MODEL
FO-DC550
SYSTEM
OPERATION MANUAL
PREPARATIONS
LOADING PAPER
9
14
FUNCTIONS
26
36
SET UP THE SOFTWARE
PRINTER/SCANNER
FUNCTIONS
57
62
USER SETTINGS
TROUBLESHOOTING AND
MAINTENANCE
69
92
94
OPTIONAL EQUIPMENT
APPENDIX
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS................................................................................................................ 3
ENVIRONMENTAL INFORMATION ......................................................................... 5
INTRODUCTION....................................................................................................... 6
MAIN FEATURES ..................................................................................................... 7
1 PREPARATIONS
PART NAMES ................................................................................................... 9
POWER ON AND OFF.................................................................................... 12
2 LOADING PAPER
PAPER ............................................................................................................ 14
CHANGING A TRAY'S PAPER SIZE SETTING ............................................. 19
3 MAKING COPIES
NORMAL COPYING........................................................................................ 20
SELECTING THE TRAY ................................................................................. 23
SORT COPY ................................................................................................... 29
COPYING MULTIPLE ORIGINALS ONTO A SINGLE SHEET OF PAPER
(2 IN 1 copy).................................................................................................... 31
CREATING MARGINS WHEN COPYING (Margin shift)................................. 34
5 SET UP THE SOFTWARE
SOFTWARE FOR FO-DC550 ......................................................................... 36
BEFORE INSTALLATION ............................................................................... 37
INSTALLING THE SOFTWARE...................................................................... 38
SETTING UP BUTTON MANAGER................................................................ 51
CONNECTING THE MACHINE TO YOUR COMPUTER................................ 55
1
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE PRINTER MODE ........................................................................ 58
SCANNING USING THE KEYS ON THE MACHINE ...................................... 59
OPERATION IN COPY, PRINTER, AND SCANNER MODES ....................... 60
USER PROGRAMS......................................................................................... 62
8 TROUBLESHOOTING AND MAINTENANCE
DISPLAY MESSAGES .................................................................................... 69
PROBLEMS DURING SETUP OF THE SOFTWARE..................................... 75
MISFEED REMOVAL...................................................................................... 79
SCAN HEAD LOCKING SWITCH ................................................................... 83
CHECKING THE TOTAL COUNT................................................................... 88
CLEANING THE MACHINE ............................................................................ 89
ABOUT SUPPLIES.......................................................................................... 91
SYSTEM CONFIGURATION........................................................................... 92
NETWORK EXPANSION KIT (AR-NB2 N) ..................................................... 92
250-SHEET PAPER FEED UNIT (AR-D16).................................................... 92
10 APPENDIX
SPECIFICATIONS........................................................................................... 94
SOFTWARE LICENSE.................................................................................... 99
MATERIAL SAFETY DATA SHEET.............................................................. 101
INDEX............................................................................................................ 109
2
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS
Caution label on the machine
The label (
) in the fusing area of the machine indicates the following:
: Caution, risk of danger
: Caution, hot surface
Cautions on using the machine
Follow the cautions below when using this machine.
Warning:
• The fusing area is hot. Exercise care in this area when removing misfed paper.
• Do not look directly at the light source. Doing so may damage your eyes.
Caution:
• Place the machine on a firm, level surface.
• Do not install the machine in a humid or dusty location.
• When the machine is not used for a long time, for example for consecutive
holidays, turn the power switch off and remove the power cord from the outlet.
• When moving the machine, be sure to turn the power switch off and remove the
power cord from the outlet.
• Do not switch the machine rapidly on and off. After turning the machine off, wait 10
to 15 seconds before turning it back on.
• Do not cover the machine with a dust cover, cloth or plastic film while the power is
on. Doing so may prevent heat radiation, damaging the machine.
• Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
• The socket-outlet shall be installed near the machine and shall be easily
accessible.
Important points when selecting an installation site
Do not install your machine in areas that are:
• damp, humid, or very dusty
• exposed to direct sunlight
• poorly ventilated
• subject to extreme temperature or humidity changes, e.g., near an air conditioner
or heater.
Be sure to allow the required space around the
machine for servicing and proper ventilation.
8" (20cm)
4"
(10cm)
4"
(10cm)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Cautions on handling the machine
Be careful in handling the machine as follows to maintain the performance of this
machine.
Do not drop the machine, subject it to shock or strike it against any object.
Do not expose the drum cartridge to direct sunlight.
• Doing so will damage the surface (green portion) of the drum cartridge, causing
smudges on copies.
Store spare supplies such as drum cartridges and TD cartridges in a dark
place without removing from the package before use.
• If they are exposed to direct sunlight, smudges on copies may result.
Do not touch the surface (green portion) of the drum cartridge.
• Doing so will damage the surface of the cartridge, causing smudges on copies.
Supply and Consumables
The supply of spare parts for a repair of the appliance is guaranteed for at least 7
years following the termination of production. Spare parts are those parts of the
apparatus which may break down within the scope of the ordinary use of the
product - whereas those parts which normally exceed the life of the product are not
to be considered as spare parts. Consumables too, are available for 7 years
following the termination of production.
Trademark acknowledgements
• Sharpdesk is a trademark of Sharp Corporation.
®
®
®
®
®
®
• Microsoft , Windows , Windows 95, Windows 98, Windows Me, Windows
®
®
®
NT 4.0, Windows 2000, Windows XP and Internet Explorer are registered
trademarks or trademarks of Microsoft Corporation in the U.S.A. and other
countries.
• IBM, PC/AT, and PowerPC are trademarks of International Business Machines
Corporation.
®
• Acrobat Reader Copyright © 1987-2002 Adobe Systems Incorporated. All rights
reserved.
Adobe, the Adobe logo, Acrobat, and the Acrobat logo are trademarks of Adobe
Systems Incorporated.
• All other trademarks and copyrights are the property of their respective owners.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
ENVIRONMENTAL INFORMATION
As an ENERGY STAR® Partner, SHARP has determined that
this product meets the ENERGY STAR® guidelines for energy
efficiency.
Safety precautions:
This Digital Copier is rated Class 1 and complies with 21 CFR 1040.10 and
1040.11 of the CDRH standards. This means that the unit does not produce
hazardous laser radiation. For your safety, observe the precautions below.
• Do not remove the cabinet, operation panel or any other covers.
• The unit’s exterior covers contain several safety interlock switches. Do not
bypass any safety interlock by inserting wedges or other items into switch slots.
A small amount of ozone is produced within the unit during operation. The
emission level is insufficient to cause any health hazard.
Note:
3
(0.2mg/m ) calculated as an 8hr. time-weighted average concentration.
However, since the small amount that is emitted may have an objectionable odor, it
is advisable to place the unit in a ventilated area.
USB 2.0 compatible
When connecting the machine by USB 2.0 (Hi-Speed mode),
be sure to read "System requirements for USB 2.0 (Hi-Speed
mode)" (p.57) to verify that your system and the machine
settings are configured appropriately.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Using the manual
This machine has been designed to provide convenient copying features in a
minimum amount of office space and with maximum operational ease. To get full use
of all machine features, be sure to familiarize yourself with this manual and the
machine. For quick reference during machine use, keep this manual in a handy
location.
About the operation manuals
The operation manuals for the machine are as follows:
Operation Manual (this manual)
Explains the machine and how to use it as a copier. Also explains how to install the
software that allows the machine to be used as a printer and scanner for your
computer.
Operation Manual (for facsimile)
Explains the procedures for using the machine as a facsimile machine.
Refer to this manual for user programs, troubleshooting, and other information
related to faxing.
Online Manual (on the accessory CD-ROM)
Explains the procedures for using the machine as a printer or a scanner.
Conventions used in this manual and online manual
• Illustrations of driver screens and other computer screens show the screens that
appear in Windows XP Home Edition. Some of the names that appear in these
illustrations may differ slightly from the screens that appear in other operating systems.
• The explanations in this manual assume that the person who will install the product
and the users of the product have a working knowledge of Microsoft Windows.
• This operation manual refers to the Reversing Single Pass Feeder as the "RSPF".
• In this manual, the following icons are used to provide the user with information
pertinent to the use of the machine.
Warns that injury may result if the contents of the warning are
not properly followed.
Warning
Cautions that damage to the machine or one of its components may
result if the contents of the caution are not properly followed.
Caution
Notes provide useful information on the specifications, functions,
performance, and operation of the machine.
Note
The display screens, messages, and key names shown in the manual may differ
from those on the actual machine due to product improvements and modifications.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
MAIN FEATURES
High-speed laser copying
First-copy time*1 at 300 dpi*2 is only 9.6 seconds.
Copying speed is 16 copies per minute. This is ideal for business use and provides a
big boost to workplace productivity.
*1 The copy time in the case when the power is turned on and copying using the
document glass is started immediately after the power save indicator goes off (8-1/2"
x 11", paper fed from paper tray).
The first-copy time may vary depending on machine operating conditions and
ambient conditions such as temperature.
*2 "dpi" ("dots per inch") is unit that is used to measure resolution. Resolution
indicates how much detail can be reproduced in a printed or scanned image.
High-quality digital image
• High-quality copying at 600 dpi is performed.
• In addition to automatic exposure adjustment, two original modes can be selected:
"TEXT" for text-only originals, and "PHOTO" for photographs. The exposure can
be adjusted to five levels in each mode.
• The photo mode copying function allows clear copying of delicate halftone original
images such as monochrome photos and color photos.
Enhanced copying features
• Zoom copies can be made from 25% to 400% in increments of 1%. (When the
RSPF is being used, the zoom copy ratio range is 50% to 200%.)
• Continuous copying of up to 99 copies is possible.
• Sets of output can be offset from each other for easy separation (offset function).
• Sorting by sets is possible without the need for a sorter or other special device
(Sort copy).
• Includes convenient features such as margin shift, 2 IN 1 copy, and automatic two-
sided copying.
3
3
2
2
1
1
A
A
Sort copy
Offset function
2 IN 1 copy
Margin shift
Scan once/Print many
• The machine is equipped with a memory buffer allowing the machine to scan an
original once and make up to 99 copies of the scanned image. This improves
workflow, reduces operating noise from the machine and reduces wear and tear
on the scanning mechanism, which provides for a higher reliability.
LCD panel displays messages
• The LCD panel displays messages that show function settings and the status of
the machine.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Fax function
• The machine is equipped with a plain paper laser fax function that is Super G3
compatible and includes a print hold feature. (Operation Manual for facsimile)
Laser printer function
• The accompanying printer driver can be installed to enable use of the machine as
a printer.
Color scanner function
• The accompanying scanner driver can be installed and the machine connected to
a computer using a USB cable to enable use as a scanner.
Network connection (option)
• The optional Network Expansion Kit can be installed to enable the machine to be
used as a network printer and network scanner. (Network Expansion Kit Online
Manual)
Environment and people friendly design
• Preheat mode and auto power shut-off mode are provided to reduce power
consumption when the machine is not in use.
• A universal design has been implemented in the product whereby the height of the
operation panel and shape of the keys are designed to be usable by as many
people as possible.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
PREPARATIONS
1
This chapter provides basic information that you should know before using the machine.
1
PART NAMES
RSPF
Reversing tray
Original guides
Document
feeder cover
1
2
Exit area
Document feeder tray
5
6
7
3
4
Bypass tray
16
Interface
USB
Drum cartridge
TD cartridge
connector
Parallel
connector
5
8
9
13
10
11
12
3
14
15
11
1
2
3
9
Document glass
Operation panel
Front cover
Paper output tray extension
Power switch
10
11
12
13
Handles
4 Paper tray
Power cord
5
Side cover
Fusing unit release lever
Transfer charger
Charger cleaner
Paper holder arm
Side cover open button
6
7
8
14
15
16
Bypass tray paper guides
Paper output tray
9
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATIONS
Operation panel
1
2
Keys for fax function
(See the Operation Manual
for facsimile.)
6
7
8 9 10 11
12 13 14
15
8
9
1
2
[MODE SELECT] key / Mode indicators
Press this key to select the mode. The
indicator of the selected mode lights (copy,
printer, scanner, fax mode indicators).
[TRAY SELECT] key (
Use to select the paper tray that has the
desired paper for copying.
)
Tray location indicator
Display
Indicates the selected paper tray. The
indicator blinks when the tray is out of
paper during operation or is not closed
properly.
This shows messages indicating the
machine status and any problems that
occur, as well as user programs and
function setting menus.
10
[MENU] key
Numeric keys
3
4
Press this key to select the paper size
for copying, to configure a user program
or to display the total count.
[2-SIDED COPY] key
Press to select the automatic two-sided
copying mode.
[E-SORT/SP.FUN] key
Press to select the sort function, 2 IN 1
copy function, or margin shift function.
Use these to enter the number of copies
and other numerical settings.
The keys can also be used to select
items in function setting menus.
11
12
[CLEAR] key (
)
Use this to clear the set number of
copies, as well as cancel a job that is in
progress. When a setting menu appears,
use this key to move back to the
previous menu level.
Power save indicator
This lights up when the power save
function is activated.
13
[
] key (
), [
] key (
),
[ENTER] key
Press the [
5
] key (
) or [
] key
(
) to select an item in a function setting
menu.
6 RSPF indicator
Press the [ENTER] key to enter a selection.
This lights up when an original is placed
in the RSPF.
Error indicator
This lights steadily or blinks when a
paper misfeed or other error occurs.
14
[EXPOSURE] key
Use to switch from auto exposure
adjustment to text mode or photo mode.
7
10
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATIONS
3
4
5
1
Display
READY TO COPY.
100% 8.5x11
0
18
19
20
21
16 17
1
15
18
19
20
[COPY RATIO] key
Press to select an enlargement or
reduction ratio.
To select a preset ratio setting, press the
[COPY RATIO] key and select the
desired preset ratio. To select a ratio
that is not preset, press the [COPY
RATIO] key, select the preset ratio that
is closest to the desired ratio, and then
Shows the current copy ratio.
Shows the selected paper size.
Shows the number of copies that has
been entered with the numeric keys.
A checkmark " " appears when the
exposure has been changed, or when
two-sided copying, sort, 2 IN 1, or
margin shift is selected.
21
press the [
] key (
) or [
] key
(
) to increase or decrease the ratio in
increments of 1%.
1
16
[START] key (
) / Ready indicator
The ready indicator lights up when
copying or scanning is possible.
To begin copying, press the [START]
key (
).
The [START] key (
) is also pressed
to return to normal operation from auto
power shut-off mode.
1
1
7
[CLEAR ALL] key (
)
This returns all functions to the default
settings. When pressed in a setting
menu, this returns the settings and
display to the initial state.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER ON AND OFF
The power switch is located on the left side of the machine.
If you use the machine in a country other than the country
Warning
where the machine was purchased, you will need to make sure
that your local power supply is compatible with your model. If
you plug the machine into an incompatible power supply,
irreparable damage to the machine will result.
Power on
Turn the power switch to the "ON" position.
The ready indicator will light up and other
indicators which show the initial settings of the
display will also light up to indicate the ready
condition. For the initial settings, see the
"Initial settings" (below).
You can select copy settings and press the [START] key (
switch is turned on. Copying will start automatically.
) after the power
Only insert the power cord into a properly grounded wall socket.
Do not use extension cords or power strips.
Caution
Language setting
The first time the power is turned on after shipment from the factory, a message will
appear in English in the display prompting you to select the language. Select the
language with the [
] key (
) or [
] key (
) and then press the [ENTER] key.
The language can also be changed in the user programs (p.65).
Initial settings
The machine reverts to the initial settings when it is first turned on, when the [CLEAR
ALL] key (
) is pressed, or when no keys are pressed for the preset "AUTO
CLEAR" time following the end of a copy job. When the machine reverts to the initial
settings, all settings and functions selected to that point are canceled. The "AUTO
CLEAR" can be changed in the user programs. (p.62)
When in the copy mode
READY TO COPY.
100% 8.5x11
0
The main screen of copy mode appears.
Copy ratio: 100%, Exposure: Automatic
Copy quantity: 0, All special copier modes: Off, Paper tray: Tray 1 (Upper paper tray)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATIONS
About the scan head
The scan head lamp remains on constantly when the machine is in the ready
condition (when the ready indicator is illuminated).
The machine adjusts the scan head lamp periodically to maintain copying quality. At
this time, the scan head moves automatically. This is normal and does not indicate
machine trouble.
Power off
1
Normally keep in the "ON" position when using the fax function.
Note
Make sure that the machine is not in operation and then turn the power
switch to the "OFF" position.
If the power switch is turned off while the machine is
in operation, a misfeed may occur and the job that
was in progress will be canceled.
In cases where the machine will not be used for a
long time, turn off the power switch and remove the
power cord from the outlet.
Check the following to make sure the machine is not in operation:
• The ready indicator is lit. (Initial state)
• The power save indicator is lit. (preheat mode or auto shut-off mode)
Power save modes
The machine has two power save modes to reduce overall power
consumption and thereby reduce the cost of operation. In addition,
these modes conserve natural resources and help reduce
environmental pollution. The two power save modes are preheat
mode and auto power shut-off mode.
Preheat mode
This function automatically switches the machine to a low power consumption state if
the set duration of time elapses without the machine being used when the power is
on. In this mode, the power save indicator lights up. Normal operation automatically
resumes when a key on the operation panel is pressed, an original is placed, a print/
fax job is received.
Auto power shut-off mode
This function automatically switches the machine to a state that consumes even less
power than preheat mode if the set duration of time elapses without the machine being
used when the power is on. The power save indicator lights up, the display shows a
message indicating that the machine is in auto power shut-off mode. To resume normal
operation, press the [START] key (
when a print/fax job is received or scanning is begun from a computer. While in auto
power shut-off mode, no keys (except the [START] key ( )) can be used.
). Normal operation also resumes automatically
The preheat activation time and the auto power shut-off time can be
changed with "PREHEAT MODE" and "AUTO SHUT-OFF TIME" in the
user programs. It is suggested that you set times that are appropriate
for your usage of the machine. (p.62)
Note
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
LOADING PAPER
2
The tray location indicator will blink when there is no paper in the selected paper
tray, or when the selected paper tray is not closed or is improperly closed.
PAPER
For best results, use only SHARP recommended paper.
Paper tray type Paper type
Size
Weight
Capacity
Paper tray
Standard paper 5-1/2" x 8-1/2" *1
Recycled paper (Invoice)
15 lbs. to 21 lbs. 250 sheets *2
(56 g/m2 to
(The paper
should not
exceed the
line on the
tray)
8-1/2" x 11" (Letter) 80 g/m2)
8-1/2" x 13" *1
(Foolscap)
8-1/2" x 14" (Legal)
Bypass tray *3 Standard paper 3-1/2" x 5-1/2" to
Recycled paper 8-1/2" x 14"
15 lbs. to 21 lbs. 50 sheets *2
(56 g/m2 to
80 g/m2)
Thick paper
14 lbs. to 34.5 lbs. Load one
(52 g/m2 to
sheet at a
time in the
bypass tray.
Transparency
film/Labels
Envelopes *4
128 g/m2) *5
Monarch
(3-7/8" x 7-1/2")
Commercial 9
(3-7/8" x 8-7/8")
Commercial 10
(4-1/8" x 9-1/2")
*1 5-1/2" x 8-1/2" and 8-1/2" x 13" size paper can not be used for the fax function.
*2 The number of sheets of paper that can be loaded varies depending on the weight of
the paper.
