Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your Phone......................................................33 Using Special Features.............................................42
During.a.Call..................................................... 34
Using.the.Caller.ID.List........................................... 35 Setting Up the Answering System...........................44
Adjusting the Ringer, Earpiece and
Operating.the.Answering.System..
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Rechargeable.Nickel-Metal-Hydride.Battery..
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Thank.you.for.purchasing.a.Uniden.Multi-Handset.phone.
Note:. Illustrations.in.this.manual.are.used.for.explanation.purposes..Some.illustrations.in.this.manual.may.differ.
from.the.actual.unit.
As.an.Energy.Star®.Partner,.Uniden.has.determined.that.this.product.or.product.models.meets.
the.Energy.Star® guidelines for energy efficiency. Energy Star®.is.a.U.S..registered.mark.
Uniden.is.a.registered.trademark.of.Uniden.America.Corporation.
Accessibility
Uniden.provides.a.customer.service.hotline.for.accessibility.questions..If.you.have.a.disability.and.need.customer.
service.assistance.or.if.you.have.any.questions.about.how.Uniden’s.products.can.accommodate.persons.with.
disabilities,.please.call.the.accessibility.voice/TTY.line:.ꢀ-800-874-93ꢀ4.
Our.customer.care.hours.as.well.as.accessibility.information.can.be.found.on.our.website,.www.uniden.com,.under.
the.“Accessibility”.link..If.your.call.is.received.outside.of.our.business.hours,.you.can.leave.us.a.message.and.we.will.
call.you.back.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Phone
Choosing the Best Location
When.choosing.a.location.for.your.new.phone,.here.are.some.important.guidelines.you.should.consider:
PLACE YOUR BASE
TRY TO AVOID
• Microwave ovens
• Refrigerators
• Fluorescent
lighting
• Other cordless
telephones
Near an AC outlet and
a telephone wall jack.
• Personal computers
• Wireless LAN
equipment
• A window
by a street
with
• TVs
• Other electronics
heavy traffic
• Dust
• Excessive
moisture
• Shock
• Vibration
In a centrally-located
open area.
• Direct sunlight
• Extreme temperatures
Note:. For.maximum.range:.
• Keep.both.the.base.and.handset.antennas.free.of.obstruction.
• When.the.handset.is.not.in.use,.place.the.handset.in.an.upright.position.
• Metal.and.reinforced.concrete.may.affect.cordless.telephone.performance.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Battery
Use.only.the.Uniden.BT-ꢀ008.rechargeable.battery.pack.supplied.with.your.cordless.telephone.
Press in on the handset
battery case cover.
Use the finger indention
for a better grip and slide
the cover downward to
remove.
Plug the battery cable into the
battery jack. Be sure to match the
red and black wires to the label
near the jack. The cable should
snap into place.
Replace the battery
case cover back on the
handset and slide it
upwards until it clicks
into place.
Gently pull on the battery cable.
If the battery connector comes
loose, try connecting again until
the battery snaps into place.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Belt Clip
Line.up.the.holes.on.each.side.of.the.handset..To.attach.the.belt.clip,.insert.into.the.holes.
on.each.side.of.the.handset..Press.down.until.it.clicks.
To remove the belt clip,.pull.either.side.of.the.belt.clip.to.release.the.tabs.from.the.holes.
Connecting the AC adapter
Base
To avoid risk of fire and shock, only use the Uniden PS-0009 AC adapter supplied with your cordless telephone.
Connect the AC adapter
to the DC IN 9V jack.
Route the cord inside the
molded wiring channel.
Connect the AC adapter to a
standard 120V AC wall outlet.
DO NOT use an AC outlet
controlled by a wall switch.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Charger (for multi-handset packs only)
Use.only.the.Uniden.PS-0007.AC.adapter.supplied.with.your.cordless.telephone.
Connect the AC
adapter to the
DC IN 9V jack.
Connect the AC adapter to a
standard 120V AC wall outlet.
DO NOT use an AC outlet
controlled by a wall switch.
Route the cord.
Charging the Handset
Place the handset(s) in the base
(and the chargers) with the
handset display facing forward.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Charge your handset at least 15 to 20 hours before plugging into the phone line.
What if the charge LED doesn’t light up?
Check the AC adapter connection.
The handset makes good contact with the
charging contacts.
Make sure that the charge LED illuminates.
Connecting to the Phone Line
Make.sure.that.the.battery.pack.is.fully.charged.
Connect the
telephone cord to a
telephone wall jack.
Connect the
telephone
cord to the
TEL LINE
jack.
What if CHECK
TEL LINE
appears on the
base display?
The telephone
cord may not be
connected
correctly. Check
the telephone
cord connection.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
DSL Filter
Do.you.have.DSL.or.any.high-speed.Internet.service.delivered.through.
your.phone.line?
Telephone
wall jack
Try putting a DSL filter between the base and the wall jack. Without a filter, .
telephone-line-based.Internet.services.can.interfere.with.standard.phones.
Telephone cord
DSL filter
Testing the Connection
Try.making.a.call..If.your.call.does.not.connect.or.you.cannot.get.a.dial.tone,.try.the.following.steps:
ꢀ. Make.sure.the.AC.adapter.cord.is.securely.connected.to.the.DC IN 9V.jack.and.a.standard.power.outlet.
2. Check.to.make.sure.the.battery.is.fully.charged..(If.you.don’t.see.the.“battery.full”.icon,.check.to.make.sure.
the.battery.is.properly.connected.and.charge.again.)
3. Change.the.dial.mode.
Changing the Dial Mode
Your.phone.can.communicate.with.the.telephone.network.in.two.different.ways:.tone.dialing.or.pulse.dialing..These.
days,.most.base.networks.use.a.method.called.tone.dialing,.so.your.phone.comes.programmed.for.tone.dialing..If.
your.phone.company.uses.pulse.dialing,.you.will.need.to.change.your.phone’s.dial.mode..If.you.don’t.get.a.dial.tone.
or.can’t.connect.to.the.telephone.network,.please.follow.the.steps.below.to.modify.your.phone’s.settings:
ꢀ. Press.[Menu/Select]..Select.the.GLOBAL.SETUP.menu,.and.then.the.
DIAL.MODE.submenu.
2. Scroll.[ ].to.highlight.PULSE.
3. Press.[Menu/Select]. You will hear a confirmation tone.
If.you.ever.need.to.change.the.dial.mode.back.to.tone.dialing,.follow.the.same.procedure,.but.select.TONE.in.step.2.
Note:. If.you.have.multiple.bases,.select.the.base.before.changing.the.dial.mode.(see.Selecting.the.Base.on..
NOW YOU ARE READY TO USE YOUR PHONE!
ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Wall Mounting the Base
This.phone.can.be.mounted.on.any.standard.wall.plate.
Insert the two hooks on the
wall mount adapter into the
holes on the upper rear of
the base. Slide the adapter
up as far as it will go
Gently press in
on the tabs at
the bottom of the
adapter. Slide
the bars under
the hooks on the
base.
(about 1/4 of an inch).
Route the telephone cord through the hole of
the wall mount adapter, and plug the
telephone cord into the telephone wall jack.
Route the cord.
Wall plate
Connect the
telephone cord
into the TEL
LINE jack.
Connect the AC adapter
to the DC IN 9V jack and
let the cord hang below
the wall mount adapter.
(To AC outlet)
Download from Www.Somanuals.coꢀmꢀ. All Manuals Search And Download.
Wall plate
Slide the base down
to lock it into place.
Place the
mounting slots
over the pins on
the wall plate.
(To AC outlet)
Notes:
• DO.NOT.use.an.AC.outlet.controlled.by.a.wall.switch.
• To.mount.the.phone.directly.on.the.wall,.insert.two.#ꢀ0.screws.(minimum.length.of.ꢀ.3/8.inches,.not.supplied).into.
the.wall,.3.ꢀ5/ꢀ6.inches.apart;.leave.the.screw.heads.ꢀ/8.inch.away.from.the.wall.to.allow.room.for.mounting.the.
phone..Be.sure.the.wall.is.capable.of.supporting.the.weight.of.the.phone,.and.use.the.proper.type.of.anchoring.
device.for.the.wall.material..No.need.to.route.the.telephone.cord.through.the.hole.of.the.wall.mount.adapter.when.
mounting.directly.on.the.wall.
ꢀ2
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Overview
Features
• ꢀ.9GHz.DECT6.0.Expandable.System
• Expands.up.to.6.Handsets
• Integrated.Digital.Answering.System
• Caller.ID/Call.Waiting
• Store.30.Caller.ID.Numbers.on.Base.&.each.Handset
• Speakerphone.on.Base.&.Handset
• 7.Ringer.Options.on.Handset.(3.Tones/4.Melodies)
• Last.5.Number.Redial
• Base.Keypad
• Bilingual.Menu.Displays.
(for.US.models:.English.and.Spanish,.
for.Canadian.models:.English.and.French)
• Advanced.Phonebook.Features:
• Store.70.Phonebook.Entries.on.Base.&.each.
Handset
• Call.Transfer
• Conferencing
• Intercom
• Alphabetical.Search
• Personalized.Ring.by.Party.(on.Handset)
• Transfer.Single.Listing.or.Entire.Phonebook
Answering System Features
• Digital.Tapeless.Recording
• Day.and.Time.Announcement
• Remote.Message.Retrieval
• Toll.Saver
• Up.to.ꢀ4.Minutes.of.Recording.Time
• Call.Screening
• Personal.or.Pre-recorded.Outgoing.Messages
• Message.Alert
• Bilingual.Voice.Prompts..
• Records.Up.to.59.messages
(for.US.models:.English.and.Spanish,.
for.Canadian.models:.English.and.French)
ꢀ3
Download from Www.Somanuals.com. All Manuals Search And Download.
Terminology Used in this Manual
The.handset.and.the.base.are.not.in.use..If.the.handset.is.on.the.cradle.or.[ /flash].or.[
].on.the.base.is.not.pressed,.no.line.has.been.activated..No.dial.tone.is.present..
].on.the.handset.or.
Standby
[
Caller.ID.is.available.from.your.Telephone.provider.and.is.offered.to.users.on.a.subscription.basis.
With.this.service,.you.will.be.able.to.see.the.incoming.caller.information.such.as.name.and.phone.number..
CID
CID/CW or
CIDCW
Caller.ID.with.Call.Waiting.is.available.by.subscription.from.your.Telephone.provider.
With.this.service,.you.will.be.able.to.view.incoming.caller.information.while.on.a.call.with.another.user.
Base
The.main.part.of.the.phone.that.connects.to.your.phone.line.and.lets.you.make.and.receive.calls.
A.cradle.that.comes.with.an.accessory.handset.and.charges.the.handset.battery.
It.connects.to.power.but.does.not.connect.to.a.phone.line.
Charger
Accessory
Handsets
Additional.handsets.that.can.register.to.the.base,.allowing.you.to.add.handsets.without.connecting.another.
phone.line..This.base.supports.a.total.of.six.cordless.handsets;.see.page.22.for.Compatible.Handsets.
This.term.relates.to.feature.settings.that.will.apply.to.all.registered.handsets.and.the.base.
These.features.are.available.by.selecting."GLOBAL.SETUP".in.the.handset.or.the.base.menu..Only.one.
handset.or.the.base.can.change.global.settings.at.a.time,.and.you.have.to.make.sure.the.phone.is.not.
currently.being.used..If.you.have.multiple.bases,.the.different.bases.have.each.global.settings;.select.the.base.
Global
Settings
Station
Talk
Any.handset.or.the.base.
A.telephone.line.has.been.activated.on.the.handset.or.base,.enabling.a.dial.tone...
Manual Conventions
This.manual.uses.several.different.type.styles.to.help.you.distinguish.between.different.parts.of.the.phone:
• Bold.text.with.“[ ]”.indicates.a.key.or.button.on.the.phone
• ALL CAPITALS indicates text on the display, such as menu options, prompts, and confirmation messages
• lower case bold.text.indicates.a.status.light.on.the.phone
• ALL CAPITALS BOLD.indicates.a.connection.jack.on.the.base.or.charger
ꢀ4
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts of the Phone
The.following.illustrations.show.you.all.of.the.different.parts.of.your.phone.
Handset
new message LED
Headset
jack cover
Handset earpiece
Belt clip hole
Handset display (LCD)
Speakerphone
speaker and
ringer
[Menu/Select] key
/Mute] key (messages/mute)
[ ] key (caller ID/right)
[Clear/Int’com] key
(clear/intercom)
[
[
] key (up)
[ /Flash] key (talk/flash)
[ ] key (end call)
[
] key (phonebook/left)
[
] key (down)
Handset battery
compartment
[#] key
[ /tone] key
[Redial/Pause] key
[
] key (speaker)
Handset microphone
Handset charging contacts
ꢀ5
Download from Www.Somanuals.com. All Manuals Search And Download.
