VTech Cordless Telephone CS6719 User Manual

to register your product for  
enhanced warranty support and  
latest VTech product news.  
CS6719  
CS6719-15  
CS6719-16  
CS6719-2  
DECT 6.0 cordless telephone  
BC  
User’s manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. Never push objects of any kind into  
this product through the slots in the  
telephone base or handset because  
they may touch dangerous voltage  
points or create a short circuit. Never  
spill liquid of any kind on the product.  
10.To reduce the risk of electric shock,  
do not disassemble this product,  
but take it to an authorized service  
facility. Opening or removing parts of  
the telephone base or handset other  
than specified access doors may  
expose you to dangerous voltages or  
other risks. Incorrect reassembling  
can cause electric shock when the  
product is subsequently used.  
11.Do not overload wall outlets and  
extension cords.  
There is a remote risk of electric  
shock from lightning.  
14.Do not use the telephone to report  
a gas leak in the vicinity of the  
leak. Under certain circumstances,  
a spark may be created when the  
adapter is plugged into the power  
outlet, or when the handset is  
replaced in its cradle. This is a  
common event associated with the  
closing of any electrical circuit. The  
user should not plug the phone  
into a power outlet, and should  
not put a charged handset into  
the cradle, if the phone is located  
in an environment containing  
concentrations of flammable or  
flame-supporting gases, unless there  
is adequate ventilation. A spark in  
such an environment could create a  
fire or explosion. Such environments  
might include: medical use of  
oxygen without adequate ventilation;  
industrial gases (cleaning solvents;  
gasoline vapors; etc.); a leak of  
natural gas; etc.  
12.Unplug this product from the wall  
outlet and refer servicing to an  
authorized service facility under the  
following conditions:  
• When the power supply cord or  
plug is damaged or frayed.  
• If liquid has been spilled onto the  
product.  
• If the product has been exposed  
to rain or water.  
• If the product does not operate  
normally by following the  
15.Only put the handset of your  
telephone next to your ear when it is  
in normal talk mode.  
16.The power adapters are intended to  
be correctly oriented in a vertical or  
floor mount position. The prongs are  
not designed to hold the plug in place  
if it is plugged into a ceiling,  
operating instructions. Adjust only  
those controls that are covered  
by the operation instructions.  
Improper adjustment of other  
under-the-table or cabinet outlet.  
controls may result in damage and  
often requires extensive work by  
an authorized technician to restore  
the product to normal operation.  
• If the product has been dropped  
and the telephone base and/or  
handset has been damaged.  
SAVE THESE INSTRUCTIONS  
Battery  
• CAUTION: Use Only Supplied  
Battery.  
• Do not dispose of the battery in a fire.  
Check with local waste management  
codes for special disposal instructions.  
• Do not open or mutilate the battery.  
Released electrolyte is corrosive and  
• If the product exhibits a distinct  
change in performance.  
13.Avoid using a telephone (other than  
cordless) during an electrical storm.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
may cause burns or injury to the eyes  
or skin. The electrolyte may be toxic if  
swallowed.  
by radio receiving equipment within  
range of the cordless handset. For  
this reason, you should not think of  
cordless telephone conversations as  
being as private as those on corded  
telephones.  
• Exercise care in handling batteries in  
order not to create a short circuit with  
conductive materials.  
• Charge the battery provided with this  
product only in accordance with the  
instructions and limitations specified  
in this manual.  
• Electrical power: The telephone  
base of this cordless telephone must  
be connected to a working electrical  
outlet. The electrical outlet should not  
be controlled by a wall switch. Calls  
cannot be made from the cordless  
handset if the telephone base is  
unplugged, switched off or if the  
electrical power is interrupted.  
• Potential TV interference: Some  
cordless telephones operate  
Precautions for users of  
implanted cardiac pacemakers  
Cardiac pacemakers (applies only to  
digital cordless telephones):  
Wireless Technology Research, LLC  
(WTR), an independent research entity,  
led a multidisciplinary evaluation of the  
interference between portable wireless  
telephones and implanted cardiac  
pacemakers. Supported by the U.S.  
Food and Drug Administration, WTR  
recommends to physicians that:  
at frequencies that may cause  
interference to televisions and  
VCRs. To minimize or prevent  
such interference, do not place  
the telephone base of the cordless  
telephone near or on top of a TV or  
VCR. If interference is experienced,  
moving the cordless telephone farther  
away from the TV or VCR often  
reduces or eliminates the interference.  
• Rechargeable batteries: Exercise  
care in handling batteries in order  
not to create a short circuit with  
conducting material such as rings,  
bracelets and keys. The battery or  
conductor may overheat and cause  
harm. Observe proper polarity  
between the battery and the battery  
charger.  
Pacemaker patients  
• Should keep wireless telephones at  
least six inches from the pacemaker.  
• Should NOT place wireless telephones  
directly over the pacemaker, such as in  
a breast pocket, when it is turned ON.  
• Should use the wireless telephone at  
the ear opposite the pacemaker.  
WTR’s evaluation did not identify any  
risk to bystanders with pacemakers  
from other persons using wireless  
telephones.  
• Nickel-metal hydride rechargeable  
batteries: Dispose of these batteries  
in a safe manner. Do not burn or  
puncture the battery. Like other  
batteries of this type, if burned or  
punctured, they could release caustic  
material which could cause injury.  
About cordless telephones  
• Privacy: The same features that make  
a cordless telephone convenient  
create some limitations. Telephone  
calls are transmitted between the  
telephone base and the cordless  
handset by radio waves, so there is a  
possibility that the cordless telephone  
conversations could be intercepted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
What’s in the box  
Your telephone package contains the  
following items. Save your sales receipt  
and original packaging in case it is  
necessary to ship your telephone for  
warranty service.  
1 set for CS6719-2  
NOTE  
To purchase replacement batteries or  
power adapters, visit our website at  
1 (800) 595-9511. In Canada, go to  
1 (800) 267-7377.  
Important Safety  
Instructions  
Abridged user’s  
manual  
1 set for CS6719/CS6719-2/CS6719-3  
1 set for CS6719/CS6719-15/  
CS6719-16/CS6719-2  
1 set for CS6719/CS6719-15/CS6719-16;  
2 sets for CS6719-2;  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
 
5 –  
Overview  
• Press repeatedly to show other  
dialing options when reviewing a  
caller ID log entry.  
Handset overview  
6 – INT  
• Press to start an intercom  
a
b
p
conversation or transfer a call (for  
multi-handset models only).  
7 – Microphone  
8 –  
o
n
m
• Make or answer a call using the  
handset speakerphone.  
• During a call, press to switch  
between the speakerphone and  
the handset.  
c
d
l
9 – MUTE/DELETE  
k
j
• Mute the microphone during a  
call.  
• Delete digits or characters while  
using the dialing keys.  
• Silence the ringer temporarily  
while the handset is ringing.  
e
f
i
h
g
10 –  
1 – Handset earpiece  
2 – LCD display  
• While you have set the dial mode  
to pulse and on a call, press to  
switch to tone dialing temporarily.  
3 – MENU/SELECT  
11 –  
• Show the menu.  
• Press to add a space when  
entering names.  
• While in a menu, press to select  
an item, or save an entry or  
setting.  
12 – 1  
• Press repeatedly to add or  
remove 1 in front of the caller ID  
log entry before dialing or saving  
it to the directory.  
• Press and hold to set or dial your  
voicemail number.  
4 – OFF/CANCEL  
• Hang up a call.  
• Silence the ringer temporarily  
while the handset is ringing.  
Press and hold to erase the  
missed call indicator while the  
phone is not in use.  
/FLASH  
13 –  
• Press to return to the previous  
menu; or press and hold to return  
to idle mode, without making  
changes.  
• Make or answer a home call.  
• Answer an incoming home call  
when you hear a call waiting  
alert.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
 
14 – REDIAL/PAUSE  
Telephone base overview  
• Press repeatedly to review the  
redial list.  
• Press and hold to insert a dialing  
pause while entering a number.  
d
15 – VOLUME/ /  
• Review the directory when the  
phone is not in use.  
• Increase the listening volume  
during a call.  
• Scroll up while in a menu, or in  
the directory, caller ID log, or  
redial list.  
a
b
c
• Move the cursor to the right when  
entering numbers or names.  
1 – IN USE light  
VOLUME/ /CID  
• Review the caller ID log when the  
phone is not in use.  
• Decrease the listening volume  
during a call.  
• Flashes when there is an incoming  
call, or another telephone sharing  
the same line is in use.  
• On when the handset is in use.  
• Scroll down while in a menu, or  
in the directory, caller ID log, or  
redial list.  
• Move the cursor to the left when  
entering numbers or names.  
2 – /FIND HANDSET  
• Press to page all system  
handsets.  
3 – Charging pole  
4 – Charge light  
16 – CHARGE light  
• On when the handset is  
charging.  
Charger overview  
a
1 – Charging pole  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
 
Display icons overview  
Handset and Telephone base  
lights overview  
The battery icon flashes  
Handset lights  
when the battery is low  
and needs charging.  
On when the handset  
speakerphone is in  
use.  
The battery icon animates  
when the battery is  
charging.  
CHARGE  
On when the handset  
is charging in the  
telephone base or  
handset charger.  
The battery icon becomes  
solid when the battery is  
fully charged.  
The handset ringer is off.  
Telephone base lights  
IN USE  
On when the telephone  
line is in use.  
There are new voicemail  
received from your  
telephone service  
provider.  
On when you are  
registering a handset.  
Flashes quickly when  
there is an incoming  
call.  
ECO  
NEW  
The ECO mode activates  
automatically to reduce  
power consumption when  
the handset is within  
range from the telephone  
base.  
Flashes when another  
telephone sharing the  
same line is in use.  
Flashes when you  
are deregistering all  
handsets.  
There are new caller ID  
log entries.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
 
