CCD B/W CAMERA MODULE
XC-ES50/50CE
XC-ES30/30CE
XC-EI50/50CE
XC-EI30/30CE
U ser’s
Guide
(Ver. 1.0)
—
English
—
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
OUTLINE
The XC-ES30/30CE, XC-ES50/50CE, XC-EI30/30CE, and XC-EI50/50CE are industrial black-and-white video camera
modules, each using a 1/3- or 1/2-inch IT CCD. The 1/3- and 1/2-inch C mount commonly used in industrial applications
implements compact size and lightweight. Switching of each mode on the rear panel, which has been installed from
the XC-ST series, is followed to provide improved operability. The XC-EI series uses a CCD which is sensitive on a
near infrared area to capture a clear image even in low-intensity illumination. As with the existing devices, the XC-
ES30/30CE, XC-ES50/50CE, XC-EI30/30CE, and XC-EI50/50CE incorporate significant shock and vibration resistance
to support installation on FA equipment.
MAIN FEATURES
1/3" and 1/2" IT CCD
A CCD sensitive on a near infrared area is used for the XC-EI series.
External trigger shutter function
(XC-ES50/ES30, XC-EI50/EI30: 1/4 to 1/10,000 seconds,
XC-ES50CE/ES30CE, XC-EI50CE/EI30CE: 1/4 to 1/8,000 seconds)
Restart Reset (R.R) function
Inputting HD and VD signals (2 VD or more) continuously from the outside can catch one image at arbitrary time
and control the stored CCD.
This function is used for long exposures and strobe with frame image output.
Synchronization system: Internal/external HD/VD
Inputting an HD/VD signal from the outside automatically establishes external synchronization.
This function is effective for controlling multiple cameras efficiently from the external system.
Setting each mode on rear panel
The setting of each mode can be changed by the DIP switch.
Almost all switches are located on the rear panel. This feature permits easy setting after equipment is installed.
Compact and lightweight
Compared to the existing devices, the size and weight are reduced widely.
Each of the XC-ES30/30CE, XC-ES50/50CE, XC-EI30/30CE, and XC-EI50/50CE can be used in applications
using two-piece cameras.
C-mount
Excellent shock and vibration resistance
1
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
SYSTEM CONFIGURATION
The components making up the system based on XC-E series video camera are as follows.
Video camera module
Camera cables
Camera adaptor
DC-700/700CE
XC-ES50/50CE
XC-ES30/30CE
XC-EI50/50CE
XC-EI30/30CE
CCXC-12P02N (2 m)
CCXC-12P05N (5 m)
CCXC-12P10N (10 m)
CCXC-12P25N (25 m)
Junction box
JB-77
Tripod adaptor
VCT-333I (Isolated type)
C-mount lenses
VCL-08YM
Close-up ring kit
LO-77ERK
VCL-12YM
VCL-16Y-M
VCL-25Y-M
VCL-50Y-M
SPECIFICATIONS COMPARISON
XC-ST50
XC-ES50
1/2"IT CCD
XC-EI50
XC-ST30
XC-ES30
XC-EI30
Image pickup device
1/3"IT CCD
768 (H) x494 (V)
C mount
768 (H) x494 (V)
C mount
Number of effective pixels
Lens mount
Scanning system
Sensitivity
2:1 interlaced
2:1 interlaced
400 lx F8
(γ =ON, 0dB)
400 lx F5, 6
(γ =ON, Min Gain IR
without IR cut filter)
400 lx F11
400 lx F8
(γ =ON, 0dB)
400 lx F8
(γ =ON, Min Gain IR
without IR cut filter)
400 lx F8
(γ =ON, Min Gain IR
(γ =ON, Min Gain IR
without IR cut filter)
without IR cut filter)
Minimum
0.3 lx
0.3 lx
0.1 lx
0.3 lx
0.2 lx
illuminance *
Normal shutter
1/100 to 1/10,000 seconds
1/4 to 1/10,000 seconds
1/100 to 1/10,000 seconds
1/4 to 1/10,000 seconds
External trigger shutter
Dimensions
44 (W) x29 (H) x57.5 (D) mm
44 (W) x29 (H) x57.5 (D) mm
29 (W) x29 (H) x32 (D) mm
29 (W) x29 (H) x32 (D) mm
Mass
105 g
50 g (approx.)
105 g
50 g (approx.)
Shock resistance
*F1.4, γ =ON, MAX GAIN
10G (in the X, Y, and Z directions at 20 to 200 Hz)
10G (in the X, Y, and Z directions at 20 to 200 Hz)
2
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
MAIN SPECIFICATIONS
Image pickup device
XC-ES50/50CE, XC-EI50/50CE:
1/2-inch interline transfer CCD
XC-ES30/30CE, XC-EI30/30CE:
1/3-inch interline transfer CCD
Sensitivity
XC-ES50/50CE: 400 lx F5,6 (γ =ON, MIN Gain,
without IR cut filter)
XC-ES30/30CE: 400 lx F4 (γ =ON, MIN Gain,
without IR cut filter)
Number of effective pixels
XC-ES50/EI50, XC-ES30/EI30:
768 (H)x494 (V)
XC-EI50/50CE: 400 lx F11 (γ =OFF, MIN Gain,
without IR cut filter)
XC-EI30/30CE: 400 lx F8 (γ =ON, MIN Gain,
without IR cut filter)
XC-ES50CE/EI50CE, XC-ES30CE/EI30CE:
752 (H)x582 (V)
S/N ratio
60dB
CCD horizontal driving frequency
XC-ES50/EI50, XC-ES30/EI30:
14.318 MHz
Minimum illuminance
XC-ES50/50CE, XC-ES30/30CE:
0.3 lx (F1.4 γ =ON, MAX Gain,
XC-ES50CE/EI50CE, XC-ES30CE/EI30CE:
14.187 MHz
without IR cut filter)
XC-EI50/50CE: 0.1 lx (F1.4 γ =ON, MAX Gain,
without IR cut filter)
CCD vertical driving frequency
XC-ES50/EI50, XC-ES30/EI30:
15.734 kHz
XC-EI30/30CE: 0.2 lx (F1.4 (γ =ON, MAX Gain,
without IR cut filter)
XC-ES50CE/EI50CE, XC-ES30CE/EI30CE:
15.625 kHz
Gain
AGC/Manual (Can be selected using
the switch on the rear panel.)
ON/OFF (Can be selected
using the switch on the rear
panel.)
