4-077-171-11(1)
Color Rear Video Projector
Operating Instructions
KP-43T75
KP-48S75
KP-53S75
KP-53N77
KP-61S75
© 2000 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Ge t t in g t o kn o w t h e b u t t o n s o n t h e
re m o t e co n t ro l
POWER
(pages 20, 48, 49)
MUTING
In the instructions that follow, we will
refer to the buttons on your remote control.
Keep this flap unfolded and use this page
for reference.
(page 20)
FUNCTION
(pages 20, 48, 49)
MUTING
DVD/
VTR
SAT/
POWER
TV
Names of the buttons on the remote control are
presented in different colors to represent the
available functions.
CABLE
SYSTEM OFF
(page 22)
FUNCTION
PIP operation
buttons
SYSTEM
OFF
DVD/VTR SAT/CABLE
TV
VCR/DVD/MDP
operation buttons
(page 48)
TV/VTR
FREEZE
SWAP
PIP
(page 23)
Button color
m
N
M
POSITION AUDIO ACTIVE
TV/VIDEO
(pages 21, 23)
Transparent .... Press to select the component
you want to control; e.g. VTR
(VCR)/ MDP/ DVD Player,
SAT (satellite receiver)/
CABLE, or projection TV.
Green ............... Buttons relevant to power
operations, like turning the
projection TV, SAT/ CABLE, or
VTR (VCR)/ MDP/ DVD Player
on or off
X
z
x
SLEEP
ANT
TV/VIDEO
SLEEP (page 22)
PICTURE MODE (pages 20, 26)
CC (page 22)
PICTURE
MODE
CC
MTS/SAP DISPLAY
ANT (page 24)
DISPLAY
1
2
3
6
(page 21)
5
8
0
4
0 – 9 buttons
MTS/SAP
(pages 22, 27)
7
9
(page 20)
JUMP
ENTER
JUMP (page 21)
ENTER (page 20)
INDEX
GUIDE
(pages 22, 27)/
INDEX (for SAT, page 49)
GUIDE (page 49)
V/v/B/b and
RESET
MENU
Label color
White ............... TV/ VTR (VCR)/ MDP/ DVD
Player/ SAT (satellite
receiver)/ CABLE operation
buttons
Yellow .............. PIP operation buttons
Blue .................. SAT operation buttons
Green ............... S-Link operation buttons
Pink .................. DVD Player operation buttons
buttons
RESET
VOL
CH
(page 25)
(pages 23, 26, 27)
MENU (page 25)
CH +/– (page 20)
VOL +/– (page 20)
CODE SET
CODE SET
(pages 47, 49)
TV
For a detailed explanation of most buttons, see
“Watching the TV” on page 20.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Connecting a DTV (digital television)
receiver ............................................. 13
Connecting a camcorder ..................... 13
Connecting two VCRs for tape
editing ............................................... 14
Connecting a DVD Player .................. 15
Connecting a DVD Player with
Welcome! ........................................ 1
Using This Manual .......................... 1
Precautions ...................................... 2
Important Safeguards .................... 3
Adjusting Your SET UP (menus)... 25
Learning Menu Selection .......................... 25
Using the Video Menu ......................... 26
Using the Audio Menu ........................ 27
Using the Timer Menu ........................ 29
ch
Using the Channel Set Up Menu ...... 30
component video output
Installing and Connecting the
Projection TV....................... 7
connectors ........................................ 15
Connecting an audio system ............. 16
Connecting a Sony SAVA series
Setting and Selecting Favorite Channel.. 32
Using the Set Up Menu ...................... 34
Using the Parental Control Feature ......... 36
Carrying Your Projection TV ...................... 7
Installing the Projection TV ........................ 7
Connector Types .......................................... 8
Making Connections ................................... 8
speaker system ................................ 17
Activating the Parental Control
Feature .............................................. 36
Selecting a Custom Rating
in U.S.A............................................. 38
Selecting a Custom Rating
Basic Set Up ................................... 18
Using the Remote Control ........................ 18
Connecting directly to a cable or an
antenna ............................................... 8
Cable or antenna .................................... 9
Cable and antenna ................................. 9
Connecting a cable box ......................... 9
Cable box and cable .............................. 9
Connecting a cable TV system/
Setting Up the Projection TV
Automatically ................................... 18
in Canada ......................................... 41
Changing the Password ..................... 42
What the Ratings Mean ............................ 43
Adjusting the Convergence Automatically
(FLASH FOCUS) .............................. 19
Ratings in U.S.A................................... 43
Ratings in Canada ............................... 45
Using Your New Projection TV .... 20
antenna to a VCR ............................ 10
Connecting a VCR and projection TV
to a cable box ................................... 10
Connecting a satellite receiver (SAT) 11
Connecting a satellite receiver (SAT)
and a VCR ........................................ 12
Watching the TV ........................................ 20
Watching Two Programs at One Time
— PIP ................................................. 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using This Manual
Welcome!
We recommend that you carefully review
the contents of the following four sections in
the order provided to ensure that you fully
understand the operation of your new
projection TV.
Thank you for purchasing the Sony Color
Rear Video Projection TV.
Operating Video Equipment ........... 47
Setting the Manufacturer's Code ................ 47
This manual is for models KP-43T75, KP-
48S75, KP-53S75, KP-53N77, KP-61S75.
Operating a Cable Box or Satellite
Receiver (SAT) ...................... 49
1 Installing and Connecting the Projection
TV
Model KP-53S75 is used for illustration
purposes.
Setting the Manufacturer's Code ................ 49
This section guides you through your
initial set up. It shows you how to install
your projection TV, to connect your new
components and to connect to the
antenna and cable.
The features you will enjoy include:
Troubleshooting .............................. 50
Specifications ................................... 52
Index .............................................. 53
•
FLASH FOCUS, allowing you to adjust
convergence automatically.
•
Parental Control, enabling you to block
programs that you feel are unsuitable for
your children.
2 Basic Set Up
This section teaches you the basic skills
needed to operate your new projection
TV, including Auto Set Up. It shows you
how to operate the remote control’s
special functions.
•
•
Picture-in-Picture (PIP), allowing you to
view another TV channel, video or cable
image as a window picture.
3 Using Your New Projection TV
This section shows you how to begin
using your new projection TV. It shows
you how to use your remote control’s
features.
Favorite Channel, allowing you to
view and choose from eight of your
favorite channels
Ow ner’s Record
•
•
Y/ PB/ PR inputs for DVD Player and DTV
receiver connections.
The model and serial numbers are located at the rear of
the projection TV, below the Sony logo, on the sticker,
and also on the TV box (w hite label). Record these
numbers in the spaces provided below . Refer to them
w henever you call upon your Sony dealer regarding this
product.
4 Adjusting Your Set Up (menus)
This section teaches you how to access
on-screen menus and adjust your
projection TV’s settings.
Three AUDIO/ VIDEO/ S VIDEO inputs.
Instructions in this manual are written for the remote
control. Similar controls may be found on the projection
TV console.
Model No.
Serial No.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Sa fe t y
In st a llin g
No t e o n cle a n in g
•
Operate the projection TV only on 120 V
AC.
•
•
To prevent internal heat buildup, do not
block the ventilation openings.
Clean the cabinet of the projection TV with a
dry soft cloth. To remove dust from the
screen, wipe it gently with a soft cloth.
Stubborn stains may be removed with a cloth
slightly dampened with solution of mild
soap and warm water. Never use strong
solvents such as thinner or benzine for
cleaning.
•
The plug is designed, for safety purposes,
to fit into the wall outlet only one way. If
you are unable to insert the plug fully
into the outlet, contact your dealer.
Do not install the projection TV in a hot
or humid place, or in a place subject to
excessive dust or mechanical vibration.
•
•
Avoid operating the projection TV at
temperatures below 5° C (41° F).
•
•
If any liquid or solid object should fall
inside the cabinet, unplug the projection
TV immediately and have it checked by
qualified service personnel before
operating it further.
If the projection TV is transported
directly from a cold to a warm location,
or if the room temperature changes
suddenly, the picture may be blurred or
show poor color. In this case, please wait
a few hours to let the moisture evaporate
before turning on the projection TV.
If the picture becomes dark after using the
projection TV for a long period of time, it
may be necessary to clean the inside of the
projection TV. Consult qualified service
personnel.
If you will not be using the projection TV
for several days, disconnect the power by
pulling the plug itself. Never pull on the
cord.
•
To obtain the best picture, do not expose
the screen to direct illumination or direct
sunlight. It is recommended to use spot
lighting directed down from the ceiling
or to cover the windows that face the
screen with opaque drapery. It is
desirable to install the projection TV in a
room where the floor and walls are not of
a reflective material.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safeguards
For your protection, please read these
Gro u n d in g o r Po la riza t io n
Ove rlo a d in g
instructions completely, and keep this
manual for future reference.
This set is equipped with a polarized AC
power cord plug (a plug having one blade
wider than the other), or with a three-wire
grounding type plug (a plug having a third
pin for grounding).
Do not overload wall
outlets, extension cords or
convenience receptacles
beyond their capacity,
since this can result in fire
or electric shock.
Carefully observe and comply with all
warnings, cautions and instructions placed
on the set, or described in the operating
instructions or service manual.
Follow the instructions below:
Fo r t h e se t w it h a
p o la rize d AC p o w e r
co rd p lu g
Always turn the set off
when it is not to be used.
When the set is left
WARNING
To guard against injury, the following basic
safety precautions should be observed in the
installation, use, and servicing of the set.
unattended and unused
for long periods of time,
unplug it from the wall
outlet as a precaution
against the possibility of
an internal malfunction
that could create a fire
hazard.
This plug will fit into the power outlet only
one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet,
try reversing the plug. If the plug should still
fail to fit, contact your electrician to have a
suitable outlet installed. Do not defeat the
safety purpose of the polarized plug by
forcing it in.
Use
Po w e r So u rce s
This set should be
operated only from the
type of power source
indicated on the serial/
model plate.
Ob je ct a n d Liq u id
En t ry
Alt e rn a t e Wa rn in g
Fo r t h e se t w it h a
t h re e -w ire g ro u n d in g
t yp e AC p lu g
If you are not sure of the type of electrical
power supplied to your home, consult your
dealer or local power company. For those
sets designed to operate from battery power,
refer to the operating instructions.
Never push objects of any
kind into the set through
the cabinet slots as they
This plug will only fit into a grounding-type
power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet,
contact your electrician to have a suitable
outlet installed. Do not defeat the safety
purpose of the grounding plug.
may touch dangerous
voltage points or short out
parts that could result in a
fire or electric shock.
Never spill liquid of any kind on the set.
(continued)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safeguards (continued)
Ve n t ila t io n
At t a ch m e n t s
In st a lla t io n
The slots and openings in the cabinet and in
the back or bottom are provided for
necessary ventilation. To ensure reliable
operation of the set, and to protect it from
overheating, these slots and openings must
never be blocked or covered.
Do not use attachments
not recommended by the
manufacturer, as they
may cause hazards.
Wa t e r a n d Mo ist u re
Do not use power-line
operated sets near
water— for example, near
a bathtub, washbowl,
kitchen sink, or laundry
tub, in a wet basement or
near a swimming pool,
etc.
Cle a n in g
- Never cover the slots
and openings with a cloth
or other materials.
Unplug the set from the
wall outlet before
cleaning or polishing it.
Do not use liquid cleaners
or aerosol cleaners. Use a
cloth lightly dampened
with water for cleaning
the exterior of the set.
Acce sso rie s
Do not place the set on an
unstable cart, stand, table
or shelf. The set may fall,
causing serious injury to a
child or an adult, and
- Never block the slots
and openings by placing
the set on a bed, sofa, rug
or other similar surface.
If a snapping or popping
sound from a projection
TV set is continuous or
frequent while the
projection TV is
operating, unplug the
projection TV and consult
your dealer or service
serious damage to the set.
- Never place the set in a
confined space, such as a
bookcase, or built-in
cabinet unless proper
ventilation is provided.
Use only a cart or stand recommended by the
manufacturer for the specific model of
projection TV.
An appliance and cart
combination should be
moved with care. Quick
stops, excessive force, and
uneven surfaces may
cause the appliance and
cart combination to
overturn.
- Do not place the set near
or over a radiator or heat
register, or where it is
exposed to direct
technician.
It is normal for some projection TV sets to
make occasional snapping or popping
sounds, particularly when being turned on or
sunlight.
off.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Lig h t n in g
Po w e r-Co rd
Pro t e ct io n
Section 810 of the National Electrical Code
(NEC) in USA and Section 54 of the
For added protection for this television
receiver during a lightning storm, or when it
is left unattended and unused for long
periods of time, unplug it from the wall
outlet and disconnect the antenna. This will
prevent damage to the receiver due to
lightning and power-line surges.
Canadian Electrical Code in Canada provides
information with respect to proper
Do not allow anything to
rest on or roll over the
power cord, and do not
place the set where the
power cord is subject to
wear or abuse.
grounding of the mast and supporting
structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding
conductors, location of antenna discharge
unit, connection to grounding electrodes, and
requirements for the grounding electrode.
An t e n n a s
Se rvice
Ou t d o o r An t e n n a Gro u n d in g — If an
outdoor antenna is installed, follow the
precautions below.
Da m a g e Re q u irin g Se rvice
An t e n n a Gro u n d in g Acco rd in g t o t h e
NEC — Refer to section 54-300 of Canadian
Electrical Code for Antenna Grounding.
Unplug the set from the wall outlet and refer
servicing to qualified service personnel
under the following conditions:
An outdoor antenna system should not be
located in the vicinity of overhead power
lines or other electric light or power circuits,
or where it can come in contact with such
power lines or circuits.
Antenna lead-in
w ire
- When the power cord or
plug is damaged or
frayed.
Ground clamp
Antenna discharge
unit (NEC Section
810-20)
WHEN INSTALLING AN OUTDOOR
ANTENNA SYSTEM, EXTREME CARE
SHOULD BE TAKEN TO KEEP FROM
CONTACTING SUCH POWER LINES OR
CIRCUITS AS CONTACT WITH THEM IS
ALMOST INVARIABLY FATAL.
Grounding
conductors (NEC
Section 810-21)
- If liquid has been spilled
into the set.
Ground clamps
Electric service
equipment
Pow er service grounding
electrode system (NEC
Art 250 Part H)
Be sure the antenna system is grounded so as
to provide some protection against voltage
surges and built-up static charges.