Mount the telephone base  
Connect  
The telephone comes ready for tabletop  
use. If you have already installed the  
telephone for tabletop use, unplug the  
telephone line cord from the telephone  
wall jack, and unplug the telephone base  
power adapter from the wall outlet before  
mounting your telephone on a wall.  
Follow the steps below to mount your  
telephone on a wall.  
You can choose to connect the telephone  
base for desktop usage or wall mounting.  
NOTES  
• Use only the power adapters supplied with  
this product.  
• Make sure the electrical outlets are not  
controlled by wall switches.  
• The adapters are intended to be correctly  
oriented in a vertical or floor mount  
position. The prongs are not designed to  
hold the plug in place if it is plugged into a  
ceiling, under-the-table or cabinet outlet.  
1. Route the telephone line cord  
through the rectangular hole on the  
wall mount bracket. Then plug the  
two ends of the telephone line cord  
into the telephone base and the wall  
outlet as shown.  
TIP  
• If you subscribe to digital subscriber line  
(DSL) high-speed Internet service through  
your telephone line, make sure you install  
a DSL filter (not included) between the  
telephone line cord and telephone wall  
jack. Contact your DSL service provider  
for more information.  
Connect the telephone base  
2 Align the holes on the bracket with  
the standard wall plate and slide the  
bracket down until it clicks securely in  
place.  
Connect the charger  
A
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
 
3. Align the grooves on the telephone  
base with the tabs on the wall mount  
bracket, and then slide it down until it  
clicks securely in place.  
Install and charge the battery  
Install the battery as shown below.  
NOTES  
• Use only supplied battery.  
• If the handset will not be used for a long  
time, disconnect and remove the battery to  
prevent possible leakage.  
4. Connect the power adapter to the  
telephone base and an electrical  
outlet not controlled by a wall switch.  
THIS SIDE UP  
THIS SIDE UP  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
 
When it is fully charged, you can expect  
the following performance:  
Charge the battery  
Place the handset in the telephone base  
or the charger to charge.  
Operation  
Operating time  
While in handset  
use (talking*)  
Seven hours  
While in  
speakerphone  
mode (talking*)  
Three hours  
Five days  
While not in use  
(standby**)  
* Operating times vary depending on your actual  
use and the age of the battery.  
** Handset is not charging or in use.  
Once you have installed the battery,  
the handset LCD display indicates the  
battery status (see the table below).  
NOTES  
• For best performance, keep the handset in  
the telephone base or charger when not  
in use.  
• The battery is fully charged after 12 hours  
of continuous charging.  
• If you place the handset in the telephone  
base or the charger without plugging  
in the battery, the screen displays  
No battery.  
Battery  
indicators  
Battery  
status  
Action  
The screen  
is blank, or  
shows Put  
in charger  
and  
The battery  
has no  
Charge  
without  
charge or  
very little  
charge. The  
handset  
interruption  
(at least 30  
minutes).  
flashes.  
cannot be  
used.  
The screen  
The battery  
has enough  
Charge  
shows Low  
without  
battery and charge to be  
flashes.  
interruption  
(at least 30  
minutes).  
used for a  
short time.  
The screen  
shows  
HANDSET X.  
The battery is To keep  
charged.  
the battery  
charged,  
place it in the  
telephone  
base or  
charger when  
not in use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
 
Operating range  
Before use  
This cordless telephone operates with  
the maximum power allowed by the  
Federal Communications Commission  
(FCC). Even so, this handset and  
telephone base can communicate over  
only a certain distance - which can  
vary with the locations of the telephone  
base and handset, the weather, and the  
layout of your home or office.  
After you install your telephone or  
power returns following a power outage,  
the handset will prompt you to set the  
date and time.  
Set date and time  
1. Use the dialing keys (0-9) to enter  
the month (MM), date (DD) and year  
(YY). Then press SELECT.  
When the handset is out of range, the  
handset displays Out of range or no pwr  
at base.  
2. Use the dialing keys (0-9) to enter the  
hour (HH) and minute (MM). Then  
press or to choose AM or PM.  
If there is a call while the handset is  
out of range, it may not ring, or if it  
does ring, the call may not connect well  
when you press . Move closer to the  
telephone base, and then press  
to answer the call. If the handset  
moves out of range during a telephone  
conversation, there may be interference.  
To improve reception, move closer to the  
telephone base.  
3. Press SELECT to save.  
Check for dial tone  
Press . If you hear a dial tone, the  
installation is successful.  
If you do not hear a dial tone:  
• Make sure the installation procedures  
described above are properly done.  
• It may be a wiring problem. If you  
have changed your telephone  
service to digital service from a  
cable company or a VoIP service  
provider, the telephone line may need  
to be rewired to allow all existing  
telephone jacks to work. Contact your  
cable/VoIP service provider for more  
information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
 
Set date and time  
1. Press MENU when the handset is not  
Configure your telephone  
Using the handset menu  
in use.  
1. Press MENU when the phone is not  
2. Press or to highlight Set date/time,  
in use.  
and then press SELECT.  
2. Press or until the screen displays  
the desired feature menu.  
3. Use the dialing keys (0-9) to enter  
the month (MM), date (DD) and year  
(YY). Then press SELECT.  
3. Press SELECT to enter that menu.  
4. Use the dialing keys (0-9) to enter the  
hour (HH) and minute (MM). Then  
press or to choose AM or PM.  
• To return to the previous menu, press  
CANCEL on the handset.  
• To return to idle mode, press and hold  
5. Press SELECT to save.  
CANCEL on the handset.  
Set language  
The LCD language is preset to English.  
You can select English, French or  
Spanish to be used in all screen displays.  
1. Press MENU when the handset is not  
in use.  
2. Press or to highlight Settings,  
and then press SELECT.  
3. Press SELECT to select  
LCD language.  
4. Press or to highlight English,  
Français or Español, and then press  
SELECT.  
• The screen displays Set English?  
when you choose English.  
• The screen displays Set Français?  
when you choose Français.  
• The screen displays Set Español?  
when you choose Español.  
5. Press SELECT to save your  
selection. You hear a confirmation  
tone  
NOTE  
• If you accidentally changed the LCD  
language to French or Spanish, you can  
reset it to English  
easily by pressing  
MENU and then entering 364  
.
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
 
Home area code  
Dial mode  
If you dial your local calls using only  
seven digits (area code not required),  
you can program your home area code  
so that when you receive a call within  
your local area, the telephone number  
is automatically stored without the area  
code in the caller ID log.  
The dial mode is preset to touch-tone  
dialing. If you have pulse (rotary)  
service, you must change the dial  
mode to pulse dialing before using the  
telephone to make a call.  
1. Press MENU when the phone is not  
in use.  
1. Press MENU when the phone is not  
2. Press or to highlight Settings,  
in use.  
and then press SELECT.  
2. Press or to highlight Settings,  
3. Press or to highlight Dial mode,  
and then press SELECT.  
and then press SELECT.  
3. Press or to highlight Home area  
4. Press or to choose Touch-tone  
code, and then press SELECT.  
or Pulse.  
4. Use the dialing keys to enter a  
three-digit home area code.  
5. Press SELECT to save your  
selection. Then the handset returns  
to the previous menu. You hear a  
confirmation tone.  
5. Press SELECT to save your  
selection. Then the handset returns  
to the previous menu. You hear a  
confirmation tone.  
Temporary tone dialing  
NOTE  
If you have pulse (rotary) service only,  
you can switch from pulse to touch-tone  
dialing temporarily during a call. This  
is useful if you need to send touch-  
tone signals to access your telephone  
banking or long distance services.  
• If, in the future, your telephone service  
provider requires you to dial the area code  
when making a local call, or, if you move to  
a location that requires it, delete the home  
area code you have already programmed,  
following the steps above. After you have  
deleted the home area code, _ _ _ will  
appear on the display.  
1. During a call, press  
.
2. Use the dialing keys to enter the  
number you wish to dial.  
3. The telephone sends touch-tone  
signals. The telephone automatically  
returns to pulse dialing mode after  
you end the call.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
 
Make a call  
Telephone Operations  
1. Press  
or on the handset.  
2. When you hear a dial tone, dial the  
number.  
Handset control key panel:  
• The handset displays Unable to  
call if the telephone line is in use.  
NOTES  
The handset shows the elapsed time as  
you talk (in hours, minutes and seconds).  
While entering numbers, press and hold  
PAUSE to insert a dialing pause  
(a p appears).  
Predial a call  
1. Enter the telephone number.  
2. Press  
or to dial.  
NOTES  
The handset displays Unable to call if  
the telephone line is in use.  
The handset shows the elapsed time as  
you talk (in hours, minutes and seconds).  
While entering numbers, press DELETE  
or CANCEL to make corrections;  
press and hold PAUSE to insert a dialing  
pause (a p appears).  
Answer a call  
Press  
, or  
,
, or any dialing key (0-9,  
) to answer.  
End a call  
Press OFF on the handset, or place the  
handset in the telephone base or  
handset charger.  
Speakerphone  
When the handset is on a call, press  
to switch between the speakerphone  
and the handset earpiece. When the  
speakerphone is active, the handset  
displays Speaker.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
 
