Sony MiniDisc Player MZ NH1 User Manual
MZ-NH1  
SERVICE MANUAL  
US Model  
AEP Model  
Ver 1.1 2004.09  
UK Model  
E Model  
Australian Model  
Chinese Model  
Tourist Model  
Model Name Using Similar Mechanism  
NEW  
US and foreign patents licensed from Dolby  
Laboratories.  
MD Mechanism Type  
Optical Pick-up Name  
MT-MZNH1-181  
ABX-U  
•
•
SonicStage and SonicStage logo are trademarks or registered trademarks of Sony Corporation.  
MD Simple Burner, OpenMG, “MagicGate”, “MagicGate Memory Stick”, “Memory Stick”, Hi-  
MD, Net MD,ATRAC,ATRAC3,ATRAC3plus and their logos are trademarks of Sony Corporation.  
Microsoft, Windows, Windows NT and Windows Media are trademarks or registered trademarks  
of Microsoft Corporation in the United States and/or other countries.  
•
•
•
•
•
IBM and PC/AT are registered trademarks of International Business Machines Corporation.  
Macintosh is a trademark of Apple Computer, Inc. in the United States and/or other countries.  
Pentium is a trademark or registered trademark of Intel Corporation.  
All other trademarks and registered trademarks are trademarks or registered trademarks of their  
respective holders.  
SPECIFICATIONS  
MD:  
ATRAC  
ATRAC3 — LP2/LP4  
Modulation system  
Hi-MD:  
1-7RLL (Run Length Limited)/PRML  
(Partial Response Maximum Likelihood)  
MD:  
EFM (Eight to Fourteen Modulation)  
Frequency response  
20 to 20,000 Hz 3 dB  
The recorder:  
Audio playing system  
MiniDisc digital audio system  
Laser diode properties  
Material: GaAlAs  
Lithium-ion rechargeable battery  
LIP-4WM, 3.7 V, 370 mAh, Li-ion  
Battery charging stand:  
AC power adaptor DC 6V  
Operating temperature  
+5°C (+41°F) to +35° C (+95°F)  
Wavelength: λ = 790 nm  
Emission duration: continuous  
Laser output: less than 44.6 µW  
(This output is the value measured at a distance  
of 200 mm from the lens surface on the optical  
pick-up block with 7 mm aperture.)  
Recording and playback time (Refer  
to page 94 for details)  
When using HMD1G (1GB disc):  
Maximum 34 hours in Hi-LP stereo  
When using MDW-80 in Hi-MD mode:  
Maximum 10 hours and 10 min. in Hi-LP  
stereo  
Battery life 4)  
Hi-MD mode (When using a 1GB Hi-  
MD disc)  
Inputs1)  
MIC: stereo mini-jack  
(Unit: approx.hours)(JEITA3)  
)
When  
Linear Hi-SP Hi-LP  
PCM  
(minimum input level 0.13 mV)  
Line in:  
stereo mini-jack for analog input  
(minimum input level 49 mV)  
optical (digital) mini-jack for optical  
(digital) input  
Recording  
continuously  
6
8.5  
9.5  
When using MDW-80 in MD mode:  
Maximum 160 min. in monaural  
Maximum 320 min. in LP4 stereo  
Revolutions  
350 rpm to 3,600 rpm (CLV)  
Error correction  
Playing  
continuously  
10  
15.5  
18  
Outputs  
i/LINE OUT2): stereo mini-jack (dedicated  
emote control jack)/194 mV (10 kΩ)  
Maximum output (DC)2)  
Headphones:  
Hi-MD mode (When using a 60/74/80-  
minute standard disc)  
(Unit: approx.hours)(JEITA)  
Hi-MD:  
When  
Linear Hi-SP Hi-LP  
PCM  
LDC (Long Distance Code)/BIS (Burst  
Indicator Subcode)  
MD:  
ACIRC (Advanced Cross Interleave Reed  
Solomon Code)  
Sampling frequency  
44.1 kHz  
Sampling rate converter  
Input: 32 kHz/44.1 kHz/48 kHz  
Coding  
5 mW + 5 mW (16 Ω)  
Power requirements  
Sony AC Power Adaptor connected at the DC  
IN 6V jack:  
Recording  
continuously  
5
8
9
120 V AC, 60 Hz (Models for USA, Canada,  
Mexico, and Taiwan)  
240 V AC, 50 Hz (Model for Australia)  
230 V AC, 50 Hz (Models for U.K. and  
Hong Kong)  
Playing  
continuously  
8
14.5  
17.5  
220 V AC, 50 Hz (Model for China)  
100 - 240 V AC, 50/60 Hz (Other models)  
– Continued on next page –  
Hi-MD:  
Linear PCM (44.1 kHz/16 bit) — PCM  
ATRAC3plus (Adaptive TRansform  
Acoustic Coding 3 plus)  
PORTABLE MINIDISC RECORDER  
Sony Corporation  
Personal Audio Company  
9-879-075-02  
2004I05-1  
© 2004.09  
Published by Sony Engineering Corporation  
For other Service and User Manuals, go to www.ManualDepot.com  
MZ-NH1  
TABLE OF CONTENTS  
CAUTION  
Use of controls or adjustments or performance of procedures  
other than those specified herein may result in hazardous radiation  
exposure.  
1. SERVICING NOTES ...............................................  
4
5
2.  
GENERAL ...................................................................  
Notes on chip component replacement  
• Never reuse a disconnected chip component.  
• Notice that the minus side of a tantalum capacitor may be  
damaged by heat.  
3. DISASSEMBLY  
3-1. Disassembly Flow ...........................................................  
3-2. Bottom Panel Sub Assy ...................................................  
3-3. MAIN Board....................................................................  
3-4. Upper Panel Sub Assy .....................................................  
3-5. Control Ornament Block .................................................  
3-6. Mechanism Deck Assy (MT-MZNH1-181) ....................  
3-7. Gear (SA), Gear (SB) ...................................................... 10  
3-8. Op Service Assy .............................................................. 10  
3-9. DC SSM18D/C-NP Motor (Spindle) (M701),  
7
7
8
8
9
9
Flexible Circuit Board Repairing  
• Keep the temperature of the soldering iron around 270 ˚C  
during repairing.  
• Do not touch the soldering iron on the same conductor of the  
circuit board (within 3 times).  
• Be careful not to apply force on the conductor when soldering  
or unsoldering.  
DC SSM21A/C-NP Motor (Sled) (M702),  
DC Motor Unit (Over Write Head Up/Down) (M703) ... 11  
3-10. Holder Assy ..................................................................... 11  
4. TEST MODE ............................................................... 12  
5. ELECTRICAL ADJUSTMENT ............................. 16  
6. DIAGRAMS  
6-1. Block Diagram –MD SERVO Section – ......................... 21  
6-2. Block Diagram –AUDIO Section – ................................. 22  
6-3. Block Diagram –POWER SUPPLY Section – ................ 23  
6-4. Schematic Diagram –MAIN Section (1/9) – ................... 25  
6-5. Schematic Diagram –MAIN Section (2/9) – ................... 26  
6-6. Schematic Diagram –MAIN Section (3/9) – ................... 27  
6-7. Schematic Diagram –MAIN Section (4/9) – ................... 28  
6-8. Schematic Diagram –MAIN Section (5/9) – ................... 29  
6-9. Schematic Diagram –MAIN Section (6/9) – ................... 30  
6-10. Schematic Diagram –MAIN Section (7/9) – ................... 31  
6-11. Schematic Diagram –MAIN Section (8/9) – ................... 32  
6-12. Schematic Diagram –MAIN Section (9/9) – ................... 33  
6-13. Printed Wiring Board –MAIN Section (1/2) – ................ 34  
6-14. Printed Wiring Board –MAIN Section (2/2) – ................ 35  
7. EXPLODED VIEWS  
7-1. PANEL SECTION........................................................... 49  
7-2. MAIN SECTION ............................................................ 50  
7-3. MECHANISM DECK SECTION ................................... 51  
8. ELECTRICAL PARTS LIST................................ 52  
SAFETY-RELATED COMPONENT WARNING!!  
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE  
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN  
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.  
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE  
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR  
IN SUPPLEMENTS PUBLISHED BY SONY.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
SECTION 1  
SERVICING NOTES  
NOTES ON HANDLING THE OPTICAL PICK-UP  
BLOCK OR BASE UNIT  
Installing  
The laser diode in the optical pick-up block may suffer electrostatic  
break-down because of the potential difference generated by the  
charged electrostatic load, etc. on clothing and the human body.  
During repair, pay attention to electrostatic break-down and also  
use the procedure in the printed matter which is included in the  
repair parts.  
Providing the required system environment  
System requirements  
The following system environment is required in order to use the SonicStage/MD Simple  
Burner software for the MD Walkman.  
Computer  
IBM PC/AT or Compatible  
The flexible board is easily damaged and should be handled with  
care.  
CPU: Pentium II 400 MHz or higher (Pentium III 450 MHz or higher  
is recommended.)  
Hard disk drive space: 200 MB or more (1.5 GB or more is  
recommended) (The amount space will vary according to Windows  
version and the number of music files stored on the hard disk.)  
RAM: 64 MB or more (128 MB or more is recommended)  
NOTES ON LASER DIODE EMISSION CHECK  
The laser beam on this model is concentrated so as to be focused on  
the disc reflective surface by the objective lens in the optical pick-  
up block. Therefore, when checking the laser diode emission,  
observe from more than 30 cm away from the objective lens.  
Others  
CD drive (capable of digital playback by WDM)  
Sound Board  
USB port (supports USB (previously USB 1.1))  
Operating  
System  
Factory installed:  
Windows XP Media Center Edition 2004/Windows XP Media Center  
Edition/Windows XP Professional/Windows XP Home Edition/  
Windows 2000 Professional/Windows Millennium Edition/Windows  
98 Second Edition  
UNLEADED SOLDER  
Boards requiring use of unleaded solder are printed with the lead-  
free mark (LF) indicating the solder contains no lead.  
(Caution: Some printed circuit boards may not come printed with  
the lead free mark due to their particular size)  
Display  
Others  
High Color (16bit) or higher, 800 × 600 dots or better (1024 × 768 dots  
or better is recommended)  
Internet access: for Web registration, EMD services and CDDB  
Windows Media Player (version 7.0 or higher) installed for playing  
WMA files  
This software is not supported by the following environments:  
: LEAD FREE MARK  
OSs other than the indicated above  
Personally constructed PCs or operating systems  
An environment that is an upgrade of the original manufacturer-installed operating system  
Multi-boot environment  
Multi-monitor environment  
Macintosh  
Unleaded solder has the following characteristics.  
• Unleaded solder melts at a temperature about 40 °C higher  
than ordinary solder.  
Ordinary soldering irons can be used but the iron tip has to be  
applied to the solder joint for a slightly longer time.  
Soldering irons using a temperature regulator should be set to  
about 350 °C.  
Notes  
We do not ensure trouble-free operation on all computers that satisfy the system requirements.  
The NTFS format of Windows XP/Windows 2000 Professional can be used only with the standard  
(factory) settings.  
We do not ensure trouble-free operation of the system suspend, sleep, or hibernation function on all  
computers.  
For Windows 2000 Professional users, install Service Pack 3 or later version before using the  
software.  
Caution: The printed pattern (copper foil) may peel away if  
the heated tip is applied for too long, so be careful!  
• Strong viscosity  
Unleaded solder is more viscou-s (sticky, less prone to flow)  
than ordinary solder so use caution not to let solder bridges  
occur such as on IC pins, etc.  
OPERATION CHECK WHEN THE MAIN BOARD IS  
REMOVED  
In making an operation check with the MAIN Board removed from  
the set, short the SL894 (OPEN/CLOSE) of the MAIN Board with  
the solder before starting the operation check.  
Note: Be sure to remove the solder used for shortcircuit after the repaire  
completed.  
• Usable with ordinary solder  
It is best to use only unleaded solder but unleaded solder may  
also be added to ordinary solder.  
– MAIN Board (Conductor Side) –  
SL894  
(OPEN/CLOSE)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
SECTION 2  
GENERAL  
This section is extracted from  
instruction manual.  
Looking at controls  
The recorder  
F MENU button  
A x (stop) • CANCEL button  
B Display window  
1
9
0
qa  
qs  
qd  
G GROUP button  
2
H T MARK button  
C OPEN switch  
I X (pause) button  
D Battery compartment  
E 5-way control key  
J zREC (record) switch/lamp  
K LINE IN (OPT) jack  
3
4
L MIC (PLUG IN POWER) jack  
There is a tactile dot beside the MIC  
(PLUG IN POWER) jack.  
qf  
qh  
qg  
M i (headphones/earphones)/LINE  
5
6
7
8
OUT jack  
N USB connecting jack  
Operation  
Function  
O HOLD switch (at the rear)  
Slide the switch in the direction of the  
arrow to disable the buttons on the  
recorder. To prevent the buttons from  
being accidentally operated when you  
carry the recorder, use this function.  
Press NENT play, enter  
1)  
Press towards find the beginning  
FR  
of the previous  
track, rewind  
Press towards find the beginning  
P CHG (Charge) lamp  
FF  
of the next track,  
fast forward  
Press towards volume  
VOL +1) or  
VOL –.  
1) There are tactile dots beside the  
N
ENT and VOL + buttons.  
The display window of the recorder  
9
qa  
1
2
3
4
5
6
7
8
0
A Disc indication  
F Hi-MD/MD indication  
“Hi-MD” lights up when the  
Shows that the disc is rotating for  
recording or playing.  
operation mode of the recorder is in  
Hi-MD mode and “MD” lights up  
when the operation mode is in MD  
mode.  
B Battery indication  
Shows the approximate remaining  
battery power. If the rechargeable  
battery is weak, the indication  
G Track number display  
becomes empty and starts flashing.  
H “R” (Remain) indication  
Lights up when remaining recordable  
time is displayed.  
C SYNC (synchro-recording) indication  
D REC indication  
Lights up during recording or file  
transfers from the computer. When  
flashing, the recorder is in record  
standby mode.  
I Character information display  
Displays the menu items, date, error  
messages, etc.  
J Track mode (PCM, Hi-SP, Hi-LP, SP,  
E Group indication  
LP2, LP4, MONO) indication  
r
K Level mete  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
The headphones/earphones with a remote control  
Using the clip for the remote control  
1
It may be hard for you to read the indications in the display if the remote  
control is attached upside down with the clip in its current position.  
In this case, turn the clip in the opposite direction until it attaches firmly,  
as shown below.  
6
2
3
7
8
9
0
4
5
A Display window  
F HOLD switch  
Slide the switch in the direction of the  
arrow (a yellow mark appears) to  
disable the buttons on the remote  
control. To prevent the buttons from  
being accidentally operated when you  
carry the recorder, use this function.  
B Jog lever (NX • ENTER, .,  
>)  
Operation  
Function  
Press NX • play, pause, enter  
ENTER  
G •DISPLAY, BACKLIGHT button*  
H •P-MODE, REPEAT button*  
I •SOUND, SOUND SET button*  
Slide towards cue to the beginning of  
.
the previous track,  
rewind  
.
Slide towards cue to the beginning of  
J Jog dial (•NAVI/ MENU/ENTER)*  
>
the next track, fast  
forward  
* • indicates a function that requires a slight  
C Clip  
press of the button.  
indicates a function  
D x (stop) • CANCEL button  
E VOL +, – buttons  
that requires pressing the button for 2 seconds  
or more.  
The display window of the remote control  
1
2
3
4
A Character information display  
C Disc indication  
B Battery level indication  
D SND (sound), SUR (surround)  
indications  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
SECTION 3  
DISASSEMBLY  
• This set can be disassembled in the order shown below.  
3-1. DISASSEMBLY FLOW  
Note 1: The process described in can be performed in any order.  
Note 2: Without completing the process described in , the next process can not be performed.  
SET  
3-2. BOTTOM PANEL SUB ASSY  
(Page 7)  
3-3. MAIN BOARD  
(Page 8)  
3-4. UPPER PANEL SUB ASSY  
(Page 8)  
3-5. CONTROL ORNAMENT BLOCK  
(Page 9)  
3-6. MECHANISM DECK ASSY (MT-MZNH1-181)  
(Page 9)  
3-7. GEAR (SA), GEAR (SB)  
(Page 10)  
3-8. OP SERVICE ASSY  
(Page 10)  
3-9. DC SSM18D/C-NP MOTOR (SPINDLE) (M701),  
DC SSM21A/C-NP MOTOR (SLED) (M702),  
DC MOTOR UNIT(OVER WRITE HEAD UP/DOWN) (M703)  
(Page 11)  
3-10. HOLDER ASSY  
(Page 11)  
Note: Follow the disassembly procedure in the numerical order given.  
3-2. BOTTOM PANEL SUB ASSY  
S895  
Note: When installing the bottom panel  
sub assy, adjust the position of  
switch (S895) and knob (hold).  
1 two screws  
(M1.4) L=1.6  
3 bottom panel sub assy  
knob (hold)  
2 two screws  
(M1.4) L=1.6  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
3-3. MAIN BOARD  
4 two flexible boards  
(CN471, 701)  
2 Remove two solders.  
q; MAIN board  
3 flexible cable  
4 flexible board  
9 leaf spring  
(CN491)  
(EMC) (2)  
8 toothed lock screw  
5 three toothed lock  
screws (M1.4)  
(M1.4)  
4 flexible board  
(CN501)  
7 leaf spring  
6 toothed lock screws (M1.4)  
(EMC) (1)  
1 sheet (shield A)  
3-4. UPPER PANEL SUB ASSY  
4 two screws  
(M1.4) L=1.6  
5 two screws (M1.4) L=1.6  
6 upper panel sub assy  
3 screw (M1.4) L=3.0  
B
1 flexible board  
(CN471)  
A
2 Slide the lever (lock) in the direction of arrow A,  
and open the upper panel sub assy in the direction of arrow B.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
3-5. CONTROL ORNAMENT BLOCK  
4 two claws  
7 flexible board  
(CN491)  
4 claw  
6
5 claw  
8 control ornament block  
2 battery case lid.  
A
3 two screws  
(M1.4) L=2.5  
1 Open the battery case lid.  
3-6. MECHANISM DECK ASSY  
(MT-MZNH1-181)  
1 two step screws  
(MD)  
2 mechanism deck assy  
(MT-MZNH1-181)  
3 battery case  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
3-7. GEAR (BSA), GEAR (SB)  
1 self tap screw  
2 thrust retainer spring  
3 washer (0.8-2.5)  
4 gear (SA)  
5 gear (SB)  
3-8. OP SERVICE ASSY  
1 Lead screw block assy is turned  
and it removes from OP service assy.  
2 OP service assy  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
3-9. DC SSM18D/C-NP MOTOR (SPINDLE) (M701), DC SSM21A/C-NP MOTOR (SLED) (M702),  
DC MOTOR UNIT (OVER WRITE HEAD UP/DOWN) (M703)  
3 two screws (M1.4)  
4 DC SSM21A/C-NP motor (sled)  
(M702)  
2 Remove two solders of flexible board.  
1 Remove four solders of flexible board.  
8 self tap screw  
6 three self tap screws  
9 DC motor unit  
(over write head up/down)  
(M703)  
7 DC SSM18D/C-NP motor  
(spindle) (M701)  
5 motor base assy  
3-10. HOLDER ASSY  
4 Remove the holder assy  
to the direction of the arrow A.  
2 boss  
3 Open the holder assy.  
1 boss  
A
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
SECTION 4  
TEST MODE  
2. OPERATION IN SETTING THE TEST MODE  
OUTLINE  
•
When the test mode becomes active, first the Display Check  
mode is selected.  
A key having no particular description in the text, indicates a set  
key.  
•
•
Other mode can be selected from the Display Check mode.  
When the test mode is set, the LCD repeats the following  
display.  
1. ENTERING THE TEST MODE  
Preparation:  
•
When the x key is pressed and hold down, the display at that  
time is held so that display can be checked.  
Copy the “TestMode_Enter_For_NH1_NH3D_Ver***.exe” folder  
of the PC application of the latest version to your PC in advance.  
(operating system: Windows 2000, Windows XP)  
Also, when using this application, the SonicStage Ver. 2.0 or 2.1 is  
necessary, and install it in your PC in advance.  
Display check mode:  
• Display of the main unit  
Procedure:  
All lit  
1. If a Simple Burner has run on the PC, finish it (including the  
one that is resident in the task tray).  
2. Start the “TestMode_Enter_For_NH1_NH3D_Ver***.exe”.  
3. Insert the fully charged lithium-ion battery (LIP-4WM).  
4. Open and close the top panel of the main unit to wait until the  
system reading finished.  
All off  
5. Connect the main unit and PC by USB cable.  
6. Check by device manager screen from property of “My  
computer” that the set is recognised to your PC normally.  
7. Click the [Enter TestMode] button on the screen of application  
8. Disconnect the USB cable, when “OK” message is displayed  
on the application screen.  
Microcomputer  
version display  
Ver *.***  
9. Remove the lithium-ion battery.  
•
Display of the remote commander  
All lit  
All off  
Screen of the PC application “TestMode_Enter_For_NH1_NH3D_  
Ver***.exe”  
(“***” is version number)  
Microcomputer  
version  
001  
Ver *.***  
display  
Note: Once the test mode is activated with this application, the test mode  
is then activated forcibly by only turning on the power.  
After the repair completed, be sure to release the test mode by using  
this application once more.  
3. RELEASING THE TEST MODE  
Procedure:  
1. If a Simple Burner has run on the PC, finish it (including the  
one that is resident in the task tray).  
2. Start the “TestMode_Enter_For_NH1_NH3D_Ver***.exe”.  
3. Insert the fully charged lithium-ion battery (LIP-4WM).  
4. Open and close the top panel of the main unit to wait until the  
system reading finished.  
5. Connect the main unit and PC by USB cable.  
6. Check by device manager screen that the set is recognised to  
your PC normally.  
7. Click the [Exit TestMode] button on the screen of application  
8. Disconnect the USB cable, when “OK” message is displayed  
on the application screen.  
9. Remove the lithium-ion battery.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
4. CONFIGURATION OF THE TEST MODE  
5. MANUAL MODE  
This is mode to adjust or check the operation of the set by function.  
Flow of the test mode:  
Operation of The Manual Mode  
Display Check Mode  
1. Enter the test mode (Display Check mode).  
2. Press the [VOL+] key to activate the Manual mode where the  
LCD displays as shown below.  
001  
Version display → All lit  
→ All off → Version display...  
Ver *.***  
Display of the remote commander  
Manual Mode  
000  
000  
[VOL +] key  
Manual  
Manual  
x key  
Number of 1000th place  
(000 to 009)  
Overall Adjustment Mode  
[VOL --] key  
key  
000  
3. During each test, the optical pick-up moves outward or inward  
while the [FF] or [FR] key is pressed for several seconds  
respectively.  
AdjF**  
x
4. Each test item is assigned with a four-digit item number; 1000th  
place is a top item, 100th place is a major item, 10th place is a  
medium item, and unit place is a minor item.  
The values adjusted in the test mode are written to the non-  
volatile memory (for the items where adjustment was made).  
5. To quit the Manual mode, press the x key and return to the  
Display Check mode.  
Key Check Mode  
000  
[GROUP] key  
10  
Open the lid  
Self-Diagnosis Result Display Mode  
[FF] key  
000  
1 0000  
Flow of manual mode operation:  
x key  
[VOL +] key: 1000th place of item  
Top item switching  
number increase.  
Sound Skip Check Result  
Display Mode (Play)  
[VOL --] key: 1000th place of item  
[FF] key  
x key  
number decrease.  
000  
N
ENT key  
[VOL +] key: 100th place of item  
P00r00  
Major item switching  
[FF] key  
number increase.  
x key  
[VOL --] key: 100th place of item  
x key  
number decrease.  
Sound Skip Check Result  
Display Mode (REC)  
[VOL +] key: 10th place of item  
Medium item switching  
[FF] key  
000  
[T MARK] key  
number increase.  
p00R00  
[VOL --] key: 10th place of item  
x key  
number decrease.  
x key  
Key Count Mode  
[FF] key:  
1st place of item  
number increase.  
Minor item switching  
000  
[MENU] key  
[FR] key:  
1st place of item  
number decrease.  
MENU 000  
[FF] or [FR] key  
(press a few seconds)  
Adjusted value variation  
[VOL +] key: Increases the adjusted  
(Not used in servicing)  
value.  
[VOL --] key: Decreases the adjusted  
value.  
Adjusted value write  
X key: Adjusted value is written.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
6. OVERALL ADJUSTMENT MODE  
6-2. Error Message in The Overall Adjustment Mode  
In the Overall Adjustment mode, if an error occurred, it displays as  
following table.  
6-1. Operation of The Overall Adjustment Mode  
1. Enter the test mode (Display Check mode).  
2. Press the [VOL--] key to activate the OverallAdjustment mode  
where the LCD displays as shown below.  
Display  
Close!  
Description  
Dose not close the lid  
Display of the remote commander  
DfDis!  
Unsuitableness disc was inserted  
NoChg!  
NoTmp!  
NotCD!  
Does not finish the check of charge function yet  
Does not setting the temperature correction value  
Does not complete the CD Overall adjustment beforethe  
MD1 Overall adjustment  
000  
AdjF**  
NotM1!  
NotH3!  
Does not complete the MD1 Overall adjustment  
before the Hi-MD3 Overall adjustment  
Disc mark:  
Lit the inner segments: Completed the power supply adjustment.  
Lit the outer segments: Completed the check of charge function.  
“**”:  
Does not complete the Hi-MD3 Overall adjustment  
before the Stray Light Offset Overall adjustment  
If “DF” or “FF” is displayed, it mean that completed the servo  
overall adjustment.  
****NG Error of item number “****”  
3. To quit the Overall Adjustment mode, press the x key and  
return to the Display Check mode.  
7. SELF-DIAGNOSIS RESULT DISPLAY MODE  
This set uses the self-diagnostic function system in which if an error  
occurred during the recording or playing, the mechanism control  
block and the power supply control block in the microcomputer  
detect it and record its cause as history in the nonvolatile memory.  
By checking this history in the test mode, you can analyze a fault  
and determine its location.  
Flow of overall adjustment mode:  
Overall Adjustment Mode  
000  
AdjF**  
Total recording time is recorded as a guideline of how long the  
optical pick-up has been used, and by comparing it with the total  
recording time at the time when an error occurred in the self-  
diagnosis result display mode, you can determine when the error  
occurred.  
CD Overall Adjustment Mode  
[FR] key  
***  
Clear the total recording time, if the optical pick-up was replaced.  
CD Run  
x key  
7-1. Operation of The Self-Diagnosis Result Display  
Mode  
MD1 Overall Adjustment Mode  
1. Enter the test mode (Display Check mode).  
2. Press the [FF] key to activate the Self-Diagnosis Result Display  
mode where the LCD displays as shown below.  
[FF] key  
***  
MD1Run  
key  
x
Hi-MD3 Overall Adjustment Mode  
Display of the remote commander  
***  
[VOL +] key  
***  
HM3Run  
$$####  
x key  
Stray Light Offset Overall  
Adjustment Mode  
3. To quit the Self-Diagnosis Result Display mode, press the x key  
***  
[VOL --] key  
and return to the Display Check mode.  
OfsRun  
x key  
Optical Pick-up Operation  
Check Mode  
[GROUP] key  
000  
OPChk  
x key  
Initialize The Adjustment Values  
911  
[T MARK] key  
ResOK?  
x key  
(rotation)  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
Flow of Self-diagnosis Result Display mode operation:  
8. KEY CHECK MODE  
This mode is used for key check.  
Operation of The Key Check Mode  
***  
The first error  
1. Enter the test mode (Display Check mode).  
1 ####  
2. Press the [GROUP] key to activate the Key Check mode where  
the LCD displays as shown below.  
