Norton Ghost™ User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
SYMANTEC LICENSE AND WARRANTY
IMPORTANT: PLEASE READ THE TERMS AND CONDITIONS OF
D. use a later version of the Software than is provided herewith unless
You have purchased upgrade insurance or have otherwise separately
acquired the right to use such later version;
E. use, if You received the software distributed on media containing
multiple Symantec products, any Symantec software on the media for
which You have not received a permission in a License Module;
F. use the Software in any manner not authorized by this license; nor
G. use the Software in any manner that contradicts any additional
restrictions set forth in Section 9, below.
THIS LICENSE AGREEMENT CAREFULLY BEFORE USING THE
SOFTWARE. SYMANTEC CORPORATION AND/OR ITS
SUBSIDIARIES ("SYMANTEC") IS WILLING TO LICENSE THE
SOFTWARE TO YOU AS THE INDIVIDUAL, THE COMPANY, OR
THE LEGAL ENTITY THAT WILL BE UTILIZING THE SOFTWARE
(REFERENCED BELOW AS "YOU OR YOUR") ONLY ON THE
CONDITION THAT YOU ACCEPT ALL OF THE TERMS OF THIS
LICENSE AGREEMENT. THIS IS A LEGAL AND ENFORCEABLE
CONTRACT BETWEEN YOU AND SYMANTEC. BY OPENING
THIS PACKAGE, BREAKING THE SEAL, CLICKING ON THE
"AGREE" OR "YES" BUTTON OR OTHERWISE INDICATING
ASSENT ELECTRONICALLY, OR LOADING THE SOFTWARE,
YOU AGREE TO THE TERMS AND CONDITIONS OF THIS
AGREEMENT. IF YOU DO NOT AGREE TO THESE TERMS AND
CONDITIONS, CLICK ON THE "I DO NOT AGREE", "NO"
BUTTON, OR OTHERWISE INDICATE REFUSAL, MAKE NO
FURTHER USE OF THE SOFTWARE, AND RETURN THE FULL
PRODUCT WITH PROOF OF PURCHASE TO THE DEALER FROM
WHOM IT WAS ACQUIRED WITHIN SIXTY (60) DAYS OF
PURCHASE, AND YOUR MONEY WILL BE REFUNDED.
2. CONTENT UPDATES:
Certain Symantec software products utilize content that is updated
from time to time (antivirus products utilize updated virus definitions;
content filtering products utilize updated URL lists; firewall products
utilize updated firewall rules; vulnerability assessment products utilize
updated vulnerability data, etc.; collectively, these are referred to as
"Content Updates"). You may obtain Content Updates for any period
for which You have purchased a subscription for Content Updates for
the Software (including any subscription included with Your original
purchase of the Software), purchased upgrade insurance for the
Software, entered into a maintenance agreement that includes Content
Updates, or otherwise separately acquired the right to obtain Content
Updates. This license does not otherwise permit You to obtain and use
Content Updates.
1. LICENSE:
The software which accompanies this license (collectively the
"Software") is the property of Symantec or its licensors and is protected
by copyright law. While Symantec continues to own the Software, You
will have certain rights to use the Software after Your acceptance of this
license. This license governs any releases, revisions, or enhancements
to the Software that Symantec may furnish to You. Except as may be
modified by a Symantec license certificate, license coupon, or license
key (each a "License Module") which accompanies, precedes, or
follows this license, Your rights and obligations with respect to the use
of this Software are as follows:
3. SIXTY (60) DAY MONEY BACK GUARANTEE:
If You are the original licensee of this copy of the Software and are not
completely satisfied with it for any reason, please contact Symantec
Customer Service, for a refund of the money You paid for the Software
(less shipping, handling, and any applicable taxes) at any time during
the sixty (60) day period following the date of purchase.
.4. LIMITED WARRANTY:
YOU MAY:
Symantec warrants that the media on which the Software is distributed
will be free from defects for a period of sixty (60) days from the date of
delivery of the Software to You. Your sole remedy in the event of a
breach of this warranty will be that Symantec will, at its option, replace
any defective media returned to Symantec within the warranty period
or refund the money You paid for the Software. Symantec does not
warrant that the Software will meet Your requirements or that
operation of the Software will be uninterrupted or that the Software
will be error-free.
THE ABOVE WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED,
INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY
RIGHTS. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS. YOU MAY HAVE OTHER RIGHTS, WHICH VARY FROM
STATE TO STATE AND COUNTRY TO COUNTRY.
A. use one copy of the Software on a single computer. If a License
Module accompanies, precedes, or follows this license, You may make
that number of copies of the Software licensed to You by Symantec as
provided in Your License Module. Your License Module shall
constitute proof of Your right to make such copies.
B. make one copy of the Software for archival purposes, or copy the
Software onto the hard disk of Your computer and retain the original
for archival purposes;
C. use the Software on a network, provided that You have a licensed
copy of the Software for each computer that can access the Software
over that network;
D. after written notice to Symantec, transfer the Software on a
permanent basis to another person or entity, provided that You retain
no copies of the Software and the transferee agrees to the terms of this
license; and
E. use the Software in accordance with any additional permitted uses
set forth in Section 9, below.
5. DISCLAIMER OF DAMAGES:
SOME STATES AND COUNTRIES, INCLUDING MEMBER
COUNTRIES OF THE EUROPEAN ECONOMIC AREA, DO NOT
ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE BELOW
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW
AND REGARDLESS OF WHETHER ANY REMEDY SET FORTH
HEREIN FAILS OF ITS ESSENTIAL PURPOSE, IN NO EVENT WILL
SYMANTEC OR ITS LICENSORS BE LIABLE TO YOU FOR ANY
SPECIAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES,
INCLUDING ANY LOST PROFITS OR LOST DATA ARISING OUT
YOU MAY NOT:
A. copy the printed documentation which accompanies the Software;
B. sublicense, rent or lease any portion of the Software; reverse
engineer, decompile, disassemble, modify, translate, make any attempt
to discover the source code of the Software, or create derivative works
from the Software;
C. use a previous version or copy of the Software after You have
received a disk replacement set or an upgraded version. Upon
upgrading the Software, all copies of the prior version must be
destroyed;
Download from Www.Somanuals.com. All Manuals Search And Download.
OF THE USE OR INABILITY TO USE THE SOFTWARE EVEN IF
SYMANTEC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
IN NO CASE SHALL SYMANTEC'S OR ITS LICENSORS' LIABILITY
EXCEED THE PURCHASE PRICE FOR THE SOFTWARE. The
disclaimers and limitations set forth above will apply regardless of
whether You accept the Software.
media, or network drive. If a License Module accompanies, precedes,
or follows this license, you may make and use that number of copies of
the Software licensed to you by Symantec as provided in your License
Module on an equal number of individual computers pursuant to the
terms of this license. Your License Module shall constitute proof of
your right to make and use such copies;
(ii) use the Software on that same computer to create an image file of a
hard drive on that computer and store the image file on removable
media for disaster recovery purposes;
6. U.S. GOVERNMENT RESTRICTED RIGHTS:
(iii) use the Software to create a boot disk as described in the
documentation for reapplying the hard drive image that was created
for disaster recovery purposes to the hard drive on that same
computer; and
(iv) use the Software to clone a hard drive from that same computer to
a replacement computer, in the manner described in the software
documentation, and to use the Software on the replacement computer
provided that the Software has been removed from the original
computer.
You may not use the Software commercially or non-commercially for
the purpose of creating multiple computers or hard drives not
connected to the original computer, with similar or identical
configurations to that of the original computer or hard drive.
RESTRICTED RIGHTS LEGEND. All Symantec products and
documentation are commercial in nature. The software and software
documentation are "Commercial Items", as that term is defined in 48
C.F.R. section 2.101, consisting of "Commercial Computer Software"
and "Commercial Computer Software Documentation", as such terms
are defined in 48 C.F.R. section 252.227-7014(a)(5) and 48 C.F.R.
section 252.227-7014(a)(1), and used in 48 C.F.R. section 12.212 and
48 C.F.R. section 227.7202, as applicable. Consistent with 48 C.F.R.
section 12.212, 48 C.F.R. section 252.227-7015, 48 C.F.R. section
227.7202 through 227.7202-4, 48 C.F.R. section 52.227-14, and other
relevant sections of the Code of Federal Regulations, as applicable,
Symantec's computer software and computer software documentation
are licensed to United States Government end users with only those
rights as granted to all other end users, according to the terms and
conditions contained in this license agreement. Manufacturer is
Symantec Corporation, 20330 Stevens Creek Blvd., Cupertino, CA
95014.
7. EXPORT REGULATION:
Export, re-export of this Software is governed by the laws and
regulations of the United States and import laws and regulations of
certain other countries. Export or re-export of Software to any entity
on the Denied Parties List and other lists promulgated by various
agencies of the United States Federal Government is strictly prohibited.
8. GENERAL:
If You are located in North America or Latin America, this Agreement
will be governed by the laws of the State of California, United States of
America. Otherwise, this Agreement will be governed by the laws of
England. This Agreement and any related License Module is the entire
agreement between You and Symantec relating to the Software and: (i)
supersedes all prior or contemporaneous oral or written
communications, proposals and representations with respect to its
subject matter; and (ii) prevails over any conflicting or additional
terms of any quote, order, acknowledgment or similar
communications between the parties. This Agreement may only be
modified by a License Module or by a written document which has
been signed by both You and Symantec. This Agreement shall
terminate upon Your breach of any term contained herein and You
shall cease use of and destroy all copies of the Software. The
disclaimers of warranties and damages and limitations on liability shall
survive termination. Should You have any questions concerning this
Agreement, or if You desire to contact Symantec for any reason, please
write: (i) Symantec Customer Service, 555 International Way,
Springfield, OR 97477, USA, or (ii) Symantec Customer Service
Center, PO BOX 5689, Dublin 15, Ireland.
9. ADDITIONAL USES AND RESTRICTIONS:
Notwithstanding any of the terms and conditions contained in the
Symantec Corporation Software License Agreement, the following
additional terms apply to the product you have purchased. You may:
(i) use the Software on one computer to clone, or apply an image of, a
hard drive on that computer, or a portion thereof, to another hard
drive on the same computer, a replacement computer, secondary
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Chapter 1
Introducing Norton Ghost ............................................................................. 14
How Norton Ghost works .............................................................................. 15
Virtual Partition ...................................................................................... 15
Norton Ghost components ............................................................................ 17
Norton Ghost wizards ............................................................................. 17
Ghost Boot Wizard .................................................................................. 22
Ghost Explorer ......................................................................................... 22
GDisk ....................................................................................................... 23
Ghost Walker ........................................................................................... 24
Chapter 2
Minimum system requirements ..................................................................... 26
Ghost.exe ................................................................................................. 26
CD and DVD writing .............................................................................. 26
Installing Norton Ghost ................................................................................. 27
SystemWorks Pro ............................................................................. 28
Installing Norton Ghost .......................................................................... 29
If the opening screen does not appear .................................................... 29
Registering Norton Ghost ....................................................................... 29
Updating Norton Ghost ................................................................................. 31
Uninstalling Norton Ghost ............................................................................ 31
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Contents
Chapter 3
Starting Norton Ghost from the tray icon ..............................................35
Restoring your computer from an image file ................................................37
Cloning a hard disk or partition .....................................................................39
Launching Ghost.exe peer-to-peer .................................................................40
Identifying a hard disk ....................................................................................43
Chapter 4
Setting the DOS version ..........................................................................49
Installing SCSI drivers .............................................................................53
Installing extra drivers .............................................................................56
Running your computer from the Virtual Partition .....................................57
Restarting your computer from the Virtual Partition ...........................58
Checking the integrity of an image file ..........................................................58
Viewing the task log ........................................................................................59
Starting Ghost.exe ...........................................................................................59
What to do if a task fails ..................................................................................60
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
7
Chapter 5
About Norton Ghost image files .................................................................... 62
Image files and compression .......................................................................... 62
Image files and CRC32 ................................................................................... 63
Image files and volume spanning ................................................................... 63
Standard image files ................................................................................ 63
Size-limited image files ........................................................................... 64
Restoring from a spanned image ............................................................ 65
Image files and tape drives ............................................................................. 66
GoBack and Norton Ghost ............................................................................. 67
GoBack and Ghost.exe ............................................................................ 67
Dynamic disks in Windows 2000/XP ............................................................ 68
Hibernation and swap files ............................................................................. 69
Chapter 6
What is a Ghost boot disk .............................................................................. 72
When to create a Ghost boot disk .................................................................. 72
How to use a Ghost boot disk ........................................................................ 72
Opening the Ghost Boot Wizard ................................................................... 74
Creating boot disks and boot images ............................................................. 75
Selecting a template ........................................................................................ 84
Adding network drivers to the Ghost Boot Wizard ...................................... 86
Adding packet drivers to the Ghost Boot Wizard ................................. 86
Adding NDIS2 drivers to the Ghost Boot Wizard ................................. 87
Customizing the template ....................................................................... 88
Adding command-line parameters to a boot package .................................. 88
Providing MS-DOS ......................................................................................... 89
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Contents
Chapter 7
An overview of using Ghost.exe .....................................................................92
Marking your disks ..................................................................................94
Restoring from an image file .........................................................................101
Restoring a partition from an image file ...............................................103
Cloning disk to disk ...............................................................................105
Cloning partition to partition ...............................................................106
Verifying image integrity ..............................................................................107
Chapter 8
Chapter 9
Saving an image file directly to a CD-R/RW or DVD-R/RW drive ............113
Saving an image file to an unsupported CD-R/RW or
DVD-R/RW drive ..................................................................................114
Splitting an image file during a backup ................................................115
Understanding Ghost Explorer ....................................................................118
Launching a file .............................................................................................119
Listing the contents of an image file .............................................................121
Setting span file sizes .....................................................................................121
Splitting an image file ....................................................................................122
Compiling a file .............................................................................................122
Determining Norton Ghost image file version ............................................123
Using Ghost Explorer from the command line ...........................................123
Using Ghost Explorer with long file names ..........................................125
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
9
Chapter 10
Introducing GDisk ........................................................................................ 128
Running GDisk ............................................................................................. 128
Showing information about disks ................................................................ 133
Deleting and wiping your disk ..................................................................... 135
Activating or deactivating a partition .......................................................... 137
Hiding or unhiding a partition .................................................................... 137
Specifying the boot.ini path and file name .......................................... 138
Adding an entry to Boot.ini .................................................................. 138
Setting the default boot option and timeout ....................................... 141
Support for Large Hard Disks ...................................................................... 142
Chapter 11
clients ..................................................................................................... 144
Norton Ghost Walker limitations ........................................................ 144
Loss of access to external data objects ......................................................... 145
Identical user names and passwords across workstations .......................... 145
Using Ghost Walker ...................................................................................... 146
Running Ghost Walker from the command line ................................. 148
Appendix A
Command-line switches ............................................................................... 154
Clone switch usage ........................................................................................ 166
Defining the type of clone command ................................................... 166
Setting a source for the clone switch .................................................... 167
Setting a destination for the clone switch ............................................ 169
Setting a destination size for the clone switch ..................................... 169
Examples of clone switch usage ............................................................ 170
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Contents
-CRC32 switch usage .....................................................................................172
Examples of -CRC32 usage ...................................................................173
Files not checked with CRC ..................................................................174
Ghost.exe and the Virtual Partition .............................................................175
Appendix B
Peer-to-peer connections ..............................................................................178
Removable media ..........................................................................................179
CD/DVD usage ..............................................................................................179
Internal drives ................................................................................................180
Appendix C
Appendix D
Parallel Technologies cables ..........................................................................182
The Wattcp.cfg configuration file .................................................................184
Wattcp.cfg key words ....................................................................................184
Supported configurations .............................................................................188
Position of disk ..............................................................................................188
Boot configuration ........................................................................................188
Norton Ghost utility support ........................................................................189
Appendix F
Missing hibernation file .........................................................................194
Computer fails to restart .......................................................................194
Getting out of the Virtual Partition ......................................................195
Cancelling a Ghost.exe operation .........................................................195
Installing and uninstalling Norton Ghost ............................................195
Connecting using USB peer-to-peer .....................................................196
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Ghost.exe from the floppy disk drive .................................... 199
Outdated CD-R/RW drive BIOS .......................................................... 200
Using PC-DOS or MS-DOS .................................................................. 200
High compression ................................................................................. 200
Using third-party software to write to the CD-R/RW disc ................. 200
Appendix G
View Log ................................................................................................ 202
Abort error file (Ghosterr.txt) .............................................................. 202
Creating a full diagnostic statistics dump summary ........................... 202
Testing TCP/IP functionality ....................................................................... 203
Choosing an interface type for installation ................................................. 206
Choosing an installation mode .................................................................... 206
Installing from the command line ............................................................... 207
Glossary
Index
CD Replacement Form
Download from Www.Somanuals.com. All Manuals Search And Download.
12 Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
14 About Norton Ghost
Introducing Norton Ghost
Introducing Norton Ghost
Norton Ghost protects your data from computer disasters. The intuitive
Windows interface lets you create backup images of your hard disk or selected
partitions. You can clone directly between two computers using a network, USB,
or parallel connection. Norton Ghost is based on the robust cloning technology
of Symantec Ghost Enterprise.
Norton Ghost includes the following features:
■
Backup flexibility: Back up directly to a wide range of hard drives and
removable media, including CD-R/RW drives, FireWire and USB hard
drives, DVD devices, Iomega, ZIP, and JAZ drives.
■
■
■
Peer-to-peer communication: Fast peer-to-peer communication using high-
speed parallel, USB, or network IP connections.
Operating system support: You can back up, restore, or clone computers
installed with DOS, Windows 2000/XP/NT/9x, OS/2, or Linux.
File system support: You can back up, restore, or clone FAT, FAT32, NTFS,
and Linux Ext2/3 file systems.
■
■
Image file editing: Ghost Explorer lets you edit FAT and FAT32 image files.
Restore individual files: Ghost Explorer lets you restore individual files from
an image file.
■
■
Disk and partition management: You can run GDisk from DOS or in a
command shell from within Windows to manage partitions and disks.
Tutorials: A set of tutorials is included in Norton Ghost to provide a
demonstration of the most commonly used functions.
What’s new in Norton Ghost 2003
■
Windows user interface: You can launch Norton Ghost directly from
Windows without having to restart your computer.
■
■
■
Virtual Partition: Eliminates the need for a boot disk in most situations.
Linux support: You can back up, restore, and clone EXT3 file systems.
NTFS support: Norton Ghost now writes to NTFS partitions. You can store
an image file on an NTFS drive and restore from an image file located on an
NTFS drive.
Download from Www.Somanuals.com. All Manuals Search And Download.
About Norton Ghost 15
How Norton Ghost works
■
■
■
Mapped network drives: A computer on a network can be mapped to a drive
letter. This lets Norton Ghost see the computer as a local drive and back up to
and restore from it.
Ghost Walker: This utility lets you update Security Identifiers (SID) and
computer names. Ghost Walker was previously available only in Symantec
Ghost, the corporate version of Norton Ghost.
Support for FireWire, USB 1.1, USB 2.0: You can now use Norton Ghost to
back up, restore, and clone to and from FireWire, USB 1.1, and 2.0 devices,
including hard disks and supported CD-R/RW and DVD drives.
■
■
■
DVD support: You can use Norton Ghost to back up to and restore from
supported DVD+ R/RW and DVD-R/RW drives.
Expanded CD-R/RW support: The CD-R/RW drives supported by Norton
Ghost have been increased to include most new drives.
Large drive support: Norton Ghost supports backing up, restoring, and
cloning IDE drives larger than 128 GB.
How Norton Ghost works
The basis of Norton Ghost is a cloning function that creates an image file that
contains all of the information required to recreate a complete disk or partition.
Image files contain a backup copy of an entire drive or one or more partitions.
The image file can be restored to one or more partitions or disks, replacing
existing data.
Virtual Partition
The Virtual Partition is a partition that is created when you perform a backup,
restore, clone, or other operation from Windows. All the files required for the
backup, restore, or clone are automatically installed into the Virtual Partition and
the task performed. Most of the Virtual Partition operation is not apparent to
you. However, there may be some occasions when you must know what the
Virtual Partition is and what it does, such as if you want to run Ghost.exe or
another application from the Virtual Partition.
One primary partition slot must be available in the MBR for the Virtual Partition.
Download from Www.Somanuals.com. All Manuals Search And Download.
16 About Norton Ghost
How Norton Ghost works
Hardware restrictions
Norton Ghost is designed to restore to and clone identical hardware. When
Microsoft Windows is installed, drivers necessary to support your hardware are
installed to the hard disk and recorded in the Windows Registry. If you move an
installation of Windows to another computer, either by directly moving the hard
disk or copying it using a Ghost operation, there is no guarantee that it will boot
or function correctly. Although Microsoft provides tools, such as Sysprep, that
may alleviate these problems to volume license holders, these tools are usually
unavailable to consumer or small business users.
A computer with Windows installed should be copied to a computer with
identical hardware. Moving or cloning file systems that do not contain an
operating system does not usually present a problem.
Preparing for an emergency
After you have installed Norton Ghost and created a backup image, you must
create and test a recovery boot disk for use in an emergency. If you experience a
critical failure and cannot start your computer, then you must have a recovery
boot disk. This lets you start your computer in DOS and run Norton Ghost to
restore your computer.
Note: If you saved your image file directly to CD or DVD, then you do not need a
recovery boot disk. Norton Ghost includes Ghost.exe if you save the image file to
CD or DVD.
Download from Www.Somanuals.com. All Manuals Search And Download.
About Norton Ghost 17
Norton Ghost components
There are two methods of restoring your computer:
Norton Ghost
■
If you are able to start in Windows, then you may be able to run Norton
Ghost from Windows on your hard disk and restore your computer with the
latest backup image file that you have created.
See “Restoring your computer from an image file” on page 37.
■
Ghost.exe
If you cannot start Windows, then you must start your computer from a
recovery boot disk or CD/DVD. This starts your computer and starts Norton
Ghost in DOS. From Norton Ghost, you can access your image file and
restore your computer to the latest backup image file.
See “Restoring from an image file” on page 101.
The Ghost Boot Wizard helps you create a recovery boot disk.
See “Creating boot disks and boot images” on page 75.
Warning: Create and test a recovery boot disk before you need it. If your
computer crashes and you do not have a recovery boot disk, then you will have to
find another computer on which to create a boot disk.
Norton Ghost components
Norton Ghost includes a number of products and utilities.
Norton Ghost wizards
Norton Ghost includes Windows wizards to guide you through the basic tasks.
Download from Www.Somanuals.com. All Manuals Search And Download.
18 About Norton Ghost
Norton Ghost components
These wizards include:
Backup Wizard
The Backup Wizard lets you select a hard disk or partition to back up to an image
file.
Restore Wizard
The Restore Wizard lets you restore a hard disk or partition from an image file.
Download from Www.Somanuals.com. All Manuals Search And Download.
About Norton Ghost 19
Norton Ghost components
Clone Wizard
The Clone Wizard lets you clone a hard disk or partition directly from another
hard disk or partition.
Peer-to-Peer Wizard
The Peer-to-Peer Wizard starts Ghost.exe in the Virtual Partition with the peer-
to-peer drivers loaded.
Download from Www.Somanuals.com. All Manuals Search And Download.
20 About Norton Ghost
Norton Ghost components
Create Virtual Partition Wizard
The Create Virtual Partition Wizard restarts your computer in the Virtual
Partition in DOS with files from a selected directory. This enables you to run
DOS applications.
Run Ghost Interactively Wizard
The Run Ghost Interactively Wizard restarts your computer in DOS and runs
Ghost.exe.
Integrity Check
The image integrity check runs an integrity check on backup image files.
Download from Www.Somanuals.com. All Manuals Search And Download.
About Norton Ghost 21
Norton Ghost components
View Log
View Log lets you view logs created during Norton Ghost operations.
Norton Ghost executable
Ghost.exe runs in DOS and lets you back up, restore, and clone. Because the
executable is small with minimal conventional memory requirements, you can
run it easily from a DOS boot disk or hard drive.
Download from Www.Somanuals.com. All Manuals Search And Download.
22 About Norton Ghost
Norton Ghost components
Ghost Boot Wizard
The Ghost Boot Wizard is a Windows application that creates boot disks that
start Norton Ghost when you turn on your computer. You can create boot disks
for various cloning tasks. The wizard guides you through adding the drivers that
are needed to create a boot disk.
Ghost Explorer
Ghost Explorer is a Windows application that lets you view directories and files in
an image file. You can also add, recover, and delete individual directories and files
from a FAT16/32 file system image file.
Download from Www.Somanuals.com. All Manuals Search And Download.
About Norton Ghost 23
Norton Ghost components
Note: You can restore individual files from NTFS images, but you cannot update
NTFS images.
GDisk
GDisk is a complete replacement for the Microsoft FDISK and FORMAT utilities
that allows the following:
■
■
■
■
■
■
FAT file system formatting
Batch mode operation
Hiding and unhiding of partitions
Secure disk wiping to US Department of Defense standards
Extensive partition reporting
Boot.ini manipulation (GDisk32 only)
Two versions of GDisk are supplied:
■
■
GDisk: Runs in DOS
GDisk32: Runs from the command prompt in a Windows operating system
Download from Www.Somanuals.com. All Manuals Search And Download.
24 About Norton Ghost
Norton Ghost components
Ghost Walker
Ghost Walker assigns a statistically unique security identifier (SID) and a unique
computer name to cloned Microsoft Windows NT/2000/XP workstations. The
SID is an important part of the Windows NT/2000/XP security architecture as it
provides a unique identifier when these computers are networked. If you are
cloning more than one computer using the multiuser pack, you can use Ghost
Walker to set up each computer on a network with a unique identification, which
is mandatory on a Microsoft network.
Download from Www.Somanuals.com. All Manuals Search And Download.
26 Installing Norton Ghost
Minimum system requirements
Minimum system requirements
To install and run Norton Ghost, the minimum requirements are as follows:
IBM computer or 100% compatible
486 processor
■
■
■
■
■
■
■
VGA monitor (Super VGA recommended)
16 MB RAM (32 MB RAM recommended)
Microsoft-compatible mouse recommended
Microsoft Windows 98/2000/Me/XP or Microsoft Windows NT4 SP6a
Internet Explorer 5
Ghost.exe
Ghost.exe must be installed on a computer with the Norton Ghost minimum
requirements. However, you can run Ghost.exe on a computer with the following
minimum requirements:
■
■
■
■
■
IBM PC computer or 100% compatible
486 processor
16 MB RAM
VGA monitor
Microsoft-compatible mouse recommended
CD and DVD writing
■
CD or DVD writer supported by Norton Ghost
Supported backup media
In addition to saving a backup to a secondary partition or an internal hard disk,
Norton Ghost can also save a backup to the following external media devices:
■
■
■
■
CD-R/RW
DVD+RW/-RW/+R/-R
USB 1.1/2.0 hard drive and CD/DVD recordable devices
FireWire (iEEE) 1394 hard drive and CD/DVD recordable devices
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Norton Ghost 27
Installing Norton Ghost
■
■
■
■
■
■
Atapi tape (QIC157) devices
SCSI tape
A second computer using a peer-to-peer connection
Mapped network drive
ZIP drive
JAZ drive
To determine whether your device is supported by Norton Ghost, check that your
device is listed on the Symantec support Web site.
http:\\www.ghost.com
■
■
■
All FAT
All NTFS
EXT2/3
See “Cloning with Linux” on page 187.
Disaster recovery requirements
To restore a backup image in the event of an operating system or hard disk
failure, you must have one of the following recovery mechanisms in place before
the emergency occurs:
■
Floppy disk drive and floppy disk with the correct drivers for the selected
backup device
■
CD or DVD device and a bootable CD-ROM with the backup image created
by Norton Ghost
See “Preparing for an emergency” on page 16.
Installing Norton Ghost
The installation instructions for Norton Ghost differ depending on how you have
purchased Norton Ghost:
■
■
As a part of Norton SystemWorks Pro
Norton Ghost 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
28 Installing Norton Ghost
Installing Norton Ghost
Installing Norton Ghost if purchased with Norton SystemWorks Pro
If you have purchased Norton Ghost as part of Norton SystemWorks Pro, then
Norton Ghost is installed from the Norton SystemWorks Pro CD.
To install Norton Ghost from Norton SystemWorks
1
2
Insert the Norton SystemWorks 2003 CD into the CD-ROM drive.
In the Norton SystemWorks 2003 window, click Install Norton SystemWorks
2003.
3
4
5
Click OK to accept the Virus detection message.
Click Next.
In the License Agreement window, click I accept the license agreement, and
then click Next.
If you select I do not accept the license agreement, you cannot continue with
the installation.
6
Confirm the installation location.
To select a different location for the installed files, click Browse.
7
8
Click Next.
Select an installation type:
■
■
■
Typical: The most common programs are installed. This is the best
choice for most users.
Complete: All programs are installed. This is the best choice for users
who want to take advantage of all the product features.
Express: The most common programs are installed with the default
settings and fewer prompts.
9
In the Select Features window, select Norton Ghost 2003 and click one of the
following:
■
Will be installed on local hard drive
■
Entire feature will be installed on local hard drive
To install only Norton Ghost, click the other Norton SystemWorks
components and select Entire feature will be unavailable.
10 Click Next.
11 Continue with the type of installation you chose. After installation, you may
receive a prompt telling you that your computer needs to be restarted for the
updates to take effect.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Norton Ghost 29
Installing Norton Ghost
Installing Norton Ghost
If you have purchased Norton Ghost separately from Norton SystemWorks Pro,
then Norton Ghost is installed from the Norton Ghost CD.
To install Norton Ghost from the Norton Ghost CD
1
2
3
4
Insert the Norton Ghost CD into the CD-ROM drive.
In the Norton Ghost 2003 window, click Install Norton Ghost 2003.
In the Norton Ghost 2003 - InstallShield Wizard window, click Next.
In the License Agreement window, click I accept the license agreement, and
then click Next.
If you select I do not accept the license agreement, you cannot continue with
the installation.
5
6
7
8
In the User name field, type a user name.
In the Organization field, type an organization, if you belong to one.
Click Next.
Confirm the installation location.
To select a different location for the installed files, click Change.
9
Click Next.
10 Click Install to start the installation.
If the opening screen does not appear
Sometimes, a computer’s CD-ROM drive does not automatically start a CD.
To start the installation from the Norton Ghost CD
1
2
On your desktop, double-click My Computer.
In the My Computer dialog box, double-click the icon for your CD-ROM
drive.
3
From the list of files, double-click Ncdstart.exe.
Registering Norton Ghost
To stay informed of upcoming Symantec products, please fill out the details for
registration of Norton Ghost. If you choose not to register the software using the
Information Wizard or if registration fails for some reason, you can register on
the Symantec Web site at www.symantec.com or by using the Product
Download from Www.Somanuals.com. All Manuals Search And Download.
30 Installing Norton Ghost
Installing Norton Ghost
Registration option in the Help menu in the Norton Ghost window. On the Web
site, go to the Products page for the registration link.
To register Norton Ghost
1
In the first Registration window, select the country from which you are
registering and the country in which you live (if different), and then click
Next.
2
3
If you would like information from Symantec about Norton Ghost, select the
method by which you want to receive that information, and then click Next.
Type your name and whether you want Norton Ghost registered to you or
your company, and then click Next.
4
5
Type your address, and then click Next.
Do one of the following:
■
Answer the survey questions to help Symantec improve its products and
services, and then click Next.
■
Skip the survey by clicking Next.
6
7
Select whether you want to register Norton Ghost through the Internet or by
mail.
■
If you want to register by mail, your computer must be connected to a
printer that the Information Wizard can use to print the registration
form.
■
If you want to register using the Internet, you must be connected to the
Internet.
Click Next.
If you submitted your registration through the Internet, the Information
Wizard displays the serial number for your product.
8
9
Write down the serial number or click Print to get a copy of your registration
information for future reference.
Click Next.
10 Select whether you want to use your existing profile the next time you
register a Symantec product or type the information as part of registration.
11 Click Finish.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Norton Ghost 31
Updating Norton Ghost
Updating Norton Ghost
Symantec may provide updates for Norton Ghost. Symantec does not charge for
these updates. However, your normal Internet access fees apply.