Signal system
Cell size
EIA/CCIR
Gamma correction
XC-ES50/EI50:
8.4 (H)x9.8 (V) µ m
XC-ES50CE/EI50CE: 8.6 (H)x8.3 (V) µ m
XC-ES30/EI30: 6.35 (H)x7.4 (V) µ m
XC-ES30CE/EI30CE: 6.5 (H)x6.25 (V) µ m
Electronic shutter
XC-ES50/EI50, XC-ES30/EI30:
1/100 to 1/10,000 seconds
Lens mount
Flange back
C-mount
XC-ES50CE/EI50CE, XC-ES30CE/EI30CE:
1/120 to 1/10,000 seconds
17.526 mm
Synchronization system
Internal/external
(Selected automatically)
External sync input/output
External trigger shutter
XC-ES50/EI50, XC-ES30/EI30:
1/4 to 1/10,000 seconds
XC-ES50CE/EI50CE, XC-ES30CE/EI30CE:
1/4 to 1/8,000 seconds
HD/VD (2 to 5 Vp-p)
Automatically selected according
Set using the DIP switch on the rear panel, or
*
*
to the existence of an input signal
variable with the trigger pulse width.
when the selection switch on the rear
Supply voltage
+12 VDC (+9.0V to 16V)
panel is set to EXT.
Power consumption
Allowable frequency deviation of external synchronization
± 1 %
XC-ES30/30CE, XC-EI30/30CE:
XC-ES50/50CE, XC-EI50/50CE:
1.4W
1.6W
(in horizontal synchronous frequency)
Operating temperature
Storage temperature
–5 ˚C to +45 ˚C
–20 ˚C to +60 ˚C
Jitter
Within ± 50 nsec
2:1 interlacing
Scanning system
Performance assurance temperature
Non-interlacing
0 ˚C to +30 ˚C
(during external sync input)
Operating humidity
Storage humidity
Vibration resistance
20 to 80 % (Non-condensing)
20 to 95 % (Non-condensing)
10G (For 20 minutes in the X, Y,
and Z directions at 20 to 200 Hz)
Horizontal resolution
XC-ES50/EI50, XC-ES30/EI30:
XC-ES50CE/EI50CE, XC-ES30CE/EI30CE:
560 TV lines
570 TV lines
3
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
MAIN SPECIFICATIONS
Shock resistance
70G
External synchronization for each mode
Outside dimensions 29 (W) x 29 (H) x 32 (D) mm
External sync
Mode
Internal sync
Weight
50 g
HD/VD
VS
Standards
UL1492, FCC Class A Digital
Device, and CE (EN50081-2 +
EN50082-2)
Normal
Normal shutter
Other
Restart Reset function
Mode 1
×
×
F
rame or field integration can be
selected.
Trigger signal
generates an
internal VD
Conforms to new EIAJ and uses
12-pin assignment.
Lens mount cap (1)
Instruction Manual (1)
Mode 2
×
(single) signal.
Accessories
×
Restart Reset
×
: Can be used.
×: Cannot be used.
CONNECTION DIAGRAM
C-mount lens
AC
VIDEO OUT
VCL-08Y-M
HD/VD
WEN
TRIG
XC-ES50/50CE
XC-ES30/30CE
XC-EI50/50CE
XC-EI30/30CE
Camera adaptor
DC-700/CE
VCL-12Y-M
VCL-16Y-M
VCL-25Y-M
(Conforms to new EIAJ and uses 12-pin assignment.)
Camera cable
CCXC-12P02N
CCXC-12P05N
CCXC-12P10N
CCXC-12P25N
Tripod adaptor
VCT-333I
DC +12 V
VIDEO OUT
HD/VD
LO-77ERK
Junction box
JB-77
(No trigger input terminal is provided.)
VCL-50Y-M
Close-up ring kit
Note : All functions of the XC-ES50/50CE, XC-ES30/30CE, XC-EI50/50CE, XC-EI30/30CE
cannot be used when using DC-777/CE, DC-77RR/CE, and JB-77 is used.
Refer to the table shown below.
XC-ES50/50CE
XC-ES30/30CE
XC-EI50/50CE
XC-EI30/30CE
JB-77
Normal
Normal shutter
Restart Reset (R.R)
Restart Reset (R.R)
+
shutter
: Can be used.
×
External trigger shutter
×: Cannot be used.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
LOCATION OF PARTS AND OPERATION
XC-ES50/50CE . XC-ES30/30CE
XC-EI50/50CE . XC-EI30/30CE
1 Lens mount section (C mount)
A commercial C-mount lens as well as a
Sony standard lens can be used.
2
2 Camera mounting reference hole
(top)
These screw holes are positionned with
high precision related to CCD sensor.
4
3 Camera mounting reference
hole/Screw hole for tripod
adaptor mounting (bottom)
1
4 12-pin multi-connector
DC IN/HD/VD (DC power/sync signal
input) VIDEO OUT terminal
5 75 Ω termination selector switch
2 3
3
6 HD/VD input-output selector
switch
7
8
4
7 Shutter speed/mode setting DIP
switch
Switches 1 to 4:
Select the shutter speed.
Switch 5: Selects the frame or field
integration.
5
6
Switches 6 to 8:
412-pin multi-connector
External HD/VD
synchronization
Internal HD/VD
synchronization
Select the trigger shutter
mode.
Pin No.
γ
1
2
GND
+12 V
GND
+12 V
Switch 9: Selects correction on/off.
Switch 0: Selects the gain.
3
GND
GND
4
VIDEO output
GND
VIDEO output
GND
8 Volume control switch
This switch can be changed in the
range of Switch 0 to 18 dB when the
GAIN switch is set to “M”.
5
6
External HD input
Internal HD output
Internal VD output
GND
7
1 External VD input
*
*During factory setting, this switch is
adjusted to the mechanical center.
8
GND
–
9
–
n
10
11
12
2 WEN output
2 WEN output
*
*
When setting DIP switch 5 to the frame
integration, set the volume control
switch 8 to the MAX side from the
mechanical center (because of CCD
characteristics).
TRIG input
GND
TRIG input
GND
1: An input VD signal is required when the restart/reset mode is used.
2: A WEN output signal is valid only in the external trigger shutter mode.
*
*
• Factory-setting mode of rear panel
Corresponding
Factory-setting
mode
Switch
No.
5
6
7
75 Ω termination selector switch
ON
HD/VD input-output selector switch
Shutter speed/mode setting DIP switch
Switches 1 to 4: Select the shutter speed.
Switch 5: Selects the frame or field integration.
Switches 6 to 8: Select the trigger shutter mode.
Switch 9: Selects correction on/off.