NEC: National
Electrical Code
(continued)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safeguards (continued)
When the set reaches the
end of its useful life,
improper disposal could
result in a picture tube
implosion. Ask a
qualified service
technician to dispose of
the set.
Se rvicin g
- If the set has been
exposed to rain or water.
Do not attempt to service
the set yourself since
opening the cabinet may
expose you to dangerous
voltage or other hazards.
Refer all servicing to
qualified service
- If the set has been
subject to excessive shock
by being dropped, or the
cabinet has been
personnel.
damaged.
Re p la ce m e n t Pa rt s
When replacement parts are required, be
sure the service technician certifies in writing
that he has used replacement parts specified
by the manufacturer that have the same
characteristics as the original parts.
- If the set does not
operate normally when
following the operating
instructions. Adjust only
those controls that are
specified in the operating
instructions.
Unauthorized substitutions may result in
fire, electric shock, or other hazards.
Improper adjustment of
other controls may result
in damage and will often
require extensive work by
a qualified technician to
restore the set to normal
operation.
Sa fe t y Ch e ck
Upon completion of any
service or repairs to the
set, ask the service
technician to perform
routine safety checks (as
specified by the
- When the set exhibits a distinct change in
performance—this indicates a need for
service.
manufacturer) to
determine that the set is
in safe operating
condition, and to so
certify.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the Projection TV
Re co m m e n d e d vie w in g a re a
(Ve rt ica l)
Ca rryin g Yo u r Pro je ct io n TV
In st a llin g t h e Pro je ct io n TV
Carrying the projection TV requires three or
more people.
Re co m m e n d e d vie w in g a re a
(Ho rizo n t a l)
min. 2.4m (approx. 8 ft.)
min. 2.1m (app. 7 ft.)
min. 1.8m (approx. 6 ft.)
Fo r KP-48S75/53S75/53N77/61S75
61"
The projection TV has been equipped with
casters for easy movement on a hard surface.
Please move your projection TV using the
casters.
min. 1.5m (approx. 5 ft.)
53"
48"
43"
60°
60°
20°
20°
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the Projection TV (continued)
CONTROL S ca b le
Ma kin g Co n n e ct io n s
Co n n e ct o r Typ e s
Sony cable for CONTROL S connection. This
feature is exclusive to Sony products and
allow greater control of all Sony equipment.
You may find it necessary to use some of the
following connector types during set up.
Co n n e ct in g d ire ct ly t o a ca b le o r
a n a n t e n n a
Co a xia l ca b le
Standard TV cable and antenna cable
The connection you choose will depend on
the cable found in your home. Newer homes
will be equipped with standard coaxial cable
(see A); older homes will probably have 300-
ohm twin lead cable (see B); still other
homes may contain both (see C).
Push into connection.
Plug Type
Ab o u t t h e CONTROL S OUT ja ck
Push into connection.
Screw-on Type
To control other Sony equipment with the
projection TV’s remote control, connect the
CONTROL S IN jack of the equipment to the
CONTROL S OUT jack on the projection TV
with the CONTROL S cable.
Screw into connection.
Use 75-ohm coaxial cable for improved
picture quality (see A).
S Vid e o ca b le
High quality video cable for enhanced
picture quality
(Rear of
projection TV)
VHF/UHF
A
75-ohm
coaxial cable
(Rear of projection TV)
• VHF only
Align guides and
push into connection.
or
AUX
• VHF/UHF
or
• Cable
TO
CONVERTER
Au d io /Vid e o ca b le
IN
VIDEO 1
VIDEO 3
Push into connection.
VHF/UHF
OUT
(Rear of
projection TV)
VHF/UHF
B
S
VIDEO
VIDEO
MONITOR AUDIO
(VAR/FIX)
CONTROL S
OUT
Video - Yellow
Audio (Left) - White
Audio (Right) - Red
Y
VIDEO
300-ohm tw in
lead cable
• VHF only
or
L
L
PB
(MONO)
(MONO)
AUDIO
R
AUDIO
R
CONTROL
OUT
S
PR
• UHF only
or
COMPONENT
Some DVD Players and DTV Receivers are
equipped with the following three video
connectors.
• VHF/UHF
Antenna connector
Y - Green
PB (CB, Cb or B–Y) - Blue
PR (CR, Cr or R–Y) - Red
8
Download from Www.Somanuals.com. All Manuals Search And Download.
(Rear of projection TV)
AUX
C
Ca b le b o x a n d ca b le
75-ohm coaxial cable
Coaxial cable
(Rear of
projection TV)
VHF/UHF
Some pay cable TV systems use scrambled or
encoded signals requiring a cable box* only for
certain channels (e.g. HBO, SHOWTIME, etc.)
• VHF
and
TO CONVERTER
(No connection “TO
CONVERTER” in this case)
VHF/UHF
*Cable box
Antenna cable
(Rear of projection TV)
EAC-66 U/V mixer
(not supplied)
AUX
• UHF
Select Cable or ANT mode by pressing ANT
on the remote control.
Scrambled
300-ohm tw in lead cable
TO CONVERTER
channels
Ca b le o r a n t e n n a
Co n n e ct in g a ca b le b o x
75-ohm coaxial cable
(not supplied)
(Signal)
VHF/UHF
This is the simplest connection. Connection is
made directly from the cable or antenna to
the projection TV.
Some pay cable TV systems use scrambled or
encoded signals that require a cable box* to
view all channels.
CATV cable
(unscrambled channels)
(Rear of projection TV)
Also, set “Cable” to “On” in the Channel Set
Up menu (page 31).
VHF/UHF
Coaxial cable
For this set up, you can switch between
scrambled channels (through your cable
box), and normal (CATV) channels by
pressing ANT on your remote control.
(Rear of projection TV)
VHF/UHF
Coaxial cable
Ca b le a n d a n t e n n a
You may find it convenient to use the
following set up if your cable provider does
not feature local channels that you are able to
receive using an antenna.
No t e s:
•
You may be able to program your Sony
remote control to operate your cable box.
(see “Operating a Cable Box or Satellite
Receiver (SAT)” on page 49)
IN
OUT
*Cable box
•
During PIP or Favorite Channel viewing,
the AUX input can only be viewed in the
main picture.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the Projection TV (continued)
Disconnect all pow er sources before making any connections.
(Rear of projection TV)
Co n n e ct in g a ca b le TV syst e m /
a n t e n n a t o a VCR
AUX
1 Attach the coaxial cable from the
incoming cable connection or antenna to
VHF/ UHF IN on the VCR.
TO
CONVERTER
Coaxial cable
IN
VIDEO 1
VIDEO 3
VHF/UHF
2
OUT
S
VIDEO
VIDEO
MONITOR AUDIO
(VAR/FIX)
2 Using a coaxial cable, connect VHF/ UHF
OUT on the VCR to VHF/ UHF on the
projection TV.
S VIDEO
VCR
AUDIO
R
AUDIO
L
VIDEO
Y
VIDEO
LINE
IN
VHF/UHF
OUT
L
L
P
B
R
(MONO)
(MONO)
AUDIO
R
AUDIO
R
LINE
OUT
IN
P
Cable/
Antenna
3 Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
AUDIO Right**).
COMPONENT
1
VIDEO
VMC-810S/820S
(not supplied)
S VIDEO
AUDIO-L
AUDIO-R
YC-15V/30V
(not supplied)
3
(Rear of projection TV)
Co n n e ct in g a VCR a n d p ro je ct io n
TV t o a ca b le b o x
Coaxial cable
AUX
1
1 Connect the single (input) jack of the
splitter to the incoming cable connection,
and connect the other two (output) jacks
(using the coaxial cable) to IN on the cable
box and VHF/ UHF on the projection TV.
Cable/
Antenna
TO
CONVERTER
IN
Splitter (not supplied)
VIDEO 1
VIDEO 3
VHF/UHF
OUT
S
VIDEO
VIDEO
MONITOR AUDIO
(VAR/FIX)
S
VIDEO
AUDIO
R
AUDIO
L
VIDEO
VCR
LINE
IN
Y
VIDEO
VHF/UHF
OUT
L
2 Using a coaxial cable, connect OUT on the
2
L
P
B
R
(MONO)
(MONO)
LINE
OUT
IN
AUDIO
R
AUDIO
R
cable box to VHF/ UHF IN on the VCR.
P
COMPONENT
3 Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
OUT
IN
VIDEO
AUDIO-L
AUDIO-R
VMC-810S/820S
(not supplied)
S VIDEO
Cable box
YC-15V/30V
(not supplied)
3
AUDIO Right**).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Disconnect all pow er sources before making any connections.
No t e :
To view scrambled channels through the
•
cable box, select the video input which the
cable box is connected to by pressing TV/
VIDEO.
* If your VCR is not equipped with S VIDEO, use a
VIDEO cable (yellow) instead of the S VIDEO
cable.
** If you are connecting a monaural VCR, connect
only the single audio output to the left (MONO)
input on the projection TV.
(Rear of projection TV)
Co n n e ct in g a sa t e llit e re ce ive r
(SAT)
Cable/
Antenna
Satellite antenna
cable
AUX
1 Connect the cable from the satellite
TO
CONVERTER
2
1
antenna to the satellite receiver.
IN
VIDEO 3
VIDEO 1
2 Attach the coaxial cable from the incoming
cable connection or antenna to VHF/ UHF
on the projection TV.
VHF/UHF
OUT
S
VIDEO
VIDEO
MONITOR AUDIO
(VAR/FIX)
SAT
Y
VIDEO
SATELLITE IN
LINE OUT
VHF/UHF
AUDIO
R
AUDIO
L
VIDEO
L
S
VIDEO IN
L
P
B
R
(MONO)
(MONO)
OUT
AUDIO
R
AUDIO
R
3 Using AUDIO and S VIDEO cables,
connect AUDIO and S VIDEO OUT on the
satellite receiver to AUDIO and S VIDEO
IN on the projection TV (White-AUDIO
Left, Red-AUDIO Right).
P
COMPONENT
S VIDEO
AUDIO-L
AUDIO-R
RK-74A (not supplied)
3
No t e :
•
To view input from the satellite receiver,
select the video input which the satellite
receiver is connected to by pressing TV/
VIDEO on the remote control.
YC-15V/30V (not supplied)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the Projection TV (continued)
Disconnect all pow er sources before making any connections.
Co n n e ct in g a sa t e llit e re ce ive r
(SAT) a n d a VCR
1 Connect the cable from the satellite
(Rear of projection TV)
antenna to the satellite receiver.
Coaxial cable
3
AUX
2 Attach the coaxial cable from the
incoming cable connection or antenna to
VHF/ UHF IN on the VCR.
SAT
TO
SATELLITE IN
CONVERTER
VHF/UHF
AUDIO
R
AUDIO
L
VIDEO
S
VIDEO
OUT
IN
IN
VIDEO 3
LINE
OUT
VIDEO 1
VHF/UHF
3 Using a coaxial cable, connect VHF/ UHF
OUT on the VCR to VHF/ UHF on the
projection TV.
OUT
S
VIDEO
VIDEO
MONITOR AUDIO
(VAR/FIX)
1
Y
VIDEO
L
L
Satellite
antenna
cable
VMC-810S/
820S (not
supplied)
PB
(MONO)
(MONO)
AUDIO
R
AUDIO
R
4 Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
satellite receiver to AUDIO and S VIDEO
IN on the VCR.
PR
YC-15V/
30V
(not
supplied)
COMPONENT
4
VIDEO
AUDIO-L
AUDIO-R
S VIDEO
5 Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
AUDIO Right).
S VDEO
AUDO
R
AUDO
L
VIDEO
LINE
IN
VHF/UHF
OUT
LINE
OUT
IN
VCR
5
2
VMC-810S/820S (not supplied)
* If your VCR is not equipped with S VIDEO, use a
VIDEO cable (yellow) instead of the S VIDEO
cable.
Cable/
Antenna
No t e :
YC-15V/30V (not supplied)
•
To view input from the satellite receiver or
VCR, select the video input which your
satellite receiver or VCR is connected to
by pressing TV/ VIDEO on the remote
control.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Disconnect all pow er sources before making any connections.
Co n n e ct in g a DTV (d ig it a l t e le visio n ) re ce ive r
Before connecting, be sure to read the Operating
Instructions of the DTV receiver.
YC-15V/30V (not supplied)
S VIDEO
(Rear of projection TV)
1 Attach the coaxial cable from the roof
antenna to VHF/ UHF IN (DTV) on the DTV
receiver.
2 Using AUDIO and S VIDEO cables, connect
AUDIO and S VIDEO OUT on the DTV
receiver to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
2
AUX
DTV receiver
TO
CONVERTER
VIDEO
1
2
3
VHF/UHF IN
Y
ACCESS CARD
IN
VIDEO 3
S VIDEO
DIGITAL
AUDIO
OUT
VHF/UHF IN (DTV)
SATELLITE IN
VDEO 1
PB
L
VHF/UHF
OUT
(OPTICAL)
MOO
S
VIDEO
VIDEO
MONITOR AUDIO
(VAR/FIX)
PR
R
VHF/SATELLITE
OUT
VCR
CONTROL
UDIO
AUDIO/VIDEO OUT
TEL LINE
LOW SPEED DATA
VGA OUT
AUDIO Right).
Y
VIDEO
L
L
PB
No t e :
(MONO)
(MONO)
AUDIO
R
AUDIO
R
1
•
If your DTV receiver supports 480i signal
from YPBPR, you can connect Y, PB and PR of
VIDEO OUT on the DTV receiver to Y, PB
and PR of VIDEO 3 IN on the projection TV
using VIDEO cables.
PR
COMPONENT
Roof antenna
2
AUDIO-R
AUDIO-L
RK-74A (not supplied)
Co n n e ct in g a ca m co rd e r
Use this connection to view a picture directly
from your camcorder.
YC-15V/30V (not supplied)
1 Using AUDIO and S VIDEO* cables, connect
AUDIO and S VIDEO OUT on the camcorder
to AUDIO and S VIDEO IN inside the drop-
down panel on the front of the projection TV
(White-AUDIO Left, Red-AUDIO Right**).
Audio/
video
outputs
VMC-810S/820S
(not supplied)
S VIDEO
OUT
VIDEO
2 Press VIDEO 2 to select the video inputs
S VIDEO
AUDIO-L
AUDIO-R
from a camcorder.
* If your camcorder is not equipped with S VIDEO,
use a VIDEO cable (yellow) instead of the S VIDEO
cable.