To update Norton Ghost using LiveUpdate
1
On the Windows taskbar, click Start > Programs > Norton Ghost 2003 >
Norton Ghost.
2
3
Click LiveUpdate.
Follow the on-screen instructions.
Uninstalling Norton Ghost
Norton Ghost is uninstalled from the Control Panel in Windows.
To uninstall Norton Ghost
1
2
3
4
On the Windows taskbar, click Start > Settings > Control Panel.
In the Control Panel window, double-click Add/Remove Programs.
Click Norton Ghost.
Click Remove.
Download from Www.Somanuals.com. All Manuals Search And Download.
32 Installing Norton Ghost
Uninstalling Norton Ghost
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Chapter
Backing up, restoring,
and cloning from Norton
Ghost
This chapter includes the following topics:
■
■
■
■
■
■
■
When to use Norton Ghost in Windows
Starting Norton Ghost in Windows
Creating a backup image file
Restoring your computer from an image file
Cloning a hard disk or partition
Launching Ghost.exe peer-to-peer
Identifying a hard disk
Download from Www.Somanuals.com. All Manuals Search And Download.
34 Backing up, restoring, and cloning from Norton Ghost
When to use Norton Ghost in Windows
When to use Norton Ghost in Windows
Use Norton Ghost in Windows to do the following:
■
■
Back up your computer
Restore an image file onto your computer
You can use the Restore Wizard to restore an image file if you can still start
Windows.
■
Clone a hard disk or partition directly to another hard disk or partition
DOS for any of the following:
■
If you cannot start Windows on your computer
See “Restoring from an image file” on page 101.
■
Cloning a computer that does not have Windows installed
See “Cloning disks and partitions” on page 104.
Note: Sometimes the drive letter in Norton Ghost in DOS does not match the
drive letter in Windows.
For example:
You back up to a file, F:\test.gho. When you execute a backup task, the backup
appears in Ghost.exe as E:\test.gho.
Starting Norton Ghost in Windows
Before starting Norton Ghost, close all open programs.
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up, restoring, and cloning from Norton Ghost 35
Starting Norton Ghost in Windows
To start Norton Ghost in Windows
Do one of the following:
◆
■
On the Windows taskbar, click Start > Programs > Norton Ghost 2003
> Norton Ghost.
■
On the Windows XP taskbar, click Start > All Programs > Norton
Ghost 2003 > Norton Ghost.
Starting Norton Ghost from the tray icon
By default, Norton Ghost displays a single Windows tray icon in the system
notification area at the end of the Windows 9x/Me/NT/2000/XP taskbar. Use the
tray icon as a shortcut to open the Backup, Restore, and Clone Wizards.
Download from Www.Somanuals.com. All Manuals Search And Download.
36 Backing up, restoring, and cloning from Norton Ghost
Creating a backup image file
From the tray icon you can initiate any of the following tasks:
Launch Norton Ghost
Run the Restore Wizard
■
■
■
■
Run the Backup Wizard
View the task log
To start Norton Ghost from the tray icon
1
2
3
Move your mouse cursor over the Norton Ghost tray icon.
Right-click the tray icon.
On the tray icon menu, click the option that you want.
Creating a backup image file
You can create a backup image file of your hard disk or one or more partitions
using the Backup Wizard.
To back up a hard disk or partition
1
2
In the Ghost Basic window, click Backup, and then click Next.
In the Backup Wizard window, in the Source pane, do one of the following:
■
Select a whole disk to back up.
■
Select one or more partitions to back up.
The partitions must reside on the same disk.
3
Do one of the following:
■
Click File to back up to a file.
■
Click Recordable CD or DVD to back up to a CD or DVD drive.
Norton Ghost selects the CD or DVD drive that contains writable
media.
4
5
Click Next.
If you selected to back up to a file, click Browse to select a destination and file
name to which the disk or partition(s) is to be backed up.
6
Click Next.
Download from Www.Somanuals.com. All Manuals Search And Download.
Restoring your computer from an image file
7
If this is the first time that you have used Norton Ghost on this computer, in
the Add Ghost Disk Identification dialog box, identify the disk.
If you have previously used Norton Ghost on this computer, then this dialog
box does not appear.
8
9
If you want to set advanced settings for the backup, then click Advanced
Settings.
See “Setting Norton Ghost options and defaults” on page 46.
Click Next.
10 In the Important Information dialog box, if you do not want to view this
11 In the Disaster Recovery dialog box, click Continue.
This dialog box warns you to ensure that you can run Ghost.exe and access
your image file once it has been created. You may need to create a recovery
boot disk.
See “Creating a recovery boot disk” on page 73.
■
Run Now: Creates the backup image file.
Your computer is restarted and the backup image file is created.
■
Disaster Recovery: Starts the Ghost Boot Wizard and creates a recovery
boot disk.
See “Creating a recovery boot disk” on page 73.
Restoring your computer from an image file
hard disk, partition, or external media using the Restore Wizard from within
Windows.
If you cannot start Windows, then you must use Ghost.exe to restore your hard
disk or partition.
See “Restoring from an image file” on page 101.
Download from Www.Somanuals.com. All Manuals Search And Download.
38 Backing up, restoring, and cloning from Norton Ghost
Restoring your computer from an image file
To restore a disk or partition
1
2
In the Restore Wizard window, click Browse, and find the image file from
which to restore.
3
If you want to view the contents of the image file in Ghost Explorer, click
Open image in Ghost Explorer.
See “Viewing image files” on page 119.
4
5
Click Next.
In the left pane, select the image file or partition within the image file to
restore.
6
In the right pane, select the destination hard disk or partition that is to be
overwritten.
7
8
Click Next.
The Overwrite partition warning dialog box appears if you are overwriting
any of the following:
■
The Ghost installation
■
Click Next to continue.
9
If this is the first time that you have used Norton Ghost on this computer, in
the Add Ghost Disk Identification dialog box, identify the disk.
If you have previously used Norton Ghost on this computer, then this dialog
box does not appear.
10 If you want to set advanced settings for the restore, then click Advanced
Settings.
See “Setting Norton Ghost options and defaults” on page 46.
11 Click Next.
12 In the Important Information dialog box, if you do not want to view this
warning again, click Don’t show this screen again, and then click Next.
13 Click Run Now to restore the image file to the selected hard disk or partition.
Your computer is rebooted and the restore operation completed.
Warning: The destination disk or partition is completely overwritten with
no chance of recovering any data.
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up, restoring, and cloning from Norton Ghost 39
Cloning a hard disk or partition
Cloning a hard disk or partition
You can clone a hard disk directly to another hard disk or a partition directly to
another partition.
To create a clone task
1
2
In the Ghost Advanced window, click Clone, and then click Next.
In the Clone Wizard window, in the left pane, do one of the following:
■
Click a disk to select it as the source for the clone operation.
Click a partition to select it as the source for the clone operation.
■
3
In the right pane, do one of the following:
■
Click a disk to select it as the destination for the clone operation.
Click a partition to select it as the destination for the clone operation.
■
Warning: The destination disk or partition is completely overwritten with
no chance of recovering any data.
4
5
Click Next.
The Overwrite partition warning dialog box appears if you are overwriting
any of the following:
■
The Ghost installation
■
Click Next to continue.
6
If this is the first time that you have used Norton Ghost on this computer, in
the Add Ghost Disk Identification dialog box, identify the disk.
If you have previously used Norton Ghost on this computer, then this dialog
box does not appear.
7
8
If you want to set advanced settings for the clone, then click Advanced
Settings.
See “Setting Norton Ghost options and defaults” on page 46.
Click Next.
Download from Www.Somanuals.com. All Manuals Search And Download.
40 Backing up, restoring, and cloning from Norton Ghost
Launching Ghost.exe peer-to-peer
9
In the Important Information dialog box, if you do not want to view this
warning again, click Don’t show this screen again, and then click Next.
10 Click Run Now to start the clone operation.
Ensure that all applications on your computer are closed before you run the
clone operation.
Your computer is restarted and the destination hard disk or partition is
cloned from the source hard disk or partition.
Launching Ghost.exe peer-to-peer
From Norton Ghost you can launch Ghost.exe over a USB, LPT, or TCP/IP peer-
to-peer connection. Once you have established the settings for the connection,
Both computers must be running Ghost.exe for you to make the peer-to-peer
connection. On your second computer, you can run Norton Ghost as described
in this section, or you can restart it from a Peer-to-Peer Network Boot Disk or
Standard Boot Disk.
See “Boot disks with network support” on page 79 and “Standard boot disks” on
page 76.
To run Ghost.exe peer-to-peer
To run Ghost.exe peer-to-peer using USB
1
In the Ghost Basic window, click Ghost Advanced, and then click Peer-to-
Peer.
2
3
4
Click USB peer-to-peer.
Click Next.
If you want to set advanced settings, then click Advanced Settings.
See “Setting Norton Ghost options and defaults” on page 46.
5
6
If you want to set advanced USB peer-to-peer settings, then click USB driver
settings.
See “Installing USB peer-to-peer drivers” on page 57.
In the Important Information dialog box, if you do not want to view this
warning again, click Don’t show this screen again, and then click Next.
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up, restoring, and cloning from Norton Ghost 41
Launching Ghost.exe peer-to-peer
7
In the Disaster Recovery window, select one of the following:
■
Launch Tutorials: Opens the tutorial index.
From the tutorials, you can select a tutorial that demonstrates how to
create a recovery boot disk.
■
Continue: Returns to the Create Task dialog box.
This dialog box warns you to ensure that you can run Ghost.exe and access
your image file once it has been created. You may need to create a recovery
boot disk.
8
Select one of the following:
■
■
Run Now: Restarts your computer into DOS and starts Ghost.exe.
Disaster Recovery: Starts the Ghost Boot Wizard and creates a recovery
boot disk.
See “Creating a recovery boot disk” on page 73.
To run Ghost.exe peer-to-peer using TCP
1
In the Ghost Basic window, click Ghost Advanced, and then click Peer-to-
Peer.
2
3
4
Click TCP peer-to-peer.
Click Next.
If you want to set advanced settings, then click Advanced Settings.
See “Setting Norton Ghost options and defaults” on page 46.
5
6
If you want to set TCP/IP driver settings, then click TCP/IP Driver Settings.
See “Setting TCP/IP drivers” on page 54.
In the Important Information dialog box, if you do not want to view this
warning again, click Don’t show this screen again, and then click Next.
Download from Www.Somanuals.com. All Manuals Search And Download.
42 Backing up, restoring, and cloning from Norton Ghost
Launching Ghost.exe peer-to-peer
7
In the Disaster Recovery window, select one of the following:
■
Launch Tutorials: Opens the tutorial index.
From the tutorials, you can select a tutorial that demonstrates how to
create a recovery boot disk.
■
Continue: Returns to the Create Task dialog box.
This dialog box warns you to ensure that you can run Ghost.exe and access
your image file once it has been created. You may need to create a recovery
boot disk.
8
Select one of the following:
■
■
Run Now: Restarts your computer into DOS and starts Ghost.exe.
Disaster Recovery: Starts the Ghost Boot Wizard and creates a recovery
boot disk.
See “Creating a recovery boot disk” on page 73.
To run Ghost.exe peer-to-peer using LPT
1
In the Ghost Basic window, click Ghost Advanced, and then click Peer-to-
Peer.
2
3
4
Click LPT peer-to-peer.
Click Next.
If you want to set advanced settings, then click Advanced Settings.
See “Setting Norton Ghost options and defaults” on page 46.
5
6
If you want to set advanced LPT peer-to-peer driver settings, then click LPT
driver settings.
See “Setting LPT peer-to-peer drivers” on page 55.
In the Important Information dialog box, if you do not want to view this
warning again, click Don’t show this screen again, and then click Next.
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up, restoring, and cloning from Norton Ghost 43
Identifying a hard disk
7
In the Disaster Recovery window, select one of the following:
■
Launch Tutorials: Opens the tutorial index.
From the tutorials you can select a tutorial that demonstrates how to
create a recovery boot disk.
■
Continue: Returns to the Create Task dialog box.
This dialog box warns you to ensure that you can run Ghost.exe and access
your image file once it has been created. You may need to create a recovery
boot disk.
8
Select one of the following:
■
■
Run Now: Restarts your computer into DOS and starts Ghost.exe.
Disaster Recovery: Starts the Ghost Boot Wizard and creates a recovery
boot disk.
See “Creating a recovery boot disk” on page 73.
Identifying a hard disk
Before you can use Norton Ghost on a hard disk, Norton Ghost must identify the
disk. You can do this during any backup, restore, or clone operation.
This dialog box appears during a backup, restore, or clone operation if you have
not previously identified the hard disk.
To identify a disk
◆
In the Add Ghost Disk Identification dialog box, click OK to identify all hard
disks.
Download from Www.Somanuals.com. All Manuals Search And Download.
44 Backing up, restoring, and cloning from Norton Ghost
Identifying a hard disk
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Chapter
Setting options and
defaults
This chapter includes the following topics:
■
■
■
■
■
■
Setting Norton Ghost options and defaults
Running your computer from the Virtual Partition
Checking the integrity of an image file
Viewing the task log
Starting Ghost.exe
What to do if a task fails
Download from Www.Somanuals.com. All Manuals Search And Download.
46 Setting options and defaults
Setting Norton Ghost options and defaults
Setting Norton Ghost options and defaults
Norton Ghost lets you set defaults for the tasks that you run from the wizards.
You can change many of these defaults in the wizards as you create a task.
Norton Ghost
default options
Some options can only be set as you create the task in the wizard.
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Adding command-line switches to a task
Setting display options
Setting the DOS version
Adding free space to the Virtual Partition
Setting external storage device drivers
Setting TCP/IP drivers
Setting LPT peer-to-peer drivers
Installing extra drivers
Installing USB peer-to-peer drivers
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting options and defaults 47
Setting Norton Ghost options and defaults
Adding command-line switches to a task
You can add command-line switches to a task to alter its operation.
To add command-line switches to a task
1
■
To set this option as a default, in the Ghost Basic window, click Options.
■
To add command-line switches while running a Windows wizard task,
in the settings window, click Advanced Settings.
2
3
On the Ghost Command Line tab, type the extra command-line switches.
See “Using Norton Ghost with switches” on page 154.
Click OK.
Warning: The syntax of your command line is not checked when the task
runs. Therefore, review these instructions carefully to avoid errors. The
consequences of an error could be serious.
Assigning a drive letter to a CD/DVD drive
You can assign a drive letter to a CD or DVD drive. This lets you select a drive
letter when restoring an image file from a CD/DVD.
Use this option if you are restoring an image file that was written to a CD/DVD
using a tool other than Norton Ghost.
To assign a drive letter to a CD/DVD drive
1
Do one of the following:
■
To set this option as a default, in the Ghost Basic window, click Options.
■
To assign a drive letter to a CD or DVD drive while running a Windows
wizard task, in the Advanced Settings window, click Advanced Settings.
2
3
On the CD Driver tab, click Assign drive letters to CD/DVD drives.
Click OK.
Setting the options for a mapped network drive
You can set the options for connecting to a mapped network drive.
Download from Www.Somanuals.com. All Manuals Search And Download.
48 Setting options and defaults
Setting Norton Ghost options and defaults
To set the options for a mapped network drive
1
While running a Windows wizard task, in the Advanced Settings window,
click Advanced Settings.
2
3
Click Map network drive.
Do one of the following:
■
Select a network card from the drop-down list.
Norton Ghost displays any installed drivers that it detects. Select the
network driver for the particular make and model of the network card
■
Click Browse to open the Ghost Boot Wizard and select a network card.
From the Ghost Boot Wizard, you can add a network card. If your
network card is not on the list, you can modify a network card template.
See “Selecting a template” on page 84 and “Adding network drivers to
the Ghost Boot Wizard” on page 86.
4
Select one of the following:
■
Use DHCP: Use this option if your network contains a DHCP server.
■
Static IP Address: Complete the fields below this option if your network
does not contain a DHCP server.
5
6
7
8
In the Network resource field, type a network resource.
In the User name field, type a user name.
In the Domain field, type a domain name.
Click OK.
Setting display options
You can set some default display options.
To set display options
1
2
3
In the Ghost Basic window, click Options.
Click Display.
Check Show Norton Ghost tray icon on start up to display the Norton Ghost
icon in the taskbar.
4
Check Show disaster recovery warning before running a Norton Ghost task
to display the Disaster Recovery dialog box before running a task.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting options and defaults 49
Setting Norton Ghost options and defaults
5
6
Check Show information screen about the DOS version of Ghost to display
the warning that Norton Ghost restarts into DOS while running a task.
Click OK.
Setting the DOS version
By default, Norton Ghost includes PC-DOS in the Virtual Partition. However,
some computer models may not start from a Virtual Partition that contains PC-
DOS. If your computer does not start from the Virtual Partition, set the default
option to MS-DOS.
You must provide MS-DOS on a floppy disk formatted on a Windows 95/98
computer before you can run Norton Ghost with MS-DOS.
See “Providing MS-DOS” on page 89.
To set DOS files
To select a DOS version
1
2
In the Ghost Basic window, click Options.
On the DOS Type tab, select one of the following:
■
Use PC-DOS: Includes PC-DOS in the Virtual Partition.
■
Use MS-DOS: Includes MS-DOS in the Virtual Partition.
3
Click OK.
To install MS-DOS
1
Insert the MS-DOS formatted floppy disk into drive A of the computer on
which Norton Ghost is running.
In the DOS Type window, click Get MS-DOS Files.
Click OK.
2
3
To uninstall MS-DOS
1
2
In the DOS Type window, click Remove MS-DOS Files.
Click OK.
Installing MS-DOS Client files
If you are using the mapped network drive functionality and MS-DOS, you must
include the Microsoft DOS Client files. You must install the files on the computer
before you can include them in the Virtual Partition.
Download from Www.Somanuals.com. All Manuals Search And Download.
50 Setting options and defaults
Setting Norton Ghost options and defaults
The following files are required:
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
EMSBFR.EXE
LMHOSTS
NEMM.DOS
NET.EXE
NET.MSG
NETBIND.COM
NETH.MSG
NETWORKS
NMTSR.EXE
PROTMAN.DOS
PROTMAN.EXE
PROTOCOL
TCPDRV.DOS
TCPTSR.EXE
TCPUTILS.INI
TINYRFC.EXE
UMB.COM
IFSHLP.SYS
EMM386.EXE
HIMEM.SYS
WFWSYS.CFG
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting options and defaults 51
Setting Norton Ghost options and defaults
To install the Microsoft DOS Client files
1
2
3
In the Ghost Basic window, click Options.
In the Norton Ghost 2003 Options dialog box, click DOS Type.
Insert a floppy disk containing the MS-DOS LAN Client files into drive A,
and then click Supply MS-DOS LAN Client Files.
Setting the image integrity check default
image file after it has been created and before it is restored.
Some CD-RW drives eject a CD once an image has been saved to it. If this is
preventing the integrity check, then ensure that this option is not selected, and
perform an integrity check using the Image Integrity Check Wizard.
See “Checking the integrity of an image file” on page 58.
To set Norton Ghost to perform an integrity check on an image file
1
2
3
4
In the Ghost Basic window, click Options.
In the Norton Ghost 2003 Options dialog box, click Image Integrity check.
Check Always perform an image integrity check to set the default.
Click OK.
Setting a compression level
A compression level can be set as a default or from a wizard. You can set the
compression level to None, Fast, or High. Compression is set to Fast by default.
See “Image files and compression” on page 62.
Download from Www.Somanuals.com. All Manuals Search And Download.
52 Setting options and defaults
Setting Norton Ghost options and defaults
To set the compression level
1
Do one of the following:
■
■
To set the default compression level, in the Ghost Basic window, click
Options.
To set the compression level while running a Windows wizard task, in
the Advanced Settings window, click Advanced Settings.
2
3
On the Compression tab, select one of the following:
■
■
■
None: No compression (high speed)
Fast: Low compression (medium speed)
High: High compression (slower speed)
Click OK.
Assigning a password to an image file
You can assign a password to an image file. The password is entered when the
image file is created. Then, each time the image file is accessed in Ghost.exe, you
are prompted to enter the password.
To assign a password
1
2
Do one of the following:
■
■
To set the default to create an image password, in the Ghost Basic
window, click Options.
To set the option to create an image password while running a Windows
wizard task, in the Advanced Settings window, click Advanced Settings.
On the Image password tab, check Prompt for an image password to set the
option to prompt for a password when the image file is created.
Adding free space to the Virtual Partition
You can specify additional space to be added to the Virtual Partition. This is
added to the Virtual Partition when it is created.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting options and defaults 53
Setting Norton Ghost options and defaults
To specify additional free space in the Virtual Partition
1
Do one of the following:
■
■
To set the default to specify additional free space, in the Ghost Basic
window, click Options.
To specify additional free space while running a Windows wizard task,
in the Advanced Settings window, click Advanced Settings.
2
3
In the Norton Ghost 2003 Options window, on the Virtual Partition Free
Space tab, in the Required Free Space field, select an additional amount of
free space (in MB) to add to the Virtual Partition.
Click OK.
Installing SCSI drivers
Norton Ghost automatically installs Adaptec SCSI drivers in the Virtual Partition
if it finds a SCSI hard disk. The SCSI drivers allow Norton Ghost to access any
default preference or install the drivers from a wizard. You can scan for Adaptec
SCSI cards and let Norton Ghost select the correct drives.
If you are using a card other than Adaptec, then you must manually install the
correct drivers.
See “Installing extra drivers” on page 56.
To install SCSI drivers
1
Do one of the following:
■
■
To set the default installation of SCSI drivers, in the Ghost Basic
window, click Options.
To install the SCSI drivers while running a task, in the Advanced
Settings window, click Advanced Settings.
2
3
Check the SCSI drivers that you want to install.
To let Norton Ghost scan for Adaptec SCSI cards, click Auto-Detect for SCSI
drivers.
4
Click OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
54 Setting options and defaults
Setting Norton Ghost options and defaults
Setting external storage device drivers
Norton Ghost usually installs USB and FireWire drivers in the Virtual Partition if
manually as a default option or while running a Windows wizard task.
Note: Do not use this option if you want to connect to another computer using
peer-to-peer.
See “Installing USB peer-to-peer drivers” on page 57.
To install external device drivers
1
2
Do one of the following:
■
■
To set the default installation of external drivers, in the Ghost Basic
window, click Options.
To install the external device drivers while running a Windows wizard
task, in the Advanced Settings window, click Advanced Settings.
On the External Storage tab, select one of the following:
■
No USB Drivers: Does not install USB drivers
■
USB 1.1 Drivers: Installs USB 1.1 drivers
Select this option if any of your cards or chipsets are USB 1.1.
■
USB 2.0 Drivers: Installs USB 2.0 drivers
Do not select this option if any of your cards or chipsets are USB 1.1.
3
4
If you want to install FireWire drivers to the Virtual Partition, then click
Firewire Support.
If you want to assign a drive letter to the external storage device, then click
Assign drive letters.
By default, a drive letter is assigned to an external storage device. This option
assigns a drive letter to USB and FireWire devices in DOS.
5
Click OK.
Setting TCP/IP drivers
Norton Ghost automatically searches for and installs the correct TCP/IP drivers
for your hardware setup. However, you can set the TCP/IP configuration
manually if your task fails or you need settings that are different from the
automatic setup. If your computer is running Windows NT 4 and you are using
TCP/IP, then you must manually set the network driver.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting options and defaults 55
Setting Norton Ghost options and defaults
To install TCP/IP drivers
1
To set the default installation of TCP/IP drivers, in the Ghost Basic window,
click Options.
2
3
In the Norton Ghost 2003 Options dialog box, click TCP/IP Driver Settings.
Do one of the following:
■
Select a network card from the drop-down list.
Norton Ghost displays any detected installed drivers. Select the network
driver for the particular make and model of the network card that is
installed on the computer.
■
Click Browse to open the Ghost Boot Wizard and select a network card.
From the Ghost Boot Wizard you can add a network card. If your
network card is not on the list, you can modify a network card template.
See “Selecting a template” on page 84 and “Adding network drivers to
the Ghost Boot Wizard” on page 86.
4
5
Select one of the following:
■
Use DHCP: Use this option if your network contains a DHCP server.
■
Static IP Address: Complete the fields below this option if your network
does not contain a DHCP server.
Click OK.
Setting LPT peer-to-peer drivers
Norton Ghost automatically installs default LPT peer-to-peer drivers for your
hardware setup. However, you can set the LPT configuration manually if your
task fails or you need settings that are different from the automatic setup.
Download from Www.Somanuals.com. All Manuals Search And Download.
56 Setting options and defaults
Setting Norton Ghost options and defaults
To install LPT peer-to-peer drivers
1
To set the default installation of LPT drivers, in the Ghost Basic window, click
Options.
2
3
In the Norton Ghost 2003 Options dialog box, click LPT Driver Settings.
Select a mode.
The default mode for an LPT connection is ECP/EPP High Speed. If you are
having problems with your LPT connection, set the mode to Bidirectional
8bit or Bidirectional 4bit. The next time that you create a boot disk, the mode
is reset to the default, ECP/EPP High Speed.
4
5
Select a port.
If you have multiple parallel ports and want to connect using a port other
than the default LPT1, use the LPT port option to specify the port into which
your cable is plugged.
Click OK.
Installing extra drivers
You can install drivers that are not included with Norton Ghost. You can also
modify Autoexec.bat and Config.sys, which are installed in the Virtual Partition.
To install extra drivers
1
Do one of the following:
■
■
To set the default installation of extra drivers, in the Ghost Basic
window, click Options.
To install the extra drivers while running a Windows wizard task, in the
Advanced Settings window, click Advanced Settings.
2
3
4
On the User files tab, click Add Files to add additional drivers.
Click Add Directory to add additional directories.
In the AUTOEXEC.BAT Additions field, type any additional Autoexec.bat
entries for the driver.
5
6
In the CONFIG.SYS Additions field, type any additional Config.sys entries
for the driver.
Click OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting options and defaults 57
Running your computer from the Virtual Partition
Installing USB peer-to-peer drivers
You can select USB peer-to-peer drivers to install into the Virtual Partition. In
most cases, you do not need to alter the driver’s default. However, if you have
problems connecting using peer-to-peer, then select the other options and retry
the task.
To select USB peer-to-peer drivers
1
Do one of the following:
■
■
To set the default installation of extra drivers, in the Ghost Basic
window, click Options, and then click USB peer-to-peer settings.
To install the USB drivers while running a Peer-to-Peer Wizard task, in
the Advanced Settings window, click USB peer-to-peer settings.
2
Select one of the following:
■
All drivers: Installs all USB peer-to-peer drivers into the Virtual
Partition.
■
■
UHCI driver: Installs only UHCI drivers into the Virtual Partition.
OHCI driver: Installs only OHCI drivers into the Virtual Partition.
3
Click OK.
Running your computer from the Virtual Partition
From Norton Ghost you can restart your computer into the Virtual Partition.
The Virtual Partition is created in DOS and includes the files that you have saved
in a selected folder. Once you have created a Virtual Partition from a folder, you
can run any application that you have provided in the selected folder.
The Virtual Partition is created with the following files:
■
■
Ghreboot.exe
This executable file lets you restart your computer back into Windows.
Selected driver settings
You can select drivers to include in the Virtual Partition that will let you
access external hardware.
■
DOS applications stored in the selected folder
Any DOS applications that you provided in the selected folder are bundled
and included in the Virtual Partition.
If you include Autoexec.bat and Config.sys in the selected folder, then they are
modified by Norton Ghost when the Virtual Partition is created.
Download from Www.Somanuals.com. All Manuals Search And Download.
58 Setting options and defaults
Checking the integrity of an image file
Before you create the Virtual Partition, you must create a folder that contains the
files that you want included in the Virtual Partition.
To create the Virtual Partition from a folder
1
In the Ghost Basic window, click Ghost Advanced, and then click Create
Virtual Partition.
2
3
4
5
6
Click Next.
In the Required Free Space field, set the size in MB of the Virtual Partition.
Click Next.
If you want to set advanced driver settings, then click Advanced Settings.
See “Setting Norton Ghost options and defaults” on page 46.
7
8
Click Next.
Click Run Now to restart your computer in the Virtual Partition.
The task summary displays the size of the folder that you have selected. The
Virtual Partition cannot be smaller than the folder size.
Restarting your computer from the Virtual Partition
To restart your computer back into Windows from the Virtual Partition, you
must run the Ghreboot executable.
You may also need to run Ghreboot if a task has failed and your computer is left
in the Virtual Partition.
To restart your computer in Windows
1
2
At the command line, type ghreboot.
Press Enter.
Checking the integrity of an image file
You can check the integrity of a Ghost image file. An integrity check ensures that
the data read from the image file is the same as the data written to the image file.
Norton Ghost performs a dummy restore of the image file. It does not check that
the data on the disk is the same as the data in the image file.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting options and defaults 59
Viewing the task log
To check the integrity of an image file
1
In the Ghost Basic window, click Ghost Advanced, and then click Image
Integrity Check.
2
3
Click Next.
In the Create Image Integrity Check Wizard window, click Browse and find
the image file that you want to verify.
4
If you want to view the contents of the image file in Ghost Explorer, click
See “Viewing image files” on page 119.
5
6
Click Next.
If you want to set advanced settings for the verification, then click Advanced
Settings.
See “Adding command-line switches to a task” on page 47.
7
8
Click Next.
In the Important Information dialog box, if you do not want to view this
warning again, click Don’t show this screen again, and then click Next.
9
Click Run Now to start the image verification.
Viewing the task log
The task log displays the tasks performed from the Norton Ghost wizards.
To view the task log
1
2
In the Ghost Basic window, click View Log.
In the Task Log Viewer window, select a log entry and click View Log.
Starting Ghost.exe
You can start Ghost.exe from Windows. This option restarts your computer in
DOS and opens Ghost.exe, which lets you run Norton Ghost interactively.
Download from Www.Somanuals.com. All Manuals Search And Download.
60 Setting options and defaults
What to do if a task fails
To start Ghost.exe
1
Interactively.
2
3
Click Next.
If you want to set advanced settings for the backup, then click Advanced
Settings.
See “Setting Norton Ghost options and defaults” on page 46.
4
5
Click Next.
In the Important Information dialog box, if you do not want to view this
warning again, click Don’t show this screen again, and then click Next.
6
In the Disaster Recovery window, select one of the following:
■
Launch Tutorials: Opens the tutorial index.
From the tutorials, you can select a tutorial that demonstrates how to
create a recovery boot disk.
■
Continue: Returns to the Run Ghost Interactively Wizard.
This dialog box warns you to ensure that you can run Ghost.exe and access
your image file once it has been created. You may need to create a recovery
boot disk.
7
Select one of the following:
■
■
Run Now: Restarts your computer into DOS and launches Ghost.exe.
Disaster Recovery: Starts the Ghost Boot Wizard and creates a recovery
boot disk.
See “Creating a recovery boot disk” on page 73.
What to do if a task fails
If a Norton Ghost task fails, you are prompted to select one of the following
options:
■
■
■
Exit to DOS: Closes Ghost.exe and returns to DOS.
Return to Windows: Restarts your computer into Windows.
Retry the operation: Executes the task again.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Chapter
This chapter includes the following topics:
■
■
■
■
■
■
■
■
About Norton Ghost image files
Image files and compression
Image files and CRC32
Image files and volume spanning
Image files and tape drives
GoBack and Norton Ghost
Dynamic disks in Windows 2000/XP
Hibernation and swap files
Download from Www.Somanuals.com. All Manuals Search And Download.
62 Image file options
About Norton Ghost image files
About Norton Ghost image files
The image files created with Norton Ghost have a .gho or .ghs extension by
default. They contain the entire disk or partitions of the disk. Image files support
the following:
■
■
■
■
Various levels of compression
CRC32 data integrity checking
Splitting of media files
Spanning across volumes
Norton Ghost images contain only the actual data on a disk. If you have a 9 GB
drive with only 600 MB of data, the Norton Ghost image is approximately 600
MB, and is smaller if you use compression.
If you also use the Ghost Explorer application, an image file companion utility,
you can recover individual files selectively from these image files without
restoring the complete disk or partition.
Image files created in Norton Ghost support several levels of data compression.
When Norton Ghost is in interactive mode, three compression options are
available: none, fast, and high. The Norton Ghost command-line switch -z
provides access to nine levels of compression.