Switch 0: Selects the gain.
EXT
OFF
FRAME
Normal
OFF
Manual
Mechanical
center
8
Volume control switch
5
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
PHASE CONDITIONS OF EXTERNAL
SYNCHRONIZATION
External synchronization for each mode
• For normal video/normal shutter
Continuous HD/VD signal (should conform to EIA and CCIR frequencies in the timing shown in the figure below.)
• For Restart Reset (RR)/external trigger shutter
Continuous HD signal. The phase between VD (reset) and HD signals is as specified in the figure below in any
timing.
Phase conditions
The phase relation between external input HD and VD signals should be set as shown below with respect to the
specified center phase.
5
200
EXT-VD
ODD
(EVEN)
100
200
EVEN
(ODD)
EXT-HD
455 (454)
455 (454)
Unit: Clock
1 CLK = 69.84 n sec
(XC-ES50/ES30, XC-EI50/EI30)
70.48 n sec
(XC-ES50CE/ES30CE, XC-EI50CE/EI30CE)
The operation in parentheses refers to XC-ES50CE/ES30CE and XC-EI50CE/EI30CE.
Note
: The synchronized VD signals are delayed for 1H at HD/VD external synchronization mode, while
there is no VD signal delay at VS external synchronization mode.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
ELECTRONIC SHUTTER
Two types of electronic shutter are provided “normal shutter and external trigger shutter”.
The electronic shutter speed and type can be set using the DIP switch on the rear panel.
DIP switch on the rear panel
Rear panel
DIP switch
Switches 1 to 4:
Selects the shutter speed.
Switch 5:
Selects the frame (0) or (1) field integration.
Switches 6 to 8:
Select the trigger shutter mode.
Switch:
γ
Selects correction ON/OFF
Switches 0:
Selects the Gain (Manual/AGC)
Normal shutter
This mode provides continuous video output with the electronic shutter selected by switches to clearly capture a
high-speed moving object.
Setting of normal shutter speed
In the flickerless mode, the
normal shutter speed is
1/100 sec for
1/8000(CCIR)
1/10000(EIA)
Shutter
Off
*
Switch
1/125
1/250
1/500
1/1000
1/2000
1/4000
Flickerless
*
0
0
0
0
1
0
0
0
0
1
0
0
1
1
0
0
0
0
1
0
1
0
1
0
0
1
1
0
1
1
1
0
–
–
–
1
1
2
3
4
5
6
7
8
XC-ES50/ES30 and
XC-EI50/EI30 (EIA) and
1/120 sec for
XC-ES50CE/ES30 CE and
XC-EI50CE/EI30CE (CCIR).
Frame: 0 / Field: 1
–
–
0
–
–
0
–
–
0
–
–
0
–
–
0
–
–
0
–
–
0
–
–
0
–
–
0
1: ON
0: OFF
–: Any
: It is recommended to set DIP switch 5 for field selection. (The field selection is about two times in sensitivity as high as the frame selection.)
Note
7
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
ELECTRONIC SHUTTER
External trigger shutter
These modes are used to capture one image (one field) per trigger pulse.
Set DIP switches 6, 7, and 8 on the rear panel to mode 1 or 2. (Refer to the table below.)
When the trigger pulse width is 1/3 sec or more, the output signal is switched to a normal video signal.
There are two modes for timing in which a video signal is obtained.
• Mode 1 (Non-reset mode)
In this mode, a video signal synchronized with a VD signal is output after a trigger pulse is input.
•
•
A video signal is synchronized with the external VD signal when an external HD/VD signal is input.
A video signal is synchronized with an internal VD signal when no external HD/VD signal is input.
• Mode 2 (Reset mode)
In this mode, an internal video signal is output from a trigger pulse after a certain period of time.
Video sync is always fixed with odd field for XC-ST70 and even field for XC-ST70CE.
For more details of each timing chart, refer to pages 16 to 23.
*
Setting of external trigger shutter speed
There are two ways to set the shutter speed.
Mode 1 (Non-reset mode)
Switch
1/100
*
1/125
1/250
1/500
1/1000 1/2000
1/4000
1/10000
**
1
2
3
4
5
6
7
8
9
0
–
–
–
1
1
0
0
0
0
1
0
0
1
1
0
0
0
0
1
0
1
0
1
0
0
1
1
0
1
1
1
0
Frame: 0 / Field: 1
0
1
1
–
–
0
1
1
–
–
0
1
1
–
–
0
1
1
–
–
0
1
1
–
–
0
1
1
–
–
0
1
1
–
–
0
1
1
–
–
Mode 2 (Reset mode)
The external trigger shutter speed is set to
1/100 sec for XC-ES50/ES30,
XC-EI50/EI30 (EIA) and 1/120 sec for
XC-ES50CE/ES30CE,
*
1/100
*
Switch
1/125
1/250
1/500
1/1000 1/2000
1/4000
1/10000
**
–
–
–
1
1
0
0
0
0
1
0
0
1
1
0
0
0
0
1
0
1
0
1
0
0
1
1
0
1
1
1
0
0
0
1
–
–
1
2
3
4
5
6
7
8
9
0
XC-EI50CE/EI30CE (CCIR).
The external trigger shutter speed is
** set to 1/10000 sec for XC-ES50/ES30,
Frame: 0 / Field: 1
XC-EI50/EI30 (EIA) and 1/8000 sec for
XC-ES50CE/ES30CE,
0
0
1
–
–
0
0
1
–
–
0
0
1
–
–
0
0
1
–
–
0
0
1
–
–
0
0
1
–
–
0
0
1
–
–
XC-EI50CE/EI30CE (CCIR).
1: ON
0: OFF
–: Any
• Using DIP switch on the rear panel
8
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
ELECTRONIC SHUTTER
• Using trigger pulse width
•
Set DIP switches 1 to 4 on the rear panel to 0.
•
An arbitrary shutter speed can be obtained by setting the trigger pulse width to the range of 2 µsec to 250
msec.
Mode 1
Mode 2
Switch
Exposure time = Trigger pulse width + 97 µsec (EIA)
(Non-reset mode) (Reset mode)
120 µsec (CCIR)
1. lt is recommended to set DIP switch 5 for field selection.
(The field selection is about two times in sensitivity as high as the frame selection.)
2. After a trigger pulse is input, a new trigger pulse must not be input before the video
signal obtained by the trigger pulse has been output.
