Trilogy Touch Technology
15” Chassis Touch Screen Monitor
T3-HB15A1
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright © 2004, Trilogy Touch Technology, Inc. All rights reserved
The information contained in the document is subject to change without
notice. Nor does the contained information constitute a warranty, either
expressed or implied or as an obligation by Trilogy Touch Technology.
Trilogy Touch Technology shall not be liable for the accuracy of the
information, fitness for purpose or direct or indirect consequential damages.
Patents, patents under application, trademarks, copyrights and other
intellectual property rights may cover the information in this document.
Manufacturers or products mentioned in this document have their own
respective trademarks.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
WARNING: Do not operate the LCD Monitor with an unknown utility power voltage source. Usage of incorrect
voltage may cause malfunctions and could cause fire or electric shock.
INTRODUCTION
Thank your for your selection of this Trilogy Touch Technology product. Bright and sharp images of text and graphics
are what you will find with your LCD Monitor. This product provides multiple resolutions with a flicker-free, sharp, and
vibrant color display, without the radiated emission and hazards of CRT monitors.
FEATURES
·
·
·
·
·
·
·
·
·
·
·
·
·
Panel control functions
Support for XGA resolution of 1024x768 pixels
Wide viewing angle
Wide tilting angle
VESA DPMS power saving feature: powers off the monitor after a defined period of inactivity.
Digital Character Smoothing
Automatic Set-Up
Windows 95/98/2000/XP Plug & Play Compliant
Versatile, functional & User friendly OSD
Plug & Play: Conforms to the VESA standards and support DDC1/2B specification
Meets Energy Star guidelines for power management
UNPACKING AND CHECKING OF THE PACKING CONTENTS
Before unpacking your LCD Monitor, prepare a stable, level, and clean surface near a wall outlet. Set the LCD
Monitor box in an upright position and open from the top of the box before removing the right/left cushions.
It is highly recommended that all packaging materials be retained in the event that service is required.
ACCESSORIES INCLUDED
1 pc
1 pc
1 pc
1 pc
1 pcs
USB or
RS232
cable
VGA
Cable
Driver
CD
Power
Cord
User’s
Manual
Page 1
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM REQUIREMENTS
The following are basic requirements for using the Monitor. Please check the specifications and Supported Video
Timing section of this Users Guide for specifics.
·
·
This monitor requires connection to a personal computer. Both industry standard architecture and Macintosh
hardware is supported.
Various Operating System versions are supported for input operation. Please check the product features and
specifications to insure that the OS you intend to use is supported. The included software installation disc
contains the proper drivers for supported Operating Systems and devices.
An analog, VESA standard video card for the PC is required. This monitor complies with DPMS and Plug &
Play (DDC) standards.
·
·
The personal computer will require either a standard 9 pin serial COM port or USB port, depending on the
product version of the monitor. If the serial COM port is a 25 pin, D-connector, then an adaptor to 9-pin male
is required. In addition, consideration should be given to system IRQ assignments for serial operation, as the
controller cannot share an IRQ.
·
There should be enough electrical outlets to support the system installation. This would include the
calculation of total current requirements. Although not a strict requirement, a surge protected power source
is recommended.
USING TOUCH INPUT
The surface of this LCD Monitor is a sensor. Some degree of caution is required to insure the effectiveness and long
life as an input device. Avoid using sharp objects such as pens, pencils, scissors or screwdrivers as a pointing stylus.
After installation of the driver software, a calibration should be performed. This action insures that the graphic
coordinates match the coordinates, sometimes called mapping.
Different software applications may require specific “mouse click” parameters. The control panel will allow selection
of multiple types of mouse button actions.
Page 2
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING THE MONITOR
·
DO NOT install the monitor in areas where sudden temperature changes may occur, or in humid, dusty, or
smoky environments as it may cause fire, electric shock or damage.
·
·
·
·
·
DO NOT expose this product to rain, water, moisture, or sunlight
MAINTAIN good ventilation; covering of ventilation slots or holes may cause a fire
PLACE the monitor at least 4” (or 10 cm) way from the walls
SAFE storage temperature of the LCD Monitor is in a range of -20 to +65
Install the software drivers via the supplied CD following standard operating system procedures
NOTE
Remember that the connection of USB devices is done after the software drivers are loaded. Further
instructions are provided during software installation and through the Help files on the driver CD.
CONNECTING THE MONITOR
1. Turn off the PC and the LCD Monitor before making any connections.
2. Use the supplied VGA cable to connect the VGA connector of the LCD Monitor to the VGA port of the PC
system.