*3 The bypass tray can not be used for the fax function.
*4 Do not use non-standard envelopes or envelopes that have metal clasps, plastic
snappers, strings, windows, linings, self-adhesive strips, patches or synthetic materials.
Do not use envelopes that are filled with air or envelopes that have labels or stamps
attached. These will damage the machine.
*5 When loading paper larger than 8-1/2" x 11" (A4) size, do not use paper of weight
greater than 28 lbs. (105 g/m2 ).
14
Download from Www.Somanuals.com. All Manuals Search And Download.
LOADING PAPER
Special papers
Follow these guidelines when using special papers.
G Use SHARP recommended transparency film and label sheets. Using other
than SHARP recommended paper may result in misfeeds or smudges on
the output. If other than SHARP recommended media must be used, feed
each sheet one at a time using the bypass tray (do not attempt continuous
copying or printing).
G There are many varieties of special paper available on the market, and
some cannot be used with this machine. Before using special paper,
contact your SHARP authorized dealer.
G Before using other than SHARP recommended paper, make a test copy to
see if the paper is suitable.
2
LOADING THE PAPER TRAY
Make sure that the paper is not torn, is free of dust, and has no wrinkles
or curled edges.
Note
Raise the handle of the paper tray
and pull the paper tray out until it
stops.
1
Push the pressure plate down until it locks in place.
Push the center of the pressure plate down until it locks into place.
2
15
Download from Www.Somanuals.com. All Manuals Search And Download.
LOADING PAPER
Fan the paper and insert it into the tray. Make sure that the
edges go under the corner hooks.
3
• Do not load paper above the maximum height line (
Exceeding the line will cause a paper misfeed.
).
Note
• If the paper is not fanned, double-feeds or misfeeds may occur.
• Make sure the stack of paper is straight before loading it. When
adding paper, take the remaining paper out and combine it into a
single stack with the new paper.
• Make sure that all the paper in the stack is the same size and type.
• When loading paper, ensure that there is no space between the
paper and the guide, and make sure that the guide is not set too
narrow and causes the paper to bend. Incorrect loading will cause the
paper to skew or misfeed.
Gently push the paper tray back into the machine.
4
• If you loaded a paper size that is different from the previously loaded
Note
paper size, change the paper size setting as explained in
"CHANGING A TRAY'S PAPER SIZE SETTING" (p.19).
• When not using the machine for an extended period, remove all
paper from the paper tray and store it in a dry place. If paper is left in
the machine for an extended period, the paper will absorb moisture
from the air, resulting in paper jams.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
BYPASS FEED (including special paper)
The bypass tray can be used to feed standard paper, transparency film, labels,
envelopes, and other special purpose paper.
Important points when inserting paper in the bypass tray
Up to 50 sheets of standard copy paper can be inserted in the bypass tray. (Capacity
will vary depending on the type of paper loaded.)
Be sure to place envelopes horizontally as shown in the following diagram.
2
Not
Available
Available
• When loading envelopes, make sure that they are straight and flat and do not have
loosely glued construction flaps (not the closure flap).
• Special papers such as SHARP recommended transparency film, labels, and
envelopes must be fed one sheet at a time through the bypass tray.
• When adding paper, first remove any paper remaining in the tray, combine it with
the paper to be added and then reload as a single stack. The paper to be added
must be the same size and type as the paper already in the tray.
• Do not use paper that is smaller than the original. This may cause smudges or
unclean images.
• Do not use paper that has already been printed on by a laser printer or plain paper
fax machine. This may cause smudges or unclean images.
Envelopes
Do not use the following envelopes, as misfeeds will occur.
• Envelopes with metal tabs, clasps, strings, holes, or windows.
• Envelopes with rough fibers, carbon paper, or glossy surfaces.
• Envelopes with two or more flaps.
• Envelopes with tape, film, or paper attached to the flap.
• Envelopes with a fold in the flap.
• Envelopes with glue on the flap to be moistened for sealing.
• Envelopes with labels or stamps.
• Envelopes that are slightly inflated with air.
• Envelopes with glue protruding from the seal area.
• Envelopes with part of the seal area peeled off.
• Be sure to select com9, com10 or Monarch in the paper size setting of the printer
driver. (For detailed information on the printer driver, refer to the online manual.)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
LOADING PAPER
Loading paper in the bypass tray
• Paper must be fed narrow side first into the feed slot.
Note
• Special papers such as transparency film, labels, and envelopes
must be fed one sheet at a time through the bypass tray.
• When copying onto transparency film, remove each copy promptly.
Do not let copies stack up.
Open the bypass tray and extend the tray.
1
To close the bypass
tray, perform step
Note
and then step
2
1
in the illustration
and push the round
projections at the
right of the tray until
they click.
Set the bypass tray paper guides to the paper width. Insert the
paper (print face down) all the way into the bypass tray.
2
3
Print face
Press the [TRAY SELECT] key (
) to select the bypass tray.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING A TRAY'S PAPER SIZE SETTING
Follow these steps to change a tray's paper size setting.
• The paper size setting cannot be changed when the machine has
stopped temporarily due to running out of paper or a misfeed.
Note
• During printing (even in copy mode), the paper size setting cannot be
changed.
Press the [MENU] key.
Press the [ ] key ( ) or [ ] key ( ) until "PAPER SIZE"
appears, and then press the [ENTER] key.
1
2
Press the [ ] key ( ) or [ ] key ( ) to
PAPER SIZE
1:TRAY1
2
select the tray, and then press the
[ENTER] key.
Press the [ ] key ( ) or [ ] key ( ) to
3
TRAY1
1:8.5X14
select the paper size, and then press the
[ENTER] key.
The paper size changes as follows each time the
[
] key (
) or [
] key (
) is pressed:
"8.5x14"→"8.5x13"→"8.5x11"→"5.5x8.5"
→"A4"→"B5"→"A5".
When you have finished configuring the tray's paper size setting,
press the [MENU] key.
Note
Squeeze the lock lever of the front guide and slide the front
guide to match the width of the paper, and move the left guide
to the appropriate slot as marked on the tray.
4
Front
guide
Left
guide
• The front guide is a slide-type guide. Grasp the locking knob on the guide
and slide the guide to the indicator line of the paper to be loaded.
• The left guide is an insert-type guide. Remove it and then insert it at the
indicator line of the paper to be loaded.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
MAKING COPIES
3
This chapter explains basic copying functions.
NORMAL COPYING
Using the document glass
• The document glass can scan up to 8-1/2" x 14" original.
• When a copy is made, the edges will not be copied (image loss). For
Note
the image loss, see the "SPECIFICATIONS" (p.94).
Open the RSPF, and place the original face down on the
document glass.
1
[How to place the original]
Align the original with the original scale and the
centering ( ) mark.
Original scale
mark
Gently close the RSPF.
2
3
Select the number of copies and other copy settings, and then
press the [START] key (
).
• To stop copying in the middle of a run, press the [CLEAR] key (
• For the copy settings, see pages 23 through 25.
).
Note
Copying books or originals with folds or creases
Press down on the RSPF while copying as shown. If
the RSPF is not completely closed, shadows may
appear on the copy or it may be fuzzy. Straight
originals with folds or creases well before placing.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING COPIES
Using the RSPF
• Originals that are 5-1/2" x 8-1/2" to 8-1/2" x 14" and 14 lbs. to 24 lbs.
(52 g/m2 to 90 g/m2) can be used. A maximum of 30 pages can be
placed at once.
Note
• Straighten curled originals before placing them in the document
feeder tray. Curled originals may cause misfeeds.
• Place originals horizontally.
• Before placing originals in the document feeder tray, be sure to
remove any staples or paper clips from them.
• When a copy is made, the edges will not be copied (image loss).
For the image loss, see the "SPECIFICATIONS" (p.94).
• When using the margin shift function, check the position of the
margins carefully. (p.34)
Make sure that an original has not been left on the document
glass.
1
2
3
Adjust the original guides to the size
of the originals.
Original face up
3
4
document feeder tray.
The RSPF indicator on the operation panel
will light up. If this indicator does not light up,
the originals are not properly set or the RSPF
is not properly closed.
Select the number of copies and other copy settings, and then
press the [START] key (
).
• The default output mode for copying from the RSPF is sort mode
(p.29), and a checkmark " " will automatically appear in the display
(p.11). If "SORT AUTO SELECT" is disabled in the user programs,
the default output mode will be non-sort mode. (p.65)
Note
• To stop copying in the middle of a run, press the [CLEAR] key (
).
• For the copy settings, see pages 23 through 25.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING COPIES
Originals that cannot be used in the RSPF
The following originals cannot be used. These may cause misfeeds or smudging and
unclear images.
• Transparencies, tracing paper, other transparent or translucent paper, and
photographs
• Carbon paper, thermal paper
• Originals that are creased, folded, or torn
• Glued originals, cut-out originals
• Originals with binder holes
• Originals printed using an ink ribbon (thermal transfer printing), originals on
thermal transfer paper
Stream feeding mode
"SET ORIGINALS FOR STREAM FEEDING" will appear in the display for five
seconds after all originals are fed. If a new original is placed in the RSPF during this
time, the original will be automatically fed in and copying will begin with the same
setting. Stream feeding mode can be disabled in "STREAM FEEDING" in the user
programs (p.63).
Capacity of paper output tray
Maximum number of pages that can
be held in the tray: 200
Paper output tray extension
When copying onto paper larger than 8-1/2" x 11" size, pull out the paper output tray
extension.
Paper holder arm
The paper output tray has a paper holder arm. The paper holder arm presses gently
on the output paper to stack it (p.9).
• The paper output tray can hold a maximum of 200 pages. If more
than 200 pages are allowed to accumulate, a paper jam may occur.
Note
• After removing paper, if you need to return the paper to the paper
output tray, lift up the paper holder arm and place the paper under the
arm.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING COPIES
Setting the number of copies
Press the numeric keys to set the number of copies.
OPY.
x11
55
The set number of copies appears in the display. A maximum of 99 copies can be set.
If you wish to make only a single copy, copying is possible with the display
showing "0".
If you enter the wrong number, press the [CLEAR] key (
enter the correct number.
) and
Note
3
SELECTING THE TRAY
Press the [TRAY SELECT] key (
).
READY TO COPY.
100%
EXTRA
Each time, you press the [TRAY SELECT] key (
the location indicated by the tray location indicator
changes in the following order : paper tray→lower
paper tray (when the 250-sheet paper feed unit is
installed.)→bypass tray.
),
The tray location indicator will blink when there is no paper in the paper
tray during operation, or when the tray is not closed properly.
Note
23
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING A COPY DARKER OR LIGHTER
Automatic exposure adjustment is initially enabled. This function automatically
adjusts the copy image according to the original being copied. If you wish to select
the exposure level yourself, follow the steps below. (Select from two original types
and five exposure levels for each original type.) The exposure level used in
automatic exposure adjustment can also be changed with "AE LEVEL ADJUST" in
the user programs (p.65).
Original types
G AUTO......Automatic exposure adjustment is enabled and the exposure is
automatically adjusted according to the original being copied. The
exposure is lowered for colored areas and background shadows.
G TEXT.......The exposure is raised for light areas and lowered for dark
backgrounds to make text easier to read.
G PHOTO ...Halftones in the photo are reproduced with greater clarity.
Place the original(s).
1
Press the [EXPOSURE] key to select the
original type.
TEXT
2
| | | |
The original image type changes as follows each
time the [EXPOSURE] key is pressed: "AUTO" →
"TEXT" → "PHOTO".
To return to auto exposure adjustment, press the [EXPOSURE] key
until "AUTO" appears.
Note
If needed, adjust the exposure level for
TEXT or PHOTO.
TEXT
3
| | | |
For a darker image, press the [
] key (
). For a
lighter image, press the [
] key ( ).
Press the [ENTER] key.
4
5
Select the number of copies and any other copy settings, and
then press the [START] key ( ).
Exposure value guidelines (When in "TEXT" setting)
Note
| | | |
Colored text or text written in pencil
Normal originals
Dark originals like newspapers
24
Download from Www.Somanuals.com. All Manuals Search And Download.
REDUCTION/ENLARGEMENT/ZOOM
Copies can be reduced down to 25% or enlarged up to 400%. (When the RSPF is
being used, the zoom copy ratio range is 50% to 200%.) The [COPY RATIO] key can
be pressed to quickly select a ratio from among eight preset ratios. In addition, the
[
] key (
) and [
] key (
) can be pressed to select the ratio in increments of
1%.
Place the original(s) and check the paper size.
Press the [COPY RATIO] key.
1
COPY RATIO
100%
2
3
-
+
3
Press the [COPY RATIO] key and/or [ ] key ( ) or [ ] key
(
) to select the desired copy ratio and then press the
[ENTER] key.
Selecting a preset ratio
8.5x14 TO 8.5x11
78%
The preset ratios change as follows each time the
[COPY RATIO] key is pressed:
-
+
"100%" → "78%" → "64%" → "50%" → "25%" →
"400%" → "200%" → "129%".
Fine adjustment of the ratio
ZOOM
The ratio can be adjusted from 25% to 400% in
increments of 1%. (When the RSPF is being used,
the zoom copy ratio range is 50% to 200%.)
-
99%
+
Use the [
] key (
) or the [
] key (
) for
fine adjustment.
• To return the ratio to 100%, press the [COPY RATIO] key until 100%
appears.
Note
• Press the [COPY RATIO] key to set the approximate ratio, then press
the [
• To decrease or increase the zoom ratio rapidly, hold down the [
key ( ) or [ ] key ( ).
] key (
) or [
] key (
).
]
The ratio will stop changing at each of the preset ratios. To continue
changing the ratio, release the key and then hold it down again.
Select the number of copies and any other copy settings, and
4
then press the [START] key (
).
The copy will be delivered to the paper output tray.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
CONVENIENT COPY
FUNCTIONS
4
AUTOMATIC TWO-SIDED COPYING
Two originals can be automatically copied onto both sides of a single sheet of paper.
When the RSPF is used, two-sided copies of two-sided originals can easily be made.
Original → Paper
Usable paper
One-sided original → Two sides
5-1/2" x 8-1/2", 8-1/2" x
11", 8-1/2" x 13",
8-1/2" x 14"
• The bypass tray
cannot be used.
Document
glass
5-1/2" x 8-1/2", 8-1/2" x
11", 8-1/2" x 13",
8-1/2" x 14"
One-sided
Two-sided
Two-sided
original →
Two sides *1
original →
original →
Two sides *1 One side
• Special paper cannot
be used.
RSPF
1
* The bypass tray
cannot be used.
When performing automatic two-sided copying of one-sided originals, the orientation
of the copied image can be selected according to the binding position of the paper.
SHORT EDGE: Select when binding the paper at the short edge.
A
A B
B
(Paper orientation: Landscape) (Paper orientation: Portrait)
LONG EDGE: Select when binding the paper at the long edge.
A
B
A B
(Paper orientation: Landscape) (Paper orientation: Portrait)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
CONVENIENT COPY FUNCTIONS
Using the document glass
Place the original that you wish to copy onto the front side of
the paper on the document glass and close the RSPF.
1
2
Press the [2-SIDED COPY] key until "1 TO
2" appears, and then press the [ENTER]
2-SIDED COPY
1 TO 2
key.
Press the [ ] key ( ) or [ ] key ( ) to
3
BINDING EDGE
LONG EDGE
select the binding edge and then press the
[ENTER] key.
Select "LONG EDGE" or "SHORT EDGE".
The "LONG EDGE" and "SHORT EDGE" are
shown in the illustration on the previous page.
Select the number of copies and any other settings, and then
4
5
4
press the [START] key (
).
"[START] : NEXT SCAN [#] : START PRINT" appears and the original is
scanned into memory.
To immediately print the scanned image, press the [
] key.
Replace the original with the next
original and close the RSPF, and
then press the [START] key (
).
Repeat step 5 until all originals have been
scanned.
Copies will be output each time two originals
have been scanned.
When the number of original pages is odd
and "[START] : NEXT SCAN [#] : START
The first original The next original
PRINT" appears, press the [
all pages have been scanned.
] key after
• If you need to clear the data scanned into memory, press the
[CLEAR] key ( ). When the [CLEAR] key ( ) is pressed, the
number of copies setting is also cleared.
• To cancel automatic two-sided copying, press the [CLEAR ALL] key
) or press the [2-SIDED COPY] key, select the "1 TO 1", and then
Note
(
press the [ENTER] key.
• If the special function sort mode was selected in step 4, copying will
not begin until the [
] key is pressed.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
CONVENIENT COPY FUNCTIONS
Using the RSPF
Place the original(s) in the RSPF. (p.21)
1
If you place an odd number of originals for one-sided to two-sided copying,
the last page will be one-sided.
Press the [2-SIDED COPY] key and select
2-SIDED COPY
2 TO 1
2
the two-sided copy mode that you wish to
use.
the [2-SIDED COPY] key: "1 TO 1", "1 TO 2", "2
TO 2", "2 TO 1"
• Two-sided copies from one-sided originals: "1 TO 2"
• Two-sided copies from two-sided originals: "2 TO 2"
• One-sided copies from two-sided originals: "2 TO 1"
Press the [ENTER] key.
3
If you selected "1 TO 2" in step 2, select "LONG EDGE" or "SHORT EDGE"
and press the [ENTER] key. LONG EDGE and SHORT EDGE are shown in
the illustration on page 26.
If you selected "2 TO 1" or "2 TO 2", press
the [ ] key ( ) or [ ] key ( ) to select
4
ORIG. SIZE ENTER
5.5x8.5
the original size and then press the
[ENTER] key.
The following original sizes can be selected:
"8.5x14", "8.5x13", "8.5x11", "5.5x8.5", "A4", "B5",
"A5".
Select the number of copies and any other settings, and then
5
press the [START] key (
).
The copy will be delivered to the paper output tray.
• To cancel automatic two-sided copying, press the [CLEAR ALL] key
Note
(
) or press the [2-SIDED COPY] key, select the "1 TO 1", and then
press the [ENTER] key.
• Do not touch the reversing tray while automatic two-sided copying is
in progress.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
SORT COPY
Copies of multiple original pages can be sorted into sets.
The number of pages that can be scanned varies depending on the
Note
original type (photo, text, etc.) and the amount of memory allocated to
changed with "MEM. FOR PRINTER" in the user programs. (p.64)
3
2
1
Sort copy
Using the document glass
Place the first original. (p.20)
1
Press the [E-SORT/SP.FUN] key until
"SORT" appears and then press the
[ENTER] key.
SPECIAL FUNCTION
SORT
2
4
Press the [ ] key ( ) to move " " to
the "ON" position and then press the
[ENTER] key.
3
SORT
ON
OFF
Select the number of copies and any other settings, and then
press the [START] key ( ).
4
5
"[START] : NEXT SCAN [#] : START PRINT" appears and the original is
scanned into memory.
Replace the original with the next original, and then press the
[START] key ( ).
Repeat step 5 until all originals have been scanned into memory.
To clear the data in memory, press the [CLEAR] key (
[CLEAR] key ( ) is pressed, the number of copies setting is also cleared.
). When the
Note
When all originals have been scanned, press the [ ] key.
The copies are delivered to the paper output tray.
6
• To cancel the sort copy job, press the [CLEAR] key ( ).
• To cancel sort copy mode, press the [CLEAR ALL] key ( ).
