CURRENT TIME MODE
animated
bar graph
Press [ ST/STP ] button to toggle between
Seconds Display and Date Display
Time Display
• 1st row displays: day of week
• 2nd row displays: hour - minute
• 3rd row displays: second
• Animated (1 second) - displays in the
perimeter bar graph
Date Display
• Day of week, hour, minute - display in the 1st and
2nd rows
• Numerical day, month - display in the 3rd row
• Animated (1 second) - displays in the perimeter bar
graph
NOTE: Press and Hold [ ST/STP ] to toggle the date
format between month - day and day - month
day of week
Congratulations on the purchase of
the Tech o NORTHSTAR CW1 or
current hour,
minute
4
CW2 compass watch.
Please read these instructions and
save for future reference.
For best performance, we
recommend that you:
• Avoid exposing the watch to
extreme conditions for extended
periods
• Avoid rough use or severe
impacts
• Do not open the watch case
unless certified to repair
electronic instruments
NORTHSTAR CW1 & CW2
current
second
Navigation
time display
date display
Arrow
ST/STP
[ST/STP]
LIGHT
day,
month
MODE
LAP/RESET
To Set the Currant Time Mode
• Clean with a soft damp cloth
• Keep watch away from
magnetic fields such as mobile phones, speakers and motors
• Store in a dry place
Display
• In the currant time mode, Press and Hold [MODE]
for 2 seconds until the "seconds" digits flash
• Press [ST/STP] or [LAP/RESET] to reset the
seconds to zero; OR Press [MODE] to navigate to
Current Time Mode
any setting you wish to change.
See navigation chart at right
• When the setting you wish to
change flashes, Press [ST/STP]
NORTHSTAR FEATURES
[ST/STP]
hold
[MODE]
[MODE]
Current Time Mode
Time System:
• Hour - minute - second. AM [A] PM [P]
• 12 hour or 24 hour format
• Animated 1 second bar graph
Calendar System :
• Month - date - day of week. Auto correction for leap year and day of week
Compass Mode
• 16 compass directions- 4 cardinal and 12 ordinal points
Increase
[MODE]
[MODE]
to raise the value or
hold [ST/STP]
minute
second
[LAP/RESET] to lower the value.
Note: If you Press and Hold the
button, the rate of change is faster
• When 12 or 24 flashes, Press
[ST/STP] or [LAP/RESET] to
toggle between the 12 /24 hour
format. Press [MODE] to confirm
NOTE: If NO INPUT for 1 minute
during setup, the display will
default to the Current Time Mode
Increase
faster
year
hour
[LAP/RESET]
Decrease
[MODE]
[MODE]
• Magnetic North pointer
• Backward bearing
• Compass lock
• Declination setting and calibration
date
month
hold [LAP/RESET]
Daily Alarm Mode
Decrease
faster
• Daily alarm
• Hourly beep
12/24
Chronograph Mode
DAILY ALARM MODE
• Measurement unit - 1/100 second
• Measuring capacity - 99 hours. 59 minutes & 59.99 seconds
Timer Mode
When the daily alarm is ON, the watch will beep for 20 seconds at the assigned time.
When the hourly beep is ON, the watch will beep twice every hour on the hour
Daily Alarm Display
Daily alarm setting ( hour - minute ) -
displays in the 2nd row
• Measurement unit - 1 second
• Measuring capacity - 99 hours, 59 minutes & 59 seconds
Pace Mode
• Pace beat - 40 to 180 beats per minute
Dual time Mode
Time System
Daily Alarm Mode
Alarm Time
( hour, minute)
To Set the Daily Alarm Mode
• In the Daily Alarm Mode, Press and
Hold [ MODE ] for 2 seconds until
the "seconds" digits flash
• Hour - minute - second. AM [A] PM [P]
• Animated 1 second bar graph
Alarm Beep
Hourly Beep
• Press [ST/STP] or [LAP/RESET] to
reset the seconds to zero; OR Press
[MODE] to navigate to any setting
you wish to change. See navigation
chart at right
FUNCTIONS MAP
Daily Alarm Mode
[MODE]
[ST/STP]
Increase
• When the setting you wish to
change flashes, Press [ST/STP] to
raise the value or [LAP/RESET] to
lower the value.
hold
hold
[ST/STP]
Pace
[MODE]
Dual Time
[MODE]
[MODE]
Increase
faster
Current Time (date)
[ST/STP]
Note: If you Press and Hold the button,
the rate of change is faster
[MODE]
minute
[LAP/RESET]
Decrease
To turn Daily Alarm ON/OFF
• Press [ ST/STP ] while in the Daily
Alarm Mode
[LAP/RESET]
[MODE]
[MODE]
Countdown Timer
[MODE]
hold [LAP/RESET]
hour
• When the icon
Daily Alarm is ON
appears, the
Decrease
faster
Current Time
[seconds]
To turn Hourly Beep ON/OFF
• Press [ LAP/RESET ] while in the Daily Alarm Mode
• When the icon appears, the hourly beep is ON
Compass
[MODE]
Chronograph
Daily Alarm
Download from Www.Somanuals.com. All Manuals Search And Download.