charger to exit the call. The call  
continues on the other handset until  
both handsets hang up.  
Volume control  
During a call, press /VOLUME/ .  
If this is a cell call and the volume is too  
loud or quiet, try changing the volume  
on your cell phone. On some cell  
phones, changing the volume on the  
cell phone affects your cell call volume  
on the CS6719 handset.  
NOTE  
If you have paired a DECT 6.0 cordless  
headset and speakerphone to the telephone  
base, you can also join a call in progress  
using the paired device. Refer to the user’s  
manuals of the respective product for more  
information.  
NOTES  
The handset and speakerphone volume  
settings are independent.  
Call waiting  
When the volume reaches the minimum  
or maximum setting, you hear two beeps.  
When you subscribe to call waiting  
service with your telephone service  
provider, the handset flashes and you  
hear a beep if someone calls while you  
are already on a call.  
Mute  
The mute function allows you to hear  
the other party but the  
other party cannot hear you.  
• Press FLASH on the handset to put  
your current call on hold and take the  
new call.  
• Press FLASH on the handset at any  
time to switch back and forth  
between calls.  
• During a call, press MUTE. The  
handset displays Muted until the  
mute function is turned off.  
• Press MUTE again to resume the  
conversation. The handset briefly  
displays Microphone on.  
Chain dialing  
Use this feature to initiate a dialing  
sequence from numbers stored in the  
directory, caller ID log or redial list while  
you are on a call.  
Join a call in progress (for  
multiple handset models only)  
Another handset can join you on a  
home call. That call continues until  
all parties hang up. You can share an  
outside call with up to two handsets at  
the same time.  
You can buy additional expansion  
handsets (CS6709) for this telephone  
base. You can register up to five devices  
to the telephone base.  
Chain dialing can be useful if you wish  
to access other numbers (such as bank  
account numbers or access codes)  
from the directory, caller ID log or  
redial list.  
To access a number from the  
directory while on a call:  
1. Press MENU.  
To join a call:  
2. Press SELECT to select Directory.  
• When a handset is already on a call,  
3. Press or to scroll to the desired  
entry.  
press  
or on another handset to  
join the call.  
4. Press SELECT to dial the displayed  
• Press OFF or place the handset  
in the telephone base or handset  
number.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
 
To access a number from the  
caller ID log while on a call:  
1. Press MENU.  
Transfer a call  
While on an outside call, you can  
transfer the call from one handset to  
another.  
2. Press or to highlight Caller ID  
log, and then press SELECT.  
1. During a call, press MENU.  
3. Press or to scroll to the desired  
entry.  
2. Press or to scroll to Transfer,  
then press SELECT.  
4. Press SELECT to dial the displayed  
• If you have two handsets, your  
handset displays Calling HS X and  
then Transferred.  
number.  
To access a number from the  
redial list while on a call:  
1. Press REDIAL to enter the redial list.  
• If you have three or more  
handsets, your handset  
displays Transfer to: Use the  
dialing keys to select a destination  
handset.Your handset displays  
Calling HS X  
2. Press  
,
, or REDIAL repeatedly to  
browse to the desired entry.  
3. Press SELECT to dial the displayed  
number.  
and then Transferred.  
The destination handset rings and its  
screen displays Incoming call.  
Find handset  
This feature helps you find misplaced  
handsets.  
3. To answer on the destination handset,  
press  
,
, or any dialing key  
(0-9,  
handset.  
, or ) on the destination  
To start the paging tone:  
• Press /FIND HANDSET on the  
telephone base.  
NOTES  
All idle handsets ring and their  
screens display ** Paging **.  
If the destination handset does not answer  
the call within 30 seconds, the call will  
be reverted to the originating handset. If  
To stop the paging tone:  
• Press , OFF, or any dialing key  
you do not press  
,
, or any dialing  
key (0-9,  
, or  
) on your handset  
to reconnect the outside call within 30  
seconds, the call ends automatically.  
(0-9,  
, or  
) on a handset.  
If the destination handset is in the directory  
or caller ID log, or is out of range, the  
originating handset displays Unable to  
call and then reconnects to the outside  
call.  
Intercom  
Use the intercom feature for  
conversations between two handsets.  
You can buy additional expansion  
handsets (CS6709) for this telephone  
base.You can register up to five  
handsets to the telephone base.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
 
1. Press INT on your handset when not  
Answer an incoming call during  
an intercom call  
When you receive an outside call during  
an intercom call, there is an alert tone.  
in use.  
• If you have only one handset, your  
handset displays INT needs 2 HS.  
• If you have two handsets, your  
• To answer the outside call, press  
.
handset displays Calling HS X.  
The intercom call ends automatically.  
• If you have three or more  
• To end the intercom call without  
answering the outside call, press  
OFF. The telephone continues to  
ring.  
handsets, your handset displays  
Intercom to. Use the dialing keys  
to enter a destination handset.Your  
handset displays Calling HS X.  
The destination handset rings and its  
screen displays HS X is calling.  
Call transfer using intercom  
Use the intercom feature to transfer an  
outside call to another system handset.  
2. To answer the intercom call, press  
,
, INT or any dialing key (0-9,  
1. During a call, press INT.  
, or  
) on the destination handset.  
Both handsets now display Intercom.  
• If you have two handsets, the  
outside call is put on hold and your  
handset displays Calling HS X.  
3. To end the intercom call, press OFF  
or place the handset back in the  
telephone base or charger. Both  
handsets now display Intercom  
ended.  
• If you have three or more  
handsets, your handset displays  
Intercom to. Use the dialing keys  
to enter a handset number. The  
outside call is put on hold and your  
handset displays Calling HS X.  
NOTES  
You can cancel the intercom call before it is  
answered by pressing OFF or INT on the  
originating handset.  
The destination handset rings and its  
screen displays HS X is calling.  
If the destination handset does not answer  
the intercom call within 100 seconds, is on  
a call or out of range, the originating  
handset displays Unable to call and  
returns to idle mode.  
2. To answer the intercom call on the  
destination handset, press  
,
, INT  
or any dialing key (0-9,  
, or  
).  
The outside call is still on hold and both  
handsets now display Intercom. You  
can now have a private conversation  
with the destination handset.  
Press OFF or MUTE on the destination  
handset to temporarily silence the intercom  
ringer.  
You can use four handsets on two pairs  
of intercom calls. For example, when four  
handsets are used on two pairs of intercom  
calls, use the fifth handset for an outside call.  
NOTES  
To cancel the intercom call before it is  
answered, press OFF, or INT on your  
handset.  
If there is an incoming call while the  
originating handset displays Calling HS X,  
the intercom request will be stopped and  
the screen displays Incoming call.  
• If the destination handset does not  
answer within 100 seconds, is in use, on  
a call or is out of range, the originating  
handset displays Unable to call and then  
reconnects to the outside call.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
 
3. From this intercom call, you have the  
following options:  
Redial list  
Each handset stores the last 10  
telephone numbers dialed (up to 30  
digits). When there are already 10  
entries, the oldest entry is deleted to  
make room for the new entry.  
You can let the destination handset  
join you on the outside call in  
a three-way conversation.  
Press and hold INT on the  
originating handset.  
You can transfer the call. Press  
OFF, or place your handset back in  
the telephone base or charger.Your  
handset displays Transferred.  
The destination handset is then  
connected to the outside call.  
Review a redial list entry  
1. Press REDIAL to enter the redial list.  
2. Press  
,
, or REDIAL repeatedly  
to browse until the desired entry  
displays.  
You can press INT to switch  
between the outside call (Outside  
call displays) and the intercom call  
(Intercom displays).  
Dial a redial list entry  
1. Press REDIAL to enter the redial list.  
2. Press  
,
, or REDIAL repeatedly  
to browse until the desired entry  
displays.  
• The destination handset can end  
the intercom call by pressing OFF,  
or by placing the handset back  
in the telephone base or charger.  
The outside call continues with the  
original system handset.  
3. Press  
or to dial.  
-OR-  
1. Press  
or to take the line.  
2. Press REDIAL to enter the redial list.  
3. Press , or REDIAL repeatedly  
,
to browse until the desired entry  
displays.  
4. Press SELECT to dial the displayed  
number.  
Delete a redial list entry  
1. Press REDIAL to enter the redial list.  
2. Press  
,
, or REDIAL repeatedly  
to browse until the desired entry  
displays.  
• When the handset displays the number  
you want to delete, press DELETE.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
 
6. When Enter name displays, use  
the dialing keys to enter a name (up  
to 15 characters). Each time you  
press a key, the character on that  
key appears. Additional key presses  
produce other characters on that key.  
Press the key repeatedly until the  
desired character appears. The first  
character of every word is capitalized.  
Directory  
The directory can store up to 50 entries,  
which are shared by all handsets.  
Each entry may consist of a telephone  
number up to 30 digits, and a name up  
to 15 characters.  
Each handset directory is independent  
(for multiple handset models only). Any  
additions, deletions or edits made on  
one handset are not reflected on other  
handsets.  
7. Press SELECT to save. You hear  
a confirmation tone and then the  
handset returns to the previous  
menu.  
If the telephone number in the directory  
exceeds 15 digits, a dash appears after  
the 14th digit and then the remaining  
digits are shown beginning with a dash  
alternately.  
-OR-  
1. Use the dialing keys to enter a  
number (up to 30 digits) when the  
phone is not in use. Press SELECT.  
The handset displays Enter number.  
-OR-  
Add a directory entry  
Copy a number from the redial list by  
1. Press MENU when the phone is not  
pressing REDIAL. Then press  
,
in use.  
, or REDIAL repeatedly to find the  
desired number. Press SELECT for  
three times to copy the number.  
2. Press or to highlight Directory,  
and then press SELECT.  
3. Press SELECT to choose  
2. Press SELECT to move on to the  
Add contact.  
name.  
4. When Enter number displays, use  
the dialing keys to enter a number  
(up to 30 digits).  
3. When Enter name displays, use  
the dialing keys to enter a name (up  
to 15 characters). Each time you  
press a key, the character on that  
key appears. Additional key presses  
produce other characters on that key.  
Press the key repeatedly until the  
desired character appears. The first  
character of every  
-OR-  
Copy a number from the redial list  
by pressing REDIAL. Then press  
,
, or REDIAL repeatedly to find the  
desired number. Press SELECT to  
copy the number.  
word is capitalized.  
5. Press SELECT to move on to the  
name.  
4. Press SELECT to save. The handset  
displays Saved and then returns  
to the previous menu. You hear a  
confirmation tone.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
 