[VOL +] key  
[VOL --] key  
***  
Display of the remote commander  
The last error  
N ####  
11*  
$$$$$$ ##  
[VOL +] key  
[VOL --] key  
***  
“*”  
“$$$$$$” : Pressed key name.  
When remote commander key is pressed, display becomes  
: Remote commander (0: with, 4: without)  
One error before  
the last  
N1####  
as “r$$$$$”.  
When the jog dial is turned, it displays “JOG+ X” or “JOG-  
X” (“X” is number of 1 to 3). If the jog dial is turned four  
click, it displays “JOG+OK” or “JOG-OK”.  
: Key voltage of remote commander. (Hexadecimal number)  
[VOL +] key  
[VOL --] key  
***  
“##”  
Two error before  
the last  
N2####  
3. When all keys check is OK on the main unit, it displays as  
follows.  
[VOL +] key  
[VOL --] key  
***  
Display of the remote commander  
Total recording time  
R_####  
888  
SET OK ##  
[VOL +] key  
[VOL --] key  
When all keys check is OK on the remote commander, it  
displays as follows.  
7-2. Error Code of The Self-Diagnosis Result Display  
Mode  
Display of the remote commander  
Error code  
Description  
00  
01  
02  
03  
04  
05  
06  
07  
08  
09  
12  
13  
32  
33  
34  
No error  
888  
Attempt to access an abnormal address  
High temperature detected  
RMC OK ##  
Focus error (no change)  
Abnormal rotation of disc  
Fault of disc discriminate  
*) Turn the jog dial four click upside and downside to jog test is OK.  
Error of access loop (no change)  
Error of access loop (with change)  
Could not read address  
4. When all keys check are OK both the main unit and the remote  
commander, it display backs to the Display Check mode  
automatically.  
5. To quit the Key Check mode, open the lid and return to the  
Display check mode.  
Focus error (with change)  
Could not read data with SYNC  
TOC address data error  
Focus error, ABCD offset error  
Tracking error, offset error  
Tracking error, X1 tracking error, offset error  
7-3. Clear The Total Recording Time  
After replacing the optical pick-up, clear the total recording time.  
1. Enter the test mode (Display Check mode).  
2. Press the [FF] key to activate the Self-Diagnosis Result Display  
mode.  
3. Press the [VOL--] key once to display the total recording time  
indication.  
4. Press the X key and display “ClrOK?”.  
5. Press the X key again to display “RecT 0” and clear the total  
recording time.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
Ver 1.1  
SECTION 5  
ELECTRICAL ADJUSTMENTS  
1. PRECAUTIONS FOR ADJUSTMENT  
1. Adjustment must be done in the test mode only.After adjusting,  
release the test mode. A key having no particular description  
in the text, indicates a set key.  
3-3. Setting The Temperature Correction Value  
Procedure:  
1. In the test mode (Display Check mode), press the [VOL+] key  
to enter the Manual mode.  
2. Use the following tools and measuring instruments.  
• Digital voltmeter  
2. Press the [FF] key twice, and press the [VOL+] key twice to  
display as follows.  
• Regulated dc power supply (two sets)  
• Thermometer (using the “Setting The Temperature Correction  
Value”)  
Display of the remote commander  
130  
• Laser power meter  
Temp  
• CD adjustment disc TDYS-1 (Part No. : 4-963-646-01)  
• MD1/HiMD1 hybrid adjustment disc MDW-74/GA1  
(Part No. : 4-229-747-01)  
• Hi-MD3 adjustment disc HMD1GSDJ  
(Part No. : 7-819-098-37) *1  
3. Press the [FF] key once to select the item number 0131 and  
display as follows.  
• Remote commander in accessories (with LCD)  
• Battery charging stand and AC adapter in accessories  
• Lithium-ion battery (LIP-4WM) in accessories  
(full charged)  
Display of the remote commander  
131  
• PC application software for test mode  
“TestMode_Enter_For_NH1_NH3D_Ver***.exe” *2  
• USB cable  
SetTmp **  
adjustment value (hexadecimal)  
*1) Hi-MD3 adjustment disc (HMD1GSDJ) is consumable.  
Therefore if it is used 400 times, exchange it for a new.  
*2) Use the newest version every time.  
4. Measure the ambient temperature.  
5. Adjust with [VOL+]/[VOL--] keys so that the adjusted value  
(hexadecimal value) becomes the ambient temperature.  
(example: 25 °C = 19h)  
6. Press the X key to write the adjusted value.  
7. Press the x key four times and back to the Display Check  
mode.  
Copy the whole folder of this program to your PC.  
Operating system: Windows 2000, Windows XP  
When using this application, the SonicStage Ver. 2.0 or 2.1 is  
necessary, and install it in your PC in advance.  
3. Unless specified otherwise, use the AC adaptor and battery  
charging stand in accessories.  
3-4. Power Supply Voltage Adjustment  
Adjustment must be done with the following order.  
2. ADJUSTMENT SEQUENCE  
Adjustment must be done with the following order.  
3-4-1. Setting  
Procedure:  
Adjustment order:  
1. Apply the voltage of 3.7 V to the battery terminals, and enter  
the test mode (Display Check mode).  
2. Press the [VOL+] key to enter the Manual mode.  
3. Press the [VOL+] key twice to display as follows.  
1. Entering the test mode  
2. Initialize the adjustment value  
3. Setting the temperature correction value  
4. Power supply voltage adjustment  
5. Charge function check  
6. Laser power check  
Display of the remote commander  
7. Setting the adjustment values  
8. Servo Overall adjustment  
9. Resume clear  
002  
POWER  
10. Releasing the test mode  
4. Press the [FF] key once, press the [VOL+] key once, and press  
3. ADJUSTMENT OF THE EACH ITEM  
3-1. Entering The Test Mode  
the [FF] key once again to display as follows.  
Refer to the “SECTION 4. TEST MODE”.  
Display of the remote commander  
3-2. Initialize The Adjustment Value  
Procedure:  
1. In the test mode (Display Check mode), press the [VOL--] key  
to enter the Overall adjustment mode.  
210  
PwrAdj  
2. Press the [T MARK] key and display “911 ResOK?”.  
3. Press the X key to display “911 Reset!” and initialize the  
adjustment values.  
5. Repeat the next procedures (3-4-2. PwrAdjAdjustments), and  
adjust all contents of “table 3-4-1. PwrAdj Specifications”.  
4. Press the x key and back to Display Check mode.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
3-4-2. PwrAdj adjustments  
Repeat the following procedures and adjust all contents of “table 3-  
4-1. PwrAdj Specifications”.  
ItemNo.  
2211  
2212  
2213  
2214  
2215  
2216  
2217  
2218  
2219  
2221  
2222  
2223  
2224  
2225  
2226  
2227  
2228  
2229  
2231  
2232  
2233  
Display  
Specification value Measuring point  
211 VC1 **  
2.05V +0.02V  
2.25V ±0.01V  
1.20V +0.01V  
2.60V ±0.015V  
3.10V ±0.015V  
2.32V ±0.02V  
3.02V ±0.02V  
2.27V ±0.02V  
2.47V ±0.02V  
2.72V ±0.02V  
2.97V ±0.02V  
2.52V ±0.02V  
0.89V ±0.02V  
1.08V ±0.02V  
1.52V ±0.02V  
2.27V ±0.02V  
2.97V ±0.02V  
0.94V ±0.02V  
1.28V ±0.02V  
2.57V ±0.02V  
2.57V ±0.02V  
CL8003  
CL8003  
CL603  
CL604  
CL604  
CL362  
CL362  
CL509  
CL509  
CL509  
CL509  
CL516  
CL624  
CL624  
CL624  
CL624  
CL624  
CL624  
CL624  
CL624  
CL624  
212 VC1H N **  
213 VC2 **  
Example Display (Item No. 2211)  
214 DDC3 L **  
215 DDC3 H **  
216 REG1 L **  
217 REG1 H **  
218 REG2 1 **  
219 REG2 2 **  
221 REG2 3 **  
222 REG2 4 **  
223 REG3 **  
211  
VC1  
**  
adjustment value (hexadecimal)  
Procedure:  
1. Connect the digital voltmeter to measuring point (refer to the  
following table) and ground (CL433).  
2. Press the [FF] key to change the item number.  
3. Adjust with [VOL+]/[VOL--] keys so that the value of digital  
voltmeter becomes specification value.  
4. Press the X key to write the adjusted value.  
5. Press the [FF] key to select the next item.  
6. Repeat adjustment from step 1 until item number 2233.  
224 VREC 1 **  
225 VREC 2 **  
226 VREC 3 **  
227 VREC 4 **  
228 VREC 5 **  
229 VREC 6 **  
231 VREC 7 **  
232 VREC 8 **  
233 VREC 9 **  
Note1: “**” is adjustment value (hexadecimal number).  
Note2: Ground point of all measuring points is CL433.  
Table 3-4-1. PwrAdj Specifications  
Adjustment Location:  
– MAIN BOARD –  
(Conductor Side)  
CL935  
LITHIUM-ION  
RECHARGEABLE BATTERY  
LIP-4WM  
R912  
S892  
(HALF LOCK)  
C575  
C894  
R906  
R903  
L902  
L901  
R511 C565  
E C B  
D904  
16  
+
+
C922  
C949  
+
+
+
S895  
C913  
C912  
C911  
HOLD  
C903  
R954  
Q504  
C566  
2
1
4
R516  
R515  
L503  
R505  
SL891  
SL892  
OFF  
ON  
C925  
IC903  
2
SL901  
+
C553  
17  
18  
1
CL516  
3
C902  
E C B  
64  
C554  
C536  
C931  
C932  
Q503  
R513  
+
C518  
C520  
D906  
R956  
R957  
C433  
+
C910  
C909  
D882  
1C 2B 2E  
L505  
R514  
IC881  
K
K
A
A
Q951  
E
B
+
3
4
2
1
IC901  
C523  
R525  
R510  
FB503  
R945 1E 1B 2C  
3
Q502  
1
2
4
3
1
R953  
C906  
C917  
C
C558  
D881  
C552  
IC501  
C529  
C884  
A
K
D883  
D884  
C519  
C934  
32  
33  
50  
R934  
C431  
IC502  
C561  
49  
1E  
1B  
2C  
1C  
2B  
2E  
L501  
IC902  
34  
48  
4
5
Q881  
C527  
R939  
D902  
C513  
R890  
2S  
2G  
1D  
2D  
1G  
1S  
R927  
L904  
R935  
R936  
+
R904  
R907  
C948  
D
D
G
D
D
S
C522  
C521  
D501  
CL509  
CL603  
SL894  
R886  
R938  
R937  
Q501  
R888  
2E  
2B  
1C  
2C  
+
C955  
1B  
1E  
R947  
R946  
C327  
1
CN501  
3
RB701  
IC302  
R201  
R103  
R203  
R887 C888  
26  
L802  
+
+
C316  
FB201  
+
C570  
+
C819  
4
5
C313  
+
IC872  
R101  
CN701  
FB502  
IC605  
C706  
C705  
3
4
2
1
C880  
D871  
L804  
L803  
2
1
BP801  
C328  
FB101  
RB702  
C315  
C879  
R860  
1
10  
1
3
4
+
C108  
Q802  
R706  
R640  
14  
8
R307 C308  
R106  
4
+
28  
15  
C107  
15  
21  
IC804  
7
1
2
3
C573  
BP701  
29  
14  
IC604  
3
4
1
C104  
C204  
C105  
C205  
R864 C852  
C835  
IC301  
C322  
C319  
D611  
K
5
D803  
R868  
A
R893  
C892  
+
C207  
IC701  
22  
28  
+
FB302  
FB202  
C320  
FB501  
1
SL801  
+
C617  
+
C811  
5
1
+
C312  
+
C318  
D614  
6
20  
C612  
R813  
FB803  
CL8003  
42  
1
R609  
C647  
C311  
A
K
IC891  
SL803  
43  
56  
C855  
C821  
16  
10  
R650 R633  
G
S
D
D
CL362  
CL604  
11  
15  
Q606  
D
1E  
1B  
2C  
1C  
R637  
R638  
BP312  
2B  
2E  
1C  
R364  
R363  
D
Q404  
E C B  
R656  
R636  
R635  
1E  
X802  
IC873  
3
A
K
D603  
Q405  
1B  
2C  
2B  
2E  
R418  
R403  
IC871  
C626  
4
5
3
1
+
C356  
7
1
R617  
BP352  
+
C874  
C642  
C641  
R616  
8
1
28  
22  
+
C362  
FB355  
R808  
BP351  
4
6
12  
10  
R604  
IC351  
D801  
R641  
R642  
C643  
7
9
X872  
C368  
R404  
F351  
R355  
FB354  
FB353  
FB357  
14  
C410  
IC601  
R354  
C367  
15  
21  
R455  
X801  
R846  
C407  
C370  
IC801  
Q803  
CN491  
R416 C415  
R407  
R356  
IC401  
FB151  
Q251  
E C B  
+
FB801  
R493  
C613  
8
FB251  
Q351  
D618  
C625  
C604  
2D  
2G  
C636 C630  
C602  
C662  
R402  
CL8007  
2D  
1D  
1D  
2S  
1G  
1S  
+
C856  
K
A
Q151  
B C E  
D610  
C406  
R456  
B C E  
+
+
C402  
1
Q352  
A
K
D609  
R352 C352  
C861  
C804  
R431  
D
R459 R458  
C351  
R471  
D617  
K
C403  
C252  
R453  
K
G
S
A
C826 R492  
C825 R491  
K
1
11  
D431  
C457  
C851  
A
K
FB453  
D451  
R475  
A
K
K
A
A
Q431  
C460  
R474  
R473  
C306  
D455  
CN471  
K
A
D616  
D491  
C822  
BP471  
CL624  
CL460  
(VBUS GND)  
CL433  
(GND)  
CL453  
(VBUS 5V) (DC IN 6V)  
CL451  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
3-4-3. VBsAdj adjustments  
Procedure:  
1. In the “3-4-2. PwrAdj Adjustments” completed status, press  
the [FF] key to display as follows.  
6. And [FF] key once again to select the item number 2251 and  
display “251 ChgChk **” on the LCD of remote commander.  
7. Press the X key confirm that “ChgCOK” is displayed.  
8. Press the x key four times and back to the Display Check  
mode.  
Display of the remote commander  
9. Cut the power supply and remove the resistor that connected  
to the battery terminals.  
240  
VBsAdj  
3-6. Laser Power Check  
Procedure:  
1. In the test mode (Display Check mode), press the [VOL+] key  
to enter the Manual mode.  
2. Apply the voltage of 5V to the CL453 (VBUS 5V) and CL460  
(VBUS GND).  
3. Press the [FF] key to change the item number to 2241.  
4. Adjust with [VOL+]/[VOL--] keys so that the value of digital  
voltmeter becomes specification value. (refer to “table 3-4-2.  
VBsAdj Specifications”)  
2. Open the lid and press the [FR] key continuously until the  
optical pick-up moves to the most inward track.  
3. Set the laser power meter so that the laser beam from the optical  
pick-up aims at the objective lens of laser power meter at right  
angle.  
4. Press the [VOL--] key once to display as follows.  
5. Press the X key to write the adjusted value.  
6. Press the [FF] key to select the next item, and repeat  
adjustments to item number 2243 at the same manner as step  
3 to step 5.  
Display of the remote commander  
009  
DESIGN  
Item No. Display  
2241 241 REG4 **  
2242 242 REG5 **  
2243 243 REG6 **  
Specification value  
1.13 V ± 0.01 V  
2.05 V + 0.02 V  
3.30 V ± 0.01 V  
Measuring point  
CL603  
5. Press the [FF] key three times to select the item number 9111  
CL8003  
and display as follows.  
CL8007  
Note1: “**” is adjustment value (hexadecimal number).  
Note2: Ground point of all adjustment points is CL433.  
Note3: Refer to page 17 for adjustment location.  
Table 3-4-2. VBsAdj Specifications  
Display of the remote commander  
111  
LrefPw **  
7. Press the [FF] key to select the item number 2244, and turn off  
the power supply of battery terminal.  
8. Adjust with [VOL+]/[VOL--] keys so that the voltage of between  
CL935 and CL433 (GND) becomes 4.10 V (− 0.02 V).  
9. Press the X key to write the adjusted value.  
6. Confirm that the value of laser power meter is 0.67 mW ±  
21%.  
7. Press the [FF] key to select the item number 9112.  
8. Confirm that the value of laser power meter is 0.76 mW ±  
10. Apply the voltage of 3.7 V to the battery terminal again.  
18%.  
11. Press the  
2240).  
x
key to display “240 VBsAdj” (Item number:  
9. Press the [FF] key to select the item number 9113.  
10. Confirm that the value of laser power meter is 6.25 mW ±  
12. Turn off the voltage of 5 V to the CL453 (VBUS 5V) and  
12%.  
CL460 (VBUS GND).  
13. Press the x key three times and back to the Display Check  
mode.  
11. Press the x key four times and back to the Display Check  
mode.  
3-5. Charge Function Check  
Note1: When perform this check, don’t apply a voltage to battery terminals.  
Note2: Be sure to disconnect theAC adapter when connecting the resistors.  
Doing so with the power supply connected causes a trouble.  
Procedure:  
1. Connect the 10 ohms resistor (more than 3 watts) to battery  
terminals.  
2. Connect the AC adapter to the battery charging stand in  
accessories and set the main unit.  
3. Enter the test mode (Display Check mode).  
4. Press the [VOL+] key once to enter the Manual mode.  
5. Press the [VOL+] key twice, press the [FF] key once, press the  
[VOL+] key once, press the [FF] key once, press the [VOL+]  
key twice to display as follows.  
Display of the remote commander  
250  
ChrgLi  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
3-7-2. Other setting  
1. In the test mode (Display Check mode), press the [VOL+] key  
to enter the Manual mode.  
3-7. Setting The Adjustment Values  
3-7-1. Hi-MD3 setting  
Preparation:  
2. Press the [FF] key five time to select the item number 0113  
and display as follows.  
1. Perform calculation every item based on the data given by the  
Hi-MD3 adjustment disc by referring to the following table.  
(Round off the value in decimal place)  
Display of the remote commander  
2. Convert the calculated value into hexadecimal number.  
113  
Note: The Hi-MD3 adjustment parameters vary depending on the disc,  
and therefore use the parameters of the disc used when performing  
the adjustment.  
DistF **  
adjustment value (hexadecimal)  
Item No.  
0211  
(*1)  
Calculating formula (*3)  
Pr_nominal / 0.05  
3. Press the [VOL+]/[VOL--] key and set the according value to  
each model type and destination referring to the following  
table.  
Por / 0.05  
0212  
0213  
(*2)  
Kr × (−100)  
Pw_nominal / 0.05  
Ppw / 0.05  
4. Press the X key to write the adjusted value.  
Destination  
US, Australian  
Setting value  
0214  
0215  
0216  
Kw × (−100)  
Prmin / 0.05  
Pwmin / 0.05  
01  
81  
AEP, UK  
E18, Hong Kong, Taiwan,  
Korean, Chinese, Tourist  
• Abbreviation  
*1) If the “Pr_nominal” value is indicated, use the “Pr_nominal” value  
and not used “Por” value.  
*2) If the “Pw_nominal” value is indicated, use the “Pw_nominal” value  
and not used “Ppw” value.  
05  
E18: 100V - 240V AC area in E model  
*3) Round off after the decimal point.  
Table 3-7-2. Mode Type and Destination Setting  
Table 3-7-1. Hi-MD3 adjustment parameter  
3-8. Servo Overall Adjustment  
Note1: Be sure to adjustment so that the set is horizontal and the LCD is  
upside. Unless performed in that state, it is not adjusted correctly.  
Note2: If NG is displayed in the middle of this adjustments, perform “3-2.  
Initialize TheAdjustmentValue” and “3-7. Setting TheAdjustment  
Values” again, then retry this adjustments from step 1.  
Example of Calculation:  
Result  
Item No.  
Parameter  
Decimal  
50  
Hexadecimal  
0211  
0212  
0213  
0214  
0215  
0216  
Pr_nominal 2.50 mW  
32h  
1Eh  
93h  
28h  
26h  
74h  
Kr  
−0.3 %/°C  
30  
Procedure:  
Pw_nominal 7.35 mW  
147  
40  
1. Insert the full charged lithium-ion battery (LIP-4WM)  
and enter the test mode (Display Check mode).  
2. Press the [VOL--] key to enter the Overall Adjustment mode.  
3. Insert the CD adjustment disc (TDYS-1).  
4. Put the main unit horizontal so that the LCD becomes upside,  
and press the [FR] key.  
Kw  
−0.4 %/°C  
1.9 mW  
Prmin  
Pwmin  
38  
5.8 mW  
116  
Procedure:  
5. Wait until “CD OK” is displayed on the LCD.  
6. Insert the MD1/HiMD1 hybrid adjustment disc  
(MDW-74/GA1).  
7. Put the main unit horizontal so that the LCD becomes upside,  
and press the [FF] key.  
1. In the test mode (Display Check mode), press the [VOL+] key  
to enter the Manual mode.  
2. Press the [FF] key once, press the [VOL+] key once, and press  
the [FF] key once again to display as follows.  
Display of the remote commander  
8. Wait until “MD1 OK” is displayed on the LCD.  
9. Insert the Hi-MD3 adjustment disc (HMD1GSDJ).  
10. Put the main unit horizontal so that the LCD becomes upside,  
and press the [VOL+] key.  
210  
PwrAdj  
11. Wait until “HMD OK” is displayed on the LCD.  
12. Eject the disc.  
3. Press the [FF] key once to select the item number 0211.  
4. Adjust with [VOL+]/[VOL--] keys so that the adjustment value  
of LCD becomes calculated value.  
5. Press the X key to write the adjusted value.  
6. Press the [FF] key to next item.  
13. Put the main unit horizontal so that the LCD becomes upside,  
and press the [VOL--] key.  
14. Wait until “OfstOK” is displayed on the LCD.  
15. Press the x key and back to the Display Check mode.  
7. Repeat adjustment from step 4 until item number 0216.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
3-9. Resume Clear  
Procedure:  
1. In the test mode (Display Check mode), press the [VOL+] key  
to enter the Manual mode.  
2. Press the [VOL+] key once, press the [FF] key once, press the  
[VOL--] key once, press the [FF] key once, and press the [VOL+]  
key twice, press the [FF] key three times to select the item  
number 1933.  
3. Press the X key to resume clear.  
4. Press the x key four times and back to the Display Check  
mode. And remove the lithium-ion battery.  
3-10. Releasing The Test Mode  
Refer to the “SECTION 4. TEST MODE”.  
Note: Once the test mode is activated with this application, the test mode  
is then activated forcibly by only turning on the power.  
