Internal USB version
Installation Guide
1 Turn off the computer
2 Mount the RDX QUIKSTOR in the
PC. The Eject/Power LED should
be on the lower right. Secure the
unit by using the four mounting
screws provided.
Power
USB
3 Connect the USB and power cables
to the RDX QuikStor
4 Connect the USB cable to the host
PC mother board or USB HBA.
Pin 1 location is marked on the
cable connector with a triangle ( ).
Consult your motherboard/
HBA manual for the Pin 1 location
on the mating USB connector
5 Turn on the computer
Warning:
• Connecting the USB Cable incorrectly
to the PC will result in damage.
• Verify PIN layout on the motherboard
versus cable connector PIN OUT.
PIN SIGNAL PIN SIGNAL
+5VDC
1
9
2
1
3
5
7
9
VCC
2
4
6
8
VCC
DATA-
DATA+
GND
USB0-
USB0+
GND
Key
USB1-
USB1+
GND
Key
10 USBOC
10
Product Registration
Register this product at
©2007 RDX is a registered trademark of ProStor Systems, Inc.
Part No. 433822-01
Download from Www.Somanuals.com. All Manuals Search And Download.
|