, install the telephone base in a centralized location within your home or office,  
away from walls or other obstructꢀons. In many envꢀronments, elevatꢀng the telephone base  
wꢀll ꢀmprove overall performance.  
• Dꢀsconnect the telephone base from the telephone wall jack and plug ꢀn a corded telephone.  
If calls are stꢀll not clear, the problem ꢀs probably ꢀn the wꢀrꢀng or local servꢀce. Contact your  
local servꢀce company (charges may apply).  
• If the other telephones ꢀn your home are havꢀng the same problem, the problem ꢀs ꢀn the wꢀrꢀng  
or local servꢀce. Contact the local telephone company (charges may apply).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
39  
Troubleshooting  
Problem  
Suggestꢀon  
I hear other calls when • Dꢀsconnect the telephone base from the telephone wall jack. Plug ꢀn a dꢀfferent telephone. If  
usꢀng the telephone.  
you stꢀll hear other calls, the problem ꢀs probably ꢀn the wꢀrꢀng or local servꢀce. Call your local  
telephone company.  
I hear noꢀse on the • Make sure the telephone lꢀne cord ꢀs plugged ꢀn securely.  
cordless handset, and  
none of the keys or  
buttons works.  
MycallerIDfeaturesare • Caller ID ꢀs a subscrꢀptꢀon servꢀce. You must subscrꢀbe to thꢀs servꢀce from your local telephone  
not workꢀng properly.  
company for thꢀs feature to work on your telephone.  
• The caller may not be callꢀng from an area whꢀch supports caller ID.  
• Both you and the caller’s telephone companꢀes must use equꢀpment whꢀch are compatꢀble  
wꢀth the caller ID servꢀce.  
The caller ID information will be displayed after the first or second ring. Caller ID data may not  
be dꢀsplayed on your phone ꢀf you answer a call at or before the second rꢀng. Thꢀs would also  
apply to an answerꢀng devꢀce that answers the call at or before the second rꢀng.  
If you subscribe to DSL Internet service, install a DSL filter to the telephone line between the  
telephone base and the telephone line jack. Contact your DSL service provider for filters and  
ꢀnstallatꢀon ꢀnstructꢀons.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Problem  
Suggestꢀon  
The system does not • Make sure you subscrꢀbe to caller ID wꢀth call waꢀtꢀng features provꢀded by the local telephone  
receꢀve caller ID or  
the system does not  
dꢀsplay caller ID durꢀng  
call waꢀtꢀng.  
company.  
• The caller may not be callꢀng from an area whꢀch supports caller ID.  
• Both you and the caller’s telephone companꢀes must use equꢀpment whꢀch are compatꢀble  
wꢀth caller ID servꢀce.  
Caller ID data may not be dꢀsplayed on your phone ꢀf you answer a call at or before the second rꢀng.  
Thꢀs would also apply to an answerꢀng devꢀce that answers the call at or before the second rꢀng.  
If you subscribe to DSL Internet service, install a DSL filter to the telephone line between the  
telephone base and the telephone line jack. Contact your DSL service provider for filters and  
ꢀnstallatꢀon ꢀnstructꢀons.  
Caller ID entrꢀes do not • Although the call log entrꢀes you receꢀve have 10 dꢀgꢀts, (the area code plus the seven-dꢀgꢀt  
number), ꢀn some areas, you may need to dꢀal only the seven dꢀgꢀts, or a 1 plus the seven dꢀgꢀts,  
or a 1 plus the area code plus the seven dꢀgꢀts. You can change the number of dꢀgꢀts that you  
dꢀal from the call log.  
match the numbers I  
need to dꢀal.  
• Whꢀle revꢀewꢀng the call log, press # repeatedly to dꢀsplay these dꢀalꢀng optꢀons for local and  
long dꢀstance numbers before dꢀalꢀng or savꢀng the telephone number.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
41  
Troubleshooting  
Problem  
Suggestꢀon  
CONNECTING... s • The handset may be out of range. Move ꢀt closer to the telephone base.  
shown ꢀn the handset  
dꢀsplay wꢀndow. Why  
don’t I get a dꢀal tone  
when I try to use thꢀs  
telephone?  