VIDEO
L
AUDIO
R
S
VIDEO
(MONO)
VIDEO 2 INPUT
** If you are connecting a monaural camcorder,
connect only the single audio output to the left
(MONO) input on the projection TV.
(Front of projection TV)
Download from Www.Somanuals.com. All Manuals Search And Download.
Camcorder
13
Installing and Connecting the Projection TV (continued)
Disconnect all pow er sources before making any connections.
Co n n e ct in g t w o VCRs fo r t a p e
e d it in g
(Rear of projection TV)
By connecting a second VCR to MONITOR
OUT, you can record a program being played
by the primary VCR to the second VCR or
perform tape editing and dubbing.
AUX
TO
CONVERTER
IN
1 Connect the VCR intended for playback
using the connection instructions on page
10 of this manual.
VIDEO 1
VIDEO 3
VHF/UHF
OUT
S
VIDEO
VIDEO
MONITOR AUDIO
(VAR/FIX)
Y
VIDEO
VCR (for playback)
VCR (for recording)
L
L
P
R
(MONO)
(MONO)
2 Using an AUDIO/ VIDEO cable, connect
AUDIO and VIDEO IN on the VCR
intended for recording to AUDIO and
VIDEO OUT of MONITOR OUT on the
projection TV.
AUDIO
R
AUDIO
R
AUDIO
R
AUDIO
L
VIDEO
OUT
AUDIO
R
AUDIO
L
VIDEO
OUT
P
LINE
OUT
LINE
IN
IN
IN
COMPONNT
VIDEO
AUDIO-L
AUDIO-R
VIDEO
AUDIO-L
AUDIO-R
2
1
VMC-810S/820S
(not supplied)
VMC-810S/820S
(not supplied)
No t e s:
•
Do not change the input signal while
editing through MONITOR OUT.
(Rear of projectionTV)
•
When connecting a single VCR to the
projection TV: if VCR LINE OUT is
connected to VIDEO IN on the projection
TV, do not connect MONITOR OUT on
the projection TV to the VCR LINE
INPUT (see right). Doing so will cause
program interference and other viewing
problems.
VIDEO IN
MONITOR
OUT
Indicates direction
of signal
VCR
LINE
IN
OUT
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Disconnect all pow er sources before making any connections.
(Rear of projection TV)
Co n n e ct in g a DVD Pla ye r (Up p e r
illu st ra t io n )
AUX
Using an AUDIO and S VIDEO cables,
connect AUDIO and S VIDEO IN on the
projection TV to AUDIO and S VIDEO OUT
on the DVD Player (White-AUDIO Left, Red-
AUDIO Right).
TO
CONVERTER
DVD
S VIDEO
IN
VIDEO 3
LINE OUT
S
VIDEO OUT
S-LINK
DIGITAL OUT
OPTICAL COAXIAL
VIDEO 1
R–AUDIO 1–L VIDEO
VHF/UHF
OUT
S
VIDEO
VIDEO
MONITOR AUDIO
(VAR/FIX)
Y
VIDEO
Co n n e ct in g a DVD Pla ye r w it h
co m p o n e n t vid e o o u t p u t
co n n e ct o rs (Lo w e r illu st ra t io n )
1 Using an AUDIO cable, connect AUDIO of
LINE OUT on the DVD Player to AUDIO of
VIDEO 3 IN on the projection TV (White-
AUDIO Left, Red-AUDIO Right).
L
L
P
B
(MONO)
Audio/S video
outputs
(MONO)
AUDIO
R
AUDIO
R
P
R
AUDIO-R
AUDIO-L
COMPONENT
Connect the DVD Player
directly to the projection TV.
Connecting the DVD Player
through other video
equipment w ill cause
unw anted picture noise.
RK-74A (not supplied)
YC-15V/30V (not supplied)
2 Using three yellow VIDEO cables, connect
Y, PB, and PR of COMPONENT VIDEO
OUT on the DVD Player to Y, PB, and PR of
VIDEO 3 IN on the projection TV.
(Rear of
projection
TV)
RK-74A (not supplied)
AUX
AUDIO-L
AUDIO-R
TO
CONVERTER
No t e s:
IN
•
Since the high quality pictures on a DVD
disc contain a lot of information, picture
noise may appear. In this case, adjust “Noise
Reduction” in the Video menu. (see “Noise
Reduction” on page 26)
VIDEO 1
VIDEO 3
VHF/UHF
OUT
S
VIDEO
VIDEO
MONITOR AUDIO
(VAR/FIX)
DVD
Y
VIDEO
L
LINE OUT
S
VIDEO OUT
COMPONENT VIDEO OUT
B-Y R-Y
S-LINK
DIGITAL OUT
OPTICAL COAXIAL
L
P
B
(MONO)
R–AUDIO 1L VIDEO
Y
(MONO)
AUDIO
R
AUDIO
R
PR
•
Some DVD Player terminals may be labeled
differently. If so, connect as follows:
Connect Y (green) to Y.
COMPNENT
PR
PB
VMC-10HG
Y
Connect PB (blue) to CB, Cb or B-Y.
(not supplied)
Connect PR (red) to CR, Cr or R-Y.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the Projection TV (continued)
Disconnect all pow er sources before making any connections.
Co n n e ct in g a n a u d io syst e m
For more dynamic sound, connect an audio
(Rear of projection TV)
system to the projection TV.
Stereo amplifier
1 Using an AUDIO cable, connect AUDIO
(VAR/ FIX) OUT on the projection TV to
one of the unused Line inputs (e.g. Tape-
2, AUX1, etc.) on the stereo.
IN
VIDEO 3
VIDEO 1
OUT
HRD
S
VIDEO
VIDEO
MONITOR AUDIO
(VAR/FIX)
2 Set the stereo to the chosen Line input
and use the Audio menu to set the audio
output and switch the TV’s speakers off.
(see “Audio Out” and “Speaker” on page
28)
AUDIO-L
(w hite)
Y
VIDEO
L
L
PB
(MONO)
(MONO)
AUDIO
R
AUDIO
R
CONTROL
OUT
S
Line inputs
PR
COMPONENT
AUDIO-R
(red)
RK-74A
(not supplied)
No t e :
•
You can adjust VOLUME, “Bass,”
“Treble,” “Balance,” “MTS/ SAP” and
“Effect” with the supplied remote control.
The control items except VOLUME can be
adjusted only when “Audio Out” is set to
“Variable” in the Audio menu. (see
“Audio Out” on page 28)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Disconnect all pow er sources before making any connections.
Co n n e ct in g a So n y SAVA se rie s
sp e a ke r syst e m
(Rear of projection TV)
Use this connection to control the speaker’s
Dolby* Pro Logic surround system and
super woofer mode with the remote control.
(see “SAVA SP Control” on page 28)
SAVA series
speaker system
IN
VIDEO 3
VIDEO 1
OUT
1 Using the AUDIO cable supplied with the
speaker to AUDIO (VAR/ FIX) OUT on
the projection TV.
AUDIO-L
(w hite)
S
VIDEO
VIDEO
MONITOR AUDIO
(VAR/FIX)
Y
VIDEO
1 IN L
1 IN R
L
L
1
PB
(MONO)
(MONO)
AUDIO
R
AUDIO
R
CONTROL
OUT
S
2 Using the CONTROL S cable, connect
CONTROL S IN on the speaker to
PR
COMPONENT
AUDIO-R (red)
RK-G34, etc. (not supplied)
CONTROL S
OUT
Audio cord supplied
w ith the speakers
CONTROL S OUT on the projection TV.
2
CONTROL S IN
* Manufactured under license from Dolby
Laboratories Licensing Corporation.
Additionally licensed under Canadian patent
number 1,037,877. “Dolby,” the double-D
symbol a and “Pro Logic” are trademarks of
Dolby Laboratories Licensing Corporation.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Set Up
Using the buttons on the front panel of the
projection TV:
Usin g t h e Re m o t e Co n t ro l
Se t t in g Up t h e Pro je ct io n TV
Au t o m a t ica lly
In se rt in g t h e b a t t e rie s
FLASH FOCUS TV/VIDEO
–
VOLUME
+
–
CHANNEL
+
POWER TIMER/STAND BY
The AUTO SET UP feature will allow you to
set the on-screen language and set all
receivable channels.
Insert two size AA (R6) batteries (supplied)
by matching the + and – on the batteries to
the diagram inside the remote control’s
battery compartment.
1 Press POWER to turn on the projection
TV.
The AUTO SET UP feature does not apply for
installations that use a cable box for all channel
selection.
Press SET UP inside the drop-down panel
on the projection TV and the AUTO SET
UP screen appears.
You can also set up the projection TV manually.
(see “Using the Channel Set Up menu” on pages
30 and 31)
E n g l i s h
E s p a ñ o l
:
[ C H + ]
[ C H – ]
POWER
:
F r a n ç a i s
A u t o S e t U p
:
[ V O L + ]
[ V O L – ]
:
No t e s:
•
•
•
Before you perform AUTO SET UP again,
make sure that the input from ANT (not
AUX) is selected by pressing ANT until
“AUX” does not appear next to the
channel number.
First please connect
the antenna.
Press SET UP to exit.
No t e s:
[
]
•
•
•
Remove the batteries to avoid damage
from possible battery leakage whenever
you anticipate that the remote control
will not be used for an extended period.
2 Press CHANNEL + to select English,
CHANNEL – to select Español or
VOLUME + to select Français.
The screen will change to reflect your
choice.
Perform this function during the day, with
the antenna and/ or cable properly
connected, to ensure that all available
channels will be broadcasting and
receivable.
Handle the remote control with care.
Avoid dropping it, getting it wet, or
placing it in direct sunlight, near a heater
or where the humidity is high.
E n g l i s h
E s p a ñ o l
F r a n ç a i s
:
[ C H + ]
[ C H – ]
[ V O L + ]
[ V O L – ]
–
VOLUME
+
–
CHANNEL
+
:
:
Your remote control can be programmed to
operate most video equipment.
(see “Operating Video Equipment” on
page 47)
A u t o S e t U p
:
When you perform AUTO SET UP, all the
settings in the Video, and Audio menus
are reset to the factory settings.
Primero conecte la
antena.
[
]
Oprima SET UP para
salir.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press VOLUME – to continue.
To p e rfo rm AUTO SET UP a g a in
–
VOLUME
+
C o n t i n u e t o
A u t o P r o g r a m
FLASH FOCUS
TV/VIDEO
?
Y e s
N o
:
[ C H + ]
[ C H – ]
SET UP MENU
:
FLASH FOCUS
Press SET UP inside the drop-down panel on
the projection TV and perform steps 2-4
above.
4 Press CHANNEL + to preset channels
automatically.
Press SET UP again to exit.
–
CHANNEL
+
A u t o P r o g r a m
Press FLASH FOCUS.
Ad ju st in g t h e Co n ve rg e n ce
Au t o m a t ica lly (FLASH FOCUS)
The cross pattern appears and FLASH
FOCUS begins to work. The adjustment is
completed when the cross pattern becomes
white.
“Auto Program” appears and the
projection TV starts scanning and
The projection tube image appears on the
screen in three layers (red, green and blue). If
they do not converge, the color is poor and
the picture blurs.
presetting channels automatically. While
scanning, the received channel will be
displayed on the sub screen. When all the
receivable channels are stored, the lowest
numbered channel is displayed.
Before you use your projection TV, be sure to
adjust the convergence.
The FLASH FOCUS feature allows you to
adjust the convergence automatically.
No t e :
•
FLASH FOCUS is canceled if you
perform any other function while FLASH
FOCUS is working.
Tips z
•
It is recommended to perform FLASH FOCUS about
30 minutes after the projection TV is first turned on.
•
You can also perform FLASH FOCUS using the Set
Up menu on page 35.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your New Projection TV
Wa t ch in g t h e TV
Many TV features can be accessed directly
through the remote control. The following
chart will explain the function of some
buttons found on your remote control.
Using the White Labeled Buttons for Projection TV Operations
PICTURE MODE
TV (FUNCTION)
TV POWER
Activates the remote control for use with the projection TV.
Press PICTURE MODE repeatedly to directly
choose one of five different video modes that
best suits the program you are watching.
Vivid: Select for enhanced picture contrast and
sharpness.
Turns the projection TV on and off. If a video input indication (e.g., VIDEO 1,
VIDEO 2) appears on the screen, press TV/VIDEO until a channel number
appears.
Use for direct channel selection. Press 0-9 to select a channel (for example,
to select channel 10, press 1 and 0). The channel will change after 2
seconds, or you can press ENTER for immediate selection.
Standard: Select to display a standard
picture for normal viewing environments.
Movie: Select to display a finely detailed
picture for low light environments.
Personal 1, Personal 2: Select to customize
the “Picture Adjustment” of the Video menu
according to your personal preference.
-
0
9
and ENTER
CH +/–
Press to scan through the channels (+ up or – down).
Speed Surf
1
2
Press and hold CH + or – to change the channel number rapidly.
Release to display the desired channel.
When you select “Movie,” “Personal 1” and
“Personal 2,” you can also perform the “Picture
Adjustment” (such as “Brightness,” “Color,” etc.)
to suit your taste. For details, see “Mode” on
page 26.
VOL +/–
MUTING
Press to adjust the volume (+ up or – down).
Press to mute the sound. “Muting” will appear on the screen and will dim
three seconds later. To restore sound, press again or press VOL +.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART
Using the White Labeled Buttons for Projection TV Operations
Press repeatedly to scroll through available video inputs:
TV, VIDEO 1, VIDEO 2 and VIDEO 3.
TV/VIDEO
If you select “Skip” as a “Video Label” in the Set Up menu, your projection
TV will skip the video input you selected. (see “Video Label” on page 35)
Press to alternate or jump back and forth between two channels. The
projection TV will jump between the current channel and the last channel
selected using the 0-9 buttons.
JUMP
This is useful when you need to copy down information that appears on the
TV’s screen.
Press to freeze the desired picture. The frozen picture is displayed in the
window picture while viewing the normal picture of the current channel in the
main picture.
FREEZE
(yellow labeled
button)
6
Normal motion
picture
Frozen picture
Reciipe
flour
sugar
salt
butter
-
-
-
-
2
-
-
-
1/2
-
-
-
-
-1/2
- 1
-
-
To change the location of the window picture, press V, v, B or b.
Press FREEZE again to display the normal picture.
Press to display the channel number, current time, channel caption (if set),
and MTS/SAP mode (if SAP is selected). The SAP indication disappears and
the other indications dim three seconds later.