Note
29
Download from Www.Somanuals.com. All Manuals Search And Download.
CONVENIENT COPY FUNCTIONS
Using the RSPF
Place the originals. (p.21)
1
• If "SORT AUTO SELECT" is enabled in the user programs, the default output
Note
mode for copying from the RSPF is sort mode (p.65). In this case go directly
to step 4. A checkmark " " will automatically appear in the display (p.11).
• If "SORT AUTO SELECT" is disabled, the default output mode will be non-
sort mode. Follow the steps below to select sort mode.
Press the [E-SORT/SP.FUN] key until
"SORT" appears and then press the
[ENTER] key.
2
SPECIAL FUNCTION
SORT
Press the [ ] key ( ) to move " " to
the "ON" position and then the [ENTER]
key.
3
4
SORT
ON
OFF
Select the number of copies and any other settings, and then
press the [START] key (
).
The copies are delivered to the paper output tray.
• To cancel the sort copy job, press the [CLEAR] key ( ).
• To cancel sort copy mode, press the [CLEAR ALL] key ( ).
Note
If the memory becomes full
• If the memory becomes full while scanning the originals, "MEMORY FULL, PRESS
START TO RESUME" will appear in the display, and the machine will stop copying.
• To copy the originals that have been scanned up to that point, press the [START]
key ( ).
• To clear the data that has been scanned into memory, press the [CLEAR ALL] key
(
) or the [CLEAR] key ( ).
Offset function during sort copy
The offset function shifts the position of each set of copies in the paper output tray
for easy separation.
The offset function can be changed with "OFFSET FUNCTION" in the user
programs. (p.63)
3
3
2
2
1
1
When offset function is disabled
Offset function
30
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYING MULTIPLE ORIGINALS ONTO A SINGLE
SHEET OF PAPER
(2 IN 1 copy)
Multiple originals can be copied onto a single sheet of paper in a selected layout
pattern.
This function is convenient for compiling multi-page reference materials into a
compact format, or for providing an overview of all pages of a document on a single
page.
Pattern 1
Pattern 2
• An appropriate ratio setting will be automatically selected based on
document glass, reduction is possible to 25%. When using the RSPF,
reduction is possible to 50%. Certain combinations of original size
and paper size may result in images being cut off.
• 2 IN 1 copying cannot be used in combination with the margin shift
copying.
• The 2 IN 1 layout pattern can be changed with "LAYOUT IN 2IN1" in
the user programs (p.63).
• The bypass tray cannot be used for 2 IN 1 copying.
Note
4
Using the document glass
Place the first original. (p.20)
1
Press the [E-SORT/SP.FUN] key until
"2IN1" appears and then press the
[ENTER] key.
2
SPECIAL FUNCTION
2IN1
Press the [ ] key ( ) to move " " to
the "ON" position and then press the
[ENTER] key.
3
2IN1
ON
OFF
31
Download from Www.Somanuals.com. All Manuals Search And Download.
CONVENIENT COPY FUNCTIONS
Press the [ ] key ( ) or [ ] key ( ) to
select the original size and then press the
[ENTER] key.
4
ORIG. SIZE ENTER
5.5x8.5
The following original sizes can be selected:
"8.5x14", "8.5x13", "8.5x11", "5.5x8.5", "A4", "B5",
"A5".
Select the number of copies and any other settings, and then
press the [START] key ( ).
5
6
"[START] : NEXT SCAN [#] : START PRINT" appears and the original is
scanned into memory.
To immediately print the scanned image, press the [
] key.
Replace the original with the next original, and then press the
[START] key ( ).
Repeat step 6 until all originals have been scanned.
Copies will be output each time two originals have been scanned.
When the number of original pages is odd and "[ START] : NEXT SCAN [#]
: START PRINT" appears, press the [
scanned.
] key after all pages have been
• To clear the data in memory, press the [CLEAR] key (
).
Note
When the [CLEAR] key (
setting is also cleared.
) is pressed, the number of copies
• To cancel 2 IN 1 copying, press the [CLEAR] key (
).
• To cancel 2 IN 1 copy mode, press the [CLEAR ALL] key (
).
32
Download from Www.Somanuals.com. All Manuals Search And Download.
CONVENIENT COPY FUNCTIONS
Using the RSPF
Place the originals. (p.21)
1
2
Press the [E-SORT/SP.FUN] key until
"2IN1" appears and then press the
[ENTER] key.
SPECIAL FUNCTION
2IN1
Press the [ ] key ( ) to move " " to
the "ON" position and then press the
[ENTER] key.
3
2IN1
ON
OFF
Press the [ ] key ( ) or [ ] key ( ) to
select the original size and then press the
[ENTER] key.
The following original sizes can be selected:
"8.5x14", "8.5x13", "8.5x11", "5.5x8.5", "A4", "B5",
"A5".
4
4
5
ORIG. SIZE ENTER
5.5x8.5
Select the number of copies and any other settings, and press
the [START] key ( ).
The copy is delivered to the paper output tray.
• To cancel 2 IN 1 copying, press the [CLEAR] key (
• To cancel 2 IN 1 copy mode, press the [CLEAR ALL] key (
).
Note
).
33
Download from Www.Somanuals.com. All Manuals Search And Download.
CREATING MARGINS WHEN COPYING
(Margin shift)
The margin shift function is used to automatically shift the text or image or the copy
paper approximately 1/2".
As shown below, LONG EDGE or SHORT EDGE can be selected.
AB
SHORT EDGE
LONG EDGE
RSPF
AB
AB
Margin
Margin
A B
Copy
Document glass
Original
• This feature cannot be used with the 2 IN 1 feature.
• The margin width can be changed with "MARGIN WIDTH" in the user
programs. (p.64)
Note
• Note that a margin is created by shifting the image, and thus if the
image is shifted too far, the edge of the image may be cut off.
Place the original(s).
1
2
Press the [E-SORT/SP.FUN] key until
"MARGIN SHIFT" appears and then press
the [ENTER] key.
SPECIAL FUNCTION
MARGIN SHIFT
34
Download from Www.Somanuals.com. All Manuals Search And Download.
CONVENIENT COPY FUNCTIONS
Press the [ ] key ( ) to move " " to
the "ON" position and then press the
[ENTER] key.
3
4
MARGIN SHIFT
ON
OFF
Press the [ ] key ( ) or [ ] key ( ) to
select the margin position and then press
the [ENTER] key.
Select "LONG EDGE" or "SHORT EDGE".
For the margin position, see the previous page.
MARGIN SHIFT
LONG EDGE
Select the number of copies and any other settings, and then
5
press the [START] key (
).
The copy is delivered to the paper output tray.
• To cancel margin shift copying, press the [CLEAR] key (
• To cancel margin shift mode, press the [CLEAR ALL] key (
).
Note
4
).
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
SET UP THE SOFTWARE
5
This chapter explains how to install and configure the software that is required for the
printer and scanner functions of the machine. The procedure for viewing the Online
Manual is also explained.
• The screen images in this manual are mainly for Windows XP. With
other versions of Windows, some screen images may be different
Note
from those in this manual.
• This manual refers to the CD-ROM that accompanied the machine
simply as "CD-ROM".
SOFTWARE FOR FO-DC550
The CD-ROM that accompanies the machine contains the following software:
MFP driver
Printer driver
The printer driver enables you to use the printer function of the machine.
The printer driver includes the Print Status Window*. This is a utility that monitors
the machine and informs you of the printing status, the name of the document
currently being printed, and error messages.
* When the machine is connected through the parallel port, the Print Status Window
can only be used when the parallel port is set to ECP mode. To set the parallel port
mode, refer to your computer manual or ask the manufacturer of your computer.
Scanner driver (USB only)
The scanner driver allows you to use the scanning function of the machine with
TWAIN-compliant and WIA-compliant applications.
Sharpdesk
Sharpdesk is an integrated software environment that makes it easy to manage
documents and image files, and launch applications.
Button Manager
Button Manager allows you to use the scanner menus on the machine to scan a document.
The scanning feature can only be used with computers that are running
Windows 98/Me/2000/XP and are connected to the machine by a USB
Note
cable. If you are running Windows 95/NT 4.0 or are connected to the
machine by a parallel connection, only the printer function can be used.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE INSTALLATION
Hardware and software requirements
Check the following hardware and software requirements in order to install the
software.
Computer type
IBM PC/AT or compatible computer equipped with a
USB2.0* /1.1* or bi-directional parallel interface
(IEEE1284)
1
2
3 4
Windows 95, Windows 98, Windows Me, Windows NT
Operating system* *
5
Workstation 4.0 (ServicePack 5 or later)* , Windows 2000
5
5
Professional* , Windows XP Professional* , Windows XP
5
Home Edition*
Display
800 x 600 dots (SVGA) display with 256 colors (or better)
Hard disk free space 150MB or more
Other hardware
requirements
An environment on which any of the operating systems
listed above can fully operate
*1 The machine's USB connector will transfer data at the speed specified by the USB 2.0
(Hi-Speed) only if the Microsoft USB 2.0 driver is preinstalled in the computer, or if the
USB 2.0 driver for Windows 2000 Professional/XP that Microsoft provides through its
"Windows Update" is installed.
*2 Compatible with Windows 98, Windows Me, Windows 2000 Professional, Windows XP
Professional or Windows XP Home Edition preinstalled model standardly equipped with
a USB port.
*3 Printing is not available in MS-DOS mode.
5
*4 The machine does not support printing from a Macintosh environment.
*5 Administrator's rights are required to install the software using the installer.
Installation environment and usable software
The following table shows the drivers and software that can be installed for each
version of Windows and interface connection method.
MFP Driver
Button
Cable
Operating system
Windows
98/Me/2000/XP
Windows 95/98/Me/
NT 4.0/2000/XP
Sharpdesk
Printer
driver
Scanner
driver
Manager
Available
1
USB*
2
Available*
3
Parallel
Not Available*
*1 Windows 98/Me does not support USB 2.0. A USB 2.0 connection can be used in
Windows 98/Me, however, the performance will be the same as USB 1.1. The print
speed based on USB 2.0 specifications can only be attained if your computer is running
Windows 2000/XP, you are using a cable that supports USB 2.0 (USB 1.1 or USB 2.0
certified), and the cable is connected to a USB 2.0 port on your computer. If the
connection is made through a hub, the hub must support USB 2.0.
*2 The printer driver that is installed will vary depending on the type of connection
between the machine and your computer.
3
*
Although it is possible to install Button Manager and Sharpdesk on Windows
98/Me/2000/XP, neither Button Manager nor the scanner function of Sharpdesk can
actually be used.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING THE SOFTWARE
• If you need to use a different connection method after installing the
Note
software based on a USB or parallel connection, you must first
uninstall the software (See "Removing the software" on page 78) and
then install it using the new connection method.
• In the following explanations it is assumed that the mouse is
configured for right hand operation.
• The scanner feature only works when using a USB cable.
• If an error message appears, follow the instructions on the screen to
solve the problem. After the problem is solved, the installation
procedure will continue. Depending on the problem, you may have to
click the "Cancel" button to exit the installer. In this case, reinstall the
software from the beginning after solving the problem.
STANDARD INSTALLATION (USB only)
The procedure for a standard installation of the software is explained below. If the
machine is connected by a USB cable, it is recommended that you use the standard
installation.
The standard installation can only be used when the machine is
connected by a USB cable. If the machine is connected by a parallel
Note
cable, use the custom installation procedure (p.40).
The USB cable must not be connected to the machine. Make
sure that the cable is not connected before proceeding.
1
If the cable is connected, a Plug and Play window will appear. If this
happens, click the "Cancel" button to close the window and disconnect the
cable.
The cable will be connected in step 9.
Note
Insert the CD-ROM into your computer's CD-ROM drive.
2
3
Click the "start" button, click "My Computer" ( ), and then
double-click the CD-ROM icon ( ).
In Windows 98/Me/2000, double-click "My Computer", and then double-click
the CD-ROM icon.
Double-click the "setup" icon ( ).
4
If the language selection screen appears after you double click the
Note
"setup" icon, select the language that you wish to use and click the
"Next" button. (Normally the correct language is selected
automatically.)
38
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP THE SOFTWARE
The "SOFTWARE LICENSE" window will appear. Make sure
that you understand the contents of the software license, and
then click the "Yes" button.
5
Read the "Readme First" in the "Welcome" window and then
click the "Next" button.
6
7
Click the "Standard"
button.
"Integrated Installer is
preparing..." will appear and
then installation of the MFP
driver, Button Manager, and
Sharpdesk will begin
automatically.
Follow the on-screen
instructions.
5
8
9
A message will appear instructing you to connect the machine to your
computer. Click the "OK" button.
If you are running Windows 2000/XP and a warning message appears
regarding the Windows logo test or digital signature, be sure to click
"Continue Anyway" or "Yes".
Caution
After the installation, a message prompting you to restart your computer
may appear. In this case, click the "Yes" button to restart your computer.
Note
Make sure that the power of the machine is turned on, and then
connect the USB cable (p.55).
Windows will detect the machine and a Plug and Play screen will appear.
If the following message appears on your computer screen, close it.
Caution
A window regarding "HI-SPEED USB Device" will then appear. Close the window.
This message appears when the machine's USB 2.0 mode is not set to
"HI-SPEED". For information on switching the USB 2.0 mode, see
Chapter 6, "PRINTER/SCANNER FUNCTIONS".
39
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP THE SOFTWARE
Follow the instructions in the plug and play window to install
10
the MFP driver.
Follow the on-screen instructions.
If you are running Windows 2000/XP and a warning message appears
regarding the Windows logo test or digital signature, be sure to click
Caution
"Continue Anyway" or "Yes".
A "USB 2.0 Composite Device" installation window may appear prior to
this procedure. In this case, follow the instructions in the window to
install the USB 2.0 Composite Device.
Note
This completes the installation of the software.
• If you installed Button Manager, set up Button Manager as explained in "SETTING
UP BUTTON MANAGER" (p.51).
CUSTOM INSTALLATION
The procedure for a custom installation of the software is explained below. Use the
custom installation procedure when the machine is connected by a parallel cable,
when the machine is used as a shared printer on a network, or when you wish to
install the MFP driver, Button Manager, or Sharpdesk separately.
Windows XP (USB/Parallel)
The USB/parallel cable must not be connected to the machine.
Make sure that the cable is not connected before proceeding.
1
If the cable is connected, a Plug and Play window will appear. If this
happens, click the "Cancel" button to close the window and disconnect the
cable.
The cable will be connected in step 14.
Note
Insert the CD-ROM into your computer's CD-ROM drive.
2
3
Click the "start" button, click "My Computer" ( ), and then
double-click the CD-ROM icon ( ).
In Windows 98/Me/2000, double-click "My Computer", and then double-click
the CD-ROM icon.
Double-click the "setup" icon ( ).
4
If the language selection screen appears after you double click the
Note
"setup" icon, select the language that you wish to use and click the
"Next" button. (Normally the correct language is selected
automatically.)
40
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP THE SOFTWARE
The "SOFTWARE LICENSE" window will appear. Make sure
that you understand the contents of the software license, and
then click the "Yes" button.
5
Read the "Readme First" in the "Welcome" window and then
click the "Next" button.
6
7
Click the "Custom"
button.
5
Click the "MFP Driver"
button.
To view detailed information on
the software, click the "Display
Readme" button.
8
The "Welcome" window will appear. Click the "Next" button.
9
41
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP THE SOFTWARE
When you are asked how
10
the printer is connected,
select "Connected to this
computer" and click the
"Next" button.
If you are using the machine as
a shared printer on a network,
select "Connected via the
network". For more information
on this setting, see "Using the
machine as a shared printer"
(p.48).
Follow the on-screen
instructions.
If you are running Windows XP and a warning message appears
regarding the Windows logo test or digital signature, be sure to click
Caution
"Continue Anyway".
You will return to the window of step 8. If you wish to install Button
Manager or Sharpdesk, click the "Utility Software" button.
11
If you do not wish to install the Utility Software, click the "Close" button and
go to step 14.
After the installation, a message prompting you to restart your computer
may appear. In this case, click the "Yes" button to restart your computer.
Note
Installing the Utility Software
Click the "Button
Manager" button.
12
To view detailed information on
the software, click the "Display
Readme" button.
Follow the on-screen
instructions.
If you wish to install
Sharpdesk, click the
"Sharpdesk" button in this
window and follow the
on-screen instructions.
• Button Manager can
Caution
only be used when the
machine is connected
by a USB cable.
• The scanner function
of Sharpdesk can only
be used when the
machine is connected
by a USB cable.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP THE SOFTWARE
If the following screen appears during installation of Sharpdesk, click
the "Skip" button or the "Continue" button as appropriate to continue the
Sharpdesk installation.
Caution
If "Skip" is selected, the Sharpdesk installation will continue without
installing Sharpdesk imaging.
If "Continue" is selected, Sharpdesk Imaging will be installed. If Imaging
overwrite Imaging for Windows.
When installation of Button Manager is finished, you will return
to the window of step 12 (p.42). Click the "Close" button.
13
14
A message will appear instructing you to connect the machine to your
computer. Click the "OK" button.
After the installation, a message prompting you to restart your computer
may appear. In this case, click the "Yes" button to restart your computer.
5
Note
Make sure that the power of the machine is turned on, and then
connect the USB/parallel cable (p.55).
Windows will detect the machine and a Plug and Play screen will appear.
If the following message appears on your computer screen, close it.
Caution
A window regarding "HI-SPEED USB Device" will then appear. Close
the window.
This message appears when the machine's USB 2.0 mode is not set to
"HI-SPEED". For information on switching the USB 2.0 mode, see
Chapter 6, "PRINTER/SCANNER FUNCTIONS".
Follow the instructions in the plug and play window to install
the MFP driver.
15
Follow the on-screen instructions.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP THE SOFTWARE
If you are running Windows XP and a warning message appears
Caution
regarding the Windows logo test or digital signature, be sure to click
"Continue Anyway".
A "USB 2.0 Composite Device" installation window may appear prior to
this procedure. In this case, follow the instructions in the window to
install the USB 2.0 Composite Device.
Note
This completes the installation of the software.
• If you installed Button Manager, set up Button Manager as explained in "SETTING
UP BUTTON MANAGER" (p.51).
The USB cable must not be connected to the machine. Make
sure that the cable is not connected before proceeding.
1
If the cable is connected, a Plug and Play window will appear. If this
happens, click the "Cancel" button to close the window and disconnect the
cable.
The cable will be connected in step 9.
Note
Perform steps 2 through 7 in "CUSTOM INSTALLATION" (p.40 -
p.41).
2
3
Click the "MFP Driver"
button.
To view detailed information on
the software, click the "Display
Readme" button.
The "Welcome" window will appear. Click the "Next" button.
4
44
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP THE SOFTWARE
When you are asked how
the printer is connected,
select "Connected to this
computer" and click the
"Next" button.
5
6
When the interface
selection screen appears,
select "USB" and click the
"Next" button.
If you are using the machine as
a shared printer on a network,
select "Connected via the
network". For more information
on this setting, see "Using the
machine as a shared printer"
(p.48).
Follow the on-screen
instructions.
5
If you are running Windows 2000 and a warning message appears
regarding the Windows logo test or digital signature, be sure to click
"Yes".
Caution
7
To install the Utility Software, see "Installing the Utility Software" (steps 12
and 13 on page 42).
