StarTechcom Doll ST12MHDDCRP User Manual

HDMI® Over CAT5/6 Repeater for  
ST12MHDDC  
ST12MHDDCRP  
*actual product may vary from photos  
DE: Bedienungsanleitung - de.startech.com  
FR: Guide de l'utilisateur - fr.startech.com  
ES: Guía del usuario - es.startech.com  
IT: Guida per l'uso - it.startech.com  
NL: Gebruiksaanwijzing - nl.startech.com  
PT: Guia do usuário - pt.startech.com  
Manual Revision: 01/16/2013  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Introduction............................................................................................1  
Packaging Contents ................................................................................................................................. 1  
System Requirements.............................................................................................................................. 1  
Preparing Your Site ................................................................................................................................... 4  
Hardware Installation .............................................................................................................................. 5  
Specifications..........................................................................................7  
Technical Support ..................................................................................8  
Warranty Information............................................................................8  
Instruction Manual  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
The ST12MHDDCRP HDMI® to CAT5 Repeater works with the ST12MHDDC HDMI®  
Extender Kit to add additional displays and extend the HDMI® over Cat 5/6 signal. With  
2 RJ45 outputs per unit, each repeater allows you to add a display, and also daisy-chain  
the signal to 2 additional ST12MHDDCRP repeaters (sold separately) at up to 330 feet  
(100 meters) at each level.  
Additional repeaters can be added at any time, up to a maximum of 30 broadcasting  
levels to over 100 displays - allowing for a highly scalable installation that can be used  
with existing network cable for a cost-effective and flexible extension. Each repeater  
includes mounting hardware for a clean and professional installation. Plus, because  
the HDMI® signal is extended over standard Cat5/Cat6 Ethernet cable with RJ45  
connectors, proprietary cables aren’t necessary which eliminates both expense and the  
hassle of running specialized cable.  
Ideal for High-Definition applications, the HDMI® over UTP extender supports 1080p  
video resolutions, 7.1 digital audio and features built-in EDID monitor emulation,  
which ensures native resolution and maximum compatibility with your display or  
projector, for a convenient plug-and-play installation.  
Backed by a StarTech.com 2-year warranty and free lifetime technical support.  
Packaging Contents  
HDMI® Repeater  
Power Adapter  
Instruction Manual  
Foot Pad Set  
System Requirements  
ST12MHDDC HDMI® Extender Kit  
HDMI® enabled display device(s) One for each Repeater (i.e. television, projector)  
Available AC electrical outlet for transmitter, receiver and optional repeaters  
HDMI® cable for each display  
Instruction Manual  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
ST12MHDDCRP Repeater Unit  
Front View of Repeater  
Back View of Repeater  
1. HDMI® Out  
1. Power jack  
2. Power Status LED  
3. Link Status LED  
4. EDID Copy Button  
2. HDMI® Out Link #1 (RJ-45 Connector)  
3. HDMI® Out Link #2 (RJ-45 Connector)  
4. HDMI® In Link (RJ-45 Connector)  
ST12MHDDC HDMI Extender Kit (Sold Separately)  
Transmitter Unit  
Front View of Transmitter  
Back View of Transmitter  
1. Power Jack  
1. HDMI® IN  
2. HDMI® Out Link (RJ-45 Connector)  
2. Power Status LED  
3. Link Status LED  
Instruction Manual  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Receiver Unit  
Front View of Receiver  
Back View of Receiver  
1. Power Jack  
1. HDMI® IN  
2. HDMI® Out Link (RJ-45 Connector)  
2. Power Status LED  
3. Link Status LED  
Instruction Manual  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparing Your Site  
NOTE: This device will only work with the ST12MHDDC HDMI Extender kit. Please  
review site preparation steps from the ST12MHDDC manual prior to installing  
additional Repeaters.  
1. Determine where the Repeater/Display will be installed in relation to the  
ST12MHDDC HDMI Extender kit (sold separately) and place/mount the display  
appropriately.  
2. (Optional) If using additional repeater unit(s) (sold separately), determine where  
the remote display(s) will be located in relation to this repeater/display and place/  
mount the display(s) appropriately. Repeaters allow for an additional 330 ft. (100  
meters) of Cat5/6 between each device. The Repeater(s) must be situated between  
the ST121MHDDC extender and the receiver, as the receiver portion does not have  
an RJ-45 out port to continue the chain.  
NOTE: Ensure the Repeater Unit(s) are situated near an available AC electrical outlet.  
Make sure all devices are turned off before beginning installation.  
Instruction Manual  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hardware Installation  
NOTE: This device will only work with the ST12MHDDC HDMI® Extender kit. Please  
review the Hardware Installation steps from the ST12MHDDC manual prior to installing  
additional Repeaters.  
1. Install RJ-45 terminated Cat5/6 Ethernet Cable  
a) Connect an RJ-45 terminated Cat5/6 Ethernet cable to the HDMI® Out Link (RJ-45  
Connector) on the local Unit (Transmitter or Repeater).  