DISPLAY
To turn the display off, press DISPLAY again.
(continued)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your New Projection TV (continued)
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART
Using the White Labeled Buttons for Projection TV Operations
Press repeatedly to scroll through available displays:
XDS (Extended Data Service)
Displays a network name, program name, program type, program length,
program description, call letters and time of the show if the broadcaster
offers this service.
CC
Caption Vision
Displayed on the screen if the broadcaster offers this service. (see
“Caption Vision” on page 34)
No display
“Off” appears and the display is canceled.
Press repeatedly until the projection TV displays the approximate time in
minutes (30, 60, or 90) that you want the projection TV to remain on before
shutting off automatically.
SLEEP
Cancel by pressing until “Sleep Off” appears.
Press to change between the VHF/UHF input and the AUX input. (for
detailed connection information, see “Cable and antenna” or “Cable box and
cable” on page 9)
ANT
(AUX input)
Press to scroll through the Multi-channel TV Sound (MTS) options:
Stereo, SAP and Mono. (see “MTS/SAP” on page 27)
MTS/SAP
Press to select an audio option:
Simulated, Surround, BBE and Effect Off. (see “Effect” on page 27)
Press when you are finished using a VCR and you want to switch to the TV
input. The VCR power will remain on.
TV/VTR
Press to turn off the projection TV and all other Sony equipment.
SYSTEM OFF
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Wa t ch in g Tw o Pro g ra m s a t On e Tim e — PIP
The Picture-in-Picture (PIP) feature allows
you to view two channels simultaneously,
one in the full size “main” picture and one in
Using the Yellow Labeled Buttons for PIP Operations
Press to display a window picture.
Each time you press this button, the picture size will change
(1/9 n1/16 nno display).
a smaller “window” picture.
PIP
You can move the window picture to any
location on the screen. (Free Layout Picture-
in Picture)
To close the window picture, press PIP repeatedly until it disappears.
Press POSITION repeatedly to change the location of the window picture
(counterclockwise) around the main picture.
You can also change the location by pressing the V, v, B or b button.
The window picture moves in the direction of the arrow indicated on the
pressed button.
POSITION
The symbol “b” or “B”
indicates w hich picture's
TV channel or input
The symbol “≥”
indicates w hich
picture's sound is being
received.
or
source can be changed.
TV channel or input-
source mode for the
main picture* (yellow -
green-colored)
6
Main
picture
Press to select either the main or window picture in order to change the
10
TV channel or video source using the white labeled buttons below. The
symbol “b” (or “B”) will appear to indicate which picture’s channel or input
mode can be changed.
ACTIVE
TV channel or input-
source mode for the
w indow picture*
(w hite-colored)
Press repeatedly to scroll through the available video inputs for the
picture on which the symbol “b” (or “B”) is displayed. (see “TV/VIDEO” on
page 21)
Window
picture
TV/VIDEO
(white labeled
button)
* It will dim in about 3 seconds.
Tip z
If you press RESET in PIP mode, the window picture
will move to the bottom right (factory-preset location).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your New Projection TV (continued)
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART
Using the Yellow Labeled Buttons for PIP Operations
CH
Press to select the TV channel on which the symbol “b” is
displayed. (for details, see “Watching the TV” on page 20)
Speed Surf
JUMP
or
-
or
0
9
1 Press and hold CH + or – to change the channel number rapidly.
2 Release to display the desired channel.
and ENTER
No t e :
(white labeled button)
•
If one of the pictures received through
PIP is snowy, the entire screen may
become unstable. In this case, erase the
snowy channel. (see “Channel Skip/
Add” on page 31)
ANT
Press to change between the VHF/UHF input and the AUX input for the picture on
which the symbol “b” (or “B”) is displayed.
(white labeled
button)
Press to alternate sound between the main picture and the window picture. The
symbol “ ” will appear for a few seconds to indicate which picture’s sound is being
received.
AUDIO
This is useful when you need to copy down information of the main picture.
Press to freeze the desired scene in the main picture. The frozen picture is displayed
in the window picture while viewing the normal picture in the main picture. The
window picture size is automatically changed to 1/9 if it was 1/16.
Press again to resume normal PIP viewing.
FREEZE
Press to switch the audio and video of the main picture and the window picture.
Each time you press SWAP, the picture and sound of the two will be exchanged.
SWAP
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your SET UP (menus)
S e t U p
P a r e n t a l C o n t r o l
C a p t i o n V i s i o n : C C 1
L a n g u a g e :
V i d e o L a b e l
3 Press V or v to highlight the desired
option.
Le a rn in g Me n u Se le ct io n
E n g l i s h
F l a s h F o c u s :
N o
Use the MENU button to access a menu and
buttons to alter the
settings. Use the following example to learn
ch
S e t U p
P a r e n t a l C o n t r o l
C a p t i o n V i s i o n : C C 1
L a n g u a g e :
V i d e o L a b e l
use the V, v, B, b and
E n g l i s h
MENU
Exit
F l a s h F o c u s :
N o
Move
Select
ch
how to modify settings.
1 Press the MENU button.
Some adjustment menus may require
further operations. For details, see each
menu option.
MENU
Exit
Move
Select
The main menu appears.
V i d e o
M o d e :
P i c t u r e A d j u s t m e n t
4 Press
.
V i v i d
To return to the previous screen (except
for the slider adjustment menus), choose
MENU
T r i n i t o n e :
N o i s e R e d u c t i o n : O f f
H i g h
Options for your selection (Pop-up menu
or Adjusting menu) will be displayed.
ch
“
” at the bottom of the menu and press
or B.
MENU
Move
Select
Exit
6 Once you have completed all menu
corrections, press MENU to exit the menu
2 Press V or v to highlight the desired menu
Pop-up menu
Adjusting menu
screens.
and press
to activate it.
MENU
S e t U p
V i d e o L a b e l
P a r e n t a l C o n t r o l
C a p t i o n V i s i o n : C C 1
V I D E O 1 :
V I D E O 2 :
V I D E O 3 :
V I D E O 1
V I D E O 2
V I D E O 3
S e t U p
P a r e n t a l C o n t r o l
C a p t i o n V
S e t N e w
L a n g u a g e :
E n g l i s h
V i d e o L a b e E s p a ñ o l
F l a s h F o c u Fr a n ç ai s
ch
L a n g u a g e
V i d e o L a b
F l a s h F o c u s :
P a s s w o r d
_
_
_
_
To e xit fro m t h e m e n u s a t a n y
t im e
N o
ch
MENU
Move
Select
Exit
MENU
Exit
Move
Select
MENU
Move
Select
Exit
Press MENU.
5 Press V or v to make your selection and
press to activate it.
The previous screen will reappear.
You may also press b to activate your
selection.
Tip z
You can also use the MENU,
/
and
buttons
inside the front drop-down panel of the projection TV
for the menu selection.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your SET UP (menus) (continued)
You can choose one of five different video modes that best suits the program you
Mode
Customized
picture viewing
Usin g t h e Vid e o Me n u
are watching. You can also perform the “Picture Adjustment” (such as
“Brightness,” “Color,” etc.) for “Movie,” “Personal 1” or “Personal 2” to suit your
taste.
Vivid: Select for enhanced picture contrast and sharpness.
Standard: Select to display a standard picture for normal viewing
environments.
V i d e o
M o d e :
V i v i d
P i c t u r e A d j u s t m e n t
T r i n i t o n e :
H i g h
N o i s e R e d u c t i o n : O f f
ch
Movie: Select to display a finely detailed picture for low light environments.
Personal 1, Personal 2: Select to customize the “Picture Adjustment” of the
Video menu according to your personal preference.
Press PICTURE MODE on the remote control for direct selection of a “Mode”
setting.
MENU
Move
Select
Exit
For detailed information on using the remote
control to modify menu settings, refer to
“Learning Menu Selection” on page 25.
First select “Movie,” “Personal 1” or “Personal 2” from “Mode,” then highlight the
Picture
Adjustment
Picture adjustment
desired option using the V or v button and press
to display the adjusting
To se le ct t h e Vid e o
Display / Highlight
MENU
m e n u :
slider of the selected option.
P e r s o n a l
P i c t u r e
1
Picture: Adjust slider right (up) to increase picture
contrast; left (down) to decrease it.
Brightness: Adjust slider right (up) to brighten the
picture; left (down) to darken it.
/ Select
B r i g h t n e s s
C o l o r
H u e
S h a r p n e s s
ch
Color: Adjust slider right (up) to increase color
intensity; left (down) to decrease it.
MENU
Move
Select
Exit
Hue: Adjust slider right (up) to increase the green
tones; left (down) to increase the red tones.
Sharpness: Adjust slider right (up) to sharpen the
picture; left (down) to soften it.
To re st o re t h e fa ct o ry se t t in g s
Press RESET on the remote control while the
Video menu is selected. To restore each
“Mode” to the factory setting, press RESET
after selecting the mode to be reset.
High: Select to give the white colors a blueish tint.
Medium: Select to give the white colors a neutral tint.
NTSC Standard: Select to give the white colors a reddish tint.
Trinitone
White intensity
adjustment
Select On to reduce picture noise.
Select Off to cancel the feature.
Noise Reduction
Noise reduction
“Noise Reduction” can be set separately from the “Mode” settings of the Video
menu.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Usin g t h e Au d io Me n u
Treble
Sound adjustment
Adjust slider right (up) to increase high pitched sounds.
Adjust slider left (down) to decrease high pitched sounds.
A u d i o
T r e b l e
B a s s
B a l a n c e
M T S / S A P :
A u t o V o l u m e :
E f f e c t :
S p e a k e r :
Bass
Sound adjustment
Adjust slider right (up) to increase low pitched sounds.
Adjust slider left (down) to decrease low pitched sounds.
Sliders
}
S t e r e o
O n
S u r r o u n d
O n
ch
Balance
Sound adjustment
Adjust slider right (up) to emphasize right speaker volume.
Adjust slider left (down) to emphasize left speaker volume.
A u d i o O u t : V a r i a b l e
S A V A S P C o n t r o l
MENU
Move
Select
Exit
MTS/SAP
When the sound is intermittent due to poor reception conditions, select “Stereo”
or “SAP.”
Stereo: Select for stereo reception when viewing a program broadcast in stereo.
SAP: Select to listen to a bilingual broadcast. (non-SAP programs will be muted
when this feature is selected)
Enjoy stereo,
bilingual and mono
programs.
For detailed information on using the remote
control to modify menu settings, refer to
“Learning Menu Selection” on page 25.
Mono: Select for mono reception. (use to reduce noise during stereo broadcasts)
MTS/SAP
Quick MTS access: Press
on the remote control to cycle through the
To se le ct t h e Au d io
m e n u :
“MTS/SAP” options as follows: Stereo n SAP n Mono.
Display / Highlight
/ Select
Auto Volume
Adjust the sound
level.
On: Sound output coming from TV speakers have the volume level equalized for all
channel audio inputs when broadcasts have different sound transmission levels.
Off: Sound output coming from the TV speakers varies according to the received
channel.
MENU
Effect
“Effect” can only be set when “Speaker” is set to “On” or “Off.”
Simulated: Adds a surround-like effect to mono programs.
Surround: Simulates sound with the atmosphere of a movie theater or a concert
hall for stereo programs.
BBE*: Centers the sound intensity to the front, creating an effect as if you were
seated in front of an orchestra.
Customizes
surround sound
effects based on the
program’s audio
type.
To re st o re t h e fa ct o ry se t t in g s
Press RESET on the remote control while the
Audio menu is selected.
* The BBE is manufactured by Sony Corporation
under license from BBE Sound, Inc. It is covered
by U.S. Patent No. 4,638,258 and No. 4,482,866.
The word “BBE” and the BBE symbol are the
trademarks of BBE Sound, Inc.
Off: Normal stereo or mono reception.
Quick Effect access: Press
on the remote control to cycle through the
“Effect” options as follows: Simulated n Surround n BBE n Effect Off.
(continued) 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your SET UP (menus) (continued)
On: Select to listen to the sound from the projection TV speakers alone.
Speaker
Off: Select to turn off the projection TV speakers and listen to the
Custom selection
of audio output
source
projection TV’s sound only through an external audio system’s speakers.
SAVA SP: Select to turn off the projection TV speakers and listen to the projection
TV’s sound only through the Sony SAVA series speaker system. You can
adjust volume, muting, “Surround Mode,” and “Super Woofer Mode” with the
projection TV’s remote control. (see “SAVA SP Control” below)
“Audio Out” can only be set when “Speaker” is set to “Off.”
Fixed: Sound output is held at a fixed level through the audio system.
Use the AV receiver’s remote control to adjust the volume.
Variable: Sound output varies according to the TV settings.
Useful when you want to use your remote control to control the output of a
separate audio system.
Audio Out
Easy control of
volume adjustment
“SAVA SP Control” can only be set when Sony SAVA speaker system is
connected to the AUDIO (VAR/FIX) OUT connectors and “Speaker” is set to
“SAVA SP.” (see “Speaker” above)
You can also adjust the SAVA speaker’s volume using VOL +/– of the projection
TV’s remote control.
SAVA SP Control
Controls Sony
SAVA speaker’s
mode.
Surround Mode: Select to activate the SAVA Speaker’s surround mode.
Super Woofer Mode: Select to activate the SAVA Speaker’s super woofer mode.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Spring: Select Yes to compensate for Daylight Saving Time.
The current time automatically moves ahead one hour.
Fall: Select No at the end of Daylight Saving Time.
The current time moves back one hour.
Usin g t h e Tim e r Me n u
Daylight Savings
Automatically
T i m e r
D a y l i g h t S a v i n g s : Y e s
C u r r e n t T i m e
adjusts the time.
O n
/
O f f T i m e r
C u r r e n t T i m e
– – – – AM
1 Press
(Sun-Sat) is displayed, and press
2 Press V or v until the current hour (1-12) and
AM/PM is displayed, and press
3 Press V or v until the current minute (00-59) is
displayed, and press
, then press V or v until the current day
Current Time
Necessary for the
Timer.
ch
.
:
– – –
-
-
-
-
-
: -
-
A M
Exit
MENU
Move
Select
.
MENU
Move
Select
Exit
After setting the clock you can use the timer
to turn the projection TV on and off.
.
The clock has now started. Press MENU to exit.
For detailed information on using the remote
control to modify menu settings, refer to
“Learning Menu Selection” on page 25.