If you do not wish to install the Utility Software, click the "Close" button.
A message will appear instructing you to connect the machine to your
computer. Click the "OK" button.
After the installation, a message prompting you to restart your computer
may appear. In this case, click the "Yes" button to restart your computer.
Note
Make sure that the power of the machine is turned on, and then
connect the USB cable (p.55).
Windows will detect the machine and a Plug and Play screen will appear.
8
45
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP THE SOFTWARE
Follow the instructions in the plug and play window to install
9
the MFP driver.
Follow the on-screen instructions.
If you are running Windows 2000 and a warning message appears
regarding the Windows logo test or digital signature, be sure to click
Caution
"Yes".
A "USB 2.0 Composite Device" installation window may appear prior to
this procedure. In this case, follow the instructions in the window to
install the USB 2.0 Composite Device.
Note
This completes the installation of the software.
• If you installed Button Manager, set up Button Manager as explained in "SETTING
UP BUTTON MANAGER" (p.51).
The parallel cable must not be connected to the machine. Make
sure that the cable is not connected before proceeding.
1
If the cable is connected, a Plug and Play window will appear. If this
happens, click the "Cancel" button to close the window and disconnect the
cable.
The cable will be connected in step 10.
Note
Perform steps 2 through 7 in "CUSTOM INSTALLATION" (p.40 -
p.41).
2
3
Click the "MFP Driver"
button.
To view detailed information on
the software, click the "Display
Readme" button.
In Windows 95/NT4.0,
Note
the "Utility Software"
button does not appear
and only the printer
driver can be installed.
The "Welcome" window will appear. Click the "Next" button.
4
46
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP THE SOFTWARE
When you are asked how
the printer is connected,
select "Connected to this
computer" and click the
"Next" button.
If you are using the machine as
a shared printer on a network,
select "Connected via the
network". For more information
on this setting, see "Using the
machine as a shared printer"
(p.48).
5
6
7
When the interface
selection screen appears,
select "Parallel" and click
the "Next" button.
5
Select the printer port and
whether the machine is to
be used as the default
printer, make the
selections and click the
"Next" button.
Select "LPT1" for the printer
port.
• If "LPT1" does not appear, another printer or peripheral device is
using LPT1. In this case continue the installation, and after the
installation is finished, change the port setting so that the machine
can use LPT1. This procedure is explained in "Another printer is
using the parallel port (when using a parallel cable)" on page 77.
• The "Add Network port" button is used when the machine is used as
a shared printer. (p.48) Do not click this button here.
Note
47
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP THE SOFTWARE
When the model selection window appears, select model name
8
of your machine and click the "Next" button.
Follow the on-screen instructions.
If you are running Windows 2000 and a warning message appears
Caution
"Yes".
You will return to the window of step 3. If you wish to install
Sharpdesk, click the "Utility Software" button.
9
To install the Utility Software, see "Installing the Utility Software" (steps 12
and 13 on page 42).
If you do not wish to install the Utility Software, click the "Close" button.
A message will appear instructing you to connect the machine to your
computer. Click the "OK" button.
Make sure that the power of the machine is turned on, and then
connect the parallel cable (p.56).
10
11
This completes the installation of the MFP driver.
Using the machine as a shared printer
install the MFP driver in the client computer.
• To configure the appropriate settings in the print server, see the
Note
operation manual or help file of your operating system.
"Print server" as explained here is a computer that is directly
connected to the machine, and a "Client" is any other computer that
is connected to the same network.
• When the machine is used via a network connection, only the printer
function can be used; the scanner function cannot be used.
Perform steps 2 through 7 in "CUSTOM INSTALLATION" (p.40 -
p.41).
1
48
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP THE SOFTWARE
Click the "MFP Driver"
button.
2
To view detailed information on
the software, click the "Display
Readme" button.
The "Welcome" window will appear. Click the "Next" button.
3
4
When you are asked how
the printer is connected,
select "Connected via the
network" and click the
"Next" button.
5
When you are asked to
select the printer port to
be used, click the "Add
Network Port" button.
5
49
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP THE SOFTWARE
Select the network printer
that is shared and click
the "OK" button.
6
Ask your network administrator
for the server name and printer
name of the machine on the
network.
In the printer port selection window, verify the network printer
that is shared and whether the machine is to be used as the
default printer, make the selections and click the "Next" button.
7
8
When you are asked to select the model name, select the model
that you are using and click the "Next" button.
Follow the on-screen instructions.
If you are running Windows 2000/XP and a warning message appears
regarding the Windows logo test or digital signature, be sure to click
"Continue Anyway" or "Yes".
Caution
You will return to the window of step 2. Click the "Close"
button.
9
After the installation, a message prompting you to restart your computer
may appear. In this case, click the "Yes" button to restart your computer.
Note
This completes the installation of the MFP driver.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP BUTTON MANAGER
Button Manager is a software program that works with the scanner driver to enable
scanning from the machine.
To scan using the machine, Button Manager must be linked with the scan menu on
the machine. Follow the steps below to link Button Manager to scanner events.
Windows XP
Click the "start" button, click "Control Panel", click "Printers
and Other Hardware", and then click "Scanners and Cameras".
1
Click the "SHARP FO-DC550" icon and select "Properties" from
the "File" menu.
2
In the "Properties" screen, click the "Events" tab.
3
Select "SC1:" from the
"Select an event"
pull-down menu.
4
5
51
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP THE SOFTWARE
Select "Start this
5
program" and select
"Sharp Button Manager
F" from the pull-down
menu.
Click the "Apply" button.
6
Repeat Steps 4 through 6 to link Button Manager to "SC2:"
through "SC6:".
7
Select "SC2:" from the "Select an event" pull-down menu. Select "Start this
program", select "Sharp Button Manager F" from the pull-down menu, and
then click the "Apply" button. Do the same for each ScanMenu through
"SC6:".
When the settings have been completed, click the "OK" button to close the
screen.
Button Manager is now linked to the scan menu (1 through 6).
The scan settings for each of scan menu 1 through 6 can be changed with the
setting window of Button Manager.
For the factory default settings of the scan menu and the procedures for
configuring Button Manager settings, see "Button Manager Settings" in the Online
Manual.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP THE SOFTWARE
Windows 98/Me/2000
Click the "Start" button, select "Settings", and then click
"Control Panel".
1
2
Double-click the "Scanners and Cameras" icon.
If the "Scanners and Cameras" icon does not appear in Windows Me,
click "view all Control Panel options".
Note
Select "SHARP FO-DC550" and click the "Properties" button.
3
In Windows Me, right click "SHARP FO-DC550" and click "Properties" in the
pop-up menu.
In the "Properties" screen, click the "Events" tab.
4
5
Select "SC1:" from the
"Scanner events"
pull-down menu.
5
53
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP THE SOFTWARE
Select "Sharp Button
Manager F" in "Send to
this application".
6
If other applications are shown, deselect the checkboxes for the other
applications and leave only the Button Manager checkbox selected.
Note
Click the "Apply" button.
7
8
Repeat Steps 5 through 7 to link Button Manager to "SC2:"
through "SC6:".
Select "SC2:" from the "Scanner events" pull-down menu. Select "Sharp
Button Manager F" in "Send to this application" and click the "Apply" button.
Do the same for each ScanMenu through "SC6:".
When the settings have been completed, click the "OK" button to close the
screen.
Button Manager is now linked to the scan menu (1 through 6).
The scan settings for each of scan menus 1 through 6 can be changed with the
setting window of Button Manager.
For the factory default settings of the scan menu and the procedures for
configuring Button Manager settings, see "Button Manager Settings" in the Online
Manual.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE MACHINE TO YOUR
COMPUTER
Connecting a USB cable
Follow the procedure below to connect the machine to your computer.
A USB cable for connecting the machine to your computer is not included with the
machine. Please purchase the appropriate cable for your computer.
• USB is available with a PC/AT compatible computer that was
Caution
Note
originally equipped with USB and had Windows 98, Windows Me,
Windows 2000 Professional, Windows XP Professional or Windows
XP Home Edition preinstalled.
• Do not connect the USB cable before installing the MFP driver. The
USB cable should be connected during installation of the MFP driver.
• If the machine will be connected using a USB 2.0 port of your
computer, please purchase a USB cable that supports USB 2.0.
• The machine's USB connector will transfer data at the speed
specified by the USB 2.0 (Hi-Speed) only if the Microsoft USB 2.0
driver is preinstalled in the computer, or if the USB 2.0 driver for
Windows 2000 Professional/XP that Microsoft provides through its
"Windows Update" Web page is installed.
• To obtain the fastest USB 2.0 data transfer speed, "USB2.0 MODE
SWITCH" in the machine's user programs must be set to "HI-SPEED".
For more information, see "USER PROGRAMS" (p.66).
• Use the machine's "HI-SPEED" mode only when using a computer
that is running Windows 2000/XP.
• Even when the Microsoft USB 2.0 driver is used, it may not be
possible to obtain full USB 2.0 speed if a PC card supporting USB 2.0
is used. To obtain the latest driver (which may enable a higher
speed), contact the manufacturer of your PC card.
5
• Connection is also possible using a USB 1.1 port on your computer.
However, the specifications will be USB 1.1 specifications
(Full-Speed).
Insert the cable into the USB
connector on the machine.
1
2
Insert the other end of the cable into your computer's USB port.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP THE SOFTWARE
Connecting a parallel cable
Obtain an IEEE1284 shielded parallel interface cable.
1
Insert the cable into the parallel
2
interface connector located on the
rear of the unit, and fasten with
clasps.
Insert the other end of the cable into the interface connector of
your computer.
3
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6
PRINTER/SCANNER
FUNCTIONS
6
The machine includes a USB connector and a parallel connector as standard
equipment.
When the USB connector is used, the printer and scanner functions can be used.
When the parallel connector is used, the printer function can be used.
The machine has the following features:
• High-speed data transfer (when connected to a USB 2.0 connector)
• ROPM* function
* ROPM is an acronym for "Rip Once Print Many" processing. The ROPM function stores
multiple pages of print data in memory before printing. When printing multiple copies,
this eliminates the need for the computer to repeatedly transmit the print data.
To use the machine as a printer or scanner, the printer driver or scanner driver must
first be installed as explained in the "SET UP THE SOFTWARE".
• If a problem occurs in printer or scanner mode, see the Online
Manual.
Note
• When using USB 2.0 (Hi-Speed mode), be sure to read "System
requirements for USB 2.0 (Hi-Speed mode)" (below) to verify that
your system and the machine settings are configured appropriately.
• The scanning feature is only available when Windows 98/Me/2000/
available when Windows 95/NT 4.0 or a parallel connection is used.
System requirements for USB 2.0 (Hi-Speed mode)
The following system is required to use USB 2.0 (Hi-Speed mode):
• Your computer must be running Windows XP / Windows 2000 and the Microsoft
USB 2.0 driver must be pre-installed, or the USB 2.0 driver for Windows XP /
Windows 2000 must be installed using Microsoft's Windows Update service.
• The "USB 2.0 MODE SWITCH" setting in the machine's user programs must be
set to "Hi-Speed". To change the setting, see "USB 2.0 MODE SWITCH" in the
user programs (p.66).
6
* Even when the Microsoft USB 2.0 driver is installed, some USB 2.0 expansion cards
are not capable of attaining the speed stipulated by the Hi-Speed standard. This
problem can often be fixed by installing a more recent driver for the card. To obtain
the most recent driver for your card, contact the card's manufacturer.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE PRINTER MODE
The procedure for loading paper for printing is the same as for loading copy paper.
See "LOADING PAPER" (p.14).
• Print jobs received while the machine is copying will be stored in
memory. When the copy job is finished, the print jobs will begin
Note
printing.
machine maintenance, or when a misfeed occurs or the machine
runs out of paper or toner.
BASIC PROCEDURE FOR PRINTING
The basic procedure for printing is explained in the following. To use convenient
printer functions, see the "Online Manual" or the printer driver help file.
Make sure that paper is loaded in the tray.
1
The procedure for loading paper is the same as for copying. See "LOADING
PAPER" (p.14) and make sure that the paper you wish to use is loaded.
Make sure that the paper size setting on the machine is the same as the
paper size set in the printer driver.
Note
Open the file that you wish to print and select "Print" from the
File menu.
2
Make sure that the printer driver for the machine is selected,
3
and select print settings in the printer driver.
For information on the settings in the printer driver, see the "Online Manual"
or the printer driver help file.
Click the "Print" button or the "OK" button to begin printing.
4
The print job will be delivered to the paper output tray.
Canceling a print job
Select printer mode with the [MODE SELECT] key on the
operation panel of the machine, and then press the [CLEAR]
key ( ) or the [CLEAR ALL] key ( ).
1
"CANCEL PRINT JOB?" will appear in the display. Make sure
that a checkmark appears in front of "YES" and press the
[ENTER] key.
2
For limitations on copying in print mode, scanner mode limitations, and
print mode limitations in copy and scanner mode, see "OPERATION IN
Note
COPY, PRINTER, AND SCANNER MODES" (p.60).
58
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE SCANNER MODE
The procedure for placing the original is the same as for copying. See "NORMAL
COPYING" (p.20).
Scanner mode cannot be used at the following times:
• A misfeed has occurred (paper misfeed or original misfeed in the
Note
RSPF).
• The user programs are being used.
• The tray paper size is being set.
• The machine is being used in copy mode.
• The front cover or side cover is open.
SCANNING USING THE KEYS ON THE MACHINE
When scanning is performed by this method, the application that has been set in
Button Manager will automatically start and the scanned image will be pasted into
the application.
If the machine is in copy mode, press the [MODE SELECT] key to
Note
Scanning from the operation panel of the machine
Press the [MODE SELECT] key to select
scanner mode.
1
The "SCAN" indicator lights up to indicate that
scanner mode is selected.
6
Place the original. (p.20)
2
Press the [ ] key ( ) or [ ] key ( ) to
SCAN USING:
SC1:
3
select the desired Button Manager scan
menu setting.
Press the [START] key ( ) to begin scanning.
4
Scanner mode remains selected after scanning is finished. (To change
to a different mode, use the [MODE SELECT] key.)
Note
59
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINTER/SCANNER FUNCTIONS
Button Manager scan menu
For information on Button Manager settings, see the Button Manager help file. The
names in the Button Manager menu ("xxxx" in "SC1:xxxx", etc.) can be changed.
See the online manual.
SCANNING FROM YOUR COMPUTER
The machine supports the TWAIN standard, making it possible to scan from TWAIN-
compliant applications. The machine also supports WIA (Windows Image
Acquisition), making it possible to scan from the "Scan and Camera Wizard" in
Windows XP. See the Online Manual for the procedures for TWAIN and WIA
scanning. For information on TWAIN and WIA settings, see the help file for the
scanner driver or Windows Help.
OPERATION IN COPY, PRINTER, AND SCANNER
MODES
Some operations cannot be performed simultaneously when the machine is being
used in printer mode, copy mode, or scanner mode.
Scanning Scanning
Modes
Copying
Printing
from a
from the
computer machine
Copy key input
During copying
During printing
Yes
No
Yes
No
Yes
No
No
Copy
No
1
3
3
Printer
Yes*
No
Yes*
Yes*
Scanner During scan preview/
during scanning
2
No
Yes*
No
No
1
2
*
*
During two-sided printing, the copy job begins after the print job finishes.
Printing is possible while scanning is taking place. Printing via the parallel port
begins after scanning ends.
If two-sided printing via the parallel port is taking place, scanning begins after
printing ends.
3
*
For operations that cannot be performed simultaneously in fax mode,
see the Operation Manual (for facsimile).
Note
60
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE ONLINE MANUAL
The online manual provides detailed instructions for operating the unit as a printer
and scanner. It also provides methods for dealing with printing or scanner problems.
To access the online manual, your computer must have Acrobat Reader 5.0 or later.
If this is not installed, refer to "Installing Acrobat Reader" (below).
Turn on your computer.
1
Insert the supplied CD-ROM into your CD-ROM drive.
2
Click the "start" button, click "My Computer" ( ), and then
3
double-click the CD-ROM ( ) icon.
In Windows 95/98/Me/NT 4.0/2000, double-click "My Computer" and then
double-click the CD-ROM icon.
Double-click the "Manual" folder,
4
double-click the "EnglishA" folder,
and then double-click the
"FO_DC550.pdf" icon.
The window at right will appear.
Click
to read the online manual.
5
To close the online manual, click the ( ) button located at the top-right of
the window.
• The online manual can be printed out using Acrobat Reader. It is
6
Note
useful to print out sections that you refer to frequently.
• Refer to Acrobat Reader "Help" for more details on the operation and
functions of Acrobat Reader.
Installing Acrobat Reader
Turn on your computer.
1
Insert the CD-ROM into the CD-ROM drive.
2
Click the "start" button, click "My Computer" ( ), and then
3
double-click the CD-ROM ( ) icon.
In Windows95/98/Me/NT4.0/2000, double-click "My Computer" and then
double-click the CD-ROM icon.
Double-click the "Acrobat" folder, and then double-click the
4
"ar500enu.exe" icon.
Follow the on-screen instructions to install Acrobat Reader.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7
USER SETTINGS
7
The user settings allow you to customize machine settings to better meet your
needs.
USER PROGRAMS
The user settings consist of the following items.
To change a user program setting, see "SELECTING A SETTING FOR A USER
PROGRAM" (p.67).
For the user programs in fax mode, see the Operation Manual (for
facsimile).
Note
Copy mode
Setting codes
Program
number
(factory default
setting appears
in bold)
Program name
Explanation
• Auto clear time automatically
returns the copy settings to
the initial settings (p.12) if no
keys are pressed for a preset
period of time following the
end of a copy job.
• This program is used to select
the period of time. Auto clear
time can also be disabled.
1: 10 SEC.
2: 30 SEC.
3: 60 SEC.
4: 90 SEC.
5: 120 SEC.
6: OFF
1
AUTO CLEAR
• This function automatically
switches the machine to a low
power consumption state if
the set duration of time
elapses without the machine
being used when the power is
on. The power save indicator
lights up, however, the keys
on the operation panel can be
used. Normal operation
automatically resumes when
a key on the operation panel
is pressed, an original is
placed, a print/fax job is
received.
1: 30 SEC.
2: 1 MIN.
3: 5 MIN.
2
PREHEAT MODE
4: 30 MIN.
5: 60 MIN.
6: 120 MIN.
7: 240 MIN.
• Use this setting to enable or
disable auto power shut-off
mode.
1: ON
2: OFF
3
AUTO SHUT-OFF
62
Download from Www.Somanuals.com. All Manuals Search And Download.
USER SETTINGS
Explanation
Setting codes
(factory default
setting appears
in bold)
Program
number
Program name
• This function automatically
switches the machine to a state
that consumes even less power
than preheat mode if the set
duration of time elapses without
the machine being used when
the power is on. All lights
except the power save indicator
go off. To resume normal
operation, press the [START]
1: 5 MIN.
2: 30 MIN.
3: 60 MIN.
4: 120 MIN.
5: 240 MIN.
AUTO SHUT-OFF
TIME
4
key (
). Normal operation
also resumes automatically
when a print/fax job is received
or scanning is begun from a
computer. While in auto power
shut-off mode, no keys (except
the [START] key (
used.
)) can be
• When copying using the
RSPF, while "SET ORIGINALS
FOR STREAM FEEDING."
appears in the display after an
original has been scanned
(about 5 seconds), a
subsequent original can be
placed and automatically fed
into the machine.