See “Command-line switches” on page 153.
As a rule, the more compression you use, the slower Norton Ghost operates.
However, compression can improve speed when there is a data transfer
bottleneck. There is a big difference in speed between high compression and no
compression when creating an image file on a local disk. Over a network
connection, fast compression is often as fast as, or faster than, no compression.
Over a parallel cable, high compression is often faster than no compression
because fewer bytes are sent over the cable. Decompression of high-compressed
images is much faster than the original compression. The level of compression
that you select depends on your individual requirements.
Download from Www.Somanuals.com. All Manuals Search And Download.
Image file options 63
Image files and CRC32
Performance expectations on a network
One advantage of Norton Ghost is speed. Many factors affect performance. There
are ways to gauge whether Norton Ghost is running optimally.
When you use Norton Ghost across a network, use the fast compression option.
If disk space is at a premium, you can use higher compression, but it can affect
speed.
Image files and CRC32
Cyclic Redundancy Checking (CRC) is a data error checking technique. CRC
ensures that the original data written to the image file is the same as the data on
the disk. CRC32 is a CRC technique that uses a 32-bit value to store error
checking information.
When an image file is created, CRC32 details are embedded into the file to ensure
that image file corruption is detected when the image is restored to disk. CRC32
is currently included on a file-by-file basis with FAT partitions and on a volume
basis for NTFS partitions.
In addition to image file error detection, the CRC values are used to verify that
to detect bad sector writes and other drive anomalies that may be missed during
normal imaging checks.
You can generate a text file that contains CRC values and associated file attributes
using the -CRC32 command-line switch.
See “Command-line switches” on page 153.
Image files and volume spanning
Images can be contained in a single file or spanned across a number of files.
Standard image files
Standard image files consist of a single file that contains the contents of the
complete disk or required partitions. This type of image file is stored on other
hard drives, tape, CD, or DVD drives where the volume is large enough to hold
the complete image file.
Download from Www.Somanuals.com. All Manuals Search And Download.
64 Image file options
Image files and volume spanning
Limitations on the image file size
The default (and maximum) image file size is 2GB. However, by using
size-limited, multisegment image files, you can take an image of a disk or
partition that is larger than 2 GB.
Norton Ghost does support IDE drives larger than 128 GB. However, at the time
of this printing, no operating system supports these large drives.
Size-limited image files
There are situations in which it is not practical to have a standard image file.
Norton Ghost can split an image file into segments (known as spans) that are
limited to a user-specified size. This option is most commonly used to limit span
sizes to 620 MB for later transfer to a CD-ROM disc.
Spanned image files
Spanned image files are similar to size-limited image files. The difference is that
each segment file (or span) of the image file is limited by the actual volume size of
the media to which the image is being saved. This lets you specify a drive and file
name and lets Norton Ghost determine when to request another volume or
location for the remaining data. This is very useful when using ZIP, JAZ, LS120
Superdisk, CD-R/RW, and other drive types.
Spanning must be executed locally. If you try to span over a peer-to-peer
connection (LPT, USB, TCP/IP), a disk full error message appears. However, size
limiting can be used in all situations.
Norton Ghost also allows size limiting of spans when spanning volumes to ensure
that no span exceeds the maximum size.
With all image files, the only constraint on the selection of the destination volume
is that it must not be part of the source selection. For example, it cannot be on a
source disk or partition if that disk or partition is to be included in the image.
The spanned files are named according to Microsoft application guidelines. For
example:
■
■
■
First file: Filename.gho
Second file: Filen001.ghs
Third file: Filen002.ghs
Download from Www.Somanuals.com. All Manuals Search And Download.
Image file options 65
Image files and volume spanning
You can use the -cns switch for an alternative naming standard. For example:
■
■
■
First file: Image.gho
Second file: Image.001
Third file: Image.002
Spanning across multiple volumes and limiting span sizes
When you create an image file from a disk or partition, the destination drive
might have insufficient space to store the image file. If Norton Ghost determines
that this is the case, it alerts you and asks whether to enable spanning. Norton
Ghost assumes that compression reduces the size of the image by one-third when
it determines whether the image will fit. Alternatively, you can use the -span and
-split command-line switches to configure Norton Ghost to use image file size
limiting.
See “Command-line switches” on page 153.
Before it saves the disk contents to the image file, Norton Ghost shows the source
and destination details and offers a chance to cancel. The default is to cancel.
Once the process starts, the image file creation continues until the destination
volume is full.
If you started spanning onto a JAZ disk and want to span a 3.0 GB drive onto JAZ
disks, you can choose to continue on JAZ disks. If you want to span across
different forms of media, you can select a different type of media once the first
portion of the span has completed. You cannot mix CD/DVD media with other
types of media, such as JAZ or hard disk.
Record where the span segments are saved and the segment file names. Norton
Ghost does not record the locations and file names you selected.
Information about the partitions is stored at the start of the image file. This is
updated at the end of the Ghost process, which might require you to reinsert the
first disk in the span set. Norton Ghost prompts you for the first disk in the span
set and for subsequent volumes when restoring from an image.
Restoring from a spanned image
The process when restoring a disk or partition from a spanned image file is the
same as restoring from an unspanned image file. However, during the restoration
of the spanned image file, you are prompted for the locations of the image file
spans. You must know the span segment locations and file names.
Download from Www.Somanuals.com. All Manuals Search And Download.
66 Image file options
Image files and tape drives
You can continue on the same form of media. For example, if you originally
can replace the disk and continue from JAZ disks. Alternatively, you can restore
from different media types.
Norton Ghost automatically restores spanned images without prompting if it can
find the next span.
See “Adding switches to your Ghost operation” on page 108.
Image files and tape drives
The Backup, Restore, and Clone Wizards do not support tape drives. You can
back up, restore, and clone using Ghost.exe. Ghost.exe support of SCSI tape
drives allows the storage of a single image file on a tape. When the image is
written to the tape, Ghost.exe uses no associated file system, which means that
you are unable to access the tape from a drive letter as if it were another storage
drive. SCSI tapes do not support spanning to multiple tapes.
When you use tape drives with Ghost.exe, you can select the tape drive as the
source or destination device in the File Locator window. Each SCSI tape device is
shown as MTx, where x is a number starting at 0 and increasing incrementally for
each drive present. For example, the following screen shows a tape drive MT0
available for use.
For Ghost.exe to access SCSI tape drives, a DOS ASPI driver must be installed
prior to use.
See “Standard boot disks” on page 76.
Download from Www.Somanuals.com. All Manuals Search And Download.
Image file options 67
GoBack and Norton Ghost
Ghost.exe in its default mode performs well with most SCSI tape devices. In some
situations with older SCSI tape devices and possibly with unreliable tapes,
Ghost.exe may need to be configured to slow down or alter the way it uses the
tape device.
See “Command-line switches” on page 153.
Note: Ghost Explorer cannot access an image stored on tape.
GoBack and Norton Ghost
If GoBack is installed on your computer, then you cannot directly create image
files or restore your computer.
You must disable GoBack before you use Norton Ghost wizards.
GoBack and Ghost.exe
To run Ghost.exe with GoBack, do one of the following:
■
Uninstall GoBack and then run Ghost.exe as usual to take an image or restore
a computer.
■
To take an image of your computer, in the GoBack Boot Screen, select the
option to start your computer from a floppy disk with the GoBack drivers
loaded. You can then use a Ghost boot disk to start Ghost.exe and take an
image file.
See the GoBack user documentation.
See “Creating a backup image file” on page 97.
■
To restore your computer, start your computer from a floppy disk. You can
then use a Ghost boot disk to start Ghost.exe and restore your computer.
See “Restoring from an image file” on page 101.
Download from Www.Somanuals.com. All Manuals Search And Download.
68 Image file options
Dynamic disks in Windows 2000/XP
Dynamic disks in Windows 2000/XP
Norton Ghost supports backing up, restoring, and cloning simple or mirrored
volumes on dynamic disks. Spanned, striped, and RAID-5 volumes are not
supported by Norton Ghost. You can back up an image of a partition on a disk in
a dynamic disk set to an image file. If you back up a disk, then all of the partitions
that Ghost supports on the disk, and only those partitions, are backed up to an
image file.
Note: Norton Ghost supports simple volumes in a contiguous space. If a
partition is not of this type, then it is not included in the image file.
Operations that support dynamic disks are as follows:
■
■
■
■
■
■
■
■
Partition to partition
Partition to image
Disk to disk
Disk to image
Check image
Check disk
CRC32
CRC32 verify
disk. After you have restored the image file to a basic disk, you can then use
Windows 2000 Disk Manager to convert the disk to a dynamic disk.
To delete a dynamic disk, use GDisk. Use the switch gdisk /mbr /wipe to delete all
partitions from the disk. This method destroys all data on the disk.
See “Reinitializing the Master Boot Record” on page 132.
You can also take a disk image of a dynamic disk if you use the image all (-ia)
switch. The -ia switch performs a sector-by-sector copy of the entire disk. The
disk on which the image is to be restored must be identical to the source disk in
every way. This function is only useful for creating a backup. If you restore an
image created using -ia onto a drive with different geometry, Windows 2000
cannot interpret the dynamic disk.
Download from Www.Somanuals.com. All Manuals Search And Download.
Image file options 69
Hibernation and swap files
If you restore an -ia disk image of a dynamic disk onto a SCSI hard drive and you
see a Destination drive too small message, you must load the ASPI driver for the
SCSI card. Without an ASPI driver, Norton Ghost does not always detect the
correct size of the SCSI drive and cannot determine whether the drive is large
enough to hold the image.
Note: You should not take an image all of a dynamic disk because the method is
slow and the image file would be very large.
Hibernation and swap files
When Norton Ghost creates image files or clones, it does not include hibernation
and swap files. These files are valid only for one Windows session, and when they
are included in an image file, they make it significantly larger.
Norton Ghost implements file skipping differently for each type of file system.
■
■
FAT file systems: Files are not included on the image file or destination disk.
NTFS file systems: A file with the same name is created on the image file or
destination disk, but the contents of the file are not copied.
The following files are skipped on all file systems:
■
■
■
■
■
■
■
■
■
■
■
■
■
386Spart.par
Amizvsus.pmf
Dos data.sf
Ghost.dta
Hiberfil.sys
Hibrn8.dat
Hybern8
Navsysl.dat
Navsysr.dat
Pagefile.sys
Pm_hiber.bin
Save2dsk.bin
Saveto.dsk
Download from Www.Somanuals.com. All Manuals Search And Download.
70 Image file options
Hibernation and swap files
■
■
■
■
■
Spart.par
Swapper.dat
Toshiber.dat
Virtpart.dat
Win386.swp
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Chapter
Creating boot disks with
This chapter includes the following topics:
■
■
■
■
■
■
■
■
■
■
■
■
■
Introducing the Norton Ghost Boot Wizard
What is a Ghost boot disk
When to create a Ghost boot disk
How to use a Ghost boot disk
Files included on a Ghost boot disk
Creating a recovery boot disk
Opening the Ghost Boot Wizard
Creating boot disks and boot images
Selecting a template
Multicard templates and the boot disk
Adding network drivers to the Ghost Boot Wizard
Adding command-line parameters to a boot package
Providing MS-DOS
Download from Www.Somanuals.com. All Manuals Search And Download.
72 Creating boot disks with the Ghost Boot Wizard
Introducing the Norton Ghost Boot Wizard
Introducing the Norton Ghost Boot Wizard
The Ghost Boot Wizard creates Ghost boot disks that let you complete various
Ghost tasks when starting Norton Ghost from DOS. For any task, the Ghost Boot
Wizard guides you through the different steps to select the settings and drivers
that are needed to create the boot disk.
What is a Ghost boot disk
A Ghost boot disk can be created using the Ghost Boot Wizard, a utility supplied
with Norton Ghost. A boot disk is a floppy disk that loads DOS and driver files to
let you run Ghost.exe on your computer.
Depending upon the driver files included on your boot disk, more than one
floppy disk may be required to create a boot disk set.
When to create a Ghost boot disk
If you start and run Norton Ghost from Windows, then the only boot disk you
need is a recovery boot disk. If you are running Norton Ghost from Windows,
then the system files and drivers required to perform the backup, restore, or clone
are provided for you.
Note: If you saved your image file directly to CD or DVD, then you do not need a
recovery boot disk. Norton Ghost includes Ghost.exe if you save the image file to
CD or DVD.
To use Ghost.exe you must have a Ghost boot disk. The following tasks require a
boot disk:
■
■
Restoring your computer with Ghost.exe after software or hardware failure
Cloning a computer that does not have Windows installed
Once you have created the necessary boot disks, you can insert a boot disk into
your computer and restart your computer. This starts the computer in DOS and
starts Ghost.exe. You can then run Ghost.exe to back up, restore, and clone on
your computer from DOS.
See “Starting the Norton Ghost executable” on page 93.
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating boot disks with the Ghost Boot Wizard 73
Files included on a Ghost boot disk
Files included on a Ghost boot disk
A Ghost boot disk contains the files required to run Ghost.exe. This includes the
following:
■
Ghost.exe
The Norton Ghost for DOS executable.
■
DOS system files
PC-DOS is supplied for the purpose of creating Ghost boot disks. The DOS
files are installed automatically when you create the boot disk in Ghost Boot
Wizard.
■
Any files and drivers required to access the selected hardware
This includes CD-R/RW drivers, network protocol files, or network interface
card drivers.
Note: In previous versions of Norton Ghost, MSCDEX was required to read an
image from a CD. This is no longer necessary in Norton Ghost 2003.
When to include MS-DOS on a boot disk
By default, Norton Ghost includes PC-DOS on a Ghost boot disk. However,
some computer models may not start from a Ghost boot disk that contains PC-
DOS. If your computer does not start from a Ghost boot disk, create a new Ghost
boot disk from the Ghost Boot Wizard and include Windows 95/98 MS-DOS.
You must provide Windows 95/98 MS-DOS for the computer running the Ghost
Boot Wizard before you create an MS-DOS Ghost boot disk.
See “Providing MS-DOS” on page 89.
Creating a recovery boot disk
When you have created your first backup image, you must create a recovery boot
disk and ensure that you can start your computer and access the backup image
using the boot disk.
Note: If you saved your image file directly to CD or DVD, then you do not need a
recovery boot disk. Norton Ghost includes Ghost.exe if you save the image file to
CD or DVD.
Download from Www.Somanuals.com. All Manuals Search And Download.
74 Creating boot disks with the Ghost Boot Wizard
Opening the Ghost Boot Wizard
See Table 6-1 to determine which type of boot disk you should create as a disaster
recovery disk.
Once you have created a recovery boot disk, ensure that your computer starts
with the boot disk or the CD/DVD.
To test your recovery boot disk or CD/DVD
1
2
Turn off your computer.
Insert the boot disk or CD/DVD into the disk drive of your computer and
start your computer.
3
4
Ensure that Ghost.exe starts and that you can access your backup image file.
See “Restoring a hard disk from an image file” on page 101.
Remove the disk from the disk drive of your computer and restart your
computer.
Opening the Ghost Boot Wizard
The procedures in this chapter assume that you know how to open the Ghost
Boot Wizard.
To open the Ghost Boot Wizard
1
2
3
On the Windows taskbar, click Start > Programs > Norton Ghost.
In the Ghost Basic window, click Ghost Utilities.
In the Ghost Advanced window, click Norton Ghost Boot Wizard.
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating boot disks with the Ghost Boot Wizard 75
Creating boot disks and boot images
Creating boot disks and boot images
The processes for creating boot images and disks can include any of the following
features:
■
■
■
■
Support for CD-R/RW, DVD, LPT, USB, and FireWire
Network support for TCP/IP peer-to-peer connections
Support for reading an image from a CD-ROM
Support for mapping network drives
See Table 6-1 to decide which boot disk you should make.
Table 6-1 Boot disk types
Intended use of boot disk
Ghost Boot Wizard options to select
Local use of Norton Ghost:
You can use either of the following options:
■
■
■
Disk-to-disk clone
■
Standard Ghost Boot Disk
See “Standard boot disks” on page 76.
Partition-to-partition clone
■
Peer-to-Peer Network Boot Disk
See “Boot disks with network support”
on page 79.
Disk or partition backup to local
disk or partition
■
■
■
Disk or partition backup to local
JAZ or ZIP drive
Disk or partition restore from local
disk or partition
Disk or partition restore from local
JAZ or ZIP drive
■
■
to-peer connection between two
computers using LPT or USB cable.
See “Standard boot disks” on page 76.
IP peer-to-peer connection with
See “Boot disks with network support” on
network support between two
page 79.
computers
■
■
Back up a computer directly to an
image file on a CD-ROM on a CD
writer supported by Norton Ghost.
Standard Ghost Boot Disk
See “Standard boot disks” on page 76.
Restore a computer from an image
file on a CD-ROM on a CD-R/RW
drive supported by Norton Ghost.
See “Image files and CD/DVD
writers” on page 112.
Download from Www.Somanuals.com. All Manuals Search And Download.
76 Creating boot disks with the Ghost Boot Wizard
Creating boot disks and boot images
Table 6-1
Boot disk types
Intended use of boot disk
Ghost Boot Wizard options to select
■
■
Back up a computer directly to an
image file on a DVD on a DVD
writer supported by Norton Ghost.
Standard Ghost Boot Disk
Restore a computer from an image
file on a DVD on a DVD drive
supported by Norton Ghost.
■
Restore a computer from a Ghost
image file on a CD-ROM on a CD-
R/RW drive not supported by
Norton Ghost. The image file was
not stored on the CD-ROM using
Norton Ghost. Contains generic
CD-ROM drivers.
CD/DVD Startup Disk with Ghost
See “Boot disks with CD-ROM and DVD
support” on page 81.
■
■
file on a CD-ROM.
See “Boot disks with CD-ROM and DVD
support” on page 81.
Map a drive on a workstation to a
shared resource on a server and use
Norton Ghost to clone, back up, or
restore.
Drive Mapping Boot Disk
See “Boot disks with drive mapping network
support” on page 82.
Standard boot disks
the following:
■
■
Runs Ghost.exe for local operations.
Lets you write Ghost images directly to a CD-R/RW on a CD writer
supported by Norton Ghost.
See “Image files and CD/DVD writers” on page 112.
■
Lets you write Ghost images directly to a DVD on a DVD writer supported
by Norton Ghost.
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating boot disks with the Ghost Boot Wizard 77
Creating boot disks and boot images
■
Runs Ghost.exe on two computers connected by either an LPT or USB cable.
The default mode for an LPT connection is ECP/EPP High Speed. If you are
having problems with your LPT connection, set the mode to Bidirectional
8bit or Bidirectional 4bit. The next time that you create a boot disk, the
mode is reset to the default, ECP/EPP High Speed.
If you have multiple parallel ports and want to connect using a port other
than the default LPT1, use the LPT port option to specify the port into which
your cable is plugged.
■
Lets you use Ghost.exe to back up to or restore from an external device
connected by USB or FireWire.
To create a boot disk to run Ghost.exe, or with support for LPT, USB, or
FireWire cables
1
2
3
In the Ghost Boot Wizard window, click Standard Ghost Boot Disk.
Click Next.
Do one or more of the following:
■
■
Check USB support to add support for USB peer-to-peer to the boot
disk.
Click Advanced to set the USB peer-to-peer drivers.
See “Setting the USB peer-to-peer drivers” on page 79.
■
Check LPT support to add support for LPT peer-to-peer to the boot
disk.
■
■
■
Click Advanced to change the LPT mode or port.
Click No USB support to exclude support for USB external devices.
Click USB 1.1 support to add support for USB 1.1 external devices to the
boot disk.
If any of your USB cards/chipsets are USB 1.1, then you must select this
option.
■
■
Click USB 2.0 support to add support for USB 2.0 external devices to the
boot disk.
If any of your USB cards/chipsets are USB 1.1, then do not select this
option. Select the USB 1.1 support option.
Click Firewire Support to add support for FireWire external devices to
the boot disk.
Download from Www.Somanuals.com. All Manuals Search And Download.
78 Creating boot disks with the Ghost Boot Wizard
Creating boot disks and boot images
■
■
Click Assign DOS drive letters to assign a DOS drive letter to a USB or
FireWire external device.
Click Include Adaptec ASPI drivers to add Adaptec ASPI drivers to the
boot disk.
These drivers are required to write an image directly to a SCSI CD-R
that is supported by Norton Ghost.
4
5
Click Next.
Select one of the following:
■
Use PC-DOS: Includes PC-DOS on the boot disk.
■
Use MS-DOS: Includes MS-DOS on the boot disk.
See “Providing MS-DOS” on page 89.
6
7
Click Next.
or you want to use a different version of Norton Ghost.
The default path to the Norton Ghost executable appears in the Ghost.exe
field.
8
9
In the Parameters field, type any required command-line parameters.
See “Adding command-line parameters to a boot package” on page 88.
Click Next.
10 In the Floppy Disk Drive field, select the appropriate drive letter.
11 In the Number of disks to create field, select the number of disks that you
want to create.
12 Ensure that Format disk(s) first is checked to format the disks before disk
creation.
Ensure that this option is checked unless you are creating a custom boot disk
with custom system files. If this option is unchecked, the boot disk is not
bootable.
13 Ensure that Quick Format is checked to perform a quick format.
14 Click Next.
15 Review the boot disk details and click Next to start creating the boot disks.
Follow the prompts to format the disks and create a boot disk set.
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating boot disks with the Ghost Boot Wizard 79
Creating boot disks and boot images
Setting the USB peer-to-peer drivers
You can select USB peer-to-peer drivers to include on the boot disk. In most
cases, you do not need to alter the driver default. However, if you have problems
connecting using peer-to-peer, then select the other options and retry the task.
To select USB peer-to-peer drivers
1
Select one of the following:
■
■
■
All drivers: Includes all USB peer-to-peer drivers on the boot disk.
UHCI driver: Includes only UHCI drivers on the boot disk.
OHCI driver: Includes only OHCI drivers on the boot disk.
2
Click OK.
Boot disks with network support
The Ghost Boot Wizard helps you create boot disks that provide network support
for TCP/IP peer-to-peer connections. You can use these boot disks to clone,
restore, or back up using Norton Ghost on computers that are connected over a
TCP/IP peer-to-peer connection.
Before you start this process, you need to know the types of network cards that
are installed on your client computers. Unless you use the multicard template,
you must create a boot disk for each network card.
To create a boot disk with network support
1
2
3
In the Ghost Boot Wizard window, click Peer-to-Peer Network Boot Disk.
Click Next.
Select the network driver for the make and model of the network card
See “Selecting a template” on page 84.
If the correct driver is not in the list, add the driver.
See “Adding network drivers to the Ghost Boot Wizard” on page 86.
You can add more than one driver to the boot package.
See “Multicard templates and the boot disk” on page 85.
4
Click Next.
Download from Www.Somanuals.com. All Manuals Search And Download.
80 Creating boot disks with the Ghost Boot Wizard
Creating boot disks and boot images
5
Select one of the following:
■
Use PC-DOS: Includes PC-DOS on the boot disk.
■
Use MS-DOS: Includes MS-DOS on the boot disk.
See “Providing MS-DOS” on page 89.
6
7
or you want to use a different version of Ghost.
The default path to the Norton Ghost executable appears in the Ghost.exe
field.
In the Parameters field, type any required command-line parameters.
See “Adding command-line parameters to a boot package” on page 88.
8
9
Click Next.
Do one of the following:
■
■
Click DHCP will assign the IP settings if your network contains a
DHCP server.
Click The IP settings will be statically defined and complete the fields
below this option if your network does not contain a DHCP server.
If you create more than one boot disk, then the static IP address
incrementally increases as each boot disk is created.
10 Click Next.
11 In the Floppy Disk Drive field, select the appropriate drive letter.
12 In the Number of disks to create field, select the number of disks that you
want to create.
13 Ensure that Format disk(s) first is checked to format the disks before disk
creation.
Ensure that this option is checked unless you are creating a custom boot disk
with custom system files. If this option is unchecked, the boot disk is not
bootable.
14 Ensure that Quick Format is checked to perform a quick format.
15 Click Next.
16 Review the boot disk details and click Next to start creating the boot disks.
Follow the prompts to format the disks and create a boot disk set.
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating boot disks with the Ghost Boot Wizard 81
Creating boot disks and boot images
Boot disks with CD-ROM and DVD support
A boot disk with CD-ROM and DVD support lets you access images and other
files stored on CD-R/RW and DVD drives that are not supported by Norton
Ghost.
This kind of disk also contains the DOS system files and Norton Ghost.
To create a boot disk with CD-ROM and DVD support
1
2
3
In the Ghost Boot Wizard window, click CD/DVD Startup Disk with Ghost.
Click Next.
Select one of the following:
■
Use PC-DOS: Includes PC-DOS on the boot disk.
■
Use MS-DOS: Includes MS-DOS on the boot disk.
See “Providing MS-DOS” on page 89.
4
5
Click Next.
In the Ghost.exe field, type the correct path if the executable has been moved
or you want to use a different version of Ghost.
The default path to the Ghost executable appears in the Ghost.exe field.
6
In the Parameters field, type any required command-line parameters.
See “Adding command-line parameters to a boot package” on page 88.
7
8
9
Click Next.
In the Floppy Disk Drive field, select the appropriate drive letter.
In the Number of disks to create field, select the number of disks that you
want to create.
10 Ensure that Format disk(s) first is checked to format the disks before disk
creation.
Ensure that this option is checked unless you are creating a custom boot disk
with custom system files. If this option is unchecked, the boot disk is not
bootable.
11 Ensure that Quick Format is checked to perform a quick format.
12 Click Next.
13 Review the boot disk details and click Next to start creating the boot disks.
Follow the prompts to format the disks and create a boot disk set.
Download from Www.Somanuals.com. All Manuals Search And Download.
82 Creating boot disks with the Ghost Boot Wizard
Creating boot disks and boot images
Boot disks with drive mapping network support
When your computers need to access a network drive, use the Ghost Boot Wizard
to create boot disks that map a drive letter to a shared resource on a network
server. This lets you use the local option in Ghost.exe to access a network drive.
To create a boot disk that supports mapping network drives
1
2
3
In the Ghost Boot Wizard window, click Drive Mapping Boot Disk.
Click Next.
Select the network driver for the particular make and model of the network
card installed on the computer.
See “Selecting a template” on page 84.
If the correct driver is not in the list, add the driver.
See “Adding network drivers to the Ghost Boot Wizard” on page 86.
You can add more than one driver to the boot package.
See “Multicard templates and the boot disk” on page 85.
4
5
Click Next.
Select one of the following:
■
Use PC-DOS: Includes PC-DOS on the boot disk.
■
Use MS-DOS: Includes MS-DOS on the boot disk.
See “Providing MS-DOS” on page 89.
6
Click Get MS Client and browse to the MS-DOS Client files to include the
Microsoft Client files if you are using MS-DOS.
If you are using MS-DOS, you must include the Microsoft DOS Client files.
You must install the files on the Ghost Boot Wizard computer before you can
include them in the boot package.
See “Installing MS-DOS Client files” on page 49.
7
8
Click Next.
In the Computer Name field, type the name of the client computer.
This specifies the name of the computer after it starts from the floppy disk
and does not have to be the same name given to the computer in Windows. If
you create more than one disk, a number is added to the computer name so
that the names for subsequent disks are unique.
9
In the User Name field, type the user name that the boot disk will use to log
on to the network.
This user must exist on the network and have sufficient access rights to the
files and directories that you want to use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating boot disks with the Ghost Boot Wizard 83
Creating boot disks and boot images
10 In the Domain field, type the domain to which the user belongs.
11 In the Drive Letter field, select a drive letter to access a network share through
a mapped drive.
Select a drive letter greater than any existing drive letter.
12 If you want to prevent the boot package from mapping a drive when the
computer starts, click None.
In this case, map a drive from the DOS prompt after the computer has
started.
13 In the Maps To field, type the complete UNC path to the network share.
For example, to access a shared folder named Ghost on a computer named
Boss, the UNC path is \\Boss\Ghost.
14 Click Next.
15 Do one of the following:
■
Click DHCP will assign the IP settings if your network contains a
DHCP server.
■
Click The IP settings will be statically defined and complete the fields
below this option if your network does not contain a DHCP server. Your
network administrator can provide the values for these fields.
16 Click Next.
17 In the Floppy Disk Drive field, select the appropriate drive letter.
18 In the Number of disks to create field, select the number of disks that you
want to create.
19 Ensure that Format disk(s) first is checked to format the disks before disk
creation.
Ensure that this option is checked unless you are creating a custom boot disk
with custom system files. If this option is unchecked, the boot disk is not
bootable.
20 Ensure that Quick Format is checked to perform a quick format.
21 Click Next.
22 Review the boot disk details and click Next to start creating the boot disks.
Follow the prompts to format the disks and create a boot disk set.
Download from Www.Somanuals.com. All Manuals Search And Download.
84 Creating boot disks with the Ghost Boot Wizard
Selecting a template
Selecting a template
For the boot disk to work correctly, it is important that you select the correct
template. When you create a boot disk for client computers, the template that
you select must be suitable for the network cards installed in the computers that
are to start from the package.
To determine which network interface card is installed in a computer, find the
name of the driver from Network Properties within Windows. This must be done
on the client computer for which you are preparing the boot disk.
To determine which network interface card is installed
To determine which network interface card is installed on a Windows 98
computer
1
2
3
4
On the Windows taskbar, click Start > Settings > Control Panel.
Double-click System.
Click Device Manager.
Expand Network Adapter.
The make and model of the installed network interface card are listed.
To determine which network interface card is installed on a Windows NT 4
computer
1
2
On the Windows taskbar, click Start > Settings > Control Panel.
Double-click Network.
The make and model of the installed network interface card are listed on the
Adapters tab.
To determine which network interface card is installed on a Windows 2000
computer
1
2
3
4
On the Windows taskbar, click Start > Settings > Control Panel.
Double-click System.
On the Hardware tab, click Device Manager.
Expand Network adapters.
The make and model of the installed network interface card are listed.
The name of the network interface card as shown in Windows may not exactly
match the name of the correct template in the Ghost Boot Wizard.
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating boot disks with the Ghost Boot Wizard 85
Multicard templates and the boot disk
For example, Windows may list the card as 3Com Fast EtherLink XL 10/100Mb
TX Ethernet NIC (3C905B-TX). In this case the text in paraenthesis is the actual
model number of the card, which indicates that the Ghost Boot Wizard template
named 3COM 3C90X (which works for all 3C90- cards) is the correct template.
In some cases you may have a choice between an NDIS2 driver and a packet
driver version of the same template. Both templates should work, but you may
find that one gives better performance. Experiment to see which one works
better.
It is possible that there is no existing template in the Ghost Boot Wizard that is
suitable for the network interface card installed in your computer. In this case,
obtain the DOS drivers for the network interface card either from the disk
supplied with the card or from the manufacturer's Web site, and add a new
template to the Ghost Boot Wizard.
See “Adding network drivers to the Ghost Boot Wizard” on page 86.
If you have different network interface cards installed in client computers, then
you may be able to use the multicard template to create a single boot package that
works on each of your computers without modification.
Multicard templates and the boot disk
You can use multicard templates to create a boot disk package containing several
NDIS2 drivers. When the computer starts from the boot disk, a special multicard
driver checks the computer’s hardware to see if any of the NDIS2 drivers can be
used to access the installed network card.
Multicard templates are useful because several makes and models of network
cards are often used in a single LAN. You can create a single boot disk for use with
all of your computers without modification.
Refer to the Software License Agreement for use restrictions.
The Network Interface Card window is available when creating a Peer-to-Peer
Network Boot Disk or a Drive Mapping Boot Disk.
To create a multicard template
1
2
3
In the Network Interface Card window, click Multicard Template.
Click Next.
Select the required drivers from the list of NDIS2 drivers.
Select no more than four or five drivers, as space is limited on a floppy disk.
4
Click Next to continue creating the boot disk.
Download from Www.Somanuals.com. All Manuals Search And Download.
86 Creating boot disks with the Ghost Boot Wizard
Adding network drivers to the Ghost Boot Wizard
Adding network drivers to the Ghost Boot Wizard
The Ghost Boot Wizard includes drivers for over 130 network interface cards. If
your driver is not in the list, you can add it to the wizard so that it is set up the
next time that you need it.