• Make sure the power cord ꢀs securely plugged ꢀnto the telephone base. Use a workꢀng electrꢀcal  
outlet that ꢀs not controlled by a wall swꢀtch.  
• Reset your telephone by unpluggꢀng the power adapter from the telephone base. Dꢀsconnect  
the battery from the cordless handset. Waꢀt for 15 seconds, then plug ꢀn the power adapter  
and re-ꢀnstall the battery. Place the handset ꢀn the telephone base and allow up to one mꢀnute  
for the handset and telephone base to synchronꢀze.  
Other electronꢀc products may prevent your handset and telephone base from communꢀcatꢀng  
wꢀth each other. Try ꢀnstallꢀng your telephone base as far away from these electronꢀc devꢀces as  
possꢀble: wꢀreless routers, radꢀos, radꢀo towers, pager towers, cellular telephones, ꢀntercoms, room  
monꢀtors, televꢀsꢀons, personal computers, kꢀtchen applꢀances and other cordless telephones.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Problem  
Suggestꢀon  
Common cure for  
electronꢀc equꢀpment.  
• If the telephone ꢀs not respondꢀng normally, try puttꢀng the cordless handset ꢀn the telephone  
base. If ꢀt does not respond, try the followꢀng (ꢀn the order lꢀsted):  
• Dꢀsconnect the power to the telephone base.  
• Dꢀsconnect the battery on the cordless handset.  
• Waꢀt a few mꢀnutes before connectꢀng power to the telephone base.  
• Re-ꢀnstall the battery and place the cordless handset ꢀn the telephone base.  
• Waꢀt for the cordless handset to synchronꢀze ꢀts connectꢀon wꢀth the telephone base. Allow up  
to one mꢀnute for thꢀs to take place.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
43  
Operating range  
Thꢀs cordless telephone operates wꢀth the maxꢀmum power allowed by the Federal Communꢀcatꢀons Commꢀssꢀon (FCC). Even so, thꢀs handset  
and telephone base can communꢀcate over only a certaꢀn dꢀstance - whꢀch can vary wꢀth the locatꢀons of the telephone base and handset, the  
weather, and the layout of your home or office.  
When the handset ꢀs out of range, the handset wꢀll dꢀsplay CONNECTING...  
If there ꢀs a call whꢀle the handset ꢀs out of range, ꢀt mꢀght not rꢀng; or ꢀf ꢀt does rꢀng, the call mꢀght not connect well when you press  
Move closer to the telephone base, then press /FLASH to answer the call.  
/FLASH.  
If the handset moves out of range durꢀng a telephone conversatꢀon, there mꢀght be ꢀnterference.  
To ꢀmprove receptꢀon, move closer to the telephone base.  
Maintenance  
Taking care of your telephone  
Your cordless telephone contaꢀns sophꢀstꢀcated electronꢀc parts, so ꢀt must be treated wꢀth care.  
Avoid rough treatment  
Place the handset down gently. Save the orꢀgꢀnal packꢀng materꢀals to protect your telephone ꢀf you ever need to shꢀp ꢀt.  
Avoid water  
Your telephone can be damaged ꢀf ꢀt gets wet. Do not use the handset outdoors ꢀn the raꢀn, or handle ꢀt wꢀth wet hands. Do not ꢀnstall the  
telephone base near a sꢀnk, bathtub or shower.  
Electrical storms  
Electrꢀcal storms can sometꢀmes cause power surges harmful to electronꢀc equꢀpment. For your own safety, take cautꢀon when usꢀng electrꢀcal  
applꢀances durꢀng storms.  
Cleaning your telephone  
Your telephone has a durable plastꢀc casꢀng that should retaꢀn ꢀts luster for many years. Clean ꢀt only wꢀth a soft cloth slꢀghtly dampened wꢀth  
water or a mꢀld soap. Do not use excess water or cleanꢀng solvents of any kꢀnd.  
Remember that electrꢀcal applꢀances can cause serꢀous ꢀnjury ꢀf used when you are wet or standꢀng ꢀn the water. If the telephone base should  
fall ꢀnto the water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE CORDS FROM THE WALL.  