CHRONOGRAPH MODE:
This watch is a stopwatch
• Measurement unit: 1/100th second
• Measuring capacity: 99 hours 59 minutes & 59.99 seconds
• The watch will measure elapsed time, lap time and display elapsed time without
stopping measurement
NOTE: If NO INPUT for 1 minute during the setup, the display will default to the
Countdown Timer Mode
To Use the Timer
• Once a target time has been set (expl. 15 min. ) Press [ ST/STP ] to start
(digits will descend to zero). Press [ ST/STP ] again to terminate the countdown
(digits will stop)
run time
(minute)
run time
(hour)
Chronograph Display
• Running time (hour, minute) - displays
in the 2nd row
• Elapsed time will display through out the countdown
• Running time (second, 1/100th second)
- displays in the 3rd row
• Animated (1/100th of a second) -
displays in the perimeter bar graph
To Reload the Timer
run time
(second)
1/100 sec
• Press (when the timer has stopped) [ LAP/RESET ] to reload the target time
Alarm Sound
• The watch will beep once when it reaches 5, 4, 3, 2 and 1 seconds
• The watch will sound a long beep at zero.
NOTE: Press [ MODE ] to exit the Countdown Timer
To Measure Elapsed Time
• In Zero Display, Press [ ST/STP ] once to
start measurement - ( the digits will
advance). Press [ ST/STP ] once again to stop
- (digits will not advance) The elapsed time
between the 1st Press [ ST/STP ] and the
2nd Press [ ST/STP ] will display
lap time
PACE MODE
Lap Display
[LAP/
RESET]
Pace mode allows users to track their paces
while performing advanced orienteering
beats per
minute
techniques in the wilderness. Users will match
their hiking pace with the pacer function’s
audible beeps to maintain and track their speed
and distances over unfamiliar terrain.
To Display Lap Time
[ST/STP]
• With the chronograph active, Press [
LAP/RESET ] and the cumulative lap
times will display
elapsed
Pace Display
time (run)
Run Display
• Press [ LAP/RESET ] again to return to
counting display.
Zero Display
• The rate can be set in a range from 40 beats
per minute to 180 beats per minute in 5 beat
increments
[ST/STP]
NOTE: When the lap time is displayed the
elapsed time is still being measured in the
background
[LAP/RESET]
Pace Display
• The rate (beats per minute) -
To Reset the Chronograph
hold
[MODE]
elapsed time
(stopped)
displays in the 2nd row
[MODE]
180
[ST/STP]
• If you wish to record a new set of elapsed
times, Press (when the chronograph has
stopped) [ LAP/RESET ] to reset the
chronograph
Stopped Display
Increase
To Use the Pace Feature
• Once a pace rate has
hold [ST/STP]
been set (expl. 60 BPM),
Press [ ST/STP ] to start
the sound. Press [ ST/STP ]
40
Increase
faster
x 5 BPM
COUNTDOWN TIMER MODE
again to stop
[LAP/RESET]
This watch is a countdown timer
• Measurement unit: 1 second
• Measuring capacity: 99 hours 59 minutes & 59 seconds
• The watch will descend from the target time to zero
To set the Pace
Decrease
• In the Pace Mode, Press
and Hold [ MODE ] for 2
seconds until the "beat
rate" digits flash
• Press [ ST/STP ] to raise
180
40
hold[LAP/RESET]
animated
bar graph
Decrease
x 5 BPM
Countdown Timer Display
• The running time (hour, minute) -
displays in the 2nd row
• The running time (seconds) -
(second)
displays in the 3rd row
• Animated (1 second) - displays in
the perimeter bar graph
faster
running time
running time
(minute)
(hour)
the value or [ LAP/RESET ]
to lower the value. Note: If
you Press and Hold the button, the rate of
change is faster
• When the rate is set, Press [ MODE ] to confirm
running time
Countdown Timer
NOTE: If NO INPUT for 1 minute during setup, display
will default to Pace Mode
To Set the Countdown Timer Target Time
• In the Countdown Timer Mode,
Press and Hold [ MODE ] for 2
seconds until the "seconds"
digits flash
DUAL TIME MODE
[ST/STP]
Increase
Countdown Timer Mode
hold
[MODE]
• Press [ MODE ] to navigate to the
setting that you wish to change.