The Network Interface Card window is available when creating a Peer-to-Peer
Network Boot Disk or a Drive Mapping Boot Disk.
To begin adding a network driver to the Ghost Boot Wizard
1
2
In the Network Interface Card window, click Add.
Select one of the following:
■
Packet Driver
NDIS2 Driver
■
Many manufacturers ship both drivers with their network cards so you
have a choice of which one to use.
3
Click OK to continue creating the boot disk.
Adding packet drivers to the Ghost Boot Wizard
Packet drivers are usually DOS executables (with .com or .exe file extensions) that
load from the Autoexec.bat file before Norton Ghost loads. Norton Ghost
communicates directly with the packet driver to use the services provided by the
network card.
To add a packet driver to the Ghost Boot Wizard
1
2
In the Template Properties window, on the Packet Driver tab, in the Driver
Executable field, click Browse to locate the packet driver so that the Ghost
Boot Wizard can copy the file to the current template.
Packet drivers are usually included on the driver disk supplied with the
network card. If you are installing the packet driver from the original disks
that came with your network interface card, the packet driver should be in a
directory called Packet or Pktdrv.
In the Parameters field, type the command-line parameters if the network
card requires them.
These parameters vary from driver to driver and are usually optional with
plug-and-play network cards. Consult the documentation that came with the
network card. This is often in the form of a Readme.txt file in the same
directory as the driver itself.
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating boot disks with the Ghost Boot Wizard 87
Adding network drivers to the Ghost Boot Wizard
3
Click Select Automatically to let Ghost determine the best multicasting
mode based on the information in the packet driver.
If the Select Automatically mode does not work, try Receive Mode 5. If that
does not work, try Receive Mode 6.
Adding NDIS2 drivers to the Ghost Boot Wizard
NDIS2 drivers work with the Microsoft Network Client. NDIS2 drivers are DOS
drivers that load from the DOS Config.sys file.
To add an NDIS2 driver to the Ghost Boot Wizard
1
2
In the Template Properties window, on the NDIS Driver tab, click Setup.
Locate the NDIS2 driver.
In many cases Ghost can automatically determine the other parameters for
your network.When locating the directory that contains the driver, look for a
folder named Ndis or Ndis2. If you have a choice between DOS and OS2
folders, select DOS.
3
Click OK.
If the setup fails to complete the driver properties, then complete the
following fields manually:
■
Filename: Type the DOS file name for the NDIS2 driver.
■
Driver Name: Type the internal name of the driver.
The internal name of the driver is used when generating the Protocol.ini
configuration file and must always end with a $ character. Read the
sample Protocol.ini file in the same directory as the driver itself to find
the driver name.
■
Parameters: Type the parameters for the Protocol.ini configuration file.
If you use Setup to automatically fill in this page, you will see the parameters
that you need to adjust. For the majority of plug-and-play cards, all of the
parameters are optional, so you can either accept the defaults or leave this
field empty.
4
Click OK.
When you have created the template that you require, you can continue creating
a boot disk.
Download from Www.Somanuals.com. All Manuals Search And Download.
88 Creating boot disks with the Ghost Boot Wizard
Adding command-line parameters to a boot package
Customizing the template
You may require additional drivers and programs in order to use the network
device attached to your computer. For example, many USB network devices must
load an extra driver for the USB port before the driver for the network device.
You can add files to the template and customize the Autoexec.bat and Config.sys
files of the resulting boot disk. Usually these are either DOS drivers or executable
programs, but you can add any type of file. Files added to the template appear in
the list to the right of the button.
If this template is used as a multicard template, then any additional files or
modifications are overridden by its settings.
The Template Properties window is available when creating a Peer-to-Peer Network
Boot Disk or a Drive Mapping Boot Disk.
To modify a template
1
2
3
In the Template Properties window, on the Advanced tab, click New.
Click Delete to delete the selected file from the list.
In the Autoexec.bat field, type any additional Autoexec.bat entries for the
driver.
The entries appear before any network-related commands, such as
Netbind.com or the packet driver executable.
4
In the Config.sys field, type any additional Config.sys entries for the driver.
The entries appear before any driver-related devices to ensure that the
enabling drivers load before the main network device drivers specified on the
network driver page.
Adding command-line parameters to a boot package
You can add command-line parameters to a boot package to instruct Norton
Ghost to perform certain actions.
See “Command-line switches” on page 153.
Command-line parameters can be added while creating a Standard Boot Disk, a
Peer-to-Peer Network Boot Disk, or a CD/DVD Startup Disk with Ghost boot
disk in the Ghost executable location window.
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating boot disks with the Ghost Boot Wizard 89
Providing MS-DOS
In the following example, the parameters instruct Norton Ghost to back up your
main disk to an image on another drive.
-clone,mode=create,src=1,dst=d:\backups\maindrv.gho
Table 6-2
Command parameters
Description
Clone Parameters
mode=create
Creates an image file
src=1
Specifies drive 1 as the source drive
Saves the image to the file D:\Backups\Maindrv.gho
dst=D:\Backups\Maindrv.gho
Providing MS-DOS
The Ghost Boot Wizard includes PC-DOS on boot disks. However, a boot disk
that includes PC-DOS might not start all computers. When you create a boot
disk, you can include MS-DOS instead of PC-DOS.
If you use MS-DOS, then you must provide MS-DOS files on the computer on
which you are creating the boot disk. Using an MS-DOS system disk that was
formatted on a Windows 95/98 computer, you can install the MS-DOS files
during the creation of the boot disk.
To install MS-DOS on your computer
To create an MS-DOS system disk on a Windows 95/98 computer
1
2
3
Insert a blank floppy disk into drive A of a Windows 95/98 computer.
Click Start > Program Files > Windows Explorer.
Right-click drive A.
Warning: Do not right-click drive C.
4
5
6
Click Format.
Check Copy System Files.
Click Start to format the disk.
You can install or uninstall MS-DOS while you are creating a boot disk.
Download from Www.Somanuals.com. All Manuals Search And Download.
90 Creating boot disks with the Ghost Boot Wizard
Providing MS-DOS
To install MS-DOS on your computer
1
Insert the formatted floppy disk into drive A of the computer on which the
Ghost Boot Wizard is running.
2
3
In the DOS Version window, click Get MS-DOS.
Click OK.
To uninstall MS-DOS from your computer
1
2
In the DOS Version window, click Remove MS-DOS.
Click OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Chapter
Backing up, restoring,
This chapter includes the following topics:
■
■
■
■
■
■
■
■
■
An overview of using Ghost.exe
Starting the Norton Ghost executable
Navigating without a mouse
Establishing a peer-to-peer connection with Ghost.exe
Creating a backup image file
Restoring from an image file
Cloning disks and partitions
Verifying image integrity
Adding switches to your Ghost operation
Download from Www.Somanuals.com. All Manuals Search And Download.
92 Backing up, restoring, and cloning from DOS
An overview of using Ghost.exe
An overview of using Ghost.exe
You can use the Norton Ghost executable, Ghost.exe, to clone a computer, create
a backup, and restore a computer. You can add switches to the cloning task in the
Options window or as parameters to Ghost.exe. Ghost.exe is run within DOS.
The following is an overview of the process of using Ghost.exe.
To use Norton Ghost
1
Start Ghost.exe.
Add command-line switches, if necessary.
See “Command-line switches” on page 153.
2
3
If you want to establish a peer-to-peer connection, then set up the
connection.
Select the Norton Ghost operation:
■
■
■
■
Disk or partition to image file
Disk or partition from image file
Disk to disk
Partition to partition
4
5
Do one of the following:
■
Select the source hard disk or partitions.
Select the image file.
■
Do one of the following:
■
Select the destination hard disk or partition.
Select the image file.
■
Make sure that you select the correct destination to overwrite. The
destination disk is completely overwritten with no chance of recovering any
data.
6
Complete the Ghost operation.
Note: On the Ghost.exe main menu, the option of GhostCast is not supported.
The GhostCast functionality is available only with Symantec Ghost Enterprise
Edition. If you require GhostCast functionality, see “Service and support
solutions” on page 209.
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up, restoring, and cloning from DOS 93
Starting the Norton Ghost executable
Starting the Norton Ghost executable
The Norton Ghost executable is a DOS-based application and runs in DOS mode
outside of Windows. If you run the Norton Ghost executable (Ghost.exe) within
Windows 95/98/Me, note the following:
■
Files may be in an open or changing state. If these files are cloned or backed
up, the resulting destination files are left in an inconsistent state.
■
■
■
■
The partition on which Windows is installed must not be overwritten.
If you overwrite a disk or partition, the computer must be restarted.
Ghost.exe does not automatically restart the system.
Hard disk sizes may appear smaller than their actual sizes. The Norton Ghost
executable can only access the shown destination size. The remaining space is
not used.
■
The Norton Ghost executable fails if you try to overwrite any of the
following:
■
■
■
Windows swap files
Registry files
Open files
You cannot run Ghost.exe within Windows NT, Windows 2000/XP, Linux, OS/2,
or other non-DOS operating systems. To run Ghost.exe on a computer that runs
a non-DOS operating system, start the computer in DOS using a Ghost boot disk.
Download from Www.Somanuals.com. All Manuals Search And Download.
94 Backing up, restoring, and cloning from DOS
Navigating without a mouse
To start the Norton Ghost executable
Do one of the following:
◆
■
Insert a Ghost boot disk into the floppy disk drive of your computer and
start your computer.
See “Creating boot disks and boot images” on page 75.
■
For Windows 98 computers, start your computer in DOS. At the DOS
prompt, type:
C:> \progra~1\symantec \Norton~1\ghost.exe
Running Norton Ghost in DOS may require additional DOS drivers to
some hardware, such as a CD-R/RW drive, then create a boot disk that
contains the drivers to access the hardware in DOS.
See “Creating boot disks and boot images” on page 75.
■
Use the Run Ghost Interactively Wizard.
See “Starting Ghost.exe” on page 59.
Marking your disks
The first time that you run Ghost.exe on your computer, the License agreement
warning dialog box appears. When you click OK, Norton Ghost marks all hard
disks to ensure that you do not see this message again.
To mark your disks
◆
In the License agreement warning dialog box, click OK to mark your hard
disks.
Navigating without a mouse
If you have mouse drivers loaded, then you can use the mouse to navigate in
Norton Ghost. You can also use the keyboard.
■
■
■
■
Use arrow keys to navigate the menu.
Press Tab to move from button to button.
Press Enter to activate the selected button.
Press Enter to select an item in a list.
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up, restoring, and cloning from DOS 95
Establishing a peer-to-peer connection with Ghost.exe
Establishing a peer-to-peer connection with
Ghost.exe
If you are using an LPT, USB, or TCP peer-to-peer connection, then you must set
up the connection between your computers before a clone, backup or restore
operation.
■
■
■
LPT: A parallel connection cable
USB: A USB 1.1 cable
TCP peer-to-peer: A network connection
See “TCP/IP connections” on page 178.
In a peer-to-peer operation, one computer is designated the master computer,
and the other is designated the slave computer. This table describes the possible
Norton Ghost processes and the master/slave relationships that exist between two
computers.
Table 7-1
Master and slave computers
Action
Master
Slave
Disk-to-disk clone
Computer containing source Computer containing
disk destination disk
Back up disk to image Computer containing source Computer receiving
file
disk
destination image file
Restore disk from
image file
Computer containing
destination disk
Computer containing source
image file
Partition-to-partition
clone
Computer containing source Computer containing
partition destination partition
Back up partition to
image file
Computer containing source Computer receiving
partition
destination image file
Restore partition from Computer containing
image file destination partition
Computer containing source
image file
Select which computer is the master (the computer from which you control the
connection), and which is the slave (the other computer participating in the
connection). All operator input must occur on the master computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
96 Backing up, restoring, and cloning from DOS
Establishing a peer-to-peer connection with Ghost.exe
You must have two Ghost boot disks with which to start your computers. Create
the boot disks using the Ghost Boot Wizard.
Note: Ensure that both boot disks are created with the same version of Norton
Ghost. You cannot use one boot disk created in Norton Ghost 2002 and one boot
disk created in Norton Ghost 2003 in the same task.
See “Creating boot disks and boot images” on page 75.
To connect two computers peer-to-peer
1
2
3
Insert a Ghost Boot Disk into the floppy disk drive of each computer.
Restart each computer.
On the slave computer, on the main menu, do one of the following:
■
■
■
Click Peer to peer > USB > Slave to start the computer as the slave
computer in a USB connection.
Click Peer to peer > LPT > Slave to start the computer as the slave
computer in an LPT connection.
Click Peer to peer > TCP/IP > Slave to start the computer as the slave
computer in a TCP/IP connection.
Take note of the IP address displayed in the Slave Connect dialog box.
4
On the master computer, on the main menu, do one of the following:
■
■
■
Click Peer to peer > USB > Master to start the computer as the master
computer in a USB connection.
Click Peer to peer > LPT > Master to start the computer as the master
computer in an LPT connection.
Click Peer to peer > TCP/IP > Master to start the computer as the
master computer in a TCP/IP connection and type the IP address
displayed on the slave computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up, restoring, and cloning from DOS 97
Creating a backup image file
Creating a backup image file
You can create a backup of either of the following:
A hard disk
A partition
The backup is saved as an image file, which you can store on one of the following:
■
■
■
■
■
■
A second hard disk
A second partition on your hard disk (partition backup only)
LS120 Superdisk, JAZ, or ZIP disk
CD-R/RW or DVD-R/RW
See “Saving an image file directly to a CD-R/RW or DVD-R/RW drive” on
page 113.
■
■
■
Tape
Locally mapped network file server
Another computer using peer-to-peer
Compression may affect the speed of operations. When you select a compression
level, Norton Ghost estimates the amount of space available for the destination
image file. If there is insufficient space, Norton Ghost prompts you to enable
spanning of image files.
Backing up a hard disk to an image file
When you back up a hard disk, a copy of the entire disk is saved as an image file.
Download from Www.Somanuals.com. All Manuals Search And Download.
98 Backing up, restoring, and cloning from DOS
Creating a backup image file
To back up a disk to an image file
1 On the Norton Ghost main menu, do one of the following:
■
Local: Click Local > Disk > To Image.
■
Peer-to-peer connection: Click Disk > To Image.
2
In the Source Drive dialog box, select the source disk.
The Source Drive dialog box shows details of every disk that Norton Ghost
finds on the local computer.
3
4
In the File Locator dialog box, type the image file destination and name.
In the Image file description dialog box, type a description of the image file.
You can modify this description in Ghost Explorer when the image file has
been created.
5
6
Click Save.
In the Compress Image? dialog box, do one of the following:
■
■
■
Click No for no compression (high speed).
Click Fast for low compression (medium speed).
Click High for high compression (slower speed).
See “Image files and compression” on page 62.
7
When the “Proceed with Image File Creation?” question appears, check the
details and ensure that the correct options are selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up, restoring, and cloning from DOS 99
Creating a backup image file
8
9
Do one of the following:
Click Yes to proceed with the image file creation.
■
The system performs an integrity check of the file structure on the
source disk and then copies the source disk to the destination image file.
leaves the destination image file in an unknown state.
■
Click No to return to the menu.
If spanning is enabled and required, click Yes and type the location of the
next span of the image file.
See “Image files and volume spanning” on page 63.
Note: If the image file reaches the size of 2 GB and there is not enough space to
continue, you are prompted to insert the next media to continue.
Verify the integrity of the image file when it has been created.
See “Verifying image integrity” on page 107.
Backing up a partition to an image file
You can create an image file from one or more partitions to use as a backup or to
clone onto another partition or disk.
To back up a partition to an image file
1
On the main menu, do one of the following:
■
Local: Click Local > Partition > To Image.
■
Peer-to-peer connection: Click Partition > To Image.
2
3
In the Source Drive dialog box, select the source drive.
The Source Drive dialog box contains the details of every disk that Norton
Ghost finds on the local computer.
In the Source Partition dialog box, select the source partitions to include in
the destination image file.
The Source Partition dialog box contains the details of all the partitions on
the selected source disk. Multiple partitions may be selected.
4
5
Click OK.
In the File Locator dialog box, select the image file destination and name.
Download from Www.Somanuals.com. All Manuals Search And Download.
100 Backing up, restoring, and cloning from DOS
Creating a backup image file
6
In the Image file description dialog box, type a description of the image file.
You can modify this description in Ghost Explorer when the image file has
been created.
7
8
Click Save.
In the Compress Image? dialog box, do one of the following:
■
■
■
Click No for no compression (high speed).
Click Fast for low compression (medium speed).
Click High for high compression (slower speed).
See “Image files and compression” on page 62.
9
In the Proceed with partition image creation? dialog box, ensure that the
correct options are selected.
10 Do one of the following:
Click Yes to proceed with the image file creation.
■
The system performs a quick integrity check of the file structure on the
source partitions and then copies the source partitions to the destination
that this leaves the destination image file in an unknown state.
■
Click No to return to the menu.
11 If spanning is enabled and required, click Yes and type the location of the
next span of the image file.
See “Image files and volume spanning” on page 63.
Note: If the image file reaches the size of 2 GB and there is not enough space to
continue, you are prompted to insert the next media to continue.
Verify the integrity of the image file when it has been created.
See “Verifying image integrity” on page 107.
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up, restoring, and cloning from DOS 101
Restoring from an image file
Restoring from an image file
You can restore either of the following:
■
■
A hard disk
A partition
The restore is made from a previously created image file that has been stored on
one of the following:
■
■
■
■
■
■
■
■
A second hard disk
A second partition on your hard disk
JAZ or ZIP disk
CD-R/RW
DVD
Tape
Mapped network drive
Drive on another computer (peer-to-peer)
Restoring a hard disk from an image file
When you restore a hard disk, it is overwritten by the contents of the image file.
To restore a disk from an image file
1
2
On the main menu, do one of the following:
■
Local: Click Local > Disk > From Image.
■
Peer-to-peer connection: Click Disk > From Image.
In the File Locator dialog box, do one of the following:
■
Type the path and file name of the image file.
■
Click Browse to locate the image file.
Specify the drive or device and select the full path name. The image file
may reside on a local drive or on a locally mapped network file server.
When using peer-to-peer connections, the image file is located on the
slave computer.
3
Press Enter.
Download from Www.Somanuals.com. All Manuals Search And Download.
102 Backing up, restoring, and cloning from DOS
Restoring from an image file
4
5
In the Destination Drive dialog box, select the destination disk.
Choose carefully as this is the disk that will be overwritten.
The Destination Drive dialog box shows the details of every drive that
Norton Ghost finds on the local computer. If the source image file resides on
a local disk, then this disk is not available for selection.
In the Destination Drive Details dialog box, confirm or change the
destination disk partition layout.
The Destination Drive Details dialog box shows a suggested partition layout
for the destination disk. By default, Norton Ghost tries to maintain the same
size ratio between the new disk partitions. However, you should note the
following:
■
You can change the size of any target FAT, NTFS, or Linux Ext2/3
partition by entering the new size in megabytes.
■
You cannot enter a value that exceeds the available space, is beyond the
file system’s limitations, or is not large enough to contain the data held
in the source image.
6
7
Click OK.
Do one of the following:
■
Click Yes to proceed with the disk cloning.
Norton Ghost creates the destination disk using the source image file
disk details. If you need to abort the process, press Ctrl+C, but be aware
that this leaves the destination disk in an unknown state.
Warning: Only click Yes if you are sure that you want to proceed. The
destination disk is completely overwritten with no chance of recovering any
data.
■
Click No to return to the menu.
8
9
If spanning is enabled, do one of the following:
■
■
Click OK to continue on the same form of media.
Click Filename to restore from a different location, and then type the
location and file name of the image file span.
Insert the next media, if prompted.
Restart the computer when the disk image restore is complete.
Run Symantec Disk Doctor, ScanDisk, or a similar utility to verify the integrity of
the destination disk.
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up, restoring, and cloning from DOS 103
Restoring from an image file
Restoring a partition from an image file
When you restore a partition, it is overwritten by the data from an image file.
To restore a partition from an image file
1
2
On the main menu, do one of the following:
■
Local: Click Local > Partition > From Image.
■
Peer-to-peer connection: Click Partition > From Image.
In the File Locator dialog box, do one of the following:
■
Type the path and file name of the image file.
■
Click Browse to locate the image file.
Specify the drive or device and select the full path name. The image file
may reside on a local drive or on a locally mapped network file server.
When using peer-to-peer connections, the image file is located on the
slave computer.
3
4
Press Enter.
In the Source Partition dialog box, select the source partition from the image
file.
The Source Partition dialog box contains the details of all of the partitions in
the image file.
5
6
In the Destination Drive dialog box, select the destination disk.
The Destination Drive dialog box contains the details of every disk that
Norton Ghost finds on the local computer.
In the Destination Partition dialog box, select the destination partition.
Select an existing partition carefully as this is the partition that will be
overwritten.
The Destination Partition dialog box contains the details of all of the
partitions on the selected destination disk. If this is a local partition-to-
partition copy, then the source partition is unavailable for selection.
However, you can create a new partition if space is available. If you create a
new partition, it can be resized during the cloning operation.
7
In the Proceed with partition restore? dialog box, ensure that the correct
options are selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
104 Backing up, restoring, and cloning from DOS
Cloning disks and partitions
8
Do one of the following:
■
Click Yes to proceed with the partition cloning.
Norton Ghost overwrites the destination partition using the partition
details contained in the image file. If you need to abort the process, press
Ctrl+C, but be aware that this leaves the destination partition in an
unknown state.
Warning: Only click Yes if you are sure that you want to proceed. The
destination partition is completely overwritten with no chance of recovering
any data.
■
Click No to return to the menu.
9
If spanning is enabled, do one of the following:
■
■
Click OK to continue on the same form of media.
Click Filename to restore from a different location, and then type the
location and file name of the image file span.
Insert the next media if prompted.
10 Restart the destination computer when the partition copy is complete.
Run Symantec Disk Doctor, ScanDisk, or a similar utility to verify the integrity of
the destination partition.
Cloning disks and partitions
By default, Norton Ghost tries to maintain the same size ratio between the new
disk partitions. However, you should note the following:
■
You can change the size of any destination FAT, NTFS, or Linux Ext2/3
partition by entering the new size in megabytes.
■
You cannot enter a value that exceeds the available space, is beyond the file
system’s limitations, or that is not large enough to contain the data held in
the source partition.
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up, restoring, and cloning from DOS 105
Cloning disks and partitions
Cloning disk to disk
When you clone disk to disk, Norton Ghost copies the contents of one hard disk
onto another.
To clone disk to disk
1
On the Norton Ghost main menu, do one of the following:
■
Local: Click Local > Disk > To Disk.
■
Peer-to-peer connection: Click Disk > To Disk.
2
3
In the Source Drive dialog box, select the source disk.
The Source Drive dialog box shows the details of every disk that Norton
Ghost finds on the local computer.
In the Destination Drive dialog box, select the destination disk.
Choose carefully as this is the disk that will be overwritten.
If a peer-to-peer connection method is used, the destination disk can be any
of the slave computer’s disks. However, if this is a local disk-to-disk copy,
then the source disk is unavailable for selection.
4
Confirm the destination disk layout.
Warning: The Destination Drive Details dialog box shows a suggested
partition layout for the destination drive once the cloning process has been
completed. This partition layout may mirror the source drive layout.
Therefore, the destination drive details appear similar to the source drive.
5
6
Click OK.
When the “Proceed with disk clone?” question appears, check the details and
ensure that the correct options are selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
106 Backing up, restoring, and cloning from DOS
Cloning disks and partitions
7
Do one of the following:
■
Click Yes to proceed with the disk cloning.
The system performs an integrity check of the file structure on the
source disk, and then copies the source disk to the destination. If you
need to abort the process press, Ctrl+C, but be aware that this leaves the
destination disk in an unknown state.
Warning: Only click Yes if you are sure that you want to proceed. The
destination disk is overwritten with no chance of recovering any data.
■
Click No to return to the menu.
8
Restart the computer.
Warning: You should remove one of the hard disks before you restart your
computer. If you leave two hard disks in the computer, damage can occur to
both of the bootable operating systems.
Run Symantec Disk Doctor, ScanDisk, or a similar utility to verify the integrity of
the destination disk.
Cloning partition to partition
When you clone partition to partition, Norton Ghost copies the contents of one
partition onto another.
To clone from partition to partition
1
On the main menu, do one of the following:
■
Local: Click Local > Partition > To Partition.
■
Peer-to-peer connection: Click Partition > To Partition.
2
3
4
In the Source Drive dialog box, select the source disk.
The Source Drive dialog box shows details of every disk that Norton Ghost
finds on the local computer.
In the Source Partition dialog box, select the source partition.
The Source Partition dialog box shows the details of all of the partitions on
the selected source disk.
In the Destination Drive dialog box, select the destination disk.
The Destination Drive dialog box shows the details of every disk that Norton
Ghost finds on the destination computer. For peer-to-peer connections, the
slave computer is the destination.
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up, restoring, and cloning from DOS 107
Verifying image integrity
5
In the Destination Partition dialog box, select the destination partition.
Select an existing partition carefully as this is the partition that is
overwritten.
The Destination Partition dialog box shows the details of all of the partitions
on the selected destination disk. If this is a local partition-to-partition copy,
then the source partition is unavailable for selection. However, you can create
a new partition if space is available. If you create a new partition, it can be
resized during the cloning operation.
6
7
Click OK.
When the final “Proceed with Partition Copy?” question appears, ensure that
the correct options are selected.
This is the last chance to back out.
Do one of the following:
■
Click Yes to proceed with the partition copy.
If you need to abort the process, press Ctrl+C, but be aware that this
leaves the destination disk in an unknown state.
Warning: Only click Yes if you are sure that you want to proceed. The
destination partition is completely overwritten with no chance of recovering
any data.
■
Click No to return to the menu.
8
Restart the destination computer when the partition copy is complete.
Run Symantec Disk Doctor, ScanDisk, or a similar utility to verify the integrity of
the destination partition.
Verifying image integrity
After a backup, restore, or clone, run a check to verify the integrity of the
partition, hard disk, or computer.
To verify an image file or disk
To verify the integrity of an image file
◆
On the computer on which the image file is saved, on the main menu, do one
of the following:
■
Local: Click Local > Check > Image File.
■
Peer-to-peer connection: Click Check > Image File.
Download from Www.Somanuals.com. All Manuals Search And Download.
108 Backing up, restoring, and cloning from DOS
Adding switches to your Ghost operation
To verify the integrity of a disk
1
On the main menu, do one of the following:
■
Local: Click Local > Check > Disk.
■
Peer-to-peer connection: Click Check > Disk.
2
3
4
Select the source disk to verify.
Click OK.
Click Yes to continue with the disk check.
Adding switches to your Ghost operation
You can include a number of options (or switches) that can also be entered using
the command-line. These switches are set in the Ghost.exe user interface.
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up, restoring, and cloning from DOS 109
Adding switches to your Ghost operation
To add switches to your Ghost operation
1
2
On the main menu, click Options.
On the following tabs, select the options to include in your current cloning
task:
Table 7-2
Optional switches
Command-line options
Tab
Span/CRC
FAT 32/64
Misc
-span, -auto, -cns, -crcignore, -fcr
-f32,-f64, -fatlimit
-sure, -fro, -rb, -fx
Image/Tape
-ia, -ib, -id
-tapebuffered, -tapeeject, -tapesafe, -tapeunbuffered
HDD access
Security
-ffx, -fnx, -ffi, -fni, -ffs, -fns
-pwd, -locktype=type
See “Command-line switches” on page 153.
3
4
On the Save Settings tab, click Save Settings to confirm the list of active
switches listed.
Click Accept to include the settings in the current task.
Download from Www.Somanuals.com. All Manuals Search And Download.
110 Backing up, restoring, and cloning from DOS
Adding switches to your Ghost operation
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Chapter
Backing up and restoring
with CD-R/RW and DVD-
R/RW
This chapter includes the following topics:
■
■
■
Image files and CD/DVD writers
Saving an image file directly to a CD-R/RW or DVD-R/RW drive
Saving an image file to an unsupported CD-R/RW or DVD-R/RW drive
Download from Www.Somanuals.com. All Manuals Search And Download.
112 Backing up and restoring with CD-R/RW and DVD-R/RW
Image files and CD/DVD writers
Image files and CD/DVD writers
Norton Ghost support of SCSI and IDE CD and DVD writers allows the storage
of a single image file onto one or more CD-R/RW or DVD-R/RW. Norton Ghost
supports many CD and DVD drives. If you have problems writing to CD-R/RW
or DVD-R/RW, then check that your drive is listed on the support Web site,
http://service1.symantec.com/SUPPORT/ghost.nsf/docid/2002030414141625
If you run Norton Ghost from a Windows wizard, it searches for a CD/DVD
writer with media inserted and automatically selects this writer.
When you use CD/DVD writers with Ghost.exe, you can select a writer as the
destination device in the File Locator window. Each writer is shown as CD-Rx,
where x is a number starting at one and increasing incrementally for each writer
present. For example, the following screen shows a CD writer available for use.
For Norton Ghost to access SCSI CD/DVD writers, a DOS ASPI driver must be
installed prior to use. The Backup and Clone Wizards attempt to detect and
install the driver automatically, but you may have to select the drivers in the
Advanced Settings. When creating a Ghost boot disk from the Ghost Boot
Wizard, you must include the Adaptec ASPI drivers.
See “Standard boot disks” on page 76.
Norton Ghost should work with most SCSI and IDE writers produced in 2000 or
later. It may or may not work with older models. Use the latest firmware available
for your CD/DVD writer. An IDE CD/DVD writer performs best if it is mounted
on the secondary IDE controller.
A list of CD/DVD writers with which Norton Ghost has been tested is available
on the Symantec Service and Support Web site:
http://service1.symantec.com/SUPPORT/ghost.nsf/docid/2002030414141625
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up and restoring with CD-R/RW and DVD-R/RW 113
Saving an image file directly to a CD-R/RW or DVD-R/RW drive
If your CD/DVD device is not listed on the Web site, use the Integrity Check
Wizard to ensure that your image can be restored. The Integrity Check Wizard
performs a dummy restore and confirms that your CD/DVD drive is compatible
with Norton Ghost.
Table 8-1 lists the media that you should use with CD and DVD writers and the
action that Norton Ghost takes.
Table 8-1
CD and DVD media
Type of drive
CD-R
Media
Blank
CD-RW
Prompts to erase existing data before writing new data
DVD-R
Blank
DVD-RW
DVD+R
Prompts to erase existing data before writing new data
Blank
DVD+RW
Prompts to overwrite existing data
When you create an image on CD/DVD, you can make the CD/DVD bootable.
The Backup Wizard does this automatically, but when you create an image from
Ghost.exe, then you need an appropriate boot disk created with the Ghost Boot
Wizard to make the CD/DVD bootable.
See “Standard boot disks” on page 76.
Saving an image file directly to a CD-R/RW or DVD-
R/RW drive
You can save an image file directly to a CD or DVD. You can also make the CD/
DVD bootable.
following:
■
■
The CD/DVD drive must be compatible with Norton Ghost.
Norton Ghost automatically spans CD-R/RW disks if necessary. You do not
need to use a spanning switch on the command line.
See “Image files and volume spanning” on page 63.
■
If the CD-RW/DVD-RW contains existing data, Norton Ghost prompts you
to confirm that you want the data erased.
Download from Www.Somanuals.com. All Manuals Search And Download.
Saving an image file to an unsupported CD-R/RW or DVD-R/RW drive
If Norton Ghost does not support your CD-R/RW drive and the image file is too
large to fit on one CD, you can still save the image file to CD.
See “Saving an image file to an unsupported CD-R/RW or DVD-R/RW drive” on
page 114.
Saving an image file to an unsupported CD-R/RW or
DVD-R/RW drive
Not all CD-R/RW/DVD drives are supported by Norton Ghost. If your drive is
unsupported, you can create an image file and then write it to CD/DVD using
third-party software.
If your drive is unsupported, and the image file is too large to fit onto one disk,
you can still save the image file to CD/DVD.
There are two methods of saving an image file to an unsupported CD-R/RW/
DVD drive:
■
■
Splitting the image file while creating it
Splitting the image file after it has been created
The image file is initially saved to another partition or hard disk and then copied
to a CD-R/RW/DVD disk using your CD/DVD recording software.
