Sony Tablet Accessory BSC10 User Manual

User guide  
®
Bluetooth Speaker with  
Magnetic Charging Pad  
BSC10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
The BSC10 Bluetooth® Speaker with Magnetic Charging Pad accessory lets you  
charge your Xperia™ device and enjoy high-quality audio at the same time. The  
BSC10 accessory holds your Xperia™ device in such a way that you can easily  
browse content and interact with the device while it’s charging to, for example,  
answer incoming calls or send emails. You don’t even need to open the USB cover.  
So you can sit back and watch your favourite movies or listen to music from your  
Xperia™ device.  
Overview  
1
2
3
4
5
6
7
8
9
NFC detection area  
Speaker  
Attachment (fits into charging dock)  
Microphone  
Power button/Bluetooth pairing button  
Handsfree button  
Magnetic charging connector  
Volume down button  
Volume up button  
10 Audio input socket  
11 DC power input socket  
12 Attachment eject button  
13 Power/Bluetooth notification light  
Notification light status  
Flashing slowly  
Flashing rapidly  
Steady blue light  
The BSC10 accessory is searching for previously connected devices to pair with  
Pairing mode – The BSC10 accessory is ready to pair with an Xperia™ device  
The BSC10 accessory is paired with an Xperia™ device  
Steady white light An audio-in cable is connected  
When several devices are available for pairing, the BSC10 accessory tries to pair with the  
most recently connected device.  
3
This is an Internet version of this publication. © Print only for private use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the attachments  
Your BSC10 accessory comes with three attachments of different width. Each  
attachment can fit into the charging dock and hold the relevant tablet or phone in  
place after you insert it. At purchase, the attachment that fits the Xperia™ Z2 Tablet  
or Xperia™ Z Ultra is inserted. If your Xperia™ device is not one of these models, you  
may need to remove the attachment and replace it with one of the other two  
attachments.  
Attachment name  
Compatible device  
BSC10A  
Xperia™ Z3 Tablet Compact  
Xperia™ Z2 Tablet  
Xperia™ Z Ultra  
BSC10B  
Xperia™ Z2  
Xperia™ Z1  
Xperia™ Z1 Compact  
Xperia™ ZL2  
BSC10C (for devices with protective cases fitted)  
Xperia™ Z Ultra  
Xperia™ Z2  
Xperia™ Z1  
Xperia™ Z1 Compact  
Xperia™ ZL2  
To change the attachment  
1
2
Press the attachment eject button and remove the attachment that is already in  
the device.  
Place another attachment in the charging dock. The attachment makes a  
locking noise when it fits into place correctly.  
4
This is an Internet version of this publication. © Print only for private use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Charging  
To use your BSC10 accessory as a charger  
1
2
Insert the required attachment into the BSC10 accessory.  
Place your Xperia™ device into the charging dock of the BSC10 accessory.  
You should hear a locking sound when the Xperia™ device fits correctly into  
place.  
3
Connect the accessory to a power source.  
5
This is an Internet version of this publication. © Print only for private use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Before you can use your BSC10 accessory with an Xperia™ device, for example, to  
play music or handle incoming calls, you must first pair the two devices. You can pair  
your BSC10 accessory with an Xperia™ device using either the Bluetooth® or NFC  
functions. Once the devices are paired, your BSC10 accessory automatically  
establishes a connection with the Xperia™ device.  
To pair the BSC10 accessory with an Xperia™ device using NFC  
1
On the Xperia™ device, make sure that the NFC function is turned on and that  
the screen is active and unlocked.  
2
3
Turn on the BSC10 accessory.  
Position your Xperia™ device in such a way that the NFC detection area of  
each device touches the other.  
To pair the BSC10 accesory with an Xperia™ device using Bluetooth®  
1
2
Xperia™ device: Make sure the Bluetooth® function is turned on.  
BSC10 accessory: Press and hold down the Bluetooth pairing button until you  
hear a beep and a blue notification light flashes rapidly.  
Xperia™ device: Search for and connect to the BSC10 accessory. When the  
accessory is successfully paired with the Xperia™ device, the notification light  
turns solid blue.  
3
To use the BSC10 accessory to answer incoming calls  
1
2
Make sure the BSC10 accessory is paired with an Xperia™ device that  
supports call handling.  
When a call comes in, press  
.