0
0
0
0
0
0
0
0
1
2
3
4
5
6
7
8
9
0
:
Note
Frame: 0 / Field: 1
0
0
0
1
0
0
1
1
0
0
1: ON
0: OFF
Specifications of trigger pulse
A
B
T
A: 4 to 5.0 V
B: 0 to 1.0 V
T: 2 µs to 1/4 s
T: 2 µs to 1/4 s, 100 µs to 1/4 s when setting the shutter speed using DIP switch
Input impedance: 10 kW or more
*
The voltage and pulse width used are measured at pin 11 of a 12-pin multi-connector on the rear panel.
*
9
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
ELECTRONIC SHUTTER
When using a trigger pulse like shown below, set the TRIG polarity selector switch on the rear panel to – :
A
B
T
A: 4.0 to 5.0 V
B: 0 to 2.0 V
T: 2 µs to 1/4 s, 100 µs to 1/4 s when setting the shutter speed using DIP switch
Input impedance: 10 kΩ or more
*
*
The voltage and pulse width used are measured at pin 11 of a 12-pin multi-connector on the rear panel.
Specifications of WEN (Write ENable Pulse)
A
B
T
A: 5.0 V
B: 0 V
T: 15.875 ms (XC-ST70), 18.752 ms (XC-ST70CE)
Output impedance: 10 kΩ or more
*
10
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
RESTART RESET (R.R)
The information on one screen can be extracted at any time by inputting a restart/reset signal (HD/VD) from the
outside. To enter this mode, set DIP switches 6, 7, and 8 on the rear panel of a camera as shown in the table below.
The setting is especially effective for the following operation.
Restart Reset (R.R)
Switch
0
0
0
0
0
1
1
1
0
0
1
2
3
4
5
6
7
8
9
0
1: ON
0: OFF
Long exposure
A high-sensitivity image is obtained by extending the exposure time of the CCD when satisfactory sensitivity
cannot be obtained under other operating conditions or when observing the trail of a moving object.
The exposure time is determined by the VD interval (T) period between external VD pulses as follows.
• Timing and conditions
Example 1 of Long exposure
EXT HD
Continuous signal: 15.734 kHz (XC-ES50/ES30, XC-EI50/XC-EI30)Allowable frequency value ±1%,
15.625 kHz (XC-ES50CE/ES30CE, XC-EI50CE/XC-EI30CE) Allowable frequency value ±1%
EXT VD
VD interval(T): 262.5H or more (XC-ES50/ES30, XC-EI50/XC-EI30) and less than 1 second (Recommended),
312.5H or more (XC-ES50CE/ES30CE, XC-EI50CE/XC-EI30CE) and less than 1 second (Recommended)
Four or more VD pulses are required.
T
T
T
Exposure time for Odd field
Exposure time for Even field
Video output
Odd image
Even image
Invalid image
Valid frame image
Odd and even fields are determined by the phase of the EXT HD/VD signal input from the outside.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
RESTART RESET (R.R)
Example 2 of long exposure
EXT HD
EXT VD
Continuous signal: 15.734 kHz (XC-ES50/ES30, XC-EI50/XC-EI30) Allowable frequency value ±1%,
15.625 kHz (XC-ES50CE/ES30CE, XC-EI50CE/XC-EI30CE) Allowable frequency value ±1%
VD interval(T): 262.5H or more (XC-ES50/ES30, XC-EI50/XC-EI30) and less than 1 second (Recommended),
312.5H or more (XC-ES50CE/ES30CE, XC-EI50CE/XC-EI30CE) and less than 1 second (Recommended)
Four or more VD pulses are required.
T
1/60 second
1/60 second
Exposure time for Odd field
Exposure time for Even field
Video output
Odd image
Even image
Invalid image
Valid frame image
Odd and even fields are determined by the phase of the EXT HD/VD signal input from the outside.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
FRAME IMAGE OUTPUT WITH STROBE LIGHT
A full frame image with vertical resolution of 485 lines (XC-ST70) or 575 lines (XC-ST70CE) can be obtained with
a strobe light by firing the strobe when the exposure time of the two fields overlap.
• Timing and conditions
<Timing chart by restart/reset>
EXT HD
Continuous signal: 15.734 kHz (XC-ES50/ES30, XC-EI50/XC-EI30)Allowable frequency value ±1%,
15.625 kHz (XC-ES50CE/ES30CE, XC-EI50CE/XC-EI30CE) Allowable frequency value ±1%
EXT VD
VD : XC-ES50/ES30, XC-EI50/XC-EI30 (1/60sec), XC-ES50CE/ES30CE, XC-EI50CE/XC-EI30CE (1/50sec)
Four or more VD pulses are required.
Strobe light
Exposure time for Odd field
Exposure time for Even field
Video output
Odd image
Even image
Invalid image
Valid frame image
Odd and even fields are determined by the phase of the EXT HD/VD signal input from the outside.
Avoid lighting the scene during the light-emitting inhibit zone defined below. (The field is transfered to the
storage area of the CCD, so it can be read out.)
Note
: For best performance, it is recommended not to flash between VD and VD + 10H (XC-ES50/ES30, XC-EI50/EI30)/
16H (XC-ES50CE/ES30CE, XC-EI50CE/EI30CE).