To save an image file onto a CD, you must split the image file into files that fit on
a CD-ROM. Split the image into files that are not larger than 620 MB. This leaves
the capacity of the CD.
Note: Some CD/DVD writers let you write directly to the CD-RW/DVD as if to a
drive letter. This is not supported by Norton Ghost.
See “Using third-party software to write to the CD-R/RW disc” on page 200.
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up and restoring with CD-R/RW and DVD-R/RW 115
Saving an image file to an unsupported CD-R/RW or DVD-R/RW drive
Splitting an image file during a backup
To split an image file as it is created, run Norton Ghost from the command line in
DOS, using the -split and -autoname switches.
To split an image file as it is created
1
Start Ghost.exe using the -split and -auto switches.
For example:
a:\ghost.exe -split=600 -auto
See “Starting the Norton Ghost executable” on page 93.
2
Create and save the image file.
See “Creating a backup image file” on page 97.
The -split command in this example limits the image size to a maximum of 600
megabytes for any one segment. The -auto switch names each of the segments
numerically.
See “Command-line switches” on page 153.
Download from Www.Somanuals.com. All Manuals Search And Download.
116 Backing up and restoring with CD-R/RW and DVD-R/RW
Saving an image file to an unsupported CD-R/RW or DVD-R/RW drive
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Chapter
Using Ghost Explorer to
modify image file
contents
This chapter includes the following topics:
■
■
■
■
■
■
■
■
■
■
■
Understanding Ghost Explorer
Viewing image files
Launching a file
Extracting a file or directory from an image file
Modifying image files in Ghost Explorer
Listing the contents of an image file
Setting span file sizes
Splitting an image file
Compiling a file
Determining Norton Ghost image file version
Using Ghost Explorer from the command line
Download from Www.Somanuals.com. All Manuals Search And Download.
118 Using Ghost Explorer to modify image file contents
Understanding Ghost Explorer
Understanding Ghost Explorer
The Ghost Explorer utility lets you view, alter, add, and extract files from an
image file. This means that you can add extra files to the image file, move the files
within the image file, and extract files from the image file to copy onto client
computers.
Note: If an image file has been created from an NTFS partition, you can view and
extract files from the image file. You cannot add files to or delete files from the
image file.
Ghost Explorer lets you quickly and easily extract files or directories from an
image file. Using Ghost Explorer, you can do the following:
■
■
■
■
View image file contents and save a list of files within an image file.
Extract files or directories from an image file.
Add, move, copy, delete, and launch files from and within an image file.
Use drag-and-drop or cut-and-paste functionality to add files and directories
from Windows Explorer to the image file.
■
■
Set span sizes.
Add a description to an image file.
Note: Right-click a file or directory in Ghost Explorer to access a list of file
commands.
Ghost Explorer supports the following partition types:
■
■
■
■
■
FAT12
FAT16
FAT32
NTFS (read only)
Linux Ext2/3
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Ghost Explorer to modify image file contents 119
Viewing image files
To open Ghost Explorer
1
On the Windows taskbar, click Start > Programs > Norton Ghost 2003 >
Norton Ghost.
2
3
Click Ghost Utilities.
Click Norton Ghost Explorer.
Viewing image files
You can view the contents of an image file, including details of the partitions,
directories, and files.
To view an image file
1
Open Ghost Explorer.
See “To open Ghost Explorer” on page 119.
2
3
4
5
On the File menu, click Open.
Select an image file.
Click Open.
On the File menu, click Properties to view the image file properties.
Launching a file
This command is available only when you select a file in the right pane.
Ghost Explorer restores a file to a temporary directory and attempts to open it. If
the file is an executable program, it is run. If it is a data file and there is an
Download from Www.Somanuals.com. All Manuals Search And Download.
120 Using Ghost Explorer to modify image file contents
Extracting a file or directory from an image file
application installed and associated with this file type, the application opens with
the data file.
If you try to launch an application that depends on other files within the image
file, it will probably fail. Ghost Explorer does not determine what dependencies
exist. Extract the required files and then run the application file.
To launch a file
1
2
In Ghost Explorer, in the right pane, select a file.
On the File menu, click Launch.
Extracting a file or directory from an image file
You can extract a file or directory directly from an image file using Ghost
Explorer. This does not delete the original file, but copies it to a new location.
To extract a file or directory from an image file
1
2
3
4
5
In Ghost Explorer, open the image file.
Select the file or directory to be extracted.
On the File menu, click Extract.
Select the location to which you want to extract the file or directory.
Click Extract to save the file or directory to the chosen location.
Note: You can also drag and drop a file from Ghost Explorer to Windows
Explorer to extract it.
Modifying image files in Ghost Explorer
You can use Ghost Explorer to add files or directories from Windows Explorer to
any image file that was created in Norton Ghost version 6.0 or later and is not
NTFS. You can also delete files from any image file that was created in Norton
Ghost 5.1d or later and is not NTFS. You can check the version of Norton Ghost
used to create your image file in Ghost Explorer.
See “Determining Norton Ghost image file version” on page 123.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Ghost Explorer to modify image file contents 121
Listing the contents of an image file
Adding, moving, and deleting files
Within image files, Ghost Explorer supports Windows cut-and-paste operations,
including copying, pasting, moving, deleting, and adding files to images. You can
also drag and drop from Windows Explorer to Ghost Explorer.
Listing the contents of an image file
You can create a text file that contains a list of the directories (and, optionally,
files and their details) that are in the current image file. You can store this file
with the image file to keep an easily accessible list of the image file contents.
To list the contents of an image file
1
2
3
In Ghost Explorer, open the image file.
On the File menu, click List Contents.
Do one of the following:
■
■
■
Click Directories only to include directories only.
Click Include Files to include files.
Click Include Details to include file details.
4
5
6
Select a directory to which to save the text file.
Type a file name.
Click Save.
Setting span file sizes
Norton Ghost lets you split an image file into smaller files called spans. The Span
Split Point function in Ghost Explorer lets you set the size of each span so that
when you add files or directories, each span file does not get bigger than the
specified size.
To set a span file size
1
2
3
On the View menu, click Options.
In the Span Split Point (MB) field, type the required size.
Click Autoname Spans if you want Ghost Explorer to choose a default name
for additional span files that it creates.
Download from Www.Somanuals.com. All Manuals Search And Download.
122 Using Ghost Explorer to modify image file contents
Splitting an image file
You can split an existing image file into smaller spans. This function is useful if,
for example, you need to split a file into two or more files that can then be saved
onto a CD/DVD drive that is unsupported by Norton Ghost. Once this option is
See “Spanned image files” on page 64.
Note: If the CD-R/RW drive is supported by Norton Ghost, then you can save an
image file directly to CD as it is created.
See “Creating a backup image file” on page 36.
To split an existing image file
1
2
In Ghost Explorer, open the image file.
Select one of the following:
■
The image file
■
A single partition
3
4
On the File menu, click Options.
In the Span Split Point (MB) field, type the required size.
If you are splitting the file to save onto CD, then set the size to 600 MB.
5
Click Autoname Spans if you want Ghost Explorer to choose a default name
for additional span files that it creates.
6
7
Click OK.
Type a name and location for the first new file.
All the new files created are saved in the same location. Use a different name
from the original image file to avoid confusion.
8
9
Click OK to start the regeneration.
Click OK each time that you are prompted to create a new span segment.
Compiling a file
If you add or delete files from within an image file, the image file becomes
fragmented. Norton Ghost takes longer to restore a fragmented image than a
compiled file. Compiling a file defragments it, which improves performance
during the restore.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Ghost Explorer to modify image file contents 123
Determining Norton Ghost image file version
Check the properties of the image file to see whether compilation is
recommended.
To compile a file
1
2
3
On the File menu, click Compile if compilation is recommended.
Type a new name for the compiled file.
Click Save.
Determining Norton Ghost image file version
Whether you can add, delete, or view an image file, or move files within an image
file depends on the version of Norton Ghost that was used to create the image file.
Ghost Explorer cannot open a file created with a version of Norton Ghost earlier
than 3.0. If the image file was created in Norton Ghost 3.0 or later, you can
determine the version by looking at the file’s properties in Ghost Explorer.
To determine the version of Norton Ghost used to create an image file
1
2
In Ghost Explorer, open the image file.
On the File menu, click Properties.
The Properties window appears. The version of Norton Ghost used to create
the image file appears next to Produced by Ghost version.
Using Ghost Explorer from the command line
You can start Ghost Explorer from an command prompt by typing its path and
file name.
To start Ghost Explorer from a command prompt
1
On the Windows taskbar, click Start > Programs > Accessories > Command
Prompt.
2
3
Type Ghostexp.
Press Enter.
You can also provide a Ghost image file as an argument for Ghost Explorer to
open. For example:
Ghostexp n:\Images\Myimage.gho
Download from Www.Somanuals.com. All Manuals Search And Download.
124 Using Ghost Explorer to modify image file contents
Using Ghost Explorer from the command line
If Ghost Explorer reports a corruption in your image file, you may be able to get
further details of the nature of the corruption. Normally, you would only use
these options when asked to do so by Ghost Explorer Technical Support.
Table 9-1 lists the arguments with which you can start the program.
Table 9-1
Ghost Explorer arguments
-d1
-d2
-d4
Reports on corruptions or significant events in FAT file systems
Reports on corruptions or significant events in NTFS file systems
Reports on corruptions or significant events in Ext2/3 files
The reports are presented to you as dialog boxes. You can use all switches or use
-d7 to turn on all options.
Ghost Explorer has a batch mode in which it carries out a single command and
then exits. In this version, batch mode supports the saving of the contents to a
text file only. To use this mode, specify one of the switches in Table 9-2.
Table 9-2
Batch mode switches
-t
Saves the list of directories in the dump file to a file with the same
name as the image file but with an extension of .txt
-tf
Saves a list of directories and files
-tv
Saves a verbose listing of directories and files
Saves the list to the file specified
-t[vf]=filename
If Ghost Explorer reports that a spanned or split image is corrupt without
prompting for the second part of the image, it may not recognize that the image is
split. Starting with the -split argument forces Ghost Explorer to treat an image as
a split image.
See “Setting span file sizes” on page 121.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Ghost Explorer to modify image file contents 125
Using Ghost Explorer from the command line
Using Ghost Explorer with long file names
The image index created by versions of Norton Ghost prior to 5.1c did not handle
long file names containing double-byte characters correctly, such as file names in
Asian or Eastern European languages. Ghost Explorer may be able to show these
names properly by reading them directly from the image file instead of from the
index. However, the restoring of the image is much slower. Use the switch
-ignoreindex to force this behavior. You must have the correct char set loaded.
To set the correct char set
1
2
3
On the Windows taskbar, click Start > Settings > Control Panel.
Double-click Regional Options.
Select the required language option, and then click OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
126 Using Ghost Explorer to modify image file contents
Using Ghost Explorer from the command line
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Chapter
Managing partitions using
GDisk
This chapter includes the following topics:
■
■
■
■
■
■
■
■
■
■
■
■
■
Introducing GDisk
Running GDisk
Overview of main command-line switches
Creating a partition
Reinitializing the Master Boot Record
Showing information about disks
Performing multiple GDisk operations using batch mode
FAT16 partitions in Windows NT
Deleting and wiping your disk
Activating or deactivating a partition
Hiding or unhiding a partition
Modifying the Windows NT/2000/XP boot menu
Support for Large Hard Disks
Download from Www.Somanuals.com. All Manuals Search And Download.
128 Managing partitions using GDisk
Introducing GDisk
Introducing GDisk
GDisk lets you create partitions, reinitialize Master Boot Records, delete data, and
wipe your disks in many different ways.
Two versions of GDisk are supplied with Norton Ghost:
■
■
GDisk: Runs in DOS
GDisk32: Runs from the command line in a Windows operating system
Not all GDisk command-line switches can be run with GDisk32.
GDisk is a complete replacement for the Fdisk and Format utilities that offers the
following features:
■
■
■
■
On-the-fly formatting
Extensive partition reporting
High-security disk wiping
The ability to hide a partition or make a hidden partition visible
Unlike Fdisk, which uses interactive menus and prompts, GDisk is command-
line driven. This offers quicker configuration of a disk's partitions and the ability
to define GDisk operations in a batch file.
Running GDisk
Run either GDisk in DOS or GDisk32 in Windows.
To run GDisk
1
2
Start your computer in DOS mode.
At the DOS prompt, type GDisk followed by the required disk and switches.
Note: The default path for GDisk is progra~1\symantec\Norton~1\GDisk.
To run GDisk32
1
2
On the Windows taskbar, open a DOS window.
At the DOS prompt, type GDisk32 followed by the required disk and
switches.
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing partitions using GDisk 129
Overview of main command-line switches
Overview of main command-line switches
GDisk has nine main modes of operation. The first four correspond to the menu
options on the Fdisk main menu. The mode in which GDisk operates is selected
by one of the following switches:
Table 10-1
GDisk main commands
Mode
Switch
Explanation
Create
/cre
Creates partitions: primary DOS partitions, extended
DOS partitions. This switch functions with GDisk
only.
Delete
/del
Deletes partitions of any type, including non-DOS
partitions. This switch functions with GDisk only.
Status (default)
Activate
/status
Lists information on the specified fixed disk and its
partitions.
■
■
/act
Activates and deactivates a partition (specifying it as
the bootable partition).
/-act
Hide
■
■
/hide
Hides an existing partition or unhides a hidden
partition.
/-hide
Reinitialize MBR /mbr
Reinitializes the Master Boot Record. This switch
functions with GDisk only.
Batch
/batch
Uses batch-mode command execution.
Disk wipe
/diskwipe
Wipes the contents of the whole disk. This switch
functions with GDisk only.
Boot.ini
/bootini
Makes a modification to the Windows NT/2000/XP
boot menu. This switch functions with GDisk32 only.
Download from Www.Somanuals.com. All Manuals Search And Download.
130 Managing partitions using GDisk
Overview of main command-line switches
Online Help for command-line switches
You can get an overview of the nine modes of operation and their switches by
using the Help switch as follows:
■
■
GDisk: gdisk /?
GDisk32: gdisk32 /?
Note: An additional switch not shown in Help is the /VERSION switch. This
switch shows the version information for the GDisk executable.
More detailed Help is available by qualifying the Help command with the switch
for one of the nine main modes of operation.
For example, to view the detailed Help file for Hide, type one of the following
command lines:
■
■
GDisk: gdisk /hide /?
GDisk32: gdisk32 /hide /?
Switches common to all GDisk commands
You can use the following switches for any of the nine main GDisk operations:
Table 10-2
Switches common to all GDisk commands
Explanation
Switch
/x
Prevents GDisk from using extended disk access support. This may result in
GDisk not being aware of the full capacity of the disk.
/i
Prevents GDisk from using direct IDE disk access support. This may result
in GDisk not being aware of the full capacity of the disk.
/s
/y
Prevents GDisk from using direct SCSI disk access support. This may result
in GDisk not being aware of the full capacity of the disk.
Suppresses prompting to confirm the operation. If you do not use this
switch, you are not necessarily prompted before a partition is deleted or
another possibly destructive operation is executed.
/sure
/r
Suppresses prompting to confirm the operation. Same functionality as /y.
Causes GDisk to restart the computer if the operation is successful.
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing partitions using GDisk 131
Creating a partition
Creating a partition
The create switch creates a partition of the specified type using the largest block of
unused disk space. The partition is not formatted during the operation unless the
/for switch is used. You cannot create an NTFS partition or a dynamic disk
partition.
This switch functions with GDisk only.
Note: When GDisk creates a FAT32 partition, it aligns the first data sector to a 4
KB boundary from the start of the partition.
The syntax for this command is as follows:
gdisk disk /cre {/pri| /ext| /log} [/sz: {MB|pcent{p|%}}]
[/end] [/for [/q] [/v[:label]]] [/-32] [/ntfat16]
For example, to create a FAT32 formatted partition that uses the entire disk, type
the following command:
gdisk 1 /cre /pri /for /q
Table 10-3
Create switches
Switch
disk
Explanation
Represents the physical fixed disk, from 1 to 8.
Creates a DOS partition or logical DOS drive.
Creates a primary DOS partition.
/cre
/pri
/ext
Creates an extended DOS partition.
Creates a logical DOS drive in the extended DOS partition.
/log
/sz:MB
Specifies the size of the partition in megabytes (MB). This is
rounded up to the nearest cylinder.
/sz:pcent{p|%}
/end
Specifies the size of the partition as a percentage of the total disk
size, not the available disk space.
Creates the partition at the end of the free space. If this switch is not
used, then the partition is created at the beginning of the free space.
If the command line specifies that all of the available space is to be
used to create the partition, then the /end switch is ignored.
Download from Www.Somanuals.com. All Manuals Search And Download.
132 Managing partitions using GDisk
Reinitializing the Master Boot Record
Table 10-3
Create switches
Switch
Explanation
/for
Formats the new partition once it has been created. Unless the
/ntfat16 or /-32 switches are used, the partition type is determined
by the following:
■
■
■
If the partition is less than 16MB: FAT12
If the partition is between 16MB and 512MB: FAT16
If the partition is greater than 512MB: FAT32
/q
Performs a quick format if used in combination with the /for
switch. If you do not use this switch, then GDisk performs a surface
scan of the partition and marks any bad sectors.
/v[:label]
/-32
Gives the new formatted partition the specified label when used in
combination with the /for switch.
Indicates that the partition is not formatted as FAT32. Limits
primary and logical partitions to 2048 MB. Partitions over 16 MB
are formatted as FAT16. This switch is useful if the operating system
does not support FAT32, such as Windows NT 4.
/ntfat16
Lets you create a FAT16 primary or logical partition, up to 4097
MB. The cluster size is 64 KB. Partitions over 16 MB are formatted
as FAT16. Windows 9x and DOS systems may be unable to access
partitions that are created with this switch and are over 2048 MB.
Reinitializing the Master Boot Record
Use the /mbr switch to rewrite the boot code in the Master Boot Record (MBR).
You may need to reinitialize the MBR to eliminate a boot sector virus residing
there. You can also use the /mbr switch with the /wipe option to delete a dynamic
disk.
This switch functions with GDisk only.
Note: The switch must be used when you delete Linux partitions if LILO resides
in the MBR.
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing partitions using GDisk 133
Showing information about disks
The syntax for this command is as follows:
gdisk disk /mbr [/wipe]
Table 10-4
/mbr switches
Switch
disk
Explanation
Represents the physical fixed disk, from 1 to 8.
Reinitializes the boot code in the Master Boot Record.
Deletes the partition on the disk.
/mbr
/wipe
Showing information about disks
The status switch shows information about the fixed disks and partitions on a
disk, including the model of the disk. You must specify the disk number to get
information about the partitions on a disk.
Depending on the version of GDisk that you require, the syntax for this
command is one of the following:
■
■
GDisk: gdisk [disk] [/status] [/raw] [/lba] [/ser]
GDisk32: gdisk32 [disk] [/status] [/raw] [/lba] [/ser]
Table 10-5
/status switches
Switch
disk
Explanation
Represents the physical fixed disk, from 1 to 8.
/raw
Shows the contents of the partition table in CHS form if used with the
disk switch.
/lba
/ser
Shows the contents of the partition table in logical block form if used
with the disk switch.
Shows the serial number of the disk.
Download from Www.Somanuals.com. All Manuals Search And Download.
134 Managing partitions using GDisk
Performing multiple GDisk operations using batch mode
Performing multiple GDisk operations using batch
mode
Use the batch mode switch, /batch, to perform multiple GDisk operations with a
single command. Using the /batch switch lets you avoid loading GDisk from the
boot disk each time. Batch commands can either be supplied interactively at a
prompt or in a pre-prepared text file.
If the name of a text file is supplied along with the batch mode switch, GDisk
opens the file and executes the commands within it until all commands have been
executed or one of the commands encounters an error.
Note: To use the Windows version of GDisk in the example commands, replace
gdisk with gdisk32.
For example:
C:\> gdisk /batch:cmds.txt
If the batch mode switch is supplied without a file name, GDisk prompts for the
commands to execute.
Command-line arguments that apply to all of the batch commands can be
specified on the original command line along with the batch mode switch. The
lines found in the batch file (or typed at the prompt) are appended to the already
partially formed command line.
Following is a sample batch command file called Two-new.txt. Blank lines and
lines starting with the number (hash) symbol are considered comments. These
lines are ignored. (In this example, the commands do not specify the fixed disk on
which to operate.)
# delete all partitions
/del /all
# create formatted FAT16 primary DOS partition and then create an extended
# partition
/cre /pri /-32 /for /q
/cre /ext
# create formatted FAT16 logical DOS partition
/cre /log /-32 /for /q
The following command deletes all partitions and creates two new ones on the
second fixed disk with confirmation prompting turned off:
gdisk 2 /y /batch:two-new.txt
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing partitions using GDisk 135
FAT16 partitions in Windows NT
The four commands to be executed are a combination of the original command
plus the commands from the batch file:
gdisk 2 /y /del /all
gdisk 2 /y /cre /pri /-32 /for /q
gdisk 2 /y /cre /ext
gdisk 2 /y /cre /log /-32 /for /q
Batch files may be nested recursively. For example, a second file called Std_init.txt
contains the following lines:
1 /batch:two-new.txt
2 /batch:two-new.txt
As a result, the following command performs the actions of Two-new.txt on both
fixed disks:
gdisk /batch:std-init.txt
FAT16 partitions in Windows NT
FAT16 partitions can be up to 4 GB in size using 64 K clusters in Windows NT.
GDisk can create a FAT16 partition using 64 K clusters when the
/ntfat16 switch is added to the create partition command line. This switch
disables the creation of FAT32 partitions and allows the creation of FAT16
partitions up to 4 GB.
Note: DOS and Windows 9x do not support FAT16 partitions using 64 K clusters
and are limited to 2 GB FAT16 partitions.
Deleting and wiping your disk
GDisk lets you delete data and partitions on your disk or wipe your entire disk.
You cannot delete a dynamic disk partition with the /del switch.
The switch /del /all deletes all partitions that are on the disk. Any other space that
has not been used for creating a partition is not deleted. Deleting an extended
partition also deletes any logical partition within it.
The /diskwipe switch wipes the entire disk, partitions, partition table, MBR, and
all used and unused space.
These switches function with GDisk only.
Download from Www.Somanuals.com. All Manuals Search And Download.
136 Managing partitions using GDisk
Deleting and wiping your disk
The syntax for the delete switch is as follows:
GDisk: gdisk disk /del {/pri[:nth]|/ext[:nth]|/log:nth|/p:partn-no|/all}
[/qwipe|/dodwipe|/customwipe:n]
The syntax for the diskwipe switch is as follows:
GDisk: gdisk disk /diskwipe [dodwipe| /customwipe:n]
Table 10-6
/diskwipe switches
Switch
disk
Explanation
Represents the physical fixed disk, from1 to 8.
Deletes a DOS partition or logical DOS drive.
Deletes the nth primary DOS partition. The default is 1.
/del
/pri[:nth]
/ext[:nth]
Deletes the nth extended DOS partition. The default is 1. Also deletes
any logical partitions in the extended partition.
/log:nth
Deletes the nth logical DOS drive from the extended DOS partition.
/p:partn-no
Indicates the partition to delete. Use the number reported by GDisk in
standard display mode (not using /lba or /raw) for partn-no.
/all
Deletes all partitions.
/qwipe
Overwrites the partition’s data area before deleting the partition. Makes
one pass of deleting the data on the disk.
/dodwipe
Overwrites the partition’s data area before deleting the partition. Makes
seven passes of deleting the data on the disk. This is the security
standard for the U.S. Department of Defense.
/customwipe:n Overwrites the partition’s data area n times before deleting the
partition. n can be set from 1 to 100. /customwipe:7 is equivalent to
/dodwipe.
For example:
■
gdisk 1 /del /all /qwipe completes one pass to delete all partitions and data on
disk 1.
■
■
gdisk 1 /del /p:2 /qwipe wipes partition 2 on disk 1 with one pass.
gdisk 1 /diskwipe /customwipe:15 wipes the entire disk with 15 passes.
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing partitions using GDisk 137
Activating or deactivating a partition
Activating or deactivating a partition
A computer starts in an active partition. Using the /act or /-act switches, you can
choose the partition to which the computer starts.
Depending on the version of GDisk that you require, the syntax for this
command is one of the following:
■
■
GDisk: gdisk disk /[-]act /p:partn-no
GDisk32: gdisk32 disk /[-]act /p:partn-no
Table 10-7
/act switches
Switch
disk
Explanation
Represents the physical fixed disk, from 1 to 8.
Activates a partition.
/act
/-act
Deactivates a partition.
/p:partn-no
Indicates the partition to activate or deactivate. Only primary
partitions can be activated. Use the number reported by GDisk in
standard display mode (not using /lba or /raw) for partn-no.
Hiding or unhiding a partition
You can hide a partition so that a user cannot see it.
Depending on the version of GDisk that you require, the syntax for this
command is one of the following:
■
■
GDisk: gdisk disk /[-]hide /p:partn-no
GDisk32: gdisk32 disk /[-]hide /p:partn-no
Table 10-8
/hide switches
Switch
disk
Explanation
Represents the physical fixed disk, from 1 to 8.
Hides a partition.
/hide
/-hide
Unhides a partition.
/p:partn-no
Indicates the partition to hide or unhide. Use the number reported by
GDisk in standard display mode (not using /lba or /raw) for partn-no.
Download from Www.Somanuals.com. All Manuals Search And Download.
138 Managing partitions using GDisk
Modifying the Windows NT/2000/XP boot menu
Modifying the Windows NT/2000/XP boot menu
The /bootini switch lets you make a modification to a Windows NT/2000/XP
boot menu. The following modifications are supported:
■
■
■
■
Displaying a list of current boot entries
Adding an entry to Boot.ini
Removing an entry from Boot.ini
Setting the default boot option and timeout
This switch functions with GDisk32 only.
When GDisk32 changes the state of Boot.ini, a copy of the current Boot.ini is
created. The copy is named either C:\boot_gdisk32_copy.ini or
C:\boot.ini_gdisk32_copy.
Specifying the boot.ini path and file name
The /inifile switch is common to all operations performed with the /bootini
switch.
/inifile lets you specify the full path and file name of the current Windows NT/
2000/XP Boot.ini file. This lets you locate Boot.ini if it is not on the C drive.
The default value for this switch is C:\boot.ini.
Displaying the list of current boot entries
Use the /bootini switch to display the existing boot menu for the current
Windows NT/2000/XP operating system.
The syntax for this command is as follows:
gdisk32 /bootini [/inifile:filename]
Adding an entry to Boot.ini
There are two types of functions that you can add to a Boot.ini file:
■
Start another installation of Windows NT/2000/XP that resides on a different
partition.
■
Start a non-Windows NT/2000/XP operating system that resides on a
different partition.
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing partitions using GDisk 139
Modifying the Windows NT/2000/XP boot menu
GDisk does not add an entry to Boot.ini in the following cases:
■
■
■
An entry with the description already exists in Boot.ini (case insensitive).
The referenced partition is of type Extended.
The referenced partition is hidden.
The following table describes the function of each switch for both types of entries.
Table 10-9
Boot.ini switches
Switch
Explanation
/bootini
Modifies Boot.ini.
/add
Creates a new entry in Boot.ini.
/d:diskno
/p:partno
/desc:description
/inifile:filename
Represents the physical fixed disk, from 1 to 8.
Indicates the partition from which to boot.
Specifies the description to appear in the NT boot loader menu.
Specifies the full path and file name for Boot.ini. The default
value is C:\boot.ini.
/bsectfile:filename
/winnt
Specifies the boot sector file to create. For example, C:\bsect.dat.
Adds an entry to start a Windows NT/2000/XP operating system.
/sysfolder:folder
Specifies the system folder on the Windows NT/2000/XP
operating system from which to start. The default value is Winnt.
/r
Restarts after the execution of the command.
Adding an entry for starting Windows NT/2000/XP
The syntax for this command is as follows:
gdisk32 /bootini /add /d:disknumber/p:partno /desc:description /winnt
[/sysfolder:folder] [/inifile:filename] [/r]
This entry uses the Advanced RISC Computing (ARC) style path to describe the
relative disk location for the entry. The entry has the following format:
<ARC style path>\<system folder>=“description”
For example:
multi(0)disk(0)rdisk(0)partition(1)\winnt=“Boot NT System”
Download from Www.Somanuals.com. All Manuals Search And Download.
140 Managing partitions using GDisk
Modifying the Windows NT/2000/XP boot menu
For more information, see the Microsoft Knowledge Base article Q102873 -
“BOOT.INI and ARC Path Naming Conventions and Usage.”
Note the following:
■
GDisk uses only MULTI(X) syntax when describing ARC style paths, as
opposed to SCSI(X).
■
■
GDisk always uses multi(0)disk(0) as the beginning of the ARC style path.
/winnt instructs GDisk32 to create an ARC style entry and must be used if
the target operating system is Windows NT/2000/XP. If this switch is not
used, then GDisk32 creates an entry as if the target operating system is not
Windows NT/2000/XP.
■
/sysfolder lets you specify the Windows system folder on the target operating
system. The system folder is usually Winnt. If the system folder is not Winnt,
then provide the path to this folder, but do not include the root directory.
For example, use /sysfolder:"2k\WinNt", not /sysfolder:"f:\2k\WinNt".
Adding an entry for starting a non-Windows NT/2000/XP
operating system
The syntax for this command is as follows:
gdisk32 /bootini /add /d:diskno/p:partno /desc:description [/inifile:filename]
[/bsectfile:filename] [/r]
This entry to Boot.ini references a boot sector file used to continue the boot up
process.
The entry has the following format:
<full path to boot sector file>\<boot sector file>="description"
For example:
C:\bootos2s.dat="Boot OS/2 System"
When adding this entry, GDisk does the following:
■
■
■
Reads the first sector of the targeted partition (boot sector).
Writes out the contents of that sector to a boot sector file.
Adds a reference to that boot sector file to Boot.ini.
The /bsectfile switch is optional. It is used if you want the created bootsect.dat file
to be saved somewhere other than the default location.
You must specify the full path and file name for the boot sector file that is created
when you use the /bsectfile switch.
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing partitions using GDisk 141
Modifying the Windows NT/2000/XP boot menu
GDisk32 does the following by default:
■
Builds the file name from the entry descriptions, omitting any invalid
characters under DOS rules for 8.3 file name format.
■
Creates the boot sector file in the root directory of the C drive and gives it a
.dat file extension.
For example:
gdisk32 /add /d:1 /p:2 /desc:“*** Boot OS/2 ***”
This produces a boot sector file C:\bootos2.dat.
Removing an entry from Boot.ini
The syntax to remove an entry from Boot.ini is as follows:
gdisk32 /bootini /remove /entry:nunber [/inifile:filename] [/r]
Table 10-10
/remove switches
Switch
Explanation
/remove
Removes the entry from Boot.ini.
Removes the ID of the entry from Boot.ini.
/entry:nunber
If the entry to be removed is the default boot option, then GDisk removes the
entry and sets the first entry in the remaining list as the default boot entry.
GDisk does not remove the entry if it is the only entry in Boot.ini.
Setting the default boot option and timeout
Use the /default switch to set the default boot option and timeout.
The syntax for this command is as follows:
gdisk32 /bootini /default [/entry:nunber] [/timeout:sec] [/inifile:filename] [/r]
Table 10-11
Default boot option and timeout switches
Switch
Explanation
/default
Sets the default boot option and timeout.
Sets the ID of entry as the default boot option.
Sets the number of seconds before the default boot option is selected.
/entry:number
/timeout:sec
Download from Www.Somanuals.com. All Manuals Search And Download.
142 Managing partitions using GDisk
Support for Large Hard Disks
Support for Large Hard Disks
GDisk includes large disk drive support for IDE and SCSI hard drives (disks that
exceed the 1024 cylinder BIOS limitation, which translates to a capacity greater
than 7.8 GB). GDisk can directly access hard disks through the IDE controller or
ASPI interface provided by an ASPI driver. Take care when creating partitions for
operating systems with inherent partition size limitations.
Remember the following information when you create partitions for use in
Windows 95/98:
■
On a system with a PC BIOS that does not support interrupt 13h extended
disk services, ensure that the partitions created can be used as intended.