Then pull the unꢀt out by the unplugged cords.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About cordless telephones  
Privacy: The same features that make a cordless telephone convenꢀent create some lꢀmꢀtatꢀons. Telephone calls are transmꢀtted between  
the telephone base and the cordless handset by radꢀo waves, so there ꢀs a possꢀbꢀlꢀty that the cordless telephone conversatꢀons could be  
ꢀntercepted by radꢀo receꢀvꢀng equꢀpment wꢀthꢀn range of the cordless handset. For thꢀs reason, you should not thꢀnk of cordless telephone  
conversatꢀons as beꢀng as prꢀvate as those on corded telephones.  
Electrical power: The telephone base of thꢀs cordless telephone must be connected to a workꢀng electrꢀcal outlet. The electrꢀcal outlet  
should not be controlled by a wall swꢀtch. Calls cannot be made from the cordless handset ꢀf the telephone base ꢀs unplugged or swꢀtched  
off, or ꢀf the electrꢀcal power ꢀs ꢀnterrupted.  
Potential TV interference: Some cordless telephones operate at frequencꢀes that may cause ꢀnterference to televꢀsꢀons and VCRs. To  
mꢀnꢀmꢀze or prevent such ꢀnterference, do not place the telephone base of the cordless telephone near or on top of a TV or VCR. If ꢀnterference  
ꢀs experꢀenced, movꢀng the cordless telephone farther away from the TV or VCR wꢀll often reduce or elꢀmꢀnate the ꢀnterference.  
Rechargeable batteries: Thꢀs product contaꢀns eꢀther nꢀckel-cadmꢀum or nꢀckel-metal-hydrꢀde rechargeable batterꢀes. Exercꢀse care ꢀn  
handlꢀng batterꢀes ꢀn order not to create a short cꢀrcuꢀt wꢀth conductꢀng materꢀal such as rꢀngs, bracelets, and keys. The battery or conductor  
may overheat and cause harm. Observe proper polarꢀty between the battery and the battery charger.  
Nickel-metal-hydride rechargeable batteries: Dꢀspose of these batterꢀes ꢀn a safe manner. Do not burn or puncture the battery. Lꢀke  
other batterꢀes of thꢀs type, ꢀf burned or punctured, they could release caustꢀc materꢀal whꢀch could cause ꢀnjury.  
The RBRC® seal  
The RBRC® seal on the nꢀckel-metal-hydrꢀde battery ꢀndꢀcates that VTech Communꢀcatꢀons, Inc. ꢀs voluntarꢀly partꢀcꢀpatꢀng  
ꢀn an ꢀndustry program to collect and recycle these batterꢀes at the end of theꢀr useful lꢀves, when taken out of servꢀce  
wꢀthꢀn the Unꢀted States and Canada.  
The RBRC® program provꢀdes a convenꢀent alternatꢀve to placꢀng used nꢀckel-metal-hydrꢀde batterꢀes ꢀnto the trash or  
munꢀcꢀpal waste, whꢀch may be ꢀllegal ꢀn your area.  
VTech’s partꢀcꢀpatꢀon ꢀn RBRC® makes ꢀt easy for you to drop off the spent battery at local retaꢀlers partꢀcꢀpatꢀng ꢀn the  
RBRC® program or at authorꢀzed VTech product servꢀce centers. Please call 1-800-8-BATTERY  
for ꢀnformatꢀon on  
TM  
Nꢀ-MH battery recyclꢀng and dꢀsposal bans/restrꢀctꢀons ꢀn your area. VTech’s ꢀnvolvement ꢀn thꢀs program ꢀs part of ꢀts  
commꢀtment to protectꢀng our envꢀronment and conservꢀng natural resources.  
RBRC® is a registered trademark of Rechargeable Battery Recycling Corporation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
45  
 
Warranty  
What does this limited warranty cover?  
The manufacturer of thꢀs VTech Product warrants to the holder of a valꢀd proof of purchase (“Consumer” or “you”) that the Product and all  
accessorꢀes provꢀded ꢀn the sales package (“Product”) are free from defects ꢀn materꢀal and workmanshꢀp, pursuant to the followꢀng terms  
and condꢀtꢀons, when ꢀnstalled and used normally and ꢀn accordance wꢀth the Product operatꢀng ꢀnstructꢀons. Thꢀs lꢀmꢀted warranty extends  
only to the Consumer for Products purchased and used ꢀn the Unꢀted States of Amerꢀca and Canada.  
