Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
CD-SW200 Mini Component System consisting of CD-SW200 (main
unit), CP-S200 (front speaker) and CP-SW200 (Subwoofer).
MINI COMPONENT SYSTEM
MODEL
CD-SW200
OPERATION MANUAL
Accessories
Please confirm that the following accessories are included.
Remote control
1
AM loop antenna
1
FM antenna
1
(RRMCGA042AWSA) (QANTL0005AWZZ)
(92LFANT1746A)
Note:
Only the above accessories are included.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
CD-SW200
1 Read Instructions - All the safety and operating instructions should
10 Ventilation - Slots and openings in the cabinet are provided for venti-
lation and to ensure reliable operation of the product and to protect it
from overheating, and these openings must not be blocked or cov-
ered. The openings should never be blocked by placing the product on
a bed, sofa, rug, or other similar surface. This product should not be
placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions have been
adhered to.
be read before the product is operated.
2 Retain Instructions - The safety and operating instructions should be
retained for future reference.
3 Heed Warnings - All warnings on the product and in the operating
instructions should be adhered to.
4 Follow Instructions - All operating and use instructions should be
followed.
11 Power Sources - This product should be operated only from the type
of power source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your product dealer or
local power company. For products intended to operate from battery
power, or other sources, refer to the operating instructions.
5 Cleaning - Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
12 Grounding or Polarization - This product may be equipped with a
polarized alternating-current line plug (a plug having one blade wider
than the other). This plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
6 Attachments - Do not use attachments not recommended by the prod-
uct manufacturer as they may cause hazards.
7 Water and Moisture - Do not use this product near water - for ex-
ample, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool; and the like.
8 Accessories - Do not place this product on an unstable cart, stand,
tripod, bracket, or table. The product may fall, causing serious injury to
a child or adult, and serious damage to the product. Use only with a
cart, stand, tripod, bracket, or table recommended by the manufac-
turer, or sold with the product. Any mounting of the product should
follow the manufacturer’s instructions, and should use a mounting ac-
cessory recommended by the manufacturer.
Alternate Warnings - This product is equipped with a three-wire
grounding-type plug, a plug having a third (grounding) pin. This plug
will only fit into a grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact your electri-
cian to replace your obsolete outlet. Do not defeat the safety purpose
of the grounding-type plug.
13 Power-Cord Protection - Power-supply cords should be routed so
that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the product.
9 A product and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces
may cause the product and cart combination to over-
turn.
14 Protective Attachment Plug - The product is equipped with an at-
tachment plug having overload protection. This is a safety feature. See
Instruction Manual for replacement or resetting of protective device. If
replacement of the plug is required, be sure the service technician has
used a replacement plug specified by the manufacturer that has the
same overload protection as the original plug.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-SW200
IMPORTANT SAFETY INSTRUCTIONS(continued)
15 Outdoor Antenna Grounding - If an outside antenna or cable system 19 Object and Liquid Entry - Never push objects of any kind into this
is connected to the product, be sure the antenna or cable system is
grounded so as to provide some protection against voltage surges and
built-up static charges.Article810 of the National Electrical Code, ANSI/
NFPA 70, provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to an an-
tenna discharge unit, size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode.
product through openings as they may touch dangerous voltage points
or short-out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
20 Servicing - Do not attempt to service this product yourself as opening
or removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
21 Damage Requiring Service - Unplug this product from the wall outlet
and refer servicing to qualified service personnel under the following
conditions:
Example of antenna grounding as per
National Electrical Code, ANSI/NFPA 70
a) When the power-supply cord or plug is damaged,
b)If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
ANTENNA LEAD IN WIRE
GROUND
CLAMP
d)If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the op-
erating instructions as an improper adjustment of other controls may
result in damage and will often require extensive work by a qualified
technician to restore the product to its normal operation,
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
e) If the product has been dropped or damaged in any way, and
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
f) When the product exhibits a distinct change in performance - this
indicates a need for service.
NEC - NATIONAL ELECTRICAL CODE
S2898A
22 Replacement Parts - When replacement parts are required, be sure
the service technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other
hazards.
16 Lightning - For added protection for this product during a lightning
storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to lightning and
power-line surges.
23 Safety Check - Upon completion of any service or repairs to this prod-
uct, ask the service technician to perform safety checks to determine
that the product is in proper operating condition.
17 Power Lines - An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or power circuits,
or where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be
fatal.
24 Wall or Ceiling Mounting - The product should be mounted to a wall
or ceiling only as recommended by the manufacturer.
25 Heat - The product should be situated away from heat sources such
as radiators, heat registers, stoves, or other products (including ampli-
fiers) that produce heat.
18 Overloading - Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electric shock.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
CD-SW200
Page
ꢀ General Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 - 10
ENERGY STAR® Program Information
ꢀ Preparation for Use
System connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 - 13
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Products that have earned
the ENERGY STAR® are
designed to protect the
environment through
ꢀ Basic Operation
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
superior energy efficiency.
ꢀ CD or MP3/WMA disc Playback
Listening to a CD or MP3/WMA disc . . . . . . . . . . . . . . . . .17 - 20
Advanced CD or MP3/WMA disc playback . . . . . . . . . . . .21 - 23
MP3/WMA navigation (only for MP3/WMA files) . . . . . . . .24 - 27
To comply with the ENERGY STAR® standards mentioned above,
please cancel the demonstration mode, as described on page 13.
ꢀ Radio
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 - 29
ENERGY STAR® is a U.S. registered mark.
ꢀ Tape Playback
Listening to a cassette tape (TAPE 1 or TAPE 2) . . . . . . .30 - 31
ꢀ Tape Recording
Recording on a cassette tape . . . . . . . . . . . . . . . . . . . . . . .31 - 33
ꢀ Advanced Features
Timer and sleep operation . . . . . . . . . . . . . . . . . . . . . . . . .34 - 37
Enhancing your system . . . . . . . . . . . . . . . . . . . . . . . . . . .38 - 39
ꢀ References
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 - 41
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 - 43
CONSUMER LIMITED WARRANTY . . . . . . . . . . . . . .Back cover
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
CD-SW200
ꢀ General
ꢁHold the AC power plug by the head when
removing it from the AC outlet, as pulling
the cord can damage internal wires.
ꢁPlease ensure that the equipment is positioned in a well ventilated
area and ensure that there is at least 4" (10 cm) of free space
along the sides, top and back of the equipment.
ꢁDo not remove the outer cover, as this
may result in electric shock. Refer inter-
nal service to your local SHARP service
facility.
4" (10 cm) 4" (10 cm)
4" (10 cm)
4" (10 cm)
Table
Floor
ꢁ
This unit should only be used within the range of 41
35 C)
˚F - 95˚F (5˚C -
ꢁDo not place subwoofer system on the
same surface as main unit to prevent
sound interruption during playback.
ꢁUse the unit on a firm, level surface free from
vibration.
˚
Warning:
The voltage used must be the same as that specified on this unit. Us-
ing this product with a higher voltage other than that which is speci-
fied is dangerous and may result in a fire or other type of accident
causing damage. SHARP will not be held responsible for any dam-
age resulting from use of this unit with a voltage other than that which
is specified.
ꢁKeep the unit away from direct sunlight,
strong magnetic fields, excessive dust,
humidity and electronic/electrical equip-
ment (home computers, facsimiles, etc.)
which generate electrical noise.
ꢀ Volume control
The sound level at a given volume setting depends on speaker effi-
ciency, location, and various other factors. It is advisable to avoid ex-
posure to high volume levels, which occurs while turning the unit on
with the volume control setting up high, or while continually listening
at high volumes.
ꢁDo not place anything on top of the unit.
ꢁDo not expose the unit to moisture, to temperatures higher than
140˚F (60˚C) or to extremely low temperatures.