When a primary partition or extended partition starts or ends past the 7.8
GB limit of the hard drive, it is not accessible on such systems in Windows or
in DOS-only mode. This affects all logical partitions contained within an
extended partition that starts or ends past the limit.
Remember the following information when you create partitions for use in
Windows NT:
■
According to the Microsoft Knowledge Base, Windows NT NTFS bootable
partitions cannot exceed 7.8 GB (8,455,716,864 bytes). This information is
detailed in the Microsoft Knowledge Base Article “Windows NT Boot Process
and Hard Disk Constraints,” Article ID: Q114841.
Non-bootable NTFS partitions do not have this size limitation.
■
Windows NT cannot start from partitions that start or end beyond the 1024-
cylinder boundary. If this condition exists, Windows NT reports a “Boot
Record Signature AA55 Not Found” error message.
Windows NT does not support drives larger than 7.8 GB unless you install
Service Pack 4 or apply the ATAPI hot fix to Service Pack 3. This information is
included in the Microsoft Knowledge Base Article “IBM DTTA-351010 10.1 GB
Drive Capacity Is Inaccurate,” Article ID: Q183654.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Chapter
Updating Security
Identifiers (SIDs) and
This chapter includes the following topics:
■
■
■
■
Making SID changes with Ghost Walker on Windows NT-based clients
Loss of access to external data objects
Identical user names and passwords across workstations
Using Ghost Walker
Download from Www.Somanuals.com. All Manuals Search And Download.
144 Updating Security Identifiers (SIDs) and computer names
Making SID changes with Ghost Walker on Windows NT-based clients
Making SID changes with Ghost Walker on Windows
NT-based clients
Client computers must be uniquely identified to operate on a network. This is
achieved using the Security Identifier (SID) and computer name. When you
restore an image onto a number of client computers, you must assign unique
identifiers as part of the task. You can use the Ghost Walker utility to do this.
Norton Ghost Walker capabilities
■
Runs in native DOS, allowing the SID to be changed without an additional
restart following a clone operation.
■
■
Alters the computer SID to a unique and randomly generated value.
Alters the SIDs of all local workstation users present on the operating system
installation.
■
■
Alters all local workstation user SIDs in Access Control Lists (ACLs) for file
and registry objects so that local users retain user profiles and access rights.
Alters computer names for Windows 95, 98, Me, NT, XP, and 2000 operating
systems.
Norton Ghost Walker limitations
■
Computer name change functionality is limited. The new name must contain
the same number of characters as the original.
■
Not officially endorsed by Microsoft.
Download from Www.Somanuals.com. All Manuals Search And Download.
Updating Security Identifiers (SIDs) and computer names 145
Loss of access to external data objects
SID changing limitations
SID changing is an approximate technology, as you can only change SIDs in
known locations.
Problems arise because of the following factors:
■
■
A growing number of third-party and Microsoft applications are taking their
own private or derived copies of the computer name and SID and storing
them in proprietary formats in registry and file locations.
Microsoft technologies such as Windows 2000/XP NTFS File Encryption,
Windows NT, and Windows 2000/XP Protected Storage make use of SIDs as
unique tokens. They use local workstation user SIDs as part of the
encryption key that controls access to encrypted information. Microsoft does
not address changing local workstation user SIDs.
For these reasons, you are strongly advised to test computer environments and
the applications on them before mass rollouts or upgrades.
Loss of access to external data objects
Changing the SID of a workstation or a clone of a workstation that has been in
use for some time may be more problematic than changing the SID of a newly
installed workstation or a clone of a newly installed workstation. When a
workstation user, as opposed to a domain user, creates data objects on computers
that are accessed by a peer-to-peer connection, security information is created for
those data objects that is based on the user's SID (which is based on the
workstation SID).
When Ghost Walker updates the SID, it not only changes the computer SID, but
also all of the workstation user and group SIDs. This is done because user and
group SIDs are assumed to be based on the workstation's computer SID (which is
now updated). This may mean that the security information on external
computers no longer matches the new SIDs of the workstation users, which may
result in a loss of access to those data objects.
Identical user names and passwords across
workstations
If there are two workstations in a domain that have two users with the same user
name and password, the domain gives each of them access to the other’s
resources even if their SIDs are different. This is a fairly common situation
following cloning.
Download from Www.Somanuals.com. All Manuals Search And Download.
146 Updating Security Identifiers (SIDs) and computer names
Using Ghost Walker
It appears that the accessing user is given the rights that the accessed user has by
proxy. For example, the access is performed on behalf of the accessing user by the
accessed user, just because there is a user name/password match. This can best be
seen when specific access rights are granted remotely by the accessing user to a
resource on the accessed computer. The Access Control List shows that the
accessed user is the user who has rights to the resource.
Updating the SID on a workstation does not stop this situation from occurring.
You must change the password of one of the users.
Using Ghost Walker
Ghost Walker lets you alter identification details of Windows 95, Windows 98,
Windows Me, Windows NT, and Windows 2000/XP computers following a clone
operation. Each Windows 95, 98, or Me computer can be assigned a unique
name. Each Windows NT or 2000/XP computer can be assigned a unique
computer name and a Machine Security Identifier (SID).
When you update the SID using Ghost Walker, all existing workstation users and
their passwords, permissions, and registry settings are maintained.
Ghost Walker can be operated from the graphical user interface or from the
command line. Ghost Walker does not run from:
■
■
A Windows NT or 2000 DOS shell
A Windows 95, 98, or Me DOS shell
The Ghost Walker window lists all bootable Windows 95, 98, Me, NT, XP, and
2000 systems on the computer hard drives. Ghost Walker determines that there is
an installed operating system if a full set of registry hive files and the operating
system kernel executable are located in their normal locations.
Ghost Walker lists the following operating system details:
■
■
■
■
■
■
■
Logical ID (system ID generated by Ghost Walker)
Drive number
Partition number
Volume label (partition name)
Partition file system type
Computer name
Operating system type, version, or build
Download from Www.Somanuals.com. All Manuals Search And Download.
Updating Security Identifiers (SIDs) and computer names 147
Using Ghost Walker
To alter identification details for a client computer using Ghost Walker
1
Remove any Windows NT/2000/XP workstations that are members of a
server domain.
You must add the workstation to the Domain using the new SID and
Computer Name once you have completed the update.
2
3
4
Run DOS.
At the command line, type Ghstwalk.exe.
Press Enter.
Ghost Walker lists all interpretable volumes on the computer.
■
If there is one operating system on the computer, details of this
operating system appear in the top pane and all volumes appear in the
bottom pane.
■
If there is more than one operating system on the computer, details of all
existing operating systems appear in the top pane.
5
If there is more than one operating system on the computer, in the Select a
System ID field, type an ID for the operating system to appear and click V -
Change Additional Vols to add or remove non-bootable volumes to be
updated.
You must include any additional non-bootable volumes that may have
security information or shortcuts containing the computer name of the
bootable operating system embedded in them. Failure to do so results in
mismatched data and a loss of security access.
6
7
To change the computer name, type N, and then press Enter.
The new name must be the same length as the previous name. The field you
type the name into is the correct length of the name.
The name cannot contain any of the following characters:
/\[]”:;|<>+=,?*
Press Enter to update.
This lists the new name and, for Windows NT and 2000 computers, a new
SID.
The computer name and SID updates occur in the following locations:
■
■
■
The registry of the selected operating system
The file system on which the operating system resides
Any additional volumes selected for the update
8
If you removed a Windows NT or 2000 computer from a server domain, add
the computer back to the domain.
Download from Www.Somanuals.com. All Manuals Search And Download.
148 Updating Security Identifiers (SIDs) and computer names
Using Ghost Walker
Running Ghost Walker from the command line
You can run Ghost Walker from the command line in DOS.
The command-line syntax is as follows:
GHSTWALK[/CN=
<new_computer_name>|”<random_computer_name_format>”]
[/BV=<drv>:<part>[/AV=ALL|/AV=<drv>:<part> ... ]]
[/SURE][/DIAG][/IGNORE_DOMAIN][/IGNORE_ENCRYPTFILES]
[/REBOOT][/REPORT[=<report filename>]][/#E=<license file>]
[SID=<replacement SID][/FNI][/FNS][/FNX]
[/MNUPD=<registry path>][@<argumentfile>]
[LOGGING][SAFE_LOGGING][/H|/HELP|/?]
Table 11-1 describes the command-line options.
Table 11-1
Command-line options
Switch
Description
/CN=
Specifies a new computer name.
<new_computer_
name>
The new name must be the same length as the original name and
cannot contain any of the following characters:
/\[]”:;|<>+=,?*
To include spaces in the computer name, enclose the computer
name in quotes. For example, /CN="EW PC 123"
Download from Www.Somanuals.com. All Manuals Search And Download.
Updating Security Identifiers (SIDs) and computer names 149
Using Ghost Walker
Table 11-1
Command-line options
Switch
Description
/CN=
Replaces the original computer name with a randomly generated
name using the <random_computer_name_format> template.
The <random_computer_name_format> template specifies
which sections of the new name will be randomly generated and
the type of random value to place in that location.
"<random_computer_
name_format>"
Only one instance of the following keywords is permitted in a
template:
<RANDOM_NUMERIC>- Generate random numbers
<RANDOM_ALPHA>- Generate random letters
<RANDOM_HEX>- Generate random hex digits (0-9, A-F)
Examples:
/CN=”PC<RANDOM_NUMERIC>”replaces the computer name
with a name that starts with PC, followed by a series of random
digits between 0 and 9.
/CN=”ID<RANDOM_ALPHA>X”replaces the computer name
with a name that starts with ID, followed by a series of random
letters, ending with the character X.
/CN=”<RANDOM_ALPHA>”replaces the computer name with
a name that is randomly generated using letters.
The random output fills out the format string to produce a new
computer name of the same length as the original name. Ensure
that the format string allows enough room to embed at least one
random character without exceeding the length of the original
name.
/BV=<drv:part>
/AV=<drv:part>
Specifies the drive number and partition number of the bootable
operating system installation to update.
If there is more than one operating system, then this switch must
be included in the command.
Specifies the drive number and partition number of an
additional volume containing a file system to update.
■
More than one volume may be specified by repeating the
argument for each additional volume.
■
This switch cannot be combined with /AV=ALL.
Download from Www.Somanuals.com. All Manuals Search And Download.
150 Updating Security Identifiers (SIDs) and computer names
Using Ghost Walker
Table 11-1
Command-line options
Switch
Description
/AV=ALL
Specifies that all other volumes are to be included as additional
volumes.
/AV=ALL cannot be combined with the /AV=<drv>:<part>
switch.
/SURE
/DIAG
Specifies that the update should start without user confirmation.
Specifies that the utility can only generate diagnostic dumps and
log files (not update the computer name or SID).
/IGNORE
_DOMAIN
Specifies that Ghost Walker should not check Windows NT or
2000 installations for domain membership.
/REBOOT
Restarts the computer after a successful update.
/REPORT
[=<filespec>]
Generates a report containing details of the update to
\UPDATE.RPT. An alternate report file can be specified.
/LOGGING
Specifies that diagnostic logging is generated to the Gwalklog.txt
file. Recommended for Technical Support use only.
/SAFE_
LOGGING
Ensures that all diagnostic logging gets flushed to disk by closing
and reopening the Gwalklog.txt file after every log statement.
This results in very slow execution. Recommended for Technical
Support use only.
/#E=<license file>
/H|/HELP|/?
Specifies a Ghost license file to activate Ghost Walker.
Shows command-line syntax Help.
/SID=
<replacement SID>
Specifies a replacement SID to be used instead of a randomly
generated one. The replacement SID must be in the format S-1-
5-21-xxx-xxx-xxx and have the same number of characters as the
original SID.
/IGNORE_
ENCRYPTFILES
Disables the warning generated by Ghost Walker when it
encounters Windows 2000/XP NTFS encrypted files during its
initial disk scan.
Changing the SID of a Windows 2000 installation results in
indecipherable NTFS encrypted files.
Download from Www.Somanuals.com. All Manuals Search And Download.
Updating Security Identifiers (SIDs) and computer names 151
Using Ghost Walker
Table 11-1
Switch
Command-line options
Description
/MNUPD=
<registry path>
Specifies a registry location that you want Ghost Walker to search
for instances of the computer name to update them. This registry
key and its subkeys are searched for wholly matched instances of
the computer name (of the same length). If any are found, they
are updated to the new computer name.
Multiple registry locations may be specified with multiple
instances of this switch.
@<argumentfile>
Specifies a file containing command-line switches that Ghost
Walker should open and read in addition to those specified in the
command line.
/FNI
/FNS
/FNX
Disables the direct IDE drive access method.
Disables the direct SCSI drive access method.
Disables the Extended Int0x13 drive access method.
Following is an example of command line use:
GHSTWALK /BV=1:2 /AV=1:1 /AV=2:1 /CN=”WS4-<RANDOM_HEX>-443”/SURE
The above command line does the following:
■
■
■
Updates the Windows 95, 98, Me, NT, XP, or 2000 installation located on the
second partition of the first disk.
Updates file systems on additional volumes on the first partition of the first
and second disks.
Changes the computer name to one starting with WS4- and ending with -
443, placing random hexadecimal values in the remaining spaces until the
new name is the same length as the old one. For example, WS4-53ADF76-
443.
■
Does not prompt the user for final confirmation.
Download from Www.Somanuals.com. All Manuals Search And Download.
152 Updating Security Identifiers (SIDs) and computer names
Using Ghost Walker
Download from Www.Somanuals.com. All Manuals Search And Download.
154 Command-line switches
Using Norton Ghost with switches
Using Norton Ghost with switches
Norton Ghost can be run in the following ways:
■
■
■
Interactively with no command-line switches
Interactively with selected switches
Automated in batch files (batch mode)
The Norton Ghost command-line switches are used to alter Norton Ghost
behavior and automate procedures.
If you are adding switches from the Advanced Options dialog box, some of these
switches, for example, the -clone switch, are not applicable to your task. Because
you are already performing a backup, restore, or clone operation, the -clone
switch is redundant.
To list Norton Ghost command-line switches
◆
In the Ghost directory, type one of the following:
■
ghost.exe -h
ghost.exe -?
■
A hyphen (-) or a slash (/) must precede all switches except @. Switches are not
case sensitive. They can be entered in upper, lower, or mixed case.
Command-line switches
@filename
Specifies a file that contains additional command-line switches that Norton Ghost should
read. Filename indicates the path and file name of the command-line switch file. The
command-line switch file can include any Norton Ghost command-line switch, except for
-afile and -dfile. The Norton Ghost command-line switch file must be a text file with each
switch on a separate line. This feature lets you exceed the DOS command-line limit of 150
characters.
For example, for the following command line:
ghost.exe @ghswitch.txt
The file Ghswitch.txt would read:
-clone,mode=pcreate,src=1:2,dst=g:\part2.gho
-fcr
-sure
Download from Www.Somanuals.com. All Manuals Search And Download.
Command-line switches 155
Command-line switches
-afile=filename
-auto
Replaces the default abort error log file name, Ghosterr.txt, with the directory and file
given in filename.
Automatically names spanned image files during creation. Using this switch avoids the
user prompt that asks for confirmation of the next destination location for the remainder
of the image file that is being loaded. This switch is the default behavior for Norton Ghost.
-batch
Batch mode switch. Prevents abort messages from waiting for user acknowledgment, and
removes user interaction prompts. The return value of Ghost.exe must be checked to
identify whether the operation was successful. Norton Ghost returns 0 on success and 1 or
higher on failure or error.
-bfc
Handles bad FAT clusters when writing to disk. If this switch is set, and the target
partition is FAT, Norton Ghost checks for and works around bad sectors. This option may
slow Norton Ghost operation substantially.
-bootcd
-buffersize=x
When writing an image directly to a CD/DVD writer, makes the CD/DVD bootable. You
need a bootable floppy disk in drive A. If you use the -sure switch with -bootcd, and a
floppy disk is not in drive A, then a non-bootable CD/DVD is created.
Ghost creates an image file using a small buffer where x = number of KB. The size of the
buffer is automatically calculated by Norton Ghost. The buffersize switch lets you override
this size. You can set the buffer size value from 1 to 32.
-chkimg,filename
-clone
Checks the integrity of the image file indicated by filename.
Ghost.exe operation switch. This switch allows automation of Ghost.exe operations and
has a series of arguments that define the operation parameters.
See “Clone switch usage” on page 166.
-cns
Reverts the naming of spanned files to the system used by versions of Norton Ghost prior
to Symantec Ghost 6.5. If this switch is not used, then the naming of spanned files
conforms to Microsoft application guidelines. You do not need to use this switch when
reading an existing file. Use this switch when the first five characters in a file name must be
unique. For example:
With -cns
Without -cns
Filename.gho
Filen001.ghs
Filen002.ghs
Filename.gho
Filename.001
Filename.002
Download from Www.Somanuals.com. All Manuals Search And Download.
156 Command-line switches
Command-line switches
-CRC32
The -CRC32 switch lets you make a list of the files on a disk or partition or create an
image file with CRC values and then verify the list against the original or a copy. The
purpose is to allow both quick listing of the contents of an image file and verification that
a disk created by Norton Ghost contains the same files as the original.
See “-CRC32 switch usage” on page 172.
-crcignore
-cvtarea
Ignores CRC errors. CRC errors indicate data corruption. This switch overrides the CRC
error detection and may let a corrupted image file be used. Using this switch leaves the
corrupted files in an unknown state. You can use this switch to help you extract files from
a corrupted image file.
Creates a file, Cvtarea.tmp, that is the location of the MFT when the FAT32 partition is
converted to NTFS. This switch operates in a similar manner to the cvtarea program that
Microsoft provides in Deploy.cab on the Windows XP installation CD.
For more information, see the Microsoft Web site:
http://www.microsoft.com/hwdev/tech/storage/ntfs-preinstall.asp
The file is created in the root directory of the partition during a partition or disk restore
and is created as a contiguous space on the disk. The largest size allowed is 4 GB. If the file
is larger than this, it is truncated to 4 GB.
The syntax for this switch is as follows:
-cvtarea,filename=xxx,size=yyy{%disk,%free,KB,MB,GB},
firstcluster=zzz{%disk,%free,KB,MB,GB}
The default settings are as follows:
filename
size
cvtarea.tmp
12%disk
firstcluster
1|3 GB|33%disk
Defaults to:
■
■
■
1/3 of the partition size if the partition size is less than 2 GB
1 GB if the partition size is less than 6 GB
3 GB if the partition size is equal to or greater than 6 GB
-dd
Dumps disk metrics information to the dump log file, Ghststat.txt. The file location can be
altered using the -dfile=filename switch.
-dfile=filename
Changes the path and file name of the dump log file created using the -dd switch. This
switch cannot be included in the @ Ghost switch text file
Download from Www.Somanuals.com. All Manuals Search And Download.
Command-line switches 157
Command-line switches
-dl=number
-dlist=drives
Specifies the number of hard disks present. Valid numbers are between 1 and 8. This may
help when the BIOS does not report the number of drives correctly.
Specifies a list of drives to search for span files. If a span file cannot be found, then the
drive letters in dlist are substituted one by one to look for the file on other drives.
For example, the command ghost -dlist=CDEFG instructs Norton Ghost to look for files
on C, D, E, F, and G drives. The path remains the same.
-f32
-f64
Lets Norton Ghost convert all FAT16 volumes to FAT32 volumes when the destination
partition to convert is larger than 256 MB in size. Ensure that the installed operating
systems can access the volumes that will be converted to support FAT32.
Lets Norton Ghost resize FAT16 partitions to be larger than 2047 MB using 64 K clusters.
This is only supported by Windows NT and Windows 2000. Do not use on computers
with other operating systems
-fatlimit
-fcr
Limits the size of FAT16 partitions to 2047 MB. Useful when Windows NT FAT16
partitions are present on the disk and 64 K clusters are not wanted
Creates a CRC32 file, Ghost.crc, while creating an image file.
See “-CRC32 switch usage” on page 172.
-fdsp
Preserves the signature bytes on the destination disk when performing a disk-to-disk or
image-to-disk cloning operation
-fdsz
Clears the signature bytes on the destination disk when performing a disk-to-disk or
image-to-disk cloning operation.
-femax
-ffatid
When an extended partition is created in a disk-to-disk or image-to-disk operation, the
femax switch ensures that the extended partition takes up all free space.
Forces the FAT partition id. This switch changes the partition id to the recommended
partition id for the FAT partition within the destination image file or the destination
partition table. This switch only takes effect if the source is a disk or partition, not an
image file.
For example, if you are cloning a partition of type 0xA0 (some unknown partition id), and
Norton Ghost sees it as a valid FATx (FAT12/FAT16/FAT32) partition, then the partition id
is changed from 0xA0 to FATx.
This was default Norton Ghost behavior before Symantec Ghost 7.5. This switch allows
for backward compatibility.
-ffi
Prefers the use of direct IDE access for IDE hard disk operations. This switch does not
have any effect when running Norton Ghost in Windows 98.
-ffs
-ffx
Prefers the use of direct ASPI/SCSI disk access for SCSI hard disk operations.
Prefers the use of Extended Interrupt 13h disk access for hard disk operations.
Download from Www.Somanuals.com. All Manuals Search And Download.
158 Command-line switches
Command-line switches
-finger
-fis
Shows the fingerprint details written on a hard disk created by Norton Ghost. The
fingerprint details include the process used to create the disk or partition and the time,
date, and disk on which the operation was performed.
Uses all available disk space when creating partitions. By default, Norton Ghost often
leaves a small amount of free space at the end of the disk. Because partitions must be
aligned to cylinder boundaries, Norton Ghost may leave up to 5 MB free even when -fis is
specified.
-fni
-fns
Disables direct IDE access support for IDE hard disk operations.
This switch has the same functionality as the -noide switch.
Disables direct ASPI/SCSI access support for SCSI hard disk operations.
This switch has the same functionality as the -noscsi switch.
-fnx
-fro
-fx
Disables extended INT13 support for hard disk operations.
Causes Norton Ghost to exit to DOS after operation completion. By default, Norton Ghost
prompts the user to restart or exit when the operation has finished. If Norton Ghost is run
as part of a batch file, it is sometimes useful to exit back to the DOS prompt after
completion so that further batch commands can be processed.
See “-rb” on page 162.
-ghostoncd
-h or -? or -help
-ia
Includes Ghost.exe on a CD/DVD when writing an image to a CD/DVD.
Shows the Norton Ghost command-line switch Help page.
The image all switch forces Norton Ghost to perform a sector-by-sector copy of all
partitions. When copying a partition from a disk to an image file or to another disk,
Norton Ghost examines the source partition and decides whether to copy just the files and
directory structure, or to do a sector-by-sector copy. If it understands the internal format
of the partition, it defaults to copying the files and directory structure. Generally this is the
best option. However, if a disk has been set up with special hidden security files that are in
specific positions on the partition, the only way to reproduce them accurately on the
target partition is through a sector-by-sector copy. If you use this switch to create an
image of a dynamic disk, then the image must be restored to a disk with identical
geometry.
-ial
-ib
Forces a sector-by-sector copy of Linux partitions. Other partitions are copied as normal.
The image boot switch copies the entire boot track, including the boot sector, when
creating a disk image file or copying disk-to-disk. Use this switch when installed
applications, such as boot-time utilities, use the boot track to store information. By
default, Norton Ghost copies only the boot sector, and does not copy the remainder of the
boot track. You cannot perform partition-to-partition or partition-to-image functions
with the -ib switch.
Download from Www.Somanuals.com. All Manuals Search And Download.
Command-line switches 159
Command-line switches
-id
The image disk switch is similar to -ia (image all), but also copies the boot track, as in -ib
(image boot), extended partition tables, and unpartitioned space on the disk. When
looking at an image with -id, you see the unpartitioned space and extended partitions in
the list of partitions. The -id switch is primarily used by law enforcement agencies that
require forensic images.
When Norton Ghost restores from an -id image, it relocates partitions to cylinder
boundaries and adjusts partition tables accordingly. Head, sector, and cylinder
information in partition tables is adjusted to match the geometry of the destination disk.
Partitions are not resizeable. You will need an identical or larger disk than the original.
Norton Ghost does not wipe the destination disk when restoring from an -id image.
Geometry differences between disks may leave tracks on the destination disk with their
previous contents.
Use the -ia (image all) switch instead of the -id switch when copying partition-to-partition
or partition-to-image. An individual partition can be restored from an image created with
-id.
-imgdesc
Adds a single-line image file description to the image file. This has the following
restrictions:
■
■
■
■
Cannot include any new lines
Cannot be used with -imgdescfile
Must be used with the clone switch
Clone switch mode must be create, dump, prcreate, or pdump
-imgdescfile
Specifies a text file that contains an image file description to be added to the image file.
This has the following restrictions:
■
■
■
Cannot be used with -imgdesc
Must be used with the clone switch
Clone switch mode must be create, dump, prcreate, or pdump
-ir
The image raw switch copies the entire disk, ignoring the partition table. This is useful
when a disk does not contain a partition table in the standard PC format, or you do not
want partitions to be realigned to track boundaries on the destination disk. Some
operating systems may not be able to access unaligned partitions. Partitions cannot be
resized during restore and you need an identical or larger disk.
-jl:x=filename
Creates a log file to assist in diagnosing problems with TCP/IP connections. The amount
of information logged is set by the log level, x. The log level x can be E (errors), S
(statistics), W (warnings), I (information), or A (all), in increasing order of logging detail.
The file name indicates the path and file name of the log to be created. In general, the error
and statistic levels do not affect session performance. All other levels may reduce
performance and should be used for diagnostic purposes only.
-lockinfo
Shows the type code and information stored in the BIOS or the Pentium III Processor ID.
For example:
Download from Www.Somanuals.com. All Manuals Search And Download.
160 Command-line switches
Command-line switches
Type
M
P
Based On
Manufacturer
Product name
Version
Value
Compaq
Deskpro EN Series SFF
Award Software
V
S
Serial number
UUID
H925CKH60020
U
C
2DA9379B4707D31185E8C800A4F232BC
Compaq Deskpro EN Series SFF
0000067200028E72A6994A20
M&P combined
PIII ID
I
-locktype= Type
Lets you lock an image file for use with a specific set of computers defined by the type
chosen and the source computer.
For example, ghost -locktype=P creates an image that can be used only on systems that
have the same product name type as the source computer.
-lpm
-lps
mode, and is the equivalent of selecting LPT Master from the main menu.
See “Peer-to-peer connections” on page 178.
The LPT slave mode switch causes Norton Ghost to automatically go into LPT slave mode,
and is the equivalent of selecting LPT Slave from the main menu.
See “Peer-to-peer connections” on page 178.
-memcheck
-noauto
Disables the automatic naming of spanned image files during creation. The user is
prompted for confirmation of the next destination location for the remainder of the image
file that is being restored.
-noautoskip
-nofile
Includes the hibernation and skip files in the image file. These files are excluded by
default.See “Hibernation and swap files” on page 69.
Disables the Image File Selection dialog box. Useful when opening directories with large
numbers of files and slow links.
-noide
Disables access to IDE devices.
-noindex
Prevents Norton Ghost from creating an index when creating an image file. This slightly
reduces the size of the image file and saves memory but Ghost Explorer is much slower in
reading the image file. This switch is useful if you are saving an image file from a large disk
with very little memory.
Download from Www.Somanuals.com. All Manuals Search And Download.
Command-line switches 161
Command-line switches
-nolilo
Does not attempt to patch the LILO boot loader after a clone. If you use the -nolilo switch,
you need to start from a floppy disk after the clone and then run /sbin/lilo as the root user
to reinstall LILO.
-noscsi
-ntc-
Disables access to SCSI devices using ASPI.
Disables NTFS contiguous run allocation.
-ntchkdsk
Sets the CHKDSK bit set on a copied NTFS volume. This causes Windows NT to check the
integrity of the volume when it is started.
-ntd
-ntic
Enables NTFS internal diagnostic checking.
Ignores the NTFS volume CHKDSK bit. Norton Ghost checks the CHKDSK bit on an
NTFS volume before performing operations. When Norton Ghost indicates that the
CHDSK bit is set, you should run CHKDSK on the volume to ensure that the disk is in a
sound state before cloning.
-ntiid
By default, Norton Ghost copies partitions participating in an Windows NT volume set,
stripe set, or mirror set using image all sector-by-sector copying. This switch forces Norton
Ghost to ignore the Windows NT volume set partition status and image the partition as if
it were an NTFS partition to let it be intelligently imaged on a file-by-file basis. Take care
when using this switch. Do not use the -ntiid switch with volume sets and stripe sets.
To clone mirrored partitions (also known as Windows NT software RAID partitions)
1
2
3
With Windows NT disk administrator, break the mirror set.
Using the -ntiid switch, clone one of the mirror partitions.
Resize as desired. Partitions can only be resized by Norton Ghost during a disk
operation. When performing a partition operation, the target partition size must
already be established.
4
After cloning, recreate the mirror set using the Windows NT disk administrator. The
disk administrator creates the partitions in the mirror set.
-ntil
-or
Ignores NTFS log file check (inconsistent volume).
The override switch allows the override of internal space and integrity checks and lets you
put a very big image into a small partition. The operation fails if it is unable to write to the
limited partition size. This switch lets you override spanning, which fails if there is limited
space. Avoid using this switch.
-pmbr
Specifies that the master boot record of the destination disk is to be preserved when
performing a disk-to-disk or image-to-disk cloning operation.
-pwd and -pwd=x
Specifies that password protection be used when creating an image file.
x indicates the password for the image file. If no password is given in the switch, Norton
Ghost prompts for one. You can enter a maximum of 10 alphanumeric characters.
Download from Www.Somanuals.com. All Manuals Search And Download.
162 Command-line switches
Command-line switches
-quiet
-rb
The quiet mode switch disables status updates and user intervention.
Restarts after finishing a restore or copy. After completing a restore or copy operation, the
target computer must be restarted so that the operating system can restore the new disk/
partition information. Normally, Norton Ghost prompts the user to restart or exit. -rb tells
Norton Ghost to restart automatically after it completes the restore or copy. This is useful
when automating Norton Ghost in a batch command file.
See “-fx” on page 158.
-script
Allows you to specify a series of commands (one per line) that Norton Ghost will execute
in sequential order.
For example:
ghost -script=script.txt
Following is an example of script.txt:
-clone,mode=create,src=2,dst=c:\drv2.gho
-chkimg,c:\drv2.gho
-clone,mode=create,src=2,dst=c:\part2.gho
-chkimg,c:\part2.gho
Download from Www.Somanuals.com. All Manuals Search And Download.
Command-line switches 163
Command-line switches
-skip=x
The skip file switch causes Norton Ghost to exclude the indicated files during a create or
restore operation. A skip entry can specify a single file, a directory, or multiple files using
the * wildcard. File names must be given in short file name format and all path names are
absolute. Only FAT system files can be skipped. It is not possible to skip files on NTFS or
other file systems. The skip switch may only be included in the command line once. To
specify multiple skip entries, they must be included in a text file indicated using
-skip=@skipfile. The format of the skip text file, skipfile, matches the format used with the
CRC32 vexcept option.
For example:
■
■
■
■
■
-skip=\windows\user.dll
Skips the file User.dll in the Windows directory.
-skip=*\readme.txt
Skips any file called Readme.txt in any directory.
-skip=\ghost\*.dll
Skips any file ending with .dll in the Ghost directory.
-skip=\progra~1\
Skips the program files directory (note the short file name).
Skips files as outlined in Skipfile.txt. For example, if Skipfile.txt contains:
*\*.tmt
[partition:1]
\windows\
*\*.exe
[Partition:2]
*\*me.txt
This would skip all *.tmt files on any partition, the Windows directory, all *.exe files
on the first partition, and any file that ends with me.txt on the second partition.
-span
Enables spanning of image files across volumes.
Do not use this switch if you are running Ghost.exe to write an image file directly to a CD-
R/RW. Ghost.exe automatically spans CD-R/RW disks if required.
-split=x
Splits image file into x MB spans. Use this switch to create a forced-size volume set. For
example, if you want to force smaller image files from a 1024 MB drive, you could specify
200 MB segments.
For example:
ghost.exe -split=200
This divides the image into 200 MB segments.