1: ON
5
STREAM FEEDING
LAYOUT IN 2IN1
2: OFF
• Use this setting to select the
layout pattern when two
original pages are copied onto
a single sheet of paper (see
page 31 for the layout
patterns).
1: PATTERN 1
2: PATTERN 2
6
7
7
• When enabled, this function
offsets the position of each
set of copies in the output tray
in copy mode, and each print
job in printer mode.
OFFSET
FUNCTION
1: ON
2: OFF
63
Download from Www.Somanuals.com. All Manuals Search And Download.
USER SETTINGS
Program
Setting codes
(factory default
setting appears
in bold)
Program name
Explanation
number
• When two-sided copying is
performed, this function
rotates the image on the back
of the original. This is
convenient when binding the
copies at the top (tablet
binding).
ROTATE ORIG.
IMAGE
1: ON
2: OFF
8
• This setting is used to change
the copy resolution in AUTO
and TEXT mode from 600 x
300 dpi to 600 x 600 dpi (high-
quality mode). Scanning is
slower when high-quality
mode is used.
AE/TEXT
RESOLUTION
1: 300dpi
2: 600dpi
9
• If the memory fills up when
two-sided copying is
performed, "NORMAL" can be
selected to make copying
possible. However,
"NORMAL" results in a slower
copying speed. Normally "HI-
SPEED" is selected to enable
fast two-sided copying.
2-SIDED COPY
MODE
1: HI-SPEED
2: NORMAL
10
1: 1/4"
2: 1/2"
3: 3/4"
4: 1"
• Use this setting to set the
margin width.
11
12
MARGIN WIDTH
1: 30%
2: 40%
3: 50%
4: 60%
5: 70%
• Use this to change the
proportion of machine
memory used for printer
mode.
MEM. FOR
PRINTER
• Use this setting to select
whether or not holding down a
key causes repeated input of
the key. For keys that
normally cause a set value to
decrease or increase when
held down (for example, the
AUTO KEY
REPEAT
1: ON
13
2: OFF
[
(
] key (
)), this program can be
) or [
] key
used to have the set value not
change when the key is held
down.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
USER SETTINGS
Explanation
Setting codes
(factory default
setting appears
in bold)
Program
number
Program name
• Use this setting to select how
long a key must be pressed
for the input to be accepted.
By selecting a longer time,
you can prevent settings from
being changed by the
1: NORMAL
2: 0.5 SEC.
14
KEY PRESS TIME 3: 1.0 SEC.
4: 1.5 SEC.
5: 2.0 SEC.
accidental pressing of a key.
1: LOW
KEY TOUCH
2: HIGH
• This sets the volume of beep
signals. (p.68)
15
16
SOUND
3: OFF
• Use this to sound a beep
when a base setting is
selected. (p.68)
SOUND AT
DEFAULT
1: ON
2: OFF
• This mode reduces toner
usage by about 10% when
copying. Toner save mode is
effective when the exposure
mode is AUTO or TEXT.
TONER SAVE
MODE
1: ON
2: OFF
17
• This is used to adjust the
exposure level.
• The automatic exposure level
can be adjusted separately for
the document glass and the
RSPF.
• The factory default setting for
the exposure level is center.
1: SPF/RSPF
18
19
AE LEVEL ADJUST 2: DOCUMENT
GLASS
1: AMERICAN
• This is used to set the
language used in the display.
ENGLISH
LANGUAGE
2: FRENCH
3: SPANISH
• This is used to return all
settings to the factory default
settings.
7
1: YES
RESET FACTORY
2: NO
20
21
• Use this setting to enable or
disable sort auto select mode.
SORT AUTO
SELECT
1: ON
2: OFF
65
Download from Www.Somanuals.com. All Manuals Search And Download.
USER SETTINGS
Print mode
Setting codes
(factory default
setting appears
in bold)
Program
number
Program name
Explanation
• When this function is enabled,
printing in printer mode will
automatically continue using a
different size of paper if the
specified size of paper runs
out in all trays. This feature
does not function in copy
mode.
FORCED
OUTPUT
1: ON
2: OFF
1
• This sets the USB 2.0 data
transfer speed. To obtain the
fastest speed when using the
USB 2.0 connector, first verify
that your computer meets the
system requirements
(operating system and driver),
and then use this program to
change the USB 2.0 mode to
"Hi-Speed". Note that the
setting should not be changed
while running a TWAIN driver.
(For the system requirements,
see "System requirements for
USB 2.0 (Hi-Speed mode)"
(p.57).)
USB 2.0 MODE
SWITCH*1
1: FULL-SPEED
2: HI-SPEED
2
• If the paper runs out during
printing and there is paper of
the same size in another tray,
this function automatically
switches to that tray
AUTO TRAY
SWITCH*2
1: ON
2: OFF
3
(excluding the bypass tray).
The function can be disabled.
*1 The scanning speed increases when the USB 2.0 mode is set to "HI-SPEED",
however, the printing speed does not increase considerably.
*2 When the 250-sheet paper feed unit is installed.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING A SETTING FOR A USER PROGRAM
Press the [MENU] key and then press the
[ENTER] key.
1
MAIN MENU
In printer mode, the user programs are accessed
by simply pressing the [MENU] key.
Press the [ ] key ( ) or [ ] key ( ) to
select the item that you wish to configure
2
USER PROGRAM
in the USER PROGRAM items, and then
press the [ENTER] key.
• See "USER PROGRAM" (p.62 to p.66)
for the program name and program
code.
• You can also select a program by
directly entering the program number
with the numeric keys.
Press the [ ] key ( ) or [ ] key ( ) to
3
PREHEAT MODE
1:1 MIN
change the setting of the selected item.
See "USER PROGRAM" (p.62 to p.66) for the
program code.
• If you mistakenly select the wrong item, press the [CLEAR] key
Note
(
) and repeat the procedure from step 2.
• To cancel a setting for a user program, press the [MENU] key.
Press the [ENTER] key.
4
7
Your selection appears briefly and then the previous screen appears.
When "AE LEVEL ADJUST" is selected in the user programs and the
Note
[ENTER] key is pressed, the automatic exposure adjustment screen
appears. Adjust the exposure and press the [ENTER] key.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
USER SETTINGS
Audible signals (key entry beep, invalid key beep, base setting beep)
The machine sounds three different types of beep signals: a key entry beep that
sounds when a valid key is pressed, an invalid key beep that sounds when an
invalid key is pressed, and a base setting beep that sounds when a setting is the
same as the base setting (base settings are explained below). The base setting
beep is initially disabled. If you wish to enable the base setting beep, see
"SOUND AT DEFAULT" on page 65. If you wish to change the volume of the beep
signals or disable them, see "KEY TOUCH SOUND" on page 65.
The beep patterns of each type of beep signal are as follows:
Key entry beep.....................One beep Base setting beep......... Three beeps
Invalid key beep.................Two beeps
Base settings
The base settings are preset standard selections for each copy setting. The base
settings are as follows:
Copy ratio................................... 100% Paper feed location .................Tray 1
Light and Dark level .................Center
(Upper paper tray)
AUTO/TEXT/PHOTO ................AUTO
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8
TROUBLESHOOTING AND
MAINTENANCE
8
Problems related to general use of the machine, the copy function, and software
setup are explained here. Be sure to check the problem carefully before calling for
service, as many problems can be solved by the user.
If you are unable to solve the problem, turn off the main switch, unplug the power
cord from the outlet, and contact your SHARP authorized dealer.
For problems related to the fax, printer and scanner functions, see the
corresponding operation manuals.
Note
DISPLAY MESSAGES
When the following indicators light up or blink on the operation panel or the following
alphanumeric codes appear in the display, solve the problem immediately referring
to both the table below and the indicated page.
Be sure to use only genuine SHARP parts and supplies.
Note
Indication
Lamp indicator
Cause and remedy
Page
Display
BYPASS : ADD
PAPER
TRAY<*> : ADD
PAPER
CLOSE PAPER
TRAY<*>
Tray
location Blinks
indicator
The indicated paper tray is not closed,
is closed incorrectly, or has run out of
paper. (The tray is indicated in <*>.)
15
CLEAR PAPER
JAM.
SPF/RSPF JAM.
A paper misfeed has occurred.
Remove the misfeed as explained in
"MISFEED REMOVAL".
79
-
FRONT OR SIDE
COVER OPEN.
The cover is open. Close the cover.
CLOSE COVERS.
CLOSE THE SPF/ The RSPF cover is open. Close the RSPF
82
84
RSPF COVER. cover.
REPLACE THE TD The TD cartridge is empty. Replace the
Error
CARTRIDGE.
TD cartridge with a new cartridge.
Blinks
indicator
When [L1-00] appears, the scan head
locking switch is locked. Turn off the
power, release the scan head locking
switch, and turn the power back on.
The machine will not function. Turn the
power switch off, wait about 10 seconds,
and then turn on the switch again. If this
does not clear the error, remove the
power cord from the outlet, and contact
your SHARP authorized dealer.
8
83
-
SYSTEM ERROR
[XX - XX] REFER
TO USER GUIDE
69
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING AND MAINTENANCE
Indication
Cause and remedy
Page
Lamp indicator
Display
INSTALL A TD
CARTRIDGE.
The TD cartridge is not installed
correctly. Reinstall the TD cartridge.
84
Blinks
REPLACE THE
DRUM
The drum cartridge has reached the
end of its life. Replace it with a new
drum cartridge.
87
91
CARTRIDGE.
Error
indicator
TD CARTRIDGE Toner is low. Purchase a new TD
IS NEAR EMPTY. cartridge.
Steadily
lit
A DRUM
Less than 1000 sheets can be printed
CARTRIDGE WILL
with the current drum cartridge.
BE NEEDED
SOON.
91
30
Purchase a new drum cartridge.
MEMORY FULL, PRESS START TO Data is being held in memory. Print the
RESUME. data or clear it from memory.
NO 2-SIDED COPY FROM BYPASS Two sided printing or 2 IN 1 copying is
TRAY.
selected when the bypass tray is
already selected, or the bypass tray is
selected when two-sided printing or 2
IN 1 copying is already selected.
The bypass tray cannot be used. Press
the [TRAY SELECT] key ( ) to select
a paper tray.
26
31
NO 2IN1 COPY FROM
BYPASS TRAY.
2 IN 1 copy and margin shift cannot be
used in combination. Cancel the
function that was selected last.
NO 2IN1 COPY WITH MARGIN
SHIFT.
31
34
COPY RATIO CAN NOT BE
CHANGED IN 2IN1.
Copy ratio can not be changed in 2 IN 1
copy.
25
31
This appears if you attempt to change
THIS MENU IS NOT SELECTABLE
WITH DATA.
a user program setting while a print job 62
is in progress.
There is no paper for printing. Press
the [MODE SELECT] key to switch to
NO XXXX SIZE TRAY
printer mode and follow the instructions
in the display.
-
("XXXX" indicates paper size)
An original remains on the document
glass, or the original is too thick to
scan. Remove the original.
21
If the message is not cleared when
there is no original on the document
glass, the underside of the RSPF is
dirty. Clean the underside of the RSPF
(especially areas where black lines
appear).
CHECK SPF/RSPF.
START TO RESUME.
89
Printing is not possible if the paper size
setting is different from the size of
paper loaded in the tray. Load the
same size of paper as the paper size
setting and then press the [START] key
LOAD XXXX PAPER INTO TRAY<*>.
15
55
(
). Printing will begin.
("XXXX" indicates paper size. The tray
is indicated in <*>.)
The machine is not correctly connected
to the computer. Check the cable
(when using the scanner function).
NO PC COMMUNICATION; CHECK
CABLE.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING THE MACHINE
The following problems are related to the general operation of the machine and
copying.
Problem
Cause and solution
Page
The machine is not plugged into a
power outlet.
→ Plug the machine into a grounded outlet.
-
Power switch OFF.
12
-
→ Turn the power switch ON.
The power save indicator is blinking.
Indicates that the machine is warming
up.
→ Copies cannot be made until the
machine has finished warming up.
The machine does not
operate.
The front cover or the side cover is not
completely closed.
→ Close the front cover or the side cover.
-
The machine is in auto power shut-off
mode.
→ In auto power shut-off mode, all lights
13
83
24
are off except the power save indicator.
Press the [START] key (
normal operation.
) to resume
The scan head locking switch is locked.
→ Unlock the scan head locking switch.
Select the correct original type for the
original.
→ Select AUTO with the [EXPOSURE]
key or press the [
] key (
) or [
]
key (
) to manually select an
Copies are too dark or
too light.
appropriate exposure.
→ If the copy is too light or too dark even
though AUTO was selected with the
[EXPOSURE] key, adjust the automatic
exposure level.
65
The original is not placed face up in the
RSPF or face down on the document
glass.
8
Blank copies.
20, 21
→ Place the original face up in the RSPF
or face down on the document glass.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING AND MAINTENANCE
Problem Cause and solution
Page
The original was not placed in the
correct position.
→ Place the original correctly.
20, 21
An appropriate ratio was not used for
the size of the original and the size of
the paper.
25
Part of the image is cut → Press the [COPY RATIO] key to change
off or there is too much
blank space.
the ratio to a setting that is suitable for
the original and the copy paper.
The size of paper loaded in the tray was
changed without changing the tray's
paper size setting.
→ Be sure to change the tray's paper size
setting whenever you change the size
of paper loaded in the tray.
19
14
The paper is outside of the specified
size and weight range.
→ Use copy paper within the specified
range.
Wrinkles appear in the
paper or the image
disappears in places.
Paper curled or damp.
→ Do not use curled or crimped paper.
Replace with dry copy paper. During
periods when the machine is not used
for a long time, remove the paper from
the tray and store it in a dark place in a
bag to prevent moisture absorption.
-
The document glass or the underside of
the RSPF is dirty.
89
-
Copies are smudged or
dirty.
→ Clean regularly.
Original smudged or blotchy.
→ Use a clean original.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING AND MAINTENANCE
Problem
Cause and solution
Misfeed occur.
Page
→ To remove the misfeed, see "MISFEED
79
REMOVAL".
The paper is outside of the specified
size and weight range.
14
→ Use copy paper within the specified
range.
Paper curled or damp.
→ Do not use curled or crimped paper.
Replace with dry copy paper. During
periods when the machine is not used
for a long time, remove the paper from
the tray and store it in a dark place in a
bag to prevent moisture absorption.
-
Paper is not loaded properly.
→ Make sure that the paper is properly
loaded.
15
80
Paper misfeed.
Pieces of paper inside machine.
→ Remove all pieces of misfed paper.
Too much paper is loaded in the tray.
→ If the stack of paper is higher than the
indicator line on the tray, remove some
of the paper and reload so that the
stack does not exceed the line.
15
Some sheets of paper stick together.
15
18
→ Fan the paper well before loading it.
The guides on the bypass tray do not
match the width of the paper.
→ Adjust the guides to match the width of
the paper.
The bypass tray extension is not
opened.
18
→ When loading a large size of paper,
open the extension.
The scanner glass for the RSPF is dirty.
→ Clean the long, narrow scanning
window.
89
90
8
White or black lines
appear on copies.
The transfer charger is dirty.
→ Clean the transfer charger.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING AND MAINTENANCE
Problem
Cause and solution
Page
Copying or printing is performed.
→ Set the paper size after copying or
printing is complete.
-
Paper size for a paper
tray cannot be set.
The machine has stopped temporarily
due to running out of paper or a
misfeed.
15, 19,
79
→ Load paper or remove the misfeed, and
then set the paper size.
"MEMORY FULL, PRESS START TO
RESUME." appears in the display.
→ The memory became full during sort
copy. Copy only the originals that have
been scanned to that point, or cancel
the job and clear the data from
memory.
30
A copy job stops before
it is finished.
The tray is out of paper.
15
13
→ Load paper.
Other indicators are lit.
→ If other indicators are lit, the machine is
in preheat mode. Press any key on the
operation panel to resume normal
operation.
The power save
indicator is lit.
Only the power save indicator is lit.
→ If only the power save indicator is lit, the
machine is in auto power shut-off
13
69
-
mode. Press the [START] key (
resume normal operation.
) to
See "DISPLAY MESSAGES" to check
the meaning of the error indicator and
error message in the display, and take
appropriate action.
Error indicator (
lit or blinking.
) is
The same power outlet is used for the
lighting fixture and the machine.
Lighting fixture flickers. → Connect the machine to a power outlet
which is not used for other electric
appliances.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEMS DURING SETUP OF THE SOFTWARE
If the software does not install correctly, check the following items on your computer.
To remove the software, see "Removing the software" (p.78).
MFP driver cannot be installed (Windows 2000/XP)
If the MFP driver cannot be installed in Windows 2000/XP, follow these steps to
check your computer's settings.
Click the "start" button and then click "Control Panel".
1
In Windows 2000, click the "Start" button, select "Settings", and then click
"Control Panel".
Click "Performance and Maintenance", and then click
"System".
2
In Windows 2000, double-click the "System" icon.
Click the "Hardware" tab and then click the "Driver Signing"
button.
3
Check "What action do you
4
want Windows to take?" ("File
signature verification" in
Windows 2000).
If "Block" has been selected, it will
not be possible to install the MFP
driver. Select "Warn" and then
install the MFP driver as explained
in "INSTALLING THE
SOFTWARE".
8
75
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING AND MAINTENANCE
Plug and play screen does not appear (USB only)
If the Plug and Play screen does not appear after you connect the machine to your
computer with a USB cable and turn on the machine, follow the steps below to verify
that the USB port is available.
Click the "start" button, click "Control Panel", and then click
1
"Performance and Maintenance".
In Windows 98/Me/2000, click the "Start" button, select "Settings", and then
click "Control Panel".
Click "System", click the "Hardware" tab, and click the "Device
2
Manager" button.
"Universal Serial Bus controllers" will appear in the list of devices.
• In Windows 98/Me, double-click the "System" icon and click the
"Device Manager" tab.
Note
• In Windows 2000, double-click the "System" icon, click the
"Hardware" tab, and click the "Device Manager" button.
• If the "System" icon does not appear in Windows Me, click "view all
Control Panel options".
Click the
icon beside "Universal Serial Bus controllers".
3
4
Two items should appear: your controller chipset type and Root Hub. If
these items appear, you can use the USB port. If the "Universal Serial Bus
controllers" shows a yellow exclamation point or does not appear, you must
check your computer manual for USB troubleshooting or contact your
computer manufacturer.
Once you have verified that the USB port is enabled, install the
software as explained in "INSTALLING THE SOFTWARE".
76
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING AND MAINTENANCE
The MFP driver cannot be correctly installed by Plug and
Play (Windows 2000/XP) (USB only)
In Windows 2000/XP, if the MFP driver cannot be correctly installed by Plug and
Play (for example, Plug and Play takes place without copying the required files for
the MFP driver installation), follow these steps to remove unneeded devices and
then install the MFP driver as explained in "SET UP THE SOFTWARE" (p.36).
Click the "start" button, click "Control Panel", and then click
"Performance and Maintenance".
1
In Windows 2000, click the "Start" button, select "Settings", and then click
"Control Panel".
Click "System", click the "Hardware" tab, and click the "Device
Manager" button.
2
In Windows 2000, double-click the "System" icon, click the "Hardware"
tab, and click the "Device Manager" button.