Base
[Menu/Select] key
Base display (LCD)
[Clear/Mute] key
[Redial/Pause] key
[
/
] key
(phonebook/repeat/left)
[
[
] key (up)
] key
Base
speaker
/
(caller ID/skip/right)
[
] key (down)
[
] key and LED (play/stop)
Base
charging
contacts
[Answer on/off] key
(answering system on/off)
[Flash] key
[
] key and LED (speaker)
Base microphone
[Int'com] key (intercom)
charge LED
[ /tone] key
[#] key
[
] key (delete)
ꢀ6
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Interface
Reading the Display
Handset
In standby
During a call
Handset ID and banner
Call duration
Number of new
Caller ID calls received
Base
Status of your
answering system
Status of your
answering system
In standby
During a call
Answer ON OFF
Answer ON OFF
Day of the week
and time
Number of new
Caller ID calls received
Call duration
Message counter
Message counter
The.ringer off.icon.indicates.that.the.ringer.is.turned.off.
The.voice mail.icon.appears.when.you.have.messages.waiting.in.your.voice.mailbox.
The.privacy.icon.appears.when.the.Privacy.Mode.is.turned.on.
The.speaker.icon.appears.when.the.speaker.phone.is.in.use.
The.mute.icon.appears.while.the.microphone.is.muted.
The.battery.icon.indicates.the.handset.battery.status:.full,.medium,.low,.and.empty.
ꢀ7
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Four-way Function Key
Your.handset.and.base.have.a.four-way.function.
key.that.allows.you.to.move.the.cursor.or.pointer.
on.the.display.and.access.the.most.commonly.
used.features.at.the.touch.of.a.button..By.moving.
this.key.to.the.left,.you.open.the.phonebook..
Move.the.key.to.the.right.to.access.Caller.ID.
information..To.use.this.four-way.key,.place.your.
thumb.over.the.key.on.the.station.and.move.to.the.
four.positions.to.get.the.feel.of.how.it.moves.and.
operates.
Up
View the
phonebook
View the
Caller ID
Four-way
Function Key
Down
Using the Handset and Base Menus
To.open.the.menu,.press.[Menu/Select]..Highlight.the.option.you.want.by.pressing.the.four-way.function.key..This.
will.move.the.cursor;.the.option.currently.highlighted.has.a.triangle.beside.it..Activate.the.highlighted.option.by.
pressing.[Menu/Select]..To.go.back.to.the.previous.screen,.press.[left].on.the.four-way.function.key..To.exit.the.
menu.and.return.to.standby,.press.[ ].on.the.handset.or.[
].on.the.base.
If.you.do.not.press.a.key.within.thirty.seconds,.the.phone.will.time.out.and.exit.the.menu..When.setting.the.day.and.
time,.the.time-out.period.is.extended.to.two.minutes.
Note:. For.ANSW..SETUP,.GLOBAL.SETUP,.DAY.&.TIME.and.REGISTER.HANDSET.(base.only).menu.options,.
make.sure.the.line.is.not.in.use.and.the.handsets.are.within.range.of.the.base.
ꢀ8
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering Text from Your Phone
You.can.use.the.number.keypad.on.your.handset.or.base.to.enter.text.by.referring.to.the.letters.printed.on.each.
number key. When you press the number key in a text entry field, the phone displays the first letter printed on the
number.key..Press.the.number.key.twice.to.display.the.second.letter.and.three.times.to.display.the.third..Capital.
letters are displayed first, then lower case letters, and then the number on the key.
If two letters in a row use the same number key, enter the first letter, then use [right] on.the.four-way.function.key.to.
move.the.cursor.to.the.next.position.to.enter.the.second.letter..
For.example,.to.enter.the.word.“Movies”:.
ꢀ) Press.[6].once.to.enter.M.
2) Use.[right].on.the.four-way.function.
key.to.move.the.cursor.to.the.right.
3) Press.[6].six.times.to.enter.o.
4) Press.[8].six.times.to.enter.v.
5) Press.[4].six.times.to.enter.i.
6) Press [3] five times to enter e.
7) Press.[7].eight.times.to.enter.s.
8) Press.[Menu/Select].to.end.your.text.
entry.
If.you.make.a.mistake.while.entering.a.
name,.use.[right] or.[left] on.the.four-
way.function.key.to.move.the.cursor.to.the.
incorrect.character..Press.[Clear/Int’com].on.the.handset.or.[Clear/Mute].on.the.base.to.erase.the.wrong.character,.
and.then.enter.the.correct.character..To.delete.all.characters,.press.and.hold.[Clear/Int’com].on.the.handset.or.
[Clear/Mute].on.the.base.
Note:. When.you.enter.the.text.on.the.handset,.you.can.also.use.[#].to.move.the.cursor.to.right.and.[ /tone].to.
*
move.the.cursor.to.left.
ꢀ9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Setup
Selecting a Language
Each.station.supports.two.languages:.English.and.Spanish.for.US.models.or.English.and.French.for.Canadian.
models..Once.you.select.a.language,.the.menus.on.the.station.will.display.in.that.language..The.default.language.is.
English.
ꢀ) Press.[Menu/Select]...
Select.the.HANDSET.SETUP.or.BASE.
SETUP.menu,.and.then.the.HANDSET.
LANGUAGE.or.BASE.LANGUAGE.submenu.
2) Move.the.cursor.to.choose.a.language..
for US models:..
Choose.ENGLISH.or.ESPAÑOL.(Spanish)..
for Canadian models:..
Choose.ENGLISH.or.FRANÇAIS.(French).
3) Press.[Menu/Select]...
You will hear a confirmation tone.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Activating Personal Ring (Handset only)
You.can.assign.special.ringer.tones.to.anyone.in.your.phonebook..When.your.phone.gets.a.call,.it.looks.up.the.
Caller.ID.information.in.your.phonebook..If.you’ve.assigned.a.personal.ringer.to.that.number,.the.phone.uses.it.so.
you.know.who.is.calling..To.turn.the.personal.ringing.on.or.off,.follow.these.steps:
ꢀ) Press.[Menu/Select]..Select.the.HANDSET.SETUP.menu,.and.then.
the.PERSONAL.RING.submenu.
2) Move.the.cursor.to.select.ON.or.OFF.
3) Press.[Menu/Select]. You will hear a confirmation tone.
Activating the Key Touch Tone
Key.Touch.Tone.is.the.tone.your.keypad.makes.when.keys.are.pressed..You.can.turn.this.tone.on.or.off.
ꢀ) Press.[Menu/Select]..Select.the.HANDSET.SETUP.or.BASE.SETUP.
menu,.and.then.the.KEY.TOUCH.TONE.submenu.
2) Move.the.cursor.to.select.ON.or.OFF.
3) Press.[Menu/Select]. You will hear a confirmation tone.
2ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Expanding Your Phone
Adding Accessory Handsets
Your.phone.supports.a.total.of.six.cordless.handsets..You.can.now.place.a.fully-featured.cordless.handset.anywhere.
AC.power.is.available.to.connect.the.handset.charger..All.the.handsets.ring.when.a.call.is.received.
Compatible Handsets
Your.phone.is.compatible.with.the.DCX200..If.you.purchased.an.accessory.handset.separately,.you.must.register.the.
handset.to.the.base.before.use..Accessory.handsets.will.not.operate.until.they.are.registered.
Charging Accessory Handsets
The.handset’s.battery.recharges.automatically.when.the.handset.is.placed.in.the.charger..
Use.only.the.Uniden.PS-0007.AC.adapter.
ꢀ) Use.the.supplied.AC.adapter.to.connect.the.DC
Route the cord.
IN 9V.jack.to.a.standard.ꢀ20V.AC.outlet.
2) Set.the.charger.on.a.desk.or.tabletop,.and.
place.the.handset.in.the.charger.with.the.LCD.
screen.facing.forward.
3) Make.sure.that.the.charge.LED.illuminates..If.
the.LED.does.not.illuminate,.check.to.see.that.
the.AC.adapter.is.plugged.in.and.the.handset.
makes.good.contact.with.the.charging.contacts.
4) Charge.the.handset.battery.pack.for.at.least.ꢀ5-
20.hours.before.using.your.new.handset.for.the.
first time.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Registering Accessory Handsets
If.you.purchase.an.accessory.handset,.you.need.to.register.the.handset.before.use..Handset(s).supplied.in.the.box.
with.the.base.are.pre-registered.at.the.factory..When.charged,.pre-registered.handsets.display.a.handset.ID.number..
Handsets.that.have.not.been.registered.display:
..↔..
To.register.a.DCX200.accessory.handset:
ꢀ) Charge.the.handset.for.ꢀ5-20.hours.
2) Place.the.handset.in.the.main.telephone.base.cradle.to.initiate.registration..HANDSET.REGISTERING.will.
appear.in.the.LCD..
3) Wait.approximately.thirty.seconds,."REGISTRATION.COMPLETE".will.be.displayed.to.indicate.the.handset.has.
been.registered.to.the.base.and.a.handset.ID.will.be.automatically.assigned.
If.REGISTRATION.FAILED.appears.in.the.LCD,.please.try.these.steps.again.
Note:. If.an.accessory.handset.has.ever.been.registered.to.a.base,.you.must.reset.the.handset.before.you.can.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Multiple Bases
The.handsets.supplied.with.your.phone.(or.any.DCX200.accessory.handsets).can.be.registered.to.a.total.of.four.
different.bases..Compatible.bases.include.the.DECT2060,.DECT2080,.DECT2085,.and.DECT2088.models..Once.
your.handset.is.registered.to.more.than.one.base,.you.can.set.the.handset.to.search.automatically.the.available.
base,.or.you.can.select.manually.which.base.the.handset.should.connect.to.(for.example,.if.you.have.one.base.with.
an.answering.machine,.you.can.tell.the.handset.to.connect.that.base.to.check.messages)..
Registering the Handset to Another Base
ꢀ) Make.sure.the.handset.battery.is.fully.charged.
2) To.register.a.handset.to.DECT2060.or.DECT2080.base:
• Disconnect.the.base.AC.adapter..Then.press.and.hold.[find hs].while.you.reconnect.the.adapter..
Keep.pressing.[find hs].until.the.charge.LED.starts.to.blink.
To.register.a.handset.to.DECT2085.or.DECT2088.base:
• With.the.phone.in.standby,.press.[Menu/Select].on.the.base..Move.the.cursor.to.select.the.REGISTER.
HANDSET.menu,.and.then.press.[Menu/Select]..HANDSET.REGISTERING.will.appear.
3) On.the.handset,.Press.[Menu/Select]..Select.the.REGISTER.BASE.menu..HANDSET.REGISTERING.will.
appear.in.the.display.
4) Wait.approximately.thirty.seconds..“REGISTRATION.COMPLETE”.will.be.displayed.to.indicate.the.handset.has.
been.registered.to.the.base.and.a.handset.ID.will.be.automatically.assigned.
If.REGISTRATION.FAILED.appears.in.the.LCD,.please.try.these.steps.again.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Base
When.your.handset.is.registered.to.another.base,.it.will.automatically.connect.to.the.base..A.base.ID.(that.is.for.the.
handset.only).will.be.assigned.in.the.order.of.registration..You.can.either.select.a.base.you.want.to.use.manually,.or.
set.to.AUTO..If.you.set.to.AUTO,.when.the.handset.comes.out.of.range,.it.searches.automatically.the.available.base.
in.order.of.base.ID.
ꢀ) With.the.phone.in.standby,.press.[Menu/Select]..Select.the.HANDSET.SETUP.menu,.and.then.the.SELECT.
BASE.submenu.
2) Move.the.cursor.to.select.the.base.you.want.to.connect.to,.or.choose.AUTO.to.have.the.handset.automatically.
select.the.base.
3) Press.[Menu/Select]..SEARCHING.will.appear.in.the.display.
4) When.the.base.is.found,.the.handset.will.return.to.standby..If.the.base.is.not.found,.“SEARCHING”.continues.
to appear. You can repeat the procedure listed above to return back to the original connection or to find the
different.base.
Notes:.•.You.cannot.change.bases.during.a.call..
• To confirm which bases the handset is registered to, open the SELECT BASE submenu and use [ ].and..
[
].to.scroll.through.the.list..Press.[ ].to.close.the.list.and.return.to.standby.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Phonebook
Your.handset.and.base.can.store.up.to.seventy.names.and.numbers.in.your.phonebook..When.all.the.phonebook.
entries.are.full,.you.will.hear.a.beep.and.MEMORY.FULL.appears..You.cannot.store.any.additional.names.and.
numbers.unless.you.delete.some.of.the.existing.ones.
You.can.also.use.the.phonebook.entries.to.store.a.group.of.numbers.(up.to.twenty.digits).that.you.may.need.to.enter.
once.your.call.connects..This.is.referred.to.as.chain.dialing..See.Chain.Dialing.from.the.Phonebook.on.page.34.