After the repair completed, be sure to release the test mode by using  
this application once more.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
SECTION 6  
DIAGRAMS  
6-1. BLOCK DIAGRAM – MD SERVO Section –  
OVER WRITE HEAD DRIVE  
IC601 (1/2)  
CLK  
77  
69  
78  
70  
HB  
HBB  
HA  
HR601  
OVER  
WRITE  
HEAD  
CLK 60  
A
(Page 23)  
OVER WRITE  
HEAD DRIVE  
Q601, 602  
EFM  
62  
HAB  
EFM_CLK  
LATCH  
63  
56  
84  
OUTA  
OUTB  
M703  
OVER WRITE  
HEAD  
RF AMP, FOCUS/TRACKING ERROR AMP  
IC501  
M
UP/DOWN  
82  
VREF  
7
VREF10  
39  
43  
ADIP_IN  
NPPO  
RF_IY  
RF_IX  
RF_JX  
RF_JY  
11  
10  
13  
12  
175  
245  
182 158  
145 VIN  
IY  
IX  
56  
1
IY  
IX  
RFI  
101  
RF BUFFER  
Q504  
TO IC801 (2/3)  
(AUDIO SECTION)  
RFO  
8
JX  
54 JX  
ABCD 40  
108 ABCD  
109 FE  
SYSTEM CONTROLLER,  
DIGITAL SIGNAL PROCESSOR  
IC801 (1/3)  
JY  
A
B
JY  
A
B
C
D
55  
50  
51  
52  
49  
FE  
TE  
41  
114 TE  
42  
23  
19  
C
D
ADFG  
PD-NI  
153 ADFG  
142 APCREF_DA  
174 FS256_OUT  
180 OFTRK  
A_C  
D_C  
15  
14  
CLK 26  
OFTRK  
45  
F
20 PD_BUF  
PD_I  
VC  
123 VREF_MON  
110 VC  
38  
9
18  
17 PDO_SOURCE  
VREF09  
PEAK  
IIN  
48  
106 PEAK  
107 BOTM  
BOTM 47  
SBUS  
SCK  
33  
32  
21  
251 SSB_DATA  
252 SSB_CLK  
113 SE  
OPTICAL  
PICK-UP  
BLOCK  
FOCUS/TRACKING  
COIL DRIVE,  
SPINDLE/SLED  
MOTOR DRIVE  
IC701  
S-MON  
(ABX-U)  
XRESET  
35  
225 XRF_RST  
S0  
S1  
209 PD_S0  
210 PD_S1  
254 LDPEN  
272 XLSRCK  
TRK+  
TRK–  
FI2  
RI2  
30 FO2  
32 RO2  
28  
27  
155 TFDR  
154 TRDR  
PLSE_XDC  
CONT  
FCS+  
FCS–  
FI1  
RI1  
FO1  
11 RO1  
13  
15  
16  
156 FFDR  
157 FRDR  
TRK+  
TRK–  
TRK+  
TRK–  
216 SLD_MON  
172 SRDR  
167 SLDV  
35 UO2  
25 CPUI2  
37 VO2  
24 CPVI2  
39 WO2  
23 CPWI2  
26 COM2  
UI2  
VI2  
WI2  
43  
42  
41  
FCS+  
FCS–  
FCS+  
FCS–  
U
V
168 SLDW  
M702  
(SLED)  
W
PWM2  
ZI2  
44  
22  
159 SFDR  
MDVCC  
REG2 B+  
REG3 B+  
L1 B+  
MVCC  
PVCC  
VCC  
L1  
289 HI_Z_SLO  
L2 B+  
L2  
SLD MON U  
SLD MON V  
SLD MON W  
232 SPDL_MON  
160 SPRD  
162 SPDV  
SLCU 169  
SLCV 170  
SLCW 171  
8
UO1  
18 CPUI1  
UI1  
VI1  
WI1  
56  
1
2
VO1  
19 CPVI1  
6
163 SPDW  
CLV MON U  
CLV MON V  
CLV MON W  
SPCU 164  
SPCV 165  
SPCW 166  
PWM1  
ZI1  
55  
21  
161 SPFD  
U
V
4
WO1  
28 CPWI1  
17 COM1  
M701  
(SPINDLE)  
290 HI_Z_SPDL  
W
OE  
48  
238 XRST_MTR_DRV  
• SIGNAL PATH  
: PLAYBACK  
: REC  
47 46 45  
52 53 54  
MZ-NH1  
21  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
MZ-NH1  
6-2. BLOCK DIAGRAM – AUDIO Section –  
SWITCHING DRIVER,  
HEADPHONE AMP  
IC351  
MUTEON  
(Page 23)  
C
OUT_  
BEEP_IN  
2
3
17  
15  
BEEP 199  
BEEP2  
DCLSOUTL  
OUT2  
DIN2  
151  
J351  
MUTING  
Q351  
i
FROM IC801 (1/3)  
(MD SERVO SECTION)  
DCLSOUTR  
OUT1  
4
DIN1  
7
5
150  
J301  
OUT_BEEP1  
LINE IN  
(OPT)  
23 MCK  
26 EN2  
25 EN1  
27 ENREG  
11 VCONT  
FS512 312  
D_EN2 296  
D_EN1 295  
F351  
MUTING  
RVDD  
RVDD  
DTCK  
KEY-R  
RGND  
Q151, 251  
D_ENREG 211  
D_VCONT_PWM 243  
173 DIN  
MUTING  
CONTROL  
Q352  
B+ SWITCH  
Q302  
VC01 B+  
A/D CONVERTER, MIC AMP  
IC301  
XMUTE 212  
SDT0  
MCLK  
BCLK  
LRCK  
PDN  
LIN  
RIN  
7
9
8
10  
14  
28  
1
307 ADDT  
306 FS256  
309 XBCK  
308 LRCK  
190 XPD_ADC  
DTCK 313  
RMC_KEY 131  
RMC KEY  
MICL  
MICR  
15  
22  
(Page 23)  
D
J302  
CDTI  
CCLK  
11  
12  
PREOL  
PREOR  
16  
21  
MIC  
(PLUG IN POWER)  
CSN  
13  
189 XCS_ADC  
CN451 (1/2)  
(USB)  
D871  
+3.9V  
REGULATOR  
IC872  
PREL  
PRER  
18  
19  
VB B+  
6
DATA+  
DATA–  
UDP 314  
UPUEN 318  
UDM 315  
4
3
5
REAL TIME  
CLOCK  
IC871  
LEVEL SHIFT  
IC873  
200 XOPT_CTL  
8
7
OSCOUT  
OSCIN  
SIO  
SCLK  
1
2
X872  
32.768kHz  
185 OPT_DET  
186 XJACK_DET  
187 XMIC_DET  
12  
X801  
48MHz  
X802  
22.5792MHz  
+2.1V  
REGULATOR  
IC302  
REG1 B+  
319  
320  
310  
311  
247  
EEPROM  
IC891  
WAKE UP SWITCH  
USB_WAKE  
193  
SYSTEM CONTROLLER,  
DIGITAL SIGNAL PROCESSOR  
IC801 (2/3)  
Q803  
SI0 195  
2
SO  
SO0 196  
SCK0 197  
11 SI  
12 SCK  
REG VSTB B+  
• SIGNAL PATH  
XCS_NV 239  
1
XCS  
: PLAYBACK  
: OPTICAL IN  
: LINE IN  
SDO0, SCK0  
E
128 133  
124 125  
203  
244  
183  
213 214 215 236 192  
135  
188  
184  
253  
227  
: USB input from PC  
: USB output to PC  
: MIC IN  
(Page 23)  
LED DRIVE  
Q491  
LED DRIVE  
Q405  
OFF  
ON  
S895  
HOLD  
–1  
–2  
S891–2  
Hi-MD  
PROTECT  
DETECT  
S892  
HALF  
LOCK  
S893  
OPEN/CLOSE  
DETECT  
S891–1  
PROTECT  
DETECT  
SWITCH MODULE  
LCD MODULE  
XWK1, XWK2,  
XWK4  
(Page 23)  
B
MZ-NH1  
22  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                       
MZ-NH1  
4-3. BLOCK DIAGRAM – POWER SUPPLY Section –  
(Page 22)  
SDO0 SCK0  
SDO0  
SCK0  
CLK  
REC KEY  
MUTEON  
58 DATA  
60  
E
(Page 21)  
CLK 63  
A
SCK  
6
3
VRMC  
XWK3  
59 STRB  
34 XRST2  
17 XRST1  
(Page 22)  
(Page 22)  
(Page 22)  
D
C
B
MUTEON 45  
RESET SIGNAL  
GENERATOR  
IC903  
VSTB  
B+  
VCO2 VC01 VG  
+5.5V  
REGULATOR  
IC902  
XWK1, XWK2,  
XWK4  
B+  
B+  
B+  
218 233 229  
HPOUT B+  
XWK4  
XWK2  
2
4
XWK4  
XWK2  
B+ SWITCH  
Q604, 611  
D_ENVG  
XRST  
XWK1  
297  
136  
WAKE UP SWITCH  
Q951  
5
XWK1  
OR GATE  
IC604  
POWER CONTROL  
IC901  
87 64 94 59 58  
VOLTAGE  
DETECT  
IC605  
REGI1 55  
REGI2 52  
REGI3 48  
DDC3 B+  
REG4 B+  
91 DVDD_OUT  
VG  
TSBV_IN  
REG_IN  
DVDD_IN  
VSTB_IN  
VREF_IN  
83  
101  
97  
90  
105  
18  
24 VG  
+1.2V  
REGULATOR  
IC603  
DACVREFH 141  
11 VCO1  
40 VCO2  
HVB  
8
VB 27  
REG5 B+  
VC B+  
98 REG_OUT  
FCRAM_VDD  
FFCLR  
B+ SWITCH  
Q883, 884  
9
VSTB  
D609  
D610  
REG5 B+  
LG 25  
57 VREF  
VO1 12  
VO2 39  
REG1 B+  
REG2 B+  
REG3 B+  
54 REGO1  
51 REGO2  
47 REGO3  
61 VIF  
13 VC  
14 VC  
POWER CONTROL  
IC601 (2/2)  
VREC B+  
D884  
D883  
B+ SWITCH  
Q502, 503  
+2.2V  
REGULATOR  
IC882  
VREC  
VREC_IN  
VREC_IN  
112  
80  
81  
MDVCC  
VB B+  
REG5 VSTB B+  
REG5 TSBV B+  
106 VSTB_OUT  
102 TSBV_OUT  
DRAM_  
HOLD_DET  
LEVEL  
SHIFT  
Q882  
MDVCC_CTL  
204  
D881  
DRAM_  
181  
231  
67 RECP  
VRECO_1  
VRECO_2  
5
4
RECP  
RECP_MON  
D602  
REGULATOR  
CONTROL  
Q881  
VOLTAGE  
DETECT  
IC881  
VDD_CLR  
+1.2V  
REGULATOR  
IC602  
REG F B+  
REG5 OSC B+  
L1_1  
L1_2  
7
6
DRAM_ALONE  
B+ SWITCH  
Q603  
D882  
93 OSC_OUT  
108 V33RO  
DW_1T  
DW_1B  
3
2
B+ SWITCH  
Q801, 802  
USB IF VDD  
+2.5V  
REGULATOR  
IC804  
DW_3T  
DW_3B  
26  
27  
VB B+  
D603  
+3V  
REGULATOR  
IC502  
L1 B+  
L2 B+  
VB B+  
B+ SWITCH  
Q605  
L3_2  
L3_1  
25  
24  
CN451 (2/2)  
(USB)  
DDC3 B+  
21 V3O_1  
22 V3O_2  
28 V3FB  
66 VG2  
VOLTAGE  
299  
300  
PWM_L1  
PWM_L2  
SWITCHING  
Q501  
VBUS  
VPDRV  
PVBUS  
VBUSSEL  
CLP  
CLM  
POWP1  
POWP2  
54  
36  
88  
43  
38  
42  
37  
41  
3
VBUS  
LIMITER  
Q606, 607  
73 VG3  
8
PWR_WAKE  
250  
316  
317  
51 VBUS_DET  
86 HOLD_OUT  
99 SUS_IN  
VBUS_DET  
USBHOLD  
SUSPEND  
VI  
1
6
DCIN6V  
11  
IN1–  
TYPE1  
TYPE2  
12  
11  
16  
132  
95 RST_IN  
RST_CONT  
12  
VB_MON 121  
VBUS_MON 129  
HIDC_MON 127  
VB B+  
VBUS B+  
DC IN B+  
CHARGE CONTROL  
IC401  
REGULATOR  
Q401  
Q404  
D401  
20 I_CTL1  
RF1  
VO  
BAT+  
26  
32  
31  
219 73 256 257 207  
220  
LITHIUM-ION  
RECHARGEABLE  
BATTERY  
N1_VI_CTL  
CHG_PWM  
CHG_I_CTL2  
CHG_I_CTL3  
CHG_MON  
A7CAL_SW  
XRST_CHG_IC  
CHG_SEL  
237  
240  
221  
222  
122  
194  
208  
230  
241  
4
7
VI_CTL  
CHG_CTL  
LIP-4WM  
BAT–  
25  
30  
29 I_CTL2  
23 I_CTL3  
22 A/D  
13 A7CAL_SW  
14 XRESET  
18 I_SEL  
CHARGE  
CONTROL  
Q432  
CHG_SW1  
SYSTEM CONTROLLER  
IC801 (3/3)  
RS  
24  
5
CHARGE  
CONTROL  
Q431  
CHG_SW2  
CHG_IAMP_CAL  
27 IAMP_CAL  
BATT_MINUS_MON  
XGUM_ON  
130  
198  
S431  
(BATTERY INSERT DETECT)  
MZ-NH1  
23  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                     
MZ-NH1  
• Note For Printed Wiring Boards and Schematic Diagrams  
• Waveforms  
IC701 1 (VI1), 2 (WI1),  
Note on Printed Wiring Board:  
• X : parts extracted from the component side.  
• Y : parts extracted from the conductor side.  
Note on Schematic Diagram:  
• All capacitors are in µF unless otherwise noted. (p: pF)  
50 WV or less are not indicated except for electrolytics  
IC501 wh (CLK) (Servo on)  
IC801 <czz (OSCO)  
1
2
3
4
5
6
7
8
9
q;  
qa  
qs  
qd  
th (UI1) (Servo on)  
•
•
f
: internal component.  
: Pattern from the side which enables seeing.  
and tantalums.  
• All resistors are in Ω and / W or less unless otherwise  
specified.  
1
4
(The other layers' patterns are not indicated.)  
•
f
: internal component.  
3 Vp-p  
2.7 Vp-p  
Caution:  
• C : panel designation.  
2.2 Vp-p  
Pattern face side: Parts on the pattern face side seen from  
(Conductor Side) the pattern face are indicated.  
Note: The components identified by mark 0 or dotted line  
with mark 0 are critical for safety.  
88 ns  
44 ns  
7.6 ms  
1 V/DIV, 5 ms/DIV  
Parts face side:  
Parts on the parts face side seen from  
1 V/DIV, 50 ns/DIV  
1 V/DIV, 20 ns/DIV  
Replace only with part number specified.  
(Component Side) the parts face are indicated.  
• Main board is multi-layer printed board.  
However, the patterns of intermediate-layer have not been in-  
cluded in this diagrams.  
• A : B+ Line.  
IC701 tg (PWM1) (Servo on)  
IC901 yd (CLK)  
• Total current is measured with MD installed.  
• Power voltage is dc 6 V and fed with regulated dc power  
supply from CL451 (DC IN 6V) and CL460 (VBUS GND).  
• Voltages and waveforms are dc with respect to ground  
under no-signal conditions.  
• Lead Layouts  
surface  
no mark : PLAYBACK  
2.5 Vp-p  
2.7 Vp-p  
(
[
) : PLAYBACK (servo on)  
] : PLAYBACK (servo stop)  
: Impossible to measure  
5.7 µs  
11.3 µs  
1 V/DIV, 5 µs/DIV  
∗
1 V/DIV, 5 µs/DIV  
• Voltages are taken with aVOM (Input impedance 10 MΩ).  
Voltage variations may be noted due to normal produc-  
tion tolerances.  
• Waveforms are taken with a oscilloscope.  
Voltage variations may be noted due to normal produc-  
tion tolerances.  
IC501 1 (IX) (Servo on)  
IC301 8 (BCLK)  
Lead layout of conventional IC  
CSP (chip size package)  
• Circled numbers refer to waveforms.  
• Signal path.  
E
j
J
F
d
G
N
: PLAYBACK  
: REC  
: OPTICAL IN  
: LINE IN  
: USB input from PC  
: USB output to PC  
: MIC IN  
2.6 Vp-p  
190 mVp-p  
354 ns  
50 mV/DIV, 200 ns/DIV  
1 V/DIV, 200 ns/DIV  
501 8 (RFO) (Servo on)  
IC301 9 (MCLK)  
• Abbreviation  
E18 : 100V - 240V AC area in E model  
JE : Tourist model  
2.9 Vp-p  
1.2 Vp-p  
88 ns  
500 mV/DIV, 200 ns/DIV  
1 V/DIV, 50 ns/DIV  
IC501 ra (FE) (Servo on)  
IC301 q; (LRCK)  
2.6 Vp-p  
Approx.  
60 mVp-p  
22.8 µs  
20 mV/DIV, 1 µs/DIV  
1 V/DIV, 10 µs/DIV  
IC501 rs (TE) (Servo on)  
IC871 8 (OSCOUT)  
960 mVp-p  
Approx.  
350 mVp-p  
30.8 µs  
100 mV/DIV, 1 µs/DIV  
500 mV/DIV, 50 µs/DIV  
MZ-NH1  
24  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                         
MZ-NH1  
• See page 36 for IC Block Diagram. • See page 24 for Waveforms.  
6-4. SCHEMATIC DIAGRAM – MAIN Section (1/9) –  
(1/9)  
XRST_MTR_DRV  
SLD_CON_W  
SLD_CON_V  
SLD_CON_U  
SLD_PWM  
C716  
0.1  
XRST_MTR_DRV  
SLD_CON_W  
SLD_CON_V  
SLD_CON_U  
SLD_PWM  
C714  
0.1  
R701 R703  
0
0
L701  
0
L702  
SLD_MON_U  
SLD_MON_V  
SLD_MON_W  
SLD_MON_U  
SLD_MON_V  
SLD_MON_W  
SLD_CON_W  
SLD_CON_V  
TF1  
TR1  
ZI2  
TF1  
TR1  
ZI2  
RB701  
2.2k  
ZI1  
ZI1  
FR1  
FF1  
(Page 33)  
M702  
FR1  
FF1  
(SLED)  
U
N
CN701  
10P  
CLV_CON_W  
CLV_CON_V  
CLV_CON_U  
CLV_PWM  
CLV_CON_W  
CLV_CON_V  
CLV_CON_U  
CLV_PWM  
SLD_CON_U  
TF1  
SLEDW  
UI2  
PWM2  
FI2  
RI2  
W
V
SLD_PWM  
TR1  
R707  
1k  
SLEDV  
SLEDU  
SLEDN  
HD_DRV-  
HD_DRV+  
CLVW  
SLD_MON_U  
CPUO2  
COM2  
CPUI2  
CPVI2  
CPWI2  
ZI2  
SLD_MON_V  
CLV_MON_U  
CLV_MON_V  
CLV_MON_W  
CPVO2  
CLV_MON_U  
CLV_MON_V  
CLV_MON_W  
SLD_MON_W  
M703  
C712  
CPWO2  
0.1  
OVER WRITE  
XRST_MTR_DRV  
R706  
0
OE  
HEAD UP/DOWN  
ZI2  
ZI1  
GND1  
VC  
M701  
C713  
0.1  
CLVV  
FOCUS/TRACKING COIL DRIVE,  
SPINDLE/SLED MOTOR DRIVE  
ZI1  
(SPINDLE)  
CLVU  
VG  
CPWI1  
CPVI1  
CPUI1  
COM1  
RI1  
U
N
CLV_MON_W  
CLV_MON_V  
CLV_MON_U  
CLV_PWM  
IC701  
SC981583EPR2  
CLVN  
CPWO1  
CPVO1  
CPUO1  
PWM1  
UI1  
E1  
E2  
W
V
FR1  
FF1  
CLV_CON_U  
(Page 30)  
FI1  
RB702  
10k  
A1  
A2  
A3  
A4  
CLV_CON_V  
CLV_CON_W  
L704  
22µH  
R702 R704  
0
0
(Page 26)  
C715  
0.1  
C717  
0.1  
A5  
D1  
D2  
D3  
(Page 29)  
(Page 28)  
C1  
(Page 27)  
MZ-NH1  
25  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
MZ-NH1  
• See page 36 for IC Block Diagrams.  
6-5. SCHEMATIC DIAGRAM – MAIN Section (2/9) –  
(2/9)  
D601  
MA2Z748001S0  
C660  
XCS_REC_DRV  
0.1  
REG_DACVREFH  
REG_F  
SUSPEND  
USB_HOLD  
RECP  
SUSPEND  
USB_HOLD  
RECP  
C656  
C655  
1
1
D609  
MA2Z748001S0  
EFM_CLK  
EFM  
D610  
MA2Z748001S0  
EFM_CLK  
EFM  
VOLTAGE DETECT  
IC605  
XC61CN1702NR  
XCS_REC_DRV  
VBUS_DET  
XCS_REC_DRV  
VBUS_DET  
NC  
VIN  
(Page 33)  
+1.2V REGULATOR  
VSS  
VOUT  
C630  
0.1  
R604  
0
C636  
0.1  
R643  
220k  
IC602  
R1160N121B-TR-F  
XRST2  
C625  
0.1  
XRST2  
RST_CONT  
XRST  
+1.2V REGULATOR  
R603 470k  
RST_CONT  
XRST  
Q604,611  
IC603  
R1180Q121C-TR-F  
B+ SWITCH  
R630  
0
SDO0  
R634  
100k  
C601  
1
SDO0  
SCK0  
-1  
-2  
SCK0  
4FS  
4FS  
C614  
22 6.3V  
SLEEP  
RMC_DTCK  
C629  
0.1  
SLEEP  
RMC_DTCK  
Q604  
XP4601-TXE  
R644 R645  
470k  
R608  
1
470k  
A1  
A2  
3.3V  
C643  
2.2  
3.3V  
USB_HOLD  
REG5_VSTB  
REG5_TSBV  
REG5_REG  
REG5_OSC  
REG4_DVDD  
REG_F  
(Page 32)  
REG5_VSTB  
REG5_TSBV  
REG5_REG  
REG5_OSC  
REG4_DVDD  
REG_F  
RST_OUT  
OUTA  
NC_M12  
S
NC_AI2  
HOLD_OUT  
RST_OUT  
PVBUS  
LATCH  
XWKO  
D613  
MA2Z748001S0  
Q611  
SI1410EDH-T1  
VBUS  
WAKEC  
V33UO  
VBUS_DET  
VBUSREF  
L5_2  
R628  
22  
C612 22 6.3V  
REG_DACVREFH  
CL603  
REG_DACVREFH  
XRST2  
REG4_DVDD  
C602 0.1  
C604 0.1  
CRST  
C644  
4700p  
DVDD_IN  
DVDD_OUT  
HOLDC  
C613 22 6.3V  
OR GATE  
REG5_OSC  
SLEEP  
IC604  
TC7S32FU(TE85L)  
OSC_OUT  
SLEEP_IN  
RST_IN  
PGND2  
PGND5  
PGND5  
POWFB  
L5_1  
C658  
22  
10V  
RST_CONT  
R631 470k  
R632 1M  
V
XRST  
L607  
100µH  
D604  
MA22D2800LS0  
G
REG_IN  
REG_OUT  
SUS_IN  
PGND2  
PGND5  
VBUSSEL  
CLM  
REG5_REG  
SUSPEND  
OVER WRITE HEAD DRIVE,  
R657  
220  
R640  
1M  
POWER CONTROL  
IC601  
SC901585VAR2  
(Page 25)  
RST_OUT  
C662 0.01  
R648  
22k  
R641 R642  
1
POWP2  
INP3  
1
∗
TSBV_IN  
TSBV_OUT  
V33R  
REG5_TSBV  
CSP(Chip Size Package)  
INP2  
C615 22 6.3V  
C616 22 6.3V  
CLP  
C651 4.7  
C654 0.1  
D618  
MA2SD3100LS0  
R663  
220  
PGND1  
POWP1  
VPDRV  
RF2  
VSTB_IN  
VSTB_OUT  
BATSEL  
V33RO  
L601  
4.7µH  
R651  
2.2  
A3  
A4  
C641 R616  
0.01 1k  
R654  
2.2M  
DTC2  
C659  
4.7  
INM2  
REG5_VSTB  
D611 MA2SD3100LS0  
C617 22 6.3V  
RF1  
INM3  
C642  
0.022  
IMM1  
DTC3  
C620 0.022  
R605  
10k  
DTC1  
RF3  
R617  
10k  
R629  
2.2M  
VREC  
NC_M1  
V3FB  
3.3V  
NC_A1  
C611 0.01  
A5  
R612  
2.2M  
CL624  
C645  
0.01  
C638  
1000p  
C626  
0.01  
R658  
0
CL604  
F1  
R622  
2.2  
R620  
2.2  
R621  
2.2  
R623  
2.2  
R656  
0
R637  
0
D603  
MA22D2800LS0  
(Page 27)  
D605  
MA2SO3000LS0  
D608  
MA2SO3000LS0  
R668  
0
C635  
47  
6.3V  
C637  
10  
6.3V  
C633  
0.01  
C634  
1
R638  
0
R635  
0
S
S
R653  
0
L605  
100µH  
C622  
10  
6.3V  
C632  
47  
6.3V  
C624  
220p  
R636  
0
C628  
1
Q602  
MCH6617  
R633  
100k  
R650  
2.2M  
Q601,602  
OVER WRITE  
HEAD DRIVE  
-1  
-2  
R660  
0
Q603  
NTHC5513T1  
Q605  
NTHC5513T1  
R619 220  
D606  
MA22D1700LS0  
D607  
B+ SWITCH  
B+ SWITCH  
MA22D1700LS0  
L606  
W601  
W602  
HR601  
C674  
33p  
100V  
Q606,607  
VOLTAGE  
LIMITER  
OVER WRITE  
HEAD  
S
S
-1  
-1  
S
Q606  
RTQ035P02TR  
D617  
MA22D1700LS0  
D616  
MA22D1700LS0  
-1  
-2  
S
S
-1  
-2  
-2  
-2  
J1  
J2  
J3  
Q607  
XP4601-TXE  
Q601  
CPH5614  
R610  
10k  
S
C650  
10  
6.3V  
C649  
0.1  
R609  
220k  
(Page 32)  
C652  
10  
10V  
C653  
10  
10V  
C639 0.1  
D615 MA22D2800LS0  
C647  
0.047  
G1  
I1  
I2  
G2  
G3  
(Page 28)  
(Page 31)  
(Page 29)  
MZ-NH1  
26  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                       
MZ-NH1  
• See page 36 for IC Block Diagram. • See page 24 for Waveforms.  
6-6. SCHEMATIC DIAGRAM – MAIN Section (3/9) –  
(Page 25)  
(3/9)  
F1  
C553  
4.7  
6.3V  
C523  
0.1  
C530  
1
C554  
0.1  
(Page 26)  
C524  
0.01  
R505  
10  
S0  
R526  
0
C519  
0.1  
R510  
0
L503  
10µH  
S0  
S1  
+3V REGULATOR  
S1  
IC502  
R1180Q3018-TR-F  
C561  
1
XLDON  
PLSE_XDC  
LC_DRV1  
LC_DRV2  
PEAK  
XLDON  
PLSE_XDC  
LC_DRV1  
LC_DRV2  
PEAK  
VOUT  
VDD  
GND  
CE  
C536  
0.022  
C537 C539  
1
1
R561  
220k  
BOTM  
C562  
1
BOTM  
OFTRK  
TE  
OFTRK  
TE  
L501  
0
FE  
FE  
ABCD  
NPPO  
AVCC2  
DFTRK  
TON_C  
BOTM  
PEAK  
D
CN  
CPGND  
CLK  
ABCD  
VREF  
VREF  
OFTRK  
A_FS256  
XRST_RF  
SSB_DATA  
SSB_CLK  
ADIP  
R503  
100k  
R504  
100k  
C568  
0.01  
C513  
0.01  
XRST_RF  
SSB_DATA  
SSB_CLK  
ADIP  
LC_DRV2  
LC_DRV1  
R507 2.2k  
R508 2.2k  
C545 0.1  
CCSL2  
CON  
(Page 33)  
BOTM  
PEAK  
C547 0.047  
CN501  
26P  
ADIP  
C569  
0.01  
ADFG  
RF AMP,  
TRK+  
FCS-  
FCS+  
TRK-  
C550 0.047  
S_MON  
APCREF_DA  
VC  
TRK+  
FCS-  
FCS+  
TRK-  
L1  
FOCUS/TRACKING ERROR AMP  
VPP_LPF  
SMON  
PD_BUF  
PD_NI  
PD_I  
S_MON  
S
S_MON  
IC501  
SN761059ZQLR  
A
APCREF_DA  
VC  
-2  
-1  
B
∗
S
APCREF_DA  
RFI  
Q501  
MCH6604  
C
RFI  
CSP(Chip Size Package)  
MDVCC_CTL  
A_FS256  
VIN  
C538  
1000p  
C552  
0.01  
SWITCHING  
AVCC  
JX  
MDVCC_CTL  
A_FS257  
VIN  
L2  
PDO_SOURCE  
PDO_SINK  
A_C  
FB501 XLDON  
PLSE_XDC  
CONT  
PLSE_XDC  
PVCC  
IIN  
JY  
FB502  
0
L507  
0
CL509  
IY  
C570  
4.7  
6.3V  
C573  
1000p  
LDK  
MDVCC  
GND  
F
C503 1000p  
C525  
4700p  
VREF  
VCC  
S1  
C531  
0.01  
C533  
0.01  
S1  
JY  
JX  
IY  
IX  
A
B
VC  
C
D
S0  
S0  
R501 R502  
2.2k 1k  
L502  
10µH  
CL516  
C518  
4.7  
6.3V  
C527  
0.1  
C529  
0.1  
C520  
0.1  
C556  
4.7  
6.3V  
C557  
0.1  
L504  
10µH  
R1  
MDVCC_CTL  
FB503  
0
L505  
10µH  
(Page 33)  
Q502  
2SA1745-6.7-TL  
L506  
10µH  
R514  
47k  
R517  
10k  
R513  
10k  
R515  
10k  
Q502,503  
B+ SWITCH  
C559 R512  
4700p  
R524  
220  
Q504  
2SC4627J-C  
(TX).SO  
0
C558  
1000p  
∗ C574  
470p (US, E18, JE)  
1000p (EXCEPT US, E18, JE)  
Q503  
2SC4738F-Y/  
GR(TPL3)  
RF BUFFER  
R509 C555  
4700p  
R520  
470  
C564  
4.7  
10V  
R516 C560  
47k  
0
C566  
0.1  
RFI  
VIN  
0.1  
D501  
MAZS068008SO  
C565 R511  
0.1  
C567  
4.7  
6.3V  
R518  
47k  
R519  
1k  
0
C526  
100p  
C574  
∗
L1  
L2  
(Page 29)  
(Page 28)  
The components identified by mark 0 or dotted  
line with mark 0are critical for safety.  
Replace only with part number specified.  
MZ-NH1  
27  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
MZ-NH1  
• See page 36 for IC Block Diagram.  