Note
Click the
devices".
icon beside "Other
3
4
If "FO-DC550" and "SHARP FO-
DC550" appear, select and delete
both of these items.
If "Other devices" does not appear, close the "Device Manager"
window.
Note
Install the software as explained in "INSTALLING THE
SOFTWARE".
Another printer is using the parallel port (when using a
parallel cable)
If another printer is using the parallel port and printing is not possible using the
machine, follow the steps below to change the port setting of the other printer driver,
and make sure that the port of the printer driver for the machine is set to LPT1.
Click the "start" button, click "Control Panel", click "Printers
1
and Other Hardware", and then click "Printers and Faxes".
In Windows 95/98/Me/NT 4.0/2000, click the "Start" button, select
"Settings", and then click "Control Panel".
8
Click the icon of the printer driver for which you wish to change
the port setting, and select "Properties" from the "File" menu.
2
Click the "Ports" tab.
3
In Windows 95/98/Me, click the "Details" tab.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING AND MAINTENANCE
Select "FILE:" in the "Print to the following port" list box, and
click the "OK" button.
4
Click the "SHARP FO-DC550" printer driver icon and select
"Properties" from the "File" menu.
5
Click the "Ports" tab.
6
In Windows 95/98/Me, click the "Details" tab.
Select "LPT1" in the "Print to the following port" list box, and
click the "OK" button.
7
In the event that you need to use the other printer, repeat the above
steps to set the port of the machine to "FILE:", and change the port
Note
setting of the other printer back to "LPT1".
Removing the software
If you need to remove the software, follow these steps.
Click the "start" button and then click "Control Panel".
1
In Windows 95/98/Me/NT 4.0/2000, click the "Start" button, select
"Settings", and then click "Control Panel".
Click "Add or Remove Programs".
2
In Windows 95/98/Me/NT 4.0/2000, double-click the "Add/Remove
Programs" icon.
Select "SHARP FO-DC550 Series MFP Driver" and Button
3
Manager from the list, and remove the software.
For more information, refer to your operating manual or to the help files for
your operating system.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
MISFEED REMOVAL
When a misfeed occurs, the error indicator blinks, "CLEAR PAPER JAM" appears in
the display, and the machine stops copying or printing. If a misfeed occurs when
using the RSPF, "RETURN X ORIGINAL(S) START TO RESUME" will appear in the
display. ("X" indicates the number of pages to be returned.) This indicates the
number of the originals that must be returned to the document feeder tray after a
misfeed. Return the required number of originals. This number will be cleared when
copying is resumed or the [CLEAR] key (
) is pressed. If an original misfeed
occurs in the RSPF, the machine will stop and the error indicator will blink. To
remove a misfeed from the RSPF, see "D: Misfeed in the RSPF" (p.82).
Open the bypass tray, and
then open the side cover.
1
Check the misfeed location. Remove the misfed paper
2
following the instructions for each location in the illustration
below. If the error indicator blinks, proceed to "A: Misfeed in
the paper feed area" (p.80).
If the misfed paper is seen from
this side, proceed to "C: Misfeed
in the transport area" (p.81).
If paper is misfed here, proceed to "B:
Misfeed in the fusing area" (p.80).
8
If paper is misfed here, proceed to "A:
Misfeed in the paper feed area" (p.80).
79
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING AND MAINTENANCE
A: Misfeed in the paper feed area
Gently remove the misfed paper from the paper feed area as
1
shown in the illustration. If the error indicator blinks and the
misfed paper is not visible in the paper feed area, pull out the
paper tray and remove the misfed paper. If the paper cannot be
removed, proceed to "B: Misfeed in the fusing area".
The fusing unit is hot. Do not touch the fusing unit when
removing misfed paper. Doing so may cause a burn or other
Warning
injury.
• Do not touch the surface (green portion) of the drum cartridge when
removing the misfed paper. Doing so may damage the drum cartridge
and cause smudges on copies.
Caution
• If the paper has been fed through the bypass tray, do not remove the
misfed paper through the bypass tray. Toner on the paper may stain
the paper transport area, resulting in smudges on copies.
Close the side cover by pressing the round projections near
the side cover open button. The error indicator will go out and
the ready indicator will light up.
2
B: Misfeed in the fusing area
Lower the fusing unit release
lever.
1
Fusing unit release lever
80
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING AND MAINTENANCE
Gently remove the misfed paper
from under the fusing unit as shown
in the illustration. If the paper cannot
be removed, proceed to "C: Misfeed
in the transport area".
2
The fusing unit is hot. Do not touch the fusing unit when
removing misfed paper. Doing so may cause a burn or other
injury.
Warning
• Do not touch the surface (green portion) of the drum cartridge when
removing the misfed paper. Doing so may cause damage the drum
cartridge and smudges on copies.
Caution
• Do not remove the misfed paper from above the fusing unit. Unfixed
toner on the paper may stain the paper transport area, resulting in
smudges on copies.
Raise the fusing unit release lever and then close the side
cover by pressing the round projections near the side cover
open button. The error indicator will go out and the ready
indicator will light up.
3
C: Misfeed in the transport area
Lower the fusing unit release lever.
1
See "B: Misfeed in the fusing area" (p.80).
Open the front cover.
2
To open the front cover, see "TD CARTRIDGE REPLACEMENT" (p.84).
Rotate the roller rotating
3
Roller rotating
knob
knob in the direction of the
arrow and gently remove the
misfed paper from the exit
area.
8
81
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING AND MAINTENANCE
Raise the fusing unit release lever, close the front cover and
4
then close the side cover by pressing the round projections
near the side cover open button. The error indicator will go out
and the ready indicator will light up.
When closing the covers, be sure to close the front cover securely and
then close the side cover. If the covers are closed in the wrong order,
the covers may be damaged.
Caution
D: Misfeed in the RSPF
An original misfeed may occur at one of three locations: if the misfed original is visible
in the document feeder tray, (A) in the document feeder tray; if the misfed original is
not visible in the document feeder tray, (B) in the exit area or (C) under the document
feeder cover. Remove the misfed original following the instructions for each location.
(A) Open the document feeder cover and pull the original gently to the left and
out from the document feeder tray. Close the document feeder cover. Open
and close the RSPF to clear the error indicator. If the misfed original cannot
be easily removed, proceed to (C).
Document feeder cover
(B) Open the RSPF and rotate the roller to remove the misfed original from the
exit area. If the misfed original cannot be easily removed, proceed to (C).
Roller
If the original is a two-sided original, pull out the reversing tray to remove the
misfed original.
Reversing tray
After removing a misfed original from the exit area of the RSPF, be sure
to insert the reversing tray into the exit area until it locks in place.
Note
82
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING AND MAINTENANCE
(C) If the original does not move easily into the exit area, remove it in the
direction of the arrow while rotating the roller.
Open and close the RSPF to clear the error indicator. "RETURN X
ORIGINAL(S) START TO RESUME" will appear in the display. Return
Note
the indicated number of pages to the document feeder tray. Press the
[START] key (
) to resume copying.
SCAN HEAD LOCKING SWITCH
The scan head locking switch is under the original table. If the switch is locked ( ),
the unit will not operate. Unlock the switch (
) as shown below.
Grasp here and turn in
the direction of the arrow.
Lock
Unlock
8
83
Download from Www.Somanuals.com. All Manuals Search And Download.
TD CARTRIDGE REPLACEMENT
When toner is low, the error indicator will light up and "TD CARTRIDGE IS NEAR
EMPTY" will appear in the display. For information on purchasing a new TD
cartridge, see "ABOUT SUPPLIES" (p.91). If copying is continued while the indicator
is lit, copies will gradually become lighter until the toner runs out. When the toner
runs out, the machine will stop copying or printing, the error indicator will blink, and
"REPLACE THE TD CARTRIDGE" will appear in the display. Follow the procedure
below to replace the TD cartridge.
• After the machine stops, it may be possible to make a few more
copies by taking the TD cartridge out of the machine, shaking it
Note
horizontally, then reinstalling it. If copying is not possible after this
operation, replace the TD cartridge.
• During a long copy run of a dark original, "TONER
REPLENISHMENT IN PROGRESS" appears in the display, and the
machine may stop even though toner is left. The machine will feed
toner up to 2 minutes and then the ready indicator will light up. Press
the [START] key (
) to resume copying.
Open the bypass tray, and
then open the side cover
while pressing the side
cover open button.
1
2
Push gently on both sides of
the front cover to open the
cover.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING AND MAINTENANCE
Gently pull the TD cartridge
out while pressing the lock
release button.
3
Lock release button
• After removing the TD cartridge, do not shake it or tap on it. Doing so
may cause toner to leak from the cartridge. Put the old cartridge
immediately in the bag contained in the box of the new cartridge.
• Dispose of the old TD cartridge in accordance with local regulations.
Note
Remove the TD cartridge from the bag. Remove the protective
paper. Hold the cartridge on both sides and shake it
horizontally four or five times. Hold the tab of the protective
cover and pull the tab to your side to remove the cover.
4
5
4 or 5 times
While pushing the lock release button,
gently insert the TD cartridge until it
locks into place.
Lock release button
8
85
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING AND MAINTENANCE
Close the front cover and
6
then the side cover by
pressing the round
projections near the side
cover open button. The error
indicator will go out and the
ready indicator will light up.
7
When closing the covers, be sure to close the front cover securely and
then close the side cover. If the covers are closed in the wrong order,
the covers may be damaged.
Caution
86
Download from Www.Somanuals.com. All Manuals Search And Download.
DRUM CARTRIDGE REPLACEMENT
The useful life of the drum cartridge is approximately 18,000 copies*. When the
internal counter reaches approximately 17,000 copies, the error indicator will light up
and "A DRUM CARTRIDGE WILL BE NEEDED SOON" will appear in the display.
(p.91). When the error indicator blinks and "REPLACE THE DRUM CARTRIDGE"
appears in the display, the machine will stop copying or printing until the cartridge is
replaced. Replace the drum cartridge at this time.
* Based on copying onto letter size paper at 5% toned area.
Do not remove the protective cover on the drum portion (black paper) of
a new drum cartridge before use. The cover protects the drum against
Note
external light.
Remove the TD cartridge (see "TD CARTRIDGE
REPLACEMENT" (p.84)).
1
Hold the drum cartridge handle and
gently pull the cartridge out. Dispose
of the old drum cartridge in
Drum cartridge handle
2
accordance with local regulations.
Remove the new drum cartridge from the protective bag and
remove the protective cover from the cartridge. Gently install
the new drum cartridge.
3
Do not touch the surface of the drum (green portion).
Note
8
Gently install the TD cartridge. To install the TD cartridge, see
"TD CARTRIDGE REPLACEMENT" (p.84)
4
87
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING AND MAINTENANCE
Close the front cover and then the side cover by pressing the
5
round projections near the side cover open button. The drum
replacement required error indicator will go out and the ready
indicator will light up.
When closing the covers, be sure to close the front cover securely and
then close the side cover. If the covers are closed in the wrong order,
Note
the covers may be damaged.
CHECKING THE TOTAL COUNT
You can check the total number of pages output by the machine (all pages printed by
the copy function and printer function), as well as the output counts of each function
(number of copies, number of scanned pages, number of faxes, etc.). When a count
reaches 999,999 it returns to 0.
Press the [MENU] key.
Press the [ ] key ( ) or [ ] key (
MAIN MENU
3:TOTAL COUNT
1
)
until "TOTAL COUNT" appears, and then
press the [ENTER] key.
Press the [ ] key ( ) or [ ] key ( ) to
display the count of each function.
2
TOTAL OUTPUT
012,345
The count of each function changes as follows each the [
] key ( )is pressed:
] key (
) or
[
• "TOTAL OUTPUT":
Total number of pages output by the
machine
• "COPIES":
• "SPF/RSPF":
Total number of copies
Total number of pages scanned using the
RSPF
• "2-SIDED PRINT":
Total number of pages printed by two-sided
print
• "PRINTS":
Total number of pages printed the printer
function
• "FAX":
• "FAX SEND":
• "SCAN SEND":
Total number of sent and received faxes
Total number of sent faxes
Total number of scans
• "REMAINING DRUM LIFE": The remaining number of pages that can be
printed with the drum is displayed.
• "TONER REMAINING":
The approximate amount of toner remaining
in the TD cartridge is displayed as a
percentage.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING THE MACHINE
Proper care is essential in order to get clean, sharp copies. Be sure to take a few
minutes to clean the machine on a regular basis.
Do not spray flammable cleaner gas. Gas from the spray may
Warning
come in contact with the internal electrical components or high-
temperature parts of the fusing unit, creating a risk of fire or
electrical shock.
• Before cleaning, be sure to turn the power switch off and remove
the power cord from the outlet.
Caution
• Do not use thinner, benzene or other volatile cleaning agents.
Doing so may cause deformation, discoloration, deterioration or
malfunction.
Cabinet
Wipe the cabinet with a soft, clean cloth.
Document glass and the back side of the RSPF
Stains on the glass, RSPF scanning window, cover or RSPF roller will also be
copied. Wipe the glass, RSPF scanning window, cover and RSPF roller with a soft,
clean cloth. If necessary, dampen the cloth with a glass cleaner.
Document glass/scanning window
RSPF
RSPF
Scanning window
RSPF roller
Black line
If this area is dirty, copying
from the RSPF will not be
possible.
8
89
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING AND MAINTENANCE
Transfer charger
If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean
the charger using the following procedure.
Turn the power switch off. (p.13)
1
Ensure that the bypass tray is open and then open the side
cover while pressing the side cover open button. (p.79)
2
Take the charger cleaner out by holding the tab. Set the charger
3
cleaner onto the right end of the transfer charger, gently slide
the cleaner to the left end, and then remove it. Repeat this
operation two or three times.
Slide the charger cleaner from the right end to the left end along the
Note
groove of the transfer charger. If the cleaner is stopped on the way,
smudges on copies may occur
.
Return the charger cleaner
to its original position.
Close the side cover by
pressing the round
projections near the side
cover open button.
4
5
Turn the power switch on. (p.12)
90
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING AND MAINTENANCE
TD cartridge and drum cartridge
Remove the TD cartridge and drum cartridge as explained in
"TD CARTRIDGE REPLACEMENT" (p.84) and "DRUM
CARTRIDGE REPLACEMENT" (p.87).
1
Wipe the parts of the TD cartridge and drum cartridge shown
below with a clean cloth.
2
Wipe only the parts that are indicated in the illustration.
• Do not touch the surface of the drum (green portion).
Note
Doing so may cause smudges on the copies.
• When cleaning the TD cartridge, do not tilt or shake it. Toner may
spill out and soil your clothes.
Replace the TD cartridge and drum cartridge as explained in
"TD CARTRIDGE REPLACEMENT" (p.84) and "DRUM
CARTRIDGE REPLACEMENT" (p.87).
3
4
ABOUT SUPPLIES
When ordering supplies, please use the correct part numbers as listed below.
Be sure to use only genuine SHARP parts and supplies.
Note
For best copying results, be sure to use only SHARP Genuine
Supplies which are designed, engineered, and tested to maximize
the life and performance of SHARP copiers. Look for the Genuine
Supplies label on the toner package.
8
Supply list
Supply
Part number
FO-55ND
Usable life
TD cartridge
Drum cartridge
Approx. 6,000 sheets
Approx. 18,000 sheets
FO-55DR
* Based on copying onto letter size paper at 5% toned area
(The starter TD cartridge included with the machine has a life of approximate
2,000 sheets at 5% toned area.)
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9
OPTIONAL EQUIPMENT
9
SYSTEM CONFIGURATION
A number of options are available for the unit which allow you to configure a system
to meet your particular needs. The options include the following.
Be sure to use only genuine SHARP parts and supplies.
Note
Network
Expansion Kit
(AR-NB2 N)
250-sheet paper
feed unit
(AR-D16)
NETWORK EXPANSION KIT (AR-NB2 N)
250-SHEET PAPER FEED UNIT (AR-D16)
The paper feed unit provide the convenience of increased paper capacity for the unit
and a greater choice of paper size readily available for copying.
The procedures for loading paper in the
paper tray of paper feed unit, changing
the paper size, and selecting the paper
tray are same as for the paper tray in the
unit. See "LOADING THE PAPER TRAY"
(p.15) and "SELECTING THE TRAY"
(p.23).
Lower side cover
Tray
92
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTIONAL EQUIPMENT
Using the AR-D16 with the printer function
To use the AR-D16 with the printer function, follow these steps to adjust the settings
in the printer driver.
The printer driver cannot be set for use with the AR-D16 when opened
from the application.
Note
Click the "start" button.
1
Click "Control Panel", select "Printer and Other Hardware", and
then click "Printer and Faxes".
2
In Windows 95/98/Me/NT 4.0/2000, select "Setting" and click "Printers".
Click the "SHARP FO-DC550" printer driver icon and from the
"File" menu select "Properties".
3
In Windows 95/98/Me, click the "SHARP FO-DC550" printer driver icon,
select "Properties" from the "File" menu, and then click the "Setup" tab.
Click the "Utility" tab.
4
Select "Two trays" for "Input tray
option", and click "OK".
5
The printer driver closes. This completes the
settings needed to use the AR-D16.
Interface cable
Please purchase the appropriate cable for your computer.
USB interface cable
USB cable that supports USB 2.0.
Parallel interface cable
IEEE 1284-shielded type bi-directional parallel cable.
9
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 10
APPENDIX
10
SPECIFICATIONS
Model
FO-DC550
Type
Digital Multifunctional System, Desktop
Photoconductive
type
OPC drum
Document glass
type
Fixed
Copy/printing
system
Dry, electrostatic transfer
Originals
Sheets, bound documents
Max. 8-1/2" x 14"
Originals size
Max. 8-1/2" x 14"
Min. 3-1/2" x 5-1/2"
Image loss: Max. 5/32" (4 mm) (leading and trailing edges)
Max. 11/64" (4.5 mm) (along other edges in
total)
Copy size
Max. 15/64" (6 mm)
(trailing edge of the second copy of two-sided
copying)
Copying speed
(one-sided copying 16 copies/min. (8-1/2" x 11")
at 100% copy ratio)
Continuous copy
Max. 99 copies; subtractive counter
Approx. 9.6 sec.
1
First-copy time*
1
Warm-up time*
Approx. 0 sec.
Document glass:
Variable: 25% to 400% in 1% increments (total 376 steps)
Fixed preset:25%, 50%, 64%, 78%, 100%, 129%, 200%,
400%
Copy ratio
RSPF:
Variable: 50% to 200% in 1% increments (total 151 steps)
Fixed preset:50%, 64%, 78%, 100%, 129%, 200%
Document glass: Moving optical source, slit exposure
(stationary platen) with automatic
exposure function
Exposure system
Paper feed
RSPF:
Moving original
One automatic feeding paper tray (250 sheets each) +
bypass tray (50 sheets)
94
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
Fusing system
Developer system
Light source
Heat rollers
Magnetic brush development
Tri-color CCD light source (CCD: 3 components; R, G, and B)
Scan: 600 x 300 dpi Output: 600 x 600 dpi (AUTO/TEXT mode)
Scan: 600 x 600 dpi Output: 600 x 600 dpi (PHOTO mode)
Resolution
Gradation
Scanning: 256 Printing: 2 value
AC 120V, 60 Hz, 8A
Power supply
Power consumption Max. 1.0 kW
Overall dimensions
(with bypass tray
folded)
20.4" (W) x 19.8" (D) (518 mm (W) x 503 mm (D))
2
Weight*
Approx. 44.1 lbs. (20.0 kg)
20.4" (W) x 19.8" (D) x 15.0" (H)
(518 mm (W) x 503mm (D) x 380 mm (H))
Dimensions
Operating
conditions
Temperature: 50°F to 86°F (10°C to 30°C), Humidity: 20%
to 85%
Sound Power Level LwA(1B=10dB)
Copying: 6.0[B]
Standby: 3.2[B]
Sound Pressure Level LpA (bystander positions)
Copying: 46[dB(A)]
Standby: 17[dB(A)]
Noise level
Sound Pressure Level LpA (operator position)
Copying: 48[dB(A)]
Standby: 18[dB(A)]
Noise emission measurement in accordance with ISO 7779.