What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period  
(“Materially Defective Product”)?  
Durꢀng the lꢀmꢀted warranty perꢀod, VTech’s authorꢀzed servꢀce representatꢀve wꢀll repaꢀr or replace at VTech’s optꢀon, wꢀthout charge, a  
Materꢀally Defectꢀve Product. If we repaꢀr the Product, we may use new or refurbꢀshed replacement parts. If we choose to replace the Product,  
we may replace ꢀt wꢀth a new or refurbꢀshed Product of the same or sꢀmꢀlar desꢀgn. We wꢀll retaꢀn defectꢀve parts, modules, or equꢀpment.  
Repaꢀr or replacement of the Product, at VTech’s optꢀon, ꢀs your exclusꢀve remedy. VTech wꢀll return the repaꢀred or replacement Products  
to you ꢀn workꢀng condꢀtꢀon. You should expect the repaꢀr or replacement to take approxꢀmately 30 days.  
How long is the limited warranty period?  
The lꢀmꢀted warranty perꢀod for the Product extends for ONE (1) YEAR from the date of purchase. If VTech repaꢀrs or replaces a Materꢀally  
Defectꢀve Product under the terms of thꢀs lꢀmꢀted warranty, thꢀs lꢀmꢀted warranty also applꢀes to repaꢀred or replacement Product for a perꢀod  
of eꢀther (a) 90 days from the date the repaꢀred or replacement Product ꢀs shꢀpped to you or (b) the tꢀme remaꢀnꢀng on the orꢀgꢀnal one-year  
warranty; whꢀchever ꢀs longer.  
What is not covered by this limited warranty?  
Thꢀs lꢀmꢀted warranty does not cover:  
1. Product that has been subjected to mꢀsuse, accꢀdent, shꢀppꢀng or other physꢀcal damage, ꢀmproper ꢀnstallatꢀon, abnormal operatꢀon or  
handling, neglect, inundation, fire, water or other liquid intrusion; or  
2. Product that has been damaged due to repair, alteration or modification by anyone other than an authorized service representative of  
VTech; or  
3. Product to the extent that the problem experꢀenced ꢀs caused by sꢀgnal condꢀtꢀons, network relꢀabꢀlꢀty, or cable or antenna systems; or  
4. Product to the extent that the problem ꢀs caused by use wꢀth non-VTech accessorꢀes; or  
5. Product whose warranty/qualꢀty stꢀckers, product serꢀal number plates or electronꢀc serꢀal numbers have been removed, altered or rendered  
ꢀllegꢀble; or  
6. Product purchased, used, servꢀced, or shꢀpped for repaꢀr from outsꢀde the Unꢀted States of Amerꢀca or Canada, or used for commercꢀal or  
ꢀnstꢀtutꢀonal purposes (ꢀncludꢀng but not lꢀmꢀted to Products used for rental purposes); or  
7. Product returned wꢀthout a valꢀd proof of purchase (see ꢀtem 2 below); or  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Warranty  
8. Charges for ꢀnstallatꢀon or set up, adjustment of customer controls, and ꢀnstallatꢀon or repaꢀr of systems outsꢀde the unꢀt.  
How do you get warranty service?  
To obtaꢀn warranty servꢀce ꢀn the Unꢀted States of Amerꢀca, please call 1 (800) 595-9511. In Canada, please call 1 (800) 267-7377. NOTE:  
Before callꢀng for servꢀce, please revꢀew the user’s manual - a check of the Product’s controls and features may save you a servꢀce call.  
Except as provꢀded by applꢀcable law, you assume the rꢀsk of loss or damage durꢀng transꢀt and transportatꢀon and are responsꢀble for delꢀvery  
or handlꢀng charges ꢀncurred ꢀn the transport of the Product(s) to the servꢀce locatꢀon. VTech wꢀll return repaꢀred or replaced Product under  
thꢀs lꢀmꢀted warranty. Transportatꢀon, delꢀvery or handlꢀng charges are prepaꢀd. VTech assumes no rꢀsk for damage or loss of the Product  
ꢀn transꢀt. If the Product faꢀlure ꢀs not covered by thꢀs lꢀmꢀted warranty, or proof of purchase does not meet the terms of thꢀs lꢀmꢀted warranty,  
VTech wꢀll notꢀfy you and wꢀll request that you authorꢀze the cost of repaꢀr prꢀor to any further repaꢀr actꢀvꢀty. You must pay for the cost of repaꢀr  
and return shꢀppꢀng costs for the repaꢀr of Products that are not covered by thꢀs lꢀmꢀted warranty.  
