3-294-108-11(1)
Portable
CD/DVD
Player
US
ES
Operating Instructions
Manual de instrucciones
DVP-FX820
©2008 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
12) Use only with the cart, stand,
tripod, bracket, or table
specified by the
On placement
• Place the player in a location
with adequate ventilation to
prevent heat build-up in the
player.
• Do not place the player in a
confined space such as a
Precautions
manufacturer, or sold with
the apparatus. When a cart is
used, use caution when
moving the cart/apparatus
combination to avoid injury
from tip-over.
Road safety
Do not use the monitor unit and
headphones while driving, cycling,
or operating any motorized
vehicle. Doing so may create a
traffic hazard and is illegal in some
areas. It can also be potentially
dangerous to play your headsets at
high volume while walking,
especially at pedestrian crossings.
You should exercise extreme
caution or discontinue use in
potentially hazardous situations.
bookshelf or similar unit.
• Do not cover the ventilation of
the player with newspapers,
tablecloths, curtains, etc. And do
not place the player on a soft
surface, such as a rug.
• Do not place the player in a
location near heat sources, or in a
place subject to direct sunlight,
excessive dust, sand, moisture,
rain, or mechanical shock, or in a
car with its windows closed.
• Do not place the player in an
inclined position. It is designed
to be operated in a horizontal
position only.
13) Unplug thisapparatus during
lightning storms or when
unused for long periods of
time.
14) Refer all servicing to
qualified service personnel.
Servicing is required when
the apparatus has been
damaged in any way, such as
power-supply cord or plug is
damaged, liquid has been
spilled or objects have fallen
into the apparatus, the
On safety
Should any solid object or liquid
fall into the cabinet, unplug the
player and have it checked by
qualified personnel before
operating it any further.
• Keep the player and discs away
from equipment with strong
magnet, such as microwave
ovens, or large loudspeakers.
• Do not place heavy objects on
the player.
On power sources
• The power requirements of this
unit are indicated on the AC
adaptor. Check that the unit’s
operating voltage is identical
with your local power supply.
• If you are not going to use the
player for a long time, be sure to
disconnect the player from the
wall outlet. To disconnect the
AC power cord, grasp the plug
itself; never pull the cord.
• Do not touch the AC power cord
or the AC adaptor with wet
hands. Doing so may cause
shock hazard.
apparatus has been exposed
to rain or moisture, does not
operate normally, or has
been dropped.
On operation
• If the player is brought directly
from a cold to a warm location,
or is placed in a very damp room,
moisture may condense on the
lenses inside the player. Should
this occur, the player may not
operate properly. In this case,
remove the disc and leave the
player turned on for about half an
hour until the moisture
RECYCLING LITHIUM-
ION BATTERIES
Lithium-Ion
batteries are
recyclable.
You can help
preserve our
evaporates.
• Use a commercially available
AC plug adaptor, if necessary,
depending on the design of the
wall outlet.
• Keep the lens on the player clean
and do not touch it. Touching the
lens may damage the lens and
cause the player to malfunction.
Leave the disc lid closed except
when you insert or remove discs.
environment by
returning your used rechargeable
batteries to the collection and
recycling location nearest you.
AC power cord
(supplied)
Wall
For more information regarding
recycling ofrechargeable batteries,
call toll free
outlet
On Liquid Crystal Display
1-800-822-8837, or visit
• Although manufactured with
high precision technology, the
LCD may occasionally display
dots of various colors. That is not
a malfunction.
AC plug adaptor
(not supplied)
Caution: Do not handle damaged
or leaking Lithium-Ion batteries.
• Do not wipe the LCD surface
with wet cloth. If water enters, a
malfunction may result.
• Do not place or drop any object
onto the LCD surface. Also, do
not apply pressure from hands or
elbows.
For the State of California,
USA only
Perchlorate Material – special
handling may apply, See
perchlorate
On temperature increases
Heat may build up inside the player
during charging or if it is being
used for a long time. This is not a
malfunction.
Perchlorate Material: Lithium
battery contains perchlorate.
• Do not damage the LCD surface
with a sharp edged tool.
• Do not close the LCD panel with
a pen, etc., on the disc lid.
,continued
3
Download from Www.Somanuals.com. All Manuals Search And Download.
• If the player is brought directly
from a cold to a warm location,
moisture may condense over the
LCD surface. In which case,
wipe out the moisture with tissue
paper, etc., before use.
However,moisturecondensation
will continue if the LCD surface
is cold. Wait until the surface
warms to room temperature.
On cleaning
Clean the cabinet, panel, and
controls with a soft cloth slightly
moistened with a mild detergent
solution. Do not use any type of
abrasive pad, scouring powder or
solvent such as alcohol or benzine.
Bottom of the player
B
On cleaning discs, disc/
lens cleaners
A
Battery pack
D
Do not use cleaning discs or disc/
lens cleaners (including wet or
spray types). These may cause
the apparatus to malfunction.
On AC adaptor
• Use the supplied AC adaptor for
this player, as other adaptors
may cause a malfunction.
• Do not disassemble or reverse-
engineer.
• Do not drop or apply shock.
• Do not confine the AC adaptor in
a closed place such as a
bookshelf or an AV cabinet.
• Do not connect the AC adaptor
to a traveler’s electric
transformer, which may generate
heat and cause a malfunction.
IMPORTANT NOTICE
Caution: This player is capable
of holding a still video image or
on-screen display image on your
television screen indefinitely. If
you leave the still video image or
on-screen display image
displayed on your TV for an
extended period of time you risk
permanent damage to your
television screen. Plasma
C
On car adaptor
• Use the supplied car adaptor for
this player, as other adaptors
may cause a malfunction.
• Do not dissemble or reverse-
engineer.
• Do not drop or apply shock.
• Do not touch the metal parts, as
it may cause a short and damage
the car adaptor, especially if
touched by other metal objects.
• Do not place the car adaptor in a
location near heat sources, or in a
place subject to direct sunlight or
mechanical shock, or in a car
with its windows closed.
On battery pack
• Certain countries may regulate
disposal of the battery used to
power this product. Please
consult with your local authority.
• Because of the battery’s limited
life, its capacity gradually
display panel televisions and
projection televisions are
susceptible to this.
If you have any questions or
problems concerning your player,
please consult your nearest Sony
dealer.
deteriorates over time and
repeated use. Purchase a new one
when the battery holds about
only half the normal period.
• The battery may not be charged
to its fullest capacity when
charged for the first time, or
when it has not been used for a
long time. The capacity recovers
after being charged and
On adjusting volume
Do not turn up the volume while
listening to a section with very low
level inputs or no audio signals. If
you do, the speakers may be
damaged when a peak level section
is played.
discharged several times.
• Do not leave the battery pack in
a car or direct sunlight, where
temperature goes up above
60 ºC (140°F).
On headphones
• Do not expose to water.
• Preventing hearing damage
Avoid using headphones at high
volumes. Hearing experts advice
against continuous, loud, and
extended play. If you experience a
ringing in your ears, reduce the
volume or discontinue use.
• Showing consideration for
others
Keep the volume at a moderate
level. This will allow you to hear
outside sounds and still be
considerate to the people around
you.
• Avoid short-circuiting the
battery connecting jacks (A)
located on the bottom of the
player and the connecting jacks
(C) on the battery pack with
metal objects such as a necklace.
• Make sure dust or sand does not
enter the battery connecting
jacks (A) and the guide holes (B)
located on the bottom of the
player, and the connecting jacks
(C) and the guide holes (D) on
the battery pack.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
About This Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Using the Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Using the LCD Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting the AC Adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using with the Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Playing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Searching for a Particular Point on a Disc (Search, Scan, Slow Play, Repeat
Connecting to another device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Index to Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
5
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Manual
• Instructions in this manual describe the controls on the remote. You can also use the
controls on the player if they have the same or similar names as those on the remote.
• “DVD” may be used as a general term for DVD VIDEOs, DVD+RWs/DVD+Rs (+VR
mode) and DVD-RWs/DVD-Rs (video mode).
• The meaning of the icons used in this manual is described below:
Icons
Meaning
Functions available for DVD VIDEOs and DVD+RWs/DVD+Rs in +VR
mode or DVD-RWs/DVD-Rs in video mode
Functions available for music CDs or CD-Rs/CD-RWs in music CD format
Functions available for DATA CDs (CD-ROMs/CD-Rs/CD-RWs
*
containing MP3 audio tracks, and JPEG image files)
Functions available for DATA DVDs (DVD-ROMs/DVD+RWs/DVD+Rs/
DVD-RWs/DVD-Rs containing MP3* audio tracks, and JPEG image files
)
*
MP3 (MPEG-1 Audio Layer III) is a standard format defined by ISO (International Organization for
Standardization)/IEC (International Electrotechnical Commission) MPEG which compresses audio
data.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Example of discs that the player
cannot play
The player cannot play the following discs:
• Blu-ray discs.
This Player Can Play the
Following Discs
• Discs recorded in AVCHD format.
• HD DVDs.
• DVD-RAMs.
Format of discs
DVD VIDEO
• CD-ROMs/CD-Rs/CD-RWs other than
those recorded in the formats listed on this
page.
• CD-ROMs recorded in PHOTO CD format.
• Data part of CD-Extras.
DVD-RW/-R
(finalized disc)
DVD+RW/+R
(finalized disc)
• DVD Audio discs.
• DATA DVDs that do not contain MP3
audio tracks or JPEG image files.
• HD layer on Super Audio CDs.
Also, the player cannot play the following
discs:
Music CD
• A DVD VIDEO with a different region
code.
• A disc recorded in a color system other than
NTSC, such as PAL or SECAM.
• A disc that has a non-standard shape (e.g.,
card, heart).
CD-RW/-R
• A disc with paper or stickers on it.
• A disc that has the adhesive of cellophane
tape or a sticker still left on it.
“DVD+RW,” “DVD-RW,” “DVD+R,”
“DVD-R,” “DVD VIDEO,” and “CD” logos
are trademarks.