Emission
concentration
(measured
according to RAL-
UZ62 : Edition Jan.
2002)
3
Ozone: 0.02 mg/m or less
Dust:
3
0.075 mg/m or less
3
Styrene: 0.07 mg/m or less
1
* The copy time in the case when the power is turned on and copying using the
document glass is started immediately after the power save indicator goes off (A4,
paper fed from paper tray).
The first-copy time and warm-up time may vary depending on machine operating
conditions and ambient conditions such as temperature.
* Not including TD and drum cartridges.
2
10
95
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
Printer Function
Print speed
Resolution
Memory
16ppm
600 dpi
Approx. 10MB
Emulation
SPLC (Sharp Printer Language with Compression)
IEEE 1284-compliant bi-directional parallel interface
USB 2.0 (Full-Speed/Hi-Speed compatible interface)
Interface
[USB cable]
USB cable that supports USB 2.0.
Please purchase a commercially available USB cable.
[Parallel cable]
Interface cables
Shielded type cable
Please purchase a commercially available parallel cable.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
Scanner Function
Type
Flatbed scanner
Scanning method
Document glass/RSPF
Tri-color CCD light source (CCD: 3 components; R, G, and
B)
Light source
Basic: 600 dpi x 1200 dpi
Setting range: 50dpi - 9600dpi
Resolution
Original types
Sheet media, books
Effective scanning
area
8.5" (216 mm) (Lengthwise) x 14" (356 mm) (Width)
Scanning speed
Input Data
2.88 msec/line
1 bit or 12 bit
Output Data
Scanning colors
Protocol
R.G.B 1 or 8 bits / pixel / A/D 16 bit
Black and white 2 value, Grayscale, Full color
TWAIN / WIA (Windows XP only) / STI
USB 2.0 (Full-Speed/Hi-Speed compatible interface)
Yes
Interface
Drop out color
Windows 98/Me
Windows 2000 Professional/Windows XP Home Edition/
Professional
(Detailed information can be found in "BEFORE
INSTALLATION" (p.37))
Supported
operating systems
Top and bottom edges 5/32" (4.0 mm) due to scanner
driver
Right and left edges 11/64" (4.5 mm)
Void area
[USB cable]
Interface cables
Scanner utilities
USB cable that supports USB 2.0.
Please purchase a commercially available USB cable.
Button Manager / Sharpdesk
10
97
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
250-sheet paper feed unit (AR-D16)
Paper size
5-1/2" x 8-1/2" to 8-1/2" x 14"
2
2
Paper weight
15 lbs. to 21 lbs. (56g/m to 80g/m )
One paper tray with capacity for 250 sheets of 21 lbs. bond
paper
Paper capacity
Weight
6.6 lbs. (3kg)
19.6" (W) x 15.6" (D) x 3.5" (H)
(498mm (W) x 395mm (D) x 88mm (H))
Dimensions
Power supply
Drawn from the unit
As a part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
Note
98
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTWARE LICENSE
PLEASE READ THIS LICENSE CAREFULLY BEFORE USING THE SOFTWARE. BY
USING THE SOFTWARE, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF
THIS LICENSE.
1. License.
The application, demonstration, system and other software accompanying this License, whether on disk,
in read only memory, or on any other media (the "Software") and related documentation are licensed to
you by SHARP. You own the disk on which the Software is recorded but SHARP and/or SHARP'S
Licensors retain title to the Software and related documentation. This License allows you to use the
Software on one or more computers connected to a single printer and make one copy of the Software in
machine-readable form for backup purposes only. You must reproduce on such copy the SHARP
copyright notice, the copyright notice of SHARP’S Licensors and any other proprietary legends of
SHARP and/or its Licensors that were on the original copy of the Software. You may also transfer all
your license rights in the software, the backup copy of the Software, the related documentation and a
copy of this License to another party, provided the other party reads and agrees to the terms and
conditions of this License.
2. Restrictions.
The Software contains copyrighted material, trade secrets and other proprietary material which is owned
by SHARP and/or its Licensors and in order to protect them you may not decompile, reverse engineer,
disassemble or otherwise reduce the Software to a human-perceivable form. You may not modify,
network, rent, lease, loan, distribute or create derivative works based upon the Software in whole or in
part. You may not electronically transmit the Software from one computer to another or over a network.
3. Termination.
This license is effective until terminated. You may terminate this License at any time by destroying the
Software and related documentation and all copies thereof. This License will terminate immediately
without notice from SHARP and/or SHARP’S Licensors if you fail to comply with any provision of this
License. Upon termination you must destroy the Software and related documentation and all copies
thereof.
4. Export Law Assurances.
You agree and certify that neither the Software nor any other technical data received from SHARP, nor
the direct product thereof, will be exported outside the United States except as authorized and as
permitted by the laws and regulations of the United States. If the Software has been rightfully obtained by
you outside of the United States, you agree that you will not re-export the Software nor any other
technical data received from SHARP, nor the direct product thereof, except as permitted by the laws and
regulations of the United States and the laws and the regulation of the jurisdiction in which you obtained
the Software.
5. Government End Users.
If you are acquiring the Software on behalf of any unit or agency of the United States Government, the
following provisions apply. The Government agrees:
(i) if the Software is supplied to the Department of Defense (DoD), the Software is classified as
"Commercial Computer Software" and the Government is acquiring only "restricted rights" in the
Software and its documentation as that term is defined in Clause 252.227-7013 (c)(1) of the
DFARS; and
(ii) if the Software is supplied to any unit or agency of the United States Government other than DoD,
the Government's rights in the Software and its documentation will be as defined in Clause 52.227-
19 (c)(2) of the FAR or, in the case of NASA, in Clause 18-52.227-86 (d) of the NASA
Supplement to the FAR.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Limited Warranty on Media.
SHARP warrants the disks on which the Software is recorded to be free from defects in materials and
workmanship under normal use for a period of ninety (90) days from the date of purchase as evidenced
by a copy of the receipt. The entire liability of SHARP and/or its Licensors and your exclusive remedy
will be replacement of the disk which fails to meet the limited warranty provided by this Clause 6. A disk
will be replaced when it is returned to SHARP or a SHARP authorized representative with a copy of the
receipt. SHARP will have no responsibility to replace a disk damaged by accident, abuse or
misapplication.
ANY IMPLIED WARRANTIES ON THE DISKS, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN
DURATION TO NINETY (90) DAYS FROM THE DATE OF DELIVERY. THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH
VARY FROM JURISDICTION TO JURISDICTION.
7. Disclaimer of Warranty on Software.
You expressly acknowledge and agree that use of the Software is at your sole risk. The software and
related documentation are provided "AS IS" and without warranty of any kind and SHARP and SHARP'S
Licensor(s) (for the purpose of provisions 7 and 8, SHARP and SHARP'S Licensor(s) shall be
collectively referred to as "SHARP") EXPRESSLY DISCLAIM ALL WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SHARP DOES NOT
WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET YOUR
REQUIREMENTS, OR THAT THE OPERATION OF THE SOFTWARE WILL BE
UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE
CORRECTED. FURTHERMORE, SHARP DOES NOT WARRANT OR MAKE ANY
REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE
SOFTWARE OR RELATED DOCUMENTATION IN TERMS OF THEIR CORRECTNESS,
ACCURACY, RELIABILITY, OR OTHERWISE. NO ORAL OR WRITTEN INFORMATION OR
ADVICE GIVEN BY SHARP OR A SHARP AUTHORIZED REPRESENTATIVE SHALL CREATE
A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY. SHOULD
THE SOFTWARE PROVE DEFECTIVE, YOU (AND NOT SHARP OR A SHARP AUTHORIZED
REPRESENTATIVE) ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR
OR CORRECTION, SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED
WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.
8. Limitation of Liability.
UNDER NO CIRCUMSTANCES INCLUDING NEGLIGENCE, SHALL SHARP BE LIABLE FOR
ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES THAT RESULT FROM THE
USE OR INABILITY TO USE THE SOFTWARE OR RELATED DOCUMENTATION, EVEN IF
SHARP OR A SHARP AUTHORIZED REPRESENTATIVE HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW THE
LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
In no event shall SHARP'S total liability to you for all damages, losses, and causes of action (whether in
contract, tort (including negligence) or otherwise) exceed the amount paid by you for the Software.
9. Controlling Law and Severability.
For a portion of the Software related with Apple Macintosh and Microsoft Windows, this license shall be
governed by and construed in accordance with the laws of the state of California and Washington,
respectively. If for any reason a court of competent jurisdiction finds any provision of this License, or
portion thereof, to be unenforceable, that provision of the License shall be enforced to the maximum
extent permissible so as to effect the intent of the parties, and the remainder of this License shall continue
in full force and effect.
10. Complete Agreement.
This License constitutes the entire agreement between the parties with respect to the use of the Software and
related documentation, and supersedes all prior or contemporaneous understandings or agreements, written
or oral, regarding such subject matter. No amendment to or modification of this License will be binding
unless in writing and signed by a duly authorized representative of SHARP.
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Page: 1/4
MATERIAL SAFETY DATA SHEET
Date Rivised : Mar. 1. 2004
Date Issued : Sep. 1. 2003
MSDS No. F-01231
1. PRODUCT AND COMPANY IDENTIFICATION
Product Name : FO-DC550 / FO-55ND (Black Toner)
Supplier Identification : Sharp Corporation
22-22 Nagaike-cho, Abeno-ku, Osaka, Japan
Local suppliers are listed below. Please contact the nearest supplier for additional information.
Area
(Country)
U.S.A.
(Name and Telephone Number)
Sharp Electronics Corporation
Sharp Plaza, Mahwah, NJ
Telephone number for information
Emergency telephone number
: 1-800-237-4277
: 1-800-255-3924
North
America
Canada Sharp Electronics of Canada Ltd.
Telephone number for information
Emergency telephone number
: 905-890-2100
: 1-800-255-3924
Australia Sharp Corporation of Australia PTY. Ltd.
Oceania
No1 Huntingwood Drive Huntingwood Blacktown N.S.W.
Telephone number for information
: 1300-13-50-22
Germany Sharp Electronics (Europe) GMBH
Sonninstrasse 3, 20097 Hamburg
Telephone number to access MSDS
For more information
: 040-2376-2185
: 040-2376-2613
United
Sharp Electronics (U. K.) Ltd.
Kingdom
Telephone number for information
: 08705-274-277
: 01-49-90-34-00
: 01-727-19-0
: 02895951
France
Austria
Italy
Sharp Electronics France S.A.
Telephone number for information
Sharp Electronics GMBH
Telephone number for information
Sharp Electronics (Italy) S.P.A.
Telephone number for information
Europe
Spain
Sharp Electronics (Espana) S.A.
Telephone number for information
: 93-581-97-00
: 30-6359500
: 08-634-36-00
: 01-846-6111
Netherlands Sharp Electronics Benelux B.V.
Telephone number for information
Sweden Sharp Electronics Nordic AB
Telephone number for information
Switzerland Sharp Electronics (Schweiz) AG
Telephone number for information
U.A.E.
Sharp Middle East FZE
P.O.Box 17115 Jebel Ali, Dubai
Telephone number for information
Middle
East
: 04-815311
2. COMPOSITION / INFORMATION ON INGREDIENTS
Substance[ ]
Preparation[X]
Ingredient
CAS No. Proportion OSHA PEL ACGIH TLV MAK-TWA NOHSC-TWA
Styrene-Acrylate Confidential 85-90%
copolymer
Not listed Not listed Not listed
Not listed
Carbon black
Iron oxide
Paraffin
1333-86-4
1317-61-9
8002-74-2
5-8%
1-5%
1-3%
3.5mg/m3 3.5mg/m3 Not listed
Not listed Not listed Not listed
Not listed Not listed Not listed
Not listed Not listed Not listed
3mg/m3
Not listed
Not listed
Not listed
Polypropylene Confidential
0.5-3%
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Page: 2/4
MATERIAL SAFETY DATA SHEET
Date Rivised : Mar. 1. 2004
Date Issued : Sep. 1. 2003
MSDS No. F-01231
3. HAZARDS IDENTIFICATION
Most Important Hazards and Effects of the Products
Human Health Effects : There are no anticipated carcinogenic effects from exposure based on
animal tests performed using toner. When used as intended according
to instructions, studies do not indicate any symptoms of fibrosis will
occur.
Environmental Effects : No data are available.
Specific Hazards
: Dust explosion (like most finely divided organic powders)
Directive 1999/45/EC (Europe) : Not classified as dangerous
4. FIRST-AID MEASURES
Route(s) of Entry: Inhalation?
Skin?
No
Ingestion?
Possible but very unusual.
Yes
Inhalation
: Remove to fresh air. If symptoms occur, consult medical personnel.
Skin Contact : Wash with soap and water for 15 minutes or until particle is removed.
If irritation does occur, consult medical personnel.
Eye Contact : Flush eyes immediately with water for 15 minutes. If irritation does occur,
consult medical personnel.
Ingestion
: Rinse with water and drink several glasses of water. If irritation or discomfort
does occur, consult medical personnel.
5. FIRE-FIGHTING MEASURES
Extinguishing Media
: Water, CO , foam and dry chemicals
2
Special Fire Fighting Procedures : None
Fire and Explosion Hazards : Toner material, like most finely divided organic powders,
may form an explosive mixture.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions : None
Environmental Precautions : None
Methods for Cleaning Up
: Wipe off with paper or cloth. Do not use vacuum cleaner when a
large amount is released. It, like most finely divided organic
powders, is capable of creating a dust explosion.
7. HANDLING AND STORAGE
Handling
Technical Measures : None
Precautions
: None
Safe Handling Advice : Use of a dust mask is recommended when handling a large quantity
of toner or during long term exposure, as with any non-toxic dust. Try
not to disperse the particles.
Storage
Technical Measures : None
Storage Conditions : Keep container closed and Store in a cool and dry place.
Keep out of the reach of children.
Incompatible Products : None
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Page: 3/4
MATERIAL SAFETY DATA SHEET
Date Rivised : Mar. 1. 2004
Date Issued : Sep. 1. 2003
MSDS No. F-01231
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering Measures
Ventilation
: Not required under intended use.
Exposure Limit Values
OSHA-PEL (USA)
ACGIH-TLV (USA)
: 15mg/m3 (Total Dust), 5mg/m3 (Respirable Dust)
: 10mg/m3 (Total Dust), 3mg/m3 (Respirable Dust)
Personal Protective Equipment
Respiratory Protection
Hand Protection
Eye Protection
: Not required under intended use.
: Not required under intended use.
: Not required under intended use.
: Not required under intended use.
Skin Protection
Other Protective Equipment : Use of a dust mask and goggles are recommended when
handling a large quantity of toner or during long term exposure,
as with any non-toxic dust.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Physical State: Solid
Ph
Form: Powder
: Not applicable
Boiling / Melting Point : Not applicable
Color: Black
Odor: odorless
Softening Point (°C)
Flash Point (°C)
Ignition Point (°C)
: 130°C
: Not applicable
: No data
Explosion Properties : No data
Density (g/cm3)
: 1.1
Solubility in Water
: Negligible
10. STABILITY AND REACTIVITY
Stability
: Stable
Hazardous Reactions
Conditions to Avoid
Materials to Avoid
: Dust explosion, like most finely divided organic powders.
: Electric discharge, throwing into fire.
: Oxidizing Materials
Hazardous Decomposition Products: CO, CO and NO
Further Information
2
X
: None
11. TOXICOLOGICAL INFORMATION
Acute Toxicity
Ingestion (oral) : LD > 2000mg/kg (Rats)
50
50
Inhalation
Eye irritation
: LC > 5.14mg/L (Rats)
: Not an irritant (Rabbits)
Skin irritation : Not an irritant (Rabbits)
Skin sensitizer : No data
Mutagenicity
: Negative (Ames Test).
Carcinogenicity : In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen
(possible human carcinogen). This classification is given to chemicals for
which there is inadequate human evidence, but sufficient animal evidence on
which to base an opinion of carcinogenicity. The classification is based upon
the development of lung tumors in rats receiving chronic inhalation exposures
to free carbon black at levels that induce particle overload of the lung. Studies
performed in animal models other than rats did not show any association
between carbon black and lung tumors. Moreover, a two-year cancer bioassay
using a typical toner preparation containing carbon black demonstrated no
association between toner exposure and tumor development in rats.
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Page: 4/4
MATERIAL SAFETY DATA SHEET
Date Rivised : Mar. 1. 2004
Date Issued : Sep. 1. 2003
MSDS No. F-01231
Chronic Effect : In a study in rats of chronic inhalation exposure to a typical toner, a mild to
moderate degree of lung fibrosis was observed in 92% of the rats in the high
concentration (16mg/m3) exposure group, and a minimal to mild degree of
fibrosis was noted in 22% of the animals in the middle (4mg/m3) exposure
group, but no pulmonary change was reported in the lowest (1mg/m3)
exposure group, the most relevant level to potential human exposures.
12. ECOLOGICAL INFORMATION
No data are available.
13. DISPOSAL CONSIDERATIONS
Waste from Residues
: Waste material may be dumped or incinerated under conditions
which meet all federal, state and local environmental regulations.
Contaminated Packaging: Waste may be disposed or incinerated under conditions which meet
all federal, state and local environmental regulations.
14. TRANSPORT INFORMATION
UN Classification
: None
Not classified as hazardous for transport.
15. REGULATORY INFORMATION
US Information
TSCA (Toxic Substances Control Act) :
All chemical substances in this product comply with all applicable rules or order under TSCA.
SARA (Superfund Amendments and Reauthorization Act) Title III
302 Extreme Hazardous Substance : None
311/312 Hazard Classification
EU Information
: None
1999/45/EC and 67/548/EEC
Symbol & Indication
R-Phrase
: Not required
: Not required
: All chemical substances in this product comply with
all applicable rules or order under 76/769/EEC.
76/769/EEC
16. OTHER INFORMATION
NFPA Rating (USA)
: Health=1
Flammability=1
Reactivity=0
WHMIS Legislation (Canada) : This product is not a controlled product.
References
IARC (1996) : IARC monographs on the Evaluation of the Carcinogenic Risk of Chemicals to
Humans, Vol. 65, Printing Process And Printing Inks, Carbon Black and Some
Nitro Compounds, Lyon, pp.149-261
H.Muhle, B.Bellmann, O.Creutzenberg, C.Dasenbrock, H.Ernst, R.Kilpper, J.C.MacKenzie,
P.Morrow, U.Mohr, S.Takenaka, and R.Mermelstein (1991) Pulmonary Response to Toner
upon Chronic Inhalation Exposure in Rats. Fundamental and Applied Toxicology 17, pp.280-
299.