Creating Phonebook Entries
To.store.names.and.numbers.in.your.phonebook,.please.follow.these.steps:
ꢀ) When.the.phone.is.in.standby.mode,.press.[ ].(on.the.left.side.of.the.four-way.key).
2) To.create.a.new.phonebook.entry,.press.[Menu/Select]..Select.the.
CREATE.NEW.menu..EDIT.NAME.appears..
3) Enter the name for this entry (EDIT NAME)..
Use.the.keypad.to.enter.a.name.for.this.entry;.the.name.can.contain.up.to.sixteen.characters..(See.Entering.
Text.from.Your.Phone.on.page.ꢀ9.for.instructions.on.entering.text.).If.you.do.not.want.to.enter.a.name.for.this.
entry,.your.phone.will.store.this.entry.as.<NO.NAME>..Press.[Menu/Select] when you are finished.
4) Enter the number for this entry (EDIT NUMBER).
Once.you.have.stored.a.name,.EDIT.NUMBER.appears.next..Use.the.
number.keypad.to.enter.the.phone.number;.the.phone.number.can.contain.
up.to.twenty.digits..If.you.need.the.phone.to.pause.between.digits.when.it’s.
dialing.(for.example,.to.enter.an.extension.or.an.access.code),.press.[Redial/
Pause].to.insert.a.two-second.pause..You.will.see.a.P.in.the.display..You.can.
also.use.more.than.one.pause.together.if.two.seconds.is.not.long.enough..
Each.pause.counts.as.one.digit..Press.[Menu/Select] when you are finished.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
5) Assign a personal ring tone for this entry (PERSONAL RING) (Handset only).
You.can.attach.a.special.ring.tone.to.each.phonebook.entry.on.the.handsets;.
the.phone.will.use.this.ring.tone.when.this.person.calls..Use.[ ].and.[ ]..to.
select.one.of.the.seven.different.ring.tone.options.(see.Selecting.a.Ring.Tone
you.will.hear.a.sample.of.each.tone.(unless.the.handset.ringer.volume.is.set.
to.off)..When.you.hear.the.ring.tone.you.want.to.use,.press.[Menu/Select]..If.
you.do.not.want.to.use.a.personal.ring.tone.for.this.phonebook.entry,.choose.
NO.SELECTION;.the.phone.will.use.your.standard.ring.tone.setting.
6) You will hear a tone confirming that the new entry has been stored, and DONE! appears in the display.
Finding a Phonebook Entry
Press.[ ].to.open.the.phonebook..Phonebook.entries.are.stored.in.alphabetical.order..To.scroll.through.the.
phonebook.from.A.to.Z,.press.[ ]..To.scroll.trough.the.phonebook.from.Z.to.A.press.[ ].
You.can.also.use.the.letters.on.the.number.keys.to.jump.to.a.name.that.starts.with.that.letter..For.example,.to.search.
for.an.entry.beginning.with.the.letter.M,.press.[6] once. The phonebook jumps to the first entry that begins with the
letter.you.entered;.you.can.then.use.[ ].and.[ ].to.scroll.to.other.entries.
To.close.the.phonebook.and.return.to.standby,.press.[ ].on.the.handset.or.[
a.phonebook.entry.during.a.call.and.want.to.close.the.phonebook,.press.[ ].again.instead.of.[ ].or.[
].on.the.base..If.you.are.looking.up.
].
Editing an Existing Phonebook Entry
ꢀ) When.the.phone.is.in.standby,.press.[ ].to.open.the.phonebook.
2) Find.the.entry.you.want.to.edit.and.press.[Menu/Select].
3) Select.EDIT..Follow.the.steps.for.Creating.Phonebook.Entries.on.page.26..If.you.do.not.wish.to.change.the.
information.at.any.step,.simply.press.[Menu/Select].to.go.to.the.next.step.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Caller ID or Redial Numbers in the Phonebook
You.can.store.Caller.ID.records.or.redial.numbers.in.the.phonebook.so.you.can.use.them.later..Go.to.the.Caller.ID.or.
redial.list.and.select.the.number.you.want.to.store..(If.the.Caller.ID.information.did.not.include.the.number,.then.you.
will.not.be.able.to.store.it.)
ꢀ) When.the.phone.is.in.standby,.press.[ ].to.open.the.Caller.ID.list.or.[Redial/Pause].to.open.the.redial.list.
2) Use.[ ].and.[ ] .to.scroll.through.the.Caller.ID.records.or.redial.numbers..When.you.come.to.the.information.
you.want.to.store,.press.[Menu/Select]..
3) Select.STORE.INTO.PB..EDIT.NAME.appears..If.the.phone.number.is.already.stored.in.memory,.you.will.hear.a.
beep, and THIS DATA IS ALREADY SAVED! appears in the display. The number will not be stored.
Deleting a Single Phonebook Entry
ꢀ) When.the.phone.is.in.standby,.press.[ ].
2) Find.the.entry.that.you.want.to.delete.and.press.[Menu/Select]..
3) Select.DELETE..DELETE.ENTRY?.appears.in.the.display.
4) Move.the.cursor.to.select.YES.
5) Press.[Menu/Select]. You will hear a confirmation tone, and DELETED! appears in the display.
Deleting all Phonebook Entries
ꢀ) When.the.phone.is.in.standby,.press.[ ].
2) Press.[Menu/Select],.and.then.select.DELETE.ALL..DELETE.ALL?.appears.in.
the.display.
3) Move.the.cursor.to.select.YES.
4) Press.[Menu/Select]. You will hear a confirmation tone, and DELETED! .
appears.in.the.display.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying Phonebook Entries to Another Station
You.can.transfer.phonebook.entries.from.one.station.to.another.without.having.to.re-enter.names.and.numbers..You.
can.transfer.one.phonebook.entry.at.a.time.or.all.phonebook.entries.at.once.
ꢀ) When.the.phone.is.in.standby,.press.[ ]..
2) To copy one entry, find the phonebook entry you want to copy. Press [Menu/Select],.and.then.select.COPY..
To.copy.all.entries,.press.[Menu/Select],.and.then.select.COPY.ALL.
3) Move.the.cursor.to.select.the.station.which.you.want.to.transfer.the.entries.to.and.then.press.[Menu/Select].
.
If.you.select.COPY.ALL,.ARE.YOU.SURE?.appears.on.the.display.screen..Move.the.cursor.to.select.YES,.and.
then.press.[Menu/Select].
4) The.phonebook.entries.will.be.transferred.to.the.designated.station..During.the.copy.process,.the.receiving.
station.shows.RECEIVING.and.the.ID.of.the.sending.station.
5) When the transfer is completed, DONE! appears on the station.
.
•.If.your.phonebook.contains.seventy.entries,.you.cannot.store.any.new.phonebook.entries..You.will.hear.a.
beep,.and.NOT.ENOUGH.MEMORY.IN.RECEIVING.UNIT.appears.on.the.display..If.the.selected.station.is.
out.of.range.or.data.transfer.is.cancelled,.UNAVAILABLE.appears.in.the.display..Phonebook.listings.will.not.
be.transferred.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Voice Mail Service
If.you.subscribe.to.a.voice.mail.service,.you.can.use.your.phone.to.access.your.voice.mailbox..The.new message.
LED on the handset flashes and .appears.in.the.handset.and.base.display.whenever.you.have.messages.waiting.
in.your.voice.mailbox..When.you.subscribe.to.the.service,.your.voice.mail.provider.provides.you.with.the.access.
number.and.the.required.voice.mail.signaling.tone..You.can.use.your.phonebook.to.store.the.access.number.
Resetting the Voice Message Waiting Indicator
When.you.receive.a.new.voice.mail.message,.the.new message LED on the top of the handset flashes and
appears.in.the.handset.and.base.display..In.the.event.your.message.alert.tone.gets.out.of.sync.with.your.phone.
company’s.voice.messaging.system,.you.can.reset.back.to.its.original.“no.messages.waiting”.state.
..
ꢀ) On.the.base,.press.[Menu/Select]..Select.the.GLOBAL.SETUP.menu,.and.then.the.VMWI.RESET.submenu.
2) Move.the.cursor.to.select.YES.or.NO.
3) Press.[Menu/Select]. You will hear a confirmation tone.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Phone
Changing the Handset Banner (Handset only)
Each.handset.will.display.a.banner.name.once.it.is.registered.to.the.base..The.default.banner.is.Handset.#ꢀ,.
Handset.#2,.etc..You.can.change.the.name.your.phone.displays.by.changing.the.banner.display..If.you.have.more.
than one handset, the banner name identifies your handset.
ꢀ) Press.[Menu/Select]..Select.the.HANDSET.SETUP.menu,.and.then.the.BANNER.submenu.
2) Use.the.keypad.to.enter.or.edit.the.banner.name..(See.Entering.Text.from.Your.Phone.on.page.ꢀ9.for.detailed.
instructions.on.entering.text.)
3) Press.[Menu/Select]. You will hear a confirmation tone.
Note:.. When.you.have.multiple.bases.and.even.if.the.handset.ID.is.changed.when.you.switch.to.a.different.base,.
the.handset.will.keep.the.banner.name.
Fur.Elise.(ELISE)
Flicker
Clatter
Wake.Up
Selecting a Ring Tone (Handset only)
You.may.choose.from.four.melodies.or.three.tones.for.your.
phone’s.primary.ring.tone..Each.handset.can.use.a.different.
ring.tone.or.melody..The.available.ring.tones.are.as.listed:
We.Wish.You.A.Merry
Christmas.(MERRY-XMAS)
Aura.Lee.(AURA.LEE)
Star.Spangled.Banner
(STAR.SPNGL)
Tones
Melodies
ꢀ) Press.[Menu/Select]..Select.the.HANDSET.SETUP.
menu,.and.then.the.RINGER.TONES.submenu.
2) Move.the.cursor.to.select.a.ring.tone..As.each.ring.tone.is.highlighted,.you.will.
hear.a.sample.(unless.the.handset.ringer.volume.is.set.to.off).
3) When.you.hear.the.tone.you.want.to.use,.press.[Menu/Select]..You.will.hear.a.
confirmation tone.
3ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Activating AutoTalk (Handset only)
AutoTalk.allows.you.to.answer.the.phone.simply.by.picking.up.the.handset.from.the.cradle..You.do.not.have.to.press.
a.button.to.answer.the.call.
ꢀ) Press.[Menu/Select]..Select.the.HANDSET.SETUP.menu,.and.then.the.
AUTOTALK.submenu.
2) Move.the.cursor.to.select.ON.or.OFF.
3) Press.[Menu/Select]. You will hear a confirmation tone.
Activating Any Key Answer (Handset only)
Any.Key.Answer.allows.you.to.answer.the.phone.by.pressing.any.key.on.the.dial.pad..
ꢀ) Press.[Menu/Select]..Select.the.HANDSET.SETUP.menu,.and.then.the.ANY.KEY.
ANSWER.submenu.
2) Move.the.cursor.to.select.ON.or.OFF.
3) Press.[Menu/Select]. You will hear a confirmation tone.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your Phone
From a handset
speakerphone
From the base speakerphone
From a cordless handset
ꢀ) Pick.up.the.handset.from.
ꢀ) Pick.up.the.handset.from.
the.cradle.
the.cradle.
ꢀ) Press.[ ].
2) Press.[ /Flash].
2) Press.[ ].
2) Listen.for.the.dial.tone.
3) Dial.the.number.
3) Listen.for.the.dial.tone.
4) Dial.the.number.
3) Listen.for.the.dial.tone.
4) Dial.the.number.
Making
a call
OR
OR
OR
ꢀ) Dial.the.Number.
ꢀ) Pick.up.the.handset.from.
ꢀ) Pick.up.the.handset.from.
the.cradle.
the.cradle.
2) Press.[ ].
2) Dial.the.number.
2) Dial.the.number..
3) Press.[ /Flash].
3) Press.[ ].
ꢀ) Pick.up.the.handset..(If.
AutoTalk.is.on,.the.phone.
will.answer.when.you.pick.
up.the.handset.from.the.
cradle.)
ꢀ) Pick.up.the.handset..
Answering
a call
Press.[ ].
2) Press.[ ].
2) Press.[ /Flash]..(If.Any.Key.
Answer.is.on,.you.can.also.
press.any.key.on.the.dial.
pad.)
Hanging
up
Press.[ ].
Press.[ ].or.return.the.handset.to.the.cradle.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Making a Call from the Phonebook
ꢀ) When.the.phone.is.in.standby,.press.[ ].to.open.the.phonebook.
3) Press.[ /Flash].or.[ ].on.the.handset.or.[ ].on.the.base.to.dial.the.number.
Note:. You.can.also.press.[ /Flash].or.[ ].on.the.handset.or.[ ].on.the.base.before.you.open.the.phonebook..
When.you.come.to.the.phone.number.you.want.to.dial,.press.[Menu/Select].
