Install “RM-AX5000 Custom
Setup Tool” to your Windows
PC.
Start “RM-AX5000 Custom
Setup Tool and register a
Component.”
Sync the Remote Commander with this Wizard setting.
Integrated Remote Commander
1
3
RM-AX5000
Operating Instructions
“RM-AX5000 Custom Setup Tool”
Quick Start Guide
Owner’s Record
The model number is located on the rear of the unit and the serial number
is located in the battery compartment.
Record the serial number in the space provided below. Refer to them
whenever you call upon your Sony dealer regarding this product.
Model number : RM-AX5000
Serial number :
© 2008 Sony Corporation Printed in Malaysia
Complete the installation by following the on-screen instructions.
Contents
• Remote Commander
“RM-AX5000”
• Rear Cover
• Battery Charging
Stand “BCA-RMAX5K”
Disconnect the Remote
Commander.
Start
4
Set up your Component by following the simple on-screen instructions.
Below are the main steps you will go through to set up your Remote
Commander.
• Ni-MH Rechargeable
Battery Pack
• AC Power Adaptor
• USB Cable
Let’s try using the Remote
Select “First Setup Wizard.”
Commander!
5
(e.g.) To operate a TV which has just been set up.
• CD-ROM
• Quick Start Guide
• Warranty Card
Press the “POWER”button
to turn the TV on.
Installing the battery
Press the Label button “TV.”
Insert the connector with the Ni-MH
Rechargeable Battery Pack into the
Remote Commander.
Be sure to match the direction of the
connector.
Connect the Remote
Commander to your PC.
2
Attach and slide the Rear Cover.
Be sure to match the direction of the Rear
Cover. Align the bottom of the Rear Cover
to the Attaching line.
CHARGE
OPEN
Press the “OTHER”button.
HARGE
E
P
O
Attaching line
Specify the Model number in the “Configure”window.
CHARGE
OPEN
Press the Label buttons
or Hardware buttons for
desired operations.
to your PC
Charging the battery
CHARGE
OPEN
Connect the AC Power Adaptor
plug directly to the DC IN 6 V jack
on the Remote Commander. Then
connect the AC Power Adaptor to a
wall outlet.
DC IN 6 V jack
CHARGE indicator
CHARGE
OPEN
Charging starts when the CHARGE
indicator in the top of the display is lit.
AC Power Adaptor
plug
USB Cable
AC Adaptor
(to a wall outlet)
Charging is completed when the CHARGE indicator turns off. Disconnect
the AC Power adaptor. Then slide to close the Rear Cover.
Download from Www.Somanuals.com. All Manuals Search And Download.
|