ꢁIf your system does not work properly, disconnect the AC power
cord from the AC outlet. Plug the AC power cord back in, and then
turn on your system.
ꢁIn case of an electrical storm, unplug the
unit for safety.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and indicators
CD-SW200
ꢀ Front panel
Reference page
1. Disc Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2. Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
3. Power On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . 15
4. Disc Track Up or Fast Forward,Tape 2 Fast Forward,
Tuner Preset Up,Time Up Button . . . . . . . . . . . 16, 19, 29, 31
5. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . 16, 34, 37
6. Tuning Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
7. Tuning Down Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
8. Disc Track Down or Fast Reverse,Tape 2 Rewind,
1
2
13
14
15
3
Tuner Preset Down,Time Down Button . . . . . . 16, 19, 29, 31
9. Equalizer Mode Select Button . . . . . . . . . . . . . . . . . . . . . . 15
10. Tape 1 Cassette Compartment . . . . . . . . . . . . . . . . . . . . . . 30
11. Headphone Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
12. Game/Video Input Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
13. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 18
14. Disc Direct Play Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
15. Disc Tray Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . 18
16. Disc Play or Repeat,Tape Play Button . . . . . . . . . . 18, 22, 30
17. Memory/Set Button . . . . . . . . . . . . . . . . . . . 16, 23, 29, 34, 37
18. Tape 2 Record Pause Button . . . . . . . . . . . . . . . . . . . . 32, 33
19. Disc or Tape Stop Button . . . . . . . . . . . . . . . . . . . . . . . 19, 31
20. Extra Bass (Surround)/Demo Mode Button . . . . . . . . . 13, 15
21. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
22. Tape 2 Cassette Compartment . . . . . . . . . . . . . . . . . . . . . . 30
23. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
24. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
25. Tape (1 2) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
26. Game/Video Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
16
17
18
4
5
6
7
19
8
20
21
22
9
10
11
23 24 25 26
12
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-SW200
Controls and indicators (continued)
ꢀ Display
Reference page
1
2
3
4
5
6
7
8
9
1. Disc Number Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2. MP3/WMA Folder Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 24
3. MP3/WMA Title Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4. MP3 Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5. WMA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
6. Sleep Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
7. Timer Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
8. Timer Recording Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 35
9. Tape 2 Record Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
10. MP3/WMA Total Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 25
11. Daily Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
12. FM Stereo Mode Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 28
13. FM Stereo Receiving Indicator . . . . . . . . . . . . . . . . . . . . . . 28
14. Tape Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
15. Memory Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 27, 29
16. Extra Bass Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
17. Disc Repeat Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 22
18. Disc Pause Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
19. Disc Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
11 12 13
16 17
10
14
18
19
15
3
4
ꢀ Rear panel
5
6
Reference page
1. Cooling Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2. AC Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3. FM 75 Ohms Antenna Terminal . . . . . . . . . . . . . . . . . . . . . . 12
4. FM Antenna Ground Terminal . . . . . . . . . . . . . . . . . . . . . . . 12
5. AM Loop Antenna Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6. Subwoofer Light-up Jack . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7. Video Out Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
8. Subwoofer Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
9. Front Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
7
8
1
9
2
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-SW200
ꢀ Front Speaker
1. Tweeter
2. Super Tweeter
3. Woofer
4. Bass Reflex Duct
5. Speaker Wire
1
2
4
5
3
ꢀ Subwoofer
1. Subwoofer
2. Bass Reflex Duct
3. Subwoofer Light-Up Wire
4. Speaker Wire
1
2
4
3
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-SW200
Controls and indicators (continued)
ꢀ Remote control
1
Reference page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . 14
2. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 18
3. Cursor Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4. Character Input/Disc Direct Search Buttons . . . . . . . . 21, 26
5. Equalizer Mode Select Button . . . . . . . . . . . . . . . . . . . . . . . 15
6. Extra Bass (Surround) Button . . . . . . . . . . . . . . . . . . . . . . . 15
7. Power On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . 15
8. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
9. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
10. Tape (1 2) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
11. Game/Video Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
12. Volume Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . 15
13. Disc Clear/Dimmer Button . . . . . . . . . . . . . . . . . . . . . . . 15, 23
14. Disc Random Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
15. Disc Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
16. Tape Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
17. Memory Button . . . . . . . . . . . . . . . . . . . . 16, 23, 27, 29, 34, 37
18. Disc Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
19. Disc Play or Repeat Button . . . . . . . . . . . . . . . . . . . . . . 18, 22
20. Tape Play Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
21. Tape 2 Record Pause Button . . . . . . . . . . . . . . . . . . . . 32, 33
22. MP3/WMA Navigation Mode Select Button . . . . . . . . . . . . 25
23. MP3/WMA Display Button . . . . . . . . . . . . . . . . . . . . . . . . . . 20
24. Enter Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
25. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . 16, 34, 37
26. Character Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
27. Disc Track Down or Fast Reverse,Tape Rewind,
7
8
9
13
14
15
17
C D
2
18
19
20
21
10
11
3
16
22
23 24
4
25 26 27 28
5
6
12
Tuner Preset Down,Time Down Button . . . . . . 16, 19, 29, 31
28. Disc Track Up or Fast Forward,Tape Fast Forward,
Tuner Preset Up,Time Up Button . . . . . . . . . . . 16, 19, 29, 31
10
Download from Www.Somanuals.com. All Manuals Search And Download.
System connections
CD-SW200
Make sure to unplug the AC power cord before any connections.
Antenna connection (see page 12)
AM loop antenna
FM antenna
Left speaker
Subwoofer
Right speaker
Speaker connection
(see page 12)
AC Outlet
(AC 120 V, 60 Hz)
AC power connection (see page 13)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-SW200
System connections (continued)
ꢀ Antenna connection
Supplied FM antenna:
ꢀ Speaker connection
FRONT SPEAKERS:
Connect the black wire to the FRONT SPEAKERS minus (-) terminal,
and the red wire to the FRONT SPEAKERS plus (+) terminal.
SUBWOOFER:
Connect the FM antenna wire to the FM 75 OHMS terminal and po-
sition the FM antenna wire in the direction where the strongest signal
can be received.
1. Connect the black wire to the SUBWOOFER minus (-) terminal,
and the red wire with purple insulation tube to the SUBWOOFER
plus (+) terminal.
Supplied AM loop antenna:
Connect the AM loop antenna to the AM LOOP jack. Position the AM
loop antenna for optimum reception. Place the AM loop antenna on
a shelf, etc., or attach it to a stand or a wall with screws (not sup-
plied).
Red
Black
Red
Black
ANTENNA
AM
2. Connect the subwoofer light-up wire to the SUBWOOFER
LIGHT-UP jack.
LOOP
FM
75 OHMS
GND
SUBWOOFER
Note:
Caution:
Placing the antenna on the unit or near the AC power cord may
cause noise pickup. Place the antenna away from the unit for better
reception.
ꢁNever mistake the FRONT SPEAKERS and the SUBWOOFER
terminals. The unit or the speakers may be damaged.
ꢁIf you use other speakers with an impedance lower than that
specified, the unit may be damaged. Front speakers: 6 ohms,
Subwoofer: 12 ohms.
Installing the AM loop antenna:
< Assembling >
< Attaching to the wall >
ꢁDo not mistake the right and the left
channels. The right speaker is the one on the
right side when you face the unit.
ꢁDo not let the bare speaker wires touch
each other.
ꢁDo not stand or sit on the speakers. You may
be injured.
Wall Screws (not supplied)
ꢁDo not allow any objects to fall into or to be
Incorrect
placed in the bass reflex duct.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-SW200
ꢀ Placing the speaker system
ꢀ Demonstration mode
The left and right speakers have individual shapes. For best perfor-
mance, place the speakers according to the diagram below.
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll and the sub-
woofer will light up in flashing mode.