6-7. SCHEMATIC DIAGRAM – MAIN Section (4/9) –  
(Page 27)  
(Page 25)  
(4/9)  
M1  
(Page 29)  
UDP  
UDP  
UDM  
UDM  
(Page 33)  
(Page 26)  
G1  
G2  
G3  
MINUS_MON  
MINUS_MON  
VBUS_MON  
VB_MON  
VBUS_MON  
VB_MON  
CHG_PWM  
CHG_CTL  
CHG_PWM  
CHG_CTL  
CHG_OPR  
CHG_SW  
CHG_OPR  
CHG_SW  
CHG_XRST  
CHG_I_SEL  
CHG_I_CTL1  
CHG_MON  
CHG_I_CTL3  
CHG_CAL  
C405  
0.1  
CHG_XRST  
CHG_I_SEL  
CHG_I_CTL1  
CHG_MON  
CHG_I_CTL3  
CHG_CAL  
R401  
2.2k  
C401  
0.1  
R417  
2.2k  
Q404  
DTC144EETI  
(Page 33)  
INVERTER  
CHG_I_CTL2  
XGUM_ON  
HIDC_MON  
CHG_I_CTL2  
XGUM_ON  
HIDC_MON  
R405  
0
R418  
100k  
AD_SEL  
BAT-  
TYPE2  
CFB  
C457  
2200p  
RF1  
CHG_XRST  
CHG_SW  
IAMP_CAL  
AMP_SEL  
I_CTL2  
CHG_SW1  
BAT+  
IAMP_CTL  
A7CAL_SW  
IN1-  
FB451  
C452  
2200p  
R455  
1M  
CHARGE CONTROL  
IC401  
MM1655LCBE  
CHG_LED  
C415  
0.1  
TYPE1  
WDT  
CN451  
14P  
V0  
LED_CTL  
CL451  
(DC IN 6V)  
LF451  
(USB)  
FB454  
DCIN6V  
-2  
PWR_WAKE  
-1  
NC  
CL453  
(VBUS 5V)  
R458 R453  
2.2M 2.2M  
Q405  
UP04313008S0  
VBUS  
NC  
R403  
2.2  
1/2W  
R404  
1
1W  
LED DRIVE  
DATA-  
DATA+  
NC  
R407  
0
VBUS_MON  
HIDC_MON  
WK_DET  
VGH  
NC  
CL460  
(VBUS GND)  
CL433  
(GND)  
CHG_CTL  
R456 R459  
470k 220k  
FB453  
GND  
SW_A  
SW_B  
GND  
GND  
R415 2.2k  
CHG_PWM  
CHG_OPR  
XGUM_ON  
W431  
W432  
MINUS_MON  
LITHIUM ION  
RECHARGEABLE  
BATTERY  
R411  
100k  
C434  
1000p  
VB_MON  
D401  
FTIJ3TP  
LIP-4WM  
3.7V 370mAh  
Q432  
FZT688B-TP  
Q431  
SI2302DS-T1  
S431  
S
R421  
100k  
BATTERY INSERT  
DETECT  
Q401  
FZT968TA  
Q431,432  
CHARGE  
REGULATOR  
C402  
22  
10V  
C403  
22  
10V  
R431  
1M  
R432 R433  
0.47  
C406  
0.1  
R412 R413 R414  
2.2M 220k  
CONTROL  
1
0
(US, E18, JE)  
D451  
MAZW068H0LS0  
C432  
2200p  
C575  
1000p  
CHG_LED  
CHG_LED  
S1  
S2  
C460  
1 (E18, JE)  
470p (EXCEPT E18, JE)  
(Page 32)  
MZ-NH1  
28  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
MZ-NH1  
• See page 36 for IC Block Diagrams. • See page 24 for Waveform.  
6-8. SCHEMATIC DIAGRAM – MAIN Section (5/9) –  
(Page 26)  
(5/9)  
L1  
L2  
N1  
(Page 27)  
XRST1  
N2  
N3  
L903  
10µH  
RESET SIGNAL  
GENERATOR  
C914  
10  
6.3V  
C957  
0.1  
C954  
0.1  
IC903  
XC61CN1702NR  
C922  
22  
6.3V  
C951  
100  
6.3V  
C952  
100  
6.3V  
NC  
VIN  
C925  
0.1  
C928  
100p  
C929  
1000p  
R952 R953  
47k 47k  
C949  
22  
10V  
VSS  
VOUT  
R956  
47k  
D1  
D3  
-1 -2  
R914  
10k  
Q951  
XP4601-TXE  
WAKE UP SWITCH  
(Page 25)  
C905  
1
R954  
470k  
R957  
470k  
R923  
0
L906  
220µH  
REG5_VSTB  
D901  
MA2Z748001S0  
D904  
MA2Z748001S0  
C927 100p  
R958  
0
D2  
R941  
0
R910 R908  
22k  
R912  
220k  
D903  
MA2Z748001S0  
22k  
R924  
470k  
C901  
0.1  
C909 10 16V  
C910 10 16V  
C911 10 16V  
C912 10 16V  
C913 10 16V  
R931  
0
XRST1  
CRST1  
SLEEP  
CLK  
4FS  
C902  
0.1  
SL901  
XRSTIADJ  
SEQSEL  
MOT  
C931 2.2  
OTC1  
RF1  
SCK0  
XCS_PWR_IC  
SDO0  
SCK  
C906  
1
C917  
0.1  
INM1  
CTL  
STRB  
DATA  
VREF  
L901  
100µH  
L902  
100µH  
C932 0.01  
VG  
LG  
POWER CONTROL  
GND  
IC901  
SC901584EPR2  
CL935  
PGND3  
VB  
REGI1  
REGO1  
REGC1  
REGI2  
REGO2  
REG2G  
REGC2  
N4  
(Page 31)  
M1  
VGSEL2  
VGSEL1  
INM2  
RF2  
C934 2.2  
R925  
47k  
C939  
22  
6.3V  
R933 220k  
R934 22k  
(Page 28)  
C919  
0.022  
DTC2  
R904  
1M  
C940  
22  
6.3V  
R907  
10k  
C936 2.2  
R935 100k  
R936 47k  
R926  
100k  
R929  
100k  
C948  
22  
6.3V  
D902  
MA2Z748001S0  
R927  
1k  
C938 2.2  
R937 22k  
R938 47k  
D906  
MA2Z748001S0  
R939  
47k  
L904  
10µH  
MUTEON  
D_ENVG  
R944  
0
R902  
100  
R945  
0
VOUT  
N5  
NC  
VIN  
CE  
VSS  
IC902  
XC62HR5502WR  
+5.5V REGULATOR  
C942  
1
C916  
10  
6.3V  
C924  
47  
6.3V  
C955  
22  
10V  
C920  
0.1  
R940  
220k  
C941  
1
N6  
MZ-NH1  
29  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
MZ-NH1  
• See page 36 for IC Block Diagrams. • See page 24 for Waveforms.  
6-9. SCHEMATIC DIAGRAM – MAIN Section (6/9) –  
(6/9)  
+2.1V REGULATOR  
IC302  
XC6219B212MR  
R308  
0
Q301  
2SA2018TL  
SDO0  
SCK0  
C327  
1
SDO0  
SCK0  
B+ SWITCH  
R304  
100k  
VIN  
VSS  
CE  
R301  
1k  
C303  
0.1  
C321  
47  
6.3V  
C320  
2.2  
10V  
XOPT_CTL  
R314  
0
C319  
0.1  
L303  
10µH  
(Page 33)  
C328  
1
C202  
1
R201  
47k  
R306  
10k  
C323  
10  
6.3V  
OPT_DET  
C325  
0.1  
R305  
100  
OPT_DET  
XJACK_DET  
DIN1  
DIN1  
C324  
0.1  
C102  
1
R101  
47k  
XJACK_DET  
DIN1  
ADDT  
XJACK_DET  
FB303  
J301  
XOPT_CTL  
ADDT  
FB301  
FB101  
FB201  
FB304  
LINE IN  
(OPT)  
XOPT_CTL  
ADDT  
R315  
0
FS256  
FS256  
C310  
10  
6.3V  
LRCK  
XBCK  
OPT_DET  
C201  
100p  
C101  
100p  
LRCK  
BCLK  
LIN  
XBCK  
FS256  
LRCK  
MCLK  
LRCK  
CDTI  
CCLK  
CSN  
XBCK  
MPWR  
MRF  
XCS_ADC  
XPD_ADC  
XMIC_DET  
C318  
2.2  
10V  
C312  
47 6.3V  
XCS_ADC  
XPD_ADC  
XMIC_DET  
(Page 33)  
SDO0  
R309 1k  
R310 1k  
MVCM  
MVSS  
MVDD  
MICR  
A/D CONVERTER,  
MIC AMP  
R206 R207 R107 R106  
10k  
SCK0  
C311 0.1  
22k  
22k  
10k  
XCS_ADC  
XPD_ADC  
IC301  
AK5356VN-L  
C313 47 6.3V  
C305 C304  
100p 100p  
PDN  
R307  
100  
XMIC_DET  
J302  
MIC  
C314 0.1  
FB202  
FB102  
FB302  
C315 10 6.3V  
C316 22 6.3V  
(PLUG IN POWER)  
C208  
4.7  
6.3V  
C205 C105  
0.1  
R313  
10  
0.1  
C108  
4.7  
6.3V  
C308  
1000p  
C307  
1000p  
C206  
1000p  
C106  
1000p  
C204  
2200p  
C104  
2200p  
C107  
47  
4V  
C207  
47  
4V  
E1  
E2  
BP312  
(Page 25)  
(Page 31)  
MZ-NH1  
30  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
MZ-NH1  
• See page 36 for IC Block Diagram.  
6-10. SCHEMATIC DIAGRAM – MAIN Section (7/9) –  
(Page 26)  
(7/9)  
O1  
O2  
BP352  
(Page 30)  
N1  
Q1  
N2  
N3  
(Page 33)  
R361  
10  
R360  
0
D_VREG0  
D_VCONT_PWM  
DCLSOUTR  
DCLSOUTL  
BEEP  
D_VREG0  
D_VCONT_PWM  
DCLSOUTR  
DCLSOUTL  
BEEP  
D_ENVG  
D_ENREG  
D_EN2  
D_ENVG  
D_ENREG  
D_EN2  
C364  
2.2  
D_EN1  
D_EN1  
(Page 33)  
(Page 32)  
FS512  
C361  
47  
6.3V  
FS512  
XMUTE  
XMUTE  
R354  
0
FS512  
XMUTE  
WK_DET  
WK_DET  
D_EN1  
REC_KEY  
RMC_KEY  
HALF_LOCK  
FFCLR  
REC_KEY  
RMC_KEY  
HALF_LOCK  
FFCLR  
Q352  
UN9113J-(TX).SO  
D_EN2  
D_ENREG  
MUTING  
CONTROL  
XCS_PWR_IC  
XCS_PWR_IC  
SWITCHING DRIVER,  
HEADPHONE AMP  
ENVG  
MODE_B  
BEEP_IN  
DIN2  
VSS  
CL  
BEEP  
CH  
VG  
DCLSOUTL  
DCLSOUTR  
R363  
R364  
0
0
R351  
1k  
(Page 29)  
IC351  
CXD9811K(TE4)  
F351  
0.25A  
125V  
C370  
1
R355  
1M  
DIN1  
NC  
D352  
DF8A6.8FK(TE85R)  
OUT_BEEP1  
VSS0  
OUT_BEEP2  
VSS0  
R357  
0
J351  
OUT1  
OUT2  
/LINE OUT  
VDD01  
VDD02  
FB355  
RVDD  
DTCK  
RMC_DTCK  
RMC_KEY  
FB354  
FB353  
FB357  
KEY_R  
RGND  
FB351  
R352  
47k  
MUTEON  
C151 0.1  
C251 0.1  
FB151  
FB251  
R353  
22k  
D_VCONT_PWM  
Q351  
NTHD4508NT1G  
R358  
0
CL362  
C154  
220  
2.5V  
MUTING  
R356  
0
L152  
47µH  
N4  
N5  
S
L252  
47µH  
-1  
S
C254  
220  
2.5V  
R154  
2.2k  
-2  
R254  
2.2k  
Q151  
2SC5585TL  
Q251  
2SC5585TL  
Q151,251  
MUTING  
C352  
0.1  
R251  
2.2k  
R151  
2.2k  
C351  
0.47  
N6  
P1  
(Page 32)  
MZ-NH1  
31  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
MZ-NH1  
• See page 36 for IC Block Diagrams. • See page 24 for Waveform.  
6-11. SCHEMATIC DIAGRAM – MAIN Section (8/9) –  
(Page 26)  
(8/9)  
C873  
2p  
C877  
0.1  
C878  
0.1  
X872  
32.768KHz  
CN471  
11P  
REAL TIME  
CLOCK  
REC_KEY  
SET_KEY_1  
PAUSE  
REC_KEY  
SET_KEY_1  
PAUSE  
REC_LED  
XCS_LED  
SDI1  
REC_LED  
XCS_LED  
SDI1  
C871  
0.1  
R473 100  
R474 100  
LCD  
CIN  
VDD  
MODULE  
SDO1  
D871  
MA2SD32008S0  
VSS  
IC871  
R2061K01-E2  
VCC  
VSB  
SDO1  
CS_RTC  
LCD_RST  
SCK1  
R475  
0
CE  
LCD_RST  
SCK1  
R471  
0
DVDD  
DGND  
+3.3V REGULATOR  
IC872  
R1180Q331C-TR-F  
LEVEL SHIFT  
IC873  
TC7SZ126AFE  
CE  
VDD  
SDI0  
GND  
R871  
220k  
GND VOUT  
T1  
R872  
0
C879  
1
C880  
1
C874  
47  
6.3V  
T2  
T3  
VCC  
C881  
0.1  
T4  
CHG_LED  
T5  
T6  
IC882  
R1180Q221B-TR-F  
R492  
4.7k  
CE  
VDD  
CN491  
8P  
GND VOUT  
SET_KEY_2  
SET_KEY_1  
DRAM_HOLD_DET  
FFCLR  
D883  
MA2Z748001S0  
SET_KEY_2  
SET_KEY_1  
SGND  
+2.2V REGULATOR  
(Page 33)  
CHG_LED  
WK_DET  
REC_LED  
DOWNLOAD  
DGND  
SWITCH  
MODULE  
WK_DET  
R882  
100k  
R885  
47k  
R894  
10k  
R493  
0
REC_LED  
REC_KEY  
R887  
220k  
S
R888  
0
Q884  
SI1410EDH-T1  
-1  
-1  
-2  
-2  
Q881  
Q882  
XP4314-TX  
Q883,884  
VOLTAGE  
Q883  
XP4314-TX  
UN9214J-(TX).SO  
REGULATOR  
CONTROL  
B+ SWITCH  
DETECT  
LEVEL  
IC881  
XC61CN3102NR  
T7  
SHIFT  
FFCLR  
FFCLR  
WK_DET  
REC_KEY  
C883 R881 C884  
1M  
C890  
0.1  
R884  
220k  
C888  
0.1  
R886  
2.2M  
WK_DET  
REC_KEY  
1
0.01  
RMC_KEY  
DRAM_ALONE  
RMC_KEY  
HALF_LOCK  
XCS_PWR_IC  
DRAM_VDD_CLR  
HALF_LOCK  
XCS_PWR_IC  
REG5_REG  
(Page 31)  
BL891  
S891-1  
PROTECT  
DETECT  
S891  
-1  
XRST2  
RST_CONT  
SDO0  
PROTECT  
R891  
100k  
R892  
100k  
XRST2  
RST_CONT  
SDO0  
UMD_PROTECT  
XCS_NV  
SDI0  
-2  
S891-2  
XCS  
VCC  
SCK0  
Hi-MD PROTECT  
DETECT  
SCK0  
SO  
XHOLD  
NC  
BL892  
4FS  
R895  
0
R893  
0
4FS  
NC  
SLEEP  
SCK0  
SDO0  
IC891  
AK5614CN  
SLEEP  
XWP  
GND  
SCK  
SI  
S892  
RMC_DTCK  
XRST  
RMC_DTCK  
XRST  
(HALF LOCK)  
HALF_LOCK  
S893  
(OPEN/CLOSE DETECT)  
BL894  
3.3V  
3.3V  
REG5_VSTB  
REG5_TSBV  
REG5_REG  
REG5_VSTB  
O/C_SW  
(Page 26)  
REG5_TSBV  
REG5_REG  
EEPROM  
S895  
HOLD  
REG5_OSC  
C891  
0.1  
ON  
OFF  
REG5_OSC  
REG4_DVDD  
REG_F  
REG4_DVDD  
REG_F  
XHOLD_SW  
REG_DACVREFH  
REG_DACVREFH  
P1  
(Page 31)  
CHG_LED  
S1  
S2  
BP471  
(Page 28)  
MZ-NH1  
32  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                       
MZ-NH1  
• See page 24 for Waveform. • See page 42 for IC Pin Function Description.  
6-12. SCHEMATIC DIAGRAM – MAIN Section (9/9) –  
SDO0  
(9/9)  
SDO0  
SCK0  
SCK0  
WK_DET  
(Page 30)  
T1  
T2  
T3  
T5  
R876  
0
REG5_REG  
R846  
47k  
T4  
CHG_LED  
C847  
0.1  
CHG_LED  
C851  
0.1  
Q803  
2SC4738F-Y/GR  
(TPL3)  
T6  
(Page 32)  
C855  
0.1  
T7  
WAKE UP  
SWITCH  
R835  
470k  
R857  
0
SUSPEND  
R828  
2.2k  
R810 R813  
0
SUSPEND  
USB_HOLD  
USB_HOLD  
0
RECP  
R834  
220k  
SL801  
RECP  
EFM_CLK  
R854  
0
R858  
2.2k  
EFM_CLK  
EFM  
C813  
0.047  
EFM  
R845  
220k  
XCS_REC_DRV  
CLV_CON_U  
SLD_PWM  
(Page  
26)  
XCS_REC_DRV  
VBUS_DET  
VBUS_DET  
R836  
47k  
D_VCONT_PWM  
CHG_OPR  
4FS  
FS4  
FRDR  
VBUS_MON  
FR1  
FF1  
TF1  
TR1  
VBUS_MON  
MINUS_MON  
CHG_MON  
VB_MON  
MINUS_MON  
CHG_MON  
VB_MON  
XCS_REG_DRV  
FFDR  
R852  
0
GND_SW  
CS_RTC  
JOG_A  
TFDR  
CS_RTC  
TRDR  
HIDC_MON  
CHG_SW  
SPRD  
SFDR  
ADIP  
R869  
1M  
HIDC_MON  
CHG_SW  
ADFG  
JOG_B  
RTCK  
XGUM_ON  
CHG_XRST  
CHG_I_CTL1  
CHG_I_CTL2  
CHG_I_CTL3  
CHG_I_SEL  
CHG_CTL  
VBUS_DET  
SSB_DATA  
SSB_CLK  
R855  
R856  
0
0
DCLSOUTL  
DCLSOUTR  
XGUM_ON  
CHG_XRST  
CHG_I_CTL1  
CHG_I_CTL2  
CHG_I_CTL3  
CHG_I_SEL  
CHG_CTL  
VBUS_DET  
SSB_DATA  
SSB_CLK  
HIMD_PROTECT  
LDPEN  
CHG_TYPE2  
DRAM_HOLD_DET  
DRAM_VDD_CLR  
AD2ENDF  
TEST  
DCLSOUTL  
DCLSOUTR  
VREFR  
IAMP_CAL  
NC  
UMD_PROTECT  
PLSE_XDC  
D_VCONT_PWM  
CHG_OPR_LED  
XCS_REC_DRV  
AOUTR  
AOUTL  
(Page  
28)  
VREFL  
DRAM_HOLD_DET  
DRAM_VDD_CLR  
VIN  
VIN  
CHG_PWM  
CHG_CAL  
R839  
0
CHG_PWM  
CHG_CAL  
AD3EXTC  
ADC3VREFH  
APCREF_DA  
DACVREFH  
PLL3EXTCO  
PLL3EXTCI  
PLL2EXTCO  
PLL2EXTCI  
XRST  
CHG_OPR  
APCREF_DA  
CHG_OPR  
REG_DACVREFH  
SRAM_MODE  
HSALF  
XRST_MTR_DRV  
SLD_CON_W  
SLD_CON_V  
SLD_CON_U  
SLD_PWM  
SLD_MON_U  
SLD_MON_V  
SLD_MON_W  
TF1  
R823  
10k  
R840  
0
XRST_MTR_DRV  
SLD_CON_W  
SLD_CON_V  
SLD_CON_U  
SLD_PWM  
SLD_MON_U  
SLD_MON_V  
SLD_MON_W  
TF1  
C814 C817 C843  
0.1 0.1 0.1  
MON0  
R862  
0
MON1  
C812  
1
REG5_REG  
C810  
0.1  
MON2  
XRST  
SL803  
MON3  
HALF_LOCK  
MON4  
HALF_LOCK_SW  
RADIO_ON  
REC_KEY/DOWNLOAD  
RST_CONT  
RMC_KEY  
BATT_MINUS_MON  
VBUS_MON  
WK_DET  
HIDC_MON  
DCIN_DET  
SET_KEY_2  
SET_KEY_1  
VREF_MON  
CHG_MON  
VB_MON  
D_VREGO  
ADC1EXTC  
APC  
MON5  
REC_KEY  
MON6  
RST_CONT  
MON7  
TR1  
RMC_KEY  
TR1  
MON8  
ZI2  
R814 10k  
MINUS_MON  
VBUS_MON  
WK_DET  
R827  
10  
ZI2  
MON9  
ZI1  
XLDON  
ZI1  
XLSRCK  
TAT  
FR1  
FR1  
(Page  
25)  
FF1  
HIDC_MON  
FF1  
TAN  
CLV_CON_W  
CLV_CON_V  
CLV_CON_U  
CLV_PWM  
CLV_MON_U  
CLV_MON_V  
CLV_MON_W  
R870 0  
CLV_CON_W  
CLV_CON_V  
CLV_CON_U  
CLV_PWM  
CLV_MON_U  
CLV_MON_V  
CLV_MON_W  
NAR  
C825 1000p  
C826 1000p  
SET_KEY_2  
SET_KEY_1  
VREF  
IDO  
SAK  
LRCKI  
R837 2.2k  
C827 0.1  
CHG_MON  
VB_MON  
D_VREG0  
XBCKI  
DATAI  
SYSTEM CONTROLLER,DIGITAL SIGNAL PROCESSOR  
SI3  
IC801  
CXD2681-222GG  
C803 0.01  
SO3  
SO  
SI  
∗
SO  
SI  
SCK3  
CSP(Chip Size Package)  
D803  
MA2SD32000SB  
R868  
0
SI4  
DCHG  
XLDON  
PLSE_XDC  
LC_DRV1  
LC_DRV2  
PEAK  
XLDON  
PLSE_XDC  
LC_DRV1  
LC_DRV2  
PEAK  
SO4  
ADRT  
R847  
0
SCK4  
AUX1  
TE  
S_MON  
SCS3  
TE  
SCS4  
SE  
ZI2  
ZI1  
HI_Z_SLD  
HI_Z_SPDL  
SET_CODE0  
SET_CODE1  
SET_CODE2  
SET_CODE3  
D_EN1  
ADRB  
BOTM  
BOTM  
ADIO  
OFTRK  
TE  
VC  
FE  
R830  
0
OFTRK  
TE  
VC  
FE  
FE  
ABCD  
FE  
ABCD  
ABCD  
BOTM  
PEAK  
ABCD  
BOTM  
VREF  
D_EN1  
D_EN2  
D_ENVG  
VREF  
PEAK  
XRST_RF  
SSB_DATA  
SSB_CLK  
ADIP  
C809 0.1  
R817 1k  
R821 2.2M  
R820  
220  
XRST_RF  
SSB_DATA  
SSB_CLK  
ADIP  
D_EN2  
CLTV  
D_ENVG  
DADT  
FILO  
(Page 27)  
R818 R819  
2.2k 1k  
C808 R822  
1
FILI  
1M  
LC_DRV1  
LC_DRV2  
R815 220k  
PWM_L1  
PWM_L2  
I2C_1  
PCO  
S_MON  
APCREF_DA  
VC  
RFI  
S_MON  
APCREF_DA  
VC  
RFI  
C805 0.47  
C804 0.01  
ASYI  
I2C_2  
ASYO  
RFI  
REG5_REG  
R849  
R848  
0
0
C861  
22p  
R811 R812  
10k 100k  
RFI  
JTAG0  
EBIFVSS7  
EBIFVDD7  
EBIFVSS6  
EBIFVDD6  
EBIFVSS5  
EBIFVDD5  
EBIFVSS4  
EBIFVDD4  
EBIFVSS3  
EBIFVDD3  
EBIFVSS2  
EBIFVDD2  
EBIFVSS1  
EBIFVDD1  
EBIFVSS0  
MDVCC_CTL  
A_FS256  
VIN  
MDVCC_CTL  
A_FS257  
VIN  
JTAG1  
CLKIN2  
FS256  
FS256  
ADDT  
LRCK  
XBCK  
R864  
R843  
R863  
R809  
0
0
0
0
FB810  
0
Q801,802  
ADDT  
B+ SWITCH  
Q802  
2SK1838-TE85L  
FB809  
FB802  
0
0
R859  
1M  
UDP  
LRCK  
UDM  
XBCK  
C801 10p  
X802  
22.5792MHz  
S
FB807  
0
EBIFVDD0  
OSCI  
D_VCONT_PWM  
FS512  
R808 1k  
C802  
10p  
SRAMVSS1  
SRAMVDD1  
S
(Page 28)  
D_VCONT_PWM  
FS512  
OSCO  
UPUEN  
UOSCI  
UOSCO  
FS512  
FB808  
0
FS512  
D_ENVG  
D_EN1  
D_ENVG  
D_EN1  
RMC_DTCK  
DTCK  
Q801  
XP152A12C0MR  
R804 22  
R805 22  
R860  
1M  
UDP  
D_EN2  
D_EN2  
UDM  
D_VREG0  
D_ENREG  
XMUTE  
USB_HOLD  
SUSPEND  
D_VREG0  
D_ENREG  
XMUTE  
USBHOLD  
SUSPEND  
+2.5V REGULATOR  
BEEP  
(Page  
31)  
BEEP  
IC804  
XC61CC2502NR  
DCLSOUTR  
DCLSOUTL  
OPT_DET  
XJACK_DET  
DIN1  
DCLSOUTR  
DCLSOUTL  
OPT_DET  
XJACK_DET  
DIN1  
R802  
47  
VOUT  
VIN  
VSS  
NC  
R801  
4.7k  
X801  
48MHz  
FB801  
C849  
0.1  
XOPT_CTL  
ADDT  
R833  
0
C852  
0.1  
XOPT_CTL  
ADDT  
REG4_DVDD  
C822  
0.1  
C823  
0.1  
FS256  
C845  
0.1  
FS256  
C811  
0.1  
L802  
22µH  
LRCK  
C821 100p  
C835  
0.1  
R850  
0
LRCK  
XBCK  
L870 10µH  
XBCK  
(Page 30)  
XCS_ADC  
XPD_ADC  
XMIC_DET  
REG_F  
C818  
47  
6.3V  
C820  
0.1  
XCS_ADC  
XPD_ADC  
XMIC_DET  
3.3V  
C839  
0.1  
R824  
10  
C816  
47 6.3V  
REG5_VSTB  
REG5_OSC  
REG5_REG  
D801 MA2SD3100LS0  
R1  
CL8007  
CL8003  
L801  
(Page 27)  
(Page 31)  
Q1  
MZ-NH1  
33  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                     
MZ-NH1  
6-13. PRINTED WIRING BOARD – MAIN Section (1/2) –  
: Uses unleaded solder.  
• Semiconductor  
Location  
1
2
3
4
5
6
7
8
9
10  
11  
Ref. No. Location  
MAIN BOARD (COMPONENT SIDE)  
D152  
D252  
D301  
D352  
D401  
D602  
D604  
D605  
D606  
D607  
D608  
D613  
D615  
D905  
G-10  
F-10  
D-9  
G-10  
I-9  
H-6  
F-9  
I-5  
I-6  
I-5  
I-4  
D-7  
F-8  
C-10  
A
B
C
D
E
S891  
S891-1  
(PROTECT DETECT)  
-1  
S891-2  
Hi-MD  
PROTECT DETECT  
-2  
L907  
L906  
S893  
IC602  
IC603  
IC882  
E-7  
F-7  
E-8  
K
A
OPEN/CLOSE  
DETECT  
D905  
Q301  
Q401  
Q432  
Q601  
Q602  
Q603  
Q604  
Q605  
Q611  
Q801  
C-9  
H-8  
H-7  
J-5  
I-5  
F-6  
D-6  
F-7  
E-7  
E-6  
B C E  
Q301  
D301  
R304  
R306 C302  
K
FB303  
A
S431  
BATTERY INSERT  
DETECT  
C885  
DIN  
DGND  
DVCC  
R881  
2
J301  
D613  
R305  
1
4
R645  
LINE IN  
(OPT)  
Q604  
1E  
1B  
2C  
1C  
2B  
2E  
IC882  
R643  
R603  
3
Q611  
D
D
D
S
D
G
R301  
R634  
R859  
FB304  
R630  
L702  
L701  
D
+
C621  
5
4
Q801  
L607  
G
S
1
IC6023  
4
3
2
D604  
+
D615  
C653  
C639  
+
C616  
1
L704  
IC603  
+
C652  
F
2G 2S 1G 1S  
C651  
Q605  
2D 2D1D 1D  
C659  
L703  
C812  
2G 2S 1G 1S  
D252  
C654  
Q603  
2D 2D1D 1D  
C633  
R651  
L601  
K
A
D352  
1
4
8
5
J351  
i /LINE OUT  
D152  
G
H
R648  
RVDD  
DTCK  
R830  
C611 R631  
C808  
KEY_R  
RGND  
R801 R814  
R849  
L605  
L606  
R822 R819 R847  
R821 R818 R820 R839  
R817 C809  
R857  
R413 R412  
E
Q432  
D602  
Q401  
R411  
A
K
R835  
B
E
C646 R620 C648 R621  
C
C
K
A
D605  
R824  
1S  
1G  
2D  
1D  
2G  
2S  
R660  
B
C649  
Q602  
D607  
I
1
10  
+
+
C154  
C254  
K
A
D401  
R869  
C663  
R862  
2D  
2G  
S
K
A
D606  
D608  
CN451  
(USB)  
Q601  
1D  
C153  
C155  
11  
(11)  
1G  
LF451  
J
1-861-115-  
MZ-NH1  
34  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
MZ-NH1  
6-14. PRINTED WIRING BOARD – MAIN Section (2/2) –  
: Uses unleaded solder.  