Notes
Note about CDs/DVDs
The player can play CD-ROMs/CD-Rs/CD-
RWs recorded in the following formats:
– music CD format
– MP3 audio tracks and JPEG image files of
format conforming to ISO 9660* Level 1,
or its extended format, Joliet
• Notes about DVD+RWs/DVD+Rs, DVD-RWs/
DVD-Rs or CD-Rs/CD-RWs
Some DVD+RWs/DVD+Rs, DVD-RWs/DVD-
Rs, or CD-Rs/CD-RWs cannot be played on this
player due to the recording quality or physical
condition of the disc, or the characteristics of the
recording device and authoring software.
The disc will not play if it has not been
correctly finalized. For more information, refer
to the operating instructions for the recording
device. Note that some playback functions may
not work with some DVD+RWs/DVD+Rs, even
if they have been correctly finalized. In this case,
view the disc by normal playback. Also some
DATA CDs/DATA DVDs created in Packet
Write format or multiple sessions cannot be
played.
– KODAK Picture CD format
* A logical format of files and folders on CD-
ROMs, defined by ISO (International
Organization for Standardization).
The player can play DVD-ROMs/
DVD+RWs/DVD-RWs/DVD+Rs/DVD-Rs
recorded in the following format:
– MP3 audio tracks and JPEG image files of
format conforming to UDF (Universal Disk
Format).
• Notes about DVD+R DLs/DVD-R DLs
MP3 and JPEG files recorded on the second layer
of a DVD+R DL/-R DL (double layered) may not
be playable.
,continued
7
Download from Www.Somanuals.com. All Manuals Search And Download.
• Music discs encoded with copyright protection
technologies
Trademarks
• Manufactured under license from Dolby
Laboratories.
Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
• Manufactured under license under U.S.
Patent #: 5,451,942 & other U.S. and
worldwide patents issued & pending. DTS
and DTS Digital Out are registered
trademarks and the DTS logos and Symbol
are trademarks of DTS, Inc. ©1996-2007
DTS, Inc. All Rights Reserved.
This product is designed to playback discs that
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
copyright protection technologies are marketed
by some record companies. Please be aware that
among those discs, there are some that do not
conform to the CD standard and may not be
playable by this product.
• Note on DualDiscs
A DualDisc is a two sided disc product which
mates DVD recorded material on one side with
digital audio material on the other side.
However, since the audio material side does not
conform to the Compact Disc (CD) standard,
playback on this product is not guaranteed.
Region code
It is the system that is used to protect
copyrights. The region code is shown on the
DVD VIDEO packages according to the
region of sale. DVD VIDEOs labeled “ALL”
or “1” will play on this player.
ALL
Note on playback operations of
DVDs
Some playback operations of DVDs may be
intentionally set by software producers. Since
this player plays DVDs according to the disc
contents the software producers designed,
some playback features may not be available.
Also, refer to the instructions supplied with
the DVDs.
Copyrights
This product incorporates copyright
protection technology that is protected by
U.S. patents and other intellectual property
rights. Use of this copyright protection
technology must be authorized by
Macrovision, and is intended for home and
other limited viewing uses only unless
otherwise authorized by Macrovision.
Reverse engineering or disassembly is
prohibited.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Checking the Accessories
Check that you have the following items:
• Audio/video cord (mini plug × 2 y phono
plug × 3) (1)
• Car battery adaptor (1)
• Battery pack (NP-FX110) (1)
• Remote (with battery) (1)
• AC power cord (1)
• AC adaptor (1)
Using the Remote
When operating, point it at the remote sensor
on the player.
To replace the remote control battery
Insert a lithium battery CR2025 matching the 3 and # ends of the battery.
1
Pull out the battery holder (2) while
pressing the lock lever (1).
3
Insert the new battery in the battery
holder with the 3 side up and then push
the holder fully.
2
Remove the old battery.
Notes
• Do not expose the remote sensor
malfunction.
to direct sunlight or a lighting apparatus. Doing so may cause a
• No button operation can be made, when the battery drains. If the remote does not work at all, change the
battery and check the status.
WARNING
Battery may explode if mistreated.
Do not recharge, disassemble or dispose of in fire.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the LCD Panel
The LCD panel of the player can rotate a maximum of 180 degrees clockwise and still be used.
After rotation of the LCD panel, it can be folded down on the main body of the player and still
function.
Rotating the LCD panel
1 Place the player on a table or other flat stable surface.
2 Push the LCD panel up with your thumbs until it is open to the vertical position.
3 Slowly rotate the LCD panel 180 degrees in the direction indicated by the arrow
(clockwise).
Rotating and folding down the LCD panel
After rotating the LCD panel 180 degrees clockwise push the LCD panel down onto the main
body of the player. In this position the panel is facing up.
To return the LCD panel to its original position
Open the LCD panel to the vertical position and rotate the LCD panel counter-clockwise slowly.
Notes
• Do not rotate the LCD panel over 180 degrees. In addition, do not rotate in the opposite direction. Doing
so will break the LCD panel.
• If the LCD panel does not fully open, do not further rotate it. The LCD panel may become damaged.
• Return the LCD panel to its original positions after use. The LCD screen can be damaged by sudden shocks
or similar treatment.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the AC Adaptor
Connect the AC adaptor (supplied) in the order of 1 to 3 below.
To disconnect, follow the steps in reverse order.
PHONES
AUDIO
OPTICAL
OUT
VIDEO
LINE SELECT IN OUT
DC IN
9.5V
A
B
To DC IN 9.5 V jack
DC plug
2
AC Adaptor
(supplied)
AC power cord (supplied)
1
3
To a wall outlet
Note
Stop playback before disconnecting the AC power cord. Failure to do so may cause a malfunction.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using with the Battery Pack
When an AC power connection is not available, the player can be enjoyed with the battery pack
(supplied) installed.
Please charge the battery pack before using it.
Installing the battery pack
1 Aligning the battery pack with the lines on the player’s bottom, engage the hooks of
the battery pack in the holes on the bottom of the player.
2 Slide the battery pack in the direction of the arrow until it clicks into place.
Battery pack
Bottom of the player
To remove the battery pack
Push the release knob and slide the battery pack in the direction of the arrow.
Release knob
Notes
• Turn the player off before installing the battery pack.
• Do not remove the battery pack during playback.
• Do not touch the connecting points of the player and the battery pack. Doing so may cause a malfunction.
• Be careful not to drop the battery pack when installing and removing it.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the battery pack
2 Connect the AC adaptor to the player, and then connect the AC power cord into a wall
CHARGE indicator
DC IN 9.5 V jack
HOLD
PHONES
AUDIO
OPTICAL
OUT
VIDEO
DC IN
9.5V
LINE SELECT IN OUT
A
B
POWER CHARGE
Player
Battery pack
When charging begins, the CHARGE indicator turns on.
When charging ends, the CHARGE indicator turns off.
3 After charging is finished, disconnect the AC power cord from the wall outlet and
remove the AC adaptor.
To check the battery level
When the player is stopped, a battery indicator is displayed on the screen. Recharge the battery,
when
is displayed or the CHARGE indicator flashes.
Full
Exhausted
The battery indicator is not displayed when a DVD or JPEG file are being played. Stop the player
and check the battery level.
Charging time and maximum playing time
Charging time (with the player turned off) Playing time (with the display turned on)
Approx.
6 hours
Approx.
6 hours*
* This is the indication of the longest continuous playback on the following conditions.
– normal temperature (20°C (68°F))
– Headphone Use
– Set Backlight Adjustment to the Minimum
– Set “Digital Output” to “Off” in “Audio Setup.”
Battery condition may reduce operating time.
Notes
• The battery indicator does not appear on the screen when the AC adaptor is used or when inputting from
external sources.
• Charging times may differ from that indicated above due to conditions of use, environment, and other
factors. The recommended charge up surrounding temperature is in the 10-30°C (50-86°F) range.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using with the Car Battery Adaptor
Use the car battery adaptor (supplied) to supply power from the cigarette lighter socket to the
player. The adaptor is for a 12V car battery. Do not use it with a 24V car battery. The adaptor is
also for use with negatively grounded cars. Do not use it with cars grounded positively.
PHONES
AUDIO
OPTICAL
OUT
VIDEO
LINE SELECT IN OUT
DC IN
9.5V
A
B
To cigarette lighter socket
To DC IN 9.5V jack
Car battery adaptor (supplied)
z Hint
If the car adaptor interferes with car operation, use a commercial cigarette lighter extension cord.
Notes
• Do not use the car adaptor if it has been dropped or damaged.
• Arrange the cord so as not to interfere with the driver. Also, do not place the LCD panel where the driver
can watch.
• If the picture is not clear, keep the player away from the car battery adaptor.
• Use the car battery adaptor with the car engine running. If it is used with the car engine off, the car battery
may become unusable.
• If the cigarette lighter socket is dirty with ash, etc, a bad connection may cause the plug to heat up. Always
clean well before use.
• The car battery adaptor may heat up while charging or after a long period of use. That is not a malfunction.
After using the car battery adaptor
After turning the player off, disconnect the car battery adaptor from the cigarette lighter socket.
Notes
• Do not turn off the car engine while the player is turned on. Doing so stops the power supply and may cause
damage to the player.
• Disconnect the car battery adaptor after use. Since some cars supply power to the cigarette lighter socket
even when the engine is turned off, the car battery may discharge over time.
• When disconnecting the car battery adaptor, hold the plug to pull it out.
• When listening to the car radio, disconnect the car battery adaptor from the cigarette lighter socket to avoid
noise.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Press [/1 on the remote or slide
the [/1/HOLD switch of the player
to “[/1.”
Playing Discs
The player turns on and the power
indicator lights up in green.
Playing Discs
3
4
Press OPEN to open the disc lid.
Insert the disc to be played.
Push with the playback side down until it
clicks.
Depending on the DVD, some operations
may be different or restricted.
Refer to the operating instructions supplied
with the disc.