Left speaker Main unit Right speaker
Subwoofer
To cancel the demonstration mode:
When the unit is in the power stand-
by mode (demonstration mode),
press the X-BASS (SURROUND)/
DEMO button. The unit will enter the
low power consumption mode and
the subwoofer light up will be off.
Table
Floor
Note:
The speaker grilles are not removable.
ꢀ AC power connection
After checking all the connections have been made correctly, plug
the AC power cord of this unit into the AC outlet. If you plug in the unit
first, the unit will enter the demonstration mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS
(SURROUND)/DEMO button again.
Note:
When the power is on, the X-BASS (SURROUND)/DEMO button can
be used to select the extra bass mode.
AC outlet
(AC 120 V, 60 Hz)
ꢀ Outdoor FM antenna
Use an outdoor FM antenna if you require better reception.
Consult your dealer.
Notes:
ꢁThe unit will start the tape initialization when plugged in to the AC
outlet. During this process, initializing sound will be heard and the
unit cannot be turned on. Wait until the process is finished.
ꢁUnplug the AC power cord from the AC outlet if the unit will not be
in use for a prolonged period of time.
Outdoor FM antenna
Cooling fan:
The main unit is built with a cooling fan at the rear of the unit for im-
proved cooling. Please do not cover the opening of the fan with any
obstacles, as this will block proper ventilation.
75 ohms
coaxial cable
Note:
When an outdoor FM antenna is used, disconnect the supplied FM
antenna wire.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
CD-SW200
Notes concerning use:
ꢁReplace the batteries if the operating distance is reduced or if the
operation becomes erratic.
ꢁPeriodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
ꢁExposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit.
ꢁKeep the remote control away from moisture, heat, shock, and vi-
brations.
ꢀ Battery installation
Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.
1
2
Open the battery cover.
Insert the batteries according to the direction indicated in
the battery compartment.
When inserting or removing the batteries, push them toward the
battery terminals.
Close the battery cover.
3
ꢀ Test of the remote control
Check the remote control after checking all the connections (see
pages 11 - 13).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy music.
Remote sensor
Precautions for battery use:
ꢁReplace all old batteries with new ones at the same time.
ꢁDo not mix old and new batteries.
ꢁRemove the batteries if the unit will not be used for long periods
of time. This will prevent potential damage due to battery leakage.
8" - 20"
(0.2 m - 6 m)
Caution:
ꢁDo not use rechargeable batteries (nickel-cadmium battery, etc.).
ꢁInstalling the batteries incorrectly may cause the unit to malfunc-
tion.
Battery removal:
Open the battery cover and pull up the battery to take out.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
General control
CD-SW200
ꢀ Volume control
Main unit operation:
When the VOLUME control is turned
clockwise, the volume will increase.
When it is turned counterclockwise, the
volume will decrease.
.....
CD-SW200
0
30 MAXIMUM
Remote control operation:
Press the VOLUME (+ or -) button to in-
crease or decrease the volume.
ꢀ New Surround Mode
When the X-BASS (SURROUND)/
DEMO [X-BASS (SURROUND)] button
is pressed, the unit will enter the sur-
round mode and adjust low bass and
high frequency automatically according
to volume input. To cancel this mode,
press the X-BASS (SURROUND)/
DEMO[X-BASS (SURROUND)] button
again.
ꢀ Equalizer
When the power is first turned on, the unit will enter FLAT mode.
When the EQUALIZER (EQUALIZER MODE) button is pressed, the
current mode setting will be displayed. To change to a different
mode, press the EQUALIZER (EQUALIZER MODE) button repeat-
edly until the desired sound mode appears.
ꢀ To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
In CD/TUNER/TAPE mode
In GAME/VIDEO mode
Press the ON/STAND-BY button to enter the power stand-by mode.
No equalization.
For rock music.
For classical music.
For pop music.
Vocals are enhanced.
For jazz.
FLAT
ROCK
FLAT
No equalization.
For rock music.
ꢀ Illumination light control
ROCK
When the power is turned on, light illuminates around the display.
To turn on/off the light, hold down the CLEAR/DIMMER button on
the remote control for 2 seconds or more.
CLASSIC
POPS
CLASSIC For classical music.
ACTION For action games.
SPORTS For sports games.
ꢀ Subwoofer light up control
The subwoofer will light up according to the level of the music
source played back. To turn on/off the light, hold down the CLEAR/
DIMMER button on the remote control for 2 seconds or more.
VOCAL
JAZZ
For car racing games.
RACING
ꢀ Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or
higher, the volume starts at 16 and fades in to the last set level.
Note:
If the EQUALIZER (EQUALIZER MODE) button is pressed in the
surround mode, it will be canceled automatically.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock
CD-SW200
5 Press the
or
button to adjust the hour and
then press the MEMORY/SET button.
CD-SW200
Press the
or
button once to advance the time by
1 hour. Hold it down to advance continuously.
6 Press the
or
button to adjust the minutes and
then press the MEMORY/SET button.
In this example, the clock is set for the 12-hour (AM 12:00) display.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
Press the
or
button once to advance the time by
1 minute. Hold it down to change the time in 5-minute intervals.
To confirm the time display:
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button.
3 Within 10 seconds, press the
or
button to se-
The time display will appear for about 10 seconds.
lect "CLOCK", and press the MEMORY/SET button.
[When the power is on]
Press the CLOCK/TIMER button.
Within 10 seconds, press the
time.
or
button to display the
The time display will appear for about 10 seconds.
4 Press the
or
button to select 12-hour or 24-
Note:
hour display and then press the MEMORY/SET button.
The "CLOCK" will appear or time will flash to confirm the time dis-
play when the AC power supply is restored after a power failure or
unplugging the unit. If incorrect, readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from step 1. If the "CLOCK" does not
appear in step 3, step 4 (for selecting the 12-hour or 24-hour dis-
play) will be skipped.
"AM 12:00"
"AM 0:00"
"0:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
To change the 12-hour or 24-hour display:
1
Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 41 for details.]
Perform "Setting the clock" from step 1.
The 24-hour display will appear.
(0:00 - 23:59)
2
Note:
The clock can also be set with the remote control.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a CD or MP3/WMA disc
CD-SW200
This system can play back a standard CD, CD-R/RW in the CD format
and CD-R/RW with MP3 or WMA files, but cannot record on them.
Auto power on function:
When you press any of the following buttons, the unit turns on.
Some audio CD-R and CD-RW discs may not be playable due to the ꢁCD button (main unit and remote control): The unit turns on and
state of the disc or the device that was used for recording.
the "CD" function is activated.
ꢁCD
/
button on the remote control: The unit turns on and CD
MP3:
playback starts (regardless of the last function).
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3.
ꢁ
/
button on the main unit: The unit turns on and playback of
the last function starts (CD,TAPE,TUNER,GAME/VIDEO).
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
in sound quality.
ꢁThis system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and
VBR files.
ꢁDuring VBR file playback, time counter in the display may differ
from its actual playback time.
Auto power off function:
In the stop mode of CD, MP3 or WMA operation, the main unit enters
the stand-by mode after 15 minutes of inactivity.
.
WMA:
WMA files are Advanced System Format files that include audio
files which are compressed with Windows Media Audio codec.
WMA is developed by Microsoft as an audio format file for Win-
dows Media Player.
ꢁ"MP3" or "WMA" indicator will light up after the unit reads infor-
mation on an MP3 or WMA disc.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-SW200
Listening to a CD or MP3/ WMA disc (continued)
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Press the
1 button and within 5 seconds, press the
OPEN/CLOSE button to open the disc tray 1.
4 Place the disc on the disc tray 1, label side up.
CD-SW200
Be sure to place 3" (8 cm) disc in the middle of the disc trays.