3. Connect the male end of the power cord into a wall socket and the female end to the Monitor.
4. If your Monitor has a USB interface, use the supplied USB cable to connect the USB connector of LCD
Monitor to the USB port of the PC system. Remember to follow proper software driver installation.
5. If your Monitor has a RS232 serial interface, unplug the PC keyboard and reconnect it to the supplied serial
cable power adaptor. Connect the other end of the adaptor to the keyboard connector on the PC. Connect
the serial D-connector to and standard PC serial comport. Connect the other end or the serial interface cable
to the Monitor.
6. Turn on your computer, and then turn on your LCD Monitor.
uPower
Plug the power cord in.
vInput 1
Connect with detachable VGA cable.
wInput 2
Connect to USB/RS232 cable
(Touch Function)
NOTE
For added protection, it is recommended to use a Surge Protection device plugged between the AC Adapter
and the electrical wall outlet to prevent the effects of sudden current variations from reaching the LCD
Monitor. Sudden peaks of electricity may cause damage to the Monitor.
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE MONITOR
Users can adjust the picture to the desired brightness and sharpness by following these instructions. The adjustment
buttons utilize a security feature that required the use of a paper clip or pin to activate each selection. This is
accomplished through pinholes in each button except the power on/off.
1
2
3
4
Power Switch
Power On/Off
Automatically optimize positions, phase &
clock when OSD is not shown
Auto
Exit /
/
Exit the OSD menu when OSD is shown
Selection or adjustment when OSD is
shown/Quick brightness adjustment
Adjustment when OSD is shown/Quick
contrast adjustment
/
5
6
Menu
Enter OSD/Access sub-menu & selection
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE OSD (ON SCREEN DISPLAY)
The OSD function allows the user to easily adjust the display to the desired requirements. The OSD menu includes a
main menu and sub-menus.
OPERATING PROCEDURE
Use the buttons on the right side control panel to adjust the OSD (see Operating the Monitor).
Color Temp. Selection
Language
Volume Adjustment
Image Adjustment
Settings
Input Source Selection (optional)
Current Audio Status
Source Resolution & Frequency
Status
Color Temp. Status
Input Source Status
TO MAKE OSD ADJUSTMENTS:
1. Power on the LCD Monitor.
2. Press “MENU” button to pop up the OSD menu.
3. Press “+” or “-” button to select menu item.
4. Press “MENU” button to select sub-menu.
5. Press “+” or “-” button to select sub-menu item.
6. Press “EXIT” button when finished adjusting and accept the user setting.
7. Press “Auto” button to process auto tune function.
ADDITIONAL INFORMATION ABOUT THE ON SCREEN-DISPLAY
·
The OSD disappears (times-out) several seconds after you stop pressing the buttons while performing an
adjustment. This function can be adjusted up to 60 seconds allowing the user more time. This adjustment is
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
made in the “Settings” submenu.
·
·
Any changes made are automatically saved in the Monitor memory when the OSD disappears. Turning off the
power should be avoided while using the OSD, as this may not allow changes to be saved.
Adjustments for clock, phase and positions are saved for each signal timing or screen resolution. Except for
these adjustments, all other adjustments have only one setting that applies to all signal timing.
The submenu color will change from white to pink when the function is selected.
You can skip the OSD menu and display commonly used adjustment scales directly by using the following
button operations (refer to previous diagram for button locations):
·
·
Press the Brightness Button (3) when the Menu
is not displayed.
Brightness
Press the Contrast Button (2) when the Menu is
not displayed.
Contrast:
Auto
Setting:
Press the Auto Button (5) when the Menu is not
displayed.
The Auto Adjust process may take as much as 10 consecutive seconds. The display image will make noticeable
changes as the Auto Adjust function completes.
SELF-TEST CHECK:
This product provides a self-test ability, through which you can check whether the LCD monitor functions are working
properly. If your LCD monitor is properly connected, but there is no image showing and the power indicator light on the
Monitor displays orange, please follow the steps below:
1. Turn off both the computer and LCD monitor.
2. Unplug the video signal connector from the back of the computer.
3. Turn the LCD monitor on.
The monitor should display “No Signal Input” on the screen and the power LED indicator should be orange. If no
display is observed, there may be a problem with the Monitor.
Turn off the LCD monitor and reconnect the signal cable, then turn the computer and LCD monitor on. As the
computer boots, there should be a video display and the power LED should now be green. If the LED of the monitor is
an orange color after completing the steps above, please check your VGA card and computer system.
