UNICOM Electric Switch GEP 32005T User Manual

MicroGST/5 and 8  
5 and 8 Port 10/100/1000Base-T  
Gigabit Ethernet Switches  
GEP-32005T  
GEP-32008T  
5 Port Switch  
8 Port Switch  
908 Canada Court  
City of Industry, CA 91748 U.S.A.  
Phone: 626.964.7873 or 800.346.6668 Fax: 626.964.7880  
USER’S MANUAL  
©UNICOM 2005. UNICOM and “A Network Systems Solution” are trademarks of UNICOM Electric, Inc.  
All rights reserved. Specifications subject to change without notice.  
Rev: 01.05  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Content  
1. Introduction..............................................................1  
2.Hardware Description...............................................3  
3. Installation................................................................6  
4. Network Application................................................7  
5. Technical Specification...........................................8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Introduction  
Gigabit Ethernet over copper technology is a proven cost-effective way for  
network equipment to be upgraded from Fast Ethernet to Gigabit speeds.  
The need of expensive fiber optic cabling for Gigabit speeds is eliminated by  
using standard 4-pair Category 5e copper cabling. This technology creates  
high-speed backbone connections between switches, servers, databases,  
and workstations.  
Unicom's 5 and 8 Port Desktop Gigabit Ethernet Switches are an ideal  
solution for solving traffic congestion at the core of the network. They offer  
Auto-Negotiation 10/100/1000Base-T Gigabit Ethernet ports that can  
significantly improve your network backbone performance. They will also fit  
into any enterprise level network to act as an exit to the backbone switch.  
The 5 and 8 Port Gigabit Ethernet Switches feature an Auto MDI/MDIX  
function for each port as well as store-and-forward switching and can auto-  
learn and store source addresses on a 4K MAC address table.  
Features  
Conforms to IEEE 802.3, 802.3u, 802.3ab and 802.3x  
Automatic MDI/MDIX crossover for all ports  
4K entry MAC address table  
1Mbit Memory buffer  
Back-plane:  
5 port: 10Gbps back-plane  
8 port: 16Gbps back-plane  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
N-Way Auto-Negotiation  
Back pressure half duplex  
Flow control full duplex  
True non-blocking switching  
Store-and-Forward architecture support  
Package Contents  
5 or 8 Port Desktop Gigabit Ethernet Switch  
Power Adapter  
Four Rubber Feet  
User Manual  
5 or 8 Port Desktop Gigabit Ethernet Switch  
DC Power Adapter  
Rubber Feet  
User Guide  
Figure 1-1. Package Contents  
Compare the contents of your 5 or 8 Port Gigabit Desktop Ethernet Switch  
package with the standard checklist above. If any item is missing or  
damaged, please contact your local dealer for service.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.Hardware Description  
This Section describes the hardware of the MicroGST/5 and 8 switches.  
The physical dimensions of each switch are 165 x 100 x 32.5 mm  
(L x W x H)  
Front and Rear Panel  
The Front Panel of the MicroGST/5 and 8 switches consists of a power LED  
indicator for the unit and LED indicators (100/1000, Link/Activity, Full  
duplex/Collision) for each Gigabit port.  
Figure 2-1. The Front Panel of the MicroGST/5 and 8 switches  
The Rear Panel of the MicroGST switches consists of Auto-Negotiation  
10/100/1000Mbps Ethernet RJ-45 connectors.  
RJ-45 Ports (Auto MDI/MDIX): Five or eight Auto-Negotiation  
10/100/1000 Mbps Ethernet RJ-45 connectors  
[Auto MDI/MDIX means that you can connect to another switch or  
workstation with either straight-through or crossover cabling.]  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Figure 2-2. The Rear Panel of the MicroGST/5 and 8 switches  
LED Indicators  
The LED Indicators gives real-time monitoring of system operating status.  
There are three LED indicators (100/1000, LNK/ACT, FDX/COL) for each  
Gigabit port and one Power LED for the unit. The following table provides  
descriptions of each LED status.  
Figure 2-3. LED Indicators  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
LED  
Status  
Green  
Off  
Description  
Power On  
Power  
Power is not connected  
Green  
Orange  
Port is operating at 1000Mbps speed.  
Port is operating at 100Mbps speed.  
No device attached or in 10Mbps mode  
Port is connecting with the device.  
Port is receiving or transmitting data.  
No device attached.  