Connect the AC adaptor or install the battery
pack.
x
H
VOL
DISPLAY
MENU
RETURN
OPTIONS
POWER CHARGE
Playback side facing down
OPEN
5
6
Push the PUSH CLOSE on the
player to shut the disc lid.
PO
WER
CHARGE
D
L
O
H
Press H.
Playback starts.
OPEN \/1/HOLD
• Some discs may start playing
automatically after the disc lid is shut.
• Depending on the disc, a menu may
details.
• After all titles have been played, the
player will stop itself and the display
will return to the menu screen.
\/1
1
4
7
2
5
8
0
3
6
9
H
x
Notes
• If the disc is inserted with playback side up, a “No
Disc” or “Cannot play this disc.” message
appears.
• Discs created on DVD recorders must be correctly
finalized to play on this player. For more
information about finalizing, refer to the
operating instructions supplied with the DVD
recorder.
1
Open the player’s LCD panel.
Set the LINE SELECT switch on the
player’s right side to “OUT.”
• The disc may be still spinning when the disc lid is
opened. Wait until the spinning stops before
removing the disc.
,continued
15
Download from Www.Somanuals.com. All Manuals Search And Download.
• During operation, “ ” may appear on the screen.
This symbol indicates that a function explained in
this operating instruction is not available on the
current DVD VIDEO.
Additional playback operations
To stop playback
1
4
7
2
5
8
0
3
6
9
Press x.
Pressing H again will start playback from
the point you stopped (Resume Play). See
page 17 for details.
To play from the beginning, press x twice,
then press H.
.
X
>
x
To turn off the power
Press the remote’s \/1 button or slide the
player’s \/1/HOLD switch to “\/1.”
To
Operation
Press x
To avoid accidental button operation on
the player
Set the player’s \/1/HOLD switch to
“HOLD.” All the buttons on the player are
locked, while the button on the remote
remains operable.
Stop
Pause
Press X
Go to the next chapter, Press >
track, or scene in
continuous play mode
Go back to the
Press .
previous chapter,
track, or scene in
continuous play mode
To play DTS sound tracks on a DVD VIDEO
• The player’s speaker does not output DTS
sound. When you play DTS sound tracks on
a DVD VIDEO, connect the player to an
• If you connect the player to audio
Briefly fast forward
the current scene*
Press
playback.
during
* DVD VIDEOs only.
The above functions may not be used for some
scenes.
equipment such as an AV amplifier
(receiver) without a DTS decoder, do not set
A loud noise may come out from the
speakers, which may affect your ears or
cause speaker damage.
Notes
• A screen saver image appears when you leave the
player in pause or stop without operation for more
than 15 minutes. The image disappears when you
• The player turns off, 15 minutes after starting the
screen saver function (Auto Power Off).
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Resuming playback from the
point where you stopped the disc
(Resume Play)
Using the DVD’s menu
A DVD is divided into long sections of a
picture or a music feature called “titles.”
When you play a DVD containing several
titles, you can select the title you want using
the TOP MENU button.
When you play DVDs that allow you to select
items such as language for the sound and
subtitles, select these items using the MENU
button.
When you stop playback, the player
remembers the stop point and displays a
message on the screen. You can resume from
the same point by pressing H again. Resume
Play works even after the player is turned off,
as long as the disc lid is kept closed.
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
9
Number
buttons
MENU
TOP MENU
H
C/X/x/c
ENTER
x
1 While playing a disc, press x to stop
playback.
1 Press TOP MENU or MENU.
The disc’s menu appears on the screen.
The contents of the menu vary from disc
to disc.
A message appears.
2 Press H.
The player starts playback from the point
you stopped in step 1.
2 Press C/X/x/c or the number buttons
to select the item you want to play or
change.
z Hints
3 Press ENTER.
• To play from the beginning of the disc, press x
twice, then press H.
• When turning power on again after power off,
resume play starts automatically.
Note
Depending on the disc, you may not be able to use
C/c of the player for the disc menu. In this case, use
C/c on the remote.
Notes
• Depending on the stop point, Resume play may
not start from exactly the same point.
• The point where you stopped playing is cleared
when:
– you open the disc lid.
– you disconnect the battery pack and the AC
adaptor.
– you change the LINE SELECT switch setting.
,continued
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Changing the sound
• Depending on the disc, you may not be able to
change the audio format, even if it is recorded in
multiple audio formats.
• If “DTS” in “Audio Setup” is set to “Off”
appear on the screen even if the disc contains DTS
tracks.
When playing a DVD VIDEO recorded in
multiple audio formats (PCM, Dolby Digital,
or DTS), you can change the audio format. If
the DVD VIDEO is recorded with
multilingual tracks, you can also change the
language.
• When playing DTS sound tracks on a CD, you
cannot change the sound.
With CDs, you can select the sound from
either the right or left channel and listen to the
sound of the selected channel through both
the right and left speakers. For example, when
playing a disc containing a song with the
vocals on the right channel and the
instruments on the left channel, you can hear
the instruments from both speakers by
selecting the left channel.
1
4
7
2
5
8
0
3
6
9
AUDIO
1 Press AUDIO repeatedly to select the
desired audio signal.
The default setting is underlined.
◆ When playing a DVD VIDEO
Depending on the DVD VIDEO, the
choice of language varies.
When the same language is displayed two
or more times, the DVD VIDEO is
recorded in multiple audio formats.
◆ When playing a CD
• Stereo: the standard stereo sound
• Left: the sound of the left channel
(monaural)
• Right: the sound of the right channel
(monaural)
z Hints
• You can check of the current audio format (Dolby
Digital, DTS, PCM, etc.) by pressing AUDIO
repeatedly while playing a DVD VIDEO.
• You can switch the sound in the Playback Settings
Display while playing a DVD (page 20).
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying the subtitles
Changing the angles
If subtitles are recorded on the disc, you can
change the subtitles or turn them on and off
whenever you want while playing a DVD.
If various angles (multi-angles) for a scene
are recorded on the DVD VIDEO, “
”
appears on the screen. This means that you
can change the viewing angle.
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
9
SUBTITLE
ANGLE
1 Press SUBTITLE repeatedly to select a
setting.
1 Press ANGLE repeatedly to select an
angle number.
Depending on the disc, the choice of
language varies.
The scene changes to the selected angle.
To turn off the subtitles
Select “Subtitle Off” in step 1.
Notes
• Some DVD VIDEOs prohibit changing angles
even when multi-angles are recorded.
• You cannot change angles during Slow Play or
Scan Play.
z Hint
You can switch the subtitles in the Playback
• “
” (angle mark) does not appear when
“Angle Mark” in “General Setup” is set to “Off”
Notes
• Depending on the DVD VIDEO, you may not be
able to change the subtitles even if multilingual
subtitles are recorded on it. You also may not be
able to turn them off.
• While you play a disc with subtitles, the subtitle
may disappear when you press
.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
• T.Time
• C.Time
• Repeat
Using the Playback
Settings Display
• Time Disp.
3
Press X/x to select the setting,
and press ENTER.
To enter numbers, use the number
buttons or X/x.
While playing a DVD, you can check the
current playback settings on the screen. The
Playback Settings Display also allows you to
change sound, subtitle, and angle or search
for a title or track by inputting numbers.
Note
DISPLAY
Depending on the disc, you may not be able to set
some options.
1
4
7
2
5
8
0
3
6
9
Number
buttons
To turn off the display
Press DISPLAY or O RETURN.
C/X/x/c
ENTER
O
Searching for a title/chapter,
etc.
By entering the number or the time code, you
can search a DVD by title or chapter.
1
Press DISPLAY while playing a
DVD.
The Playback Settings Display appears.
Example: When playing a DVD VIDEO
1 Press X/x to select the search method
on the Playback Settings Display, and
press ENTER.
• Title
• Chapter
• T.Time*
Items
Current playback settings
• C.Time*
* You can search the title or chapter of a DVD
VIDEO by entering the time code.
2 Press the number buttons or X/x to
select the title or chapter number, and
press ENTER.
Menu
Title
02/07
Chapter
Audio
03/20
02 2CH DOLBY DIGITAL English
01 English
Subtitle
The player starts playback from the
selected number.
Title Elapsed 00:12:01
When you select “T.Time” or “C.Time” in
step 1, “00:00:00” will appear on the screen.
Enter the desired time code using the number
buttons, and press ENTER. Playback starts
from the entered time code. Elapsed or
remaining time appears on the footer of the
Playback Settings Display.
Battery status
Elapsed or remaining time
The corresponding icon for Play, Pause,
Search, or Slow Play is displayed in the
upper right corner of the screen.
2
Press X/x to select the desired
item and press ENTER.
z Hints
• Title
• You can use direct search without displaying the
• Chapter
• Audio
• Subtitle
• Angle
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Checking the playing time and
remaining time
• The displayed title/chapter number is the same as
the number recorded on the disc.
• Depending on the disc, you may not be able to use
the time code.
You can check the playing time and
remaining time of the current title or chapter.
1 Select “Time Disp.” on the Playback
Settings Display, and press ENTER.
Playing a DVD VIDEO repeatedly
(Repeat Play)
You can play all of the titles on a DVD
VIDEO, or a single title or chapter repeatedly.
1 Select “Repeat” on the Playback
Settings Display, and press ENTER.
Time Disp.
Title Elapsed
Title Remain
Chapter Elapsed
Chapter Remain
2 Press X/x to select the setting, and
Title Elapsed 00:12:48
press ENTER.
•
Chapter: repeats the current
chapter.
2 Press X/x to select the time
information setting, and press ENTER.
• Title Elapsed
•
•
Title: repeats the current title.
All: repeats all of the titles.
• Title Remain
• Chapter Elapsed
• Chapter Remain
To return to normal play
Select “Off” in step 2.
z Hint
z Hint
When playing a CD repeatedly, use MENU
time of a CD.
Note
Note
The default setting for “Time Disp.” is “Title
Elapsed.” After selecting an other option of “Time
Disp.” and exiting from the Playback Settings
Display, the “Title Elapsed” appears when the
Playback Settings Display is re-entered.