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU TABLE
Primary Secondary
Directory Directory
Description
Image
Brightness
Contrast
Clock
Adjust the brightness of the screen.
Adjust the contrast of the image.
Adjust the clock pulse of the image.
Adjust the focus of the image.
Phase
H. Position
V. Position
Sharpness
Move the image left and right on the screen.
Move the image up and down on the screen.
Adjust the picture sharpness of lower
resolutions.
Audio
Color
Volume
Mute
Adjust the volume of the audio.
Set the audio mute to be on or off
Set the color temp. to 9300K white color.
Set the color temp. to 7500K white color.
Set the color temp. to 6500K white color.
9300K
7500K
6500K
User/Red
User/Green
User/Blue
Adjust red/green/blue gain.
Language English
Français
Select the OSD language.
Adjust OSD display time setting.
Move OSD display position to any one of the
following 5 positions within the overall screen.
Italiano
Deutsch
Español
1
4
2
5
3
Settings OSD Timeout
OSD Position
Auto Setting
Set up to adjust clock, phase and positions
automatically.
Recall
Restore to factory settings
Input
Analog
Select Analog input source:
Source
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
FOR YOUR SAFETY
WARNING
·
·
ALWAYS OPERATE UNDER KNOWN POWER SUPPLY
Usage of incorrect voltage will cause malfunctions and may cause fire or electric shock.
PROTECT and CORRECTLY USE THE SIGNAL CABLES
Do not pull or bend the power cable and signal cable or place the monitor or any heavy objects on the cables.
If the cables are damaged, they may cause fire or electric shock.
IMMEDIATELY STOP OPERATING THE MONITOR WHEN YOU DETECT ANY ABNORMAL
OCCURRENCES
·
·
If you notice any abnormal phenomenon such as strange noise, smoke or smells, unplug the monitor and
contact your dealer or the nearest service center immediately.
DO NOT REMOVE THE CABINET
Removing the cabinet may expose you to the danger of fire or electric shock. Opening the product will void the
warranty.
·
·
DO NOT PUT ANY FOREIGN OBJECT INSIDE THE MONITOR
Modification of this product may result in improper operation as well as voiding the warranty.
DO NOT USE THE MONITOR NEAR WATER
Operating the monitor in close proximity to water where the water may enter the device may cause fire or
electric shock.
·
BAD WEATHER CONDITIONS
It is advisable not to operate the monitor during heavy thunderstorms as intermittent breaks in power may
cause malfunctions. Do not the plug under these circumstances as it may cause electric shock.
CAUTION
DISCONNECT CABLES WHEN MOVING THE MONITOR
ÿWhen moving the monitor, always turn off the power, unplug the monitor, and disconnect the signal cables.
DO NOT THE ELECTRICAL CONNECTIONS WITH WET HANDS
ÿPulling or inserting the plug with wet hands may cause electric shock.
HOLD THE PLUG WHEN DISCONNECTING
ÿTo disconnect the power cable or signal cables, always pull the cables by the plug. Never pull on the cable as this
may cause fire or electric shock.
OTHER CONSIDERATIONS
Ergonomics Recommendations
Do not operate the monitor in a dark room or against a bright background. For optimal viewing comfort, the monitor
should be just below eye level and 30-60 cm (16-24 inches) away from your eyes. When using the monitor over a
prolonged period of time, a ten-minute-break per hour is recommended.
Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL NOTES ON LCD MONITORS
The following are normal with LCD Monitors and do not indicate a problem.
·
When the LCD Monitor is first powered on, the picture may not fit in the display area. This is because of the
type of computer graphics system that is used. In such case, adjust the picture position to a desired image
(See Operating the Monitor).
·
·
·
The screen may flicker during initial use. Turn off the power and then turn it on again the flickering should
disappear.
Users may notice some uneven brightness on the screen depending on the desktop resolution they use. It is
normal for LCD Monitors to show uneven brightness.
Due to the nature of the LCD displays, images displayed on the screen for long periods of time may still
appear after the screen content has been changed. This phenomenon can be corrected, over time, by
switching display content or leaving the monitor off for a number of hours.
·
If the screen becomes dark, flickers, or does not light-up, contact your dealer or the nearest service center for
a backlight replacement. Do not attempt to replace it yourself.
CLEANING
WARNING
If you dropped any material or liquid such as water onto the monitor when cleaning, unplug the power cable
immediately and contact your dealer or the nearest service center. Always make sure your hands are dry
when unplugging the power cable.