While entering names and numbers,  
you can:  
-OR-  
i. Press MENU when the phone is  
not in use.  
• Press or to move the cursor to  
the left or right.  
ii. Press or to highlight  
Directory, and then press  
SELECT.  
• Press DELETE to erase a digit.  
• Press and hold DELETE to erase  
iii. Press or to highlight Review,  
all digits.  
and then press SELECT.  
• Press and hold PAUSE to enter a  
2. Use the dialing keys to enter the  
letter associated with the name.  
For example, if you have entries for  
Jenny, Jessie, Kristen and Laura in  
your directory, press 5 (JKL) once  
to see Jenny (when Jenny displays,  
press to see Jessie), twice to see  
Kristen, or three times to see Laura.  
If there is no name entry matching  
your search, the next closest match  
in alphabetical order appears. If  
necessary, press or to browse.  
dialing pause (a p appears).  
• Press 0 to add a space.  
Review directory entries  
Directory entries appear alphabetically.  
1. Press  
when the phone is not in  
use. The handset displays Entries  
in DIR X for a few seconds, and  
then displays the first entry in the  
directory.  
2. Press or to browse through the  
directory.  
Delete a directory entry  
-OR-  
1. Search for the desired entry in the  
directory (see Review and dial  
from the directory or Alphabetical  
search).  
1. Press MENU when the phone is not  
in use.  
2. Press or to highlight Directory,  
and then press SELECT.  
2. When the desired entry appears,  
press DELETE. The screen displays  
Delete contact? and the number.  
3. Press or to highlight Review, and  
then press SELECT.  
4. The handset displays Entries in  
DIR X for a few seconds and then  
displays the first directory entry.  
Press or to browse through the  
directory.  
3. Press SELECT to confirm. The  
screen displays Deleting ... and  
then Contact deleted. You hear a  
confirmation tone.  
NOTE  
Dial a directory entry  
• If the telephone number in the directory  
exceeds 15 digits, - appears in front of the  
telephone number and shows the remaining  
numbers alternately.  
1. Search for the desired entry in the  
directory (see Review directory  
entries or Alphabetical search).  
2. Press  
or to dial.  
Alphabetical search  
1. Press  
use.  
when the phone is not in  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
 
Speed dial  
Reassign a speed dial entry  
You can copy up to 9 directory entries  
into the speed dial locations (0 and  
2-9) so that you can dial these numbers  
using fewer keys than usual.  
1. Press MENU when the phone is not  
in use.  
2. Press or to scroll to Directory,  
then press SELECT.  
The speed dial memory locations are  
stored in the telephone base and are  
shared by all handsets. Changes made  
to the speed dial entries on one handset  
apply to all.  
3. Press or to scroll to Speed dial,  
then press SELECT.  
4. Press or , or use the dialing keys  
to choose the speed dial location you  
want to reassign.  
5. Press SELECT twice. The screen  
Assign a speed dial entry  
1. Press MENU when the phone is not  
displays Reassign SD.  
6. Press SELECT. The screen displays  
Copy from DIR... and then the first  
entry of the directory.  
in use.  
2. Press or to scroll to Directory,  
then press SELECT.  
7. Press or to browse to the desired  
entry.  
3. Press or to scroll to Speed dial,  
then press SELECT.  
-OR-  
4. Press or or the dialing keys (0 or  
2-9) to choose the desired speed dial  
location.  
Use the alphabetical search to find  
the desired entry.  
8. Press SELECT to save. You hear  
a confirmation. The name (up to 12  
characters) appears in the selected  
speed dial location.  
5. Press SELECT. The screen displays  
Copy from DIR... and then the first  
entry in the directory.  
6. Press or to browse to the desired  
entry.  
Dial a speed dial number  
• Press and hold a dialing key (0 or  
2-9) to dial the number stored in the  
corresponding speed dial location.  
-OR-  
Use the alphabetical search to find the  
desired entry.  
7. Press SELECT to save. You hear  
a confirmation. The name (up to 12  
characters) appears in the selected  
speed dial location.  
When the speed dial location is empty,  
the screen displays the speed dial list.  
See Assign a speed dial entry to add a  
new entry.  
NOTES  
• If the directory is empty, when you press  
SELECT in Step 5, the screen displays  
Directory empty.  
• If the speed dial location you selected is  
occupied, the new directory entry you  
selected replaces the old one.Take caution  
not to replace entries you do not wish to  
delete from the speed dial locations.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
 
Delete a speed dial entry  
1. Press MENU when the phone is not  
Caller ID  
If you subscribe to caller ID service,  
information about each caller appears  
after the first or second ring. If  
you answer a call before the caller  
information appears on the screen, it  
will not be saved in the caller ID log.  
in use.  
2. Press or to scroll to Directory,  
then press SELECT.  
3. Press or to scroll to Speed dial,  
then press SELECT.  
The caller ID log stores up to 50 entries.  
Each entry has up to 24 digits for the phone  
number and 15 characters for the name.  
4. Press or , or use the dialing keys  
to choose the desired speed dial  
location, then press DELETE. The  
screen displays Clear SD #X?  
If the telephone number has more that  
15 digits, only the last 15 digits appear.  
5. Press SELECT to confirm. You hear  
a confirmation tone.  
If the name has more than 15 characters,  
only the first 15 characters are shown  
and saved in the caller ID log.  
NOTE  
• Deleting the speed dial entries does not  
affect the entries in the directory.  
Entries appear in reverse chronological  
order. When the caller ID log is full, the  
oldest entry is deleted to make room for  
new incoming call information.  
Caller ID log entries are shared by all  
system handsets (for multiple handset  
models only). Any deletions made on  
one handset are reflected on all other  
handsets.  
NOTE  
• This product can provide information  
only if both you and the caller are in  
areas offering caller ID service and if  
both telephone service providers use  
compatible equipment. The time and  
date are sent by your telephone service  
provider along with the call information.  
Review the caller ID log  
Review the caller ID log to find out who  
called, to return the call, or to copy the  
caller’s name and number into your  
directory.  
1. Press CID when the phone is not in  
use. The handset displays the first  
entry in the caller ID log.  
2. Press or to browse.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
 
-OR-  
If you do not want to review the missed  
calls one by one, press and hold  
CANCEL on the handset when not in  
use to clear the missed call indicator. All  
the entries are then considered old and  
kept in the caller ID log.  
1. Press MENU when the phone is not  
in use.  
2. Press or to scroll to Caller ID  
log, and then press SELECT twice  
to choose Review. The handset  
displays the first entry in the caller ID  
log.  
View dialing options  
Although the caller ID log entries  
received have 10 digits (the area code  
plus the seven-digit number), in some  
areas, you may need to dial only the  
seven digits, or 1 plus the seven digits,  
or 1 plus the area code plus the seven  
digits. You can change the number of  
digits that you dial from the caller ID  
log and store the new number to the  
directory.  
3. Press or to browse.  
NOTE  
• You hear a double beep when you reach  
the beginning or end of the caller ID log.  
Memory match  
If the incoming telephone number  
matches the last seven digits of a  
telephone number in your directory,  
the name that appears on the screen  
matches the corresponding name in  
your directory.  
While reviewing the caller ID log, press  
(pound key) repeatedly to display  
different dialing options for local and  
long distance numbers before dialing  
or saving the telephone number in the  
directory.  
For example, if Linda Jones Smith calls,  
his name appears as Linda if this is  
how you entered it into your directory.  
NOTE  
Press 1 repeatedly if you need to add  
or remove 1 in front of the telephone  
number before dialing or saving it in  
the directory.  
The number shown in the caller ID log will be  
in the format sent by the telephone service  
provider. The telephone service provider  
usually delivers 10-digit phone numbers  
(area code plus telephone number). If the  
phone number of the caller does not match  
a number in your directory, the name will  
appear as it is delivered by the telephone  
service provider.  
When the number is displayed in  
the correct format for dialing, press  
or to dial.  
Dial a caller ID log entry  
Missed call indicator  
1. Search for the desired caller ID log  
When there are calls that have not  
been reviewed in the caller ID log, the  
handsets display XX missed calls.  
entry (see Review the Caller ID log).  
2. When the desired entry displays,  
press  
or to dial.  
Each time you review a caller ID log  
entry marked NEW, the number of  
missed calls decreases by one.  
When you have reviewed all the  
missed calls, the missed call indicator  
goes away.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
 