Chain Dialing from the Phonebook
If.you.often.have.to.enter.a.series.of.digits.or.some.type.of.code.number.during.a.call,.you.can.save.that.code.
number.to.a.phonebook.entry...When.your.call.connects,.just.use.the.phonebook.to.transmit.the.saved.code.number..
(This.is.referred.to.as.chain.dialing.).
ꢀ) Enter.the.code.number.(up.to.twenty.digits).into.the.phonebook.(see.Creating.Phonebook.Entries.on.page.26)..
Be.sure.to.enter.the.code.number.into.the.phonebook.exactly.as.you.would.enter.it.during.a.call..
2) During.a.call,.when.you.hear.the.prompt.that.tells.you.to.enter.the.code.number,.press.[ ].
3) Use.[ ].or.[ ].to.select.the.phonebook.entry.that.contains.the.digits.you.want.to.send.
4) Press.[Menu/Select]..The.phone.sends.the.digits.of.the.code.number.exactly.as.you.saved.them.in.the.
phonebook.entry.
Switching to the Handset Speakerphone During a Call
To.switch.a.normal.call.to.the.speakerphone,.press.[ ].on.the.handset..To.switch.from.a.speakerphone.call.to.a.
normal.call,.press.[ ].
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Caller ID, Call Waiting, and Redial Lists
If.you.subscribe.to.Caller.ID.service.from.your.phone.company,.your.phone.will.show.you.the.caller’s.phone.number.
and.name.(if.available).whenever.a.call.comes.in..If.you.subscribe.to.Caller.ID.on.Call.Waiting,.the.phone.will.also.
show.you.the.name.and.the.number.of.any.call.that.comes.in.while.you’re.on.the.line.
Using the Caller ID List
You.can.store.up.to.thirty.Caller.ID.numbers.in.each.station..Caller.ID.records.are.
stored.from.newest.to.oldest..Once.your.Caller.ID.list.is.full,.the.oldest.record.will.be.
automatically.deleted.when.a.new.call.is.received.
To.open.the.Caller.ID.list,.press.[ ].(on.the.right.side.of.the.four-way.key)..The.
phone.will.show.the.number.of.new.Caller.ID.records.and.the.total.number.of.stored.
records..Use.[ ].and.[ ] .to.scroll.through.the.list..
Making a Call from a Caller ID Record
ꢀ) When.the.phone.is.in.standby,.press.[ ].to.open.the.Caller.ID.list.
2) Use.[ ].and.[ ] to find the Caller ID record you want to dial.
3) If.you.need.to.add.(or.delete).a.“ꢀ”.to.the.beginning.of.the.displayed.phone.number,.press.[ /tone]..If.you.need.
*
to.add.(or.delete).the.stored.area.code,.press.[#].
4) Press.[ /Flash].or.[ ].on.the.handset.or.[ ].on.the.base.to.dial.the.number.
Note:. You.can.also.press.[ /Flash].or.[ ].on.the.handset.or.[ ].on.the.base.before.you.open.the.caller.ID.list..
When.you.come.to.the.phone.number.you.want.to.dial,.press.[Menu/Select].
What’s This “Add or Delete a 1” About?
• Any phone number in the Caller ID records might (or might not!) have a “1” at the front, depending on how
different.phone.companies.send.the.Caller.ID.information..
• The.phone.dials.the.number.exactly.as.it.appears.in.the.Caller.ID.record..
• If.the.phone.number.is.a.long.distance.or.toll.call,.but.the.Caller.ID.record.does.not.have.a.“ꢀ”.in.front.of.the.
number,.press.[ /tone].to.add.it..
*
35
Download from Www.Somanuals.com. All Manuals Search And Download.
• If.the.phone.number.is.a.local.or.non-toll.call,.but.the.Caller.ID.record.has.a.“ꢀ”.in.front.of.the.number,.press..
[ /tone].to.delete.it.
*
Seven-Digit Dialing
If.you.can.make.a.local.call.by.dialing.only.seven.digits.instead.of.ten,.you.can.tell.the.phone.to.hide.your.local.area.
code.in.the.Caller.ID.list;.any.calls.from.outside.your.area.code.will.show.all.ten.digits..
To.program.your.local.area.code:
ꢀ) Press.[Menu/Select]..Select.the.GLOBAL.SETUP.menu,.and.then.the.AREA.CODE.submenu.
2) Use.the.number.keypad.([0].through.[9]).to.enter.a.three-digit.area.code..If.an.area.code.has.already.been.
stored,.it.appears.in.the.display..Press.[Clear/Int’com].on.the.handset.or.[Clear/Mute].on.the.base.to.delete.the.
stored.code,.and.then.enter.a.new.one.
3) Press.[Menu/Select]. You will hear a confirmation tone. The setting applies to all registered handsets and the
base.
The phone uses the stored area code as a filter. When a call comes in, the phone compares the incoming area code
to.the.code.programmed.on.the.phone..If.the.two.codes.match,.the.station.hides.the.area.code.in.the.Caller.ID.list.
When.you.are.viewing.a.Caller.ID.record,.you.can.show.the.hidden.area.code.by.pressing.[#]..Press.[#].again.to.
hide.the.area.code..When.you.dial.from.a.Caller.ID.record.or.store.a.Caller.ID.record.in.the.phonebook,.the.phone.
dials.or.stores.the.digits.exactly.as.they.appear.on.the.display..If.you.need.to.use.ten.digits,.be.sure.to.press.[#].to.
show.the.area.code.before.you.dial.or.store.the.number..See.page.28.to.store.a.Caller.ID.record.in.the.phonebook.
Deleting Caller ID Numbers
To.delete.only.one.Caller.ID.number,.press.[ ] when the phone is in standby, and then find the number you want to
delete..Press.[Menu/Select] and select DELETE ENTRY. When the phone asks you to confirm, select YES.
To.delete.all.the.Caller.ID.numbers,.press.[ ].when.the.phone.is.in.standby,.and.then.press.[Menu/Select]..When.
the phone asks you to confirm, select YES.
Notes:.•.When.you.delete.a.Caller.ID.number,.you.delete.it.permanently.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
.
•.Caller.ID.numbers.are.stored.separately.in.each.station..Deleting.a.record.from.one.station.will.not.delete.
the.record.from.any.other.stations.
Using Call Waiting
If.you.have.Call.Waiting.service.and.a.second.call.comes.in.when.you.are.on.the.phone,.a.call.waiting.tone.will.sound..
Press.[ /Flash].on.the.handset.or.[Flash].on.the.base.to.accept.the.waiting.call..There.is.a.short.pause,.and.then.you.
will.hear.the.new.caller..To.return.to.the.original.caller,.press.[ /Flash].on.the.handset.or.[Flash].on.the.base.
Note:.You.must.subscribe.to.Call.Waiting.service.for.this.feature.to.operate..Not.all.features.are.available.in.all.areas.
Redialing a Number
You can quickly redial the last five numbers dialed on each station.
ꢀ) When.the.phone.is.in.standby,.press.the.[Redial/Pause].to.open.the.redial.list.
2) Use.[ ].and.[ ].or.[Redial/Pause].to.scroll.through.the.redial.list.
3) When you find the number you want to dial, press [ /Flash].or.[ ].on.the.handset.or.[ ].on.the.base.
Notes: • If the number exceeds 32 digits, only the first 32 digits are retained in redial memory.
.
.
•.If.the.redial.memory.is.empty,.EMPTY.appears.in.the.display.and.you.will.hear.a.beep.
•.You.can.also.press.[ /Flash].or.[ ].on.the.handset.or.[ ].on.the.base.before.you.open.the.redial.list..
When.you.come.to.the.phone.number.you.want.to.dial,.press.[Menu/Select].
Deleting a Redial Record
If.you.want.to.delete.a.phone.number.from.the.redial.list,.follow.the.steps.below:
ꢀ) When.the.phone.is.in.standby,.press.[Redial/Pause].
2) Use.[ ].and.[ ].to.scroll.through.the.redial.list.
3) When you find the redial number you want to delete, press [Menu/Select].and.select.DELETE.ENTRY.
4) When the phone asks you to confirm, select YES. The redial number is deleted.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Ringer, Earpiece and Speaker Volume
Adjusting the Ringer Volume
You.can.choose.from.four.ringer.volume.settings.(off,.low,.medium,.and.high).
separately.on.each.handset.or.the.base.
ꢀ) With.the.phone.in.standby,.press.[ ].or.[ ]..The.display.shows.the.current.
volume.level.and.the.station.sounds.the.ringer.at.that.level..
2) Use.[ ].to.make.the.ringer.volume.louder.or.[ ].to.make.it.softer.or.turn.it.
completely.off.
3) When.you.hear.the.ringer.volume.level.you.want.to.use,.stop.pressing.keys..
The.station.will.use.the.new.ringer.volume.starting.with.the.next.incoming.call.
Note:. If.you.set.the.ringer.volume.to.OFF,.the.station.won’t.ring..The.other.stations.will.ring.according.to.their.
individual.settings.
Muting the Ringer (One call only)
While.the.phone.is.ringing,.press.[ /Mute].or.[ ].on.the.handset,.or.[Clear/Mute].or.[
].on.the.base.to.mute.the.
ringer.for.this.call..The.phone.will.ring.again.on.the.next.call.
Adjusting the Earpiece Volume
You.can.choose.from.six.volume.levels.for.the.handset.earpiece..To.adjust.the.earpiece.volume.while.on.a.call,.
press.[ ].(to.make.it.louder).or.[ ].(to.make.it.softer)..The.handset.display.shows.the.current.volume.level.for.the.
earpiece.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Speaker Volume
Handset Speaker:.You.can.choose.from.six.volume.levels.for.the.handset.speaker.while.on.a.speakerphone.call.or.
when.the.handset.is.accessing.the.answering.system..To.adjust.the.handset.speaker.volume,.press.[ ].(to.make.it.
louder).or.[ ].(to.make.it.softer)..The.handset.display.shows.the.current.volume.level.for.the.handset.speaker.
Note:. The.handset.earpiece.and.the.handset.speaker.have.separate.volume.settings.
Base Speaker:.You.can.choose.from.ten.volume.levels.for.the.base.speaker.while.on.a.speakerphone.call.or.when.
the.answering.system.announces.or.plays.a.message..To.adjust.the.base.speaker.volume,.press.[ ].(to.make.it.
louder).or.[ ].(to.make.it.softer)..The.base.display.shows.the.current.volume.level.for.the.base.speaker.
Adjusting the Audio Tone (Handset only)
If you aren’t satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on
a.call..Your.phone.gives.you.three.audio.tone.options:.low,.natural.and.high;.the.default.setting,.Natural.Tone,.is.
recommended.for.hearing.aid.users..Audio.tone.adjustments.only.apply.to.the.earpiece,.not.the.speakerphone.
To.adjust.the.audio.tone:
ꢀ) While.on.a.call,.press.[Menu/Select].
2) Move.the.cursor.to.select.AUDIO.TONE,.and.then.press.[Menu/Select].
3) Move.the.cursor.to.select.desired.option.(HIGH.TONE,.NATURAL.TONE,.or.LOW.TONE),.and.then.press.
[Menu/Select]..Selected.option.appears.in.the.display.for.two.seconds,.and.then.the.display.returns.to.normal.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Finding a Lost Handset
To.locate.a.misplaced.handset,.press.[Int’com].on.the.base.when.the.phone.is.in.standby..Use.[ ].or.[ ].to.
select.the.handset.you.want.to.page,.and.then.press.[Menu/Select]..Select.ALL.to.page.all.registered.handsets..
To.cancel.paging,.press.[Int’com].on.the.base.again.
Note:.. Handsets.that.are.not.currently.connected.to.this.base.will.not.be.paged.
Using Hold, Conference and Transfer
Placing a Call on Hold
ꢀ) During.a.call,.press.[Clear/Int’com].on.the.handset.or.[Int’com].on.the.base.to.place.the.caller.on.hold..If.you.
leave.a.caller.on.hold.for.more.than.ten.seconds,.the.display.screen.will.read,.Line.On.Hold.
2) To.return.to.the.party.on.hold,.press.[ /Flash].or.[ ].on.the.handset.or.[ ].on.the.base..The.phone.will.return.
to.the.holding.party.
Notes: • You can only place a caller on hold for five minutes. Once five minutes has passed, that party’s line will be
disconnected.and.the.phone.will.return.to.standby.
.
•.While.a.call.is.on.hold,.Caller.ID.and.Call.Waiting.cannot.be.received.
Conferencing
If.you.have.more.than.one.handset,.up.to.four.people.can.participate.in.a.conference.call..A.four-way.conference.call.
consists.of.an.outside.line,.two.handsets,.and.the.base.speakerphone..You.can.easily.join.a.call.already.in.progress..
ꢀ) Press.[ /Flash].or.[ ].on.the.handset.or.[ ].on.the.base.to.join.the.call.