13
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
(XC-ES50/EI50/ES30/EI30(EIA))
OUTPUT WAVEFORM TIMING CHART
Timing chart of horizontal output waveform
HD
91 (6.36 µs)
40
77
22
3
15
752
CCD
output
signal
Effective total pixel 768
Dummy
pixel
69.8 ns
Optical black
portion
Horizontal transfer stop period
Optical black portion
Horizontal blanking period (11.0
µs)
Output video period
Camera video
output signal
(Typical value)
67 (4.68
µs)
752 (52.5 µs)
21 HSYNC
(1.47 µs) 70
(4.89 µs)
One horizontal scanning period (1 H)
910 (63.56 s)
µ
Timing chart of vertical output waveform (2:1 interlaced frame integration)
Odd field (262.5 H)
Even field (262.5 H)
VD
9 H
253.5 H
9 H
253.5 H
2 4 6 8
1 3 5 7 9
CCD
output
signal
1
8
6
4
242.5
2
8
6
3.5
242.5
Empty
Empty
transfer
Optical black portion
transfer
Optical black portion
Camera
video
output
signal
Vertical blanking
period (20 H)
Vertical blanking
period (20 H)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
OUTPUTWAVEFORMTIMING CHART (XC-ES50/EI50/ES30/EI30(EIA))
Timing chart of vertical output waveform (2:1 interlaced field integration)
Odd field (262.5 H)
Even field (262.5 H)
VD
9 H
253.5 H
9 H
253.5 H
CCD
output
signal
1
8
6
4
242.5
1
8
6
3.5
242.5
Empty
Empty
transfer
Optical black portion
transfer
Optical black portion
Camera
video
output
signal
Vertical blanking
period (20 H)
Vertical blanking
period (20 H)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
OUTPUT WAVEFORM TIMING CHART (XC-ES50CE/EI50CE/ES30CE/EI30CE (CCIR))
Timing chart of horizontal output waveform
HD
98
(6.91 µs)
40
91
22
3
15
736
CCD
output
signal
Effective total pixel 752
Output video period
Dummy
pixel
70.5 ns
Optical black
portion
Horizontal transfer stop period
Optical black portion
Horizontal blanking period (12.1 µs)
Camera video
output signal
(Typical value)
81 (5.71 µs)
736 (51.9 µs)
21 HSYNC
s) 70
(4.93
(1.48
µ
µ
s)
One horizontal scanning period (1 H)
908 (64.0 µs)
Timing chart of vertical output waveform (2:1 interlaced frame integration)
Odd field (312.5 H)
Even field (312.5 H)
VD
7.5 H
305 H
7.5 H
305 H
1 3 5 7 9
2 4 6 8
CCD
output
signal
287.5
287.5
1
14
6
3.5
2
14
6
3
Empty
Empty
transfer
Optical black portion
transfer
Optical black portion
Camera
video
output
signal
Vertical blanking
period (25 H)
Vertical blanking
period (25 H)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
U
T
PU
T
W
A
V
E
F
O
R
T
IMING CHART (XC-ES50CE/EI50CE/ES30CE/EI30CE (CCIR))
Timing chart of vertical output waveform (2:1 interlaced field integration)
Odd field (312.5 H)
Even field (312.5 H)
VD
7.5 H
305 H
7.5 H
305 H
CCD
output
signal
287.5
287.5
1
14
6
3.5
1
14
6
3
Empty
Empty
transfer
Optical black portion
transfer
Optical black portion
Camera
video
output
signal
Vertical blanking
period (25 H)
Vertical blanking
period (25 H)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
SENSOR READ CLOCK TIMING CHART
XC-ES30
HD
V1
V2
2.5
Odd Field
V3
V4
1.6
2.5 2.5 2.5
40.4
0.2
V1
V2
Even Field
V3
V4
Unit : µs
XC-ES30CE
HD
V1
V2
2.5
Odd Field
V3
V4
1.6
2.5 2.5 2.5
41.6
0.2
V1
V2
Even Field
V3
V4
Unit : µs
18
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
SENSOR READ CLOCK TIMING CHART
XC-ES50
V1
V2
2.5
Odd Field
V3
V4
1.6
2.5 2.5 2.5
33.5
0.2
V1
V2
Even Field
V3
V4
Unit : µs
XC-ES50CE
V1
V2
2.5
Odd Field
V3
V4
1.5
2.6 2.5 2.5
33.6
0.2
V1
V2
Even Field
V3
V4
Unit : µs
19
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
SENSOR READ CLOCK TIMING CHART
XC-EI30
V1
V2
2.5
Odd Field
V3
V4
1.6
2.5 2.5 2.5
33.5
0.2
V1
V2
Even Field
V3
V4
Unit : µs
XC-EI30CE
V1
V2
2.6
Odd Field
V3
V4
1.5
2.6 2.6 2.6
33.6
0.2
V1
V2
Even Field
V3
V4
Unit : µs
20
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
SENSOR READ CLOCK TIMING CHART
XC-EI50
V1
V2
2.5
Odd Field
V3
V4
1.6
2.5 2.5 2.5
33.5
0.2
V1
V2
Even Field
V3
V4
Unit : µs
XC-EI50CE
V1
V2
2.5
Odd Field
V3
V4
1.5
2.6 2.5 2.5
33.6
0.2
V1
V2
Even Field
V3
V4
Unit : µs
21
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
TIMING CHART OF EXTERNAL TRIGGER SHUTTER - MODE 1
(NON-RESET MODE)
For setting the shutter speed using TRG width
HD/VD input
Mode transition state
External input
inhibition area
(50 ms)
External trigger
shutter operation
3
External trigger shutter operation
*
Normal operation
Trigger
1
2
3
1
*
Trigger
3
*
2
*
Exposure
time Te
2
2
*
Exposure time Te
*
Exposure time Te
1
1
*
External HD
External VD
*
(
Continuous
VD)
4
10 µs or more
*
T : T = Under –65 us to +10 µs
4
*
T : T = Under –65 µs to +10 µs
EXT-VD
+10 µs
–65 µs
1
2
3
Video out
WEN
5
*
250H (XC-ES50/ES30, XC-EI50/EI30)
293H (XC-ES50CE/ES30CE, XC-EI50CE/EI30CE)
TRG
EXT-VD
EXT-VD
65 µs
10 µs
• Continuous HD/VD input
1: This is a signal input from the outside. Be sure to input both HD and VD signals in this case.
*
*
2: Exposure time Te Te = Trigger width + 97 µs (XC-ES50/ES30, XC-EI50/EI30),
Te = Trigger width + 120 µs (XC-ES50CE/ES30CE, XC-EI50CE/EI30CE)
(The trigger width should be between 2 µs and 1/4 s)
3: The normal operation state is engaged when the trigger high period exceeds 1/3sec.The external trigger
shutter operation is engaged when the trigger pulse goes “low”. In this case, the area between the falling
edge of a trigger pulse and the subsequent 50 ms period is an external trigger input inhibition area. During
the trigger inhibit period, an input trigger may be missed.
*
*
*
4: In all cases the WEN signal indicates when a valid image is available. Normally, an image is output after
the external falling edge. If the falling edge of the trigger is very close to the falling edge of the external VD,
there may be a delay of 1VD in the output. The period of uncertainty is when the falling edge of VD is
between 65 µs before or 10 µs after the falling edge of the trigger.
5: When the external trigger shutter mode changes into the normal operation mode, one WEN signal is
output.