O n / O f f T i m e r
– – – – – –
1 Press V or v until the desired day or range of days
(Every Sun-Sat, Every Mon-Fri, Sunday, Monday, ...
Saturday, Every Sunday, ... Every Saturday) is
On/Off Timer
Wake up or
– – : – – AM
h
ch
– – –
–
scheduled viewing.
displayed, and press
2 Press V or v until the time (hours and minutes) that
you want the projection TV to remain on is displayed,
.
To se le ct t h e Tim e r
Display / Highlight
MENU
m e n u :
S u n 1 2 : 0 0 A M
Move Select
MENU
Exit
/ Select
and then press
3 Press V or v to set the time duration (maximum of 6 hours) and press
4 Press V or v to select the desired channel and press
.
.
.
The timer is now set. The TIMER/STAND BY indicator on your projection TV
will be lit.
Tip z
Press MENU to exit. To cancel your timer setting, press RESET while in the On/
Off Timer window. Performing Auto Program will erase all Timer settings.
Set daylight saving time before setting the clock. Any
loss of power will cause these settings to be erased.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your SET UP (menus) (continued)
ch
Usin g t h e Ch a n n e l Se t Up
C h a n n e l C a p t i o n
C h a n n e l :
Channel
Caption
Easy recognition
of the channel
you are watching
You can add a caption for up to 32 channels of VHF/
UHF input.
With the Channel Caption window open:
Me n u
– – –
– – – – –
C a p t i o n :
C h a n n e l S e t U p
C h a n n e l C a p t i o n
F a v o r i t e C h a n n e l : A u t o
C h a n n e l S k i p / A d d
A u t o P r o g r a m
1 Press
channel. You can view the channel that is selected
with the Channel Caption menu in the sub screen.
and then press V or v to select the desired
MENU
Move
Select
Exit
C a b l e :
O n
ch
2 Press
.
3 Press V or v to display the first letter or number of the
caption and press
to select it.
MENU
Move
Select
Exit
Repeat until up to five digits are selected.
4 Press
.
For detailed information on using the remote
control to modify menu settings, refer to
“Learning Menu Selection” on page 25.
To erase a caption, press RESET.
Favorite
Channel
User’s favorite
channels
The Favorite Channel feature enables easy access to the eight channels that you
preset (or the last channel that you were watching).
(for details on how to set up this feature, see “Setting and Selecting Favorite
Channel” on page 32)
ch
To se le ct t h e Ch a n n e l Se t Up
m e n u :
ch
Display / Highlight
/ Select
MENU
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel
Skip/Add
Skips unnecessary
channels.
After AUTO SET UP, you can erase unnecessary
channels from the channel preset memory.
With the Channel Skip/Add window open:
1 Press V or v to select the desired channel. You can
view the channel that is selected with the Channel
Skip/Add menu in the sub screen. You can also use
CH +/– or 0–9 and ENTER buttons.
C h a n n e l S k i p / A d d
1 : S k i p
2 : S k i p
ch
3 :
4 :
5 :
6 :
7 :
8 :
9 :
A d d
A d d
A d d
A d d
A d d
A d d
A d d
Select a channel
Move Select
MENU
Exit
2 Press
.
3 Press V or v to select Skip, and press
.
The selected channel will be erased.
If you want to re-enter the skipped channel, follow the steps above and select
Add.
Select Yes to signal the projection TV to automatically program all receivable
channels. When all the receivable channels are stored, the lowest numbered
channel is displayed.
Auto Program
Automatic
channel presetting
Select No to cancel Auto Program.
Select On if your projection TV is connected to a cable system.
Cable
Select Off if your projection TV is connected to an antenna.
Cable system
setting
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your SET UP (menus) (continued)
2 Press V or v to select “Manual” and press
4 Press V or v to select a channel and press
Se t t in g a n d Se le ct in g
Fa vo rit e Ch a n n e l
The Favorite Channel feature of your
projection TV enables easy access to the eight
channels that you preset (or the last channel
that you were watching).
.
.
The Favorite Channel menu will appear.
If you set Channel Caption names (e.g.
CNN, HBO), they will also be displayed.
(see “Channel Caption” on page 30)
You have now selected a favorite channel.
F a v o r i t e C h a n n e l
ch
1 .
2 .
3 .
4 .
5 .
6 .
7 .
1
8
C N N
1 0 S P T N
2 0
3 0
4 0
5 0
8 . 1 0 0
F a v o r i t e C h a n n e l
ch
Your Favorite Channel options can be set
automatically or manually.
1 .
2 .
3 .
4 .
5 .
6 .
7 .
1
2
C N N
Select a channel
1 0 S P T N
2 0
3 0
4 0
5 0
The factory setting for “Favorite Channel” is
“Auto.”
5 Use V and v to program other favorite
8 . 1 0 0
channels. (Follow steps 3 and 4.)
Select a position
When “Favorite Channel” is set to “Auto,”
the last eight channels selected with the 0–9
buttons will be set as Favorite Channel
options. If you want to input your own
selections as Favorite Channel settings, set to
“Manual.”
6 Press MENU when you have finished.
Your favorite channels are now ready for
use.
3 Press V or v to select a position (1–8), and
press
.
F a v o r i t e C h a n n e l
ch
1 .
2 .
3 .
4 .
5 .
6 .
7 .
1
2
C N N
Se t t in g Fa vo rit e Ch a n n e l m a n u a lly
1 0 S P T N
2 0
3 0
4 0
5 0
1 Select “Favorite Channel” from the
Channel Set Up menu. (see page 30)
8 . 1 0 0
C h a n n e l S e t U p
Select a channel
C h a n n e l C a p t i o n
F a v o r i t e C h a n n e : A u t o
Manual
C h a n n e l S k i p / A d d
A u t o P r o g r a m
C a b l e :
O n
ch
MENU
Move
Select
Exit
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Usin g Fa vo rit e Ch a n n e l
3 Press
to select the channel.
Ch a n g in g Fa vo rit e Ch a n n e l ch o ice s
You have the option of returning to the
Favorite Channel screen to adjust any of your
favorite channel choices.
The selected channel will be displayed for
normal viewing.
You can use the Favorite Channel feature to
directly select the channel you want to watch.
1 Press
once.
Simply proceed as described in “Setting
Favorite Channel manually” (skip step 2 if
“Manual” is already selected).
The favorite channel menu and a window
picture will be superimposed over the
current channel. The window picture
displays the channel selected from the
menu.
When you reach step 3, select the position
you want to change and press
v to select a new channel.
. Press V or
To cancel the favorite channel menu before
selecting a channel, press V or v to select
“Exit” at the bottom of the menu and press
.
F a v o r i t e C h a n n e l
1
2
C N N
ch
1 .
2 .
3 .
4 .
5 .
6 .
7 .
6
2
1 0 S P T N
2 0
3 0
4 0
5 0
1 0 0
E x i t
1 0 S P T N
2 0
3 0
4 0
5 0
8 . 1 0 0
Select a channel
2 Press V or v to select the channel that you
Press MENU when you are done.
wish to view from the menu.
The picture of the selected channel will be
displayed in the window picture.
1
2
C N N
1 0 S P T N
2 0
3 0
4 0
5 0
1 0 0
E x i t
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your SET UP (menus) (continued)
Allows you to block TV programs that you feel are unsuitable for your
children.
(see “Using the Parental Control Feature” on page 36 for details)
Usin g t h e Se t Up Me n u
Parental
Control
Blocks programs
unsuitable for
children.
S e t U p
P a r e n t a l C o n t r o l
C a p t i o n V i s i o n : C C 1
L a n g u a g e :
E n g l i s h
V i d e o L a b e l
F l a s h F o c u s :
N o
ch
S e t U p
P a r e n t a l C o n t r o l
C a p t i o n V i s i o n :
L a n g u a g e :
V i d e o L a b e l
F l a s h F o c u s :
Some programs are broadcast with Caption Vision.
Caption Vision
Television closed
caption display
C C 1
C C 2
C C 3
To display “Caption Vision,” select CC 1, CC 2,
CC 3, CC 4, TEXT1, TEXT2, TEXT3 or TEXT4 from
the menu. Then press the CC button until “Caption
Vision” is displayed.
MENU
Exit
Move
Select
C C 4
ch
T e x t 1
T e x t 2
T e x t 3
T e x t 4
For detailed information on using the remote
control to modify menu settings, refer to
“Learning Menu Selection” on page 25.
MENU
Move
Select
Exit
CC 1, CC 2, CC 3 or CC 4 displays a printed
version of the dialogue or sound effects of a
program. (The mode should be set to CC 1 for most
programs.) TEXT1, TEXT2, TEXT3, or TEXT4
displays network/station information presented using
either half or the whole screen.
To se le ct t h e Se t Up
m e n u :
Display / Highlight
/ Select
Notes:
MENU
• Poor reception of TV programs can cause errors in Caption Vision and XDS.
Captions may appear with a white box or other errors instead of the intended
text.
• XDS, Caption Vision, and the status display cannot be used at the same time.
Select from available languages (English, Español or Français) to display all
Language
menus in your language of choice.
Preferred language
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Label
Easy recognition of
connected
This feature allows you to label each input mode so
that you can easily identify the connected equipment
(e.g. you can label VIDEO 1 IN as VHS).
V i d e o L a b e l
V I D E O 1 :
V I D E O 2 :
V I D E O 1
V I D E O 2
V I D E O 3
V I D E O 3 :
equipment
(e.g. SAT, VHS,
etc.)
MENU
Exit
Move
Select
With the Video Label window open:
V i d e o L a b e l
1 Press V or v to select the input mode you want to
V I D E O 1 :
V I D E O 2 :
V I D E O 3 :
V i d e o 1
V H S
8 m m
B e t a
L D
label and press
.
S A T
D V D
A V R E C E I V E R
D T V
2 Press V or v to select the label and press
.
S k i p
MENU
Move
Select
Exit
Video Label Options:
VIDEO 1: VIDEO 1, VHS, 8mm, Beta, LD, SAT, DVD, AV RECEIVER, DTV,
Skip
VIDEO 2/3: VIDEO 2/VIDEO 3, VHS, 8mm, Beta, LD, SAT, DVD, DTV, Skip
If you select “Skip,” your projection TV will skip this connection when you scan
through video sources using the TV/VIDEO button.
Select Yes and press
adjustment is completed, the cross pattern on the screen becomes white. (for
details, see page 19)
to start Flash Focus adjustment. When the
Flash Focus
Automatic
convergence
adjustment
Select No to cancel Flash Focus.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your SET UP (menus) (continued)
1 Select “Parental Control” from the Set Up
4 Make sure that “Country ”is highlighted,
and press
Usin g t h e Pa re n t a l Co n t ro l
Fe a t u re
The TV programs and movies shown on TV
are given a rating signal based on the
following rating systems.
menu. (see page 34)
.
S e t U p
P a r e n t a l C o n t r o l
C a p t i o n V
P a r e n t a l C o n t r o l
C o u n t r y :
U . S . A .
C a n a d a
S e t N e w
L a n g u a g e
P a r e n t a l L o c
R a t i n g : C h i l d
C h a n g e P a s s w o r d
P a s s w o r d
_
_
_
_
V i d e o L a b
F l a s h F o c u s :
N o
ch
In U.S.A.: U.S. Television Parental
Guidelines to rate television programs (U.S.
TV ratings), and Motion Picture Association
of America (MPAA) Guidelines to rate
movies including those shown on TV (movie
ratings)
In Canada: Canadian English Language
ratings to rate television programs in English,
and Canadian French Language ratings to
rate those in French.
MENU
Move
Select
Exit
MENU
Move
Select
Exit
2 Enter a four digit password* using the 0–
5 Press V or v to select your country (U.S.A.
or Canada), and press
9 buttons.
S e t U p
P a r e n t a l C o n t r o l
C a p t i o n V
C o n f i r m
L a n g u a g e
V i d e o L a b
F l a s h F o c u s :
.
P a r e n t a l C o n t r o l
C o u n t r y :
P a r e n t a l L o c k :
P a s s w o r d
U . S . A .
_
_
_
_
Off
C h i l d
C h a n g e P a s s w o r d
N o
ch
R a t i n g :
MENU
Move
Select
Exit
To block programs you feel are unsuitable for
your children, you need to set the TV for the
desired rating systems. Sony’s predetermined
ratings are also available.
See pages 43 to 45 for a description of the
ratings.
The Parental Control feature of the TV
functions by receiving the rating signal from
your local broadcasting station or cable
service provider.
MENU
Move
Select
Exit
* Do not enter “4357” corresponding to “HELP”
on a phone number pad. (see page 43)
6 Press V or v to select “Parental Lock,”
and press
3 To confirm the password, re-enter the
.
same password with the 0–9 buttons.
P a r e n t a l C o n t r o l
C o u n t r y :
P a r e n t a l L o c k :
R a t i n g :
Your password is stored and the Parental
Control menu automatically appears.
If you want to change the password, see
U . S . A .
On
C Off
C h a n g e P a s s w o r d
page 42.
P a r e n t a l C o n t r o l
C o u n t r y :
P a r e n t a l L o c k :
R a t i n g : C h i l d
C h a n g e P a s s w o r d
U . S . A .
MENU
Move
Select
Exit
Off
Act iva t in g t h e Pa re n t a l Co n t ro l
Fe a t u re
First, set a password, then select your desired
rating from Sony’s predetermined ratings.
36
MENU
Move
Select
Exit
Download from Www.Somanuals.com. All Manuals Search And Download.
To d e a ct iva t e t h e Pa re n t a l Co n t ro l
fe a t u re
3 Press V or v to select “Parental Lock,”
and press
7 Press V or v to select “On,” and press
.
.
P a r e n t a l C o n t r o l
P a r e n t a l C o n t r o l
If you set “Parental Lock” in the Parental
Control menu to “Off,” the Parental Control
feature will not work and you can view all
TV programs and movies shown on TV.
C o u n t r y :
U . S . A .
C o u n t r y :
P a r e n t a l L o c k :
R a t i n g : C h i l d
C h a n g e P a s s w o r d
U . S . A .
P a r e n t a l L o c k :
On
C Off
C h a n g e P a s s w o r d
On
R a t i n g :
MENU
Move
Select
Exit
MENU
1 Select “Parental Control” from the Set Up
Move
Select
Exit
menu. (see page 34)
4 Press V or v to select “Off,” and press
8 Press V or v to select “Rating,” and press
S e t U p
P a r e n t a l C o n t r o l
C a p t i o n V
L a n g u a g e
V i d e o L a b e l
F l a s h F o c u s :
.