See navigation chart at right
• When the setting you wish to
change flashes, Press [ ST/STP ]
to raise the value or [ LAP/RESET ]
to lower the value. Note: If you
Press and Hold the button, the
rate of change is faster
This watch is a dual time piece.
Dual time is synchronized with
current time
animated
bar graph
hold [ST/STP]
second
dual time
Increase
faster
Dual Time Display
dual time
(minute)
(hour)
[MODE]
minute
• Dual time (hour, minute) -
dual time
(second)
displays in the 2nd row
• Dual time (seconds) -
displays in the 3rd row
• Animated (1 second) -
displays in the perimeter
bar graph
[LAP/RESET]
Decrease
Dual Time Mode
[MODE]
• When the hour is set, Press
[ MODE ] to confirm
hour
hold[LAP/RESET]
[MODE]
Decrease
faster
Download from Www.Somanuals.com. All Manuals Search And Download.
DUAL TIME MODE
on the continent. Where True and Magnetic North are in the same direction, the
declination is zero. At any point west of that line, your compass needle will
point east of True North. This is called “Easterly Declination.” At any point east
of that zero line, your compass needle will point west of True North. This is
called “Westerly Declination.”
To Set the Dual Time Mode
• In Dual Time Mode, Press and
Hold [ MODE ] for 2 seconds
until the "minutes" digits flash
• Press [ MODE ] to navigate to
the setting that you wish to
change. See navigation chart at
right
NOTE: The watch displays Westerly Declination as a negative number.
example: -45
[ST/STP]
Increase
Dual Time Mode
hold
[MODE]
MAGNETIC DECLINATION COMPENSATION
• When the setting you wish to
change flashes, Press [ ST/STP ]
to raise the value or [LAP/RESET]
to lower the value.
Note: If you Press and Hold the
button, the rate of change is
faster
• When the hour is set, Press
[ MODE ] to confirm and return to
the Dual Time Mode
hold [ST/STP]
The watch will automatically make declination compensation. We have
included a list of the declination angles of North America. In the
Declination Setting Mode, input the closest angle and the watch will
make the adjustment.
Increase
faster
[MODE]
minute
[LAP/RESET]
Decrease
[MODE]
hour
hold[LAP/RESET]
[MODE]
Decrease
faster
NOTE: If NO INPUT for 1 minute
during the setup, the display will
default to the Dual Time Mode
COMPASS MODE
This watch is a digital compass that provides directions, bearings and
Magnetic North Pole location.
Caution: Accurate readings will be compromised when used near
magnetic fields, mobile phones, speakers, motors, electrical
appliances and inside a moving vehicle or a ferroconcrete building.
Watch may need to be calibrated for
declination
Perform calibration when:
• first time of use
• DIST is flashing
• Declination has changed
• Battery has been changed
direction of travel heading indicator
dist indicator
compass
direction
compass
bearing
Compass Display
To access, press [ LAP/RESET ] when in
current time mode.
• Compass direction - displays in 1st
row
• Compass bearing - displays in 2nd row
• Animated cardinal points - display in
perimeter bar graph
Compass Mode
COMPASS CALIBRATION
Compass
Mode
any button
except [LIGHT]
1 minute
To Calibrate the Compass
• In the Compass Mode, Press
and Hold [ MODE ] for 2
seconds. DEC will display in
the 1st row and the digits will
flash
• Press [ ST/STP ] to set
desired declination angle (-90
to +90)
• Press [ MODE ] CAL will
display in the 1st row and the
north pole pointer will move
• Lay the watch on a level
surface. Steadily rotate the
watch counter-clockwise
twice. Keep the pointer in the
same direction through out
the rotation
hold
Compass Standby Mode
• To extend battery life, watch will
switch to standby mode if there is NO
INPUT for 1 minute when in compass
mode
• Press any button except [ LIGHT ] to
exit standby mode
[MODE]
Declination
Mode
Compass Stand-by Mode
[LAP/RESET]
[MODE]
MAGNETIC DECLINATION
[MODE]
Calibration
Mode
The Magnetic sensor in the compass is
attracted by the magnetism of the
Earth and therefore, always points to
the constantly shifting Magnetic
North. There is another “North Pole.”
True North is static and located
geographically about 800 miles
north of the magnetic pole. Maps
and directions usually are based on
True North. Magnetic declination is
the angle between True North and
Magnetic North. The amount of
declination at any given point
depends on the location of that
point.
true north
magnetic north
1 minute
magnetic
magnetic
declination
declination
Finish
Start
• Press [MODE] to confirm and
return to Compass Mode
Rotation
Download from Www.Somanuals.com. All Manuals Search And Download.