Note
: An image is superimposed when the next exposure ends before the previous image is output.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
TIMING CHART OF EXTERNAL TRIGGER SHUTTER - MODE 1 (NON-RESET MODE)
For setting the shutter speed using TRG width
HD/VD input
Mode transition state
External input
External trigger
shutter operation
inhibition area
(50 ms)
3
External trigger shutter operation
*
Normal operation
Trigger
1
2
1
*
Trigger
3
*
2
*
Exposure
time Te
2
*
Exposure time Te
1
1
*
External HD
*
External VD
(Single VD)
4
min 10 µs
*
T : T = 10 µs to 100 ms
1
2
Video out
WEN
5
*
250H
250H
250H
(XC-ES50/ES30,
XC-EI50/EI30)
(XC-ES50/ES30,
XC-EI50/EI30)
(XC-ES50/ES30,
XC-EI50/EI30)
293H
293H
293H
(XC-ES50CE/ES30CE, (XC-ES50CE/ES30CE,
XC-EI50CE/EI30CE) XC-EI50CE/EI30CE)
(XC-ES50CE/ES30CE,
XC-EI50CE/EI30CE)
• Continuous HD input and single VD input
1: This is a signal input from the outside. Be sure to input both HD and VD signals in this case. Make the
*
*
phase of the VD signal coincide with the falling edge of the HD signal during input operation.
2: Exposure time Te Te = Trigger width + 97 µs (XC-ES50/ES30, XC-EI50/EI30),
Te = Trigger width + 120 µs (XC-ES50CE/ES30CE, XC-EI50CE/EI30CE)
(The trigger width should be between 2 µs and 1/4 s)
3: The normal operation state is engaged when the trigger high period exceeds 1/3 sec.After that the external
trigger shutter operation is engaged when the trigger pulse goes “low”. In this case, the area between the
falling edge of a trigger pulse and the subsequent 50 ms period is an external trigger input inhibition area.
During the trigger inhibit period, an input trigger may be missed.
*
*
*
4: Be sure to input an external VD signal between 10 µs and 75 ms from the falling edge of a trigger pulse (as
shown by 1 and 2 in the figure). For the input (except described above), the operation cannot be ensured.
If the external VD signal is not input under the prescribed conditions, the normal operation is engaged
several V after a change in input operation under the prescribed conditions.
5: When the external trigger shutter mode changes into the normal operation mode, one WEN signal is
output.
Note
: An image is superimposed when the next exposure ends before the previous image is output.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
TIMING CHART OF EXTERNAL TRIGGER SHUTTER - MODE 1 (NON-RESET MODE)
For setting the shutter speed using TRG width
No HD/VD input (Internal synchronization)
Mode transition state
External input
inhibition area
(50 ms)
External trigger
shutter operation
3
External trigger shutter operation
*
Normal operation
1
2
3
1
4
*
Trigger
3
*
Trigger
2
2
2
*
Exposure
time Te
*
Exposure time Te
*
Exposure time Te
*
Interrnal VD
5
5
*
T : T = 10 µs or more
*
T : T = Under 10 µs
1
2
3
Video out
WEN
6
*
250H (XC-ES50/ES30, XC-EI50/EI30)
293H (XC-ES50CE/ES30CE, XC-EI50CE/EI30CE)
1: This is a signal input from the outside.
*
*
2: Exposure time Te Te = Trigger width + 97 µs (XC-ES50/ES30, XC-EI50/EI30),
Te = Trigger width + 120 µs (XC-ES50CE/ES30CE, XC-EI50CE/EI30CE)
3: The normal operation state is engaged when the high period exceeds 1/3 sec. After that, the external
trigger shutter operation is engaged when the trigger pulse goes “low”. In this case, the area between the
falling edge of a trigger pulse and the subsequent 50 ms period is an external input inhibition area. During
the trigger inhibit period, an input trigger may be missed.
*
4: An internal VD signal is output by setting the INT/EXT switch on the rear panel to INT.
*
*
5: During external trigger shutter operation, an image is output when an internal VD signal falls after a trigger
pulse falls (as shown by 1 and 2 in the figure). However, if the time (T in the figure) between the falling
edges of a trigger pulse and internal VD signal is under 10 µs, an image is output when the internal VD
signal or the next internal VD signal falls (as shown by 3 in the figure). (In this case, an image is output
when the next internal VD signal falls.) An image and WEN signal are always output together. For more
details, refer to the WEN signal. (The falling edge of an internal VD signal is the same in phase as the
beginning of an equalizing pulse in a SYNC V area.)
6: When the external trigger shutter mode changes into the normal operation mode, one WEN signal is
output.
*
Note
: An image is superimposed when the next exposure ends before the previous image is output.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
TIMING CHART OF EXTERNAL TRIGGER SHUTTER - MODE 1 (NON-RESET MODE)
For setting the shutter speed using DIP switch
HD/VD input
• Continuous HD/VD input
Mode transition state
External input
External trigger
shutter operation
inhibition area
(50 ms)
3
3
External trigger shutter operation
*
Normal operation
Trigger
1
2
3
1
*
Trigger
*
2
*
Exposure
time Te
2
2
*
Exposure time Te
*
Exposure time Te
1
1
*
External HD
*
External VD
(Continuous
VD)
4
4
4
*
T : T = Under 10 ms
*
T : T = 10 ms or more
*
T : T = 10 ms or
more
1
2
3
Video out
WEN
250H
250H
(XC-ES50/ES30,
XC-EI50/EI30)
(XC-ES50/ES30,
XC-EI50/EI30)
293H
293H
(XC-ES50CE/ES30CE,
XC-EI50CE/EI30CE)
(XC-ES50CE/ES30CE,
XC-EI50CE/EI30CE)
1: This is a signal input from the outside.The period of a continuous VD signal is prescribed as one field. Be
sure to input both HD and VD signals.
*
2: As shown in the table on page 7, exposure time Te is determined by the setting of a DIP switch.
*
*
3: The normal operation state is engaged when the high period exceeds 1/3 sec. After that, the external
trigger shutter operation is engaged when the trigger pulse goes “low”. In this case, the area between the
falling edge of a trigger pulse and the subsequent 50 ms period is an external input inhibition area. During
the trigger inhibit period, an input trigger may be missed.
4: An image is output when an external VD signal falls 10 ms or more after a trigger pulse rises (shown by 2
and 3 in the figure). If the time (T in the figure) between the falling edges of a trigger pulse and external
VD signal is under 10 ms, an image is output when the external VD signal or the next external VD signal
falls (as shown by 1 in the figure). (In this case, an image is output when the next external VD signal falls.)
An image and WEN signal are always output together. For more details, refer to the WEN signal.