Please note that the calling function and call button is not supported for internet voice calls.  
To use the BSC10 accessory to listen to music  
1
2
Make sure the BSC10 accessory is paired with an Xperia™ device.  
Play the audio or video file on the Xperia™ device. The sound is automatically  
played through the speakers of the paired BSC10 accessory.  
6
This is an Internet version of this publication. © Print only for private use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disconnecting and reconnecting  
There are several ways to disconnect your Xperia™ device from or reconnect it with  
the BSC10 accessory:  
On the Xperia™ device, deselect or select BSC10 in the list of paired Bluetooth®  
devices.  
Place the Xperia™ device over the BSC10 accessory so that the NFC detection area  
of each device touches the other.  
Press the Bluetooth pairing button.  
7
This is an Internet version of this publication. © Print only for private use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Legal information  
SONY BSC10  
Prior to use, please read the Important information leaflet separately provided.  
This User guide is published by Sony Mobile Communications AB or its local affiliated company, without any  
warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of  
current information, or improvements to programs and/or equipment, may be made by Sony Mobile  
Communications AB at any time and without notice. Such changes will, however, be incorporated into new  
editions of this User guide.  
All rights reserved.  
©Sony Mobile Communications AB, 2014  
Interoperability and compatibility among Bluetooth® devices varies. Device generally supports products  
utilizing Bluetooth spec. 1.2 or higher, and Headset or Handsfree profile.  
Sony is the trademark or registered trademark of Sony Corporation. Bluetooth is the trademark of the  
Bluetooth (SIG) Inc. and is used under license. All other marks are the property of their respective owners. All  
rights reserved.  
All product and company names mentioned herein are the trademarks or registered trademarks of their  
respective owners. Any rights not expressly granted herein are reserved. All other trademarks are property of  
their respective owners.  
Visit www.sonymobile.com for more information.  
All illustrations are for illustration only and may not accurately depict the actual accessory.  
DECLARATION OF CONFORMITY FOR BSC10  
We, Sony Mobile Communications AB of  
Nya Vattentornet  
SE-221 88 Lund, Sweden  
declare under our sole responsibility that our product  
Sony type RD-0110, VGP-AC19V75 and VGP-AC19V76  
to which this declaration relates is in conformity with the appropriate standards EN  
300 328:V1.8.1, EN301 489-7:V1.3.1, EN 301 489-17:V2.2.1, EN 301 489-3:V1.6.1  
and EN 60 950-1:2006 +A11:2009 +A1:2010 +A12:2011 following the provisions of,  
Radio Equipment and Telecommunication Terminal Equipment directive 1999/5/EC.  
Lund, April 2014  
Pär Thuresson,  
Quality Officer, SVP, Quality & Customer Services  
FCC Statement  
This device complies with Part 15 of the FCC rules. Operation is subject to the following two  
conditions: (1) This device may not cause harmful interference, and (2) This device must  
accept any interference received, including interference that may cause undesired operation.  
Any change or modification not expressly approved by Sony may void the user's authority to operate the  
equipment.  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee that interference will not occur in a particular  
installation.  
If this equipment does cause harmful interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of  
the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
8
This is an Internet version of this publication. © Print only for private use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AVISO IMPORTANTE PARA MÉXICO  
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o  
dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier  
interferencia, incluyendo la que pueda causar su operación no deseada.  
Para consultar la información relacionada al número del certificado, refiérase a la etiqueta del empaque y/o del  
producto.  
Industry Canada Statement  
This device complies with RSS-210 of Industry Canada.  
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this  
device must accept any interference, including interference that may cause undesired operation of the device.  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
Avis d’industrie Canada  
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de  
licence.  
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et,  
and (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est  
susceptible d'en compromettre le fonctionnement.  
9
This is an Internet version of this publication. © Print only for private use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sennheiser Microphone MKH 8050 User Manual
Shiro Telephone SC3130 User Manual
Sony Camera Accessories 57 User Manual
Sony Cassette Player FX323 User Manual
Sony Clock Radio ICF C215L User Manual
Sony Computer Monitor KLV 32M1 User Manual
Sony Fax Machine FAX B140 User Manual
Sony Portable Speaker SA F11 User Manual
Sony Robotics ERF 210 User Manual
Southbend Lathe SB1037F User Manual