Depending on the disc, the Repeat function may not
be available.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Locating a point quickly by
playing a disc in fast forward or
fast reverse (Scan)
Searching for a
Particular Point on a
Disc (Search, Scan, Slow Play,
Repeat Play, Random Play)
Press m or M to fast reverse or fast
forward during playback. To return to normal
play, press H.
Each time you press m or M during scan,
the scan speed changes.
You can quickly locate a particular point on a
disc by monitoring the picture or playing back
slowly.
With each press the indication changes as
shown below.
DISPLAY
1
4
7
2
5
8
0
3
6
9
◆Playback direction
H t 1M t 2M t 3M
H
.
m
MENU
>
◆Opposite direction
M
H t 1m t 2m t 3m
The “3M”/“3m” playback speed is faster
than “2M”/“2m” and the “2M”/“2m”
playback speed is faster than “1M”/
“1m.”
Notes
• Depending on the disc, you may not be able to
perform some of the operations described.
• For DATA CDs/DATA DVDs, you can search for
a particular point only on an MP3 audio track.
z Hint
C/c on the player works the same as m/M on
the remote, and ENTER on the player works the
same as H on the remote. This function is
effective when you play back a DVD.
Locating a point quickly using
the ./> PREV (previous)/
NEXT buttons (Search)
Notes
• No sound is output during Scan play for a DVD.
• Scan speed differs depending on the disc type.
During playback, press > or . to go to
the next or previous chapter/track.
z Hint
When you know the chapter or track number, you
can search directly by entering these numbers using
the number buttons.
– While playing a DVD VIDEO, you can search
for a title or chapter using the number buttons
and ENTER. Press C/c to switch between title
and chapter.
– While playing a CD, you can search for a track
using the number buttons and ENTER.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching frame by frame
(Slow Play)
Playing CD repeatedly or in
random order (Repeat Play,
Random Play)
Press m or M when the player is in pause
mode. To return to normal speed, press H.
Each time you press m or M during Slow
Play, the playback speed changes. With each
press the indication changes as follows:
You can play all of the tracks on a disc, or a
single track repeatedly (Repeat Play).
Also, you can play the tracks in random order,
too (Random Play).
◆ Playback direction
1 Press MENU repeatedly during
playback to select the playback mode.
H t 1
t 2
t 3
•
•
Track: repeats the current track.
All: repeats all tracks on the disc.
• Random: plays all tracks on the disc
randomly.
◆ Opposite direction
H t 1
t 2
t 3
To return to normal play
Select “ Off” in step 1.
The “3 ”/“3 ” playback speed is slower
than “2 ”/“2 ” and the “2 ”/“2
playback speed is slower than “1 ”/“1 .”
”
z Hint
During Random Play, you can start playing other
randomly selected track by pressing >.
Note
Slow speed differs depending on the disc type.
Notes
• Depending on the disc, Random Play may not be
available.
• The same track may be repeated several times in
Random Play.
,continued
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the play information of
the disc
Playing MP3 Audio
Tracks or JPEG Image
Files
When playing a DVD
Press DISPLAY while playing a DVD, and
then use the Playback Settings Display
(page 20).
You can play MP3 audio tracks and JPEG
image files on DATA CDs (CD-ROMs/CD-
Rs/CD-RWs) or DATA DVDs (DVD-ROMs/
DVD+RWs/DVD+Rs/DVD-RWs/DVD-Rs).
For playable MP3 audio files and JPEG
When playing a CD
Press DISPLAY.
The playing track number/the total number of
tracks and the elapsed time of the current
track appear. Press DISPLAY repeatedly to
switch the time information as below.
• Track Elapsed
When you insert DATA CDs and DATA
DVDs, the list of albums appears.
• Track Remain
1
4
7
2
5
8
0
3
6
9
• Disc Elapsed
• Disc Remain
C/X/x/c
ENTER
MENU
Note
.
X
>
The player does not display “Disc Elapsed” or
“Disc Remain” on the screen when playing a CD in
Random Play.
H
x
Note
DATA CDs recorded in KODAK Picture CD
format automatically start playing when inserted.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing an MP3 audio track
Playing a JPEG image file
1 Press X/x to select an album on the
list, and press ENTER.
1 Press X/x to select an album on the
list, and press ENTER.
The list of tracks in the album appears.
The list of files in the album appears.
Dir:001
Dir:001
MY BEST
HAWAII
. .
. .
01 Stardust
02 Fire
03 Wing
DSC00001
DSC00002
DSC00003
DSC00004
DSC00005
• To go to the next or previous page,
press > or ..
• To go to the next or previous page,
press > or ..
• To return to the list of albums, press X/
• To return to the list of albums, press X/
x to select
and press ENTER.
x to select
and press ENTER.
2 Press X/x to select the track you want
2 Press X/x to select the image you
want to view, and press ENTER.
The selected image appears.
Example:
to play, and press ENTER.
Playback starts from the selected track.
To go to the next or previous MP3 audio
track
Press > or ..
To stop playback
Press x.
To pause playback
Press X.
To restart playback, press X again.
Notes
To display the list of thumbnails
Press MENU when a file is displayed on the
screen.
The image files in the album appear in 12
subscreens with the displayed file in the lead.
• The total albums and files the player can
recognize is about 648.
• The number of albums in a disc the player can
recognize is about 299.
1
5
9
2
3
4
6
7
8
10
11
12
• To move to the previous or next page of
the thumbnail list display, select
“bPrev” or “NextB” under the screen.
,continued
25
Download from Www.Somanuals.com. All Manuals Search And Download.
• To exit the list of thumbnails, press
MENU.
Enjoying JPEG Images as a Slide
Show
You can play JPEG image files on a DATA
CD or DATA DVD successively as a slide
show.
To go to the next or previous JPEG image
file
Press > or ..
To rotate a JPEG image
1
While displaying the file you want
to start a slideshow, press MENU.
The list of thumbnails appears.
Press C/X/x/c while viewing the image.
X: Reverses the image vertically (up and
down).
x: Reverses the image horizontally (left and
right).
c: Rotates the image 90 degrees clockwise.
C: Rotates the image 90 degrees counter
clockwise.
Note that the view also returns to normal if
you press ./> to go to the next or
previous image.
1
5
9
2
3
4
6
7
8
10
11
12
Example: when C is pressed once.
2
Press C/X/x/c to select “Slide
Show” at the bottom of the screen,
and press ENTER.
A slideshow starts from the displayed
file.
To pause slideshow
Press X. By pressing X again or H, you can
return to slideshow.
To stop viewing the JPEG image
Press x.
The display returns to the list of files.
To stop slideshow
Press x or MENU.
Notes
• Images may take time to appear due to the number
of recorded files or the size of the folders. If no
image appears after a few minutes, some of the
files included may be too large.
• Some JPEG files, especially progressive JPEG
files or JPEG files of 3,000,000 pixels or more,
may take longer to display than others.
• The player cannot play the JPEG image file that is
larger than 3078 (width) x 2048 (height) in
normal mode, or more than 3,300,000 pixels in
progressive JPEG. (Some progressive JPEG files
cannot be displayed even if the size is within this
specified capacity.)
• The total albums and files the player can
recognize is about 648.
• The number of albums in a disc the player can
recognize is about 299.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
To turn off the Option Menu
Press OPTIONS or O RETURN.
Adjusting the Picture
Size and Quality
z Hints
• The screen turns off automatically when the LCD
panel is closed.
• You can see the settings for the display in
You can adjust the picture displayed on the
when outputting the video signal to TV, etc.
Note
Depending on the disc, the screen size you can
select differs.
1
4
7
2
5
8
0
3
6
9
C/X/x/c
ENTER
OPTIONS
1
2
Press OPTIONS.
The Option Menu appears.
Press X/x to select “LCD Mode”
and press ENTER.
The items for “LCD Mode” appear.
3
Press X/x to select items and
press ENTER.
• LCD Aspect: Change the picture size.
Select “Normal” or “Full” by pressing
*.
• Backlight: Adjust the brightness of the
LCD screen by pressing C c.
• Contrast: Adjust the difference between
light and dark areas by pressing C c.
• Hue: Adjust the red and green color
balance by pressing C c.
• Color: Adjust the richness of colors by
pressing C c.
X/
x
/
/
/
/
• Default: Returns all settings to the
factory defaults.
* In “Normal,” the pictures are displayed in the
original configuration, retaining the aspect ratio.
For example, a 4:3 picture will have black bands
on both sides, and the letterbox pictures recorded
either in 16:9 or 4:3 will have black bands on all
sides. In “Full,” a 16:9 picture will be adjusted to
fill the entire screen.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Press X/x to select the desired
Setup item from: “General
Setup,” “Audio Setup,”
Settings and Adjustments
“Language Setup,” or “Parental
Control,” then press ENTER.
Using the Setup Display
By using the Setup Display, you can make
various adjustments to items such as picture
and sound. You can also set a language for the
subtitles and the Setup Display, among other
things.
The Setup item is selected.
Example: “General Setup”
Selected item
General Setup
TV Display
Angle Mark
Screen Saver
Default
16 : 9
On
For details on each Setup Display item, see
On
Note
Playback settings stored in the disc take priority
over the Setup Display settings, and not all of the
functions described may work.
ENTER
RETURN
Cancel:
Select:
Setup items
4
5
Press X/x to select an item, then
press ENTER.
The settings for the selected item appear.
Example: “TV Display”
1
4
7
2
5
8
0
3
6
9
C/X/x/c
ENTER
O
OPTIONS
General Setup
TV Display
Angle Mark
Screen Saver
Default
4 : 3 Pan Scan
4 : 3 Letter Box
16 : 9
x
1
2
Press OPTIONS when the player is
in stop mode.
ENTER
RETURN
Cancel:
Select:
Settings
The Option Menu appears.
The Setup Display does not appear if
Resume Play is activated. Cancel the
Resume Play status first by pressing x
twice, and the press OPTIONS.
Press X/x to select a setting, then
press ENTER.
