2-103-393-13(1)
Super Audio CD
Player
Operating Instructions
SCD-CE595
©2004 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Features of the player ....................................................................................4
Compatible Disc Types .................................................................................4
About the Super Audio CD ...........................................................................5
Getting Started
Inserting batteries into the remote.................................................................6
Hooking Up the Audio Components.............................................................6
Playing Discs
Playing a Disc................................................................................................9
Using the Display ........................................................................................10
Replacing Discs While Playing a Disc........................................................12
— Ex-Change
Locating a Particular Point in a Track.........................................................13
Playing Tracks Repeatedly..........................................................................13
— Repeat Play
Playing Tracks in Random Order................................................................14
— Shuffle Play
Creating Your Own Program ......................................................................14
— Program Play
Enjoying a Multi-channel Super Audio CD................................................15
— Multi-channel management function
Additional Information
Precautions ..................................................................................................20
Notes on Discs.............................................................................................21
Troubleshooting...........................................................................................21
Specifications ..............................................................................................22
Index to Parts and Controls .........................................................................23
3US
Download from Www.Somanuals.com. All Manuals Search And Download.
Features of the player
Compatible Disc Types
This player is designed to play back 2-channel
and Multi-channel Super Audio CDs, and
conventional CDs, and provides the following
features:
You can play the following types of discs on this
player.
• Super Audio CDs
• Audio CDs
• Mounted with a Discrete Dual Laser Optical
Pickup, capable of reading a Super Audio CD
or conventional CD depending on the
exclusive wavelength.
This player cannot play the following discs. If
you try to play them, the error message “TOC
ERROR” or “NO DISC” will appear.
• CD-ROMs
• Quicker track access performance enabled by
an advanced servo mechanism.
• DVDs, etc.
Music discs encoded with copyright
protection technologies
• A Multi-Channel Management function that
allows you to adjust the multi-channel
playback environment according to the
allocation and size of your speakers.
• A Super Audio D/A Converter, which allows
higher-quality sound reproduction.
This product is designed to playback discs that
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with copyright
protection technologies are marketed by some record
companies. Please be aware that among those discs,
there are some that do not conform to the CD standard
and may not be playable by this product.
• A Super Audio CD can mark up to 255 track
numbers. This feature applies to SCD-CE595.
• The supplied remote is capable of controlling
both the SCD-CE595 and a conventional
Sony CD player.
Notes on CD-R/CD-RW playback
Discs recorded on CD-R/CD-RW drives may not be
played back because of scratches, dirt, recording
condition, or the drive’s characteristics. Besides, the
discs, which are not yet finalized at the end of
recording, cannot be played back. In these cases,
“READING” will remain or “TOC ERROR” will
appear in the display.
Note on dts-CDs
Do not play a dts-CD on this player. If you do, severe
noise will be generated.
4US
Download from Www.Somanuals.com. All Manuals Search And Download.
An SA-CD layer consists of the 2 channel area
or the multi-channel area.
About the Super Audio CD
2 channel area: An area in which 2 channel
stereo tracks are recorded
Multi-channel area:
Super Audio CD is a new high-quality audio
disc standard where music is recorded in the
DSD (Direct Stream Digital) format
An area in which multi-
(conventional CDs are recorded in the PCM
format). The DSD format, using a sampling
frequency 64 times higher than that of a
conventional CD, and with 1-bit quantization,
achieves both a wide frequency range and a wide
dynamic range across the audible frequency
range, and so provides music reproduction
extremely faithful to the original sound.
channel (up to 5.1 channels)
tracks are recorded
Example:
When the 2 channel area and the multi-channel area
are recorded on an SA-CD layer of a hybrid disc
2 channel area4)
Types of Super Audio CDs
There are two types of discs, depending on the
SA-CD layer and CD layer combination.
Multi-channel area4)
SA-CD layer
SA-CD layer:A high-density signal layer for
Super Audio CD
CD layer1): A layer that is readable by a
conventional CD player
1)
You can play the CD layer on a conventional CD
player.
Single layer disc
(a disc with a single SA-CD layer)
2)
Since both layers are on one side, it is not necessary
to turn the disc over.
3)
Press SA-CD/CD to select the layer you want to
SA-CD layer
4)
In case of a disc with both areas, press MULTI/2CH
Hybrid disc2)
(a disc with an SA-CD layer and a CD layer)
CD layer3)
SA-CD layer3)
5US
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Inserting batteries into
the remote
Connect the Super Audio CD player to an audio
component. Be sure to turn off the power of all
components before making connections and
connect securely to prevent noise.