FIND YOUR WAY
TAKE A BEARING
338˚
Use this watch and a protractor to
keep to a trail
To Determine the Direction of Travel
• Turn the watch until the
navigation arrow points to the
direction of travel. Press [
COMP/RESET ] to enter Compass
Mode
• The compass direction displays
in the 1st row
• The bearing displays in the 2nd
row
• The bar graph will indicate
Magnetic North
Important: When taking a bearing, the
watch MUST be parallel to the
horizon or the data will be
inaccurate.
0˚
0˚
target
Before Hiking
finish
north/northwest
north
• Locate the distance between
and location of the turning points
of the trail on a map
0˚
1.7 mi
direction
of travel
• Use a protractor to determine
the bearing of each turn and
mark the map. See right
0˚
225˚
D
C
0˚
.5 mi
315˚
navigation
Arrow
Start to B
B to C
C to D
= 315˚ / 1.2 mi
= 0˚ / .6mi
= 225˚ / .5 mi
.6 mi
magnetic north
indicator
compass
direction
0˚
315˚
B
D to finish = 315˚ / 1.7 mi
bearing
1.2 mi
While Hiking
• Use the watch to find the
bearing at each turn
start
TAKE A REVERSE BEARING
This watch will also display the opposite
direction (180˚) of a bearing. A reverse
bearing is used to accurately
backtrack your direction or determine
you location on a map
LIMITED WARRANTY:
bearing
What is covered? Johnson Outdoors Inc. warrants your Tech4o
Watch to be free from defects in materials or workmanship, and to
perform accurately, for one (1) year provided it has not been
damaged by the causes described in the next paragraph.
What is not covered? Normal wear, and damage due to the abrasion,
melting, misuse, alteration, and abuse (including any disassembly)
are not covered by this warranty.
Digital Watches are water resistant, they are not waterproof.
Damage resulting from excessive exposure to water, heat or cold is
not covered under this warranty. Additionally, the battery is not
covered under the warranty.
How to obtain warranty service or repair of your watch: Should a
defect covered by this warranty appear in your watch, call our
Consumer Service Department toll-free at 1.800.572.8822 for
return authorization and instructions. (You must pay the cost of
returning the unit to us). If the product is found to be defective in
material or workmanship, we shall, at our option, either repair or
replace it without charge, and will pay the cost of return shipment
to you. If repairs are required to correct any problem not covered
by this warranty, we will contact you for approval to proceed and to
charge you for the components repaired or replaced, plus a
nominal charge for labor.
Bearing Display
[MODE]
To determine a Backward Bearing
• In Compass Mode, Press
compass direction
has no affect
magnetic north
indicator has no
affect
[MODE] to toggle between forward
and reverse bearings. The icon "
displays for Reverse Bearing
"
reverse
bearing
• The watch will automatically return
to forward bearing after being
changed to Standby Mode or Current
Time Mode
reverse bearing
indicator
Reverse Bearing Display
LOCK A BEARING
This watch will provide a "compass
lock" function to secure an
improtant bearing. When the
"
" is displayed, the
Bearing Display
[ST/STP]
compass reading will not change
THERE ARE NO EXPRESS WARRANTIES ON YOUR WATCH THAT ARE
NOT CONTAINED IN THIS DOCUMENT. IN NO EVENT SHALL WE BE
LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
FROM USING OR LOSS OF USE OF YOUR WATCH.
To Lock / Unlock the Compass
• When in Compass Mode,
Press [ST/STP] to toggle between
lock and unlock
• The watch will automatically
return to unlock after being
changed to Standby Mode or
Current Time Mode
bearing lock
Some states do not allow exclusion or limitation of incidental or
consequential damages, so the above exclusion may not apply to
you.
This warranty gives you specific legal rights, and you may have
other rights which vary from state to state.
indicator
Locked Bearing Display
FIND YOUR LOCATION
U.S.A.:
Canada.:
Johnson Outdoors Canada Inc.
4180 Harvester Road
Johnson Outdoors Inc.
625 Conklin Road
PO Box 966
Use this watch with the reverse
bearing feature, a map and
protractor, to determine your
current position
0˚
Burlington, Ontario, Canada L7L 6B6
Phone: 905.634.0023
Toll Free: 1.800.263.6390
Binghamton, NY 13902
Phone: 607.779.2222
Toll Free: 1.800.572.8822
landmark A
270˚
Fax:
1.800.661.1170
To Find Your Current Position
• Locate two distant, identifiable
landmarks. See diagram at right
• Find each landmark's location
on the map
• Use the watch to determine
the reverse bearing of each
landmark
Fax:
607.779.2293
landmark B
current
position
135˚
• With a protractor, draw a line
down each reverse bearing onto
the map
• Your current position is the
intersection of these two lines
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Tech O is a trademark of Johnson Outdoors Inc.
Rev.A 5-07
|