5" (12 cm) 3" (8 cm)
5 Press the OPEN/CLOSE button to close the disc tray 1.
MP3 indicator
WMA indicator
[CD]
[MP3/WMA]
Total number of
tracks on the disc time of the disc of folders
Total playing
Total number Total number
of files
ꢁDue to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
6 You can place discs on the trays 2 - 5 by following steps
3 - 5.
7 Press the
/
button to start playback.
Disc play indicator
18
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-SW200
ꢁPlayback will begin from track 1 on disc 1. After that disc finishes
playing, the next disc will automatically play.
ꢁAfter the last track on the fifth disc is played, the unit will stop au-
tomatically.
ꢁWhen there is no disc in one of the disc trays (1 - 5), the empty
tray will be skipped to the next tray with a disc.
ꢀ Various disc functions
Function
Main unit
Remote
control
Operation
Play
Press in the stop
mode.
To exchange other discs while playing a disc:
Press one of the 1 - 5 buttons for the stopped disc and within 5
seconds, press the OPEN/CLOSE button and exchange discs.
Stop
Press in the playback
mode.
To remove the discs:
In the stop mode, press the 1 - 5 button and within 5 seconds,
press the OPEN/CLOSE button.
Pause
Press in the playback
mode. Press the
/
Caution:
button to resume play-
back from the paused
point.
Press in the playback
or stop mode.
ꢁDo not place two discs in one disc tray.
ꢁDo not play discs of special shapes (heart, octagon, etc.) as it
may cause malfunctions.
Track up/
Track down
ꢁDo not push the disc tray while it is moving.
ꢁIf the power fails while the tray is open, wait until the power is re-
stored.
ꢁIf the disc tray is stopped with force, "ER-CD20" will appear on the
display for 3 seconds and the unit will not function. If this occurs,
press the ON/STAND-BY button to enter the power stand-by
mode and then turn the power on again.
If you press the button
in the stop mode,
press the
/
button
to start the desired
track.
ꢁIf TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
ꢁIf a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play.
Fast for-
ward/Fast
reverse
Press and hold down
in the playback mode.
Release the button to
resume playback.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-SW200
Listening to a CD or MP3/ WMA disc (continued)
Notes for CD:
ꢀ To change the display (MP3/WMA discs only)
ꢁTrack up/track down is possible only within individual discs.
ꢁFast forward/fast reverse is possible only within individual discs.
ꢁWhen the end of the last track is reached during fast forward,
"END" will appear on the display and CD operation will be paused.
When the beginning of the first track is reached during fast
reverse, the unit will enter the playback mode.
While a disc is playing, press the DISPLAY
button.
Each time the button is pressed, the display
will change as follows.
Notes for MP3/WMA discs:
ꢁTrack up/track down is possible only within individual discs.
ꢁThe sound is heard during fast forward/fast reverse with a CD, but
not with an MP3/WMA disc. For fast forward or fast reverse of an
MP3/WMA disc, refer to playback time on the display.
ꢁFast forward/fast reverse is possible only within individual tracks.
ꢁWhen the end of the track is reached during fast forward, the next
track will be played. Playback of the track will begin when its be-
ginning is reached during fast reverse.
Track number
Elapsed
Folder name
playback time
File name
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced CD or MP3/WMA disc playback
CD-SW200
ꢀ To specify a disc to play
ꢀ Direct track search
You can play a disc by specifying the disc number.
By using the direct search buttons, the desired tracks on the current
disc can be played.
1 Press one of the 1 - 5 buttons to select the desired disc.
Use the direct search buttons on
the remote control to select the de-
sired track while playing the se-
lected disc.
Selected track number
Selected disc number
ꢁThe direct search buttons allow you to select up to number 9.
2 Within 5 seconds, press the DIRECT PLAY button on the
ꢁWhen selecting number 10 or higher, use the "+10" button.
main unit.
A. For example, to choose 13
1 Press the "+10" button once.
2 Press the "3" button.
B. For example, to choose 30
1 Press the "+10" button three times.
2 Press the "0" button.
CD-SW200
ꢁPlayback will begin from track 1 on the chosen disc.
ꢁAfter the last track on the chosen disc is played, the unit stops
automatically.
If the direct search buttons are pressed while the disc is stopped,
press the
/
button to start the desired track on the current disc.
Notes:
Note:
ꢁA track number higher than the number of tracks on the disc can-
not be selected.
If a disc tray with no disc is selected, playback will not start and the
disc indicator will go out.
ꢁDuring random play, direct search is not possible.
To stop playback:
Press the (CD ) button.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-SW200
Advanced CD or MP3/WMA disc playback (continued)
ꢀ Repeat play
Repeat play can play all 5 discs, all tracks on a chosen disc, or a pro-
grammed sequence continuously.
ꢀ Random play
The tracks on the disc(s) can be played in random order automatically.
To random play all tracks on up to 5 discs:
To repeat all tracks on up to 5 discs:
Press the RANDOM button on the remote control.
Press the
/
button twice.
To repeat desired tracks:
Perform steps 1 - 6 in "Programmed play" section on page 23 and
then press the
/
button twice.
To cancel random play:
Press the
/
button.
"R" will go out.
To random play all tracks on the chosen disc:
1 Press one of the 1 - 5 but-
tons.
To cancel repeat play:
Press the button again.
" will go out.
/
"
2 Within 5 seconds, press the DI-
RECT PLAY button.
3 Press the RANDOM button on
the remote control.
To repeat all tracks on the chosen disc:
1 Press one of the 1 - 5 buttons.
2 Within 5 seconds, press the DIRECT PLAY
button twice.
To cancel random play:
Press the DIRECT PLAY button.
"R" will go out.
To cancel repeat play:
Press the DIRECT PLAY button again.
" will go out.
Notes:
ꢁIf you press the
button during random play, you can move to
"
the next track by the random operation. On the other hand, the
button does not allow you to move to the previous track. The be-
ginning of the track being played will be located.
ꢁIn random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the (CD
) button. Otherwise, the disc(s) will play continuously.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-SW200
ꢀ Programmed play
To clear the programmed selections:
Press the CLEAR/DIMMER button on the re-
mote control while the "MEMORY" indicator
is flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed.
You can choose up to 32 selections for playback in the order you like.
1 While in the stop mode, press the
MEMORY/SET (MEMORY) button
to enter the programming save
mode.
To cancel the programmed play mode:
While in the stop mode and the "MEMORY" indicator is lit, press the
CLEAR/DIMMER button on the remote control. The "MEMORY" in-
dicator will disappear and all the programmed contents will be
cleared.
2 Press one of the 1 - 5 buttons
to select the desired disc.
Adding tracks to the program:
If a program has been previously stored, the "MEMORY" indicator
will be displayed. Then follow steps 1 - 6 to add tracks. The new
tracks will be stored after the last track of the original program.
Selected disc number
3 Press the direct search buttons
on the remote control to select
the desired track.
To check which tracks are programmed:
While the unit is stopped in the programmed play mode, press the
or
button.
Selected track number
You can also select a track by pressing the
or
button.
Notes:
ꢁWhen a disc with programmed tracks is ejected, the program is
automatically canceled.
ꢁEven if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the programmed
selections will not be cleared.
ꢁDuring the program operation, random play is not possible.
ꢁDuring programmed play, the DIRECT PLAY button will not work.
4 Press the MEMORY/SET (MEMO-
RY) button to save the track
number.
5 Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR/DIMMER button.
6 Press the (CD ) button.
The total number in memory will ap-
pear.
7 Press the
/
button to start playback.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA navigation (only for MP3/WMA files)
CD-SW200
MP3/WMA navigation:
You can search and play files by folder or title. For example, when
you assign three titles to a file, enter genre (such as jazz) as title 1,
album name as title 2, and music title as title 3 to search the file by
any title.
ꢁYou can search and play files by folder or title 1/2/3 within one
MP3/WMA disc (see page 25).