Insert two R6 (size-AA) batteries into the
battery compartment with the + and – correctly
oriented to the markings. When using the
Connecting a multi-channel
amplifier
remote, point it at the remote sensor
player.
on the
When you have an amplifier equipped with the
5.1CH input jacks (multi-channel amplifier, AV
amplifier, etc.) and connect the player and the
amplifier through the ANALOG 5.1CH OUT
jacks (FRONT L/R, SURR L/R, CENTER, SUB
WOOFER), you can play a Multi-channel Super
Audio CD and enjoy the multi-channel
playback.
Tip
Use audio connecting cords for this connection.
For FRONT or SURR connection, use the
connecting cords (Red and White jacks) and be
sure to match the color-coded pin to the
appropriate jacks: white (left) to white and red
(right) to red. For CENTER and SUB WOOFER
connection, use the connecting cords (Black).
Under normal conditions, the batteries should last for
about six months. When the remote no longer operates
the player, replace both batteries with new ones.
Notes
• Do not leave the remote in an extremely hot or a
humid place.
• Do not drop any foreign object into the remote
casing, particularly when replacing the batteries.
• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight or
lighting apparatus. Doing so may cause a
malfunction.
FRONT or SURR connection
Audio connecting cords (one cord is supplied)
• If you do not intend to use the remote for an extended
period of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.
CENTER or SUB WOOFER
connection
Audio connecting cords (not supplied)
6US
Connecting a stereo amplifier
or MD deck
When you connect a stereo amplifier or make an
analog connection with an MD deck, connect the
player and the component through the
ANALOG 5.1CH OUT FRONT L/R jacks.
Use an audio connecting cord for this
connection. Be sure to match the color-coded
pin to the appropriate jacks: white (left) to white
and red (right) to red.
Audio connecting cord (supplied)
White (L)
To multi-channel
amplifier, AV amplifier,
etc.
Red (R)
A
B
C D
A: To front speaker input jacks (L/R)
B: To surround or rear speaker input jacks (L/R)
C: To sub woofer input jack
D: To center speaker input jack
Note
There are 5CH, 4CH, and 3CH Super Audio CD. When
you play these discs, the signal does not output from all
the jacks of the ANALOG 5.1CH OUT. For details of
the playback, see the cover or instructions of the Super
Audio CD.
Note
When a disc with the 2 channel area and multi-channel
area is played through the ANALOG 5.1CH OUT
FRONT L/R jacks, change the default playback area to
you do not, the multi-channel playback area will be
automatically played back and only the signal to the
front speakers will be output. In this case, the vocals or
other sounds may not be heard, depending on the disc.
7US
Connecting a digital
component
When using another Sony CD
player in conjunction with this
player
When you connect an MD deck or another
digital component through the DIGITAL (CD)
OPTICAL OUT connector, you can make a
digital recording.
You can set the supplied remote to be effective
Use an optical digital cable for this connection.
When connecting the optical digital cable to the
DIGITAL (CD) OPTICAL OUT connector,
push the cable plug in until it clicks into place.
Be careful not to bend or twist the optical cable.
Optical digital cable (not supplied)
Note
Only the audio signals of conventional CDs can be
output from the DIGITAL (CD) OPTICAL OUT
connector. Those of the Super Audio CD cannot be
output through the DIGITAL (CD) OPTICAL OUT
connector.
Connecting the AC power
cord
Connect the AC power cord to a wall outlet.
8US
7
8
Press H.
Playback starts from the first track. If you
want to start playing from a specific track,
turn l AMS L (or press ./>
on the remote repeatedly) to select the track
number before pressing H.
Playing Discs
Playing a Disc
The operations for normal play and the basic
operations during play are explained below.
Adjust the volume on the amplifier.
Basic operations during play
1
2
3
4
Turn on the amplifier. Turn down the
volume level to the lowest.
To
Do the following:
Stop play
Pause play
Press x.
Select the player position using the
input selector on the amplifier.
Press X.
Resume play
after pausing
Press X or H.
Press POWER on the player to turn on
the player.
Select a track
Turn l AMS L (or press
./> on the remote
repeatedly).
Press A OPEN/CLOSE on the player to
open the disc tray, and place a disc on
the tray.
Select a disc
Press DISC SKIP (or DISC SKIP
+/– on the remote) repeatedly.
By pressing DISC 1-5 on the
player, you can select a specific
disc directly.
Eject a disc
Press A OPEN/CLOSE on the
player.
Note
During playback, increase the volume level gradually
starting from the lowest level. The output from this
player may contain band width that is out of the normal
listening range. This may cause damage to the speakers
or ears.
With the label side up
Disc number
5
6
To place other discs, press DISC SKIP
(or DISC SKIP +/– on the remote)
repeatedly and place the discs in the
order you want to play.
Selecting the playback layer
Each time you press the button, the disc tray
turns and you can place the discs in the
empty disc compartments. The player plays
the disc in front of you first.
