®
Sand Pro 3040 & 5040
TM
The Quick Attach System (QAS) and up to 24 attachments make the Sand Pro 3040 and 5040 the most versatile
vehicles in the bunker.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
96
Download from Www.Somanuals.com. All Manuals Search And Download.
®
*
Sand Pro 3040 & 5040 Accessories
REAR QAS ATTACHMENTS
Designed to lightly scarify, pack, smooth and groom in one pass. Use in dry or wet conditions and can improve the condition of neglected sports fields. Model 08751.
Additional weight for the Tooth Rake attachment to improve performance in coarse or wet conditions. Set of 5 weights. PN 115-4333.
75” (190 cm) Brush – Attaches behind the Tooth Rake (08751) for a smoother finish. Model 08816.
TOOTH RAKE
WEIGHT KIT FOR TOOTH RAKE
TOOTH RAKE BROOM
This kit allows independent outside trowels to pivot and rake across the entire turn which eliminates unraked teardrop – Attaches to Tooth Rake (08751). PN 119-7158.
PIVOTING TROWELS KIT
Leaf rake assembly designed to be used alone or in combination with the tooth rake (08751) to achieve desired appearance. Great for wet conditions and collecting
debris in groomed areas (if used independently, requires QAS A-Frame Assembly, 108-9427). Model 08752.
SPRING RAKE
QAS-mounted carrier frame with hydraulic lifter allows operator to raise and lower drag mats without ever leaving the operator seat. 72” (183 cm) width. Model 08756.
Quickly produces a premium finish on dry, level surfaces (requires Drag Mat Carrier System - 08756). Model 08758.
DRAG MAT CARRIER SYSTEM
COCO DRAG MAT
Designed to for more rugged surfaces to quickly groom and finish. Use on wet or dry sand surfaces (requires Drag Mat Carrier System - 08756). Model 08757.
Pivots to follow the contours of uneven field surface. Use to scarify, loosen, or weed before smoothing. Easily adjust nail pattern and depth. Accepts up to a 40D common nail. Model 08761.
Designed to minimize top surface disruption, to maximize firmness, and provide a smooth finished look in contoured bunkers. Model 08753.
STEEL DRAG MAT
NAIL DRAG
SEGMENTED GROOMING BROOM
REPLACEMENT SEGMENTED
GROOMING BROOM
Replacement grooming broom with stiffer bristles. PN 110-8182.
WEIGHT KIT FOR SEGMENTED
GROOMING BROOM
Additional weight for Segmented Grooming Broom to improve performance in coarse or wet conditions. Set of 4 weights. PN 112-0025.
Designed to groom and level synthetic turf fields. Designed to brush in topdressing and stand-up turf on greens and tees – (requires Synthetic Turf Brush Kit,
PN 119-7107 or Greens Brush Kit, PN 119-7108). Model 08794.
GROOMING BRUSH
For use with Turf Groomer, 08794. PN 119-7107.
SYNTHETIC TURF BRUSH
GREENS BRUSH
For use with Turf Groomer, 08794. PN 119-7108.
Use to help stand-up and decompact synthetic turf. For use with Turf Groomer, 08794. PN 119-7109.
Use to collect ferrous debris on synthetic field. For use with Turf Groomer, 08794. PN 119-2827.
Stainless spring steel brushes loosen infill from compacted synthetic turf fields. Use to scarify, loosen, or weed infields. Use to groom beaches and rocky trails. Model 08790.
SPRING TINE KIT
MAGNET ATTACHMENT
SYNTHETIC TURF CONDITIONER
Use to level and/or scarify large areas. Includes box plow and scarifier with spring load regulation to allow relief if obstruction is hit. Model 08754.
QAS FINISH GRADER
The Rahn GL650 Infield Groomer levels uneven playing fields, helping to prevent ridge build up while creating a safer, more consistent infield. The triple row broom
is perfect for finishing the playing surface and can be stored upright for easy transport. The 2-way leveling system provides both a lock and float position to match
infield conditions
RAHN GROOMER
Use for spiking greens and other formal turf to increase air flow for healthier turf. Model 08755.
QAS SPIKER
QAS DEBRIS BLOWER
High powered blower designed to quickly clear debris from groomed and unwanted areas. Hydraulically-powered, 2000 rpm fan speed – 2700 cfm @ 81 mph (2700
cfm @ 130 kph). Requires Rear Remote Hydraulics - 08781. Model 08759.
Basic Drag Mat System, Model 112-1424 (requires 108-9427 & 110-1375)
BASIC DRAG MAT SYSTEM
ACCESSORIES
Can attach Spring Rake 08752 to be used independently. PN 108-9427.
QAS A-FRAME ASSEMBLY
400-HOUR FILTER
MAINTENANCE KIT
Includes 9 engine oil filters, 2 hydraulic oil filters and 2 air filters. Model 30035.
Quick-connect design allows rear-powered attachments to be connected in under a minute. Model 08781.
Quick-connect design allows front-powered attachments to be connected in under a minute. Model 08782.
Slows hydraulic lift and lower for increased precision and accuracy when using hydraulically-powered attachments. PN 112-1433.
Front and rear flood lights improve operator visibility during low natural light operation. PN 110-1314.
REAR REMOTE HYDRAULICS
FRONT REMOTE HYDRAULICS
VARIABLE ORIFICE KIT
LIGHT KIT
Adjustable speed check trains operators to groom at the desired speed while allowing the traction unit to operate in transport speed between tasks without any
adjustments or levers. PN 110-1371.
SPEED CONTROL KIT
Converts the traction unit to a utility vehicle to transport materials or trailers. Attaches to QAS A-Frame or 108-9427 for quick removal. PN 110-1375.
50 lb (22.7kg) – allows the Spiker or Rahn® Groomer attachments without the Front Lift Frame Assembly attached to meet ANSI compliance. PN 100-6442.
HITCH/TOW BAR
FRONT WEIGHT KIT
OPTIONAL TIRES
Includes individual tire, wheel and stem valve assembly. Typically used on greens. PN 112-0034.
Turf tread tire. PN 94-6126.
SMOOTH TIRE
TURF TIRE
*Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
The Sand Pro 3040 & 5004 are manufactured
in Tomah, WI ISO 9002 Certified Plant.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
98
Download from Www.Somanuals.com. All Manuals Search And Download.
|