100/1000  
LNK/ACT  
FDX/COL  
Off  
Green  
Blinking  
Off  
Orange  
Blinking  
Off  
Port is operating in Full-duplex mode.  
Packet collision occurring on this port.  
No device attached or in half-duplex mode.  
Table 2-1. The Descriptions of LED Indicators  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Installation  
Set the Switch on a sufficiently large flat space with a power outlet nearby.  
The surface should be clean, smooth, level, and sturdy. Ensure there is  
enough clearance around the Switch to allow air circulation and the  
attachment of the power cord and cables.  
Attaching Rubber Feet  
A. Make sure mounting surface on the bottom of the Switch is grease and  
dust free.  
B. Remove adhesive backing from your Rubber Feet.  
C. Apply the Rubber Feet to each corner on the bottom of the Switch. These  
footpads protect the Switch from shock and vibration.  
Power On  
Connect the power adapter cable to the power socket on the rear panel of  
the Switch. The other end of the power cord connects to the power outlet.  
Check the power indicator on the front panel to make sure if power is  
properly supplied.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Network Application  
This section provides a sample of network topology in which the MicroGST/5  
and 8 switches are used. In general, the MicroGST switches are designed  
as high-bandwidth backbone switches.  
You can use the MicroGST switches to connect servers, switches,  
workstations, and PCs to each other by connecting these devices directly to  
the Switch. The Switch automatically learns node addresses, which are  
subsequently used to filter and forward all traffic based on the destination  
address.  
For enterprise networks where large data broadcasts are constantly  
processed, this switch is an ideal link between departmental switches and  
the core switch. All workstations can connect to departmental switches and  
those switches are then connected to the MicroGST/5 and 8 switches. Now  
all the devices in this network can communicate with each other. Connecting  
servers to the core switch is important because it allows each workstation to  
access the server’s data.  
This switch is designed for backbone connectivity. In the above example,  
servers, department switches, and workstation are directly connected to the  
MicroGST switches.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Technical Specification  
The following table provides the technical specifications of the MicroGST/5  
and 8 switches.  
IEEE 802.3 10Base-T Ethernet,  
IEEE 802.3u 100Base-TX Fast Ethernet  
Standard  
IEEE 802.3ab Gigabit Ethernet  
IEEE802.3x Flow Control and Back-pressure  
Protocol  
CSMA/CD  
Technology  
Store-and-Forward switching architecture  
14,880 pps for 10Mbps  
Transfer Rate  
Connector  
148,800 pps for 100Mbps  
1,488,000 pps for 1000Mbps  
5 or 8 Gigabit Copper: RJ-45,  
Auto-MDIX on all ports  
MAC Address  
Memory Buffer  
4K Mac address table  
1Mbits  
10Base-T: 2-pair UTP/STP Cat. 3/4/5 cable  
EIA/TIA-568 100-ohm (100m)  
100Base-TX: 2-pair UTP/STP CAT. 5/5e cable  
EIA/TIA-568 100-ohm (100m)  
Network Cable  
Backplane  
Gigabit Copper: 4 pair UTP/STP CAT. 5e/6 cable  
EIA/TIA 568 100-ohm (100M)  
5 port: 10Gbps  
8 port: 16Gbps  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Per port:  
100/1000, Link/Activity, Full duplex/ Collision  
LED  
Per unit: Power  
Power Supply  
External power DC 12V/1.3A  
Power  
5 port: 7.5 Watt (maximum)  
Consumption  
8 port: 13.2Watt(maximum)  
Operation  
Temperature  
Operation  
Humidity  
0˚ to 45˚ C (32˚ to 113˚F)  
10% to 90% (Non-condensing)  
165 x 100 x 32.5 mm (L x W x H)  
6.5" x 3.94" x 1.3"  
Dimension  
EMI & Safety  
FCC Class A, CE, UL  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  

Tiger Products Co Ltd Games 07 022 User Manual
Toshiba Projection Television TLP510E User Manual
Toshiba Tablet Accessory P50 B User Manual
Trane Air Conditioner LO User Manual
TRENDnet Network Router TDM E400 User Manual
Univex Security Camera IK TF1 User Manual
Venturer Flat Panel Television PLV76198E User Manual
Vivotek Security Camera IP7330 User Manual
VTech Cordless Telephone CS6114 User Manual
VTech Cordless Telephone DS6301 User Manual