.
1
N o
P a s s w o r d
_
_
_
_
P a r e n t a l C o n t r o l
P a r e n t a l C o n t r o l
ch
C o u n t r y :
P a r e n t a l L o c k :
R a t i n g : C h i l d
C h a n g e P a s s w o r d
U . S . A .
C o u n t r y :
U . S . A .
Off
P a r e n t a l L o c k :
R a t i n g :
On
C h i l d
C h a n g e P Yo u t h
Y o u n g A d u l t
C u s t o m
MENU
Move
Select
Exit
A g e s u p t o
Move Select
6
2 Enter your four digit password using the
MENU
Move
Select
Exit
MENU
Exit
0-9 buttons.
9 Press V or v to select a desired rating
The Parental Control menu appears.
5 Press MENU to exit the menu.
(“Child,” “Youth” and “Young Adult”),
P a r e n t a l C o n t r o l
C o u n t r y :
P a r e n t a l L o c k :
R a t i n g : C h i l d
C h a n g e P a s s w o r d
U . S . A .
and press
.
On
If you want to select the ratings from
“Custom,” go to step 4 of “Selecting a
Custom Rating in U.S.A.” on page 38 or
“Selecting a Custom Rating in Canada”
on page 41, according to your “Country”
setting.
MENU
Move
Select
Exit
10 Press MENU to exit the menu.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your SET UP (menus) (continued)
3 Press V or v to select “Rating,” and press
To u n lo ck t h e Pa re n t a l Co n t ro l fe a t u re
t e m p o ra rily
Se le ct in g a Cu st o m Ra t in g in
U.S.A.
.
When you select a Parental Control program,
no sound or picture except for a channel
P a r e n t a l C o n t r o l
If you want to select the ratings to be blocked
from “Custom” once you have activated the
Parental Control feature (page 37), follow the
procedure below.
C o u n t r y :
U . S . A .
P a r e n t a l L o c k :
R a t i n g :
C h a n g e P Yo u t h
Y o u n g A d u l t
C u s t o m
On
C h i l d
number will appear. The
indicator is
displayed. To view the program, follow the
steps below.
A g e s u p t o
Move Select
6
MENU
Exit
For a detailed description of each rating, see
“What the Ratings Mean” on pages 43 to 45.
1 Press ENTER to display the “Password”
screen.
4 Press V or v to select “Custom,” and
press
1 Select “Parental Control” from the Set Up
2 Enter your password using the 0–9
buttons. Parental Control will be canceled
(“Parental Lock” set to “Off”) until you
turn your projection TV off.
.
menu. (see page 34)
S e t U p
P a r e n t a l C o n t r o l
C u s t o m R a t i n g
C a p t i o n V
1
N o
P a s s w o r d
T V R a t i n g
M o v i e R a t i n g
_
_
_
_
L a n g u a g e
V i d e o L a b e l
F l a s h F o c u s :
U n r a t e d :
V i e w A l l
ch
MENU
Move
Select
Exit
S e l e c t c a t e g o r y
MENU
Move
Select
Exit
2 Enter your four digit password using the
0–9 buttons.
The Parental Control menu appears.
Make sure that “Country” is set to
“U.S.A.”
P a r e n t a l C o n t r o l
C o u n t r y :
P a r e n t a l L o c k :
R a t i n g : C h i l d
C h a n g e P a s s w o r d
U . S . A .
On
MENU
Move
Select
Exit
38
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Press V or v to select “ ,” and press
The indicator automatically appears
.
8 Press B or b to select the extender to be
viewed, and press
First, select a TV rating.
.
5 Press V or v to select “TV Rating,” and
beside the selected rating and all “higher”
ratings, indicating that the programs that
match the ratings will be blocked.
press
.
T V R a t i n g
_
_
_
–
–
–
TV–Y
TV–Y7
TV–G
TV–PG
TV–14
TV–MA
:FV _
T V R a t i n g
:D – L – S – V –
:D – L – S – V –
_
_
_
_
_
_
TV–Y
TV–Y7
TV–G
TV–PG
TV–14
TV–MA
T V R a t i n g
:FV _
:
L – S – V
_
_
_
–
–
–
TV–Y
TV–Y7
TV–G
TV–PG
TV–14
TV–MA
:D _ L _ S _ V _
:D _ L _ S _ V _
:FV _
B l o c k c o n t e n t
Move Select
MENU
Exit
:
L _ S _ V _
:D – L – S – V –
:D – L – S – V –
S e l e c t r a t i n g
Move
:
L – S – V
MENU
Exit
Select
9 Press V or v to select “–,” and press
.
S e l e c t c a t e g o r y
Move Select Exit
MENU
“–” appears beside the selected extender,
indicating that the programs that match
the extender can be viewed.
6 Press V or v to select the TV rating to be
blocked, and press
Some ratings have additional content
ratings called “extenders.” The extenders
are defined as follows: D (sexually
suggestive Dialog), FV (Fantasy
Violence), L (coarse Language), S (Sexual
situations) and V (Violence). By setting
the extenders, you can define additional
viewing limits. For more details of
extenders, see page 45.
.
If you select “ ,”
is displayed to
T V R a t i n g
show that the programs that match the
extender will be blocked again.
_
_
_
_
_
TV–Y
TV–Y7
TV–G
TV–PG
TV–14
TV–MA
:FV _
:D _ L _ S _ V _
:D _ L _ S _ V _
T V R a t i n g
:
L _ S _ V _
_
_
_
–
–
–
TV–Y
TV–Y7
TV–G
TV–PG
TV–14
TV–MA
:FV _
A l l o w r a t i n g
Move Select
MENU
Exit
:D – L – S – V _
:D – L – S – V –
:
L – S – V
All of the extenders included in the
selected ratings will be blocked. If you
wish to allow any of them to be viewed,
go to step 8.
S e l e c t c a t e g o r y
Move Select Exit
MENU
(continued)
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your SET UP (menus) (continued)
To b lo ck TV p ro g ra m s a n d /o r m o vie s
fo r w h ich a ra t in g sig n a l is n o t g ive n
(NR a n d N/A)
10 Repeat steps 8 and 9 for other extenders.
13 Press V or v to select the movie rating to
be blocked, and press
.
All programs that match the ratings you
select and higher, except for the
extenders that were canceled, will be
blocked.
M o v i e R a t i n g
G
–
For a description of the NR and N/ A ratings,
see page 44.
PG
–
PG–13
R
NC–17
X
–
–
–
11 After setting of the TV rating is complete,
1 Perform steps 1–4 of “Selecting a Custom
B l o c k r a t i n g
Move Select
press V or v to select “ ,” and press
.
Rating in U.S.A.” on page 38.
MENU
Exit
2 Press V or v to select “Unrated,” and
C u s t o m R a t i n g
T V R a t i n g
M o v i e R a t i n g
press
.
14 Press V or v to select “ ,” and press
The indicator automatically appears
.
U n r a t e d :
V i e w A l l
C u s t o m R a t i n g
beside the selected rating and all “higher”
ratings, indicating that the programs that
match the ratings will be blocked.
T V R a t i n g
M o v i e R a t i n g
U n r a t e d :
S e l e c t c a t e g o r y
Move Select Exit
View A l l
T V
M o v i e
MENU
B o t h
Second, select a movie rating.
12 Press V or v to select “Movie Rating,” and
press
M o v i e R a t i n g
N o b l o c k
Move Select
G
PG
PG–13
R
–
–
–
–
MENU
Exit
.
NC–17
X
–
M o v i e R a t i n g
S e l e c t r a t i n g
Move Select
–
–
–
–
–
–
G
PG
PG–13
R
NC–17
X
MENU
Exit
15 Press MENU to exit the menu.
S e l e c t r a t i n g
Move Select
MENU
Exit
40
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press V or v to select “Rating,” and press
3 Press V or v to select the type of
Se le ct in g a Cu st o m Ra t in g in
Ca n a d a
.
programs to be blocked, and press
.
C u s t o m R a t i n g
P a r e n t a l C o n t r o l
If you want to select the ratings to be blocked
from “Custom” once you have activated the
Parental Control feature (page 37), follow the
procedure below.
C o u n t r y :
P a r e n t a l L o c k :
R a t i n g :
C h a n g e P Yo u t h
Y o u n g A d u l t
C u s t o m
C a n a d a
T V R a t i n g
M o v i e R a t i n g
U n r a t e d :
On
C h i l d
V i e w A l l
T V
M o v i e
B o t h
B l o c k a l l u n r a t e d
p r o g r a m m i n g
A g e s u p t o
Move Select
6
MENU
Move
Select
Exit
MENU
For a detailed description of each rating, see
“What the Ratings Mean” on pages 45 and
46.
Exit
4 Press V or v to select “Custom,” and press
.
1 Select “Parental Control” from the Set Up
To b lo ck ...
Se le ct ...
menu. (see page 34)
C u s t o m R a t i n g
No program
View All
S e t U p
P a r e n t a l C o n t r o l
E n g l i s h R a t i n g
F r e n c h R a t i n g
U . S . A . R a t i n g
(to view any unrated TV
program and movie)
C a p t i o n V
1
N o
P a s s w o r d
_
_
_
_
L a n g u a g e
V i d e o L a b e l
F l a s h F o c u s :
ch
Unrated TV programs
Unrated movies
TV
S e l e c t c a t e g o r y
MENU
Move
Select
Exit
MENU
Move
Select
Exit
Movie
Both
2 Enter your four digit password using the
Unrated TV programs and
movies
(continued)
0–9 buttons.
The Parental Control menu appears.
Make sure that “Country” is set to
4 Press MENU to exit the menu.
“Canada.”
P a r e n t a l C o n t r o l
C o u n t r y :
P a r e n t a l L o c k :
R a t i n g : C h i l d
C h a n g e P a s s w o r d
C a n a d a
On
MENU
Move
Select
Exit
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your SET UP (menus) (continued)
5 Press V or v to select the rating you want
to block, and press
The selected rating appears.
7 Press V or v to select “ ,” and press
The indicator automatically appears
.
Ch a n g in g t h e Pa ssw o rd
.
beside the selected rating and all
“higher” ratings, indicating that the
programs that match the ratings will be
blocked.
1 Select “Parental Control” from the Set Up
menu. (see page 34)
Canadian English Rating
S e t U p
P a r e n t a l C o n t r o l
E n g l i s h R a t i n g
C a p t i o n V
N o
_
_
_
_
_
_
P a s s w o r d
C
G
C8+
PG
14+
18+
_
_
_
_
L a n g u a g e
V i d e o L a b e l
F l a s h F o c u s :
E n g l i s h R a t i n g
ch
_
C
_
G
_
C8+
PG
S e l e c t r a t i n g
Move Select
MENU
Move
Select
Exit
14+
18+
MENU
Exit
2 Enter your four digit password using the
0–9 buttons.
S e l e c t r a t i n g
Move Select
MENU
Exit
Canadian French Rating U.S. TV Rating
The Parental Control menu appears.
F r e n c h R a t i n g
U . S . A . R a t i n g
_
_
_
_
_
G
_
_
_
_
_
_
TV–Y
TV–Y7
TV–G
TV–PG
TV–14
TV–MA
P a r e n t a l C o n t r o l
Some U.S. TV ratings have additional
content ratings called “extenders,” such
as D, FV, L, S and V. By setting the
8 ans+
13 ans+
16 ans+
18 ans+
:FV _
C o u n t r y :
P a r e n t a l L o c k :
R a t i n g : C h i l d
C h a n g e P a s s w o r d
U . S . A .
On
:D _ L _ S _ V _
:D _ L _ S _ V _
:
L _ S _ V _
extenders, see steps 7 to 10 of “Selecting a
Custom Rating in U.S.A.” on pages 39
and 40. For more details of extenders, see
page 45.
S e l e c t r a t i n g
Move Select
S e l e c t r a t i n g
Move Select
MENU
MENU
Exit
Exit
MENU
Move
Select
Exit
3 Press V or v to select “Change Password,”
and press
6 Press V or v to select the TV rating to be
blocked, and press
All of the extenders included in the
selected ratings will be blocked. If you
wish to allow any of them to be viewed,
go to step 8.
.
.
Example: Canadian English Rating
P a r e n t a l C o n t r o l
C o u n t r y :
E n g l i s h R a t i n g
U . S . A
P a r e n t a l L o c k : O n
_
_
_
_
C
G
C8+
PG
14+
18+
R a t i n g :
C h i l d
C h a n g e P a s s w o r d
N e w
8 Press MENU to exit the menu.
_ _ _ _
U s e [ 0 - 9 ] t o e n t e r
n e w f o u r d i g i t
p a s s w o r d
_
A l l o w r a t i n g
Move Select
MENU
Move
Exit
MENU
Exit
42
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Enter a new four digit password using
the 0–9 buttons.
If yo u h a ve fo rg o t t e n yo u r p a ssw o rd
Wh a t t h e Ra t in g s Me a n
In step 2 of “Changing the Password” on
page 42, enter the master password “4357”
(corresponding to “HELP” on a phone
number pad). You can then store a new
password.
P a r e n t a l C o n t r o l
C o u n t r y :
P a r e n t a l L o c k : O n
R a t i n g :
C h a n g e P a s s w o r d
C o n f i r m
_ _ _ _
U . S . A
Ra t in g s in U.S.A.
C h i l d
So n y’s p re d e t e rm in e d ra t in g s
These are original ratings that Sony
predetermined according to the viewer’s age.
Each rating allows you to view the certain
programs, as follows.
C o n f i r m p a s s w o r d
MENU
Move
Exit
No t e s:
•
If you entered “4357” as your password
the first time, you cannot store a new
password. (see step 2 of “Activating the
Parental Control Feature” on page 36)
5 Enter the password set in step 4 again to
confirm.
See pages 44 and 45 for a description of each
rating.
If you entered it incorrectly, “Password
incorrect” appears.
Child: Suitable for children under the age of
•
When you select a Parental Control
6.
program and the
indicator is
Re-enter the correct password.
Viewable U.S. movie ratings: G, NR, and N/ A
Viewable U.S. TV ratings: TV-Y, TV-G, and
TV-NR
displayed on the screen, you cannot view
that program even if you enter “4357.”
(see “To unlock the Parental Control
feature temporarily” on page 38)
6 Press MENU to exit the menu.
Youth: Suitable for children aged 7 and
older.