• Semiconductor  
1
2
3
4
5
6
7
8
9
10  
11  
12  
Location  
LITHIUM-ION  
RECHARGEABLE BATTERY  
LIP-4WM  
Ref. No. Location  
MAIN BOARD (CONDUCTOR SIDE)  
(CHASSIS)  
D431  
D451  
D455  
D456  
D457  
D491  
D501  
D601  
D603  
D609  
D610  
D611  
D614  
D616  
D617  
D618  
D801  
D803  
D871  
D881  
D882  
D883  
D884  
D901  
D902  
D903  
D904  
D906  
I-5  
I-6  
I-5  
I-7  
J-7  
J-12  
D-12  
H-8  
G-7  
I-7  
A
B
C
D
E
F
R912  
(US, E18, JE)  
C575  
S892  
(HALF LOCK)  
R906  
R903  
L902  
L901  
R511 C565  
E C B  
D904  
16  
+
+
C922  
C949  
C894  
S895  
+
+
+
C913  
C912  
C911  
HOLD  
C903  
R954  
Q504  
C566  
R516  
R515  
2
1
4
L503  
R505  
SL891  
SL892  
OFF  
ON  
C925  
CL935  
IC903  
2
SL901  
I-7  
+
C553  
17  
18  
1
3
C902  
E C B  
F-8  
F-5  
I-7  
I-7  
I-7  
H-11  
F-11  
E-8  
C-8  
C-8  
C-8  
D-8  
C-3  
C-3  
C-3  
B-3  
C-3  
64  
C554  
C536  
C931  
Q503  
R513  
+
C518  
C520  
D906  
R956  
C433  
C431  
R957  
C932  
+
C910  
C909  
D882  
1C 2B 2E  
L505  
R514  
IC881  
K
K
A
A
Q951  
E
B
+
1
3
4
2
1
IC901  
C523  
R525  
R945 1E 1B 2C  
3
Q502  
1
2
4
3
1
R953  
R510  
FB503  
C906  
U
C917  
C
D881  
C552  
N
IC501  
C884  
A
K
C558  
D883IC502  
C519  
C934  
32  
33  
50  
C529  
C527  
R934  
49  
1E  
1B  
2C  
1C  
2B  
2E  
L501  
IC902  
34  
48  
4
5
Q881  
M702  
(SLED)  
R939  
C561  
D902  
C513  
R890  
D884  
2S  
2D  
1G  
1S  
R927  
V
W
L904  
R935  
+
R904  
R907  
C948  
D
D
G
D
D
S
2G  
1D  
C522  
C521  
D501  
SL894  
R936  
R886  
R938  
R937  
Q501  
M703  
R888  
2E  
2B  
1C  
2C  
OVER WRITE  
HEAD UP/DOWN  
+
M
C955  
1B  
1E  
R947  
C327  
1
CL516  
CN501  
R946  
3
RB701  
R201  
R103  
R203  
R887 C888  
26  
L802  
+
+
C316  
C313  
IC302  
(CHASSIS)  
U
FB201  
+
C570  
+
C819  
4
5
IC872  
IC605 3  
IC301  
IC302  
IC351  
IC401  
IC501  
IC502  
IC601  
IC604  
IC605  
IC701  
IC801  
IC804  
IC871  
IC872  
IC873  
IC881  
IC891  
IC901  
IC902  
IC903  
E-4  
D-5  
G-4  
H-5  
C-11  
C-9  
H-7  
E-7  
E-7  
F-6  
H-9  
E-8  
G-11  
E-8  
G-11  
C-7  
F-11  
C-4  
C-6  
B-6  
R101  
CN701  
FB502  
C706  
2
L804  
L803  
M701  
(SPINDLE)  
C880  
2
1
BP801  
C328  
D871  
FB101  
RB702  
+
C705  
C315  
4
1
C879  
R860  
10  
1
3
4
+
OPTICAL PICK-UP  
BLOCK  
C108  
14  
V
W
CL509  
10  
Q802  
R640  
N
8
R307 C308  
R106  
R706IC80412  
4
ABX-U  
+
+
28  
15  
C107  
CL603  
15  
7
3
C573  
BP701  
29  
14  
3
4
1
5
J302  
MIC  
C104  
C204  
C105  
C205  
R864 C852  
C835  
IC301  
IC604  
C322  
C319  
D611  
(PLUG IN POWER)  
21  
1
D803  
A
K
R893  
C892  
C207  
R868  
IC701  
22  
28  
+
FB302  
FB202  
C320  
FB501  
SL801  
1
+
C617  
+
C811  
5
1
+
C312  
+
C318  
20  
D614  
6
C612  
R813  
FB803  
42  
1
R609  
C647  
C311  
A
K
IC891  
SL803  
43  
56  
C855  
C821  
16  
10  
R650 R633  
G
S
D
D
11  
15  
CL8003  
Q606  
D
1E  
1C  
R637  
R638  
CL624  
BP312  
CL362  
1B  
2C  
1E  
2B  
2E  
1C  
2B  
2E  
R364  
R363  
D
Q404  
E C B  
R656  
R636  
R635  
(CHASSIS)  
X802  
IC873  
A
K
D603  
Q405  
1B  
2C  
R418  
R403  
IC871  
G
H
I
C626  
4
5
3
1
+
C356  
CL604  
7
1
R617  
BP352  
Q151  
Q251  
Q351  
Q352  
Q404  
Q405  
Q431  
Q501  
Q502  
Q503  
Q504  
Q606  
Q607  
Q802  
Q803  
Q881  
Q882  
Q883  
Q884  
Q951  
I-4  
H-4  
I-4  
+
C874  
C642  
C641  
R616  
3
1
8
28  
22  
+
C362  
FB355  
R808  
CL8007  
4
6
12  
BP351  
R604  
IC351  
10  
D801  
R641  
R642  
C643  
I-4  
7
9
X872  
C368  
R404  
F351  
R355  
FB354  
FB353  
FB357  
14  
G-6  
G-5  
I-4  
C410  
IC601  
R354  
C367  
15  
21  
R455  
X801  
R846  
C407  
C370  
R356  
D-9  
C-9  
B-9  
B-11  
G-5  
G-5  
E-8  
H-12  
C-7  
C-8  
D-8  
D-8  
C-6  
IC801  
Q803  
CN491  
R416 C415  
R407  
IC401  
FB151  
Q251  
FB801  
R493  
+
C613  
8
FB251  
Q351  
D618  
E C B  
C625  
C604  
2D  
2G  
C636 C630  
C602  
C662  
SWITCH  
MODULE  
R402  
2D  
1D  
1D  
2S  
1G  
1S  
+
C856  
K
A
Q151  
B C E  
D610  
C406  
R456  
B C E  
+
C402  
1
A
K
Q352  
D609  
C352  
R352  
C861  
C804  
R431  
D
R459 R458  
C351  
R471  
D617  
K
+
C403  
C252  
R453  
K
G
S
A
C826 R492  
C825 R491  
K
1
11  
D431  
C457  
C851  
A
K
FB453  
D451  
R475  
A
K
K
A
A
Q431  
C460  
R474  
R473  
C306  
D455  
K
A
CN471  
(EXCEPT US, E18, JE)  
CL451  
D616  
CL433  
(GND)  
11  
(11)  
D491  
1-861-115-  
C822  
(DC IN 6V)  
CL460  
(VBUS GND)  
CL453  
(VBUS 5V)  
BP471  
J
LCD  
MODULE  
HR601  
OVER WRITE HEAD  
(CHASSIS)  
(CHASSIS)  
MZ-NH1  
35  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                       
MZ-NH1  
• IC Block Diagrams  
IC301 AK5356VN-L  
IC401 MM1655LCBE  
21  
20 19  
18 17  
16  
15  
24  
23  
22  
21  
20 19 18 17  
MICR  
22  
23  
A/D  
CONVERTER  
RESET  
14 PDN  
13 CSN  
BAT–  
RF1  
25  
26  
27  
MVDD  
16 TYPE2  
15 CFB  
CONTROL  
REGISTER  
INTERFACE  
MVSS  
MVCM  
24  
25  
IAMP_CAL  
12  
CCLK  
11 CDTI  
VCOM  
AMP_SEL  
28  
14 IAMP_CTL  
MRF  
MPWR  
+
–
26  
27  
MIC POWER  
SUPPLY  
LRCK  
MCLK  
BCLK  
10  
9
8
+
–
13 A7CAL_SW  
LIN  
28  
+
–
VREF  
AUDIO  
INTERFACE  
CONTROLLER  
A/D  
CONVERTER  
VREF  
I_CTL2  
29  
30  
CHG_SW1  
VCOM  
12 IN1–  
11 TYPE1  
10 WDT  
BAT+  
VO  
31  
32  
1
2
3
4
5
6
7
TIME  
DIVIDER  
OSC  
SWITCHING  
DET  
SWITCHING  
CIRCUIT  
COMPARATOR  
BLOCK  
CHARGE  
CONTROL  
ON/OFF  
CONTROL  
RECEIVER  
CHARGE CONTROL  
ON/OFF  
C351 CXD9811K  
–
+
ERROR LED  
CONTROL  
9
8
LED_CTL  
21 20 19 18  
17  
16  
15  
VREF  
WAKE-UP  
CONTROL  
CHARGE SWITCH  
CONTROL  
PWR_WAKE  
CHARGE  
PUMP  
BEEP  
AMP  
4
5
6
7
1
2
3
LINE AMP  
(P-N)  
14 VDDO2  
LEVEL  
PRE  
SHIFTER  
DRIVER  
13 CFB  
HEADPHONE AMP  
(N-N)  
12 VREF  
11 VCONT  
10 VREG  
VSS 22  
MCK 23  
VDD 24  
HEADPHONE AMP  
(N-N)  
9
VREGO  
LEVEL  
SHIFTER  
PRE  
DRIVER  
LINE AMP  
(P-N)  
8
VDDO1  
EN1 25  
EN2 26  
ENREG 27  
ENVG 28  
LEVEL  
LEVEL  
LEVEL  
BEEP  
AMP  
SHIFTER SHIFTER SHIFTER  
1
2
3
4
5
6
7
MZ-NH1  
36  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
MZ-NH1  
IC501 SN761059ZQLR  
42 41 40 39 38 37 36 35 34 33 32  
31 30 29  
SERIAL  
INTERFACE  
28 CN  
27 CPGND  
26 CLK  
POWER  
SUPPLY  
VCC2  
VCC  
TEMP  
A+B+C+D  
VREF09  
A-C  
I+J  
NPP  
TON  
CSL  
D-C  
NPPO 43  
AVCC2 44  
OFTRK 45  
MALFA  
MIJ  
VCC2  
OFTRK  
AW+DW  
TON PEAK  
TON BOTM  
ADIP  
AWBPF  
DW  
DWBPF  
OFTTH  
APC  
ADIP-BPF  
VFREF0.4  
I-J  
S-MONITOR  
TE  
T-ON  
TON-C 46  
TWPP  
PK/BTM  
AW  
25 CCSL2  
24 CDN  
ADIP  
CSLO  
BOTM 47  
PEAK 48  
PEAK/  
BOTTOM  
23 ADFG  
D
A
B
C
49  
50  
51  
52  
22 WPP-LPF  
21 SMON  
TPP/WPP  
TE  
FE  
ABCD  
20 PD-BUF  
19 PD-NI  
18 PD-I  
VCC  
AVCC 53  
APC  
JX 54  
JY 55  
LY 56  
17 PDO-SOURCE  
16 PDO-SINK  
RF  
15 A-C  
1
2
3
4
5
6
7
8
9
10 11 12 13  
14  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
MZ-NH1  
IC601 SC901585VAR2  
84  
83 82 81 80  
VG  
79 78 77 76 75 74 73 72 71  
CHARGE PUMP  
70 69 68 67 66 65 64 63 62 61 60 59 58  
57  
VG3  
VIF  
NC A12 85  
56 LATCH  
55 XWKO  
EFM BOTTOM  
PRE DRIVER  
LVDT  
VBUS  
WAKE  
VBUS  
HOLD OUT 86  
RST OUT 87  
CONTROL  
HOLD  
LOGIC  
54 VBUS  
EFM TOP  
PRE DRIVER  
BUFFER  
PVBUS  
53 WAKEC  
52 V33UO  
51 VBUS DET  
PVBUS 88  
CRST 89  
LVDT  
DVDD IN 90  
DVDD OUT 91  
BANDGAP  
REFERENCE  
DAC  
50 VBUSREF  
49 L5 2  
SYSTEM  
HOLDC 92  
OSC OUT 93  
SLEEP IN 94  
RST IN 95  
48 PGND5  
47 PGND5  
2.0V  
RESET  
CONTROL  
46 POWFB  
45 L5 1  
PGND2 96  
RESET  
LOGIC  
H-BRIDGE  
DRIVER  
44 PGND5  
43 VBUSSEL  
42 CLM  
REG IN 97  
REG OUT 98  
SUS IN 99  
PGND2 100  
41 POWP2  
TSBV IN 101  
TSBV OUT 102  
40 INP3  
39 INP2  
POWER SWITCH  
DRIVER  
CIRCUIT  
V33R 103  
38 CLP  
PGND1 104  
37 POWP1  
BUS POWER  
STEP DOWN CONVERTER  
DRIVER  
VSTB IN 105  
VSTB OUT 106  
VPDRV  
36 VPDRV  
35 RF2  
BATSEL 107  
V33RO 108  
SELFPOWER  
STEP UP-DOWN CONVERTER  
DRIVER  
34 DTC2  
RF1 109  
33 INM2  
32 INM3  
INM1 110  
DTC1 111  
VREC 112  
PWM  
DAC  
PWM  
31 DTC3  
30 RF3  
VREC  
VREC STEP UP-DOWN  
CONVERTER DRIVER  
VREF  
BUFFER  
V3 STEP UP-DOWN  
CONVERTER DRIVER  
29 NC M1  
VC  
V3FB  
28  
1
2
3
4
5
6
7
8
9
10  
11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27  
IC602 R1160N121B-TR-FA  
VDD  
GND  
CE  
1
2
3
REGULATOR  
5
4
VOUT  
ECO  
CURRENT  
LIMIT  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
MZ-NH1  
IC701 SC901583EPR2  
56 55  
54 53 52  
51  
50  
49  
48  
47 46 45  
44 43  
VG  
VC  
VC  
VC  
BIAS  
VC LOW  
VOLTAGE  
DETECTOR  
3PHASE  
CONTROL  
CH1  
3PHASE  
CONTROL  
CH2  
ROE  
VI1  
WI1  
1
2
42 VI2  
41 WI2  
GNDW1  
3
40 GNDW2  
VG  
VC  
VC  
VG  
3PHASE  
PRE DRIVER  
CH1  
3PHASE  
PRE DRIVER  
CH2  
WO1  
VMVW1  
VO1  
4
5
6
7
39 WO2  
38 VMVW2  
37 VO2  
GNDUV1  
36 GNDUV2  
UO1  
8
35 UO2  
VMU1  
9
34 VMU2  
VG  
VC  
VC  
VG  
VMR1 10  
RO1 11  
PGND1 12  
33 VMR2  
32 RO2  
31 PGND2  
H-BRIDGE  
PRE DRIVER  
CH1  
H-BRIDGE  
PRE DRIVER  
CH2  
FO1 13  
30 FO2  
VMF1 14  
29 VMF2  
VC  
VG VC  
–
VG VC  
VG VC  
VC VG  
VC VG  
VC VG  
–
VC  
–
+
–
+
–
+
–
+
U
+
V
W
W
V
U
+
H-BRIDGE  
CONTROL  
CH1  
HI-BRIDGE  
CONTROL  
CH2  
15  
16  
17 18  
19  
20  
21  
22  
23  
24  
25 26  
27  
28  
IC871 R2061K01-E2  
12  
11  
10  
9
8
7
/INTR  
LEVEL  
SHIFTER  
SIO  
SCLK  
1
2
OSCOUT  
OSCIN  
REAL  
TIME  
CLOCK  
VOLTAGE  
REFERENCE  
/VDCC  
3
DELAY  
BATTERY  
VOLTAGE  
MONITOR  
VOLTAGE  
DETECTOR  
4
5
6
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
MZ-NH1  
IC891 AK6514CN-L  
20  
19  
18  
17  
16  
15 VCC  
CS  
1
14 HOLD  
STATUS  
REGISTER  
VPP  
GENERATOR  
VREF  
INSTRUCTION  
DECODE  
CONTROL  
&
SO  
NC  
2
3
4
5
VPP SW  
13 NC  
CLOCK  
GENERATION  
ADD  
WP  
DECODER  
BUFFERS  
GND  
EEPROM  
128K bit  
16384 × 8  
R/W AMPS  
&
AUTO ERASE  
INSTRUCTION  
REGISTER  
DATA  
REGISTER  
12 SCK  
11 SI  
6
7
8
9
10  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
MZ-NH1  
IC901 SC901584EPR2  
48  
47  
46  
45  
44 43  
42  
41 40  
39 38 37 36 35  
34  
33  
RESET 2  
SERIAL  
PASS  
REGULATOR 3  
RST2  
VC2  
POWER  
SWITCH 2  
STEP  
UP-DOWN  
DRIVER  
VC2  
REGC2 49  
RST2  
MUTING  
BUFFER  
REG2G 50  
REGO2 51  
REF2  
VREF  
SERIAL  
PASS  
PWM  
REGULATOR 2  
REGI2 52  
REGC1 53  
32 DTC2  
VREF  
RST1  
SERIAL  
PASS  
REGULATOR 1  
REF2  
REGO1 54  
REGI1 55  
31 RF2  
RST2  
30 INM2  
29 VGSEL1  
28 VGSEL2  
VB  
27 VB  
VG SELECT, VG DUTY  
VREF0  
26 PGND3  
VC  
GND 56  
VREF 57  
25 LG  
24 VG  
BANDGAP  
STEP UP  
START UP  
VC  
REFERENCE  
DC/DC CONVERTER  
CLK  
23 C1L  
22 INM1  
21 RF1  
REF1  
VREF0  
VREF  
REF DAC  
20 DTC1  
RST1  
RST1  
LVB  
DATA 58  
STRB 59  
CLK 60  
WDT 61  
SEQSEL 62  
CLK 63  
DRIVER  
19 XRST1ADJ  
18 CRST1  
PWM  
STEP  
UP-DOWN  
DRIVER  
REF1  
VC  
VC  
CONTROL  
VREF  
RESET 1  
17 XRST1  
VREF  
RST2  
SLEEP 64  
POWER  
SWITCH 1  
VC  
10  
1
2
3
4
5
6
7
8
9
11  
12 13 14 15 16  
IC902 XC62HR5502MR  
NC  
VIN  
1
2
VOUT  
5
CURRENT  
LIMIT  
+
–
OUTPUT  
CONTROL  
REFERENCE  
VOLTAGE  
CE  
3
VSS  
4
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
MZ-NH1  
• IC Pin Function Description  
IC801 CXD2681-222GG (SYSTEM CONTROLLER, DIGITAL SIGNAL PROCESSOR)  
Pin No.  
1
Pin Name  
DVDD1_0  
DVSS1_0  
DVDD1_1  
DVSS1_1  
DVDD1_2  
DVSS1_2  
DVDD1_3  
DVSS1_3  
DVDD1_4  
DVSS1_4  
DVDD1_5  
DVSS1_5  
DVDD1_6  
DVSS1_6  
DVDD1_7  
DVSS1_7  
DVDD1_8  
DVSS1_8  
DVDD1_9  
DVSS1_9  
DVDD3  
I/O  
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Description  
Power supply terminal  
2
Ground terminal  
3
Power supply terminal  
4
Ground terminal  
5
Power supply terminal  
6
Ground terminal  
7
Power supply terminal  
8
Ground terminal  
9
Power supply terminal  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
Ground terminal  
Power supply terminal  
Ground terminal  
Power supply terminal  
Ground terminal  
Power supply terminal  
Ground terminal  
Power supply terminal  
Ground terminal  
Power supply terminal  
Ground terminal  
Power supply terminal  
VSS_3  
Ground terminal  
DVDD1_10  
DVSS1_10  
DVDD1_11  
DVSS1_11  
AVDD1A  
AVSS1A  
AVDD1B  
AVSS1B  
AVDD1C  
AVDD2  
Power supply terminal  
Ground terminal  
Power supply terminal  
Ground terminal  
Power supply terminal (for PLL)  
Ground terminal (for PLL)  
Power supply terminal  
Ground terminal  
Power supply terminal  
Power supply terminal (for A/D converter)  
Power supply terminal (for A/D converter)  
Ground terminal (for A/D converter)  
Power supply terminal (for A/D converter)  
Ground terminal (for A/D converter)  
Power supply terminal (for PLL)  
Ground terminal (for PLL)  
Power supply terminal (for PLL)  
Ground terminal (for PLL)  
Power supply terminal (for D/A converter)  
Ground terminal (for D/A converter)  
Power supply terminal (for PLL)  
Ground terminal (for PLL)  
Power supply terminal (for A/D converter)  
Ground terminal (for A/D converter)  
DVDD25SVADC  
AVSS2  
AVDD3  
AVSS3  
AVDD4A  
AVSS4A  
AVDD4B  
AVSS4B  
AVDD4C  
AVSS4C  
AVDD5  
AVSS5  
AVDD6  
AVSS6  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
Pin No.  
47  
Pin Name  
DAVDD  
I/O  
—
—
—
—
—
—
—
—
—
—
Description  
Power supply terminal (for D/A converter)  
Power supply terminal (for D/A converter)  
Ground terminal (for D/A converter)  
48  
DVDD25LPF  
DAVSS  
49  
50  
OSCVDD  
Power supply terminal (for 22 MHz OSC)  
51  
USBOSCVDD  
TSMVDD  
Power supply terminal (for the USB 48 MHz OSC)  
Power supply terminal (for the TSB master communication)  
Power supply terminal (for MA interface)  
Power supply terminal (for AUX)  
52  
53  
MAIFVDD  
MSJTAGVDD  
USBIFVDD  
VSS_0 to VSS_2  
54  
55  
Power supply terminal (for USB interface)  
Ground terminal  
56 to 58  
IFVDD_1 to  
IFVDD_4  
59 to 62  
—
Power supply terminal (for interface)  
63  
64  
IFVSS_1  
IFVSS_2  
—
—
Ground terminal (for interface)  
Ground terminal (for interface)  
DRAMVDD0 to  
DRAMVDD4  
65 to 69  
70 to 72  
—
—
Power supply terminal (for D-RAM/DSP interface)  
Ground terminal (for D-RAM/DSP interface)  
DRAMVSS0 to  
DRAMVSS2  
73  
74  
75  
76  
77  
78  
79  
80  
81  
82  
83  
84  
85  
86  
87  
88  
89  
90  
91  
92  
93  
94  
95  
96  
97  
98  
99  
100  
101  
FCRAMVDD0  
FCRAMVSS0  
FCRAMVDD1  
FCRAMVSS1  
FVDD0  
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
O
Power supply terminal (for D-RAM)  
Ground terminal (for D-RAM)  
Power supply terminal (for D-RAM)  
Ground terminal (for D-RAM)  
Power supply terminal (for AUX)  
FVSS0  
Ground terminal (for AUX)  
SRAMVDD0  
SRAMVSS0  
SRAMVDD1  
SRAMVSS1  
EBIFVDD0  
EBIFVSS0  
EBIFVDD1  
EBIFVSS1  
EBIFVDD2  
EBIFVSS2  
EBIFVDD3  
EBIFVSS3  
EBIFVDD4  
EBIFVSS4  
EBIFVDD5  
EBIFVSS5  
EBIFVDD6  
EBIFVSS6  
EBIFVDD7  
EBIFVSS7  
ASYO  
Power supply terminal (for AUX)  
Ground terminal (for AUX)  
Power supply terminal (for AUX)  
Ground terminal (for AUX)  
Power supply terminal (for interface circuit)  
Ground terminal (for interface circuit)  
Power supply terminal (for interface circuit)  
Ground terminal (for interface circuit)  
Power supply terminal (for interface circuit)  
Ground terminal (for interface circuit)  
Power supply terminal (for interface circuit)  
Ground terminal (for interface circuit)  
Power supply terminal (for interface circuit)  
Ground terminal (for interface circuit)  
Power supply terminal (for interface circuit)  
Ground terminal (for interface circuit)  
Power supply terminal (for interface circuit)  
Ground terminal (for interface circuit)  
Power supply terminal (for interface circuit)  
Ground terminal (for interface circuit)  
Playback EFM duplex signal output  
Playback EFM comparator slice level input  
Playback EFM RF signal input from the RF amplifier  
ASYI  
I
RFI  
I
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
Pin No.  
102  
103  
104  
105  
106  
107  
108  
109  
110  
111  
112  
113  
114  
115  
116  
117  
118  
119  
120  
121  
122  
123  
124  
125  
126  
127  
128  
129  
Pin Name  
PCO  
I/O  
O
I
Description  
Phase comparison output terminal for the playback EFM system master PLL  
Filter input terminal for the playback EFM system master PLL  
Filter output terminal for the playback EFM system master PLL  
Internal VCO control voltage input terminal for the playback EFM system master PLL  
Peak hold signal input of the light amount signal (RF/ABCD) the RF amplifier  
Bottom hold signal input of the light amount signal (RF/ABCD) the RF amplifier  
Light amount signal (ABCD) input from the RF amplifier  
Focus error signal input from the RF amplifier  
FILI  
FILO  
O
I
CLTV  
PEAK  
I
BOTM  
I
ABCD  
I
FE  
I
VC  
I
Middle point voltage input from the RF amplifier  
Monitor output terminal of A/D converter input signal Not used  
A/D converter the lower limit voltage input terminal  
Sled error signal input from the RF amplifier  
ADIO  
O
I
ADRB  
SE  
I
TE  
I
Tracking error signal input from the RF amplifier  
Auxiliary A/D input terminal  
AUX1  
I
ADRT  
I
The upper limit voltage of A/D converter input terminal Not used  
Connecting terminal with the analog power supply of low impedance  
Error signal input for the laser automatic power control  
Connection terminal for an external capacitor  
DCHG  
—
I
APC  
ADC1EXTC  
D_VREGO  
VB_MON  
CHG_MON  
VREF_MON  
SET_KEY_1  
SET_KEY_2  
DCIN_DET  
HIDC_MON  
WK_DET  
VBUS_MON  
—
I
Voltage sensibility of regulator from the headphone amplifier  
Unregulated power supply voltage monitoring terminal  
Charge or discharge current monitoring terminal  
I
I
I
Reference voltage input terminal  
I
Front panel key input terminal  
I
Front panel key input terminal  
I
DC input voltage for battery charge monitoring terminal  
High DC voltage monitoring terminal  
I
I
Panel key input for wake-up  
I
USB power supply voltage monitoring terminal  
BATT_MINUS  
_MON  
130  
I
Voltage monitoring terminal for the minus terminal of rechargeable battery  
131  
132  
RMC_KEY  
RST_CONT  
I
Remote commander key input terminal  
O
System reset signal output to the power control IC  
REC_KEY  
/DOWNLOAD  
133  
134  
135  
I
I
I
REC key input terminal  
RADIO_ON  
Radio on detection input from the remote commander jack Not used  
Front panel open switch detection terminal  
HALF_LOCK_  
SW /OPEN_SW  
136  
137  
138  
139  
140  
141  
142  
143  
144  
145  
XRST  
I
I
System reset signal input from the power control IC  
Connection terminal for an external capacitor  
Connection terminal for an external capacitor  
Connection terminal for an external capacitor  
Connection terminal for an external capacitor  
Reference voltage input terminal  
PLL2EXTCI  
PLL2EXTCO  
PLL3EXTCI  
PLL3EXTCO  
DACVREFH  
APCREF_DA  
ADC3VREFH  
ADC3EXTC  
VIN  
O
I
O
I
O
I
Reference voltage output terminal  
Reference voltage input terminal  
—
I
Connection terminal for an external capacitor  
RF signal input from the RF amplifier  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
Pin No.  