When playing a hybrid disc with an SA-CD
layer you want to listen to. Also, since both
layers are on one side, it is not necessary to turn
the disc over.
Press PLAY MODE (or CONTINUE on
the remote) repeatedly to select ALL
DISCS or 1DISC Continuous Play
mode.
Press SA-CD/CD to select the desired
playback layer.
Each time you press CONTINUE on the
remote, “ALL DISCS” or “1 DISC”
appears in the display.
To select the default playback
layer
When you select The player plays
1
2
Press MENU on the player.
ALL DISCS
All discs in the player
consecutively in the order
of disc number
Turn l AMS L (or press ./>
on the remote repeatedly) until “LAYER
SEL” appears in the display.
1DISC
Only the disc you have
selected
continued
9US
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Press l AMS L (or ENTER on the
remote).
Using the Display
The current default layer appears.
The display window shows various information
about the disc or track being played. This section
describes the current disc information and
information that appears for each play status.
4
5
Turn l AMS L (or press ./>
on the remote) to select the desired
playback layer.
Press l AMS L (or ENTER on the
remote).
Disc information when a disc
is loaded
Selecting the playback area
The display shows the current disc number, total
number of tracks and total playing time.
When playing a disc with the 2 channel playback
area and the multi-channel playback area
(page 5), you can select the playback area you
want to listen to.
A
B
C
Press MULTI/2CH to select the desired
playback area.
To select the default playback
area
F
E
D
A: Total number of tracks
B: Hybrid disc
1
2
Press MENU on the player.
C: Currently selected disc and number of playable
Turn l AMS L (or press ./>
on the remote repeatedly) until “M/2ch
SEL” appears in the display.
channels
D: Track 16 and above (for discs with 16 or more
tracks)
E: Total playing time
F: Current disc number
3
Press l AMS L (or ENTER on the
remote).
The current default area appears.
Notes on the disc number indications
• The red circle around a disc number indicates the
disc is ready to be played.
4
5
Turn l AMS L (or press ./>
on the remote) to select the desired
playback area.
• A semi-circle around the disc number indicates a disc
with tracks to be played. In Program Play mode, the
semi-circle indicates a disc with programed tracks.
• The disc number disappears when no disc is detected
in the disc component.
Press l AMS L (or ENTER on the
remote).
Note
The multi-channel playback area is automatically
selected whenever you start playback because “SEL–
Mch” (multi-channel playback area) is the factory
setting. Select “SEL– 2ch” (2 channel playback area)
when only the ANALOG 5.1CH OUT FRONT L/R
jacks are connected.
10US
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning off the information in
the display
Replacing Discs While
Playing a Disc
Press DISPLAY MODE on the remote.
— Ex-Change
Each time you press the button while playing a
disc, the display turns off and on alternately.
Even when the display is turned off, it will turn
on when certain buttons are pressed, and then
turn off again after a few seconds.
Before you start playing, when you press the
button to turn off the display, “DISP OFF”
appears, and when you press the button to turn
on the display, “DISP ON” appears.
You can open the disc tray while playing a disc
so that you can check what discs are to be played
next and replace discs without interrupting play
of the current disc.
1
Press EX-CHANGE on the player.
The disc tray opens and two disc
compartments appear. Even if the player is
playing a disc, it does not stop playing.
Displaying the information of
a TEXT disc in other
languages
2
Replace discs in the compartments
with new ones.
The player plays the disc on the left side
compartment after the current disc, and then
the one on the right side compartment.
You can change the displayed language if the
TEXT disc has multi language capacity. When
the player detects such a TEXT disc, “MULTI-
TEXT” appears in the display. Change the
language according to the procedures below.
3
Press DISC SKIP (or DISC SKIP +/– on
the remote).
The disc tray turns and other two disc
compartments appear.
1
2
Press MENU on the player.
4
5
Replace discs in the compartments
with new ones.
Turn l AMS L (or press ./>
on the remote repeatedly) until
“LANGUAGE” appears in the display.
Press EX-CHANGE on the player.
The disc tray closes.
3
Press l AMS L (or ENTER on the
remote).
Note
The current selected language (ENGLISH,
FRENCH, GERMAN, etc.) flashes.
If the player cannot display the language
used in a TEXT disc, “OTHER LANG”
appears in the display.
Do not push the disc tray to close it in Step 5, as you
may damage the player.
While the disc tray is open by pressing EX-
CHANGE on the player
• If the play of the current disc ends, the player stops
playing. If the disc is played in 1DISC Repeat Play
are reshuffled on the current disc.
4
5
Turn l AMS L (or press ./>
on the remote repeatedly) until the
desired language appears in the
display.
the current disc are played.
Press l AMS L (or ENTER on the
remote).
After a few seconds, the information
appears in the selected language.
12US
Download from Www.Somanuals.com. All Manuals Search And Download.