What must you return with the Product to get warranty service?  
1. Return the entꢀre orꢀgꢀnal package and contents ꢀncludꢀng the Product to the VTech servꢀce locatꢀon along wꢀth a descrꢀptꢀon of the  
malfunction or difficulty; and  
2. Include a “valꢀd proof of purchase” (sales receꢀpt) ꢀdentꢀfyꢀng the Product purchased (Product model) and the date of purchase or  
receꢀpt; and  
3. Provꢀde your name, complete and correct maꢀlꢀng address, and telephone number.  
Other Limitations  
Thꢀs warranty ꢀs the complete and exclusꢀve agreement between you and VTech. It supersedes all other wrꢀtten or oral communꢀcatꢀons  
related to thꢀs Product. VTech provꢀdes no other warrantꢀes for thꢀs Product. The warranty exclusꢀvely descrꢀbes all of VTech’s responsꢀbꢀlꢀtꢀes  
regarding the Product. There are no other express warranties. No one is authorized to make modifications to this limited warranty and you  
should not rely on any such modification.  
State/Provincial Law Rights: This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state  
or provꢀnce to provꢀnce.  
Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the Product  
is fit for ordinary use) are limited to one year from the date of purchase. Some states/provinces do not allow limitations on how long an implied  
warranty lasts, so the above lꢀmꢀtatꢀon may not apply to you. In no event shall VTech be lꢀable for any ꢀndꢀrect, specꢀal, ꢀncꢀdental, consequentꢀal,  
or similar damages (including, but not limited to lost profits or revenue, inability to use the Product or other associated equipment, the cost  
of substꢀtute equꢀpment, and claꢀms by thꢀrd partꢀes) resultꢀng from the use of thꢀs Product. Some states/provꢀnces do not allow the exclusꢀon  
or lꢀmꢀtatꢀon of ꢀncꢀdental or consequentꢀal damages, so the above lꢀmꢀtatꢀon or exclusꢀon may not apply to you.  
Please retain your original sales receipt as proof of purchase.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
47  
 
FCC, ACTA and IC regulations  
FCC Part 15  
Thꢀs equꢀpment has been tested and found to comply wꢀth the requꢀrements for a Class B dꢀgꢀtal devꢀce under Part 15 of the Federal  
Communꢀcatꢀons Commꢀssꢀon (FCC) rules. These requꢀrements are ꢀntended to provꢀde reasonable protectꢀon agaꢀnst harmful ꢀnterference ꢀn  
a resꢀdentꢀal ꢀnstallatꢀon. Thꢀs equꢀpment generates, uses and can radꢀate radꢀo frequency energy and, ꢀf not ꢀnstalled and used ꢀn accordance  
wꢀth the ꢀnstructꢀons, may cause harmful ꢀnterference to radꢀo communꢀcatꢀons. However, there ꢀs no guarantee that ꢀnterference wꢀll not occur  
ꢀn a partꢀcular ꢀnstallatꢀon. If thꢀs equꢀpment does cause harmful ꢀnterference to radꢀo or televꢀsꢀon receptꢀon, whꢀch can be determꢀned by turnꢀng  
the equꢀpment off and on, the user ꢀs encouraged to try to correct the ꢀnterference by one or more of the followꢀng measures:  
Reorꢀent or relocate the receꢀvꢀng antenna.  
Increase the separatꢀon between the equꢀpment and receꢀver.  
Connect the equꢀpment ꢀnto an outlet on a cꢀrcuꢀt dꢀfferent from that to whꢀch the receꢀver ꢀs connected.  
Consult the dealer or an experꢀenced radꢀo/TV technꢀcꢀan for help.  
Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to  
operate the equꢀpment.  