2) To.hang.up,.return.the.handset.to.the.cradle.or.press.[ ].on.the.handset.or.[ ].on.the.base..The.other.party.
will.still.be.connected.to.the.call.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring a Call
You.can.transfer.a.call.from.one.station.to.another..The.handsets.must.be.currently.connected.to.the.same.base.(see.
ꢀ) During.a.call,.press.[Clear/Int’com].on.the.handset.or.[Int’com].on.the.base.
2) Use.[ ].or.[ ].to.select.the.station.you.want.to.transfer.the.call.to,.and.then.press.[Menu/Select]..Select.ALL.
to.page.all.other.stations..The.call.will.automatically.be.placed.on.hold,.and.a.paging.tone.sounds..To.cancel.the.
transfer,.press.[ /Flash].or.[ ].on.the.handset.or.[ ].on.the.base.
3) When.another.station.accepts.the.transferred.call,.you.will.be.disconnected..If.you.want.to.rejoin.the.call,.press..
[ /Flash].or.[ ].on.the.handset.or.[ ].on.the.base.again.
Answering a Transferred Call
When.a.station.receives.a.call.transfer,.it.sounds.a.paging.tone;.stations.also.show.the.ID.of.the.station.that.is.
paging..To.accept.the.call.transfer:
ꢀ) To.answer.the.page.and.speak.to.the.transferring.station,.press.[ /Flash].or.[Clear/Int’com].on.the.handset,.or..
[
].or.[Int’com].on.the.base.
2) To.accept.the.call.and.speak.to.the.caller,.press.[ /Flash].on.the.receiving.handset,.or.[ ].on.the.receiving.
base.
3) When.you.accept.the.transferred.call,.the.transferring.station.will.be.disconnected.
Only the first station.to.answer.the.transfer.page.will.be.connected.to.the.call..If.the.transfer.page.is.not.picked.up.
within.one.minute,.the.operation.will.be.canceled.
4ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Special Features
Privacy Mode
If.you.don’t.want.other.stations.to.interrupt.you.while.on.a.call,.turn.on.privacy.mode..As.long.as.your.station.
is.in.privacy.mode,.other.stations.can’t.join.your.call.or.make.any.calls.of.their.own:.their.displays.will.show.
UNAVAILABLE.
ꢀ) While.on.a.call,.press.[Menu/Select].
2) Select.CALL.PRIVACY..PRIVACY.MODE.ON.appears.in.the.display.for.two.seconds;. .appears.and.remains.in.
the.display.until.the.feature.is.turned.off.
To.turn.privacy.mode.off,.repeat.the.procedure.listed.above..PRIVACY.MODE.OFF.appears.
Using the Intercom
You.can.use.the.intercom.to.talk.to.another.station.without.using.the.phone.line..The.handsets.must.be.currently.
Making an Intercom Page
ꢀ) When.the.phone.is.in.standby,.press.[Clear/Int’com].on.the.handset.or.[Int’com].on.the.base.
2) Use.[ ].or.[ ].to.select.the.station.you.want.to.talk.with,.and.then.press.[Menu/Select]..Select.ALL.to.page.
all.other.stations.
3) To.cancel.the.intercom.page,.press.[ ].on.the.handset.or.[Int’com].on.the.base.
Note:. Intercom.paging.will.be.cancelled.if.any.of.the.following.things.occur:
• You.receive.an.outside.call.or.an.intercom.page.while.selecting.the.other.station.
• You.do.not.select.a.station.within.thirty.seconds.
• Your.handset.is.out.of.range.(OUT.OF.RANGE.appears.in.the.display).
• The.party.does.not.answer.the.page.within.one.minute.
• The.party.is.busy.
• The.party.is.out.of.range.(UNAVAILABLE.appears.in.the.display).
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering an Intercom Page
When.the.intercom.page.tone.sounds,.the.display.will.show.the.ID.of.the.station.that.is.paging.
ꢀ) Press.[ /Flash].or.[Clear/Int’com].on.the.handset,.or.[ ].or.[Int’com].on.the.base..If.AutoTalk.is.on,.the.
handset.will.automatically.answer.the.page.when.you.pick.up.the.handset.from.the.cradle.
2) To.hang.up.an.intercom.call,.press.[ ].on.the.handset.or.[Int’com].on.the.base.
Muting the Microphone
Mute.turns.off.the.microphone.so.the.caller.can’t.hear.you..This.only.works.while.you.are.on.a.call..
ꢀ) Press.[ /Mute].on.the.handset.or.[Clear/Mute].on.the.base..MUTE.ON.and. .appear.in.the.display;. .remains.
while.muting.is.on.
2) To.cancel.muting,.press.[ /Mute].on.the.handset.or.[Clear/Mute].on.the.base.again..MUTE.OFF.appears.
Tone Dialing Switch Over
If.your.phone.is.set.to.pulse.dialing,.you.can.temporarily.switch.to.tone.dialing.after.the.call.connects..This.feature.
is.useful.when.you.need.tone.dialing.to.use.automated.menu.systems,.such.as.telephone.bank.tellers,.telephone.
prescription refills, customer support menus, etc. Make your call normally. Once your call connects, press [ /tone].
*
on.the.station..Any.digits.you.enter.from.then.on.will.be.sent.with.tone.dialing..When.this.particular.call.ends,.the.
phone.automatically.returns.to.pulse.dialing.
See.Changing.the.Dial.Mode.on.page.ꢀ0.for.instructions.on.setting.your.phone.for.pulse.or.tone.dialing.
Installing the Optional Headset
Your.phone.may.be.used.with.an.optional.headset..To.use.this.feature,.insert.the.headset.plug.into.
the.headset.jack..Your.phone.is.ready.for.hands-free.conversations..(Headsets.may.be.purchased.
by.calling.the.Uniden.Parts.Department..See.inside.the.back.cover.page.for.contact.information.)
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Answering System
Using Handset and Base Menus
You.can.set.up.your.answering.system’s.primary.features.from.the.base.or.handset.
ꢀ) When.the.phone.is.in.standby,.press.[Menu/Select]..Move.the.pointer.to.select.the.ANSW..SETUP.menu,.and.
then.press.[Menu/Select]..
2) Use.[ ].or.[ ].to.scroll.through.the.answering.system.setup.menu.options..
3) Select.the.option.by.pressing.[Menu/Select].
4) To.exit.the.menu.and.return.to.standby,.press.[ ].on.the.handset.or.[
].on.the.base.
Handset Operation
Your.handset.controls.all.of.the.answering.system.setup.options.except.for.the.personal.greeting.(personal.greetings.
must.be.changed.directly.at.the.base)..Here.are.some.hints.on.using.your.handset.to.access.your.answering.system:.
• If.you.have.multiple.bases,.select.the.base.with.answering.system.you.want.to.access.(see.page.25).
• When.the.phone.is.in.standby,.press.[ /Mute].on.the.handset.to.access.the.answering.system..REMOTE.
ANSWERING.MACHINE.OPERATION.appears.on.the.handset.display,.and.the.system.announces.the.time.and.
the.number.of.new.and.old.messages.
• If.you.receive.a.call,.remote.operation.is.cancelled.
• If.another.handset.makes.a.call,.remote.operation.is.cancelled.
• During.remote.operation.HANDSET.REMOTE.MODE.appears.on.the.base.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Personal Greeting
Your.answering.system.comes.with.a.pre-recorded.outgoing.message.or.greeting.that.plays.when.you.receive.a.
call:.“Hello,.no.one.is.available.to.take.your.call..Please.leave.a.message.after.the.tone.”.You.can.record.your.own.
personal.outgoing.greeting..Your.recorded.greeting.must.be.between.two.seconds.and.thirty.seconds.long.
ꢀ) On.the.base,.press.[Menu/Select]..Select.the.ANSW..SETUP.menu,.and.then.the.RECORD.GREETING.
submenu.
2) RECORD.GREETING,.START.[SELECT].appears..Press.[Menu/Select].to.start.the.recording..Begin.recording.
after.the.announcement.
The.message counter.on.the.base.LCD.displays.“30”,.and.then.begins.to.count.down.
3) When you finish recording, press [Menu/Select].again.or.press.[
]. You will hear a confirmation tone, and
your.recorded.greeting.plays.back.for.you.
Selecting a Greeting
Once.you.have.recorded.a.personal.greeting,.the.phone.automatically.switches.to.your.personal.greeting..You.can.
also.switch.back.and.forth.between.the.pre-recorded.greeting.and.your.own.greeting.at.any.time.
ꢀ) On.the.base,.press.[Menu/Select]..Select.the.ANSW..SETUP.menu,.and.then.the.GREETING.OPTIONS.
submenu..
The.system.plays.the.current.greeting.
2) To.keep.this.greeting,.do.nothing.
3) To.switch.to.the.other.greeting,.press.[
].or.[
].on.the.four-way.function.key.while.the.system.is.playing.the.
current.greeting.
4) Each.time.you.press.[
].or.[
],.the.system.switches.between.the.pre-recorded.and.the.personal.greeting..
The.last.greeting.you.hear.is.used.as.the.current.greeting.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting Your Personal Greeting
You.can.delete.your.personal.greeting.from.the.base..You.cannot.delete.the.pre-recorded.greeting.
ꢀ) On.the.base,.press.[Menu/Select]..Select.the.ANSW..SETUP.menu,.and.then.the.GREETING.OPTIONS.
submenu..
The.system.plays.the.current.greeting.
2) While.the.personal.greeting.is.playing,.press.[ ].
3) The.system.announces.“Greeting.has.been.deleted,”.and.switches.back.to.the.pre-recorded.greeting.
Selecting the Language for Announcements
You.can.select.the.language.of.your.answering.system.announcements..The.default.system.language.is.English.
ꢀ) Press.[Menu/Select]..Select.ANSW..SETUP,.and.then.the.ANSW..LANGUAGE.submenu.
2) Move.the.cursor.to.choose.a.language..
for.US.models:.Choose.ENGLISH.or.ESPAÑOL.(Spanish)..
for.Canadian.models:.Choose.ENGLISH.or.FRANÇAIS.(French).
3) Press.[Menu/Select]. You will hear a confirmation tone.
Setting the Number of Rings
The.ring.time.setting.allows.you.to.set.the.number.of.rings.the.caller.hears.before.your.answering.system.plays.the.
outgoing.message..You.can.set.the.ring.time.to.answer.after.two,.four,.or.six.rings..If.you.enable.the.Toll.Saver.(TS).
setting,.the.answering.system.picks.up.after.two.rings.if.you.have.new.messages,.and.after.four.rings.if.there.are.
none..This.way,.if.you.make.a.long.distance.call.to.check.your.messages,.you.can.hang.up.after.the.third.ring.to.
avoid.long.distance.billing.charges.
ꢀ) Press.[Menu/Select]..Select.the.ANSW..SETUP.menu,.and.then.the.RING.TIME.submenu.
2) Move.the.cursor.to.select.a.ring.time.(TOLL.SAVER,.2.TIMES,.4.TIMES,.or.6.TIMES).
3) Press.[Menu/Select]. You will hear a confirmation tone.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Day & Time (for Base)
If.you.do.not.set.the.clock.on.your.answering.system,.your.messages.may.not.have.the.correct.time.and.day.stamp..
ꢀ) Press.[Menu/Select].
2) Move.the.cursor.to.DAY.&.TIME.and.press.[Menu/Select].
3) Use.[ ] and.[ ].to.select.the.day.of.the.week,.and.press.[Menu/Select].
4) Use.the.number.keypad.([0].through.[9]).to.enter.the.hour.and.minutes.
5) Use.[ ] and.[ ].to.select.AM.or.PM,.and.press.[Menu/Select]. You hear a confirmation tone.
Notes:.•.The.handset.does.not.display.the.day.and.time,.although.you.can.set.up.the.day.and.time.from.the.handset.
.
•.When.the.power.of.the.base.is.off,.the.day.and.time.setting.will.be.erased;.you.need.to.set.up.again.
Setting the Record Time (or Announce only)
You.can.choose.how.long.callers.have.to.record.a.message..Set.the.record.time.to.ꢀ.MINUTE.or.4.MINUTES.to.limit.
the.time.for.incoming.messages..If.you.set.the.record.time.to.ANNOUNCE.ONLY,.the.answering.system.answers.the.
call.but.prevents.callers.from.leaving.a.message.
ꢀ) Press.[Menu/Select]...Select.the.ANSW..SETUP.menu,.and.then.the.RECORD.TIME.submenu.
2) Move.the.cursor.to.select.a.record.time.(ꢀ.MINUTE,.4.MINUTES,.or.ANNOUNCE.ONLY).
3) Press.[Menu/Select]. You will hear a confirmation tone.
While.your.answering.system.is.set.to.ANNOUNCE.ONLY,.the.message counter.on.the.base.LCD.displays.“A.”.If.
you.are.using.the.prerecorded.greeting,.the.system.automatically.switches.to.the.following.message:.“Hello,.no.one.
is.available.to.take.your.call..Please.call.again.”.If.you.are.using.a.personal.greeting,.the.system.continues.to.use.
that.greeting.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Activating the Message Alert
The message alert feature sounds a short alert tone every fifteen seconds whenever you have a new message.