To delete all entries:  
1. Press MENU when the phone is not  
Save a caller ID log entry to the  
directory  
1. Search for the desired caller ID log  
in use.  
2. Press or to scroll to Caller ID  
log, and then  
entry (see Review the Caller ID log).  
2. When the desired entry displays,  
press SELECT.  
press SELECT.  
3. Press or to scroll to Del all calls,  
3. Press SELECT to choose To  
Directory. Then the handset displays  
Enter number.  
and then press SELECT.  
4. When the screen shows Delete all?  
Press SELECT to confirm. The  
screen displays Deleting... and then  
you hear a confirmation tone.  
4. Use the dialing keys to edit the  
number, when necessary. Press  
SELECT to move to the name. The  
handset displays Enter name.  
5. Use the dialing keys to add or edit the  
name.  
Sound settings  
Key tone  
6. Press SELECT when done and the  
screen shows Saved.  
You can turn the key tone on or off for  
each handset. If you turn the key tone  
off, there are no beeps when you press  
the handset keys.  
While entering names and numbers,  
you can:  
• Press or to move the cursor to  
the left or right.  
1. Press MENU when the handset is not  
in use.  
• Press DELETE to erase a digit.  
2. Press or to highlight Settings,  
• Press and hold DELETE to erase  
and then press SELECT.  
all digits.  
3. Press or to highlight Key tone,  
• Press and hold PAUSE to enter a  
and then press SELECT.  
dialing pause (a p appears).  
4. Press or to highlight Key tone:On  
• Press 0 to add a space.  
or Key tone:Off.  
NOTE  
5. Press SELECT to save your  
selection. Then the handset returns  
to the previous menu. You hear a  
confirmation tone.  
• If you save an entry which already exists  
in the directory, the handset displays  
Number repeated and then returns to  
previous screen.  
Delete the caller ID log entries  
Ringer tone  
1. Search for the desired caller ID log  
You can choose from different ringer  
tones for each handset.  
entry (see Review the Caller ID log).  
2. Press DELETE to delete the  
1. Press MENU when the handset is not  
displayed entry.  
in use.  
2. Press or to highlight Ringers,  
and then press SELECT.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
 
3. Press or to highlight Ringer  
tone, and then press SELECT.  
To silence the handset ringer:  
4. Press or to sample each ringer  
tone.  
• Press OFF or MUTE on the handset  
and it displays Ringer muted and  
.
5. Press SELECT to save your  
selection. Then the handset returns  
to the previous menu. You hear a  
confirmation tone.  
NOTES  
Each handset and the base ring when  
there is an incoming call unless the ringer  
volume of that device is turned off.  
NOTE  
Quiet mode  
• If you turn off the ringer volume, you will  
not hear ringer tone samples.  
You can turn on the quiet mode for a  
period of time (1-12 hours). During this  
period, all tones (except paging tone)  
are muted.  
Handset ringer volume  
You can set the ringer volume or turn  
the ringer off on each handset. When  
1. Press and hold  
) when the  
the ringer is off,  
screen.  
appears on the  
handset is not in use.  
2. The handset displays Quiet: _ _  
hours. Use the dialing keys (0-9) to  
enter the desired duration (1-12).  
1. Press MENU when the handset is not  
in use.  
2. Press or to highlight Ringers,  
3. Press SELECT to save. You hear a  
confirmation tone.  
and then press SELECT.  
3. Press or to select Ringer  
The handset displays Quiet mode on  
volume, and then press SELECT.  
and  
.
4. Press or to sample each volume  
level.  
To turn off the quiet mode:  
Press and hold  
when the handset  
5. Press SELECT to save your  
selection. Then the handset returns  
to the previous menu. You hear a  
confirmation tone.  
is not in use. The handset displays Quiet  
mode off briefly and then returns to idle.  
NOTE  
• When you change the settings of the ringer  
tone or ringer volume, you can still hear  
the samples even if the quiet mode is on.  
NOTE  
• The ringer volume also determines the  
ringer volume for intercom calls. If the  
ringer volume is set to off, that handset  
is silenced for all incoming calls except  
paging tone.  
Temporary ringer silencing  
When the telephone is ringing, you can  
temporarily silence the ringer of the  
handset without disconnecting the call.  
The next call rings normally at the preset  
volume.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
 
Retrieve voicemail from  
telephone service  
Expand your telephone  
system  
Voicemail is a feature available from  
most telephone service providers. It  
may be included with your telephone  
service, or may be optional. Fees may  
apply.  
You can add new handsets (CS6709,  
purchased separately) to your telephone  
system. Your telephone base supports a  
maximum of five handsets.  
For more details, refer to the user’s  
manual that comes with your CS6709  
new handset.  
Retrieve voicemail  
When you received a voicemail, the  
handset displays New voicemail  
and  
.
To retrieve, you typically dial an access  
number provided by your telephone  
service provider, and then enter a  
security code. Contact your telephone  
service provider for instructions on how  
to configure the voicemail settings and  
listen to messages.  
Turn off the new voicemail  
indicators  
If you have retrieved your voicemail  
while away from home, and the  
handset still displays the new voicemail  
indicators, use this feature to turn off the  
indicators.  
NOTE  
• This feature turns off the indicators only, it  
does not delete your voicemail messages.  
1. Press MENU when the handset is not  
in use.  
2. Press or to highlight Settings,  
and then press SELECT.  
3. Press or to highlight Clr  
voicemail, and then press SELECT.  
The handset displays Reset VM  
icon?.  
4. Press SELECT to save your  
selection. You hear a confirmation  
tone.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
 
Screen messages  
A system handset or  
another telephone on  
the same line is  
in use.  
Line in use  
Low battery  
There are no caller ID  
log entries.  
Call log  
empty  
The battery needs to  
be recharged.  
You are calling  
another handset (for  
intercom calls).  
Calling HS X  
(for models with two  
or more  
MUTE is turned off  
and the person on the  
other end can hear  
you.  
Microphone  
on  
handsets only)  
A directory entry is  
deleted.  
Contact  
deleted  
You have turned  
off the handset  
microphone. The  
other party cannot  
hear you but you can  
hear the other party.  
Muted  
There are no directory  
entries.  
Directory  
empty  
The directory is full.  
You cannot save any  
new entry unless you  
delete some current  
entries.  
Directory  
full  
There are new  
New  
voicemail  
voicemail message(s)  
from your telephone  
service provider.  
You have just ended  
a call.  
Ended  
You place the handset  
in the telephone base  
or charger without  
installing a battery  
in it.  
No battery  
The handset  
registration is not  
successful.  
Failed  
Another handset is  
calling (for intercom  
calls).  
HS X is  
calling  
(for models with two  
or more handsets  
only)  
There is no telephone  
line connected.  
No line  
Another handset  
is already in the  
directory or caller ID  
log.  
Not  
available  
There is an incoming  
call.  
Incoming  
call  
Two handsets are  
required for an  
intercom call.  
The telephone  
INT needs 2  
HS  
Number  
number you have  
entered is already  
stored in the directory.  
repeated  
The handset is on an  
intercom call.  
Intercom  
The telephone base  
has lost power, or  
the handset is out of  
range.  
Out of range  
or no pwr at  
base  
The intercom call has  
just ended.  
Intercom  
ended  
You have started the  
intercom process or  
started transferring a  
call, and need to enter  
the desired handset  
number.  
The handset is on a  
call.  
Intercom to  
Phone  
(for models with  
three or more  
handsets only)  
The battery is very  
low. Put the handset  
in the telephone  
base or charger for  
recharging.  
Put in  
charger  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
 
Frequently asked  
questions  
Below are the questions most frequently  
asked about the cordless telephone.  
If you cannot find the answer to your  
question, visit our website at  
The quiet mode is  
turned off.  
Quiet mode  
off  
The quiet mode is  
turned on.  
Quiet mode  
on  
The handset  
registration is in  
progress.  
Registering...  
The handset ringer  
is muted temporarily  
during an incoming  
call.  
Ringer muted  
1 (800) 595-9511 for customer service.  
My telephone Make sure the telephone  
does not work base is installed properly,  
at all.  
and battery is installed  
and charged correctly.  
For optimum daily  
The handset ringer is  
turned off.  
Ringer off  
Saved  
Your selection has  
been saved.  
performance, return the  
handset to the telephone  
base after use.  
The handset  
speakerphone is in  
use.  
Speaker  
The display  
shows No  
line. I cannot  
hear the dial  
tone.  
Disconnect the telephone  
line cord from your  
telephone and connect  
it to another telephone.  
If there is no dial tone  
on that other telephone  
either, then the telephone  
line cord may be defective.  
Try installing a new  
Screen display on  
a non-registered  
handset.  
To register  
HS...  
...see manual  
You have transferred  
an outside call to  
another cordless  
handset.  
Transferred  
telephone line cord.  
If changing telephone line  
cord does not help, the  
wall jack (or the wiring to  
this wall jack) may be  
defective. Contact your  
telephone service provider.  
The handset is out of  
range while on a call.  
Unable to  
call  
Failed phone call (the  
telephone line is in  
use).  
You may be using a new  
cable or VoIP service, the  
existing telephone jacks in  
your home may no longer  
work. Contact your service  
provider for solutions.  
Failed intercom call  
(there are already two  
handsets being used).  
There are new calls in  
the caller ID log.  
XX missed  
calls  
All system handsets  
are being paged.  
** Paging **  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
 