The setting is selected and setup is
complete.
Example: “4:3 Pan Scan”
Press X/x to select “Setup,” then
press ENTER.
Selected setting
The items for “Setup” appear.
General Setup
General Setup
TV Display
Angle Mark
Screen Saver
Default
4 : 3 Pan Scan
TV Display
Angle Mark
Screen Saver
Default
16 : 9
On
On
On
On
ENTER
RETURN
Cancel:
Select:
ENTER
RETURN
Cancel:
Select:
28
Download from Www.Somanuals.com. All Manuals Search And Download.
To turn off the Setup Display
Press OPTIONS or O RETURN twice.
Settings for the Display
(General Setup)
Choose playback display options and settings
according to the TV to be connected.
Select “General Setup” in the Setup Display.
To use the display, see “Using the Setup
The default settings are underlined.
General Setup
TV Display
Angle Mark
Screen Saver
Default
16 : 9
On
On
ENTER
RETURN
Cancel:
Select:
◆ TV Display (DVD only)
Selects the aspect ratio of the connected TV
(4:3 standard or wide).
4:3
Pan Scan
Select this when you connect a
4:3 screen TV. Automatically
displays a wide picture on the
entire screen and cuts off the
portions that do not fit.
4:3
Letter Box
Select this when you connect a
4:3 screen TV. Displays a wide
picture with bands on the upper
and lower portions of the
screen.
16:9
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
4:3 Pan Scan
4:3 Letter Box
16:9
,continued
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Settings for the Sound
(Audio Setup)
Depending on the DVD, “4:3 Letter Box” may be
selected automatically instead of “4:3 Pan Scan” or
vice versa.
◆ Angle Mark
Displays the angle mark when you can change the
viewing angles during playback of DVDs recorded
with multi-angles.
“Audio Setup” allows you to set the sound
according to the playback and connection
conditions.
Select “Audio Setup” in the Setup Display.
To use the display, see “Using the Setup
On
Off
Display the angle mark.
Hide the angle mark.
The default settings are underlined.
◆ Screen Saver
Audio Setup
The screen saver image appears when you
leave the player in pause or stop mode for 15
minutes. The screen saver will help prevent
your display device from becoming damaged
(ghosting). Press H to turn off the screen
saver.
Audio DRC
TV Mode
Off
Digital Output
ENTER
RETURN
Cancel:
Select:
On
Activates the screen saver
function.
◆Audio DRC (Dynamic Range Control)
(DVD only)
Makes the sound clear when the volume is
turned down when playing a DVD that
conforms to “Audio DRC.”
This function affects the output from the
following jacks:
Off
Deactivates the screen saver
function.
◆ Default
Each function returns to its original factory
settings. Note that all of your settings will be
lost.
– AUDIO jack
– OPTICAL OUT jack only when “Dolby
Digital” is set to “Downmix PCM” (page
31).
Standard
TV Mode
Normally, select this position.
Makes low sounds clear even if
you turn the volume down.
Wide Range Gives you the feeling of being
at a live performance.
◆Digital Output
Selects if audio signals are output via the
OPTICAL OUT jack.
On
Normally select this position.
When you select “On,” see
for further settings.
Off
The influence of the digital circuit
upon the analog circuit is
minimal.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the digital output signal
Setting the Display or
Sound Track Language
(Language Setup)
Switches the method of outputting audio
signals when you connect an audio equipment
such as an AV amplifier (receiver) with the
OPTICAL OUT jack.
After setting “Digital Output” to “On,” select
“Dolby Digital” and “DTS.”
“Language Setup” allows you to set various
languages for the on-screen display or sound
track.
If you connect a component that is
incompatible with the selected audio signal, a
loud noise (or no sound) may be heard from
the speakers, damaging your ears or speakers.
Select “Language Setup” in the Setup
Display. To use the display, see “Using the
◆ Dolby Digital (DVD only)
Selects the type of Dolby Digital signal.
Language Setup
OSD
English
English
English
English
Disc Menu
Subtitle
Audio
Downmix
PCM
Select this when the player is
connected to an audio
component without a built-in
Dolby Digital decoder.
ENTER
RETURN
Cancel:
Select:
Dolby Digital Select this when the player is
connected to an audio
component with a built-in
Dolby Digital decoder.
◆ OSD (On-Screen Display)
Switches the display language on the screen.
◆ Disc Menu (DVD VIDEO only)
◆ DTS
Switches the language for the disc’s menu.
When you select “Original,” the language
given priority in the disc is selected.
Selects whether or not to output DTS signals.
On
Select this when the player is
connected to an audio
component with a built-in DTS
decoder.
◆ Subtitle (DVD VIDEO only)
Switches the subtitle language.
When you select “Off,” no subtitle is
displayed.
Off
Select this when the player is
connected to an audio
component without a built-in
DTS decoder.
◆ Audio (DVD VIDEO only)
Switches the language of the sound track.
When you select “Original,” the language
given priority in the disc is selected.
Note
If you select a language in “Disc Menu,” “Subtitle,”
or “Audio” that is not recorded on the DVD
VIDEO, one of the recorded languages will be
automatically selected.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the password
Parental Control
1 Press X/x to select “Password” in the
Parental Control setting display, and
press ENTER.
Settings (Parental Control)
Playback of some DVD VIDEOs can be
limited, by the parental control function.
2 Select “Change,” and press ENTER.
The display for entering the password
appears.
Select “Parental Control” in the Setup
Display. To use the display, see “Using the
3 Enter your current 6-digit password in
the “Old Password” box.
Parental Control
Password
4 Enter your new 6-digit password in the
“New Password” box.
Parental Control
5 Enter your new 6-digit password once
again in the “Verify Password” box,
then press ENTER to confirm.
ENTER
RETURN
Cancel:
Select:
◆ Password
If you make a mistake entering your
password
Press CLEAR, or press C to return one by one
before pressing ENTER in step 5, and then re-
enter the password.
Enter or change a password. By setting a
password, you can limit playback of a DVD
that has the parental control function. When
the Password option is first accessed, enter a
new password (you do not need to enter the
old password.).
Setting the parental control
(limited playback)
1 PressX/xto select “Parental Control”
in the Parental Control setting display,
and press ENTER.
◆ Parental Control
The lower the setting value, the stricter the
limitation.
To set the parental control, you need the
selected password in “Password,” therefore
first set the password in the set up.
The display for setting the playback
limitation level appears.
Parental Control
Password
2
3
4
5
6
7
8
Parental Control
Adult
ENTER
RETURN
Cancel:
Select:
32
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Press X/xto select the limitation level
(1-8), and press ENTER.
The lower the value, the stricter the
limitation.
The display for entering the password
appears.
Parental Control
Password
OK
ENTER
Enter password, then press
.
3 Enter or re-enter your 6-digit password
using the number buttons, then press
ENTER.
Parental Control setting is complete.
To play a disc for which Parental Control is
set
1
Insert the disc and press H.
The display for entering your password
appears.
2
Enter your 6-digit password using the
number buttons, then press ENTER.
The player starts playback.
If you forget your password
Remove the disc and repeat the steps outlined in
“136900” in the “Old Password” box, and then enter
your new 6-digit password in the “New Password”
box and “Verify Password” box.
Notes
• When you play discs which do not have the
Parental Control function, playback cannot be
limited on this player.
• Depending on the disc, you may be asked to
change the parental control level while playing
the disc. In this case, enter your password, then
change the level. If the Resume Play mode is
cancelled, the level returns to the previous level.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Hookups
Connecting to another device
To switch LINE SELECT (IN/OUT) switch
LINE SELECT IN: Input images or audio from an exterior device. The “Line in” message will
be displayed on the LCD screen until the signal from the exterior device
is received.
LINE SELECT OUT:Sends the playback signal from this player to a TV.
Notes
• Plug cords securely to prevent noise.
• Refer to the instructions supplied with the components to be connected.
• You cannot connect this player to a TV that does not have a video input jack.
• Be sure to disconnect the AC power cord of each component before connecting.
• Connect the player to the TV directly. Image quality may suffer when the video output from the player is
passed through a video deck on to a TV.
Connecting to TV monitor
TV or monitor with audio/
video intput jacks
PHONES
AUDIO
OPTICAL
OUT
VIDEO
LINE SELECT IN OUT
DC IN
9.5V
A
B
To AUDIO/VIDEO
Audio/video cord (supplied)
To send the playback signal to a TV or a monitor
1
Set the LINE SELECT switch on the player’s right side to “OUT.”
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an AV amplifier (receiver)
Example 1
Stereo amplifier
PHONES
AUDIO
OPTICAL
OUT
VIDEO
LINE SELECT IN OUT
DC IN
9.5V
A
B
To AUDIO
To AUDIO input
Audio/video cord (supplied)
To send analog audio signal to an AV amplifier (receiver)
Set the LINE SELECT switch on the player’s right side to “OUT.”
1
Example 2
Amplifier with Dolby Digital
or DTS decoder
PHONES
AUDIO
OPTICAL
OUT
VIDEO
LINE SELECT IN OUT
DC IN
9.5V
A
B
To OPTICAL OUT
To AUDIO input
Optical digital cord (not supplied)
To send digital audio signal to an AV amplifier (receiver)
1
2
Set the LINE SELECT switch on the player’s right side to “OUT.”
,continued
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to Video Player or Camcorder
Video player or camcorder
PHONES
AUDIO
OPTICAL
OUT
VIDEO
LINE SELECT IN OUT
DC IN
9.5V
A
B
To AUDIO/VIDEO output
To AUDIO/VIDEO
Audio/video cord (supplied)
To receive the playback signal from a Video Player or Camcorder
Set the LINE SELECT switch on the player’s right side to “IN.”
1
Note
Set the LINE SELECT switch to “OUT” after use. You cannot play back on the player if the switch is set to
“IN.”
36
Download from Www.Somanuals.com. All Manuals Search And Download.
The picture does not fill the screen, even
though the aspect ratio is set in “TV
Display” under “General Setup.”
, The aspect ratio of the disc is fixed on your
DVD.