Viewable U.S. movie ratings: G, PG, NR, and
N/ A
Viewable U.S. TV ratings: TV-Y, TV-Y7, TV-
G, TV-PG, and TV-NR
Young Adult: Suitable for children aged 13
and older.
Viewable U.S. movie ratings: G, PG, PG-13,
NR, and N/ A
Viewable U.S. TV ratings: TV-Y, TV-Y7, TV-
G, TV-PG, TV-14, and TV-NR
(continued)
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your SET UP (menus) (continued)
TV-Y7 (Directed to Older Children): This
program is designed for children aged 7 and
above. Themes and elements in this program
may include mild fantasy violence or
slapstick violence, or may frighten children
under the age of 7.
U.S. m o vie ra t in g s
NC-17 or X (No One 17 Or Under
Admitted.): This is a film that most parents
would consider not suitable for children
aged 17 and under. There may be violence,
sex, abberrational behavior, drug abuse or
other elements of concern.
U.S. movie ratings are for movies (including
those shown on TV) rated according to the
Motion Picture Association of America
(MPAA) Guidelines.
G (General Audiences—All Ages
Admitted): In G-rated films no strong words
are used, the violence is at a minimum,
nudity and sex scenes are not present, nor is
there any drug use.
TV-G (General Audience): Most parents
would find this program suitable for all ages.
It contains little or no violence, no strong
language and little or no sexual dialog or
situations.
NR (Not Rated): This is a film that a
producer has not rated, intending to have his
film widely released.
N/A (Not Applicable): This is a film that a
producer considers outside the scope of the
MPAA ratings.
PG (Parental Guidance Suggested. Some
Material May Not Be Suitable For
Children): This is a film which may need to
be monitored first by parents.
TV-PG (Parental Guidance Suggested):
This program contains some material that
parents may find unsuitable for younger
children.
No t e :
•
NR and N/ A ratings are shown together
as “Unrated” in the menu.
PG-13 (Parents Strongly Cautioned. Some
Material May Be Inappropriate For
Children Under 13): Parents are alerted to be
very careful about the attendance of their
under-teenage children when viewing.
TV-14 (Parents Strongly Cautioned): This
program contains some material that many
parents would find unsuitable for children
under the age of 14.
U.S. TV ra t in g s
U.S. TV ratings are for TV programs rated
according to the U.S. Television Parental
Guidelines.
TV-MA (Mature Audience Only): This
program is specifically designed to be
viewed by adults and therefore may be
unsuitable for children under the age of 17.
R (Restricted, Under 17 Require
Accompanying Parent Or Adult Guardian):
This film includes hard language, tough
violence, nudity, drug abuse or other
elements of concern.
TV-Y (All Children): This program is
designed for young children aged 2–6 and is
appropriate for all children.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Young Adult: Suitable for children aged 14
and older.
Viewable Canadian English Language
ratings: C, G, C8+, PG and 14+
Viewable Canadian French Language
ratings: G, 8 ans+, 13 ans+
TV-NR (Not Rated/Unrated): This is a
program broadcast without any rating, such
as news, news flashes or sports.
Ra t in g s in Ca n a d a
So n y’s p re d e t e rm in e d ra t in g s
No t e :
These are original ratings that Sony
predetermined according to the viewer’s age.
Each rating allows you to view the certain
programs, as follows.
The TV-NR rating is shown as “Unrated” in
the menu.
Viewable U.S. TV ratings: TV-Y, TV-Y7, TV-
G, TV-PG, TV-14, and TV-NR
See the right column and page 46 for a
description of each rating.
Ab o u t t h e e xt e n d e rs o f U.S. TV ra t in g s
Ca n a d ia n En g lish La n g u a g e ra t in g s
TV-Y7, TV-PG, TV-14 and TV-MA ratings
have additional content ratings called
“extenders” to define additional viewing
limits. The extenders are defined as follows:
Child: Suitable for children under the age of
The Canadian English Language Ratings are
for TV programs in English broadcast in
Canada.
7.
Viewable Canadian English Language
ratings: C and G
D (sexually suggestive Dialog): Programs
containing suggestive dialog, or sexual
innuendo
Viewable Canadian French Language
ratings: G
Viewable U.S. TV ratings: TV-Y, TV-G, and
C (Programming intended for children
under age 8): There will be no realistic
scenes of violence or no offensive language,
nudity or sexual content. Careful attention is
paid to themes, which could threaten
TV-NR
FV (Fantasy Violence): Programs containing
cartoon violence occurring in TV-Y7
programs only
Youth: Suitable for children aged 8 and
older.
children’s sense of security and well-being.
Viewable Canadian English Language
ratings: C, G, C8+ and PG
Viewable Canadian French Language
ratings: G and 8 ans+
Viewable U.S. TV ratings: TV-Y, TV-Y7, TV-
G, TV-PG, and TV-NR
G (General Audience): Will contain very
little violence, either physical or verbal or
emotional. There may by some inoffensive
slang, no profanity and no nudity.
L (coarse Language): Programs containing
coarse language
S (Sexual situations): Programs containing
sexual content
(continued)
V (Violence): Programs containing violence
There may be some profanity, violence or
brief nudity in these programs.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your SET UP (menus) (continued)
E (Exempt): Exempt programming includes:
news, sports documentaries and other
information programming: talk shows,
music videos, and variety programming.
C8+ (Programming generally considered
acceptable for children 8 years and over to
watch on their own): Violence will not be
portrayed as the preferred, acceptable, or
only way to resolve conflict; or encourage
children to imitate dangerous acts which
they may see on television. There will be no
profanity, nudity or sexual content.
13 ans+ (Programming may not suitable for
children under the age of 13): Viewing with
an adult is strongly recommended for
children under 13.
No t e :
16 ans+ (Programming is not suitable for
children under the age of 16): Contains
frequent scenes of violence or intense
violence.
The E (Exempt) rating is not shown in the
menu.
PG (Parental Guidance): Programming
intended for a general audience but which
may not be suitable for younger children.
Parents may consider some content
inappropriate for unsupervised viewing by
children aged 8 - 13.
18 ans+ (Programming restricted to adults):
Contains constant violence or scenes of
extreme violence.
Ca n a d ia n Fre n ch La n g u a g e ra t in g s
The Canadian French Language Ratings are
for TV programs in French broadcast in
Canada.
E (Exempt): Exempt programming.
No t e :
G (General): Programming intended for
audience of all ages. Contains no violence, or
the violence it contains is minimal or is
depicted appropriately with humor or
caricature or in an unrealistic manner.
14+ (Programming contains themes or
content which may not be suitable for
viewers under the age of 14): Parents are
strongly cautioned to exercise discretion in
permitting viewing by pre-teens and early
teens.
The E (Exempt) rating is not shown in the
menu.
8 ans+ (8+ General - Not recommended for
young children): Programming intended for
a broad audience but contains light or
occasional violence that could disturb young
children. Viewing with an adult is
recommended for young children (under the
age of 8).
18+ (Adult): May contain violence integral
to the development of the plot, character or
theme, intended for adult audiences. May
contain graphic language and explicit
portrayals of nudity and/ or sex.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Video Equipment
Minolta
305, 304
323, 324, 325, 326
325, 338, 321
314, 336, 337
309, 308
VCR m a n u fa ct u re r co d e n u m b e rs
Se t t in g t h e Ma n u fa ct u re r' s
Co d e
Mitsubishi/MGA
Multitech
NEC
Olympic
Optimus
Panasonic
Pentax
Philco
Philips
Pioneer
Quasar
Ma n u fa ct u re r
Co d e
Sony (VHS VCR)
Sony (8mm VCR)
Sony (Beta, ED Beta, VCRs)
Aiwa
301
302
303
You can use the supplied remote control to
operate Sony or non-Sony video equipment
that has an infrared sensor.
327
308, 309, 306, 307
305, 304
338
Admiral (M. Ward)
Audio Dynamic
Bell & Howell (M. Ward)
Broksonic
Canon
Citizen
327
314, 337
330
319, 317
309, 308
332
308, 309
308, 309, 310
308
Press CODE SET, DVD/ VTR (FUNCTION),
and the 0-9 buttons to enter the
manufacturer’s code number (see the
following chart), then press ENTER.
308, 309, 306
304, 305, 308, 309, 311,
329, 312, 313, 310
309, 330, 328, 335, 324, 338
314
RCA/PROSCAN
Craig
Curtis Mathis
Daewoo
DBX
Dimensia
302, 332
304, 338, 309
341, 312, 309
314, 336, 337
304
For example, to operate a Sony 8mm VCR:
Realistic
Sansui
Samsung
Sanyo
Scott
Sharp
Signature 2000 (M. Ward)
Sylvania
Symphonic
SV2000
Tashiro
Tatung
Teac
Technics
Teknica
Toshiba
Wards
FUNCTION
DVD/VTR
ENTER
CODE SET
322, 313, 321
330, 335
312, 313, 321, 335, 323, 324, 325, 326
327, 328
3
0
2
Emerson
Fisher
319, 320, 316, 317, 318, 341
330, 335
If t h e re m o t e co n t ro l d o e sn ’t w o rk
See the tips on page 49.
338, 327
308, 309, 338, 310
Funai
338
•
General Electric
Go Video
Goldstar
Hitachi
Instant Replay
JC Penney
JVC
Kenwood
LXI (Sears)
Magnavox
Marantz
329, 304, 309
340, 339, 322
332
338
338
332
306, 304, 305, 338
309, 308
314, 336, 337
314, 336, 338, 337
309, 308
309, 305, 304, 330, 314, 336, 337
314, 336, 337
314, 336, 332, 337
332, 305, 330, 335, 338
308, 309, 310
314, 336, 337
332
338
312, 311
327, 328, 335, 331, 332
330, 314, 336, 337
331
Yamaha
Zenith
Marta
Memorex
309, 335
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Video Equipment (continued)
MDP m a n u fa ct u re r co d e n u m b e rs
To search the picture Press ) or 0 during
forward or backward playback. Release to resume
normal playback.
Operating a VCR using the remote control
Press DVD/VTR (POWER).
[Green Button]
Ma n u fa ct u re r
Co d e
To turn On/Off
Sony
Panasonic
Mistubishi
701
704, 710
702
To search a chapter Press CH +/–.
forward or backward
To select a channel
To change channels
To record
Press the 0 – 9 buttons.
Press CH +/–.
Press ( while pressing r.
Press (.
Operating a DVD Player using the remote
control
DVD Pla ye r m a n u fa ct u re r co d e
n u m b e rs
To play
To stop
Press p.
To turn On/Off
Press DVD/VTR (POWER).
[Green Button]
To fast forward
To rewind the tape
To pause
Press ).
Ma n u fa ct u re r
Co d e
Press 0.
Sony
751
753
752
755
754
To play
To stop
To pause
Press (.
Press P. Press again to
Panasonic
Pioneer
RCA
Press p.
resume normal playback.
Press P. Press again to
Press ) or 0 during
playback. Release to
resume normal playback.
To search the
picture forward or
backward
resume normal playback.
Toshiba
To step through
different tracks of
an audio disc
Press ) to step forward or
0 to step backward.
Tips z
To change input
mode
Press TV/VTR.
•
•
In some rare cases, you may not be able to operate
To step through
different chapters
of a video disc
Press CH + to step forward
or CH – to step backward.
your non-Sony video equipment with the supplied
remote control. In this case, please use the
equipment' s own remote control.
Operating an MDP using the remote
control
When you remove the batteries, the code number may
revert to the factory setting.
To select tracks
directly
Press 0-9 buttons.
Press MENU.
To turn On/Off
Press DVD/VTR (POWER).
[Green Button]
To display the
menu (Set up)
To o p e ra t e vid e o e q u ip m e n t
1 Press DVD/ VTR (FUNCTION).
To play
To stop
To pause
Press (.
2 Use the VCR/ DVD/ MDP operation
Press p.
buttons indicated in the following tables.
Press P. Press again to
resume normal playback.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating a Cable Box or Satellite Receiver (SAT)
Ma n u fa ct u re r co d e n u m b e rs
(sa t e llit e re ce ive r)
To o p e ra t e t h e p ro je ct io n TV
Se t t in g t h e Ma n u fa ct u re r' s
Co d e
Press TV (FUNCTION). Then use the
projection TV control buttons to control the
projection TV.
Ma n u fa ct u re r
Co d e n u m b e r
You can program the supplied remote control
to operate a cable box or satellite receiver.
Sony
801 (preset code for
remote control)
802, 808
805
Press CODE SET, SAT/ CABLE
General Electric
Hitachi
Tips z
(FUNCTION), and the 0-9 buttons to enter
the manufacturer’s code number (see the
following chart), then press ENTER.
•
If more than one code number is listed, try entering
them one by one until you come to the correct code
for your equipment.
Hughes
804
803
802
Panasonic
RCA/PROSCAN
Toshiba
For example,to operate a Sony satellite receiver:
•
•
If you enter a new code number, the code number
you previously entered at that setting is erased.
806, 807
FUNCTION
SAT/CABLE
ENTER
CODE SET
8
0
1
To o p e ra t e t h e ca b le b o x o r
sa t e llit e re ce ive r (SAT)
In some rare cases, you may not be able to operate
your equipment with the supplied remote control. In
this case, use the equipment’s own remote control
unit.
Ma n u fa ct u re r co d e n u m b e rs
(ca b le b o x)
1 Press SAT/ CABLE (POWER) [Green
Button] to turn on/ off the cable box or
satellite receiver.
•
Whenever you remove the batteries — to replace
them, for example — if too much time is taken, the
code numbers may revert to the factory setting and
must be reset.
Co d e
Ma n u fa ct u re r
2 Press SAT/ CABLE (FUNCTION).
3 For other operations, refer to the
operating instructions that come with the
equipment.
222, 223, 224, 225, 226
201, 202, 203, 204, 205,
222, 206, 207, 208, 218
227, 228, 229
Hamlin/Regal
Jerrold/G.I
Oak
219, 220, 221
Panasonic
Pioneer
The GUIDE and INDEX (blue-labeled)
buttons can be used only with a satellite
receiver.
214, 215
209, 210, 211
Scientific Atlanta
Tocom
216, 217
212, 213
Zenith
If t h e re m o t e co n t ro l d o e sn ’t w o rk
•
Try repeating the set up procedures using
the other codes listed for your equipment.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If, after reading the following instructions, you have additional questions related to the use of your Sony projection TV, please call one of the following
numbers (English only).