ꢁBy entering a name, you can search files by folder or title 1/2/3
within one MP3/WMA disc (see page 26).
ꢁFolders or titles can be programmed within one MP3/WMA disc
(see page 27).
When you enter file names on your PC, connect words with hyphens.
This product recognizes the first word as title 1, second one as title
2, and third one as title 3. Up to three words can be recognized.
Folder
Title 2
Title 1
Title 3
Example:
Folder
(File name)
Title 2
Title 1
Title 3
AAA
(POPULAR-HITS 1-A MUSIC.mp3)
(POPULAR-HITS 2-B MUSIC.mp3)
BBB
CCC
(JAZZ-HITS 1-A MUSIC.mp3)
(JAZZ-HITS 2-B MUSIC.mp3)
Notes:
ꢁMP3 files must have the extension ".mp3".
ꢁWMA files must have the extension ".wma".
ꢁUp to 100 folders or 300 files can be read on the unit. If either limit
is exceeded, no more folders/files are displayed.
ꢁThis unit recognizes and displays up to 48 characters for folder
names, and up to 32 characters for title 1/2/3.
(ROCK-HITS 1-A MUSIC.mp3)
(ROCK-HITS 2-B MUSIC.mp3)
(ROCK-HITS 3-C MUSIC.mp3)
(ROCK-HITS 4-D MUSIC.mp3)
ꢁAll file/folder names appear in uppercase.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-SW200
ꢀ File search (by folder or title 1/2/3)
You can search and play files by folder or title 1/2/3 within one MP3/
WMA disc.
7 Use the or cursor button to scroll and select a folder
(or title), and then press the ENTER button.
1 Press one of the
1 -
5 buttons to select a disc tray
Folder name
containing an MP3/WMA disc.
2 Press the button, and the unit starts to read the MP3
/
disc.
If you press the
files in the selected folder (or title) are played.
/
button instead of the ENTER button, all
3 Press the CD button to stop playback.
"NAVI READ" appears and the display shows the total number
of folders and files on the selected disc.
8 Use the or cursor button to scroll and select a file.
MP3 indicator
WMA indicator
File name
Total number Total number
of folders
of files
9 Press the
/
button to start playback.
4 Press the NAVIGATION button.
The unit plays from the selected file to the last file in the select-
ed folder (or title), and the previous display returns.
5 Press the
,
,
or
cursor but-
Folder Title 1
ton on the remote control to select
"FOL", "T-1", "T-2" or "T-3". To
search files by folder name, select
"FOL" (will flash).
File search by title 1/2/3:
ꢁIn step 5, select "T-1", "T-2" or "T-3" and follow the same steps as
file search by folder.
MP3
ꢁThe unit searches all files on the disc, regardless of the folder.
Title 2 Title 3
The following steps describe file search by folder:
6 Press the ENTER button.
To stop playback:
Press the CD button.
The total number of folders (or titles) appears for 2 seconds,
and names of the first 2 folders (or titles) are displayed.
To exit the MP3/WMA navigation mode:
In the stop mode, press the CD button.
Folder name
Notes:
ꢁIn the MP3/WMA navigation mode, direct play and direct search
functions are disabled.
ꢁIf a folder, title or file name does not appear, or appears incorrect-
ly, remove and reinsert the disc and try again.
ꢁIf you press the RANDOM button in the stop mode, the MP3/WMA
navigation mode will be canceled.
ꢁ
The NAVIGATION button allows you to go one step back.
ꢁPress the DISPLAY button to
check the number of files.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-SW200
MP3/WMA navigation (only for MP3/WMA files) (continued)
ꢀ Character search (for folder or title 1/2/3)
By entering a name, you can search files by folder or title 1/2/3 within
one MP3/WMA disc.
8 When finished, press the ENTER button. The unit searches
for the same name within folders (or titles).
1 Perform steps 1 - 3 in "File search (by folder or title 1/2/3)"
on page 25.
2 Press the NAVIGATION button.
If the search word is not in the folder (or title) name, "NOT
FOUND" appears and the menu returns.
3 Press the
,
,
or
cursor
Folder Title 1
9 Use the or cursor button to scroll and select a folder
(or title).
button on the remote control to
select "FOL", "T-1", "T-2" or "T-3".
To search files by folder name,
select "FOL" (will flash).
10Press the
/
button to start playback.
Title 2 Title 3
All files in the selected folder (or title) are played, and the previ-
ous display returns.
4 Press the CHARACTER button for 2 seconds.
The display will be ready for editing characters.
1st row: String table
To exit the MP3/WMA navigation mode:
In the stop mode, press the CD button
Notes:
2nd row: Input editor (8 digits)
ꢁThe unit searches regardless of the case, and names found will
appear in uppercase.
ꢁSome symbols do not appear properly.
5 Press the
or
or
cursor button to select the desired
Character entry with direct buttons:
alphabet.
The direct buttons on the remote
control can also be used for charac-
ter entry.
In step 5 on the left, use buttons 0 -
9 to enter alphabets.
Alphabet types change as you
press a button.
Press the
display.
button to go to the next page of character
6 Press the CHARACTER button and the active character will
be entered in the 2nd row of the display.
For example, press "2" four times to enter "C".
To delete an entered character, move the cursor to the charac-
ter with the or button and press the CLEAR/DIMMER but-
ton on the remote control.
2
A
B
C
Characters:
7 Repeat steps 5 and 6 to enter characters.
In the folder (or title) name search, you do not have to enter the
full name. The unit searches for names beginning with the en-
tered characters.
1
2 ABC 3 DEF 4 GHI 5 JKL 6 MNO 7 PQRS 8 TUV 9 WXYZ
0
: indicates a space.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-SW200
To check, add or delete programmed contents:
In the stop mode, select a folder (or title) with the or cursor but-
ton. If the folder (or title) is programmed, "MEMORY" flashes.
ꢀ Programmed play (for folder, title 1/2/3)
Folders or titles can be programmed within one MP3/WMA disc.
Folder, title 1, title 2 and title 3 cannot be programmed together si-
multaneously.
1 Perform steps 1 - 3 in "File search (by folder or title 1/2/3)"
Flashes if the folder (or title)
is programmed
on page 25.
2 Press the NAVIGATION button.
3 Press the
,
,
or cursor button on the remote control
to select "FOL", "T-1", "T-2" or "T-3" and then press the
ENTER button.
ꢁWhen you press the MEMORY button with "MEMORY" flashing,
the folder (or title) is removed from the program.
ꢁIf you press the MEMORY button with "MEMORY" off, the folder
(or title) is added to the program.
ꢁTo clear all programs, press the CLEAR/DIMMER button in the
stop mode.
The total number of folders (or titles) appears for 2 seconds,
and names of the first 2 folders (or titles) are displayed.
4 Press the or cursor button to select the desired folder
(or title) and then press the MEMORY button.
To exit the MP3/WMA navigation mode:
In the stop mode, press the CD button.
ꢁThe programmed contents are cleared.
Notes:
ꢁThe programmed contents are cleared when you eject a disc,
play another disc, switch the function, or enter the stand-by mode
with the ON/STAND-BY button.
ꢁDuring programmed play, the DIRECT PLAY button on the main
unit will not work.
ꢁIf you press the RANDOM button in the stop mode, the MP3/
WMA navigation mode will be canceled.
The folder (or title) is memorized with all the files.
5 Repeat step 4 for other folders (or titles).
Up to 10 folders (or 10 titles) can be programmed.
6 Press the
/
button to start playback.
If tracks are programmed using track numbers (see "Pro-
grammed play" on page 23):
In the MP3/WMA navigation mode, only program by folder (or title)
name are played. When you exit the mode, the program by folder (or
title) name are cleared.
When you exit the MP3/WMA navigation mode, program by track
number are canceled.
(Program by track number are cleared when you remove the disc.)
Programmed play will always start from the smallest folder (or
title) number.