146  
147  
148  
149  
150  
151  
152  
153  
154  
155  
156  
157  
158  
159  
160  
161  
162  
163  
164  
165  
166  
167  
168  
169  
170  
171  
172  
173  
174  
175  
176 to 179  
180  
181  
182  
183  
184  
185  
186  
187  
Pin Name  
VREFL  
AOUTL  
AOUTR  
VREFR  
DCLSOUTR  
DCLSOUTL  
RTCK  
I/O  
I
Description  
Reference voltage terminal connected to the capacitor (for the built-in D/A converter L-CH)  
Built-in D/A converter L-CH signal output  
O
O
I
Built-in D/A converter R-CH signal output  
Reference voltage terminal connected to the capacitor (for the built-in D/A converter R-CH)  
PWM modulator signal output to the headphone amplifier (R-CH)  
PWM modulator signal output to the headphone amplifier (L-CH)  
Not used  
O
O
—
I
ADFG  
ADIP duplex FM signal (22.05±1kHz) input from the RF amplifier  
Tracking servo drive PWM signal output (–) to the coil driver  
Tracking servo drive PWM signal output (+) to the coil driver  
Focus servo drive PWM signal output (+) to the coil driver  
Focus servo drive PWM signal output (–) to the coil driver  
176.4 kHz clock signal output  
TRDR  
O
O
O
O
O
O
O
O
O
O
I
TFDR  
FFDR  
FRDR  
FS4  
SFDR  
Sled servo drive PWM signal output to the motor driver  
Spindle motor drive control signal output (U) to the motor driver  
Spindle servo drive PWM signal output to the motor driver  
Spindle motor drive control signal output (V) to the motor driver  
Spindle motor drive control signal output (W) to the motor driver  
Spindle motor drive comparison signal input (U) from the motor driver  
Spindle motor drive comparison signal input (V) from the motor driver  
Spindle motor drive comparison signal input (W) from the motor driver  
Sled motor drive control signal output (V) to the motor driver  
Sled motor drive control signal output (W) to the motor driver  
Sled motor drive comparison signal input (U) from the motor driver  
Sled motor drive comparison signal input (V) from the motor driver  
Sled motor drive comparison signal input (W) from the motor driver  
Sled motor drive control signal output (U) to the motor driver  
Digital audio signal input terminal  
SPRD  
SPFD  
SPDV  
SPDW  
SPCU  
SPCV  
I
SPCW  
I
SLDV  
O
O
I
SLDW  
SLCU  
SLCV  
I
SLCW  
I
SRDR  
O
I
DIN  
FS256_OUT  
CHOPPERCLK  
MNT0 to MNT3  
OFTRK  
RECP  
O
O
O
11.2896 MHz clock output  
Clock signal output for chopper  
Monitor output for DSP  
I/O Tracking signal input/output for MD3  
O
O
I
Laser power changeover signal output  
EFMO  
EFM encode data output for the record  
PAUSE_KEY  
PROTECT  
OPT_DET  
XJACK_DET  
XMIC_DET  
Pause key input terminal  
I
Recording protector detection input for normal disc  
Optical digital input plug detection input terminal “H”: optical in  
Line input plug detection input terminal “L”: plug in  
Microphone input plug detection input terminal “L”: plug in  
I
I
I
OPEN_CLOSE  
_SW  
188  
I
Open switch input terminal  
189  
190  
191  
192  
193  
XCS_ADC  
XPD_ADC  
NC  
O
O
Chip select signal output for A/D converter  
Power control signal output for A/D converter  
Not used  
—
O
XRST_LCD  
USB_WAKE  
Reset signal output for the LCD module  
System wake up signal output by USB connect  
O
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
Pin No.  
194  
Pin Name  
A7CAL_SW  
SI0  
I/O  
O
I
Description  
A7 offset voltage CAL on/off control signal output terminal  
Serial data input from the EEPROM and real time clock IC  
Serial data output to the EEPROM, real time clock IC, A/D converter and power controller  
Serial clock output to the EEPROM, real time clock IC, A/D converter and power controller  
Rechargeable battery detection switch input terminal  
195  
196  
SO0  
O
O
I
197  
SCK0  
198  
XGUM_ON  
BEEP  
199  
O
O
I
Beep sound control signal output to the headphone amplifier  
Power supply on/off control signal output for the optical input jack  
LAM power check terminal Not used  
200  
XOPT_CTL  
201  
202  
LAM_REQCHK  
LAM_SPREQ  
O
LAM force stop request signal output Not used  
REC_LED  
/ACCESS_LED  
203  
O
REC LED drive signal output terminal  
204  
205  
206  
207  
208  
209  
210  
211  
MDVCC_CTL  
VBUS_VB_CTL  
LAM_NAME  
DRAM_ALONE  
XRST_CHG_IC  
PD_S0  
O
O
O
O
O
O
O
O
Power supply control signal output for the OP modulation  
USB power supply control signal output terminal Not used  
LAM name data request signal output terminal Not used  
Self-refresh signal output for internal D-RAM  
Reset signal output to the charge controller  
Connect to the optical pick-up block  
PD_S1  
Connect to the optical pick-up block  
D_ENREG  
Enable signal output to the headphone amplifier  
XMUTE  
/MUTE  
212  
O
Muting on/off control signal output terminal  
213  
214  
215  
216  
217  
218  
219  
SI1  
SO1  
I
Serial data input from the LCD module  
Serial data output to the LCD module  
O
SCK1  
I/O Serial data transfer clock signal input/output terminal with the LCD module  
SLD_MON  
AOUT_SEL  
SLEEP  
I
Sled servo monitoring terminal  
O
O
O
Headphone/line output switching terminal Not used  
Chip enable output to the power control IC  
FFCLR  
Power on/off control signal output for FCRAM (internal RAM)  
Charge current limiter control signal output at the time of AC adaptor use  
“L”: limit off, “H”: limit on  
220  
CHGI_CTL1  
O
221  
222  
223  
224  
225  
226  
227  
228  
229  
230  
231  
232  
233  
234  
235  
236  
237  
CHGI_CTL2  
CHGI_CTL3  
SLBUSY  
O
O
I
Charge current control signal output terminal “L”: low current charge  
Charge current control signal output terminal “L”: low current charge  
Receive signal monitoring terminal for sled command  
Terminal for the test mode setting (normally open) “L”: test mode  
Reset signal output to the RF amplifier  
XTEST  
I
XRF_RST  
VREC_SEL  
XHOLD_SW  
T_MARK_SW  
XRST2_DET  
CHGI_SEL  
RECP_MON  
SPDL_MON  
XCS_PWR_IC  
RXD  
O
O
I
VREC start-up timing control signal output terminal Not used  
HOLD switch input terminal  
I
Track mark switch input terminal Not used  
Reset signal input from the power control IC  
Charge/discharge control signal output for current sense amplifier  
Laser power changeover signal monitoring terminal  
Spindle servo monitoring terminal  
I
O
I
I
O
I
Chip select signal output to the power control IC  
Not used  
TXD  
O
O
O
Not used  
XCS_LCD  
N1_VI_CTL  
Chip select signal output to the LCD module  
Constant current circuit control signal output terminal  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
Pin No.  
Pin Name  
I/O  
Description  
XRST_MTR  
_DRV  
238  
O
Reset signal output to the motor driver  
Chip select signal output to the EEPROM  
239  
240  
241  
242  
XCS_NV  
CHG_PWM  
IAMP_CAL  
NC  
O
O
Charge current or voltage control signal output terminal  
Offset signal output of current sense amplifier  
Not used  
O
—
D_VCONT  
_PWM  
243  
O
For voltage control signal output to the headphone amplifier  
CHG_OPR_LED  
XCS_REC_DRV  
GND_SW  
CS_RTC  
244  
245  
246  
247  
248  
249  
250  
251  
252  
O
O
O
O
I
Charge indication LED drive signal output terminal  
Chip select signal output to the over write head driver  
Ground line switching signal output terminal Not used  
Chip select signal output for real time clock  
Jog dial pulse input terminal Not used  
JOG_A  
JOG_B  
I
Jog dial pulse input terminal Not used  
VBUS_DET  
SSB_DATA  
SSB_CLK  
I
USB power supply voltage detection terminal  
I/O SSB data input/output with the RF amplifier  
O
SSB clock output to the RF amplifier  
HIMD_  
PROTECT  
253  
I
Recording protector detection input for Hi-MD disc  
254  
255  
LDPEN  
O
O
Pulse/DC light-emit switching signal output terminal  
CHG_TYPE2  
Battery charge control signal output terminal “H”: charging Not used  
DRAM_HOLD  
_DET  
256  
257  
I
Detection terminal for internal D-RAM power supply information keeping  
Internal D-RAM power latch clear signal output for quick mode sleep  
DRAM_VDD  
_CLR  
O
258  
259  
260  
261  
AD2ENDF  
TEST  
I
—
I
Monitoring terminal for flag of servo signal A/D measuring finish  
Not used  
Not used  
Not used  
SRAM_MODE  
HSALF  
I
262 to  
271  
TIGER_MON0 to  
TIGER_MON9  
O
Trigger monitoring terminal output clock=18.5 MHz  
272  
273  
274  
275  
276  
277  
278  
279  
280  
281  
282  
283  
284  
285  
286  
287  
XLSRCK  
TAT  
O
—
—
—
—
—
I
Pulse output for laser strobe recording  
Not used  
TAN  
Not used  
NAR  
IDO  
Not used  
Not used  
SAK  
Not used  
LRCKI  
XBCKI  
DATAI  
SI3  
L/R sampling clock signal input terminal for PCM data interface Not used  
Bit clock signal input terminal for the PCM data interface Not used  
Serial clock signal input terminal for the PCM data interface Not used  
Serial data input for LAM microcomputer communication Not used  
Serial data output for LAM microcomputer communication Not used  
I
I
I
SO3  
O
O
I
SCK3  
SI4  
Serial data transfer clock signal output for LAM microcomputer communication Not used  
Data input from ATRAC3 plus encoder communication Not used  
SO4  
O
O
O
Data output for ATRAC3 plus encoder communication Not used  
SCK4  
SCS3  
Clock signal output for ATRAC3 plus encoder communication Not used  
Chip select signal output for LAM microcomputer communication Not used  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
Pin No.  
288  
Pin Name  
SCS4  
I/O  
O
Description  
Chip select signal output for ATRAC3 plus encoder communication Not used  
Standby signal output terminal for the sled motor  
289  
HI_Z_SLD  
HI_Z_SPDL  
O
290  
O
Standby signal output terminal for the spindle motor  
291 to SET_CODE0 to  
294 SET_CODE3  
I
Setting terminal for the destination  
295, 296 D_EN1, D_EN2  
O
O
O
O
O
—
—
—
I
Headphone/LINE/beep switching signal output to the headphone amplifier  
Power on/off control signal output for headphone amplifier  
Audio data output terminal Not used  
297  
298  
D_ENVG  
DADT  
PWM_L1  
PWM_L2  
I2C_1  
299  
LC drive PWM output terminal  
300  
LC drive PWM output terminal  
301  
Open drain for IIC  
302  
I2C_2  
Open drain for IIC  
303, 304  
305  
TEST  
Not used  
CLKIN2  
FS256  
Clock signal input terminal (13.5 MHz or 27 MHz) Not used  
Master clock signal (256Fs=11.2896 MHz) output to A/D converter  
Data input from A/D converter  
306  
O
I
307  
ADDT  
LRCK  
308  
O
O
I
L/R sampling clock signal (44.1kHz) output to external A/D converter  
Bit clock (2.8224 MHz) output to the external A/D converter  
Main system clock input terminal (22.5792 MHz)  
Main system clock output terminal (22.5792 MHz)  
Clock signal output to the headphone amplifier  
309  
XBCK  
OSCI  
310  
311  
OSCO  
O
O
312  
FS512  
313  
DTCK  
UDP  
I/O TSB master data clock input/output or SSB data input/output  
I/O USB data (+) input/output terminal  
314  
315  
UDM  
I/O USB data (–) input/output terminal  
316  
USBHOLD  
SUSPEND  
UPUEN  
UOSCI  
UOSCO  
NC  
I
O
O
I
USB hold signal input terminal  
317  
USB suspend signal output  
318  
USB pull-up resistor connection control output terminal  
Resonator (48MHz) connection terminal for the USB oscillation circuit  
Resonator (48MHz) connection terminal for the USB oscillation circuit  
Not used  
319  
320  
O
—
321 to 325  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
SECTION 7  
EXPLODED VIEWS  
NOTE:  
•
-XX and -X mean standardized parts, so they  
may have some difference from the original  
one.  
Color Indication of Appearance Parts  
Example:  
KNOB, BALANCE (WHITE) . . . (RED)  
•
Items marked “*” are not stocked since they  
are seldom required for routine service. Some  
delay should be anticipated when ordering  
these items.  
The mechanical parts with no reference  
number in the exploded views are not supplied.  
Accessories are given in the last of the  
electrical parts list.  
The components identified by mark  
0or dotted line with mark 0are  
critical for safety.  
Replace only with part number  
specified.  
•
•
•
↑
↑
Parts Color Cabinet's Color  
•
Abbreviation  
•
Color Variation  
Silver : All models  
JE : Tourist model  
KR : Korea model  
CH : Chinese model  
E18 : 100 V - 240 V AC Area in E model  
HK : Hong Kong model  
Gold : HK, KR, CH, E18, JE models  
7-1. PANEL SECTION  
16  
8
7
6
not supplied  
3
3
17  
not  
supplied  
12  
9
13  
10  
15  
14  
5
11  
4
3
3
2
main section  
1
Ref. No.  
Part No.  
Description  
Remark  
Ref. No.  
Part No.  
Description  
Remark  
1
1
2
3
4
3-264-157-01 KNOB (HOLD) (SILVER)  
3-264-157-31 KNOB (HOLD) (GOLD)  
3-264-158-01 KNOB (OPEN)  
3-225-873-09 SCREW (M1.4)  
X-2023-574-1 PANEL (S-CE) SUB ASSY, BOTTOM (SILVER)  
(AEP, UK)  
7
8
8
9
3-264-154-11 BADGE (HI-MD)  
X-2021-801-1 PANEL (S) SUB ASSY, UPPER (SILVER)  
X-2021-802-1 PANEL (N) SUB ASSY, UPPER (GOLD)  
3-225-873-29 SCREW (M1.4)  
10  
1-805-493-11 LCD MODULE  
11  
12  
13  
14  
15  
3-254-003-01 SCREW  
4
4
X-2023-575-1 PANEL (S-NONCE)SUB ASSY,BOTTOM (SILVER)  
(EXCEPT AEP, UK)  
X-2023-576-1 PANEL (N-NONCE)SUB ASSY,BOTTOM (GOLD)  
(HK, KR, CH, E18, JE)  
3-264-153-01 SPRING (REC), COMPRESSION  
2-189-608-01 SHEET (LCD MODULE), INSULATING  
2-186-565-01 SHEET (EMC LOWER B), ADHESIVE  
2-177-997-01 SHEET (EMC LOWER)  
5
5
6
3-264-156-01 ESCUTCHEON (CONNECTOR) (SILVER)  
3-264-156-41 ESCUTCHEON (CONNECTOR) (GOLD)  
2-050-812-02 SHEET (LOWER PANEL)  
16  
17  
2-024-015-01 SPACER (HP)  
2-067-920-01 SPACER (COIL)  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
7-2. MAIN SECTION  
62  
mechanism deck section  
56  
60  
59  
64  
63  
55  
54  
53  
70  
not  
supplied  
65  
82  
69  
81  
77  
84  
57  
83  
79  
76  
78  
58  
85  
80  
61  
75  
72  
51  
71  
MAIN board  
68  
74  
67  
73  
88  
87  
51  
52  
86  
Ref. No.  
Part No.  
3-238-876-07 SCREW (M1.4), TOOTHED LOCK  
X-2023-571-1 MAIN BOARD, COMPLETE (for SERVICE)  
(E18, JE)  
X-2024-720-1 MAIN BOARD, COMPLETE (for SERVICE) (US)  
X-2024-721-1 MAIN BOARD, COMPLETE (for SERVICE)  
(EXCEPT US, E18, JE)  
Description  
Remark  
Ref. No.  
Part No.  
Description  
Remark  
51  
52  
69  
70  
71  
72  
73  
2-190-061-01 SPACER (MIC-LINE)  
2-178-887-01 SPACER (HEAD FLEXIBLE)  
X-2024-190-1 ORNAMENT SUB ASSY, CONTROL  
2-176-415-01 SPRING (EMC) (2), LEAF  
2-176-392-01 SPACER (RECEPTACLE)  
52  
52  
53  
3-264-138-01 TERMINAL, BATTERY  
74  
75  
76  
77  
78  
2-176-414-01 SPRING (EMC) (1), LEAF  
2-067-920-01 SPACER (COIL)  
2-024-013-01 SPACER (LINE IN)  
2-024-015-01 SPACER (HP)  
54  
55  
56  
57  
58  
3-264-137-01 HOLDER, TERMINAL  
3-264-139-01 SPRING (BATT)  
3-264-140-01 CASE, BATTERY  
3-264-131-01 SPRING (OPEN)  
3-264-132-01 SPRING (LIMITER)  
2-108-116-01 COVER (RECEPTACLE)  
79  
80  
81  
82  
83  
2-024-014-01 SPACER (MIC)  
3-266-842-01 SPACER (SLED MOTOR)  
2-067-464-01 SPACER (MIC) 2  
2-190-444-01 SPACER (HP) 2  
59  
60  
61  
62  
63  
X-3384-755-2 CHASSIS ASSY, SET  
3-264-136-01 SPRING (POP-L)  
3-264-135-01 SPRING (POP-R)  
3-246-996-01 SCREW (MD), STEP  
3-254-003-01 SCREW  
3-264-143-01 CONTROL, BUTTON (SIDE)  
84  
85  
86  
87  
88  
2-178-130-01 SHEET (SHEILD C)  
2-178-129-01 SHEET (SHEILD B)  
2-178-128-01 SHEET (SHEILD A)  
2-159-395-01 SPACER (IC)  
64  
65  
67  
68  
1-478-469-11 SWITCH UNIT  
3-264-144-01 BUTTON CONTROL (5 DIRECTION) (B ENT)  
3-264-161-01 LID, BATTERY CASE  
3-234-449-25 SCREW (M1.4)  
2-178-259-01 SHEET (LEAF SPRING), INSULATING  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
7-3. MECHANISM DECK SECTION  
159  
not supplied  
164  
163  
158  
(including HR601  
(over write head) )  
161  
not supplied HR601  
(over write head)  
157  
154  
M702  
160  
162  
156  
M703  
154  
M701  
153  
155  
153  
152  
151  
153  
The components identified by mark 0or dotted  
line with mark 0are critical for safety.  
Replace only with part number specified.  
Ref. No.  
Part No.  
Description  
Remark  
Ref. No.  
Part No.  
Description  
Remark  
151  
152  
153  
154  
155  
3-338-645-31 WASHER (0.8-2.5)  
3-244-882-02 GEAR (SA)  
3-248-370-01 SCREW, SELF TAP  
3-225-996-17 SCREW (M1.4) (EG), PRECISION PAN  
3-244-880-01 SPRING, THRUST RETAINER  
161  
162  
0163  
X-2023-012-1 SCREW SERVICE ASSY, LEAD  
3-244-879-01 SPRING, RACK  
X-2021-779-1 SERVICE ASSY, OP (ABX-U)  
(including HR601 (OVER WRITE HEAD))  
3-259-981-01 SPRING (EJECT), TENSION  
164  
M701  
8-835-782-02 MOTOR, DC SSM18D/C-NP (SPINDLE)  
156  
157  
158  
159  
160  
3-244-883-02 GEAR (SB)  
3-259-972-12 CHASSIS (REC)  
X-3382-398-3 BASE ASSY, MOTOR  
X-3384-181-2 HOLDER ASSY  
3-245-021-03 PLATE, RATCHET  
M702  
M703  
8-835-778-11 MOTOR, DC SSM21A/C-NP (SLED)  
1-477-519-21 MOTOR UNIT, DC  
(OVER WRITE HEAD UP/DOWN)  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
SECTION 8  
ELECTRICAL PARTS LIST  
MAIN  
NOTE:  
The components identified by mark  
0 or dotted line with mark 0 are  
critical for safety.  
Replace only with part number  
specified.  
•
Due to standardization, replacements in the  
parts list may be different from the parts  
specified in the diagrams or the components  
used on the set.  
-XX and -X mean standardized parts, so they  
may have some difference from the original  
one.  
RESISTORS  
All resistors are in ohms.  
METAL: Metal-film resistor.  
METAL OXIDE: Metal oxide-film resistor.  
F: nonflammable  
•
Items marked “*” are not stocked since they  
are seldom required for routine service.  
Some delay should be anticipated when  
ordering these items.  
SEMICONDUCTORS  
In each case, u: µ, for example:  
•
•
•
uA... : µA...  
uPB... : µPB...  
uPD... : µPD...  
CAPACITORS  
uF: µF  
uPA... : µPA...  
uPC... : µPC...  
When indicating parts by reference  
number, please include the board.  
•
•
COILS  
uH: µH  
•
Abbreviation  
CH : Chinese model  
E18 : 100 V - 240 V AC Area in E model  
HK : Hong Kong model  
JE : Tourist model  
KR : Korea model  
Ref. No.  
Part No.  
Description  
Remark  
Ref. No.  
Part No.  
Description  
Remark  
X-2023-571-1 MAIN BOARD, COMPLETE (for SERVICE)  
(E18, JE)  
X-2024-720-1 MAIN BOARD, COMPLETE (for SERVICE) (US)  
X-2024-721-1 MAIN BOARD, COMPLETE (for SERVICE)  
(EXCEPT US, E18, JE)  
C253  
C254  
C255  
C302  
1-127-715-11 CERAMIC CHIP 0.22uF  
1-135-868-11 TANTALUM CHIP 220uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
10%  
20%  
10%  
16V  
2.5V  
10V  
50V  
1-164-939-11 CERAMIC CHIP 0.0022uF 10%  
*********************  
C303  
C304  
C305  
C306  
C307  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-164-874-11 CERAMIC CHIP 100PF  
1-164-874-11 CERAMIC CHIP 100PF  
1-164-939-11 CERAMIC CHIP 0.0022uF 10%  
1-164-937-11 CERAMIC CHIP 0.001uF 10%  
10%  
5%  
5%  
10V  
50V  
50V  
50V  
50V  
2-024-013-01 SPACER (LINE IN)  
2-024-014-01 SPACER (MIC)  
2-024-015-01 SPACER (HP)  
2-067-464-01 SPACER (MIC) 2  
2-067-920-01 SPACER (COIL)  
C308  
C310  
C311  
C312  
C313  
1-164-937-11 CERAMIC CHIP 0.001uF 10%  
50V  
6.3V  
10V  
6.3V  
6.3V  
1-117-919-11 TANTALUM CHIP 10uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-100-842-11 TANTALUM CHIP 47uF  
1-100-842-11 TANTALUM CHIP 47uF  
20%  
10%  
20%  
20%  
2-108-116-01 COVER (RECEPTACLE)  
2-159-395-01 SPACER (IC)  
2-176-392-01 SPACER (RECEPTACLE)  
2-190-061-01 SPACER (MIC-LINE)  
2-178-128-01 SHEET (SHIELD A)  
C314  
C315  
C316  
C318  
C319  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-117-919-11 TANTALUM CHIP 10uF  
1-100-453-11 TANTALUM CHIP 22uF  
1-100-840-11 TANTALUM CHIP 2.2uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
10%  
20%  
20%  
20%  
10%  
10V  
6.3V  
6.3V  
10V  
10V  
2-178-129-01 SHEET (SHIELD B)  
2-178-130-01 SHEET (SHIELD C)  
2-178-259-01 SHEET (LEAF SPRING), INSULATING  
2-190-444-01 SPACER (HP) 2  
3-266-842-01 SPACER (SLED MOTOR)  
C320  
C321  
C322  
C323  
C324  
1-100-840-11 TANTALUM CHIP 2.2uF  
1-100-842-11 TANTALUM CHIP 47uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-117-919-11 TANTALUM CHIP 10uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
20%  
20%  
10%  
20%  
10%  
10V  
6.3V  
10V  
6.3V  
10V  
< CAPACITOR >  
C101  
C102  
C104  
C105  
C106  
1-164-874-11 CERAMIC CHIP 100PF  
1-125-837-11 CERAMIC CHIP 1uF  
1-164-939-11 CERAMIC CHIP 0.0022uF 10%  
1-125-777-11 CERAMIC CHIP 0.1uF 10%  
1-164-937-11 CERAMIC CHIP 0.001uF 10%  
5%  
10%  
50V  
6.3V  
50V  
10V  
50V  
C325  
C327  
C328  
C351  
C352  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-837-11 CERAMIC CHIP 1uF  
1-125-837-11 CERAMIC CHIP 1uF  
1-125-891-11 CERAMIC CHIP 0.47uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
10%  
10%  
10%  
10%  
10%  
10V  
6.3V  
6.3V  
10V  
10V  
C107  
C108  
C151  
C152  
C153  
1-100-843-11 TANTALUM CHIP 47uF  
1-125-926-11 TANTALUM CHIP 4.7uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-164-937-11 CERAMIC CHIP 0.001uF 10%  
1-127-715-11 CERAMIC CHIP 0.22uF  
20%  
20%  
10%  
4V  
6.3V  
10V  
50V  
16V  
C353  
C354  
C355  
C356  
C357  
1-164-937-11 CERAMIC CHIP 0.001uF 10%  
50V  
1-165-884-11 CERAMIC CHIP 2.2uF  
1-112-011-21 TANTALUM CHIP 47uF  
1-100-842-11 TANTALUM CHIP 47uF  
1-100-842-11 TANTALUM CHIP 47uF  
10%  
20%  
20%  
20%  
6.3V  
6.3V  
6.3V  
6.3V  
10%  
C154  
C155  
C201  
C202  
C204  
1-135-868-11 TANTALUM CHIP 220uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-164-874-11 CERAMIC CHIP 100PF  
1-125-837-11 CERAMIC CHIP 1uF  
20%  
10%  
5%  
2.5V  
10V  
50V  
6.3V  
50V  
C358  
C359  
C360  
C361  
C362  
1-100-842-11 TANTALUM CHIP 47uF  
1-100-842-11 TANTALUM CHIP 47uF  
1-165-884-11 CERAMIC CHIP 2.2uF  
1-100-842-11 TANTALUM CHIP 47uF  
1-117-919-11 TANTALUM CHIP 10uF  
20%  
20%  
10%  
20%  
20%  
6.3V  
6.3V  
6.3V  
6.3V  
6.3V  
10%  
1-164-939-11 CERAMIC CHIP 0.0022uF 10%  
C205  
C206  
C207  
C208  
C251  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-164-937-11 CERAMIC CHIP 0.001uF 10%  
1-100-843-11 TANTALUM CHIP 47uF  
1-125-926-11 TANTALUM CHIP 4.7uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
10%  
10V  
50V  
4V  
6.3V  
10V  
20%  
20%  
10%  
C364  
C365  
C367  
C368  
C370  
1-165-884-11 CERAMIC CHIP 2.2uF  
1-125-837-11 CERAMIC CHIP 1uF  
1-125-837-11 CERAMIC CHIP 1uF  
1-127-715-11 CERAMIC CHIP 0.22uF  
1-100-352-11 CERAMIC CHIP 1uF  
10%  
10%  
10%  
10%  
20%  
6.3V  
6.3V  
6.3V  
16V  
16V  
C252  
1-164-937-11 CERAMIC CHIP 0.001uF 10%  
50V  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
MAIN  
Ref. No.  