Additional Information
Troubleshooting
If you experience any of the following
difficulties while using the player, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.
The black points appear and the red, blue,
green points remain on the LCD.
, This is a structural property of the LCD and
not mulfunction.
Sound
There is no sound.
, The player is in pause mode or in Slow Play
mode.
, The player is in fast forward or fast reverse
mode.
Power
The power is not turned on.
, Check that the AC power cord is connected
securely.
, When using with the battery pack, check
that the battery pack is sufficiently charged.
, Re-connect the connecting cord securely.
, The connecting cord is damaged.
, The player is connected to the wrong input
jack on the amplifier (receiver) (page 35).
, The amplifier (receiver) input is not
correctly set.
, If the audio signal does not come through
the OPTICAL OUT jack, check the audio
settings (page 31).
Picture
There is no picture/picture noise appears.
, The disc is dirty or flawed.
, The brightness is set at minimum. Set the
, When you play discs, set the LINE SELECT
switch to “OUT.” When you send the
playback signal to other device, set the
LINE SELECT switch to “OUT.” When
you receive the playback signal from other
device, set the LINE SELECT switch to
The sound volume is low.
, The sound volume is low on some DVDs.
The sound volume may improve if you set
“Audio DRC” in “Audio Setup” to “TV
Mode” (page 30).
, Re-connect the connecting cord securely.
, The connecting cords are damaged.
and switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
Operation
The remote does not function.
, The batteries in the remote are weak.
, There are obstacles between the remote and
the player.
, The distance between the remote and the
player is too far.
, The remote is not pointed at the remote
sensor on the player.
, Direct sunlight or strong illumination is
striking the remote sensor.
, The player is connected to the
COMPONENT VIDEO IN (Y, PB, PR) jacks
of high-vision TV.
, If the picture output from your player goes
through your video deck to get to your TV
or if you are connected to a combination
TV/VIDEO player, the copy-protection
signal applied to some DVD programmes
could affect picture quality.
,continued
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Nothing happens when buttons are
pressed.
The subtitle language cannot be changed
or turned off.
, Try using the DVD’s menu instead of the
direct selection button on the remote
,
The player’s
\/1
/HOLD switch is set on
, Multilingual subtitles are not recorded on
the DVD being played.
, The DVD prohibits the changing of
subtitles.
The disc does not play.
, The disc is turned over.
Insert the disc with the playback side facing
down.
, The disc is not set correctly.
, The player cannot play certain discs
(page 7).
The angles cannot be changed.
, Try using the DVD’s menu instead of the
direct selection button on the remote
, The region code on the DVD does not match
, Moisture has condensed inside the player
, The player cannot play a recorded disc that
, Multi-angles are not recorded on the DVD
being played.
(
).
, The angle can only be changed when the
(
).
“
” indicator lights up on the screen
, Parental Control has been set. Change the
setting.
, The DVD prohibits changing of the angles.
, The LINE SELECT switch on the player’s
right side is set to “IN.”
The MP3 audio track cannot be played
(page 39).
, The DATA CD is not recorded in an MP3
format that conforms to ISO 9660 Level 1 or
Joliet.
The player starts playing the disc
automatically.
, The disc features an auto playback function.
, The DATA DVD is not recorded in MP3
format that conforms to UDF (Universal
Disk Format).
, The MP3 audio track does not have the
extension “.MP3.”
, The data is not formatted in MP3 even
though it has the extension “.MP3.”
, The data is not MPEG-1 Audio Layer III
data.
, The player cannot play audio tracks in
mp3PRO format.
Playback stops automatically.
, While playing discs with an auto pause
signal, the player stops playback at the auto
pause signal.
Some functions such as Stop, Search,
Scan, Slow Play, Repeat Play, or Random
Play cannot be performed.
, Depending on the disc, you may not be able
to do some of the operations above. Refer to
the operating instructions supplied with the
disc.
, The MP3 audio track is damaged.
The language for the sound track cannot
be changed.
, Try using the DVD’s menu instead of the
direct selection button on the remote
, Multilingual tracks are not recorded on the
DVD being played.
, The DVD prohibits the changing of the
language for the sound track.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
The JPEG image file cannot be played
(page 39).
, The DATA CD is not recorded in a JPEG
format that conforms to ISO 9660 Level 1 or
Joliet.
About MP3 Audio Tracks
and JPEG Image Files
MP3 is audio compression technology that
satisfies the ISO/IEC MPEG regulations.
JPEG is image compression technology.
You can play DATA CDs/DATA DVDs that
contain MP3 audio tracks or JPEG image
files.
, The DATA DVD is not recorded in JPEG
format that conforms to UDF (Universal
Disk Format).
, The JPEG image file does not have the
extension “.JPG.”
, The data is not formatted in JPEG even
though it has the extension “.JPG.”
, The JPEG image file format does not
conform to DCF (page 39).
, The image is larger than 3078 (width) ×
2048 (height) in normal mode, or more than
3,300,000 pixels in progressive JPEG.
(Some progressive JPEG files cannot be
displayed even if the file size is within this
specified capacity.)
DATA CDs/DATA DVDs that the
player can play
You can play back DATA CDs (CD-ROMs/
CD-Rs/CD-RWs) or DATA DVDs (DVD-
ROMs/DVD+RWs/DVD+Rs/DVD-RWs/
DVD-Rs) recorded in MP3 (MPEG-1 Audio
Layer III) and JPEG format.
, The JPEG image file is damaged.
However, this player only plays DATA CDs
whose logical format is ISO 9660 Level 1 or
Joliet, and DATA DVDs of Universal Disk
Format (UDF).
Refer to the instructions supplied with the
disc drives and the recording software (not
supplied) for details on the recording format.
The album/track/file names are not
displayed correctly.
, The player can only display numbers and
alphabet. Other characters are displayed as
“ .”
*
The disc does not start playing from the
beginning.
Note
The player may not be able to play some DATA
CDs/DATA DVDs created in the Packet Write
format or multiple sessions.
, Repeat Play or Random Play is selected
MP3 audio track or JPEG image
file that the player can play
The player can play the following tracks and
files:
• MP3 audio tracks with the extension
“.MP3.”
The player does not operate properly.
, When static electricity, etc., causes the
player to operate abnormally, unplug the
player.
• JPEG image files with the extension
“.JPG.”
• JPEG image files that conform to the DCF*
image file format.
* “Design rule for Camera File system”: Image
standards for digital cameras regulated by JEITA
(Japan Electronics and Information Technology
Industries Association).
,continued
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Notes About the Discs
• Change the extension to “.JPG,” for files with
“.JPE” or “.JPEG” extension.
• The player will play any data with the extension
“.MP3” or “.JPG,” even if they are not in MP3 or
JPEG format. Playing this data may generate a
loud noise which could damage your speaker
system.
• To keep the disc clean, handle the disc by its
edge. Do not touch the surface.
• The player does not conform to audio tracks in
mp3PRO format.
• Some JPEG files cannot be played.
• The player can display a file or track name up to
14 characters. Any characters after the 14th
character do not appear on the screen.
• Characters that are not displayable appear as “ .”
*
• Depending on the disc, a file or track name that is
not displayable appears as “ .”
*
• You cannot display correctly the CD-R/CD-RW
file names written in the UDF file system.
• When playing an MP3 audio track recorded in
VBR mode, you cannot display the bit rate
correctly.
• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave it
in a car parked in direct sunlight as the
temperature may rise considerably inside
the car.
About playback order of albums,
tracks, and files
Tracks and files within an album play in the
order of the recorded media (CD-R etc.).
• After playing, store the disc in its case.
• Clean the disc with a cleaning cloth. Wipe
the disc from the centre out.
z Hint
Since a disc with many trees takes longer to start
playback, it is recommended that you create albums
with no more than two trees.
• Do not use solvents such as benzine,
thinner, disc/lens cleaners, or anti-static
spray intended for vinyl LPs.
• If you have printed the disc’s label, dry the
label before playing.
Notes
• The player can recognize up to 299 albums
(including albums that do not contain MP3 audio
tracks and JPEG image files). The player will not
play any albums beyond the 299th album.
• The player can recognize a combined total of up
to 648 files, tracks, and albums. The player will
not play beyond the 648th file, track or album.
• Depending on the writing condition of the disc,
the total number of files, tracks, and albums
recognizable may be fewer than 648.
• The Album List displays only the currently
playing album name. Any album located on the
upper layer is displayed as “\..\.”
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
System
Laser: Semiconductor laser
Signal format system: NTSC
Liquid Crystal Display
Panel size: 8 inches wide (diagonal)
Driving system: TFT active matrix
Resolution: 800 × 480 (effective pixel rate:
more than 99.99%)
Audio characteristics
Frequency response: DVD VIDEO (PCM
48 kHz): 20 Hz to 22 kHz/
CD: 20 Hz to 20 kHz
Harmonic distortion: 0.01 %
Dynamic range: DVD VIDEO: 90 dB/
CD: 90 dB
General
Power requirements:
DC 9.5 V (AC Adaptor/Car battery
adaptor)
DC 7.4 V (Battery pack)
Power consumption (DVD VIDEO
Playback):
Wow and flutter: Less than detected value
( 0.001% W PEAK)
23 W (when used with a battery pack)
8.5 W (when used without a battery pack,
with a headphone)
Inputs/Outputs
VIDEO (video input/output):
Minijack (1)
Output 1.0 Vp-p/75 ohms
AUDIO (audio input/output)/OPTICAL
OUT (optical output):
Stereo minijack/optical minijack
combined (1)
Dimensions (approx.):
7
3
225.4 × 33.5 × 164.9 mm (8 /8 × 1 /8 ×
1
6 /2 inches) (width/height/depth) incl.
projecting parts
Mass (approx.): 920 g (2.03 lbs)
Operating temperature: 5 °C to 35 °C
(41°F to 95°F)
Operating humidity: 25 % to 80 %
AC Adaptor: 100-240 V AC, 50/60 Hz
Car Battery Adaptor: 12 V DC
Output 2.0 Vrms/47 kilohms
Recommended load impedance over
47 kilohms
PHONES (headphones) A/B:
Stereo minijack (2)
Supplied accessories
Specifications and design are subject to
change without notice.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Index to Parts and Controls
For more information, see the pages indicated in parentheses.