Locating a Particular
Point in a Track
Playing Tracks
Repeatedly
— Repeat Play
You can locate a particular point in a track
during play or play pause.
You can play an entire disc or a specific track
repeatedly. This function can be used with
1DISC Shuffle Play to repeat all the tracks in
Locating a point
Do the following:
Whilemonitoringthe Press and hold m/M
sound (Search)
during play.
By observing the
time indication
(High-Speed Search)
Press and hold m/M
during play pause.
Press REPEAT on the remote repeatedly
until “REP” or “REP1” appears in the
display.
By setting the start
time (Time Search)
1 Turn l AMS L (or
press ./> on the
remote repeatedly) in stop
mode to select the desired
track.
REP: For all the tracks on the disc(s).
REP1:For a single track only.
When “REP” is selected, Repeat Play changes
according to the selected play mode.
2 Press and hold m/M to
set the time to start play
while looking at the display,
then press H.
When the play The player repeats
mode is
ALL DISCS
All the tracks on all the discs in
Tip
Continuous Play sequential order.
When “OVER” appears in the display, the disc has
reached its end. Press and hold m to go back.
1DISC
All the tracks on the current disc in
Continuous Play sequential order.
Note
Tracks that are only a few seconds long may be too
short for monitoring. In this case, the player may not
search correctly.
1DISC Shuffle
All the tracks on the current disc in
random order.
Program Play
All the tracks in the program in
sequential order.
To cancel Repeat Play
Press REPEAT on the remote repeatedly until
both “REP” and “REP1” disappear.
Notes
• Repeat All Play cannot be used with ALL DISCS
Shuffle Play.
• Repeat All Play stops automatically after all the
tracks have been repeated five times.
• If you turn off the player or disconnect the power
cord, Repeat Play is canceled.
13US
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Tracks in Random
Order
Creating Your Own
Program
— Shuffle Play
— Program Play
When Shuffle Play is selected, the player will
play all the tracks on all the discs or on a specific
disc in random order.
You can pick out the tracks that you like and
specify the playback order in a program
containing up to 32 steps.
1
Press PLAY MODE repeatedly (or
PROGRAM on the remote) in stop
mode until “PGM” appears in the
display.
Shuffle Play on all discs
You can play all the tracks on all the discs in
random order.
2
Press DISC 1-5 on the player.
1
Press PLAY MODE (or SHUFFLE on the
remote) repeatedly in stop mode until
“ALL DISCS” and “SHUF” appear in the
display.
The selected disc number appears in the
display.
You can also select the desired disc number
by pressing DISC SKIP (or DISC SKIP +/–
on the remote) repeatedly.
2
Press H.
“;” appears while the player is “shuffling”
the tracks. The player will stop after playing
all the tracks once.
To program all the tracks on a disc at once,
proceed to Step 4 with “AL” displayed.
3
4
Turn l AMS L (or press ./>
on the remote repeatedly) to select the
desired track number.
Shuffle Play on one disc
Press l AMS L (or ENTER on the
remote).
You can play all the tracks on a specific disc in
random order.
If you entered the wrong track number
1
Press PLAY MODE (or SHUFFLE on the
remote) repeatedly in stop mode until
“1DISC” and “SHUF” appear in the
display.
Press CLEAR on the remote. Then repeat
Steps 3 and 4 to enter the correct track
number.
5
6
Repeat Steps 2 through 4 to enter other
tracks.
2
Press DISC 1-5 on the player.
“;” appears while the player is “shuffling”
the tracks. The player will stop after playing
all the tracks once.
Each time you enter a track number, the
total number of program steps appears in
the display.
To resume Continuous Play
Press PLAY MODE repeatedly (or CONTINUE
on the remote) in stop mode until “SHUF” and
“PGM” disappear.
Press H.
Program Play starts.
To resume Continuous Play
Note
Press PLAY MODE repeatedly (or CONTINUE
on the remote) in stop mode until “SHUF” and
“PGM” disappear.
The player does not go back to tracks which have
already been played.
Tip
The program remains even after Program Play ends.
Press H to play from the beginning of the program
again. The program remains even if you stop play.
14US
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• If you turn off the player, disconnect the power cord,
press A OPEN/CLOSE on the player, or switch the
playback layer or area, the program will be erased.
• If you switch the playback layer or area during
Program Play, a single track only will be played back
from its beginning, and then the program will be
erased.
Enjoying a Multi-channel
Super Audio CD
— Multi-channel management
function
This player is equipped with a Multi-channel
management function that sets the playback
mode of the Super Audio CD by the DSD-DSP
(built into the player) according to the layout or
size of your speaker.
Checking the contents of the
program
Before you start playing or while the player
is playing, press CHECK on the remote
repeatedly.
Front speakers
Each time you press the button, the disc and
track numbers will appear in the display in the
programed order.