-sure
Use the -sure switch in conjunction with -clone to avoid being prompted with the final
question “Proceed with disk clone - destination drive will be overwritten?” This command
is useful in batch mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
164 Command-line switches
Command-line switches
-sze
Sets the size for the destination partitions for either a disk restore or disk copy operation.
When numbering partitions in the -sze switch, do not include the hidden Ghost partition.
See “Setting a destination size for the clone switch” on page 169.
-szee
Forces Norton Ghost to keep the sizes of all destination partitions the same as in the source
partition (no resizing).
This switch can be used with or without the -clone switch.
See “Setting a destination size for the clone switch” on page 169.
-szef
-szel
Forces Norton Ghost to keep the sizes of all destination partitions, except for the first one,
the same as in the source partition. The first partition uses the remaining disk space.
This switch can be used with or without the -clone switch.
See “Setting a destination size for the clone switch” on page 169.
Forces Norton Ghost to keep the sizes of all destination partitions, except for the last one,
the same as in the source partition. The last partition uses the remaining disk space.
This switch can be used with or without the -clone switch.
See “Setting a destination size for the clone switch” on page 169.
-tapebuffered
-tapeeject
Default tape mode. Sets the ASPI driver to report a read/write as successful as soon as the
data has been transferred to memory. Useful when using older or unreliable tape devices or
sequential media.
Forces Norton Ghost to eject the tape following a tape operation. If the tape drive does not
support remote ejection you must eject and insert the tape manually before further use.
Earlier versions ejected the tape by default. By default, Norton Ghost does not eject the
tape. It rewinds the tape before exiting to DOS.
-tapesafe
Sets the ASPI driver to report a read/write as successful only when the data has been
transferred to the physical medium. Useful when using older or unreliable tape devices or
sequential media.
-tapebsize=x
-tapespeed=x
Specifies the tape block size in units of 512 bytes, where x is 1 to 128.
Allows control of tape speed, where x is 0 to F. 0 is the default. 1 to F increase tape speed.
Only use this when the tape does not work correctly at the speed used by Norton Ghost.
-tapeunbuffered
transferred to the tape drive. (It is possible that this occurs before the data is physically
written to the medium.)
-tcpm[:slave IP address] The TCP/IP master mode switch causes Norton Ghost to go into TCP/IP master mode
automatically, and is the equivalent of selecting TCP/IP Master from the main menu. The
IP address of the slave computer may be specified. See “Peer-to-peer connections” on
page 178.
Download from Www.Somanuals.com. All Manuals Search And Download.
Command-line switches 165
Command-line switches
-tcps
The TCP/IP slave mode switch causes Norton Ghost to go into TCP/IP slave mode
automatically, and is the equivalent of selecting TCP/IP Slave from the main menu.
-usbm
The USB master mode switch causes Norton Ghost to go into USB master mode
automatically, and is the equivalent of selecting USB Master from the main menu. This
switch should precede the -clone switch. For example,
ghost.exe -usbm -clone,mode=dump,src=1,dst=1:1\image.gho See “Peer-to-peer
connections” on page 178.
-usbs
-vdw
The USB slave mode switch causes Norton Ghost to go into USB slave mode automatically,
and is the equivalent of selecting USB Slave from the main menu. This switch should
precede the -clone switch. See “Peer-to-peer connections” on page 178.
If this switch is set, Norton Ghost uses the disk’s verify command to check every sector on
the disk before it is written. This option may slow Norton Ghost operation substantially.
-ver
-z
Shows the version number of Norton Ghost.
compression, the slower the transmission.
■
■
■
-z or -z1: Low compression (fast transmission)
-z2: High compression (medium transmission)
-z3 through -z9: Higher compression (slower transmission)
See “Image files and compression” on page 62.
Download from Www.Somanuals.com. All Manuals Search And Download.
166 Command-line switches
Clone switch usage
Clone switch usage
The syntax for the clone switch is:
-clone,MODE={operation},SRC={source},DST={destination},
[SZE{size},SZE{size}.......]
Defining the type of clone command
MODE defines the type of clone command. The syntax is as follows:
MODE={copy | restore | create | pcopy | prestore | pcreate}
Table A-1
Mode commands
Switch
copy
Action
Disk-to-disk copy
File-to-disk restore
restore
Note: The load switch has been replaced by the
restore switch. The load switch is still fully
functional and is interchangeable with restore.
create
Disk-to-file backup
Note: The dump switch has been replaced by
the create switch. The dump switch is still fully
functional and is interchangeable with create.
pcopy
Partition-to-partition copy
File-to-partition restore
prestore
Note: The pload switch has been replaced by
the prestore switch. The pload switch is still fully
functional and is interchangeable with prestore.
pcreate
Partition-to-file backup. This allows
multipartition Ghost backup selection
for file.
Note: The pdump switch has been replaced by
the pcreate switch. The pdump switch is still
fully functional and is interchangeable with
pcreate.
Download from Www.Somanuals.com. All Manuals Search And Download.
Command-line switches 167
Clone switch usage
Cloning combination options
Table A-2 illustrates the possible cloning operations that you can perform.
Table A-2
Cloning operations
Mode
copy
Source
Destination
■
disk
■
■
disk
disk
restore
■
■
■
■
file
tape
Note: The load switch has been
replaced by the restore switch. The
load switch is still fully functional and
is interchangeable with restore.
CD-ROM
USB 1.1 and 2.0
Mass Storage Device
■
■
DVD
create
disk
■
■
■
■
file
tape
Note: The dump switch has been
replaced by the create switch. The
dump switch is still fully functional
and is interchangeable with create.
CD writer
USB 1.1 and 2.0
Mass Storage
Device
■
■
■
DVD
pcopy
■
disk:partition
disk:partition
disk:partition
prestore
■
■
■
■
file:partition
tape:partition
Note: The pload switch has been
replaced by the prestore switch. The
pload switch is still fully functional
and is interchangeable with prestore.
CD:image:partition
USB 1.1 and 2.0
Mass Storage Device
pcreate
■
■
disk:partition
■
■
■
■
file
partition:partition
tape
Note: The pdump switch has been
replaced by the pcreate switch. The
pdump switch is still fully functional
and is interchangeable with pcreate.
CD writer
You can specify more
than one partition.
USB 1.1 and 2.0
Mass Storage
Device
■
DVD
Setting a source for the clone switch
The syntax for this switch is as follows:
SRC={disk | file | tape |cd/dvdwriter }
Download from Www.Somanuals.com. All Manuals Search And Download.
168 Command-line switches
Clone switch usage
SRC defines the source for the operation selected by the clone mode option.
Table A-3
Source options for cloning
Switch Source
Explanation
disk
drive number
Source disk drive number. Numbers start at 1. For example:
SRC=1
A partition on a drive can also be specified. Numbers start at
1. For example:
SRC=1:2
file
filename
The source image file name. For example:
SRC= g:\source.gho
A partition in an image file can also be specified. For
example:
SRC=g:\source.gho:2
Files can also be read from a CD-ROM drive.
To specify a file located on a file system not recognized by
DOS, such as, NTFS, use the same format as the disk switch,
specifying both a disk and partition. For example:
src=1:2\image.gho
In this example, Image.gho resides on an NTFS file system on
the second partition of the first disk.
tape
@MTx
@CDx
The tape drive number. Numbers start at 0. For example:
SRC=@MT0
A partition on a tape can also be specified. For example:
SRC=@MT0:3
CD
ROM
The CD or DVD drive number. If you have a CD reader and a
CD writer, in the Ghost.exe user interface you would see
@CD1 and @ CD2. The number is optional if you are
specifying an operation from the command-line.
You can specify partitions for the image stored on a CD for a
restore operation. For example:
SRC=@CD1:2
Download from Www.Somanuals.com. All Manuals Search And Download.
Command-line switches 169
Clone switch usage
Setting a destination for the clone switch
The syntax for this switch is as follows:
DST={disk | file | tape | cd/dvdwriter}
DST defines the destination location for the operation.
Table A-4
Destination options for cloning
Switch
Destination Explanation
disk
drive
The destination disk drive number, such as DST=2
A partition on a drive can also be specified. For example:
DST=2:1
To create a new partition, type a destination partition one
greater than the existing number of partitions, if there is
enough free space.
file
filename
The destination image file name. For example:
DST= g:\destination.gho
To specify a file located on a file system not recognized by
DOS, such as NTFS, use the same format as the disk switch,
specifying both a disk and partition. For example:
dst=1:2\image.gho
In this case, Image.gho is created on the NTFS volume that
resides on the second partition on the first disk.
tape
@MTx
@CDx
The tape drive number. Numbers start at 0. For example:
DST=@MT0
cd/
dvdwriter
The CD or DVD writer drive number. Numbers start at 1. For
example:
DST=@CD1
If you have a CD reader and a CD writer, in the Ghost.exe
user interface you would see @CD1 and @ CD2. The number
is optional if specifying an operation from the command-
line.
Setting a destination size for the clone switch
SZE sets the size of the destination partitions for either a disk restore or disk copy
operation. This is optional. Multiple partition size switches are supported.
Download from Www.Somanuals.com. All Manuals Search And Download.
170 Command-line switches
Clone switch usage
The number of size switches depends on the number of partition sizes that you
want to specify. There may be none.
SZE{E | F | L | n={xxxxM | mmP| F | V}}
Table A-5
Destination size options for cloning
Explanation
Switch
n=xxxxM
Indicates that the nth destination partition is to have a size of xxxxMB
(for example, SZE2=800M indicates partition two is to have 800 MB).
n=mmP
Indicates that the nth destination partition is to have a size of mm percent
of the target disk. Due to partition size rounding and alignment issues,
100% physical use of disk space may not be possible.
n=F
n=V
Indicates that the nth destination partition is to remain the same size on
the destination as it was on the source. This is referred to as fixed size.
Indicates that the partition may be made bigger or smaller depending on
how much disk space is available. This is the default.
E
F
The sizes of all partitions remain fixed.
The sizes of all partitions except the first remain fixed. The first partition
uses the remaining space.
L
The sizes of all partitions except the last remain fixed. The last partition
uses the remaining space.
Examples of clone switch usage
Table A-6 describes clone switches and their functions.
Table A-6
Switch
Clone switch usage examples
Function
ghost.exe -clone,mode=copy,src=1,dst=2
Copies local disk one to local disk
two.
ghost.exe -lpm -clone,mode=create,src=2,dst= Connects a master computer using
c:\drive2.gho
LPT to another computer running
Norton Ghost in slave mode, and save
a disk image of local disk two to the
remote file c:\drive2.gho. The slave
computer can be started with
ghost.exe -lps.
Download from Www.Somanuals.com. All Manuals Search And Download.
Command-line switches 171
Clone switch usage
Table A-6
Switch
Clone switch usage examples
Function
ghost.exe -clone,mode=pcopy,src=
1:2,dst=2:1 -sure
Copies the second partition of local
disk one to the first partition of local
disk two, without the final warning
prompt.
ghost.exe -clone,mode=restore,
src=e:\savedsk.gho,dst=1-sure
Restores the disk image file
Savedsk.gho that is held on the server
drive that is mapped locally to drive E
onto local disk one. Performed
without the final warning prompt.
This example is typical of a command
line included in a batch file to
automate workstation installations
from a network file server.
ghost.exe -clone,
mode=pcreate,src=1:2,dst=g:\part2.gho
Saves the second partition of disk one
to an image file on mapped network
drive G.
ghost -clone,
mode=prestore,src=g:\part2.gho:2,dst=1:2
Restores partition two from a two-
partition image file on mapped drive
G onto the second partition of the
local disk.
ghost.exe -clone,mode=restore,src=
g:\2prtdisk.gho,dst=2sze1=60P,sze2=40P
Restores disk two from an image file
and resizes the destination partitions
into a 60:40 allocation.
ghost.exe -clone,mode=copy,src=
1,dst=2,sze2=F
Clones a two-partition disk and keeps
the second partition on the
destination disk the same size as on
the source disk, and lets the first
partition use the remaining space,
leaving no unallocated space.
ghost.exe -clone,
mode=create,src=1,dst=2:3\image.gho
Saves disk one to the image file
image.gho located on the third
partition of the second disk.
This works only if the third partition
of the second disk is NTFS file system.
Download from Www.Somanuals.com. All Manuals Search And Download.
172 Command-line switches
-CRC32 switch usage
Table A-6
Switch
Clone switch usage examples
Function
ghost.exe -clone,mode=prestore,
src=2:3\image.gho:5,dst=4:2
Restores the fifth partition of the
image file image.gho, which is located
on the third partition of the second
disk, to the second partition on the
4th disk. This switch only works if the
third partition on the second disk is
NTFS.
ghost.exe-clone,mode=restore,
src=g:\3prtdisk.gho,dst=1,
sze1=450M,sze2=1599M,sze3=2047M
Restores disk one from an image file
and resize the first partition to 450
MB, the second to 1599 MB, and the
third to 2047 MB.
ghost.exe -clone,mode=restore,src=
g:\2prtdisk.gho,dst=1,szeL
Restores a disk from an image file and
resizes the last partition to fill the
remaining space.
ghost.exe -clone,mode=copy,src=
2:2,dst=@MT0
Creates an image file of the second
partition on disk 2 onto the first tape
drive.
ghost.exe -clone,mode=pcreate,src=
2:1:4:6,dst=d:\part146.gho
Creates an image file with only the
selected partitions.
This example selects partitions 1, 4,
and 6 from disk 2.
-CRC32 switch usage
CRC checking works file-by-file with FAT partitions. NTFS partitions are CRC-
checked within an image file by each MFT table. It is not possible at present to
obtain a list of files failing a CRC check with an NTFS file system. When a CRC
file is created for an NTFS partition, only a single CRC value is generated. You
can also create a CRC file from an image file and verify it against a disk.
The full syntax for this switch is as follows:
-CRC32,action={create|verify|pcreate|pverify|dcreate|dverify},
src={{disk}|{partition}|{file}},crcfile={file}|{partition},vlist={file},vexcept={file}
Download from Www.Somanuals.com. All Manuals Search And Download.
Command-line switches 173
-CRC32 switch usage
The following parameters can be used with the -CRC32 switch:
Table A-7
Parameters for the -CRC32 switches
Explanation
Parameter
create
Create an ASCII CRC32 file from a disk
Verify a disk from a CRC32 file
verify
pcreate
pverify
dcreate
dverify
crcfile
Create an ASCII CRC32 file from a partition
Verify a partition from an ASCII CRC32 file
Create an ASCII CRC32 file from an image file
Verify an image file from an ASCII CRC32 file
ASCII CRC32 file (default=Ghost.crc)
Verification list file (default=Ghost.ls)
Verification exception file (no default)
vlist
vexcept
Examples of -CRC32 usage
This table provides some examples of how you can use the -CRC32 switch.
Table A-8
-CRC32 usage examples
Switch
Function
ghost.exe -fcr
Creates a CRC32 file (called
Ghost.crc) while making an image
file.
ghost.exe -fcr=d:\test.crc
Creates a CRC32 file (called Test.crc)
while making an image file.
ghost.exe -crc32,
action=create,src=1,crcfile=ghost.crc
Creates a list of files and CRC32
values for a disk.
ghost.exe -crc32,action=dverify,src=
x:dumpfile.gho,crcfile=ghost.crc
Verifies the list against an image file.
ghost.exe -crc32,action=pverify,src=
1:2,crcfile=filename.crc:2
Verifies a partition in an image file
with multiple partitions. This
example verifies that partition 2 on
disk 1 is the same as partition 2 in the
CRC file.
Download from Www.Somanuals.com. All Manuals Search And Download.
174 Command-line switches
-CRC32 switch usage
Table A-8
Switch
-CRC32 usage examples
Function
ghost.exe -crc32,action=create
Creates an ASCII CRC32 file from the
primary hard drive. Note that the
default disk is the primary drive. The
default ASCII CRC32 file is Ghost.crc.
ghost.exe -crc32,action=create,src=
2,crcfile=myfile.txt
Creates an ASCII CRC32 file,
Myfile.txt. This example uses disk 2 as
the source drive and the output file.
ghost.exe -crc32,action=verify
Verifies the contents of the primary
disk against a default ASCII CRC32
file, Ghost.crc (in the current
directory). The default disk is the
primary drive. The default
verification list file is Ghost.ls.
ghost.exe -crc32,action=verify,src=
1,crcfile=myfile.txt,vlist=myfile.out
Verifies the contents of the primary
disk, 1, against the CRC32 file,
Myfile.txt. This example Myfile.out as
the verification list file.
ghost.exe -crc32,action=verify,src=
Verifies the contents of the primary
1,crcfile=myfile.txt,vlist=myfile.out,vexcept=my disk against a CRC32 file. Same as
file.exc
above with the inclusion of the
EXCEPTION argument that excludes
compared files based upon its entries.
Files not checked with CRC
The switch vexcept=filename specifies files that are not checked with CRC. This is
normally used to exclude files that are always changed on start up. A sample
exception file follows:
[ghost exclusion list]
\PERSONAL\PHONE
[partition:1]
\WINDOWS\COOKIES\*.*
\WINDOWS\HISTORY\*
\WINDOWS\RECENT\*
\WINDOWS\USER.DAT
\WINDOWS\TEMPOR~1\CACHE1\*
\WINDOWS\TEMPOR~1\CACHE2\*
\WINDOWS\TEMPOR~1\CACHE3\*
Download from Www.Somanuals.com. All Manuals Search And Download.
Command-line switches 175
Ghost.exe and the Virtual Partition
\WINDOWS\TEMPOR~1\CACHE4\*
[partition:2]
*\*.1
[end of list]
The exclusion list is case-sensitive; all files should be specified in upper case. The *
wildcard symbol follows UNIX rules, and is more powerful than the MS-DOS *
wildcard. In particular, it matches the . as well as any other character, but other
characters can follow the *. Therefore a wildcard of *br* matches any files
containing the letters br, such as, Brxyz.txt, Abr.txt, and Abc.dbr.
The specification of \WINDOWS\COOKIES\*.* in the previous example means
match all files in the \WINDOWS\COOKIES subdirectory that have extensions.
To match all files with or without extensions, use WINDOWS\COOKIES\*.
Use short file names in exclusion files. Files specified before the first [Partition:x]
heading are used to match files in any partition.
A directory of * matches any subdirectory, regardless of nesting. The previous
exclusion file matches any file with an extension of .1 in any subdirectory on the
second partition. Apart from this, use wildcards for files, not for directories.
Ghost.exe and the Virtual Partition
Ghost.exe does not see the Virtual Partition when it runs from the command line.
The numbering of the partitions is consistent with the numbering that appears
when you run the Ghost.exe user interface.
If you use GDisk to view the disk, the Virtual Partition is displayed with the
volume label VPSGHBOOT. Therefore, the partition numbering that you can see
in GDisk is not the same as the partition numbering in Ghost.exe.
Download from Www.Somanuals.com. All Manuals Search And Download.
176 Command-line switches
Ghost.exe and the Virtual Partition
Download from Www.Somanuals.com. All Manuals Search And Download.
178 Transfer methods and hardware setup
Transfer and hardware requirements
Transfer and hardware requirements
Before using Norton Ghost, consider the transfer and hardware requirements for
the transfer method that you want to use. Ensure that all hard drives are installed
correctly and that the BIOS of the system is configured and shows the valid
parameters of the drives.
Peer-to-peer connections
Peer-to-peer connections enable Norton Ghost to run on two computers,
copying drives and partitions and using image files between them.
LPT or USB connections
On an LPT/parallel port connection, use a parallel connection cable and a parallel
port to connect the computers. For data transfer of approximately 19-25 MB/
min, Norton Ghost provides support for the Parallel Technologies universal
DirectParallel cable. For peer-to-peer USB port connections, use a USB 1.1 cable
30 MB/min.
ECP is the best option for LPT connections and has a data transfer rate of
approximately 5 MB/min. Norton Ghost must be running under DOS on both
computers.
See “USB and DirectParallel Cables” on page 181.
TCP/IP connections
Connect the computers with an ethernet or token ring network interface card and
an established network connection, which includes one of the following:
■
■
■
■
Crossover cable
Coaxial or twisted pair cable
Ethernet or Token Ring (Network Interface Card)
Ethernet or MSAU hub
Install a network interface card (NIC).
Download from Www.Somanuals.com. All Manuals Search And Download.
Transfer methods and hardware setup 179
SCSI tape drives
SCSI tape drives
To use Norton Ghost with a SCSI tape device, the tape media and the tape device
must have an Advanced SCSI Programming Interface (ASPI) driver for DOS
installed. The driver is installed in the Config.sys file as shown in the following
example:
device=C:\scsitape\aspi4dos.sys
The Norton Ghost wizards automatically attempt to detect and load Adaptec
SCSI cards. If this succeeds you do not need to make any additions to Config.sys.
If Norton Ghost does not detect the SCSI card, you can add the drivers in one of
the following ways:
■
In the Norton Ghost wizards, in the Preferences and Options dialog box, on
the SCSI driver settings tab.
■
In the Norton Ghost wizards, in the Preferences and Options User dialog
box, on the User Files tab. This lets you make an addition to Config.sys.
Refer to the documentation included with the SCSI tape device for more
information.
Removable media
The removable media drive, media, and media drivers for use in DOS are
required.
CD/DVD usage
A CD/DVD writer and blank CD-R/RW or DVD media are required.
See “Image files and CD/DVD writers” on page 112.
Download from Www.Somanuals.com. All Manuals Search And Download.
180 Transfer methods and hardware setup
Internal drives
Internal drives
To work with internal drives, ensure that each of the drives is properly
configured. This means that if fixed IDE drives are in use, then the jumpers on
the drives are set up correctly and the BIOS of the computer is configured for the
disk arrangement. Both the source and the destination drives must be free from
file corruption and physical hard drive defects.
Third-party devices
Install the DOS driver as outlined in the device documentation.
Download from Www.Somanuals.com. All Manuals Search And Download.
182 USB and DirectParallel Cables
Parallel Technologies cables
Parallel Technologies cables
Parallel Technologies USB and DirectParallel® Universal Fast Cable provide
high-speed data transfer and can significantly increase Norton Ghost
performance.
USB and DirectParallel connection cables are available directly from Parallel
Technologies.
Web site
http://www.lpt.com
Telephone
800.789.4784 (U.S.)
425.869.1119 (International)
Fax
253.813.8730
Email
For peer-to-peer connections, Norton Ghost supports USB 1.1 cables and USB
1.1 controller. Some USB 2.0 controllers may work, but Norton Ghost does not
support this configuration.
The USB and DirectParallel connection cables can also be used for high-speed
computer-to-computer file transfer and networking in Windows 9x and
Windows 2000. Norton Ghost contains DirectParallel driver technology from
Parallel Technologies, Inc., the developers of the Direct Cable Connection
computer-to-computer technology built into Windows 9x and Windows 2000.
The DirectParallel drivers and cables contain patent-pending parallel port
interface technology.
Other USB cables
The following USB peer-to-peer cables can also be used with Norton Ghost:
■
■
■
■
■
EzLink USB Instant Network, model 2710
USB LinQ Network
BusLink USB to USB File Transfer cable, model UFT06
USB Net Linq Network Bridge cable, model 2K398
USB Net Linq Network Bridge cable, model 00115G
Download from Www.Somanuals.com. All Manuals Search And Download.
184 The Wattcp.cfg network configuration file
The Wattcp.cfg configuration file
The Wattcp.cfg configuration file
The Wattcp.cfg configuration file contains the TCP/IP networking configuration
details for Norton Ghost.
Wattcp.cfg is created automatically when you create a boot package using the
Ghost Boot Wizard.
The Wattcp.cfg file specifies the IP address and the subnet mask of the computer
and lets you set other optional network parameters. The file should be located in
the current directory when Ghost.exe is started.
Comments in the file start with a semicolon (;). Options are set using the format
option = value. For example:
receive_mode=5 ;set receive mode
Wattcp.cfg key words
The keywords in the Wattcp.cfg configuration file are as follows:
Table D-1
Wattcp.cfg keywords
Keyword
Description
IP
Specifies the IP address of the local computer. Each computer must
have a unique IP address. Norton Ghost supports the use of DHCP
and BOOTP servers and defaults to using them when the IP address
is left blank or is invalid. DHCP and BOOTP provide automatic
assignment of IP addresses to computers. This lets identical boot
disks be used on computers with similar network cards.
Example: IP=192.168.100.10
Netmask
Specifies the network IP subnet mask.
Example: NETMASK=255.255.255.0
Gateway
(optional)
Specifies the IP address of the gateway. This option is required when
routers are present on the network and when participating
computers are located on different subnets.
Example: GATEWAY=192.168.100.1
Bootpto
(optional)
Overrides the timeout value (in seconds) for BOOTP/DHCP.
Example: BOOTPTO=60
Download from Www.Somanuals.com. All Manuals Search And Download.
The Wattcp.cfg network configuration file 185
Wattcp.cfg key words
Table D-1
Keyword
Wattcp.cfg keywords
Description
Receive_Mode
(Ethernet only)
Overrides the automatically configured packet driver mode used by
Norton Ghost. The modes, in order of preference, are 4, 5, and 6.
The default mode is 4.
Download from Www.Somanuals.com. All Manuals Search And Download.
186 The Wattcp.cfg network configuration file
Wattcp.cfg key words
Download from Www.Somanuals.com. All Manuals Search And Download.
188 Cloning with Linux
Supported configurations
Supported configurations
Norton Ghost can copy or clone many different Linux distributions successfully.
However, Norton Ghost is sensitive to any possible changes in Ext2/3 file system
Ghost may no longer support the Linux distribution. Symantec attempts to
release new builds of Ghost promptly to address such changes.
Norton Ghost is not sensitive to kernel versions. Use the -ial and -nolilo
command-line switches to resolve problems with any incompatibilities.
See “Command-line switches” on page 153.
Norton Ghost copies or clones any x86-based Linux system with full support for
Ext2/3 file systems (type 0x83) containing 1 KB, 2 KB, or 4 KB block sizes. Other
file systems, such as reiserfs, are cloned on a sector-by-sector basis and cannot be
resized during cloning.
Linux systems that use LILO as their boot loader in the MBR or in the active
Ext2/3 partition are supported with some exceptions. Any references to a disk
other than the first hard disk in the system (/dev/hda or /dev/sda) are not
supported. The /boot and root file systems must be on the first hard disk. /boot
can be a directory within the root file system.
Norton Ghost supports type 0 and type 1 Linux swap file systems (type 0x82).
Norton Ghost partially supports Linux extended partitions (type 0x85). It copies
file systems inside these extended partitions, but restores them as DOS extended
partitions. This is not known to cause problems with Linux systems after cloning.
Position of disk
Linux is sensitive to the position of the disk in hardware. A system running on the
primary master disk does not run if the disk is mounted as the primary slave or as
the secondary master. Norton Ghost does not resolve this issue.
Boot configuration
Norton Ghost uses the file /etc/lilo.conf to determine the boot configuration. If
this file does not match the boot configuration, Norton Ghost may be unable to
patch LILO during cloning. The keyword, default, is not supported in Lilo.conf,
so the first target specified should be the default target.
Download from Www.Somanuals.com. All Manuals Search And Download.
Cloning with Linux 189
Norton Ghost utility support
If a different boot loader, such as grub, is used, or the preceding conditions are
not met, Norton Ghost clones the system but the new disk probably will not boot.
The system should be started from a floppy disk or CD, and the boot loader
should be reinstalled by running /sbin/lilo or an equivalent.
Warning: Always have a boot disk available in case of problems starting a Linux
system after cloning.
Norton Ghost utility support
Ghost Explorer substantially supports Ext2/3 file systems within image files,
including the restoration, deletion, and addition of files within these file systems.
Problems arise when files that have names that are illegal on Windows are
manipulated. Ghost Explorer cannot manipulate device files or symbolic links.
Sparse files are expanded on restoration, and hard links are broken.
GDisk does not create any Linux file systems or recognize any partitions within a
Linux extended partition.
Download from Www.Somanuals.com. All Manuals Search And Download.
190 Cloning with Linux
Norton Ghost utility support
Download from Www.Somanuals.com. All Manuals Search And Download.
192 Troubleshooting
Ghost.exe error messages
A Norton Ghost error message consists of an error number, a description, and
possibly a suggestion to remedy the problem.
A Ghosterr.txt file is generated when an abort error occurs.
See “Diagnostics” on page 201.
Further information is available on the Norton Ghost Technical Support Web
site.
See “Service and support solutions” on page 209.
Table F-1 includes some error messages that you may encounter.
Table F-1
Error message
Error code
Description
10098
The partition number must be included in the command-line
switches.
See “Command-line switches” on page 153.
10010, 10014,
11000
Incorrect path/file syntax. Ensure that the path and file name are
correct. Also make sure that you have the proper user rights to read
or create the image file.
19913
19916
Cannot find the BOOTP/DHCP server. Ensure that the computer is
connected to the network and that a BOOTP or DHCP server is set
up for this subnet.
is already in use.
CDR101: Not
ready reading
drive X, Abort,
Retry, Fail
A system error message. This error is not caused by Norton Ghost. It
is caused by malfunctioning hardware or software configurations.
The image file on the CD is not readable. To verify this, go into DOS
and copy the image file off of the CD-ROM using copy verification,
copy /v.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting 193
Problems running Norton Ghost
Problems running Norton Ghost
Some errors may occur that do not produce an error code.
Card not found/Card not installed
This error can occur if a driver cannot find a network card installed on your
computer. The error can occur when you start your computer with a Ghost boot
disk or run a task in the Virtual Partition. Check the following:
■
Ensure that you selected the correct network card when you created the
Ghost boot disk.
■
Ensure that the Plug and Play O/S setting in the BIOS does set up Plug and
Play devices.
For example, if the setting in the BIOS is Plug and Play O/S, then the setting
for the BIOS to set up Plug and Play devices is N. Some BIOS phrase this
differently and require the setting to be Y. Try the generic instructions for
accessing the BIOS included in this manual or check your computer manual
for instructions specific to your computer.
This applies only to some cards and some BIOSs.
Creating an image on an NTFS partition
You may experience problems if you are attempting to back up in the following
situation:
■
■
■
You have a dual-boot environment.
You are running Norton Ghost from a Windows 9x partition.
You are trying to create an image in an NTFS partition.
This cannot be achieved because of a known Windows 9x limitation of reading
NTFS partitions.
A workaround for this is to start your computer with a Ghost boot disk and then
run Ghost.exe to complete the backup image.
Cannot start from drive A
If your computer does not check drive A first on startup, use your computer’s
Setup program to change its settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
194 Troubleshooting
Problems running Norton Ghost
Be careful when you make changes using your computer’s Setup program. If you
have never used it before, you may want to refer to your computer
manufacturer’s documentation.
To change your computer’s settings
1
2
3
4
Restart your computer.
A message appears telling you the key or keys to press to run Setup.
Press the key or keys to launch the Setup program.
Set the Boot Sequence to boot drive A first and drive C second.
Setup programs vary from one manufacturer to the next. If you cannot find
the Boot Sequence option, use the Setup program’s Help system, refer to the
documentation that came with your computer, or contact your computer
manufacturer.
5
Save the changes, then exit the Setup program.
Windows NT blue screen
If you are restoring, backing up, or cloning a computer onto another Windows
NT computer with incompatible hardware, you may get a blue screen. To solve
this problem, you must restore the computer with a previous backup image file.
Missing hibernation file
If the hibernation file is missing, the following message may appear:
Cannot hibernate because there is no hibernation file or the hibernation file has
an error.
Recreate the hibernation files according to the instructions for your Windows
operating system.
Computer fails to restart
If your computer fails to restart during a Norton Ghost Virtual Partition
operation, try running the Ghreboot utility included on the Norton Ghost
installation CD.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting 195
Problems running Norton Ghost
To run Ghreboot.exe
To run Ghreboot.exe if you installed Norton SystemWorks
1
2
3
Insert your Windows Startup Disk into the floppy disk drive and restart your
computer.
If you are given a restart choice, then on the boot menu select Boot with CD
Drivers.
When the computer has restarted, type the following:
<drive>:\Ghost\Tools\Ghreboot
<drive> is the drive letter assigned to your CD-ROM drive.
To run Ghreboot.exe if you installed Norton Ghost only
1
Insert your Norton Ghost installation CD into your CD-ROM drive and
restart your computer.