Part No.  
Description  
Remark  
Ref. No.  
Part No.  
Description  
Remark  
C555  
C556  
C557  
C558  
C559  
1-164-941-11 CERAMIC CHIP 0.0047uF 10%  
16V  
6.3V  
10V  
50V  
16V  
C401  
C402  
C403  
C404  
C405  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-100-844-11 TANTALUM CHIP 22uF  
1-100-844-11 TANTALUM CHIP 22uF  
1-164-937-11 CERAMIC CHIP 0.001uF 10%  
1-125-777-11 CERAMIC CHIP 0.1uF  
10%  
20%  
20%  
10V  
10V  
10V  
50V  
10V  
1-125-926-11 TANTALUM CHIP 4.7uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
20%  
10%  
1-164-937-11 CERAMIC CHIP 0.001uF 10%  
1-164-941-11 CERAMIC CHIP 0.0047uF 10%  
10%  
C560  
C561  
C562  
C564  
C565  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-837-11 CERAMIC CHIP 1uF  
1-125-837-11 CERAMIC CHIP 1uF  
1-131-860-11 TANTALUM CHIP 4.7uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
10%  
10%  
10%  
20%  
10%  
10V  
6.3V  
6.3V  
10V  
10V  
C406  
C407  
C408  
C409  
C410  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-164-943-11 CERAMIC CHIP 0.01uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
10%  
10%  
10%  
10%  
10%  
10V  
10V  
10V  
16V  
10V  
C566  
C567  
C568  
C569  
C570  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-926-11 TANTALUM CHIP 4.7uF  
1-164-943-11 CERAMIC CHIP 0.01uF  
1-164-943-11 CERAMIC CHIP 0.01uF  
1-112-014-11 TANTALUM CHIP 4.7uF  
10%  
20%  
10%  
10%  
20%  
10V  
6.3V  
16V  
16V  
6.3V  
C412  
C415  
C431  
C432  
C433  
1-107-826-11 CERAMIC CHIP 0.1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-164-939-11 CERAMIC CHIP 0.0022uF 10%  
1-164-939-11 CERAMIC CHIP 0.0022uF 10%  
1-164-939-11 CERAMIC CHIP 0.0022uF 10%  
10%  
10%  
16V  
10V  
50V  
50V  
50V  
C573  
C574  
1-164-937-11 CERAMIC CHIP 0.001uF 10%  
1-164-935-11 CERAMIC CHIP 470PF 10%  
50V  
50V  
C434  
C452  
C453  
C454  
C455  
1-162-964-11 CERAMIC CHIP 0.001uF 10%  
1-164-939-11 CERAMIC CHIP 0.0022uF 10%  
1-164-939-11 CERAMIC CHIP 0.0022uF 10%  
50V  
50V  
50V  
50V  
50V  
(EXCEPT US, E18, JE)  
C574  
C575  
1-164-937-11 CERAMIC CHIP 0.001uF 10%  
50V  
(US, E18, JE)  
50V  
1-162-962-11 CERAMIC CHIP 470PF  
10%  
1-164-939-11 CERAMIC CHIP 0.0022uF 10%  
1-164-937-11 CERAMIC CHIP 0.001uF 10%  
(US, E18, JE)  
6.3V  
C456  
C457  
C460  
1-164-939-11 CERAMIC CHIP 0.0022uF 10%  
1-164-939-11 CERAMIC CHIP 0.0022uF 10%  
50V  
50V  
6.3V  
C601  
C602  
1-125-837-11 CERAMIC CHIP 1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
10%  
10%  
10V  
1-100-506-11 CERAMIC CHIP 1uF  
20%  
(E18, JE)  
50V  
(EXCEPT E18, JE)  
C604  
C611  
C612  
C613  
C614  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-164-943-11 CERAMIC CHIP 0.01uF  
1-100-453-11 TANTALUM CHIP 22uF  
1-100-453-11 TANTALUM CHIP 22uF  
1-100-453-11 TANTALUM CHIP 22uF  
10%  
10%  
20%  
20%  
20%  
10V  
16V  
6.3V  
6.3V  
6.3V  
C460  
C503  
1-164-935-11 CERAMIC CHIP 470PF  
10%  
1-164-937-11 CERAMIC CHIP 0.001uF 10%  
50V  
C511  
C513  
C515  
C516  
C517  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-164-943-11 CERAMIC CHIP 0.01uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
10%  
10%  
10%  
10%  
10%  
10V  
16V  
10V  
10V  
10V  
C615  
C616  
C617  
C619  
C620  
1-100-453-11 TANTALUM CHIP 22uF  
1-100-844-11 TANTALUM CHIP 22uF  
1-100-453-11 TANTALUM CHIP 22uF  
1-125-837-11 CERAMIC CHIP 1uF  
20%  
20%  
20%  
10%  
6.3V  
10V  
6.3V  
6.3V  
16V  
1-107-819-11 CERAMIC CHIP 0.022uF 10%  
C518  
C519  
C520  
C521  
C522  
1-125-926-11 TANTALUM CHIP 4.7uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-164-850-11 CERAMIC CHIP 10PF  
1-164-850-11 CERAMIC CHIP 10PF  
20%  
10%  
10%  
0.5PF 50V  
0.5PF 50V  
6.3V  
10V  
10V  
C621  
C622  
C624  
C625  
C626  
1-117-919-11 TANTALUM CHIP 10uF  
1-100-442-11 TANTALUM CHIP 10uF  
1-164-933-11 CERAMIC CHIP 220PF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-164-943-11 CERAMIC CHIP 0.01uF  
20%  
20%  
10%  
10%  
10%  
6.3V  
6.3V  
50V  
10V  
16V  
C523  
C524  
C525  
C526  
C527  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-162-970-11 CERAMIC CHIP 0.01uF  
1-164-941-11 CERAMIC CHIP 0.0047uF 10%  
1-164-874-11 CERAMIC CHIP 100PF  
1-125-777-11 CERAMIC CHIP 0.1uF  
10%  
10%  
10V  
25V  
16V  
50V  
10V  
C628  
C629  
C630  
C632  
C633  
1-125-837-11 CERAMIC CHIP 1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-100-842-11 TANTALUM CHIP 47uF  
1-164-943-11 CERAMIC CHIP 0.01uF  
10%  
10%  
10%  
20%  
10%  
6.3V  
10V  
10V  
6.3V  
16V  
5%  
10%  
C528  
C529  
C530  
C531  
C533  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-837-11 CERAMIC CHIP 1uF  
1-164-943-11 CERAMIC CHIP 0.01uF  
1-164-943-11 CERAMIC CHIP 0.01uF  
10%  
10%  
10%  
10%  
10%  
10V  
10V  
6.3V  
16V  
16V  
C634  
C635  
C636  
C637  
C638  
1-125-837-11 CERAMIC CHIP 1uF  
1-100-842-11 TANTALUM CHIP 47uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-117-919-11 TANTALUM CHIP 10uF  
10%  
20%  
10%  
20%  
6.3V  
6.3V  
10V  
6.3V  
50V  
1-164-937-11 CERAMIC CHIP 0.001uF 10%  
C536  
C537  
C538  
C539  
C545  
1-107-819-11 CERAMIC CHIP 0.022uF 10%  
1-125-837-11 CERAMIC CHIP 1uF 10%  
1-164-937-11 CERAMIC CHIP 0.001uF 10%  
16V  
6.3V  
50V  
6.3V  
10V  
C639  
C641  
C642  
C643  
C644  
1-107-826-11 CERAMIC CHIP 0.1uF  
1-164-943-11 CERAMIC CHIP 0.01uF  
1-107-819-11 CERAMIC CHIP 0.022uF 10%  
1-165-884-11 CERAMIC CHIP 2.2uF 10%  
1-164-941-11 CERAMIC CHIP 0.0047uF 10%  
10%  
10%  
16V  
16V  
16V  
6.3V  
16V  
1-125-837-11 CERAMIC CHIP 1uF  
10%  
1-125-777-11 CERAMIC CHIP 0.1uF  
10%  
C547  
C550  
C552  
C553  
C554  
1-119-923-11 CERAMIC CHIP 0.047uF 10%  
1-119-923-11 CERAMIC CHIP 0.047uF 10%  
10V  
10V  
16V  
6.3V  
10V  
C645  
C646  
C647  
C648  
C649  
1-164-943-11 CERAMIC CHIP 0.01uF  
10%  
16V  
10V  
16V  
10V  
10V  
1-164-943-11 CERAMIC CHIP 0.01uF  
1-125-926-11 TANTALUM CHIP 4.7uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
10%  
20%  
10%  
1-119-923-11 CERAMIC CHIP 0.047uF 10%  
1-165-176-11 CERAMIC CHIP 0.047uF 10%  
1-119-923-11 CERAMIC CHIP 0.047uF 10%  
1-125-777-11 CERAMIC CHIP 0.1uF  
10%  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
MAIN  
Ref. No.  
Part No.  
Description  
Remark  
Ref. No.  
Part No.  
Description  
Remark  
C847  
C849  
C851  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
10%  
10%  
10%  
10V  
10V  
10V  
C650  
C651  
C652  
C653  
C654  
1-100-442-11 TANTALUM CHIP 10uF  
1-100-353-11 CERAMIC CHIP 4.7uF  
1-104-851-11 TANTALUM CHIP 10uF  
1-104-851-11 TANTALUM CHIP 10uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
20%  
10%  
20%  
20%  
10%  
6.3V  
16V  
10V  
10V  
10V  
C852  
C855  
C856  
C861  
C871  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-100-842-11 TANTALUM CHIP 47uF  
1-164-858-11 CERAMIC CHIP 22PF  
1-125-777-11 CERAMIC CHIP 0.1uF  
10%  
10%  
20%  
5%  
10V  
10V  
6.3V  
50V  
10V  
C655  
C656  
C658  
C659  
C660  
1-125-837-11 CERAMIC CHIP 1uF  
1-125-837-11 CERAMIC CHIP 1uF  
1-100-844-11 TANTALUM CHIP 22uF  
1-100-353-11 CERAMIC CHIP 4.7uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
10%  
10%  
20%  
10%  
10%  
6.3V  
6.3V  
10V  
16V  
10V  
10%  
C873  
C874  
C877  
C878  
C879  
1-164-842-11 CERAMIC CHIP 2PF  
1-100-842-11 TANTALUM CHIP 47uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-100-352-11 CERAMIC CHIP 1uF  
0.25PF 50V  
20%  
10%  
10%  
20%  
6.3V  
10V  
10V  
16V  
C662  
C663  
C674  
C701  
C702  
1-164-943-11 CERAMIC CHIP 0.01uF  
1-164-937-11 CERAMIC CHIP 0.001uF 10%  
1-112-010-11 CAP-CHIP 33PF 5%  
1-107-819-11 CERAMIC CHIP 0.022uF 10%  
1-107-819-11 CERAMIC CHIP 0.022uF 10%  
10%  
16V  
50V  
100V  
16V  
16V  
C880  
C881  
C883  
C884  
C885  
1-100-352-11 CERAMIC CHIP 1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-837-11 CERAMIC CHIP 1uF  
1-164-943-11 CERAMIC CHIP 0.01uF  
1-125-837-11 CERAMIC CHIP 1uF  
20%  
10%  
10%  
10%  
10%  
16V  
10V  
6.3V  
16V  
6.3V  
C703  
C705  
C706  
C707  
C708  
1-107-819-11 CERAMIC CHIP 0.022uF 10%  
16V  
16V  
16V  
16V  
16V  
1-164-943-11 CERAMIC CHIP 0.01uF  
1-107-819-11 CERAMIC CHIP 0.022uF 10%  
1-164-943-11 CERAMIC CHIP 0.01uF 10%  
1-107-819-11 CERAMIC CHIP 0.022uF 10%  
10%  
C888  
C890  
C891  
C892  
C894  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-164-874-11 CERAMIC CHIP 100PF  
10%  
10%  
10%  
5%  
10V  
10V  
10V  
50V  
50V  
C709  
C710  
C712  
C713  
C714  
1-164-943-11 CERAMIC CHIP 0.01uF  
1-107-819-11 CERAMIC CHIP 0.022uF 10%  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-107-826-11 CERAMIC CHIP 0.1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
10%  
16V  
16V  
10V  
16V  
10V  
1-164-937-11 CERAMIC CHIP 0.001uF 10%  
10%  
10%  
10%  
(US, E18, JE)  
C901  
C902  
C903  
C905  
C906  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-164-937-11 CERAMIC CHIP 0.001uF 10%  
1-100-352-11 CERAMIC CHIP 1uF  
1-100-352-11 CERAMIC CHIP 1uF  
10%  
10%  
10V  
10V  
50V  
16V  
16V  
C715  
C716  
C717  
C801  
C802  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-164-850-11 CERAMIC CHIP 10PF  
1-164-850-11 CERAMIC CHIP 10PF  
10%  
10%  
10%  
0.5PF 50V  
0.5PF 50V  
10V  
10V  
10V  
20%  
20%  
C909  
C910  
C911  
C912  
C913  
1-100-845-11 TANTALUM CHIP 10uF  
1-100-845-11 TANTALUM CHIP 10uF  
1-100-845-11 TANTALUM CHIP 10uF  
1-100-845-11 TANTALUM CHIP 10uF  
1-100-845-11 TANTALUM CHIP 10uF  
20%  
20%  
20%  
20%  
20%  
16V  
16V  
16V  
16V  
16V  
C803  
C804  
C805  
C808  
C809  
1-164-943-11 CERAMIC CHIP 0.01uF  
1-164-943-11 CERAMIC CHIP 0.01uF  
1-125-891-11 CERAMIC CHIP 0.47uF  
1-125-837-11 CERAMIC CHIP 1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
10%  
10%  
10%  
10%  
10%  
16V  
16V  
10V  
6.3V  
10V  
C914  
C916  
C917  
C918  
C919  
1-100-442-11 TANTALUM CHIP 10uF  
1-100-442-11 TANTALUM CHIP 10uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-164-227-11 CERAMIC CHIP 0.022uF 10%  
1-164-227-11 CERAMIC CHIP 0.022uF 10%  
20%  
20%  
10%  
6.3V  
6.3V  
10V  
25V  
25V  
C810  
C811  
C812  
C813  
C814  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-837-11 CERAMIC CHIP 1uF  
1-119-923-11 CERAMIC CHIP 0.047uF 10%  
1-125-777-11 CERAMIC CHIP 0.1uF  
10%  
10%  
10%  
10V  
10V  
6.3V  
10V  
10V  
10%  
C920  
C922  
C924  
C925  
C926  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-100-453-11 TANTALUM CHIP 22uF  
1-100-842-11 TANTALUM CHIP 47uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
10%  
20%  
20%  
10%  
10V  
6.3V  
6.3V  
10V  
50V  
C816  
C817  
C818  
C819  
C820  
1-100-842-11 TANTALUM CHIP 47uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-100-842-11 TANTALUM CHIP 47uF  
1-100-842-11 TANTALUM CHIP 47uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
20%  
10%  
20%  
20%  
10%  
6.3V  
10V  
6.3V  
6.3V  
10V  
1-164-937-11 CERAMIC CHIP 0.001uF 10%  
C927  
C928  
C929  
C931  
C932  
1-164-874-11 CERAMIC CHIP 100PF  
1-164-874-11 CERAMIC CHIP 100PF  
1-164-937-11 CERAMIC CHIP 0.001uF 10%  
1-165-884-11 CERAMIC CHIP 2.2uF  
1-164-943-11 CERAMIC CHIP 0.01uF  
5%  
5%  
50V  
50V  
50V  
6.3V  
16V  
C821  
C822  
C823  
C825  
C826  
1-164-874-11 CERAMIC CHIP 100PF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-164-937-11 CERAMIC CHIP 0.001uF 10%  
1-164-937-11 CERAMIC CHIP 0.001uF 10%  
5%  
10%  
10%  
50V  
10V  
10V  
50V  
50V  
10%  
10%  
C934  
C936  
C938  
C939  
C940  
1-165-884-11 CERAMIC CHIP 2.2uF  
1-165-884-11 CERAMIC CHIP 2.2uF  
1-165-884-11 CERAMIC CHIP 2.2uF  
1-100-453-11 TANTALUM CHIP 22uF  
1-100-453-11 TANTALUM CHIP 22uF  
10%  
10%  
10%  
20%  
20%  
6.3V  
6.3V  
6.3V  
6.3V  
6.3V  
C827  
C835  
C836  
C838  
C839  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-100-442-11 TANTALUM CHIP 10uF  
1-100-442-11 TANTALUM CHIP 10uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
10%  
10%  
20%  
20%  
10%  
10V  
10V  
6.3V  
6.3V  
10V  
C941  
C942  
C948  
C949  
1-100-352-11 CERAMIC CHIP 1uF  
1-100-352-11 CERAMIC CHIP 1uF  
1-100-453-11 TANTALUM CHIP 22uF  
1-100-844-11 TANTALUM CHIP 22uF  
20%  
20%  
20%  
20%  
16V  
16V  
6.3V  
10V  
C843  
C845  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
10%  
10%  
10V  
10V  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
MAIN  
Ref. No.  
C951  
Part No.  
Description  
Remark  
6.3V  
Ref. No.  
F351  
Part No.  
Description  
< FUSE >  
Remark  
1-100-841-11 TANTALUM CHIP 100uF  
20%  
C952  
C954  
C955  
C957  
1-100-841-11 TANTALUM CHIP 100uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
1-100-844-11 TANTALUM CHIP 22uF  
1-125-777-11 CERAMIC CHIP 0.1uF  
20%  
10%  
20%  
10%  
6.3V  
10V  
10V  
10V  
1-576-439-41 FUSE (SMD)  
< FERRITE BEAD/SHORT >  
FB101 1-400-807-21 BEAD, FERRITE (1005)  
FB102 1-414-594-11 INDUCTOR, FERRITE BEAD  
FB151 1-400-180-21 INDUCTOR, EMI FERRITE (1608)  
FB201 1-400-807-21 BEAD, FERRITE (1005)  
FB202 1-414-594-11 INDUCTOR, FERRITE BEAD  
< CONNECTOR >  
CN451 1-818-137-21 CONNECTOR (CRADLE) (USB)  
CN471 1-818-537-21 CONNECTOR, FPC (ZIF) 11P  
CN491 1-818-471-21 CONNECTOR, FPC (ZIF) 8P  
CN501 1-818-539-21 CONNECTOR, FPC (ZIF) 26P  
CN701 1-818-536-21 CONNECTOR, FPC (ZIF) 10P  
FB251 1-400-180-21 INDUCTOR, EMI FERRITE (1608)  
FB301 1-400-807-21 BEAD, FERRITE (1005)  
FB302 1-414-594-11 INDUCTOR, FERRITE BEAD  
FB303 1-400-807-21 BEAD, FERRITE (1005)  
FB304 1-400-807-21 BEAD, FERRITE (1005)  
< DIODE >  
D152  
D252  
D301  
D352  
D401  
8-719-046-91 DIODE MA2S111  
8-719-046-91 DIODE MA2S111  
8-719-056-54 DIODE MAZS068008SO  
8-719-081-71 DIODE DF8A6.8FK (TE85R)  
6-500-369-01 DIODE FT1J3TP  
FB351 1-400-180-21 INDUCTOR, EMI FERRITE (1608)  
FB353 1-414-594-11 INDUCTOR, FERRITE BEAD  
FB354 1-414-594-11 INDUCTOR, FERRITE BEAD  
FB355 1-414-594-11 INDUCTOR, FERRITE BEAD  
FB357 1-414-594-11 INDUCTOR, FERRITE BEAD  
D431  
D451  
D455  
D456  
D457  
D491  
6-500-483-01 DIODE MA22D2800LS0  
6-500-776-01 DIODE MAZW068H0LS0  
8-719-056-54 DIODE MAZS068008SO  
8-719-056-54 DIODE MAZS068008SO  
8-719-056-54 DIODE MAZS068008SO (EXCEPT US, E18, JE)  
8-719-056-54 DIODE MAZS068008SO  
FB451 1-469-869-21 INDUCTOR (EMI FERRITE) (2012)  
FB453 1-469-869-21 INDUCTOR (EMI FERRITE) (2012)  
FB454 1-469-869-21 INDUCTOR (EMI FERRITE) (2012)  
FB501 1-400-620-21 INDUCTOR, FERRITE BEAD (1005)  
FB502 1-216-864-11 SHORT CHIP  
0
D501  
D601  
D602  
D603  
D604  
8-719-056-54 DIODE MAZS068008SO  
8-719-072-27 DIODE MA2Z748001S0  
6-500-483-01 DIODE MA22D2800LS0  
6-500-483-01 DIODE MA22D2800LS0  
6-500-483-01 DIODE MA22D2800LS0  
FB503 1-216-864-11 SHORT CHIP  
FB801 1-414-226-21 INDUCTOR, FERRITE BEAD  
FB802 1-216-864-11 SHORT CHIP  
FB803 1-216-864-11 SHORT CHIP  
FB807 1-216-864-11 SHORT CHIP  
0
0
0
0
D605  
D606  
D607  
D608  
D609  
6-500-910-01 DIODE MA2SD3000LS0  
6-500-909-01 DIODE MA22D1700LS0  
6-500-909-01 DIODE MA22D1700LS0  
6-500-910-01 DIODE MA2SD3000LS0  
8-719-072-27 DIODE MA2Z748001S0  
FB808 1-216-864-11 SHORT CHIP  
FB809 1-216-864-11 SHORT CHIP  
FB810 1-216-864-11 SHORT CHIP  
0
0
0
< IC >  
D610  
D611  
D613  
D614  
D615  
8-719-072-27 DIODE MA2Z748001S0  
6-500-912-01 DIODE MA2SD3100LS0  
8-719-072-27 DIODE MA2Z748001S0  
8-719-422-49 DIODE MA8056-L  
IC301  
IC302  
IC351  
IC401  
IC501  
6-702-894-01 IC AK5356VN-L  
6-706-528-01 IC XC6219B212MR  
6-704-998-01 IC CXD9811K (TE4)  
6-704-638-01 IC MM1655LCBE  
6-705-012-01 IC SN761059ZQLR  
6-500-483-01 DIODE MA22D2800LS0  
D616  
D617  
D618  
D801  
D803  
6-500-909-01 DIODE MA22D1700LS0  
6-500-909-01 DIODE MA22D1700LS0  
6-500-912-01 DIODE MA2SD3100LS0  
6-500-912-01 DIODE MA2SD3100LS0  
6-500-813-01 DIODE MA2SD32008S0  
IC502  
IC601  
IC602  
IC603  
IC604  
6-706-095-01 IC R1180Q301B-TR-FA  
6-705-000-01 IC SC901585VAR2  
6-703-317-01 IC R1160N121B-TR-FA  
6-706-079-01 IC R1180Q121C-TR-FA  
6-706-214-01 IC TC7SL32FU (TE85R)  
D871  
D881  
D882  
D883  
D884  
6-500-813-01 DIODE MA2SD32008S0  
8-719-072-27 DIODE MA2Z748001S0  
8-719-072-27 DIODE MA2Z748001S0  
8-719-072-27 DIODE MA2Z748001S0  
6-500-483-01 DIODE MA22D2800LS0  
IC605  
IC701  
IC801  
IC804  
IC871  
6-702-590-01 IC XC61CN1702NR  
6-705-001-01 IC SC901583EPR2  
8-753-225-26 IC CXD2681-222GG  
6-706-089-01 IC XC61CC2502NR  
6-703-012-01 IC R2061K01-E2  
D901  
D902  
D903  
D904  
D905  
8-719-072-27 DIODE MA2Z748001S0  
8-719-072-27 DIODE MA2Z748001S0  
8-719-072-27 DIODE MA2Z748001S0  
8-719-072-27 DIODE MA2Z748001S0  
8-719-072-27 DIODE MA2Z748001S0  
IC872  
IC873  
IC881  
IC882  
IC891  
6-706-096-01 IC R1180Q331C-TR-FA  
6-703-011-01 IC TC7SZ126AFE  
8-759-664-89 IC XC61CN3102NR  
6-706-094-01 IC R1180Q221B-TR-FA  
(Not supplied) IC AK6514CN-L  
D906  
8-719-072-27 DIODE MA2Z748001S0  
IC901  
IC902  
IC903  
6-704-997-01 IC SC901584EPR2  
6-706-090-01 IC XC62HR5502MR  
6-704-245-01 IC XC61CC1702NR  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                         
MZ-NH1  
MAIN  
Ref. No.  
Part No.  
Description  
< JACK >  
Remark  
Ref. No.  
Part No.  
