Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: [email protected]
Model #: APSX6048VRNET
PowerVerter® APS X Series 6000W Inverter/Charger with Auto-Transfer Switching and Line Interactive Voltage
Regulation
Highlights
48V DC or 208/230V (selectable) AC input; 208/230V, 50/60 Hz, pure sine
wave output (hardwired)
6000 watts continuous, 9000 watts OverPower and 12000 watts DoubleBoost
inverter output
3-stage, 23/90 amp selectable wet/dry cell battery charger; Auto Transfer
Switching; Automatic Voltage Regulation
DB9 communication port for SNMPWEBSOLOHV management.
Excellent for alternative power and standby power needs.
Description
Tripp Lite's APSX6048VR DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS,
a standalone power source or an inverter. Supplies up to 6000 watts of continuous 208 or 230V sine wave AC power from any 48V battery or
automotive DC source. When hardwire AC input is energized, commercial power passes through to connected equipment and the battery set is
recharged via 3 stage, 23/90 amp charging system. In UPS mode, the APS system responds to blackouts and severe voltage fluctuations with a
near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user
supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging and
UPS line power operation, and sine wave AC output in inverter and UPS backup modes. Built-in Automatic Voltage Regulation (AVR) corrects line
power AC brownouts and overvoltages without using battery power during battery charging and UPS standby modes. Reliable large transformer
design, with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on
startup. Optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous status
information (part# APSRM4 sold separately). Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly
adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to battery
power transfer voltages. DB9 communication port for SNMPWEBSOLOHV management.
Applications
Ideal for RVs, over-the-road trucking, conversion vans and fleet service vehicles; a standalone alternative power source for off-grid,
alternative energy or export applications, and as an uninterruptible power supply (UPS). NOTE: For sump pump applications, Tripp Lite
recommends its APS Truck Inverter/Chargers.
Package Includes
APSX6048VRNET Inverter/Charger
Instruction manual with warranty information
Features
Supports 208/230V AC output from a 208/230V AC line power source or 48V DC battery source
6000W continuous sinewave AC output in inverter mode
Double Boost output supports momentary start-up loads up to 200% of the continuous rating for up to 10 seconds (see specification chart) -
OverPower output supports longer duration overloads to 150% for up to 60 seconds
3-stage, selectable 23/90 amp battery charger with adjustable settings for wet/gel battery types
Set of 6 front panel LEDs display continuous status information
Set of 4 dip switches support AC input selection of 230V, selectable 50 /60Hz frequency, and selectable full or half cycle transfer times
Set of 4 dip switches support wet/gel battery charging profiles, adjustable 260/270V (230V) high voltage auto transfer during overvoltages
and selectable 150/60V / 170/180V (230V) AC low voltage auto transfer during brownouts
Set of 4 additional dip switches support battery equalization program and battery charger low / high settings
Download from Www.Somanuals.com. All Manuals Search And Download.
DC system voltage
(VDC)
48
Battery Pack
Accessory
(optional)
98-121 sealed lead acid battery (optional)
Battery recharge
rate
Selectable 23 / 90 amp
VOLTAGE REGULATION
Voltage regulation
description
Includes automatic voltage regulation to correct brownouts and over-voltages back to usable levels
Overvoltage
correction
Over-voltages are automatically reduced by 10%
Brownout
correction
Brownouts are automatically boosted by 10% and 20%
LEDS ALARMS & SWITCHES
Switches
3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off
control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode.
In AC uninterruptible power mode, auto/remote setting enables automatic transfer from line power to battery power - to
maintain continuous AC power to connected loads.
Front panel LEDs
PHYSICAL
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.
Shipping weight
(lbs)
125
Shipping weight
(kg)
56.25
Cooling method
Dual multi-speed fan
10 x 19.5 x 9
Unit Dimensions
(HWD/in)
Unit Dimensions
(HWD/cm)
25.5 x 49.5 x 22.71
Shipping
17.13 x 23.82 x 14.17
Dimensions
(HWD/in)
Shipping
43.51 x 60.5 x 36
Dimensions
(HWD/cm)
Unit weight (lbs)
Unit weight (kg)
106
47.7
Metal
Material of
construction
Style
Heavy-duty with built-in battery charger
ENVIRONMENTAL
Relative Humidity
0-95% non-condensing
LINE / BATTERY TRANSFER
Transfer time from
line power to
Dip-switch selectable 20 millisecond (full cycle) / 10 millisecond (half-cycle) transfer times which are compatible with
many computers, servers and networking equipment - verify transfer time compatibility of loads for UPS applications
battery mode
Download from Www.Somanuals.com. All Manuals Search And Download.
Low voltage
transfer to battery
power
In 230V AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 170V AC (user adjustable
to 180V). In 208V AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 165V (user
adjustable to 175V)-see manual
High voltage
transfer to battery
power
In 230V AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 260V (user adjustable
to 270 - see manual), In 208V AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to
235V (user adjustable to 245V-see manual)
SPECIAL FEATURES
Appearance
Black color
Load Sensing
Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off
and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of any
level, up to 150 watts.
Remote control
capability
Yes
TVSS grounding
CERTIFICATIONS
Certifications
Main grounding lug connects inverter/charger to earth or vehicle chassis ground
RoHS compliant
WARRANTY
Product Warranty
Period (Worldwide)
2-year limited warranty
Related Items
Optional Products
Related Model
Description
Qty.
For the APSX6048VRNET
1
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
Copyright © 2013 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.
Download from Www.Somanuals.com. All Manuals Search And Download.
|