CAUTION
·
·
·
For safety reasons, turn-off the power switch and unplug the monitor before cleaning.
Do not scratch or rub the screen with a hard object.
Never use any of the following solvents on the LCD Monitor. Such harsh chemicals may cause
damage to the cabinet and the sensor:
Thinner Spray-type cleaner, Benzene, Wax, Abrasive cleaner, Acid or Alkaline solvent
CABINET
Remove dirt with a lightly moistened cloth and a mild solvent detergent. Then wipe the cabinet with a soft dry
cloth.
·
DISPLAY AREA (SENSOR)
·
·
Periodic cleaning with a soft dry cloth is recommended. Non-abrasive household window-type cleaners are
recommended.
Do not use tissue to clean the display area. It may scratch or dull the LCD screen.
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER MANAGEMENT
This LCD Monitor complies with the VESA DPMS (version 1.0p) power management specification. DPMS provides
four types of power saving modes by detecting the horizontal or vertical sync signal. As well, the computer graphic
card also needs to be DPMS compliant to utilize these modes.
Power Power
Recovery
Item
DPMS Mode Display
H-sync V-sync
LED
Consumption Time
1
2
3
4
On
Normal
Green Normal
Amber 5W
Amber 5W
Amber 5W
---
On
On
Stand By
Suspend
Off
No Display
No Display
No Display
3 sec
3 sec
3 sec
< 10 KHz On
On
< 10 Hz
< 10 KHz < 10 Hz
SUPPORTED TIMING
Analog
Display Mode
Horizontal
Frequency
Vertical
Frequency
60.0 Hz
75.0 Hz
72.8 Hz
70.1 Hz
56.3 Hz
60.3 Hz
75.0 Hz
72.0 Hz
60.0 Hz
70.1 Hz
75.0 Hz
66.7 Hz
74.6 Hz
70.1 Hz
VGA 640 x 480 31.5 KHz
37.5 KHz
37.8 KHz
720 x 400 31.5 KHz
SVGA 800 x 600 35.2 KHz
37.9 KHz
VESA
46.9 KHz
48.1 KHz
XGA 1024 x 768 48.4 KHz
56.5 KHz
60.0 KHz
VGA 640 x 480 35.0 KHz
832 x 624 49.7 KHz
640 x 350 31.5 KHz
Macintosh
MS-DOS
TROUBLESHOOTING PROCEDURES
If the LCD Monitor fails to function correctly, please follow these steps for a possible solution.
1. Perform the adjustments according to Operating the Monitor section.
2. Refer to the following troubleshooting chart if you cannot resolve the problem from other sections of this Users
Page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide.
3. If the problem is not described below or you cannot correct the problem, stop using the monitor and contact your
dealer or the nearest service center for further assistance.
PROBLEM
No Display.
CHECK TO SEE:
Is the power cord is firmly plugged in the socket.
Is the power switch is turned on.
a) Power indicator does not light up.
Is the AC outlet is OK. Please check using another piece
of equipment.
Is a blank screen saver is active, use the keyboard or
mouse to activate.
Increasing the CONTRAST and/or BRIGHTNESS to
display an image.
b) Power indicator is green.
Is the computer is ON.
Is the signal cable is properly connected at both ends.
Is the signal timing of the computer is within the spec of
the monitor.
Is the power management mode is activated, use the
keyboard or mouse to activate.
c) Power indicator is amber.
Is the computer is ON.
Is the signal cable is properly connected at both ends.
Is the signal timing of the computer is within the spec.
Is the video output level of the computer within the spec.
(assuming the CONTRAST and BRIGHTNESS controls
has no effect.)
Display is too dark or too bright.
Is the signal timing of the computer is within the spec.
Some graphic cards have their own positioning controls.
Is the power voltage is within the spec.
Is the signal timing of the computer is within the spec.
Is the signal cable is properly connected at both ends.
Is the signal timing of the computer is within the spec, or
there is a graphic card failure
Display is not in the center.
Display is shaking.
Display is not synchronized.
Is the video output level of the computer is within the
spec.
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFORMITY AND COMPLIANCE
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a residential installation. This device generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
device does cause harmful interference to radio or television reception (this can be determined by turning, the device
off and on), you are encouraged to try to correct the interference by one or more of the following measures:
·
·
·
·
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution
To comply with the limits for an FCC Class B computing device, you should use the shielded
signal cord and shielded power cord supplied with this unit. The Federal Communication
Commission warns that changes or modifications of the unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the equipment.