Description  
Remark  
Q603  
Q604  
Q605  
Q606  
6-550-671-01 FET  
8-729-427-74 TRANSISTOR  
6-550-671-01 FET  
6-550-354-01 FET  
NTHC5513T1G  
XP4601  
NTHC5513T1G  
RTQ035P02TR  
J301  
J302  
J351  
1-815-950-12 JACK (LINE IN (OPT))  
1-818-135-11 JACK (MIC (PLUG IN POWER))  
1-816-153-21 JACK (i/LINE)  
Q607  
Q611  
Q801  
Q802  
Q803  
8-729-427-74 TRANSISTOR  
6-550-353-01 FET  
8-729-051-50 FET  
8-729-047-68 FET  
8-729-037-52 TRANSISTOR  
XP4601  
SI1410EDH-T1  
XP152A12C0MR  
SSM3K03FE (TPL3)  
< COIL/SHORT >  
L152  
L252  
L303  
L501  
L502  
1-400-582-21 INDUCTOR  
1-400-582-21 INDUCTOR  
1-400-342-21 INDUCTOR  
1-216-296-11 SHORT CHIP  
1-469-535-21 INDUCTOR  
47uH  
47uH  
10uH  
0
2SD2216J-QR (TX).SO  
Q881  
Q882  
Q883  
Q884  
Q951  
8-729-037-75 TRANSISTOR  
8-729-030-46 TRANSISTOR  
8-729-030-46 TRANSISTOR  
6-550-353-01 FET  
UN9214J-(TX).SO  
XP4314-TX  
XP4314-TX  
SI1410EDH-T1  
XP4601  
10uH  
L503  
L504  
L505  
L506  
L507  
1-469-535-21 INDUCTOR  
1-469-535-21 INDUCTOR  
1-469-535-21 INDUCTOR  
1-469-535-21 INDUCTOR  
1-216-864-11 SHORT CHIP  
10uH  
10uH  
10uH  
10uH  
0
8-729-427-74 TRANSISTOR  
< RESISTOR >  
R101  
R103  
R106  
R107  
R151  
1-208-927-11 METAL CHIP  
1-208-715-11 METAL CHIP  
1-208-707-11 METAL CHIP  
1-208-715-11 METAL CHIP  
1-218-957-11 RES-CHIP  
47K  
22K  
10K  
22K  
2.2K  
0.5% 1/16W  
0.5% 1/16W  
0.5% 1/16W  
0.5% 1/16W  
L601  
L605  
L606  
L607  
L701  
1-400-402-21 INDUCTOR  
1-456-711-21 INDUCTOR  
1-400-306-11 INDUCTOR  
1-456-722-21 INDUCTOR  
1-216-296-11 SHORT CHIP  
4.7uH  
100uH  
100uH  
100uH  
0
5%  
1/16W  
R154  
R201  
R203  
R206  
R207  
1-218-957-11 RES-CHIP  
1-208-927-11 METAL CHIP  
1-208-715-11 METAL CHIP  
1-208-707-11 METAL CHIP  
1-208-715-11 METAL CHIP  
2.2K  
47K  
22K  
10K  
22K  
5%  
1/16W  
0.5% 1/16W  
0.5% 1/16W  
0.5% 1/16W  
0.5% 1/16W  
L702  
L703  
L704  
L801  
L802  
1-456-724-21 FERRITE  
1-216-296-11 SHORT CHIP  
1-456-724-21 FERRITE  
1-469-535-21 INDUCTOR  
1-400-343-21 INDUCTOR  
22uH  
0
22uH  
10uH  
22uH  
R251  
R254  
R301  
R304  
R305  
1-218-957-11 RES-CHIP  
1-218-957-11 RES-CHIP  
1-218-953-11 RES-CHIP  
1-218-977-11 RES-CHIP  
1-218-941-11 RES-CHIP  
2.2K  
2.2K  
1K  
100K  
100  
5%  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
1/16W  
L803  
L804  
L870  
L901  
L902  
1-216-797-11 METAL CHIP  
1-216-797-11 METAL CHIP  
1-400-342-21 INDUCTOR  
1-456-725-21 INDUCTOR  
1-456-725-21 INDUCTOR  
10  
10  
10uH  
100uH  
100uH  
5%  
5%  
1/10W  
1/10W  
R306  
R307  
R308  
R309  
R310  
1-218-965-11 RES-CHIP  
1-218-941-11 RES-CHIP  
1-216-864-11 SHORT CHIP  
1-218-953-11 RES-CHIP  
1-218-953-11 RES-CHIP  
10K  
100  
0
5%  
5%  
1/16W  
1/16W  
L903  
L904  
L906  
L907  
1-400-342-21 INDUCTOR  
1-400-342-21 INDUCTOR  
1-456-723-21 COIL, CHOKE  
1-456-723-21 COIL, CHOKE  
10uH  
10uH  
220uH  
220uH  
1K  
1K  
5%  
5%  
1/16W  
1/16W  
R313  
R314  
R315  
R351  
R352  
1-208-635-11 METAL CHIP  
1-218-990-11 SHORT CHIP  
1-218-990-11 SHORT CHIP  
1-218-953-11 RES-CHIP  
1-218-973-11 RES-CHIP  
10  
0
0
1K  
47K  
0.5% 1/16W  
< LINE FILTER >  
LF451 1-456-111-11 COIL, COMMON MODE CHOKE  
< TRANSISTOR >  
5%  
5%  
1/16W  
1/16W  
R353  
R354  
R355  
R356  
R357  
1-208-715-11 METAL CHIP  
1-218-990-11 SHORT CHIP  
1-218-989-11 RES-CHIP  
1-218-990-11 SHORT CHIP  
1-218-990-11 SHORT CHIP  
22K  
0
1M  
0
0
0.5% 1/16W  
5% 1/16W  
Q151  
Q251  
Q301  
Q351  
Q352  
8-729-050-32 TRANSISTOR  
8-729-050-32 TRANSISTOR  
8-729-051-23 TRANSISTOR  
6-550-859-01 FET  
2SC5585TL  
2SC5585TL  
2SA2018TL  
NTHD4508NT1G  
UN9113J-(TX).SO  
8-729-037-61 TRANSISTOR  
R358  
R360  
R361  
R363  
R364  
1-218-990-11 SHORT CHIP  
1-218-990-11 SHORT CHIP  
1-208-635-11 METAL CHIP  
1-218-990-11 SHORT CHIP  
1-218-990-11 SHORT CHIP  
0
0
10  
0
Q401  
Q404  
Q405  
Q431  
Q432  
6-550-326-01 TRANSISTOR  
6-550-192-01 TRANSISTOR  
8-729-055-00 TRANSISTOR  
8-729-046-45 FET  
FZT968TA  
DTC144EET1  
UP04313008S0  
SI2302DS-T1  
FZT688B-TP  
0.5% 1/16W  
0
8-729-044-57 TRANSISTOR  
R401  
R402  
R403  
R404  
R405  
1-218-957-11 RES-CHIP  
1-245-454-21 METAL CHIP  
1-245-639-11 METAL CHIP  
1-245-638-21 METAL CHIP  
1-218-990-11 SHORT CHIP  
2.2K  
0.022  
2.2  
1
5%  
1%  
1%  
1%  
1/16W  
1/5W  
1/2W  
1W  
Q501  
Q502  
Q503  
Q504  
Q601  
6-550-674-01 FET  
MCH6604-K-TL-E  
2SA1745-6.7-TL-E  
2SD2216J-QR (TX).SO  
2SC4627J-C (TX).SO  
CPH5614-TL-E  
8-729-034-59 TRANSISTOR  
8-729-037-52 TRANSISTOR  
8-729-037-89 TRANSISTOR  
6-550-357-01 FET  
0
R407  
R411  
1-218-990-11 SHORT CHIP  
1-208-935-11 METAL CHIP  
0
Q602  
6-550-740-01 FET  
MCH6617-TL-E  
100K  
0.5% 1/16W  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
MAIN  
Ref. No.  
Part No.  
Description  
Remark  
1/16W  
Ref. No.  
Part No.  
Description  
Remark  
R412  
R413  
R414  
1-218-990-11 SHORT CHIP  
1-220-804-11 RES-CHIP  
1-208-943-11 METAL CHIP  
0
2.2M  
220K  
5%  
R622  
R623  
R624  
R625  
R628  
1-244-161-11 RES-CHIP  
1-244-161-11 RES-CHIP  
1-218-985-11 RES-CHIP  
1-218-985-11 RES-CHIP  
1-218-933-11 RES-CHIP  
2.2  
2.2  
470K  
470K  
22  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
1/16W  
0.5% 1/16W  
5%  
5%  
5%  
5%  
R415  
R416  
R417  
R418  
R421  
1-218-957-11 RES-CHIP  
1-218-989-11 RES-CHIP  
1-218-957-11 RES-CHIP  
1-218-977-11 RES-CHIP  
1-208-935-11 METAL CHIP  
2.2K  
1M  
2.2K  
100K  
100K  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
R629  
R630  
R631  
R632  
R633  
1-220-804-11 RES-CHIP  
1-218-990-11 SHORT CHIP  
1-218-985-11 RES-CHIP  
1-218-989-11 RES-CHIP  
1-208-935-11 METAL CHIP  
2.2M  
0
470K  
1M  
5%  
1/16W  
0.5% 1/16W  
5%  
5%  
1/16W  
1/16W  
0.5% 1/16W  
R431  
R432  
R433  
R453  
R455  
1-218-989-11 RES-CHIP  
1-245-456-21 METAL CHIP  
1-245-455-21 METAL CHIP  
1-220-804-11 RES-CHIP  
1-218-989-11 RES-CHIP  
1M  
1
0.47  
2.2M  
1M  
5%  
1%  
1%  
5%  
5%  
1/16W  
1/5W  
1/5W  
1/16W  
1/16W  
100K  
R634  
R635  
R636  
R637  
R638  
1-218-977-11 RES-CHIP  
1-216-864-11 SHORT CHIP  
1-216-864-11 SHORT CHIP  
1-216-864-11 SHORT CHIP  
1-216-864-11 SHORT CHIP  
100K  
5%  
1/16W  
0
0
0
0
R456  
R458  
R459  
R471  
R473  
1-218-985-11 RES-CHIP  
1-220-804-11 RES-CHIP  
1-218-981-11 RES-CHIP  
1-218-990-11 SHORT CHIP  
1-218-941-11 RES-CHIP  
470K  
2.2M  
220K  
0
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
R640  
R641  
R642  
R643  
R644  
1-218-989-11 RES-CHIP  
1-245-456-21 METAL CHIP  
1-245-456-21 METAL CHIP  
1-218-981-11 RES-CHIP  
1-218-985-11 RES-CHIP  
1M  
1
1
220K  
470K  
5%  
1%  
1%  
5%  
5%  
1/16W  
1/5W  
1/5W  
1/16W  
1/16W  
100  
5%  
5%  
1/16W  
1/16W  
R474  
R475  
R491  
R492  
R493  
1-218-941-11 RES-CHIP  
1-218-990-11 SHORT CHIP  
1-208-699-11 METAL CHIP  
1-208-699-11 METAL CHIP  
1-218-990-11 SHORT CHIP  
100  
0
4.7K  
4.7K  
0
0.5% 1/16W  
0.5% 1/16W  
R645  
R647  
R648  
R650  
R651  
1-218-985-11 RES-CHIP  
1-218-990-11 SHORT CHIP  
1-218-969-11 RES-CHIP  
1-220-804-11 RES-CHIP  
1-216-789-11 METAL CHIP  
470K  
0
22K  
2.2M  
2.2  
5%  
1/16W  
5%  
5%  
5%  
1/16W  
1/16W  
1/10W  
R501  
R502  
R503  
R504  
R505  
1-218-957-11 RES-CHIP  
1-218-953-11 RES-CHIP  
1-218-977-11 RES-CHIP  
1-218-977-11 RES-CHIP  
1-208-635-11 METAL CHIP  
2.2K  
1K  
100K  
100K  
10  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
R653  
R654  
R656  
R657  
R658  
1-218-990-11 SHORT CHIP  
1-220-804-11 RES-CHIP  
1-218-990-11 SHORT CHIP  
1-218-945-11 RES-CHIP  
1-218-990-11 SHORT CHIP  
0
0.5% 1/16W  
2.2M  
0
220  
0
5%  
5%  
1/16W  
1/16W  
R507  
R508  
R509  
R510  
R511  
1-218-957-11 RES-CHIP  
1-218-957-11 RES-CHIP  
1-218-990-11 SHORT CHIP  
1-216-864-11 SHORT CHIP  
1-218-990-11 SHORT CHIP  
2.2K  
2.2K  
0
0
0
5%  
5%  
1/16W  
1/16W  
R660  
R663  
R668  
R701  
R702  
1-216-864-11 SHORT CHIP  
1-218-945-11 RES-CHIP  
1-216-864-11 SHORT CHIP  
1-216-864-11 SHORT CHIP  
1-216-864-11 SHORT CHIP  
0
220  
0
0
0
5%  
1/16W  
R512  
R513  
R514  
R515  
R516  
1-218-990-11 SHORT CHIP  
1-218-965-11 RES-CHIP  
1-218-973-11 RES-CHIP  
1-218-965-11 RES-CHIP  
1-218-973-11 RES-CHIP  
0
10K  
47K  
10K  
47K  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
R703  
R704  
R706  
R707  
R801  
1-216-864-11 SHORT CHIP  
1-216-864-11 SHORT CHIP  
1-218-990-11 SHORT CHIP  
1-218-953-11 RES-CHIP  
1-218-961-11 RES-CHIP  
0
0
0
1K  
4.7K  
R517  
R518  
R519  
R520  
R524  
1-218-965-11 RES-CHIP  
1-218-973-11 RES-CHIP  
1-218-953-11 RES-CHIP  
1-218-949-11 RES-CHIP  
1-218-945-11 RES-CHIP  
10K  
47K  
1K  
470  
220  
5%  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
1/16W  
5%  
5%  
1/16W  
1/16W  
R802  
R804  
R805  
R806  
R807  
1-218-937-11 RES-CHIP  
1-218-933-11 RES-CHIP  
1-218-933-11 RES-CHIP  
1-218-961-11 RES-CHIP  
1-218-957-11 RES-CHIP  
47  
22  
22  
4.7K  
2.2K  
5%  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
1/16W  
R525  
R526  
R561  
R603  
R604  
1-216-864-11 SHORT CHIP  
1-218-990-11 SHORT CHIP  
1-218-981-11 RES-CHIP  
1-218-985-11 RES-CHIP  
1-218-990-11 SHORT CHIP  
0
0
220K  
470K  
0
5%  
5%  
1/16W  
1/16W  
R808  
R809  
R810  
R811  
R812  
1-218-953-11 RES-CHIP  
1-218-990-11 SHORT CHIP  
1-218-990-11 SHORT CHIP  
1-218-965-11 RES-CHIP  
1-218-977-11 RES-CHIP  
1K  
0
0
10K  
100K  
5%  
1/16W  
R605  
R608  
R609  
R610  
R612  
1-218-965-11 RES-CHIP  
1-218-446-11 METAL CHIP  
1-218-981-11 RES-CHIP  
1-218-965-11 RES-CHIP  
1-220-804-11 RES-CHIP  
10K  
1
220K  
10K  
2.2M  
5%  
5%  
5%  
5%  
5%  
1/16W  
1/10W  
1/16W  
1/16W  
1/16W  
5%  
5%  
1/16W  
1/16W  
R813  
R814  
R815  
R817  
R818  
1-218-990-11 SHORT CHIP  
1-218-965-11 RES-CHIP  
1-218-981-11 RES-CHIP  
1-218-953-11 RES-CHIP  
1-218-957-11 RES-CHIP  
0
10K  
220K  
1K  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
R616  
R617  
R619  
R620  
R621  
1-218-953-11 RES-CHIP  
1-218-965-11 RES-CHIP  
1-218-945-11 RES-CHIP  
1-244-161-11 RES-CHIP  
1-244-161-11 RES-CHIP  
1K  
5%  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
1/16W  
10K  
220  
2.2  
2.2  
2.2K  
R819  
R820  
1-218-953-11 RES-CHIP  
1-218-945-11 RES-CHIP  
1K  
220  
5%  
5%  
1/16W  
1/16W  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
MAIN  
Ref. No.  
Part No.  
Description  
Remark  
Ref. No.  
Part No.  
Description  
Remark  
R821  
R822  
R823  
1-220-804-11 RES-CHIP  
1-218-989-11 RES-CHIP  
1-218-965-11 RES-CHIP  
2.2M  
1M  
10K  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
R895  
R902  
R903  
R904  
R906  
1-218-990-11 SHORT CHIP  
1-218-941-11 RES-CHIP  
1-218-989-11 RES-CHIP  
1-218-989-11 RES-CHIP  
1-218-977-11 RES-CHIP  
0
100  
1M  
1M  
100K  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
R824  
R825  
R826  
R827  
R828  
1-208-635-11 METAL CHIP  
1-218-990-11 SHORT CHIP  
1-218-990-11 SHORT CHIP  
1-208-635-11 METAL CHIP  
1-218-957-11 RES-CHIP  
10  
0
0
10  
2.2K  
0.5% 1/16W  
0.5% 1/16W  
R907  
R908  
R910  
R912  
R914  
1-218-965-11 RES-CHIP  
1-218-969-11 RES-CHIP  
1-208-715-11 METAL CHIP  
1-218-981-11 RES-CHIP  
1-208-707-11 METAL CHIP  
10K  
22K  
22K  
220K  
10K  
5%  
5%  
1/16W  
1/16W  
5%  
5%  
1/16W  
1/16W  
0.5% 1/16W  
5% 1/16W  
0.5% 1/16W  
R830  
R832  
R833  
R834  
R835  
1-218-990-11 SHORT CHIP  
1-218-933-11 RES-CHIP  
1-216-864-11 SHORT CHIP  
1-208-943-11 METAL CHIP  
1-218-985-11 RES-CHIP  
0
22  
0
220K  
470K  
0.5% 1/16W  
5% 1/16W  
R917  
R918  
R922  
R923  
R924  
1-218-981-11 RES-CHIP  
1-218-985-11 RES-CHIP  
1-218-977-11 RES-CHIP  
1-218-990-11 SHORT CHIP  
1-218-985-11 RES-CHIP  
220K  
470K  
100K  
0
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
R836  
R837  
R839  
R840  
R843  
1-208-927-11 METAL CHIP  
1-218-957-11 RES-CHIP  
1-218-990-11 SHORT CHIP  
1-218-990-11 SHORT CHIP  
1-218-990-11 SHORT CHIP  
47K  
2.2K  
0
0
0
0.5% 1/16W  
5% 1/16W  
470K  
5%  
1/16W  
R925  
R926  
R927  
R929  
R931  
1-208-927-11 METAL CHIP  
1-208-935-11 METAL CHIP  
1-208-683-11 METAL CHIP  
1-208-935-11 METAL CHIP  
1-218-990-11 SHORT CHIP  
47K  
100K  
1K  
100K  
0
0.5% 1/16W  
0.5% 1/16W  
0.5% 1/16W  
0.5% 1/16W  
R845  
R846  
R847  
R848  
R849  
1-208-943-11 METAL CHIP  
1-218-973-11 RES-CHIP  
1-218-990-11 SHORT CHIP  
1-218-990-11 SHORT CHIP  
1-218-990-11 SHORT CHIP  
220K  
47K  
0
0
0
0.5% 1/16W  
5%  
1/16W  
R933  
R934  
R935  
R936  
R937  
1-208-943-11 METAL CHIP  
1-208-715-11 METAL CHIP  
1-208-935-11 METAL CHIP  
1-208-927-11 METAL CHIP  
1-208-715-11 METAL CHIP  
220K  
22K  
100K  
47K  
0.5% 1/16W  
0.5% 1/16W  
0.5% 1/16W  
0.5% 1/16W  
0.5% 1/16W  
R850  
R852  
R854  
R855  
R856  
1-216-864-11 SHORT CHIP  
1-218-990-11 SHORT CHIP  
1-218-990-11 SHORT CHIP  
1-218-990-11 SHORT CHIP  
1-218-990-11 SHORT CHIP  
0
0
0
0
0
22K  
R938  
R939  
R940  
R941  
R944  
1-208-927-11 METAL CHIP  
1-208-927-11 METAL CHIP  
1-218-981-11 RES-CHIP  
1-218-990-11 SHORT CHIP  
1-218-990-11 SHORT CHIP  
47K  
47K  
220K  
0
0.5% 1/16W  
0.5% 1/16W  
5%  
1/16W  
R857  
R858  
R859  
R860  
R861  
1-218-990-11 SHORT CHIP  
1-218-957-11 RES-CHIP  
1-218-989-11 RES-CHIP  
1-218-989-11 RES-CHIP  
1-218-941-11 RES-CHIP  
0
2.2K  
1M  
1M  
100  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
0
R945  
R946  
R947  
R952  
R953  
1-218-990-11 SHORT CHIP  
1-218-977-11 RES-CHIP  
1-218-973-11 RES-CHIP  
1-218-973-11 RES-CHIP  
1-218-973-11 RES-CHIP  
0
100K  
47K  
47K  
47K  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
R862  
R863  
R864  
R865  
R866  
1-218-990-11 SHORT CHIP  
1-218-990-11 SHORT CHIP  
1-218-990-11 SHORT CHIP  
1-218-990-11 SHORT CHIP  
1-218-990-11 SHORT CHIP  
0
0
0
0
0
R954  
R956  
R957  
R958  
1-218-985-11 RES-CHIP  
1-218-973-11 RES-CHIP  
1-218-985-11 RES-CHIP  
1-218-990-11 SHORT CHIP  
470K  
47K  
470K  
0
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
R867  
R868  
R869  
R870  
R871  
1-218-990-11 SHORT CHIP  
1-218-990-11 SHORT CHIP  
1-218-989-11 RES-CHIP  
1-218-990-11 SHORT CHIP  
1-218-981-11 RES-CHIP  
0
0
1M  
0
5%  
5%  
1/16W  
1/16W  
< COMPOSITION CIRCUIT BLOCK >  
220K  
RB701 1-233-963-21 RES, NETWORK (CHIP TYPE) 2.2K  
RB702 1-233-967-11 RES, NETWORK (CHIP TYPE) 10K  
R872  
R876  
R881  
R882  
R883  
1-218-990-11 SHORT CHIP  
1-218-990-11 SHORT CHIP  
1-218-989-11 RES-CHIP  
1-218-977-11 RES-CHIP  
1-218-977-11 RES-CHIP  
0
0
< SWITCH >  
1M  
100K  
100K  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
S431  
1-786-545-21 SWITCH, PUSH LEVER (S)  
(BATTERY INSERT DETECT)  
1-786-672-21 SWITCH, PUSH (2 KEY) (PROTECT DETECT)  
1-786-448-21 SWITCH, PUSH (1 KEY) (HALF LOCK)  
1-786-101-22 SWITCH, DETECTION (OPEN/CLOSE DETECT)  
1-786-436-21 SWITCH, SLIDE (HOLD)  
S891  
S892  
S893  
S895  
R884  
R885  
R886  
R887  
R888  
1-218-981-11 RES-CHIP  
1-218-973-11 RES-CHIP  
1-220-804-11 RES-CHIP  
1-218-981-11 RES-CHIP  
1-218-990-11 SHORT CHIP  
220K  
47K  
2.2M  
220K  
0
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
< VIBRATOR >  
R890  
R891  
R892  
R893  
R894  
1-218-965-11 RES-CHIP  
1-218-977-11 RES-CHIP  
1-218-977-11 RES-CHIP  
1-218-990-11 SHORT CHIP  
1-218-965-11 RES-CHIP  
10K  
100K  
100K  
0
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
X801  
X802  
X872  
1-795-780-21 VIBRATOR, CERAMIC (48MHz)  
1-795-779-21 VIBRATOR, CRYSTAL (22.5792MHz)  
1-795-602-11 VIBRATOR, CRYSTAL (32.768kHZ)  
************************************************************  
10K  
5%  
1/16W  
The components identified by mark 0 or dotted  
line with mark 0 are critical for safety.  
Replace only with part number specified.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
Ref. No.  
Part No.  
Description  
Remark  
Ref. No.  
Part No.  
Description  
Remark  
MISCELLANEOUS  
**************  
0501  
0501  
0501  
0501  
0501  
1-478-393-11 ADAPTOR, AC (AC-ES608K) (US, TW)  
1-478-394-11 ADAPTOR, AC (AC-ES608K) (AEP, E18)  
1-478-395-11 ADAPTOR, AC (AC-ES608K) (UK, HK)  
1-478-396-11 ADAPTOR, AC (AC-ES608K) (KR)  
1-478-397-11 ADAPTOR, AC (AC-ES608K) (JE)  
10  
64  
1-805-493-11 LCD MODULE  
1-478-469-11 SWITCH UNIT  
0163  
X-2021-779-1 SERVICE ASSY, OP (ABX-U)  
(including HR601 (OVER WRITE HEAD)) 0501  
1-478-398-11 ADAPTOR, AC (AC-ES608K) (CH)  
1-478-399-11 ADAPTOR, AC (AC-ES608K) (AUS)  
1-478-470-11 STAND, CHARGE (for SILVER)  
1-478-470-21 STAND, CHARGE (for GOLD)  
M701  
M702  
8-835-782-02 MOTOR, DC SSM18D/C-NP (SPINDLE)  
0501  
0502  
0502  
503  
8-835-778-11 MOTOR, DC SSM21A/C-NP (SLED)  
M703  
1-477-519-21 MOTOR UNIT, DC  
1-478-468-11 REMOTE COMMANDER (RM-MC40ELK)  
(OVER WRITE HEAD UP/DOWN)  
(US, AEP, UK, TW, KR, AUS)  
************************************************************  
503  
1-478-468-21 REMOTE COMMANDER (RM-MC40ELK)  
(HK, CH, E18, JE)  
ACCESSORIES  
************  
504  
505  
8-953-218-91 RECEIVER MDR-E838SP/SK SET  
1-828-071-11 CORD, CONNECTION (USB)  
1-469-089-11 FILTER, CLAMP (FERRITE CORE)  
(for RM-MC40ELK: SIZE S) (EXCEPT E18, JE)  
1-543-793-11 FILTER, CLAMP (FERRITE CORE)  
(for OPTIONAL STEREO MIKE: SIZE S)  
(EXCEPT E18, JE)  
(including FERRITE CORE)  
506  
506  
1-756-425-21 BATTERY, STORAGE, LITHIUM (LIP-4WM) (US)  
1-756-425-31 BATTERY, STORAGE, LITHIUM (LIP-4WM)  
(EXCEPT US)  
1-543-798-11 FILTER, CLAMP (FERRITE CORE)  
(for OPTIONAL CONNECTING CORD  
(ANALOG TYPE): SIZE L)  
507  
X-2022-498-1 BATTERY CASE ASSY  
(AEP, UK, HK, TW, KR, AUS, CH)  
0
1-569-007-12 ADAPTOR, CONVERSION 2P (JE)  
1-794-451-11 CONNECTOR, OPTICAL  
501  
502  
(US, AEP, UK, TW, AUS, E18)  
1-794-451-51 CONNECTOR, OPTICAL (HK, KR, CH, JE)  
2-109-705-12 CD-ROM (APPLICATION)  
(SonicStage/MD Single Burner) (US)  
2-109-705-22 CD-ROM (APPLICATION)  
(SonicStage/MD Single Burner) (AEP, UK)  
2-179-850-31 CD-ROM (APPLICATION)  
(SonicStage/MD Single Burner)  
AC power adaptor (1)  
Battery charging stand (1)  
503  
504  
(HK, TW, KR, AUS, CH, E18)  
2-179-850-41 CD-ROM (APPLICATION) (JE)  
3-220-749-01 CASE, CARRYING (EXCEPT US)  
3-266-450-12 MANUAL, INSTRUCTION (ENGLISH)  
(EXCEPT KR)  
3-266-450-21 MANUAL, INSTRUCTION (FRENCH) (AEP)  
3-266-450-31 MANUAL, INSTRUCTION (GERMAN) (AEP)  
3-266-450-41 MANUAL, INSTRUCTION (SPANISH) (AEP, JE)  
Remote control (1)  
Headphones/earphones (1)  
3-266-450-51 MANUAL, INSTRUCTION (DUTCH) (AEP)  
3-266-450-61 MANUAL, INSTRUCTION (SWEDISH) (AEP)  
3-266-450-71 MANUAL, INSTRUCTION (ITALIAN) (AEP)  
3-266-450-81 MANUAL, INSTRUCTION (PORTUGUESE)  
(AEP, JE)  
505  
506  
3-266-450-91 MANUAL, INSTRUCTION (FINNISH) (AEP)  
3-266-451-11 MANUAL, INSTRUCTION  
(TRADITIONAL CHINESE) (HK, TW, E18, JE)  
3-266-451-21 MANUAL, INSTRUCTION  
(SIMPLIFIED CHINESE) (CH, JE)  
Dedicated USB cable (1)  
LIP-4WM Lithium-ion  
rechargeable battery (1)  
3-266-451-31 MANUAL, INSTRUCTION (KOREAN) (KR, JE)  
507  
Rechargeable battery case (1)  
The components identified by mark 0 or dotted  
line with mark 0 are critical for safety.  
Replace only with part number specified.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MZ-NH1  
REVISION HISTORY  
Clicking the version allows you to jump to the revised page.  
Also, clicking the version at the upper right on the revised page allows you to jump to the next revised  
page.  
Ver.  
1.0  
Date  
Description of Revision  
2004.07  
2004.09  
New  
1.1  
Change of Part No. for Hi-MD3 adjustment disc HMD1GSDJ  
(SPM-04101)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp Calculator EL R287 User Manual
Shindaiwa Trimmer 81372 User Manual
Snapper Snow Blower MS3419 User Manual
Sony Car Stereo System CDX C5850R User Manual
Sony CRT Television trinitron color tv User Manual
Sony Microphone TV3033 User Manual
Sony MP3 Player Accessories TDM iP1 User Manual
Sony Robotics ERS 111 User Manual
Speco Technologies Security Camera CVC 647TP User Manual
Sylvania Flat Panel Television LC200SL8A User Manual