To stop playback:
Press the CD button.
ꢁThe programmed contents are not cleared.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the radio
CD-SW200
ꢀ Tuning
1 Press the ON/STAND-BY button to turn the power on.
2 Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
3 Press the TUNING ( or ) button to tune in to the desired
station.
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
Notes:
ꢁWhen radio interference occurs, auto scan tuning may stop auto-
matically at that point.
ꢁAuto scan tuning will skip weak signal stations.
ꢁTo stop the auto tuning, press the TUNING button again.
Auto power on function:
When you press any of the following buttons, the unit turns on.
ꢁTUNER (BAND) button (main unit and remote control): The unit
turns on and the "TUNER" function is activated.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
ꢁ" " will appear when an FM broadcast is in stereo.
ꢁIf the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monaural,
and the sound becomes clearer.
ꢁ
/
button on the main unit: The unit turns on and playback of
the last function starts (CD, TAPE, TUNER, GAME/VIDEO).
FM stereo mode indicator
FM stereo receiving indicator
28
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-SW200
ꢀ Memorizing a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
ꢀ To recall a memorized station
Press the PRESET ( or ) button for less than 0.5 seconds to se-
lect the desired station.
ꢀ To scan the preset stations
The stations saved in memory can be scanned automatically. (Pre-
set memory scan)
1 Perform steps 1 - 3 in "Tuning" on page 28.
2 Press the MEMORY/SET (MEMORY) button to enter the
preset tuning saving mode.
1
Press the PRESET ( or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2
Press the PRESET ( or ) button again when the desired sta-
tion is located.
3 Within 30 seconds, press the PRESET ( or ) button to
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
CD-SW200
4 Within 30 seconds, press the MEMORY/SET (MEMORY)
button to store that station in memory.
If the "MEMORY" and preset number indicators go out before
the station is memorized, repeat the operation from step 2.
PRESET
5 Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
When a new station is stored in memory, the station previously
memorized for that preset channel number will be erased.
ꢀ To erase entire preset memory
1
2
Press the ON/STAND-BY button to enter the stand-by mode.
While pressing down the button and the X-BASS (SUR-
Note:
ROUND)/DEMO button, press the TUNING button until "TUN-
ER CL" appears.
The backup function protects the memorized stations for a few hours
should there be a power failure or the AC power cord become discon-
nected.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a cassette tape (TAPE 1 or TAPE 2)
CD-SW200
ꢀ Tape playback
Before playback:
ꢁFor playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not rec-
ommended.)
ꢁDo not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
1 Press the ON/STAND-BY button to turn the power on.
2 Open the cassette com-
partment by pushing the
area marked " ".
ꢁBefore loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
3 Load a cassette into the
TAPE 1 compartment or
TAPE 2 compartment with
the side to be played fac-
ing toward you.
TAPE 1
TAPE 2
CD-SW200
4 Press the TAPE (1
2) button to select the cassette you
want to listen to.
5 Press the
/
button to
start playback.
Tape play indicator
Auto power on function:
When you press any of the following buttons, the unit turns on.
ꢁTAPE button (main unit and remote control): The unit turns on and
the "TAPE" function is activated.
ꢁTAPE button on the remote control: The unit turns on and play-
back starts (regardless of the last function).
ꢁ
/
button on the main unit: The unit turns on and playback of
the last function starts (CD,TAPE,TUNER,GAME/VIDEO).
Auto power off function:
In the stop mode of tape operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording on a cassette tape
CD-SW200
ꢀ Various tape functions
Before recording:
ꢁWhen recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
Function
Main unit
Remote
control
Operation
ꢁSHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
Playback
Press in the stop
mode.
ꢁThe volume and sound controls can be adjusted with no effect
on the recorded signal (Variable Sound Monitor).
Stop
Press in the playback,
fast forward or rewind
mode.
ꢁFor recording, use only normal tapes. Do not use metal or
CrO tapes.
Erase-prevention tab of cassette tapes:
Fast
forward/
Rewind
Press in the playback
or stop mode.
ꢁWhen recording on a cassette tape, make sure that the erase-
prevention tabs are not removed. Cassettes have removable
tabs that prevent accidental recording or erasing.
(TAPE 2
only)
ꢁTo protect the recorded sound, remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape with-
out the tab.
Side A
Caution:
ꢁTo remove the cassette, press the (TAPE ) button, and then
open the compartment.
ꢁBefore changing from one tape operation to another, press the
(TAPE ) button.
ꢁIf a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not open.
In this case, wait until the power is restored.
Tab for side A
Tab for side B
31
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-SW200
Recording on a cassette tape (continued)
ꢀ Recording from a CD or MP3/WMA disc
You can record the desired disc using the DIRECT PLAY button.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
4 Press the
button.
Recording will be paused.
5 Press one of the 1 - 5 buttons to select the desired disc.
6 Within 5 seconds, press the DIRECT PLAY button to start
recording.
ꢁRecording is started from the selected disc. When the play-
back of the last track is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
ꢁPlayback of the disc will start approximately 7 seconds after
the tape starts.
To stop recording:
Press the (TAPE ) button.
The disc and tape will stop.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-SW200
Recording from several CDs continuously:
ꢀ Dubbing from tape to tape
1 Perform steps 1 - 5 in "Recording from a CD or MP3/WMA disc"
on page 32.
You can record from TAPE 1 to TAPE 2.
1 Press the ON/STAND-BY button to turn the power on.
2 Within 5 seconds, press the
/
(
) button to start recording.
2 Load
a
prerecorded cassette
To perform programmed recording:
into the TAPE 1 cassette com-
partment. Insert a blank tape
into the TAPE 2 cassette com-
partment.
1 Program discs and tracks (see page 23).
2 Press the
3 Press the
button.
) button to start recording.
/
(
To stop recording:
TAPE 1
TAPE 2
Press the (TAPE ) button.
The disc and tape will stop.
It is recommended that the recording tape is the same length as
the master tape.
ꢀ Recording from the radio
3 Press the TAPE (1
the display.
2) button until "TAPE 1" appears on
1 Tune in to the desired station (see page 28).
2 Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
4 Press the
button.
Recording will be paused.
Wind past the leader of the tape, on which recording cannot be
performed.
5 Press the
/
(
) button to start dubbing.
3 Press the
button.
Recording will be paused.
To stop dubbing:
Press the (TAPE ) button.
TAPE 1 and TAPE 2 will stop simultaneously.
4 Press the
/
(
) button to start recording.
ꢀ Erasing recorded tapes
To interrupt recording:
Press the button.
1
Load the tape to be erased into the TAPE 2 cassette compart-
ment with the side to be erased facing toward you.
Press the TAPE (1 2) button until "TAPE 2" appears on the dis-
play.
To resume recording, press the
/
(
) button.
2
To stop recording:
Press the (TAPE ) button.
3
4
Press the
Press the
button.
) button to start erasing.
/
(
Note:
If you hear a whistling noise while recording an AM station, move the
AM loop antenna.
Note:
Make sure that the TAPE 1 is not in use.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer and sleep operation
CD-SW200
Timer playback:
The unit turns on and plays the desired source (CD, tuner, tape) at a
preset time.
Timer recording:
CD-SW200
The unit turns on and starts recording from the tuner at the preset
time.
This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.
Once timer: Once timer play or once timer recording works for
one time only at a preset time.
For example, if you are away but want to record a program on a ra-
dio station.
ꢀ Timer playback or timer recording
Before setting timer:
Daily timer: Daily timer play or daily timer recording works at
1 Check that the clock is set to the correct time (refer to page 16).
If it is not set, you cannot use the timer function.
2 For timer playback: Load a cassette or discs to be played.
the same preset time every day.
For example, set the timer as a wake-up call every morning.
For timer recording: Load a cassette for recording in the cas-
sette compartment.