RADIO FREQUENCY INTERFERENCE STATEMENT
Warning:
This is a Class B product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
CANADIAN DOC NOTICE
For Class B Computing Devices
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in
the Radio Interference Regulation of the Canadian Department of Communications.
CE MARKING DECLARATION OF CONFORMITY
This LCD Monitor complies with the requirements of related European standards, which include:
·
·
·
Emission: EN 55022, EN 61000-3-2, EN-61000-3-3
Immunity: EN 50082-1
Safety: EN 60950 [Low-Voltage Directive (73/23/EEC)
ENERGY STAR
This product meets the Energy Star guidelines for energy
efficiency.
Page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT SERVICE AND SUPPORT
Should this product fail or require service, please contact your Dealer or Distributor for service or support. The Dealer
or Distributor may have specific programs for support of this product, or may provide specific services outside the
scope of the manufacturer’s original warranty.
Should support from the manufacturer become necessary, please use the contact information listed below. Be
prepared to provide the following information, which is required.
ÿThe product model and serial number, found of the rear sticker of the monitor itself.
ÿYour name, company name and telephone number. As well, a shipping address may be necessary which cannot be a
post office box.
·
·
The name of the dealer or distributor from which the product was purchased.
The ability to provide specific failure details.
Support is limited to the monitor. Application software issues, Operating System operation or installation, PC
troubleshooting or software program development is beyond the scope of available technical support.
CONTACT INFORMATION
Mailing Address:
Trilogy Touch Technologies
One New Hampshire Avenue, Suite 125
Portsmouth, NH 03801
Telephone Number:
800 360-9019
Technical Support FAX:
Technical Support Email
866 398-3601
PRODUCT REGISTRATION
Trilogy products may be registered at our website. Doing so insures that any information, updates or revisions
concerning the product are sent. Be prepared to supply the model number, serial number and purchase vendor, as
well as contact information.
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty (United States)
Trilogy Touch Technology
TOUCH MONITOR LIMITED WARRANTY
A. Limited Warranty
Trilogy Touch Technology, Inc. (“Trilogy”) warrants the TFT-LCD touch monitor(s) (“the Monitor”) or (“product”) you
have purchased from Trilogy or from a Trilogy Authorized Reseller, to be free from defects in materials and
workmanship under normal use for a period of three (3) years. The warranty period begins on the date of purchase.
Your original purchase invoice (sales receipt) is your proof of purchase. If you cannot provide the original purchase
invoice (sales receipt), the warranty period will be based on the manufacture date-code shown on the monitor. A
Monitor that has been exchanged is warranted starting at the original date of purchase. The burden of warranty
entitlement is solely on the customer.
Should a defective product meet the warranty terms, Trilogy may provide an advance replacement product, shipped
within 24 business hours, at the customer’s request. Monetary security for the replacement is required.
This warranty extends only to the original purchaser; it is not transferable to anyone who subsequently purchases,
leases, or otherwise obtains the Monitor. It excludes expendable parts. During the warranty period, Trilogy will repair
or replace defective hardware with new or equal to new parts and products. All exchanged parts and monitors
replaced under this warranty will become the property of Trilogy. During the warranty period, there will be no charge
for labor or parts. Freight costs to return products to Trilogy will be the customer’s responsibility. If, after repeated
efforts, Trilogy is unable to repair the Monitor to good working order, the product may be replaced with an equal
product, solely at Trilogy’s discretion. Customers must notify Trilogy Technical Support, in writing within 30 days of a
service incident. If Trilogy determines that the product does not meet the warranty entitlements, then Trilogy’s sole
responsibility will be to offer a billable repair.
B. Warranty Limitation; Exclusion; Exclusive Remedies
This Limited Warranty does not extend to any Monitor that has been damaged; a) during or as a result of use other
than for its normal intended purpose, failure to use the monitor in accordance with the User’s Manual which
accompanies it, misuse, abuse, or negligence; (b) by the use of parts not manufactured or sold by Trilogy; (c)
modifications of the Monitor; (d) as a result of services by anyone other than Trilogy or freight damage when returning
the monitor to Trilogy or Trilogy’s Service Center; (f) due to unusual physical or electrical stress or interference, failure
or fluctuation of electrical power, lighting, static electricity, fire, floods, or any acts of God.
THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, RIGHTS OR CONDITIONS, EXPRESSLY OR
IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND CIRCUMSTANCES ARISING FOR
DEALING, CUSTOM OR THE USAGE OF TRADE. THE BUYER IS RESPONSIBLE FOR DETERMINING IF THE
PRODUCT IS SUITABLE FOR A SPECIFIC PURPOSE AND/OR MEETS THE BUYER’S PRODUCTION
REQUIREMENTS. TRILOGY SHALL NOT BE HELD LIABLE FOR ANY DAMAGES, INCIDENTAL OR
CONSEQUENTIAL, ARISING FROM OR IN CONNECTION TO THE USE OF THEIR PRODUCTS WHETHER OR
NOT IT IS CONSISTENT WITH ANY OTHER STATEMENT MADE IN THE WARRANTY DOCUMENT.
THIS LIMITED WARRANTY GIVES THE BUYER SPECIFIC LEGAL RIGHTS. THERE MAY ALSO BE OTHER
RIGHTS THAT VARY FROM STATE TO STATE. BUYERS ARE ADVISED TO CONSULT APPLICABLE STATE
OR PROVINCIAL LAWS FOR FULL DETERMINATION OF RIGHTS.
Page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
C. Trilogy Service Policies
Product service is subject to the following terms and conditions. Customers may contact their dealer or distributor for
their respective service entitlement and policies.
1. Service is available for Monitors purchased and located in the continental United States, Canada, Alaska, Hawaii
and Puerto Rico. Shipments to customers cannot be made to PO Boxes. Material returned to the Trilogy
Service Center may not come via USPS, as not all locations have parcel delivery.
2. Prior to obtaining service you must contact the Technical Support group. Please have the model number, serial
number, and date of purchase, ready when you call. The serial number (S/N) and model number are located on
the back of the monitor.
3. Products must be out of specification for service. Trilogy Touch Technology is the sole judge.
4. Trilogy Technical Support will attempt to help you resolve your problem over the telephone. During problem
resolution, Trilogy will require your assistance in performing routine diagnostic procedures. If appropriate, Trilogy
will then issue you a Return Materials Authorizations (RMA) number to be used as a means of identifying the
Monitor. NO PRODUCT MAY BE RETURNED FOR ANY REASON WITHOUT A RMA. FAILURE TO DO SO
WILL RESULT IN REFUSED SHIPMENTS.
5. Service must take place by returning the monitor to the designated Trilogy Service Center. The proper address
will be supplied at the time the RMA is issued. DO NOT RETURN PRODUCTS FOR SERVICE TO THE
CORPORATE ADDRESS. You must prepay any shipping charges, export taxes, custom duties and taxes or any
other charges associated with transporting the Monitor. In addition, you are responsible for insuring the Monitor
during shipment. You assume the risk of loss during shipment. Use the original shipping and packing materials
and include a description of the symptoms of the problem. If the original shipping and Packing materials and
boxes are not available, please make sure the monitor is properly packaged and secured inside a shipping
container. THE RETURN MATERIALS AUTHORIZATION (RMA) NUMBER MUST BE PLACED ON THE
EXTERIOR OF THE SHIPPING CONTAINER. PHYSICAL DAMAGE THAT OCCURRED DURING SHIPMENT IS
NOT WARRANTED.
6. RMAs EXPIRE IN 30 DAYS OF ISSUE DEFECTIVE PRODUCTS THAT HAVE A RMA MUST BE RETURNED
WITHIN THAT TIME.
7. Trilogy is not responsible for a monitor shipped to the Authorized Service Center. Products that arrive physically
or cosmetically damaged or scratched, including but not limited to, scratches on the Monitor, the panel, or bezel,
or damage beyond normal usage, will not be eligible for replacement. In this event, remedial service will be repair
and return. PRODUCTS THAT ARRIVE WITH COSMETIC OR PHYSICAL DAMAGE AT THE AUTHORIZED
SERVICE CENTER FROM AN ADVANCED REPLACEMENT, WILL BE ASSESSED A REPAIR CHARGE.
8. Advance Replacement: Customers that need a replacement monitor as soon as possible to decrease down time,
can arrange for cross shipping using a Credit Card as collateral. The value of the monitor will be authorized on the
customer’s credit card and held as collateral upon the shipment of the replacement monitor from the Trilogy
Service Center. The amount authorized will be cancelled upon receipt of the defective monitor back from the
customer. Shipment will be made via the most economical ground service. Standard policy terms apply to
Advance Replacement products. Please see above.
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
15” Chassis Monitor T3-HB15A1 Dimension Drawing
Trilogy Touch Technology
Dimensions in mm
Download from Www.Somanuals.com. All Manuals Search And Download.
|