L
R
If you press CHECK on the remote while the
player is playing, the programed disc and track
numbers will appear starting with the currently
playing program step.
Center speaker
Sub woofer
L
R
Changing the contents of the
program
Surround speakers
To set the Multi-channel management function,
select the appropriate preset playback mode (2
channel mode or Multi-channel mode), and then
adjust the output level balance for each speaker
(only in the case of Multi-channel mode).
You can change the contents of the program in
stop mode.
To
Do the following:
Erase a track
1 Press CHECK on the remote
repeatedly until the track
number you want to erase
appears.
Notes
• This features only work when you play the Super
Audio CD.
2 Press CLEAR on the remote.
• You may not be able to adjust the output level
balance depending on the speaker layout mode that
you selected.
Erase from the
last track in the
program
Press CLEAR on the remote.
Each time you press the button, the
last track of the program is erased.
Add a track to the Perform Steps 2 through 4.
end of the
program
Erase all tracks Hold down CLEAR on the remote
or x (for about 2 seconds) until
“PGM CLEAR” appears in the
display.
continued
15US
Download from Www.Somanuals.com. All Manuals Search And Download.
About “Large” or “Small” speaker
Selecting the playback mode
An “L” speaker is a speaker that can
reproduce bass frequencies plentifully. If
you select “S” for the surround speakers,
the bass frequencies will come from the
front speakers and/or sub woofer.
1
2
Press MENU on the player.
Turn l AMS L (or press ./>
on the remote repeatedly) until the
desired channel mode appears in the
display.
For normal use, select “Mch DIRECT” or
set all the speakers to “L” (ex. “5–
LARGE+SW”, “5–LARGE”, etc.). If the
sound is noisy or the Multi-channel
playback is not effective while playing a
Multi-channel Super Audio CD, change the
settings of the speakers concerned to “S”.
2chSP MODE: To play a 2 channel Super
Audio CD.
MchSP MODE: To play a Multi-channel
Super Audio CD.
3
4
Press l AMS L (or ENTER on the
remote).
5
Press l AMS L (or ENTER on the
remote).
The playback mode appears in the display.
To return to the normal display, press
MENU on the player.
Turn l AMS L (or press ./>
on the remote repeatedly) until the
desired playback mode appears in the
display.
Notes
• The Multi-channel management function does not
work when you select “Mch DIRECT” (you cannot
set the output level balance of each speaker).
• The front speaker setting is set to “L” automatically
when you set the sub woofer to “––”.
In 2 channel mode
Playback mode
2ch DIRECT*
2ch+SW
F
SW
––
a
a
a
• When you play a track that does not contain the LFE*
signal, the signal for the sub woofer does not output.
Therefore, when you select “Mch DIRECT”, “5–
LARGE+SW”, or “NO–CNTR+SW”, no signal
outputs from the sub woofer. However, when you
select “5–SMALL+SW” or “F–LARGE+SW”
(when you set the speaker setting to “S”), the bass
frequencies will come from the sub woofer.
* Low Frequency Enhancement (described as “.1
CH”)
In Multi-channel mode
Playback mode
Mch DIRECT*
5–LARGE+SW
5–LARGE
F
a
L
L
S
C
a
L
SR
a
L
SW
a
a
L
L
––
a
5–SMALL+SW
F–LARGE+SW
F–LARGE
S
S
L
L
L
L
S
S
a
S
S
––
a
• If you select a playback mode other than “2ch
DIRECT” or “Mch DIRECT” using the Multi-
channel management function, the sound distribution
to the speakers will change, possibly causing a
decrease in overall sound volume. If this occurs,
adjust the volume with the volume control on the
connected amplifier.
NO–CNTR+SW
NO–CNTR
––
––
L
L
––
* Each signal outputs directly from each speaker.
Explanation of table symbols
F: Front speakers
C: Center speaker
SR: Surround speakers
SW: Sub woofer
• If you change the playback mode while the player is
in Multi-channel mode, the output level balance
settings will be canceled.
• This function cannot be used during CD playback.
a: Signal is output
––: Signal is not output
L: Large
S: Small
16US
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Adjusting the output level
balance of each speaker
When you set the sub woofer to “––” in the Multi-
adjusted (“NOT IN USE” appears). Similarly,
“CNTR BAL” or “SURR BAL” cannot be
adjusted (“NOT IN USE” appears) when you set
the corresponding speaker to “––”.
You can adjust the following items in the case of
Multi-channel mode:
SURR BAL
The relative output level balance between the
front speakers (FRONT L/R) and the surround
speakers (SURR L/R)
7
Press l AMS L.
The balance adjustment display appears.
In stop mode, the test tone is output from
the selected speaker.