To.turn.on.the.message.alert:
ꢀ) Press.[Menu/Select]..Select.the.ANSW..SETUP.menu,.and.then.the.MESSAGE.ALERT.submenu.
2) Move.the.cursor.to.select.ON.or.OFF.
3) Press.[Menu/Select]. You will hear a confirmation tone.
Activating Call Screening on the Base
Your.phone.allows.you.to.listen.to.callers.leaving.you.a.message..The.call.screen.feature.on.the.base.can.be.turned.
on.or.off.
ꢀ) Press.[Menu/Select]..Select.the.ANSW..SETUP.menu.and.then.the.CALL.SCREEN.submenu.
2) Move.the.cursor.to.select.ON.or.OFF.
3) Press.[Menu/Select]. You will hear a confirmation tone.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Answering System
Turning Your Answering System On and Off
From the base
From the handset
ꢀ) When.the.phone.is.in.standby,.press.
ꢀ) Press.[Menu/Select]..Select.the.ANSW..
SETUP.menu,.and.then.the.ANSWER.
SETUP.submenu.
[Answer on/off].
2) The.system.announces.“Answering.System.
Turning.On
is.on”.and.plays.the.current.greeting.
2) Move.the.cursor.to.select.ON.
3) ANSWER.ON.appears.on.the.base.display.
3) Press.[Menu/Select]..You.will.hear.a.
confirmation tone.
ꢀ) When.the.phone.is.in.standby,.press.
ꢀ) Press.[Menu/Select]..Select.the.ANSW..
SETUP.menu,.and.then.the.ANSWER.
SETUP.submenu.
[Answer on/off].
2) The.phone.announces.“Answering.System.
Turning.Off
is.off.”
2) Move.the.cursor.to.select.OFF.
3) ANSWER.OFF.appears.on.the.base.display.
3) Press.[Menu/Select]..You.will.hear.a.
confirmation tone.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Reviewing Messages
The.message counter.on.the.base.LCD.displays.the.number.of.messages.stored.in.memory..When.you.have.new.
messages,.[
].on.the.base.and.the.new message LED on the handset flash. The answering system plays your
new messages first. After you listen to all of your new messages, you can then play your old messages. You can
review.your.messages.from.the.base.or.from.the.handset:
From the base
From the handset
Press.[ /Mute]..The.system.announces.the.
number.of.new.and.old.messages,.plays.the.
message,.and.then.announces.the.time.and.day.
it.was.received.
Press.[
]..The.system.announces.the.number.
of.new.and.old.messages,.plays.the.message,.
and.then.announces.the.time.and.day.it.was.
received.
Playing.
messages
If.you.want.to.restart.playing.your.messages.
after.you.stop.the.playback,.press.[2].
Press [
current.message..Press.[
back.to.a.previous.message..
].once.to.go.to.the.beginning.of.the.
Press.[1].once.to.go.to.the.beginning.of.the.
current.message..Press.[1].repeatedly.to.go.
back.to.a.previous.message.
Repeating
a.message
].repeatedly.to.go.
Skipping
a.message message..
Press.[
].to.go.to.the.beginning.of.the.next.
Press.[3].to.go.to.the.beginning.of.the.next.
message.
Deleting
While.a.message.is.playing,.press.[ ]...
While.a.message.is.playing,.press.[4].
a.message The.message.is.permanently.deleted..
The.message.is.permanently.deleted..
Not.available.
While.the.phone.is.in.standby,.press.[ ]...When.
Deleting.all.
the system asks you to confirm, press [ ].again..
messages
All.messages.are.permanently.deleted.
Ending.the.
message.
review
Press.[5]..to.stop.the.message.playback.
Press.[ ].to.exit.the.system.and.return.to.
standby.
Press.[
return.to.standby..
].to.stop.the.message.playback.and.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Screening Calls
If.you.activate.the.call.screening.feature.on.the.base,.you.can.listen.to.callers.leaving.a.message.without.answering.
the.call.(see.Activating.Call.Screening.on.the.Base.on.page.48)..You.can.always.hear.callers.from.the.base.speaker..
To.screen.an.incoming.call.from.the.handset.speaker:
• Press.[ /Mute].when.the.system.is.answering..If.another.handset.is.screening.a.call,.you.will.hear.a.beep.and.
you.will.not.be.able.to.screen.the.call.
• To.answer.the.call,.press.[ /Flash].
• To.stop.screening.the.call,.press.[ ].
Turning Off the Message Alert Tone
When.all.new.messages.are.played.back,.the.message.alert.tone.will.automatically.deactivate..The.tone.will.not.
deactivate.until.all.new.messages.are.played.back..To.quickly.turn.off.the.tone,.press.any.key.on.the.base.
Operating the Answering System While You Are Away from Home
When.you.are.away.from.home,.you.can.operate.your.answering.system.with.any.touch-tone.telephone.
Setting a Security Code or Personal Identification Number (PIN)
To.operate.your.answering.system.when.you.are.away.from.home,.you.will.need.to.enter.a.two-digit.security.code.or.
Personal Identification Number (PIN). The default security code is 80.
ꢀ) Press.[Menu/Select]..Select.the.ANSW..SETUP.menu,.and.then.the.SECURITY.CODE.submenu.
2) Use.the.number.keypad.([0].through.[9]).to.enter.a.two-digit.security.code.(0ꢀ-99).
3) Press.[Menu/Select]. You will hear a confirmation tone.
Dialing in to Your Answering System
Notes:
• The.answering.system.will.only.playback.messages.for.four.minutes.and.then.it.returns.to.the.command.waiting.
mode..To.continue.playing.your.messages,.press.[0].then.[2] again within fifteen seconds.
• If.you.enter.an.incorrect.security.code/PIN.three.times,.you.will.hear.a.beep.and.the.answering.system.will.return.
to.standby.
5ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
To.operate.from.a.remote.location,.use.any.touch-tone.telephone,.and.follow.these.steps:
ꢀ) Call.your.telephone.number.and.wait.for.the.system.to.answer..If.the.answering.system.is.off,.it.will.answer.after.
about.ten.rings.and.sounds.a.series.of.beeps.
2) During.the.greeting.or.the.beeps.(if.answering.system.is.off),.press.[0].and.enter.your.security.code/PIN.within.
two.seconds.
3) The.answering.system.announces.the.current.time.and.the.number.of.messages.stored.in.memory..
You.hear.“To.play.incoming.messages,.press.zero-two..For.help,.press.one-zero”.followed.by.a.beep.
4) Enter a remote command from the chart below. You have fifteen seconds to enter the first command; after the
first command, you have two seconds to enter each command.
Remote Commands
Command
[0].then.[1] Repeat.a.message*
[0].then.[2] Play.incoming.messages [0].then.[5] Stop.operation
[0].then.[3] Skip.a.message [0].then.[6] Answering.system.on
Function
Command
Function
Command
Function
[0].then.[4] Delete.a.message
[0].then.[9] Answering.system.off
[1].then.[0] Help
*.If.you.press.[0].then.[1] in the first four seconds of a message, the system skips to the previous message..
If.you.press.[0].then.[1] after the first four seconds of a message, the system repeats the current message.
5) When you finish, you will hear intermittent beeps indicating that the system is in the command waiting mode.
Enter another command from the chart within fifteen seconds.
6) Hang.up.to.exit.the.system..The.answering.system.automatically.returns.to.its.normal.standby.setting.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Specifications
Operating.Temperature
32°.F.to.ꢀ22°.F.(0°.C.to.50°.C)
Base:.PS-0009
Charger:.PS-0007
AC.Adapter.Part.Number
AC.Adapter.Input.Voltage
Base:.ꢀ20V.AC,.60.Hz
Charger:.ꢀ20V.AC,.60.Hz
AC.Adapter.Output.
Voltage
Base:[email protected]
Charger:[email protected]ꢀ0mA
Battery.Part.Number
Battery.Capacity
BT-ꢀ008
Notes:
• Use.only.the.supplied.AC.adapters.
• Be.sure.to.use.the.proper.adapter.for.the.base.and.any.chargers.
• Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or
electrical.hazard.
• Do.not.place.the.base.in.direct.sunlight.or.subject.it.to.high.temperatures.
Battery Information
Battery Life
With.average.use,.your.handset.battery.provides.approximately.ten.hours.of.talk.time.and.approximately.seven.
days.of.standby.time..You.can.achieve.optimum.battery.life.and.performance.by.returning.the.handset.to.the.base.
or.charger.after.each.use..When.your.handset.is.left.off.of.the.cradle,.the.battery.will.gradually.discharge.even.if.
the.handset.is.not.being.used..The.actual.talk.time.duration.will.be.reduced.in.proportion.to.the.amount.of.time.the.
handset.is.off.of.the.cradle.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Low Battery Alert
When.the.battery.pack.is.very.low,.the.phone.is.programmed.to.eliminate.functions.in.
order.to.save.power..When.LOW.BATTERY.appears.in.the.display.and.the.phone.is.in.
standby,.none.of.the.keys.will.operate..If.you.are.on.a.call,.complete.your.conversation.as.
quickly.as.possible,.and.return.the.handset.to.the.cradle.
The.battery.pack.needs.to.be.charged.when.the.empty.battery.icon.appears.
Cleaning the Battery Contacts
To.maintain.a.good.charge,.clean.the.charging.contacts.on.the.handset.
once.a.month..Dampen.a.cloth.with.plain.water..Gently.rub.the.damp.cloth.
over.the.charging.contacts.until.all.visible.dirt.is.removed..Dry.the.contacts.
thoroughly.before.returning.the.handset.to.the.cradle.
Caution: Do.not.use.paint.thinner,.alcohol,.or.other.chemical.products..
Doing so may discolor the surface of the telephone and damage the finish.
Battery Replacement and Handling
With.average.use,.your.phone’s.battery.should.last.approximately.one.year..To.order.replacement.batteries,.please.
contact.Uniden’s.Parts.Department..The.contact.information.is.listed.inside.the.back.cover.page.
Caution:
• Use.only.battery.pack.BT-ꢀ008..
• Do.not.remove.the.batteries.from.the.handset.to.charge.them..
• Never throw the battery into a fire, disassemble, or heat them.
• Do.not.remove.or.damage.the.battery.casing..
Power Failures
During.a.power.failure,.you.will.not.be.able.to.make.or.receive.calls.with.the.phone..To.avoid.damage.from.an.
electrical.spike.when.the.power.comes.back.on,.we.recommend.you.unplug.your.phone.during.power.outages.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Common Issues
If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve
your.problem,.please.call.our.Customer.Hotline.(see.the.inside.of.the.back.cover.for.contact.information).
When you have this
Try...
problem...
The.charge.LED.won’t.
illuminate.when.the.handset. • Re-seating.the.handset.in.the.cradle..
is.placed.in.the.cradle.
• Moving.the.handset.closer.to.the.base.
• Moving.the.handset.and/or.base.away.from.metal.objects.or.appliances.and.try.
The.audio.sounds.weak..
again.
• Checking.the.telephone.cord.connection..If.CHECK.TEL.LINE.appears.on.the.
• Disconnecting.the.base.AC.adapter..Wait.a.few.minutes,.then.reconnect.it.(see.
No.handsets.can.make.or.
receive.calls..
• Charging.the.battery.for.ꢀ5.to.20.hours.
• Moving.the.handset.closer.to.the.base.
• Making.sure.the.line.is.not.in.use..If.an.outside.call.is.already.using.a.line,.you..
cannot.use.that.line.to.make.another.outside.call.
A.single.handset.can’t.make.
or.receive.calls.(but.other.
handsets.can).
55
Download from Www.Somanuals.com. All Manuals Search And Download.
When you have this
problem...
Try...
A.handset.can.make.calls,.
but.it.doesn’t.ring.or.receive.
a.page.
• Keeping.all.handsets.away.from.microwave.ovens,.computers,.wireless.LAN.
station,.remote.control.toys,.wireless.microphones,.alarm.systems,.intercoms,.
• Moving.the.base.to.another.location.or.turn.off.the.source.of.interference.
Severe.noise.interference.
• Checking.to.see.if.the.call.was.placed.through.a.switchboard.
• Asking.your.telephone.company.to.verify.your.Caller.ID.service.is.current..There.
may.be.a.problem.with.your.Caller.ID.service.
The.Caller.ID.does.not.
display..
I.can’t.register.the.handset.at. • Charging.the.battery.for.ꢀ5.to.20.hours.
the.base.
The.handset.doesn’t.
communicate.with.other.
handsets..
• Register.all.handsets.to.the.same.base,.and.then.select.the.same.base.on.all.
• Checking.to.see.that.there.are.not.two.handsets.already.using.the.conference.
• Register.all.handsets.to.the.same.base,.and.then.select.the.same.base.on.all.