Customers in the continental United States contact the Direct Response Center at: 1-800-222-SONY (7669)
Customers in Canada contact the Customer Relations Center at: (416) 499-SONY (7669)
The picture turns off and the
TIMER/STAND BY indicator on the
• The projection TV is equipped with a self-diagnosis function. If there is a problem with your projection TV, the TIMER/STAND BY indicator on the front
panel will flash repeatedly. Counting the number of flashes helps you inform qualified Sony personnel of the projection TV’s condition.
front panel flashes (self-diagnosis • Press POWER on the projection TV to turn it off, then inform qualified Sony personnel or the above Direct Response Center of the number of flashes.
function)
No picture (screen not lit), no
sound
• Make sure the power cord is plugged in.
• Operate with the buttons on both the projection TV and the remote control.
• Check to see if the TV/VIDEO setting is correct: when watching TV, set to TV, and when watching video tapes, set to VIDEO 1, 2, or 3.
• Try another channel. It could be station trouble.
• Perform AUTO SET UP again using the SET UP button to return to the factory preset condition. (see “To perform AUTO SET UP again” on page 19)
• The Parental Control feature is activated. (see “To deactivate the Parental Control feature” on page 37)
Remote control does not
operate
• Batteries could be weak. Replace the batteries.
• Press TV (FUNCTION) when operating your projection TV.
• Make sure the projection TV’s power cord is connected securely to the wall outlet.
• Locate the projection TV at least 3-4 feet away from fluorescent lights.
• Check the polarity of the batteries.
Dark, poor or no picture
(screen lit), good sound
• Adjust “Picture” in the Video menu. (see “Picture Adjustment” on page 26)
• Adjust “Brightness” in the Video menu. (see “Picture Adjustment” on page 26)
• Check antenna/cable connections.
• Perform AUTO SET UP again using the SET UP button to return to the factory preset condition. (see “To perform AUTO SET UP again” on page 19)
• Adjust the convergence again using the FLASH FOCUS button. (see “Adjusting the Convergence Automatically (FLASH FOCUS)” on page 19)
Good picture, no sound
• Press MUTING so that “Muting” disappears from the screen. (see “MUTING” on page 20)
• Check the MTS/SAP setting in the Audio menu. (see “MTS/SAP” on page 27)
• Make sure “Speaker” is set to “On” in the Audio menu. (see “Speaker” on page 28)
• Perform AUTO SET UP again using the SET UP button to return to the factory preset condition. (see “To perform AUTO SET UP again” on page 19)
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Cannot receive upper channels
(UHF) when using an antenna
• Make sure “Cable” is “Off” in the Channel Set Up menu. (see “Cable” on page 31)
• Use “Auto Program” to add receivable channels that are not presently in the TV’s memory. (see “Auto Program” on page 31)
No color
• Adjust “Color” in the Video menu. (see “Picture Adjustment” on page 26)
• Black and white programs cannot be seen in color.
• Perform AUTO SET UP again using the SET UP button to return to the factory preset condition. (see “To perform AUTO SET UP again” on page 19)
Only snow and noise appear on
the screen
• Check the “Cable” setting in the Channel Set Up menu. (see “Cable” on page 31)
• Check the antenna/cable connections.
• Make sure the channel is broadcasting programs.
• Press ANT to change the input mode. (see “ANT” on page 22)
Dotted lines or stripes
• Adjust the antenna.
• Keep the projection TV away from noise sources such as cars, neon signs or hair-dryers.
TV is fixed to one channel
Double images or ghosts
Cannot operate the menu
• Use “Auto Program” to add receivable channels that are not presently in TV’s memory. (see “Auto Program” on page 31)
• Use a highly directional outdoor antenna or a cable (when the problem is caused by reflections from nearby mountains or tall buildings).
• If the item you want to choose appears in gray, you cannot select it.
• Press the projection TV’s power button off and on again.
Cannot receive any channels
when using cable TV
• Make sure “Cable” is “On” in the Channel Set Up menu. (see “Cable” on page 31)
• Use “Auto Program” to add receivable channels that are not presently in the TV’s memory. (see “Auto Program” on page 31)
Cannot gain enough volume when • Increase the volume at the cable box. Then press TV (FUNCTION) and adjust the projection TV’s volume.
using a cable box
Favorite Channel does not display • Verify that “Favorite Channel” is set to “Manual” in the Channel Set Up menu. (see “Setting Favorite Channel manually” on page 32)
your choices
Some video sources do not
• Ensure that “Video Label” is not set to “Skip.” (see “Video Label” on page 35)
appear when you press TV/VIDEO
Recording through MONITOR OUT • MONITOR OUT will not record both images in PIP. Only the main picture will be recorded.
does not function properly when
recording in PIP mode
• If you are recording the main picture and you switch to the sound of the sub picture using the AUDIO button, the main picture will be recorded with sound
from the other program.
Cannot play shooting games
• Some shooting games which involve pointing a light beam at the TV screen with an electronic gun or rifle cannot be used with this projection TV. For
details, see the instruction manual supplied with the video game software.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
VIDEO 3 IN
Pro je ct io n syst e m
Dim e n sio n s (W/H/D)
5
1
S VIDEO IN (4-pin mini DIN):
Y: 1 Vp-p, 75-ohms unbalanced, sync negative
C: 0.286 Vp-p (Burst signal), 75 ohms
VIDEO (phono jack): 1 Vp-p, 75-ohms
unbalanced, sync negative
Y: 1 Vp-p, 75 ohms, sync negative
PB: 0.7 Vp-p, 75 ohms
PR: 0.7 Vp-p, 75 ohms
3 picture tubes, 3 lenses, horizontal in-line
system
Pict u re t u b e
7-inch high-brightness monochrome tubes (6.3
raster size), with optical coupling and liquid
cooling system
Pro je ct io n le n se s
High performance, large diameter hybrid lens
F1.05
Te le visio n syst e m
American TV standard
965 × 1,058 × 510 mm (38 × 41 / 8 × 20 / 8 inches)
(KP-43T75)
1
5
3
1,105 × 1,338 × 579 mm (43 / 2 × 52 / 8 × 22 / 4
inches) (KP-48S75)
7
3
7
1,216 × 1,417 × 632 mm (47 / 8 × 55 / 4 × 24 / 8
inches) (KP-53S75)
7
3
7
1,216 × 1,417 × 632 mm (47 / 8 × 55 / 4 × 24 / 8
inches) (KP-53N77)
3
3
AUDIO (phono jacks): 500 mVrms (100%
modulation), Impedance: 47 kilohms
MONITOR OUT
1,370 × 1,560 × 670 mm (54 × 61 / 8 × 26 / 8
inches) (KP-61S75)
Ma ss
VIDEO (phono jack): 1 Vp-p, 75-ohms
unbalanced, sync negative
Ch a n n e l co ve ra g e
VHF: 2–13/ UHF: 14 –69/ CATV: 1 – 125
An t e n n a
75 ohm external terminal for VHF/ UHF
Scre e n size (m e a su re d d ia g o n a lly)
43 inches (KP-43T75)
48 inches (KP-48S75)
53 inches (KP-53S75/ 53N77)
61 inches (KP-61S75)
In p u t s/o u t p u t s
VIDEO 1 IN
64.6 kg (142 lbs 5 oz) (KP-43T75)
64 kg (141 lbs 2 oz) (KP-48S75)
67.6 kg (149 lbs) (KP-53S75)
75.2 kg (165 lbs 13 oz) (KP-53N77)
84.6 kg (186 lbs 8 oz) (KP-61S75)
Su p p lie d a cce sso rie s
Remote control RM-Y906 (1)
Batteries (2) size AA (R6)
Op t io n a l a cce sso rie s
AUDIO (phono jacks): 500 mVrms (100%
modulation), Impedance: 470 ohms
AUDIO (VAR/FIX) OUT (phono jacks): 500
mVrms (100% modulation), Impedance: 470
ohms
CONTROL S OUT: minijack
Sp e a ke r
5
Tweeter: 66 mm (2 / 8”) × 2 (KP-53N77)
Woofer:
130 mm (5 / 8”) × 2 (KP-53N77)
100 mm (4”) × 2 (KP-43T75/ 48S75/ 53S75/
61S75)
Connecting cables
RK-G34, RK-74A, RK-G69HG, VMC-10HG,
VMC-720M, VMC-810S/ 820S, YC-15V/ 30V
U/ V mixer EAC-66
1
VIDEO 2 INPUT
S VIDEO IN (4-pin mini DIN):
Y: 1 Vp-p, 75-ohms unbalanced, sync negative
C: 0.286 Vp-p (Burst signal), 75 ohms
VIDEO (phono jack): 1 Vp-p, 75-ohms
unbalanced, sync negative
AUDIO (phono jacks): 500 mVrms (100%
modulation), Impedance: 47 kilohms
Sp e a ke r o u t p u t
Design and specifications are subject to change
without notice.
17W × 2 (KP-43T75/ 48S75/ 53S75/ 61S75)
20 W × 2 (KP-53N77)
Po w e r re q u ire m e n t
120 V AC, 60 Hz
Po w e r co n su m p t io n
In use (Max.): 160 W
In standby: 1 W
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
ch
Channel Set Up menu operations
Mode ............................................. 20, 26
(Vivid/ Standard/ Movie/
Personal 1/ Personal 2)
Movie rating ...................................... 40
MTS/ SAP ..................................... 22, 27
(Stereo/ SAP/ Mono)
A
E
.................................................. 30, 31
Channel Skip/ Add ........................... 31
Coaxial cable ........................ 8, 9, 10, 12
Color ................................................... 26
Connecting Projection TV to
antenna ............................................ 8
audio system ................................ 16
cable ................................................. 8
cable box .......................................... 9
cable box and VCR ...................... 10
camcorder ..................................... 13
DTV receiver ................................. 13
DVD Player ................................... 15
satellite receiver (SAT) ................ 11
satellite receiver (SAT) and
Adjusting sliders ......................... 26, 27
ANT button ................................. 22, 24
Antenna cable ...................................... 9
Antenna connector ............................. 8
Editing using MONITOR OUT....... 14
Effect ................................................... 27
(BBE/ Surround/ Simulated/ Off )
F, G
Audio
button ............................... 22
Factory settings ........................... 26, 27
Favorite Channel
Selecting ........................................ 33
Setting ............................................ 32
FLASH FOCUS ........................... 19, 35
FREEZE button ........................... 21, 24
MUTING button ............................... 20
Audio menu operations ........ 27, 28
Audio Out .......................................... 28
(Fixed/ Variable)
Audio/ Video cable ............................. 8
Auto Program ............................. 19, 31
AUTO SET UP ................................... 18
Auto Volume ..................................... 27
AUX Hookup ................................ 9, 24
N
Noise Reduction ................................ 26
O
On/ Off Timer .................................... 29
Operating video equipment ............ 47
H, I
Hook Ups ............................................. 8
Hue ..................................................... 26
P, Q
Parental Control .......................... 34, 36
Parental Control menu
B
J, K
Balance ............................................... 27
Bass ..................................................... 27
Battery installation ........................... 18
Brightness .......................................... 26
VCR.............................................. 12
Sony SAVA series speaker
Change Password ........................ 42
Country ......................................... 36
Custom Rating ....................... 38, 41
Parental Lock .......................... 36, 37
Rating ............................................ 37
Password ............................................ 36
Picture ................................................ 26
Picture Adjustment .......................... 26
(Picture/ Brightness/ Color/ Hue/
Sharpness)
Picture-in-Picture (PIP) .................... 23
PICTURE MODE button .................. 20
PIP operations
ACTIVE B/ b ................................ 23
AUDIO .......................................... 24
JUMP button ...................................... 21
L
system .......................................... 17
two VCRs ...................................... 14
VCR ................................................ 10
CONTROL S OUT jack ...................... 8
Convergence ...................................... 19
Current Time ..................................... 29
Language ........................................... 34
Learning menus
C
Audio ............................................. 27
Channel Set Up ............................ 30
Set Up ............................................ 34
Timer ............................................. 29
Video ............................................. 26
Cable ................................................... 31
Cable box
connection ................................. 9, 10
operation ....................................... 49
Caption Vision CC ..................... 22, 34
CATV cable .......................................... 9
CH +/ – ......................................... 20, 24
CHANNEL +/ – .......................... 18, 19
Channel Caption ............................... 30
D
Daylight Savings ............................... 29
DISPLAY button ............................... 21
DVD
connection ..................................... 15
operation ....................................... 48
DVD/ VTR (FUNCTION) ................ 48
M
Manufacturer code numbers ...... 47-49
MDP operation .................................. 48
MENU button .................................... 25
Menu selection .................................. 25
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Index (continued)
CH+/ – ........................................... 24 Sharpness ........................................... 26
FREEZE ......................................... 24 Skip/ Add ........................................... 31
PIP .................................................. 23 SLEEP button .................................... 22
POSITION ..................................... 23 Sliders ........................................... 26, 27
SWAP ............................................ 24 Speaker ............................................... 28
V, W
VCR
connection ......................... 10, 12, 14
operation ....................................... 48
Video Label ........................................ 35
TV/ VIDEO ................................... 23
(On/ Off/ SAVA SP)
Video menu operations
.............. 26
Specifications ..................................... 52
Splitter ................................................ 10
SYSTEM OFF button ........................ 22
Surround ............................................ 27
SWAP button ..................................... 24
VOL +/ – ............................................. 20
VOLUME +/ – ............................. 18, 19
R
Remote control .................................. 18
Graphic Illustration ... (inside cover)
RESET button .............................. 26, 27
X
XDS ..................................................... 22
S
Y, Z
T, U
S Video cable ....................................... 8
Safety .................................................... 2
SAP ..................................................... 27
SAT/ CABLE (FUNCTION) ............ 49
Satellite receiver (SAT) operation ... 49
SET UP button ................................... 19
Y/ PB/ PR ....................................... 11, 15
Timer menu operations
............. 29
Treble .................................................. 27
Troubleshooting .......................... 50, 51
TV (FUNCTION) button .................. 20
TV POWER button ........................... 20
TV rating ............................................ 39
TV/ VIDEO button ...................... 21, 23
TV/ VTR button ................................ 22
Set Up menu operations
Setting Up the Projection TV
....... 34, 35
Automatically ............................... 18
If, after reading this instruction manual, you
have additional questions related to the use of
your Sony projection TV, please call one of the
following numbers (English only).
Customers in the continental United States
contact the Direct Response Center at:
1-800-222-SONY (7669)
Customers in Canada contact the
Customer Relations Center at:
(416) 499-SONY (7669)
Printed in U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|