Using the once timer and daily timer in combination:
For example, use the once timer to record a radio program, and use
the daily timer to wake up.
1
2
Set the daily timer (pages 34 - 36).
Set the once timer (pages 34 - 36).
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
1 minute or more
Daily timer
3 Within 10 seconds, press the
or
button to se-
lect "ONCE" or "DAILY", and press the MEMORY/SET but-
ton.
Once timer
Start
Note:
Stop
Start
Stop
When set times for the daily timer and once timer overlap, the once
timer takes priority. Allow an interval of at least 1 minute between op-
erations.
Set the clock to the correct time if "ONCE" or "DAILY" does not
appear.
Continued to the next page
34
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-SW200
4 Within 10 seconds, press the
or
button to se-
9 Switch input with the
or
button, and then
lect "ONCE SET" or "DAILY SET", and press the MEMORY/
SET button.
press the MEMORY/SET button.
To select the timer playback source: CD, TUNER, TAPE 1 or
TAPE 2.
To select the timer recording source: TUNER.
ꢁWhen you select the tuner, select a station by pressing the
or
button, and then press the MEMORY/SET
5 Press the
or
button to select "PLAY" or
button.
"REC", and press the MEMORY/SET button.
ꢁIf a station has not been programmed, "NO PRESET" will be
displayed and timer setting will be canceled.
White
Red
10Adjust the volume using the VOLUME control, and then
press the MEMORY/SET button.
Do not turn the volume up too high.
The illustrations show the daily timer setting.
11Press the ON/STAND-BY button to enter the power stand-
6 Press the
or
button to adjust the hour and
by mode.
then press the MEMORY/SET button.
The "TIMER" indicator lights up and the unit is ready for timer
playback or timer recording.
The illustrations show the timer playback setting in the daily tim-
er mode.
7 Press the
or
button to adjust the minutes and
then press the MEMORY/SET button.
CD-SW200
Continued to the next page
8 Set the time to finish as in steps 6 and 7 above.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-SW200
Timer and sleep operation (continued)
Checking the timer setting in the timer stand-by mode:
12When the preset time is reached, playback or recording will
start.
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
"ONCE" or "DAILY", and press the MEMORY/SET button.
The volume will increase gradually until it reaches the preset
volume.
3 Within 10 seconds, press the or button to select
"ONCE CALL" or "DAILY CALL", and press the MEMORY/SET
13When the timer end time is reached, the system will enter
button.
the power stand-by mode automatically.
The unit returns to the timer stand-by mode after displaying the
settings in order.
Once timer:
The timer will be canceled.
Daily timer:
Canceling the timer setting in the timer stand-by mode:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
The timer will operate at the same time every day. It will contin-
ue until the daily timer setting is canceled. Cancel the daily tim-
er when it is not in use.
"ONCE" or "DAILY", and press the MEMORY/SET button.
3 Within 10 seconds, press the or button to select
"ONCE OFF" or "DAILY OFF", and press the MEMORY/SET but-
ton.
Timer will be canceled (the setting will not be canceled).
Note:
When performing timer playback or recording using another unit con-
nected to the GAME INPUT jacks, select "GAME" in step 9.
This unit will turn on or enter the power stand-by mode automatically,
however, the connected unit will not turn on or off.
Reusing the memorized timer setting:
The timer setting will be memorized once it is entered. To reuse the
same setting, perform the following operations.
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
"ONCE" or "DAILY", and press the MEMORY/SET button.
3 Within 10 seconds, press the or button to select
"ONCE ON" or "DAILY ON", and press the MEMORY/SET button.
4 Press the ON/STAND-BY button to enter the power stand-by
mode.
Note:
The timer can also be set with the remote control.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-SW200
To cancel the sleep operation:
ꢀ Sleep operation
The radio, CD, MP3/WMA disc and cassette tape can all be turned
off automatically.
Press the ON/STAND-BY button while "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
1 Play back the desired sound source.
2 Press the CLOCK/TIMER button.
3 Within 10 seconds, press the
1
2
While "SLEEP" is indicated, press the CLOCK/TIMER button.
Within 10 seconds, press the or button to select
"SLEEP OFF", and press the MEMORY/SET button.
or
button to select
"SLEEP", and press the MEMO-
RY/SET button.
ꢀ To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
4 Press the
or
button to select the time.
(Maximum: 3 hours - Minimum: 1 minute)
ꢁ3 hours - 5 minutes 5-minute intervals
ꢁ5 minutes - 1 minute 1-minute intervals
Sleep and timer recording:
For example, you can fall asleep listening to the CD and record radio
programs while sleeping.
5 Press the MEMORY/SET
button.
1
2
Set the sleep time (see left, steps 1 - 5).
"SLEEP" will appear.
While the sleep timer is set, set the timer playback or recording
(steps 2 - 10, pages 34 - 35).
6 The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
Timer playback or
The volume will be turned down 1 minute before the sleep op-
eration finishes.
recording setting
Sleep timer setting
End time
Desired time
To confirm the remaining sleep time:
1 minute - 3 hours
1
2
While "SLEEP" is indicated, press the CLOCK/TIMER button.
Within 10 seconds, press the
"SLEEP X : XX".
or
button to select
Sleep operation will
automatically stop.
Timer playback or recording
start time
"X : XX" is remaining sleep time.
Caution:
ꢁThe remaining sleep time is displayed for about 10 seconds.
ꢁYou can change the remaining sleep time while it is displayed by
pressing the MEMORY/SET button.
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the sleep
timer setting, timer playback or recording will not be possible.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Enhancing your system
CD-SW200
The connection cord is not included. Purchase a commercially avail-
able cord as shown below.
ꢀ Listening to playback sounds of Game, VCR,
DVD, etc.
Game, VCR,
DVD player, etc.
1 Connect a video game system, VCR, DVD, etc. to the front
GAME INPUT (VIDEO, AUDIO L and R) jacks.
2 Connect a TV to the rear VIDEO OUT jacks.
Switch the TV input to auxiliary.
CD-SW20
To the line output jacks
3 Press the ON/STAND-BY button to turn the power on.
4 Press the GAME/VIDEO button.
5 Play the connected equipment.
White
Yellow
Yellow White Red
You can enjoy sounds from the supplied speakers and images
on the TV.
Red
Note:
To prevent noise interference, place the unit away from the television.
RCA cord
(not supplied)
Video cable
(not supplied)
Auto power on function:
When you press any of the following buttons, the unit turns on.
ꢁGAME/VIDEO button (main unit and remote control): The unit
turns on and the "GAME" function is activated.
ꢁ
/
button on the main unit: The unit turns on and playback of
the last function starts (CD,TAPE,TUNER,GAME/VIDEO).
TV
ꢀ To record on a tape from game, VCR, etc.
1 Insert a cassette in the TAPE 2 cassette compartment.
2 Press the GAME/VIDEO button.
To video
input jack
Yellow
3 Press the
button.
4 Press the
/
(
) button.
Video cable
(not supplied)
5 Start the game system, VCR, etc.
Yellow
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting chart
CD-SW200
Many potential problems can be resolved by the owner without call-
ing a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
ꢀ Headphones
ꢁBefore plugging in or unplugging the headphones, reduce the vol-
ume.
ꢁBe sure your headphones have a 1/8" (3.5 mm) diameter plug and
impedance between 16 and 50 ohms. The recommended imped-
ance is 32 ohms.
ꢀ General
ꢁPlugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME control.
Symptom
ꢁThe clock is not set to the ꢁDid a power failure occur? Reset
correct time. the clock. (Refer to page 16.)
ꢁWhen a button is pressed, ꢁSet the unit to the power stand-
Possible cause
the unit does not respond.
by mode and then turn it back on.
ꢁIf the unit still malfunctions, reset
it. (Refer to page 41.)