CNTR BAL
The relative output level balance between the
front speakers (FRONT L/R) and the center
speaker (CENTER)
Example:
When you select “SURR BAL” during stop
mode, the test tone is output from the front
speakers and surround speakers.
SW BAL
The relative output level balance between the
front speakers (FRONT L/R) and the sub woofer
(SUB WOOFER)
Notes
• Some adjustment may not work depending on the
Multi-channel mode that you selected.
• You cannot adjust the speaker level when “Mch
DIRECT” is selected.
8
9
Turn l AMS L to adjust the
output level.
To adjust the output level
balance on the front panel of the
player
You can adjust the output level balance of each
speaker while listening during playback. You
can also adjust it while listening to the test tone
during stop mode.
Note
The output level balance can be adjusted in up to
24 steps. Since fine adjustments can be made, it
may be difficult to observe the movement of
needle.
Press l AMS L.
1
2
Press MENU.
The player status returns to Step 6.
Repeat Steps 6 through 9 for more
adjustments.
Turn l AMS L until “LEVEL ADJ”
appears in the display.
3
Press l AMS L.
10Press MENU after you finish adjusting.
During playback, go to Step 6.
The display returns to the normal display.
4
5
Turn l AMS L until “TONE ON”
appears in the display.
To adjust the output level from
the remote
You can adjust the output level of each speaker
from the listening position by using the supplied
remote.
Press l AMS L.
The test tone issues from the speakers in
sequence with the speaker type appearing in
the display.
1
Press LEVEL ADJ during playback or
stop mode.
6
Turn l AMS L until the desired
item appears in the display.
During playback, go to Step 4.
Select the item from “SURR BAL”,
“CNTR BAL”, or “SW BAL”.
continued
17US
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Press ./> repeatedly until
“TONE ON” appears in the display.
Adjusting the speaker
distance
Press ENTER.
You can adjust the speaker distance when the
connected amplifier does not have the setting
menu for speaker distance. If the amplifier has
this function, we recommend that you set the
speaker distance on the amplifier. This setting is
available only for the Multi-channel Super
Audio CD.
The test tone issues from the speakers in
sequence with the speaker type appearing in
the display.
4
Press ./> repeatedly until the
desired item appears in the display.
Select the item from “SURR BAL”,
“CNTR BAL”, or “SW BAL”.
Note
Note
When you set the speaker distance on this player and
the amplifier, both of the setting may work and you
may not be able to get the proper result.
When you set the sub woofer to “––” in the Multi-
adjusted (“NOT IN USE” appears). Similarly,
“CNTR BAL” or “SURR BAL” cannot be
adjusted (“NOT IN USE” appears) when you set
the corresponding speaker to “––”.
FRT DIST
The distance from your listening position to the
front speakers
You can adjust from 3 to 23 feet (1.0 meter to 7.0
meters) in 1 foot (0.1 meter) steps.
If both front speakers are not placed an equal
distance from your listening position, set the
distance to the closest speaker.
5
6
Press ENTER.
The balance adjustment display appears.
In stop mode, the test tone is output from
the selected speaker.
Example:
SURR DIST
The distance from your listening position to the
surround speakers
You can adjust from 3 to 23 feet (1.0 meter to 7.0
meters) in 1 foot (0.1 meter) steps.
If both surround speakers are not placed an equal
distance from your listening position, set the
distance to the closest speaker.
When you select “SURR BAL” during stop
mode, the test tone is output from the front
speakers and surround speakers.
Press ./> repeatedly to adjust
the output level.
Note
The output level balance can be adjusted in up to
24 steps. Since fine adjustments can be made, it
may be difficult to observe the movement of
needle.
CNTR DIST
The distance from your listening position to the
center speaker
You can adjust from 3 to 23 feet (1.0 meter to 7.0
meters) in 1 foot (0.1 meter) steps.
7
8
Press ENTER.
The player status returns to Step 4.
Repeat Steps 4 through 7 for more
adjustments.
SW DIST
The distance from your listening position to the
sub woofer
You can adjust from 3 to 23 feet (1.0 meter to 7.0
meters) in 1 foot (0.1 meter) steps.
Press LEVEL ADJ after you finish
adjusting.
The display returns to the normal display.
DIST UNIT
The unit of measure for setting distances (meter
or feet)
The initial setting is “SEL–FEET” for the North
American model and “SEL–METER” for the
European model.
18US
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
7
8
Press l AMS L (or ENTER on the
remote).
Speaker distance cannot be adjusted in the following
cases.
The player status returns to Step 4.
Repeat Steps 4 through 7 for more
adjustments.
– When the player is reading the disc information of
CD (or the CD area of Super Audio CD)
– When the player is reading the 2 channel area of
Super Audio CD
Press MENU on the player after you
finish adjusting.
1
2
Press MENU on the player.
The display returns to the normal display.