*
Note
: An image is superimposed when the next exposure ends before the previous image is output.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
TIMING CHART OF EXTERNAL TRIGGER SHUTTER - MODE 1 (NON-RESET MODE)
For setting the shutter speed using DIP switch
HD/VD input
• Continuous HD input and single VD input
Mode transition state
External input
inhibition area
(50 ms)
External trigger
shutter operation
3
External trigger shutter operation
*
Normal operation
Trigger
1
2
1
*
Trigger
3
*
2
*
Exposure
time Te
2
*
Exposure time Te
1
1
*
External HD
*
External VD
(Single VD)
min. 10 ms
4
*
T : T = 10 ms to 110 ms
1
2
Video out
WEN
250H
250H
(XC-ES50/ES30,
XC-EI50/EI30)
(XC-ES50/ES30,
XC-EI50/EI30)
293H
293H
(XC-ES50CE/ES30CE,
XC-EI50CE/EI30CE)
(XC-ES50CE/ES30CE,
XC-EI50CE/EI30CE)
1: This is a signal input from the outside. Be sure to input both HD andVD signals. Make the phase of theVD
signal coincide with the falling edge of the HD signal.
*
2: As shown in the table on page 7, exposure time Te is determined by the setting of a DIP switch.
*
*
3: The normal operation state is engaged when the high period exceeds 1/3 sec. After that, the external
trigger shutter operation is engaged when the trigger pulse goes “low”. In this case, the area between the
falling edge of a trigger pulse and the subsequent 50 ms period is an external input inhibition area. During
the trigger inhibit period, an input trigger may be missed.
4: Be sure to input an external VD signal for 10 ms to 75 ms from the rising edge of a trigger pulse (as shown
by 1 and 2 in the figure). For the input except described above, the operation cannot be ensured. If the
external VD signal is not input under the prescribed conditions, the normal operation is engaged several V
after a change in input operation under the prescribed conditions.
*
Note
: An image is superimposed when the next exposure ends before the previous image is output.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
TIMING CHART OF EXTERNAL TRIGGER SHUTTER - MODE 1 (NON-RESET MODE)
For setting the shutter speed using DIP switch
No HD/VD input (Internal synchronization)
Mode transition state
External input
External trigger
shutter operation
inhibition area
(50 ms)
3
External trigger shutter operation
*
Normal operation
Trigger
1
2
3
1
4
*
Trigger
3
*
2
2
2
*
Exposure time Te
*
Exposure time Te
*
Exposure
time Te
*
Interrnal VD
5
*
T : T = 10 ms or
more
5
5
*
T : T = 10 ms or more
*
T : T = Under 10 ms
1
2
3
Video out
WEN
250H
250H
(XC-ES50/ES30,
XC-EI50/EI30)
(XC-ES50/ES30,
XC-EI50/EI30)
293H
293H
(XC-ES50CE/ES30CE, (XC-ES50CE/ES30CE,
XC-EI50CE/EI30CE) XC-EI50CE/EI30CE)
1: This is a signal input from the outside.
*
*
*
2: As shown in the table on page 7, exposure time Te is determined by the setting of a DIP switch.
3: The normal operation state is engaged when the high period exceeds 1/3 sec. After that, the external
trigger shutter operation is engaged when the trigger pulse goes “low”. In this case, the area between the
falling edge of a trigger pulse and the subsequent 50 ms period is an external input inhibition area. During
the trigger inhibit period, an input trigger may be missed.
4: An internal VD signal is output by setting the INT/EXT switch on the rear panel to INT.
*
*
5: An image is output when an internal VD signal falls 10 ms or more after a trigger pulse rises (as shown by
2 and 3 in the figure). If the time (T in the figure) between the falling edges of a trigger pulse and internal
VD signal is under 10 ms, an image is output when the internalVD signal or the nextinternalVD signal falls
(as shown by 1 in the figure). In this case, an image is output when the next internal VD signal falls. An
image and WEN signal are always output together. For more details, refer to the WEN signal. (The falling
edge of an internal VD signal is the same in phase as the beginning of an equalizing pulse in a SYNC V
area.)
Note
: An image is superimposed when the next exposure ends before the previous image is output.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
TIMING CHART OF EXTERNAL TRIGGER SHUTTER - MODE 2
(RESET MODE)
For setting the shutter speed using TRG width
Mode transition state
External input
inhibition area
(50 ms)
External trigger
shutter operation
3
External trigger shutter operation
*
Normal operation
Trigger
1
2
1
*
Trigger
3
*
2
2
*
Exposure time Te
*
Exposure
time Te
1
Video out
WEN
2
4
*
1H to 2H
4
*
1H to 2H
250H
250H
250H
(XC-ES50/ES30,
XC-EI50/EI30)
(XC-ES50/ES30,
XC-EI50/EI30)
(XC-ES50/ES30,
XC-EI50/EI30)
293H
293H
293H
(XC-ES50CE/ES30CE,
XC-EI50CE/EI30CE)
(XC-ES50CE/ES30CE,
XC-EI50CE/EI30CE)
(XC-ES50CE/ES30CE,
XC-EI50CE/EI30CE)
1: This is a signal input from the outside. The trigger interval should be trigger pulse width + 1 field + 2H
period or more. The trigger interval shorter than described above cannot be ensured. If a trigger pulse is
not input under the prescribed conditions, the normal operation is ensured several V after a change in
input operation under the prescribed conditions.
*
2: Exposure time Te Te = Trigger width + 97 µs (XC-ES50/ES30, XC-EI50/EI30),
Te = Trigger width + 120 µs (XC-ES50CE/ES30CE, XC-EI50CE/EI30CE)
(The trigger width should be between 2 µs and 1/4 s)
*
*
3: The normal operation state is engaged when the high period exceeds 1/3 sec. After that, the external
trigger shutter operation is engaged when the trigger pulse goes “low”. In this case, the area between the
falling edge of a trigger pulse and the subsequent 50 ms period is an external input inhibition area. During
the trigger inhibit period, an input trigger may be missed.
4: AVD signal is generated 1H to 2H after a trigger pulse falls, and an image is output in synchronization with
the VD signal.
*
*
5: When the external trigger shutter mode changes into the normal operation mode, a WEN signal is output.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
TIMING CHART OF EXTERNAL TRIGGER SHUTTER - MODE 2 (RESET MODE)
For setting the shutter speed using DIP switch
Mode transition state
External input
External trigger
shutter operation
inhibition area
(50 ms)
3
External trigger shutter operation
*
Normal operation
1
2
1
*
Trigger
3
*
Trigger
2
*
Exposure time Te
2
*
Exposure
time Te
1
2
Video out
WEN
4
4
*
T
*
T
250H
250H
(XC-ES50/ES30,
XC-EI50/EI30)
(XC-ES50/ES30,
XC-EI50/EI30)
293H
293H
(XC-ES50CE/ES30CE,
XC-EI50CE/EI30CE)
(XC-ES50CE/ES30CE,
XC-EI50CE/EI30CE)
1: This is a signal input from the outside. The trigger interval should be shutter speed (DIP switch) + 1 field
+ 2H period or more. The trigger interval shorter than described above cannot be ensured. If a trigger
pulse is not input under the prescribed conditions, the normal operation is engaged several V after a
change in input operation under the prescribed conditions.