CD-SW200
ꢁNo sound is heard.
ꢁIs the volume level set to "0"?
ꢁAre the headphones connected?
ꢁAre the speaker wires discon-
nected?
ꢀ CD player
Symptom
Possible cause
ꢁPlayback does not start. ꢁIs the disc loaded upside down?
ꢁPlayback stops in the mid- ꢁDoes the disc satisfy the stan-
dle or is not performed
properly.
dards?
ꢁIs the disc distorted or
scratched?
ꢁPlayback sounds are
skipped, or stopped in the
middle of a track.
ꢁIs the unit located near excessive
vibrations?
ꢁIs the disc very dirty?
ꢁHas condensation formed inside
the unit?
39
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-SW200
Troubleshooting chart (continued)
ꢀ Cassette deck
ꢀ Tuner
Symptom
Possible cause
Symptom
Possible cause
ꢁCannot record.
ꢁIs the erase-prevention tab re-
moved?
ꢁThe radio makes unusual ꢁIs the unit placed near the TV or
noises continuously.
computer?
ꢁCannot record tracks with ꢁIs it a normal tape? (You cannot
ꢁIs the FM antenna or AM loop an-
tenna placed properly? Move the
antenna away from the AC power
cord if it's located nearby.
proper sound quality.
ꢁCannot erase completely.
ꢁSound skipping.
record on a metal or CrO tape.)
ꢁIs there any slack?
ꢁIs the tape stretched?
ꢀ Condensation
ꢁCannot hear treble.
ꢁAre the capstans, pinch rollers,
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, tape heads, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc (or cassette) in the unit until normal
playback is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the unit.
or heads dirty?
ꢁSound fluctuation.
ꢁCannot remove the tape. ꢁIf a power failure occurs during
playback, the heads remain en-
gaged with the tape. Do not open
the compartment with great
force.
ꢀ Remote control
Symptom
Possible cause
ꢁThe remote control does ꢁIs the AC power cord of the unit
not operate.
plugged in?
ꢁIs the battery polarity correct?
ꢁAre the batteries dead?
ꢁIs the distance or angle incor-
rect?
ꢁDoes the remote control sensor
receive strong light?
40
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-SW200
ꢀ If trouble occurs
ꢀ Before transporting the unit
Remove all CDs from the unit. Make sure there is no CD in the disc
tray. Then, set the unit to the power stand-by mode. Carrying the unit
with discs left inside can damage the unit.
When this product is subjected to strong external interference (me-
chanical shock, excessive static electricity, abnormal supply voltage
due to lightning, etc.) or if it is operated incorrectly, it may malfunc-
tion.
If such a problem occurs, do the following:
ꢀ Care of compact discs
1
2
Set the unit to the stand-by mode and turn the power on again.
If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collec-
tion and player.
Note:
ꢁDo not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
ꢁKeep your discs away from direct sunlight, heat, and excessive
moisture.
ꢁAlways hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the center, along the radius.
If neither operation above restores the unit, clear all the memory by
resetting it.
ꢀ Clearing all the memory (reset)
1
Press the ON/STAND-BY button to enter the power stand-by
mode.
2
While pressing down the
button and the X-BASS (SUR-
ROUND)/DEMO button, press the TUNING
"CLEAR ALL" appears.
button until
NO
YES
Correct
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD program.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Specifications
CD-SW200
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product im-
provement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
ꢀ Cleaning the tape-handling parts
ꢁDirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
ꢁWhen cleaning the heads, pinch rollers, etc., unplug the unit which
contains high voltages.
ꢀ General
B
C
A
TAPE 1
Power source
AC 120 V, 60 Hz
Power consumption 195 W
Dimensions
Weight
Width: 10-1/4" (260 mm)
Height: 13" (330 mm)
Depth: 12-7/8" (326 mm)
E
B
C
D
TAPE 2
22.9 lbs. (10.4 kg)
ꢀ Amplifier
Output power
Playback head
Capstan
Pinch roller
Erase head
Recording/Playback head
Front Speaker: 115 watts minimum RMS per
channel into 6 ohms from 100Hz to 20 KHz,
10% total harmonic distortion.
Subwoofer: 220 watts RMS into 12 ohms
from 50Hz to 120 Hz, 10% total harmonic
distortion.
ꢁAfter long use, the deck's heads and capstans may become mag-
netised, causing poor sound. Demagnetize these parts once ev-
ery 30 hours of playing/recording time by using a commercial tape
head demagnetizer. Read the demagnetizer's instructions care-
fully before use.
Output terminals
Input terminals
Front Speakers: 6 ohms
Subwoofer: 12 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
ꢀ Cleaning the CD pickup lens
In order to ensure proper operation of the CD player, preventative
maintenance (cleaning of the laser pickup lens) should be performed
periodically. Lens cleaners are commercially available. Contact your
local CD software dealer for options.
Video output: 1Vp-p
Game/ Auxiliary (audio signal):
500 mV/ 47 k ohms
ꢀ Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap so-
lution, then with a dry cloth.
Game/Video: 1Vp-p
Caution:
ꢁDo not use chemicals for cleaning (gasoline, paint thinner, etc.). It
may damage the cabinet finish.
ꢁDo not apply oil to the inside of the unit. It may cause malfunc-
tions.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-SW200
ꢀ CD player
ꢀ Front Speaker
Type
5-disc multi-play compact disc player
Type
3-way type speaker system
Signal readout
Non-contact, 3-beam semiconductor laser
pickup
Super tweeter
2" (5 cm) tweeter
5-1/8" (13 cm) woofer
230 W
D/A converter
1-bit D/A converter
20 - 20,000 Hz
Frequency
response
Maximum input
power
Dynamic range
90 dB (1 kHz)
Rated input power 115 W
Impedance
Dimensions
6 ohms
ꢀ Tuner
Width: 7-1/16" (180 mm)
Height: 13" (330 mm)
Depth: 8-6/16" (212 mm)
Frequency range
FM: 87.5 - 108.0 MHz
AM: 530 - 1,720 kHz
Weight
6.6 lbs. (3.0 kg) /each
ꢀ Cassette deck
ꢀ Subwoofer
Frequency
response
50 - 14,000 Hz (normal tape)
Type
Full Range
Signal/noise ratio
55 dB (TAPE 1, playback)
50 dB (TAPE 2, recording/playback)
8" (20 cm) subwoofer
440 W
Maximum input
power
Wow and flutter
0.3 % (WRMS)
Rated input power 220 W
Impedance
Dimensions
12 ohms
Width: 9-13/16" (250 mm)
Height: 13" (330 mm)
Depth: 11-9/16" (294 mm)
Weight
13 lbs. (5.9 kg) /each
43
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when shipped in its original con-
tainer, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof
with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has
been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in
design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING
THE WARRANTIES OF MERCHANTABILITYAND FITNESS FOR USEARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any
warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser.
Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the
purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event
shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone
other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states
do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
Model Specific Section
Your Product Model Number & Description:
CD-SW200 Mini Component System
(Be sure to have this information available when you need service for your Product.)
One (1) year parts and labor from the date of purchase.
Non-functional accessories, supplies, and consumable items.
:
Warranty Period for this Product
Additional Item(s) Excluded from Warranty Coverage (if any):
Where to Obtain Service:
At a Sharp Authorized Servicer located in the United States.
To find a location of the nearest SharpAuthorized Servicer, call Sharp toll free at 1-800-BE-SHARP.
What to do to Obtain Service:
Ship prepaid or carry in your Product to a Sharp Authorized Servicer.
Be sure to have Proof of Purchase available. If you ship the Product, be sure it is insured and
packaged securely.
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP.
SHARP ELECTRONICS CORPORATION
Printed in Malaysia
TINSEA079AWZZ
04L R AS 1
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
Download from Www.Somanuals.com. All Manuals Search And Download.
|