Turn l AMS L (or press ./>
on the remote repeatedly) until “SPK
DIST” appears in the display.
Selecting the distance unit
In Step 4 above, select “DIST UNIT”.
Turn l AMS L (or press ./> on
the remote) to select “SEL–METER” or “SEL–
FEET”, then press l AMS L (or ENTER
on the remote).
3
4
Press l AMS L (or ENTER on the
remote).
Turn l AMS L (or press ./>
on the remote repeatedly) until the
desired item appears in the display.
Setting speaker distances back
to the default
Select the item from “FRT DIST”, “SURR
DIST”, “CNTR DIST” or “SW DIST”.
Set all speaker distances to 10 feet (3 meters).
Note
When you set the sub woofer to “––” in the Multi-
adjusted (“NOT IN USE” appears). Similarly,
“CNTR DIST” cannot be adjusted (“NOT IN
USE” appears) when you set the center speaker to
“––”.
5
6
Press l AMS L (or ENTER on the
remote).
The speaker distance adjustment display
appears.
Example:
When you select “SURR DIST” (with
“DIST UNIT” set to “SEL–FEET”).
Turn l AMS L (or press ./>
on the remote repeatedly) to adjust the
speaker distance.
19US
Download from Www.Somanuals.com. All Manuals Search And Download.
On inserting a disc
You may hear a transmission or a mechanical sound
from the player. This indicates that the player is
automatically adjusting its internal mechanisms
according to the inserted disc.
You may also hear the mechanical sound from the
player when you insert a warped disc.
Additional Information
Precautions
On safety
• Caution – The use of optical instruments with this
On cleaning
product will increase eye hazard.
Clean the cabinet, panel, and controls with a soft cloth
slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder, or
solvent such as alcohol or benzine.
• Should any solid object or liquid fall into the cabinet,
unplug the player and have it checked by qualified
personnel before operating it any further.
• AC power cord must be changed only at the qualified
service shop.
On transportation
• Be sure to remove the discs on the tray.
• The unit is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet, even if the unit itself has been turned off.
• Be sure to close the disc tray.
If you have any questions or problems concerning your
player, please consult your nearest Sony dealer.
On power sources
• Before operating the player, check that the operating
voltage of the player is identical with your local
power supply. The operating voltage is indicated on
the nameplate at the rear of the player.
• The player is not disconnected from the mains as
long as it is attached to the mains, even if the player
itself has been turned off.
• If you are not going to use the player for a long time,
be sure to disconnect the player from the mains. To
disconnect the mains lead, grasp the plug itself; never
pull the cord.
On placement
• Place the player in a location with adequate
ventilation to prevent heat build-up in the player.
• Do not place the player on a soft surface such as a rug
that might block the ventilation holes on the bottom.
• Do not place the player in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust or mechanical shock.
On operation
• If the player is brought directly from a cold to a warm
location, or is placed in a very damp room, moisture
may condense on the lenses inside the player. Should
this occur, the player may not operate properly. In
this case, remove the disc and leave the player turned
on for about an hour until the moisture evaporates.
• During power on, some noise may be heard while the
disc is being loaded into the Super Audio CD player.
This is not a malfunction.
On adjusting the volume
Do not turn up the volume too much while listening to
a portion with very low level inputs or no audio signals.
If you do, the speakers may be damaged when a peak
level portion is played.
20US
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Discs
Troubleshooting
On handling discs
If you experience any of the following
difficulties while using the player, use this
troubleshooting guide to help you remedy the
problem. Should any problem persist, consult
your nearest Sony dealer.
• To keep the disc clean, handle the disc by its edge.
Do not touch the surface.
• Do not stick paper or tape on the disc.
There is no sound.
• Check that the player is connected securely.
• Make sure you operate the amplifier correctly.
• Use only round-shaped discs. If you use a special
shaped disc (e.g., star-shaped, heart-shaped, or
square-shaped, etc.), the player may be damaged.
• Do not use a disc with a seal attached on such as on
a used disc or rental disc.
There is no sound from the DIGITAL (CD)
OPTICAL OUT connector.
• The audio signals of the Super Audio CD cannot
be output from the DIGITAL (CD) OPTICAL
OUT connector.
On keeping discs
The disc does not play.
• Do not expose the disc to direct sunlight or heat
• There is no disc inside the player.
• Place the disc on the disc tray with the label side
up.
sources such as hot air ducts.
• After playing, store the disc in its case. If you put it
on top of another disc without the case, the disc may
be damaged.
• The disc is placed at an angle. Reload the disc.
• Moisture has condensed inside the player.
Remove the disc and leave the player turned on for
about an hour.
On placing discs on the disc tray
Make sure the disc is positioned securely on the tray.
If not, the player or the disc may be damaged.
page 4).