*
2: As shown in the table on page 7, exposure time Te is determined by the setting of a DIP switch.
*
*
3: The normal operation state is engaged when the high period exceeds 1/3 sec. After that, the external
trigger shutter operation is engaged when the trigger pulse goes “low”. In this case, the area between the
falling edge of a trigger pulse and the subsequent 50 ms period is an external input inhibition area. During
the trigger inhibit period, an input trigger may be missed.
4: After a period set by a DIP switch from the rising edge of the trigger, an image is output.
*
29
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
DIMENSIONS
XC-ES50/50CE, XC-EI50/EI50CE
XC-ES30/30CE, XC-EI30/EI30CE
(XC-ES30 model)
2-M2 deep 2.5
(Unit : mm)
6.5
C0.5
C0.5
6.5
5.5
29
10
32
C0.5
4-M2 deep 2.5
6.5
22
30
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
SPECTRAL RESPONSE CHARACTERISTICS
(Typycal Value)
XC-ES30
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
400
500
600
700
800
900
1000
Wave Length [nm]
XC-ES30CE
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
400
500
600
700
800
900
1000
Wave Length [nm]
31
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
SPECTRAL RESPONSE CHARACTERISTICS
(Typycal Value)
XC-ES50
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
400
500
600
700
800
900
1000
Wave Length [nm]
XC-ES50CE
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
400
500
600
700
800
900
1000
Wave Length [nm]
32
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
SPECTRAL RESPONSE CHARACTERISTICS
(Typycal Value)
XC-EI30
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
400
500
600
700
800
900
1000
Wave Length [nm]
XC-EI30CE
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
400
500
600
700
800
900
1000
Wave Length [nm]
33
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
SPECTRAL RESPONSE CHARACTERISTICS
(Typycal Value)
XC-EI50
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
400
500
600
700
800
900
1000
Wave Length [nm]
XC-EI50CE
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
400
500
600
700
800
900
1000
Wave Length [nm]
34
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
VARIOUS LENS SELECTION
The following shows the various lens specifications of the accessories available.
XC-ES50/50CE, XC-ES30/30CE
XC-EI50/50CE, XC-EI30/30CE compatibility
List of C-Mount Lens
Model name
Focal distance (mm)
VLC-08YM
8
VLC-12YM
12
VLC-16Y-M
16
VLC-25Y-M
25
VLC-50Y-M
50
1: 1.4
1: 1.8
1: 1.4
1: 1.6
1: 2.8
Maximum aperture ratio
Manual
Manual
42.6˚×32.6˚
32.6˚×24.8˚
207
Manual
Manual
29.6˚×22.4˚
22.4˚×16.9˚
208
Manual
Manual
22.6˚×17.0˚
17.0˚×12.8˚
289
Manual
Manual
14.6˚×11.0˚
11.0˚×8.2˚
204
Manual
Manual
7.3˚×5.5˚
5.5˚×4.1˚
438
Iris
Operation
Focus
Field angle
1/2" CCD
1/3" CCD
(Horizontal x vertical)
MOD (mm)
181×132.8
181.3×133.3
136.8×100
137×100.3
11.54
125.2×92.1
125.5×92.5
94.7×69.6
94.8×69.6
10.99
119.4×88.5
119.6×88.8
90×66.8
90.4×66.9
12.50
52.1×38.8
52.1×38.9
39.4×29.3
39.4×29.3
11.60
49.2×37
49.7×37.1
37.2×27.9
37.5×27.9
22.10
XC-ES50/EI50
XC-ES50CE/EI50CE
XC-ES30/EI30
XC-ES30CE/EI30CE
Image pickup range during
maximum proximity
(horizontal × vertical) (mm)
Back focus (mm)
Flange back (mm)
Mass (g)
17.526
17.526
17.526
17.526
17.526
50
40
40
50
42
MOD: Minimum object distance between the tip of the lens body and the object
35
Download from Www.Somanuals.com. All Manuals Search And Download.
XC-E series
Sony reserves the right to change specifications of the products and discontinue products without notice.
Technical information contained herein is for reference only and does not convey any license by any implication or otherwise
under any intellectual property right or other right of Sony or third parties.
Sony cannot assume responsibility for any right infringements arising out of the use of this information.
Download from Www.Somanuals.com. All Manuals Search And Download.
CCD B/W VIDEO
CAMERA MODULE
XC-ES50/50CE
XC-ES30/30CE
XC-EI50/50CE
XC-EI30/30CE
Sales Office :
Japan
Sony Corporation
4-14-1 Asahi-cho, Atsugi-shi, Kanagawa, 243-0014 Japan
Tel: +81-46-227-2346
Tel: +81-46-230-5873
Fax: +81-46-227-2347
Fax: +81-46-230-6243
USA
Sony Electronics Inc.
HQ
1 Sony Drive Park Ridge, NJ 07656
Tel: +1-800-686-7669
Canada
Sony of Canada Ltd.
115 Gordon Baker Rd, Toronto, Ontario M2H 3R6
Tel: +1-416-499-1414 Fax: +1-416-497-1774
Europe
http://www.pro.sony-europe.com/ISP
Sony Broadcast & Professional
HQ
15, rue Floreal 75831 Paris Cedex 17, France
Tel: +33-1-55-90-35-11
Fax: +33-1-55-90-35-17
Germany
Hugo-Eckener-Str. 20, 50829 Koln
Tel: +49-221-5966-322
Fax: +49-221-5966-491
France
15, rue Floreal 75831 Paris Cedex 17
Tel: +33-1-55-90-41-62
Fax: +33-1-55-90-13-57
UK
The Heights, Brooklands, Weybridge, Surrey KT13 0XW
Tel: +44-1932-816-340
Nordic
Fax: +44-1932-817011
Per Albin Hanssons vag 20 S-214 32 Malmo Sweden
Tel: +46-40-190-800
Italy
Fax : +46-40-190-450
Via Galileo Galilei 40 I-20092 Cinisello Balsamo, Milano
Tel: +39-02-618-38-431
Fax : +39-02-618-38-402
© 1999 Sony Corporation. All rights reserved.
Reproduction in whole or in part without written permission is prohibited.
00B
Download from Www.Somanuals.com. All Manuals Search And Download.
|