Upper view
t
VOL
DISPLAY
MENU
RETURN
OPTIONS
OPEN
PUSH OSE
A VOL (sound volume) –/+ button*
K
* Use the tactile dot as a reference when operating
the player. The H (play) and VOL + buttons
have a tactile dot.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Front view
POWER CHARGE
C
Right view
HOLD
PHONES
AUDIO
OPTICAL
OUT
VIDEO
LINE SELECT IN OUT
DC IN
9.5V
A
B
B PHONES (headphone) jack A, B
C AUDIO (input/output) jack/OPTICAL
F DC IN 9.5V (AC adaptor input) jack
(11)
,continued
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
1
4
7
2
5
8
0
3
6
9
F ./> PREV (previous)/NEXT
buttons (16)
H
K VOL (sound volume) +/– buttons
* Use the tactile dot as a reference when operating
the player. The number 5 button has a tactile dot.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Numerics
16:9 29
O
OPTICAL OUT 30
OSD (On-Screen Display) 31
R
A
Resume Play 17
Album 40
Angle 19
Audio DRC 30
Audio Setup 30
S
Scan 22
B
Search 22
Batteries
Setup 28
C
Connecting 34
D
T
Disc Menu
Troubleshooting 37
TV Display 29
U
Usable discs
DVD+RW
DVD-RW
F
Fast forward 22
G
General Setup 29
H
Handling discs 40
J
L
Language Setup 31
M
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Índice
Este manual explica los preparativos y el funcionamiento básico del reproductor portátil de CD/
DVD.
Para obtener más información, consulte el Manual de Instrucciones en inglés.
Control de accesorios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Uso del Panel LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Conexión del Adaptador de CA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Uso de la Batería . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ES
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparativos
Control de accesorios
Compruebe que dispone de los siguientes elementos:
• Cable de audio/video (clavija mini × 2 y
clavija fono × 3) (1)
• Adaptador para batería de automóvil (1)
• Batería (NP-FX110) (1)
• Cable de alimentación de CA (1)
• Adaptador de CA (1)
• Control remoto (con batería) (1)
Uso del control remoto
Cuanto utilice el control remoto, oriéntelo hacia el sensor remoto
del reproductor.
ES
Para reemplazar la batería del control remoto
Inserte una batería de litio CR2025 haciendo coincidir sus extremos 3 y #.
1
Retire el compartimiento de la batería
(2) mientras presiona la palanca de
bloqueo (1).
3
Introduzca la batería nueva en el
compartimiento de batería con el lado 3
hacia arriba y luego presione totalmente
el compartimiento.
2
Retire la batería usada.
Notas
• No exponga el sensor remoto
a la luz directa del sol o de aparatos de iluminación. Hacerlo podría
ocasionar un mal funcionamiento.
• Cuando la batería se agota no es posible realizar operaciones con los botones. Si el control remoto no
funciona, cambie la batería y controle el estado.
ADVERTENCIA
La batería puede explotar si no se maneja correctamente.
No la recargue, ni la desarme, ni la arroje al fuego.
PRECAUCIÓN
Hay peligro de explosión si la batería no se reemplaza correctamente.
Reemplácela solamente con el mismo tipo de batería o uno equivalente.
ES
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Uso del Panel LCD
El panel LCD del reproductor puede rotar un máximo de 180 grados en sentido horario y
continuar utilizándose. Luego de rotar el panel LCD, este puede plegarse sobre la carcasa del
reproductor y continuar funcionando.
Rotación del panel LCD
1 Coloque el reproductor sobre una mesa u otra superficie plana y estable.
2 Empuje el panel LCD hacia arriba con los pulgares hasta que esté abierto en posición
vertical.
3 Rote lentamente el panel LCD 180 grados en la dirección que indica la flecha
(sentido horario).
Rotación y plegado del panel LCD
Luego de rotar el panel LCD 180 grados en sentido horario, empuje el panel LCD hacia abajo
sobre la carcasa del reproductor. En esta posición, el panel queda mirando hacia arriba.
Para volver a colocar el panel LCD en su posición original
Abra el panel LCD en la posición vertical y rótelo lentamente en sentido antihorario.
Notas
• No rote el panel LCD más de 180 grados. Además, no lo rote en la dirección contraria. Si lo hace, el panel
LCD se romperá.
• Si el panel LCD no se abre totalmente, no lo rote más. El panel LCD podría romperse.
• Luego de utilizar el panel LCD, colóquelo nuevamente en la posición original. La pantalla LCD puede
dañarse por sacudidas violentas o un tratamiento similar.
ES
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Conexión del Adaptador de CA
Conecte el adaptador de CA (suministrado) en el orden de 1 a 3 como se muestra debajo.
Para desconectarlo, siga los pasos en el orden inverso.
PHONES
AUDIO
OPTICAL
OUT
VIDEO
LINE SELECT IN OUT
DC IN
9.5V
A
B
A conector de DC IN 9.5 V
Conector de
CD
2
Adaptador de CA
(suministrado)
Cable de alimentación de
CA (suministrado)
1
3
A un tomacorriente
de pared
Nota
Detenga la reproducción antes de desconectar el cable de alimentación de CA. No hacerlo podría ocasionar
un mal funcionamiento.
ES
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Uso de la Batería
Cuando no hay disponible una conexión a la corriente CA, el reproductor puede disfrutarse
instalando la batería (suministrada).
Por favor cargue la batería antes de utilizarla.
Instalación de la batería
1 Alineando la batería con las líneas de la base del reproductor, ajuste los ganchos de
la batería en los huecos de la base del reproductor.
2 Deslice la batería en la dirección que indica la flecha hasta que se ajuste con un clic.
Batería
Base del reproductor
Para retirar la batería
Empuje la lengüeta de liberación y deslice la batería en la dirección que indica la flecha.
Lengüeta de liberación
Notas
• Apague el reproductor antes de instalar la batería.
• No retire la batería durante la reproducción.
• No toque los puntos de conexión del reproductor y la batería. Hacerlo podría ocasionar un mal
funcionamiento.
• Tenga cuidado de no dejar caer la batería cuando la instale o retire.
ES
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Carga de la batería
2 Conecte el adaptador de CA al reproductor y luego conecte el cable de alimentación
de CA a un tomacorriente de pared (página 5) .
Indicador de carga CHARGE
Clavija de DC IN 9.5 V
HOLD
PHONES
AUDIO
OPTICAL
OUT
VIDEO
DC IN
9.5V
LINE SELECT IN OUT
A
B
POWER CHARGE
Reproductor
Batería
Cuando comienza el proceso de carga, el indicador CHARGE se enciende.
Cuando termina el proceso de carga, el indicador CHARGE se apaga.
3 Cuando finalice el proceso de carga, desconecte el cable de alimentación de CA del
tomacorriente de pared y retire el adaptador de CA.
Para controlar el nivel de batería
Cuando el reproductor está detenido, un indicador de batería aparece en la pantalla. Recargue la
batería cuando aparezca
o el indicador CHARGE destelle.
Completo
Agotado
El indicador de batería no se muestra mientras se reproduce un DVD o archivo JPEG. Detenga
el reproductor y compruebe el nivel de batería.
Tiempo de carga y tiempo máximo de reproducción
Tiempo de carga
(con el reproductor apagado)
Tiempo de reproducción
(con la visualización encendida)
Aproximadamente
6 horas
Aproximadamente
6 horas*
* Esta es la indicación de la reproducción continua más prolongada en las siguientes condiciones.
– temperatura normal (20ºC (68ºF))
– Uso de auriculares
– Configure el ajuste de luz de fondo al mínimo
– Configure el ajuste de “Salida Digital” en “No” en “Ajuste Audio”.
La condición de la batería puede reducir el tiempo de operación.
Notas
• El indicador de batería no aparece en la pantalla cuando el adaptador de CA se está utilizando o cuando
recibe alimentación de fuentes externas.
• Los tiempos de carga pueden diferir de los que se indican más arriba debido a las condiciones de uso, el
entorno y otros factores. La temperatura ambiente recomendada para la carga oscila entre los 10-30ºC (50-
86ºF).
ES
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Uso con el adaptador para batería de automóvil
Utilice el adaptador para batería de automóvil (suministrado) para alimentar el reproductor
desde el enchufe del encendedor de cigarrillos. El adaptador es para una batería de automóvil de
12V. No lo utilice con una batería de automóvil de 24V. El adaptador también puede utilizarse
en automóviles con sistema eléctrico de tierra negativa. No lo utilice en automóviles con sistema
eléctrico de tierra positiva.
PHONES
AUDIO
OPTICAL
OUT
VIDEO
LINE SELECT IN OUT
DC IN
9.5V
A
B
Al enchufe del
encendedor de cigarrillos
A clavija de DC
IN 9.5 V
Adaptador para batería de
automóvil (suministrado)
z Sugerencia
Si el adaptador interfiere con la operación del automóvil, utilice un cable de extensión comercial para
encendedor de cigarrillos.
Notas
• No utilice el adaptador para automóviles si ha sido golpeado o dañado.
• Arregle el cable de manera que no moleste al conductor. Además, no coloque el panel LCD donde el
conductor pueda verlo.
• Si la imagen no es nítida, mantenga el reproductor alejado del adaptador para batería de automóvil.
• Utilice el adaptador para batería de automóvil con el motor en marcha. Si se utiliza con el motor apagado,
la batería del automóvil puede quedar inutilizable.
• Si el enchufe del encendedor de cigarrillos está sucio de ceniza, etc., una mala conexión puede ocasionar
que el enchufe se caliente. Siempre límpielo bien antes de usarlo.
• El adaptador para batería de automóvil puede calentarse mientras se carga o luego de utilizarlo durante un
período prolongado. Eso no es una falla de funcionamiento.