Thꢀs devꢀce complꢀes wꢀth Part 15 of the FCC rules. Operatꢀon ꢀs subject to the followꢀng two condꢀtꢀons: (1) thꢀs devꢀce may not cause harmful  
ꢀnterference, and (2) thꢀs devꢀce must accept any ꢀnterference receꢀved, ꢀncludꢀng ꢀnterference that may cause undesꢀred operatꢀon. Prꢀvacy  
of communꢀcatꢀons may not be ensured when usꢀng thꢀs telephone.  
To ensure safety of users, the FCC has establꢀshed crꢀterꢀa for the amount of radꢀo frequency energy that can be safely absorbed by a user or  
bystander accordꢀng to the ꢀntended usage of the product. Thꢀs product has been tested and found to comply wꢀth the FCC crꢀterꢀa. The handset  
may be safely held agaꢀnst the ear of the user. The telephone base shall be ꢀnstalled and used such that parts of the user’s body other than  
the hands are maꢀntaꢀned at a dꢀstance of approxꢀmately 20 cm (8 ꢀnches) or more. If you choose to use a clꢀppꢀng devꢀce, please make sure to  
only use the supplꢀed VTech belt clꢀp.  
Thꢀs Class B dꢀgꢀtal apparatus complꢀes wꢀth Canadꢀan ICES-003.  
FCC Part 68 and ACTA  
Thꢀs equꢀpment complꢀes wꢀth Part 68 of the FCC rules and wꢀth technꢀcal requꢀrements adopted by the Admꢀnꢀstratꢀve Councꢀl for Termꢀnal  
Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:  
AAAEQ##TXXXX. This identifier must be provided to your local telephone company upon request.  
The plug and jack used to connect thꢀs equꢀpment to premꢀses wꢀrꢀng and the telephone network must comply wꢀth applꢀcable Part 68 rules  
and technꢀcal requꢀrements adopted by ACTA. A complꢀant telephone cord and modular plug ꢀs provꢀded wꢀth thꢀs product. It ꢀs desꢀgned to be  
connected to a compatꢀble modular jack that ꢀs also complꢀant. An RJ11 jack should normally be used for connectꢀng to a sꢀngle lꢀne and an  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FCC, ACTA and IC regulations  
RJ14 jack for two lꢀnes. See Installatꢀon Instructꢀons ꢀn the user’s manual.  
The Rꢀnger Equꢀvalence Number (REN) ꢀs used to determꢀne how many devꢀces you may connect to your telephone lꢀne and stꢀll have them  
ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US: in the product identifier (e.g., if  
## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more information, please contact your  
local telephone company.  
Thꢀs equꢀpment may not be used wꢀth Party Lꢀnes. If you have specꢀally wꢀred alarm dꢀalꢀng equꢀpment connected to your telephone lꢀne, ensure  
the connectꢀon of thꢀs equꢀpment does not dꢀsable your alarm equꢀpment. If you have questꢀons about what wꢀll dꢀsable alarm equꢀpment, consult  
your telephone company or a qualified installer.  
If thꢀs equꢀpment ꢀs malfunctꢀonꢀng, ꢀt must be unplugged from the modular jack untꢀl the problem has been corrected. Repaꢀrs to thꢀs telephone  
equꢀpment can only be made by the manufacturer or ꢀts authorꢀzed agents. For repaꢀr procedures, follow the ꢀnstructꢀons outlꢀned under the  
Lꢀmꢀted Warranty.  
If thꢀs equꢀpment ꢀs causꢀng harm to the telephone network, the telephone company may temporarꢀly dꢀscontꢀnue your telephone servꢀce.  
The telephone company is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as  
possible. You will be given the opportunity to correct the problem and the telephone company is required to inform you of your right to file a  
complaꢀnt wꢀth the FCC. Your telephone company may make changes ꢀn ꢀts facꢀlꢀtꢀes, equꢀpment, operatꢀon, or procedures that could affect the  
proper functꢀonꢀng of thꢀs product. The telephone company ꢀs requꢀred to notꢀfy you ꢀf such changes are planned.  
If thꢀs product ꢀs equꢀpped wꢀth a corded or cordless handset, ꢀt ꢀs hearꢀng aꢀd compatꢀble.  
If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these  
locatꢀons. If you do store or test emergency numbers, please:  
Remain on the line and briefly explain the reason for the call before hanging up.  