I cannot dial  
out.  
Make sure there is a dial  
tone before dialing. It is  
normal if the handset  
takes a second or two  
to synchronize with the  
telephone base before  
producing a dial tone. Wait  
an extra second before  
dialing.  
My handset  
beeps  
and is not  
performing  
normally.  
Move the handset closer  
to the telephone base. It  
may be out of range.  
I hear other  
calls when  
using the  
Disconnect the telephone  
base from the telephone  
wall jack. Plug in a  
telephone.  
different telephone. If you  
still hear other calls, the  
problem is probably in  
the wiring or telephone  
service. Contact your  
telephone service  
Eliminate any background  
noise. Mute the handset  
before dialing, or dial  
from another room in  
your home with less  
background noise.  
provider.  
I hear noise  
on the  
Make sure the telephone  
line cord is plugged in  
securely.  
The display  
shows To  
register HS...  
and ...see  
manual  
alternately.  
The handset  
does not work  
at all.  
The handset is  
cordless  
deregistered from the  
telephone base.  
handset and  
the keys do  
not work.  
Place the handset in the  
telephone base to register  
it back. The handset  
shows Registered and  
you hear a beep when  
the registration process  
completes. This process  
takes about 90 seconds to  
complete.  
The display  
shows Low  
battery.  
Place the handset in the  
telephone base or charger  
for charging.  
The battery  
does not  
Make sure the handset is  
placed in the telephone  
base or charger correctly.  
charge in the  
handset or  
the handset  
battery does  
not accept  
charge.  
If the battery is completely  
depleted, charge the  
battery for at least 30  
minutes before use.  
You may need to purchase  
a new battery.  
The telephone Make sure the ringer  
does not ring volume is not set to off.  
when there is  
The handset may be too  
an incoming  
far from the telephone  
call.  
base. Move it closer to the  
telephone base.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
There is  
interference  
during a  
telephone  
conversation.  
My calls fade  
out when  
I am using  
the cordless  
handset.  
The handset may be out  
of range. Move it closer to  
the telephone base.  
The telephone Caller ID is a subscription  
does not service.You must  
receive caller subscribe to this service  
ID or the  
telephone  
does not  
show caller  
ID during call  
waiting.  
from your telephone  
service provider for this  
feature to work on your  
telephone.  
If you subscribe to high-  
speed Internet service  
(DSL - digital subscriber  
line) through your  
telephone line, you must  
install a DSL filter between  
the telephone line cord  
and the telephone wall  
jack.The filter prevents  
noise and caller ID  
problems caused by DSL  
interference. Contact your  
DSL service provider for  
more information about  
DSL filters.  
Both your and the  
caller’s telephone service  
providers must use  
equipment compatible  
with the caller ID service.  
The caller may not be  
calling from an area which  
supports caller ID.  
The caller ID information  
displays after the first or  
second ring.  
Appliances or other  
cordless telephones  
plugged into the same  
circuit as the telephone  
base can cause  
The display  
The handset may be out  
shows Out of of range. Move it closer to  
range or no  
pwr at base.  
the telephone base.  
interference. Try moving  
the appliance or telephone  
base to another outlet.  
Make sure the power cord  
is securely plugged into  
the telephone base. Use  
a working electrical outlet  
not controlled by a wall  
switch.  
The location of your  
telephone base can  
impact the performance  
of your cordless phone.  
For better reception,  
install the telephone base  
in a centralized location  
within your home or  
office, away from walls  
or other obstructions.  
In many environments,  
elevating the telephone  
base improves overall  
performance.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
I subscribe  
to a  
Make sure your computer  
is powered on, and  
ECO mode  
This power conserving technology  
reduces power consumption for optimal  
battery performance. The ECO mode  
activates automatically whenever  
the handset is synchronized with the  
telephone base.  
nontraditional your Internet is working  
telephone  
service that  
uses my  
properly.  
Make sure to plug your  
USB telephone adapter  
into a dedicated USB port  
on your computer. Do not  
plug into a multiple port  
USB hub (USB splitter)  
that is not powered.  
computer  
to establish  
connections,  
and my  
The handset shows ECO when the  
ECO mode activates.  
telephone  
doesn’t work.  
In a few rare instances,  
the USB port on your  
computer may not have  
enough power. In these  
instances, try using a USB  
hub with its own external  
power supply.  
If you are using a firewall,  
it may prevent access  
to your nontraditional  
telephone service. Contact  
your service provider for  
more information.  
I accidentally  
set my LCD  
language  
While the handset is not in  
use or is on a call, press  
MENU and then enter  
364# to change the  
handset LCD language  
back to English.  
to Spanish  
or French,  
and I don’t  
know how to  
change it back  
to English.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
 
General product care  
The RBRC® seal  
The RBRC® seal on the nickel-metal  
hydride battery indicates that VTech  
Communications, Inc. is voluntarily  
participating in an industry program to  
collect and recycle these batteries at the  
end of their useful lives, when taken out  
of service within the United States and  
Canada.  
Taking care of your telephone  
Your cordless telephone contains  
sophisticated electronic parts, so it must  
be treated with care.  
Avoid rough treatment  
Place the handset down gently. Save the  
original packing materials to protect your  
telephone if you ever need to ship it.  
The RBRC® program provides a  
convenient alternative to placing used  
nickel-metal hydride batteries into the  
trash or municipal waste, which may be  
illegal in your area.  
VTech’s participation in RBRC® makes it  
easy for you to drop off the spent battery  
at local retailers participating in the  
RBRC® program or at authorized VTech  
product service centers. Please call  
1 (800) 8 BATTERYTM for information  
on Ni-MH battery recycling and disposal  
bans/restrictions in your area. VTech’s  
involvement in this program is part of its  
commitment to protecting our environment  
and conserving natural resources.  
Avoid water  
Your telephone can be damaged if  
it gets wet. Do not use the handset  
outdoors in the rain, or handle it with wet  
hands. Do not install the telephone base  
near a sink, bathtub or shower.  
Electrical storms  
Electrical storms can sometimes cause  
power surges harmful to electronic  
equipment. For your own safety, take  
caution when using electrical appliances  
during storms.  
Cleaning your telephone  
Your telephone has a durable plastic  
casing that should retain its luster for  
many years. Clean it only with a dry non-  
abrasive cloth. Do not use dampened  
cloth or cleaning solvents of any kind.  
RBRC® is a registered trademark  
of Rechargeable Battery Recycling  
Corporation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
 
and (2) this device must accept  
any interference received, including  
interference that may cause undesired  
operation. Privacy of communications  
may not be ensured when using this  
telephone.  
FCC, ACTA and IC  
regulations  
FCC Part 15  
This equipment has been tested and  
found to comply with the requirements  
for a Class B digital device under Part  
15 of the Federal Communications  
Commission (FCC) rules. These  
To ensure safety of users, the FCC  
has established criteria for the amount  
of radio frequency energy that can be  
safely absorbed by a user or bystander  
according to the intended usage of the  
product. This product has been tested  
and found to comply with the FCC  
criteria. The handset may be safely  
held against the ear of the user. The  
telephone base shall be installed and  
used such that parts of the user’s body  
other than the hands are maintained at  
a distance of approximately 20 cm  
(8 inches) or more.  
requirements are intended to provide  
reasonable protection against harmful  
interference in a residential installation.  
This equipment generates, uses and  
can radiate radio frequency energy and,  
if not installed and used in accordance  
with the instructions, may cause harmful  
interference to radio communications.  
However, there is no guarantee that  
interference will not occur in a particular  
installation. If this equipment does  
cause harmful interference to radio  
or television reception, which can be  
determined by turning the equipment off  
and on, the user is encouraged to try to  
correct the interference by one or more  
of the following measures:  
This Class B digital apparatus complies  
with Canadian requirement:  
CAN ICES-3 (B)/NMB-3(B)  
FCC Part 68 and ACTA  
This equipment complies with  
• Reorient or relocate the receiving  
antenna.  
Part 68 of the FCC rules and with  
technical requirements adopted by the  
Administrative Council for Terminal  
Attachments (ACTA). The label on  
the back or bottom of this equipment  
contains, among other things, a  
product identifier in the format US:  
AAAEQ##TXXXX. This identifier must  
be provided to your telephone service  
provider upon request.  
• Increase the separation between the  
equipment and receiver.  
• Connect the equipment into an outlet  
on a circuit different from that to which  
the receiver is connected.  
• Consult the dealer or an experienced  
radio/TV technician for help.  
Changes or modifications to this  
equipment not expressly approved by  
the party responsible for compliance  
could void the user’s authority to  
operate the equipment.  
The plug and jack used to connect this  
equipment to premises wiring and the  
telephone network must comply with  
applicable Part 68 rules and technical  
requirements adopted by ACTA. A  
compliant telephone cord and modular  
plug is provided with this product. It is  
designed to be connected to a compatible  
modular jack that is also compliant. An  
This device complies with Part 15 of the  
FCC rules. Operation is subject to the  
following two conditions: (1) this device  
may not cause harmful interference,  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
 