The information on this data sheet represents our current data and best opinion as to the proper
use in handling of this product under normal conditions. However, all materials may present
unknown hazards and should be used with caution. Although certain hazards are described
herein, we do not guarantee that these are the only hazards which exist.
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Page: 1/4
MATERIAL SAFETY DATA SHEET
Date Rivised: Mar. 1. 2004
Date Issued: Sep. 1. 2003
MSDS No. F-31231
1. PRODUCT AND COMPANY IDENTIFICATION
Product Name
: FO-DC550 / FO-55ND (Black Developer)
Supplier Identification : Sharp Corporation
22-22 Nagaike-cho, Abeno-ku, Osaka, Japan
Local suppliers are listed below. Please contact the nearest supplier for additional information.
Area
(Country)
U.S.A.
(Name and Telephone Number)
Sharp Electronics Corporation
Sharp Plaza, Mahwah, NJ
Telephone number for information
Emergency telephone number
: 1-800-237-4277
: 1-800-255-3924
North
America
Canada Sharp Electronics of Canada Ltd.
Telephone number for information
Emergency telephone number
: 905-890-2100
: 1-800-255-3924
Australia Sharp Corporation of Australia PTY. Ltd.
Oceania
No1 Huntingwood Drive Huntingwood Blacktown N.S.W.
Telephone number for information
: 1300-13-50-22
Germany Sharp Electronics (Europe) GMBH
Sonninstrasse 3, 20097 Hamburg
Telephone number to access MSDS
For more information
: 040-2376-2185
: 040-2376-2613
United
Sharp Electronics (U. K.) Ltd.
Kingdom
Telephone number for information
: 08705-274-277
: 01-49-90-34-00
: 01-727-19-0
: 02895951
France
Austria
Italy
Sharp Electronics France S.A.
Telephone number for information
Sharp Electronics GMBH
Telephone number for information
Sharp Electronics (Italy) S.P.A.
Telephone number for information
Europe
Spain
Sharp Electronics (Espana) S.A.
Telephone number for information
: 93-581-97-00
: 30-6359500
: 08-634-36-00
: 01-846-6111
Netherlands Sharp Electronics Benelux B.V.
Telephone number for information
Sweden Sharp Electronics Nordic AB
Telephone number for information
Switzerland Sharp Electronics (Schweiz) AG
Telephone number for information
U.A.E.
Sharp Middle East FZE
P.O.Box 17115 Jebel Ali, Dubai
Telephone number for information
Middle
East
: 04-815311
2. COMPOSITION / INFORMATION ON INGREDIENTS
Substance[ ]
Preparation[X]
Ingredient
CAS No.
Proportion OSHA PEL ACGIH TLV MAK-TWA NOHSC-TWA
Iron powder
Styrene-Acrylate Confidential
copolymer
7439-89-6
90-95%
5-10%
Not listed Not listed Not listed
Not listed Not listed Not listed
Not listed
Not listed
Carbon black
1333-86-4
0.1-0.9%
3.5mg/m3 3.5mg/m3 Not listed
3mg/m3
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Page: 2/4
MATERIAL SAFETY DATA SHEET
Date Rivised: Mar. 1. 2004
Date Issued: Sep. 1. 2003
MSDS No. F-31231
3. HAZARDS IDENTIFICATION
Most Important Hazards and Effects of the Products
Human Health Effects : There are no anticipated carcinogenic effects from exposure based on
animal tests performed using toner. When used as intended according
to instructions, studies do not indicate any symptoms of fibrosis will
occur.
Environmental Effects : No data are available.
Specific Hazards
: Dust explosion (like most finely divided organic powders)
Directive 1999/45/EC (Europe) : Not classified as dangerous
4. FIRST-AID MEASURES
Route(s) of Entry: Inhalation?
Skin?
No
Ingestion?
Possible but very unusual.
No
Inhalation
: Remove to fresh air. If symptoms occur, consult medical personnel.
Skin Contact : Wash with soap and water for 15 minutes or until particle is removed.
If irritation does occur, consult medical personnel.
Eye Contact : Flush eyes immediately with water for 15 minutes. If irritation does occur,
consult medical personnel.
Ingestion
: Rinse with water and drink several glasses of water. If irritation or discomfort
does occur, consult medical personnel.
5. FIRE-FIGHTING MEASURES
Extinguishing Media
: Water, CO , foam and dry chemicals
2
Special Fire Fighting Procedures : None
Fire and Explosion Hazards : Toner material, like most finely divided organic powders,
may form an explosive mixture.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions : None
Environmental Precautions : None
Methods for Cleaning Up
: Wipe off with paper or cloth. Do not use vacuum cleaner when a
large amount is released. It, like most finely divided organic
powders, is capable of creating a dust explosion.
7. HANDLING AND STORAGE
Handling
Technical Measures : None
Precautions
: None
Safe Handling Advice : Use of a dust mask is recommended when handling a large quantity
of toner or during long term exposure, as with any non-toxic dust. Try
not to disperse the particles.
Storage
Technical Measures : None
Storage Conditions : Keep container closed and Store in a cool and dry place.
Keep out of the reach of children.
Incompatible Products : None
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Page: 3/4
MATERIAL SAFETY DATA SHEET
Date Rivised: Mar. 1. 2004
Date Issued: Sep. 1. 2003
MSDS No. F-31231
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering Measures
Ventilation
: Not required under intended use.
Exposure Limit Values
OSHA-PEL (USA)
ACGIH-TLV (USA)
: 15mg/m3 (Total Dust), 5mg/m3 (Respirable Dust)
: 10mg/m3 (Total Dust), 3mg/m3 (Respirable Dust)
Personal Protective Equipment
Respiratory Protection
Hand Protection
Eye Protection
: Not required under intended use.
: Not required under intended use.
: Not required under intended use.
: Not required under intended use.
Skin Protection
Other Protective Equipment : Use of a dust mask and goggles are recommended when
handling a large quantity of toner or during long term exposure,
as with any non-toxic dust.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Physical State: Solid
Ph
Boiling / Melting Point : Not applicable
Form: Powder
Color: Black
Odor: odorless
: Not applicable
Softening Point (°C)
Flash Point (°C)
: 130°C (toner)
: Not applicable
: No data
Ignition Point (°C)
Explosion Properties : No data
Density (g/cm3)
: 7
Solubility in Water
: Negligible
10. STABILITY AND REACTIVITY
Stability
: Stable
Hazardous Reactions
Conditions to Avoid
Materials to Avoid
: Dust explosion, like most finely divided organic powders.
: Electric discharge, throwing into fire.
: Oxidizing Materials
Hazardous Decomposition Products: CO, CO and NO
Further Information
2
X
: None
11. TOXICOLOGICAL INFORMATION
Acute Toxicity
Ingestion (oral) : LD > 2000mg/kg (Rats)
50
50
Inhalation
Eye irritation
: LC > 5.14mg/L (Rats)
: Not an irritant (Rabbits)
Skin irritation : Not an irritant (Rabbits)
Skin sensitizer : No data
Mutagenicity
: Negative (Ames Test).
Carcinogenicity : In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen
(possible human carcinogen). This classification is given to chemicals for
which there is inadequate human evidence, but sufficient animal evidence on
which to base an opinion of carcinogenicity. The classification is based upon
the development of lung tumors in rats receiving chronic inhalation exposures
to free carbon black at levels that induce particle overload of the lung. Studies
performed in animal models other than rats did not show any association
between carbon black and lung tumors. Moreover, a two-year cancer bioassay
using a typical toner preparation containing carbon black demonstrated no
association between toner exposure and tumor development in rats.
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Page: 4/4
MATERIAL SAFETY DATA SHEET
Date Rivised: Mar. 1. 2004
Date Issued: Sep. 1. 2003
MSDS No. F-31231
Chronic Effect : In a study in rats of chronic inhalation exposure to a typical toner, a mild to
moderate degree of lung fibrosis was observed in 92% of the rats in the high
concentration (16mg/m3) exposure group, and a minimal to mild degree of
fibrosis was noted in 22% of the animals in the middle (4mg/m3) exposure
group, but no pulmonary change was reported in the lowest (1mg/m3)
exposure group, the most relevant level to potential human exposures.
12. ECOLOGICAL INFORMATION
No data are available.
13. DISPOSAL CONSIDERATIONS
Waste from Residues
: Waste material may be dumped or incinerated under conditions
which meet all federal, state and local environmental regulations.
Contaminated Packaging: Waste may be disposed or incinerated under conditions which meet
all federal, state and local environmental regulations.
14. TRANSPORT INFORMATION
UN Classification
: None
Not classified as hazardous for transport.
15. REGULATORY INFORMATION
US Information
TSCA (Toxic Substances Control Act) :
All chemical substances in this product comply with all applicable rules or order under TSCA.
SARA (Superfund Amendments and Reauthorization Act) Title III
302 Extreme Hazardous Substance : None
311/312 Hazard Classification
EU Information
: None
1999/45/EC and 67/548/EEC
Symbol & Indication
R-Phrase
: Not required
: Not required
: All chemical substances in this product comply with
all applicable rules or order under 76/769/EEC.
76/769/EEC
16. OTHER INFORMATION
NFPA Rating (USA)
: Health=1
Flammability=1
Reactivity=0
WHMIS Legislation (Canada) : This product is not a controlled product.
References
IARC (1996) : IARC monographs on the Evaluation of the Carcinogenic Risk of Chemicals to
Humans, Vol. 65, Printing Process And Printing Inks, Carbon Black and Some
Nitro Compounds, Lyon, pp.149-261
H.Muhle, B.Bellmann, O.Creutzenberg, C.Dasenbrock, H.Ernst, R.Kilpper, J.C.MacKenzie,
P.Morrow, U.Mohr, S.Takenaka, and R.Mermelstein (1991) Pulmonary Response to Toner
upon Chronic Inhalation Exposure in Rats. Fundamental and Applied Toxicology 17, pp.280-
299.
The information on this data sheet represents our current data and best opinion as to the proper
use in handling of this product under normal conditions. However, all materials may present
unknown hazards and should be used with caution. Although certain hazards are described
herein, we do not guarantee that these are the only hazards which exist.
108
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
Symbols
[CLEAR] key
............... 10, 20, 21, 23, 29, 30, 58, 79
Connecting the machine to your computer
- Parallel cable............................... 56
- USB cable ................................... 55
Convenient copy functions ............... 26
Conventions used in this manual and
online manual..................................... 6
[COPY RATIO] key..................... 11, 25
[
[
[
] key..........................10, 27, 29, 32
] key ........................................... 10
] key ........................................... 10
2
2 IN 1 copy ....................................... 31
250-sheet paper feed unit .......... 92, 98
[2-SIDED COPY] key ........... 10, 27, 28
D
A
Display.............................................. 10
Display messages ............................ 69
Document feeder cover................ 9, 82
Document feeder tray................... 9, 21
Document glass............................ 9, 31
Drum cartridge........................ 9, 87, 91
Drum cartridge handle...................... 87
Drum cartridge replacement............. 87
About the operation manuals ............. 6
Appendix .......................................... 94
Audible signals ................................. 68
Auto clear ......................................... 12
Auto power shut-off mode ................ 13
Automatic two-sided copying............ 26
B
Basic procedure for printing ............. 58
Before installation............................. 37
Button Manager................................ 36
Bypass feed...................................... 17
Bypass tray................. 9, 17, 18, 79, 84
Bypass tray paper guides............. 9, 18
E
[ENTER] key..................................... 10
Envelopes......................................... 17
Environmental information.................. 5
Error indicator....................... 10, 69, 79
[E-SORT/SP.FUN] key
C
........................... 10, 29, 30, 31, 33, 34
Canceling a print job......................... 58 Exit area ............................................. 9
Capacity of paper output tray ........... 22 [EXPOSURE] key....................... 10, 24
Caution
Exposure value guidelines ............... 24
- Handling the machine.................... 4
- Label on the machine.................... 3
- Selecting an installation site.......... 3
- Using the machine......................... 3
Changing a tray’s paper size
setting............................................... 19
Charger cleaner............................ 9, 90
Checking the total count................... 88
Cleaning the machine
- Cabinet........................................ 89
- Document glass........................... 89
- Drum cartridge............................. 91
- RSPF........................................... 89
- RSPF scanning window .............. 89
- TD cartridge................................. 91
- Transfer charger.......................... 90
[CLEAR ALL] key ................. 11, 12, 58
F
Front cover ............................. 9, 81, 84
Fusing unit release lever ........ 9, 80, 81
H
Handles .............................................. 9
Hardware and software
requirements .................................... 37
How to place the original.................. 20
How to use the online manual.......... 61
109
Download from Www.Somanuals.com. All Manuals Search And Download.
I
O
Initial settings.................................... 12 Offset function during sort copy........ 30
Installation environment and usable Operation in copy, printer, and scanner
software............................................ 37 modes............................................... 60
Installing Acrobat Reader ................. 61 Operation panel............................ 9, 10
Installing the software
Optional equipment .......................... 92
- Custom installation...................... 40 Original guides ............................. 9, 21
- Standard installation.................... 38 Original types ................................... 24
Interface cable.................................. 93
P
Introduction......................................... 6
Paper................................................ 14
Paper holder arm.......................... 9, 22
L
Language setting.............................. 12 Paper output tray................................ 9
Loading paper .................................. 14 Paper output tray extension ......... 9, 22
Loading paper in the bypass tray ..... 18 Paper tray..................................... 9, 15
Loading the paper tray ..................... 15 Parallel connector......................... 9, 56
Long edge ........................................ 26 Part names......................................... 9
Plug and play screen does not
M
appear .............................................. 76
Main features...................................... 7
Maintenance..................................... 69
Making copies .................................. 20
Margin shift....................................... 34
Margin width..................................... 64
[MENU] key ...................................... 10
MFP driver........................................ 36
Misfeed removal
- Fusing area ................................. 80
- Paper feed area........................... 80
- RSPF........................................... 82
- Transport area............................. 81
Mode indicators................................ 10
[MODE SELECT] key....................... 10
Power cord ......................................... 9
Power off .......................................... 13
Power on .......................................... 12
Power save indicator........................ 10
Power save modes........................... 13
Power switch .......................... 9, 12, 13
Preheat mode................................... 13
Preparations....................................... 9
Printer driver..................................... 36
Printer/scanner functions.................. 57
Problems during setup of
the software...................................... 75
N
Network expansion kit ...................... 92
Normal copying
- Document glass........................... 20
- RSPF........................................... 21
Numeric keys.............................. 10, 23
110
Download from Www.Somanuals.com. All Manuals Search And Download.
R
T
Ready indicator .......................... 11, 12 TD cartridge................................... 9, 84
Reduction/enlargement/zoom .......... 25 TD cartridge replacement................. 84
Removing the software..................... 78 Transfer charger................................. 9
Reversing tray .............................. 9, 82 Tray location indicator ................ 10, 69
Roller rotating knob .......................... 81 [TRAY SELECT] key ............ 10, 18, 23
RSPF.................................................. 9 Troubleshooting................................ 69
RSPF indicator ................................. 10
U
S
USB connector ............................. 9, 55
Scan head locking switch ................. 83 User programs
Scanner driver .................................. 36
Scanning from the operation panel .. 59
- Copy mode.................................. 62
- Print mode................................... 66
Scanning from your computer .......... 60 User settings .................................... 62
Selecting a setting for a user Using the manual ............................... 6
program............................................ 67 Using the printer mode..................... 58
Selecting the tray.............................. 23 Using the scanner mode .................. 59
Set up the software .......................... 36
Setting the number of copies............ 23
Setting up button manager............... 51
Sharpdesk ........................................ 36
Short edge........................................ 26
Side cover .............................. 9, 79, 84
Side cover open button ...................... 9
Sort copy .......................................... 29
Special papers.................................. 15
Specifications ................................... 94
[START] key......................... 11, 20, 21
Stream feeding mode ....................... 22
System configuration........................ 92
System requirements for USB 2.0.... 57
111
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX BY PURPOSE
Preparations
Paper, loading
Connecting the computer
Acrobat Reader, installing ................. 61
- Bypass tray...................................17 Basic procedure for printing .............. 58
- Paper tray..................................... 15 Button Manager, setting up
Power, turn off ...................................13
Power, turn on...................................12
Scan head locking switch,
- Windows 98/Me/2000................... 53
- Windows XP................................. 51
Installing the software........................ 38
releasing............................................ 83 Online manual, using......................... 61
Tray's paper size, setting................... 19 Print job, canceling............................ 58
User program, setting........................62 Printer mode, using ........................... 58
Scanner mode, using ........................ 59
Scanning from your computer ........... 60
Scanning using the keys on
the machine....................................... 59
Making copies
Copying
- Document glass............................ 20
- RSPF............................................ 21
Troubleshooting and maintenance
Enlarging/reducing copies................. 25
Exposure, adjusting........................... 24 Checking the total count.................... 88
Exposure, selecting........................... 24 Cleaning the machine
Setting the number of copies............. 23
Stream feeding mode, using ............. 22
Tray, selecting ...................................23
- Cabinet......................................... 89
- Document glass............................ 89
- Drum cartridge.............................. 91
- RSPF............................................ 89
- Transfer charger........................... 90
Drum cartridge, replacing.................. 87
Misfeeds, removing
- Fusing area .................................. 80
- Paper feed area............................ 80
- RSPF............................................ 82
- Transport area.............................. 81
TD cartridge, replacing...................... 84
Using convenient copy functions
2 IN 1 copying, using
- Document glass............................ 31
- RSPF............................................ 33
Automatic two-sided copying
- Document glass............................ 27
- RSPF............................................ 28
Margin shift, using .............................34
Sort copying, using
- Document glass............................ 29
- RSPF............................................ 30
112
Download from Www.Somanuals.com. All Manuals Search And Download.
mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm
For users in the USA
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
WARNING:
FCC Regulations state that any unauthorized changes or modifications to this
equipment not expressly approved by the manufacturer could void the user’s
authority to operate this equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
G
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
G
G
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
G
m m m m m m m m m m
m m m m m m m m m m m m m m m m m m m m m m m m m m
Shielded cables must be used with this equipment to maintain compliance with
standards.
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Model Number:
FO-DC550
Responsible Party: SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-1163
TEL:
1-800-BE-SHARP
BATTERY DISPOSAL
THIS PRODUCT CONTAINS A LITHIUM PRIMARY MEMORY BACK-UP BATTERY
THAT MUST BE DISPOSED OF PROPERLY. PLEASE CONTACT YOUR LOCAL
SHARP DEALER OR AUTHORIZED SERVICE REPRESENTATIVE FOR
ASSISTANCE IN DISPOSING OF THIS BATTERY.
This product utilizes tin-lead solder, and a fluorescent lamp containing a small
amount of mercury.
Disposal of these materials may be regulated due to environmental
considerations.
For disposal or recycling information, please contact your local authorities or
the Electronics Industries Alliance: www.eia.org
Download from Www.Somanuals.com. All Manuals Search And Download.
FO-DC550
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-1163.
www.sharpusa.com
SHARP CORPORATION
PRINTED IN CHINA
2004E KS1
TINSE1323QSZZ
Printed on 100% post-consumer recycled paper
Download from Www.Somanuals.com. All Manuals Search And Download.
|