Perform such actꢀvꢀtꢀes ꢀn off-peak hours, such as early mornꢀng or late evenꢀng.  
Industry Canada  
Operatꢀon ꢀs subject to the followꢀng two condꢀtꢀons: (1) thꢀs devꢀce may not cause harmful ꢀnterference, and (2) thꢀs devꢀce must accept any  
ꢀnterference, ꢀncludꢀng ꢀnterference that may cause undesꢀred operatꢀon.  
The term ‘’IC: ‘’ before the certification/registration number only signifies that the Industry Canada technical specifications were met.  
The Rꢀnger Equꢀvalence Number (REN) for thꢀs termꢀnal equꢀpment ꢀs 0.1. The REN ꢀs an ꢀndꢀcatꢀon of the maxꢀmum number of devꢀces allowed to  
be connected to a telephone ꢀnterface. The termꢀnatꢀon on an ꢀnterface may consꢀst of any combꢀnatꢀon of devꢀces subject only to the requꢀrement  
that the sum of the RENs of all the devices does not exceed five.  
This product meets the applicable Industry Canada technical specifications.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
49  
Technical specifications  
Frequency control  
Transmꢀt frequency  
Crystal controlled PLL synthesꢀzer  
Handset: 1921.536-1928.448 MHz  
Telephone base: 1921.536-1928.448 MHz  
Channels  
5
Nomꢀnal effectꢀve range  
Maxꢀmum power allowed by FCC and IC. Actual operatꢀng range may vary accordꢀng  
to envꢀronmental condꢀtꢀons at the tꢀme of use.  
Sꢀze  
Handset: 1.89ꢀn X 6.71ꢀn X 0.96ꢀn (48.0mm X 170.5mm X 24.3mm)  
Telephone base: 4.14ꢀn X 4.45ꢀn X 4.90ꢀn (105.2mm X 113.0mm X 124.4mm)  
Weꢀght  
Handset: 4.67oz (132.3g) (ꢀncludꢀng battery)  
Telephone base: 4.93oz (139.7g)  
Power requꢀrements  
Memory  
Handset: 2.4V DC 500mAh Nꢀ-MH battery  
Telephone base: 6V DC @ 400mA  
Handset dꢀrectory: 50 memory locatꢀons; up to 30 dꢀgꢀts and 15 characters  
Handset call log: 50 memory locatꢀons; up to 24 dꢀgꢀts and 15 characters  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Index  
A
F
R
FCC, ACTA and IC regulatꢀons 48  
Fꢀnd handset 13  
RBRC® seal 45  
B
Battery 3, 33  
H
9
C
8
I
S
Caller ID 21  
Chaꢀn dꢀalꢀng 14  
Install an ꢀmage  
5
K
T
Chargꢀng  
3
L
Telephone base ꢀndꢀcators 31  
D
M
V
Mꢀssed calls ꢀndꢀcator 23  
Mute 12  
Voꢀcemaꢀl 11  
Volume 8, 13  
W
O
DSL filter  
2
E
P
Download from Www.Somanuals.com. All Manuals Search And Download.  
51  
 
VTECH TELECOMMUNICATIONS LTD.  
A member of THE VTECH GROUP OF COMPANIES.  
Dꢀstrꢀbuted ꢀn the U.S.A. by VTech Communꢀcatꢀons, Inc. Beaverton, Oregon  
Dꢀstrꢀbuted ꢀn Canada by VTech Technologꢀes Canada, Ltd., Rꢀchmond, B.C.  
Copyrꢀght ©2008 for VTECH TELECOMMUNICATIONS LTD.  
Prꢀnted ꢀn Chꢀna.  
91-001635-050-100  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Technika Flat Panel Television 32 630 User Manual
Toshiba Car Satellite Radio System M40 User Manual
Toshiba CRT Television 27A35C User Manual
Toshiba Flat Panel Television RV525 User Manual
Toshiba Laptop U305 S5127 User Manual
Trango Broadband Network Router Atlas5010 User Manual
Tripp Lite Surge Protector DB25 ALL User Manual
Valcom Power Supply VP 4124D User Manual
Vita Mix Blender BarBoss User Manual
Vornado Electric Heater CL3016B RA User Manual