Uniden Network Router UIP1868P User Manual

UIP1868P Router Configuration Guide  
The UIP1868P can function as your primary gateway/router or as a device  
client within an existing network configuration.  
If you currently have broadband access and a gateway/router installed at  
your location, you may add the UIP1868P as a device client to your  
network. (SeeAbelow.) If you currently have broadband internet access  
and do not have a router, you may install your UIP1868P as the primary  
router to your network. (SeeBbelow.)  
A Installing the UIP1868P with an existing network  
configuration/router  
Computer  
Broadband  
modem  
Local router  
Internet  
UIP1868P  
Plug one end of the enclosed Ethernet cable into the WAN port on the  
back of the UIP1868P. Plug the other end of the Ethernet cable into your  
router/gateway which is connected to your broadband modem.The  
UIP1868P will automatically obtain an IP address from your existing  
router.  
B Installing the UIP1868P as your primary gateway/router  
Broadband  
modem  
UIP1868P  
Computer  
Local switch  
or router  
Internet  
The UIP1868P supports the two most common broadband connection  
protocols: DHCP (most common connection type found with Cable  
Modem) and PPPoE (most DSL providers use this connection type).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
2
Setting up with DHCP  
The UIP1868P is configured for use with Dynamic Host Configuration  
Protocol (DHCP) by default. If your broadband connection uses DHCP,  
simply connect your broadband modem to the WAN port of the  
phone and then connect the phone’s power cord to an AC power  
outlet.  
Setting up with PPPoE  
If your broadband connection uses PPPoE, you will need to configure  
the UIP1868P built-in router by inputting the user name and password  
provided by your Internet Service Provider. Follow the steps below to  
configure the UIP1868P to use a PPPoE-based connection.  
a) Connect a  
computer with a  
web browser  
Figure #1  
directly to the LAN  
port of your UIP1868P.  
(the default IP address of  
your UIP1868P) into the  
address bar of your web  
browser.Then press the  
Enter key. (See Figure #1)  
c) You should now see your  
Figure #2  
UIP1868P’s System  
Information Screen.  
(See Figure #2)  
d) In the menu bar down the left  
side of the screen, select WAN.  
e) In the menu bar on the top of  
the screen, select PPPoE.This  
opens the WAN PPPoE  
Configuration screen.  
(See Figure #3)  
Figure #3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
f) Under ENABLE PPPOE, click the drop-down arrow and  
select YES.  
g) Under Authentication, enter the USERNAME and PASSWORD  
that were provided by your ISP. Username and password are  
often case-sensitive, so be sure to enter upper and lower case  
letters correctly.  
h) Under Settings, select the radio button labeled KEEPALIVE.This  
configures the phone to maintain the PPPoE connection even  
when your computer is idle or turned off.  
i) When the utility displays a window telling you it must reboot  
the phone, make sure your broadband modem is connected to  
your phone's WAN port, then click  
OK.When the phone finishes  
rebooting, it will ask your  
broadband modem to assign an IP  
address. (See Figure #4)  
Figure #4  
NOTE: For detailed installation with PPPoE, please refer to UIP1868P User Interface Guide – Setting  
up with PPPoE section.  
C Setting up with a Static IP Address  
If your broadband provider has given you a static IP address, you will need  
to enter that information in the UIP1868P. Follow the steps below to  
configure the UIP1868P for use with a Static IP address.  
Connect a computer with a web browser directly to the LAN port of  
your UIP1868P.  
Type http://192.168.15.1.  
(the default IP address of  
your UIP1868P) into the  
Figure #5  
address bar of your web  
browser.Then press the Enter key.  
(See Figure #5)  
You should now see your  
UIP1868P’s System Information  
Screen.  
(See Figure #6)  
Figure #6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In the menu bar down the left side of the  
screen, select WAN.  
In the top menu bar, select WAN Settings.This  
will open the WAN Configuration screen.  
(See Figure #7)  
Select the radio button labeled SPECIFY FIXED  
WAN CONFIGURATION.  
Figure #7  
Enter the IP Address, Subnet Mask, and Gateway Address provided by  
your ISP.  
Click SAVE WAN CONFIGURATION.  
When the utility displays a window telling you it must reboot the  
phone, make sure your broadband modem is connected to your  
phone's WAN port, then click OK.When the phone finishes rebooting,  
it will ask your broadband modem to assign an IP address.  
(See Figure #8)  
NOTE: For detailed installation with a Static IP  
address, please refer to the UIP1868P User  
Interface Guide – WAN Configuration section.  
Figure #8  
You are now ready to activate your Packet8 account. (Please refer to  
the Uniden Quick Start Guide instructions for activating your Packet8  
account.)  