RJ11 jack should normally be used for  
connecting to a single line and an RJ14  
jack for two lines. See the installation  
instructions in the user’s manual.  
may make changes in its facilities,  
equipment, operation, or procedures  
that could affect the proper functioning  
of this product. The telephone service  
provider is required to notify you if such  
changes are planned.  
The Ringer Equivalence Number (REN)  
is used to determine how many devices  
you may connect to your telephone  
line and still have them ring when you  
are called. The REN for this product is  
encoded as the 6th and 7th characters  
following the US: in the product identifier  
(e.g., if ## is 03, the REN is 0.3). In  
most, but not all areas, the sum of  
all RENs should be five (5.0) or less.  
For more information, contact your  
telephone service provider.  
If this product is equipped with a corded  
or cordless handset, it is hearing aid  
compatible.  
If this product has memory dialing  
locations, you may choose to store  
emergency telephone numbers (e.g.,  
police, fire, medical) in these locations.  
If you do store or test emergency  
numbers, please:  
Remain on the line and briefly explain  
the reason for the call before hanging up.  
This equipment may not be used with  
Party Lines. If you have specially wired  
alarm dialing equipment connected  
to your telephone line, ensure the  
Perform such activities in off-peak hours,  
such as early morning or late evening.  
connection of this equipment does not  
disable your alarm equipment. If you  
have questions about what will disable  
alarm equipment, consult your telephone  
service provider or a qualified installer.  
Industry Canada  
Operation is subject to the following  
two conditions: (1) this device may not  
cause harmful interference, and (2) this  
device must accept any interference  
received, including interference that  
may cause undesired operation.  
If this equipment is malfunctioning, it  
must be unplugged from the modular jack  
until the problem has been corrected.  
Repairs to this telephone equipment can  
only be made by the manufacturer or its  
authorized agents. For repair procedures,  
follow the instructions outlined under the  
Limited warranty.  
Privacy of communications may not be  
ensured when using this phone.  
The term ‘’IC:‘’ before the certification/  
registration number only signifies  
that the Industry Canada technical  
specifications were met.  
If this equipment is causing harm to  
the telephone network, the telephone  
service provider may temporarily  
The Ringer Equivalence Number (REN)  
for this terminal equipment is 0.1. The  
REN is an indication of the maximum  
number of devices allowed to be connected  
to a telephone interface. The termination  
on an interface may consist of any  
combination of devices subject only to  
the requirement that the sum of the RENs  
of all the devices does not exceed five.  
discontinue your telephone service. The  
telephone service provider is required  
to notify you before interrupting service.  
If advance notice is not practical, you  
will be notified as soon as possible. You  
will be given the opportunity to correct  
the problem and the telephone service  
provider is required to inform you of  
your right to file a complaint with the  
FCC. Your telephone service provider  
This product meets the applicable  
Industry Canada technical  
specifications.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
California Energy  
Commission battery  
charging testing  
instructions  
This telephone meets the California Energy  
Commission (CEC) regulations for energy  
consumption. It is not necessary to activate  
the energy conserving mode during normal  
usage, unless you want to charge the battery  
only and disable all telephone functions.  
For C-UL compliance only  
Mesures de sécurité  
importantes  
Afin de réduire les risques d’incendie,  
de blessures corporelles ou  
d’électrocution, suivez toujours ces  
mesures préventives de base lorsque  
vous utilisez votre téléphone :  
1. Lisez et comprenez bien toutes les  
instructions.  
2. Observez toutes les instructions  
et mises en garde inscrites sur  
l’appareil.  
To activate the CEC battery charging  
testing mode:  
1.Unplug the telephone base power  
adapter from the power outlet. Make sure  
all handsets are plugged with charged  
batteries before proceeding.  
3. Débranchez ce téléphone de la prise  
murale avant de le nettoyer. N’utilisez  
pas de nettoyeurs liquides ni en  
aérosol. N’utilisez qu’un chiffon doux  
et légèrement humecté.  
4. N’utilisez pas ce produit près de l’eau,  
tel que près d’un bain, d’un lavabo,  
d’un évier de cuisine, d’un bac de  
lavage ou d’une piscine, ou dans un  
sous-sol humide ou sous la douche.  
5. Ne déposez pas ce téléphone sur un  
chariot, support ou table chancelants.  
Lappareil pourrait tomber et être  
sérieusement endommagé.  
6. Le boîtier de l’appareil est doté de  
fentes et d’ouvertures d’aération  
situées à l’arrière ou en dessous.  
Afin d’empêcher la surchauffe,  
ces ouvertures ne doivent pas être  
obstruées en plaçant l’appareil sur  
un lit, divan, tapis ou autre surface  
similaires. Ne placez pas cet  
appareil à proximité d’un élément de  
chauffage ni d’une plinthe électrique.  
De plus, ne l’installez pas dans une  
unité murale ou un cabinet fermé qui  
ne possède pas d’aération adéquate.  
7. Ne faites fonctionner cet appareil  
qu’avec le type d’alimentation indiqué  
sur les étiquettes de l’appareil. Si  
2.While you press and hold  
/FIND HANDSET, plug the telephone base  
power adapter back to the power outlet.  
3.After about 20 seconds, when the  
IN USE light starts flashing, release  
/FIND HANDSET and then press it again  
within 2 seconds.  
The process takes up to one minute to  
complete. When the phone successfully  
enters the CEC battery charging testing  
mode, the IN USE light turns off and all  
handsets display To register HS... and  
...see manual alternately.  
When the phone fails to enter this mode,  
repeat Step 1 through Step 3 above. The  
telephone base will be powered up as  
normal if you fail to press /FIND HANDSET  
within 2 seconds in Step 3.  
To deactivate the CEC battery charging  
testing mode:  
1.Unplug the telephone base power adapter  
from the power outlet, and then plug  
it back in. Then the telephone base is  
powered up as normal.  
2.Place the handset in the telephone base  
to register it back. The handset displays  
Registering....  
NOTE  
The handset shows Registered and you hear a  
beep when the registration process completes.  
The registration process takes about 90 seconds  
to complete.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32  
 
vous ne connaissez pas le voltage  
de votre maison, consultez votre  
marchand ou votre fournisseur  
d’électricité.  
• Si le produit ne fonctionne pas  
• normalement en respectant les  
instructions de fonctionnement.  
Réglez uniquement les  
commandes indiquées dans le les  
instructions de fonctionnement.  
Les réglages incorrects des autres  
commandes pourraient provoquer  
un dommage qui pourrait exiger  
un travail exhaustif de la part d’un  
technicien autorisé afin de rétablir  
le fonctionnement normal de  
8. Ne déposez rien sur le cordon  
d’alimentation. Installez cet appareil  
dans un endroit sécuritaire, là où  
personne ne pourra trébucher sur  
la ligne d’alimentation ni le cordon  
téléphonique modulaire.  
9. N’insérez jamais d’objets à travers  
les fentes et ouvertures de cet  
appareil, car ils pourraient toucher  
à des points de tension dangereux  
ou court-circuiter des pièces, ce qui  
constituerait un risque d’incendie ou  
d’électrocution. N’échappez pas de  
liquides dans l’appareil.  
10.Afin de réduire les risques  
d’électrocution, ne démontez pas  
l’appareil, mais apportez-le plutôt  
à un centre de service qualifié s’il  
doit être réparé. En enlevant le  
couvercle, vous vous exposez à des  
tensions dangereuses ou autres  
dangers similaires. Un remontage  
inadéquat peut être à l’origine d’une  
électrocution lors d’une utilisation  
ultérieure de l’appareil. Débranchez  
l’appareil avant de procéder au  
nettoyage. Utilisez un chiffon humide  
et doux.  
l’appareil.  
• Si le produit a été échappé et que  
le socle et/ou le combiné a été  
endommagé.  
• Si le produit affiche une nette  
diminution de sa performance.  
13.Évitez d’utiliser un téléphone (autre  
qu’un sans fil) pendant un orage.  
Les éclairs peuvent être à l’origine  
d’une électrocution.  
14.N’utilisez pas le téléphone pour  
rapporter une fuite de gaz à  
proximité de la fuite. En certaines  
circonstances, une flammèche  
pourrait être provoquée lorsque  
l’adaptateur est branché à une  
prise de courant, ou lorsque le  
combiné est déposé sur le socle.  
Ceci est un événement commun  
associé à la fermeture d’un circuit  
électrique. Lutilisateur ne devrait pas  
brancher le téléphone à une prise de  
courant, et ne devrait pas déposer  
le combiné chargé sur le socle, si  
le téléphone se trouve à proximité  
d’un endroit comportant des  
concentrations de gaz inflammables,  
à moins que la ventilation soit  
adéquate. Une flammèche dans  
un tel endroit pourrait provoquer  
un incendie ou une explosion.  
De tels environnements peuvent  
comprendre: des endroits où l’on  
utilise de l’oxygène médical sans  
11.Ne surchargez pas les prises de  
courant et les rallonges.  
12.Débranchez cet appareil de la prise  
de courant et communiquez avec le  
département de service à la clientèle  
de VTech dans les cas suivants:  
• Lorsque le cordon d’alimentation  
est endommagé ou écorché.  
• Si du liquide a été échappé dans  
l’appareil.  
• Si l’appareil a été exposé à une  
source d’humidité telle que la  
pluie ou l’eau.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
ventilation adéquate; des gaz  
de recherche indépendante, a mené  
industriels (dissolvants de nettoyage, une évaluation pluridisciplinaire des  
des vapeurs d’essence, etc.); une  
fuite de gaz naturel, etc.  
interférences entre les téléphones  
sans fil portatifs et les stimulateurs  
cardiaques implantés dans l’organisme.  
Appuyée par l’Administration des  
aliments et drogues (FDA) des États-  
Unis, la firme WTR recommande aux  
médecins:  
15.Ne placez que le combiné de votre  
téléphone près de votre oreille  
lorsqu’en mode de conversation.  
16.Ces adaptateurs ont été conçus pour  
être orientés en position verticale  
ou montés au sol. Les broches ne  
sont pas conçues pour maintenir  
l’adaptateur en place si celui-ci est  
barnché dans une prise au plafond  
ou sous une table/ armoire.  
Avis aux détenteurs de stimulateurs  
cardiaques  
• Ils doivent tenir le téléphone sans fil  
à une distance d’au moins six pouces  
du stimulateur cardiaque.  
• Ils ne doivent PAS placer le téléphone  
sans fil directement sur le stimulateur  
cardiaque, tel que dans une poche  
de chemise, lorsque celui-ci est en  
marche.  
• Ils doivent utiliser le téléphone sans  
fil en l’appuyant sur l’oreille qui se  
trouve dans la direction opposée au  
stimulateur cardiaque.  
CONSERVEZ CES INSTRUCTIONS  
Pile  
• MISE EN GARDE : N’utilisez que la  
pile incluse.  
• Ne jetez pas la pile au feu. Vérifiez  
les instructions spécifiques de mise  
aux rebus auprès des autorités  
locales.  
• N’ouvrez pas et ne mutilez pas la  
pile. Lélectrolyte qui s’en échapperait  
est corrosif et pourrait causer des  
brûlures ou des blessures aux yeux  
ou à la peau. Lélectrolyte est toxique  
si avalé.  
Létude effectuée par l’organisme WRS  
n’a pas identifié de risque pour les  
détenteurs de simulateurs cardiaques  
causés par les gens qui utilisent un  
téléphone sans fil à proximité de ceux-ci.  
• Soyez prudents lorsque vous  
manipulez les piles afin d’éviter les  
courts-circuits provoqués par des  
matériaux conducteurs.  
• Rechargez la pile incluse avec cet  
appareil, selon les instructions et  
limites spécifiées dans ce guide  
d’utilisation.  
À propos des téléphones sans fil  
• Alimentation électrique: Les mêmes  
caractéristiques qui constituent  
des avantages pour les téléphones  
sans fil affichent également des  
restrictions. Les appels téléphoniques  
sont transmis entre le combiné sans  
fil et le socle par le biais d’ondes  
radio ; il y a donc la possibilité que  
vos conversations téléphoniques  
sans fil soient interceptées par  
Stimulateurs cardiaques implantés  
dans l’organisme  
Les simulateurs cardiaques (s’applique  
uniquement aux téléphones numériques  
sans fil):  
des équipements de réception  
radio se trouvant dans la portée du  
combiné sans fil. Pour cette raison,  
vous ne devez pas percevoir les  
Lorganisme ‘Wireless Technology  
Research, LLC (WTR)’, une firme  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
communications téléphoniques sans fil  
comme étant aussi confidentielles.  
Limited Warranty  
What does this limited warranty  
cover?  
• Alimentation électrique: Le socle  
de ce téléphone sans fil doit être  
branché à une prise électrique  
fonctionnelle. La prise électrique  
ne doit pas être contrôlée par un  
interrupteur mural. Les appels ne  
pourront pas être effectués du  
combiné sans fil si le socle est  
débranché ou mis hors tension ou si  
le courant est coupé.  
The manufacturer of this VTech Product  
warrants to the holder of a valid proof of  
purchase (“Consumer” or “you”) that the  
Product and all accessories provided  
in the sales package (“Product”)  
are free from defects in material and  
workmanship, pursuant to the following  
terms and conditions, when installed  
and used normally and in accordance  
with the Product operating instructions.  
This limited warranty extends only to the  
Consumer for Products purchased and  
used in the United States of America  
and Canada.  
• Possibilité d’interférences aux  
téléviseurs: Certains téléphones  
sans fil fonctionnent sur des  
fréquences pouvant causer des  
interférences aux téléviseurs et aux  
magnétoscopes. Pour réduire ou  
prévenir de telles interférences, ne  
placez pas le socle du téléphone  
sans fil près ou sur un téléviseur ou  
magnétoscope. S’il y a présence de  
parasites, il est conseillé d’éloigner  
le téléphone sans fil du téléviseur  
ou du magnétoscope afin de réduire  
possiblement les interférences.  
What will VTech do if the Product is  
not free from defects in materials  
and workmanship during the  
limited warranty period (“Materially  
Defective Product”)?  
During the limited warranty period,  
VTech’s authorized service  
representative will repair or replace  
at VTech’s option, without charge, a  
Materially Defective Product. If we  
repair the Product, we may use new or  
refurbished replacement parts. If we  
choose to replace the Product, we may  
replace it with a new or refurbished  
Product of the same or similar design.  
We will retain defective parts, modules,  
or equipment. Repair or replacement of  
the Product, at VTech’s option, is your  
exclusive remedy. VTech will return the  
repaired or replacement Products to  
you in working condition. You should  
expect the repair or replacement to take  
approximately 30 days.  
• Piles rechargeables: Manipulez  
les piles avec soin afin de ne pas  
les court-circuiter avec des bagues,  
bracelets ou clés. Les piles ou le  
conducteur peut surchauffer et  
causer des blessures. Respectez la  
polarité adéquate entre la pile et le  
chargeur.  
• Les bloc-piles rechargeables à  
l’hydrure métallique de nickel:  
Jetez ces blocs-piles de manière  
écologique et sécuritaire. Ne les  
incinérez pas et ne les percez pas.  
Tel que les autres piles de ce type,  
elles pourraient dégager une matière  
toxique qui peut causer des blessures  
corporelles si elles sont brûlées ou  
percées.  
How long is the limited warranty  
period?  
The limited warranty period for the  
Product extends for ONE (1) YEAR from  
the date of purchase. If VTech repairs or  
replaces a Materially Defective Product  
under the terms of this limited warranty,  
this limited warranty also applies to  
the repaired or replacement Product  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
 