On cleaning
• If the disc is dirty with fingerprints or dust, it may
lessen the quality of the audio out.
The remote does not function.
• Remove any obstacles in the path of the remote
and the player.
• Before playing, clean the disc with a cleaning cloth.
Wipe the disc from the center out.
• Point the remote at the remote sensor on the
player.
• If the batteries in the remote are weak, replace
with new ones.
• Be sure that the command mode of the remote
• Clean the disc with a soft cloth slightly moistened
with water, and remove moisture with a dry cloth.
• Do not use solvents such as benzine, thinner, record
cleaners, or anti-static spray.
There is no sound from the SUB WOOFER
jack.
• Select a playback mode in which the sub woofer
signal is output from the SUB WOOFER jack.
The mode indication is displayed with “+ SW”
(page 16) when such a mode is selected.
• When you play a track that does not contain the
LFE signal, the signal outputs from the SUB
WOOFER jack only when you select “5–
SMALL+SW” or “F–LARGE+SW” for Multi-
continued
21US
Download from Www.Somanuals.com. All Manuals Search And Download.
A disc cannot be ejected and “LOCKED”
appears in the front panel display.
• Contact your Sony dealer or local authorized Sony
service facility.
Specifications
When a Super Audio CD is played
Playing frequency range 2 Hz to 100 kHz
“REMOVE” is displayed in the front panel
display.
Frequency response
Dynamic range
2 Hz to 40 kHz (–3 dB)
100 dB or more
• Remove the disc in front of you and turn off the
player once, and then turn it on again.
Total harmonic distortion rate
0.0035 % or less
Wow and flutter
Value of measurable limit
(±0.001 % W. PEAK) or
less
After you have attempted the
prescribed corrective actions
If the player still does not operate properly, or if
other problems not described above occur, turn
off the player, unplug it from the power outlet
for a few minutes, then reinsert the plug into the
power outlet.
When a CD is played
Frequency response
2 Hz to 20 kHz
Dynamic range
96 dB or more
Total harmonic distortion rate
0.0039 % or less
Wow and flutter
Value of measurable limit
(±0.001 % W. PEAK) or
less
Output connector
Jack type Output
level
Load
impedance
ANALOG Phono
5.1CH OUT jacks
2 Vrms (at Over 10
50 kilohms) kilohms
DIGITAL
(CD)
OPTICAL output
OUT* connector
Square
optical
–18 dBm
(Light
emitting
wavelength:
660 nm)
* Output only the audio signals of the CD
General
Laser
Semiconductor laser
(Super Audio CD: λ= 650
nm) (CD: λ= 780 nm)
Emission duration:
continuous
Power requirements
Power consumption
Dimensions (w/h/d)
120 V AC, 60 Hz
15 W
430 × 110 × 420 mm incl.
projecting parts
5.5 kg
Mass (approx.)
Supplied accessories
Audio connecting cord
Remote commander
Battery
Red and White × 2 (1)
RM-SX800 (1)
R6 (size-AA) (2)
Design and specifications are subject to change
without notice.
22US
Download from Www.Somanuals.com. All Manuals Search And Download.
Index to Parts and Controls
Further details are provided on the pages indicated in parentheses.
Instructions in this manual describe the controls on the player. You can also use the controls on the
remote if they have the same or similar names as those on the player.
Front Panel
1
2
3
4
5 6 7
8
9 q;
ql qk qj qh qg
qf
qd
qs
qa
Each time you press the button, the playing time of
the track, the remaining time of the disc, or TEXT
information appears in the display.
Press to select the disc directly.
C Remote sensor
Press to select the play mode.
Press to select the playback area when a disc with
the 2 channel area and the multi-channel area
(page 5) is loaded.
I l AMS L dial
Each time you press the button while playing back
a hybrid disc, the layer to be played back switches
between the SA-CD layer and the CD layer.
Press to enter the menu.
Press to replace discs while playing a disc.
Press to exit from the menu and return to the
normal display.
Press to select the disc.
N MULTI CHANNEL DECODING indicator
Turns on when you turn on the player, or when the
Multi-channel Super Audio CD is loaded and
select the multi-channel playback area by pressing
MULTI/2CH.
continued
23US
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
Select the command mode.
Press to resume Continuous Play from Shuffle Play
or Program Play.
Each time you press the button, the playing time of
the track, the remaining time of the disc, or TEXT
information appears in the display.
Press to turn the display information off or on.
Press to delete a programed track number.
Press to adjust the output level balance for the
Press to check the programed order.
L AMS ./> buttons
Each time you press the button while playing back
a hybrid disc, the layer to be played back switches
between the SA-CD layer and the CD layer.
Press to select the playback area when a disc with
the 2 channel area and the multi-channel area
(page 5) is loaded.
Press to select the disc.
Sony Corporation Printed in Malaysia
|