I.can’t.join.the.conversation.
not.work. Checking.to.see.that.the.message.record.time.is.not.set.to.announce.only.(see.
page.47)
•
.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
When you have this
problem...
Try...
The.answering.system.does. • The.memory.may.be.full..Delete.some.or.all.of.the.saved.messages.(see.page.
not.record.any.messages.
50).
The.answering.system.
doesn’t.say.what.time.
messages.were.recorded.
• The.incoming.messages.may.be.too.long..Ask.callers.to.leave.a.brief.message.
Messages.are.incomplete..
•
I.can’t.hear.base.or.handset.
speaker.during.call.screening.
or.message.playback.
I.can’t.access.answering.
system.from.a.remote.
phone..
• Checking.to.see.if.the.touch-tone.phone.you’re.using.can.transmit.the.tone.for.at.
least.two.seconds..If.it.cannot,.try.using.a.different.touch-tone.phone.
Resetting the Handset
You.may.need.to.reset.your.handset.in.the.following.instances:
• You.lose.a.handset.and.purchase.a.new.one.
• You.get.the.message.Registration.Failed.when.you.try.to.register.the.handset.
• You.are.unable.to.register.any.handsets.to.the.base.
• When.you.register.new.handsets.to.the.base,.the.handset.IDs.do.not.match..(For.example,.the.handset.registers.
as.“Handset.#4”.but.you.only.have.two.handsets.)
• When.you.are.instructed.to.by.one.of.Uniden’s.call.center.representatives.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
2) Press.and.hold.[ ].and.[#] for more than five seconds. Select DEREGISTER HS.
3) Select.the.handset.which.you.are.operating,.and.then.press.[Menu/Select].
4) The phone will ask you to confirm the deregistration. Select YES. The selected handset will clear its registration
information.only.from.the.base.it.is.currently.connected.to,.and.then.delete.the.link.to.the.base.from.its.own.
memory.
5) When.the.base.information.is.deleted,.the.handset.displays.HANDSET.NOT.REGISTERED-PLACE.HANDSET.
ON.BASE.TO.REGISTER..SEE.YOUR.OWNER'S.MANUAL.FOR.HELP.
If.the.handset.cannot.contact.the.base,.it.will.display.OUT.OF.RANGE..Make.sure.the.handset.is.in.range.of.the.
base.and.the.base.is.connected.to.power;.you.can.also.reset.the.handset.without.the.base.(see.the.next.section).
Resetting the Handset Without the Base
If.your.original.base.is.not.available.for.some.reason,.you.can.still.reset.the.handset.and.use.it.with.another.base.
ꢀ) Press.and.hold.[ ].and.[#] for at least five seconds.
2) Move.the.cursor.to.select.BASE.UNAVAILABLE.and.then.press.[Menu/Select].
3) Select.the.base.which.you.want.to.de-register.from,.and.then.press.[Menu/Select]..BASE.UNAVAILABLE.
appears.
4) Move.the.cursor.to.select.YES,.and.then.press.[Menu/Select]. You hear a confirmation tone, and the
handset.deletes.its.own.base.information.without.contacting.the.base..The.handset.displays.HANDSET.NOT.
REGISTERED-PLACE.HANDSET.ON.BASE.TO.REGISTER..SEE.YOUR.OWNER'S.MANUAL.FOR.HELP...
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Line Mode for Multiple Extensions
Line.mode.refers.to.the.method.that.telephones.use.to.signal.each.other.that.an.extension.is.in.use..Customer.
service.may.recommend.changing.the.line.mode.if.you.have.any.of.the.following.problems:
• Your.phone.keeps.ringing.after.someone.answers.on.an.extension.phone.
• Your.answering.system.doesn’t.stop.recording.when.you.answer.on.an.extension.phone.
• Caller ID displays briefly and then clears.
ꢀ) If.you.set.from.a.handset.and.you.have.multiple.bases,.select.the.base.that.is.having.problems.(see.page.25).
2) Press.[Menu/Select]..Select.the.GLOBAL.SETUP.menu,.and.then.the.SET.LINE.MODE.submenu..
3) IF.INSTRUCTED.BY.CUSTOMER.SERVICE.PRESS.[SELECT].appears..Press.[Menu/Select].
4) Move.the.cursor.to.select.TYPE.-.A,.TYPE.-.B,.or.OFF.
5) Press.[Menu/Select]. You will hear a confirmation tone.
Traveling Out of Range
During.a.call,.if.you.move.your.handset.too.far.from.your.base,.noise.may.increase..If.you.pass.the.range.limit.of.the.
base,.the.handset.will.beep,.display.OUT.OF.RANGE,.and.then.go.to.standby..The.base.will.maintain.the.connection.
for.thirty.seconds.after.the.handset.goes.out.of.range..If.you.move.the.handset.back.within.range.of.the.base.within.
thirty.seconds,.press.[ /Flash].or.[ ].to.pick.up.the.call.again.
Note:. If.it.is.set.to.automatically.select.the.available.base,.the.handset.will.begin.searching.for.another.base.thirty.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Liquid Damage
Moisture.and.liquid.can.damage.your.cordless.phone.
• If.the.handset.or.base.is.exposed.to.moisture.or.liquid,.but.only.the.exterior.plastic.housing.is.affected,.wipe.off.
the.liquid,.and.use.as.normal..
• If.moisture.or.liquid.has.entered.the.plastic.housing.(i.e..liquid.can.be.heard.in.the.phone.or.liquid.has.entered.the.
handset.battery.compartment.or.vent.openings.on.the.base),.follow.the.steps.below:
Handset
Base
ꢀ) Remove.the.battery.cover.and.leave.it.off.for.
ꢀ) Disconnect.the.AC.adapter.from.the.base,.cutting.
ventilation.
off.electrical.power.
2) Disconnect.the.battery.pack..Leave.the.battery.
cover.off.and.the.battery.pack.disconnected.for.at.
least.3.days.
2) Disconnect.the.telephone.cord.from.the.base.
3) Let.dry.for.at.least.3.days..
3) Once.the.handset.is.completely.dry,.reconnect.the.
battery.pack.and.the.battery.cover.
4) Recharge.the.handset’s.battery.pack.for.ꢀ5.to.20.
hours.before.using..
IMPORTANT:.You.must.unplug.the.telephone.line.while.recharging.the.battery.packs.to.avoid.charge.interruption.
CAUTION: DO NOT use a microwave oven to speed up the drying process. This will cause permanent
damage to the handset, base and the microwave oven. After following these steps, if your
cover page).
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning!
Precautions!
The.cords.on.this.product.and/or.accessories.contain.lead,.a.
chemical.known.to.the.State.of.California.to.cause.birth.defects.
or.other.reproductive.harm..Wash.hands.after.handling.
Before.you.read.anything.else,.please.observe.the.following:
Warning!
Uniden.America.Corporation.DOES.NOT.represent.this.unit.
to be waterproof. To reduce the risk of fire, electrical shock,
or.damage.to.the.unit,.DO.NOT.expose.this.unit.to.rain.or.
moisture..
Important Safety Instructions
When.using.your.telephone.equipment,.basic.safety.
precautions should always be followed to reduce the risk of fire,
electric.shock.and.injury.to.persons,.including.the.following:.
Rechargeable Nickel-Metal-Hydride
Battery Warning
ꢀ. Do.not.use.this.product.near.water,.for.example,.near.
a.bath.tub,.wash.bowl,.kitchen.sink.or.laundry.tub,.in.a.
wet.basement.or.near.a.swimming.pool..
•
•
•
This.equipment.contains.a.rechargeable.Nickel-Metal-
2. Avoid.using.a.telephone.(other.than.a.cordless.type).
during.an.electrical.storm..There.may.be.a.remote.risk.
of.electric.shock.from.lightning..
Hydride.battery..
The.rechargeable.batteries.contained.in.this.equipment.
may explode if disposed of in a fire.
Nickel.is.a.chemical.known.to.state.of.California.to.cause.
cancer..
3. Do.not.use.the.telephone.to.report.a.gas.leak.in.the.
vicinity.of.the.leak..
4. Use.only.the.power.cord.and.batteries.indicated.in.
this manual. Do not dispose of batteries in a fire. They
may.explode..Check.with.local.authorities.for.possible.
battery.disposal.instructions..
•
•
Do.not.short-circuit.the.battery..
Do.not.charge.the.rechargeable.battery.used.in.this.
equipment.in.any.charger.other.than.the.one.designed.to.
charge this battery as specified in the owner's manual.
Using.another.charger.may.damage.the.battery.or.cause.
the.battery.to.explode..
5. Do.not.disassemble.any.component.of.this.product.
SAVE THESE INSTRUCTIONS
CAUTION
Rechargeable.Batteries.Must.Be.Recycled.or.Disposed.of.
Risk.of.explosion.if.battery.is.replaced.by.an.incorrect.type..
Dispose.of.used.batteries.according.to.the.instructions..Do.not.
open.or.mutilate.the.battery,.and.disconnect.the.battery.before.
shipping.this.product.
Properly.
Uniden.works.to.reduce.lead.content.in.our.PVC.coated.cords.
in.our.products.and.accessories.
6ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Please.follow.instructions.for.repairing,.if.any.(e.g..battery.replacement.
section);.otherwise.do.not.substitute.or.repair.any.parts.of.the.device.
except as specified in this manual. Connection to party line service is
subject.to.state.tariffs..Contact.the.state.public.utility.commission,.public.
service.commission.or.corporation.commission.for.information..This.
equipment.is.hearing.aid.compatible.
The FCC Wants You To Know
This.equipment.complies.with.Part.68.of.the.FCC.rules.and.the.
requirements.adopted.by.the.ACTA..On.the.bottom.of.this.equipment.
is a label that contains, among other information, a product identifier
in.the.format.US:.AAAEQ##TXXXX..If.requested,.this.number.must.be.
provided.to.the.telephone.company.
An applicable Universal Service Order Codes (USOC) certification
for.the.jacks.used.in.this.equipment.is.provided.(i.e.,.RJꢀꢀC).in.the.
packaging.with.each.piece.of.approved.terminal.equipment..A.plug.
and.jack.used.to.connect.this.equipment.to.the.premises.wiring.and.
telephone.network.must.comply.with.the.applicable.FCC.Part.68.rules.
and.requirements.adopted.by.the.ACTA..A.compliant.telephone.cord.
and.modular.plug.is.provided.with.this.product..It.is.designed.to.be.
connected.to.a.compatible.modular.jack.that.is.also.compliant..See.
installation.instructions.for.details.
Should.you.experience.trouble.with.this.equipment,.please.contact.
Uniden.customer.service.at.800-297-ꢀ023..If.the.equipment.is.causing.
harm.to.the.telephone.network,.the.telephone.company.may.request.that.
you.disconnect.the.equipment.until.the.problem.is.resolved..
NOTICE:.According.to.telephone.company.reports,.AC.electrical.surges,.
typically.resulting.from.lightning.strikes,.are.very.destructive.to.telephone.
equipment.connected.to.AC.power.sources..To.minimize.damage.from.
these.types.of.surges,.a.surge.arrestor.is.recommended.
Changes or modifications to this product not expressly approved by
Uniden,.or.operation.of.this.product.in.any.way.other.than.as.detailed.by.
the.owner’s.manual,.could.void.your.authority.to.operate.this.product.
The.REN.is.used.to.determine.the.number.of.devices.that.may.be.
connected.to.a.telephone.line..Excessive.RENs.on.a.telephone.line.
may.result.in.the.devices.not.ringing.in.response.to.an.incoming.call..In.
most but not all areas, the sum of RENs should not exceed five (5.0).
To.be.certain.of.the.number.of.devices.that.may.be.connected.to.a.line,.
as.determined.by.the.total.RENs,.contact.the.telephone.provider..For.
products.approved.after.July.23,.200ꢀ,.the.REN.for.this.product.is.part.
of the product identifier that has the format US:AAAEQ##TXXXX. The
digits.represented.by.##.are.the.REN.without.a.decimal.point.(e.g.,.03.
is.a.REN.of.0.3)..For.earlier.products,.the.REN.is.separately.shown.on.
the.label.
This.device.complies.with.part.ꢀ5.of.the.FCC.rules..Operation.is.subject.
to.the.following.two.conditions:.(ꢀ).This.device.may.not.cause.harmful.
interference,.and.(2).This.device.must.accept.any.interference.received,.
including.interference.that.may.cause.undesired.operation..Privacy.of.
communications.may.not.be.ensured.when.using.this.phone.
To.insure.the.safety.of.users,.the.FCC.has.established.criteria.for.
the.amount.of.radio.frequency.energy.various.products.may.produce.
depending.on.their.intended.usage..This.product.has.been.tested.
and.found.to.comply.with.the.FCC’s.exposure.criteria..For.body.worn.
operation,.the.FCC.RF.exposure.guidelines.were.also.met.when.used.
with.the.Uniden.accessories.supplied.or.designed.for.this.product..Use.
of.other.accessories.may.not.ensure.compliance.with.FCC.RF.exposure.
guidelines.and.should.be.avoided.