NOTE: If you are using surface cabling, ensure you have enough Category 5/6  
unshielded twisted pair (UTP) network cabling to connect the Transmitter Unit to  
the Remote Unit’s (Repeater/Receiver) location, and that each end is terminated  
with a RJ45 connector. The cabling should not go through any networking  
equipment (i.e. router, switch).  
OR  
If you are using premises cabling, ensure that the Category 5/6 unshielded  
twisted pair (UTP) network cabling between the Host Unit and the  
Remote Unit has been properly terminated in a wall outlet in each location and  
there is a patch cable long enough to connect the Remote Unit and the Host Unit  
to their respective outlets. The cabling should not go through any networking  
equipment (i.e. router, switch).  
b) Connect the other end of the Cat5/6 cable run to the RJ45 connector on the  
Repeater unit.  
c) (optional) When adding multiple repeaters, a run of Cat 5/6 cable will be  
required from and to each device.  
2. Install Repeater Unit(s)  
a) Position the Repeater Unit near the video display (i.e. television, projector) within  
330 ft. (100 meters) from the level up device be it the initial transmitter or  
another repeater.  
b) Connect the video source to the HDMI® Out on the Repeater Unit using an  
HDMI® cable.  
c) Connect the Cat5/6 cable positioned in Step 1 to the”HDMI® In Link (RJ-45  
Connector)on the Repeater. Connect the Repeater Unit power supply. The  
Power LED will light, and LINK LED will turn on after a successful connection  
between both units is established. This may take several seconds.  
Instruction Manual  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE: These steps can be repeated at each level when adding additional Repeaters up  
to 30 levels. Each Repeater has two HDMI® out Links (RJ-45 Connectors) allowing for  
the same signal to go in 2 different directions at each level.  
3. Install Receiver Unit  
d) Position the Receiver Unit near the video display (i.e. television, projector) within  
330 ft. (100 meters) from the level up device be it the initial transmitter or  
another repeater.  
e) Connect the video source to the HDMI® out on the Receiver Unit using an  
HDMI® cable.  
f) Connect the provided Receiver Unit power supply. The Power LED will light,  
and Link LED will turn on after a successful connection between both units is  
established. This may take several seconds.  
NOTE: The ST12MHDDC receiver (sold separately) should only be used as the last  
device in the chain as it does not have an HDMI® out port (RJ-45 Connector).  
4. Your source video image will now appear on the Repeater unit(s) attached  
video display.  
Instruction Manual  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Input Connectors  
1x RJ-45 Female  
1x RJ-45 Female  
Output Connectors  
1x HDMI (19 pin) Female  
Max Distance  
100 m / 330 ft  
Maximum Digital Resolutions  
1920x1200 @60Hz  
1920 x 1200  
1920 x 1080  
1600 x 1200  
Supported Resolutions  
Wide Screen Supported  
Audio Specifications  
Input Voltage  
Yes  
7.1 Surround Sound  
100~240V  
0.4 A A  
Input Current  
Output Voltage  
5 AC V  
Power Adapter  
Output Current  
2 A A  
Center Tip  
Polarity  
Positive  
M
Plug Type  
Instruction Manual  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Support  
StarTech.com’s lifetime technical support is an integral part of our commitment to  
provide industry-leading solutions. If you ever need help with your product, visit  
www.startech.com/support and access our comprehensive selection of online tools,  
documentation, and downloads.  
For the latest drivers/software, please visit www.startech.com/downloads  
Warranty Information  
This product is backed by a two year warranty.  
In addition, StarTech.com warrants its products against defects in materials  
and workmanship for the periods noted, following the initial date of purchase.  
During this period, the products may be returned for repair, or replacement with  
equivalent products at our discretion. The warranty covers parts and labor costs only.  
StarTech.com does not warrant its products from defects or damages arising from  
misuse, abuse, alteration, or normal wear and tear.  
Limitation of Liability  
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their  
officers, directors, employees or agents) for any damages (whether direct or indirect,  
special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business,  
or any pecuniary loss, arising out of or related to the use of the product exceed the  
actual price paid for the product. Some states do not allow the exclusion or limitation  
of incidental or consequential damages. If such laws apply, the limitations or exclusions  
contained in this statement may not apply to you.  
Instruction Manual  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise.  
StarTech.com is your one-stop source for every connectivity part you need. From  
the latest technology to legacy products — and all the parts that bridge the old and  
new — we can help you find the parts that connect your solutions.  
We make it easy to locate the parts, and we quickly deliver them wherever they need  
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to  
the products you need in no time.  
to access exclusive resources and time-saving tools.  
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology  
parts. StarTech.com was founded in 1985 and has operations in the United States,  
Canada, the United Kingdom and Taiwan servicing a worldwide market.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp Calculator EL 1801C User Manual
Soleus Air Air Conditioner PH5S SERIES User Manual
Sony Car Stereo System D E400AN User Manual
Sony Security Camera DF70P User Manual
Sony Stereo System STR DE898 User Manual
SPX Cooling Technologies Humidifier MD 08F User Manual
Star Micronics Printer TSP400Z User Manual
Sunbeam Hot Beverage Maker KE4500 User Manual
Sunbeam Major Appliances Refrigerator Compact Refrigerators
SUPER MICRO Computer Server 6025B UR User Manual