Luego de utilizar el adaptador para batería de automóvil
Luego de apagar el reproductor, desconecte el adaptador para batería de automóvil del enchufe
del encendedor de cigarrillos.
Notas
• No apague el motor del automóvil mientras el reproductor esté encendido. Eso detendrá la alimentación de
corriente y podría dañar el reproductor.
• Desconecte el adaptador para batería de automóvil luego de utilizarlo. Debido a que en algunos automóviles
la corriente llega al enchufe del encendedor de cigarrillos aunque el motor esté apagado, la batería puede
descargarse con el tiempo.
• Al desconectar un adaptador para batería de automóviles, sostenga el enchufe para retirarlo.
• Al escuchar la radio del automóvil, desconecte el adaptador para batería del encendedor de cigarrillos para
evitar el ruido.
ES
8
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Presione [/1 en el control remoto
o deslice el interruptor [/1/HOLD
del reproductor a “[/1”.
Reproducción de discos
El reproductor se enciende y el indicador
de energía se muestra verde.
Reproducción de discos
3
4
Presione OPEN para abrir la tapa
del disco.
Dependiendo del DVD, algunas operaciones
pueden ser diferentes o estar restringidas.
Consulte las instrucciones de operación
proporcionadas con el disco.
Conecte el adaptador de CA o instale la
batería.
Inserte el disco a reproducir.
Empuje la cara de reproducción hacia
abajo hasta que se ajuste con un clic.
x
H
VOL
DISPLAY
MENU
RETURN
OPTIONS
POWER CHARGE
La cara de reproducción debe
mirar hacia abajo
OPEN
PO
WER
CHARGE
D
L
O
H
5
6
Empuje el PUSH CLOSE del
reproductor para cerrar la tapa del
disco.
OPEN \/1/HOLD
Presione H.
Comienza la reproducción.
• Algunos discos pueden comenzar a
reproducirse automáticamente luego de
cerrar la tapa del disco.
\/1
1
4
7
2
5
8
0
3
6
9
• Dependiendo del disco, puede aparecer
un menú en la pantalla. Vea página 11
para obtener más información.
• Luego de reproducir todos los títulos, el
reproductor se detendrá y volverá a
mostrarse la pantalla de menú.
H
x
1
Abra el panel LCD del reproductor.
Ajuste el interruptor LINE SELECT
sobre el lado derecho del reproductor en
“OUT”.
Notas
• Si el disco se inserta con la cara de reproducción
hacia arriba, aparecerá un mensaje que dice “No
hay disco” o “Imposible reproducir este disco.”
ES
,continúa
9
Download from Www.Somanuals.com. All Manuals Search And Download.
• Los discos creados en grabadoras de DVD deben
finalizarse correctamente para reproducirlos en
este reproductor. Para más información sobre la
finalización, consulte las instrucciones de
operación suministradas con la grabadora de
DVD.
Operaciones adicionales de
reproducción
• El disco todavía puede estar girando al abrir la
tapa del disco. Espere hasta que el disco se
detenga antes de retirarlo.
• Durante la operación podrá aparecer “ ” en la
pantalla. Este símbolo indica que una función
explicada en estas instrucciones de operación no
está disponible en el DVD VIDEO actual.
1
4
7
2
5
8
0
3
6
9
.
X
>
x
Para detener la reproducción
Presione x.
Si presiona H nuevamente, la reproducción
se reanudará desde donde la detuvo
(Reanudar reproducción). Vea página 11
para obtener más información.
Para
Operación
Presione x
Presione X
Presione >
Detener
Pausa
Para reproducir desde el principio, presione
x dos veces y luego presione H.
Vaya al siguiente
capítulo, pista o
escena en modo de
Para apagar el reproductor
Presionel el botón \/1 del control remoto o
deslice el interruptor \/1/HOLD del
reproductor a “\/1”.
reproducción continua
Vuelva al capítulo,
pista o escena anterior
en modo de
Presione .
Para evitar la operación accidental de un
botón del reproductor
Ajuste el interruptor \/1/HOLD del
reproductor en “HOLD”. Todos los botones
del reproductor están bloqueados mientras
que el botón del control remoto continúa en
funcionamiento.
reproducción continua
Adelante brevemente Presione
la escena actual*
durante
la reproducción.
* DVD VIDEOs solamente.
Las funciones mencionadas no podrán utilizarse
para algunas escenas.
Notas
• Un protector de pantalla aparece cuando usted
deja el reproductor en pausa o detenido sin
operación por más de 15 minutos. La imagen
desaparece cuando usted presiona H.
• El reproductor se apaga 15 minutos después de
comenzar la función de protector de pantalla
(Apagado automático).
ES
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Reanudar la reproducción desde
donde usted detuvo el disco
(Reanudar reproducción)
Uso del menú de DVD
Un DVD está dividido en secciones largas de
una película o presentación musical llamadas
“títulos”. Cuando usted reproduce un DVD
que contiene varios títulos, puede seleccionar
el título que desee con el botón TOP MENU.
Cuando usted reproduce DVDs que le
permiten seleccionar elementos tales como el
idioma del sonido y los subtítulos, seleccione
esos elementos con el botón MENU.
Cuando usted detiene la reproducción, el
reproductor recuerda el punto donde se
detuvo y muestra un mensaje en la pantalla.
Usted puede reanudar la reproducción desde
el mismo lugar presionando H nuevamente.
La función Reanudar reproducción funciona
aún después de apagar el reproductor,
siempre y cuando la tapa del disco se
mantenga cerrada.
1
4
7
2
5
8
0
3
6
9
Botones
de números
MENU
TOP MENU
1
4
7
2
5
8
0
3
6
9
C/X/x/c
ENTER
H
x
1 Presione TOP MENU o MENU.
El menú del disco aparece en la pantalla.
Los contenidos del menú varían de un
disco a otro.
1 Al reproducir un disco, presione x
para detener la reproducción.
Aparece un mensaje.
2 Presione C/X/x/c o los botones de
números para seleccionar el elemento
que desea reproducir o cambiar.
2 Presione H.
3 Presione ENTER.
El reproductor comienza a reproducir
desde donde usted lo detivo en el paso 1.
Nota
z Sugerencias
Dependiendo del disco, usted no podrá utilizar C/c
del reproductor para el menú de disco. En ese caso,
utilice C/c del control remoto.
• Para reproducir desde el principio del disco,
presione x dos veces y luego presione H.
• Al encender nuevamente el reproductor después
de apagarlo, la reproducción se reanuda
automáticamente.
Notas
• Dependiendo del lugar donde se detuvo, la
reproducción puede no comenzar desde
exactamente el mismo punto.
• El punto donde usted detuvo la reproducción se
borra cuando:
– usted abre la tapa del disco.
– usted desconecta la batería y el adaptador de
CA.
– usted cambia el ajuste del interruptor LINE
SELECT.
ES
,continúa
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Notas
Cambio del sonido
• Dependiendo del disco, usted no podrá cambiar el
formato de audio aunque esté grabado en
múltiples formatos de audio.
• Al reproducir pistas de audio DTS en un CD,
usted no podrá cambiar el sonido.
Al reproducir un DVD VIDEO grabado en
múltiples formatos de audio (PCM, Dolby
Digital o DTS), usted puede cambiar el
formato de audio. Si el DVD VIDEO está
grabado con pistas multilingües, usted
también puede cambiar el idioma.
Con CDs, usted puede seleccionar el sonido
del canal derecho o del izquierdo y escuchar
el sonido del canal seleccionado a través de
los parlantes derecho e izquierdo. Por
ejemplo, al reproducir un disco conteniendo
una canción con las voces en el canal derecho
y los instrumentos en el canal izquierdo, usted
puede escuchar los instrumentos a través de
ambos parlantes seleccionando el canal
izquierdo.
1
4
7
2
5
8
0
3
6
9
AUDIO
1 Presione AUDIO varias veces para
seleccionar la señal de audio
deseada.
El ajuste por defecto está subrayado.
◆ Al reproducir un DVD VIDEO
Dependiendo del DVD VIDEO la opción
de idioma varía.
Cuando el mismo idioma se muestra dos
o más veces, el DVD VIDEO se graba en
múltiples formatos de audio.
◆ Al reproducir un CD
• Estéreo: el sonido estéreo estándar
• Izqdo.: el sonido del canal izquierdo
(monoaural)
• Dcho.: el sonido del canal derecho
(monoaural)
z Sugerencia
Usted puede comprobar el formato de audio actual
(Dolby Digital, DTS, PCM, etc.) presionando
AUDIO varias veces al reproducir un DVD
VIDEO.
ES
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Presentación de subtítulos
Cambio de ángulos
Si varios ángulos (multiángulos) de una
escena están grabados en el DVD VIDEO,
Si los subtítulos están grabados en el disco,
usted podrá cambiar los subtítulos o
activarlos o desactivarlos cuando lo desee al
reproducir un DVD.
“
” aparece en la pantalla. Esto significa
que usted puede cambiar el ángulo de
visualización.
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
9
SUBTITLE
ANGLE
1 Presione ANGLE varias veces para
seleccionar un número de ángulo.
La escena cambia al ángulo seleccionado.
1 Presione SUBTITLE varias veces para
seleccionar un ajuste.
Dependiendo del disco, la opción de
idioma varía.
Notas
Para desactivar los subtítulos
• Algunos DVD VIDEOs no permiten cambiar de
ángulo aunque haya multiángulos grabados.
• Usted no puede cambiar de ángulo durante
Reproducción Lenta o Reproducción Rápida.
Seleccione “Subtitulo Desact.” en el paso 1.
Notas
• Dependiendo del DVD VIDEO, usted no podrá
cambiar los subtítulos aunque haya subtítulos
multilingües grabados en el mismo. Además,
usted no podrá desactivarlos.
• Al reproducir un disco con subtítulos, el subtítulo
puede desaparecer cuando usted presione
.
ES
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
3-294-108-11(1)
Sony Corporation Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|