You can download a copy of the UIP1868P User Interface Guide at  
UPZZ76747EZ(0)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Packet8 Broadband Phone Service Reference Card  
Calling with Packet8 service—  
just like using your home or cell telephone  
To call anywhere in the world, dial: country code + area code + number.  
Example: the country code for the U.S. and Canada is “1.”  
Dial: 1+area code+number.  
Anyone can call you at your Packet8 phone number.  
Using the Features of your Packet8 service  
Advanced Call Features: these features are activated with the [Flash] key  
on your phone (or going on-hook for half second then going off-hook):  
Caller ID: automatic when presented.  
Call Waiting: a beep is heard when there is an incoming call.  
Answer the incoming call by pressing the [Flash] key.  
Line-alternate/Hold: press the [Flash] key to put the current line on hold.  
3-way Conferencing: during a call, press [Flash], call third party,  
then press [Flash] to conference. Press [Flash] again to drop the  
last person added.  
*69 Call Return: press *69 and stay on the line to automatically ring  
the last number that called your number.  
*70 Call Waiting Disable: to disable call waiting on a per-call basis,  
enter *70 before dialing.You can disable call waiting and send new  
callers to voicemail, or present a busy tone if voicemail is disabled  
while you are on a phone call.  
*77 Anonymous Call Rejection (ACR): a feature that rejects incoming calls  
from anonymous callers. It will automatically stop all incoming calls from  
callers who have their numbers blocked.To de-activate ACR, press *87.  
*78 Do Not Disturb: automatically send your calls directly to your voice  
messaging box without ringing your phone.You will hear a stutter tone on  
your phone to indicate the feature is turned on.To de-activate, press *79.  
Call Forwarding: you can forward your phone to ring somewhere else.  
Go to your account details page after signing in at www.packet8.net  
or call from your Packet8 phone: 012-0005.  
Communication for the  
Broadband Generation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VoiceMail Reference Card  
Using VoiceMail on your Packet8 service  
To check your Packet8 voicemail:  
From your Packet8: 012-0555  
From any phone, toll-free:1.888.898.7887  
From any phone outside the U.S.: 1.650.353.4400  
When prompted, enter your Packet8 phone number (1+area  
code+number) and then your password  
1
2
3
4
Next message  
If you have a message waiting, you can press:  
Replay message  
Delete message  
If you do not have a message waiting,  
you can press:  
Save messages and  
listen to the next  
1
8
Voicemail Preferences  
Listen to Saved Message  
1
2
#
Hear greeting  
1
2
3
4
Next message  
Delete and re-record greeting  
Put new greeting in service  
Replay message  
Delete message  
Send message as email  
There are two ways to change your voicemail settings, voicemail  
password, number of rings, and call settings:  
Access your account details page after signing in at www.packet8.net  
Call from your Packet8: 012-0005  
When prompted, enter your Packet8 phone number, then your password  
Telephone keypad map for changing your Packet8 account settings:  
1
2
3
Voicemail  
Call Settings  
Personal Access  
Password  
1
2
1
2
3
1
2
Voicemail  
Settings  
Ring Before  
Voicemail  
Answers  
Call  
Forwarding  
Int’l  
Caller ID  
Enable  
Password  
Re-enter  
Password  
Calling  
1
2
On  
Off  
1
On  
1
On  
1
On  
1
-
9
2
Off  
2
Off  
2
Off  
Packet8 Contact Information:  
Support:  
Automated Activation Service: 012-0001  
Customer Service,toll-free:1.888.898.8733  
Customer Service,outside U.S.:1.408.687.4120  
Automated IP Address/Phone Number  
Service: 012-0003  
Packet8 Voicemail: 012-0555  
3151 Jay Street  
Santa Clara, CA U.S.A. 95054  
Tel: 408.727.1885 • Fax: 408.980.0432  
w
Packet8, the Packet8 logo, and the 8x8, Inc. logo are registered trademarks of 8x8, Inc. 8x8, Inc. is a Nasdaq listed company, symbol EGHT.  
© 2005. 8x8, Inc. All rights reserved. QRC4001 0205  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Toastmaster Iron 3348 3348MEX User Manual
Toshiba DVD Recorder D R160SB User Manual
TRENDnet Modem 1206 User Manual
Trilogy Touch Technology Computer Monitor T3 HB15A1 User Manual
Uniden Two Way Radio GMR1438 2 User Manual
Univex Lawn Mower 405012X108 User Manual
Vector Marine Battery BD032806 User Manual
Verbatim Computer Drive External Hard Drive NAS User Manual
Vermont Casting Outdoor Fireplace BC36 User Manual
Viking Cooktop VGRT548 4G User Manual