2
When the computer has restarted, type the following:
<drive>:\Tools\Ghreboot
<drive> is the drive letter assigned to your CD-ROM drive.
Getting out of the Virtual Partition
If your computer is in the Virtual Partition, you must use the executable
Ghreboot to restart your computer back into Windows.
To restart your computer back into Windows
1
2
At the command line, type ghreboot.
Press Enter.
Cancelling a Ghost.exe operation
If you start a Ghost.exe operation, you can abort the process by pressing Ctrl+C.
Be aware that this leaves the destination image file in an unknown state.
Installing and uninstalling Norton Ghost
If you are having problems installing or uninstalling Norton Ghost, providing a
log file of the installation or uninstallation assists Technical Support in analyzing
the problem.
Download from Www.Somanuals.com. All Manuals Search And Download.
196 Troubleshooting
Writing to a recordable CD or DVD
Add the following to the end of a command line to create a Logfile.txt file in the
root directory of your computer - /l*v c:\logfile.txt
See “Installing from the command line” on page 207.
To add logging to the end of a command line for Windows NT/2000/XP
installations, use the following command line:
Msiexec.exe /i "d:\install\norton ghost.msi" /q INSTALLDIR="c:\program
files\symantec\norton ghost 2003\" USERNAME="Me"
COMPANYNAME="Symantec" /l*v c:\logfile.txt
Msiexec.exe /x "d:\install\norton ghost.msi" /q /l*v c:\logfile.txt
To add logging to the end of a command line for Windows 9x/Me and XPH
installations, use the following command line:
d:\install\setup.exe /s /v"/l*v c:\logfile.txt"
d:\install\setup /x /s /v"/l*v c:\logfile.txt"
Connecting using USB peer-to-peer
If you cannot connect using USB peer-to-peer, then try altering the drivers that
are installed into the Virtual Partition.
See “Installing USB peer-to-peer drivers” on page 57.
Writing to a recordable CD or DVD
If you are having problems saving a file directly to a CD-R/RW or DVD, there are
a number of possible solutions.
Supported CD-R/RW and DVD drives
Norton Ghost supports a large number of CD-R/RW and DVD drives. Ensure
that your drive is listed on the following support Web site:
http://service1.symantec.com/SUPPORT/ghost.nsf/docid/2002030414141625
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting 197
Writing to a recordable CD or DVD
Inaccessible CD-ROM drive
When writing to a compatible CD-R/RW drive, the drive may not be accessible to
■
Ghosterr.txt: Ghosterr.txt is located in the same directory as the Ghost
executable.
See “Diagnostics” on page 201.
■
Log file: A log file may have been created that can be viewed in the View Log.
See “Viewing the task log” on page 59.
IDE CD-ROM drives
To see if an IDE CD-R/RW drive is inaccessible to Norton Ghost, open
Ghosterr.txt or the log file.
The IDE sections are named one or more of the following:
■
■
■
IDE
IDE for PIO
IDE for UDMA
If the word Unavailable appears under these headings, then check the following:
■
Ensure that the firmware for your CD-R/RW drive is current.
Check the Web site for the CD-R/RW drive manufacturer for the most
current firmware.
■
■
Update the computer BIOS with the latest version.
The computer BIOS may not be enabled to detect the IDE drive.
Check the controller to which the IDE drive is attached.
The IDE drive might be attached to a controller that requires a driver for
access. Check the documentation for the controller to determine whether
you need to load an IDE driver when starting your computer. Drivers may be
needed for controllers that are included on the computer’s motherboard.
Reading and writing from a CD-R/RW drive are different processes. You
may be able to access a CD-R/RW drive from DOS to read the drive, but not
to write to the drive.
SCSI CD-R/RW drives
To see if a SCSI CD-R/RW drive is inaccessible to Norton Ghost, open
Ghosterr.txt or the log file. The SCSI section is named ASPI.
Download from Www.Somanuals.com. All Manuals Search And Download.
198 Troubleshooting
Writing to a recordable CD or DVD
If the word Unavailable appears under the ASPI heading, then check the ASPI
files loaded from Config.sys. The following files must be loaded:
■
■
■
■
aspi2dos.sys
aspi4dos.sys
aspi8dos.sys
aspi8u2.sys
These drivers can be included in a task from the Advanced Settings dialog box in
the Windows wizards.
All SCSI controllers require an ASPI driver. The listed ASPI files are sufficient for
most SCSI controllers. The controller might require a driver that is usually
supplied with the controller. Copy the driver to the bootable floppy disk and edit
Config.sys to load the driver. The contoller’s documentation should include the
correct syntax for loading the driver from DOS. If you do not have the driver,
then contact the controller’s manufacturer.
If the correct ASPI drivers are loaded, then update the computer BIOS and the
controller BIOS with the latest versions.
For example, older versions of the BIOS for the Adaptec 2940 controller card are
not compatible with Norton Ghost.
CD-R/RW disc
The CD disc to which you are writing may have a problem. Check the following:
■
■
■
■
Use an unformatted CD-RW disc.
To write an image to a CD-RW disc that you have already used, use the CD-
RW utility to wipe all information off the disc, including the file system.
Try a second disc.
If you have tried one disc only, then you have not eliminated the possibility
of a damaged disc. Try again, using an unused new disc.
Try a different brand of disc.
Some CD-R/RW drives do not work with low quality discs or specific
manufacture of discs. Use a different brand.
Use a standard 650 MB CD-R/RW disc.
Norton Ghost or the CD-R/RW drive may have problems with high speed
discs or with discs that record more information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting 199
Writing to a recordable CD or DVD
Using the correct boot disk
Do not use the CD/DVD Startup Disk with Ghost boot disk to start a computer
when you intend to save image files to the CD-R/RW drive. If you have started
your computer with a CD/DVD Startup Disk with Ghost boot disk, Norton
Ghost attempts to load the CD-R/RW drivers. Loading unnecessary drivers can
cause problems.
Use a bootable floppy disk that contains the Ghost executable to start your
computer.
Loading CD-R/RW drivers
You do not need to load CD-R/RW drivers when you start your computer.
Ensure that Config.sys and Autoexec.bat on the floppy disk or installed in the
Virtual Partition do not load CD-R/RW driver files.
For example, Cdrom.sys and Mscdex.exe should not be loaded when the
computer starts.
If the CD-R/RW does not appear in the list of destination drives
It can take time for Norton Ghost to identify and list the CD-R/RW drive in the
Destination Drive window. To eliminate this as is a problem, wait five minutes to
see if the drive appears.
Loading Ghost.exe from the floppy disk drive
If you are loading Ghost.exe from a floppy disk, a problem can be resolved by
loading Norton Ghost from the hard drive instead.
For example, if you are creating an image file of the first partition, copy Ghost.exe
to the second partition. Edit Autoexec.bat to start Norton Ghost from the second
partition as follows:
d:\ghost.exe
Do not load Ghost.exe from the partition that is being cloned.
Outdated computer BIOS
Your computer might have an old BIOS version. Try updating the BIOS.
Download from Www.Somanuals.com. All Manuals Search And Download.
200 Troubleshooting
Writing to a recordable CD or DVD
Outdated CD-R/RW drive BIOS
The CD-R/RW drive might have an old BIOS version. An update to the BIOS
often fixes problems. Check the manufacturer’s Web site for an update.
Using PC-DOS or MS-DOS
If you put PC-DOS system files on the boot disk, replace them with MS-DOS
system files. You can choose MS-DOS while creating the boot disk.
See “Providing MS-DOS” on page 89.
High compression
Try using a lower or no compression when creating the image file.
Using third-party software to write to the CD-R/RW disc
If you are unable to write directly to a CD-R/RW disc using Norton Ghost, you
can create the Ghost image and then use third-party software to write to the CD-
R/RW disc.
To write an image to CD using third-party software
1
2
3
Create the Ghost image file and save it to a temporary location.
Collect and edit the other required files.
Use third-party software to save the image file and other required files to the
CD-R/RW disk.
4
Make the CD bootable.
If you use software to write an image file directly to the CD, you may experience
problems when restoring the image file. Software designed to write directly to a
CD, such as Adaptec Direct CD, uses a different file format. Therefore the copied
files are not recognized by Ghost.
If you are writing directly to a CD using third-party software, use a program that
lays out the format of the disc before it writes it, such as Adaptec E-Z CD Creator.
Norton Ghost does not provide technical support for third-party software, but
details on this method can be found in the knowledge base on the Symantec
Support Web site.
Download from Www.Somanuals.com. All Manuals Search And Download.
202 Diagnostics
Hard drive detection and diagnostic information
Hard drive detection and diagnostic information
Norton Ghost can generate diagnostic reports that outline the hard drive devices
detected, other system-related information, and error conditions when they are
detected.
View Log
If you are running tasks from the wizards, a task log may be generated. This can
help in diagnosing problems.
See “Viewing the task log” on page 59.
Abort error file (Ghosterr.txt)
An error message consists of an error number, a description, and possibly a
suggestion of how to remedy the problem.
The Norton Ghost abort error file includes these details along with additional
drive diagnostics and details required to assist Technical Support in diagnosing
the cause of the problem.
The Norton Ghost abort error file is generated when Norton Ghost detects an
erroneous condition that Norton Ghost is unable to recover from or work
around. The Ghosterr.txt file is generated in the current directory. If this location
is read-only, the Ghosterr.txt file output location should be redirected. The
location and file name of the abort file generated by Norton Ghost during an
abort can be altered using the -afile=drive:\path\filename command-line switch.
See “Troubleshooting” on page 191.
Creating a full diagnostic statistics dump summary
A full diagnostic statistics dump summary file contains the detected hard disk
geometry details along with other Norton Ghost statistics. The full Norton Ghost
diagnostic statistics dump can be created using the command-line switch -dd.
The default statistics dump file name is Ghststat.txt. You can alter the location
and file name of a file generated by Norton Ghost by adding the
-dfile=drive:\path\filename command-line switch. For example:
ghost.exe -dd -dfile=c:\diagnose\log.txt
Download from Www.Somanuals.com. All Manuals Search And Download.
Diagnostics 203
Testing TCP/IP functionality
Testing TCP/IP functionality
There are several testing utilities available in the Microsoft TCP/IP application
suite. Examples of the output of two Windows 95 TCP/IP utilities, Ping.exe and
Winipcfg.exe, are included below. On Windows NT/2000/XP, the equivalent
utilities are Ping.exe and Ipconfig.exe.
The Ping.exe utility shows TCP/IP networking response and can be used to show
connectivity between computers. For a mapped network volume connection, a
client can ping the server and vice versa to check that they have basic connectivity
at any time.
Pinging a local host shows basic local TCP/IP functionality. The address used in
the following example identifies the local host on the network.
Pinging a local host
In a Windows DOS prompt dialog box on a Windows 95 computer with a
computer name Win95PC1, the following command is entered:
c:\> ping LocalHost
This gives the following results:
Pinging Win95PC1 [127.0.0.1] with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<10ms TTL=128
Reply from 127.0.0.1: bytes=32 time<10ms TTL=128
Reply from 127.0.0.1: bytes=32 time<10ms TTL=128
Reply from 127.0.0.1: bytes=32 time<10ms TTL=128
This test indicates that the TCP/IP stack is installed and operating.
Download from Www.Somanuals.com. All Manuals Search And Download.
204 Diagnostics
Testing TCP/IP functionality
Download from Www.Somanuals.com. All Manuals Search And Download.
206 Installing Norton Ghost from the command line
Choosing an interface type for installation
Choosing an interface type for installation
Microsoft Windows Installer lets you choose the interface that you see during
installation. If you are installing in Basic or Silent mode, you must run the
installation from the command line. If you are using a Windows 9x or Windows
NT computer, then you must run the installation from a setup file.
The interface modes are as follows:
■
The Full interface mode guides you through a series of dialog boxes to install
Norton Ghost, letting you change settings, such as selecting components and
changing directories. This mode does not require passing parameters from
the command line.
■
The Basic interface mode shows a progress bar and any system level error
messages. If you alter any default settings, you must pass this information
through as parameters from the command line. The syntax for this
installation is as follows:
msiexec /i “c:\temp\Norton Ghost.msi” /qb
■
The Silent interface mode does not show any dialog boxes or error messages.
If you alter any default settings, you must pass this information through as
parameters from the command line. To install Norton Ghost, the syntax is as
follows:
msiexec /i "c:\temp\Norton Ghost.msi" /q
Choosing an installation mode
Microsoft Windows Installer lets you choose the way you install Norton Ghost.
Unless you choose a Normal installation, run the installation from the command
line. The installation modes are as follows:
■
■
The Normal installation mode provides dialog boxes to guide you through
installation. It lets you install Norton Ghost on the target computer by
selecting the location and the required components.
The Administrative installation mode installs the entire installation package
to a network location. All installation files are copied from the CD to the
specified location.This lets users with access to the network location to install
Norton Ghost from this location. This installation requires administrative
privileges. The syntax for this installation is as follows:
msiexec /a “c:\temp\Norton Ghost.msi”
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Norton Ghost from the command line 207
Installing from the command line
■
The Repair installation lets you repair the current installation. It is accessed
once Norton Ghost is installed on your computer. You can activate this by
clicking Add/Remove Programs in the Control Panel and clicking Ghost. You
can also run this mode from the command line. The syntax is as follows:
msiexec /f “c:\temp\Norton Ghost.msi”
The switch /fa reinstalls all files, /fu rewrites all required user registry entries,
and /fs overwrites any existing shortcuts.
Installing from the command line
You can specify parameters when installing Norton Ghost from the command
line by setting installer packages. The syntax for these packages is as follows:
msiexec /i “c:\temp\Norton Ghost.msi” /q PROPERTY = VALUE
The property name must be in upper case, and the value is case-sensitive.
On Windows 2000/XP computers, Msiexec.exe is in the path by default, so it can
be called from any directory. On Windows NT computers with Installer V2
installed, Msiexec.exe is in the path by default. On Windows 9x computers,
Msiexec.exe is not in the path. It is always located in the Windows\System
directory on Windows 9x systems, and in Winnt\System32 on Windows NT
systems.
If you are not running Windows XP and you do not have Windows Installer V2
installed, then the installation must be performed through a setup file. Setup.exe
is located in the same directory as Norton Ghost.msi.
If you are installing in Administration mode, you do not need to set these
properties as you are copying the installation package to a location on the
network. Set these properties once you run the installation from the network
location.
Table H-1 shows the package properties that can be set from the command line.
Table H-1
Package properties
Property
Default value
Description
INSTALLDIR
Program
Destination directory
files\Symantec\Ghost
USERNAME
Registered user
User name
COMPANYNAME
Registered company
Company name
Download from Www.Somanuals.com. All Manuals Search And Download.
208 Installing Norton Ghost from the command line
Uninstalling from the command line
Table H-2 contains the switches that can be used with Setup.exe.
Table H-2
Setup.exe switches
Switch
Description
/s
/a
/s
/x
Runs installation in Silent installation mode
Runs installation in Administrative installation mode
Runs installation in Silent installation mode
Uninstalls the application
The /v switch is used to pass the parameters to the installation. All of the
parameters must be enclosed in quotation marks and the opening quotation
mark must immediately follow the /v switch. Any other quotation marks must be
preceded by a backslash.
The following command line installs Norton Ghost in a specified folder,
registering Norton Ghost with the user name in silent mode:
setup.exe /v"USERNAME=\"Me\" INSTALLDIR=\"c:\temp\" /qn"
Uninstalling from the command line
You can uninstall Norton Ghost from the command line using Microsoft
Installer.
To uninstall Norton Ghost from the command line
◆
In DOS, type the following command:
Msiexec /x "<path to msi package> \Norton Ghost.msi”
[/q or /qb]
The switches /q and /qb are optional.
See “Installing from the command line” on page 207.
Download from Www.Somanuals.com. All Manuals Search And Download.
Support
Service and support
solutions
Service and support information is available from the Help system of your
Symantec product. Click the Service and Support topic in the Help index.
Technical support
Symantec offers two technical support options:
■
Online Service and Support
Connect to the Symantec Service & Support Web site at
http://service.symantec.com, select your user type, and then select your
product and version. This gives you access to current hot topics, knowledge
bases, file download pages, multimedia tutorials, contact options, and more.
■
PriorityCare telephone support
PriorityCare fee-based telephone support services are available to all
registered customers. You can access the PriorityCare number for your
product through the Service & Support Web site. You’ll be led through the
online options first, and then to the telephone contact options available for
your product and version.
Support for old and discontinued versions
When a new version of this software is released, registered users will receive
upgrade information in the mail. Telephone support will be provided for the old
version for up to twelve months after the release of the new version. Technical
information may still be available through the Service & Support Web site (http:/
/service.symantec.com).
Download from Www.Somanuals.com. All Manuals Search And Download.
210 Service and support solutions
Customer service
When Symantec announces that a product will no longer be marketed or sold,
telephone support will be discontinued 60 days later. Support will be available for
discontinued products from the Service & Support Web site only.
Customer service
Access customer service options through the Service & Support Web site at http:/
/service.symantec.com. From this site, you can receive assistance with non-
technical questions, and for information on how to do the following:
■
■
■
■
■
■
■
■
Subscribe to the Symantec Support Solution of your choice.
Obtain product literature or trialware.
Locate resellers and consultants in your area.
Replace missing or defective CD-ROMS, disks, manuals, and so on.
Update your product registration with address or name changes.
Get order, return, or rebate status information.
Access customer service FAQs.
Post a question to a Customer Service representative.
For upgrade orders, visit the online upgrade center at:
http://www.symantecstore.com
Worldwide service and support
Technical support and customer service solutions vary by country. For
information on Symantec and International Partner locations outside of the
United States, please contact one of the service and support offices listed below,
or connect to http://service.symantec.com and select your region under the
Global Service and Support.
Download from Www.Somanuals.com. All Manuals Search And Download.
Service and support solutions 211
Worldwide service and support
Service and support offices
North America
Symantec Corporation
555 International Way
Springfield, OR 97477
U.S.A.
http://www.symantec.com/
Argentina and Uruguay
Symantec Region Sur
Cerrito 1054 - Piso 9
1010 Buenos Aires
Argentina
http://www.service.symantec.com/mx
+54 (11) 5382-3802
Asia/Pacific Ring
Symantec Australia
Level 2, 1 Julius Avenue
North Ryde, NSW 2113
Sydney
http://www.symantec.com/region/reg_ap/
+61 (2) 8879-1000
Fax: +61 (2) 8879-1001
Australia
Brazil
Symantec Brasil
Market Place Tower
Av. Dr. Chucri Zaidan, 920
12° andar
http://www.service.symantec.com/br
+55 (11) 5189-6300
Fax: +55 (11) 5189-6210
São Paulo - SP
CEP: 04583-904
Brasil, SA
Europe, Middle East, and
Africa
Symantec Customer Service
Center
http://www.symantec.com/region/reg_eu/
+353 (1) 811 8032
P.O. Box 5689
Dublin 15
Ireland
Download from Www.Somanuals.com. All Manuals Search And Download.
212 Service and support solutions
Subscription policy
Mexico
Symantec Mexico
http://www.service.symantec.com/mx
+52 (5) 661-6120
Blvd Adolfo Ruiz Cortines,
No. 3642 Piso 14
Col. Jardines del Pedregal
Ciudad de México, D.F.
C.P. 01900
México
Other Latin America
Symantec Corporation
9100 South Dadeland Blvd.
Suite 1810
http://www.service.symantec.com/mx
Miami, FL 33156
U.S.A.
Subscription policy
If your Symantec product includes virus, firewall, or web content protection, you
might be entitled to receive protection updates via LiveUpdate. The length of the
subscription could vary by Symantec product.
When you near the end of your subscription, you will be prompted to subscribe
when you start LiveUpdate. Simply follow the instructions on the screen. After
your initial subscription ends, you must renew your subscription before you can
update your virus, firewall, or web content protection. Without these updates,
your vulnerability to attack increases. Renewal subscriptions are available for a
nominal charge.
Every effort has been made to ensure the accuracy of this information. However,
the information contained herein is subject to change without notice. Symantec
Corporation reserves the right for such change without prior notice.
January 15, 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
boot disk
A disk that contains the Norton Ghost executable and any necessary drivers.
You start a computer from the boot disk and start Norton Ghost to perform
a cloning operation. Any drivers required to run supported hardware can be
saved onto the boot disk.
cloning
Creating a replica of a specified hard disk of a computer.
command line
create
The direct DOS interface that lets you type commands to be executed.
To copy the contents of a hard disk or partition to an image file. This
includes the disk system area (for example, the partition table) and the data
contents. To create an image file of a computer. In Norton Ghost, this
equates to the terms backup and dump.
DHCP
Dynamic Host Configuration Protocol. This program is used on client-
server networks, as opposed to peer-to-peer networks. When a network uses
DHCP, the network includes a DHCP server that automatically assigns IP
addresses to computers on the network as needed. Each time that a
computer disconnects from the network and then reconnects, the DHCP
server assigns a new IP address. Most client-server networks have either a
DHCP server or a Bootp server. Bootp is a program that performs the same
function as DHCP. When a computer is not on a network, or the network
does not have a DHCP server or similar server, then the computer uses a
static IP address. The computer static IP address does not change until is it
changed manually. A static IP address is retained during a system restart.
DOS
Disk Operating System. DOS can be run from within Windows from a
command shell, but you cannot run Norton Ghost from a command shell.
A Windows 9x computer can be restarted into DOS. Windows NT/Me/XP/
2000 computers cannot be restarted into DOS except with the use of a boot
disk containing DOS.
dump
See create.
dynamic disk
A proprietary disk partitioning structure used by Microsoft Windows 2000/
XP. Dynamic disks can be created and deleted within the operating system
without having to reboot. Dynamic disks cannot be accessed by other
operating systems.
Download from Www.Somanuals.com. All Manuals Search And Download.
214 Glossary
external mass storage device
A device that is attached to your computer with a network or cable. that is
capable of storing large amounts of data. For example, a hard disk attached
to a computer with a USB or FireWire cable.
hard disk
image file
A physical disk in your computer or attached as a external device.
A file created using Norton Ghost. An image file of a disk or partition is
created and is used to create exact duplicates of the original disk or
partition.
IP address
Internet Protocol Address. This term refers to a number that uniquely
identifies a computer on a network or on the Internet. IP addresses for
computers on a client-server network might change daily or more often.
The address for a computer must be unique within a network.
load
See restore.
native copy
Copies only the disk structure information and the files, rather than all
sectors on the disk. In addition, on FAT partitions, native cloning saves the
files contiguously. That is, when you write the image to the destination
drive, the files are no longer fragmented.
NIC
Network Interface Card. The NIC is a physical device inside a computer
which coordinates communications between the computer and a network
partition
A divided part of a hard disk. An operating system sees a partition as a
separate disk if it recognizes the file system.
primary partition
A hard disk can contain up to four primary partitions, or up to three
primary partitions and one extended partition. Most hard disks have this
partitioning structure.
restore
Overwrite all existing data on a computer either with an image file or
directly with a copy of another computer. To write information to a disk or
partition. In Norton Ghost, this equates to the term load.
sector copy
Virtual Partition
A copy of an entire disk, including the boot track, all sectors, and
unpartitioned space. A sector copy does not filter extraneous or erroneous
information from the boot track.
A partition that is created when you perform a backup, restore, clone, or
other Norton Ghost operation from Windows. The Ghost operation is
performed from the Virtual Partition.
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
creating 72, 74
Symbols
? switch 158
PC-DOS 73
setup 72
A
bootcd switch 155
abort log 155, 192, 202
abort operation 195
advanced options 46
afile=filename switch 155
ASPI driver 157, 158, 161, 164, 179
auto switch 155
Autoexec.bat 56
automation
assign a drive letter 47
drive letter 47
clone switch and examples 166, 170-172
close on completion 158
quiet mode 162
restart on completion 162
CD writers 112, 113
back up to 113
supported 112
B
back up
CD-ROM 179
opening 29
to a CD-R/RW 113
backup
support 81
Cdrom.sys 199
chkimg,filename switch 155
Ghost.exe 97, 99
Norton Ghost 36
Backup Wizard 17, 36
bad sectors 155, 158
batch switch 155
bfc=x switch 155
BIOS 159, 193, 199
blue screen 194
boot
compression 63
Ghost.exe 104
speed 62, 63
switch 155, 166
Windows 2000 68
clone switch 155
Clone Wizard 17, 39
cns switch 155
command line 47
examples 170-174
text file 154
menu 138
sector 158
track 158
Download from Www.Somanuals.com. All Manuals Search And Download.
216 Index
compression 62, 63, 97, 200
computer
restarting in Windows 58
DVD
writing to 112
computer identification
details 147
dynamic disks 68
Config.sys 56
conversion
E
file system 157
copy command 166
CRC 157
F
CRC32 switch 63, 157, 172
creating
FAT clusters 155
fatlimit switch 157
partition 131
file system
D
data checking 63
data compression 62
dd switch 156
defaults 46
FAT12 118
deleting, partitions 135
DHCP 54
diagnostics 202-203
disaster recovery warning 48
disk
Windows NT 135, 157
conversion from FAT16 157
NTFS 156, 161
backup 36
clone 39
dynamic 68
large 142
marking 94
partition 193
resizing 157
fingerprint 36, 37, 39, 158
FireWire drivers 54
firmware 197
fns switch 158
restore 37
status 133
DOS 200
boot disk 73
IBM DOS 73
MS-DOS 73, 89
PC-DOS 89
version 49
drive letters
fx switch 158
mapping 54
drive, large 64
drivers 53
dst switch 169
dump
command 166
log file 156
Download from Www.Somanuals.com. All Manuals Search And Download.
IDE hard disk 157
G
GDisk 128
batch mode 134
large hard disks 142
switches 129-141
description 159
naming 160
password 46
spanned 160
GDisk32 128
modifying boot menu 138
Ghost Boot Wizard 17
starting 74
writing to a CD 112
Ghost Explorer 22
command line 123
switches 123
Ghost Walker 146
command line 148
switches 148
Ghost.exe 22, 92
cancelling 195
verifying 58
crc. See CRC32
creating 65, 104
insufficient space 65
description 159
extracting 120
file list 121
integrity 155
loading 65
lock 160
modification 120
multisegment 155, 163
password 161
starting 59
Ghost.exe operation 94
Ghosterr.txt. See abort log
Ghreboot.exe 57, 58
restart
GoBack 67
H
h switch 158
hard disk
standard 63
active 129
batch 129
creating 129
information window 48
INT13 support 158
deleting 129, 135
entire copy 159
hiding partitions 129
large drives 142
MBR 129
volume 161
number of 157
space 158
status 129
integrity check 51, 58
internal drives 180
wiping 135
hibernation file 69, 194
hiding partitions 137
J
jl x=filename switch 159
I
ia switch 158
Download from Www.Somanuals.com. All Manuals Search And Download.
218 Index
L
large drives 64
LILO boot loader 161
Linux 93, 105, 118, 132, 158
load command 166
lockinfo switch 159
locktype=type switch 160
log file 59, 155
lpm switch 160
lps switch 160
P
parallel port transfer
automation 160, 165
setup 95
LPT
drivers 55
port 79, 178
partition 128
backup 36
cloning 39, 106
cloning mirrored 161
creating 131, 158
extended 157
M
map a drive 47
map a drive letter 47
mapping network drives 47, 82
master mode 95, 164
MBR 161
hiding 137
reinitializing 130
memcheck switch 160
mode switch 166
Mscdex.exe 199
uninstalling 90
restore 37
size 164
status 133
password 46, 145, 146, 161
PC-DOS 49, 89, 200
pcopy command 166
pdump command 166
peer-to-peer 55, 95
connections 178
TCP/IP 54
performance network 63
multicast 79
N
network drives, mapping 82
network, performance 63
noauto switch 160
nofile switch 160
nolilo switch 161
Norton Ghost
disk cloning 104
from image file 102
to disk 105
adding command-line switches 47
display options 48
fingerprint 158
to image file 98
partition cloning 106
from image file 103
to image file 99
to partition 106
pwd, -pwd=x switch 161
starting 34
starting from Virtual Partition 57
noscsi switch 161
ntchkdsk switch 161
NTFS See file system
ntic switch 161
Download from Www.Somanuals.com. All Manuals Search And Download.
Q
quiet switch 162
tape block size 164
R
tapebsize switch 164
tapebuffered switch 164
tapeeject switch 164
tapesafe switch 164
tapespeed=x switch 164
tapeunbuffered switch 164
task log 59
RAID 68, 161
rb switch 162
rebooting 195
restore
Ghost.exe 101, 103
TCP/IP 79, 164, 165, 178
drivers 54
S
peer-to-peer 95
tcpm switch 164
script switch 162
SCSI 161
Technical Support 209
tray icon 48
drivers 53, 157, 158
Adaptec 77
tape
drives 66
setup 179
switches 164
SID 147
sector, bad 155, 158, 165
sector-by-sector copy 158
Service and Support 209
setup 180
drivers 54
See also SCSI tape
signature bytes 157
skip=x switch 163
skipping files 69
slave mode 95, 165
source switch 167
span switch 163
spanning 64-65, 68
avoiding user prompt 155
list of drives to search 157
naming 155, 160
override 161
peer-to-peer 95
port 178
vdw switch 165
ver switch 165
verify 165
to a CD-R/RW 113
split=x switch 163
starting in 57
vexcept switch 174
Virtual Partition 15, 49, 52, 57, 193, 195
volume integrity 161
sure switch 163
swap files 69
sze switch 170
Download from Www.Somanuals.com. All Manuals Search And Download.
220 Index
W
Windows
2000 68
boot menu 138
running Ghost.exe 94
wiping
disks 135
partitions 135
writing to a CD-R/RW 112, 113
Z
z switch 165
Download from Www.Somanuals.com. All Manuals Search And Download.
Norton Ghost™
CD Replacement Form
CD REPLACEMENT: After your 60-Day Limited Warranty, if your CD becomes unusable, fill out and return 1) this form, 2)
your damaged CD, and 3) your payment (see pricing below, add sales tax if applicable), to the address below to receive
replacement CD. DURING THE 60-DAY LIMITED WARRANTY PERIOD, THIS SERVICE IS FREE. You must be a registered
customer in order to receive CD replacements.
FOR CD REPLACEMENT
Please send me: ___ CD Replacement
Name __________________________________________________________________________________________________
Company Name __________________________________________________________________________________________
Street Address (No P.O. Boxes, Please)_________________________________________________________________________
City_________________________________________________________ State _______ Zip/Postal Code _________________
Country* ___________________________________________Daytime Phone _______________________________________
Software Purchase Date ____________________________________________________________________________________
*This offer limited to U.S., Canada, and Mexico. Outside North America, contact your local Symantec office or distributor.
Briefly describe the problem: ________________________________________________________________________________
SALES TAX TABLE: AZ (5%), CA (7.25%), CO (3%), CT (6%), DC (5.75%), FL (6%), GA (4%), IA (5%),
CD Replacement Price
Sales Tax (See Table)
Shipping & Handling
$ 10.00
______
IL (6.25%), IN (5%), KS (4.9%), LA (4%), MA (5%), MD (5%), ME (6%), MI (6%), MN (6.5%), MO
(4.225%), NC (6%), NJ (6%), NY (4%), OH (5%), OK (4.5%), PA (6%), SC (5%), TN (6%), TX (6.25%),
VA (4.5%), WA (6.5%), WI (5%). Please add local sales tax (as well as state sales tax) in AZ, CA, FL, GA,
MO, NY, OH, OK, SC, TN, TX, WA, WI.
$
9.95
TOTAL DUE
______
FORM OF PAYMENT ** (CHECK ONE):
___ Check (Payable to Symantec) Amount Enclosed $ _________
__ Visa
__ Mastercard __ AMEX
Credit Card Number _____________________________________________________________________ Expires __________
Name on Card (please print) ____________________________________ Signature ___________________________________
**U.S. Dollars. Payment must be made in U.S. dollars drawn on a U.S. bank.
MAIL YOUR CD REPLACEMENT ORDER TO:
Symantec Corporation
Attention: Order Processing
555 International Way
Springfield, OR 97477 (800) 441-7234
Please allow 2-3 weeks for delivery within the U.S.
Symantec and Norton Ghost are trademarks of Symantec Corporation.
Other brands and products are trademarks of their respective holder/s.
© 2002 Symantec Corporation. All rights reserved. Printed in the U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|