If.this.equipment.causes.harm.to.the.telephone.network,.the.telephone.
company.will.notify.you.in.advance.that.temporary.discontinuance.
of.service.may.be.required..But.if.advance.notice.isn’t.practical,.the.
telephone.company.will.notify.the.customer.as.soon.as.possible..Also,.
you will be advised of your right to file a complaint with the FCC if you
believe.it.is.necessary...The.telephone.company.may.make.changes.in.
its.facilities,.equipment,.operations.or.procedures.that.could.affect.the.
operation.of.the.equipment..If.this.happens.the.telephone.company.will.
provide advance notice in order for you to make necessary modifications
to.maintain.uninterrupted.service.
The.antenna(s).used.for.the.base-unit.must.be.installed.to.provide.a.
separation.distance.of.at.least.20.cm.from.all.persons.and.must.not.
be.collocated.or.operated.in.conjunction.with.any.other.antenna.or.
transmitter.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Interference
I.C. Notice
Radio.interference.may.occasionally.cause.buzzing.and.
humming.in.your.cordless.handset,.or.clicking.noises.in.the.
base..This.interference.is.caused.by.external.sources.such.
as TV, refrigerator, vacuum cleaner, fluorescent lighting, or
electrical.storm..Your.unit.is.NOT.DEFECTIVE..If.these.noises.
continue.and.are.too.distracting,.please.check.around.your.
home.to.see.what.appliances.may.be.causing.the.problem..
In.addition,.we.recommend.that.the.base.not.be.plugged.into.
a.circuit.that.also.powers.a.major.appliance.because.of.the.
potential.for.interference..Be.certain.that.the.antenna.on.the.
unit.is.fully.extended.when.needed..In.the.unlikely.event.that.
you.consistently.hear.other.voices.or.distracting.transmissions.
on.your.phone,.you.may.be.receiving.radio.signals.from.
another.cordless.telephone.or.other.source.of.interference..
If.you.cannot.eliminate.this.type.of.interference,.you.need.to.
change.to.a.different.channel.
Finally,.it.should.be.noted.that.some.cordless.telephones.
operate.at.frequencies.that.may.cause.interference.to.nearby.
TVs.and.VCRs..To.minimize.or.prevent.such.interference,.the.
base.of.the.cordless.telephone.should.not.be.placed.near.or.on.
top.of.a.TV.or.VCR..If.interference.is.experienced,.moving.the.
cordless.telephone.farther.away.from.the.TV.or.VCR.will.often.
reduce.or.eliminate.the.interference..
Terminal Equipment
NOTICE:.This.equipment.meets.the.applicable.Industry.
Canada Terminal Equipment Technical Specifications. This is
confirmed by the registration number. The abbreviation, IC,
before the registration number signifies that registration was
performed.based.on.a.Declaration.of.Conformity.indicating.that..
Industry Canada technical specifications were met. It does not
imply.that.Industry.Canada.approved.the.equipment.
NOTICE:.The.Ringer.Equivalence.Number.(REN).for.this.
terminal.equipment.is.marked.on.the.equipment.itself..The.REN.
assigned.to.each.terminal.equipment.provides.an.indication.
of.the.maximum.number.of.terminals.allowed.to.be.connected.
to.a.telephone.interface..The.termination.on.an.interface.may.
consist.of.any.combination.of.devices.subject.only.to.the.
requirement.that.the.sum.of.the.Ringer.Equivalence.Numbers.
of all the devices does not exceed five.
Radio Equipment
The term “IC:” before the radio certification number only signifies
that Industry Canada technical specifications were met.
Cordless Telephone Privacy
Operation.is.subject.to.the.following.two.conditions:.(ꢀ).this.
device.may.not.cause.interference,.and.(2).this.device.must.
accept.any.interference,.including.interference.that.may.cause.
undesired.operation.of.the.device..“Privacy.of.communications.
may.not.be.ensured.when.using.this.telephone.”
Cordless.telephones.are.radio.devices..Communications.
between.the.handset.and.base.of.your.cordless.telephone.
are.accomplished.by.means.of.radio.waves.which.are.
broadcast.over.the.open.airways..Because.of.the.inherent.
physical.properties.of.radio.waves,.your.communications.can.
be.received.by.radio.receiving.devices.other.than.your.own.
cordless.telephone.unit..Consequently,.any.communications.
using.your.cordless.telephone.may.not.be.private.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
A.PARTICULAR.PURPOSE..THIS.WARRANTY.DOES.
NOT.COVER.OR.PROVIDE.FOR.THE.REIMBURSEMENT.
OR.PAYMENT.OF.INCIDENTAL.OR.CONSEQUENTIAL.
DAMAGES..
One Year Limited Warranty
Important:.Evidence.of.original.purchase.is.required.for.
warranty.service..WARRANTOR:.UNIDEN.AMERICA.
CORPORATION.(“Uniden”).ELEMENTS.OF.WARRANTY:.
Uniden.warrants,.for.one.year,.to.the.original.retail.owner,.
this.Uniden.Product.to.be.free.from.defects.in.materials.and.
craftsmanship.with.only.the.limitations.or.exclusions.set.out.
below..WARRANTY.DURATION:.This.warranty.to.the.original.
user.shall.terminate.and.be.of.no.further.effect.ꢀ2.months.
after.the.date.of.original.retail.sale..The.warranty.is.invalid.if.
the.Product.is.(A).damaged.or.not.maintained.as.reasonable.
or necessary, (B) modified, altered, or used as part of any
conversion kits, subassemblies, or any configurations not sold
by.Uniden,.(C).improperly.installed,.(D).serviced.or.repaired.by.
someone.other.than.an.authorized.Uniden.service.center.for.a.
defect.or.malfunction.covered.by.this.warranty,.(E)
Some.states.do.not.allow.this.exclusion.or.limitation.of.
incidental.or.consequential.damages.so.the.above.limitation.or.
exclusion.may.not.apply.to.you.
LEGAL REMEDIES: This warranty gives you specific legal
rights,.and.you.may.also.have.other.rights.which.vary.from.
state.to.state..This.warranty.is.void.outside.the.United.States.
of.America.and.Canada..PROCEDURE.FOR.OBTAINING.
PERFORMANCE.OF.WARRANTY:.If,.after.following.the.
instructions.in.the.owner’s.manual.you.are.certain.that.the.
Product.is.defective,.pack.the.Product.carefully.(preferably.
in.its.original.packaging)..Disconnect.the.battery.from.the.
Product.and.separately.secure.the.battery.in.its.own.separate.
packaging.within.the.shipping.carton..The.Product.should.
include.all.parts.and.accessories.originally.packaged.with.the.
Product..Include.evidence.of.original.purchase.and.a.note.
describing.the.defect.that.has.caused.you.to.return.it..The.
Product.should.be.shipped.freight.prepaid,.by.traceable.means,.
to.warrantor.at:.
used.in.any.conjunction.with.equipment.or.parts.or.as.part.of.
any.system.not.manufactured.by.Uniden,.or.(F).installed.or.
programmed.by.anyone.other.than.as.detailed.by.the.owner’s.
manual.for.this.product..STATEMENT.OF.REMEDY:.In.the.
event.that.the.product.does.not.conform.to.this.warranty.at.
any.time.while.this.warranty.is.in.effect,.warrantor.will.either,.
at.its.option,.repair.or.replace.the.defective.unit.and.return.
it.to.you.without.charge.for.parts,.service,.or.any.other.cost.
(except.shipping.and.handling).incurred.by.warrantor.or.its.
representatives.in.connection.with.the.performance.of.this.
warranty..Warrantor,.at.its.option,.may.replace.the.unit.with.
a.new.or.refurbished.unit..THE.LIMITED.WARRANTY.SET.
FORTH.ABOVE.IS.THE.SOLE.AND.ENTIRE.WARRANTY.
PERTAINING.TO.THE.PRODUCT.AND.IS.IN.LIEU.OF.
AND.EXCLUDES.ALL.OTHER.WARRANTIES.OF.ANY.
NATURE.WHATSOEVER,.WHETHER.EXPRESS,.IMPLIED.
OR.ARISING.BY.OPERATION.OF.LAW,.INCLUDING,.
BUT.NOT.LIMITED.TO.ANY.IMPLIED.WARRANTIES.OF.
MERCHANTABILITY.OR.FITNESS.FOR
Uniden America Service
4700.Amon.Carter.Blvd.
Fort.Worth,.TX.76ꢀ55
64
Download from Www.Somanuals.com. All Manuals Search And Download.
L
P
S
Language
Answering.system.
Personal identification number .
Storing.Caller.ID.or.redial.
T
M
Mute
V
W
R
Redial
Ringer
O
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Operation Card
CUT
CUT
REMOTE OPERATION CARD
REMOTE OPERATION CARD
Remote access
away from home
Remote access
away from home
Turn on the answering
system remotely
Turn on the answering
system remotely
1. Call your phone number from a
touch-tone phone.
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop the
announcement.
1. Call your phone number from a
touch-tone phone.
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop the
announcement.
2. During the outgoing message,
press 0 and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the voice prompts.
2. During the outgoing message,
press 0 and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the voice prompts.
4. Press 0 then 6 to turn the
answering system on.
4. Press 0 then 6 to turn the
answering system on.
3. To quit, hang up the phone.
3. To quit, hang up the phone.
CUT
CUT
REMOTE OPERATION CARD
REMOTE OPERATION CARD
Remote access
away from home
Remote access
away from home
Turn on the answering
system remotely
Turn on the answering
system remotely
1. Call your phone number from a
touch-tone phone.
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop the
announcement.
1. Call your phone number from a
touch-tone phone.
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop the
announcement.
2. During the outgoing message,
press 0 and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the voice prompts.
2. During the outgoing message,
press 0 and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the voice prompts.
4. Press 0 then 6 to turn the
answering system on.
4. Press 0 then 6 to turn the
answering system on.
3. To quit, hang up the phone.
3. To quit, hang up the phone.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
C U T
C U T
Task
Key
Task
Key
Repeat a Message
Repeat a Message
Play Incoming Messages
Skip a Message
Play Incoming Messages
Skip a Message
Delete a Message
Stop Operation
Delete a Message
Stop Operation
Answering System On
Answering System Off
Help
Answering System On
Answering System Off
Help
C U T
C U T
Task
Repeat a Message
Play Incoming Messages
Skip a Message
Key
Task
Repeat a Message
Play Incoming Messages
Skip a Message
Key
Delete a Message
Stop Operation
Delete a Message
Stop Operation
Answering System On
Answering System Off
Help
Answering System On
Answering System Off
Help
69
Download from Www.Somanuals.com. All Manuals Search And Download.
At Uniden, we’ll take care of you!
Thank you for purchasing a Uniden product. if you have any questions or problems, please do not return
this product to the place of purchase.
Having trouble?
Our customer care specialists are here to help you! Visit our web-site at
www.uniden.com.or.call.our.Customer.Service.Hotline.at..
1-800-297-1023.during.regular.business.hours.*
Need a part?
To.order.headsets,.accessory.handsets,.replacement.batteries,.or.other.
1-800-554-3988.during.regular.business.hours.*.
Help for our
customers with
special needs
If.you.need.special.assistance.due.to.a.disability.or.have.questions.on.the.
accessibility.features.of.this.product,.please.call..
1-800-874-9314 (voice.or.TTY).
*.Central.Standard.Time..Detailed.customer.service.hours.are.available.at.www.uniden.com.
May.be.covered.under.one.or.more.of.the.following.U.S..patents:
4,797,9ꢀ6
5,650,790
5,754,407
5,893,034
6,070,082
6,782,098
6,953,ꢀꢀ8
5,426,690
5,660,269
5,758,289
5,9ꢀ2,968
6,ꢀ25,277
6,788,920
7,023,ꢀ76
5,434,905
5,66ꢀ,780
5,768,345
5,9ꢀ5,227
6,253,088
6,788,953
7,030,8ꢀ9
5,49ꢀ,745
5,663,98ꢀ
5,787,356
5,929,598
6,3ꢀ4,278
6,839,550
7,ꢀ46,ꢀ60
5,493,605
5,67ꢀ,248
5,794,ꢀ52
5,930,720
6,4ꢀ8,209
6,889,ꢀ84
7,203,307
5,533,0ꢀ0
5,696,47ꢀ
5,80ꢀ,466
5,960,358
6,6ꢀ8,0ꢀ5
6,90ꢀ,27ꢀ
7,206,403
5,574,727
5,7ꢀ7,3ꢀ2
5,825,ꢀ6ꢀ
5,987,330
6,67ꢀ,3ꢀ5
6,907,094
5,58ꢀ,598
5,732,355
5,864,6ꢀ9
6,044,28ꢀ
6,7ꢀ4,630
6,9ꢀ4,940
Other.patents.pending.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|