for a period of either (a) 90 days from  
the date the repaired or replacement  
Product is shipped to you or (b) the  
time remaining on the original one-year  
warranty; whichever is longer.  
How do you get warranty service?  
To obtain warranty service in the United  
States of America, please visit our  
website at www.vtechphones.com or  
call 1 (800) 595-9511. In Canada, go to  
1 (800) 267-7377.  
What is not covered by this limited  
warranty?  
NOTE: Before calling for service, please  
review the user’s manual - a check of  
the Product’s controls and features may  
save you a service call.  
This limited warranty does not cover:  
1. Product that has been subjected  
to misuse, accident, shipping or  
other physical damage, improper  
installation, abnormal operation or  
handling, neglect, inundation, fire,  
water or other liquid intrusion; or  
2. Product that has been damaged due  
to repair, alteration or modification  
by anyone other than an authorized  
service representative of VTech; or  
3. Product to the extent that the  
problem experienced is caused by  
signal conditions, network reliability,  
or cable or antenna systems; or  
4. Product to the extent that the  
problem is caused by use with non-  
VTech accessories; or  
5. Product whose warranty/quality  
stickers, product serial number plates  
or electronic serial numbers have  
been removed, altered or rendered  
illegible; or  
6. Product purchased, used, serviced,  
or shipped for repair from outside the  
United States of America or Canada,  
or used for commercial or institutional  
purposes (including but not limited to  
Products used for rental purposes);  
or  
Except as provided by applicable law,  
you assume the risk of loss or damage  
during transit and transportation and  
are responsible for delivery or handling  
charges incurred in the transport of  
the Product(s) to the service location.  
VTech will return repaired or replaced  
Product under this limited warranty.  
Transportation, delivery or handling  
charges are prepaid. VTech assumes no  
risk for damage or loss of the Product  
in transit. If the Product failure is not  
covered by this limited warranty, or proof  
of purchase does not meet the terms of  
this limited warranty, VTech will notify  
you and will request that you authorize  
the cost of repair prior to any further  
repair activity.You must pay for the  
cost of repair and return shipping costs  
for the repair of Products that are not  
covered by this limited warranty.  
What must you return with the  
Product to get warranty service?  
1. Return the entire original package  
and contents including the Product to  
the VTech service location along with  
a description of the malfunction or  
difficulty; and  
2. Include a “valid proof of purchase”  
(sales receipt) identifying the Product  
purchased (Product model) and the  
date of purchase or receipt; and  
3. Provide your name, complete  
and correct mailing address, and  
telephone number.  
7. Product returned without a valid proof  
of purchase (see item 2 on the next  
page); or  
8. Charges for installation or set up,  
adjustment of customer controls,  
and installation or repair of systems  
outside the unit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36  
Other limitations  
Technical Specifications  
This warranty is the complete and  
exclusive agreement between you  
and VTech. It supersedes all other  
written or oral communications related  
to this Product. VTech provides no  
other warranties for this Product. The  
warranty exclusively describes all of  
VTech’s responsibilities regarding the  
Product. There are no other express  
warranties. No one is authorized to  
make modifications to this limited  
warranty and you should not rely on any  
such modification.  
State/Provincial Law Rights: This  
warranty gives you specific legal  
rights, and you may also have other  
rights, which vary from state to state or  
province to province.  
Limitations: Implied warranties,  
including those of fitness for a particular  
purpose and merchantability (an  
Frequency  
control  
Crystal controlled PLL  
synthesizer  
Transmit  
frequency  
Handset:  
1921.536-1928.448 MHz  
Telephone base:  
1921.536-1928.448 MHz  
Channels  
5
Nominal  
effective  
range  
Maximum power allowed  
by FCC and IC. Actual  
operating range may vary  
according to environment  
conditions at the time of  
use.  
Power  
requirements battery  
Handset: 2.4V Ni-MH  
Telephone base:  
6V AC @ 300mA  
unwritten warranty that the Product is  
fit for ordinary use) are limited to one  
year from the date of purchase. Some  
states/provinces do not allow limitations  
on how long an implied warranty lasts,  
so the above limitation may not apply to  
you. In no event shall VTech be liable  
for any indirect, special, incidental,  
consequential, or similar damages  
(including, but not limited to lost profits  
or revenue, inability to use the Product  
or other associated equipment, the cost  
of substitute equipment, and claims by  
third parties) resulting from the use of  
this Product. Some states/provinces do  
not allow the exclusion or limitation of  
incidental or consequential damages,  
so the above limitation or exclusion may  
not apply to you.  
Charger: 6V AC @ 300mA  
Memory  
Handset directory:  
50 memory locations;  
up to 30 digits and  
15 characters  
Handset caller ID log:  
50 memory locations;  
up to 24 digits and  
15 characters  
Please retain your original sales  
receipt as proof of purchase.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37  
 
Designed to fit your home.  
And your life.  
VTech Communications, Inc.  
A member of THE VTECH GROUP OF COMPANIES.  
VTech is a registered trademark of VTech Holdings Limited.  
Specifications are subject to change without notice.  
Copyright © 2014 for VTech Communications, Inc.  
All rights reserved. 09/14. CS6719_CIB_V4.0  
Document order number: 91-007064-020-100  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Tascam Blower cd rw900mkII User Manual
Technics Stereo System SC CH900 User Manual
Tivoli Audio Cassette Player Sound System User Manual
Toastmaster Automobile Accessories PRO OE3B3 User Manual
Toshiba Digital Camera PDR M4 User Manual
Triarch Indoor Furnishings 75365 10 User Manual
Vinotemp Refrigerator V5LR 2009 User Manual
Vinotemp Refrigerator VT 32 User Manual
VistaQuest Digital Camera VQ 5015 User Manual
Vulcan Hart Oven CO1717 User Manual